X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/723aeefa6805e5ad4193fc51c5ba752fd1d39963..73723cbc1d095fcf1b24687078abe6549467cd98:/package/linux-atm/patches/700-libtoolize.patch diff --git a/package/linux-atm/patches/700-libtoolize.patch b/package/linux-atm/patches/700-libtoolize.patch index e283c9ff9..65a840d68 100644 --- a/package/linux-atm/patches/700-libtoolize.patch +++ b/package/linux-atm/patches/700-libtoolize.patch @@ -1,8 +1,11 @@ ---- linux-atm-2.4.1.orig/aclocal.m4 2007-10-20 20:43:45.000000000 +0200 -+++ linux-atm-2.4.1/aclocal.m4 2007-10-20 20:45:30.000000000 +0200 -@@ -1,993 +1,6 @@ +Index: linux-atm-2.4.1/aclocal.m4 +=================================================================== +--- linux-atm-2.4.1.orig/aclocal.m4 2007-10-20 21:45:35.714867704 +0200 ++++ linux-atm-2.4.1/aclocal.m4 2007-10-20 21:46:56.439467936 +0200 +@@ -1,989 +1,21 @@ -dnl aclocal.m4 generated automatically by aclocal 1.4-p6 -- ++# generated automatically by aclocal 1.9.6 -*- Autoconf -*- + -dnl Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. -dnl This file is free software; the Free Software Foundation -dnl gives unlimited permission to copy and/or distribute it, @@ -895,8 +898,13 @@ -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2, or (at your option) -# any later version. -- --# This program is distributed in the hope that it will be useful, ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, ++# 2005 Free Software Foundation, Inc. ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. + + # This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. @@ -976,8 +984,12 @@ - AC_MSG_RESULT(missing) -fi -AC_SUBST($1)]) -- -- ++# but WITHOUT ANY WARRANTY, to the extent permitted by law; without ++# even the implied warranty of MERCHANTABILITY or FITNESS FOR A ++# PARTICULAR PURPOSE. + ++# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- + -dnl AM_PROG_LEX -dnl Look for flex, lex or missing, then run AC_PROG_LEX and AC_DECL_YYTEXT -AC_DEFUN([AM_PROG_LEX], @@ -985,12 +997,40875 @@ -AC_CHECK_PROGS(LEX, flex lex, $missing_dir/missing flex) -AC_PROG_LEX -AC_DECL_YYTEXT]) ++# serial 48 Debian 1.5.22-4 AC_PROG_LIBTOOL + +-# libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- ++libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- + + # serial 47 AC_PROG_LIBTOOL + # Debian $Rev: 9373 $ +@@ -1096,7 +128,7 @@ + + # Sed substitution that helps us do robust quoting. It backslashifies + # metacharacters that are still active within double-quoted strings. +-Xsed='sed -e s/^X//' ++Xsed='sed -e 1s/^X//' + [sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g'] + + # Same as above, but do not quote variable references. +@@ -1116,7 +148,7 @@ + default_ofile=libtool + can_build_shared=yes + +-# All known linkers require a `.a' archive for static linking (except M$VC, ++# All known linkers require a `.a' archive for static linking (except MSVC, + # which needs '.lib'). + libext=a + ltmain="$ac_aux_dir/ltmain.sh" +@@ -1136,6 +168,7 @@ + test -z "$AS" && AS=as + test -z "$CC" && CC=cc + test -z "$LTCC" && LTCC=$CC ++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS + test -z "$DLLTOOL" && DLLTOOL=dlltool + test -z "$LD" && LD=ld + test -z "$LN_S" && LN_S="ln -s" +@@ -1155,15 +188,17 @@ + if test -n "$RANLIB"; then + case $host_os in + openbsd*) +- old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" + ;; + *) +- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" + ;; + esac + old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" + fi + ++_LT_CC_BASENAME([$compiler]) ++ + # Only perform the check for file, if the check method requires it + case $deplibs_check_method in + file_magic*) +@@ -1204,11 +239,56 @@ + # If no C compiler was specified, use CC. + LTCC=${LTCC-"$CC"} + ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++ + # Allow CC to be a program name with arguments. + compiler=$CC + ])# _LT_AC_SYS_COMPILER + + ++# _LT_CC_BASENAME(CC) ++# ------------------- ++# Calculate cc_basename. Skip known compiler wrappers and cross-prefix. ++AC_DEFUN([_LT_CC_BASENAME], ++[for cc_temp in $1""; do ++ case $cc_temp in ++ compile | *[[\\/]]compile | ccache | *[[\\/]]ccache ) ;; ++ distcc | *[[\\/]]distcc | purify | *[[\\/]]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++]) ++ ++ ++# _LT_COMPILER_BOILERPLATE ++# ------------------------ ++# Check for compiler boilerplate output or warnings with ++# the simple compiler test code. ++AC_DEFUN([_LT_COMPILER_BOILERPLATE], ++[ac_outfile=conftest.$ac_objext ++printf "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$rm conftest* ++])# _LT_COMPILER_BOILERPLATE ++ ++ ++# _LT_LINKER_BOILERPLATE ++# ---------------------- ++# Check for linker boilerplate output or warnings with ++# the simple link test code. ++AC_DEFUN([_LT_LINKER_BOILERPLATE], ++[ac_outfile=conftest.$ac_objext ++printf "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$rm conftest* ++])# _LT_LINKER_BOILERPLATE ++ ++ + # _LT_AC_SYS_LIBPATH_AIX + # ---------------------- + # Links a minimal program and checks the executable +@@ -1281,15 +361,15 @@ + + # The HP-UX ksh and POSIX shell print the target directory to stdout + # if CDPATH is set. +-if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + if test -z "$ECHO"; then + if test "X${echo_test_string+set}" != Xset; then + # find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "[$]0"' 'sed 20q "[$]0"' 'sed 10q "[$]0"' 'sed 2q "[$]0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... +- if (echo_test_string="`eval $cmd`") 2>/dev/null && +- echo_test_string="`eval $cmd`" && ++ if (echo_test_string=`eval $cmd`) 2>/dev/null && ++ echo_test_string=`eval $cmd` && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break +@@ -1458,7 +538,7 @@ + # Find out which ABI we are using. + echo 'int i;' > conftest.$ac_ext + if AC_TRY_EVAL(ac_compile); then +- case "`/usr/bin/file conftest.o`" in ++ case `/usr/bin/file conftest.o` in + *32-bit*) + case $host in + x86_64-*linux*) +@@ -1509,6 +589,22 @@ + CFLAGS="$SAVE_CFLAGS" + fi + ;; ++sparc*-*solaris*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if AC_TRY_EVAL(ac_compile); then ++ case `/usr/bin/file conftest.o` in ++ *64-bit*) ++ case $lt_cv_prog_gnu_ld in ++ yes*) LD="${LD-ld} -m elf64_sparc" ;; ++ *) LD="${LD-ld} -64" ;; ++ esac ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++ + AC_PROVIDE_IFELSE([AC_LIBTOOL_WIN32_DLL], + [*-*-cygwin* | *-*-mingw* | *-*-pw32*) + AC_CHECK_TOOL(DLLTOOL, dlltool, false) +@@ -1540,7 +636,7 @@ + # with a dollar sign (not a hyphen), so the echo should work correctly. + # The option is referenced via a variable to avoid confusing sed. + lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) +@@ -1550,8 +646,10 @@ + echo "$as_me:__oline__: \$? = $ac_status" >&AS_MESSAGE_LOG_FD + if (exit $ac_status) && test -s "$ac_outfile"; then + # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test ! -s conftest.err; then ++ # So say no if there are warnings other than the usual output. ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then + $2=yes + fi + fi +@@ -1577,11 +675,16 @@ + LDFLAGS="$LDFLAGS $3" + printf "$lt_simple_link_test_code" > conftest.$ac_ext + if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then +- # The compiler can only warn and ignore the option if not recognized ++ # The linker can only warn and ignore the option if not recognized + # So say no if there are warnings + if test -s conftest.err; then + # Append any errors to the config.log. + cat conftest.err 1>&AS_MESSAGE_LOG_FD ++ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ $2=yes ++ fi + else + $2=yes + fi +@@ -1640,17 +743,61 @@ + lt_cv_sys_max_cmd_len=8192; + ;; + +- *) +- # If test is not a shell built-in, we'll probably end up computing a +- # maximum length that is only half of the actual maximum length, but +- # we can't tell. +- while (test "X"`$CONFIG_SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ +- = "XX$teststring") >/dev/null 2>&1 && +- new_result=`expr "X$teststring" : ".*" 2>&1` && +- lt_cv_sys_max_cmd_len=$new_result && +- test $i != 17 # 1/2 MB should be enough +- do +- i=`expr $i + 1` ++ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) ++ # This has been around since 386BSD, at least. Likely further. ++ if test -x /sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` ++ elif test -x /usr/sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` ++ else ++ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs ++ fi ++ # And add a safety zone ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` ++ ;; ++ ++ interix*) ++ # We know the value 262144 and hardcode it with a safety zone (like BSD) ++ lt_cv_sys_max_cmd_len=196608 ++ ;; ++ ++ osf*) ++ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure ++ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not ++ # nice to cause kernel panics so lets avoid the loop below. ++ # First set a reasonable default. ++ lt_cv_sys_max_cmd_len=16384 ++ # ++ if test -x /sbin/sysconfig; then ++ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in ++ *1*) lt_cv_sys_max_cmd_len=-1 ;; ++ esac ++ fi ++ ;; ++ sco3.2v5*) ++ lt_cv_sys_max_cmd_len=102400 ++ ;; ++ sysv5* | sco5v6* | sysv4.2uw2*) ++ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` ++ if test -n "$kargmax"; then ++ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[[ ]]//'` ++ else ++ lt_cv_sys_max_cmd_len=32768 ++ fi ++ ;; ++ *) ++ # If test is not a shell built-in, we'll probably end up computing a ++ # maximum length that is only half of the actual maximum length, but ++ # we can't tell. ++ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} ++ while (test "X"`$SHELL [$]0 --fallback-echo "X$teststring" 2>/dev/null` \ ++ = "XX$teststring") >/dev/null 2>&1 && ++ new_result=`expr "X$teststring" : ".*" 2>&1` && ++ lt_cv_sys_max_cmd_len=$new_result && ++ test $i != 17 # 1/2 MB should be enough ++ do ++ i=`expr $i + 1` + teststring=$teststring$teststring + done + teststring= +@@ -1670,7 +817,7 @@ + + + # _LT_AC_CHECK_DLFCN +-# -------------------- ++# ------------------ + AC_DEFUN([_LT_AC_CHECK_DLFCN], + [AC_CHECK_HEADERS(dlfcn.h)dnl + ])# _LT_AC_CHECK_DLFCN +@@ -1678,7 +825,7 @@ + + # _LT_AC_TRY_DLOPEN_SELF (ACTION-IF-TRUE, ACTION-IF-TRUE-W-USCORE, + # ACTION-IF-FALSE, ACTION-IF-CROSS-COMPILING) +-# ------------------------------------------------------------------ ++# --------------------------------------------------------------------- + AC_DEFUN([_LT_AC_TRY_DLOPEN_SELF], + [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl + if test "$cross_compiling" = yes; then : +@@ -1744,17 +891,19 @@ + else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; + /* dlclose (self); */ + } ++ else ++ puts (dlerror ()); + + exit (status); + }] + EOF + if AC_TRY_EVAL(ac_link) && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) 2>/dev/null ++ (./conftest; exit; ) >&AS_MESSAGE_LOG_FD 2>/dev/null + lt_status=$? + case x$lt_status in + x$lt_dlno_uscore) $1 ;; + x$lt_dlneed_uscore) $2 ;; +- x$lt_unknown|x*) $3 ;; ++ x$lt_dlunknown|x*) $3 ;; + esac + else : + # compilation failed +@@ -1766,7 +915,7 @@ + + + # AC_LIBTOOL_DLOPEN_SELF +-# ------------------- ++# ---------------------- + AC_DEFUN([AC_LIBTOOL_DLOPEN_SELF], + [AC_REQUIRE([_LT_AC_CHECK_DLFCN])dnl + if test "x$enable_dlopen" != xyes; then +@@ -1837,7 +986,7 @@ + test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" + + save_LDFLAGS="$LDFLAGS" +- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" + + save_LIBS="$LIBS" + LIBS="$lt_cv_dlopen_libs $LIBS" +@@ -1850,7 +999,7 @@ + ]) + + if test "x$lt_cv_dlopen_self" = xyes; then +- LDFLAGS="$LDFLAGS $link_static_flag" ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" + AC_CACHE_CHECK([whether a statically linked program can dlopen itself], + lt_cv_dlopen_self_static, [dnl + _LT_AC_TRY_DLOPEN_SELF( +@@ -1898,7 +1047,7 @@ + # Note that $ac_compile itself does not contain backslashes and begins + # with a dollar sign (not a hyphen), so the echo should work correctly. + lt_compile=`echo "$ac_compile" | $SED \ +- -e 's:.*FLAGS}? :&$lt_compiler_flag :; t' \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ + -e 's: [[^ ]]*conftest\.: $lt_compiler_flag&:; t' \ + -e 's:$: $lt_compiler_flag:'` + (eval echo "\"\$as_me:__oline__: $lt_compile\"" >&AS_MESSAGE_LOG_FD) +@@ -1910,11 +1059,13 @@ + then + # The compiler can only warn and ignore the option if not recognized + # So say no if there are warnings +- if test ! -s out/conftest.err; then ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then + _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + fi + fi +- chmod u+w . ++ chmod u+w . 2>&AS_MESSAGE_LOG_FD + $rm conftest* + # SGI C++ compiler will create directory out/ii_files/ for + # template instantiation +@@ -1978,8 +1129,8 @@ + [AC_MSG_CHECKING([how to hardcode library paths into programs]) + _LT_AC_TAGVAR(hardcode_action, $1)= + if test -n "$_LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)" || \ +- test -n "$_LT_AC_TAGVAR(runpath_var $1)" || \ +- test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)"="Xyes" ; then ++ test -n "$_LT_AC_TAGVAR(runpath_var, $1)" || \ ++ test "X$_LT_AC_TAGVAR(hardcode_automatic, $1)" = "Xyes" ; then + + # We can hardcode non-existant directories. + if test "$_LT_AC_TAGVAR(hardcode_direct, $1)" != no && +@@ -2146,7 +1297,7 @@ + shlibpath_var=LIBRARY_PATH + ;; + +-bsdi4*) ++bsdi[[45]]*) + version_type=linux + need_version=no + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +@@ -2174,7 +1325,8 @@ + dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ +- $install_prog $dir/$dlname \$dldir/$dlname' ++ $install_prog $dir/$dlname \$dldir/$dlname~ ++ chmod a+x \$dldir/$dlname' + postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' +@@ -2204,7 +1356,7 @@ + ;; + pw32*) + # pw32 DLLs use 'pw' prefix rather than 'lib' +- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[[.]]/-/g'`${versuffix}${shared_ext}' + ;; + esac + ;; +@@ -2227,7 +1379,7 @@ + soname_spec='${libname}${release}${major}$shared_ext' + shlibpath_overrides_runpath=yes + shlibpath_var=DYLD_LIBRARY_PATH +- shrext_cmds='$(test .$module = .yes && echo .so || echo .dylib)' ++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' + # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. + if test "$GCC" = yes; then + sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` +@@ -2250,20 +1402,17 @@ + dynamic_linker=no + ;; + +-kfreebsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' +- ;; +- +-freebsd*) +- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` ++freebsd* | dragonfly*) ++ # DragonFly does not have aout. When/if they implement a new ++ # versioning mechanism, adjust this. ++ if test -x /usr/bin/objformat; then ++ objformat=`/usr/bin/objformat` ++ else ++ case $host_os in ++ freebsd[[123]]*) objformat=aout ;; ++ *) objformat=elf ;; ++ esac ++ fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) +@@ -2281,14 +1430,19 @@ + freebsd2*) + shlibpath_overrides_runpath=yes + ;; +- freebsd3.[01]* | freebsdelf3.[01]*) ++ freebsd3.[[01]]* | freebsdelf3.[[01]]*) + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes + ;; +- *) # from 3.2 on ++ freebsd3.[[2-9]]* | freebsdelf3.[[2-9]]* | \ ++ freebsd4.[[0-5]] | freebsdelf4.[[0-5]] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; ++ freebsd*) # from 4.6 on ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; + esac + ;; + +@@ -2308,7 +1462,7 @@ + version_type=sunos + need_lib_prefix=no + need_version=no +- case "$host_cpu" in ++ case $host_cpu in + ia64*) + shrext_cmds='.so' + hardcode_into_libs=yes +@@ -2348,6 +1502,18 @@ + postinstall_cmds='chmod 555 $lib' + ;; + ++interix3*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ + irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; +@@ -2391,7 +1557,7 @@ + ;; + + # This must be Linux ELF. +-linux*) ++linux* | k*bsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +@@ -2407,7 +1573,7 @@ + + # Append ld.so.conf contents to the search path + if test -f /etc/ld.so.conf; then +- lt_ld_extra=`$SED -e 's/[:,\t]/ /g;s/=[^=]*$//;s/=[^= ]* / /g' /etc/ld.so.conf | tr '\n' ' '` ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \[$]2)); skip = 1; } { if (!skip) print \[$]0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` + sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" + fi + +@@ -2432,18 +1598,6 @@ + dynamic_linker='NetBSD ld.elf_so' + ;; + +-knetbsd*-gnu) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' +- soname_spec='${libname}${release}${shared_ext}$major' +- shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='GNU ld.so' +- ;; +- + netbsd*) + version_type=sunos + need_lib_prefix=no +@@ -2481,8 +1635,13 @@ + + openbsd*) + version_type=sunos ++ sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no +- need_version=yes ++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. ++ case $host_os in ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; ++ esac + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + shlibpath_var=LD_LIBRARY_PATH +@@ -2520,13 +1679,6 @@ + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" + ;; + +-sco3.2v5*) +- version_type=osf +- soname_spec='${libname}${release}${shared_ext}$major' +- library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +- shlibpath_var=LD_LIBRARY_PATH +- ;; +- + solaris*) + version_type=linux + need_lib_prefix=no +@@ -2552,7 +1704,7 @@ + need_version=yes + ;; + +-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ++sysv4 | sysv4.3*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + soname_spec='${libname}${release}${shared_ext}$major' +@@ -2585,6 +1737,29 @@ + fi + ;; + ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ version_type=freebsd-elf ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ if test "$with_gnu_ld" = yes; then ++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' ++ shlibpath_overrides_runpath=no ++ else ++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' ++ shlibpath_overrides_runpath=yes ++ case $host_os in ++ sco3.2v5*) ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ++ ;; ++ esac ++ fi ++ sys_lib_dlsearch_path_spec='/usr/lib' ++ ;; ++ + uts4*) + version_type=linux + library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' +@@ -2598,6 +1773,11 @@ + esac + AC_MSG_RESULT([$dynamic_linker]) + test "$dynamic_linker" = no && can_build_shared=no ++ ++variables_saved_for_relink="PATH $shlibpath_var $runpath_var" ++if test "$GCC" = yes; then ++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" ++fi + ])# AC_LIBTOOL_SYS_DYNAMIC_LINKER + + +@@ -2622,6 +1802,9 @@ + AC_MSG_WARN([using `LTCC=$LTCC', extracted from `$ofile']) + fi + fi ++ if test -z "$LTCFLAGS"; then ++ eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" ++ fi + + # Extract list of available tagged configurations in $ofile. + # Note that this assumes the entire list is on one line. +@@ -2648,7 +1831,9 @@ + + case $tagname in + CXX) +- if test -n "$CXX" && test "X$CXX" != "Xno"; then ++ if test -n "$CXX" && ( test "X$CXX" != "Xno" && ++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || ++ (test "X$CXX" != "Xg++"))) ; then + AC_LIBTOOL_LANG_CXX_CONFIG + else + tagname="" +@@ -2710,7 +1895,7 @@ + + # AC_LIBTOOL_WIN32_DLL + # -------------------- +-# declare package support for building win32 dll's ++# declare package support for building win32 DLLs + AC_DEFUN([AC_LIBTOOL_WIN32_DLL], + [AC_BEFORE([$0], [AC_LIBTOOL_SETUP]) + ])# AC_LIBTOOL_WIN32_DLL +@@ -2748,7 +1933,7 @@ + + # AC_DISABLE_SHARED + # ----------------- +-#- set the default shared flag to --disable-shared ++# set the default shared flag to --disable-shared + AC_DEFUN([AC_DISABLE_SHARED], + [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + AC_ENABLE_SHARED(no) +@@ -2884,7 +2069,7 @@ + if test -n "$file_magic_test_file"; then + case $deplibs_check_method in + "file_magic "*) +- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` + MAGIC_CMD="$lt_cv_path_MAGIC_CMD" + if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | + $EGREP "$file_magic_regex" > /dev/null; then +@@ -2994,7 +2179,7 @@ + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, +- # but apparently some GNU ld's only accept -v. ++ # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. + case `"$lt_cv_path_LD" -v 2>&1 &1 /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. +- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[[3-9]]86 (compact )?demand paged shared library' ++ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[[3-9]]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; +@@ -3131,7 +2325,7 @@ + + hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file +- case "$host_cpu" in ++ case $host_cpu in + ia64*) + lt_cv_deplibs_check_method='file_magic (s[[0-9]][[0-9]][[0-9]]|ELF-[[0-9]][[0-9]]) shared object file - IA64' + lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so +@@ -3147,6 +2341,11 @@ + esac + ;; + ++interix3*) ++ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so|\.a)$' ++ ;; ++ + irix5* | irix6* | nonstopux*) + case $LD in + *-32|*"-32 ") libmagic=32-bit;; +@@ -3158,11 +2357,11 @@ + ;; + + # This must be Linux ELF. +-linux*) ++linux* | k*bsd*-gnu) + lt_cv_deplibs_check_method=pass_all + ;; + +-netbsd* | netbsdelf*-gnu | knetbsd*-gnu) ++netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + else +@@ -3181,12 +2380,10 @@ + ;; + + openbsd*) +- lt_cv_file_magic_cmd=/usr/bin/file +- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[LM]]SB shared object' ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|\.so|_pic\.a)$' + else +- lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' ++ lt_cv_deplibs_check_method='match_pattern /lib[[^/]]+(\.so\.[[0-9]]+\.[[0-9]]+|_pic\.a)$' + fi + ;; + +@@ -3194,15 +2391,11 @@ + lt_cv_deplibs_check_method=pass_all + ;; + +-sco3.2v5*) +- lt_cv_deplibs_check_method=pass_all +- ;; +- + solaris*) + lt_cv_deplibs_check_method=pass_all + ;; + +-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ++sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [[0-9]][[0-9]]*-bit [[ML]]SB (shared object|dynamic lib) M[[0-9]][[0-9]]* Version [[0-9]]' +@@ -3223,10 +2416,13 @@ + siemens) + lt_cv_deplibs_check_method=pass_all + ;; ++ pc) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + esac + ;; + +-sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7* | sysv4*uw2*) ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) + lt_cv_deplibs_check_method=pass_all + ;; + esac +@@ -3246,36 +2442,43 @@ + # Let the user override the test. + lt_cv_path_NM="$NM" + else +- lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do +- IFS="$lt_save_ifs" +- test -z "$ac_dir" && ac_dir=. +- tmp_nm="$ac_dir/${ac_tool_prefix}nm" +- if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then +- # Check to see if the nm accepts a BSD-compat flag. +- # Adding the `sed 1q' prevents false positives on HP-UX, which says: +- # nm: unknown option "B" ignored +- # Tru64's nm complains that /dev/null is an invalid object file +- case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in +- */dev/null* | *'Invalid file or object type'*) +- lt_cv_path_NM="$tmp_nm -B" +- break +- ;; +- *) +- case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in +- */dev/null*) +- lt_cv_path_NM="$tmp_nm -p" ++ lt_nm_to_check="${ac_tool_prefix}nm" ++ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then ++ lt_nm_to_check="$lt_nm_to_check nm" ++ fi ++ for lt_tmp_nm in $lt_nm_to_check; do ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ tmp_nm="$ac_dir/$lt_tmp_nm" ++ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then ++ # Check to see if the nm accepts a BSD-compat flag. ++ # Adding the `sed 1q' prevents false positives on HP-UX, which says: ++ # nm: unknown option "B" ignored ++ # Tru64's nm complains that /dev/null is an invalid object file ++ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in ++ */dev/null* | *'Invalid file or object type'*) ++ lt_cv_path_NM="$tmp_nm -B" + break + ;; + *) +- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but +- continue # so that we can try to find one that supports BSD flags ++ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in ++ */dev/null*) ++ lt_cv_path_NM="$tmp_nm -p" ++ break ++ ;; ++ *) ++ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but ++ continue # so that we can try to find one that supports BSD flags ++ ;; ++ esac + ;; + esac +- esac +- fi ++ fi ++ done ++ IFS="$lt_save_ifs" + done +- IFS="$lt_save_ifs" + test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm + fi]) + NM="$lt_cv_path_NM" +@@ -3307,13 +2510,13 @@ + # ----------------------------------- + # sets LIBLTDL to the link flags for the libltdl convenience library and + # LTDLINCL to the include flags for the libltdl header and adds +-# --enable-ltdl-convenience to the configure arguments. Note that LIBLTDL +-# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If +-# DIRECTORY is not provided, it is assumed to be `libltdl'. LIBLTDL will +-# be prefixed with '${top_builddir}/' and LTDLINCL will be prefixed with +-# '${top_srcdir}/' (note the single quotes!). If your package is not +-# flat and you're not using automake, define top_builddir and +-# top_srcdir appropriately in the Makefiles. ++# --enable-ltdl-convenience to the configure arguments. Note that ++# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, ++# it is assumed to be `libltdl'. LIBLTDL will be prefixed with ++# '${top_builddir}/' and LTDLINCL will be prefixed with '${top_srcdir}/' ++# (note the single quotes!). If your package is not flat and you're not ++# using automake, define top_builddir and top_srcdir appropriately in ++# the Makefiles. + AC_DEFUN([AC_LIBLTDL_CONVENIENCE], + [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl + case $enable_ltdl_convenience in +@@ -3332,13 +2535,13 @@ + # ----------------------------------- + # sets LIBLTDL to the link flags for the libltdl installable library and + # LTDLINCL to the include flags for the libltdl header and adds +-# --enable-ltdl-install to the configure arguments. Note that LIBLTDL +-# and LTDLINCL are not AC_SUBSTed, nor is AC_CONFIG_SUBDIRS called. If +-# DIRECTORY is not provided and an installed libltdl is not found, it is +-# assumed to be `libltdl'. LIBLTDL will be prefixed with '${top_builddir}/' +-# and LTDLINCL will be prefixed with '${top_srcdir}/' (note the single +-# quotes!). If your package is not flat and you're not using automake, +-# define top_builddir and top_srcdir appropriately in the Makefiles. ++# --enable-ltdl-install to the configure arguments. Note that ++# AC_CONFIG_SUBDIRS is not called here. If DIRECTORY is not provided, ++# and an installed libltdl is not found, it is assumed to be `libltdl'. ++# LIBLTDL will be prefixed with '${top_builddir}/'# and LTDLINCL with ++# '${top_srcdir}/' (note the single quotes!). If your package is not ++# flat and you're not using automake, define top_builddir and top_srcdir ++# appropriately in the Makefiles. + # In the future, this macro may have to be called after AC_PROG_LIBTOOL. + AC_DEFUN([AC_LIBLTDL_INSTALLABLE], + [AC_BEFORE([$0],[AC_LIBTOOL_SETUP])dnl +@@ -3376,10 +2579,21 @@ + # --------------- + AC_DEFUN([_LT_AC_LANG_CXX], + [AC_REQUIRE([AC_PROG_CXX]) +-AC_REQUIRE([AC_PROG_CXXCPP]) ++AC_REQUIRE([_LT_AC_PROG_CXXCPP]) + _LT_AC_SHELL_INIT([tagnames=${tagnames+${tagnames},}CXX]) + ])# _LT_AC_LANG_CXX + ++# _LT_AC_PROG_CXXCPP ++# ------------------ ++AC_DEFUN([_LT_AC_PROG_CXXCPP], ++[ ++AC_REQUIRE([AC_PROG_CXX]) ++if test -n "$CXX" && ( test "X$CXX" != "Xno" && ++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || ++ (test "X$CXX" != "Xg++"))) ; then ++ AC_PROG_CXXCPP ++fi ++])# _LT_AC_PROG_CXXCPP + + # AC_LIBTOOL_F77 + # -------------- +@@ -3419,7 +2633,7 @@ + + + # AC_LIBTOOL_RC +-# -------------- ++# ------------- + # enable support for Windows resource files + AC_DEFUN([AC_LIBTOOL_RC], + [AC_REQUIRE([LT_AC_PROG_RC]) +@@ -3452,36 +2666,9 @@ + + _LT_AC_SYS_COMPILER + +-# +-# Check for any special shared library compilation flags. +-# +-_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)= +-if test "$GCC" = no; then +- case $host_os in +- sco3.2v5*) +- _LT_AC_TAGVAR(lt_prog_cc_shlib, $1)='-belf' +- ;; +- esac +-fi +-if test -n "$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)"; then +- AC_MSG_WARN([`$CC' requires `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to build shared libraries]) +- if echo "$old_CC $old_CFLAGS " | grep "[[ ]]$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)[[ ]]" >/dev/null; then : +- else +- AC_MSG_WARN([add `$_LT_AC_TAGVAR(lt_prog_cc_shlib, $1)' to the CC or CFLAGS env variable and reconfigure]) +- _LT_AC_TAGVAR(lt_cv_prog_cc_can_build_shared, $1)=no +- fi +-fi +- +- +-# +-# Check to make sure the static flag actually works. +-# +-AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $_LT_AC_TAGVAR(lt_prog_compiler_static, $1) works], +- _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), +- $_LT_AC_TAGVAR(lt_prog_compiler_static, $1), +- [], +- [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) +- ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE + + AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) + AC_LIBTOOL_PROG_COMPILER_PIC($1) +@@ -3491,9 +2678,9 @@ + AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) + AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) + AC_LIBTOOL_SYS_LIB_STRIP +-AC_LIBTOOL_DLOPEN_SELF($1) ++AC_LIBTOOL_DLOPEN_SELF + +-# Report which librarie types wil actually be built ++# Report which library types will actually be built + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) + +@@ -3502,7 +2689,7 @@ + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. +-case "$host_os" in ++case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then +@@ -3515,43 +2702,6 @@ + if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then + test "$enable_shared" = yes && enable_static=no + fi +- ;; +- darwin* | rhapsody*) +- if test "$GCC" = yes; then +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- case "$host_os" in +- rhapsody* | darwin1.[[012]]) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[[012]]) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' +- ;; +- 10.*) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup' +- ;; +- esac +- fi +- ;; +- esac +- output_verbose_link_cmd='echo' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring' +- _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs$compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) +@@ -3577,7 +2727,7 @@ + AC_DEFUN([_LT_AC_LANG_CXX_CONFIG], + [AC_LANG_PUSH(C++) + AC_REQUIRE([AC_PROG_CXX]) +-AC_REQUIRE([AC_PROG_CXXCPP]) ++AC_REQUIRE([_LT_AC_PROG_CXXCPP]) + + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(allow_undefined_flag, $1)= +@@ -3589,6 +2739,7 @@ + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)= + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + _LT_AC_TAGVAR(hardcode_minus_L, $1)=no ++_LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported + _LT_AC_TAGVAR(hardcode_automatic, $1)=no + _LT_AC_TAGVAR(module_cmds, $1)= + _LT_AC_TAGVAR(module_expsym_cmds, $1)= +@@ -3606,7 +2757,7 @@ + _LT_AC_TAGVAR(compiler_lib_search_path, $1)= + + # Source file extension for C++ test sources. +-ac_ext=cc ++ac_ext=cpp + + # Object file extension for compiled C++ test sources. + objext=o +@@ -3616,11 +2767,15 @@ + lt_simple_compile_test_code="int some_variable = 0;\n" + + # Code to be used in simple link tests +-lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n' ++lt_simple_link_test_code='int main(int, char *[[]]) { return(0); }\n' + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_AC_SYS_COMPILER + ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE ++ + # Allow CC to be a program name with arguments. + lt_save_CC=$CC + lt_save_LD=$LD +@@ -3631,18 +2786,18 @@ + if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then + lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx + else +- unset lt_cv_prog_gnu_ld ++ $as_unset lt_cv_prog_gnu_ld + fi + if test -n "${lt_cv_path_LDCXX+set}"; then + lt_cv_path_LD=$lt_cv_path_LDCXX + else +- unset lt_cv_path_LD ++ $as_unset lt_cv_path_LD + fi + test -z "${LDCXX+set}" || LD=$LDCXX + CC=${CXX-"c++"} + compiler=$CC + _LT_AC_TAGVAR(compiler, $1)=$CC +-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` ++_LT_CC_BASENAME([$compiler]) + + # We don't want -fno-exception wen compiling C++ code, so set the + # no_builtin_flag separately +@@ -3731,6 +2886,7 @@ + ;; + esac + done ++ ;; + esac + + exp_sym_flag='-bexport' +@@ -3749,7 +2905,7 @@ + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GXX" = yes; then +- case $host_os in aix4.[012]|aix4.[012].*) ++ case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` +@@ -3768,8 +2924,12 @@ + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + fi ++ ;; + esac + shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi + else + # not using gcc + if test "$host_cpu" = ia64; then +@@ -3796,12 +2956,12 @@ + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" + +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX +@@ -3810,16 +2970,26 @@ + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' +- # -bexpall does not export symbols beginning with underscore (_) +- _LT_AC_TAGVAR(always_export_symbols, $1)=yes + # Exported symbols can be pulled into shared objects from archives +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes +- # This is similar to how AIX traditionally builds it's shared libraries. +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ # This is similar to how AIX traditionally builds its shared libraries. ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; ++ ++ beos*) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ + chorus*) + case $cc_basename in + *) +@@ -3838,7 +3008,7 @@ + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +@@ -3847,70 +3017,81 @@ + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ +- $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' ++ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else + _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; ++ darwin* | rhapsody*) ++ case $host_os in ++ rhapsody* | darwin1.[[012]]) ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' ++ ;; ++ *) # Darwin 1.3 on ++ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ else ++ case ${MACOSX_DEPLOYMENT_TARGET} in ++ 10.[[012]]) ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ ;; ++ 10.*) ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' ++ ;; ++ esac ++ fi ++ ;; ++ esac ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_AC_TAGVAR(hardcode_direct, $1)=no ++ _LT_AC_TAGVAR(hardcode_automatic, $1)=yes ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + +- darwin* | rhapsody*) +- if test "$GXX" = yes; then +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- case "$host_os" in +- rhapsody* | darwin1.[[012]]) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' ++ if test "$GXX" = yes ; then ++ lt_int_apple_cc_single_mod=no ++ output_verbose_link_cmd='echo' ++ if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then ++ lt_int_apple_cc_single_mod=yes ++ fi ++ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' + else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[[012]]) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' +- ;; +- 10.*) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup' +- ;; +- esac ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' ++ fi ++ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ else ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ fi ++ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ else ++ case $cc_basename in ++ xlc*) ++ output_verbose_link_cmd='echo' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' ++ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ ;; ++ *) ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac + fi +- ;; +- esac +- lt_int_apple_cc_single_mod=no +- output_verbose_link_cmd='echo' +- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then +- lt_int_apple_cc_single_mod=yes +- fi +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- fi +- _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- else +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- fi +- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_automatic, $1)=yes +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' +- _LT_AC_TAGVAR(link_all_deplibs, $1)=yes +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; ++ ;; + + dgux*) + case $cc_basename in +- ec++) ++ ec++*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; +- ghcx) ++ ghcx*) + # Green Hills C++ Compiler + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no +@@ -3921,14 +3102,14 @@ + ;; + esac + ;; +- freebsd[12]*) ++ freebsd[[12]]*) + # C++ shared libraries reported to be fairly broken before switch to ELF + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + freebsd-elf*) + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + ;; +- freebsd* | kfreebsd*-gnu) ++ freebsd* | dragonfly*) + # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF + # conventions + _LT_AC_TAGVAR(ld_shlibs, $1)=yes +@@ -3945,11 +3126,11 @@ + # location of the library. + + case $cc_basename in +- CC) ++ CC*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; +- aCC) ++ aCC*) + _LT_AC_TAGVAR(archive_cmds, $1)='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' + # Commands to make compiler produce verbose output that lists + # what "hidden" libraries, object files and flags are used when +@@ -3959,7 +3140,7 @@ + # explicitly linking system object files so we need to strip them + # from the output so that they don't get included in the library + # dependencies. +- output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[[-]]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' + ;; + *) + if test "$GXX" = yes; then +@@ -3973,33 +3154,22 @@ + ;; + hpux10*|hpux11*) + if test $with_gnu_ld = no; then +- case "$host_cpu" in +- hppa*64*) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- ;; +- ia64*) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + ;; + *) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + esac + fi +- case "$host_cpu" in +- hppa*64*) +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; +- ia64*) ++ case $host_cpu in ++ hppa*64*|ia64*) + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes # Not in the search PATH, +- # but as the default +- # location of the library. + ;; + *) + _LT_AC_TAGVAR(hardcode_direct, $1)=yes +@@ -4010,14 +3180,17 @@ + esac + + case $cc_basename in +- CC) ++ CC*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; +- aCC) +- case "$host_cpu" in +- hppa*64*|ia64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' ++ aCC*) ++ case $host_cpu in ++ hppa*64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ ia64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +@@ -4036,9 +3209,12 @@ + *) + if test "$GXX" = yes; then + if test $with_gnu_ld = no; then +- case "$host_cpu" in +- ia64*|hppa*64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $linker_flags $libobjs $deplibs' ++ case $host_cpu in ++ hppa*64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ ia64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' +@@ -4052,11 +3228,25 @@ + ;; + esac + ;; ++ interix3*) ++ _LT_AC_TAGVAR(hardcode_direct, $1)=no ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; + irix5* | irix6*) + case $cc_basename in +- CC) ++ CC*) + # SGI C++ +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + + # Archives containing C++ object files must be created using + # "CC -ar", where "CC" is the IRIX C++ compiler. This is +@@ -4067,7 +3257,7 @@ + *) + if test "$GXX" = yes; then + if test "$with_gnu_ld" = no; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + else + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' + fi +@@ -4078,9 +3268,9 @@ + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; +- linux*) ++ linux* | k*bsd*-gnu) + case $cc_basename in +- KCC) ++ KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file +@@ -4105,17 +3295,41 @@ + # "CC -Bstatic", where "CC" is the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + ;; +- icpc) ++ icpc*) + # Intel C++ + with_gnu_ld=yes ++ # version 8.0 and above of icpc choke on multiply defined symbols ++ # if we add $predep_objects and $postdep_objects, however 7.1 and ++ # earlier do not add the objects themselves. ++ case `$CC -V 2>&1` in ++ *"Version 7."*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ;; ++ *) # Version 8.0 or newer ++ tmp_idyn= ++ case $host_cpu in ++ ia64*) tmp_idyn=' -i_dynamic';; ++ esac ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ;; ++ esac + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' + _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive$convenience ${wl}--no-whole-archive' + ;; +- cxx) ++ pgCC*) ++ # Portland Group C++ compiler ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ++ ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ ;; ++ cxx*) + # Compaq C++ + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' +@@ -4146,7 +3360,7 @@ + ;; + mvs*) + case $cc_basename in +- cxx) ++ cxx*) + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; +@@ -4156,7 +3370,7 @@ + ;; + esac + ;; +- netbsd* | netbsdelf*-gnu | knetbsd*-gnu) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' + wlarc= +@@ -4167,15 +3381,31 @@ + # Workaround some broken pre-1.5 toolchains + output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' + ;; +- osf3*) +- case $cc_basename in +- KCC) +- # Kuck and Associates, Inc. (KAI) C++ Compiler +- +- # KCC will only create a shared library if the output file +- # ends with ".so" (or ".sl" for HP-UX), so rename the library +- # to its proper name (with version) after linking. +- _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' ++ openbsd2*) ++ # C++ shared libraries are fairly broken ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ openbsd*) ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ fi ++ output_verbose_link_cmd='echo' ++ ;; ++ osf3*) ++ case $cc_basename in ++ KCC*) ++ # Kuck and Associates, Inc. (KAI) C++ Compiler ++ ++ # KCC will only create a shared library if the output file ++ # ends with ".so" (or ".sl" for HP-UX), so rename the library ++ # to its proper name (with version) after linking. ++ _LT_AC_TAGVAR(archive_cmds, $1)='tempext=`echo $shared_ext | $SED -e '\''s/\([[^()0-9A-Za-z{}]]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +@@ -4185,14 +3415,14 @@ + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -Bstatic -o $oldlib $oldobjs' + + ;; +- RCC) ++ RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; +- cxx) ++ cxx*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +@@ -4210,7 +3440,7 @@ + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +@@ -4229,7 +3459,7 @@ + ;; + osf4* | osf5*) + case $cc_basename in +- KCC) ++ KCC*) + # Kuck and Associates, Inc. (KAI) C++ Compiler + + # KCC will only create a shared library if the output file +@@ -4244,17 +3474,17 @@ + # the KAI C++ compiler. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -o $oldlib $oldobjs' + ;; +- RCC) ++ RCC*) + # Rational C++ 2.4.1 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; +- cxx) ++ cxx*) + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ + echo "-hidden">> $lib.exp~ +- $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry $objdir/so_locations -o $lib~ ++ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ + $rm $lib.exp' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' +@@ -4273,7 +3503,7 @@ + *) + if test "$GXX" = yes && test "$with_gnu_ld" = no; then + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-expect_unresolved ${wl}\*' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${objdir}/so_locations -o $lib' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath ${wl}$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +@@ -4294,27 +3524,14 @@ + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; +- sco*) +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- case $cc_basename in +- CC) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- *) +- # FIXME: insert proper C++ library support +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- ;; +- esac +- ;; + sunos4*) + case $cc_basename in +- CC) ++ CC*) + # Sun C++ 4.x + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; +- lcc) ++ lcc*) + # Lucid + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no +@@ -4327,36 +3544,33 @@ + ;; + solaris*) + case $cc_basename in +- CC) ++ CC*) + # Sun C++ 4.2, 5.x and Centerline C++ ++ _LT_AC_TAGVAR(archive_cmds_need_lc,$1)=yes + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -zdefs' +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -nolib -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $CC -G${allow_undefined_flag} -nolib ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' ++ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' + + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in +- solaris2.[0-5] | solaris2.[0-5].*) ;; ++ solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; + *) + # The C++ compiler is used as linker so we must use $wl + # flag to pass the commands to the underlying system +- # linker. ++ # linker. We must also pass each convience library through ++ # to the system linker between allextract/defaultextract. ++ # The C++ compiler will combine linker options so we ++ # cannot just pass the convience library names through ++ # without $wl. + # Supported since Solaris 2.6 (maybe 2.5.1?) +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract$convenience ${wl}-z ${wl}defaultextract' ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' + ;; + esac + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + +- # Commands to make compiler produce verbose output that lists +- # what "hidden" libraries, object files and flags are used when +- # linking a shared library. +- # +- # There doesn't appear to be a way to prevent this compiler from +- # explicitly linking system object files so we need to strip them +- # from the output so that they don't get included in the library +- # dependencies. +- output_verbose_link_cmd='templist=`$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep "\-[[LR]]"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ output_verbose_link_cmd='echo' + + # Archives containing C++ object files must be created using + # "CC -xar", where "CC" is the Sun C++ compiler. This is +@@ -4364,7 +3578,7 @@ + # in the archive. + _LT_AC_TAGVAR(old_archive_cmds, $1)='$CC -xar -o $oldlib $oldobjs' + ;; +- gcx) ++ gcx*) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' + +@@ -4402,12 +3616,63 @@ + ;; + esac + ;; +- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7* | sco3.2v5.0.[[024]]*) ++ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ runpath_var='LD_RUN_PATH' ++ ++ case $cc_basename in ++ CC*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ ;; ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ # For security reasons, it is highly recommended that you always ++ # use absolute paths for naming shared libraries, and exclude the ++ # DT_RUNPATH tag from executables and libraries. But doing so ++ # requires that you compile everything twice, which is a pain. ++ # So that behaviour is only enabled if SCOABSPATH is set to a ++ # non-empty value in the environment. Most likely only useful for ++ # creating official distributions of packages. ++ # This is a hack until libtool officially supports absolute path ++ # names for shared libraries. ++ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' ++ ++ case $cc_basename in ++ CC*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac + ;; + tandem*) + case $cc_basename in +- NCC) ++ NCC*) + # NonStop-UX NCC 3.20 + # FIXME: insert proper C++ library support + _LT_AC_TAGVAR(ld_shlibs, $1)=no +@@ -4440,8 +3705,6 @@ + AC_LIBTOOL_PROG_LD_SHLIBS($1) + AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) + AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +-AC_LIBTOOL_SYS_LIB_STRIP +-AC_LIBTOOL_DLOPEN_SELF($1) + + AC_LIBTOOL_CONFIG($1) + +@@ -4459,7 +3722,7 @@ + ])# AC_LIBTOOL_LANG_CXX_CONFIG + + # AC_LIBTOOL_POSTDEP_PREDEP([TAGNAME]) +-# ------------------------ ++# ------------------------------------ + # Figure out "hidden" library dependencies from verbose + # compiler output when linking a shared library. + # Parse the compiler output and extract the necessary +@@ -4513,7 +3776,7 @@ + # The `*' in the case matches for architectures that use `case' in + # $output_verbose_cmd can trigger glob expansion during the loop + # eval without this substitution. +- output_verbose_link_cmd="`$echo \"X$output_verbose_link_cmd\" | $Xsed -e \"$no_glob_subst\"`" ++ output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"` + + for p in `eval $output_verbose_link_cmd`; do + case $p in +@@ -4589,13 +3852,37 @@ + + $rm -f confest.$objext + ++# PORTME: override above test on systems where it is broken ++ifelse([$1],[CXX], ++[case $host_os in ++interix3*) ++ # Interix 3.5 installs completely hosed .la files for C++, so rather than ++ # hack all around it, let's just trust "g++" to DTRT. ++ _LT_AC_TAGVAR(predep_objects,$1)= ++ _LT_AC_TAGVAR(postdep_objects,$1)= ++ _LT_AC_TAGVAR(postdeps,$1)= ++ ;; ++ ++solaris*) ++ case $cc_basename in ++ CC*) ++ # Adding this requires a known-good setup of shared libraries for ++ # Sun compiler versions before 5.6, else PIC objects from an old ++ # archive will be linked into the output, leading to subtle bugs. ++ _LT_AC_TAGVAR(postdeps,$1)='-lCstd -lCrun' ++ ;; ++ esac ++ ;; ++esac ++]) ++ + case " $_LT_AC_TAGVAR(postdeps, $1) " in + *" -lc "*) _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no ;; + esac + ])# AC_LIBTOOL_POSTDEP_PREDEP + + # AC_LIBTOOL_LANG_F77_CONFIG +-# ------------------------ ++# -------------------------- + # Ensure that the configuration vars for the C compiler are + # suitably defined. Those variables are subsequently used by + # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +@@ -4639,12 +3926,16 @@ + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_AC_SYS_COMPILER + ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE ++ + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + CC=${F77-"f77"} + compiler=$CC + _LT_AC_TAGVAR(compiler, $1)=$CC +-cc_basename=`$echo X"$compiler" | $Xsed -e 's%^.*/%%'` ++_LT_CC_BASENAME([$compiler]) + + AC_MSG_CHECKING([if libtool supports shared libraries]) + AC_MSG_RESULT([$can_build_shared]) +@@ -4654,7 +3945,7 @@ + + # On AIX, shared libraries and static libraries use the same namespace, and + # are all built from PIC. +-case "$host_os" in ++case $host_os in + aix3*) + test "$enable_shared" = yes && enable_static=no + if test -n "$RANLIB"; then +@@ -4663,7 +3954,9 @@ + fi + ;; + aix4* | aix5*) +- test "$enable_shared" = yes && enable_static=no ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi + ;; + esac + AC_MSG_RESULT([$enable_shared]) +@@ -4673,8 +3966,6 @@ + test "$enable_shared" = yes || enable_static=yes + AC_MSG_RESULT([$enable_static]) + +-test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no +- + _LT_AC_TAGVAR(GCC, $1)="$G77" + _LT_AC_TAGVAR(LD, $1)="$LD" + +@@ -4684,8 +3975,6 @@ + AC_LIBTOOL_PROG_LD_SHLIBS($1) + AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) + AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +-AC_LIBTOOL_SYS_LIB_STRIP +- + + AC_LIBTOOL_CONFIG($1) + +@@ -4714,20 +4003,27 @@ + lt_simple_compile_test_code="class foo {}\n" + + # Code to be used in simple link tests +-lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n' ++lt_simple_link_test_code='public class conftest { public static void main(String[[]] argv) {}; }\n' + + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_AC_SYS_COMPILER + ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE ++ + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + CC=${GCJ-"gcj"} + compiler=$CC + _LT_AC_TAGVAR(compiler, $1)=$CC ++_LT_CC_BASENAME([$compiler]) + + # GCJ did not exist at the time GCC didn't implicitly link libc in. + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + ++_LT_AC_TAGVAR(old_archive_cmds, $1)=$old_archive_cmds ++ + AC_LIBTOOL_PROG_COMPILER_NO_RTTI($1) + AC_LIBTOOL_PROG_COMPILER_PIC($1) + AC_LIBTOOL_PROG_CC_C_O($1) +@@ -4735,8 +4031,6 @@ + AC_LIBTOOL_PROG_LD_SHLIBS($1) + AC_LIBTOOL_SYS_DYNAMIC_LINKER($1) + AC_LIBTOOL_PROG_LD_HARDCODE_LIBPATH($1) +-AC_LIBTOOL_SYS_LIB_STRIP +-AC_LIBTOOL_DLOPEN_SELF($1) + + AC_LIBTOOL_CONFIG($1) + +@@ -4746,7 +4040,7 @@ + + + # AC_LIBTOOL_LANG_RC_CONFIG +-# -------------------------- ++# ------------------------- + # Ensure that the configuration vars for the Windows resource compiler are + # suitably defined. Those variables are subsequently used by + # AC_LIBTOOL_CONFIG to write the compiler configuration to `libtool'. +@@ -4770,11 +4064,16 @@ + # ltmain only uses $CC for tagged configurations so make sure $CC is set. + _LT_AC_SYS_COMPILER + ++# save warnings/boilerplate of simple test code ++_LT_COMPILER_BOILERPLATE ++_LT_LINKER_BOILERPLATE ++ + # Allow CC to be a program name with arguments. + lt_save_CC="$CC" + CC=${RC-"windres"} + compiler=$CC + _LT_AC_TAGVAR(compiler, $1)=$CC ++_LT_CC_BASENAME([$compiler]) + _LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1)=yes + + AC_LIBTOOL_CONFIG($1) +@@ -4804,7 +4103,7 @@ + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC NM \ ++ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ + SED SHELL STRIP \ + libname_spec library_names_spec soname_spec extract_expsyms_cmds \ + old_striplib striplib file_magic_cmd finish_cmds finish_eval \ +@@ -4910,7 +4209,7 @@ + # + # You should have received a copy of the GNU General Public License + # along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + # + # As a special exception to the GNU General Public License, if you + # distribute this file as part of a program that contains a +@@ -4921,11 +4220,11 @@ + SED=$lt_SED + + # Sed that helps us avoid accidentally triggering echo(1) options like -n. +-Xsed="$SED -e s/^X//" ++Xsed="$SED -e 1s/^X//" + + # The HP-UX ksh and POSIX shell print the target directory to stdout + # if CDPATH is set. +-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + # The names of the tagged configurations supported by this script. + available_tags= +@@ -4956,6 +4255,12 @@ + # The host system. + host_alias=$host_alias + host=$host ++host_os=$host_os ++ ++# The build system. ++build_alias=$build_alias ++build=$build ++build_os=$build_os + + # An echo program that does not interpret backslashes. + echo=$lt_echo +@@ -4967,6 +4272,9 @@ + # A C compiler. + LTCC=$lt_LTCC + ++# LTCC compiler flags. ++LTCFLAGS=$lt_LTCFLAGS ++ + # A language-specific compiler. + CC=$lt_[]_LT_AC_TAGVAR(compiler, $1) + +@@ -5032,7 +4340,7 @@ + # Does compiler simultaneously support -c and -o options? + compiler_c_o=$lt_[]_LT_AC_TAGVAR(lt_cv_prog_compiler_c_o, $1) + +-# Must we lock files when doing compilation ? ++# Must we lock files when doing compilation? + need_locks=$lt_need_locks + + # Do we need the lib prefix for modules? +@@ -5306,9 +4614,6 @@ + # Regexp to match symbols that can be accessed directly from C. + sympat='\([[_A-Za-z]][[_A-Za-z0-9]]*\)' + +-# Transform the above into a raw symbol and a C symbol. +-symxfrm='\1 \2\3 \3' +- + # Transform an extracted symbol line into a proper C declaration + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" + +@@ -5330,15 +4635,31 @@ + lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" + lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + ;; ++linux* | k*bsd*-gnu) ++ if test "$host_cpu" = ia64; then ++ symcode='[[ABCDGIRSTW]]' ++ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" ++ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([[^ ]]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([[^ ]]*\) \([[^ ]]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ++ fi ++ ;; + irix* | nonstopux*) + symcode='[[BCDEGRST]]' + ;; + osf*) + symcode='[[BCDEGQRST]]' + ;; +-solaris* | sysv5*) ++solaris*) + symcode='[[BDRT]]' + ;; ++sco3.2v5*) ++ symcode='[[DT]]' ++ ;; ++sysv4.2uw2*) ++ symcode='[[DT]]' ++ ;; ++sysv5* | sco5v6* | unixware* | OpenUNIX*) ++ symcode='[[ABDT]]' ++ ;; + sysv4) + symcode='[[DFNSTU]]' + ;; +@@ -5361,8 +4682,11 @@ + # Try without a prefix undercore, then with it. + for ac_symprfx in "" "_"; do + ++ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. ++ symxfrm="\\1 $ac_symprfx\\2 \\2" ++ + # Write the raw and C identifiers. +- lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" ++ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[[ ]]\($symcode$symcode*\)[[ ]][[ ]]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" + + # Check to see that the pipe works correctly. + pipe_works=no +@@ -5518,6 +4842,10 @@ + # DJGPP does not support shared libraries at all + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + ;; ++ interix3*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; + sysv4*MP*) + if test -d /usr/nec; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)=-Kconform_pic +@@ -5526,7 +4854,7 @@ + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. +- case "$host_cpu" in ++ case $host_cpu in + hppa*64*|ia64*) + ;; + *) +@@ -5551,18 +4879,28 @@ + ;; + chorus*) + case $cc_basename in +- cxch68) ++ cxch68*) + # Green Hills C++ Compiler + # _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" + ;; + esac + ;; ++ darwin*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ case $cc_basename in ++ xlc*) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ ;; ++ esac ++ ;; + dgux*) + case $cc_basename in +- ec++) ++ ec++*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; +- ghcx) ++ ghcx*) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; +@@ -5570,22 +4908,22 @@ + ;; + esac + ;; +- freebsd* | kfreebsd*-gnu) ++ freebsd* | dragonfly*) + # FreeBSD uses GNU C++ + ;; + hpux9* | hpux10* | hpux11*) + case $cc_basename in +- CC) ++ CC*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' + if test "$host_cpu" != ia64; then + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='+Z' + fi + ;; +- aCC) ++ aCC*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)="${ac_cv_prog_cc_wl}-a ${ac_cv_prog_cc_wl}archive" +- case "$host_cpu" in ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='${wl}-a ${wl}archive' ++ case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; +@@ -5598,9 +4936,13 @@ + ;; + esac + ;; ++ interix*) ++ # This is c89, which is MS Visual C++ (no shared libs) ++ # Anyone wants to do a port? ++ ;; + irix5* | irix6* | nonstopux*) + case $cc_basename in +- CC) ++ CC*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + # CC pic flag -KPIC is the default. +@@ -5609,20 +4951,26 @@ + ;; + esac + ;; +- linux*) ++ linux* | k*bsd*-gnu) + case $cc_basename in +- KCC) ++ KCC*) + # KAI C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' + ;; +- icpc) ++ icpc* | ecpc*) + # Intel C++ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; +- cxx) ++ pgCC*) ++ # Portland Group C++ compiler. ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ cxx*) + # Compaq C++ + # Make sure the PIC flag is empty. It appears that all Alpha + # Linux and Compaq Tru64 Unix objects are PIC. +@@ -5639,25 +4987,25 @@ + ;; + mvs*) + case $cc_basename in +- cxx) ++ cxx*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-W c,exportall' + ;; + *) + ;; + esac + ;; +- netbsd* | netbsdelf*-gnu | knetbsd*-gnu) ++ netbsd* | netbsdelf*-gnu) + ;; + osf3* | osf4* | osf5*) + case $cc_basename in +- KCC) ++ KCC*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='--backend -Wl,' + ;; +- RCC) ++ RCC*) + # Rational C++ 2.4.1 + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; +- cxx) ++ cxx*) + # Digital/Compaq C++ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # Make sure the PIC flag is empty. It appears that all Alpha +@@ -5671,24 +5019,15 @@ + ;; + psos*) + ;; +- sco*) +- case $cc_basename in +- CC) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fPIC' +- ;; +- *) +- ;; +- esac +- ;; + solaris*) + case $cc_basename in +- CC) ++ CC*) + # Sun C++ 4.2, 5.x and Centerline C++ + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ' + ;; +- gcx) ++ gcx*) + # Green Hills C++ Compiler + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-PIC' + ;; +@@ -5698,12 +5037,12 @@ + ;; + sunos4*) + case $cc_basename in +- CC) ++ CC*) + # Sun C++ 4.x + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; +- lcc) ++ lcc*) + # Lucid + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + ;; +@@ -5713,7 +5052,7 @@ + ;; + tandem*) + case $cc_basename in +- NCC) ++ NCC*) + # NonStop-UX NCC 3.20 + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + ;; +@@ -5721,7 +5060,14 @@ + ;; + esac + ;; +- unixware*) ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ case $cc_basename in ++ CC*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ esac + ;; + vxworks*) + ;; +@@ -5768,6 +5114,11 @@ + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fno-common' + ;; + ++ interix3*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; ++ + msdosdjgpp*) + # Just because we use GCC doesn't mean we suddenly get shared libraries + # on systems that don't support them. +@@ -5784,7 +5135,7 @@ + hpux*) + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. +- case "$host_cpu" in ++ case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; +@@ -5810,6 +5161,16 @@ + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-bnso -bI:/lib/syscalls.exp' + fi + ;; ++ darwin*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ case $cc_basename in ++ xlc*) ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-qnocommon' ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ ;; ++ esac ++ ;; + + mingw* | pw32* | os2*) + # This hack is so that the source file can tell whether it is being +@@ -5821,7 +5182,7 @@ + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but + # not for PA HP-UX. +- case "$host_cpu" in ++ case $host_cpu in + hppa*64*|ia64*) + # +Z the default + ;; +@@ -5844,13 +5205,20 @@ + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + +- linux*) +- case $CC in ++ linux* | k*bsd*-gnu) ++ case $cc_basename in + icc* | ecc*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-static' + ;; ++ pgcc* | pgf77* | pgf90* | pgf95*) ++ # Portland Group compilers (*not* the Pentium gcc compiler, ++ # which looks to be a dead project) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-fpic' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; + ccc*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + # All Alpha code is PIC. +@@ -5865,15 +5233,15 @@ + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-non_shared' + ;; + +- sco3.2v5*) +- _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-Kpic' +- _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-dn' +- ;; +- + solaris*) +- _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ case $cc_basename in ++ f77* | f90* | f95*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Qoption ld ';; ++ *) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,';; ++ esac + ;; + + sunos4*) +@@ -5882,7 +5250,7 @@ + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' + ;; + +- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ++ sysv4 | sysv4.2uw2* | sysv4.3*) + _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +@@ -5895,6 +5263,17 @@ + fi + ;; + ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-KPIC' ++ _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' ++ ;; ++ ++ unicos*) ++ _LT_AC_TAGVAR(lt_prog_compiler_wl, $1)='-Wl,' ++ _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no ++ ;; ++ + uts4*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)='-pic' + _LT_AC_TAGVAR(lt_prog_compiler_static, $1)='-Bstatic' +@@ -5922,7 +5301,7 @@ + [_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= + _LT_AC_TAGVAR(lt_prog_compiler_can_build_shared, $1)=no]) + fi +-case "$host_os" in ++case $host_os in + # For platforms which do not support PIC, -DPIC is meaningless: + *djgpp*) + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)= +@@ -5931,6 +5310,16 @@ + _LT_AC_TAGVAR(lt_prog_compiler_pic, $1)="$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1)ifelse([$1],[],[ -DPIC],[ifelse([$1],[CXX],[ -DPIC],[])])" + ;; + esac ++ ++# ++# Check to make sure the static flag actually works. ++# ++wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) eval lt_tmp_static_flag=\"$_LT_AC_TAGVAR(lt_prog_compiler_static, $1)\" ++AC_LIBTOOL_LINKER_OPTION([if $compiler static flag $lt_tmp_static_flag works], ++ _LT_AC_TAGVAR(lt_prog_compiler_static_works, $1), ++ $lt_tmp_static_flag, ++ [], ++ [_LT_AC_TAGVAR(lt_prog_compiler_static, $1)=]) + ]) - # libtool.m4 - Configure libtool for the host system. -*-Autoconf-*- --# serial 47 AC_PROG_LIBTOOL --# Debian $Rev: 9373 $ +@@ -5955,9 +5344,9 @@ + _LT_AC_TAGVAR(export_symbols_cmds, $1)="$ltdll_cmds" + ;; + cygwin* | mingw*) +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' ++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([[^ ]]*\) [[^ ]]*/\1 DATA/;/^I /d;/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + ;; +- linux*) ++ linux* | k*bsd*-gnu) + _LT_AC_TAGVAR(link_all_deplibs, $1)=no + ;; + *) +@@ -6001,7 +5390,8 @@ + # rely on this symbol name, it's probably fine to never include it in + # preloaded symbol tables. + extract_expsyms_cmds= - ++ # Just being paranoid about ensuring that cc_basename is set. ++ _LT_CC_BASENAME([$compiler]) + case $host_os in + cygwin* | mingw* | pw32*) + # FIXME: the MSVC++ port hasn't been tested in a loooong time +@@ -6011,6 +5401,10 @@ + with_gnu_ld=no + fi + ;; ++ interix*) ++ # we just hope/assume this is gcc and not c89 (= MSVC++) ++ with_gnu_ld=yes ++ ;; + openbsd*) + with_gnu_ld=no + ;; +@@ -6021,6 +5415,27 @@ + # If archive_cmds runs LD, not CC, wlarc should be empty + wlarc='${wl}' + ++ # Set some defaults for GNU ld with shared library support. These ++ # are reset later if shared libraries are not supported. Putting them ++ # here allows them to be overridden if necessary. ++ runpath_var=LD_RUN_PATH ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= ++ fi ++ supports_anon_versioning=no ++ case `$LD -v 2>/dev/null` in ++ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 ++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... ++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... ++ *\ 2.11.*) ;; # other 2.11 versions ++ *) supports_anon_versioning=yes ;; ++ esac ++ + # See if GNU ld supports shared libraries. + case $host_os in + aix3* | aix4* | aix5*) +@@ -6071,10 +5486,10 @@ + _LT_AC_TAGVAR(allow_undefined_flag, $1)=unsupported + _LT_AC_TAGVAR(always_export_symbols, $1)=no + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes +- _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' ++ _LT_AC_TAGVAR(export_symbols_cmds, $1)='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[[BCDGRS]] /s/.* \([[^ ]]*\)/\1 DATA/'\'' | $SED -e '\''/^[[AITW]] /s/.* //'\'' | sort | uniq > $export_symbols' + + if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + # If the export-symbols file already is a .def file (1st line + # is EXPORTS), use it as is; otherwise, prepend... + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then +@@ -6083,13 +5498,60 @@ + echo EXPORTS > $output_objdir/$soname.def; + cat $export_symbols >> $output_objdir/$soname.def; + fi~ +- $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--image-base=0x10000000 ${wl}--out-implib,$lib' ++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' + else +- ld_shlibs=no ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no + fi + ;; + +- netbsd* | netbsdelf*-gnu | knetbsd*-gnu) ++ interix3*) ++ _LT_AC_TAGVAR(hardcode_direct, $1)=no ++ _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; ++ ++ linux* | k*bsd*-gnu) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ tmp_addflag= ++ case $cc_basename,$host_cpu in ++ pgcc*) # Portland Group C compiler ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag' ++ ;; ++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag -Mnomain' ;; ++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 ++ tmp_addflag=' -i_dynamic' ;; ++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 ++ tmp_addflag=' -i_dynamic -nofor_main' ;; ++ ifc* | ifort*) # Intel Fortran compiler ++ tmp_addflag=' -nofor_main' ;; ++ esac ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ ++ if test $supports_anon_versioning = yes; then ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ $echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=no ++ else ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' + wlarc= +@@ -6099,7 +5561,7 @@ + fi + ;; + +- solaris* | sysv5*) ++ solaris*) + if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then + _LT_AC_TAGVAR(ld_shlibs, $1)=no + cat <&2 +@@ -6120,6 +5582,33 @@ + fi + ;; + ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) ++ case `$LD -v 2>&1` in ++ *\ [[01]].* | *\ 2.[[0-9]].* | *\ 2.1[[0-5]].*) ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not ++*** reliably create shared libraries on SCO systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++_LT_EOF ++ ;; ++ *) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' ++ else ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ fi ++ ;; ++ esac ++ ;; ++ + sunos4*) + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' + wlarc= +@@ -6127,32 +5616,6 @@ + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + +- linux*) +- if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then +- tmp_archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- _LT_AC_TAGVAR(archive_cmds, $1)="$tmp_archive_cmds" +- supports_anon_versioning=no +- case `$LD -v 2>/dev/null` in +- *\ [01].* | *\ 2.[[0-9]].* | *\ 2.10.*) ;; # catch versions < 2.11 +- *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... +- *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... +- *\ 2.11.*) ;; # other 2.11 versions +- *) supports_anon_versioning=yes ;; +- esac +- if test $supports_anon_versioning = yes; then +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $output_objdir/$libname.ver~ +-cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ +-$echo "local: *; };" >> $output_objdir/$libname.ver~ +- $CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' +- else +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="$tmp_archive_cmds" +- fi +- _LT_AC_TAGVAR(link_all_deplibs, $1)=no +- else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no +- fi +- ;; +- + *) + if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +@@ -6163,16 +5626,11 @@ + ;; + esac + +- if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = yes; then +- runpath_var=LD_RUN_PATH +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}--rpath ${wl}$libdir' +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}--export-dynamic' +- # ancient GNU ld didn't support --whole-archive et. al. +- if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= +- fi ++ if test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no; then ++ runpath_var= ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)= ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)= + fi + else + # PORTME fill in a description of your system's linker (not GNU ld) +@@ -6184,7 +5642,7 @@ + # Note: this linker hardcodes the directories in LIBPATH if there + # are no directories specified by -L. + _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes +- if test "$GCC" = yes && test -z "$link_static_flag"; then ++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then + # Neither direct hardcoding nor static linking is supported with a + # broken collect2. + _LT_AC_TAGVAR(hardcode_direct, $1)=unsupported +@@ -6218,6 +5676,7 @@ + break + fi + done ++ ;; + esac + + exp_sym_flag='-bexport' +@@ -6236,7 +5695,7 @@ + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + + if test "$GCC" = yes; then +- case $host_os in aix4.[012]|aix4.[012].*) ++ case $host_os in aix4.[[012]]|aix4.[[012]].*) + # We only want to do this on AIX 4.2 and lower, the check + # below for broken collect2 doesn't work under 4.3+ + collect2name=`${CC} -print-prog-name=collect2` +@@ -6255,8 +5714,12 @@ + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)= + fi ++ ;; + esac + shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi + else + # not using gcc + if test "$host_cpu" = ia64; then +@@ -6264,11 +5727,11 @@ + # chokes on -Wl,-G. The following line is correct: + shared_flag='-G' + else +- if test "$aix_use_runtimelinking" = yes; then ++ if test "$aix_use_runtimelinking" = yes; then + shared_flag='${wl}-G' + else + shared_flag='${wl}-bM:SRE' +- fi ++ fi + fi + fi + +@@ -6282,12 +5745,12 @@ + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-blibpath:$libdir:'"$aix_libpath" +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" + else + if test "$host_cpu" = ia64; then + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-R $libdir:/usr/lib:/lib' + _LT_AC_TAGVAR(allow_undefined_flag, $1)="-z nodefs" +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" + else + # Determine the default libpath from the value encoded in an empty executable. + _LT_AC_SYS_LIBPATH_AIX +@@ -6296,13 +5759,11 @@ + # -berok will link without error, but may produce a broken library. + _LT_AC_TAGVAR(no_undefined_flag, $1)=' ${wl}-bernotok' + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' ${wl}-berok' +- # -bexpall does not export symbols beginning with underscore (_) +- _LT_AC_TAGVAR(always_export_symbols, $1)=yes + # Exported symbols can be pulled into shared objects from archives +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)=' ' ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='$convenience' + _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=yes +- # This is similar to how AIX traditionally builds it's shared libraries. +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${wl}-bE:$export_symbols ${wl}-bnoentry${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ # This is similar to how AIX traditionally builds its shared libraries. ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' + fi + fi + ;; +@@ -6315,7 +5776,7 @@ + _LT_AC_TAGVAR(ld_shlibs, $1)=no + ;; + +- bsdi4*) ++ bsdi[[45]]*) + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)=-rdynamic + ;; + +@@ -6336,57 +5797,57 @@ + _LT_AC_TAGVAR(old_archive_From_new_cmds, $1)='true' + # FIXME: Should let the user specify the lib program. + _LT_AC_TAGVAR(old_archive_cmds, $1)='lib /OUT:$oldlib$oldobjs$old_deplibs' +- fix_srcfile_path='`cygpath -w "$srcfile"`' ++ _LT_AC_TAGVAR(fix_srcfile_path, $1)='`cygpath -w "$srcfile"`' + _LT_AC_TAGVAR(enable_shared_with_static_runtimes, $1)=yes + ;; + + darwin* | rhapsody*) +- if test "$GXX" = yes ; then +- _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no +- case "$host_os" in +- rhapsody* | darwin1.[[012]]) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined suppress' +- ;; +- *) # Darwin 1.3 on +- if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' +- else +- case ${MACOSX_DEPLOYMENT_TARGET} in +- 10.[[012]]) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-flat_namespace -undefined suppress' +- ;; +- 10.*) +- _LT_AC_TAGVAR(allow_undefined_flag, $1)='-undefined dynamic_lookup' +- ;; +- esac +- fi +- ;; ++ case $host_os in ++ rhapsody* | darwin1.[[012]]) ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}suppress' ++ ;; ++ *) # Darwin 1.3 on ++ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ else ++ case ${MACOSX_DEPLOYMENT_TARGET} in ++ 10.[[012]]) ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ ;; ++ 10.*) ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-undefined ${wl}dynamic_lookup' ++ ;; ++ esac ++ fi ++ ;; + esac +- lt_int_apple_cc_single_mod=no +- output_verbose_link_cmd='echo' +- if $CC -dumpspecs 2>&1 | grep 'single_module' >/dev/null ; then +- lt_int_apple_cc_single_mod=yes +- fi +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- else +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' +- fi +- _LT_AC_TAGVAR(module_cmds, $1)='$CC ${wl}-bind_at_load $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' +- # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin ld's +- if test "X$lt_int_apple_cc_single_mod" = Xyes ; then +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- else +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r ${wl}-bind_at_load -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' +- fi +- _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_automatic, $1)=yes + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=unsupported +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-all_load $convenience' ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='' + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++ if test "$GCC" = yes ; then ++ output_verbose_link_cmd='echo' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' ++ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' + else +- _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ case $cc_basename in ++ xlc*) ++ output_verbose_link_cmd='echo' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' ++ _LT_AC_TAGVAR(module_cmds, $1)='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ _LT_AC_TAGVAR(module_expsym_cmds, $1)='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ ;; ++ *) ++ _LT_AC_TAGVAR(ld_shlibs, $1)=no ++ ;; ++ esac + fi + ;; + +@@ -6420,7 +5881,7 @@ + ;; + + # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd* | kfreebsd*-gnu) ++ freebsd* | dragonfly*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-R$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=yes +@@ -6443,47 +5904,62 @@ + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + ;; + +- hpux10* | hpux11*) ++ hpux10*) + if test "$GCC" = yes -a "$with_gnu_ld" = no; then +- case "$host_cpu" in +- hppa*64*|ia64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ if test "$with_gnu_ld" = no; then ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ _LT_AC_TAGVAR(hardcode_direct, $1)=yes ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes ++ fi ++ ;; ++ ++ hpux11*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ case $host_cpu in ++ hppa*64*) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + ;; ++ ia64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; + *) + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + else +- case "$host_cpu" in +- hppa*64*|ia64*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname -o $lib $libobjs $deplibs $linker_flags' ++ case $host_cpu in ++ hppa*64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' + ;; + *) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' + ;; + esac + fi + if test "$with_gnu_ld" = no; then +- case "$host_cpu" in +- hppa*64*) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) + _LT_AC_TAGVAR(hardcode_libdir_flag_spec_ld, $1)='+b $libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: +- _LT_AC_TAGVAR(hardcode_direct, $1)=no +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- ;; +- ia64*) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-L$libdir' + _LT_AC_TAGVAR(hardcode_direct, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- +- # hardcode_minus_L: Not really in the search PATH, +- # but as the default location of the library. +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=yes + ;; + *) +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}+b ${wl}$libdir' +- _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + _LT_AC_TAGVAR(hardcode_direct, $1)=yes + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + +@@ -6507,7 +5983,7 @@ + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; + +- netbsd* | netbsdelf*-gnu | knetbsd*-gnu) ++ netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out + else +@@ -6531,6 +6007,7 @@ + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='${wl}-rpath,$libdir' + _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-E' + else +@@ -6576,7 +6053,7 @@ + _LT_AC_TAGVAR(allow_undefined_flag, $1)=' -expect_unresolved \*' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ +- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' ++ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' + + # Both c and cxx compiler support -rpath directly + _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='-rpath $libdir' +@@ -6584,21 +6061,15 @@ + _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=: + ;; + +- sco3.2v5*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- ;; +- + solaris*) + _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' + if test "$GCC" = yes; then ++ wlarc='${wl}' + _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' + else ++ wlarc='' + _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' + _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ + $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +@@ -6607,8 +6078,18 @@ + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + case $host_os in + solaris2.[[0-5]] | solaris2.[[0-5]].*) ;; +- *) # Supported since Solaris 2.6 (maybe 2.5.1?) +- _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; ++ *) ++ # The compiler driver will combine linker options so we ++ # cannot just pass the convience library names through ++ # without $wl, iff we do not link with $LD. ++ # Luckily, gcc supports the same syntax we need for Sun Studio. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ case $wlarc in ++ '') ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='-z allextract$convenience -z defaultextract' ;; ++ *) ++ _LT_AC_TAGVAR(whole_archive_flag_spec, $1)='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; ++ esac ;; + esac + _LT_AC_TAGVAR(link_all_deplibs, $1)=yes + ;; +@@ -6665,36 +6146,45 @@ + fi + ;; + +- sysv4.2uw2*) +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(hardcode_direct, $1)=yes +- _LT_AC_TAGVAR(hardcode_minus_L, $1)=no ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[[01]].[[10]]* | unixware7*) ++ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no +- hardcode_runpath_var=yes +- runpath_var=LD_RUN_PATH +- ;; ++ runpath_var='LD_RUN_PATH' + +- sysv5OpenUNIX8* | sysv5UnixWare7* | sysv5uw[[78]]* | unixware7*) +- _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z ${wl}text' + if test "$GCC" = yes; then +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + else +- _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' + fi +- runpath_var='LD_RUN_PATH' +- _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no + ;; + +- sysv5*) +- _LT_AC_TAGVAR(no_undefined_flag, $1)=' -z text' +- # $CC -shared without GNU ld will not create a library from C++ +- # object files and a static libstdc++, better avoid it by now +- _LT_AC_TAGVAR(archive_cmds, $1)='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)= ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ _LT_AC_TAGVAR(no_undefined_flag, $1)='${wl}-z,text' ++ _LT_AC_TAGVAR(allow_undefined_flag, $1)='${wl}-z,nodefs' ++ _LT_AC_TAGVAR(archive_cmds_need_lc, $1)=no + _LT_AC_TAGVAR(hardcode_shlibpath_var, $1)=no ++ _LT_AC_TAGVAR(hardcode_libdir_flag_spec, $1)='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' ++ _LT_AC_TAGVAR(hardcode_libdir_separator, $1)=':' ++ _LT_AC_TAGVAR(link_all_deplibs, $1)=yes ++ _LT_AC_TAGVAR(export_dynamic_flag_spec, $1)='${wl}-Bexport' + runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ _LT_AC_TAGVAR(archive_cmds, $1)='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ _LT_AC_TAGVAR(archive_expsym_cmds, $1)='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi + ;; + + uts4*) +@@ -6712,11 +6202,6 @@ + AC_MSG_RESULT([$_LT_AC_TAGVAR(ld_shlibs, $1)]) + test "$_LT_AC_TAGVAR(ld_shlibs, $1)" = no && can_build_shared=no + +-variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +-if test "$GCC" = yes; then +- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +-fi +- + # + # Do we need to explicitly link libc? + # +@@ -6744,6 +6229,7 @@ + libobjs=conftest.$ac_objext + deplibs= + wl=$_LT_AC_TAGVAR(lt_prog_compiler_wl, $1) ++ pic_flag=$_LT_AC_TAGVAR(lt_prog_compiler_pic, $1) + compiler_flags=-v + linker_flags=-v + verstring= +@@ -6869,7 +6355,7 @@ + # Add /usr/xpg4/bin/sed as it is typically found on Solaris + # along with /bin/sed that truncates output. + for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do +- test ! -f $lt_ac_sed && break ++ test ! -f $lt_ac_sed && continue + cat /dev/null > conftest.in + lt_ac_count=0 + echo $ECHO_N "0123456789$ECHO_C" >conftest.in +@@ -6894,8 +6380,878 @@ + fi + done + done +-SED=$lt_cv_path_SED + ]) ++SED=$lt_cv_path_SED + AC_MSG_RESULT([$SED]) + ]) + ++# Copyright (C) 2002, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# AM_AUTOMAKE_VERSION(VERSION) ++# ---------------------------- ++# Automake X.Y traces this macro to ensure aclocal.m4 has been ++# generated from the m4 files accompanying Automake X.Y. ++AC_DEFUN([AM_AUTOMAKE_VERSION], [am__api_version="1.9"]) ++ ++# AM_SET_CURRENT_AUTOMAKE_VERSION ++# ------------------------------- ++# Call AM_AUTOMAKE_VERSION so it can be traced. ++# This function is AC_REQUIREd by AC_INIT_AUTOMAKE. ++AC_DEFUN([AM_SET_CURRENT_AUTOMAKE_VERSION], ++ [AM_AUTOMAKE_VERSION([1.9.6])]) ++ ++# AM_AUX_DIR_EXPAND -*- Autoconf -*- ++ ++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# For projects using AC_CONFIG_AUX_DIR([foo]), Autoconf sets ++# $ac_aux_dir to `$srcdir/foo'. In other projects, it is set to ++# `$srcdir', `$srcdir/..', or `$srcdir/../..'. ++# ++# Of course, Automake must honor this variable whenever it calls a ++# tool from the auxiliary directory. The problem is that $srcdir (and ++# therefore $ac_aux_dir as well) can be either absolute or relative, ++# depending on how configure is run. This is pretty annoying, since ++# it makes $ac_aux_dir quite unusable in subdirectories: in the top ++# source directory, any form will work fine, but in subdirectories a ++# relative path needs to be adjusted first. ++# ++# $ac_aux_dir/missing ++# fails when called from a subdirectory if $ac_aux_dir is relative ++# $top_srcdir/$ac_aux_dir/missing ++# fails if $ac_aux_dir is absolute, ++# fails when called from a subdirectory in a VPATH build with ++# a relative $ac_aux_dir ++# ++# The reason of the latter failure is that $top_srcdir and $ac_aux_dir ++# are both prefixed by $srcdir. In an in-source build this is usually ++# harmless because $srcdir is `.', but things will broke when you ++# start a VPATH build or use an absolute $srcdir. ++# ++# So we could use something similar to $top_srcdir/$ac_aux_dir/missing, ++# iff we strip the leading $srcdir from $ac_aux_dir. That would be: ++# am_aux_dir='\$(top_srcdir)/'`expr "$ac_aux_dir" : "$srcdir//*\(.*\)"` ++# and then we would define $MISSING as ++# MISSING="\${SHELL} $am_aux_dir/missing" ++# This will work as long as MISSING is not called from configure, because ++# unfortunately $(top_srcdir) has no meaning in configure. ++# However there are other variables, like CC, which are often used in ++# configure, and could therefore not use this "fixed" $ac_aux_dir. ++# ++# Another solution, used here, is to always expand $ac_aux_dir to an ++# absolute PATH. The drawback is that using absolute paths prevent a ++# configured tree to be moved without reconfiguration. ++ ++AC_DEFUN([AM_AUX_DIR_EXPAND], ++[dnl Rely on autoconf to set up CDPATH properly. ++AC_PREREQ([2.50])dnl ++# expand $ac_aux_dir to an absolute path ++am_aux_dir=`cd $ac_aux_dir && pwd` ++]) ++ ++# AM_CONDITIONAL -*- Autoconf -*- ++ ++# Copyright (C) 1997, 2000, 2001, 2003, 2004, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 7 ++ ++# AM_CONDITIONAL(NAME, SHELL-CONDITION) ++# ------------------------------------- ++# Define a conditional. ++AC_DEFUN([AM_CONDITIONAL], ++[AC_PREREQ(2.52)dnl ++ ifelse([$1], [TRUE], [AC_FATAL([$0: invalid condition: $1])], ++ [$1], [FALSE], [AC_FATAL([$0: invalid condition: $1])])dnl ++AC_SUBST([$1_TRUE]) ++AC_SUBST([$1_FALSE]) ++if $2; then ++ $1_TRUE= ++ $1_FALSE='#' ++else ++ $1_TRUE='#' ++ $1_FALSE= ++fi ++AC_CONFIG_COMMANDS_PRE( ++[if test -z "${$1_TRUE}" && test -z "${$1_FALSE}"; then ++ AC_MSG_ERROR([[conditional "$1" was never defined. ++Usually this means the macro was only invoked conditionally.]]) ++fi])]) ++ ++ ++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 8 ++ ++# There are a few dirty hacks below to avoid letting `AC_PROG_CC' be ++# written in clear, in which case automake, when reading aclocal.m4, ++# will think it sees a *use*, and therefore will trigger all it's ++# C support machinery. Also note that it means that autoscan, seeing ++# CC etc. in the Makefile, will ask for an AC_PROG_CC use... ++ ++ ++# _AM_DEPENDENCIES(NAME) ++# ---------------------- ++# See how the compiler implements dependency checking. ++# NAME is "CC", "CXX", "GCJ", or "OBJC". ++# We try a few techniques and use that to set a single cache variable. ++# ++# We don't AC_REQUIRE the corresponding AC_PROG_CC since the latter was ++# modified to invoke _AM_DEPENDENCIES(CC); we would have a circular ++# dependency, and given that the user is not expected to run this macro, ++# just rely on AC_PROG_CC. ++AC_DEFUN([_AM_DEPENDENCIES], ++[AC_REQUIRE([AM_SET_DEPDIR])dnl ++AC_REQUIRE([AM_OUTPUT_DEPENDENCY_COMMANDS])dnl ++AC_REQUIRE([AM_MAKE_INCLUDE])dnl ++AC_REQUIRE([AM_DEP_TRACK])dnl ++ ++ifelse([$1], CC, [depcc="$CC" am_compiler_list=], ++ [$1], CXX, [depcc="$CXX" am_compiler_list=], ++ [$1], OBJC, [depcc="$OBJC" am_compiler_list='gcc3 gcc'], ++ [$1], GCJ, [depcc="$GCJ" am_compiler_list='gcc3 gcc'], ++ [depcc="$$1" am_compiler_list=]) ++ ++AC_CACHE_CHECK([dependency style of $depcc], ++ [am_cv_$1_dependencies_compiler_type], ++[if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then ++ # We make a subdir and do the tests there. Otherwise we can end up ++ # making bogus files that we don't know about and never remove. For ++ # instance it was reported that on HP-UX the gcc test will end up ++ # making a dummy file named `D' -- because `-MD' means `put the output ++ # in D'. ++ mkdir conftest.dir ++ # Copy depcomp to subdir because otherwise we won't find it if we're ++ # using a relative directory. ++ cp "$am_depcomp" conftest.dir ++ cd conftest.dir ++ # We will build objects and dependencies in a subdirectory because ++ # it helps to detect inapplicable dependency modes. For instance ++ # both Tru64's cc and ICC support -MD to output dependencies as a ++ # side effect of compilation, but ICC will put the dependencies in ++ # the current directory while Tru64 will put them in the object ++ # directory. ++ mkdir sub ++ ++ am_cv_$1_dependencies_compiler_type=none ++ if test "$am_compiler_list" = ""; then ++ am_compiler_list=`sed -n ['s/^#*\([a-zA-Z0-9]*\))$/\1/p'] < ./depcomp` ++ fi ++ for depmode in $am_compiler_list; do ++ # Setup a source with many dependencies, because some compilers ++ # like to wrap large dependency lists on column 80 (with \), and ++ # we should not choose a depcomp mode which is confused by this. ++ # ++ # We need to recreate these files for each test, as the compiler may ++ # overwrite some of them when testing with obscure command lines. ++ # This happens at least with the AIX C compiler. ++ : > sub/conftest.c ++ for i in 1 2 3 4 5 6; do ++ echo '#include "conftst'$i'.h"' >> sub/conftest.c ++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with ++ # Solaris 8's {/usr,}/bin/sh. ++ touch sub/conftst$i.h ++ done ++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf ++ ++ case $depmode in ++ nosideeffect) ++ # after this tag, mechanisms are not by side-effect, so they'll ++ # only be used when explicitly requested ++ if test "x$enable_dependency_tracking" = xyes; then ++ continue ++ else ++ break ++ fi ++ ;; ++ none) break ;; ++ esac ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. ++ if depmode=$depmode \ ++ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ ++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ ++ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ ++ >/dev/null 2>conftest.err && ++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && ++ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then ++ # icc doesn't choke on unknown options, it will just issue warnings ++ # or remarks (even with -Werror). So we grep stderr for any message ++ # that says an option was ignored or not supported. ++ # When given -MP, icc 7.0 and 7.1 complain thusly: ++ # icc: Command line warning: ignoring option '-M'; no argument required ++ # The diagnosis changed in icc 8.0: ++ # icc: Command line remark: option '-MP' not supported ++ if (grep 'ignoring option' conftest.err || ++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else ++ am_cv_$1_dependencies_compiler_type=$depmode ++ break ++ fi ++ fi ++ done ++ ++ cd .. ++ rm -rf conftest.dir ++else ++ am_cv_$1_dependencies_compiler_type=none ++fi ++]) ++AC_SUBST([$1DEPMODE], [depmode=$am_cv_$1_dependencies_compiler_type]) ++AM_CONDITIONAL([am__fastdep$1], [ ++ test "x$enable_dependency_tracking" != xno \ ++ && test "$am_cv_$1_dependencies_compiler_type" = gcc3]) ++]) ++ ++ ++# AM_SET_DEPDIR ++# ------------- ++# Choose a directory name for dependency files. ++# This macro is AC_REQUIREd in _AM_DEPENDENCIES ++AC_DEFUN([AM_SET_DEPDIR], ++[AC_REQUIRE([AM_SET_LEADING_DOT])dnl ++AC_SUBST([DEPDIR], ["${am__leading_dot}deps"])dnl ++]) ++ ++ ++# AM_DEP_TRACK ++# ------------ ++AC_DEFUN([AM_DEP_TRACK], ++[AC_ARG_ENABLE(dependency-tracking, ++[ --disable-dependency-tracking speeds up one-time build ++ --enable-dependency-tracking do not reject slow dependency extractors]) ++if test "x$enable_dependency_tracking" != xno; then ++ am_depcomp="$ac_aux_dir/depcomp" ++ AMDEPBACKSLASH='\' ++fi ++AM_CONDITIONAL([AMDEP], [test "x$enable_dependency_tracking" != xno]) ++AC_SUBST([AMDEPBACKSLASH]) ++]) ++ ++# Generate code to set up dependency tracking. -*- Autoconf -*- ++ ++# Copyright (C) 1999, 2000, 2001, 2002, 2003, 2004, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++#serial 3 ++ ++# _AM_OUTPUT_DEPENDENCY_COMMANDS ++# ------------------------------ ++AC_DEFUN([_AM_OUTPUT_DEPENDENCY_COMMANDS], ++[for mf in $CONFIG_FILES; do ++ # Strip MF so we end up with the name of the file. ++ mf=`echo "$mf" | sed -e 's/:.*$//'` ++ # Check whether this is an Automake generated Makefile or not. ++ # We used to match only the files named `Makefile.in', but ++ # some people rename them; so instead we look at the file content. ++ # Grep'ing the first line is not enough: some people post-process ++ # each Makefile.in and add a new line on top of each file to say so. ++ # So let's grep whole file. ++ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then ++ dirpart=`AS_DIRNAME("$mf")` ++ else ++ continue ++ fi ++ # Extract the definition of DEPDIR, am__include, and am__quote ++ # from the Makefile without running `make'. ++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` ++ test -z "$DEPDIR" && continue ++ am__include=`sed -n 's/^am__include = //p' < "$mf"` ++ test -z "am__include" && continue ++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` ++ # When using ansi2knr, U may be empty or an underscore; expand it ++ U=`sed -n 's/^U = //p' < "$mf"` ++ # Find all dependency output files, they are included files with ++ # $(DEPDIR) in their names. We invoke sed twice because it is the ++ # simplest approach to changing $(DEPDIR) to its actual value in the ++ # expansion. ++ for file in `sed -n " ++ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ ++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do ++ # Make sure the directory exists. ++ test -f "$dirpart/$file" && continue ++ fdir=`AS_DIRNAME(["$file"])` ++ AS_MKDIR_P([$dirpart/$fdir]) ++ # echo "creating $dirpart/$file" ++ echo '# dummy' > "$dirpart/$file" ++ done ++done ++])# _AM_OUTPUT_DEPENDENCY_COMMANDS ++ ++ ++# AM_OUTPUT_DEPENDENCY_COMMANDS ++# ----------------------------- ++# This macro should only be invoked once -- use via AC_REQUIRE. ++# ++# This code is only required when automatic dependency tracking ++# is enabled. FIXME. This creates each `.P' file that we will ++# need in order to bootstrap the dependency handling code. ++AC_DEFUN([AM_OUTPUT_DEPENDENCY_COMMANDS], ++[AC_CONFIG_COMMANDS([depfiles], ++ [test x"$AMDEP_TRUE" != x"" || _AM_OUTPUT_DEPENDENCY_COMMANDS], ++ [AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir"]) ++]) ++ ++# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 8 ++ ++# AM_CONFIG_HEADER is obsolete. It has been replaced by AC_CONFIG_HEADERS. ++AU_DEFUN([AM_CONFIG_HEADER], [AC_CONFIG_HEADERS($@)]) ++ ++# Do all the work for Automake. -*- Autoconf -*- ++ ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2002, 2003, 2004, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 12 ++ ++# This macro actually does too much. Some checks are only needed if ++# your package does certain things. But this isn't really a big deal. ++ ++# AM_INIT_AUTOMAKE(PACKAGE, VERSION, [NO-DEFINE]) ++# AM_INIT_AUTOMAKE([OPTIONS]) ++# ----------------------------------------------- ++# The call with PACKAGE and VERSION arguments is the old style ++# call (pre autoconf-2.50), which is being phased out. PACKAGE ++# and VERSION should now be passed to AC_INIT and removed from ++# the call to AM_INIT_AUTOMAKE. ++# We support both call styles for the transition. After ++# the next Automake release, Autoconf can make the AC_INIT ++# arguments mandatory, and then we can depend on a new Autoconf ++# release and drop the old call support. ++AC_DEFUN([AM_INIT_AUTOMAKE], ++[AC_PREREQ([2.58])dnl ++dnl Autoconf wants to disallow AM_ names. We explicitly allow ++dnl the ones we care about. ++m4_pattern_allow([^AM_[A-Z]+FLAGS$])dnl ++AC_REQUIRE([AM_SET_CURRENT_AUTOMAKE_VERSION])dnl ++AC_REQUIRE([AC_PROG_INSTALL])dnl ++# test to see if srcdir already configured ++if test "`cd $srcdir && pwd`" != "`pwd`" && ++ test -f $srcdir/config.status; then ++ AC_MSG_ERROR([source directory already configured; run "make distclean" there first]) ++fi ++ ++# test whether we have cygpath ++if test -z "$CYGPATH_W"; then ++ if (cygpath --version) >/dev/null 2>/dev/null; then ++ CYGPATH_W='cygpath -w' ++ else ++ CYGPATH_W=echo ++ fi ++fi ++AC_SUBST([CYGPATH_W]) ++ ++# Define the identity of the package. ++dnl Distinguish between old-style and new-style calls. ++m4_ifval([$2], ++[m4_ifval([$3], [_AM_SET_OPTION([no-define])])dnl ++ AC_SUBST([PACKAGE], [$1])dnl ++ AC_SUBST([VERSION], [$2])], ++[_AM_SET_OPTIONS([$1])dnl ++ AC_SUBST([PACKAGE], ['AC_PACKAGE_TARNAME'])dnl ++ AC_SUBST([VERSION], ['AC_PACKAGE_VERSION'])])dnl ++ ++_AM_IF_OPTION([no-define],, ++[AC_DEFINE_UNQUOTED(PACKAGE, "$PACKAGE", [Name of package]) ++ AC_DEFINE_UNQUOTED(VERSION, "$VERSION", [Version number of package])])dnl ++ ++# Some tools Automake needs. ++AC_REQUIRE([AM_SANITY_CHECK])dnl ++AC_REQUIRE([AC_ARG_PROGRAM])dnl ++AM_MISSING_PROG(ACLOCAL, aclocal-${am__api_version}) ++AM_MISSING_PROG(AUTOCONF, autoconf) ++AM_MISSING_PROG(AUTOMAKE, automake-${am__api_version}) ++AM_MISSING_PROG(AUTOHEADER, autoheader) ++AM_MISSING_PROG(MAKEINFO, makeinfo) ++AM_PROG_INSTALL_SH ++AM_PROG_INSTALL_STRIP ++AC_REQUIRE([AM_PROG_MKDIR_P])dnl ++# We need awk for the "check" target. The system "awk" is bad on ++# some platforms. ++AC_REQUIRE([AC_PROG_AWK])dnl ++AC_REQUIRE([AC_PROG_MAKE_SET])dnl ++AC_REQUIRE([AM_SET_LEADING_DOT])dnl ++_AM_IF_OPTION([tar-ustar], [_AM_PROG_TAR([ustar])], ++ [_AM_IF_OPTION([tar-pax], [_AM_PROG_TAR([pax])], ++ [_AM_PROG_TAR([v7])])]) ++_AM_IF_OPTION([no-dependencies],, ++[AC_PROVIDE_IFELSE([AC_PROG_CC], ++ [_AM_DEPENDENCIES(CC)], ++ [define([AC_PROG_CC], ++ defn([AC_PROG_CC])[_AM_DEPENDENCIES(CC)])])dnl ++AC_PROVIDE_IFELSE([AC_PROG_CXX], ++ [_AM_DEPENDENCIES(CXX)], ++ [define([AC_PROG_CXX], ++ defn([AC_PROG_CXX])[_AM_DEPENDENCIES(CXX)])])dnl ++]) ++]) ++ ++ ++# When config.status generates a header, we must update the stamp-h file. ++# This file resides in the same directory as the config header ++# that is generated. The stamp files are numbered to have different names. ++ ++# Autoconf calls _AC_AM_CONFIG_HEADER_HOOK (when defined) in the ++# loop where config.status creates the headers, so we can generate ++# our stamp files there. ++AC_DEFUN([_AC_AM_CONFIG_HEADER_HOOK], ++[# Compute $1's index in $config_headers. ++_am_stamp_count=1 ++for _am_header in $config_headers :; do ++ case $_am_header in ++ $1 | $1:* ) ++ break ;; ++ * ) ++ _am_stamp_count=`expr $_am_stamp_count + 1` ;; ++ esac ++done ++echo "timestamp for $1" >`AS_DIRNAME([$1])`/stamp-h[]$_am_stamp_count]) ++ ++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# AM_PROG_INSTALL_SH ++# ------------------ ++# Define $install_sh. ++AC_DEFUN([AM_PROG_INSTALL_SH], ++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++install_sh=${install_sh-"$am_aux_dir/install-sh"} ++AC_SUBST(install_sh)]) ++ ++# Copyright (C) 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 2 ++ ++# Check whether the underlying file-system supports filenames ++# with a leading dot. For instance MS-DOS doesn't. ++AC_DEFUN([AM_SET_LEADING_DOT], ++[rm -rf .tst 2>/dev/null ++mkdir .tst 2>/dev/null ++if test -d .tst; then ++ am__leading_dot=. ++else ++ am__leading_dot=_ ++fi ++rmdir .tst 2>/dev/null ++AC_SUBST([am__leading_dot])]) ++ ++# Copyright (C) 1998, 1999, 2000, 2001, 2002, 2003, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 5 ++ ++# AM_PROG_LEX ++# ----------- ++# Autoconf leaves LEX=: if lex or flex can't be found. Change that to a ++# "missing" invocation, for better error output. ++AC_DEFUN([AM_PROG_LEX], ++[AC_PREREQ(2.50)dnl ++AC_REQUIRE([AM_MISSING_HAS_RUN])dnl ++AC_REQUIRE([AC_PROG_LEX])dnl ++if test "$LEX" = :; then ++ LEX=${am_missing_run}flex ++fi]) ++ ++# Check to see how 'make' treats includes. -*- Autoconf -*- ++ ++# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 3 ++ ++# AM_MAKE_INCLUDE() ++# ----------------- ++# Check to see how make treats includes. ++AC_DEFUN([AM_MAKE_INCLUDE], ++[am_make=${MAKE-make} ++cat > confinc << 'END' ++am__doit: ++ @echo done ++.PHONY: am__doit ++END ++# If we don't find an include directive, just comment out the code. ++AC_MSG_CHECKING([for style of include used by $am_make]) ++am__include="#" ++am__quote= ++_am_result=none ++# First try GNU make style include. ++echo "include confinc" > confmf ++# We grep out `Entering directory' and `Leaving directory' ++# messages which can occur if `w' ends up in MAKEFLAGS. ++# In particular we don't look at `^make:' because GNU make might ++# be invoked under some other name (usually "gmake"), in which ++# case it prints its new name instead of `make'. ++if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then ++ am__include=include ++ am__quote= ++ _am_result=GNU ++fi ++# Now try BSD make style include. ++if test "$am__include" = "#"; then ++ echo '.include "confinc"' > confmf ++ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then ++ am__include=.include ++ am__quote="\"" ++ _am_result=BSD ++ fi ++fi ++AC_SUBST([am__include]) ++AC_SUBST([am__quote]) ++AC_MSG_RESULT([$_am_result]) ++rm -f confinc confmf ++]) ++ ++# Fake the existence of programs that GNU maintainers use. -*- Autoconf -*- ++ ++# Copyright (C) 1997, 1999, 2000, 2001, 2003, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 4 ++ ++# AM_MISSING_PROG(NAME, PROGRAM) ++# ------------------------------ ++AC_DEFUN([AM_MISSING_PROG], ++[AC_REQUIRE([AM_MISSING_HAS_RUN]) ++$1=${$1-"${am_missing_run}$2"} ++AC_SUBST($1)]) ++ ++ ++# AM_MISSING_HAS_RUN ++# ------------------ ++# Define MISSING if not defined so far and test if it supports --run. ++# If it does, set am_missing_run to use it, otherwise, to nothing. ++AC_DEFUN([AM_MISSING_HAS_RUN], ++[AC_REQUIRE([AM_AUX_DIR_EXPAND])dnl ++test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" ++# Use eval to expand $SHELL ++if eval "$MISSING --run true"; then ++ am_missing_run="$MISSING --run " ++else ++ am_missing_run= ++ AC_MSG_WARN([`missing' script is too old or missing]) ++fi ++]) ++ ++# Copyright (C) 2003, 2004, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# AM_PROG_MKDIR_P ++# --------------- ++# Check whether `mkdir -p' is supported, fallback to mkinstalldirs otherwise. ++# ++# Automake 1.8 used `mkdir -m 0755 -p --' to ensure that directories ++# created by `make install' are always world readable, even if the ++# installer happens to have an overly restrictive umask (e.g. 077). ++# This was a mistake. There are at least two reasons why we must not ++# use `-m 0755': ++# - it causes special bits like SGID to be ignored, ++# - it may be too restrictive (some setups expect 775 directories). ++# ++# Do not use -m 0755 and let people choose whatever they expect by ++# setting umask. ++# ++# We cannot accept any implementation of `mkdir' that recognizes `-p'. ++# Some implementations (such as Solaris 8's) are not thread-safe: if a ++# parallel make tries to run `mkdir -p a/b' and `mkdir -p a/c' ++# concurrently, both version can detect that a/ is missing, but only ++# one can create it and the other will error out. Consequently we ++# restrict ourselves to GNU make (using the --version option ensures ++# this.) ++AC_DEFUN([AM_PROG_MKDIR_P], ++[if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then ++ # We used to keeping the `.' as first argument, in order to ++ # allow $(mkdir_p) to be used without argument. As in ++ # $(mkdir_p) $(somedir) ++ # where $(somedir) is conditionally defined. However this is wrong ++ # for two reasons: ++ # 1. if the package is installed by a user who cannot write `.' ++ # make install will fail, ++ # 2. the above comment should most certainly read ++ # $(mkdir_p) $(DESTDIR)$(somedir) ++ # so it does not work when $(somedir) is undefined and ++ # $(DESTDIR) is not. ++ # To support the latter case, we have to write ++ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), ++ # so the `.' trick is pointless. ++ mkdir_p='mkdir -p --' ++else ++ # On NextStep and OpenStep, the `mkdir' command does not ++ # recognize any option. It will interpret all options as ++ # directories to create, and then abort because `.' already ++ # exists. ++ for d in ./-p ./--version; ++ do ++ test -d $d && rmdir $d ++ done ++ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. ++ if test -f "$ac_aux_dir/mkinstalldirs"; then ++ mkdir_p='$(mkinstalldirs)' ++ else ++ mkdir_p='$(install_sh) -d' ++ fi ++fi ++AC_SUBST([mkdir_p])]) ++ ++# Helper functions for option handling. -*- Autoconf -*- ++ ++# Copyright (C) 2001, 2002, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 3 ++ ++# _AM_MANGLE_OPTION(NAME) ++# ----------------------- ++AC_DEFUN([_AM_MANGLE_OPTION], ++[[_AM_OPTION_]m4_bpatsubst($1, [[^a-zA-Z0-9_]], [_])]) ++ ++# _AM_SET_OPTION(NAME) ++# ------------------------------ ++# Set option NAME. Presently that only means defining a flag for this option. ++AC_DEFUN([_AM_SET_OPTION], ++[m4_define(_AM_MANGLE_OPTION([$1]), 1)]) ++ ++# _AM_SET_OPTIONS(OPTIONS) ++# ---------------------------------- ++# OPTIONS is a space-separated list of Automake options. ++AC_DEFUN([_AM_SET_OPTIONS], ++[AC_FOREACH([_AM_Option], [$1], [_AM_SET_OPTION(_AM_Option)])]) ++ ++# _AM_IF_OPTION(OPTION, IF-SET, [IF-NOT-SET]) ++# ------------------------------------------- ++# Execute IF-SET if OPTION is set, IF-NOT-SET otherwise. ++AC_DEFUN([_AM_IF_OPTION], ++[m4_ifset(_AM_MANGLE_OPTION([$1]), [$2], [$3])]) ++ ++# Check to make sure that the build environment is sane. -*- Autoconf -*- ++ ++# Copyright (C) 1996, 1997, 2000, 2001, 2003, 2005 ++# Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 4 ++ ++# AM_SANITY_CHECK ++# --------------- ++AC_DEFUN([AM_SANITY_CHECK], ++[AC_MSG_CHECKING([whether build environment is sane]) ++# Just in case ++sleep 1 ++echo timestamp > conftest.file ++# Do `set' in a subshell so we don't clobber the current shell's ++# arguments. Must try -L first in case configure is actually a ++# symlink; some systems play weird games with the mod time of symlinks ++# (eg FreeBSD returns the mod time of the symlink's containing ++# directory). ++if ( ++ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` ++ if test "$[*]" = "X"; then ++ # -L didn't work. ++ set X `ls -t $srcdir/configure conftest.file` ++ fi ++ rm -f conftest.file ++ if test "$[*]" != "X $srcdir/configure conftest.file" \ ++ && test "$[*]" != "X conftest.file $srcdir/configure"; then ++ ++ # If neither matched, then we have a broken ls. This can happen ++ # if, for instance, CONFIG_SHELL is bash and it inherits a ++ # broken ls alias from the environment. This has actually ++ # happened. Such a system could not be considered "sane". ++ AC_MSG_ERROR([ls -t appears to fail. Make sure there is not a broken ++alias in your environment]) ++ fi ++ ++ test "$[2]" = conftest.file ++ ) ++then ++ # Ok. ++ : ++else ++ AC_MSG_ERROR([newly created file is older than distributed files! ++Check your system clock]) ++fi ++AC_MSG_RESULT(yes)]) ++ ++# Copyright (C) 2001, 2003, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# AM_PROG_INSTALL_STRIP ++# --------------------- ++# One issue with vendor `install' (even GNU) is that you can't ++# specify the program used to strip binaries. This is especially ++# annoying in cross-compiling environments, where the build's strip ++# is unlikely to handle the host's binaries. ++# Fortunately install-sh will honor a STRIPPROG variable, so we ++# always use install-sh in `make install-strip', and initialize ++# STRIPPROG with the value of the STRIP variable (set by the user). ++AC_DEFUN([AM_PROG_INSTALL_STRIP], ++[AC_REQUIRE([AM_PROG_INSTALL_SH])dnl ++# Installed binaries are usually stripped using `strip' when the user ++# run `make install-strip'. However `strip' might not be the right ++# tool to use in cross-compilation environments, therefore Automake ++# will honor the `STRIP' environment variable to overrule this program. ++dnl Don't test for $cross_compiling = yes, because it might be `maybe'. ++if test "$cross_compiling" != no; then ++ AC_CHECK_TOOL([STRIP], [strip], :) ++fi ++INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" ++AC_SUBST([INSTALL_STRIP_PROGRAM])]) ++ ++# Check how to create a tarball. -*- Autoconf -*- ++ ++# Copyright (C) 2004, 2005 Free Software Foundation, Inc. ++# ++# This file is free software; the Free Software Foundation ++# gives unlimited permission to copy and/or distribute it, ++# with or without modifications, as long as this notice is preserved. ++ ++# serial 2 ++ ++# _AM_PROG_TAR(FORMAT) ++# -------------------- ++# Check how to create a tarball in format FORMAT. ++# FORMAT should be one of `v7', `ustar', or `pax'. ++# ++# Substitute a variable $(am__tar) that is a command ++# writing to stdout a FORMAT-tarball containing the directory ++# $tardir. ++# tardir=directory && $(am__tar) > result.tar ++# ++# Substitute a variable $(am__untar) that extract such ++# a tarball read from stdin. ++# $(am__untar) < result.tar ++AC_DEFUN([_AM_PROG_TAR], ++[# Always define AMTAR for backward compatibility. ++AM_MISSING_PROG([AMTAR], [tar]) ++m4_if([$1], [v7], ++ [am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -'], ++ [m4_case([$1], [ustar],, [pax],, ++ [m4_fatal([Unknown tar format])]) ++AC_MSG_CHECKING([how to create a $1 tar archive]) ++# Loop over all known methods to create a tar archive until one works. ++_am_tools='gnutar m4_if([$1], [ustar], [plaintar]) pax cpio none' ++_am_tools=${am_cv_prog_tar_$1-$_am_tools} ++# Do not fold the above two line into one, because Tru64 sh and ++# Solaris sh will not grok spaces in the rhs of `-'. ++for _am_tool in $_am_tools ++do ++ case $_am_tool in ++ gnutar) ++ for _am_tar in tar gnutar gtar; ++ do ++ AM_RUN_LOG([$_am_tar --version]) && break ++ done ++ am__tar="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$$tardir"' ++ am__tar_="$_am_tar --format=m4_if([$1], [pax], [posix], [$1]) -chf - "'"$tardir"' ++ am__untar="$_am_tar -xf -" ++ ;; ++ plaintar) ++ # Must skip GNU tar: if it does not support --format= it doesn't create ++ # ustar tarball either. ++ (tar --version) >/dev/null 2>&1 && continue ++ am__tar='tar chf - "$$tardir"' ++ am__tar_='tar chf - "$tardir"' ++ am__untar='tar xf -' ++ ;; ++ pax) ++ am__tar='pax -L -x $1 -w "$$tardir"' ++ am__tar_='pax -L -x $1 -w "$tardir"' ++ am__untar='pax -r' ++ ;; ++ cpio) ++ am__tar='find "$$tardir" -print | cpio -o -H $1 -L' ++ am__tar_='find "$tardir" -print | cpio -o -H $1 -L' ++ am__untar='cpio -i -H $1 -d' ++ ;; ++ none) ++ am__tar=false ++ am__tar_=false ++ am__untar=false ++ ;; ++ esac ++ ++ # If the value was cached, stop now. We just wanted to have am__tar ++ # and am__untar set. ++ test -n "${am_cv_prog_tar_$1}" && break ++ ++ # tar/untar a dummy directory, and stop if the command works ++ rm -rf conftest.dir ++ mkdir conftest.dir ++ echo GrepMe > conftest.dir/file ++ AM_RUN_LOG([tardir=conftest.dir && eval $am__tar_ >conftest.tar]) ++ rm -rf conftest.dir ++ if test -s conftest.tar; then ++ AM_RUN_LOG([$am__untar /dev/null 2>&1 && break ++ fi ++done ++rm -rf conftest.dir ++ ++AC_CACHE_VAL([am_cv_prog_tar_$1], [am_cv_prog_tar_$1=$_am_tool]) ++AC_MSG_RESULT([$am_cv_prog_tar_$1])]) ++AC_SUBST([am__tar]) ++AC_SUBST([am__untar]) ++]) # _AM_PROG_TAR ++ +Index: linux-atm-2.4.1/configure +=================================================================== +--- linux-atm-2.4.1.orig/configure 2007-10-20 21:45:35.770870894 +0200 ++++ linux-atm-2.4.1/configure 2007-10-20 21:45:44.283355992 +0200 +@@ -1,25 +1,54 @@ + #! /bin/sh + # Guess values for system-dependent variables and create Makefiles. +-# Generated by GNU Autoconf 2.59. ++# Generated by GNU Autoconf 2.61. + # +-# Copyright (C) 2003 Free Software Foundation, Inc. ++# Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, ++# 2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. + # This configure script is free software; the Free Software Foundation + # gives unlimited permission to copy, distribute and modify it. + ## --------------------- ## + ## M4sh Initialization. ## + ## --------------------- ## + +-# Be Bourne compatible ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then +- set -o posix ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++ ++ ++# PATH needs CR ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh + fi +-DUALCASE=1; export DUALCASE # for MKS sh + + # Support unset when possible. + if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then +@@ -29,8 +58,43 @@ + fi + + ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++as_nl=' ++' ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++case $0 in ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ { (exit 1); exit 1; } ++fi ++ + # Work around bugs in pre-3.0 UWIN ksh. +-$as_unset ENV MAIL MAILPATH ++for as_var in ENV MAIL MAILPATH ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++done + PS1='$ ' + PS2='> ' + PS4='+ ' +@@ -44,18 +108,19 @@ + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else +- $as_unset $as_var ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + fi + done + + # Required to use basename. +-if expr a : '\(a\)' >/dev/null 2>&1; then ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + +-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename + else + as_basename=false +@@ -63,157 +128,388 @@ + + + # Name of the executable. +-as_me=`$as_basename "$0" || ++as_me=`$as_basename -- "$0" || + $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ +- X"$0" : 'X\(/\)$' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || + echo X/"$0" | +- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } +- /^X\/\(\/\/\)$/{ s//\1/; q; } +- /^X\/\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + ++# CDPATH. ++$as_unset CDPATH + +-# PATH needs CR, and LINENO needs CR and PATH. +-# Avoid depending upon Character Ranges. +-as_cr_letters='abcdefghijklmnopqrstuvwxyz' +-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +-as_cr_Letters=$as_cr_letters$as_cr_LETTERS +-as_cr_digits='0123456789' +-as_cr_alnum=$as_cr_Letters$as_cr_digits + +-# The user is always right. +-if test "${PATH_SEPARATOR+set}" != set; then +- echo "#! /bin/sh" >conf$$.sh +- echo "exit 0" >>conf$$.sh +- chmod +x conf$$.sh +- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then +- PATH_SEPARATOR=';' +- else +- PATH_SEPARATOR=: +- fi +- rm -f conf$$.sh ++if test "x$CONFIG_SHELL" = x; then ++ if (eval ":") 2>/dev/null; then ++ as_have_required=yes ++else ++ as_have_required=no ++fi ++ ++ if test $as_have_required = yes && (eval ": ++(as_func_return () { ++ (exit \$1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. + fi + ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi + +- as_lineno_1=$LINENO +- as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` +- test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" || { +- # Find who we are. Look in the path if we contain no path at all +- # relative or not. +- case $0 in +- *[\\/]* ) as_myself=$0 ;; +- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +-done ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi + +- ;; +- esac +- # We did not find ourselves, most probably we were run as `sh COMMAND' +- # in which case we are not to be found in the path. +- if test "x$as_myself" = x; then +- as_myself=$0 +- fi +- if test ! -f "$as_myself"; then +- { echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2 +- { (exit 1); exit 1; }; } +- fi +- case $CONFIG_SHELL in +- '') ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test \$exitcode = 0) || { (exit 1); exit 1; } ++ ++( ++ as_lineno_1=\$LINENO ++ as_lineno_2=\$LINENO ++ test \"x\$as_lineno_1\" != \"x\$as_lineno_2\" && ++ test \"x\`expr \$as_lineno_1 + 1\`\" = \"x\$as_lineno_2\") || { (exit 1); exit 1; } ++") 2> /dev/null; then ++ : ++else ++ as_candidate_shells= + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH + do + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. +- for as_base in sh bash ksh sh5; do +- case $as_dir in ++ case $as_dir in + /*) +- if ("$as_dir/$as_base" -c ' ++ for as_base in sh bash ksh sh5; do ++ as_candidate_shells="$as_candidate_shells $as_dir/$as_base" ++ done;; ++ esac ++done ++IFS=$as_save_IFS ++ ++ ++ for as_shell in $as_candidate_shells $SHELL; do ++ # Try only shells that exist, to save several forks. ++ if { test -f "$as_shell" || test -f "$as_shell.exe"; } && ++ { ("$as_shell") 2> /dev/null <<\_ASEOF ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++: ++_ASEOF ++}; then ++ CONFIG_SHELL=$as_shell ++ as_have_required=yes ++ if { "$as_shell" 2> /dev/null <<\_ASEOF ++if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then ++ emulate sh ++ NULLCMD=: ++ # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which ++ # is contrary to our usage. Disable this feature. ++ alias -g '${1+"$@"}'='"$@"' ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++: ++(as_func_return () { ++ (exit $1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi ++ ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = "$1" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test $exitcode = 0) || { (exit 1); exit 1; } ++ ++( + as_lineno_1=$LINENO + as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then +- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } +- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } +- CONFIG_SHELL=$as_dir/$as_base +- export CONFIG_SHELL +- exec "$CONFIG_SHELL" "$0" ${1+"$@"} +- fi;; +- esac +- done +-done +-;; +- esac ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2") || { (exit 1); exit 1; } ++ ++_ASEOF ++}; then ++ break ++fi ++ ++fi ++ ++ done ++ ++ if test "x$CONFIG_SHELL" != x; then ++ for as_var in BASH_ENV ENV ++ do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++ done ++ export CONFIG_SHELL ++ exec "$CONFIG_SHELL" "$as_myself" ${1+"$@"} ++fi ++ ++ ++ if test $as_have_required = no; then ++ echo This script requires a shell more modern than all the ++ echo shells that I found on your system. Please install a ++ echo modern shell, or manually run the script under such a ++ echo shell if you do have one. ++ { (exit 1); exit 1; } ++fi ++ ++ ++fi ++ ++fi ++ ++ ++ ++(eval "as_func_return () { ++ (exit \$1) ++} ++as_func_success () { ++ as_func_return 0 ++} ++as_func_failure () { ++ as_func_return 1 ++} ++as_func_ret_success () { ++ return 0 ++} ++as_func_ret_failure () { ++ return 1 ++} ++ ++exitcode=0 ++if as_func_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_success failed. ++fi ++ ++if as_func_failure; then ++ exitcode=1 ++ echo as_func_failure succeeded. ++fi ++ ++if as_func_ret_success; then ++ : ++else ++ exitcode=1 ++ echo as_func_ret_success failed. ++fi ++ ++if as_func_ret_failure; then ++ exitcode=1 ++ echo as_func_ret_failure succeeded. ++fi ++ ++if ( set x; as_func_ret_success y && test x = \"\$1\" ); then ++ : ++else ++ exitcode=1 ++ echo positional parameters were not saved. ++fi ++ ++test \$exitcode = 0") || { ++ echo No shell found that supports shell functions. ++ echo Please tell autoconf@gnu.org about your system, ++ echo including any error possibly output before this ++ echo message ++} ++ ++ ++ ++ as_lineno_1=$LINENO ++ as_lineno_2=$LINENO ++ test "x$as_lineno_1" != "x$as_lineno_2" && ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a +- # line-number line before each line; the second 'sed' does the real +- # work. The second script uses 'N' to pair each line-number line +- # with the numbered line, and appends trailing '-' during +- # substitution so that $LINENO is not a special case at line end. ++ # line-number line after each line using $LINENO; the second 'sed' ++ # does the real work. The second script uses 'N' to pair each ++ # line-number line with the line containing $LINENO, and appends ++ # trailing '-' during substitution so that $LINENO is not a special ++ # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the +- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) +- sed '=' <$as_myself | ++ # scripts with optimization help from Paolo Bonzini. Blame Lee ++ # E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | + sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno + N +- s,$,-, +- : loop +- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop +- s,-$,, +- s,^['$as_cr_digits']*\n,, ++ s/-\n.