X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/71d39e274f5c2847a1b2eedd4afa8e298029f93d..7962741d945c38aae17fe4e5f7ffdcabef5394da:/package/busybox/config/networking/Config.in diff --git a/package/busybox/config/networking/Config.in b/package/busybox/config/networking/Config.in index 14e6b5f79..99a8eddca 100644 --- a/package/busybox/config/networking/Config.in +++ b/package/busybox/config/networking/Config.in @@ -9,20 +9,86 @@ config BUSYBOX_CONFIG_FEATURE_IPV6 bool "Enable IPv6 support" default y help - Enable IPv6 support to busybox. This makes applets that talk IP - able to work with IPv6. + Enable IPv6 support in busybox. + This adds IPv6 support in the networking applets. + +config BUSYBOX_CONFIG_FEATURE_UNIX_LOCAL + bool "Enable Unix domain socket support (usually not needed)" + default n + help + Enable Unix domain socket support in all busybox networking + applets. Address of the form local:/path/to/unix/socket + will be recognized. + + This extension is almost never used in real world usage. + You most likely want to say N. + +config BUSYBOX_CONFIG_FEATURE_PREFER_IPV4_ADDRESS + bool "Prefer IPv4 addresses from DNS queries" + default y + depends on BUSYBOX_CONFIG_FEATURE_IPV6 + help + Use IPv4 address of network host if it has one. + + If this option is off, the first returned address will be used. + This may cause problems when your DNS server is IPv6-capable and + is returning IPv6 host addresses too. If IPv6 address + precedes IPv4 one in DNS reply, busybox network applets + (e.g. wget) will use IPv6 address. On an IPv6-incapable host + or network applets will fail to connect to the host + using IPv6 address. + +config BUSYBOX_CONFIG_VERBOSE_RESOLUTION_ERRORS + bool "Verbose resolution errors" + default y + help + Enable if you are not satisfied with simplistic + "can't resolve 'hostname.com'" and want to know more. + This may increase size of your executable a bit. + +config BUSYBOX_CONFIG_ARP + bool "arp" + default n + help + Manipulate the system ARP cache. config BUSYBOX_CONFIG_ARPING bool "arping" default y help - Ping hosts by ARP packets + Ping hosts by ARP packets. + +config BUSYBOX_CONFIG_BRCTL + bool "brctl" + default y + help + Manage ethernet bridges. + Supports addbr/delbr and addif/delif. + +config BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY + bool "Fancy options" + default y + depends on BUSYBOX_CONFIG_BRCTL + help + Add support for extended option like: + setageing, setfd, sethello, setmaxage, + setpathcost, setportprio, setbridgeprio, + stp + This adds about 600 bytes. + +config BUSYBOX_CONFIG_FEATURE_BRCTL_SHOW + bool "Support show" + default y + depends on BUSYBOX_CONFIG_BRCTL && BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY + help + Add support for option which prints the current config: + show config BUSYBOX_CONFIG_DNSD bool "dnsd" default n help - Small and static DNS server deamon. + Small and static DNS server daemon. config BUSYBOX_CONFIG_ETHER_WAKE bool "ether-wake" @@ -33,9 +99,34 @@ config BUSYBOX_CONFIG_ETHER_WAKE config BUSYBOX_CONFIG_FAKEIDENTD bool "fakeidentd" default n + select BUSYBOX_CONFIG_FEATURE_SYSLOG help - fakeidentd listens to the ident port and returns a set fake - value whatever it gets. + fakeidentd listens on the ident port and returns a predefined + fake value on any query. + +config BUSYBOX_CONFIG_FTPD + bool "ftpd" + default n + help + simple FTP daemon. You have to run it via inetd. + +config BUSYBOX_CONFIG_FEATURE_FTP_WRITE + bool "Enable upload commands" + default n + depends on BUSYBOX_CONFIG_FTPD + help + Enable all kinds of FTP upload commands (-w option) + +config BUSYBOX_CONFIG_FEATURE_FTPD_ACCEPT_BROKEN_LIST + bool "Enable workaround for RFC-violating clients" + default n + depends on BUSYBOX_CONFIG_FTPD + help + Some ftp-clients (among them KDE's Konqueror) issue illegal + "LIST -la" requests. This option works around those problems. + It might prevent you from listing files starting with "-" and + it increases the code size by ~40 bytes. + Most other ftp servers seem to behave similar to this. config BUSYBOX_CONFIG_FTPGET bool "ftpget" @@ -49,53 +140,44 @@ config BUSYBOX_CONFIG_FTPPUT help Store a remote file via FTP. +config BUSYBOX_CONFIG_FEATURE_FTPGETPUT_LONG_OPTIONS + bool "Enable long options in ftpget/ftpput" + default n + depends on BUSYBOX_CONFIG_LONG_OPTS && (BUSYBOX_CONFIG_FTPGET || BUSYBOX_CONFIG_FTPPUT) + help + Support long options for the ftpget/ftpput applet. + config BUSYBOX_CONFIG_HOSTNAME bool "hostname" default n help - Show or set the system's host name + Show or set the system's host name. config BUSYBOX_CONFIG_HTTPD bool "httpd" - default y + default n help Serve web pages via an HTTP server. -config BUSYBOX_CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY - bool " Support using httpd only from inetd" +config BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES + bool "Support 'Ranges:' header" default n depends on BUSYBOX_CONFIG_HTTPD help - This option disables uid and port options for the httpd applet - but requires inetd server daemon. + Makes httpd emit "Accept-Ranges: bytes" header and understand + "Range: bytes=NNN-[MMM]" header. Allows for resuming interrupted + downloads, seeking in multimedia players etc. -config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH - bool " Enable Basic http Authentication" - default y - depends on BUSYBOX_CONFIG_HTTPD - help - Utilizes password settings from /etc/httpd.conf for basic - authentication on a per url basis. - -config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5 - bool " Support MD5 crypted passwords for http Authentication" - default y - depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH - help - Enables basic per url authentication from /etc/httpd.conf - using md5 passwords. - -if !CONFIG_FEATURE_HTTPD_USAGE_FROM_INETD_ONLY -config BUSYBOX_CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP - bool " Support reloading the global config file using hup signal" - default y +config BUSYBOX_CONFIG_FEATURE_HTTPD_USE_SENDFILE + bool "Use sendfile system call" + default n depends on BUSYBOX_CONFIG_HTTPD help - This option enables processing of SIGHUP to reload cached - configuration settings. + When enabled, httpd will use the kernel sendfile() function + instead of read/write loop. config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID - bool " Enable support -u option" + bool "Enable -u option" default n depends on BUSYBOX_CONFIG_HTTPD help @@ -103,53 +185,85 @@ config BUSYBOX_CONFIG_FEATURE_HTTPD_SETUID rather than defaulting to the user that starts the server. Use of this option requires special privileges to change to a different user. -endif -config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_MIME_TYPES - bool " Support loading additional MIME types at run-time" - default y +config BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH + bool "Enable Basic http Authentication" + default n depends on BUSYBOX_CONFIG_HTTPD help - This option enables support for additional MIME types at - run-time to be specified in the configuration file. + Utilizes password settings from /etc/httpd.conf for basic + authentication on a per url basis. + +config BUSYBOX_CONFIG_FEATURE_HTTPD_AUTH_MD5 + bool "Support MD5 crypted passwords for http Authentication" + default n + depends on BUSYBOX_CONFIG_FEATURE_HTTPD_BASIC_AUTH + help + Enables basic per URL authentication from /etc/httpd.conf + using md5 passwords. config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI - bool " Support Common Gateway Interface (CGI)" - default y + bool "Support Common Gateway Interface (CGI)" + default n depends on BUSYBOX_CONFIG_HTTPD help This option allows scripts and executables to be invoked - when specific urls are requested. + when specific URLs are requested. config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR - bool " Enable support for running scripts through an interpreter" + bool "Support for running scripts through an interpreter" default n depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI help - This option enables support for running scripts through an - interpreter. Turn this on, if you want PHP scripts to work - properly. You need to supply an addition line in your httpd + This option enables support for running scripts through an + interpreter. Turn this on if you want PHP scripts to work + properly. You need to supply an additional line in your httpd config file: *.php:/path/to/your/php config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV - bool " Support the REMOTE_PORT environment variable for CGI" - default y + bool "Set REMOTE_PORT environment variable for CGI" + default n depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI help Use of this option can assist scripts in generating references that contain a unique port number. config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR - bool " Enable the -e option for shell script CGI simplification." - default y + bool "Enable -e option (useful for CGIs written as shell scripts)" + default n depends on BUSYBOX_CONFIG_HTTPD help - After set, this option allows html encoding arbitrary - strings for display of the browser. Output goes to stdout. - For example, httpd -e "" as + This option allows html encoding of arbitrary strings for display + by the browser. Output goes to stdout. + For example, httpd -e "" produces "<Hello World>". +config BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES + bool "Support for custom error pages" + default n + depends on BUSYBOX_CONFIG_HTTPD + help + This option allows you to define custom error pages in + the configuration file instead of the default HTTP status + error pages. For instance, if you add the line: + E404:/path/e404.html + in the config file, the server will respond the specified + '/path/e404.html' file instead of the terse '404 NOT