*// + ' >$as_me.lineno && +- chmod +x $as_me.lineno || ++ chmod +x "$as_me.lineno" || + { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the +- # original and so on. Autoconf is especially sensible to this). +- . ./$as_me.lineno ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" + # Exit status is that of the last command. + exit + } + + +-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in +- *c*,-n*) ECHO_N= ECHO_C=' +-' ECHO_T=' ' ;; +- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; +- *) ECHO_N= ECHO_C='\c' ECHO_T= ;; ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi ++ ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in ++-n*) ++ case `echo 'x\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ *) ECHO_C='\c';; ++ esac;; ++*) ++ ECHO_N='-n';; + esac + +-if expr a : '\(a\)' >/dev/null 2>&1; then ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + + rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir ++fi + echo >conf$$.file + if ln -s conf$$.file conf$$ 2>/dev/null; then +- # We could just check for DJGPP; but this test a) works b) is more generic +- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). +- if test -f conf$$.exe; then +- # Don't use ln at all; we don't have any links ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' +- else +- as_ln_s='ln -s' +- fi + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +-rm -f conf$$ conf$$.exe conf$$.file ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null + + if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +@@ -222,7 +518,28 @@ + as_mkdir_p=false + fi + +-as_executable_p="test -f" ++if test -x / >/dev/null 2>&1; then ++ as_test_x='test -x' ++else ++ if ls -dL / >/dev/null 2>&1; then ++ as_ls_L_option=L ++ else ++ as_ls_L_option= ++ fi ++ as_test_x=' ++ eval sh -c '\'' ++ if test -d "$1"; then ++ test -d "$1/."; ++ else ++ case $1 in ++ -*)set "./$1";; ++ esac; ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ++ ???[sx]*):;;*)false;;esac;fi ++ '\'' sh ++ ' ++fi ++as_executable_p=$as_test_x + + # Sed expression to map a string onto a valid CPP name. + as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" +@@ -231,26 +548,6 @@ + as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +-# IFS +-# We need space, tab and new line, in precisely that order. +-as_nl=' +-' +-IFS=" $as_nl" +- +-# CDPATH. +-$as_unset CDPATH +- +- +-# Find the correct PATH separator. Usually this is `:', but +-# DJGPP uses `;' like DOS. +-if test "X${PATH_SEPARATOR+set}" != Xset; then +- UNAME=${UNAME-`uname 2>/dev/null`} +- case X$UNAME in +- *-DOS) lt_cv_sys_path_separator=';' ;; +- *) lt_cv_sys_path_separator=':' ;; +- esac +- PATH_SEPARATOR=$lt_cv_sys_path_separator +-fi + + + # Check that we are running under the correct shell. +@@ -270,7 +567,7 @@ + elif test "X$1" = X--fallback-echo; then + # Avoid inline document here, it may be left over + : +-elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then ++elif test "X`($echo '\t') 2>/dev/null`" = 'X\t' ; then + # Yippee, $echo works! + : + else +@@ -282,22 +579,22 @@ + # used as fallback echo + shift + cat </dev/null 2>&1 && unset CDPATH + + if test -z "$ECHO"; then + if test "X${echo_test_string+set}" != Xset; then + # find a string as large as possible, as long as the shell can cope with it + for cmd in 'sed 50q "$0"' 'sed 20q "$0"' 'sed 10q "$0"' 'sed 2q "$0"' 'echo test'; do + # expected sizes: less than 2Kb, 1Kb, 512 bytes, 16 bytes, ... +- if (echo_test_string="`eval $cmd`") 2>/dev/null && +- echo_test_string="`eval $cmd`" && ++ if (echo_test_string=`eval $cmd`) 2>/dev/null && ++ echo_test_string=`eval $cmd` && + (test "X$echo_test_string" = "X$echo_test_string") 2>/dev/null + then + break +@@ -316,8 +613,9 @@ + # + # So, first we look for a working echo in the user's PATH. + +- IFS="${IFS= }"; save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for dir in $PATH /usr/ucb; do ++ IFS="$lt_save_ifs" + if (test -f $dir/echo || test -f $dir/echo$ac_exeext) && + test "X`($dir/echo '\t') 2>/dev/null`" = 'X\t' && + echo_testing_string=`($dir/echo "$echo_test_string") 2>/dev/null` && +@@ -326,7 +624,7 @@ + break + fi + done +- IFS="$save_ifs" ++ IFS="$lt_save_ifs" + + if test "X$echo" = Xecho; then + # We didn't find a better echo, so look for alternatives. +@@ -400,29 +698,31 @@ + + + ++ ++tagnames=${tagnames+${tagnames},}CXX ++ ++tagnames=${tagnames+${tagnames},}F77 ++ ++exec 7<&0 &1 ++ + # Name of the host. + # hostname on some systems (SVR3.2, Linux) returns a bogus exit status, + # so uname gets run too. + ac_hostname=`(hostname || uname -n) 2>/dev/null | sed 1q` + +-exec 6>&1 +- + # + # Initializations. + # + ac_default_prefix=/usr/local ++ac_clean_files= + ac_config_libobj_dir=. ++LIBOBJS= + cross_compiling=no + subdirs= + MFLAGS= + MAKEFLAGS= + SHELL=${CONFIG_SHELL-/bin/sh} + +-# Maximum number of lines to put in a shell here document. +-# This variable seems obsolete. It should probably be removed, and +-# only ac_max_sed_lines should be used. +-: ${ac_max_here_lines=38} +- + # Identity of this package. + PACKAGE_NAME= + PACKAGE_TARNAME= +@@ -434,42 +734,174 @@ + # Factoring default headers for most tests. + ac_includes_default="\ + #include +-#if HAVE_SYS_TYPES_H ++#ifdef HAVE_SYS_TYPES_H + # include + #endif +-#if HAVE_SYS_STAT_H ++#ifdef HAVE_SYS_STAT_H + # include + #endif +-#if STDC_HEADERS ++#ifdef STDC_HEADERS + # include + # include + #else +-# if HAVE_STDLIB_H ++# ifdef HAVE_STDLIB_H + # include + # endif + #endif +-#if HAVE_STRING_H +-# if !STDC_HEADERS && HAVE_MEMORY_H ++#ifdef HAVE_STRING_H ++# if !defined STDC_HEADERS && defined HAVE_MEMORY_H + # include + # endif + # include + #endif +-#if HAVE_STRINGS_H ++#ifdef HAVE_STRINGS_H + # include + #endif +-#if HAVE_INTTYPES_H ++#ifdef HAVE_INTTYPES_H + # include +-#else +-# if HAVE_STDINT_H +-# include +-# endif + #endif +-#if HAVE_UNISTD_H ++#ifdef HAVE_STDINT_H ++# include ++#endif ++#ifdef HAVE_UNISTD_H + # include + #endif" + +-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA PACKAGE VERSION ACLOCAL AUTOCONF AUTOMAKE AUTOHEADER MAKEINFO SET_MAKE LIBVER_CURRENT LIBVER_REVISION LIBVER_AGE CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT LEX LEXLIB LEX_OUTPUT_ROOT YACC LN_S ECHO RANLIB ac_ct_RANLIB STRIP ac_ct_STRIP CPP EGREP LIBTOOL LIBTOOL_DEPS PERL LIBOBJS LTLIBOBJS' ++ac_subst_vars='SHELL ++PATH_SEPARATOR ++PACKAGE_NAME ++PACKAGE_TARNAME ++PACKAGE_VERSION ++PACKAGE_STRING ++PACKAGE_BUGREPORT ++exec_prefix ++prefix ++program_transform_name ++bindir ++sbindir ++libexecdir ++datarootdir ++datadir ++sysconfdir ++sharedstatedir ++localstatedir ++includedir ++oldincludedir ++docdir ++infodir ++htmldir ++dvidir ++pdfdir ++psdir ++libdir ++localedir ++mandir ++DEFS ++ECHO_C ++ECHO_N ++ECHO_T ++LIBS ++build_alias ++host_alias ++target_alias ++build ++build_cpu ++build_vendor ++build_os ++host ++host_cpu ++host_vendor ++host_os ++target ++target_cpu ++target_vendor ++target_os ++INSTALL_PROGRAM ++INSTALL_SCRIPT ++INSTALL_DATA ++CYGPATH_W ++PACKAGE ++VERSION ++ACLOCAL ++AUTOCONF ++AUTOMAKE ++AUTOHEADER ++MAKEINFO ++install_sh ++STRIP ++INSTALL_STRIP_PROGRAM ++mkdir_p ++AWK ++SET_MAKE ++am__leading_dot ++AMTAR ++am__tar ++am__untar ++LIBVER_CURRENT ++LIBVER_REVISION ++LIBVER_AGE ++CC ++CFLAGS ++LDFLAGS ++CPPFLAGS ++ac_ct_CC ++EXEEXT ++OBJEXT ++DEPDIR ++am__include ++am__quote ++AMDEP_TRUE ++AMDEP_FALSE ++AMDEPBACKSLASH ++CCDEPMODE ++am__fastdepCC_TRUE ++am__fastdepCC_FALSE ++LEX ++LEX_OUTPUT_ROOT ++LEXLIB ++YACC ++YFLAGS ++GREP ++EGREP ++LN_S ++ECHO ++AR ++RANLIB ++CPP ++CXX ++CXXFLAGS ++ac_ct_CXX ++CXXDEPMODE ++am__fastdepCXX_TRUE ++am__fastdepCXX_FALSE ++CXXCPP ++F77 ++FFLAGS ++ac_ct_F77 ++LIBTOOL ++LIBTOOL_DEPS ++PERL ++LIBOBJS ++LTLIBOBJS' + ac_subst_files='' ++ ac_precious_vars='build_alias ++host_alias ++target_alias ++CC ++CFLAGS ++LDFLAGS ++LIBS ++CPPFLAGS ++YACC ++YFLAGS ++CPP ++CXX ++CXXFLAGS ++CCC ++CXXCPP ++F77 ++FFLAGS' ++ + + # Initialize some variables set by options. + ac_init_help= +@@ -496,34 +928,48 @@ + # and all the variables that are supposed to be based on exec_prefix + # by default will actually change. + # Use braces instead of parens because sh, perl, etc. also accept them. ++# (The list follows the same order as the GNU Coding Standards.) + bindir='${exec_prefix}/bin' + sbindir='${exec_prefix}/sbin' + libexecdir='${exec_prefix}/libexec' +-datadir='${prefix}/share' ++datarootdir='${prefix}/share' ++datadir='${datarootdir}' + sysconfdir='${prefix}/etc' + sharedstatedir='${prefix}/com' + localstatedir='${prefix}/var' +-libdir='${exec_prefix}/lib' + includedir='${prefix}/include' + oldincludedir='/usr/include' +-infodir='${prefix}/info' +-mandir='${prefix}/man' ++docdir='${datarootdir}/doc/${PACKAGE}' ++infodir='${datarootdir}/info' ++htmldir='${docdir}' ++dvidir='${docdir}' ++pdfdir='${docdir}' ++psdir='${docdir}' ++libdir='${exec_prefix}/lib' ++localedir='${datarootdir}/locale' ++mandir='${datarootdir}/man' + + ac_prev= ++ac_dashdash= + for ac_option + do + # If the previous option needs an argument, assign it. + if test -n "$ac_prev"; then +- eval "$ac_prev=\$ac_option" ++ eval $ac_prev=\$ac_option + ac_prev= + continue + fi + +- ac_optarg=`expr "x$ac_option" : 'x[^=]*=\(.*\)'` ++ case $ac_option in ++ *=*) ac_optarg=`expr "X$ac_option" : '[^=]*=\(.*\)'` ;; ++ *) ac_optarg=yes ;; ++ esac + + # Accept the important Cygnus configure options, so we can diagnose typos. + +- case $ac_option in ++ case $ac_dashdash$ac_option in ++ --) ++ ac_dashdash=yes ;; + + -bindir | --bindir | --bindi | --bind | --bin | --bi) + ac_prev=bindir ;; +@@ -545,33 +991,45 @@ + --config-cache | -C) + cache_file=config.cache ;; + +- -datadir | --datadir | --datadi | --datad | --data | --dat | --da) ++ -datadir | --datadir | --datadi | --datad) + ac_prev=datadir ;; +- -datadir=* | --datadir=* | --datadi=* | --datad=* | --data=* | --dat=* \ +- | --da=*) ++ -datadir=* | --datadir=* | --datadi=* | --datad=*) + datadir=$ac_optarg ;; + ++ -datarootdir | --datarootdir | --datarootdi | --datarootd | --dataroot \ ++ | --dataroo | --dataro | --datar) ++ ac_prev=datarootdir ;; ++ -datarootdir=* | --datarootdir=* | --datarootdi=* | --datarootd=* \ ++ | --dataroot=* | --dataroo=* | --dataro=* | --datar=*) ++ datarootdir=$ac_optarg ;; ++ + -disable-* | --disable-*) + ac_feature=`expr "x$ac_option" : 'x-*disable-\(.*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } +- ac_feature=`echo $ac_feature | sed 's/-/_/g'` +- eval "enable_$ac_feature=no" ;; ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` ++ eval enable_$ac_feature=no ;; ++ ++ -docdir | --docdir | --docdi | --doc | --do) ++ ac_prev=docdir ;; ++ -docdir=* | --docdir=* | --docdi=* | --doc=* | --do=*) ++ docdir=$ac_optarg ;; ++ ++ -dvidir | --dvidir | --dvidi | --dvid | --dvi | --dv) ++ ac_prev=dvidir ;; ++ -dvidir=* | --dvidir=* | --dvidi=* | --dvid=* | --dvi=* | --dv=*) ++ dvidir=$ac_optarg ;; + + -enable-* | --enable-*) + ac_feature=`expr "x$ac_option" : 'x-*enable-\([^=]*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_feature" : ".*[^-_$as_cr_alnum]" >/dev/null && ++ expr "x$ac_feature" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid feature name: $ac_feature" >&2 + { (exit 1); exit 1; }; } +- ac_feature=`echo $ac_feature | sed 's/-/_/g'` +- case $ac_option in +- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; +- *) ac_optarg=yes ;; +- esac +- eval "enable_$ac_feature='$ac_optarg'" ;; ++ ac_feature=`echo $ac_feature | sed 's/[-.]/_/g'` ++ eval enable_$ac_feature=\$ac_optarg ;; + + -exec-prefix | --exec_prefix | --exec-prefix | --exec-prefi \ + | --exec-pref | --exec-pre | --exec-pr | --exec-p | --exec- \ +@@ -598,6 +1056,12 @@ + -host=* | --host=* | --hos=* | --ho=*) + host_alias=$ac_optarg ;; + ++ -htmldir | --htmldir | --htmldi | --htmld | --html | --htm | --ht) ++ ac_prev=htmldir ;; ++ -htmldir=* | --htmldir=* | --htmldi=* | --htmld=* | --html=* | --htm=* \ ++ | --ht=*) ++ htmldir=$ac_optarg ;; ++ + -includedir | --includedir | --includedi | --included | --include \ + | --includ | --inclu | --incl | --inc) + ac_prev=includedir ;; +@@ -622,13 +1086,16 @@ + | --libexe=* | --libex=* | --libe=*) + libexecdir=$ac_optarg ;; + ++ -localedir | --localedir | --localedi | --localed | --locale) ++ ac_prev=localedir ;; ++ -localedir=* | --localedir=* | --localedi=* | --localed=* | --locale=*) ++ localedir=$ac_optarg ;; ++ + -localstatedir | --localstatedir | --localstatedi | --localstated \ +- | --localstate | --localstat | --localsta | --localst \ +- | --locals | --local | --loca | --loc | --lo) ++ | --localstate | --localstat | --localsta | --localst | --locals) + ac_prev=localstatedir ;; + -localstatedir=* | --localstatedir=* | --localstatedi=* | --localstated=* \ +- | --localstate=* | --localstat=* | --localsta=* | --localst=* \ +- | --locals=* | --local=* | --loca=* | --loc=* | --lo=*) ++ | --localstate=* | --localstat=* | --localsta=* | --localst=* | --locals=*) + localstatedir=$ac_optarg ;; + + -mandir | --mandir | --mandi | --mand | --man | --ma | --m) +@@ -693,6 +1160,16 @@ + | --progr-tra=* | --program-tr=* | --program-t=*) + program_transform_name=$ac_optarg ;; + ++ -pdfdir | --pdfdir | --pdfdi | --pdfd | --pdf | --pd) ++ ac_prev=pdfdir ;; ++ -pdfdir=* | --pdfdir=* | --pdfdi=* | --pdfd=* | --pdf=* | --pd=*) ++ pdfdir=$ac_optarg ;; ++ ++ -psdir | --psdir | --psdi | --psd | --ps) ++ ac_prev=psdir ;; ++ -psdir=* | --psdir=* | --psdi=* | --psd=* | --ps=*) ++ psdir=$ac_optarg ;; ++ + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + silent=yes ;; +@@ -745,24 +1222,20 @@ + -with-* | --with-*) + ac_package=`expr "x$ac_option" : 'x-*with-\([^=]*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } +- ac_package=`echo $ac_package| sed 's/-/_/g'` +- case $ac_option in +- *=*) ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"`;; +- *) ac_optarg=yes ;; +- esac +- eval "with_$ac_package='$ac_optarg'" ;; ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` ++ eval with_$ac_package=\$ac_optarg ;; + + -without-* | --without-*) + ac_package=`expr "x$ac_option" : 'x-*without-\(.*\)'` + # Reject names that are not valid shell variable names. +- expr "x$ac_package" : ".*[^-_$as_cr_alnum]" >/dev/null && ++ expr "x$ac_package" : ".*[^-._$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid package name: $ac_package" >&2 + { (exit 1); exit 1; }; } +- ac_package=`echo $ac_package | sed 's/-/_/g'` +- eval "with_$ac_package=no" ;; ++ ac_package=`echo $ac_package | sed 's/[-.]/_/g'` ++ eval with_$ac_package=no ;; + + --x) + # Obsolete; use --with-x. +@@ -793,8 +1266,7 @@ + expr "x$ac_envvar" : ".*[^_$as_cr_alnum]" >/dev/null && + { echo "$as_me: error: invalid variable name: $ac_envvar" >&2 + { (exit 1); exit 1; }; } +- ac_optarg=`echo "$ac_optarg" | sed "s/'/'\\\\\\\\''/g"` +- eval "$ac_envvar='$ac_optarg'" ++ eval $ac_envvar=\$ac_optarg + export $ac_envvar ;; + + *) +@@ -814,27 +1286,19 @@ + { (exit 1); exit 1; }; } + fi + +-# Be sure to have absolute paths. +-for ac_var in exec_prefix prefix ++# Be sure to have absolute directory names. ++for ac_var in exec_prefix prefix bindir sbindir libexecdir datarootdir \ ++ datadir sysconfdir sharedstatedir localstatedir includedir \ ++ oldincludedir docdir infodir htmldir dvidir pdfdir psdir \ ++ libdir localedir mandir + do +- eval ac_val=$`echo $ac_var` ++ eval ac_val=\$$ac_var + case $ac_val in +- [\\/$]* | ?:[\\/]* | NONE | '' ) ;; +- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 +- { (exit 1); exit 1; }; };; +- esac +-done +- +-# Be sure to have absolute paths. +-for ac_var in bindir sbindir libexecdir datadir sysconfdir sharedstatedir \ +- localstatedir libdir includedir oldincludedir infodir mandir +-do +- eval ac_val=$`echo $ac_var` +- case $ac_val in +- [\\/$]* | ?:[\\/]* ) ;; +- *) { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 +- { (exit 1); exit 1; }; };; ++ [\\/$]* | ?:[\\/]* ) continue;; ++ NONE | '' ) case $ac_var in *prefix ) continue;; esac;; + esac ++ { echo "$as_me: error: expected an absolute directory name for --$ac_var: $ac_val" >&2 ++ { (exit 1); exit 1; }; } + done + + # There might be people who depend on the old broken behavior: `$host' +@@ -861,74 +1325,76 @@ + test "$silent" = yes && exec 6>/dev/null + + ++ac_pwd=`pwd` && test -n "$ac_pwd" && ++ac_ls_di=`ls -di .` && ++ac_pwd_ls_di=`cd "$ac_pwd" && ls -di .` || ++ { echo "$as_me: error: Working directory cannot be determined" >&2 ++ { (exit 1); exit 1; }; } ++test "X$ac_ls_di" = "X$ac_pwd_ls_di" || ++ { echo "$as_me: error: pwd does not report name of working directory" >&2 ++ { (exit 1); exit 1; }; } ++ ++ + # Find the source files, if location was not specified. + if test -z "$srcdir"; then + ac_srcdir_defaulted=yes +- # Try the directory containing this script, then its parent. +- ac_confdir=`(dirname "$0") 2>/dev/null || ++ # Try the directory containing this script, then the parent directory. ++ ac_confdir=`$as_dirname -- "$0" || + $as_expr X"$0" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$0" : 'X\(//\)[^/]' \| \ + X"$0" : 'X\(//\)$' \| \ +- X"$0" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || + echo X"$0" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + srcdir=$ac_confdir +- if test ! -r $srcdir/$ac_unique_file; then ++ if test ! -r "$srcdir/$ac_unique_file"; then + srcdir=.. + fi + else + ac_srcdir_defaulted=no + fi +-if test ! -r $srcdir/$ac_unique_file; then +- if test "$ac_srcdir_defaulted" = yes; then +- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $ac_confdir or .." >&2 +- { (exit 1); exit 1; }; } +- else +- { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 ++if test ! -r "$srcdir/$ac_unique_file"; then ++ test "$ac_srcdir_defaulted" = yes && srcdir="$ac_confdir or .." ++ { echo "$as_me: error: cannot find sources ($ac_unique_file) in $srcdir" >&2 + { (exit 1); exit 1; }; } +- fi + fi +-(cd $srcdir && test -r ./$ac_unique_file) 2>/dev/null || +- { echo "$as_me: error: sources are in $srcdir, but \`cd $srcdir' does not work" >&2 +- { (exit 1); exit 1; }; } +-srcdir=`echo "$srcdir" | sed 's%\([^\\/]\)[\\/]*$%\1%'` +-ac_env_build_alias_set=${build_alias+set} +-ac_env_build_alias_value=$build_alias +-ac_cv_env_build_alias_set=${build_alias+set} +-ac_cv_env_build_alias_value=$build_alias +-ac_env_host_alias_set=${host_alias+set} +-ac_env_host_alias_value=$host_alias +-ac_cv_env_host_alias_set=${host_alias+set} +-ac_cv_env_host_alias_value=$host_alias +-ac_env_target_alias_set=${target_alias+set} +-ac_env_target_alias_value=$target_alias +-ac_cv_env_target_alias_set=${target_alias+set} +-ac_cv_env_target_alias_value=$target_alias +-ac_env_CC_set=${CC+set} +-ac_env_CC_value=$CC +-ac_cv_env_CC_set=${CC+set} +-ac_cv_env_CC_value=$CC +-ac_env_CFLAGS_set=${CFLAGS+set} +-ac_env_CFLAGS_value=$CFLAGS +-ac_cv_env_CFLAGS_set=${CFLAGS+set} +-ac_cv_env_CFLAGS_value=$CFLAGS +-ac_env_LDFLAGS_set=${LDFLAGS+set} +-ac_env_LDFLAGS_value=$LDFLAGS +-ac_cv_env_LDFLAGS_set=${LDFLAGS+set} +-ac_cv_env_LDFLAGS_value=$LDFLAGS +-ac_env_CPPFLAGS_set=${CPPFLAGS+set} +-ac_env_CPPFLAGS_value=$CPPFLAGS +-ac_cv_env_CPPFLAGS_set=${CPPFLAGS+set} +-ac_cv_env_CPPFLAGS_value=$CPPFLAGS +-ac_env_CPP_set=${CPP+set} +-ac_env_CPP_value=$CPP +-ac_cv_env_CPP_set=${CPP+set} +-ac_cv_env_CPP_value=$CPP ++ac_msg="sources are in $srcdir, but \`cd $srcdir' does not work" ++ac_abs_confdir=`( ++ cd "$srcdir" && test -r "./$ac_unique_file" || { echo "$as_me: error: $ac_msg" >&2 ++ { (exit 1); exit 1; }; } ++ pwd)` ++# When building in place, set srcdir=. ++if test "$ac_abs_confdir" = "$ac_pwd"; then ++ srcdir=. ++fi ++# Remove unnecessary trailing slashes from srcdir. ++# Double slashes in file names in object file debugging info ++# mess up M-x gdb in Emacs. ++case $srcdir in ++*/) srcdir=`expr "X$srcdir" : 'X\(.*[^/]\)' \| "X$srcdir" : 'X\(.*\)'`;; ++esac ++for ac_var in $ac_precious_vars; do ++ eval ac_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_env_${ac_var}_value=\$${ac_var} ++ eval ac_cv_env_${ac_var}_set=\${${ac_var}+set} ++ eval ac_cv_env_${ac_var}_value=\$${ac_var} ++done + + # + # Report the --help message. +@@ -957,9 +1423,6 @@ + -n, --no-create do not create output files + --srcdir=DIR find the sources in DIR [configure dir or \`..'] + +-_ACEOF +- +- cat <<_ACEOF + Installation directories: + --prefix=PREFIX install architecture-independent files in PREFIX + [$ac_default_prefix] +@@ -977,15 +1440,22 @@ + --bindir=DIR user executables [EPREFIX/bin] + --sbindir=DIR system admin executables [EPREFIX/sbin] + --libexecdir=DIR program executables [EPREFIX/libexec] +- --datadir=DIR read-only architecture-independent data [PREFIX/share] + --sysconfdir=DIR read-only single-machine data [PREFIX/etc] + --sharedstatedir=DIR modifiable architecture-independent data [PREFIX/com] + --localstatedir=DIR modifiable single-machine data [PREFIX/var] + --libdir=DIR object code libraries [EPREFIX/lib] + --includedir=DIR C header files [PREFIX/include] + --oldincludedir=DIR C header files for non-gcc [/usr/include] +- --infodir=DIR info documentation [PREFIX/info] +- --mandir=DIR man documentation [PREFIX/man] ++ --datarootdir=DIR read-only arch.-independent data root [PREFIX/share] ++ --datadir=DIR read-only architecture-independent data [DATAROOTDIR] ++ --infodir=DIR info documentation [DATAROOTDIR/info] ++ --localedir=DIR locale-dependent data [DATAROOTDIR/locale] ++ --mandir=DIR man documentation [DATAROOTDIR/man] ++ --docdir=DIR documentation root [DATAROOTDIR/doc/PACKAGE] ++ --htmldir=DIR html documentation [DOCDIR] ++ --dvidir=DIR dvi documentation [DOCDIR] ++ --pdfdir=DIR pdf documentation [DOCDIR] ++ --psdir=DIR ps documentation [DOCDIR] + _ACEOF + + cat <<\_ACEOF +@@ -1009,9 +1479,12 @@ + Optional Features: + --disable-FEATURE do not include FEATURE (same as --enable-FEATURE=no) + --enable-FEATURE[=ARG] include FEATURE [ARG=yes] +- --enable-shared=PKGS build shared libraries default=yes +- --enable-static=PKGS build static libraries default=yes +- --enable-fast-install=PKGS optimize for fast installation default=yes ++ --disable-dependency-tracking speeds up one-time build ++ --enable-dependency-tracking do not reject slow dependency extractors ++ --enable-shared[=PKGS] build shared libraries [default=yes] ++ --enable-static[=PKGS] build static libraries [default=yes] ++ --enable-fast-install[=PKGS] ++ optimize for fast installation [default=yes] + --disable-libtool-lock avoid locking (might break parallel builds) + --enable-allow_uni30 Allow UNI 3.0 backwards-compatible extensions (if using UNI 3.1) + --enable-q2963_1 Enable peak cell rate modification as specified in Q.2963.1 (if using UNI 4.0) +@@ -1023,8 +1496,10 @@ + Optional Packages: + --with-PACKAGE[=ARG] use PACKAGE [ARG=yes] + --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no) +- --with-gnu-ld assume the C compiler uses GNU ld default=no +- --with-pic try to use only PIC/non-PIC objects default=use both ++ --with-gnu-ld assume the C compiler uses GNU ld [default=no] ++ --with-pic try to use only PIC/non-PIC objects [default=use ++ both] ++ --with-tags[=TAGS] include additional configurations [automatic] + --with-uni=VERSION UNI version to use (3.0,3.1,4.0) default=dynamic + + Some influential environment variables: +@@ -1032,126 +1507,105 @@ + CFLAGS C compiler flags + LDFLAGS linker flags, e.g. -L if you have libraries in a + nonstandard directory +- CPPFLAGS C/C++ preprocessor flags, e.g. -I if you have +- headers in a nonstandard directory ++ LIBS libraries to pass to the linker, e.g. -l ++ CPPFLAGS C/C++/Objective C preprocessor flags, e.g. -I if ++ you have headers in a nonstandard directory ++ YACC The `Yet Another C Compiler' implementation to use. Defaults to ++ the first program found out of: `bison -y', `byacc', `yacc'. ++ YFLAGS The list of arguments that will be passed by default to $YACC. ++ This script will default YFLAGS to the empty string to avoid a ++ default value of `-d' given by some make applications. + CPP C preprocessor ++ CXX C++ compiler command ++ CXXFLAGS C++ compiler flags ++ CXXCPP C++ preprocessor ++ F77 Fortran 77 compiler command ++ FFLAGS Fortran 77 compiler flags + + Use these variables to override the choices made by `configure' or to help + it to find libraries and programs with nonstandard names/locations. + + _ACEOF ++ac_status=$? + fi + + if test "$ac_init_help" = "recursive"; then + # If there are subdirs, report their specific --help. +- ac_popdir=`pwd` + for ac_dir in : $ac_subdirs_all; do test "x$ac_dir" = x: && continue +- test -d $ac_dir || continue ++ test -d "$ac_dir" || continue + ac_builddir=. + +-if test "$ac_dir" != .; then ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` +- # A "../" for each directory in $ac_dir_suffix. +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +-else +- ac_dir_suffix= ac_top_builddir= +-fi ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix + + case $srcdir in +- .) # No --srcdir option. We are building in place. ++ .) # We are building in place. + ac_srcdir=. +- if test -z "$ac_top_builddir"; then +- ac_top_srcdir=. +- else +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` +- fi ;; +- [\\/]* | ?:[\\/]* ) # Absolute path. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; +- ac_top_srcdir=$srcdir ;; +- *) # Relative path. +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix +- ac_top_srcdir=$ac_top_builddir$srcdir ;; +-esac +- +-# Do not use `cd foo && pwd` to compute absolute paths, because +-# the directories may not exist. +-case `pwd` in +-.) ac_abs_builddir="$ac_dir";; +-*) +- case "$ac_dir" in +- .) ac_abs_builddir=`pwd`;; +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; +- *) ac_abs_builddir=`pwd`/"$ac_dir";; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_builddir=${ac_top_builddir}.;; +-*) +- case ${ac_top_builddir}. in +- .) ac_abs_top_builddir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_srcdir=$ac_srcdir;; +-*) +- case $ac_srcdir in +- .) ac_abs_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_srcdir=$ac_top_srcdir;; +-*) +- case $ac_top_srcdir in +- .) ac_abs_top_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; +- esac;; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; + esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + +- cd $ac_dir +- # Check for guested configure; otherwise get Cygnus style configure. +- if test -f $ac_srcdir/configure.gnu; then +- echo +- $SHELL $ac_srcdir/configure.gnu --help=recursive +- elif test -f $ac_srcdir/configure; then +- echo +- $SHELL $ac_srcdir/configure --help=recursive +- elif test -f $ac_srcdir/configure.ac || +- test -f $ac_srcdir/configure.in; then +- echo +- $ac_configure --help ++ cd "$ac_dir" || { ac_status=$?; continue; } ++ # Check for guested configure. ++ if test -f "$ac_srcdir/configure.gnu"; then ++ echo && ++ $SHELL "$ac_srcdir/configure.gnu" --help=recursive ++ elif test -f "$ac_srcdir/configure"; then ++ echo && ++ $SHELL "$ac_srcdir/configure" --help=recursive + else + echo "$as_me: WARNING: no configuration information is in $ac_dir" >&2 +- fi +- cd "$ac_popdir" ++ fi || ac_status=$? ++ cd "$ac_pwd" || { ac_status=$?; break; } + done + fi + +-test -n "$ac_init_help" && exit 0 ++test -n "$ac_init_help" && exit $ac_status + if $ac_init_version; then + cat <<\_ACEOF ++configure ++generated by GNU Autoconf 2.61 + +-Copyright (C) 2003 Free Software Foundation, Inc. ++Copyright (C) 1992, 1993, 1994, 1995, 1996, 1998, 1999, 2000, 2001, ++2002, 2003, 2004, 2005, 2006 Free Software Foundation, Inc. + This configure script is free software; the Free Software Foundation + gives unlimited permission to copy, distribute and modify it. + _ACEOF +- exit 0 ++ exit + fi +-exec 5>config.log +-cat >&5 <<_ACEOF ++cat >config.log <<_ACEOF + This file contains any messages produced by compilers while + running configure, to aid debugging if configure makes a mistake. + + It was created by $as_me, which was +-generated by GNU Autoconf 2.59. Invocation command line was ++generated by GNU Autoconf 2.61. Invocation command line was + + $ $0 $@ + + _ACEOF ++exec 5>>config.log + { + cat <<_ASUNAME + ## --------- ## +@@ -1170,7 +1624,7 @@ + /bin/arch = `(/bin/arch) 2>/dev/null || echo unknown` + /usr/bin/arch -k = `(/usr/bin/arch -k) 2>/dev/null || echo unknown` + /usr/convex/getsysinfo = `(/usr/convex/getsysinfo) 2>/dev/null || echo unknown` +-hostinfo = `(hostinfo) 2>/dev/null || echo unknown` ++/usr/bin/hostinfo = `(/usr/bin/hostinfo) 2>/dev/null || echo unknown` + /bin/machine = `(/bin/machine) 2>/dev/null || echo unknown` + /usr/bin/oslevel = `(/usr/bin/oslevel) 2>/dev/null || echo unknown` + /bin/universe = `(/bin/universe) 2>/dev/null || echo unknown` +@@ -1184,6 +1638,7 @@ + test -z "$as_dir" && as_dir=. + echo "PATH: $as_dir" + done ++IFS=$as_save_IFS + + } >&5 + +@@ -1205,7 +1660,6 @@ + ac_configure_args= + ac_configure_args0= + ac_configure_args1= +-ac_sep= + ac_must_keep_next=false + for ac_pass in 1 2 + do +@@ -1216,7 +1670,7 @@ + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil) + continue ;; +- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) ++ *\'*) + ac_arg=`echo "$ac_arg" | sed "s/'/'\\\\\\\\''/g"` ;; + esac + case $ac_pass in +@@ -1238,9 +1692,7 @@ + -* ) ac_must_keep_next=true ;; + esac + fi +- ac_configure_args="$ac_configure_args$ac_sep'$ac_arg'" +- # Get rid of the leading space. +- ac_sep=" " ++ ac_configure_args="$ac_configure_args '$ac_arg'" + ;; + esac + done +@@ -1251,8 +1703,8 @@ + # When interrupted or exit'd, cleanup temporary files, and complete + # config.log. We remove comments because anyway the quotes in there + # would cause problems or look ugly. +-# WARNING: Be sure not to use single quotes in there, as some shells, +-# such as our DU 5.0 friend, will then `close' the trap. ++# WARNING: Use '\'' to represent an apostrophe within the trap. ++# WARNING: Do not start the trap code with a newline, due to a FreeBSD 4.0 bug. + trap 'exit_status=$? + # Save into config.log some information that might help in debugging. + { +@@ -1265,20 +1717,34 @@ + _ASBOX + echo + # The following way of writing the cache mishandles newlines in values, +-{ ++( ++ for ac_var in `(set) 2>&1 | sed -n '\''s/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'\''`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ *) $as_unset $ac_var ;; ++ esac ;; ++ esac ++ done + (set) 2>&1 | +- case `(ac_space='"'"' '"'"'; set | grep ac_space) 2>&1` in +- *ac_space=\ *) ++ case $as_nl`(ac_space='\'' '\''; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) + sed -n \ +- "s/'"'"'/'"'"'\\\\'"'"''"'"'/g; +- s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='"'"'\\2'"'"'/p" +- ;; ++ "s/'\''/'\''\\\\'\'''\''/g; ++ s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\''\\2'\''/p" ++ ;; #( + *) +- sed -n \ +- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; +- esac; +-} ++ esac | ++ sort ++) + echo + + cat <<\_ASBOX +@@ -1289,22 +1755,28 @@ + echo + for ac_var in $ac_subst_vars + do +- eval ac_val=$`echo $ac_var` +- echo "$ac_var='"'"'$ac_val'"'"'" ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ echo "$ac_var='\''$ac_val'\''" + done | sort + echo + + if test -n "$ac_subst_files"; then + cat <<\_ASBOX +-## ------------- ## +-## Output files. ## +-## ------------- ## ++## ------------------- ## ++## File substitutions. ## ++## ------------------- ## + _ASBOX + echo + for ac_var in $ac_subst_files + do +- eval ac_val=$`echo $ac_var` +- echo "$ac_var='"'"'$ac_val'"'"'" ++ eval ac_val=\$$ac_var ++ case $ac_val in ++ *\'\''*) ac_val=`echo "$ac_val" | sed "s/'\''/'\''\\\\\\\\'\'''\''/g"`;; ++ esac ++ echo "$ac_var='\''$ac_val'\''" + done | sort + echo + fi +@@ -1316,26 +1788,24 @@ + ## ----------- ## + _ASBOX + echo +- sed "/^$/d" confdefs.h | sort ++ cat confdefs.h + echo + fi + test "$ac_signal" != 0 && + echo "$as_me: caught signal $ac_signal" + echo "$as_me: exit $exit_status" + } >&5 +- rm -f core *.core && +- rm -rf conftest* confdefs* conf$$* $ac_clean_files && ++ rm -f core *.core core.conftest.* && ++ rm -f -r conftest* confdefs* conf$$* $ac_clean_files && + exit $exit_status +- ' 0 ++' 0 + for ac_signal in 1 2 13 15; do + trap 'ac_signal='$ac_signal'; { (exit 1); exit 1; }' $ac_signal + done + ac_signal=0 + + # confdefs.h avoids OS command line length limits that DEFS can exceed. +-rm -rf conftest* confdefs.h +-# AIX cpp loses on an empty file, so make sure it contains at least a newline. +-echo >confdefs.h ++rm -f -r conftest* confdefs.h + + # Predefined preprocessor variables. + +@@ -1366,14 +1836,17 @@ + + # Let the site file select an alternate cache file if it wants to. + # Prefer explicitly selected file to automatically selected ones. +-if test -z "$CONFIG_SITE"; then +- if test "x$prefix" != xNONE; then +- CONFIG_SITE="$prefix/share/config.site $prefix/etc/config.site" +- else +- CONFIG_SITE="$ac_default_prefix/share/config.site $ac_default_prefix/etc/config.site" +- fi ++if test -n "$CONFIG_SITE"; then ++ set x "$CONFIG_SITE" ++elif test "x$prefix" != xNONE; then ++ set x "$prefix/share/config.site" "$prefix/etc/config.site" ++else ++ set x "$ac_default_prefix/share/config.site" \ ++ "$ac_default_prefix/etc/config.site" + fi +-for ac_site_file in $CONFIG_SITE; do ++shift ++for ac_site_file ++do + if test -r "$ac_site_file"; then + { echo "$as_me:$LINENO: loading site script $ac_site_file" >&5 + echo "$as_me: loading site script $ac_site_file" >&6;} +@@ -1389,8 +1862,8 @@ + { echo "$as_me:$LINENO: loading cache $cache_file" >&5 + echo "$as_me: loading cache $cache_file" >&6;} + case $cache_file in +- [\\/]* | ?:[\\/]* ) . $cache_file;; +- *) . ./$cache_file;; ++ [\\/]* | ?:[\\/]* ) . "$cache_file";; ++ *) . "./$cache_file";; + esac + fi + else +@@ -1402,12 +1875,11 @@ + # Check that the precious variables saved in the cache have kept the same + # value. + ac_cache_corrupted=false +-for ac_var in `(set) 2>&1 | +- sed -n 's/^ac_env_\([a-zA-Z_0-9]*\)_set=.*/\1/p'`; do ++for ac_var in $ac_precious_vars; do + eval ac_old_set=\$ac_cv_env_${ac_var}_set + eval ac_new_set=\$ac_env_${ac_var}_set +- eval ac_old_val="\$ac_cv_env_${ac_var}_value" +- eval ac_new_val="\$ac_env_${ac_var}_value" ++ eval ac_old_val=\$ac_cv_env_${ac_var}_value ++ eval ac_new_val=\$ac_env_${ac_var}_value + case $ac_old_set,$ac_new_set in + set,) + { echo "$as_me:$LINENO: error: \`$ac_var' was set to \`$ac_old_val' in the previous run" >&5 +@@ -1432,8 +1904,7 @@ + # Pass precious variables to config.status. + if test "$ac_new_set" = set; then + case $ac_new_val in +- *" "*|*" "*|*[\[\]\~\#\$\^\&\*\(\)\{\}\\\|\;\<\>\?\"\']*) +- ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; ++ *\'*) ac_arg=$ac_var=`echo "$ac_new_val" | sed "s/'/'\\\\\\\\''/g"` ;; + *) ac_arg=$ac_var=$ac_new_val ;; + esac + case " $ac_configure_args " in +@@ -1450,14 +1921,6 @@ + { (exit 1); exit 1; }; } + fi + +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu +- +- +- + + + +@@ -1474,111 +1937,165 @@ + + + ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + +- ac_config_headers="$ac_config_headers config.h" + +- ac_config_commands="$ac_config_commands default-1" ++ac_config_headers="$ac_config_headers config.h" + + + ac_aux_dir= +-for ac_dir in $srcdir $srcdir/.. $srcdir/../..; do +- if test -f $ac_dir/install-sh; then ++for ac_dir in "$srcdir" "$srcdir/.." "$srcdir/../.."; do ++ if test -f "$ac_dir/install-sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install-sh -c" + break +- elif test -f $ac_dir/install.sh; then ++ elif test -f "$ac_dir/install.sh"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/install.sh -c" + break +- elif test -f $ac_dir/shtool; then ++ elif test -f "$ac_dir/shtool"; then + ac_aux_dir=$ac_dir + ac_install_sh="$ac_aux_dir/shtool install -c" + break + fi + done + if test -z "$ac_aux_dir"; then +- { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&5 +-echo "$as_me: error: cannot find install-sh or install.sh in $srcdir $srcdir/.. $srcdir/../.." >&2;} ++ { { echo "$as_me:$LINENO: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&5 ++echo "$as_me: error: cannot find install-sh or install.sh in \"$srcdir\" \"$srcdir/..\" \"$srcdir/../..\"" >&2;} + { (exit 1); exit 1; }; } + fi +-ac_config_guess="$SHELL $ac_aux_dir/config.guess" +-ac_config_sub="$SHELL $ac_aux_dir/config.sub" +-ac_configure="$SHELL $ac_aux_dir/configure" # This should be Cygnus configure. ++ ++# These three variables are undocumented and unsupported, ++# and are intended to be withdrawn in a future Autoconf release. ++# They can cause serious problems if a builder's source tree is in a directory ++# whose full name contains unusual characters. ++ac_config_guess="$SHELL $ac_aux_dir/config.guess" # Please don't use this var. ++ac_config_sub="$SHELL $ac_aux_dir/config.sub" # Please don't use this var. ++ac_configure="$SHELL $ac_aux_dir/configure" # Please don't use this var. ++ + + # Make sure we can run config.sub. +-$ac_config_sub sun4 >/dev/null 2>&1 || +- { { echo "$as_me:$LINENO: error: cannot run $ac_config_sub" >&5 +-echo "$as_me: error: cannot run $ac_config_sub" >&2;} ++$SHELL "$ac_aux_dir/config.sub" sun4 >/dev/null 2>&1 || ++ { { echo "$as_me:$LINENO: error: cannot run $SHELL $ac_aux_dir/config.sub" >&5 ++echo "$as_me: error: cannot run $SHELL $ac_aux_dir/config.sub" >&2;} + { (exit 1); exit 1; }; } + +-echo "$as_me:$LINENO: checking build system type" >&5 +-echo $ECHO_N "checking build system type... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking build system type" >&5 ++echo $ECHO_N "checking build system type... $ECHO_C" >&6; } + if test "${ac_cv_build+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_cv_build_alias=$build_alias +-test -z "$ac_cv_build_alias" && +- ac_cv_build_alias=`$ac_config_guess` +-test -z "$ac_cv_build_alias" && ++ ac_build_alias=$build_alias ++test "x$ac_build_alias" = x && ++ ac_build_alias=`$SHELL "$ac_aux_dir/config.guess"` ++test "x$ac_build_alias" = x && + { { echo "$as_me:$LINENO: error: cannot guess build type; you must specify one" >&5 + echo "$as_me: error: cannot guess build type; you must specify one" >&2;} + { (exit 1); exit 1; }; } +-ac_cv_build=`$ac_config_sub $ac_cv_build_alias` || +- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_build_alias failed" >&5 +-echo "$as_me: error: $ac_config_sub $ac_cv_build_alias failed" >&2;} ++ac_cv_build=`$SHELL "$ac_aux_dir/config.sub" $ac_build_alias` || ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $ac_build_alias failed" >&2;} + { (exit 1); exit 1; }; } + + fi +-echo "$as_me:$LINENO: result: $ac_cv_build" >&5 +-echo "${ECHO_T}$ac_cv_build" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_build" >&5 ++echo "${ECHO_T}$ac_cv_build" >&6; } ++case $ac_cv_build in ++*-*-*) ;; ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical build" >&5 ++echo "$as_me: error: invalid value of canonical build" >&2;} ++ { (exit 1); exit 1; }; };; ++esac + build=$ac_cv_build +-build_cpu=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +-build_vendor=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +-build_os=`echo $ac_cv_build | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_build ++shift ++build_cpu=$1 ++build_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++build_os=$* ++IFS=$ac_save_IFS ++case $build_os in *\ *) build_os=`echo "$build_os" | sed 's/ /-/g'`;; esac + + +-echo "$as_me:$LINENO: checking host system type" >&5 +-echo $ECHO_N "checking host system type... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking host system type" >&5 ++echo $ECHO_N "checking host system type... $ECHO_C" >&6; } + if test "${ac_cv_host+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_cv_host_alias=$host_alias +-test -z "$ac_cv_host_alias" && +- ac_cv_host_alias=$ac_cv_build_alias +-ac_cv_host=`$ac_config_sub $ac_cv_host_alias` || +- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_host_alias failed" >&5 +-echo "$as_me: error: $ac_config_sub $ac_cv_host_alias failed" >&2;} ++ if test "x$host_alias" = x; then ++ ac_cv_host=$ac_cv_build ++else ++ ac_cv_host=`$SHELL "$ac_aux_dir/config.sub" $host_alias` || ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $host_alias failed" >&2;} + { (exit 1); exit 1; }; } ++fi + + fi +-echo "$as_me:$LINENO: result: $ac_cv_host" >&5 +-echo "${ECHO_T}$ac_cv_host" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_host" >&5 ++echo "${ECHO_T}$ac_cv_host" >&6; } ++case $ac_cv_host in ++*-*-*) ;; ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical host" >&5 ++echo "$as_me: error: invalid value of canonical host" >&2;} ++ { (exit 1); exit 1; }; };; ++esac + host=$ac_cv_host +-host_cpu=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +-host_vendor=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +-host_os=`echo $ac_cv_host | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_host ++shift ++host_cpu=$1 ++host_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++host_os=$* ++IFS=$ac_save_IFS ++case $host_os in *\ *) host_os=`echo "$host_os" | sed 's/ /-/g'`;; esac + + +-echo "$as_me:$LINENO: checking target system type" >&5 +-echo $ECHO_N "checking target system type... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking target system type" >&5 ++echo $ECHO_N "checking target system type... $ECHO_C" >&6; } + if test "${ac_cv_target+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_cv_target_alias=$target_alias +-test "x$ac_cv_target_alias" = "x" && +- ac_cv_target_alias=$ac_cv_host_alias +-ac_cv_target=`$ac_config_sub $ac_cv_target_alias` || +- { { echo "$as_me:$LINENO: error: $ac_config_sub $ac_cv_target_alias failed" >&5 +-echo "$as_me: error: $ac_config_sub $ac_cv_target_alias failed" >&2;} ++ if test "x$target_alias" = x; then ++ ac_cv_target=$ac_cv_host ++else ++ ac_cv_target=`$SHELL "$ac_aux_dir/config.sub" $target_alias` || ++ { { echo "$as_me:$LINENO: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&5 ++echo "$as_me: error: $SHELL $ac_aux_dir/config.sub $target_alias failed" >&2;} + { (exit 1); exit 1; }; } ++fi + + fi +-echo "$as_me:$LINENO: result: $ac_cv_target" >&5 +-echo "${ECHO_T}$ac_cv_target" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_target" >&5 ++echo "${ECHO_T}$ac_cv_target" >&6; } ++case $ac_cv_target in ++*-*-*) ;; ++*) { { echo "$as_me:$LINENO: error: invalid value of canonical target" >&5 ++echo "$as_me: error: invalid value of canonical target" >&2;} ++ { (exit 1); exit 1; }; };; ++esac + target=$ac_cv_target +-target_cpu=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\1/'` +-target_vendor=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\2/'` +-target_os=`echo $ac_cv_target | sed 's/^\([^-]*\)-\([^-]*\)-\(.*\)$/\3/'` ++ac_save_IFS=$IFS; IFS='-' ++set x $ac_cv_target ++shift ++target_cpu=$1 ++target_vendor=$2 ++shift; shift ++# Remember, the first character of IFS is used to create $*, ++# except with old shells: ++target_os=$* ++IFS=$ac_save_IFS ++case $target_os in *\ *) target_os=`echo "$target_os" | sed 's/ /-/g'`;; esac + + + # The aliases save the names the user supplied, while $host etc. +@@ -1588,7 +2105,7 @@ + NONENONEs,x,x, && + program_prefix=${target_alias}- + +-am__api_version="1.4" ++am__api_version="1.9" + # Find a good install program. We prefer a C program (faster), + # so one script is as good as another. But avoid the broken or + # incompatible versions: +@@ -1602,8 +2119,8 @@ + # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" + # OS/2's system install, which has a completely different semantic + # ./install, which can be erroneously created by make from ./install.sh. +-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 ++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } + if test -z "$INSTALL"; then + if test "${ac_cv_path_install+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +@@ -1625,7 +2142,7 @@ + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. +@@ -1644,21 +2161,22 @@ + ;; + esac + done ++IFS=$as_save_IFS + + + fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else +- # As a last resort, use the slow shell script. We don't cache a +- # path for INSTALL within a source directory, because that will ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is +- # removed, or if the path is relative. ++ # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi + fi +-echo "$as_me:$LINENO: result: $INSTALL" >&5 +-echo "${ECHO_T}$INSTALL" >&6 ++{ echo "$as_me:$LINENO: result: $INSTALL" >&5 ++echo "${ECHO_T}$INSTALL" >&6; } + + # Use test -z because SunOS4 sh mishandles braces in ${var-val}. + # It thinks the first close brace ends the variable substitution. +@@ -1668,24 +2186,25 @@ + + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + +-echo "$as_me:$LINENO: checking whether build environment is sane" >&5 +-echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether build environment is sane" >&5 ++echo $ECHO_N "checking whether build environment is sane... $ECHO_C" >&6; } + # Just in case + sleep 1 +-echo timestamp > conftestfile ++echo timestamp > conftest.file + # Do `set' in a subshell so we don't clobber the current shell's + # arguments. Must try -L first in case configure is actually a + # symlink; some systems play weird games with the mod time of symlinks + # (eg FreeBSD returns the mod time of the symlink's containing + # directory). + if ( +- set X `ls -Lt $srcdir/configure conftestfile 2> /dev/null` ++ set X `ls -Lt $srcdir/configure conftest.file 2> /dev/null` + if test "$*" = "X"; then + # -L didn't work. +- set X `ls -t $srcdir/configure conftestfile` ++ set X `ls -t $srcdir/configure conftest.file` + fi +- if test "$*" != "X $srcdir/configure conftestfile" \ +- && test "$*" != "X conftestfile $srcdir/configure"; then ++ rm -f conftest.file ++ if test "$*" != "X $srcdir/configure conftest.file" \ ++ && test "$*" != "X conftest.file $srcdir/configure"; then + + # If neither matched, then we have a broken ls. This can happen + # if, for instance, CONFIG_SHELL is bash and it inherits a +@@ -1698,7 +2217,7 @@ + { (exit 1); exit 1; }; } + fi + +- test "$2" = conftestfile ++ test "$2" = conftest.file + ) + then + # Ok. +@@ -1710,62 +2229,171 @@ + Check your system clock" >&2;} + { (exit 1); exit 1; }; } + fi +-rm -f conftest* +-echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++{ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + test "$program_prefix" != NONE && +- program_transform_name="s,^,$program_prefix,;$program_transform_name" ++ program_transform_name="s&^&$program_prefix&;$program_transform_name" + # Use a double $ so make ignores it. + test "$program_suffix" != NONE && +- program_transform_name="s,\$,$program_suffix,;$program_transform_name" ++ program_transform_name="s&\$&$program_suffix&;$program_transform_name" + # Double any \ or $. echo might interpret backslashes. + # By default was `s,x,x', remove it if useless. + cat <<\_ACEOF >conftest.sed + s/[\\$]/&&/g;s/;s,x,x,$// + _ACEOF + program_transform_name=`echo $program_transform_name | sed -f conftest.sed` +-rm conftest.sed ++rm -f conftest.sed ++ ++# expand $ac_aux_dir to an absolute path ++am_aux_dir=`cd $ac_aux_dir && pwd` ++ ++test x"${MISSING+set}" = xset || MISSING="\${SHELL} $am_aux_dir/missing" ++# Use eval to expand $SHELL ++if eval "$MISSING --run true"; then ++ am_missing_run="$MISSING --run " ++else ++ am_missing_run= ++ { echo "$as_me:$LINENO: WARNING: \`missing' script is too old or missing" >&5 ++echo "$as_me: WARNING: \`missing' script is too old or missing" >&2;} ++fi ++ ++if mkdir -p --version . >/dev/null 2>&1 && test ! -d ./--version; then ++ # We used to keeping the `.' as first argument, in order to ++ # allow $(mkdir_p) to be used without argument. As in ++ # $(mkdir_p) $(somedir) ++ # where $(somedir) is conditionally defined. However this is wrong ++ # for two reasons: ++ # 1. if the package is installed by a user who cannot write `.' ++ # make install will fail, ++ # 2. the above comment should most certainly read ++ # $(mkdir_p) $(DESTDIR)$(somedir) ++ # so it does not work when $(somedir) is undefined and ++ # $(DESTDIR) is not. ++ # To support the latter case, we have to write ++ # test -z "$(somedir)" || $(mkdir_p) $(DESTDIR)$(somedir), ++ # so the `.' trick is pointless. ++ mkdir_p='mkdir -p --' ++else ++ # On NextStep and OpenStep, the `mkdir' command does not ++ # recognize any option. It will interpret all options as ++ # directories to create, and then abort because `.' already ++ # exists. ++ for d in ./-p ./--version; ++ do ++ test -d $d && rmdir $d ++ done ++ # $(mkinstalldirs) is defined by Automake if mkinstalldirs exists. ++ if test -f "$ac_aux_dir/mkinstalldirs"; then ++ mkdir_p='$(mkinstalldirs)' ++ else ++ mkdir_p='$(install_sh) -d' ++ fi ++fi ++ ++for ac_prog in gawk mawk nawk awk ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_AWK+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$AWK"; then ++ ac_cv_prog_AWK="$AWK" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_AWK="$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++AWK=$ac_cv_prog_AWK ++if test -n "$AWK"; then ++ { echo "$as_me:$LINENO: result: $AWK" >&5 ++echo "${ECHO_T}$AWK" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++ test -n "$AWK" && break ++done + +-echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 +-echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6 +-set dummy ${MAKE-make}; ac_make=`echo "$2" | sed 'y,:./+-,___p_,'` +-if eval "test \"\${ac_cv_prog_make_${ac_make}_set+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking whether ${MAKE-make} sets \$(MAKE)" >&5 ++echo $ECHO_N "checking whether ${MAKE-make} sets \$(MAKE)... $ECHO_C" >&6; } ++set x ${MAKE-make}; ac_make=`echo "$2" | sed 's/+/p/g; s/[^a-zA-Z0-9_]/_/g'` ++if { as_var=ac_cv_prog_make_${ac_make}_set; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.make <<\_ACEOF ++SHELL = /bin/sh + all: +- @echo 'ac_maketemp="$(MAKE)"' ++ @echo '@@@%%%=$(MAKE)=@@@%%%' + _ACEOF + # GNU make sometimes prints "make[1]: Entering...", which would confuse us. +-eval `${MAKE-make} -f conftest.make 2>/dev/null | grep temp=` +-if test -n "$ac_maketemp"; then +- eval ac_cv_prog_make_${ac_make}_set=yes +-else +- eval ac_cv_prog_make_${ac_make}_set=no +-fi ++case `${MAKE-make} -f conftest.make 2>/dev/null` in ++ *@@@%%%=?