FOUND' + message. + +config BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY + bool "Support for reverse proxy" + default n + depends on BUSYBOX_CONFIG_HTTPD + help + This option allows you to define URLs that will be forwarded + to another HTTP server. To setup add the following line to the + configuration file + P:/url/:http://hostname[:port]/new/path/ + Then a request to /url/myfile will be forwarded to + http://hostname[:port]/new/path/myfile. + config BUSYBOX_CONFIG_IFCONFIG bool "ifconfig" default y @@ -157,7 +271,7 @@ config BUSYBOX_CONFIG_IFCONFIG Ifconfig is used to configure the kernel-resident network interfaces. config BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS - bool " Enable status reporting output (+7k)" + bool "Enable status reporting output (+7k)" default y depends on BUSYBOX_CONFIG_IFCONFIG help @@ -165,15 +279,15 @@ config BUSYBOX_CONFIG_FEATURE_IFCONFIG_STATUS of the currently active interfaces. config BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP - bool " Enable slip-specific options \"keepalive\" and \"outfill\"" + bool "Enable slip-specific options \"keepalive\" and \"outfill\"" default n depends on BUSYBOX_CONFIG_IFCONFIG help - Allow "keepalive" and "outfill" support for SLIP. If you're not + Allow "keepalive" and "outfill" support for SLIP. If you're not planning on using serial lines, leave this unchecked. config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ - bool " Enable options \"mem_start\", \"io_addr\", and \"irq\"" + bool "Enable options \"mem_start\", \"io_addr\", and \"irq\"" default n depends on BUSYBOX_CONFIG_IFCONFIG help @@ -181,41 +295,64 @@ config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ and/or the interrupt line used by the specified device. config BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW - bool " Enable option \"hw\" (ether only)" + bool "Enable option \"hw\" (ether only)" default y depends on BUSYBOX_CONFIG_IFCONFIG help Set the hardware address of this interface, if the device driver - supports this operation. Currently, we only support the 'ether' + supports this operation. Currently, we only support the 'ether' class. config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS - bool " Set the broadcast automatically" + bool "Set the broadcast automatically" default y depends on BUSYBOX_CONFIG_IFCONFIG help Setting this will make ifconfig attempt to find the broadcast automatically if the value '+' is used. +config BUSYBOX_CONFIG_IFENSLAVE + bool "ifenslave" + default n + help + Userspace application to bind several interfaces + to a logical interface (use with kernel bonding driver). + +config BUSYBOX_CONFIG_IFPLUGD + bool "ifplugd" + default n + help + Network interface plug detection daemon. + config BUSYBOX_CONFIG_IFUPDOWN bool "ifupdown" default n - select BUSYBOX_CONFIG_RUN_PARTS help - Activate or deactivate the specified interfaces. This applet makes + Activate or deactivate the specified interfaces. This applet makes use of either "ifconfig" and "route" or the "ip" command to actually - configure network interfaces. Therefore, you will probably also want - to enable either BUSYBOX_CONFIG_IFCONFIG and BUSYBOX_CONFIG_ROUTE, or enable - BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP and the various BUSYBOX_CONFIG_IP options. Of + configure network interfaces. Therefore, you will probably also want + to enable either IFCONFIG and ROUTE, or enable + FEATURE_IFUPDOWN_IP and the various IP options. Of course you could use non-busybox versions of these programs, so against my better judgement (since this will surely result in plenty of support questions on the mailing list), I do not force you to - enable these additional options. It is up to you to supply either - "ifconfig" and "route" or the "ip" command, either via busybox or via - standalone utilities. + enable these additional options. It is up to you to supply either + "ifconfig", "route" and "run-parts" or the "ip" command, either + via busybox or via standalone utilities. + +config BUSYBOX_CONFIG_IFUPDOWN_IFSTATE_PATH + string "Absolute path to ifstate file" + default n + depends on BUSYBOX_CONFIG_IFUPDOWN + help + ifupdown keeps state information in a file called ifstate. + Typically it is located in /var/run/ifstate, however + some distributions tend to put it in other places + (debian, for example, uses /etc/network/run/ifstate). + This config option defines location of ifstate. config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP - bool " Use ip applet" + bool "Use ip applet" default n depends on BUSYBOX_CONFIG_IFUPDOWN help @@ -223,7 +360,7 @@ config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP than the default of using the older 'ifconfig' and 'route' utilities. config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN - bool " Use busybox ip applet" + bool "Use busybox ip applet" default n depends on BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP select BUSYBOX_CONFIG_IP @@ -233,238 +370,285 @@ config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN help Use the busybox iproute "ip" applet to implement "ifupdown". - If leave this disabled, you must install the full-blown iproute2 + If left disabled, you must install the full-blown iproute2 utility or the "ifup" and "ifdown" applets will not work. -config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP_BUILTIN - bool " Use busybox ifconfig and route applets" +config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN + bool "Use busybox ifconfig and route applets" default n - depends on BUSYBOX_CONFIG_IFUPDOWN && !CONFIG_FEATURE_IFUPDOWN_IP + depends on BUSYBOX_CONFIG_IFUPDOWN && !BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IP select BUSYBOX_CONFIG_IFCONFIG select BUSYBOX_CONFIG_ROUTE help Use the busybox iproute "ifconfig" and "route" applets to implement the "ifup" and "ifdown" utilities. - If leave this disabled, you must install the full-blown ifconfig + If left disabled, you must install the full-blown ifconfig and route utilities, or the "ifup" and "ifdown" applets will not work. config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4 - bool " Enable support for IPv4" + bool "Support for IPv4" default n depends on BUSYBOX_CONFIG_IFUPDOWN help - If you want busybox to talk IPv4, leave this on. + If you want ifup/ifdown to talk IPv4, leave this on. config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6 - bool " Enable support for IPv6" + bool "Support for IPv6" default n - depends on BUSYBOX_CONFIG_IFUPDOWN + depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_FEATURE_IPV6 help If you need support for IPv6, turn this option on. -config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPX - bool " Enable support for IPX" - default n - depends on BUSYBOX_CONFIG_IFUPDOWN - help - If this option is selected you can use busybox to work with IPX - networks. +### UNUSED +###config FEATURE_IFUPDOWN_IPX +### bool "Support for IPX" +### default n +### depends on IFUPDOWN +### help +### If this option is selected you can use busybox to work with IPX +### networks. config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING - bool " Enable mapping support" + bool "Enable mapping support" default n depends on BUSYBOX_CONFIG_IFUPDOWN help This enables support for the "mapping" stanza, unless you have a weird network setup you don't need it. +config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP + bool "Support for external dhcp clients" + default n + depends on BUSYBOX_CONFIG_IFUPDOWN + help + This enables support for the external dhcp clients. Clients are + tried in the following order: dhcpcd, dhclient, pump and udhcpc. + Otherwise, if udhcpc applet is enabled, it is used. + Otherwise, ifup/ifdown will have no support for DHCP. + config BUSYBOX_CONFIG_INETD bool "inetd" default n + select BUSYBOX_CONFIG_FEATURE_SYSLOG help Internet superserver daemon -config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_ECHO - bool " Support echo service" +config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_ECHO + bool "Support echo service" default n depends on BUSYBOX_CONFIG_INETD help Echo received data internal inetd service -config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_DISCARD - bool " Support discard service" +config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DISCARD + bool "Support discard service" default n depends on BUSYBOX_CONFIG_INETD help Internet /dev/null internal inetd service -config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_TIME - bool " Support time service" +config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_TIME + bool "Support time service" default n depends on BUSYBOX_CONFIG_INETD help Return 32 bit time since 1900 internal inetd service -config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_DAYTIME - bool " Support daytime service" +config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_DAYTIME + bool "Support daytime service" default n depends on BUSYBOX_CONFIG_INETD help Return human-readable time internal inetd service -config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BILTIN_CHARGEN - bool " Support chargen service" +config BUSYBOX_CONFIG_FEATURE_INETD_SUPPORT_BUILTIN_CHARGEN + bool "Support chargen service" default n depends on BUSYBOX_CONFIG_INETD help Familiar character generator internal inetd service config BUSYBOX_CONFIG_FEATURE_INETD_RPC - bool " Support RPC services" + bool "Support RPC services" default n depends on BUSYBOX_CONFIG_INETD + select BUSYBOX_CONFIG_FEATURE_HAVE_RPC help - Suuport Sun-RPC based services - + Support Sun-RPC based services config BUSYBOX_CONFIG_IP bool "ip" default n help The "ip" applet is a TCP/IP interface configuration and routing - utility. You generally don't need "ip" to use busybox with + utility. You generally don't need "ip" to use busybox with TCP/IP. -if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPADDR - config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS - default n - comment " address (forced enabled for ipaddr)" -endif -if ! (CONFIG_IP && BUSYBOX_CONFIG_IPADDR) - config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS - bool " address" - default n - depends on BUSYBOX_CONFIG_IP - help - Address manipulation support for the "ip" applet. -endif - -if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPLINK - config BUSYBOX_CONFIG_FEATURE_IP_LINK - default n - comment " link (forced enabled for iplink)" -endif -if !