*=@@@%%%*) ++ eval ac_cv_prog_make_${ac_make}_set=yes;; ++ *) ++ eval ac_cv_prog_make_${ac_make}_set=no;; ++esac + rm -f conftest.make + fi +-if eval "test \"`echo '$ac_cv_prog_make_'${ac_make}_set`\" = yes"; then +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++if eval test \$ac_cv_prog_make_${ac_make}_set = yes; then ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + SET_MAKE= + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + SET_MAKE="MAKE=${MAKE-make}" + fi + +- +-PACKAGE=linux-atm +- +-VERSION=2.4.1 +- +-if test "`cd $srcdir && pwd`" != "`pwd`" && test -f $srcdir/config.status; then ++rm -rf .tst 2>/dev/null ++mkdir .tst 2>/dev/null ++if test -d .tst; then ++ am__leading_dot=. ++else ++ am__leading_dot=_ ++fi ++rmdir .tst 2>/dev/null ++ ++# test to see if srcdir already configured ++if test "`cd $srcdir && pwd`" != "`pwd`" && ++ test -f $srcdir/config.status; then + { { echo "$as_me:$LINENO: error: source directory already configured; run \"make distclean\" there first" >&5 + echo "$as_me: error: source directory already configured; run \"make distclean\" there first" >&2;} + { (exit 1); exit 1; }; } + fi + ++# test whether we have cygpath ++if test -z "$CYGPATH_W"; then ++ if (cygpath --version) >/dev/null 2>/dev/null; then ++ CYGPATH_W='cygpath -w' ++ else ++ CYGPATH_W=echo ++ fi ++fi ++ ++ ++# Define the identity of the package. ++ PACKAGE=linux-atm ++ VERSION=2.4.1 ++ ++ + cat >>confdefs.h <<_ACEOF + #define PACKAGE "$PACKAGE" + _ACEOF +@@ -1775,83 +2403,138 @@ + #define VERSION "$VERSION" + _ACEOF + ++# Some tools Automake needs. ++ ++ACLOCAL=${ACLOCAL-"${am_missing_run}aclocal-${am__api_version}"} + + +-missing_dir=`cd $ac_aux_dir && pwd` +-echo "$as_me:$LINENO: checking for working aclocal-${am__api_version}" >&5 +-echo $ECHO_N "checking for working aclocal-${am__api_version}... $ECHO_C" >&6 +-# Run test in a subshell; some versions of sh will print an error if +-# an executable is not found, even if stderr is redirected. +-# Redirect stdin to placate older versions of autoconf. Sigh. +-if (aclocal-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then +- ACLOCAL=aclocal-${am__api_version} +- echo "$as_me:$LINENO: result: found" >&5 +-echo "${ECHO_T}found" >&6 +-else +- ACLOCAL="$missing_dir/missing aclocal-${am__api_version}" +- echo "$as_me:$LINENO: result: missing" >&5 +-echo "${ECHO_T}missing" >&6 +-fi +- +-echo "$as_me:$LINENO: checking for working autoconf" >&5 +-echo $ECHO_N "checking for working autoconf... $ECHO_C" >&6 +-# Run test in a subshell; some versions of sh will print an error if +-# an executable is not found, even if stderr is redirected. +-# Redirect stdin to placate older versions of autoconf. Sigh. +-if (autoconf --version) < /dev/null > /dev/null 2>&1; then +- AUTOCONF=autoconf +- echo "$as_me:$LINENO: result: found" >&5 +-echo "${ECHO_T}found" >&6 +-else +- AUTOCONF="$missing_dir/missing autoconf" +- echo "$as_me:$LINENO: result: missing" >&5 +-echo "${ECHO_T}missing" >&6 +-fi +- +-echo "$as_me:$LINENO: checking for working automake-${am__api_version}" >&5 +-echo $ECHO_N "checking for working automake-${am__api_version}... $ECHO_C" >&6 +-# Run test in a subshell; some versions of sh will print an error if +-# an executable is not found, even if stderr is redirected. +-# Redirect stdin to placate older versions of autoconf. Sigh. +-if (automake-${am__api_version} --version) < /dev/null > /dev/null 2>&1; then +- AUTOMAKE=automake-${am__api_version} +- echo "$as_me:$LINENO: result: found" >&5 +-echo "${ECHO_T}found" >&6 +-else +- AUTOMAKE="$missing_dir/missing automake-${am__api_version}" +- echo "$as_me:$LINENO: result: missing" >&5 +-echo "${ECHO_T}missing" >&6 +-fi +- +-echo "$as_me:$LINENO: checking for working autoheader" >&5 +-echo $ECHO_N "checking for working autoheader... $ECHO_C" >&6 +-# Run test in a subshell; some versions of sh will print an error if +-# an executable is not found, even if stderr is redirected. +-# Redirect stdin to placate older versions of autoconf. Sigh. +-if (autoheader --version) < /dev/null > /dev/null 2>&1; then +- AUTOHEADER=autoheader +- echo "$as_me:$LINENO: result: found" >&5 +-echo "${ECHO_T}found" >&6 +-else +- AUTOHEADER="$missing_dir/missing autoheader" +- echo "$as_me:$LINENO: result: missing" >&5 +-echo "${ECHO_T}missing" >&6 +-fi +- +-echo "$as_me:$LINENO: checking for working makeinfo" >&5 +-echo $ECHO_N "checking for working makeinfo... $ECHO_C" >&6 +-# Run test in a subshell; some versions of sh will print an error if +-# an executable is not found, even if stderr is redirected. +-# Redirect stdin to placate older versions of autoconf. Sigh. +-if (makeinfo --version) < /dev/null > /dev/null 2>&1; then +- MAKEINFO=makeinfo +- echo "$as_me:$LINENO: result: found" >&5 +-echo "${ECHO_T}found" >&6 +-else +- MAKEINFO="$missing_dir/missing makeinfo" +- echo "$as_me:$LINENO: result: missing" >&5 +-echo "${ECHO_T}missing" >&6 ++AUTOCONF=${AUTOCONF-"${am_missing_run}autoconf"} ++ ++ ++AUTOMAKE=${AUTOMAKE-"${am_missing_run}automake-${am__api_version}"} ++ ++ ++AUTOHEADER=${AUTOHEADER-"${am_missing_run}autoheader"} ++ ++ ++MAKEINFO=${MAKEINFO-"${am_missing_run}makeinfo"} ++ ++install_sh=${install_sh-"$am_aux_dir/install-sh"} ++ ++# Installed binaries are usually stripped using `strip' when the user ++# run `make install-strip'. However `strip' might not be the right ++# tool to use in cross-compilation environments, therefore Automake ++# will honor the `STRIP' environment variable to overrule this program. ++if test "$cross_compiling" != no; then ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. ++set dummy ${ac_tool_prefix}strip; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_STRIP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$STRIP"; then ++ ac_cv_prog_STRIP="$STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_STRIP="${ac_tool_prefix}strip" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++STRIP=$ac_cv_prog_STRIP ++if test -n "$STRIP"; then ++ { echo "$as_me:$LINENO: result: $STRIP" >&5 ++echo "${ECHO_T}$STRIP" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_STRIP"; then ++ ac_ct_STRIP=$STRIP ++ # Extract the first word of "strip", so it can be a program name with args. ++set dummy strip; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_STRIP"; then ++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_STRIP="strip" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP ++if test -n "$ac_ct_STRIP"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 ++echo "${ECHO_T}$ac_ct_STRIP" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_STRIP" = x; then ++ STRIP=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ STRIP=$ac_ct_STRIP ++ fi ++else ++ STRIP="$ac_cv_prog_STRIP" ++fi ++ + fi ++INSTALL_STRIP_PROGRAM="\${SHELL} \$(install_sh) -c -s" ++ ++# We need awk for the "check" target. The system "awk" is bad on ++# some platforms. ++# Always define AMTAR for backward compatibility. ++ ++AMTAR=${AMTAR-"${am_missing_run}tar"} ++ ++am__tar='${AMTAR} chof - "$$tardir"'; am__untar='${AMTAR} xf -' ++ ++ ++ + + + +@@ -1870,8 +2553,8 @@ + if test -n "$ac_tool_prefix"; then + # Extract the first word of "${ac_tool_prefix}gcc", so it can be a program name with args. + set dummy ${ac_tool_prefix}gcc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -1884,32 +2567,34 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$ac_cv_prog_CC"; then + ac_ct_CC=$CC + # Extract the first word of "gcc", so it can be a program name with args. + set dummy gcc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -1922,36 +2607,51 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="gcc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- CC=$ac_ct_CC ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi + else + CC="$ac_cv_prog_CC" + fi + + if test -z "$CC"; then +- if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. ++ if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}cc", so it can be a program name with args. + set dummy ${ac_tool_prefix}cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -1964,74 +2664,34 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="${ac_tool_prefix}cc" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 +-else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi +- +-fi +-if test -z "$ac_cv_prog_CC"; then +- ac_ct_CC=$CC +- # Extract the first word of "cc", so it can be a program name with args. +-set dummy cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_ac_ct_CC+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test -n "$ac_ct_CC"; then +- ac_cv_prog_ac_ct_CC="$ac_ct_CC" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then +- ac_cv_prog_ac_ct_CC="cc" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done +- +-fi +-fi +-ac_ct_CC=$ac_cv_prog_ac_ct_CC +-if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- CC=$ac_ct_CC +-else +- CC="$ac_cv_prog_CC" +-fi + ++ fi + fi + if test -z "$CC"; then + # Extract the first word of "cc", so it can be a program name with args. + set dummy cc; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2045,7 +2705,7 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + if test "$as_dir/$ac_word$ac_exec_ext" = "/usr/ucb/cc"; then + ac_prog_rejected=yes + continue +@@ -2056,6 +2716,7 @@ + fi + done + done ++IFS=$as_save_IFS + + if test $ac_prog_rejected = yes; then + # We found a bogon in the path, so make sure we never use it. +@@ -2073,22 +2734,23 @@ + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + fi + if test -z "$CC"; then + if test -n "$ac_tool_prefix"; then +- for ac_prog in cl ++ for ac_prog in cl.exe + do + # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. + set dummy $ac_tool_prefix$ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2101,36 +2763,38 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_CC="$ac_tool_prefix$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + CC=$ac_cv_prog_CC + if test -n "$CC"; then +- echo "$as_me:$LINENO: result: $CC" >&5 +-echo "${ECHO_T}$CC" >&6 ++ { echo "$as_me:$LINENO: result: $CC" >&5 ++echo "${ECHO_T}$CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$CC" && break + done + fi + if test -z "$CC"; then + ac_ct_CC=$CC +- for ac_prog in cl ++ for ac_prog in cl.exe + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_ac_ct_CC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2143,29 +2807,45 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_ac_ct_CC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + ac_ct_CC=$ac_cv_prog_ac_ct_CC + if test -n "$ac_ct_CC"; then +- echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 +-echo "${ECHO_T}$ac_ct_CC" >&6 ++ { echo "$as_me:$LINENO: result: $ac_ct_CC" >&5 ++echo "${ECHO_T}$ac_ct_CC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$ac_ct_CC" && break + done + +- CC=$ac_ct_CC ++ if test "x$ac_ct_CC" = x; then ++ CC="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ CC=$ac_ct_CC ++ fi + fi + + fi +@@ -2178,21 +2858,35 @@ + { (exit 1); exit 1; }; } + + # Provide some information about the compiler. +-echo "$as_me:$LINENO:" \ +- "checking for C compiler version" >&5 ++echo "$as_me:$LINENO: checking for C compiler version" >&5 + ac_compiler=`set X $ac_compile; echo $2` +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler --version &5\"") >&5 +- (eval $ac_compiler --version &5) 2>&5 ++{ (ac_try="$ac_compiler --version >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -v &5\"") >&5 +- (eval $ac_compiler -v &5) 2>&5 ++{ (ac_try="$ac_compiler -v >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -v >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +-{ (eval echo "$as_me:$LINENO: \"$ac_compiler -V &5\"") >&5 +- (eval $ac_compiler -V &5) 2>&5 ++{ (ac_try="$ac_compiler -V >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -V >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } +@@ -2217,47 +2911,77 @@ + # Try to create an executable without -o first, disregard a.out. + # It will help us diagnose broken compilers, and finding out an intuition + # of exeext. +-echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 +-echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for C compiler default output file name" >&5 ++echo $ECHO_N "checking for C compiler default output file name... $ECHO_C" >&6; } + ac_link_default=`echo "$ac_link" | sed 's/ -o *conftest[^ ]*//'` +-if { (eval echo "$as_me:$LINENO: \"$ac_link_default\"") >&5 +- (eval $ac_link_default) 2>&5 ++# ++# List of possible output files, starting from the most likely. ++# The algorithm is not robust to junk in `.', hence go to wildcards (a.*) ++# only as a last resort. b.out is created by i960 compilers. ++ac_files='a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out' ++# ++# The IRIX 6 linker writes into existing files which may not be ++# executable, retaining their permissions. Remove them first so a ++# subsequent execution test works. ++ac_rmfiles= ++for ac_file in $ac_files ++do ++ case $ac_file in ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; ++ * ) ac_rmfiles="$ac_rmfiles $ac_file";; ++ esac ++done ++rm -f $ac_rmfiles ++ ++if { (ac_try="$ac_link_default" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link_default") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- # Find the output, starting from the most likely. This scheme is +-# not robust to junk in `.', hence go to wildcards (a.*) only as a last +-# resort. +- +-# Be careful to initialize this variable, since it used to be cached. +-# Otherwise an old cache value of `no' led to `EXEEXT = no' in a Makefile. +-ac_cv_exeext= +-# b.out is created by i960 compilers. +-for ac_file in a_out.exe a.exe conftest.exe a.out conftest a.* conftest.* b.out ++ # Autoconf-2.13 could set the ac_cv_exeext variable to `no'. ++# So ignore a value of `no', otherwise this would lead to `EXEEXT = no' ++# in a Makefile. We should not override ac_cv_exeext if it was cached, ++# so that the user can short-circuit this test for compilers unknown to ++# Autoconf. ++for ac_file in $ac_files '' + do + test -f "$ac_file" || continue + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) +- ;; +- conftest.$ac_ext ) +- # This is the source file. ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) + ;; + [ab].out ) + # We found the default executable, but exeext='' is most + # certainly right. + break;; + *.* ) +- ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` +- # FIXME: I believe we export ac_cv_exeext for Libtool, +- # but it would be cool to find out if it's true. Does anybody +- # maintain Libtool? --akim. +- export ac_cv_exeext ++ if test "${ac_cv_exeext+set}" = set && test "$ac_cv_exeext" != no; ++ then :; else ++ ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` ++ fi ++ # We set ac_cv_exeext here because the later test for it is not ++ # safe: cross compilers may not add the suffix if given an `-o' ++ # argument, so we may need to know it at that point already. ++ # Even if this section looks crufty: it has the advantage of ++ # actually working. + break;; + * ) + break;; + esac + done ++test "$ac_cv_exeext" = no && ac_cv_exeext= ++ + else ++ ac_file='' ++fi ++ ++{ echo "$as_me:$LINENO: result: $ac_file" >&5 ++echo "${ECHO_T}$ac_file" >&6; } ++if test -z "$ac_file"; then + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +@@ -2269,19 +2993,21 @@ + fi + + ac_exeext=$ac_cv_exeext +-echo "$as_me:$LINENO: result: $ac_file" >&5 +-echo "${ECHO_T}$ac_file" >&6 + +-# Check the compiler produces executables we can run. If not, either ++# Check that the compiler produces executables we can run. If not, either + # the compiler is broken, or we cross compile. +-echo "$as_me:$LINENO: checking whether the C compiler works" >&5 +-echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether the C compiler works" >&5 ++echo $ECHO_N "checking whether the C compiler works... $ECHO_C" >&6; } + # FIXME: These cross compiler hacks should be removed for Autoconf 3.0 + # If not cross compiling, check that we can run a simple program. + if test "$cross_compiling" != yes; then + if { ac_try='./$ac_file' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -2300,22 +3026,27 @@ + fi + fi + fi +-echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++{ echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + + rm -f a.out a.exe conftest$ac_cv_exeext b.out + ac_clean_files=$ac_clean_files_save +-# Check the compiler produces executables we can run. If not, either ++# Check that the compiler produces executables we can run. If not, either + # the compiler is broken, or we cross compile. +-echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 +-echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6 +-echo "$as_me:$LINENO: result: $cross_compiling" >&5 +-echo "${ECHO_T}$cross_compiling" >&6 +- +-echo "$as_me:$LINENO: checking for suffix of executables" >&5 +-echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6 +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++{ echo "$as_me:$LINENO: checking whether we are cross compiling" >&5 ++echo $ECHO_N "checking whether we are cross compiling... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: result: $cross_compiling" >&5 ++echo "${ECHO_T}$cross_compiling" >&6; } ++ ++{ echo "$as_me:$LINENO: checking for suffix of executables" >&5 ++echo $ECHO_N "checking for suffix of executables... $ECHO_C" >&6; } ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +@@ -2326,9 +3057,8 @@ + for ac_file in conftest.exe conftest conftest.*; do + test -f "$ac_file" || continue + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.o | *.obj ) ;; ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf | *.o | *.obj ) ;; + *.* ) ac_cv_exeext=`expr "$ac_file" : '[^.]*\(\..*\)'` +- export ac_cv_exeext + break;; + * ) break;; + esac +@@ -2342,14 +3072,14 @@ + fi + + rm -f conftest$ac_cv_exeext +-echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 +-echo "${ECHO_T}$ac_cv_exeext" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_exeext" >&5 ++echo "${ECHO_T}$ac_cv_exeext" >&6; } + + rm -f conftest.$ac_ext + EXEEXT=$ac_cv_exeext + ac_exeext=$EXEEXT +-echo "$as_me:$LINENO: checking for suffix of object files" >&5 +-echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for suffix of object files" >&5 ++echo $ECHO_N "checking for suffix of object files... $ECHO_C" >&6; } + if test "${ac_cv_objext+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2369,14 +3099,20 @@ + } + _ACEOF + rm -f conftest.o conftest.obj +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- for ac_file in `(ls conftest.o conftest.obj; ls conftest.*) 2>/dev/null`; do ++ for ac_file in conftest.o conftest.obj conftest.*; do ++ test -f "$ac_file" || continue; + case $ac_file in +- *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg ) ;; ++ *.$ac_ext | *.xcoff | *.tds | *.d | *.pdb | *.xSYM | *.bb | *.bbg | *.map | *.inf ) ;; + *) ac_cv_objext=`expr "$ac_file" : '.*\.\(.*\)'` + break;; + esac +@@ -2394,12 +3130,12 @@ + + rm -f conftest.$ac_cv_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 +-echo "${ECHO_T}$ac_cv_objext" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_objext" >&5 ++echo "${ECHO_T}$ac_cv_objext" >&6; } + OBJEXT=$ac_cv_objext + ac_objext=$OBJEXT +-echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 +-echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether we are using the GNU C compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU C compiler... $ECHO_C" >&6; } + if test "${ac_cv_c_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2422,49 +3158,49 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_compiler_gnu=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_compiler_gnu=no ++ ac_compiler_gnu=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + ac_cv_c_compiler_gnu=$ac_compiler_gnu + + fi +-echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 +-echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_c_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_c_compiler_gnu" >&6; } + GCC=`test $ac_compiler_gnu = yes && echo yes` + ac_test_CFLAGS=${CFLAGS+set} + ac_save_CFLAGS=$CFLAGS +-CFLAGS="-g" +-echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 +-echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether $CC accepts -g" >&5 ++echo $ECHO_N "checking whether $CC accepts -g... $ECHO_C" >&6; } + if test "${ac_cv_prog_cc_g+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- cat >conftest.$ac_ext <<_ACEOF ++ ac_save_c_werror_flag=$ac_c_werror_flag ++ ac_c_werror_flag=yes ++ ac_cv_prog_cc_g=no ++ CFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext +@@ -2480,37 +3216,118 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_prog_cc_g=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ CFLAGS="" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_c_werror_flag=$ac_save_c_werror_flag ++ CFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_prog_cc_g=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_prog_cc_g=no ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ac_c_werror_flag=$ac_save_c_werror_flag + fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 +-echo "${ECHO_T}$ac_cv_prog_cc_g" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_cc_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_g" >&6; } + if test "$ac_test_CFLAGS" = set; then + CFLAGS=$ac_save_CFLAGS + elif test $ac_cv_prog_cc_g = yes; then +@@ -2526,12 +3343,12 @@ + CFLAGS= + fi + fi +-echo "$as_me:$LINENO: checking for $CC option to accept ANSI C" >&5 +-echo $ECHO_N "checking for $CC option to accept ANSI C... $ECHO_C" >&6 +-if test "${ac_cv_prog_cc_stdc+set}" = set; then ++{ echo "$as_me:$LINENO: checking for $CC option to accept ISO C89" >&5 ++echo $ECHO_N "checking for $CC option to accept ISO C89... $ECHO_C" >&6; } ++if test "${ac_cv_prog_cc_c89+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_cv_prog_cc_stdc=no ++ ac_cv_prog_cc_c89=no + ac_save_CC=$CC + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -2565,12 +3382,17 @@ + /* OSF 4.0 Compaq cc is some sort of almost-ANSI by default. It has + function prototypes and stuff, but not '\xHH' hex character constants. + These don't provoke an error unfortunately, instead are silently treated +- as 'x'. The following induces an error, until -std1 is added to get ++ as 'x'. The following induces an error, until -std is added to get + proper ANSI mode. Curiously '\x00'!='x' always comes out true, for an + array size at least. It's necessary to write '\x00'==0 to get something +- that's true only with -std1. */ ++ that's true only with -std. */ + int osf4_cc_array ['\x00' == 0 ? 1 : -1]; + ++/* IBM C 6 for AIX is almost-ANSI by default, but it replaces macro parameters ++ inside strings and character constants. */ ++#define FOO(x) 'x' ++int xlc6_cc_array[FOO(a) == 'x' ? 1 : -1]; ++ + int test (int i, double x); + struct s1 {int (*f) (int a);}; + struct s2 {int (*f) (double a);}; +@@ -2585,256 +3407,244 @@ + return 0; + } + _ACEOF +-# Don't try gcc -ansi; that turns off useful extensions and +-# breaks some systems' header files. +-# AIX -qlanglvl=ansi +-# Ultrix and OSF/1 -std1 +-# HP-UX 10.20 and later -Ae +-# HP-UX older versions -Aa -D_HPUX_SOURCE +-# SVR4 -Xc -D__EXTENSIONS__ +-for ac_arg in "" -qlanglvl=ansi -std1 -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" ++for ac_arg in '' -qlanglvl=extc89 -qlanglvl=ansi -std \ ++ -Ae "-Aa -D_HPUX_SOURCE" "-Xc -D__EXTENSIONS__" + do + CC="$ac_save_CC $ac_arg" + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_prog_cc_stdc=$ac_arg +-break ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_prog_cc_c89=$ac_arg + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext ++ ++rm -f core conftest.err conftest.$ac_objext ++ test "x$ac_cv_prog_cc_c89" != "xno" && break + done +-rm -f conftest.$ac_ext conftest.$ac_objext ++rm -f conftest.$ac_ext + CC=$ac_save_CC + + fi +- +-case "x$ac_cv_prog_cc_stdc" in +- x|xno) +- echo "$as_me:$LINENO: result: none needed" >&5 +-echo "${ECHO_T}none needed" >&6 ;; ++# AC_CACHE_VAL ++case "x$ac_cv_prog_cc_c89" in ++ x) ++ { echo "$as_me:$LINENO: result: none needed" >&5 ++echo "${ECHO_T}none needed" >&6; } ;; ++ xno) ++ { echo "$as_me:$LINENO: result: unsupported" >&5 ++echo "${ECHO_T}unsupported" >&6; } ;; + *) +- echo "$as_me:$LINENO: result: $ac_cv_prog_cc_stdc" >&5 +-echo "${ECHO_T}$ac_cv_prog_cc_stdc" >&6 +- CC="$CC $ac_cv_prog_cc_stdc" ;; ++ CC="$CC $ac_cv_prog_cc_c89" ++ { echo "$as_me:$LINENO: result: $ac_cv_prog_cc_c89" >&5 ++echo "${ECHO_T}$ac_cv_prog_cc_c89" >&6; } ;; + esac + +-# Some people use a C++ compiler to compile C. Since we use `exit', +-# in C++ we need to declare it. In case someone uses the same compiler +-# for both compiling C and C++ we need to have the C++ compiler decide +-# the declaration of exit, since it's the most demanding environment. +-cat >conftest.$ac_ext <<_ACEOF +-#ifndef __cplusplus +- choke me +-#endif +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- for ac_declaration in \ +- '' \ +- 'extern "C" void std::exit (int) throw (); using std::exit;' \ +- 'extern "C" void std::exit (int); using std::exit;' \ +- 'extern "C" void exit (int) throw ();' \ +- 'extern "C" void exit (int);' \ +- 'void exit (int);' +-do +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_declaration +-#include +-int +-main () +-{ +-exit (42); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- : +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-continue ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++DEPDIR="${am__leading_dot}deps" ++ ++ac_config_commands="$ac_config_commands depfiles" ++ ++ ++am_make=${MAKE-make} ++cat > confinc << 'END' ++am__doit: ++ @echo done ++.PHONY: am__doit ++END ++# If we don't find an include directive, just comment out the code. ++{ echo "$as_me:$LINENO: checking for style of include used by $am_make" >&5 ++echo $ECHO_N "checking for style of include used by $am_make... $ECHO_C" >&6; } ++am__include="#" ++am__quote= ++_am_result=none ++# First try GNU make style include. ++echo "include confinc" > confmf ++# We grep out `Entering directory' and `Leaving directory' ++# messages which can occur if `w' ends up in MAKEFLAGS. ++# In particular we don't look at `^make:' because GNU make might ++# be invoked under some other name (usually "gmake"), in which ++# case it prints its new name instead of `make'. ++if test "`$am_make -s -f confmf 2> /dev/null | grep -v 'ing directory'`" = "done"; then ++ am__include=include ++ am__quote= ++ _am_result=GNU ++fi ++# Now try BSD make style include. ++if test "$am__include" = "#"; then ++ echo '.include "confinc"' > confmf ++ if test "`$am_make -s -f confmf 2> /dev/null`" = "done"; then ++ am__include=.include ++ am__quote="\"" ++ _am_result=BSD ++ fi + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-$ac_declaration +-int +-main () +-{ +-exit (42); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- break +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + ++ ++{ echo "$as_me:$LINENO: result: $_am_result" >&5 ++echo "${ECHO_T}$_am_result" >&6; } ++rm -f confinc confmf ++ ++# Check whether --enable-dependency-tracking was given. ++if test "${enable_dependency_tracking+set}" = set; then ++ enableval=$enable_dependency_tracking; + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-done +-rm -f conftest* +-if test -n "$ac_declaration"; then +- echo '#ifdef __cplusplus' >>confdefs.h +- echo $ac_declaration >>confdefs.h +- echo '#endif' >>confdefs.h ++ ++if test "x$enable_dependency_tracking" != xno; then ++ am_depcomp="$ac_aux_dir/depcomp" ++ AMDEPBACKSLASH='\' + fi + +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + ++if test "x$enable_dependency_tracking" != xno; then ++ AMDEP_TRUE= ++ AMDEP_FALSE='#' ++else ++ AMDEP_TRUE='#' ++ AMDEP_FALSE= + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +-missing_dir=`cd $ac_aux_dir && pwd` +-for ac_prog in flex lex +-do +- # Extract the first word of "$ac_prog", so it can be a program name with args. +-set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_LEX+set}" = set; then ++ ++ ++depcc="$CC" am_compiler_list= ++ ++{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 ++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } ++if test "${am_cv_CC_dependencies_compiler_type+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- if test -n "$LEX"; then +- ac_cv_prog_LEX="$LEX" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then +- ac_cv_prog_LEX="$ac_prog" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done ++ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then ++ # We make a subdir and do the tests there. Otherwise we can end up ++ # making bogus files that we don't know about and never remove. For ++ # instance it was reported that on HP-UX the gcc test will end up ++ # making a dummy file named `D' -- because `-MD' means `put the output ++ # in D'. ++ mkdir conftest.dir ++ # Copy depcomp to subdir because otherwise we won't find it if we're ++ # using a relative directory. ++ cp "$am_depcomp" conftest.dir ++ cd conftest.dir ++ # We will build objects and dependencies in a subdirectory because ++ # it helps to detect inapplicable dependency modes. For instance ++ # both Tru64's cc and ICC support -MD to output dependencies as a ++ # side effect of compilation, but ICC will put the dependencies in ++ # the current directory while Tru64 will put them in the object ++ # directory. ++ mkdir sub ++ ++ am_cv_CC_dependencies_compiler_type=none ++ if test "$am_compiler_list" = ""; then ++ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` ++ fi ++ for depmode in $am_compiler_list; do ++ # Setup a source with many dependencies, because some compilers ++ # like to wrap large dependency lists on column 80 (with \), and ++ # we should not choose a depcomp mode which is confused by this. ++ # ++ # We need to recreate these files for each test, as the compiler may ++ # overwrite some of them when testing with obscure command lines. ++ # This happens at least with the AIX C compiler. ++ : > sub/conftest.c ++ for i in 1 2 3 4 5 6; do ++ echo '#include "conftst'$i'.h"' >> sub/conftest.c ++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with ++ # Solaris 8's {/usr,}/bin/sh. ++ touch sub/conftst$i.h ++ done ++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf ++ ++ case $depmode in ++ nosideeffect) ++ # after this tag, mechanisms are not by side-effect, so they'll ++ # only be used when explicitly requested ++ if test "x$enable_dependency_tracking" = xyes; then ++ continue ++ else ++ break ++ fi ++ ;; ++ none) break ;; ++ esac ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. ++ if depmode=$depmode \ ++ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ ++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ ++ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ ++ >/dev/null 2>conftest.err && ++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && ++ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then ++ # icc doesn't choke on unknown options, it will just issue warnings ++ # or remarks (even with -Werror). So we grep stderr for any message ++ # that says an option was ignored or not supported. ++ # When given -MP, icc 7.0 and 7.1 complain thusly: ++ # icc: Command line warning: ignoring option '-M'; no argument required ++ # The diagnosis changed in icc 8.0: ++ # icc: Command line remark: option '-MP' not supported ++ if (grep 'ignoring option' conftest.err || ++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else ++ am_cv_CC_dependencies_compiler_type=$depmode ++ break ++ fi ++ fi ++ done + ++ cd .. ++ rm -rf conftest.dir ++else ++ am_cv_CC_dependencies_compiler_type=none + fi ++ + fi +-LEX=$ac_cv_prog_LEX +-if test -n "$LEX"; then +- echo "$as_me:$LINENO: result: $LEX" >&5 +-echo "${ECHO_T}$LEX" >&6 ++{ echo "$as_me:$LINENO: result: $am_cv_CC_dependencies_compiler_type" >&5 ++echo "${ECHO_T}$am_cv_CC_dependencies_compiler_type" >&6; } ++CCDEPMODE=depmode=$am_cv_CC_dependencies_compiler_type ++ ++ ++ ++if ++ test "x$enable_dependency_tracking" != xno \ ++ && test "$am_cv_CC_dependencies_compiler_type" = gcc3; then ++ am__fastdepCC_TRUE= ++ am__fastdepCC_FALSE='#' + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ am__fastdepCC_TRUE='#' ++ am__fastdepCC_FALSE= + fi + +- test -n "$LEX" && break +-done +-test -n "$LEX" || LEX="$missing_dir/missing flex" ++ + + for ac_prog in flex lex + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_LEX+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -2847,250 +3657,182 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_LEX="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + LEX=$ac_cv_prog_LEX + if test -n "$LEX"; then +- echo "$as_me:$LINENO: result: $LEX" >&5 +-echo "${ECHO_T}$LEX" >&6 ++ { echo "$as_me:$LINENO: result: $LEX" >&5 ++echo "${ECHO_T}$LEX" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$LEX" && break + done + test -n "$LEX" || LEX=":" + +-if test -z "$LEXLIB" +-then +- echo "$as_me:$LINENO: checking for yywrap in -lfl" >&5 +-echo $ECHO_N "checking for yywrap in -lfl... $ECHO_C" >&6 +-if test "${ac_cv_lib_fl_yywrap+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lfl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ ++if test "x$LEX" != "x:"; then ++ cat >conftest.l <<_ACEOF ++%% ++a { ECHO; } ++b { REJECT; } ++c { yymore (); } ++d { yyless (1); } ++e { yyless (input () != 0); } ++f { unput (yytext[0]); } ++. { BEGIN INITIAL; } ++%% ++#ifdef YYTEXT_POINTER ++extern char *yytext; ++#endif ++int ++main (void) ++{ ++ return ! yylex () + ! yywrap (); ++} + _ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +- +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char yywrap (); +-int +-main () +-{ +-yywrap (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++{ (ac_try="$LEX conftest.l" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$LEX conftest.l") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_fl_yywrap=yes ++ (exit $ac_status); } ++{ echo "$as_me:$LINENO: checking lex output file root" >&5 ++echo $ECHO_N "checking lex output file root... $ECHO_C" >&6; } ++if test "${ac_cv_prog_lex_root+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_fl_yywrap=no ++if test -f lex.yy.c; then ++ ac_cv_prog_lex_root=lex.yy ++elif test -f lexyy.c; then ++ ac_cv_prog_lex_root=lexyy ++else ++ { { echo "$as_me:$LINENO: error: cannot find output from $LEX; giving up" >&5 ++echo "$as_me: error: cannot find output from $LEX; giving up" >&2;} ++ { (exit 1); exit 1; }; } + fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_fl_yywrap" >&5 +-echo "${ECHO_T}$ac_cv_lib_fl_yywrap" >&6 +-if test $ac_cv_lib_fl_yywrap = yes; then +- LEXLIB="-lfl" +-else +- echo "$as_me:$LINENO: checking for yywrap in -ll" >&5 +-echo $ECHO_N "checking for yywrap in -ll... $ECHO_C" >&6 +-if test "${ac_cv_lib_l_yywrap+set}" = set; then ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_lex_root" >&5 ++echo "${ECHO_T}$ac_cv_prog_lex_root" >&6; } ++LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root ++ ++if test -z "${LEXLIB+set}"; then ++ { echo "$as_me:$LINENO: checking lex library" >&5 ++echo $ECHO_N "checking lex library... $ECHO_C" >&6; } ++if test "${ac_cv_lib_lex+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ll $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char yywrap (); +-int +-main () +-{ +-yywrap (); +- ; +- return 0; +-} ++ ac_save_LIBS=$LIBS ++ ac_cv_lib_lex='none needed' ++ for ac_lib in '' -lfl -ll; do ++ LIBS="$ac_lib $ac_save_LIBS" ++ cat >conftest.$ac_ext <<_ACEOF ++`cat $LEX_OUTPUT_ROOT.c` + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_l_yywrap=yes ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_lex=$ac_lib + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_l_yywrap=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_l_yywrap" >&5 +-echo "${ECHO_T}$ac_cv_lib_l_yywrap" >&6 +-if test $ac_cv_lib_l_yywrap = yes; then +- LEXLIB="-ll" +-fi + + fi + +-fi ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ test "$ac_cv_lib_lex" != 'none needed' && break ++ done ++ LIBS=$ac_save_LIBS + +-if test "x$LEX" != "x:"; then +- echo "$as_me:$LINENO: checking lex output file root" >&5 +-echo $ECHO_N "checking lex output file root... $ECHO_C" >&6 +-if test "${ac_cv_prog_lex_root+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- # The minimal lex program is just a single line: %%. But some broken lexes +-# (Solaris, I think it was) want two %% lines, so accommodate them. +-cat >conftest.l <<_ACEOF +-%% +-%% +-_ACEOF +-{ (eval echo "$as_me:$LINENO: \"$LEX conftest.l\"") >&5 +- (eval $LEX conftest.l) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +-if test -f lex.yy.c; then +- ac_cv_prog_lex_root=lex.yy +-elif test -f lexyy.c; then +- ac_cv_prog_lex_root=lexyy +-else +- { { echo "$as_me:$LINENO: error: cannot find output from $LEX; giving up" >&5 +-echo "$as_me: error: cannot find output from $LEX; giving up" >&2;} +- { (exit 1); exit 1; }; } + fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_lex" >&5 ++echo "${ECHO_T}$ac_cv_lib_lex" >&6; } ++ test "$ac_cv_lib_lex" != 'none needed' && LEXLIB=$ac_cv_lib_lex + fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_lex_root" >&5 +-echo "${ECHO_T}$ac_cv_prog_lex_root" >&6 +-rm -f conftest.l +-LEX_OUTPUT_ROOT=$ac_cv_prog_lex_root + +-echo "$as_me:$LINENO: checking whether yytext is a pointer" >&5 +-echo $ECHO_N "checking whether yytext is a pointer... $ECHO_C" >&6 ++ ++{ echo "$as_me:$LINENO: checking whether yytext is a pointer" >&5 ++echo $ECHO_N "checking whether yytext is a pointer... $ECHO_C" >&6; } + if test "${ac_cv_prog_lex_yytext_pointer+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + # POSIX says lex can declare yytext either as a pointer or an array; the +-# default is implementation-dependent. Figure out which it is, since ++# default is implementation-dependent. Figure out which it is, since + # not all implementations provide the %pointer and %array declarations. + ac_cv_prog_lex_yytext_pointer=no +-echo 'extern char *yytext;' >>$LEX_OUTPUT_ROOT.c + ac_save_LIBS=$LIBS +-LIBS="$LIBS $LEXLIB" ++LIBS="$LEXLIB $ac_save_LIBS" + cat >conftest.$ac_ext <<_ACEOF ++#define YYTEXT_POINTER 1 + `cat $LEX_OUTPUT_ROOT.c` + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_prog_lex_yytext_pointer=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_save_LIBS +-rm -f "${LEX_OUTPUT_ROOT}.c" + + fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_lex_yytext_pointer" >&5 +-echo "${ECHO_T}$ac_cv_prog_lex_yytext_pointer" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_lex_yytext_pointer" >&5 ++echo "${ECHO_T}$ac_cv_prog_lex_yytext_pointer" >&6; } + if test $ac_cv_prog_lex_yytext_pointer = yes; then + + cat >>confdefs.h <<\_ACEOF +@@ -3098,15 +3840,18 @@ + _ACEOF + + fi ++rm -f conftest.l $LEX_OUTPUT_ROOT.c + + fi +- ++if test "$LEX" = :; then ++ LEX=${am_missing_run}flex ++fi + for ac_prog in 'bison -y' byacc + do + # Extract the first word of "$ac_prog", so it can be a program name with args. + set dummy $ac_prog; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_prog_YACC+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3119,25 +3864,27 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_prog_YACC="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + fi + fi + YACC=$ac_cv_prog_YACC + if test -n "$YACC"; then +- echo "$as_me:$LINENO: result: $YACC" >&5 +-echo "${ECHO_T}$YACC" >&6 ++ { echo "$as_me:$LINENO: result: $YACC" >&5 ++echo "${ECHO_T}$YACC" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + ++ + test -n "$YACC" && break + done + test -n "$YACC" || YACC="yacc" +@@ -3155,8 +3902,8 @@ + # SVR4 /usr/ucb/install, which tries to use the nonexistent group "staff" + # OS/2's system install, which has a completely different semantic + # ./install, which can be erroneously created by make from ./install.sh. +-echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 +-echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for a BSD-compatible install" >&5 ++echo $ECHO_N "checking for a BSD-compatible install... $ECHO_C" >&6; } + if test -z "$INSTALL"; then + if test "${ac_cv_path_install+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 +@@ -3178,7 +3925,7 @@ + # by default. + for ac_prog in ginstall scoinst install; do + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_prog$ac_exec_ext" && $as_test_x "$as_dir/$ac_prog$ac_exec_ext"; }; then + if test $ac_prog = install && + grep dspmsg "$as_dir/$ac_prog$ac_exec_ext" >/dev/null 2>&1; then + # AIX install. It has an incompatible calling convention. +@@ -3197,21 +3944,22 @@ + ;; + esac + done ++IFS=$as_save_IFS + + + fi + if test "${ac_cv_path_install+set}" = set; then + INSTALL=$ac_cv_path_install + else +- # As a last resort, use the slow shell script. We don't cache a +- # path for INSTALL within a source directory, because that will ++ # As a last resort, use the slow shell script. Don't cache a ++ # value for INSTALL within a source directory, because that will + # break other packages using the cache if that directory is +- # removed, or if the path is relative. ++ # removed, or if the value is a relative name. + INSTALL=$ac_install_sh + fi + fi +-echo "$as_me:$LINENO: result: $INSTALL" >&5 +-echo "${ECHO_T}$INSTALL" >&6 ++{ echo "$as_me:$LINENO: result: $INSTALL" >&5 ++echo "${ECHO_T}$INSTALL" >&6; } + + # Use test -z because SunOS4 sh mishandles braces in ${var-val}. + # It thinks the first close brace ends the variable substitution. +@@ -3222,96 +3970,310 @@ + test -z "$INSTALL_DATA" && INSTALL_DATA='${INSTALL} -m 644' + + +-# Check whether --enable-shared or --disable-shared was given. ++# Check whether --enable-shared was given. + if test "${enable_shared+set}" = set; then +- enableval="$enable_shared" +- p=${PACKAGE-default} +-case $enableval in +-yes) enable_shared=yes ;; +-no) enable_shared=no ;; +-*) +- enable_shared=no +- # Look at the argument we got. We use all the common list separators. +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," +- for pkg in $enableval; do +- if test "X$pkg" = "X$p"; then +- enable_shared=yes +- fi +- done +- IFS="$ac_save_ifs" +- ;; +-esac ++ enableval=$enable_shared; p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_shared=yes ;; ++ no) enable_shared=no ;; ++ *) ++ enable_shared=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_shared=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac + else + enable_shared=yes +-fi; +-# Check whether --enable-static or --disable-static was given. ++fi ++ ++ ++# Check whether --enable-static was given. + if test "${enable_static+set}" = set; then +- enableval="$enable_static" +- p=${PACKAGE-default} +-case $enableval in +-yes) enable_static=yes ;; +-no) enable_static=no ;; ++ enableval=$enable_static; p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_static=yes ;; ++ no) enable_static=no ;; ++ *) ++ enable_static=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_static=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac ++else ++ enable_static=yes ++fi ++ ++ ++# Check whether --enable-fast-install was given. ++if test "${enable_fast_install+set}" = set; then ++ enableval=$enable_fast_install; p=${PACKAGE-default} ++ case $enableval in ++ yes) enable_fast_install=yes ;; ++ no) enable_fast_install=no ;; ++ *) ++ enable_fast_install=no ++ # Look at the argument we got. We use all the common list separators. ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for pkg in $enableval; do ++ IFS="$lt_save_ifs" ++ if test "X$pkg" = "X$p"; then ++ enable_fast_install=yes ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ;; ++ esac ++else ++ enable_fast_install=yes ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 ++echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6; } ++if test "${lt_cv_path_SED+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # Loop through the user's path and test for sed and gsed. ++# Then use that list of sed's as ones to test for truncation. ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for lt_ac_prog in sed gsed; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if $as_executable_p "$as_dir/$lt_ac_prog$ac_exec_ext"; then ++ lt_ac_sed_list="$lt_ac_sed_list $as_dir/$lt_ac_prog$ac_exec_ext" ++ fi ++ done ++ done ++done ++lt_ac_max=0 ++lt_ac_count=0 ++# Add /usr/xpg4/bin/sed as it is typically found on Solaris ++# along with /bin/sed that truncates output. ++for lt_ac_sed in $lt_ac_sed_list /usr/xpg4/bin/sed; do ++ test ! -f $lt_ac_sed && continue ++ cat /dev/null > conftest.in ++ lt_ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >conftest.in ++ # Check for GNU sed and select it if it is found. ++ if "$lt_ac_sed" --version 2>&1 < /dev/null | grep 'GNU' > /dev/null; then ++ lt_cv_path_SED=$lt_ac_sed ++ break ++ fi ++ while true; do ++ cat conftest.in conftest.in >conftest.tmp ++ mv conftest.tmp conftest.in ++ cp conftest.in conftest.nl ++ echo >>conftest.nl ++ $lt_ac_sed -e 's/a$//' < conftest.nl >conftest.out || break ++ cmp -s conftest.out conftest.nl || break ++ # 10000 chars as input seems more than enough ++ test $lt_ac_count -gt 10 && break ++ lt_ac_count=`expr $lt_ac_count + 1` ++ if test $lt_ac_count -gt $lt_ac_max; then ++ lt_ac_max=$lt_ac_count ++ lt_cv_path_SED=$lt_ac_sed ++ fi ++ done ++done ++ ++fi ++ ++SED=$lt_cv_path_SED ++{ echo "$as_me:$LINENO: result: $SED" >&5 ++echo "${ECHO_T}$SED" >&6; } ++ ++{ echo "$as_me:$LINENO: checking for grep that handles long lines and -e" >&5 ++echo $ECHO_N "checking for grep that handles long lines and -e... $ECHO_C" >&6; } ++if test "${ac_cv_path_GREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # Extract the first word of "grep ggrep" to use in msg output ++if test -z "$GREP"; then ++set dummy grep ggrep; ac_prog_name=$2 ++if test "${ac_cv_path_GREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_path_GREP_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in grep ggrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_GREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_GREP" && $as_test_x "$ac_path_GREP"; } || continue ++ # Check for GNU ac_path_GREP and select it if it is found. ++ # Check for GNU $ac_path_GREP ++case `"$ac_path_GREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_GREP="$ac_path_GREP" ac_path_GREP_found=:;; + *) +- enable_static=no +- # Look at the argument we got. We use all the common list separators. +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," +- for pkg in $enableval; do +- if test "X$pkg" = "X$p"; then +- enable_static=yes ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo 'GREP' >> "conftest.nl" ++ "$ac_path_GREP" -e 'GREP$' -e '-(cannot match)-' < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_GREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_GREP="$ac_path_GREP" ++ ac_path_GREP_max=$ac_count + fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break + done +- IFS="$ac_save_ifs" +- ;; ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; + esac ++ ++ ++ $ac_path_GREP_found && break 3 ++ done ++done ++ ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ ++GREP="$ac_cv_path_GREP" ++if test -z "$GREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ + else +- enable_static=yes +-fi; +-# Check whether --enable-fast-install or --disable-fast-install was given. +-if test "${enable_fast_install+set}" = set; then +- enableval="$enable_fast_install" +- p=${PACKAGE-default} +-case $enableval in +-yes) enable_fast_install=yes ;; +-no) enable_fast_install=no ;; ++ ac_cv_path_GREP=$GREP ++fi ++ ++ ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_path_GREP" >&5 ++echo "${ECHO_T}$ac_cv_path_GREP" >&6; } ++ GREP="$ac_cv_path_GREP" ++ ++ ++{ echo "$as_me:$LINENO: checking for egrep" >&5 ++echo $ECHO_N "checking for egrep... $ECHO_C" >&6; } ++if test "${ac_cv_path_EGREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if echo a | $GREP -E '(a|b)' >/dev/null 2>&1 ++ then ac_cv_path_EGREP="$GREP -E" ++ else ++ # Extract the first word of "egrep" to use in msg output ++if test -z "$EGREP"; then ++set dummy egrep; ac_prog_name=$2 ++if test "${ac_cv_path_EGREP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_path_EGREP_found=false ++# Loop through the user's path and test for each of PROGNAME-LIST ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH$PATH_SEPARATOR/usr/xpg4/bin ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_prog in egrep; do ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ ac_path_EGREP="$as_dir/$ac_prog$ac_exec_ext" ++ { test -f "$ac_path_EGREP" && $as_test_x "$ac_path_EGREP"; } || continue ++ # Check for GNU ac_path_EGREP and select it if it is found. ++ # Check for GNU $ac_path_EGREP ++case `"$ac_path_EGREP" --version 2>&1` in ++*GNU*) ++ ac_cv_path_EGREP="$ac_path_EGREP" ac_path_EGREP_found=:;; + *) +- enable_fast_install=no +- # Look at the argument we got. We use all the common list separators. +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS="${IFS}:," +- for pkg in $enableval; do +- if test "X$pkg" = "X$p"; then +- enable_fast_install=yes ++ ac_count=0 ++ echo $ECHO_N "0123456789$ECHO_C" >"conftest.in" ++ while : ++ do ++ cat "conftest.in" "conftest.in" >"conftest.tmp" ++ mv "conftest.tmp" "conftest.in" ++ cp "conftest.in" "conftest.nl" ++ echo 'EGREP' >> "conftest.nl" ++ "$ac_path_EGREP" 'EGREP$' < "conftest.nl" >"conftest.out" 2>/dev/null || break ++ diff "conftest.out" "conftest.nl" >/dev/null 2>&1 || break ++ ac_count=`expr $ac_count + 1` ++ if test $ac_count -gt ${ac_path_EGREP_max-0}; then ++ # Best one so far, save it but keep looking for a better one ++ ac_cv_path_EGREP="$ac_path_EGREP" ++ ac_path_EGREP_max=$ac_count + fi ++ # 10*(2^10) chars as input seems more than enough ++ test $ac_count -gt 10 && break + done +- IFS="$ac_save_ifs" +- ;; ++ rm -f conftest.in conftest.tmp conftest.nl conftest.out;; + esac ++ ++ ++ $ac_path_EGREP_found && break 3 ++ done ++done ++ ++done ++IFS=$as_save_IFS ++ ++ ++fi ++ ++EGREP="$ac_cv_path_EGREP" ++if test -z "$EGREP"; then ++ { { echo "$as_me:$LINENO: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&5 ++echo "$as_me: error: no acceptable $ac_prog_name could be found in $PATH$PATH_SEPARATOR/usr/xpg4/bin" >&2;} ++ { (exit 1); exit 1; }; } ++fi ++ + else +- enable_fast_install=yes +-fi; +-# Find the correct PATH separator. Usually this is `:', but +-# DJGPP uses `;' like DOS. +-if test "X${PATH_SEPARATOR+set}" != Xset; then +- UNAME=${UNAME-`uname 2>/dev/null`} +- case X$UNAME in +- *-DOS) lt_cv_sys_path_separator=';' ;; +- *) lt_cv_sys_path_separator=':' ;; +- esac +- PATH_SEPARATOR=$lt_cv_sys_path_separator ++ ac_cv_path_EGREP=$EGREP ++fi ++ ++ ++ fi + fi ++{ echo "$as_me:$LINENO: result: $ac_cv_path_EGREP" >&5 ++echo "${ECHO_T}$ac_cv_path_EGREP" >&6; } ++ EGREP="$ac_cv_path_EGREP" + + +-# Check whether --with-gnu-ld or --without-gnu-ld was given. ++ ++# Check whether --with-gnu-ld was given. + if test "${with_gnu_ld+set}" = set; then +- withval="$with_gnu_ld" +- test "$withval" = no || with_gnu_ld=yes ++ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes + else + with_gnu_ld=no +-fi; ++fi ++ + ac_prog=ld + if test "$GCC" = yes; then + # Check if gcc -print-prog-name=ld gives a path. +- echo "$as_me:$LINENO: checking for ld used by GCC" >&5 +-echo $ECHO_N "checking for ld used by GCC... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 ++echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } + case $host in + *-*-mingw*) + # gcc leaves a trailing carriage return which upsets mingw +@@ -3321,12 +4283,12 @@ + esac + case $ac_prog in + # Accept absolute paths. +- [\\/]* | [A-Za-z]:[\\/]*) ++ [\\/]* | ?:[\\/]*) + re_direlt='/[^/][^/]*/\.\./' +- # Canonicalize the path of ld +- ac_prog=`echo $ac_prog| sed 's%\\\\%/%g'` ++ # Canonicalize the pathname of ld ++ ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` + while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do +- ac_prog=`echo $ac_prog| sed "s%$re_direlt%/%"` ++ ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` + done + test -z "$LD" && LD="$ac_prog" + ;; +@@ -3340,32 +4302,36 @@ + ;; + esac + elif test "$with_gnu_ld" = yes; then +- echo "$as_me:$LINENO: checking for GNU ld" >&5 +-echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for GNU ld" >&5 ++echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } + else +- echo "$as_me:$LINENO: checking for non-GNU ld" >&5 +-echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 ++echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } + fi + if test "${lt_cv_path_LD+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + if test -z "$LD"; then +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR + for ac_dir in $PATH; do ++ IFS="$lt_save_ifs" + test -z "$ac_dir" && ac_dir=. + if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then + lt_cv_path_LD="$ac_dir/$ac_prog" + # Check to see if the program is GNU ld. I'd rather use --version, +- # but apparently some GNU ld's only accept -v. ++ # but apparently some variants of GNU ld only accept -v. + # Break only if it was the GNU/non-GNU ld that we prefer. +- if "$lt_cv_path_LD" -v 2>&1 < /dev/null | egrep '(GNU|with BFD)' > /dev/null; then ++ case `"$lt_cv_path_LD" -v 2>&1 &5 +-echo "${ECHO_T}$LD" >&6 ++ { echo "$as_me:$LINENO: result: $LD" >&5 ++echo "${ECHO_T}$LD" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 + echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} + { (exit 1); exit 1; }; } +-echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 +-echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 ++echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } + if test "${lt_cv_prog_gnu_ld+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- # I'd rather use --version here, but apparently some GNU ld's only accept -v. +-if $LD -v 2>&1 &5; then ++ # I'd rather use --version here, but apparently some GNU lds only accept -v. ++case `$LD -v 2>&1 &5 +-echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_gnu_ld" >&5 ++echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } + with_gnu_ld=$lt_cv_prog_gnu_ld + + +-echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 +-echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $LD option to reload object files" >&5 ++echo $ECHO_N "checking for $LD option to reload object files... $ECHO_C" >&6; } + if test "${lt_cv_ld_reload_flag+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + lt_cv_ld_reload_flag='-r' + fi +-echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 +-echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_ld_reload_flag" >&5 ++echo "${ECHO_T}$lt_cv_ld_reload_flag" >&6; } + reload_flag=$lt_cv_ld_reload_flag +-test -n "$reload_flag" && reload_flag=" $reload_flag" ++case $reload_flag in ++"" | " "*) ;; ++*) reload_flag=" $reload_flag" ;; ++esac ++reload_cmds='$LD$reload_flag -o $output$reload_objs' ++case $host_os in ++ darwin*) ++ if test "$GCC" = yes; then ++ reload_cmds='$LTCC $LTCFLAGS -nostdlib ${wl}-r -o $output$reload_objs' ++ else ++ reload_cmds='$LD$reload_flag -o $output$reload_objs' ++ fi ++ ;; ++esac + +-echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 +-echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for BSD-compatible nm" >&5 ++echo $ECHO_N "checking for BSD-compatible nm... $ECHO_C" >&6; } + if test "${lt_cv_path_NM+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3420,134 +4402,63 @@ + # Let the user override the test. + lt_cv_path_NM="$NM" + else +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=$PATH_SEPARATOR +- for ac_dir in $PATH /usr/ccs/bin /usr/ucb /bin; do +- test -z "$ac_dir" && ac_dir=. +- tmp_nm=$ac_dir/${ac_tool_prefix}nm +- if test -f $tmp_nm || test -f $tmp_nm$ac_exeext ; then +- # Check to see if the nm accepts a BSD-compat flag. +- # Adding the `sed 1q' prevents false positives on HP-UX, which says: +- # nm: unknown option "B" ignored +- # Tru64's nm complains that /dev/null is an invalid object file +- if ($tmp_nm -B /dev/null 2>&1 | sed '1q'; exit 0) | egrep '(/dev/null|Invalid file or object type)' >/dev/null; then +- lt_cv_path_NM="$tmp_nm -B" +- break +- elif ($tmp_nm -p /dev/null 2>&1 | sed '1q'; exit 0) | egrep /dev/null >/dev/null; then +- lt_cv_path_NM="$tmp_nm -p" +- break +- else +- lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but +- continue # so that we can try to find one that supports BSD flags +- fi +- fi +- done +- IFS="$ac_save_ifs" +- test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm +-fi +-fi +- +-NM="$lt_cv_path_NM" +-echo "$as_me:$LINENO: result: $NM" >&5 +-echo "${ECHO_T}$NM" >&6 +- +-echo "$as_me:$LINENO: checking for a sed that does not truncate output" >&5 +-echo $ECHO_N "checking for a sed that does not truncate output... $ECHO_C" >&6 +-if test "${lt_cv_path_SED+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- # Loop through the user's path and test for sed and gsed. +-# Then use that list of sed's as ones to test for truncation. +-as_executable_p="test -f" +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_prog in sed gsed; do +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_prog$ac_exec_ext"; then +- _sed_list="$_sed_list $as_dir/$ac_prog$ac_exec_ext" +- fi +- done +- done +-done +- +- # Create a temporary directory, and hook for its removal unless debugging. +-$debug || +-{ +- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 +- trap '{ (exit 1); exit 1; }' 1 2 13 15 +-} +- +-# Create a (secure) tmp directory for tmp files. +-: ${TMPDIR=/tmp} +-{ +- tmp=`(umask 077 && mktemp -d -q "$TMPDIR/sedXXXXXX") 2>/dev/null` && +- test -n "$tmp" && test -d "$tmp" +-} || +-{ +- tmp=$TMPDIR/sed$$-$RANDOM +- (umask 077 && mkdir $tmp) +-} || +-{ +- echo "$me: cannot create a temporary directory in $TMPDIR" >&2 +- { (exit 1); exit 1; } +-} +- _max=0 +- _count=0 +- # Add /usr/xpg4/bin/sed as it is typically found on Solaris +- # along with /bin/sed that truncates output. +- for _sed in $_sed_list /usr/xpg4/bin/sed; do +- test ! -f ${_sed} && break +- cat /dev/null > "$tmp/sed.in" +- _count=0 +- echo ${ECHO_N-$ac_n} "0123456789${ECHO_C-$ac_c}" >"$tmp/sed.in" +- # Check for GNU sed and select it if it is found. +- if "${_sed}" --version 2>&1 < /dev/null | egrep '(GNU)' > /dev/null; then +- lt_cv_path_SED=${_sed} +- break +- fi +- while true; do +- cat "$tmp/sed.in" "$tmp/sed.in" >"$tmp/sed.tmp" +- mv "$tmp/sed.tmp" "$tmp/sed.in" +- cp "$tmp/sed.in" "$tmp/sed.nl" +- echo >>"$tmp/sed.nl" +- ${_sed} -e 's/a$//' < "$tmp/sed.nl" >"$tmp/sed.out" || break +- cmp -s "$tmp/sed.out" "$tmp/sed.nl" || break +- # 40000 chars as input seems more than enough +- test $_count -gt 10 && break +- _count=`expr $_count + 1` +- if test $_count -gt $_max; then +- _max=$_count +- lt_cv_path_SED=$_sed ++ lt_nm_to_check="${ac_tool_prefix}nm" ++ if test -n "$ac_tool_prefix" && test "$build" = "$host"; then ++ lt_nm_to_check="$lt_nm_to_check nm" ++ fi ++ for lt_tmp_nm in $lt_nm_to_check; do ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH /usr/ccs/bin/elf /usr/ccs/bin /usr/ucb /bin; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ tmp_nm="$ac_dir/$lt_tmp_nm" ++ if test -f "$tmp_nm" || test -f "$tmp_nm$ac_exeext" ; then ++ # Check to see if the nm accepts a BSD-compat flag. ++ # Adding the `sed 1q' prevents false positives on HP-UX, which says: ++ # nm: unknown option "B" ignored ++ # Tru64's nm complains that /dev/null is an invalid object file ++ case `"$tmp_nm" -B /dev/null 2>&1 | sed '1q'` in ++ */dev/null* | *'Invalid file or object type'*) ++ lt_cv_path_NM="$tmp_nm -B" ++ break ++ ;; ++ *) ++ case `"$tmp_nm" -p /dev/null 2>&1 | sed '1q'` in ++ */dev/null*) ++ lt_cv_path_NM="$tmp_nm -p" ++ break ++ ;; ++ *) ++ lt_cv_path_NM=${lt_cv_path_NM="$tmp_nm"} # keep the first match, but ++ continue # so that we can try to find one that supports BSD flags ++ ;; ++ esac ++ ;; ++ esac + fi + done ++ IFS="$lt_save_ifs" + done +- rm -rf "$tmp" +- ++ test -z "$lt_cv_path_NM" && lt_cv_path_NM=nm + fi +- +-if test "X$SED" != "X"; then +- lt_cv_path_SED=$SED +-else +- SED=$lt_cv_path_SED + fi +-echo "$as_me:$LINENO: result: $SED" >&5 +-echo "${ECHO_T}$SED" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_path_NM" >&5 ++echo "${ECHO_T}$lt_cv_path_NM" >&6; } ++NM="$lt_cv_path_NM" + +-echo "$as_me:$LINENO: checking whether ln -s works" >&5 +-echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking whether ln -s works" >&5 ++echo $ECHO_N "checking whether ln -s works... $ECHO_C" >&6; } + LN_S=$as_ln_s + if test "$LN_S" = "ln -s"; then +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } + else +- echo "$as_me:$LINENO: result: no, using $LN_S" >&5 +-echo "${ECHO_T}no, using $LN_S" >&6 ++ { echo "$as_me:$LINENO: result: no, using $LN_S" >&5 ++echo "${ECHO_T}no, using $LN_S" >&6; } + fi + +-echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5 +-echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking how to recognise dependent libraries" >&5 ++echo $ECHO_N "checking how to recognise dependent libraries... $ECHO_C" >&6; } + if test "${lt_cv_deplibs_check_method+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -3561,7 +4472,7 @@ + # 'pass_all' -- all dependencies passed with no checks. + # 'test_compile' -- check by making test program. + # 'file_magic [[regex]]' -- check by looking for files in library path +-# which responds to the $file_magic_cmd with a given egrep regex. ++# which responds to the $file_magic_cmd with a given extended regex. + # If you have `file' or equivalent on your system and you're not sure + # whether `pass_all' will *always* work, you probably want this one. + +@@ -3574,37 +4485,36 @@ + lt_cv_deplibs_check_method=pass_all + ;; + +-bsdi4*) ++bsdi[45]*) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib)' + lt_cv_file_magic_cmd='/usr/bin/file -L' + lt_cv_file_magic_test_file=/shlib/libc.so + ;; + +-cygwin* | mingw* | pw32*) ++cygwin*) ++ # func_win32_libid is a shell function defined in ltmain.sh ++ lt_cv_deplibs_check_method='file_magic ^x86 archive import|^x86 DLL' ++ lt_cv_file_magic_cmd='func_win32_libid' ++ ;; ++ ++mingw* | pw32*) ++ # Base MSYS/MinGW do not provide the 'file' command needed by ++ # func_win32_libid shell function, so use a weaker test based on 'objdump'. + lt_cv_deplibs_check_method='file_magic file format pei*-i386(.*architecture: i386)?' + lt_cv_file_magic_cmd='$OBJDUMP -f' + ;; + + darwin* | rhapsody*) +- lt_cv_deplibs_check_method='file_magic Mach-O dynamically linked shared library' +- lt_cv_file_magic_cmd='/usr/bin/file -L' +- case "$host_os" in +- rhapsody* | darwin1.[012]) +- lt_cv_file_magic_test_file=`echo /System/Library/Frameworks/System.framework/Versions/*/System | head -1` +- ;; +- *) # Darwin 1.3 on +- lt_cv_file_magic_test_file='/usr/lib/libSystem.dylib' +- ;; +- esac ++ lt_cv_deplibs_check_method=pass_all + ;; + +-freebsd*) ++freebsd* | dragonfly*) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then + case $host_cpu in + i*86 ) + # Not sure whether the presence of OpenBSD here was a mistake. + # Let's accept both of them until this is cleared up. +- lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD)/i[3-9]86 (compact )?demand paged shared library' ++ lt_cv_deplibs_check_method='file_magic (FreeBSD|OpenBSD|DragonFly)/i[3-9]86 (compact )?demand paged shared library' + lt_cv_file_magic_cmd=/usr/bin/file + lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + ;; +@@ -3618,50 +4528,49 @@ + lt_cv_deplibs_check_method=pass_all + ;; + +-hpux10.20*|hpux11*) +- lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' ++hpux10.20* | hpux11*) + lt_cv_file_magic_cmd=/usr/bin/file +- lt_cv_file_magic_test_file=/usr/lib/libc.sl +- ;; +- +-irix5* | irix6* | nonstopux*) +- case $host_os in +- irix5* | nonstopux*) +- # this will be overridden with pass_all, but let us keep it just in case +- lt_cv_deplibs_check_method="file_magic ELF 32-bit MSB dynamic lib MIPS - version 1" ++ case $host_cpu in ++ ia64*) ++ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - IA64' ++ lt_cv_file_magic_test_file=/usr/lib/hpux32/libc.so ++ ;; ++ hppa*64*) ++ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|ELF-[0-9][0-9]) shared object file - PA-RISC [0-9].