(CONFIG_IP && BUSYBOX_CONFIG_IPLINK) - config BUSYBOX_CONFIG_FEATURE_IP_LINK - bool " link" - default n - depends on BUSYBOX_CONFIG_IP - help - Configure network devices with "ip". -endif - -if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPROUTE - config BUSYBOX_CONFIG_FEATURE_IP_ROUTE - default n - comment " route (forced enabled for iproute)" -endif -if !(CONFIG_IP && BUSYBOX_CONFIG_IPROUTE) - config BUSYBOX_CONFIG_FEATURE_IP_ROUTE - bool " route" - default n - depends on BUSYBOX_CONFIG_IP - help - Add support for routing table management to "ip". -endif - -if BUSYBOX_CONFIG_IP && BUSYBOX_CONFIG_IPTUNNEL - config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL - default n - comment " tunnel (forced enabled for iptunnel)" -endif -if !(CONFIG_IP && BUSYBOX_CONFIG_IPTUNNEL) - config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL - bool " tunnel" - default n - depends on BUSYBOX_CONFIG_IP - help - Add support for tunneling commands to "ip". -endif +config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS + bool "ip address" + default n + depends on BUSYBOX_CONFIG_IP + help + Address manipulation support for the "ip" applet. -config BUSYBOX_CONFIG_IPCALC - bool "ipcalc" - default y +config BUSYBOX_CONFIG_FEATURE_IP_LINK + bool "ip link" + default n + depends on BUSYBOX_CONFIG_IP help - ipcalc takes an IP address and netmask and calculates the - resulting broadcast, network, and host range. + Configure network devices with "ip". -config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY - bool " Fancy IPCALC, more options, adds 1 kbyte" - default y - depends on BUSYBOX_CONFIG_IPCALC +config BUSYBOX_CONFIG_FEATURE_IP_ROUTE + bool "ip route" + default n + depends on BUSYBOX_CONFIG_IP help - Adds the options hostname, prefix and silent to the output of "ipcalc". + Add support for routing table management to "ip". -config BUSYBOX_CONFIG_IPADDR - bool "ipaddr" +config BUSYBOX_CONFIG_FEATURE_IP_TUNNEL + bool "ip tunnel" default n + depends on BUSYBOX_CONFIG_IP help - Equivalent to selecting address support to "ip", above. + Add support for tunneling commands to "ip". -config BUSYBOX_CONFIG_IPLINK - bool "iplink" +config BUSYBOX_CONFIG_FEATURE_IP_RULE + bool "ip rule" default n + depends on BUSYBOX_CONFIG_IP help - Equivalent to selecting link support to "ip", above. + Add support for rule commands to "ip". -config BUSYBOX_CONFIG_IPROUTE - bool "iproute" +config BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS + bool "Support short forms of ip commands" + default n + depends on BUSYBOX_CONFIG_IP + help + Also support short-form of ip commands: + ip addr -> ipaddr + ip link -> iplink + ip route -> iproute + ip tunnel -> iptunnel + ip rule -> iprule + + Say N unless you desparately need the short form of the ip + object commands. + +config BUSYBOX_CONFIG_FEATURE_IP_RARE_PROTOCOLS + bool "Support displaying rarely used link types" default n + depends on BUSYBOX_CONFIG_IP help - Equivalent to selecting route support to "ip", above. + If you are not going to use links of type "frad", "econet", + "bif" etc, you probably don't need to enable this. + Ethernet, wireless, infrared, ppp/slip, ip tunnelling + link types are supported without this option selected. + +config BUSYBOX_CONFIG_IPADDR + bool + default n + depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ADDRESS + +config BUSYBOX_CONFIG_IPLINK + bool + default n + depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_LINK + +config BUSYBOX_CONFIG_IPROUTE + bool + default n + depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_ROUTE config BUSYBOX_CONFIG_IPTUNNEL - bool "iptunnel" + bool + default n + depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_TUNNEL + +config BUSYBOX_CONFIG_IPRULE + bool + default n + depends on BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS && BUSYBOX_CONFIG_FEATURE_IP_RULE + +config BUSYBOX_CONFIG_IPCALC + bool "ipcalc" default n help - Equivalent to selecting tunnel support to "ip", above. + ipcalc takes an IP address and netmask and calculates the + resulting broadcast, network, and host range. + +config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY + bool "Fancy IPCALC, more options, adds 1 kbyte" + default n + depends on BUSYBOX_CONFIG_IPCALC + help + Adds the options hostname, prefix and silent to the output