[0-9]' ++ lt_cv_file_magic_test_file=/usr/lib/pa20_64/libc.sl + ;; + *) +- case $LD in +- *-32|*"-32 ") libmagic=32-bit;; +- *-n32|*"-n32 ") libmagic=N32;; +- *-64|*"-64 ") libmagic=64-bit;; +- *) libmagic=never-match;; +- esac +- # this will be overridden with pass_all, but let us keep it just in case +- lt_cv_deplibs_check_method="file_magic ELF ${libmagic} MSB mips-[1234] dynamic lib MIPS - version 1" ++ lt_cv_deplibs_check_method='file_magic (s[0-9][0-9][0-9]|PA-RISC[0-9].[0-9]) shared library' ++ lt_cv_file_magic_test_file=/usr/lib/libc.sl + ;; + esac +- lt_cv_file_magic_test_file=`echo /lib${libsuff}/libc.so*` ++ ;; ++ ++interix3*) ++ # PIC code is broken on Interix 3.x, that's why |\.a not |_pic\.a here ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|\.a)$' ++ ;; ++ ++irix5* | irix6* | nonstopux*) ++ case $LD in ++ *-32|*"-32 ") libmagic=32-bit;; ++ *-n32|*"-n32 ") libmagic=N32;; ++ *-64|*"-64 ") libmagic=64-bit;; ++ *) libmagic=never-match;; ++ esac + lt_cv_deplibs_check_method=pass_all + ;; + + # This must be Linux ELF. +-linux-gnu*) +- case $host_cpu in +- alpha* | hppa* | i*86 | mips | mipsel | powerpc* | sparc* | ia64* | arm* | m68k) +- lt_cv_deplibs_check_method=pass_all ;; +- *) +- # glibc up to 2.1.1 does not perform some relocations on ARM +- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )' ;; +- esac +- lt_cv_file_magic_test_file=`echo /lib/libc.so* /lib/libc-*.so` ++linux* | k*bsd*-gnu) ++ lt_cv_deplibs_check_method=pass_all + ;; + +-netbsd*) ++netbsd* | netbsdelf*-gnu) + if echo __ELF__ | $CC -E - | grep __ELF__ > /dev/null; then +- lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so\.[0-9]+\.[0-9]+$' ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + else +- lt_cv_deplibs_check_method='match_pattern /lib[^/\.]+\.so$' ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so|_pic\.a)$' + fi + ;; + +@@ -3671,37 +4580,27 @@ + lt_cv_file_magic_test_file=/usr/lib/libnls.so + ;; + ++nto-qnx*) ++ lt_cv_deplibs_check_method=unknown ++ ;; ++ + openbsd*) +- lt_cv_file_magic_cmd=/usr/bin/file +- lt_cv_file_magic_test_file=`echo /usr/lib/libc.so.*` + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [LM]SB shared object' ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|\.so|_pic\.a)$' + else +- lt_cv_deplibs_check_method='file_magic OpenBSD.* shared library' ++ lt_cv_deplibs_check_method='match_pattern /lib[^/]+(\.so\.[0-9]+\.[0-9]+|_pic\.a)$' + fi + ;; + + osf3* | osf4* | osf5*) +- # this will be overridden with pass_all, but let us keep it just in case +- lt_cv_deplibs_check_method='file_magic COFF format alpha shared library' +- lt_cv_file_magic_test_file=/shlib/libc.so +- lt_cv_deplibs_check_method=pass_all +- ;; +- +-sco3.2v5*) + lt_cv_deplibs_check_method=pass_all + ;; + + solaris*) + lt_cv_deplibs_check_method=pass_all +- lt_cv_file_magic_test_file=/lib/libc.so +- ;; +- +-sysv5uw[78]* | sysv4*uw2*) +- lt_cv_deplibs_check_method=pass_all + ;; + +-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ++sysv4 | sysv4.3*) + case $host_vendor in + motorola) + lt_cv_deplibs_check_method='file_magic ELF [0-9][0-9]*-bit [ML]SB (shared object|dynamic lib) M[0-9][0-9]* Version [0-9]' +@@ -3722,227 +4621,253 @@ + siemens) + lt_cv_deplibs_check_method=pass_all + ;; ++ pc) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + esac + ;; ++ ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ lt_cv_deplibs_check_method=pass_all ++ ;; + esac + + fi +-echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 +-echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6 ++{ echo "$as_me:$LINENO: result: $lt_cv_deplibs_check_method" >&5 ++echo "${ECHO_T}$lt_cv_deplibs_check_method" >&6; } + file_magic_cmd=$lt_cv_file_magic_cmd + deplibs_check_method=$lt_cv_deplibs_check_method ++test -z "$deplibs_check_method" && deplibs_check_method=unknown + + + + ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} + ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + ++# Allow CC to be a program name with arguments. ++compiler=$CC + +-# Check for command to grab the raw symbol name followed by C symbol from nm. +-echo "$as_me:$LINENO: checking command to parse $NM output" >&5 +-echo $ECHO_N "checking command to parse $NM output... $ECHO_C" >&6 +-if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- +-# These are sane defaults that work on at least a few old systems. +-# [They come from Ultrix. What could be older than Ultrix?!! ;)] +- +-# Character class describing NM global symbol codes. +-symcode='[BCDEGRST]' +- +-# Regexp to match symbols that can be accessed directly from C. +-sympat='\([_A-Za-z][_A-Za-z0-9]*\)' +- +-# Transform the above into a raw symbol and a C symbol. +-symxfrm='\1 \2\3 \3' +- +-# Transform an extracted symbol line into a proper C declaration +-lt_cv_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern char \1;/p'" +- +-# Transform an extracted symbol line into symbol name and symbol address +-lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" +- +-# Define system-specific variables. +-case $host_os in +-aix*) +- symcode='[BCDT]' +- ;; +-cygwin* | mingw* | pw32*) +- symcode='[ABCDGISTW]' +- ;; +-hpux*) # Its linker distinguishes data from code symbols +- lt_cv_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern char \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" +- lt_cv_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" +- ;; +-irix* | nonstopux*) +- symcode='[BCDEGRST]' +- ;; +-osf*) +- symcode='[BCDEGQRST]' +- ;; +-solaris* | sysv5*) +- symcode='[BDT]' +- ;; +-sysv4) +- symcode='[DFNSTU]' +- ;; +-esac +- +-# Handle CRLF in mingw tool chain +-opt_cr= +-case $host_os in +-mingw*) +- opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp +- ;; +-esac +- +-# If we're using GNU nm, then use its standard symbol codes. +-if $NM -V 2>&1 | egrep '(GNU|with BFD)' > /dev/null; then +- symcode='[ABCDGISTW]' ++# Check whether --enable-libtool-lock was given. ++if test "${enable_libtool_lock+set}" = set; then ++ enableval=$enable_libtool_lock; + fi + +-# Try without a prefix undercore, then with it. +-for ac_symprfx in "" "_"; do +- +- # Write the raw and C identifiers. +-lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*\($ac_symprfx\)$sympat$opt_cr$/$symxfrm/p'" +- +- # Check to see that the pipe works correctly. +- pipe_works=no +- rm -f conftest* +- cat > conftest.$ac_ext < conftest.$ac_ext + if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 + (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; then +- # Now try to grab the symbols. +- nlist=conftest.nm +- if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 +- (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 ++ case `/usr/bin/file conftest.$ac_objext` in ++ *ELF-32*) ++ HPUX_IA64_MODE="32" ++ ;; ++ *ELF-64*) ++ HPUX_IA64_MODE="64" ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++*-*-irix6*) ++ # Find out which ABI we are using. ++ echo '#line 4685 "configure"' > conftest.$ac_ext ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s "$nlist"; then +- # Try sorting and uniquifying the output. +- if sort "$nlist" | uniq > "$nlist"T; then +- mv -f "$nlist"T "$nlist" +- else +- rm -f "$nlist"T +- fi +- +- # Make sure that we snagged all the symbols we need. +- if egrep ' nm_test_var$' "$nlist" >/dev/null; then +- if egrep ' nm_test_func$' "$nlist" >/dev/null; then +- cat < conftest.$ac_ext +-#ifdef __cplusplus +-extern "C" { +-#endif +- +-EOF +- # Now generate the symbol file. +- eval "$lt_cv_global_symbol_to_cdecl"' < "$nlist" >> conftest.$ac_ext' +- +- cat <> conftest.$ac_ext +-#if defined (__STDC__) && __STDC__ +-# define lt_ptr void * +-#else +-# define lt_ptr char * +-# define const +-#endif +- +-/* The mapping between symbol names and symbols. */ +-const struct { +- const char *name; +- lt_ptr address; +-} +-lt_preloaded_symbols[] = +-{ +-EOF +- sed "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr) \&\2},/" < "$nlist" >> conftest.$ac_ext +- cat <<\EOF >> conftest.$ac_ext +- {0, (lt_ptr) 0} +-}; ++ (exit $ac_status); }; then ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -melf32bsmip" ++ ;; ++ *N32*) ++ LD="${LD-ld} -melf32bmipn32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -melf64bmip" ++ ;; ++ esac ++ else ++ case `/usr/bin/file conftest.$ac_objext` in ++ *32-bit*) ++ LD="${LD-ld} -32" ++ ;; ++ *N32*) ++ LD="${LD-ld} -n32" ++ ;; ++ *64-bit*) ++ LD="${LD-ld} -64" ++ ;; ++ esac ++ fi ++ fi ++ rm -rf conftest* ++ ;; + +-#ifdef __cplusplus +-} +-#endif +-EOF +- # Now try linking the two files. +- mv conftest.$ac_objext conftstm.$ac_objext +- save_LIBS="$LIBS" +- save_CFLAGS="$CFLAGS" +- LIBS="conftstm.$ac_objext" +- CFLAGS="$CFLAGS$no_builtin_flag" +- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++x86_64-*linux*|ppc*-*linux*|powerpc*-*linux*|s390*-*linux*|sparc*-*linux*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s conftest$ac_exeext; then +- pipe_works=yes +- fi +- LIBS="$save_LIBS" +- CFLAGS="$save_CFLAGS" +- else +- echo "cannot find nm_test_func in $nlist" >&5 +- fi +- else +- echo "cannot find nm_test_var in $nlist" >&5 +- fi +- else +- echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 +- fi +- else +- echo "$progname: failed program was:" >&5 +- cat conftest.$ac_ext >&5 ++ (exit $ac_status); }; then ++ case `/usr/bin/file conftest.o` in ++ *32-bit*) ++ case $host in ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_i386" ++ ;; ++ ppc64-*linux*|powerpc64-*linux*) ++ LD="${LD-ld} -m elf32ppclinux" ++ ;; ++ s390x-*linux*) ++ LD="${LD-ld} -m elf_s390" ++ ;; ++ sparc64-*linux*) ++ LD="${LD-ld} -m elf32_sparc" ++ ;; ++ esac ++ ;; ++ *64-bit*) ++ case $host in ++ x86_64-*linux*) ++ LD="${LD-ld} -m elf_x86_64" ++ ;; ++ ppc*-*linux*|powerpc*-*linux*) ++ LD="${LD-ld} -m elf64ppc" ++ ;; ++ s390*-*linux*) ++ LD="${LD-ld} -m elf64_s390" ++ ;; ++ sparc*-*linux*) ++ LD="${LD-ld} -m elf64_sparc" ++ ;; ++ esac ++ ;; ++ esac + fi +- rm -f conftest* conftst* ++ rm -rf conftest* ++ ;; + +- # Do not use the global_symbol_pipe unless it works. +- if test "$pipe_works" = yes; then +- break +- else +- lt_cv_sys_global_symbol_pipe= +- fi +-done ++*-*-sco3.2v5*) ++ # On SCO OpenServer 5, we need -belf to get full-featured binaries. ++ SAVE_CFLAGS="$CFLAGS" ++ CFLAGS="$CFLAGS -belf" ++ { echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 ++echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6; } ++if test "${lt_cv_cc_needs_belf+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + +-fi ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + +-global_symbol_pipe="$lt_cv_sys_global_symbol_pipe" +-if test -z "$lt_cv_sys_global_symbol_pipe"; then +- global_symbol_to_cdecl= +- global_symbol_to_c_name_address= ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ lt_cv_cc_needs_belf=yes + else +- global_symbol_to_cdecl="$lt_cv_global_symbol_to_cdecl" +- global_symbol_to_c_name_address="$lt_cv_global_symbol_to_c_name_address" ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ lt_cv_cc_needs_belf=no + fi +-if test -z "$global_symbol_pipe$global_symbol_to_cdec$global_symbol_to_c_name_address"; +-then +- echo "$as_me:$LINENO: result: failed" >&5 +-echo "${ECHO_T}failed" >&6 +-else +- echo "$as_me:$LINENO: result: ok" >&5 +-echo "${ECHO_T}ok" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++ ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ + fi ++{ echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 ++echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6; } ++ if test x"$lt_cv_cc_needs_belf" != x"yes"; then ++ # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf ++ CFLAGS="$SAVE_CFLAGS" ++ fi ++ ;; ++sparc*-*solaris*) ++ # Find out which ABI we are using. ++ echo 'int i;' > conftest.$ac_ext ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ case `/usr/bin/file conftest.o` in ++ *64-bit*) ++ case $lt_cv_prog_gnu_ld in ++ yes*) LD="${LD-ld} -m elf64_sparc" ;; ++ *) LD="${LD-ld} -64" ;; ++ esac ++ ;; ++ esac ++ fi ++ rm -rf conftest* ++ ;; ++ ++ ++esac ++ ++need_locks="$enable_libtool_lock" ++ + + ac_ext=c + ac_cpp='$CPP $CPPFLAGS' + ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' + ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' + ac_compiler_gnu=$ac_cv_c_compiler_gnu +-echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 +-echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking how to run the C preprocessor" >&5 ++echo $ECHO_N "checking how to run the C preprocessor... $ECHO_C" >&6; } + # On Suns, sometimes $CPP names a directory. + if test -n "$CPP" && test -d "$CPP"; then + CPP= +@@ -3976,24 +4901,22 @@ + #endif + Syntax error + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + : + else + echo "$as_me: failed program was:" >&5 +@@ -4002,9 +4925,10 @@ + # Broken: fails on valid input. + continue + fi ++ + rm -f conftest.err conftest.$ac_ext + +- # OK, works on sane cases. Now check whether non-existent headers ++ # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -4014,24 +4938,22 @@ + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + # Broken: success on invalid input. + continue + else +@@ -4042,6 +4964,7 @@ + ac_preproc_ok=: + break + fi ++ + rm -f conftest.err conftest.$ac_ext + + done +@@ -4059,8 +4982,8 @@ + else + ac_cv_prog_CPP=$CPP + fi +-echo "$as_me:$LINENO: result: $CPP" >&5 +-echo "${ECHO_T}$CPP" >&6 ++{ echo "$as_me:$LINENO: result: $CPP" >&5 ++echo "${ECHO_T}$CPP" >&6; } + ac_preproc_ok=false + for ac_c_preproc_warn_flag in '' yes + do +@@ -4083,24 +5006,22 @@ + #endif + Syntax error + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + : + else + echo "$as_me: failed program was:" >&5 +@@ -4109,9 +5030,10 @@ + # Broken: fails on valid input. + continue + fi ++ + rm -f conftest.err conftest.$ac_ext + +- # OK, works on sane cases. Now check whether non-existent headers ++ # OK, works on sane cases. Now check whether nonexistent headers + # can be detected and how. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ +@@ -4121,24 +5043,22 @@ + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + # Broken: success on invalid input. + continue + else +@@ -4149,6 +5069,7 @@ + ac_preproc_ok=: + break + fi ++ + rm -f conftest.err conftest.$ac_ext + + done +@@ -4171,23 +5092,8 @@ + ac_compiler_gnu=$ac_cv_c_compiler_gnu + + +-echo "$as_me:$LINENO: checking for egrep" >&5 +-echo $ECHO_N "checking for egrep... $ECHO_C" >&6 +-if test "${ac_cv_prog_egrep+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if echo a | (grep -E '(a|b)') >/dev/null 2>&1 +- then ac_cv_prog_egrep='grep -E' +- else ac_cv_prog_egrep='egrep' +- fi +-fi +-echo "$as_me:$LINENO: result: $ac_cv_prog_egrep" >&5 +-echo "${ECHO_T}$ac_cv_prog_egrep" >&6 +- EGREP=$ac_cv_prog_egrep +- +- +-echo "$as_me:$LINENO: checking for ANSI C header files" >&5 +-echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for ANSI C header files" >&5 ++echo $ECHO_N "checking for ANSI C header files... $ECHO_C" >&6; } + if test "${ac_cv_header_stdc+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -4211,34 +5117,31 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_cv_header_stdc=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_header_stdc=no ++ ac_cv_header_stdc=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + + if test $ac_cv_header_stdc = yes; then + # SunOS 4.x string.h does not declare mem*, contrary to ANSI. +@@ -4294,6 +5197,7 @@ + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ + #include ++#include + #if ((' ' & 0x0FF) == 0x020) + # define ISLOWER(c) ('a' <= (c) && (c) <= 'z') + # define TOUPPER(c) (ISLOWER(c) ? 'A' + ((c) - 'a') : (c)) +@@ -4313,18 +5217,27 @@ + for (i = 0; i < 256; i++) + if (XOR (islower (i), ISLOWER (i)) + || toupper (i) != TOUPPER (i)) +- exit(2); +- exit (0); ++ return 2; ++ return 0; + } + _ACEOF + rm -f conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); } && { ac_try='./conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ { (case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_try") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 + (exit $ac_status); }; }; then +@@ -4337,12 +5250,14 @@ + ( exit $ac_status ) + ac_cv_header_stdc=no + fi +-rm -f core *.core gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext ++rm -f core *.core core.conftest.* gmon.out bb.out conftest$ac_exeext conftest.$ac_objext conftest.$ac_ext + fi ++ ++ + fi + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 +-echo "${ECHO_T}$ac_cv_header_stdc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_stdc" >&5 ++echo "${ECHO_T}$ac_cv_header_stdc" >&6; } + if test $ac_cv_header_stdc = yes; then + + cat >>confdefs.h <<\_ACEOF +@@ -4365,9 +5280,9 @@ + inttypes.h stdint.h unistd.h + do + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + cat >conftest.$ac_ext <<_ACEOF +@@ -4381,37 +5296,35 @@ + #include <$ac_header> + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + eval "$as_ac_Header=yes" + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-eval "$as_ac_Header=no" ++ eval "$as_ac_Header=no" + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + if test `eval echo '${'$as_ac_Header'}'` = yes; then + cat >>confdefs.h <<_ACEOF + #define `echo "HAVE_$ac_header" | $as_tr_cpp` 1 +@@ -4426,18 +5339,19 @@ + for ac_header in dlfcn.h + do + as_ac_Header=`echo "ac_cv_header_$ac_header" | $as_tr_sh` +-if eval "test \"\${$as_ac_Header+set}\" = set"; then +- echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then ++ { echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking $ac_header usability" >&5 +-echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header usability" >&5 ++echo $ECHO_N "checking $ac_header usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -4448,40 +5362,37 @@ + #include <$ac_header> + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking $ac_header presence" >&5 +-echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking $ac_header presence" >&5 ++echo $ECHO_N "checking $ac_header presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -4490,24 +5401,22 @@ + /* end confdefs.h. */ + #include <$ac_header> + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 +@@ -4515,9 +5424,10 @@ + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -4541,25 +5451,19 @@ + echo "$as_me: WARNING: $ac_header: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: $ac_header: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: $ac_header: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## ------------------------------------------ ## +-## Report this to the AC_PACKAGE_NAME lists. ## +-## ------------------------------------------ ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for $ac_header" >&5 +-echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6 +-if eval "test \"\${$as_ac_Header+set}\" = set"; then ++{ echo "$as_me:$LINENO: checking for $ac_header" >&5 ++echo $ECHO_N "checking for $ac_header... $ECHO_C" >&6; } ++if { as_var=$as_ac_Header; eval "test \"\${$as_var+set}\" = set"; }; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + eval "$as_ac_Header=\$ac_header_preproc" + fi +-echo "$as_me:$LINENO: result: `eval echo '${'$as_ac_Header'}'`" >&5 +-echo "${ECHO_T}`eval echo '${'$as_ac_Header'}'`" >&6 ++ac_res=`eval echo '${'$as_ac_Header'}'` ++ { echo "$as_me:$LINENO: result: $ac_res" >&5 ++echo "${ECHO_T}$ac_res" >&6; } + + fi + if test `eval echo '${'$as_ac_Header'}'` = yes; then +@@ -4571,198 +5475,71 @@ + + done + +- +- +- +- +- +-# Only perform the check for file, if the check method requires it +-case $deplibs_check_method in +-file_magic*) +- if test "$file_magic_cmd" = '$MAGIC_CMD'; then +- echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 +-echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6 +-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then ++ac_ext=cpp ++ac_cpp='$CXXCPP $CPPFLAGS' ++ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_cxx_compiler_gnu ++if test -z "$CXX"; then ++ if test -n "$CCC"; then ++ CXX=$CCC ++ else ++ if test -n "$ac_tool_prefix"; then ++ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC ++ do ++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ++set dummy $ac_tool_prefix$ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_CXX+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- case $MAGIC_CMD in +- /*) +- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. +- ;; +- ?:/*) +- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. +- ;; +- *) +- ac_save_MAGIC_CMD="$MAGIC_CMD" +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" +- ac_dummy="/usr/bin:$PATH" +- for ac_dir in $ac_dummy; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/${ac_tool_prefix}file; then +- lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" +- if test -n "$file_magic_test_file"; then +- case $deplibs_check_method in +- "file_magic "*) +- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" +- MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | +- egrep "$file_magic_regex" > /dev/null; then +- : +- else +- cat <&2 +- +-*** Warning: the command libtool uses to detect shared libraries, +-*** $file_magic_cmd, produces output that libtool cannot recognize. +-*** The result is that libtool may fail to recognize shared libraries +-*** as such. This will affect the creation of libtool libraries that +-*** depend on shared libraries, but programs linked with such libtool +-*** libraries will work regardless of this problem. Nevertheless, you +-*** may want to report the problem to your system manager and/or to +-*** bug-libtool@gnu.org ++ if test -n "$CXX"; then ++ ac_cv_prog_CXX="$CXX" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_CXX="$ac_tool_prefix$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS + +-EOF +- fi ;; +- esac +- fi +- break +- fi +- done +- IFS="$ac_save_ifs" +- MAGIC_CMD="$ac_save_MAGIC_CMD" +- ;; +-esac + fi +- +-MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +-if test -n "$MAGIC_CMD"; then +- echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +-echo "${ECHO_T}$MAGIC_CMD" >&6 ++fi ++CXX=$ac_cv_prog_CXX ++if test -n "$CXX"; then ++ { echo "$as_me:$LINENO: result: $CXX" >&5 ++echo "${ECHO_T}$CXX" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +-if test -z "$lt_cv_path_MAGIC_CMD"; then +- if test -n "$ac_tool_prefix"; then +- echo "$as_me:$LINENO: checking for file" >&5 +-echo $ECHO_N "checking for file... $ECHO_C" >&6 +-if test "${lt_cv_path_MAGIC_CMD+set}" = set; then ++ ++ test -n "$CXX" && break ++ done ++fi ++if test -z "$CXX"; then ++ ac_ct_CXX=$CXX ++ for ac_prog in g++ c++ gpp aCC CC cxx cc++ cl.exe FCC KCC RCC xlC_r xlC ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_CXX+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- case $MAGIC_CMD in +- /*) +- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. +- ;; +- ?:/*) +- lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a dos path. +- ;; +- *) +- ac_save_MAGIC_CMD="$MAGIC_CMD" +- IFS="${IFS= }"; ac_save_ifs="$IFS"; IFS=":" +- ac_dummy="/usr/bin:$PATH" +- for ac_dir in $ac_dummy; do +- test -z "$ac_dir" && ac_dir=. +- if test -f $ac_dir/file; then +- lt_cv_path_MAGIC_CMD="$ac_dir/file" +- if test -n "$file_magic_test_file"; then +- case $deplibs_check_method in +- "file_magic "*) +- file_magic_regex="`expr \"$deplibs_check_method\" : \"file_magic \(.*\)\"`" +- MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +- if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | +- egrep "$file_magic_regex" > /dev/null; then +- : +- else +- cat <&2 +- +-*** Warning: the command libtool uses to detect shared libraries, +-*** $file_magic_cmd, produces output that libtool cannot recognize. +-*** The result is that libtool may fail to recognize shared libraries +-*** as such. This will affect the creation of libtool libraries that +-*** depend on shared libraries, but programs linked with such libtool +-*** libraries will work regardless of this problem. Nevertheless, you +-*** may want to report the problem to your system manager and/or to +-*** bug-libtool@gnu.org +- +-EOF +- fi ;; +- esac +- fi +- break +- fi +- done +- IFS="$ac_save_ifs" +- MAGIC_CMD="$ac_save_MAGIC_CMD" +- ;; +-esac +-fi +- +-MAGIC_CMD="$lt_cv_path_MAGIC_CMD" +-if test -n "$MAGIC_CMD"; then +- echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 +-echo "${ECHO_T}$MAGIC_CMD" >&6 +-else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi +- +- else +- MAGIC_CMD=: +- fi +-fi +- +- fi +- ;; +-esac +- +-if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. +-set dummy ${ac_tool_prefix}ranlib; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_RANLIB+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test -n "$RANLIB"; then +- ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then +- ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi +-done +-done +- +-fi +-fi +-RANLIB=$ac_cv_prog_RANLIB +-if test -n "$RANLIB"; then +- echo "$as_me:$LINENO: result: $RANLIB" >&5 +-echo "${ECHO_T}$RANLIB" >&6 +-else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi +- +-fi +-if test -z "$ac_cv_prog_RANLIB"; then +- ac_ct_RANLIB=$RANLIB +- # Extract the first word of "ranlib", so it can be a program name with args. +-set dummy ranlib; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test -n "$ac_ct_RANLIB"; then +- ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. ++ if test -n "$ac_ct_CXX"; then ++ ac_cv_prog_ac_ct_CXX="$ac_ct_CXX" # Let the user override the test. + else + as_save_IFS=$IFS; IFS=$PATH_SEPARATOR + for as_dir in $PATH +@@ -4770,166 +5547,89 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then +- ac_cv_prog_ac_ct_RANLIB="ranlib" ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_CXX="$ac_prog" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + +- test -z "$ac_cv_prog_ac_ct_RANLIB" && ac_cv_prog_ac_ct_RANLIB=":" + fi + fi +-ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB +-if test -n "$ac_ct_RANLIB"; then +- echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 +-echo "${ECHO_T}$ac_ct_RANLIB" >&6 ++ac_ct_CXX=$ac_cv_prog_ac_ct_CXX ++if test -n "$ac_ct_CXX"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_CXX" >&5 ++echo "${ECHO_T}$ac_ct_CXX" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + +- RANLIB=$ac_ct_RANLIB +-else +- RANLIB="$ac_cv_prog_RANLIB" +-fi + +-if test -n "$ac_tool_prefix"; then +- # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. +-set dummy ${ac_tool_prefix}strip; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_STRIP+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test -n "$STRIP"; then +- ac_cv_prog_STRIP="$STRIP" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then +- ac_cv_prog_STRIP="${ac_tool_prefix}strip" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 +- fi ++ test -n "$ac_ct_CXX" && break + done +-done +- +-fi +-fi +-STRIP=$ac_cv_prog_STRIP +-if test -n "$STRIP"; then +- echo "$as_me:$LINENO: result: $STRIP" >&5 +-echo "${ECHO_T}$STRIP" >&6 +-else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 +-fi + +-fi +-if test -z "$ac_cv_prog_STRIP"; then +- ac_ct_STRIP=$STRIP +- # Extract the first word of "strip", so it can be a program name with args. +-set dummy strip; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 +-if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test -n "$ac_ct_STRIP"; then +- ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. +-else +-as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then +- ac_cv_prog_ac_ct_STRIP="strip" +- echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 +- break 2 ++ if test "x$ac_ct_CXX" = x; then ++ CXX="g++" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ CXX=$ac_ct_CXX + fi +-done +-done +- +- test -z "$ac_cv_prog_ac_ct_STRIP" && ac_cv_prog_ac_ct_STRIP=":" +-fi +-fi +-ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP +-if test -n "$ac_ct_STRIP"; then +- echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 +-echo "${ECHO_T}$ac_ct_STRIP" >&6 +-else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 + fi + +- STRIP=$ac_ct_STRIP +-else +- STRIP="$ac_cv_prog_STRIP" ++ fi + fi +- +- +-enable_dlopen=no +-enable_win32_dll=no +- +-# Check whether --enable-libtool-lock or --disable-libtool-lock was given. +-if test "${enable_libtool_lock+set}" = set; then +- enableval="$enable_libtool_lock" +- +-fi; +-test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes +- +-# Some flags need to be propagated to the compiler or linker for good +-# libtool support. +-case $host in +-*-*-irix6*) +- # Find out which ABI we are using. +- echo '#line 4894 "configure"' > conftest.$ac_ext +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 ++# Provide some information about the compiler. ++echo "$as_me:$LINENO: checking for C++ compiler version" >&5 ++ac_compiler=`set X $ac_compile; echo $2` ++{ (ac_try="$ac_compiler --version >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler --version >&5") 2>&5 + ac_status=$? + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- case `/usr/bin/file conftest.$ac_objext` in +- *32-bit*) +- LD="${LD-ld} -32" +- ;; +- *N32*) +- LD="${LD-ld} -n32" +- ;; +- *64-bit*) +- LD="${LD-ld} -64" +- ;; +- esac +- fi +- rm -rf conftest* +- ;; ++ (exit $ac_status); } ++{ (ac_try="$ac_compiler -v >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -v >&5") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++{ (ac_try="$ac_compiler -V >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -V >&5") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } + +-*-*-sco3.2v5*) +- # On SCO OpenServer 5, we need -belf to get full-featured binaries. +- SAVE_CFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS -belf" +- echo "$as_me:$LINENO: checking whether the C compiler needs -belf" >&5 +-echo $ECHO_N "checking whether the C compiler needs -belf... $ECHO_C" >&6 +-if test "${lt_cv_cc_needs_belf+set}" = set; then ++{ echo "$as_me:$LINENO: checking whether we are using the GNU C++ compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU C++ compiler... $ECHO_C" >&6; } ++if test "${ac_cv_cxx_compiler_gnu+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- +- +- ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu +- +- cat >conftest.$ac_ext <<_ACEOF ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext +@@ -4939,335 +5639,96 @@ + int + main () + { ++#ifndef __GNUC__ ++ choke me ++#endif + + ; + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- lt_cv_cc_needs_belf=yes ++ (exit $ac_status); } && { ++ test -z "$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_compiler_gnu=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-lt_cv_cc_needs_belf=no ++ ac_compiler_gnu=no + fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +- ac_ext=c +-ac_cpp='$CPP $CPPFLAGS' +-ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' +-ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' +-ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ac_cv_cxx_compiler_gnu=$ac_compiler_gnu + + fi +-echo "$as_me:$LINENO: result: $lt_cv_cc_needs_belf" >&5 +-echo "${ECHO_T}$lt_cv_cc_needs_belf" >&6 +- if test x"$lt_cv_cc_needs_belf" != x"yes"; then +- # this is probably gcc 2.8.0, egcs 1.0 or newer; no need for -belf +- CFLAGS="$SAVE_CFLAGS" +- fi +- ;; ++{ echo "$as_me:$LINENO: result: $ac_cv_cxx_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_cxx_compiler_gnu" >&6; } ++GXX=`test $ac_compiler_gnu = yes && echo yes` ++ac_test_CXXFLAGS=${CXXFLAGS+set} ++ac_save_CXXFLAGS=$CXXFLAGS ++{ echo "$as_me:$LINENO: checking whether $CXX accepts -g" >&5 ++echo $ECHO_N "checking whether $CXX accepts -g... $ECHO_C" >&6; } ++if test "${ac_cv_prog_cxx_g+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_save_cxx_werror_flag=$ac_cxx_werror_flag ++ ac_cxx_werror_flag=yes ++ ac_cv_prog_cxx_g=no ++ CXXFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ + ++int ++main () ++{ + ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; + esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_prog_cxx_g=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +-# Sed substitution that helps us do robust quoting. It backslashifies +-# metacharacters that are still active within double-quoted strings. +-Xsed='sed -e s/^X//' +-sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' +- +-# Same as above, but do not quote variable references. +-double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' +- +-# Sed substitution to delay expansion of an escaped shell variable in a +-# double_quote_subst'ed string. +-delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' +- +-# Constants: +-rm="rm -f" +- +-# Global variables: +-default_ofile=libtool +-can_build_shared=yes +- +-# All known linkers require a `.a' archive for static linking (except M$VC, +-# which needs '.lib'). +-libext=a +-ltmain="$ac_aux_dir/ltmain.sh" +-ofile="$default_ofile" +-with_gnu_ld="$lt_cv_prog_gnu_ld" +-need_locks="$enable_libtool_lock" +- +-old_CC="$CC" +-old_CFLAGS="$CFLAGS" +- +-# Set sane defaults for various variables +-test -z "$AR" && AR=ar +-test -z "$AR_FLAGS" && AR_FLAGS=cru +-test -z "$AS" && AS=as +-test -z "$CC" && CC=cc +-test -z "$DLLTOOL" && DLLTOOL=dlltool +-test -z "$LD" && LD=ld +-test -z "$LN_S" && LN_S="ln -s" +-test -z "$MAGIC_CMD" && MAGIC_CMD=file +-test -z "$NM" && NM=nm +-test -z "$OBJDUMP" && OBJDUMP=objdump +-test -z "$RANLIB" && RANLIB=: +-test -z "$STRIP" && STRIP=: +-test -z "$ac_objext" && ac_objext=o +- +-if test x"$host" != x"$build"; then +- ac_tool_prefix=${host_alias}- +-else +- ac_tool_prefix= +-fi +- +-# Transform linux* to *-*-linux-gnu*, to support old configure scripts. +-case $host_os in +-linux-gnu*) ;; +-linux*) host=`echo $host | sed 's/^\(.*-.*-linux\)\(.*\)$/\1-gnu\2/'` +-esac +- +-case $host_os in +-aix3*) +- # AIX sometimes has problems with the GCC collect2 program. For some +- # reason, if we set the COLLECT_NAMES environment variable, the problems +- # vanish in a puff of smoke. +- if test "X${COLLECT_NAMES+set}" != Xset; then +- COLLECT_NAMES= +- export COLLECT_NAMES +- fi +- ;; +-esac +- +-# Determine commands to create old-style static archives. +-old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' +-old_postinstall_cmds='chmod 644 $oldlib' +-old_postuninstall_cmds= +- +-if test -n "$RANLIB"; then +- case $host_os in +- openbsd*) +- old_postinstall_cmds="\$RANLIB -t \$oldlib~$old_postinstall_cmds" +- ;; +- *) +- old_postinstall_cmds="\$RANLIB \$oldlib~$old_postinstall_cmds" +- ;; +- esac +- old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" +-fi +- +-# Allow CC to be a program name with arguments. +-set dummy $CC +-compiler="$2" +- +-echo "$as_me:$LINENO: checking for objdir" >&5 +-echo $ECHO_N "checking for objdir... $ECHO_C" >&6 +-rm -f .libs 2>/dev/null +-mkdir .libs 2>/dev/null +-if test -d .libs; then +- objdir=.libs +-else +- # MS-DOS does not allow filenames that begin with a dot. +- objdir=_libs +-fi +-rmdir .libs 2>/dev/null +-echo "$as_me:$LINENO: result: $objdir" >&5 +-echo "${ECHO_T}$objdir" >&6 +- +- +- +-# Check whether --with-pic or --without-pic was given. +-if test "${with_pic+set}" = set; then +- withval="$with_pic" +- pic_mode="$withval" +-else +- pic_mode=default +-fi; +-test -z "$pic_mode" && pic_mode=default +- +-# We assume here that the value for lt_cv_prog_cc_pic will not be cached +-# in isolation, and that seeing it set (from the cache) indicates that +-# the associated values are set (in the cache) correctly too. +-echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 +-echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6 +-if test "${lt_cv_prog_cc_pic+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- lt_cv_prog_cc_pic= +- lt_cv_prog_cc_shlib= +- lt_cv_prog_cc_wl= +- lt_cv_prog_cc_static= +- lt_cv_prog_cc_no_builtin= +- lt_cv_prog_cc_can_build_shared=$can_build_shared +- +- if test "$GCC" = yes; then +- lt_cv_prog_cc_wl='-Wl,' +- lt_cv_prog_cc_static='-static' +- +- case $host_os in +- aix*) +- # Below there is a dirty hack to force normal static linking with -ldl +- # The problem is because libdl dynamically linked with both libc and +- # libC (AIX C++ library), which obviously doesn't included in libraries +- # list by gcc. This cause undefined symbols with -static flags. +- # This hack allows C programs to be linked with "-static -ldl", but +- # not sure about C++ programs. +- lt_cv_prog_cc_static="$lt_cv_prog_cc_static ${lt_cv_prog_cc_wl}-lC" +- ;; +- amigaos*) +- # FIXME: we need at least 68020 code to build shared libraries, but +- # adding the `-m68020' flag to GCC prevents building anything better, +- # like `-m68040'. +- lt_cv_prog_cc_pic='-m68020 -resident32 -malways-restore-a4' +- ;; +- beos* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) +- # PIC is the default for these OSes. +- ;; +- darwin* | rhapsody*) +- # PIC is the default on this platform +- # Common symbols not allowed in MH_DYLIB files +- lt_cv_prog_cc_pic='-fno-common' +- ;; +- cygwin* | mingw* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- lt_cv_prog_cc_pic='-DDLL_EXPORT' +- ;; +- sysv4*MP*) +- if test -d /usr/nec; then +- lt_cv_prog_cc_pic=-Kconform_pic +- fi +- ;; +- *) +- lt_cv_prog_cc_pic='-fPIC' +- ;; +- esac +- else +- # PORTME Check for PIC flags for the system compiler. +- case $host_os in +- aix3* | aix4* | aix5*) +- lt_cv_prog_cc_wl='-Wl,' +- # All AIX code is PIC. +- if test "$host_cpu" = ia64; then +- # AIX 5 now supports IA64 processor +- lt_cv_prog_cc_static='-Bstatic' +- else +- lt_cv_prog_cc_static='-bnso -bI:/lib/syscalls.exp' +- fi +- ;; +- +- hpux9* | hpux10* | hpux11*) +- # Is there a better lt_cv_prog_cc_static that works with the bundled CC? +- lt_cv_prog_cc_wl='-Wl,' +- lt_cv_prog_cc_static="${lt_cv_prog_cc_wl}-a ${lt_cv_prog_cc_wl}archive" +- lt_cv_prog_cc_pic='+Z' +- ;; +- +- irix5* | irix6* | nonstopux*) +- lt_cv_prog_cc_wl='-Wl,' +- lt_cv_prog_cc_static='-non_shared' +- # PIC (with -KPIC) is the default. +- ;; +- +- cygwin* | mingw* | pw32* | os2*) +- # This hack is so that the source file can tell whether it is being +- # built for inclusion in a dll (and should export symbols for example). +- lt_cv_prog_cc_pic='-DDLL_EXPORT' +- ;; +- +- newsos6) +- lt_cv_prog_cc_pic='-KPIC' +- lt_cv_prog_cc_static='-Bstatic' +- ;; +- +- osf3* | osf4* | osf5*) +- # All OSF/1 code is PIC. +- lt_cv_prog_cc_wl='-Wl,' +- lt_cv_prog_cc_static='-non_shared' +- ;; +- +- sco3.2v5*) +- lt_cv_prog_cc_pic='-Kpic' +- lt_cv_prog_cc_static='-dn' +- lt_cv_prog_cc_shlib='-belf' +- ;; +- +- solaris*) +- lt_cv_prog_cc_pic='-KPIC' +- lt_cv_prog_cc_static='-Bstatic' +- lt_cv_prog_cc_wl='-Wl,' +- ;; +- +- sunos4*) +- lt_cv_prog_cc_pic='-PIC' +- lt_cv_prog_cc_static='-Bstatic' +- lt_cv_prog_cc_wl='-Qoption ld ' +- ;; +- +- sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) +- lt_cv_prog_cc_pic='-KPIC' +- lt_cv_prog_cc_static='-Bstatic' +- lt_cv_prog_cc_wl='-Wl,' +- ;; +- +- uts4*) +- lt_cv_prog_cc_pic='-pic' +- lt_cv_prog_cc_static='-Bstatic' +- ;; +- +- sysv4*MP*) +- if test -d /usr/nec ;then +- lt_cv_prog_cc_pic='-Kconform_pic' +- lt_cv_prog_cc_static='-Bstatic' +- fi +- ;; +- +- *) +- lt_cv_prog_cc_can_build_shared=no +- ;; +- esac +- fi +- +-fi +- +-if test -z "$lt_cv_prog_cc_pic"; then +- echo "$as_me:$LINENO: result: none" >&5 +-echo "${ECHO_T}none" >&6 +-else +- echo "$as_me:$LINENO: result: $lt_cv_prog_cc_pic" >&5 +-echo "${ECHO_T}$lt_cv_prog_cc_pic" >&6 +- +- # Check to make sure the pic_flag actually works. +- echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_cv_prog_cc_pic works" >&5 +-echo $ECHO_N "checking if $compiler PIC flag $lt_cv_prog_cc_pic works... $ECHO_C" >&6 +- if test "${lt_cv_prog_cc_pic_works+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- save_CFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS $lt_cv_prog_cc_pic -DPIC" +- cat >conftest.$ac_ext <<_ACEOF ++ CXXFLAGS="" ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext +@@ -5283,87 +5744,30 @@ + } + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- case $host_os in +- hpux9* | hpux10* | hpux11*) +- # On HP-UX, both CC and GCC only warn that PIC is supported... then +- # they create non-PIC objects. So, if there were any warnings, we +- # assume that PIC is not supported. +- if test -s conftest.err; then +- lt_cv_prog_cc_pic_works=no +- else +- lt_cv_prog_cc_pic_works=yes +- fi +- ;; +- *) +- lt_cv_prog_cc_pic_works=yes +- ;; +- esac +- ++ (exit $ac_status); } && { ++ test -z "$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ : + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +- lt_cv_prog_cc_pic_works=no +- +-fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +- CFLAGS="$save_CFLAGS" +- +-fi +- +- +- if test "X$lt_cv_prog_cc_pic_works" = Xno; then +- lt_cv_prog_cc_pic= +- lt_cv_prog_cc_can_build_shared=no +- else +- lt_cv_prog_cc_pic=" $lt_cv_prog_cc_pic" +- fi +- +- echo "$as_me:$LINENO: result: $lt_cv_prog_cc_pic_works" >&5 +-echo "${ECHO_T}$lt_cv_prog_cc_pic_works" >&6 +-fi +- +-# Check for any special shared library compilation flags. +-if test -n "$lt_cv_prog_cc_shlib"; then +- { echo "$as_me:$LINENO: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&5 +-echo "$as_me: WARNING: \`$CC' requires \`$lt_cv_prog_cc_shlib' to build shared libraries" >&2;} +- if echo "$old_CC $old_CFLAGS " | egrep -e "[ ]$lt_cv_prog_cc_shlib[ ]" >/dev/null; then : +- else +- { echo "$as_me:$LINENO: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&5 +-echo "$as_me: WARNING: add \`$lt_cv_prog_cc_shlib' to the CC or CFLAGS env variable and reconfigure" >&2;} +- lt_cv_prog_cc_can_build_shared=no +- fi +-fi +- +-echo "$as_me:$LINENO: checking if $compiler static flag $lt_cv_prog_cc_static works" >&5 +-echo $ECHO_N "checking if $compiler static flag $lt_cv_prog_cc_static works... $ECHO_C" >&6 +-if test "${lt_cv_prog_cc_static_works+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- lt_cv_prog_cc_static_works=no +- save_LDFLAGS="$LDFLAGS" +- LDFLAGS="$LDFLAGS $lt_cv_prog_cc_static" +- cat >conftest.$ac_ext <<_ACEOF ++ ac_cxx_werror_flag=$ac_save_cxx_werror_flag ++ CXXFLAGS="-g" ++ cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext +@@ -5378,1108 +5782,12251 @@ + return 0; + } + _ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- lt_cv_prog_cc_static_works=yes ++ (exit $ac_status); } && { ++ test -z "$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_prog_cxx_g=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +- LDFLAGS="$save_LDFLAGS" + + fi + ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi + +-# Belt *and* braces to stop my trousers falling down: +-test "X$lt_cv_prog_cc_static_works" = Xno && lt_cv_prog_cc_static= +-echo "$as_me:$LINENO: result: $lt_cv_prog_cc_static_works" >&5 +-echo "${ECHO_T}$lt_cv_prog_cc_static_works" >&6 ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++fi + +-pic_flag="$lt_cv_prog_cc_pic" +-special_shlib_compile_flags="$lt_cv_prog_cc_shlib" +-wl="$lt_cv_prog_cc_wl" +-link_static_flag="$lt_cv_prog_cc_static" +-no_builtin_flag="$lt_cv_prog_cc_no_builtin" +-can_build_shared="$lt_cv_prog_cc_can_build_shared" ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ ac_cxx_werror_flag=$ac_save_cxx_werror_flag ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_cxx_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_cxx_g" >&6; } ++if test "$ac_test_CXXFLAGS" = set; then ++ CXXFLAGS=$ac_save_CXXFLAGS ++elif test $ac_cv_prog_cxx_g = yes; then ++ if test "$GXX" = yes; then ++ CXXFLAGS="-g -O2" ++ else ++ CXXFLAGS="-g" ++ fi ++else ++ if test "$GXX" = yes; then ++ CXXFLAGS="-O2" ++ else ++ CXXFLAGS= ++ fi ++fi ++ac_ext=cpp ++ac_cpp='$CXXCPP $CPPFLAGS' ++ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + ++depcc="$CXX" am_compiler_list= + +-# Check to see if options -o and -c are simultaneously supported by compiler +-echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 +-echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6 +-if test "${lt_cv_compiler_c_o+set}" = set; then ++{ echo "$as_me:$LINENO: checking dependency style of $depcc" >&5 ++echo $ECHO_N "checking dependency style of $depcc... $ECHO_C" >&6; } ++if test "${am_cv_CXX_dependencies_compiler_type+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else ++ if test -z "$AMDEP_TRUE" && test -f "$am_depcomp"; then ++ # We make a subdir and do the tests there. Otherwise we can end up ++ # making bogus files that we don't know about and never remove. For ++ # instance it was reported that on HP-UX the gcc test will end up ++ # making a dummy file named `D' -- because `-MD' means `put the output ++ # in D'. ++ mkdir conftest.dir ++ # Copy depcomp to subdir because otherwise we won't find it if we're ++ # using a relative directory. ++ cp "$am_depcomp" conftest.dir ++ cd conftest.dir ++ # We will build objects and dependencies in a subdirectory because ++ # it helps to detect inapplicable dependency modes. For instance ++ # both Tru64's cc and ICC support -MD to output dependencies as a ++ # side effect of compilation, but ICC will put the dependencies in ++ # the current directory while Tru64 will put them in the object ++ # directory. ++ mkdir sub ++ ++ am_cv_CXX_dependencies_compiler_type=none ++ if test "$am_compiler_list" = ""; then ++ am_compiler_list=`sed -n 's/^#*\([a-zA-Z0-9]*\))$/\1/p' < ./depcomp` ++ fi ++ for depmode in $am_compiler_list; do ++ # Setup a source with many dependencies, because some compilers ++ # like to wrap large dependency lists on column 80 (with \), and ++ # we should not choose a depcomp mode which is confused by this. ++ # ++ # We need to recreate these files for each test, as the compiler may ++ # overwrite some of them when testing with obscure command lines. ++ # This happens at least with the AIX C compiler. ++ : > sub/conftest.c ++ for i in 1 2 3 4 5 6; do ++ echo '#include "conftst'$i'.h"' >> sub/conftest.c ++ # Using `: > sub/conftst$i.h' creates only sub/conftst1.h with ++ # Solaris 8's {/usr,}/bin/sh. ++ touch sub/conftst$i.h ++ done ++ echo "${am__include} ${am__quote}sub/conftest.Po${am__quote}" > confmf + +-$rm -r conftest 2>/dev/null +-mkdir conftest +-cd conftest +-echo "int some_variable = 0;" > conftest.$ac_ext +-mkdir out +-# According to Tom Tromey, Ian Lance Taylor reported there are C compilers +-# that will create temporary files in the current directory regardless of +-# the output directory. Thus, making CWD read-only will cause this test +-# to fail, enabling locking or at least warning the user not to do parallel +-# builds. +-chmod -w . +-save_CFLAGS="$CFLAGS" +-CFLAGS="$CFLAGS -o out/conftest2.$ac_objext" +-compiler_c_o=no +-if { (eval echo configure:5449: \"$ac_compile\") 1>&5; (eval $ac_compile) 2>out/conftest.err; } && test -s out/conftest2.$ac_objext; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test -s out/conftest.err; then +- lt_cv_compiler_c_o=no +- else +- lt_cv_compiler_c_o=yes +- fi ++ case $depmode in ++ nosideeffect) ++ # after this tag, mechanisms are not by side-effect, so they'll ++ # only be used when explicitly requested ++ if test "x$enable_dependency_tracking" = xyes; then ++ continue ++ else ++ break ++ fi ++ ;; ++ none) break ;; ++ esac ++ # We check with `-c' and `-o' for the sake of the "dashmstdout" ++ # mode. It turns out that the SunPro C++ compiler does not properly ++ # handle `-M -o', and we need to detect this. ++ if depmode=$depmode \ ++ source=sub/conftest.c object=sub/conftest.${OBJEXT-o} \ ++ depfile=sub/conftest.Po tmpdepfile=sub/conftest.TPo \ ++ $SHELL ./depcomp $depcc -c -o sub/conftest.${OBJEXT-o} sub/conftest.c \ ++ >/dev/null 2>conftest.err && ++ grep sub/conftst6.h sub/conftest.Po > /dev/null 2>&1 && ++ grep sub/conftest.${OBJEXT-o} sub/conftest.Po > /dev/null 2>&1 && ++ ${MAKE-make} -s -f confmf > /dev/null 2>&1; then ++ # icc doesn't choke on unknown options, it will just issue warnings ++ # or remarks (even with -Werror). So we grep stderr for any message ++ # that says an option was ignored or not supported. ++ # When given -MP, icc 7.0 and 7.1 complain thusly: ++ # icc: Command line warning: ignoring option '-M'; no argument required ++ # The diagnosis changed in icc 8.0: ++ # icc: Command line remark: option '-MP' not supported ++ if (grep 'ignoring option' conftest.err || ++ grep 'not supported' conftest.err) >/dev/null 2>&1; then :; else ++ am_cv_CXX_dependencies_compiler_type=$depmode ++ break ++ fi ++ fi ++ done ++ ++ cd .. ++ rm -rf conftest.dir + else +- # Append any errors to the config.log. +- cat out/conftest.err 1>&5 +- lt_cv_compiler_c_o=no ++ am_cv_CXX_dependencies_compiler_type=none + fi +-CFLAGS="$save_CFLAGS" +-chmod u+w . +-$rm conftest* out/* +-rmdir out +-cd .. +-rmdir conftest +-$rm -r conftest 2>/dev/null + + fi ++{ echo "$as_me:$LINENO: result: $am_cv_CXX_dependencies_compiler_type" >&5 ++echo "${ECHO_T}$am_cv_CXX_dependencies_compiler_type" >&6; } ++CXXDEPMODE=depmode=$am_cv_CXX_dependencies_compiler_type + +-compiler_c_o=$lt_cv_compiler_c_o +-echo "$as_me:$LINENO: result: $compiler_c_o" >&5 +-echo "${ECHO_T}$compiler_c_o" >&6 + +-if test x"$compiler_c_o" = x"yes"; then +- # Check to see if we can write to a .lo +- echo "$as_me:$LINENO: checking if $compiler supports -c -o file.lo" >&5 +-echo $ECHO_N "checking if $compiler supports -c -o file.lo... $ECHO_C" >&6 +- if test "${lt_cv_compiler_o_lo+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 ++ ++if ++ test "x$enable_dependency_tracking" != xno \ ++ && test "$am_cv_CXX_dependencies_compiler_type" = gcc3; then ++ am__fastdepCXX_TRUE= ++ am__fastdepCXX_FALSE='#' + else ++ am__fastdepCXX_TRUE='#' ++ am__fastdepCXX_FALSE= ++fi + +- lt_cv_compiler_o_lo=no +- save_CFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS -c -o conftest.lo" +- save_objext="$ac_objext" +- ac_objext=lo +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ + +-int +-main () +-{ +-int some_variable = 0; +- ; +- return 0; +-} ++ ++ ++if test -n "$CXX" && ( test "X$CXX" != "Xno" && ++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || ++ (test "X$CXX" != "Xg++"))) ; then ++ ac_ext=cpp ++ac_cpp='$CXXCPP $CPPFLAGS' ++ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_cxx_compiler_gnu ++{ echo "$as_me:$LINENO: checking how to run the C++ preprocessor" >&5 ++echo $ECHO_N "checking how to run the C++ preprocessor... $ECHO_C" >&6; } ++if test -z "$CXXCPP"; then ++ if test "${ac_cv_prog_CXXCPP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # Double quotes because CXXCPP needs to be expanded ++ for CXXCPP in "$CXX -E" "/lib/cpp" ++ do ++ ac_preproc_ok=false ++for ac_cxx_preproc_warn_flag in '' yes ++do ++ # Use a header file that comes with gcc, so configuring glibc ++ # with a fresh cross-compiler works. ++ # Prefer to if __STDC__ is defined, since ++ # exists even on freestanding compilers. ++ # On the NeXT, cc -E runs the code through the compiler's parser, ++ # not just through cpp. "Syntax error" is here to catch this case. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ + _ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ Syntax error ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ # Broken: fails on valid input. ++continue ++fi ++ ++rm -f conftest.err conftest.$ac_ext ++ ++ # OK, works on sane cases. Now check whether nonexistent headers ++ # can be detected and how. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test -s conftest.err; then +- lt_cv_compiler_o_lo=no +- else +- lt_cv_compiler_o_lo=yes +- fi +- ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ # Broken: success on invalid input. ++continue + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ # Passes both tests. ++ac_preproc_ok=: ++break + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +- ac_objext="$save_objext" +- CFLAGS="$save_CFLAGS" + +-fi ++rm -f conftest.err conftest.$ac_ext + +- compiler_o_lo=$lt_cv_compiler_o_lo +- echo "$as_me:$LINENO: result: $compiler_o_lo" >&5 +-echo "${ECHO_T}$compiler_o_lo" >&6 +-else +- compiler_o_lo=no ++done ++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ++rm -f conftest.err conftest.$ac_ext ++if $ac_preproc_ok; then ++ break + fi + +-# Check to see if we can do hard links to lock some files if needed +-hard_links="nottested" +-if test "$compiler_c_o" = no && test "$need_locks" != no; then +- # do not overwrite the value of need_locks provided by the user +- echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 +-echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6 +- hard_links=yes +- $rm conftest* +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- touch conftest.a +- ln conftest.a conftest.b 2>&5 || hard_links=no +- ln conftest.a conftest.b 2>/dev/null && hard_links=no +- echo "$as_me:$LINENO: result: $hard_links" >&5 +-echo "${ECHO_T}$hard_links" >&6 +- if test "$hard_links" = no; then +- { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 +-echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} +- need_locks=warn +- fi ++ done ++ ac_cv_prog_CXXCPP=$CXXCPP ++ ++fi ++ CXXCPP=$ac_cv_prog_CXXCPP + else +- need_locks=no ++ ac_cv_prog_CXXCPP=$CXXCPP + fi +- +-if test "$GCC" = yes; then +- # Check to see if options -fno-rtti -fno-exceptions are supported by compiler +- echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 +-echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6 +- echo "int some_variable = 0;" > conftest.$ac_ext +- save_CFLAGS="$CFLAGS" +- CFLAGS="$CFLAGS -fno-rtti -fno-exceptions -c conftest.$ac_ext" +- compiler_rtti_exceptions=no ++{ echo "$as_me:$LINENO: result: $CXXCPP" >&5 ++echo "${ECHO_T}$CXXCPP" >&6; } ++ac_preproc_ok=false ++for ac_cxx_preproc_warn_flag in '' yes ++do ++ # Use a header file that comes with gcc, so configuring glibc ++ # with a fresh cross-compiler works. ++ # Prefer to if __STDC__ is defined, since ++ # exists even on freestanding compilers. ++ # On the NeXT, cc -E runs the code through the compiler's parser, ++ # not just through cpp. "Syntax error" is here to catch this case. + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF + cat confdefs.h >>conftest.$ac_ext + cat >>conftest.$ac_ext <<_ACEOF + /* end confdefs.h. */ +- +-int +-main () +-{ +-int some_variable = 0; +- ; +- return 0; +-} ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ Syntax error + _ACEOF +-rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ : ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ # Broken: fails on valid input. ++continue ++fi ++ ++rm -f conftest.err conftest.$ac_ext ++ ++ # OK, works on sane cases. Now check whether nonexistent headers ++ # can be detected and how. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++#include ++_ACEOF ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- # The compiler can only warn and ignore the option if not recognized +- # So say no if there are warnings +- if test -s conftest.err; then +- compiler_rtti_exceptions=no +- else +- compiler_rtti_exceptions=yes +- fi +- ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_cxx_preproc_warn_flag$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ }; then ++ # Broken: success on invalid input. ++continue + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + ++ # Passes both tests. ++ac_preproc_ok=: ++break + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +- CFLAGS="$save_CFLAGS" +- echo "$as_me:$LINENO: result: $compiler_rtti_exceptions" >&5 +-echo "${ECHO_T}$compiler_rtti_exceptions" >&6 + +- if test "$compiler_rtti_exceptions" = "yes"; then +- no_builtin_flag=' -fno-builtin -fno-rtti -fno-exceptions' +- else +- no_builtin_flag=' -fno-builtin' +- fi ++rm -f conftest.err conftest.$ac_ext ++ ++done ++# Because of `break', _AC_PREPROC_IFELSE's cleaning code was skipped. ++rm -f conftest.err conftest.$ac_ext ++if $ac_preproc_ok; then ++ : ++else ++ { { echo "$as_me:$LINENO: error: C++ preprocessor \"$CXXCPP\" fails sanity check ++See \`config.log' for more details." >&5 ++echo "$as_me: error: C++ preprocessor \"$CXXCPP\" fails sanity check ++See \`config.log' for more details." >&2;} ++ { (exit 1); exit 1; }; } + fi + +-# See if the linker supports building shared libraries. +-echo "$as_me:$LINENO: checking whether the linker ($LD) supports shared libraries" >&5 +-echo $ECHO_N "checking whether the linker ($LD) supports shared libraries... $ECHO_C" >&6 ++ac_ext=cpp ++ac_cpp='$CXXCPP $CPPFLAGS' ++ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_cxx_compiler_gnu + +-allow_undefined_flag= +-no_undefined_flag= +-need_lib_prefix=unknown +-need_version=unknown +-# when you set need_version to no, make sure it does not cause -set_version +-# flags to be left without arguments +-archive_cmds= +-archive_expsym_cmds= +-old_archive_from_new_cmds= +-old_archive_from_expsyms_cmds= +-export_dynamic_flag_spec= +-whole_archive_flag_spec= +-thread_safe_flag_spec= +-hardcode_into_libs=no +-hardcode_libdir_flag_spec= +-hardcode_libdir_separator= +-hardcode_direct=no +-hardcode_minus_L=no +-hardcode_shlibpath_var=unsupported +-runpath_var= +-link_all_deplibs=unknown +-always_export_symbols=no +-export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | sed '\''s/.* //'\'' | sort | uniq > $export_symbols' +-# include_expsyms should be a list of space-separated symbols to be *always* +-# included in the symbol list +-include_expsyms= +-# exclude_expsyms can be an egrep regular expression of symbols to exclude +-# it will be wrapped by ` (' and `)$', so one must not match beginning or +-# end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', +-# as well as any symbol that contains `d'. +-exclude_expsyms="_GLOBAL_OFFSET_TABLE_" +-# Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out +-# platforms (ab)use it in PIC code, but their linkers get confused if +-# the symbol is explicitly referenced. Since portable code cannot +-# rely on this symbol name, it's probably fine to never include it in +-# preloaded symbol tables. +-extract_expsyms_cmds= ++fi + +-case $host_os in +-cygwin* | mingw* | pw32*) +- # FIXME: the MSVC++ port hasn't been tested in a loooong time +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- if test "$GCC" != yes; then +- with_gnu_ld=no +- fi +- ;; +-openbsd*) +- with_gnu_ld=no +- ;; +-esac + +-ld_shlibs=yes +-if test "$with_gnu_ld" = yes; then +- # If archive_cmds runs LD, not CC, wlarc should be empty +- wlarc='${wl}' ++ac_ext=f ++ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' ++ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_f77_compiler_gnu ++if test -n "$ac_tool_prefix"; then ++ for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn ++ do ++ # Extract the first word of "$ac_tool_prefix$ac_prog", so it can be a program name with args. ++set dummy $ac_tool_prefix$ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_F77+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$F77"; then ++ ac_cv_prog_F77="$F77" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_F77="$ac_tool_prefix$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS + +- # See if GNU ld supports shared libraries. +- case $host_os in +- aix3* | aix4* | aix5*) +- # On AIX, the GNU linker is very broken +- # Note:Check GNU linker on AIX 5-IA64 when/if it becomes available. +- ld_shlibs=no +- cat <&2 ++fi ++fi ++F77=$ac_cv_prog_F77 ++if test -n "$F77"; then ++ { echo "$as_me:$LINENO: result: $F77" >&5 ++echo "${ECHO_T}$F77" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi + +-*** Warning: the GNU linker, at least up to release 2.9.1, is reported +-*** to be unable to reliably create shared libraries on AIX. +-*** Therefore, libtool is disabling shared libraries support. If you +-*** really care for shared libraries, you may want to modify your PATH +-*** so that a non-GNU linker is found, and then restart. + +-EOF +- ;; ++ test -n "$F77" && break ++ done ++fi ++if test -z "$F77"; then ++ ac_ct_F77=$F77 ++ for ac_prog in g77 xlf f77 frt pgf77 cf77 fort77 fl32 af77 xlf90 f90 pgf90 pghpf epcf90 gfortran g95 xlf95 f95 fort ifort ifc efc pgf95 lf95 ftn ++do ++ # Extract the first word of "$ac_prog", so it can be a program name with args. ++set dummy $ac_prog; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_F77+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_F77"; then ++ ac_cv_prog_ac_ct_F77="$ac_ct_F77" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_F77="$ac_prog" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS + +- amigaos*) +- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_minus_L=yes +- +- # Samuel A. Falvo II reports +- # that the semantics of dynamic libraries on AmigaOS, at least up +- # to version 4, is to share data among multiple programs linked +- # with the same dynamic library. Since this doesn't match the +- # behavior of shared libraries on other platforms, we can use +- # them. +- ld_shlibs=no +- ;; ++fi ++fi ++ac_ct_F77=$ac_cv_prog_ac_ct_F77 ++if test -n "$ac_ct_F77"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_F77" >&5 ++echo "${ECHO_T}$ac_ct_F77" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi + +- beos*) +- if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then +- allow_undefined_flag=unsupported +- # Joseph Beckenbach says some releases of gcc +- # support --undefined. This deserves some investigation. FIXME +- archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- else +- ld_shlibs=no +- fi +- ;; + +- cygwin* | mingw* | pw32*) +- # hardcode_libdir_flag_spec is actually meaningless, as there is +- # no search path for DLLs. +- hardcode_libdir_flag_spec='-L$libdir' +- allow_undefined_flag=unsupported +- always_export_symbols=yes +- +- extract_expsyms_cmds='test -f $output_objdir/impgen.c || \ +- sed -e "/^# \/\* impgen\.c starts here \*\//,/^# \/\* impgen.c ends here \*\// { s/^# //;s/^# *$//; p; }" -e d < $''0 > $output_objdir/impgen.c~ +- test -f $output_objdir/impgen.exe || (cd $output_objdir && \ +- if test "x$HOST_CC" != "x" ; then $HOST_CC -o impgen impgen.c ; \ +- else $CC -o impgen impgen.c ; fi)~ +- $output_objdir/impgen $dir/$soroot > $output_objdir/$soname-def' +- +- old_archive_from_expsyms_cmds='$DLLTOOL --as=$AS --dllname $soname --def $output_objdir/$soname-def --output-lib $output_objdir/$newlib' +- +- # cygwin and mingw dlls have different entry points and sets of symbols +- # to exclude. +- # FIXME: what about values for MSVC? +- dll_entry=__cygwin_dll_entry@12 +- dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12~ +- case $host_os in +- mingw*) +- # mingw values +- dll_entry=_DllMainCRTStartup@12 +- dll_exclude_symbols=DllMain@12,DllMainCRTStartup@12,DllEntryPoint@12~ +- ;; +- esac ++ test -n "$ac_ct_F77" && break ++done + +- # mingw and cygwin differ, and it's simplest to just exclude the union +- # of the two symbol sets. +- dll_exclude_symbols=DllMain@12,_cygwin_dll_entry@12,_cygwin_noncygwin_dll_entry@12,DllMainCRTStartup@12,DllEntryPoint@12 +- +- # recent cygwin and mingw systems supply a stub DllMain which the user +- # can override, but on older systems we have to supply one (in ltdll.c) +- if test "x$lt_cv_need_dllmain" = "xyes"; then +- ltdll_obj='$output_objdir/$soname-ltdll.'"$ac_objext " +- ltdll_cmds='test -f $output_objdir/$soname-ltdll.c || sed -e "/^# \/\* ltdll\.c starts here \*\//,/^# \/\* ltdll.c ends here \*\// { s/^# //; p; }" -e d < $''0 > $output_objdir/$soname-ltdll.c~ +- test -f $output_objdir/$soname-ltdll.$ac_objext || (cd $output_objdir && $CC -c $soname-ltdll.c)~' +- else +- ltdll_obj= +- ltdll_cmds= +- fi ++ if test "x$ac_ct_F77" = x; then ++ F77="" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ F77=$ac_ct_F77 ++ fi ++fi + +- # Extract the symbol export list from an `--export-all' def file, +- # then regenerate the def file from the symbol export list, so that +- # the compiled dll only exports the symbol export list. +- # Be careful not to strip the DATA tag left be newer dlltools. +- export_symbols_cmds="$ltdll_cmds"' +- $DLLTOOL --export-all --exclude-symbols '$dll_exclude_symbols' --output-def $output_objdir/$soname-def '$ltdll_obj'$libobjs $convenience~ +- sed -e "1,/EXPORTS/d" -e "s/ @ [0-9]*//" -e "s/ *;.*$//" < $output_objdir/$soname-def > $export_symbols' +- +- # If the export-symbols file already is a .def file (1st line +- # is EXPORTS), use it as is. +- # If DATA tags from a recent dlltool are present, honour them! +- archive_expsym_cmds='if test "x`sed 1q $export_symbols`" = xEXPORTS; then +- cp $export_symbols $output_objdir/$soname-def; +- else +- echo EXPORTS > $output_objdir/$soname-def; +- _lt_hint=1; +- cat $export_symbols | while read symbol; do +- set dummy \$symbol; +- case \$# in +- 2) echo " \$2 @ \$_lt_hint ; " >> $output_objdir/$soname-def;; +- 4) echo " \$2 \$3 \$4 ; " >> $output_objdir/$soname-def; _lt_hint=`expr \$_lt_hint - 1`;; +- *) echo " \$2 @ \$_lt_hint \$3 ; " >> $output_objdir/$soname-def;; +- esac; +- _lt_hint=`expr 1 + \$_lt_hint`; +- done; +- fi~ +- '"$ltdll_cmds"' +- $CC -Wl,--base-file,$output_objdir/$soname-base '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ +- $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp~ +- $CC -Wl,--base-file,$output_objdir/$soname-base $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags~ +- $DLLTOOL --as=$AS --dllname $soname --exclude-symbols '$dll_exclude_symbols' --def $output_objdir/$soname-def --base-file $output_objdir/$soname-base --output-exp $output_objdir/$soname-exp --output-lib $output_objdir/$libname.dll.a~ +- $CC $output_objdir/$soname-exp '$lt_cv_cc_dll_switch' -Wl,-e,'$dll_entry' -o $output_objdir/$soname '$ltdll_obj'$libobjs $deplibs $compiler_flags' +- ;; + +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' +- wlarc= +- else +- archive_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared -nodefaultlibs $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- fi +- ;; +- +- solaris* | sysv5*) +- if $LD -v 2>&1 | egrep 'BFD 2\.8' > /dev/null; then +- ld_shlibs=no +- cat <&2 ++# Provide some information about the compiler. ++echo "$as_me:$LINENO: checking for Fortran 77 compiler version" >&5 ++ac_compiler=`set X $ac_compile; echo $2` ++{ (ac_try="$ac_compiler --version >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler --version >&5") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++{ (ac_try="$ac_compiler -v >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -v >&5") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++{ (ac_try="$ac_compiler -V >&5" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compiler -V >&5") 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++rm -f a.out + +-*** Warning: The releases 2.8.* of the GNU linker cannot reliably +-*** create shared libraries on Solaris systems. Therefore, libtool +-*** is disabling shared libraries support. We urge you to upgrade GNU +-*** binutils to release 2.9.1 or newer. Another option is to modify +-*** your PATH or compiler configuration so that the native linker is +-*** used, and then restart. ++# If we don't use `.F' as extension, the preprocessor is not run on the ++# input file. (Note that this only needs to work for GNU compilers.) ++ac_save_ext=$ac_ext ++ac_ext=F ++{ echo "$as_me:$LINENO: checking whether we are using the GNU Fortran 77 compiler" >&5 ++echo $ECHO_N "checking whether we are using the GNU Fortran 77 compiler... $ECHO_C" >&6; } ++if test "${ac_cv_f77_compiler_gnu+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++ program main ++#ifndef __GNUC__ ++ choke me ++#endif + +-EOF +- elif $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- ld_shlibs=no +- fi +- ;; ++ end ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_f77_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_compiler_gnu=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +- sunos4*) +- archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- wlarc= +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- ;; ++ ac_compiler_gnu=no ++fi + +- *) +- if $LD --help 2>&1 | egrep ': supported targets:.* elf' > /dev/null; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' +- archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' +- else +- ld_shlibs=no +- fi +- ;; +- esac ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++ac_cv_f77_compiler_gnu=$ac_compiler_gnu + +- if test "$ld_shlibs" = yes; then +- runpath_var=LD_RUN_PATH +- hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' +- export_dynamic_flag_spec='${wl}--export-dynamic' +- case $host_os in +- cygwin* | mingw* | pw32*) +- # dlltool doesn't understand --whole-archive et. al. +- whole_archive_flag_spec= +- ;; +- *) +- # ancient GNU ld didn't support --whole-archive et. al. +- if $LD --help 2>&1 | egrep 'no-whole-archive' > /dev/null; then +- whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' +- else +- whole_archive_flag_spec= +- fi +- ;; +- esac +- fi ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_f77_compiler_gnu" >&5 ++echo "${ECHO_T}$ac_cv_f77_compiler_gnu" >&6; } ++ac_ext=$ac_save_ext ++ac_test_FFLAGS=${FFLAGS+set} ++ac_save_FFLAGS=$FFLAGS ++FFLAGS= ++{ echo "$as_me:$LINENO: checking whether $F77 accepts -g" >&5 ++echo $ECHO_N "checking whether $F77 accepts -g... $ECHO_C" >&6; } ++if test "${ac_cv_prog_f77_g+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 + else +- # PORTME fill in a description of your system's linker (not GNU ld) +- case $host_os in +- aix3*) +- allow_undefined_flag=unsupported +- always_export_symbols=yes +- archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' +- # Note: this linker hardcodes the directories in LIBPATH if there +- # are no directories specified by -L. +- hardcode_minus_L=yes +- if test "$GCC" = yes && test -z "$link_static_flag"; then +- # Neither direct hardcoding nor static linking is supported with a +- # broken collect2. +- hardcode_direct=unsupported +- fi +- ;; ++ FFLAGS=-g ++cat >conftest.$ac_ext <<_ACEOF ++ program main + +- aix4* | aix5*) +- if test "$host_cpu" = ia64; then +- # On IA64, the linker does run time linking by default, so we don't +- # have to do anything special. +- aix_use_runtimelinking=no +- exp_sym_flag='-Bexport' +- no_entry_flag="" +- else +- aix_use_runtimelinking=no ++ end ++_ACEOF ++rm -f conftest.$ac_objext ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_f77_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then ++ ac_cv_prog_f77_g=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 + +- # Test if we are trying to use run time linking or normal +- # AIX style linking. If -brtl is somewhere in LDFLAGS, we +- # need to do runtime linking. +- case $host_os in aix4.[23]|aix4.[23].*|aix5*) +- for ld_flag in $LDFLAGS; do +- case $ld_flag in +- *-brtl*) +- aix_use_runtimelinking=yes +- break +- ;; +- esac +- done +- esac ++ ac_cv_prog_f77_g=no ++fi + +- exp_sym_flag='-bexport' +- no_entry_flag='-bnoentry' +- fi ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext + +- # When large executables or shared objects are built, AIX ld can +- # have problems creating the table of contents. If linking a library +- # or program results in "error TOC overflow" add -mminimal-toc to +- # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not +- # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_prog_f77_g" >&5 ++echo "${ECHO_T}$ac_cv_prog_f77_g" >&6; } ++if test "$ac_test_FFLAGS" = set; then ++ FFLAGS=$ac_save_FFLAGS ++elif test $ac_cv_prog_f77_g = yes; then ++ if test "x$ac_cv_f77_compiler_gnu" = xyes; then ++ FFLAGS="-g -O2" ++ else ++ FFLAGS="-g" ++ fi ++else ++ if test "x$ac_cv_f77_compiler_gnu" = xyes; then ++ FFLAGS="-O2" ++ else ++ FFLAGS= ++ fi ++fi + +- hardcode_direct=yes +- archive_cmds='' +- hardcode_libdir_separator=':' +- if test "$GCC" = yes; then +- case $host_os in aix4.[012]|aix4.[012].*) +- collect2name=`${CC} -print-prog-name=collect2` +- if test -f "$collect2name" && \ +- strings "$collect2name" | grep resolve_lib_name >/dev/null +- then +- # We have reworked collect2 +- hardcode_direct=yes +- else +- # We have old collect2 +- hardcode_direct=unsupported +- # It fails to find uninstalled libraries when the uninstalled +- # path is not listed in the libpath. Setting hardcode_minus_L +- # to unsupported forces relinking +- hardcode_minus_L=yes +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_libdir_separator= +- fi +- esac ++G77=`test $ac_compiler_gnu = yes && echo yes` ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + +- shared_flag='-shared' +- else +- # not using gcc +- if test "$host_cpu" = ia64; then +- shared_flag='${wl}-G' +- else +- if test "$aix_use_runtimelinking" = yes; then +- shared_flag='${wl}-G' +- else +- shared_flag='${wl}-bM:SRE' +- fi +- fi +- fi + +- # It seems that -bexpall can do strange things, so it is better to +- # generate a list of symbols to export. +- always_export_symbols=yes +- if test "$aix_use_runtimelinking" = yes; then +- # Warning - without using the other runtime loading flags (-brtl), +- # -berok will link without error, but may produce a broken library. +- allow_undefined_flag='-berok' +- hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:/usr/lib:/lib' +- archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols $shared_flag" +- else +- if test "$host_cpu" = ia64; then +- hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' +- allow_undefined_flag="-z nodefs" +- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname ${wl}-h$soname $libobjs $deplibs $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols" +- else +- hardcode_libdir_flag_spec='${wl}-bnolibpath ${wl}-blibpath:$libdir:/usr/lib:/lib' +- # Warning - without using the other run time loading flags, +- # -berok will link without error, but may produce a broken library. +- allow_undefined_flag='${wl}-berok' +- # This is a bit strange, but is similar to how AIX traditionally builds +- # it's shared libraries. +- archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs $compiler_flags ${allow_undefined_flag} '"\${wl}$no_entry_flag \${wl}$exp_sym_flag:\$export_symbols"' ~$AR -crlo $output_objdir/$libname$release.a $output_objdir/$soname' +- fi +- fi +- ;; + +- amigaos*) +- archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_minus_L=yes +- # see comment about different semantics on the GNU ld section +- ld_shlibs=no +- ;; ++# Autoconf 2.13's AC_OBJEXT and AC_EXEEXT macros only works for C compilers! + +- cygwin* | mingw* | pw32*) +- # When not using gcc, we currently assume that we are using +- # Microsoft Visual C++. +- # hardcode_libdir_flag_spec is actually meaningless, as there is +- # no search path for DLLs. +- hardcode_libdir_flag_spec=' ' +- allow_undefined_flag=unsupported +- # Tell ltmain to make .lib files, not .a files. +- libext=lib +- # FIXME: Setting linknames here is a bad hack. +- archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | sed -e '\''s/ -lc$//'\''` -link -dll~linknames=' +- # The linker will automatically build a .lib file if we build a DLL. +- old_archive_from_new_cmds='true' +- # FIXME: Should let the user specify the lib program. +- old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' +- fix_srcfile_path='`cygpath -w "$srcfile"`' +- ;; +- +- darwin* | rhapsody*) +- case "$host_os" in +- rhapsody* | darwin1.[012]) +- allow_undefined_flag='-undefined suppress' +- ;; +- *) # Darwin 1.3 on +- allow_undefined_flag='-flat_namespace -undefined suppress' +- ;; +- esac +- # FIXME: Relying on posixy $() will cause problems for +- # cross-compilation, but unfortunately the echo tests do not +- # yet detect zsh echo's removal of \ escapes. Also zsh mangles +- # `"' quotes if we put them in here... so don't! +- archive_cmds='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs && $CC $(test .$module = .yes && echo -bundle || echo -dynamiclib) $allow_undefined_flag -o $lib ${lib}-master.o $deplibs$linker_flags $(test .$module != .yes && echo -install_name $rpath/$soname $verstring)' +- # We need to add '_' to the symbols in $export_symbols first +- #archive_expsym_cmds="$archive_cmds"' && strip -s $export_symbols' +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- whole_archive_flag_spec='-all_load $convenience' +- ;; +- +- freebsd1*) +- ld_shlibs=no +- ;; +- +- # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor +- # support. Future versions do this automatically, but an explicit c++rt0.o +- # does not break anything, and helps significantly (at the cost of a little +- # extra space). +- freebsd2.2*) +- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' +- hardcode_libdir_flag_spec='-R$libdir' +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- ;; ++# find the maximum length of command line arguments ++{ echo "$as_me:$LINENO: checking the maximum length of command line arguments" >&5 ++echo $ECHO_N "checking the maximum length of command line arguments... $ECHO_C" >&6; } ++if test "${lt_cv_sys_max_cmd_len+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ i=0 ++ teststring="ABCD" + +- # Unfortunately, older versions of FreeBSD 2 do not have this feature. +- freebsd2*) +- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct=yes +- hardcode_minus_L=yes +- hardcode_shlibpath_var=no ++ case $build_os in ++ msdosdjgpp*) ++ # On DJGPP, this test can blow up pretty badly due to problems in libc ++ # (any single argument exceeding 2000 bytes causes a buffer overrun ++ # during glob expansion). Even if it were fixed, the result of this ++ # check would be larger than it should be. ++ lt_cv_sys_max_cmd_len=12288; # 12K is about right + ;; + +- # FreeBSD 3 and greater uses gcc -shared to do shared libraries. +- freebsd*) +- archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec='-R$libdir' +- hardcode_direct=yes +- hardcode_shlibpath_var=no ++ gnu*) ++ # Under GNU Hurd, this test is not required because there is ++ # no limit to the length of command line arguments. ++ # Libtool will interpret -1 as no limit whatsoever ++ lt_cv_sys_max_cmd_len=-1; + ;; + +- hpux9* | hpux10* | hpux11*) +- case $host_os in +- hpux9*) archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ;; +- *) archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ;; +- esac +- hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' +- hardcode_libdir_separator=: +- hardcode_direct=yes +- hardcode_minus_L=yes # Not in the search PATH, but as the default +- # location of the library. +- export_dynamic_flag_spec='${wl}-E' ++ cygwin* | mingw*) ++ # On Win9x/ME, this test blows up -- it succeeds, but takes ++ # about 5 minutes as the teststring grows exponentially. ++ # Worse, since 9x/ME are not pre-emptively multitasking, ++ # you end up with a "frozen" computer, even though with patience ++ # the test eventually succeeds (with a max line length of 256k). ++ # Instead, let's just punt: use the minimum linelength reported by ++ # all of the supported platforms: 8192 (on NT/2K/XP). ++ lt_cv_sys_max_cmd_len=8192; + ;; + +- irix5* | irix6* | nonstopux*) +- if test "$GCC" = yes; then +- archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' +- else +- archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- hardcode_libdir_flag_spec='-rpath $libdir' +- fi +- hardcode_libdir_separator=: +- link_all_deplibs=yes ++ amigaos*) ++ # On AmigaOS with pdksh, this test takes hours, literally. ++ # So we just punt and use a minimum line length of 8192. ++ lt_cv_sys_max_cmd_len=8192; + ;; + +- netbsd*) +- if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out ++ netbsd* | freebsd* | openbsd* | darwin* | dragonfly*) ++ # This has been around since 386BSD, at least. Likely further. ++ if test -x /sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/sbin/sysctl -n kern.argmax` ++ elif test -x /usr/sbin/sysctl; then ++ lt_cv_sys_max_cmd_len=`/usr/sbin/sysctl -n kern.argmax` + else +- archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF ++ lt_cv_sys_max_cmd_len=65536 # usable default for all BSDs + fi +- hardcode_libdir_flag_spec='-R$libdir' +- hardcode_direct=yes +- hardcode_shlibpath_var=no ++ # And add a safety zone ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 4` ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \* 3` + ;; + +- newsos6) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct=yes +- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator=: +- hardcode_shlibpath_var=no ++ interix*) ++ # We know the value 262144 and hardcode it with a safety zone (like BSD) ++ lt_cv_sys_max_cmd_len=196608 + ;; + +- openbsd*) +- hardcode_direct=yes +- hardcode_shlibpath_var=no +- if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec='${wl}-rpath,$libdir' +- export_dynamic_flag_spec='${wl}-E' +- else +- case "$host_os" in +- openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) +- archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec='-R$libdir' +- ;; +- *) +- archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' +- hardcode_libdir_flag_spec='${wl}-rpath,$libdir' +- ;; ++ osf*) ++ # Dr. Hans Ekkehard Plesser reports seeing a kernel panic running configure ++ # due to this test when exec_disable_arg_limit is 1 on Tru64. It is not ++ # nice to cause kernel panics so lets avoid the loop below. ++ # First set a reasonable default. ++ lt_cv_sys_max_cmd_len=16384 ++ # ++ if test -x /sbin/sysconfig; then ++ case `/sbin/sysconfig -q proc exec_disable_arg_limit` in ++ *1*) lt_cv_sys_max_cmd_len=-1 ;; + esac + fi + ;; +- +- os2*) +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_minus_L=yes +- allow_undefined_flag=unsupported +- archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' +- old_archive_from_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ++ sco3.2v5*) ++ lt_cv_sys_max_cmd_len=102400 + ;; +- +- osf3*) +- if test "$GCC" = yes; then +- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ sysv5* | sco5v6* | sysv4.2uw2*) ++ kargmax=`grep ARG_MAX /etc/conf/cf.d/stune 2>/dev/null` ++ if test -n "$kargmax"; then ++ lt_cv_sys_max_cmd_len=`echo $kargmax | sed 's/.*[ ]//'` + else +- allow_undefined_flag=' -expect_unresolved \*' +- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ lt_cv_sys_max_cmd_len=32768 + fi +- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' +- hardcode_libdir_separator=: + ;; ++ *) ++ # If test is not a shell built-in, we'll probably end up computing a ++ # maximum length that is only half of the actual maximum length, but ++ # we can't tell. ++ SHELL=${SHELL-${CONFIG_SHELL-/bin/sh}} ++ while (test "X"`$SHELL $0 --fallback-echo "X$teststring" 2>/dev/null` \ ++ = "XX$teststring") >/dev/null 2>&1 && ++ new_result=`expr "X$teststring" : ".*" 2>&1` && ++ lt_cv_sys_max_cmd_len=$new_result && ++ test $i != 17 # 1/2 MB should be enough ++ do ++ i=`expr $i + 1` ++ teststring=$teststring$teststring ++ done ++ teststring= ++ # Add a significant safety factor because C++ compilers can tack on massive ++ # amounts of additional arguments before passing them to the linker. ++ # It appears as though 1/2 is a usable value. ++ lt_cv_sys_max_cmd_len=`expr $lt_cv_sys_max_cmd_len \/ 2` ++ ;; ++ esac + +- osf4* | osf5*) # as osf3* with the addition of -msym flag +- if test "$GCC" = yes; then +- allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' +- archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' +- hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' +- else +- allow_undefined_flag=' -expect_unresolved \*' +- archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' +- archive_expsym_cmds='for i in `cat $export_symbols`; do printf "-exported_symbol " >> $lib.exp; echo "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ +- $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${objdir}/so_locations -o $lib~$rm $lib.exp' ++fi + +- #Both c and cxx compiler support -rpath directly +- hardcode_libdir_flag_spec='-rpath $libdir' +- fi +- hardcode_libdir_separator=: +- ;; ++if test -n $lt_cv_sys_max_cmd_len ; then ++ { echo "$as_me:$LINENO: result: $lt_cv_sys_max_cmd_len" >&5 ++echo "${ECHO_T}$lt_cv_sys_max_cmd_len" >&6; } ++else ++ { echo "$as_me:$LINENO: result: none" >&5 ++echo "${ECHO_T}none" >&6; } ++fi + +- sco3.2v5*) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var=no +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- export_dynamic_flag_spec='${wl}-Bexport' +- ;; + +- solaris*) +- # gcc --version < 3.0 without binutils cannot create self contained +- # shared libraries reliably, requiring libgcc.a to resolve some of +- # the object symbols generated in some cases. Libraries that use +- # assert need libgcc.a to resolve __eprintf, for example. Linking +- # a copy of libgcc.a into every shared library to guarantee resolving +- # such symbols causes other problems: According to Tim Van Holder +- # , C++ libraries end up with a separate +- # (to the application) exception stack for one thing. +- no_undefined_flag=' -z defs' +- if test "$GCC" = yes; then +- case `$CC --version 2>/dev/null` in +- [12].*) +- cat <&2 + +-*** Warning: Releases of GCC earlier than version 3.0 cannot reliably +-*** create self contained shared libraries on Solaris systems, without +-*** introducing a dependency on libgcc.a. Therefore, libtool is disabling +-*** -no-undefined support, which will at least allow you to build shared +-*** libraries. However, you may find that when you link such libraries +-*** into an application without using GCC, you have to manually add +-*** \`gcc --print-libgcc-file-name\` to the link command. We urge you to +-*** upgrade to a newer version of GCC. Another option is to rebuild your +-*** current GCC to use the GNU linker from GNU binutils 2.9.1 or newer. + +-EOF +- no_undefined_flag= +- ;; +- esac +- fi +- # $CC -shared without GNU ld will not create a library from C++ +- # object files and a static libstdc++, better avoid it by now +- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- hardcode_libdir_flag_spec='-R$libdir' +- hardcode_shlibpath_var=no +- case $host_os in +- solaris2.[0-5] | solaris2.[0-5].*) ;; +- *) # Supported since Solaris 2.6 (maybe 2.5.1?) +- whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; +- esac +- link_all_deplibs=yes +- ;; ++# Check for command to grab the raw symbol name followed by C symbol from nm. ++{ echo "$as_me:$LINENO: checking command to parse $NM output from $compiler object" >&5 ++echo $ECHO_N "checking command to parse $NM output from $compiler object... $ECHO_C" >&6; } ++if test "${lt_cv_sys_global_symbol_pipe+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else + +- sunos4*) +- if test "x$host_vendor" = xsequent; then +- # Use $CC to link under sequent, because it throws in some extra .o +- # files that make .init and .fini sections work. +- archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' +- fi +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_direct=yes +- hardcode_minus_L=yes +- hardcode_shlibpath_var=no +- ;; ++# These are sane defaults that work on at least a few old systems. ++# [They come from Ultrix. What could be older than Ultrix?!! ;)] + +- sysv4) +- case $host_vendor in +- sni) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct=yes # is this really true??? +- ;; +- siemens) +- ## LD is ld it makes a PLAMLIB +- ## CC just makes a GrossModule. +- archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- reload_cmds='$CC -r -o $output$reload_objs' +- hardcode_direct=no +- ;; +- motorola) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct=no #Motorola manual says yes, but my tests say they lie +- ;; +- esac +- runpath_var='LD_RUN_PATH' +- hardcode_shlibpath_var=no +- ;; ++# Character class describing NM global symbol codes. ++symcode='[BCDEGRST]' + +- sysv4.3*) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var=no +- export_dynamic_flag_spec='-Bexport' +- ;; +- +- sysv5*) +- no_undefined_flag=' -z text' +- # $CC -shared without GNU ld will not create a library from C++ +- # object files and a static libstdc++, better avoid it by now +- archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' +- archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ +- $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' +- hardcode_libdir_flag_spec= +- hardcode_shlibpath_var=no +- runpath_var='LD_RUN_PATH' +- ;; ++# Regexp to match symbols that can be accessed directly from C. ++sympat='\([_A-Za-z][_A-Za-z0-9]*\)' + +- uts4*) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_shlibpath_var=no +- ;; ++# Transform an extracted symbol line into a proper C declaration ++lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^. .* \(.*\)$/extern int \1;/p'" + +- dgux*) +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_libdir_flag_spec='-L$libdir' +- hardcode_shlibpath_var=no +- ;; ++# Transform an extracted symbol line into symbol name and symbol address ++lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" + +- sysv4*MP*) +- if test -d /usr/nec; then +- archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' +- hardcode_shlibpath_var=no +- runpath_var=LD_RUN_PATH +- hardcode_runpath_var=yes +- ld_shlibs=yes +- fi +- ;; ++# Define system-specific variables. ++case $host_os in ++aix*) ++ symcode='[BCDT]' ++ ;; ++cygwin* | mingw* | pw32*) ++ symcode='[ABCDGISTW]' ++ ;; ++hpux*) # Its linker distinguishes data from code symbols ++ if test "$host_cpu" = ia64; then ++ symcode='[ABCDEGRST]' ++ fi ++ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" ++ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ++ ;; ++linux* | k*bsd*-gnu) ++ if test "$host_cpu" = ia64; then ++ symcode='[ABCDGIRSTW]' ++ lt_cv_sys_global_symbol_to_cdecl="sed -n -e 's/^T .* \(.*\)$/extern int \1();/p' -e 's/^$symcode* .* \(.*\)$/extern char \1;/p'" ++ lt_cv_sys_global_symbol_to_c_name_address="sed -n -e 's/^: \([^ ]*\) $/ {\\\"\1\\\", (lt_ptr) 0},/p' -e 's/^$symcode* \([^ ]*\) \([^ ]*\)$/ {\"\2\", (lt_ptr) \&\2},/p'" ++ fi ++ ;; ++irix* | nonstopux*) ++ symcode='[BCDEGRST]' ++ ;; ++osf*) ++ symcode='[BCDEGQRST]' ++ ;; ++solaris*) ++ symcode='[BDRT]' ++ ;; ++sco3.2v5*) ++ symcode='[DT]' ++ ;; ++sysv4.2uw2*) ++ symcode='[DT]' ++ ;; ++sysv5* | sco5v6* | unixware* | OpenUNIX*) ++ symcode='[ABDT]' ++ ;; ++sysv4) ++ symcode='[DFNSTU]' ++ ;; ++esac + +- sysv4.2uw2*) +- archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' +- hardcode_direct=yes +- hardcode_minus_L=no +- hardcode_shlibpath_var=no +- hardcode_runpath_var=yes +- runpath_var=LD_RUN_PATH +- ;; ++# Handle CRLF in mingw tool chain ++opt_cr= ++case $build_os in ++mingw*) ++ opt_cr=`echo 'x\{0,1\}' | tr x '\015'` # option cr in regexp ++ ;; ++esac + +- sysv5uw7* | unixware7*) +- no_undefined_flag='${wl}-z ${wl}text' +- if test "$GCC" = yes; then +- archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- else +- archive_cmds='$CC -G ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' +- fi +- runpath_var='LD_RUN_PATH' +- hardcode_shlibpath_var=no +- ;; ++# If we're using GNU nm, then use its standard symbol codes. ++case `$NM -V 2>&1` in ++*GNU* | *'with BFD'*) ++ symcode='[ABCDGIRSTW]' ;; ++esac + +- *) +- ld_shlibs=no +- ;; +- esac +-fi +-echo "$as_me:$LINENO: result: $ld_shlibs" >&5 +-echo "${ECHO_T}$ld_shlibs" >&6 +-test "$ld_shlibs" = no && can_build_shared=no ++# Try without a prefix undercore, then with it. ++for ac_symprfx in "" "_"; do + +-# Check hardcoding attributes. +-echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 +-echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6 +-hardcode_action= +-if test -n "$hardcode_libdir_flag_spec" || \ +- test -n "$runpath_var"; then ++ # Transform symcode, sympat, and symprfx into a raw symbol and a C symbol. ++ symxfrm="\\1 $ac_symprfx\\2 \\2" + +- # We can hardcode non-existant directories. +- if test "$hardcode_direct" != no && +- # If the only mechanism to avoid hardcoding is shlibpath_var, we +- # have to relink, otherwise we might link with an installed library +- # when we should be linking with a yet-to-be-installed one +- ## test "$hardcode_shlibpath_var" != no && +- test "$hardcode_minus_L" != no; then +- # Linking always hardcodes the temporary library directory. +- hardcode_action=relink ++ # Write the raw and C identifiers. ++ lt_cv_sys_global_symbol_pipe="sed -n -e 's/^.*[ ]\($symcode$symcode*\)[ ][ ]*$ac_symprfx$sympat$opt_cr$/$symxfrm/p'" ++ ++ # Check to see that the pipe works correctly. ++ pipe_works=no ++ ++ rm -f conftest* ++ cat > conftest.$ac_ext <&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ # Now try to grab the symbols. ++ nlist=conftest.nm ++ if { (eval echo "$as_me:$LINENO: \"$NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist\"") >&5 ++ (eval $NM conftest.$ac_objext \| $lt_cv_sys_global_symbol_pipe \> $nlist) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s "$nlist"; then ++ # Try sorting and uniquifying the output. ++ if sort "$nlist" | uniq > "$nlist"T; then ++ mv -f "$nlist"T "$nlist" ++ else ++ rm -f "$nlist"T ++ fi ++ ++ # Make sure that we snagged all the symbols we need. ++ if grep ' nm_test_var$' "$nlist" >/dev/null; then ++ if grep ' nm_test_func$' "$nlist" >/dev/null; then ++ cat < conftest.$ac_ext ++#ifdef __cplusplus ++extern "C" { ++#endif ++ ++EOF ++ # Now generate the symbol file. ++ eval "$lt_cv_sys_global_symbol_to_cdecl"' < "$nlist" | grep -v main >> conftest.$ac_ext' ++ ++ cat <> conftest.$ac_ext ++#if defined (__STDC__) && __STDC__ ++# define lt_ptr_t void * ++#else ++# define lt_ptr_t char * ++# define const ++#endif ++ ++/* The mapping between symbol names and symbols. */ ++const struct { ++ const char *name; ++ lt_ptr_t address; ++} ++lt_preloaded_symbols[] = ++{ ++EOF ++ $SED "s/^$symcode$symcode* \(.*\) \(.*\)$/ {\"\2\", (lt_ptr_t) \&\2},/" < "$nlist" | grep -v main >> conftest.$ac_ext ++ cat <<\EOF >> conftest.$ac_ext ++ {0, (lt_ptr_t) 0} ++}; ++ ++#ifdef __cplusplus ++} ++#endif ++EOF ++ # Now try linking the two files. ++ mv conftest.$ac_objext conftstm.$ac_objext ++ lt_save_LIBS="$LIBS" ++ lt_save_CFLAGS="$CFLAGS" ++ LIBS="conftstm.$ac_objext" ++ CFLAGS="$CFLAGS$lt_prog_compiler_no_builtin_flag" ++ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s conftest${ac_exeext}; then ++ pipe_works=yes ++ fi ++ LIBS="$lt_save_LIBS" ++ CFLAGS="$lt_save_CFLAGS" ++ else ++ echo "cannot find nm_test_func in $nlist" >&5 ++ fi ++ else ++ echo "cannot find nm_test_var in $nlist" >&5 ++ fi ++ else ++ echo "cannot run $lt_cv_sys_global_symbol_pipe" >&5 ++ fi + else +- # We can link without hardcoding, and we can hardcode nonexisting dirs. +- hardcode_action=immediate ++ echo "$progname: failed program was:" >&5 ++ cat conftest.$ac_ext >&5 ++ fi ++ rm -f conftest* conftst* ++ ++ # Do not use the global_symbol_pipe unless it works. ++ if test "$pipe_works" = yes; then ++ break ++ else ++ lt_cv_sys_global_symbol_pipe= + fi ++done ++ ++fi ++ ++if test -z "$lt_cv_sys_global_symbol_pipe"; then ++ lt_cv_sys_global_symbol_to_cdecl= ++fi ++if test -z "$lt_cv_sys_global_symbol_pipe$lt_cv_sys_global_symbol_to_cdecl"; then ++ { echo "$as_me:$LINENO: result: failed" >&5 ++echo "${ECHO_T}failed" >&6; } + else +- # We cannot hardcode anything, or else we can only hardcode existing +- # directories. +- hardcode_action=unsupported ++ { echo "$as_me:$LINENO: result: ok" >&5 ++echo "${ECHO_T}ok" >&6; } + fi +-echo "$as_me:$LINENO: result: $hardcode_action" >&5 +-echo "${ECHO_T}$hardcode_action" >&6 + +-striplib= +-old_striplib= +-echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 +-echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6 +-if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then +- test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" +- test -z "$striplib" && striplib="$STRIP --strip-unneeded" +- echo "$as_me:$LINENO: result: yes" >&5 +-echo "${ECHO_T}yes" >&6 ++{ echo "$as_me:$LINENO: checking for objdir" >&5 ++echo $ECHO_N "checking for objdir... $ECHO_C" >&6; } ++if test "${lt_cv_objdir+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ rm -f .libs 2>/dev/null ++mkdir .libs 2>/dev/null ++if test -d .libs; then ++ lt_cv_objdir=.libs + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ # MS-DOS does not allow filenames that begin with a dot. ++ lt_cv_objdir=_libs ++fi ++rmdir .libs 2>/dev/null + fi ++{ echo "$as_me:$LINENO: result: $lt_cv_objdir" >&5 ++echo "${ECHO_T}$lt_cv_objdir" >&6; } ++objdir=$lt_cv_objdir + +-reload_cmds='$LD$reload_flag -o $output$reload_objs' +-test -z "$deplibs_check_method" && deplibs_check_method=unknown + +-# PORTME Fill in your ld.so characteristics +-echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 +-echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6 +-library_names_spec= +-libname_spec='lib$name' +-soname_spec= +-postinstall_cmds= +-postuninstall_cmds= +-finish_cmds= +-finish_eval= +-shlibpath_var= +-shlibpath_overrides_runpath=unknown +-version_type=none +-dynamic_linker="$host_os ld.so" +-sys_lib_dlsearch_path_spec="/lib /usr/lib" +-sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" + +-case $host_os in +-aix3*) +- version_type=linux +- library_names_spec='${libname}${release}.so$versuffix $libname.a' +- shlibpath_var=LIBPATH + +- # AIX has no versioning support, so we append a major version to the name. +- soname_spec='${libname}${release}.so$major' +- ;; + +-aix4* | aix5*) +- version_type=linux +- need_lib_prefix=no +- need_version=no +- hardcode_into_libs=yes +- if test "$host_cpu" = ia64; then +- # AIX 5 supports IA64 +- library_names_spec='${libname}${release}.so$major ${libname}${release}.so$versuffix $libname.so' +- shlibpath_var=LD_LIBRARY_PATH +- else +- # With GCC up to 2.95.x, collect2 would create an import file +- # for dependence libraries. The import file would start with +- # the line `#! .'. This would cause the generated library to +- # depend on `.', always an invalid library. This was fixed in +- # development snapshots of GCC prior to 3.0. +- case $host_os in +- aix4 | aix4.[01] | aix4.[01].*) +- if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' +- echo ' yes ' +- echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then +- : +- else +- can_build_shared=no +- fi +- ;; +- esac +- # AIX (on Power*) has no versioning support, so currently we can +- # not hardcode correct soname into executable. Probably we can +- # add versioning support to collect2, so additional links can +- # be useful in future. +- if test "$aix_use_runtimelinking" = yes; then +- # If using run time linking (on AIX 4.2 or later) use lib.so +- # instead of lib.a to let people know that these are not +- # typical AIX shared libraries. +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' +- else +- # We preserve .a as extension for shared libraries through AIX4.2 +- # and later when we are not doing run time linking. +- library_names_spec='${libname}${release}.a $libname.a' +- soname_spec='${libname}${release}.so$major' +- fi +- shlibpath_var=LIBPATH ++case $host_os in ++aix3*) ++ # AIX sometimes has problems with the GCC collect2 program. For some ++ # reason, if we set the COLLECT_NAMES environment variable, the problems ++ # vanish in a puff of smoke. ++ if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES + fi +- hardcode_into_libs=yes +- ;; +- +-amigaos*) +- library_names_spec='$libname.ixlibrary $libname.a' +- # Create ${libname}_ixlibrary.a entries in /sys/libs. +- finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "(cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a)"; (cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a) || exit 1; done' + ;; ++esac + +-beos*) +- library_names_spec='${libname}.so' +- dynamic_linker="$host_os ld.so" +- shlibpath_var=LIBRARY_PATH +- ;; ++# Sed substitution that helps us do robust quoting. It backslashifies ++# metacharacters that are still active within double-quoted strings. ++Xsed='sed -e 1s/^X//' ++sed_quote_subst='s/\([\\"\\`$\\\\]\)/\\\1/g' + +-bsdi4*) ++# Same as above, but do not quote variable references. ++double_quote_subst='s/\([\\"\\`\\\\]\)/\\\1/g' ++ ++# Sed substitution to delay expansion of an escaped shell variable in a ++# double_quote_subst'ed string. ++delay_variable_subst='s/\\\\\\\\\\\$/\\\\\\$/g' ++ ++# Sed substitution to avoid accidental globbing in evaled expressions ++no_glob_subst='s/\*/\\\*/g' ++ ++# Constants: ++rm="rm -f" ++ ++# Global variables: ++default_ofile=libtool ++can_build_shared=yes ++ ++# All known linkers require a `.a' archive for static linking (except MSVC, ++# which needs '.lib'). ++libext=a ++ltmain="$ac_aux_dir/ltmain.sh" ++ofile="$default_ofile" ++with_gnu_ld="$lt_cv_prog_gnu_ld" ++ ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}ar", so it can be a program name with args. ++set dummy ${ac_tool_prefix}ar; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_AR+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$AR"; then ++ ac_cv_prog_AR="$AR" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_AR="${ac_tool_prefix}ar" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++AR=$ac_cv_prog_AR ++if test -n "$AR"; then ++ { echo "$as_me:$LINENO: result: $AR" >&5 ++echo "${ECHO_T}$AR" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_AR"; then ++ ac_ct_AR=$AR ++ # Extract the first word of "ar", so it can be a program name with args. ++set dummy ar; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_AR+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_AR"; then ++ ac_cv_prog_ac_ct_AR="$ac_ct_AR" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_AR="ar" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_AR=$ac_cv_prog_ac_ct_AR ++if test -n "$ac_ct_AR"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_AR" >&5 ++echo "${ECHO_T}$ac_ct_AR" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_AR" = x; then ++ AR="false" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ AR=$ac_ct_AR ++ fi ++else ++ AR="$ac_cv_prog_AR" ++fi ++ ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}ranlib", so it can be a program name with args. ++set dummy ${ac_tool_prefix}ranlib; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_RANLIB+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$RANLIB"; then ++ ac_cv_prog_RANLIB="$RANLIB" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_RANLIB="${ac_tool_prefix}ranlib" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++RANLIB=$ac_cv_prog_RANLIB ++if test -n "$RANLIB"; then ++ { echo "$as_me:$LINENO: result: $RANLIB" >&5 ++echo "${ECHO_T}$RANLIB" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_RANLIB"; then ++ ac_ct_RANLIB=$RANLIB ++ # Extract the first word of "ranlib", so it can be a program name with args. ++set dummy ranlib; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_RANLIB+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_RANLIB"; then ++ ac_cv_prog_ac_ct_RANLIB="$ac_ct_RANLIB" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_RANLIB="ranlib" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_RANLIB=$ac_cv_prog_ac_ct_RANLIB ++if test -n "$ac_ct_RANLIB"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_RANLIB" >&5 ++echo "${ECHO_T}$ac_ct_RANLIB" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_RANLIB" = x; then ++ RANLIB=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ RANLIB=$ac_ct_RANLIB ++ fi ++else ++ RANLIB="$ac_cv_prog_RANLIB" ++fi ++ ++if test -n "$ac_tool_prefix"; then ++ # Extract the first word of "${ac_tool_prefix}strip", so it can be a program name with args. ++set dummy ${ac_tool_prefix}strip; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_STRIP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$STRIP"; then ++ ac_cv_prog_STRIP="$STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_STRIP="${ac_tool_prefix}strip" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++STRIP=$ac_cv_prog_STRIP ++if test -n "$STRIP"; then ++ { echo "$as_me:$LINENO: result: $STRIP" >&5 ++echo "${ECHO_T}$STRIP" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ ++fi ++if test -z "$ac_cv_prog_STRIP"; then ++ ac_ct_STRIP=$STRIP ++ # Extract the first word of "strip", so it can be a program name with args. ++set dummy strip; ac_word=$2 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } ++if test "${ac_cv_prog_ac_ct_STRIP+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -n "$ac_ct_STRIP"; then ++ ac_cv_prog_ac_ct_STRIP="$ac_ct_STRIP" # Let the user override the test. ++else ++as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ for ac_exec_ext in '' $ac_executable_extensions; do ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then ++ ac_cv_prog_ac_ct_STRIP="strip" ++ echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 ++ break 2 ++ fi ++done ++done ++IFS=$as_save_IFS ++ ++fi ++fi ++ac_ct_STRIP=$ac_cv_prog_ac_ct_STRIP ++if test -n "$ac_ct_STRIP"; then ++ { echo "$as_me:$LINENO: result: $ac_ct_STRIP" >&5 ++echo "${ECHO_T}$ac_ct_STRIP" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ if test "x$ac_ct_STRIP" = x; then ++ STRIP=":" ++ else ++ case $cross_compiling:$ac_tool_warned in ++yes:) ++{ echo "$as_me:$LINENO: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&5 ++echo "$as_me: WARNING: In the future, Autoconf will not detect cross-tools ++whose name does not start with the host triplet. If you think this ++configuration is useful to you, please write to autoconf@gnu.org." >&2;} ++ac_tool_warned=yes ;; ++esac ++ STRIP=$ac_ct_STRIP ++ fi ++else ++ STRIP="$ac_cv_prog_STRIP" ++fi ++ ++ ++old_CC="$CC" ++old_CFLAGS="$CFLAGS" ++ ++# Set sane defaults for various variables ++test -z "$AR" && AR=ar ++test -z "$AR_FLAGS" && AR_FLAGS=cru ++test -z "$AS" && AS=as ++test -z "$CC" && CC=cc ++test -z "$LTCC" && LTCC=$CC ++test -z "$LTCFLAGS" && LTCFLAGS=$CFLAGS ++test -z "$DLLTOOL" && DLLTOOL=dlltool ++test -z "$LD" && LD=ld ++test -z "$LN_S" && LN_S="ln -s" ++test -z "$MAGIC_CMD" && MAGIC_CMD=file ++test -z "$NM" && NM=nm ++test -z "$SED" && SED=sed ++test -z "$OBJDUMP" && OBJDUMP=objdump ++test -z "$RANLIB" && RANLIB=: ++test -z "$STRIP" && STRIP=: ++test -z "$ac_objext" && ac_objext=o ++ ++# Determine commands to create old-style static archives. ++old_archive_cmds='$AR $AR_FLAGS $oldlib$oldobjs$old_deplibs' ++old_postinstall_cmds='chmod 644 $oldlib' ++old_postuninstall_cmds= ++ ++if test -n "$RANLIB"; then ++ case $host_os in ++ openbsd*) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB -t \$oldlib" ++ ;; ++ *) ++ old_postinstall_cmds="$old_postinstall_cmds~\$RANLIB \$oldlib" ++ ;; ++ esac ++ old_archive_cmds="$old_archive_cmds~\$RANLIB \$oldlib" ++fi ++ ++for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++ ++ ++# Only perform the check for file, if the check method requires it ++case $deplibs_check_method in ++file_magic*) ++ if test "$file_magic_cmd" = '$MAGIC_CMD'; then ++ { echo "$as_me:$LINENO: checking for ${ac_tool_prefix}file" >&5 ++echo $ECHO_N "checking for ${ac_tool_prefix}file... $ECHO_C" >&6; } ++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $MAGIC_CMD in ++[\\/*] | ?:[\\/]*) ++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ++ ;; ++*) ++ lt_save_MAGIC_CMD="$MAGIC_CMD" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" ++ for ac_dir in $ac_dummy; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/${ac_tool_prefix}file; then ++ lt_cv_path_MAGIC_CMD="$ac_dir/${ac_tool_prefix}file" ++ if test -n "$file_magic_test_file"; then ++ case $deplibs_check_method in ++ "file_magic "*) ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` ++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ : ++ else ++ cat <&2 ++ ++*** Warning: the command libtool uses to detect shared libraries, ++*** $file_magic_cmd, produces output that libtool cannot recognize. ++*** The result is that libtool may fail to recognize shared libraries ++*** as such. This will affect the creation of libtool libraries that ++*** depend on shared libraries, but programs linked with such libtool ++*** libraries will work regardless of this problem. Nevertheless, you ++*** may want to report the problem to your system manager and/or to ++*** bug-libtool@gnu.org ++ ++EOF ++ fi ;; ++ esac ++ fi ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ MAGIC_CMD="$lt_save_MAGIC_CMD" ++ ;; ++esac ++fi ++ ++MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++if test -n "$MAGIC_CMD"; then ++ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 ++echo "${ECHO_T}$MAGIC_CMD" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++if test -z "$lt_cv_path_MAGIC_CMD"; then ++ if test -n "$ac_tool_prefix"; then ++ { echo "$as_me:$LINENO: checking for file" >&5 ++echo $ECHO_N "checking for file... $ECHO_C" >&6; } ++if test "${lt_cv_path_MAGIC_CMD+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ case $MAGIC_CMD in ++[\\/*] | ?:[\\/]*) ++ lt_cv_path_MAGIC_CMD="$MAGIC_CMD" # Let the user override the test with a path. ++ ;; ++*) ++ lt_save_MAGIC_CMD="$MAGIC_CMD" ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ ac_dummy="/usr/bin$PATH_SEPARATOR$PATH" ++ for ac_dir in $ac_dummy; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f $ac_dir/file; then ++ lt_cv_path_MAGIC_CMD="$ac_dir/file" ++ if test -n "$file_magic_test_file"; then ++ case $deplibs_check_method in ++ "file_magic "*) ++ file_magic_regex=`expr "$deplibs_check_method" : "file_magic \(.*\)"` ++ MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++ if eval $file_magic_cmd \$file_magic_test_file 2> /dev/null | ++ $EGREP "$file_magic_regex" > /dev/null; then ++ : ++ else ++ cat <&2 ++ ++*** Warning: the command libtool uses to detect shared libraries, ++*** $file_magic_cmd, produces output that libtool cannot recognize. ++*** The result is that libtool may fail to recognize shared libraries ++*** as such. This will affect the creation of libtool libraries that ++*** depend on shared libraries, but programs linked with such libtool ++*** libraries will work regardless of this problem. Nevertheless, you ++*** may want to report the problem to your system manager and/or to ++*** bug-libtool@gnu.org ++ ++EOF ++ fi ;; ++ esac ++ fi ++ break ++ fi ++ done ++ IFS="$lt_save_ifs" ++ MAGIC_CMD="$lt_save_MAGIC_CMD" ++ ;; ++esac ++fi ++ ++MAGIC_CMD="$lt_cv_path_MAGIC_CMD" ++if test -n "$MAGIC_CMD"; then ++ { echo "$as_me:$LINENO: result: $MAGIC_CMD" >&5 ++echo "${ECHO_T}$MAGIC_CMD" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ++ else ++ MAGIC_CMD=: ++ fi ++fi ++ ++ fi ++ ;; ++esac ++ ++enable_dlopen=no ++enable_win32_dll=no ++ ++# Check whether --enable-libtool-lock was given. ++if test "${enable_libtool_lock+set}" = set; then ++ enableval=$enable_libtool_lock; ++fi ++ ++test "x$enable_libtool_lock" != xno && enable_libtool_lock=yes ++ ++ ++# Check whether --with-pic was given. ++if test "${with_pic+set}" = set; then ++ withval=$with_pic; pic_mode="$withval" ++else ++ pic_mode=default ++fi ++ ++test -z "$pic_mode" && pic_mode=default ++ ++# Use C for the default configuration in the libtool script ++tagname= ++lt_save_CC="$CC" ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++ ++# Source file extension for C test sources. ++ac_ext=c ++ ++# Object file extension for compiled C test sources. ++objext=o ++objext=$objext ++ ++# Code to be used in simple compile tests ++lt_simple_compile_test_code="int some_variable = 0;\n" ++ ++# Code to be used in simple link tests ++lt_simple_link_test_code='int main(){return(0);}\n' ++ ++ ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} ++ ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++ ++# Allow CC to be a program name with arguments. ++compiler=$CC ++ ++ ++# save warnings/boilerplate of simple test code ++ac_outfile=conftest.$ac_objext ++printf "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$rm conftest* ++ ++ac_outfile=conftest.$ac_objext ++printf "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$rm conftest* ++ ++ ++ ++lt_prog_compiler_no_builtin_flag= ++ ++if test "$GCC" = yes; then ++ lt_prog_compiler_no_builtin_flag=' -fno-builtin' ++ ++ ++{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 ++echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_rtti_exceptions=no ++ ac_outfile=conftest.$ac_objext ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="-fno-rtti -fno-exceptions" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:7412: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&5 ++ echo "$as_me:7416: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_rtti_exceptions=yes ++ fi ++ fi ++ $rm conftest* ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } ++ ++if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then ++ lt_prog_compiler_no_builtin_flag="$lt_prog_compiler_no_builtin_flag -fno-rtti -fno-exceptions" ++else ++ : ++fi ++ ++fi ++ ++lt_prog_compiler_wl= ++lt_prog_compiler_pic= ++lt_prog_compiler_static= ++ ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } ++ ++ if test "$GCC" = yes; then ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_static='-static' ++ ++ case $host_os in ++ aix*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static='-Bstatic' ++ fi ++ ;; ++ ++ amigaos*) ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ lt_prog_compiler_pic='-m68020 -resident32 -malways-restore-a4' ++ ;; ++ ++ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. ++ ;; ++ ++ mingw* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ lt_prog_compiler_pic='-DDLL_EXPORT' ++ ;; ++ ++ darwin* | rhapsody*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ lt_prog_compiler_pic='-fno-common' ++ ;; ++ ++ interix3*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; ++ ++ msdosdjgpp*) ++ # Just because we use GCC doesn't mean we suddenly get shared libraries ++ # on systems that don't support them. ++ lt_prog_compiler_can_build_shared=no ++ enable_shared=no ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ lt_prog_compiler_pic=-Kconform_pic ++ fi ++ ;; ++ ++ hpux*) ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ lt_prog_compiler_pic='-fPIC' ++ ;; ++ esac ++ ;; ++ ++ *) ++ lt_prog_compiler_pic='-fPIC' ++ ;; ++ esac ++ else ++ # PORTME Check for flag to pass linker flags through the system compiler. ++ case $host_os in ++ aix*) ++ lt_prog_compiler_wl='-Wl,' ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static='-Bstatic' ++ else ++ lt_prog_compiler_static='-bnso -bI:/lib/syscalls.exp' ++ fi ++ ;; ++ darwin*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ case $cc_basename in ++ xlc*) ++ lt_prog_compiler_pic='-qnocommon' ++ lt_prog_compiler_wl='-Wl,' ++ ;; ++ esac ++ ;; ++ ++ mingw* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ lt_prog_compiler_pic='-DDLL_EXPORT' ++ ;; ++ ++ hpux9* | hpux10* | hpux11*) ++ lt_prog_compiler_wl='-Wl,' ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ lt_prog_compiler_pic='+Z' ++ ;; ++ esac ++ # Is there a better lt_prog_compiler_static that works with the bundled CC? ++ lt_prog_compiler_static='${wl}-a ${wl}archive' ++ ;; ++ ++ irix5* | irix6* | nonstopux*) ++ lt_prog_compiler_wl='-Wl,' ++ # PIC (with -KPIC) is the default. ++ lt_prog_compiler_static='-non_shared' ++ ;; ++ ++ newsos6) ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ++ linux* | k*bsd*-gnu) ++ case $cc_basename in ++ icc* | ecc*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-static' ++ ;; ++ pgcc* | pgf77* | pgf90* | pgf95*) ++ # Portland Group compilers (*not* the Pentium gcc compiler, ++ # which looks to be a dead project) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-fpic' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ccc*) ++ lt_prog_compiler_wl='-Wl,' ++ # All Alpha code is PIC. ++ lt_prog_compiler_static='-non_shared' ++ ;; ++ esac ++ ;; ++ ++ osf3* | osf4* | osf5*) ++ lt_prog_compiler_wl='-Wl,' ++ # All OSF/1 code is PIC. ++ lt_prog_compiler_static='-non_shared' ++ ;; ++ ++ solaris*) ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ case $cc_basename in ++ f77* | f90* | f95*) ++ lt_prog_compiler_wl='-Qoption ld ';; ++ *) ++ lt_prog_compiler_wl='-Wl,';; ++ esac ++ ;; ++ ++ sunos4*) ++ lt_prog_compiler_wl='-Qoption ld ' ++ lt_prog_compiler_pic='-PIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ++ sysv4 | sysv4.2uw2* | sysv4.3*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec ;then ++ lt_prog_compiler_pic='-Kconform_pic' ++ lt_prog_compiler_static='-Bstatic' ++ fi ++ ;; ++ ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_pic='-KPIC' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ++ unicos*) ++ lt_prog_compiler_wl='-Wl,' ++ lt_prog_compiler_can_build_shared=no ++ ;; ++ ++ uts4*) ++ lt_prog_compiler_pic='-pic' ++ lt_prog_compiler_static='-Bstatic' ++ ;; ++ ++ *) ++ lt_prog_compiler_can_build_shared=no ++ ;; ++ esac ++ fi ++ ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic" >&6; } ++ ++# ++# Check to make sure the PIC flag actually works. ++# ++if test -n "$lt_prog_compiler_pic"; then ++ ++{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic works... $ECHO_C" >&6; } ++if test "${lt_prog_compiler_pic_works+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_prog_compiler_pic_works=no ++ ac_outfile=conftest.$ac_objext ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="$lt_prog_compiler_pic -DPIC" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:7680: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&5 ++ echo "$as_me:7684: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_prog_compiler_pic_works=yes ++ fi ++ fi ++ $rm conftest* ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_works" >&6; } ++ ++if test x"$lt_prog_compiler_pic_works" = xyes; then ++ case $lt_prog_compiler_pic in ++ "" | " "*) ;; ++ *) lt_prog_compiler_pic=" $lt_prog_compiler_pic" ;; ++ esac ++else ++ lt_prog_compiler_pic= ++ lt_prog_compiler_can_build_shared=no ++fi ++ ++fi ++case $host_os in ++ # For platforms which do not support PIC, -DPIC is meaningless: ++ *djgpp*) ++ lt_prog_compiler_pic= ++ ;; ++ *) ++ lt_prog_compiler_pic="$lt_prog_compiler_pic -DPIC" ++ ;; ++esac ++ ++# ++# Check to make sure the static flag actually works. ++# ++wl=$lt_prog_compiler_wl eval lt_tmp_static_flag=\"$lt_prog_compiler_static\" ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } ++if test "${lt_prog_compiler_static_works+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_prog_compiler_static_works=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $lt_tmp_static_flag" ++ printf "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&5 ++ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ lt_prog_compiler_static_works=yes ++ fi ++ else ++ lt_prog_compiler_static_works=yes ++ fi ++ fi ++ $rm conftest* ++ LDFLAGS="$save_LDFLAGS" ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works" >&5 ++echo "${ECHO_T}$lt_prog_compiler_static_works" >&6; } ++ ++if test x"$lt_prog_compiler_static_works" = xyes; then ++ : ++else ++ lt_prog_compiler_static= ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_c_o+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_c_o=no ++ $rm -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:7784: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&5 ++ echo "$as_me:7788: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_c_o=yes ++ fi ++ fi ++ chmod u+w . 