of + "ipcalc". + +config BUSYBOX_CONFIG_FEATURE_IPCALC_LONG_OPTIONS + bool "Enable long options" + default n + depends on BUSYBOX_CONFIG_IPCALC && BUSYBOX_CONFIG_LONG_OPTS + help + Support long options for the ipcalc applet. config BUSYBOX_CONFIG_NAMEIF bool "nameif" default n + select BUSYBOX_CONFIG_FEATURE_SYSLOG help nameif is used to rename network interface by its MAC address. Renamed interfaces MUST be in the down state. It is possible to use a file (default: /etc/mactab) with list of new interface names and MACs. - Maximum interface name length: IF_NAMESIZE = 16 + Maximum interface name length: IFNAMSIZ = 16 File fields are separated by space or tab. File format: # Comment new_interface_name XX:XX:XX:XX:XX:XX +config BUSYBOX_CONFIG_FEATURE_NAMEIF_EXTENDED + bool "Extended nameif" + default n + depends on BUSYBOX_CONFIG_NAMEIF + help + This extends the nameif syntax to support the bus_info and driver + checks. The syntax is compatible to the normal nameif. + File format: + new_interface_name driver=asix bus=usb-0000:00:08.2-3 + new_interface_name bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5 + new_interface_name mac=00:80:C8:38:91:B5 + new_interface_name 00:80:C8:38:91:B5 + config BUSYBOX_CONFIG_NC bool "nc" default y help A simple Unix utility which reads and writes data across network connections. - + config BUSYBOX_CONFIG_NETMSG bool "netmsg" default y help simple program for sending udp broadcast messages -config BUSYBOX_CONFIG_NC_GAPING_SECURITY_HOLE - bool "gaping security hole" +config BUSYBOX_CONFIG_NC_SERVER + bool "Netcat server options (-l)" + default n + depends on BUSYBOX_CONFIG_NC + help + Allow netcat to act as a server. + +config BUSYBOX_CONFIG_NC_EXTRA + bool "Netcat extensions (-eiw and filename)" default n depends on BUSYBOX_CONFIG_NC help - Add support for executing a program after making or receiving a - successful connection (-e option). + Add -e (support for executing the rest of the command line after + making or receiving a successful connection), -i (delay interval for + lines sent), -w (timeout for initial connection). config BUSYBOX_CONFIG_NETSTAT bool "netstat" @@ -472,12 +656,42 @@ config BUSYBOX_CONFIG_NETSTAT help netstat prints information about the Linux networking subsystem. +config BUSYBOX_CONFIG_FEATURE_NETSTAT_WIDE + bool "Enable wide netstat output" + default y + depends on BUSYBOX_CONFIG_NETSTAT + help + Add support for wide columns. Useful when displaying IPv6 addresses + (-W option). + +config BUSYBOX_CONFIG_FEATURE_NETSTAT_PRG + bool "Enable PID/Program name output" + default y + depends on BUSYBOX_CONFIG_NETSTAT + help + Add support for -p flag to print out PID and program name. + +700 bytes of code. + config BUSYBOX_CONFIG_NSLOOKUP bool "nslookup" default y help nslookup is a tool to query Internet name servers. +config BUSYBOX_CONFIG_NTPD + bool "ntpd" + default n + help + The NTP client/server daemon. + +config BUSYBOX_CONFIG_FEATURE_NTPD_SERVER + bool "Make ntpd usable as a NTP server" + default n + depends on BUSYBOX_CONFIG_NTPD + help + Make ntpd usable as a NTP server. If you disable this option + ntpd will be usable only as a NTP client. + config BUSYBOX_CONFIG_PING bool "ping" default y @@ -485,35 +699,50 @@ config BUSYBOX_CONFIG_PING ping uses the ICMP protocol's mandatory ECHO_REQUEST datagram to elicit an ICMP ECHO_RESPONSE from a host or gateway. -config BUSYBOX_CONFIG_FEATURE_FANCY_PING - bool " Enable fancy ping output" - default y - depends on BUSYBOX_CONFIG_PING - help - Make the output from the ping applet include statistics, and at the - same time provide full support for ICMP packets. - config BUSYBOX_CONFIG_PING6 bool "ping6" default y - depends on BUSYBOX_CONFIG_FEATURE_IPV6 + depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_PING help This will give you a ping that can talk IPv6. -config BUSYBOX_CONFIG_FEATURE_FANCY_PING6 - bool " Enable fancy ping6 output" +config BUSYBOX_CONFIG_FEATURE_FANCY_PING + bool "Enable fancy ping output" default y - depends on BUSYBOX_CONFIG_PING6 + depends on BUSYBOX_CONFIG_PING help - Make the output from the ping6 applet include statistics, and at the + Make the output from the ping applet include statistics, and at the same time provide full support for ICMP packets. +config BUSYBOX_CONFIG_PSCAN + bool "pscan" + default n + help + Simple network port scanner. + config BUSYBOX_CONFIG_ROUTE bool "route" default y help Route displays or manipulates the kernel's IP routing tables. +config BUSYBOX_CONFIG_SLATTACH + bool "slattach" + default n + help + slattach is a small utility to attach network interfaces to serial + lines. + +#config TC +# bool "tc" +# default n +# help +# show / manipulate traffic control settings +# +#config FEATURE_TC_INGRESS +# def_bool n +# depends on TC + config BUSYBOX_CONFIG_TELNET bool "telnet" default y @@ -522,16 +751,16 @@ config BUSYBOX_CONFIG_TELNET used to test other simple protocols. config BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE - bool " Pass TERM type to remote host" + bool "Pass TERM type to remote host" default y depends on BUSYBOX_CONFIG_TELNET help Setting this option will forward the TERM environment variable to the - remote host you are connecting to. This is useful to make sure that + remote host you are connecting to. This is useful to make sure that things like ANSI colors and other control sequences behave. config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN - bool " Pass USER type to remote host" + bool "Pass USER type to remote host" default n depends on BUSYBOX_CONFIG_TELNET help @@ -543,19 +772,20 @@ config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN config BUSYBOX_CONFIG_TELNETD bool "telnetd" default y + select BUSYBOX_CONFIG_FEATURE_SYSLOG help A daemon for the TELNET protocol, allowing you to log onto the host - running the daemon. Please keep in mind that the TELNET protocol - sends passwords in plain text. If you can't afford the space for an - SSH daemon and you trust your network, you may say 'y' here. As a + running the daemon. Please keep in mind that the TELNET protocol + sends passwords in plain text. If you can't afford the space for an + SSH daemon and you trust your network, you may say 'y' here. As a more secure alternative, you should seriously consider installing the very small Dropbear SSH daemon instead: http://matt.ucc.asn.au/dropbear/dropbear.html Note that for busybox telnetd to work you need several things: First of all, your kernel needs: - BUSYBOX_CONFIG_UNIX98_PTYS=y - BUSYBOX_CONFIG_DEVPTS_FS=y + UNIX98_PTYS=y + DEVPTS_FS=y Next, you need a /dev/pts directory on your root filesystem: @@ -572,8 +802,8 @@ config BUSYBOX_CONFIG_TELNETD mount -t devpts devpts /dev/pts - You need to be sure that Busybox has BUSYBOX_CONFIG_LOGIN and - BUSYBOX_CONFIG_FEATURE_SUID enabled. And finally, you should make + You need to be sure that Busybox has LOGIN and + FEATURE_SUID enabled. And finally, you should make certain that Busybox has been installed setuid root: chown root.root /bin/busybox @@ -582,70 +812,116 @@ config BUSYBOX_CONFIG_TELNETD with all that done, telnetd _should_ work.... -config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD - bool " Support call from inetd only" - default n +config BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE + bool "Support standalone telnetd (not inetd only)" + default y depends on BUSYBOX_CONFIG_TELNETD help - Selecting this will make telnetd only callable from inetd, - removing the standalone support. + Selecting this will make telnetd able to run standalone. + +config BUSYBOX_CONFIG_FEATURE_TELNETD_INETD_WAIT + bool "Support -w SEC option (inetd wait mode)" + default n + depends on BUSYBOX_CONFIG_FEATURE_TELNETD_STANDALONE + help + This option allows you to run telnetd in "inet wait" mode. + Example inetd.conf line (note "wait", not usual "nowait"): + + telnet stream tcp wait root /bin/telnetd telnetd -w10 + + In this example, inetd passes _listening_ socket_ as fd 0 + to telnetd when connection appears. + telnetd will wait for connections until all existing + connections are closed, and no new connections + appear during 10 seconds. Then it exits, and inetd continues + to listen for new connections. + + This option is rarely used. "tcp nowait" is much more usual + way of running tcp services, including telnetd. + You most probably want to say N here. config BUSYBOX_CONFIG_TFTP bool "tftp" default n help - This enables the Trivial File Transfer Protocol client program. TFTP + This enables the Trivial File Transfer Protocol client program. TFTP is usually used for simple, small transfers such as a root image for a network-enabled bootloader. +config BUSYBOX_CONFIG_TFTPD + bool "tftpd" + default n + help + This enables the Trivial File Transfer Protocol server program. + It expects that stdin is a datagram socket and a packet + is already pending on it. It will exit after one transfer. + In other words: it should be run from inetd in nowait mode, + or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR" + config BUSYBOX_CONFIG_FEATURE_TFTP_GET - bool " Enable \"get\" command" + bool "Enable \"get\" command" default n - depends on BUSYBOX_CONFIG_TFTP + depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD help - Add support for the GET command within the TFTP client. This allows + Add support for the GET command within the TFTP client. This allows a client to retrieve a file from a TFTP server. + Also enable upload support in tftpd, if tftpd is selected. config BUSYBOX_CONFIG_FEATURE_TFTP_PUT - bool " Enable \"put\" command" + bool "Enable \"put\" command" default n - depends on BUSYBOX_CONFIG_TFTP + depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD help - Add support for the PUT command within the TFTP client. This allows + Add support for the PUT command within the TFTP client. This allows a client to transfer a file to a TFTP server. + Also enable download support in tftpd, if tftpd is selected. config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE - bool " Enable \"blocksize\" command" + bool "Enable 'blksize' and 'tsize' protocol options" default n - depends on BUSYBOX_CONFIG_TFTP + depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD help - Allow the client to specify the desired block size for transfers. + Allow tftp to specify block size, and tftpd to understand + "blksize" and "tsize" options. -config BUSYBOX_CONFIG_FEATURE_TFTP_DEBUG - bool " Enable debug" +config BUSYBOX_CONFIG_FEATURE_TFTP_PROGRESS_BAR + bool "Enable tftp progress meter" default n - depends on BUSYBOX_CONFIG_TFTP + depends on BUSYBOX_CONFIG_TFTP && BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE help - Enable debug settings for tftp. This is useful if you're running - into problems with tftp as the protocol doesn't help you much when - you run into problems. + Show progress bar. + +config BUSYBOX_CONFIG_TFTP_DEBUG + bool "Enable debug" + default n + depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD + help + Make tftp[d] print debugging messages on stderr. + This is useful if you are diagnosing a bug in tftp[d]. config BUSYBOX_CONFIG_TRACEROUTE bool "traceroute" default y help - Utility to trace the route of IP packets + Utility to trace the route of IP packets. + +config BUSYBOX_CONFIG_TRACEROUTE6 + bool "traceroute6" + default n + depends on BUSYBOX_CONFIG_FEATURE_IPV6 && BUSYBOX_CONFIG_TRACEROUTE + help + Utility to trace the route of IPv6 packets. config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE - bool " Enable verbose output" + bool "Enable verbose output" default y depends on BUSYBOX_CONFIG_TRACEROUTE help - Add some verbosity to traceroute. This includes amongst other things + Add some verbosity to traceroute. This includes among other things hostnames and ICMP response types. config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE - bool " Enable loose source route" + bool "Enable loose source route" default n depends on BUSYBOX_CONFIG_TRACEROUTE help @@ -653,12 +929,22 @@ config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE (8 maximum). config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_USE_ICMP - bool " Use ICMP instead of UDP" + bool "Use ICMP instead of UDP" default n depends on BUSYBOX_CONFIG_TRACEROUTE help - Add feature to allow for ICMP ECHO instead of UDP datagrams. + Add option -I to use ICMP ECHO instead of UDP datagrams. + +source package/busybox/config/networking/udhcp/Config.in +config BUSYBOX_CONFIG_IFUPDOWN_UDHCPC_CMD_OPTIONS + string "ifup udhcpc command line options" + default "-R -n" + depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_UDHCPC + help + Command line options to pass to udhcpc from ifup. + Intended to alter options not available in /etc/network/interfaces. + (IE: --syslog --background etc...) config BUSYBOX_CONFIG_VCONFIG bool "vconfig" @@ -674,31 +960,30 @@ config BUSYBOX_CONFIG_WGET HTTPS, and FTP servers. config BUSYBOX_CONFIG_FEATURE_WGET_STATUSBAR - bool " Enable a nifty process meter (+2k)" + bool "Enable a nifty process meter (+2k)" default y depends on BUSYBOX_CONFIG_WGET help Enable the transfer progress bar for wget transfers. config BUSYBOX_CONFIG_FEATURE_WGET_AUTHENTICATION - bool " Enable HTTP authentication" + bool "Enable HTTP authentication" default y depends on BUSYBOX_CONFIG_WGET help Support authenticated HTTP transfers. -config BUSYBOX_CONFIG_FEATURE_WGET_IP6_LITERAL - bool " Enable IPv6 literal addresses" +config BUSYBOX_CONFIG_FEATURE_WGET_LONG_OPTIONS + bool "Enable long options" default y - depends on BUSYBOX_CONFIG_WGET + depends on BUSYBOX_CONFIG_WGET && BUSYBOX_CONFIG_LONG_OPTS help - Support IPv6 address literal notation in URLs. - -source package/busybox/config/networking/udhcp/Config.in + Support long options for the wget applet. config BUSYBOX_CONFIG_ZCIP bool "zcip" default n + select BUSYBOX_CONFIG_FEATURE_SYSLOG help ZCIP provides ZeroConf IPv4 address selection, according to RFC 3927. It's a daemon that allocates and defends a dynamically assigned @@ -707,5 +992,32 @@ config BUSYBOX_CONFIG_ZCIP See http://www.zeroconf.org for further details, and "zcip.script" in the busybox examples. -endmenu +config BUSYBOX_CONFIG_TCPSVD + bool "tcpsvd" + default n + help + tcpsvd listens on a TCP port and runs a program for each new + connection. +config BUSYBOX_CONFIG_TUNCTL + bool "tunctl" + default n + help + tunctl creates or deletes tun devices. + +config BUSYBOX_CONFIG_FEATURE_TUNCTL_UG + bool "Support owner:group assignment" + default n + depends on BUSYBOX_CONFIG_TUNCTL + help + Allow to specify owner and group of newly created interface. + 340 bytes of pure bloat. Say no here. + +config BUSYBOX_CONFIG_UDPSVD + bool "udpsvd" + default n + help + udpsvd listens on an UDP port and runs a program for each new + connection. + +endmenu