2>&5 ++ $rm conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files ++ $rm out/* && rmdir out ++ cd .. ++ rmdir conftest ++ $rm conftest* ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o" >&6; } ++ ++ ++hard_links="nottested" ++if test "$lt_cv_prog_compiler_c_o" = no && test "$need_locks" != no; then ++ # do not overwrite the value of need_locks provided by the user ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } ++ hard_links=yes ++ $rm conftest* ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ touch conftest.a ++ ln conftest.a conftest.b 2>&5 || hard_links=no ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ { echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6; } ++ if test "$hard_links" = no; then ++ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 ++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} ++ need_locks=warn ++ fi ++else ++ need_locks=no ++fi ++ ++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } ++ ++ runpath_var= ++ allow_undefined_flag= ++ enable_shared_with_static_runtimes=no ++ archive_cmds= ++ archive_expsym_cmds= ++ old_archive_From_new_cmds= ++ old_archive_from_expsyms_cmds= ++ export_dynamic_flag_spec= ++ whole_archive_flag_spec= ++ thread_safe_flag_spec= ++ hardcode_libdir_flag_spec= ++ hardcode_libdir_flag_spec_ld= ++ hardcode_libdir_separator= ++ hardcode_direct=no ++ hardcode_minus_L=no ++ hardcode_shlibpath_var=unsupported ++ link_all_deplibs=unknown ++ hardcode_automatic=no ++ module_cmds= ++ module_expsym_cmds= ++ always_export_symbols=no ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ # include_expsyms should be a list of space-separated symbols to be *always* ++ # included in the symbol list ++ include_expsyms= ++ # exclude_expsyms can be an extended regexp of symbols to exclude ++ # it will be wrapped by ` (' and `)$', so one must not match beginning or ++ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', ++ # as well as any symbol that contains `d'. ++ exclude_expsyms="_GLOBAL_OFFSET_TABLE_" ++ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out ++ # platforms (ab)use it in PIC code, but their linkers get confused if ++ # the symbol is explicitly referenced. Since portable code cannot ++ # rely on this symbol name, it's probably fine to never include it in ++ # preloaded symbol tables. ++ extract_expsyms_cmds= ++ # Just being paranoid about ensuring that cc_basename is set. ++ for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++ ++ case $host_os in ++ cygwin* | mingw* | pw32*) ++ # FIXME: the MSVC++ port hasn't been tested in a loooong time ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ if test "$GCC" != yes; then ++ with_gnu_ld=no ++ fi ++ ;; ++ interix*) ++ # we just hope/assume this is gcc and not c89 (= MSVC++) ++ with_gnu_ld=yes ++ ;; ++ openbsd*) ++ with_gnu_ld=no ++ ;; ++ esac ++ ++ ld_shlibs=yes ++ if test "$with_gnu_ld" = yes; then ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ wlarc='${wl}' ++ ++ # Set some defaults for GNU ld with shared library support. These ++ # are reset later if shared libraries are not supported. Putting them ++ # here allows them to be overridden if necessary. ++ runpath_var=LD_RUN_PATH ++ hardcode_libdir_flag_spec='${wl}--rpath ${wl}$libdir' ++ export_dynamic_flag_spec='${wl}--export-dynamic' ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then ++ whole_archive_flag_spec="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ whole_archive_flag_spec= ++ fi ++ supports_anon_versioning=no ++ case `$LD -v 2>/dev/null` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 ++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... ++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... ++ *\ 2.11.*) ;; # other 2.11 versions ++ *) supports_anon_versioning=yes ;; ++ esac ++ ++ # See if GNU ld supports shared libraries. ++ case $host_os in ++ aix3* | aix4* | aix5*) ++ # On AIX/PPC, the GNU linker is very broken ++ if test "$host_cpu" != ia64; then ++ ld_shlibs=no ++ cat <&2 ++ ++*** Warning: the GNU linker, at least up to release 2.9.1, is reported ++*** to be unable to reliably create shared libraries on AIX. ++*** Therefore, libtool is disabling shared libraries support. If you ++*** really care for shared libraries, you may want to modify your PATH ++*** so that a non-GNU linker is found, and then restart. ++ ++EOF ++ fi ++ ;; ++ ++ amigaos*) ++ archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ ++ # Samuel A. Falvo II reports ++ # that the semantics of dynamic libraries on AmigaOS, at least up ++ # to version 4, is to share data among multiple programs linked ++ # with the same dynamic library. Since this doesn't match the ++ # behavior of shared libraries on other platforms, we can't use ++ # them. ++ ld_shlibs=no ++ ;; ++ ++ beos*) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ allow_undefined_flag=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ archive_cmds='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ ++ cygwin* | mingw* | pw32*) ++ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, ) is actually meaningless, ++ # as there is no search path for DLLs. ++ hardcode_libdir_flag_spec='-L$libdir' ++ allow_undefined_flag=unsupported ++ always_export_symbols=no ++ enable_shared_with_static_runtimes=yes ++ export_symbols_cmds='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' ++ ++ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ archive_expsym_cmds='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ ++ interix3*) ++ hardcode_direct=no ++ hardcode_shlibpath_var=no ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ archive_cmds='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ archive_expsym_cmds='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; ++ ++ linux* | k*bsd*-gnu) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ tmp_addflag= ++ case $cc_basename,$host_cpu in ++ pgcc*) # Portland Group C compiler ++ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag' ++ ;; ++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers ++ whole_archive_flag_spec='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag -Mnomain' ;; ++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 ++ tmp_addflag=' -i_dynamic' ;; ++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 ++ tmp_addflag=' -i_dynamic -nofor_main' ;; ++ ifc* | ifort*) # Intel Fortran compiler ++ tmp_addflag=' -nofor_main' ;; ++ esac ++ archive_cmds='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ ++ if test $supports_anon_versioning = yes; then ++ archive_expsym_cmds='$echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ $echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi ++ link_all_deplibs=no ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ archive_cmds='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' ++ wlarc= ++ else ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ fi ++ ;; ++ ++ solaris*) ++ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then ++ ld_shlibs=no ++ cat <&2 ++ ++*** Warning: The releases 2.8.* of the GNU linker cannot reliably ++*** create shared libraries on Solaris systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.9.1 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++EOF ++ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) ++ case `$LD -v 2>&1` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ++ ld_shlibs=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not ++*** reliably create shared libraries on SCO systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++_LT_EOF ++ ;; ++ *) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ esac ++ ;; ++ ++ sunos4*) ++ archive_cmds='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ wlarc= ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ *) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs=no ++ fi ++ ;; ++ esac ++ ++ if test "$ld_shlibs" = no; then ++ runpath_var= ++ hardcode_libdir_flag_spec= ++ export_dynamic_flag_spec= ++ whole_archive_flag_spec= ++ fi ++ else ++ # PORTME fill in a description of your system's linker (not GNU ld) ++ case $host_os in ++ aix3*) ++ allow_undefined_flag=unsupported ++ always_export_symbols=yes ++ archive_expsym_cmds='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' ++ # Note: this linker hardcodes the directories in LIBPATH if there ++ # are no directories specified by -L. ++ hardcode_minus_L=yes ++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then ++ # Neither direct hardcoding nor static linking is supported with a ++ # broken collect2. ++ hardcode_direct=unsupported ++ fi ++ ;; ++ ++ aix4* | aix5*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then ++ export_symbols_cmds='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' ++ else ++ export_symbols_cmds='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' ++ fi ++ aix_use_runtimelinking=no ++ ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[23]|aix4.[23].*|aix5*) ++ for ld_flag in $LDFLAGS; do ++ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then ++ aix_use_runtimelinking=yes ++ break ++ fi ++ done ++ ;; ++ esac ++ ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' ++ fi ++ ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++ ++ archive_cmds='' ++ hardcode_direct=yes ++ hardcode_libdir_separator=':' ++ link_all_deplibs=yes ++ ++ if test "$GCC" = yes; then ++ case $host_os in aix4.[012]|aix4.[012].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && \ ++ strings "$collect2name" | grep resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ hardcode_direct=yes ++ else ++ # We have old collect2 ++ hardcode_direct=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ hardcode_minus_L=yes ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_libdir_separator= ++ fi ++ ;; ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi ++ fi ++ fi ++ ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to export. ++ always_export_symbols=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ allow_undefined_flag='-berok' ++ # Determine the default libpath from the value encoded in an empty executable. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'`; fi ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ ++ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" ++ archive_expsym_cmds="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ hardcode_libdir_flag_spec='${wl}-R $libdir:/usr/lib:/lib' ++ allow_undefined_flag="-z nodefs" ++ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an empty executable. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'`; fi ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ ++ hardcode_libdir_flag_spec='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ no_undefined_flag=' ${wl}-bernotok' ++ allow_undefined_flag=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ whole_archive_flag_spec='$convenience' ++ archive_cmds_need_lc=yes ++ # This is similar to how AIX traditionally builds its shared libraries. ++ archive_expsym_cmds="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi ++ fi ++ ;; ++ ++ amigaos*) ++ archive_cmds='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ # see comment about different semantics on the GNU ld section ++ ld_shlibs=no ++ ;; ++ ++ bsdi[45]*) ++ export_dynamic_flag_spec=-rdynamic ++ ;; ++ ++ cygwin* | mingw* | pw32*) ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ # hardcode_libdir_flag_spec is actually meaningless, as there is ++ # no search path for DLLs. ++ hardcode_libdir_flag_spec=' ' ++ allow_undefined_flag=unsupported ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' ++ # The linker will automatically build a .lib file if we build a DLL. ++ old_archive_From_new_cmds='true' ++ # FIXME: Should let the user specify the lib program. ++ old_archive_cmds='lib /OUT:$oldlib$oldobjs$old_deplibs' ++ fix_srcfile_path='`cygpath -w "$srcfile"`' ++ enable_shared_with_static_runtimes=yes ++ ;; ++ ++ darwin* | rhapsody*) ++ case $host_os in ++ rhapsody* | darwin1.[012]) ++ allow_undefined_flag='${wl}-undefined ${wl}suppress' ++ ;; ++ *) # Darwin 1.3 on ++ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then ++ allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ else ++ case ${MACOSX_DEPLOYMENT_TARGET} in ++ 10.[012]) ++ allow_undefined_flag='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ ;; ++ 10.*) ++ allow_undefined_flag='${wl}-undefined ${wl}dynamic_lookup' ++ ;; ++ esac ++ fi ++ ;; ++ esac ++ archive_cmds_need_lc=no ++ hardcode_direct=no ++ hardcode_automatic=yes ++ hardcode_shlibpath_var=unsupported ++ whole_archive_flag_spec='' ++ link_all_deplibs=yes ++ if test "$GCC" = yes ; then ++ output_verbose_link_cmd='echo' ++ archive_cmds='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' ++ module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ else ++ case $cc_basename in ++ xlc*) ++ output_verbose_link_cmd='echo' ++ archive_cmds='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' ++ module_cmds='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ archive_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ module_expsym_cmds='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ ;; ++ *) ++ ld_shlibs=no ++ ;; ++ esac ++ fi ++ ;; ++ ++ dgux*) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_shlibpath_var=no ++ ;; ++ ++ freebsd1*) ++ ld_shlibs=no ++ ;; ++ ++ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor ++ # support. Future versions do this automatically, but an explicit c++rt0.o ++ # does not break anything, and helps significantly (at the cost of a little ++ # extra space). ++ freebsd2.2*) ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ # Unfortunately, older versions of FreeBSD 2 do not have this feature. ++ freebsd2*) ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=yes ++ hardcode_minus_L=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ # FreeBSD 3 and greater uses gcc -shared to do shared libraries. ++ freebsd* | dragonfly*) ++ archive_cmds='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ hpux9*) ++ if test "$GCC" = yes; then ++ archive_cmds='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ archive_cmds='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ fi ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator=: ++ hardcode_direct=yes ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ export_dynamic_flag_spec='${wl}-E' ++ ;; ++ ++ hpux10*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator=: ++ ++ hardcode_direct=yes ++ export_dynamic_flag_spec='${wl}-E' ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ fi ++ ;; ++ ++ hpux11*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ else ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) ++ hardcode_libdir_flag_spec_ld='+b $libdir' ++ hardcode_direct=no ++ hardcode_shlibpath_var=no ++ ;; ++ *) ++ hardcode_direct=yes ++ export_dynamic_flag_spec='${wl}-E' ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L=yes ++ ;; ++ esac ++ fi ++ ;; ++ ++ irix5* | irix6* | nonstopux*) ++ if test "$GCC" = yes; then ++ archive_cmds='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ archive_cmds='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ hardcode_libdir_flag_spec_ld='-rpath $libdir' ++ fi ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ link_all_deplibs=yes ++ ;; ++ ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out ++ else ++ archive_cmds='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF ++ fi ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ newsos6) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=yes ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ hardcode_shlibpath_var=no ++ ;; ++ ++ openbsd*) ++ hardcode_direct=yes ++ hardcode_shlibpath_var=no ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec='${wl}-E' ++ else ++ case $host_os in ++ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) ++ archive_cmds='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec='-R$libdir' ++ ;; ++ *) ++ archive_cmds='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec='${wl}-rpath,$libdir' ++ ;; ++ esac ++ fi ++ ;; ++ ++ os2*) ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_minus_L=yes ++ allow_undefined_flag=unsupported ++ archive_cmds='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' ++ old_archive_From_new_cmds='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ++ ;; ++ ++ osf3*) ++ if test "$GCC" = yes; then ++ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ allow_undefined_flag=' -expect_unresolved \*' ++ archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ fi ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator=: ++ ;; ++ ++ osf4* | osf5*) # as osf3* with the addition of -msym flag ++ if test "$GCC" = yes; then ++ allow_undefined_flag=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ hardcode_libdir_flag_spec='${wl}-rpath ${wl}$libdir' ++ else ++ allow_undefined_flag=' -expect_unresolved \*' ++ archive_cmds='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ archive_expsym_cmds='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ ++ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' ++ ++ # Both c and cxx compiler support -rpath directly ++ hardcode_libdir_flag_spec='-rpath $libdir' ++ fi ++ hardcode_libdir_separator=: ++ ;; ++ ++ solaris*) ++ no_undefined_flag=' -z text' ++ if test "$GCC" = yes; then ++ wlarc='${wl}' ++ archive_cmds='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ ++ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' ++ else ++ wlarc='' ++ archive_cmds='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ archive_expsym_cmds='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ ++ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' ++ fi ++ hardcode_libdir_flag_spec='-R$libdir' ++ hardcode_shlibpath_var=no ++ case $host_os in ++ solaris2.[0-5] | solaris2.[0-5].*) ;; ++ *) ++ # The compiler driver will combine linker options so we ++ # cannot just pass the convience library names through ++ # without $wl, iff we do not link with $LD. ++ # Luckily, gcc supports the same syntax we need for Sun Studio. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ case $wlarc in ++ '') ++ whole_archive_flag_spec='-z allextract$convenience -z defaultextract' ;; ++ *) ++ whole_archive_flag_spec='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; ++ esac ;; ++ esac ++ link_all_deplibs=yes ++ ;; ++ ++ sunos4*) ++ if test "x$host_vendor" = xsequent; then ++ # Use $CC to link under sequent, because it throws in some extra .o ++ # files that make .init and .fini sections work. ++ archive_cmds='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_direct=yes ++ hardcode_minus_L=yes ++ hardcode_shlibpath_var=no ++ ;; ++ ++ sysv4) ++ case $host_vendor in ++ sni) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=yes # is this really true??? ++ ;; ++ siemens) ++ ## LD is ld it makes a PLAMLIB ++ ## CC just makes a GrossModule. ++ archive_cmds='$LD -G -o $lib $libobjs $deplibs $linker_flags' ++ reload_cmds='$CC -r -o $output$reload_objs' ++ hardcode_direct=no ++ ;; ++ motorola) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct=no #Motorola manual says yes, but my tests say they lie ++ ;; ++ esac ++ runpath_var='LD_RUN_PATH' ++ hardcode_shlibpath_var=no ++ ;; ++ ++ sysv4.3*) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_shlibpath_var=no ++ export_dynamic_flag_spec='-Bexport' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_shlibpath_var=no ++ runpath_var=LD_RUN_PATH ++ hardcode_runpath_var=yes ++ ld_shlibs=yes ++ fi ++ ;; ++ ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*) ++ no_undefined_flag='${wl}-z,text' ++ archive_cmds_need_lc=no ++ hardcode_shlibpath_var=no ++ runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ archive_cmds='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; ++ ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ no_undefined_flag='${wl}-z,text' ++ allow_undefined_flag='${wl}-z,nodefs' ++ archive_cmds_need_lc=no ++ hardcode_shlibpath_var=no ++ hardcode_libdir_flag_spec='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' ++ hardcode_libdir_separator=':' ++ link_all_deplibs=yes ++ export_dynamic_flag_spec='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ archive_cmds='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; ++ ++ uts4*) ++ archive_cmds='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec='-L$libdir' ++ hardcode_shlibpath_var=no ++ ;; ++ ++ *) ++ ld_shlibs=no ++ ;; ++ esac ++ fi ++ ++{ echo "$as_me:$LINENO: result: $ld_shlibs" >&5 ++echo "${ECHO_T}$ld_shlibs" >&6; } ++test "$ld_shlibs" = no && can_build_shared=no ++ ++# ++# Do we need to explicitly link libc? ++# ++case "x$archive_cmds_need_lc" in ++x|xyes) ++ # Assume -lc should be added ++ archive_cmds_need_lc=yes ++ ++ if test "$enable_shared" = yes && test "$GCC" = yes; then ++ case $archive_cmds in ++ *'~'*) ++ # FIXME: we may have to deal with multi-command sequences. ++ ;; ++ '$CC '*) ++ # Test whether the compiler implicitly links with -lc since on some ++ # systems, -lgcc has to come before -lc. If gcc already passes -lc ++ # to ld, don't add -lc before -lgcc. ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } ++ $rm conftest* ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } 2>conftest.err; then ++ soname=conftest ++ lib=conftest ++ libobjs=conftest.$ac_objext ++ deplibs= ++ wl=$lt_prog_compiler_wl ++ pic_flag=$lt_prog_compiler_pic ++ compiler_flags=-v ++ linker_flags=-v ++ verstring= ++ output_objdir=. ++ libname=conftest ++ lt_save_allow_undefined_flag=$allow_undefined_flag ++ allow_undefined_flag= ++ if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 ++ (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++ then ++ archive_cmds_need_lc=no ++ else ++ archive_cmds_need_lc=yes ++ fi ++ allow_undefined_flag=$lt_save_allow_undefined_flag ++ else ++ cat conftest.err 1>&5 ++ fi ++ $rm conftest* ++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc" >&6; } ++ ;; ++ esac ++ fi ++ ;; ++esac ++ ++{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } ++library_names_spec= ++libname_spec='lib$name' ++soname_spec= ++shrext_cmds=".so" ++postinstall_cmds= ++postuninstall_cmds= ++finish_cmds= ++finish_eval= ++shlibpath_var= ++shlibpath_overrides_runpath=unknown ++version_type=none ++dynamic_linker="$host_os ld.so" ++sys_lib_dlsearch_path_spec="/lib /usr/lib" ++if test "$GCC" = yes; then ++ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then ++ # if the path contains ";" then we assume it to be the separator ++ # otherwise default to the standard path separator (i.e. ":") - it is ++ # assumed that no part of a normal pathname contains ";" but that should ++ # okay in the real world where ";" in dirpaths is itself problematic. ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++else ++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" ++fi ++need_lib_prefix=unknown ++hardcode_into_libs=no ++ ++# when you set need_version to no, make sure it does not cause -set_version ++# flags to be left without arguments ++need_version=unknown ++ ++case $host_os in ++aix3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' ++ shlibpath_var=LIBPATH ++ ++ # AIX 3 has no versioning support, so we append a major version to the name. ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ ++aix4* | aix5*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ hardcode_into_libs=yes ++ if test "$host_cpu" = ia64; then ++ # AIX 5 supports IA64 ++ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ else ++ # With GCC up to 2.95.x, collect2 would create an import file ++ # for dependence libraries. The import file would start with ++ # the line `#! .'. This would cause the generated library to ++ # depend on `.', always an invalid library. This was fixed in ++ # development snapshots of GCC prior to 3.0. ++ case $host_os in ++ aix4 | aix4.[01] | aix4.[01].*) ++ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' ++ echo ' yes ' ++ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then ++ : ++ else ++ can_build_shared=no ++ fi ++ ;; ++ esac ++ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct ++ # soname into executable. Probably we can add versioning support to ++ # collect2, so additional links can be useful in future. ++ if test "$aix_use_runtimelinking" = yes; then ++ # If using run time linking (on AIX 4.2 or later) use lib.so ++ # instead of lib.a to let people know that these are not ++ # typical AIX shared libraries. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ else ++ # We preserve .a as extension for shared libraries through AIX4.2 ++ # and later when we are not doing run time linking. ++ library_names_spec='${libname}${release}.a $libname.a' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ fi ++ shlibpath_var=LIBPATH ++ fi ++ ;; ++ ++amigaos*) ++ library_names_spec='$libname.ixlibrary $libname.a' ++ # Create ${libname}_ixlibrary.a entries in /sys/libs. ++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ++ ;; ++ ++beos*) ++ library_names_spec='${libname}${shared_ext}' ++ dynamic_linker="$host_os ld.so" ++ shlibpath_var=LIBRARY_PATH ++ ;; ++ ++bsdi[45]*) ++ version_type=linux ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" ++ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" ++ # the default ld.so.conf also contains /usr/contrib/lib and ++ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow ++ # libtool to hard-code these into programs ++ ;; ++ ++cygwin* | mingw* | pw32*) ++ version_type=windows ++ shrext_cmds=".dll" ++ need_version=no ++ need_lib_prefix=no ++ ++ case $GCC,$host_os in ++ yes,cygwin* | yes,mingw* | yes,pw32*) ++ library_names_spec='$libname.dll.a' ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ ++ dldir=$destdir/`dirname \$dlpath`~ ++ test -d \$dldir || mkdir -p \$dldir~ ++ $install_prog $dir/$dlname \$dldir/$dlname~ ++ chmod a+x \$dldir/$dlname' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ dlpath=$dir/\$dldll~ ++ $rm \$dlpath' ++ shlibpath_overrides_runpath=yes ++ ++ case $host_os in ++ cygwin*) ++ # Cygwin DLLs use 'cyg' prefix rather than 'lib' ++ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ++ ;; ++ mingw*) ++ # MinGW DLLs use traditional 'lib' prefix ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then ++ # It is most probably a Windows format PATH printed by ++ # mingw gcc, but we are running on Cygwin. Gcc prints its search ++ # path with ; separators, and with drive letters. We can handle the ++ # drive letters (cygwin fileutils understands them), so leave them, ++ # especially as we might pass files found there to a mingw objdump, ++ # which wouldn't understand a cygwinified path. Ahh. ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ ;; ++ pw32*) ++ # pw32 DLLs use 'pw' prefix rather than 'lib' ++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ ;; ++ esac ++ ;; ++ ++ *) ++ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ ;; ++ esac ++ dynamic_linker='Win32 ld.exe' ++ # FIXME: first we should search . and the directory the executable is in ++ shlibpath_var=PATH ++ ;; ++ ++darwin* | rhapsody*) ++ dynamic_linker="$host_os dyld" ++ version_type=darwin ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' ++ soname_spec='${libname}${release}${major}$shared_ext' ++ shlibpath_overrides_runpath=yes ++ shlibpath_var=DYLD_LIBRARY_PATH ++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' ++ # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. ++ if test "$GCC" = yes; then ++ sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` ++ else ++ sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' ++ fi ++ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ++ ;; ++ ++dgux*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; ++ ++freebsd1*) ++ dynamic_linker=no ++ ;; ++ ++freebsd* | dragonfly*) ++ # DragonFly does not have aout. When/if they implement a new ++ # versioning mechanism, adjust this. ++ if test -x /usr/bin/objformat; then ++ objformat=`/usr/bin/objformat` ++ else ++ case $host_os in ++ freebsd[123]*) objformat=aout ;; ++ *) objformat=elf ;; ++ esac ++ fi ++ version_type=freebsd-$objformat ++ case $version_type in ++ freebsd-elf*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ need_version=no ++ need_lib_prefix=no ++ ;; ++ freebsd-*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' ++ need_version=yes ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_os in ++ freebsd2*) ++ shlibpath_overrides_runpath=yes ++ ;; ++ freebsd3.[01]* | freebsdelf3.[01]*) ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ ++ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ freebsd*) # from 4.6 on ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ esac ++ ;; ++ ++gnu*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ ;; ++ ++hpux9* | hpux10* | hpux11*) ++ # Give a soname corresponding to the major version so that dld.sl refuses to ++ # link against other versions. ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ case $host_cpu in ++ ia64*) ++ shrext_cmds='.so' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.so" ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ if test "X$HPUX_IA64_MODE" = X32; then ++ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" ++ else ++ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" ++ fi ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ hppa*64*) ++ shrext_cmds='.sl' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ *) ++ shrext_cmds='.sl' ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=SHLIB_PATH ++ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ esac ++ # HP-UX runs *really* slowly unless shared libraries are mode 555. ++ postinstall_cmds='chmod 555 $lib' ++ ;; ++ ++interix3*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ ++irix5* | irix6* | nonstopux*) ++ case $host_os in ++ nonstopux*) version_type=nonstopux ;; ++ *) ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ version_type=linux ++ else ++ version_type=irix ++ fi ;; ++ esac ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' ++ case $host_os in ++ irix5* | nonstopux*) ++ libsuff= shlibsuff= ++ ;; ++ *) ++ case $LD in # libtool.m4 will add one of these switches to LD ++ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") ++ libsuff= shlibsuff= libmagic=32-bit;; ++ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") ++ libsuff=32 shlibsuff=N32 libmagic=N32;; ++ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") ++ libsuff=64 shlibsuff=64 libmagic=64-bit;; ++ *) libsuff= shlibsuff= libmagic=never-match;; ++ esac ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" ++ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ++ hardcode_into_libs=yes ++ ;; ++ ++# No shared lib support for Linux oldld, aout, or coff. ++linux*oldld* | linux*aout* | linux*coff*) ++ dynamic_linker=no ++ ;; ++ ++# This must be Linux ELF. ++linux* | k*bsd*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ # This implies no fast_install, which is unacceptable. ++ # Some rework will be needed to allow for fast_install ++ # before this can be enabled. ++ hardcode_into_libs=yes ++ ++ # Append ld.so.conf contents to the search path ++ if test -f /etc/ld.so.conf; then ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" ++ fi ++ ++ # We used to test for /lib/ld.so.1 and disable shared libraries on ++ # powerpc, because MkLinux only supported shared libraries with the ++ # GNU dynamic linker. Since this was broken with cross compilers, ++ # most powerpc-linux boxes support dynamic linking these days and ++ # people can always --disable-shared, the test was removed, and we ++ # assume the GNU/Linux dynamic linker is in use. ++ dynamic_linker='GNU/Linux ld.so' ++ ;; ++ ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; ++ ++netbsd*) ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ dynamic_linker='NetBSD (a.out) ld.so' ++ else ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='NetBSD ld.elf_so' ++ fi ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ ++newsos6) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; ++ ++nto-qnx*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; ++ ++openbsd*) ++ version_type=sunos ++ sys_lib_dlsearch_path_spec="/usr/lib" ++ need_lib_prefix=no ++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. ++ case $host_os in ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; ++ esac ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ case $host_os in ++ openbsd2.[89] | openbsd2.[89].*) ++ shlibpath_overrides_runpath=no ++ ;; ++ *) ++ shlibpath_overrides_runpath=yes ++ ;; ++ esac ++ else ++ shlibpath_overrides_runpath=yes ++ fi ++ ;; ++ ++os2*) ++ libname_spec='$name' ++ shrext_cmds=".dll" ++ need_lib_prefix=no ++ library_names_spec='$libname${shared_ext} $libname.a' ++ dynamic_linker='OS/2 ld.exe' ++ shlibpath_var=LIBPATH ++ ;; ++ ++osf3* | osf4* | osf5*) ++ version_type=osf ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" ++ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ++ ;; ++ ++solaris*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ # ldd complains unless libraries are executable ++ postinstall_cmds='chmod +x $lib' ++ ;; ++ ++sunos4*) ++ version_type=sunos ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ if test "$with_gnu_ld" = yes; then ++ need_lib_prefix=no ++ fi ++ need_version=yes ++ ;; ++ ++sysv4 | sysv4.3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_vendor in ++ sni) ++ shlibpath_overrides_runpath=no ++ need_lib_prefix=no ++ export_dynamic_flag_spec='${wl}-Blargedynsym' ++ runpath_var=LD_RUN_PATH ++ ;; ++ siemens) ++ need_lib_prefix=no ++ ;; ++ motorola) ++ need_lib_prefix=no ++ need_version=no ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ++ ;; ++ esac ++ ;; ++ ++sysv4*MP*) ++ if test -d /usr/nec ;then ++ version_type=linux ++ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' ++ soname_spec='$libname${shared_ext}.$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ fi ++ ;; ++ ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ version_type=freebsd-elf ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ if test "$with_gnu_ld" = yes; then ++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' ++ shlibpath_overrides_runpath=no ++ else ++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' ++ shlibpath_overrides_runpath=yes ++ case $host_os in ++ sco3.2v5*) ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ++ ;; ++ esac ++ fi ++ sys_lib_dlsearch_path_spec='/usr/lib' ++ ;; ++ ++uts4*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; ++ ++*) ++ dynamic_linker=no ++ ;; ++esac ++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6; } ++test "$dynamic_linker" = no && can_build_shared=no ++ ++variables_saved_for_relink="PATH $shlibpath_var $runpath_var" ++if test "$GCC" = yes; then ++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" ++fi ++ ++{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } ++hardcode_action= ++if test -n "$hardcode_libdir_flag_spec" || \ ++ test -n "$runpath_var" || \ ++ test "X$hardcode_automatic" = "Xyes" ; then ++ ++ # We can hardcode non-existant directories. ++ if test "$hardcode_direct" != no && ++ # If the only mechanism to avoid hardcoding is shlibpath_var, we ++ # have to relink, otherwise we might link with an installed library ++ # when we should be linking with a yet-to-be-installed one ++ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, )" != no && ++ test "$hardcode_minus_L" != no; then ++ # Linking always hardcodes the temporary library directory. ++ hardcode_action=relink ++ else ++ # We can link without hardcoding, and we can hardcode nonexisting dirs. ++ hardcode_action=immediate ++ fi ++else ++ # We cannot hardcode anything, or else we can only hardcode existing ++ # directories. ++ hardcode_action=unsupported ++fi ++{ echo "$as_me:$LINENO: result: $hardcode_action" >&5 ++echo "${ECHO_T}$hardcode_action" >&6; } ++ ++if test "$hardcode_action" = relink; then ++ # Fast installation is not supported ++ enable_fast_install=no ++elif test "$shlibpath_overrides_runpath" = yes || ++ test "$enable_shared" = no; then ++ # Fast installation is not necessary ++ enable_fast_install=needless ++fi ++ ++striplib= ++old_striplib= ++{ echo "$as_me:$LINENO: checking whether stripping libraries is possible" >&5 ++echo $ECHO_N "checking whether stripping libraries is possible... $ECHO_C" >&6; } ++if test -n "$STRIP" && $STRIP -V 2>&1 | grep "GNU strip" >/dev/null; then ++ test -z "$old_striplib" && old_striplib="$STRIP --strip-debug" ++ test -z "$striplib" && striplib="$STRIP --strip-unneeded" ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++else ++# FIXME - insert some real tests, host_os isn't really good enough ++ case $host_os in ++ darwin*) ++ if test -n "$STRIP" ; then ++ striplib="$STRIP -x" ++ { echo "$as_me:$LINENO: result: yes" >&5 ++echo "${ECHO_T}yes" >&6; } ++ else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++ ;; ++ *) ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++ ;; ++ esac ++fi ++ ++if test "x$enable_dlopen" != xyes; then ++ enable_dlopen=unknown ++ enable_dlopen_self=unknown ++ enable_dlopen_self_static=unknown ++else ++ lt_cv_dlopen=no ++ lt_cv_dlopen_libs= ++ ++ case $host_os in ++ beos*) ++ lt_cv_dlopen="load_add_on" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes ++ ;; ++ ++ mingw* | pw32*) ++ lt_cv_dlopen="LoadLibrary" ++ lt_cv_dlopen_libs= ++ ;; ++ ++ cygwin*) ++ lt_cv_dlopen="dlopen" ++ lt_cv_dlopen_libs= ++ ;; ++ ++ darwin*) ++ # if libdl is installed we need to link against it ++ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 ++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dl_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dl_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_dl_dlopen=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } ++if test $ac_cv_lib_dl_dlopen = yes; then ++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" ++else ++ ++ lt_cv_dlopen="dyld" ++ lt_cv_dlopen_libs= ++ lt_cv_dlopen_self=yes ++ ++fi ++ ++ ;; ++ ++ *) ++ { echo "$as_me:$LINENO: checking for shl_load" >&5 ++echo $ECHO_N "checking for shl_load... $ECHO_C" >&6; } ++if test "${ac_cv_func_shl_load+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define shl_load to an innocuous variant, in case declares shl_load. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define shl_load innocuous_shl_load ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char shl_load (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef shl_load ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char shl_load (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_shl_load || defined __stub___shl_load ++choke me ++#endif ++ ++int ++main () ++{ ++return shl_load (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_shl_load=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_shl_load=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 ++echo "${ECHO_T}$ac_cv_func_shl_load" >&6; } ++if test $ac_cv_func_shl_load = yes; then ++ lt_cv_dlopen="shl_load" ++else ++ { echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 ++echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dld_shl_load+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldld $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char shl_load (); ++int ++main () ++{ ++return shl_load (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dld_shl_load=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_dld_shl_load=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 ++echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6; } ++if test $ac_cv_lib_dld_shl_load = yes; then ++ lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" ++else ++ { echo "$as_me:$LINENO: checking for dlopen" >&5 ++echo $ECHO_N "checking for dlopen... $ECHO_C" >&6; } ++if test "${ac_cv_func_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++/* Define dlopen to an innocuous variant, in case declares dlopen. ++ For example, HP-UX 11i declares gettimeofday. */ ++#define dlopen innocuous_dlopen ++ ++/* System header to define __stub macros and hopefully few prototypes, ++ which can conflict with char dlopen (); below. ++ Prefer to if __STDC__ is defined, since ++ exists even on freestanding compilers. */ ++ ++#ifdef __STDC__ ++# include ++#else ++# include ++#endif ++ ++#undef dlopen ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++/* The GNU C library defines this for functions which it implements ++ to always fail with ENOSYS. Some functions are actually named ++ something starting with __ and the normal name is an alias. */ ++#if defined __stub_dlopen || defined __stub___dlopen ++choke me ++#endif ++ ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_func_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_func_dlopen=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_func_dlopen" >&6; } ++if test $ac_cv_func_dlopen = yes; then ++ lt_cv_dlopen="dlopen" ++else ++ { echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 ++echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dl_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldl $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dl_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_dl_dlopen=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6; } ++if test $ac_cv_lib_dl_dlopen = yes; then ++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" ++else ++ { echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 ++echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6; } ++if test "${ac_cv_lib_svld_dlopen+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-lsvld $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dlopen (); ++int ++main () ++{ ++return dlopen (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_svld_dlopen=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_svld_dlopen=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 ++echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6; } ++if test $ac_cv_lib_svld_dlopen = yes; then ++ lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" ++else ++ { echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 ++echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6; } ++if test "${ac_cv_lib_dld_dld_link+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ ac_check_lib_save_LIBS=$LIBS ++LIBS="-ldld $LIBS" ++cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++/* Override any GCC internal prototype to avoid an error. ++ Use char because int might match the return type of a GCC ++ builtin and then its argument prototype would still apply. */ ++#ifdef __cplusplus ++extern "C" ++#endif ++char dld_link (); ++int ++main () ++{ ++return dld_link (); ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ac_cv_lib_dld_dld_link=yes ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ac_cv_lib_dld_dld_link=no ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++LIBS=$ac_check_lib_save_LIBS ++fi ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 ++echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6; } ++if test $ac_cv_lib_dld_dld_link = yes; then ++ lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" ++fi ++ ++ ++fi ++ ++ ++fi ++ ++ ++fi ++ ++ ++fi ++ ++ ++fi ++ ++ ;; ++ esac ++ ++ if test "x$lt_cv_dlopen" != xno; then ++ enable_dlopen=yes ++ else ++ enable_dlopen=no ++ fi ++ ++ case $lt_cv_dlopen in ++ dlopen) ++ save_CPPFLAGS="$CPPFLAGS" ++ test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" ++ ++ save_LDFLAGS="$LDFLAGS" ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" ++ ++ save_LIBS="$LIBS" ++ LIBS="$lt_cv_dlopen_libs $LIBS" ++ ++ { echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 ++echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6; } ++if test "${lt_cv_dlopen_self+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test "$cross_compiling" = yes; then : ++ lt_cv_dlopen_self=cross ++else ++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 ++ lt_status=$lt_dlunknown ++ cat > conftest.$ac_ext < ++#endif ++ ++#include ++ ++#ifdef RTLD_GLOBAL ++# define LT_DLGLOBAL RTLD_GLOBAL ++#else ++# ifdef DL_GLOBAL ++# define LT_DLGLOBAL DL_GLOBAL ++# else ++# define LT_DLGLOBAL 0 ++# endif ++#endif ++ ++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we ++ find out it does not work in some platform. */ ++#ifndef LT_DLLAZY_OR_NOW ++# ifdef RTLD_LAZY ++# define LT_DLLAZY_OR_NOW RTLD_LAZY ++# else ++# ifdef DL_LAZY ++# define LT_DLLAZY_OR_NOW DL_LAZY ++# else ++# ifdef RTLD_NOW ++# define LT_DLLAZY_OR_NOW RTLD_NOW ++# else ++# ifdef DL_NOW ++# define LT_DLLAZY_OR_NOW DL_NOW ++# else ++# define LT_DLLAZY_OR_NOW 0 ++# endif ++# endif ++# endif ++# endif ++#endif ++ ++#ifdef __cplusplus ++extern "C" void exit (int); ++#endif ++ ++void fnord() { int i=42;} ++int main () ++{ ++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); ++ int status = $lt_dlunknown; ++ ++ if (self) ++ { ++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore; ++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; ++ /* dlclose (self); */ ++ } ++ else ++ puts (dlerror ()); ++ ++ exit (status); ++} ++EOF ++ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then ++ (./conftest; exit; ) >&5 2>/dev/null ++ lt_status=$? ++ case x$lt_status in ++ x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; ++ x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; ++ x$lt_dlunknown|x*) lt_cv_dlopen_self=no ;; ++ esac ++ else : ++ # compilation failed ++ lt_cv_dlopen_self=no ++ fi ++fi ++rm -fr conftest* ++ ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 ++echo "${ECHO_T}$lt_cv_dlopen_self" >&6; } ++ ++ if test "x$lt_cv_dlopen_self" = xyes; then ++ wl=$lt_prog_compiler_wl eval LDFLAGS=\"\$LDFLAGS $lt_prog_compiler_static\" ++ { echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 ++echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6; } ++if test "${lt_cv_dlopen_self_static+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test "$cross_compiling" = yes; then : ++ lt_cv_dlopen_self_static=cross ++else ++ lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 ++ lt_status=$lt_dlunknown ++ cat > conftest.$ac_ext < ++#endif ++ ++#include ++ ++#ifdef RTLD_GLOBAL ++# define LT_DLGLOBAL RTLD_GLOBAL ++#else ++# ifdef DL_GLOBAL ++# define LT_DLGLOBAL DL_GLOBAL ++# else ++# define LT_DLGLOBAL 0 ++# endif ++#endif ++ ++/* We may have to define LT_DLLAZY_OR_NOW in the command line if we ++ find out it does not work in some platform. */ ++#ifndef LT_DLLAZY_OR_NOW ++# ifdef RTLD_LAZY ++# define LT_DLLAZY_OR_NOW RTLD_LAZY ++# else ++# ifdef DL_LAZY ++# define LT_DLLAZY_OR_NOW DL_LAZY ++# else ++# ifdef RTLD_NOW ++# define LT_DLLAZY_OR_NOW RTLD_NOW ++# else ++# ifdef DL_NOW ++# define LT_DLLAZY_OR_NOW DL_NOW ++# else ++# define LT_DLLAZY_OR_NOW 0 ++# endif ++# endif ++# endif ++# endif ++#endif ++ ++#ifdef __cplusplus ++extern "C" void exit (int); ++#endif ++ ++void fnord() { int i=42;} ++int main () ++{ ++ void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); ++ int status = $lt_dlunknown; ++ ++ if (self) ++ { ++ if (dlsym (self,"fnord")) status = $lt_dlno_uscore; ++ else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; ++ /* dlclose (self); */ ++ } ++ else ++ puts (dlerror ()); ++ ++ exit (status); ++} ++EOF ++ if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 ++ (eval $ac_link) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then ++ (./conftest; exit; ) >&5 2>/dev/null ++ lt_status=$? ++ case x$lt_status in ++ x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; ++ x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; ++ x$lt_dlunknown|x*) lt_cv_dlopen_self_static=no ;; ++ esac ++ else : ++ # compilation failed ++ lt_cv_dlopen_self_static=no ++ fi ++fi ++rm -fr conftest* ++ ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 ++echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6; } ++ fi ++ ++ CPPFLAGS="$save_CPPFLAGS" ++ LDFLAGS="$save_LDFLAGS" ++ LIBS="$save_LIBS" ++ ;; ++ esac ++ ++ case $lt_cv_dlopen_self in ++ yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; ++ *) enable_dlopen_self=unknown ;; ++ esac ++ ++ case $lt_cv_dlopen_self_static in ++ yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; ++ *) enable_dlopen_self_static=unknown ;; ++ esac ++fi ++ ++ ++# Report which library types will actually be built ++{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 ++echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: result: $can_build_shared" >&5 ++echo "${ECHO_T}$can_build_shared" >&6; } ++ ++{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 ++echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } ++test "$can_build_shared" = "no" && enable_shared=no ++ ++# On AIX, shared libraries and static libraries use the same namespace, and ++# are all built from PIC. ++case $host_os in ++aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' ++ fi ++ ;; ++ ++aix4* | aix5*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi ++ ;; ++esac ++{ echo "$as_me:$LINENO: result: $enable_shared" >&5 ++echo "${ECHO_T}$enable_shared" >&6; } ++ ++{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5 ++echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } ++# Make sure either enable_shared or enable_static is yes. ++test "$enable_shared" = yes || enable_static=yes ++{ echo "$as_me:$LINENO: result: $enable_static" >&5 ++echo "${ECHO_T}$enable_static" >&6; } ++ ++# The else clause should only fire when bootstrapping the ++# libtool distribution, otherwise you forgot to ship ltmain.sh ++# with your package, and you will get complaints that there are ++# no rules to generate ltmain.sh. ++if test -f "$ltmain"; then ++ # See if we are running on zsh, and set the options which allow our commands through ++ # without removal of \ escapes. ++ if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++ fi ++ # Now quote all the things that may contain metacharacters while being ++ # careful not to overquote the AC_SUBSTed values. We take copies of the ++ # variables and quote the copies for generation of the libtool script. ++ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ ++ SED SHELL STRIP \ ++ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ ++ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ ++ deplibs_check_method reload_flag reload_cmds need_locks \ ++ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ ++ lt_cv_sys_global_symbol_to_c_name_address \ ++ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ ++ old_postinstall_cmds old_postuninstall_cmds \ ++ compiler \ ++ CC \ ++ LD \ ++ lt_prog_compiler_wl \ ++ lt_prog_compiler_pic \ ++ lt_prog_compiler_static \ ++ lt_prog_compiler_no_builtin_flag \ ++ export_dynamic_flag_spec \ ++ thread_safe_flag_spec \ ++ whole_archive_flag_spec \ ++ enable_shared_with_static_runtimes \ ++ old_archive_cmds \ ++ old_archive_from_new_cmds \ ++ predep_objects \ ++ postdep_objects \ ++ predeps \ ++ postdeps \ ++ compiler_lib_search_path \ ++ archive_cmds \ ++ archive_expsym_cmds \ ++ postinstall_cmds \ ++ postuninstall_cmds \ ++ old_archive_from_expsyms_cmds \ ++ allow_undefined_flag \ ++ no_undefined_flag \ ++ export_symbols_cmds \ ++ hardcode_libdir_flag_spec \ ++ hardcode_libdir_flag_spec_ld \ ++ hardcode_libdir_separator \ ++ hardcode_automatic \ ++ module_cmds \ ++ module_expsym_cmds \ ++ lt_cv_prog_compiler_c_o \ ++ exclude_expsyms \ ++ include_expsyms; do ++ ++ case $var in ++ old_archive_cmds | \ ++ old_archive_from_new_cmds | \ ++ archive_cmds | \ ++ archive_expsym_cmds | \ ++ module_cmds | \ ++ module_expsym_cmds | \ ++ old_archive_from_expsyms_cmds | \ ++ export_symbols_cmds | \ ++ extract_expsyms_cmds | reload_cmds | finish_cmds | \ ++ postinstall_cmds | postuninstall_cmds | \ ++ old_postinstall_cmds | old_postuninstall_cmds | \ ++ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) ++ # Double-quote double-evaled strings. ++ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ++ ;; ++ *) ++ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ++ ;; ++ esac ++ done ++ ++ case $lt_echo in ++ *'\$0 --fallback-echo"') ++ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` ++ ;; ++ esac ++ ++cfgfile="${ofile}T" ++ trap "$rm \"$cfgfile\"; exit 1" 1 2 15 ++ $rm -f "$cfgfile" ++ { echo "$as_me:$LINENO: creating $ofile" >&5 ++echo "$as_me: creating $ofile" >&6;} ++ ++ cat <<__EOF__ >> "$cfgfile" ++#! $SHELL ++ ++# `$echo "$cfgfile" | sed 's%^.*/%%'` - Provide generalized library-building support services. ++# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) ++# NOTE: Changes made to this file will be lost: look at ltmain.sh. ++# ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 ++# Free Software Foundation, Inc. ++# ++# This file is part of GNU Libtool: ++# Originally by Gordon Matzigkeit , 1996 ++# ++# This program is free software; you can redistribute it and/or modify ++# it under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2 of the License, or ++# (at your option) any later version. ++# ++# This program is distributed in the hope that it will be useful, but ++# WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU ++# General Public License for more details. ++# ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. ++# ++# As a special exception to the GNU General Public License, if you ++# distribute this file as part of a program that contains a ++# configuration script generated by Autoconf, you may include it under ++# the same distribution terms that you use for the rest of that program. ++ ++# A sed program that does not truncate output. ++SED=$lt_SED ++ ++# Sed that helps us avoid accidentally triggering echo(1) options like -n. ++Xsed="$SED -e 1s/^X//" ++ ++# The HP-UX ksh and POSIX shell print the target directory to stdout ++# if CDPATH is set. ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH ++ ++# The names of the tagged configurations supported by this script. ++available_tags= ++ ++# ### BEGIN LIBTOOL CONFIG ++ ++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++ ++# Shell to use when invoking shell scripts. ++SHELL=$lt_SHELL ++ ++# Whether or not to build shared libraries. ++build_libtool_libs=$enable_shared ++ ++# Whether or not to build static libraries. ++build_old_libs=$enable_static ++ ++# Whether or not to add -lc for building shared libraries. ++build_libtool_need_lc=$archive_cmds_need_lc ++ ++# Whether or not to disallow shared libs when runtime libs are static ++allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes ++ ++# Whether or not to optimize for fast installation. ++fast_install=$enable_fast_install ++ ++# The host system. ++host_alias=$host_alias ++host=$host ++host_os=$host_os ++ ++# The build system. ++build_alias=$build_alias ++build=$build ++build_os=$build_os ++ ++# An echo program that does not interpret backslashes. ++echo=$lt_echo ++ ++# The archiver. ++AR=$lt_AR ++AR_FLAGS=$lt_AR_FLAGS ++ ++# A C compiler. ++LTCC=$lt_LTCC ++ ++# LTCC compiler flags. ++LTCFLAGS=$lt_LTCFLAGS ++ ++# A language-specific compiler. ++CC=$lt_compiler ++ ++# Is the compiler the GNU C compiler? ++with_gcc=$GCC ++ ++# An ERE matcher. ++EGREP=$lt_EGREP ++ ++# The linker used to build libraries. ++LD=$lt_LD ++ ++# Whether we need hard or soft links. ++LN_S=$lt_LN_S ++ ++# A BSD-compatible nm program. ++NM=$lt_NM ++ ++# A symbol stripping program ++STRIP=$lt_STRIP ++ ++# Used to examine libraries when file_magic_cmd begins "file" ++MAGIC_CMD=$MAGIC_CMD ++ ++# Used on cygwin: DLL creation program. ++DLLTOOL="$DLLTOOL" ++ ++# Used on cygwin: object dumper. ++OBJDUMP="$OBJDUMP" ++ ++# Used on cygwin: assembler. ++AS="$AS" ++ ++# The name of the directory that contains temporary libtool files. ++objdir=$objdir ++ ++# How to create reloadable object files. ++reload_flag=$lt_reload_flag ++reload_cmds=$lt_reload_cmds ++ ++# How to pass a linker flag through the compiler. ++wl=$lt_lt_prog_compiler_wl ++ ++# Object file suffix (normally "o"). ++objext="$ac_objext" ++ ++# Old archive suffix (normally "a"). ++libext="$libext" ++ ++# Shared library suffix (normally ".so"). ++shrext_cmds='$shrext_cmds' ++ ++# Executable file suffix (normally ""). ++exeext="$exeext" ++ ++# Additional compiler flags for building library objects. ++pic_flag=$lt_lt_prog_compiler_pic ++pic_mode=$pic_mode ++ ++# What is the maximum length of a command? ++max_cmd_len=$lt_cv_sys_max_cmd_len ++ ++# Does compiler simultaneously support -c and -o options? ++compiler_c_o=$lt_lt_cv_prog_compiler_c_o ++ ++# Must we lock files when doing compilation? ++need_locks=$lt_need_locks ++ ++# Do we need the lib prefix for modules? ++need_lib_prefix=$need_lib_prefix ++ ++# Do we need a version for libraries? ++need_version=$need_version ++ ++# Whether dlopen is supported. ++dlopen_support=$enable_dlopen ++ ++# Whether dlopen of programs is supported. ++dlopen_self=$enable_dlopen_self ++ ++# Whether dlopen of statically linked programs is supported. ++dlopen_self_static=$enable_dlopen_self_static ++ ++# Compiler flag to prevent dynamic linking. ++link_static_flag=$lt_lt_prog_compiler_static ++ ++# Compiler flag to turn off builtin functions. ++no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag ++ ++# Compiler flag to allow reflexive dlopens. ++export_dynamic_flag_spec=$lt_export_dynamic_flag_spec ++ ++# Compiler flag to generate shared objects directly from archives. ++whole_archive_flag_spec=$lt_whole_archive_flag_spec ++ ++# Compiler flag to generate thread-safe objects. ++thread_safe_flag_spec=$lt_thread_safe_flag_spec ++ ++# Library versioning type. ++version_type=$version_type ++ ++# Format of library name prefix. ++libname_spec=$lt_libname_spec ++ ++# List of archive names. First name is the real one, the rest are links. ++# The last name is the one that the linker finds with -lNAME. ++library_names_spec=$lt_library_names_spec ++ ++# The coded name of the library, if different from the real name. ++soname_spec=$lt_soname_spec ++ ++# Commands used to build and install an old-style archive. ++RANLIB=$lt_RANLIB ++old_archive_cmds=$lt_old_archive_cmds ++old_postinstall_cmds=$lt_old_postinstall_cmds ++old_postuninstall_cmds=$lt_old_postuninstall_cmds ++ ++# Create an old-style archive from a shared archive. ++old_archive_from_new_cmds=$lt_old_archive_from_new_cmds ++ ++# Create a temporary old-style archive to link instead of a shared archive. ++old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds ++ ++# Commands used to build and install a shared archive. ++archive_cmds=$lt_archive_cmds ++archive_expsym_cmds=$lt_archive_expsym_cmds ++postinstall_cmds=$lt_postinstall_cmds ++postuninstall_cmds=$lt_postuninstall_cmds ++ ++# Commands used to build a loadable module (assumed same as above if empty) ++module_cmds=$lt_module_cmds ++module_expsym_cmds=$lt_module_expsym_cmds ++ ++# Commands to strip libraries. ++old_striplib=$lt_old_striplib ++striplib=$lt_striplib ++ ++# Dependencies to place before the objects being linked to create a ++# shared library. ++predep_objects=$lt_predep_objects ++ ++# Dependencies to place after the objects being linked to create a ++# shared library. ++postdep_objects=$lt_postdep_objects ++ ++# Dependencies to place before the objects being linked to create a ++# shared library. ++predeps=$lt_predeps ++ ++# Dependencies to place after the objects being linked to create a ++# shared library. ++postdeps=$lt_postdeps ++ ++# The library search path used internally by the compiler when linking ++# a shared library. ++compiler_lib_search_path=$lt_compiler_lib_search_path ++ ++# Method to check whether dependent libraries are shared objects. ++deplibs_check_method=$lt_deplibs_check_method ++ ++# Command to use when deplibs_check_method == file_magic. ++file_magic_cmd=$lt_file_magic_cmd ++ ++# Flag that allows shared libraries with undefined symbols to be built. ++allow_undefined_flag=$lt_allow_undefined_flag ++ ++# Flag that forces no undefined symbols. ++no_undefined_flag=$lt_no_undefined_flag ++ ++# Commands used to finish a libtool library installation in a directory. ++finish_cmds=$lt_finish_cmds ++ ++# Same as above, but a single script fragment to be evaled but not shown. ++finish_eval=$lt_finish_eval ++ ++# Take the output of nm and produce a listing of raw symbols and C names. ++global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe ++ ++# Transform the output of nm in a proper C declaration ++global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl ++ ++# Transform the output of nm in a C name address pair ++global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address ++ ++# This is the shared library runtime path variable. ++runpath_var=$runpath_var ++ ++# This is the shared library path variable. ++shlibpath_var=$shlibpath_var ++ ++# Is shlibpath searched before the hard-coded library search path? ++shlibpath_overrides_runpath=$shlibpath_overrides_runpath ++ ++# How to hardcode a shared library path into an executable. ++hardcode_action=$hardcode_action ++ ++# Whether we should hardcode library paths into libraries. ++hardcode_into_libs=$hardcode_into_libs ++ ++# Flag to hardcode \$libdir into a binary during linking. ++# This must work even if \$libdir does not exist. ++hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec ++ ++# If ld is used when linking, flag to hardcode \$libdir into ++# a binary during linking. This must work even if \$libdir does ++# not exist. ++hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld ++ ++# Whether we need a single -rpath flag with a separated argument. ++hardcode_libdir_separator=$lt_hardcode_libdir_separator ++ ++# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the ++# resulting binary. ++hardcode_direct=$hardcode_direct ++ ++# Set to yes if using the -LDIR flag during linking hardcodes DIR into the ++# resulting binary. ++hardcode_minus_L=$hardcode_minus_L ++ ++# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into ++# the resulting binary. ++hardcode_shlibpath_var=$hardcode_shlibpath_var ++ ++# Set to yes if building a shared library automatically hardcodes DIR into the library ++# and all subsequent libraries and executables linked against it. ++hardcode_automatic=$hardcode_automatic ++ ++# Variables whose values should be saved in libtool wrapper scripts and ++# restored at relink time. ++variables_saved_for_relink="$variables_saved_for_relink" ++ ++# Whether libtool must link a program against all its dependency libraries. ++link_all_deplibs=$link_all_deplibs ++ ++# Compile-time system search path for libraries ++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec ++ ++# Run-time system search path for libraries ++sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec ++ ++# Fix the shell variable \$srcfile for the compiler. ++fix_srcfile_path="$fix_srcfile_path" ++ ++# Set to yes if exported symbols are required. ++always_export_symbols=$always_export_symbols ++ ++# The commands to list exported symbols. ++export_symbols_cmds=$lt_export_symbols_cmds ++ ++# The commands to extract the exported symbol list from a shared archive. ++extract_expsyms_cmds=$lt_extract_expsyms_cmds ++ ++# Symbols that should not be listed in the preloaded symbols. ++exclude_expsyms=$lt_exclude_expsyms ++ ++# Symbols that must always be exported. ++include_expsyms=$lt_include_expsyms ++ ++# ### END LIBTOOL CONFIG ++ ++__EOF__ ++ ++ ++ case $host_os in ++ aix3*) ++ cat <<\EOF >> "$cfgfile" ++ ++# AIX sometimes has problems with the GCC collect2 program. For some ++# reason, if we set the COLLECT_NAMES environment variable, the problems ++# vanish in a puff of smoke. ++if test "X${COLLECT_NAMES+set}" != Xset; then ++ COLLECT_NAMES= ++ export COLLECT_NAMES ++fi ++EOF ++ ;; ++ esac ++ ++ # We use sed instead of cat because bash on DJGPP gets confused if ++ # if finds mixed CR/LF and LF-only lines. Since sed operates in ++ # text mode, it properly converts lines to CR/LF. This bash problem ++ # is reportedly fixed, but why not run on old versions too? ++ sed '$q' "$ltmain" >> "$cfgfile" || (rm -f "$cfgfile"; exit 1) ++ ++ mv -f "$cfgfile" "$ofile" || \ ++ (rm -f "$ofile" && cp "$cfgfile" "$ofile" && rm -f "$cfgfile") ++ chmod +x "$ofile" ++ ++else ++ # If there is no Makefile yet, we rely on a make rule to execute ++ # `config.status --recheck' to rerun these tests and create the ++ # libtool script then. ++ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` ++ if test -f "$ltmain_in"; then ++ test -f Makefile && make "$ltmain" ++ fi ++fi ++ ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++CC="$lt_save_CC" ++ ++ ++# Check whether --with-tags was given. ++if test "${with_tags+set}" = set; then ++ withval=$with_tags; tagnames="$withval" ++fi ++ ++ ++if test -f "$ltmain" && test -n "$tagnames"; then ++ if test ! -f "${ofile}"; then ++ { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not exist" >&5 ++echo "$as_me: WARNING: output file \`$ofile' does not exist" >&2;} ++ fi ++ ++ if test -z "$LTCC"; then ++ eval "`$SHELL ${ofile} --config | grep '^LTCC='`" ++ if test -z "$LTCC"; then ++ { echo "$as_me:$LINENO: WARNING: output file \`$ofile' does not look like a libtool script" >&5 ++echo "$as_me: WARNING: output file \`$ofile' does not look like a libtool script" >&2;} ++ else ++ { echo "$as_me:$LINENO: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&5 ++echo "$as_me: WARNING: using \`LTCC=$LTCC', extracted from \`$ofile'" >&2;} ++ fi ++ fi ++ if test -z "$LTCFLAGS"; then ++ eval "`$SHELL ${ofile} --config | grep '^LTCFLAGS='`" ++ fi ++ ++ # Extract list of available tagged configurations in $ofile. ++ # Note that this assumes the entire list is on one line. ++ available_tags=`grep "^available_tags=" "${ofile}" | $SED -e 's/available_tags=\(.*$\)/\1/' -e 's/\"//g'` ++ ++ lt_save_ifs="$IFS"; IFS="${IFS}$PATH_SEPARATOR," ++ for tagname in $tagnames; do ++ IFS="$lt_save_ifs" ++ # Check whether tagname contains only valid characters ++ case `$echo "X$tagname" | $Xsed -e 's:[-_ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz1234567890,/]::g'` in ++ "") ;; ++ *) { { echo "$as_me:$LINENO: error: invalid tag name: $tagname" >&5 ++echo "$as_me: error: invalid tag name: $tagname" >&2;} ++ { (exit 1); exit 1; }; } ++ ;; ++ esac ++ ++ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "${ofile}" > /dev/null ++ then ++ { { echo "$as_me:$LINENO: error: tag name \"$tagname\" already exists" >&5 ++echo "$as_me: error: tag name \"$tagname\" already exists" >&2;} ++ { (exit 1); exit 1; }; } ++ fi ++ ++ # Update the list of available tags. ++ if test -n "$tagname"; then ++ echo appending configuration tag \"$tagname\" to $ofile ++ ++ case $tagname in ++ CXX) ++ if test -n "$CXX" && ( test "X$CXX" != "Xno" && ++ ( (test "X$CXX" = "Xg++" && `g++ -v >/dev/null 2>&1` ) || ++ (test "X$CXX" != "Xg++"))) ; then ++ ac_ext=cpp ++ac_cpp='$CXXCPP $CPPFLAGS' ++ac_compile='$CXX -c $CXXFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CXX -o conftest$ac_exeext $CXXFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_cxx_compiler_gnu ++ ++ ++ ++ ++archive_cmds_need_lc_CXX=no ++allow_undefined_flag_CXX= ++always_export_symbols_CXX=no ++archive_expsym_cmds_CXX= ++export_dynamic_flag_spec_CXX= ++hardcode_direct_CXX=no ++hardcode_libdir_flag_spec_CXX= ++hardcode_libdir_flag_spec_ld_CXX= ++hardcode_libdir_separator_CXX= ++hardcode_minus_L_CXX=no ++hardcode_shlibpath_var_CXX=unsupported ++hardcode_automatic_CXX=no ++module_cmds_CXX= ++module_expsym_cmds_CXX= ++link_all_deplibs_CXX=unknown ++old_archive_cmds_CXX=$old_archive_cmds ++no_undefined_flag_CXX= ++whole_archive_flag_spec_CXX= ++enable_shared_with_static_runtimes_CXX=no ++ ++# Dependencies to place before and after the object being linked: ++predep_objects_CXX= ++postdep_objects_CXX= ++predeps_CXX= ++postdeps_CXX= ++compiler_lib_search_path_CXX= ++ ++# Source file extension for C++ test sources. ++ac_ext=cpp ++ ++# Object file extension for compiled C++ test sources. ++objext=o ++objext_CXX=$objext ++ ++# Code to be used in simple compile tests ++lt_simple_compile_test_code="int some_variable = 0;\n" ++ ++# Code to be used in simple link tests ++lt_simple_link_test_code='int main(int, char *[]) { return(0); }\n' ++ ++# ltmain only uses $CC for tagged configurations so make sure $CC is set. ++ ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} ++ ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++ ++# Allow CC to be a program name with arguments. ++compiler=$CC ++ ++ ++# save warnings/boilerplate of simple test code ++ac_outfile=conftest.$ac_objext ++printf "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$rm conftest* ++ ++ac_outfile=conftest.$ac_objext ++printf "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$rm conftest* ++ ++ ++# Allow CC to be a program name with arguments. ++lt_save_CC=$CC ++lt_save_LD=$LD ++lt_save_GCC=$GCC ++GCC=$GXX ++lt_save_with_gnu_ld=$with_gnu_ld ++lt_save_path_LD=$lt_cv_path_LD ++if test -n "${lt_cv_prog_gnu_ldcxx+set}"; then ++ lt_cv_prog_gnu_ld=$lt_cv_prog_gnu_ldcxx ++else ++ $as_unset lt_cv_prog_gnu_ld ++fi ++if test -n "${lt_cv_path_LDCXX+set}"; then ++ lt_cv_path_LD=$lt_cv_path_LDCXX ++else ++ $as_unset lt_cv_path_LD ++fi ++test -z "${LDCXX+set}" || LD=$LDCXX ++CC=${CXX-"c++"} ++compiler=$CC ++compiler_CXX=$CC ++for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++ ++ ++# We don't want -fno-exception wen compiling C++ code, so set the ++# no_builtin_flag separately ++if test "$GXX" = yes; then ++ lt_prog_compiler_no_builtin_flag_CXX=' -fno-builtin' ++else ++ lt_prog_compiler_no_builtin_flag_CXX= ++fi ++ ++if test "$GXX" = yes; then ++ # Set up default GNU C++ configuration ++ ++ ++# Check whether --with-gnu-ld was given. ++if test "${with_gnu_ld+set}" = set; then ++ withval=$with_gnu_ld; test "$withval" = no || with_gnu_ld=yes ++else ++ with_gnu_ld=no ++fi ++ ++ac_prog=ld ++if test "$GCC" = yes; then ++ # Check if gcc -print-prog-name=ld gives a path. ++ { echo "$as_me:$LINENO: checking for ld used by $CC" >&5 ++echo $ECHO_N "checking for ld used by $CC... $ECHO_C" >&6; } ++ case $host in ++ *-*-mingw*) ++ # gcc leaves a trailing carriage return which upsets mingw ++ ac_prog=`($CC -print-prog-name=ld) 2>&5 | tr -d '\015'` ;; ++ *) ++ ac_prog=`($CC -print-prog-name=ld) 2>&5` ;; ++ esac ++ case $ac_prog in ++ # Accept absolute paths. ++ [\\/]* | ?:[\\/]*) ++ re_direlt='/[^/][^/]*/\.\./' ++ # Canonicalize the pathname of ld ++ ac_prog=`echo $ac_prog| $SED 's%\\\\%/%g'` ++ while echo $ac_prog | grep "$re_direlt" > /dev/null 2>&1; do ++ ac_prog=`echo $ac_prog| $SED "s%$re_direlt%/%"` ++ done ++ test -z "$LD" && LD="$ac_prog" ++ ;; ++ "") ++ # If it fails, then pretend we aren't using GCC. ++ ac_prog=ld ++ ;; ++ *) ++ # If it is relative, then search for the first ld in PATH. ++ with_gnu_ld=unknown ++ ;; ++ esac ++elif test "$with_gnu_ld" = yes; then ++ { echo "$as_me:$LINENO: checking for GNU ld" >&5 ++echo $ECHO_N "checking for GNU ld... $ECHO_C" >&6; } ++else ++ { echo "$as_me:$LINENO: checking for non-GNU ld" >&5 ++echo $ECHO_N "checking for non-GNU ld... $ECHO_C" >&6; } ++fi ++if test "${lt_cv_path_LD+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ if test -z "$LD"; then ++ lt_save_ifs="$IFS"; IFS=$PATH_SEPARATOR ++ for ac_dir in $PATH; do ++ IFS="$lt_save_ifs" ++ test -z "$ac_dir" && ac_dir=. ++ if test -f "$ac_dir/$ac_prog" || test -f "$ac_dir/$ac_prog$ac_exeext"; then ++ lt_cv_path_LD="$ac_dir/$ac_prog" ++ # Check to see if the program is GNU ld. I'd rather use --version, ++ # but apparently some variants of GNU ld only accept -v. ++ # Break only if it was the GNU/non-GNU ld that we prefer. ++ case `"$lt_cv_path_LD" -v 2>&1 &5 ++echo "${ECHO_T}$LD" >&6; } ++else ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } ++fi ++test -z "$LD" && { { echo "$as_me:$LINENO: error: no acceptable ld found in \$PATH" >&5 ++echo "$as_me: error: no acceptable ld found in \$PATH" >&2;} ++ { (exit 1); exit 1; }; } ++{ echo "$as_me:$LINENO: checking if the linker ($LD) is GNU ld" >&5 ++echo $ECHO_N "checking if the linker ($LD) is GNU ld... $ECHO_C" >&6; } ++if test "${lt_cv_prog_gnu_ld+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ # I'd rather use --version here, but apparently some GNU lds only accept -v. ++case `$LD -v 2>&1 &5 ++echo "${ECHO_T}$lt_cv_prog_gnu_ld" >&6; } ++with_gnu_ld=$lt_cv_prog_gnu_ld ++ ++ ++ ++ # Check if GNU C++ uses GNU ld as the underlying linker, since the ++ # archiving commands below assume that GNU ld is being used. ++ if test "$with_gnu_ld" = yes; then ++ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ++ hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' ++ export_dynamic_flag_spec_CXX='${wl}--export-dynamic' ++ ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ # XXX I think wlarc can be eliminated in ltcf-cxx, but I need to ++ # investigate it a little bit more. (MM) ++ wlarc='${wl}' ++ ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if eval "`$CC -print-prog-name=ld` --help 2>&1" | \ ++ grep 'no-whole-archive' > /dev/null; then ++ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ whole_archive_flag_spec_CXX= ++ fi ++ else ++ with_gnu_ld=no ++ wlarc= ++ ++ # A generic and very simple default shared library creation ++ # command for GNU C++ for the case where it uses the native ++ # linker, instead of GNU ld. If possible, this setting should ++ # overridden to take advantage of the native linker features on ++ # the platform it is being used on. ++ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' ++ fi ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' ++ ++else ++ GXX=no ++ with_gnu_ld=no ++ wlarc= ++fi ++ ++# PORTME: fill in a description of your system's C++ link characteristics ++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } ++ld_shlibs_CXX=yes ++case $host_os in ++ aix3*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ aix4* | aix5*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ aix_use_runtimelinking=no ++ ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[23]|aix4.[23].*|aix5*) ++ for ld_flag in $LDFLAGS; do ++ case $ld_flag in ++ *-brtl*) ++ aix_use_runtimelinking=yes ++ break ++ ;; ++ esac ++ done ++ ;; ++ esac ++ ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' ++ fi ++ ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++ ++ archive_cmds_CXX='' ++ hardcode_direct_CXX=yes ++ hardcode_libdir_separator_CXX=':' ++ link_all_deplibs_CXX=yes ++ ++ if test "$GXX" = yes; then ++ case $host_os in aix4.[012]|aix4.[012].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && \ ++ strings "$collect2name" | grep resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ hardcode_direct_CXX=yes ++ else ++ # We have old collect2 ++ hardcode_direct_CXX=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ hardcode_minus_L_CXX=yes ++ hardcode_libdir_flag_spec_CXX='-L$libdir' ++ hardcode_libdir_separator_CXX= ++ fi ++ ;; ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi ++ fi ++ fi ++ ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to export. ++ always_export_symbols_CXX=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ allow_undefined_flag_CXX='-berok' ++ # Determine the default libpath from the value encoded in an empty executable. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'`; fi ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ ++ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" ++ ++ archive_expsym_cmds_CXX="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ hardcode_libdir_flag_spec_CXX='${wl}-R $libdir:/usr/lib:/lib' ++ allow_undefined_flag_CXX="-z nodefs" ++ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an empty executable. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_cxx_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'`; fi ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ ++ hardcode_libdir_flag_spec_CXX='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ no_undefined_flag_CXX=' ${wl}-bernotok' ++ allow_undefined_flag_CXX=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ whole_archive_flag_spec_CXX='$convenience' ++ archive_cmds_need_lc_CXX=yes ++ # This is similar to how AIX traditionally builds its shared libraries. ++ archive_expsym_cmds_CXX="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi ++ fi ++ ;; ++ ++ beos*) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ allow_undefined_flag_CXX=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ archive_cmds_CXX='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ ld_shlibs_CXX=no ++ fi ++ ;; ++ ++ chorus*) ++ case $cc_basename in ++ *) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ esac ++ ;; ++ ++ cygwin* | mingw* | pw32*) ++ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, CXX) is actually meaningless, ++ # as there is no search path for DLLs. ++ hardcode_libdir_flag_spec_CXX='-L$libdir' ++ allow_undefined_flag_CXX=unsupported ++ always_export_symbols_CXX=no ++ enable_shared_with_static_runtimes_CXX=yes ++ ++ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then ++ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ archive_expsym_cmds_CXX='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared -nostdlib $output_objdir/$soname.def $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ ld_shlibs_CXX=no ++ fi ++ ;; ++ darwin* | rhapsody*) ++ case $host_os in ++ rhapsody* | darwin1.[012]) ++ allow_undefined_flag_CXX='${wl}-undefined ${wl}suppress' ++ ;; ++ *) # Darwin 1.3 on ++ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then ++ allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ else ++ case ${MACOSX_DEPLOYMENT_TARGET} in ++ 10.[012]) ++ allow_undefined_flag_CXX='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ ;; ++ 10.*) ++ allow_undefined_flag_CXX='${wl}-undefined ${wl}dynamic_lookup' ++ ;; ++ esac ++ fi ++ ;; ++ esac ++ archive_cmds_need_lc_CXX=no ++ hardcode_direct_CXX=no ++ hardcode_automatic_CXX=yes ++ hardcode_shlibpath_var_CXX=unsupported ++ whole_archive_flag_spec_CXX='' ++ link_all_deplibs_CXX=yes ++ ++ if test "$GXX" = yes ; then ++ lt_int_apple_cc_single_mod=no ++ output_verbose_link_cmd='echo' ++ if $CC -dumpspecs 2>&1 | $EGREP 'single_module' >/dev/null ; then ++ lt_int_apple_cc_single_mod=yes ++ fi ++ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then ++ archive_cmds_CXX='$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' ++ else ++ archive_cmds_CXX='$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring' ++ fi ++ module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ if test "X$lt_int_apple_cc_single_mod" = Xyes ; then ++ archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib -single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ else ++ archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -r -keep_private_externs -nostdlib -o ${lib}-master.o $libobjs~$CC -dynamiclib $allow_undefined_flag -o $lib ${lib}-master.o $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ fi ++ module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ else ++ case $cc_basename in ++ xlc*) ++ output_verbose_link_cmd='echo' ++ archive_cmds_CXX='$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' ++ module_cmds_CXX='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ archive_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj ${wl}-single_module $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ module_expsym_cmds_CXX='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ ;; ++ *) ++ ld_shlibs_CXX=no ++ ;; ++ esac ++ fi ++ ;; ++ ++ dgux*) ++ case $cc_basename in ++ ec++*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ ghcx*) ++ # Green Hills C++ Compiler ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ esac ++ ;; ++ freebsd[12]*) ++ # C++ shared libraries reported to be fairly broken before switch to ELF ++ ld_shlibs_CXX=no ++ ;; ++ freebsd-elf*) ++ archive_cmds_need_lc_CXX=no ++ ;; ++ freebsd* | dragonfly*) ++ # FreeBSD 3 and later use GNU C++ and GNU ld with standard ELF ++ # conventions ++ ld_shlibs_CXX=yes ++ ;; ++ gnu*) ++ ;; ++ hpux9*) ++ hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator_CXX=: ++ export_dynamic_flag_spec_CXX='${wl}-E' ++ hardcode_direct_CXX=yes ++ hardcode_minus_L_CXX=yes # Not in the search PATH, ++ # but as the default ++ # location of the library. ++ ++ case $cc_basename in ++ CC*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ aCC*) ++ archive_cmds_CXX='$rm $output_objdir/$soname~$CC -b ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "[-]L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ archive_cmds_CXX='$rm $output_objdir/$soname~$CC -shared -nostdlib -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ fi ++ ;; ++ esac ++ ;; ++ hpux10*|hpux11*) ++ if test $with_gnu_ld = no; then ++ hardcode_libdir_flag_spec_CXX='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator_CXX=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) ++ hardcode_libdir_flag_spec_ld_CXX='+b $libdir' ++ ;; ++ *) ++ export_dynamic_flag_spec_CXX='${wl}-E' ++ ;; ++ esac ++ fi ++ case $host_cpu in ++ hppa*64*|ia64*) ++ hardcode_direct_CXX=no ++ hardcode_shlibpath_var_CXX=no ++ ;; ++ *) ++ hardcode_direct_CXX=yes ++ hardcode_minus_L_CXX=yes # Not in the search PATH, ++ # but as the default ++ # location of the library. ++ ;; ++ esac ++ ++ case $cc_basename in ++ CC*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ aCC*) ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ *) ++ archive_cmds_CXX='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ esac ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`($CC -b $CFLAGS -v conftest.$objext 2>&1) | grep "\-L"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ if test $with_gnu_ld = no; then ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ *) ++ archive_cmds_CXX='$CC -shared -nostdlib -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ ;; ++ esac ++ fi ++ else ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ fi ++ ;; ++ esac ++ ;; ++ interix3*) ++ hardcode_direct_CXX=no ++ hardcode_shlibpath_var_CXX=no ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec_CXX='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ archive_cmds_CXX='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ archive_expsym_cmds_CXX='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; ++ irix5* | irix6*) ++ case $cc_basename in ++ CC*) ++ # SGI C++ ++ archive_cmds_CXX='$CC -shared -all -multigot $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -ar", where "CC" is the IRIX C++ compiler. This is ++ # necessary to make sure instantiated templates are included ++ # in the archive. ++ old_archive_cmds_CXX='$CC -ar -WR,-u -o $oldlib $oldobjs' ++ ;; ++ *) ++ if test "$GXX" = yes; then ++ if test "$with_gnu_ld" = no; then ++ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ archive_cmds_CXX='$CC -shared -nostdlib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` -o $lib' ++ fi ++ fi ++ link_all_deplibs_CXX=yes ++ ;; ++ esac ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator_CXX=: ++ ;; ++ linux* | k*bsd*-gnu) ++ case $cc_basename in ++ KCC*) ++ # Kuck and Associates, Inc. (KAI) C++ Compiler ++ ++ # KCC will only create a shared library if the output file ++ # ends with ".so" (or ".sl" for HP-UX), so rename the library ++ # to its proper name (with version) after linking. ++ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' ++ archive_expsym_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib ${wl}-retain-symbols-file,$export_symbols; mv \$templib $lib' ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC $CFLAGS -v conftest.$objext -o libconftest$shared_ext 2>&1 | grep "ld"`; rm -f libconftest$shared_ext; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ ++ hardcode_libdir_flag_spec_CXX='${wl}--rpath,$libdir' ++ export_dynamic_flag_spec_CXX='${wl}--export-dynamic' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -Bstatic", where "CC" is the KAI C++ compiler. ++ old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ++ ;; ++ icpc*) ++ # Intel C++ ++ with_gnu_ld=yes ++ # version 8.0 and above of icpc choke on multiply defined symbols ++ # if we add $predep_objects and $postdep_objects, however 7.1 and ++ # earlier do not add the objects themselves. ++ case `$CC -V 2>&1` in ++ *"Version 7."*) ++ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ;; ++ *) # Version 8.0 or newer ++ tmp_idyn= ++ case $host_cpu in ++ ia64*) tmp_idyn=' -i_dynamic';; ++ esac ++ archive_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds_CXX='$CC -shared'"$tmp_idyn"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ ;; ++ esac ++ archive_cmds_need_lc_CXX=no ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec_CXX='${wl}--export-dynamic' ++ whole_archive_flag_spec_CXX='${wl}--whole-archive$convenience ${wl}--no-whole-archive' ++ ;; ++ pgCC*) ++ # Portland Group C++ compiler ++ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname -o $lib' ++ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname ${wl}-retain-symbols-file ${wl}$export_symbols -o $lib' ++ ++ hardcode_libdir_flag_spec_CXX='${wl}--rpath ${wl}$libdir' ++ export_dynamic_flag_spec_CXX='${wl}--export-dynamic' ++ whole_archive_flag_spec_CXX='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ ;; ++ cxx*) ++ # Compaq C++ ++ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $wl$soname -o $lib ${wl}-retain-symbols-file $wl$export_symbols' ++ ++ runpath_var=LD_RUN_PATH ++ hardcode_libdir_flag_spec_CXX='-rpath $libdir' ++ hardcode_libdir_separator_CXX=: ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld .*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ ;; ++ esac ++ ;; ++ lynxos*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ m88k*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ mvs*) ++ case $cc_basename in ++ cxx*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ esac ++ ;; ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ archive_cmds_CXX='$LD -Bshareable -o $lib $predep_objects $libobjs $deplibs $postdep_objects $linker_flags' ++ wlarc= ++ hardcode_libdir_flag_spec_CXX='-R$libdir' ++ hardcode_direct_CXX=yes ++ hardcode_shlibpath_var_CXX=no ++ fi ++ # Workaround some broken pre-1.5 toolchains ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep conftest.$objext | $SED -e "s:-lgcc -lc -lgcc::"' ++ ;; ++ openbsd2*) ++ # C++ shared libraries are fairly broken ++ ld_shlibs_CXX=no ++ ;; ++ openbsd*) ++ hardcode_direct_CXX=yes ++ hardcode_shlibpath_var_CXX=no ++ archive_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -o $lib' ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ archive_expsym_cmds_CXX='$CC -shared $pic_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-retain-symbols-file,$export_symbols -o $lib' ++ export_dynamic_flag_spec_CXX='${wl}-E' ++ whole_archive_flag_spec_CXX="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ fi ++ output_verbose_link_cmd='echo' ++ ;; ++ osf3*) ++ case $cc_basename in ++ KCC*) ++ # Kuck and Associates, Inc. (KAI) C++ Compiler ++ ++ # KCC will only create a shared library if the output file ++ # ends with ".so" (or ".sl" for HP-UX), so rename the library ++ # to its proper name (with version) after linking. ++ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' ++ ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' ++ hardcode_libdir_separator_CXX=: ++ ++ # Archives containing C++ object files must be created using ++ # "CC -Bstatic", where "CC" is the KAI C++ compiler. ++ old_archive_cmds_CXX='$CC -Bstatic -o $oldlib $oldobjs' ++ ++ ;; ++ RCC*) ++ # Rational C++ 2.4.1 ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ cxx*) ++ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname $soname `test -n "$verstring" && echo ${wl}-set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator_CXX=: ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ ;; ++ *) ++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then ++ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator_CXX=: ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' ++ ++ else ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ fi ++ ;; ++ esac ++ ;; ++ osf4* | osf5*) ++ case $cc_basename in ++ KCC*) ++ # Kuck and Associates, Inc. (KAI) C++ Compiler ++ ++ # KCC will only create a shared library if the output file ++ # ends with ".so" (or ".sl" for HP-UX), so rename the library ++ # to its proper name (with version) after linking. ++ archive_cmds_CXX='tempext=`echo $shared_ext | $SED -e '\''s/\([^()0-9A-Za-z{}]\)/\\\\\1/g'\''`; templib=`echo $lib | $SED -e "s/\${tempext}\..*/.so/"`; $CC $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags --soname $soname -o \$templib; mv \$templib $lib' ++ ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath,$libdir' ++ hardcode_libdir_separator_CXX=: ++ ++ # Archives containing C++ object files must be created using ++ # the KAI C++ compiler. ++ old_archive_cmds_CXX='$CC -o $oldlib $oldobjs' ++ ;; ++ RCC*) ++ # Rational C++ 2.4.1 ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ cxx*) ++ allow_undefined_flag_CXX=' -expect_unresolved \*' ++ archive_cmds_CXX='$CC -shared${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ archive_expsym_cmds_CXX='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done~ ++ echo "-hidden">> $lib.exp~ ++ $CC -shared$allow_undefined_flag $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags -msym -soname $soname -Wl,-input -Wl,$lib.exp `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~ ++ $rm $lib.exp' ++ ++ hardcode_libdir_flag_spec_CXX='-rpath $libdir' ++ hardcode_libdir_separator_CXX=: ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ # ++ # There doesn't appear to be a way to prevent this compiler from ++ # explicitly linking system object files so we need to strip them ++ # from the output so that they don't get included in the library ++ # dependencies. ++ output_verbose_link_cmd='templist=`$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "ld" | grep -v "ld:"`; templist=`echo $templist | $SED "s/\(^.*ld.*\)\( .*ld.*$\)/\1/"`; list=""; for z in $templist; do case $z in conftest.$objext) list="$list $z";; *.$objext);; *) list="$list $z";;esac; done; echo $list' ++ ;; ++ *) ++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then ++ allow_undefined_flag_CXX=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds_CXX='$CC -shared -nostdlib ${allow_undefined_flag} $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ ++ hardcode_libdir_flag_spec_CXX='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator_CXX=: ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd='$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep "\-L"' ++ ++ else ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ fi ++ ;; ++ esac ++ ;; ++ psos*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ sunos4*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.x ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ lcc*) ++ # Lucid ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ esac ++ ;; ++ solaris*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.2, 5.x and Centerline C++ ++ archive_cmds_need_lc_CXX=yes ++ no_undefined_flag_CXX=' -zdefs' ++ archive_cmds_CXX='$CC -G${allow_undefined_flag} -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags' ++ archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ ++ $CC -G${allow_undefined_flag} ${wl}-M ${wl}$lib.exp -h$soname -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' ++ ++ hardcode_libdir_flag_spec_CXX='-R$libdir' ++ hardcode_shlibpath_var_CXX=no ++ case $host_os in ++ solaris2.[0-5] | solaris2.[0-5].*) ;; ++ *) ++ # The C++ compiler is used as linker so we must use $wl ++ # flag to pass the commands to the underlying system ++ # linker. We must also pass each convience library through ++ # to the system linker between allextract/defaultextract. ++ # The C++ compiler will combine linker options so we ++ # cannot just pass the convience library names through ++ # without $wl. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ whole_archive_flag_spec_CXX='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ++ ;; ++ esac ++ link_all_deplibs_CXX=yes ++ ++ output_verbose_link_cmd='echo' ++ ++ # Archives containing C++ object files must be created using ++ # "CC -xar", where "CC" is the Sun C++ compiler. This is ++ # necessary to make sure instantiated templates are included ++ # in the archive. ++ old_archive_cmds_CXX='$CC -xar -o $oldlib $oldobjs' ++ ;; ++ gcx*) ++ # Green Hills C++ Compiler ++ archive_cmds_CXX='$CC -shared $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ ++ # The C++ compiler must be used to create the archive. ++ old_archive_cmds_CXX='$CC $LDFLAGS -archive -o $oldlib $oldobjs' ++ ;; ++ *) ++ # GNU C++ compiler with Solaris linker ++ if test "$GXX" = yes && test "$with_gnu_ld" = no; then ++ no_undefined_flag_CXX=' ${wl}-z ${wl}defs' ++ if $CC --version | grep -v '^2\.7' > /dev/null; then ++ archive_cmds_CXX='$CC -shared -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ ++ $CC -shared -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd="$CC -shared $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" ++ else ++ # g++ 2.7 appears to require `-G' NOT `-shared' on this ++ # platform. ++ archive_cmds_CXX='$CC -G -nostdlib $LDFLAGS $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags ${wl}-h $wl$soname -o $lib' ++ archive_expsym_cmds_CXX='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ ++ $CC -G -nostdlib ${wl}-M $wl$lib.exp -o $lib $predep_objects $libobjs $deplibs $postdep_objects $compiler_flags~$rm $lib.exp' ++ ++ # Commands to make compiler produce verbose output that lists ++ # what "hidden" libraries, object files and flags are used when ++ # linking a shared library. ++ output_verbose_link_cmd="$CC -G $CFLAGS -v conftest.$objext 2>&1 | grep \"\-L\"" ++ fi ++ ++ hardcode_libdir_flag_spec_CXX='${wl}-R $wl$libdir' ++ fi ++ ;; ++ esac ++ ;; ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7* | sco3.2v5.0.[024]*) ++ no_undefined_flag_CXX='${wl}-z,text' ++ archive_cmds_need_lc_CXX=no ++ hardcode_shlibpath_var_CXX=no ++ runpath_var='LD_RUN_PATH' ++ ++ case $cc_basename in ++ CC*) ++ archive_cmds_CXX='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds_CXX='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ ;; ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ # For security reasons, it is highly recommended that you always ++ # use absolute paths for naming shared libraries, and exclude the ++ # DT_RUNPATH tag from executables and libraries. But doing so ++ # requires that you compile everything twice, which is a pain. ++ # So that behaviour is only enabled if SCOABSPATH is set to a ++ # non-empty value in the environment. Most likely only useful for ++ # creating official distributions of packages. ++ # This is a hack until libtool officially supports absolute path ++ # names for shared libraries. ++ no_undefined_flag_CXX='${wl}-z,text' ++ allow_undefined_flag_CXX='${wl}-z,nodefs' ++ archive_cmds_need_lc_CXX=no ++ hardcode_shlibpath_var_CXX=no ++ hardcode_libdir_flag_spec_CXX='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' ++ hardcode_libdir_separator_CXX=':' ++ link_all_deplibs_CXX=yes ++ export_dynamic_flag_spec_CXX='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' ++ ++ case $cc_basename in ++ CC*) ++ archive_cmds_CXX='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_CXX='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds_CXX='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_CXX='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ ;; ++ tandem*) ++ case $cc_basename in ++ NCC*) ++ # NonStop-UX NCC 3.20 ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ esac ++ ;; ++ vxworks*) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++ *) ++ # FIXME: insert proper C++ library support ++ ld_shlibs_CXX=no ++ ;; ++esac ++{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 ++echo "${ECHO_T}$ld_shlibs_CXX" >&6; } ++test "$ld_shlibs_CXX" = no && can_build_shared=no ++ ++GCC_CXX="$GXX" ++LD_CXX="$LD" ++ ++ ++cat > conftest.$ac_ext <&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); }; then ++ # Parse the compiler output and extract the necessary ++ # objects, libraries and library flags. ++ ++ # Sentinel used to keep track of whether or not we are before ++ # the conftest object file. ++ pre_test_object_deps_done=no ++ ++ # The `*' in the case matches for architectures that use `case' in ++ # $output_verbose_cmd can trigger glob expansion during the loop ++ # eval without this substitution. ++ output_verbose_link_cmd=`$echo "X$output_verbose_link_cmd" | $Xsed -e "$no_glob_subst"` ++ ++ for p in `eval $output_verbose_link_cmd`; do ++ case $p in ++ ++ -L* | -R* | -l*) ++ # Some compilers place space between "-{L,R}" and the path. ++ # Remove the space. ++ if test $p = "-L" \ ++ || test $p = "-R"; then ++ prev=$p ++ continue ++ else ++ prev= ++ fi ++ ++ if test "$pre_test_object_deps_done" = no; then ++ case $p in ++ -L* | -R*) ++ # Internal compiler library paths should come after those ++ # provided the user. The postdeps already come after the ++ # user supplied libs so there is no need to process them. ++ if test -z "$compiler_lib_search_path_CXX"; then ++ compiler_lib_search_path_CXX="${prev}${p}" ++ else ++ compiler_lib_search_path_CXX="${compiler_lib_search_path_CXX} ${prev}${p}" ++ fi ++ ;; ++ # The "-l" case would never come before the object being ++ # linked, so don't bother handling this case. ++ esac ++ else ++ if test -z "$postdeps_CXX"; then ++ postdeps_CXX="${prev}${p}" ++ else ++ postdeps_CXX="${postdeps_CXX} ${prev}${p}" ++ fi ++ fi ++ ;; ++ ++ *.$objext) ++ # This assumes that the test object file only shows up ++ # once in the compiler output. ++ if test "$p" = "conftest.$objext"; then ++ pre_test_object_deps_done=yes ++ continue ++ fi ++ ++ if test "$pre_test_object_deps_done" = no; then ++ if test -z "$predep_objects_CXX"; then ++ predep_objects_CXX="$p" ++ else ++ predep_objects_CXX="$predep_objects_CXX $p" ++ fi ++ else ++ if test -z "$postdep_objects_CXX"; then ++ postdep_objects_CXX="$p" ++ else ++ postdep_objects_CXX="$postdep_objects_CXX $p" ++ fi ++ fi ++ ;; ++ ++ *) ;; # Ignore the rest. ++ ++ esac ++ done ++ ++ # Clean up. ++ rm -f a.out a.exe ++else ++ echo "libtool.m4: error: problem compiling CXX test program" ++fi ++ ++$rm -f confest.$objext ++ ++# PORTME: override above test on systems where it is broken ++case $host_os in ++interix3*) ++ # Interix 3.5 installs completely hosed .la files for C++, so rather than ++ # hack all around it, let's just trust "g++" to DTRT. ++ predep_objects_CXX= ++ postdep_objects_CXX= ++ postdeps_CXX= ++ ;; ++ ++solaris*) ++ case $cc_basename in ++ CC*) ++ # Adding this requires a known-good setup of shared libraries for ++ # Sun compiler versions before 5.6, else PIC objects from an old ++ # archive will be linked into the output, leading to subtle bugs. ++ postdeps_CXX='-lCstd -lCrun' ++ ;; ++ esac ++ ;; ++esac ++ ++ ++case " $postdeps_CXX " in ++*" -lc "*) archive_cmds_need_lc_CXX=no ;; ++esac ++ ++lt_prog_compiler_wl_CXX= ++lt_prog_compiler_pic_CXX= ++lt_prog_compiler_static_CXX= ++ ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } ++ ++ # C++ specific cases for pic, static, wl, etc. ++ if test "$GXX" = yes; then ++ lt_prog_compiler_wl_CXX='-Wl,' ++ lt_prog_compiler_static_CXX='-static' ++ ++ case $host_os in ++ aix*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static_CXX='-Bstatic' ++ fi ++ ;; ++ amigaos*) ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ lt_prog_compiler_pic_CXX='-m68020 -resident32 -malways-restore-a4' ++ ;; ++ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. ++ ;; ++ mingw* | os2* | pw32*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ lt_prog_compiler_pic_CXX='-DDLL_EXPORT' ++ ;; ++ darwin* | rhapsody*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ lt_prog_compiler_pic_CXX='-fno-common' ++ ;; ++ *djgpp*) ++ # DJGPP does not support shared libraries at all ++ lt_prog_compiler_pic_CXX= ++ ;; ++ interix3*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ lt_prog_compiler_pic_CXX=-Kconform_pic ++ fi ++ ;; ++ hpux*) ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ ;; ++ *) ++ lt_prog_compiler_pic_CXX='-fPIC' ++ ;; ++ esac ++ ;; ++ *) ++ lt_prog_compiler_pic_CXX='-fPIC' ++ ;; ++ esac ++ else ++ case $host_os in ++ aix4* | aix5*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static_CXX='-Bstatic' ++ else ++ lt_prog_compiler_static_CXX='-bnso -bI:/lib/syscalls.exp' ++ fi ++ ;; ++ chorus*) ++ case $cc_basename in ++ cxch68*) ++ # Green Hills C++ Compiler ++ # _LT_AC_TAGVAR(lt_prog_compiler_static, CXX)="--no_auto_instantiation -u __main -u __premain -u _abort -r $COOL_DIR/lib/libOrb.a $MVME_DIR/lib/CC/libC.a $MVME_DIR/lib/classix/libcx.s.a" ++ ;; ++ esac ++ ;; ++ darwin*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ case $cc_basename in ++ xlc*) ++ lt_prog_compiler_pic_CXX='-qnocommon' ++ lt_prog_compiler_wl_CXX='-Wl,' ++ ;; ++ esac ++ ;; ++ dgux*) ++ case $cc_basename in ++ ec++*) ++ lt_prog_compiler_pic_CXX='-KPIC' ++ ;; ++ ghcx*) ++ # Green Hills C++ Compiler ++ lt_prog_compiler_pic_CXX='-pic' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ freebsd* | dragonfly*) ++ # FreeBSD uses GNU C++ ++ ;; ++ hpux9* | hpux10* | hpux11*) ++ case $cc_basename in ++ CC*) ++ lt_prog_compiler_wl_CXX='-Wl,' ++ lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' ++ if test "$host_cpu" != ia64; then ++ lt_prog_compiler_pic_CXX='+Z' ++ fi ++ ;; ++ aCC*) ++ lt_prog_compiler_wl_CXX='-Wl,' ++ lt_prog_compiler_static_CXX='${wl}-a ${wl}archive' ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ lt_prog_compiler_pic_CXX='+Z' ++ ;; ++ esac ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ interix*) ++ # This is c89, which is MS Visual C++ (no shared libs) ++ # Anyone wants to do a port? ++ ;; ++ irix5* | irix6* | nonstopux*) ++ case $cc_basename in ++ CC*) ++ lt_prog_compiler_wl_CXX='-Wl,' ++ lt_prog_compiler_static_CXX='-non_shared' ++ # CC pic flag -KPIC is the default. ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ linux* | k*bsd*-gnu) ++ case $cc_basename in ++ KCC*) ++ # KAI C++ Compiler ++ lt_prog_compiler_wl_CXX='--backend -Wl,' ++ lt_prog_compiler_pic_CXX='-fPIC' ++ ;; ++ icpc* | ecpc*) ++ # Intel C++ ++ lt_prog_compiler_wl_CXX='-Wl,' ++ lt_prog_compiler_pic_CXX='-KPIC' ++ lt_prog_compiler_static_CXX='-static' ++ ;; ++ pgCC*) ++ # Portland Group C++ compiler. ++ lt_prog_compiler_wl_CXX='-Wl,' ++ lt_prog_compiler_pic_CXX='-fpic' ++ lt_prog_compiler_static_CXX='-Bstatic' ++ ;; ++ cxx*) ++ # Compaq C++ ++ # Make sure the PIC flag is empty. It appears that all Alpha ++ # Linux and Compaq Tru64 Unix objects are PIC. ++ lt_prog_compiler_pic_CXX= ++ lt_prog_compiler_static_CXX='-non_shared' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ lynxos*) ++ ;; ++ m88k*) ++ ;; ++ mvs*) ++ case $cc_basename in ++ cxx*) ++ lt_prog_compiler_pic_CXX='-W c,exportall' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ netbsd* | netbsdelf*-gnu) ++ ;; ++ osf3* | osf4* | osf5*) ++ case $cc_basename in ++ KCC*) ++ lt_prog_compiler_wl_CXX='--backend -Wl,' ++ ;; ++ RCC*) ++ # Rational C++ 2.4.1 ++ lt_prog_compiler_pic_CXX='-pic' ++ ;; ++ cxx*) ++ # Digital/Compaq C++ ++ lt_prog_compiler_wl_CXX='-Wl,' ++ # Make sure the PIC flag is empty. It appears that all Alpha ++ # Linux and Compaq Tru64 Unix objects are PIC. ++ lt_prog_compiler_pic_CXX= ++ lt_prog_compiler_static_CXX='-non_shared' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ psos*) ++ ;; ++ solaris*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.2, 5.x and Centerline C++ ++ lt_prog_compiler_pic_CXX='-KPIC' ++ lt_prog_compiler_static_CXX='-Bstatic' ++ lt_prog_compiler_wl_CXX='-Qoption ld ' ++ ;; ++ gcx*) ++ # Green Hills C++ Compiler ++ lt_prog_compiler_pic_CXX='-PIC' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ sunos4*) ++ case $cc_basename in ++ CC*) ++ # Sun C++ 4.x ++ lt_prog_compiler_pic_CXX='-pic' ++ lt_prog_compiler_static_CXX='-Bstatic' ++ ;; ++ lcc*) ++ # Lucid ++ lt_prog_compiler_pic_CXX='-pic' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ tandem*) ++ case $cc_basename in ++ NCC*) ++ # NonStop-UX NCC 3.20 ++ lt_prog_compiler_pic_CXX='-KPIC' ++ ;; ++ *) ++ ;; ++ esac ++ ;; ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ case $cc_basename in ++ CC*) ++ lt_prog_compiler_wl_CXX='-Wl,' ++ lt_prog_compiler_pic_CXX='-KPIC' ++ lt_prog_compiler_static_CXX='-Bstatic' ++ ;; ++ esac ++ ;; ++ vxworks*) ++ ;; ++ *) ++ lt_prog_compiler_can_build_shared_CXX=no ++ ;; ++ esac ++ fi ++ ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_CXX" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_CXX" >&6; } ++ ++# ++# Check to make sure the PIC flag actually works. ++# ++if test -n "$lt_prog_compiler_pic_CXX"; then ++ ++{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_CXX works... $ECHO_C" >&6; } ++if test "${lt_prog_compiler_pic_works_CXX+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_prog_compiler_pic_works_CXX=no ++ ac_outfile=conftest.$ac_objext ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="$lt_prog_compiler_pic_CXX -DPIC" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:12517: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&5 ++ echo "$as_me:12521: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_prog_compiler_pic_works_CXX=yes ++ fi ++ fi ++ $rm conftest* ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_CXX" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_works_CXX" >&6; } ++ ++if test x"$lt_prog_compiler_pic_works_CXX" = xyes; then ++ case $lt_prog_compiler_pic_CXX in ++ "" | " "*) ;; ++ *) lt_prog_compiler_pic_CXX=" $lt_prog_compiler_pic_CXX" ;; ++ esac ++else ++ lt_prog_compiler_pic_CXX= ++ lt_prog_compiler_can_build_shared_CXX=no ++fi ++ ++fi ++case $host_os in ++ # For platforms which do not support PIC, -DPIC is meaningless: ++ *djgpp*) ++ lt_prog_compiler_pic_CXX= ++ ;; ++ *) ++ lt_prog_compiler_pic_CXX="$lt_prog_compiler_pic_CXX -DPIC" ++ ;; ++esac ++ ++# ++# Check to make sure the static flag actually works. ++# ++wl=$lt_prog_compiler_wl_CXX eval lt_tmp_static_flag=\"$lt_prog_compiler_static_CXX\" ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } ++if test "${lt_prog_compiler_static_works_CXX+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_prog_compiler_static_works_CXX=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $lt_tmp_static_flag" ++ printf "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&5 ++ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ lt_prog_compiler_static_works_CXX=yes ++ fi ++ else ++ lt_prog_compiler_static_works_CXX=yes ++ fi ++ fi ++ $rm conftest* ++ LDFLAGS="$save_LDFLAGS" ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_CXX" >&5 ++echo "${ECHO_T}$lt_prog_compiler_static_works_CXX" >&6; } ++ ++if test x"$lt_prog_compiler_static_works_CXX" = xyes; then ++ : ++else ++ lt_prog_compiler_static_CXX= ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_c_o_CXX+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_c_o_CXX=no ++ $rm -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:12621: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&5 ++ echo "$as_me:12625: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_c_o_CXX=yes ++ fi ++ fi ++ chmod u+w . 2>&5 ++ $rm conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files ++ $rm out/* && rmdir out ++ cd .. ++ rmdir conftest ++ $rm conftest* ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_CXX" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o_CXX" >&6; } ++ ++ ++hard_links="nottested" ++if test "$lt_cv_prog_compiler_c_o_CXX" = no && test "$need_locks" != no; then ++ # do not overwrite the value of need_locks provided by the user ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } ++ hard_links=yes ++ $rm conftest* ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ touch conftest.a ++ ln conftest.a conftest.b 2>&5 || hard_links=no ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ { echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6; } ++ if test "$hard_links" = no; then ++ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 ++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} ++ need_locks=warn ++ fi ++else ++ need_locks=no ++fi ++ ++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } ++ ++ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ case $host_os in ++ aix4* | aix5*) ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then ++ export_symbols_cmds_CXX='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' ++ else ++ export_symbols_cmds_CXX='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' ++ fi ++ ;; ++ pw32*) ++ export_symbols_cmds_CXX="$ltdll_cmds" ++ ;; ++ cygwin* | mingw*) ++ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/;/^.* __nm__/s/^.* __nm__\([^ ]*\) [^ ]*/\1 DATA/;/^I /d;/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' ++ ;; ++ linux* | k*bsd*-gnu) ++ link_all_deplibs_CXX=no ++ ;; ++ *) ++ export_symbols_cmds_CXX='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ ;; ++ esac ++ ++{ echo "$as_me:$LINENO: result: $ld_shlibs_CXX" >&5 ++echo "${ECHO_T}$ld_shlibs_CXX" >&6; } ++test "$ld_shlibs_CXX" = no && can_build_shared=no ++ ++# ++# Do we need to explicitly link libc? ++# ++case "x$archive_cmds_need_lc_CXX" in ++x|xyes) ++ # Assume -lc should be added ++ archive_cmds_need_lc_CXX=yes ++ ++ if test "$enable_shared" = yes && test "$GCC" = yes; then ++ case $archive_cmds_CXX in ++ *'~'*) ++ # FIXME: we may have to deal with multi-command sequences. ++ ;; ++ '$CC '*) ++ # Test whether the compiler implicitly links with -lc since on some ++ # systems, -lgcc has to come before -lc. If gcc already passes -lc ++ # to ld, don't add -lc before -lgcc. ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } ++ $rm conftest* ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } 2>conftest.err; then ++ soname=conftest ++ lib=conftest ++ libobjs=conftest.$ac_objext ++ deplibs= ++ wl=$lt_prog_compiler_wl_CXX ++ pic_flag=$lt_prog_compiler_pic_CXX ++ compiler_flags=-v ++ linker_flags=-v ++ verstring= ++ output_objdir=. ++ libname=conftest ++ lt_save_allow_undefined_flag=$allow_undefined_flag_CXX ++ allow_undefined_flag_CXX= ++ if { (eval echo "$as_me:$LINENO: \"$archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 ++ (eval $archive_cmds_CXX 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++ then ++ archive_cmds_need_lc_CXX=no ++ else ++ archive_cmds_need_lc_CXX=yes ++ fi ++ allow_undefined_flag_CXX=$lt_save_allow_undefined_flag ++ else ++ cat conftest.err 1>&5 ++ fi ++ $rm conftest* ++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_CXX" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc_CXX" >&6; } ++ ;; ++ esac ++ fi ++ ;; ++esac ++ ++{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } ++library_names_spec= ++libname_spec='lib$name' ++soname_spec= ++shrext_cmds=".so" ++postinstall_cmds= ++postuninstall_cmds= ++finish_cmds= ++finish_eval= ++shlibpath_var= ++shlibpath_overrides_runpath=unknown ++version_type=none ++dynamic_linker="$host_os ld.so" ++sys_lib_dlsearch_path_spec="/lib /usr/lib" ++if test "$GCC" = yes; then ++ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then ++ # if the path contains ";" then we assume it to be the separator ++ # otherwise default to the standard path separator (i.e. ":") - it is ++ # assumed that no part of a normal pathname contains ";" but that should ++ # okay in the real world where ";" in dirpaths is itself problematic. ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++else ++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" ++fi ++need_lib_prefix=unknown ++hardcode_into_libs=no ++ ++# when you set need_version to no, make sure it does not cause -set_version ++# flags to be left without arguments ++need_version=unknown ++ ++case $host_os in ++aix3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' ++ shlibpath_var=LIBPATH ++ ++ # AIX 3 has no versioning support, so we append a major version to the name. ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ ++aix4* | aix5*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ hardcode_into_libs=yes ++ if test "$host_cpu" = ia64; then ++ # AIX 5 supports IA64 ++ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ else ++ # With GCC up to 2.95.x, collect2 would create an import file ++ # for dependence libraries. The import file would start with ++ # the line `#! .'. This would cause the generated library to ++ # depend on `.', always an invalid library. This was fixed in ++ # development snapshots of GCC prior to 3.0. ++ case $host_os in ++ aix4 | aix4.[01] | aix4.[01].*) ++ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' ++ echo ' yes ' ++ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then ++ : ++ else ++ can_build_shared=no ++ fi ++ ;; ++ esac ++ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct ++ # soname into executable. Probably we can add versioning support to ++ # collect2, so additional links can be useful in future. ++ if test "$aix_use_runtimelinking" = yes; then ++ # If using run time linking (on AIX 4.2 or later) use lib.so ++ # instead of lib.a to let people know that these are not ++ # typical AIX shared libraries. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ else ++ # We preserve .a as extension for shared libraries through AIX4.2 ++ # and later when we are not doing run time linking. ++ library_names_spec='${libname}${release}.a $libname.a' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ fi ++ shlibpath_var=LIBPATH ++ fi ++ ;; ++ ++amigaos*) ++ library_names_spec='$libname.ixlibrary $libname.a' ++ # Create ${libname}_ixlibrary.a entries in /sys/libs. ++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ++ ;; ++ ++beos*) ++ library_names_spec='${libname}${shared_ext}' ++ dynamic_linker="$host_os ld.so" ++ shlibpath_var=LIBRARY_PATH ++ ;; ++ ++bsdi[45]*) ++ version_type=linux ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" ++ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" ++ # the default ld.so.conf also contains /usr/contrib/lib and ++ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow ++ # libtool to hard-code these into programs ++ ;; ++ ++cygwin* | mingw* | pw32*) ++ version_type=windows ++ shrext_cmds=".dll" ++ need_version=no ++ need_lib_prefix=no ++ ++ case $GCC,$host_os in ++ yes,cygwin* | yes,mingw* | yes,pw32*) ++ library_names_spec='$libname.dll.a' ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ ++ dldir=$destdir/`dirname \$dlpath`~ ++ test -d \$dldir || mkdir -p \$dldir~ ++ $install_prog $dir/$dlname \$dldir/$dlname~ ++ chmod a+x \$dldir/$dlname' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ dlpath=$dir/\$dldll~ ++ $rm \$dlpath' ++ shlibpath_overrides_runpath=yes ++ ++ case $host_os in ++ cygwin*) ++ # Cygwin DLLs use 'cyg' prefix rather than 'lib' ++ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ++ ;; ++ mingw*) ++ # MinGW DLLs use traditional 'lib' prefix ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then ++ # It is most probably a Windows format PATH printed by ++ # mingw gcc, but we are running on Cygwin. Gcc prints its search ++ # path with ; separators, and with drive letters. We can handle the ++ # drive letters (cygwin fileutils understands them), so leave them, ++ # especially as we might pass files found there to a mingw objdump, ++ # which wouldn't understand a cygwinified path. Ahh. ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ ;; ++ pw32*) ++ # pw32 DLLs use 'pw' prefix rather than 'lib' ++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ ;; ++ esac ++ ;; ++ ++ *) ++ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ ;; ++ esac ++ dynamic_linker='Win32 ld.exe' ++ # FIXME: first we should search . and the directory the executable is in ++ shlibpath_var=PATH ++ ;; ++ ++darwin* | rhapsody*) ++ dynamic_linker="$host_os dyld" ++ version_type=darwin ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' ++ soname_spec='${libname}${release}${major}$shared_ext' ++ shlibpath_overrides_runpath=yes ++ shlibpath_var=DYLD_LIBRARY_PATH ++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' ++ # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. ++ if test "$GCC" = yes; then ++ sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` ++ else ++ sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' ++ fi ++ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ++ ;; ++ ++dgux*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; ++ ++freebsd1*) ++ dynamic_linker=no ++ ;; ++ ++freebsd* | dragonfly*) ++ # DragonFly does not have aout. When/if they implement a new ++ # versioning mechanism, adjust this. ++ if test -x /usr/bin/objformat; then ++ objformat=`/usr/bin/objformat` ++ else ++ case $host_os in ++ freebsd[123]*) objformat=aout ;; ++ *) objformat=elf ;; ++ esac ++ fi ++ version_type=freebsd-$objformat ++ case $version_type in ++ freebsd-elf*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ need_version=no ++ need_lib_prefix=no ++ ;; ++ freebsd-*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' ++ need_version=yes ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_os in ++ freebsd2*) ++ shlibpath_overrides_runpath=yes ++ ;; ++ freebsd3.[01]* | freebsdelf3.[01]*) ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ ++ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ freebsd*) # from 4.6 on ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ esac ++ ;; ++ ++gnu*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ ;; ++ ++hpux9* | hpux10* | hpux11*) ++ # Give a soname corresponding to the major version so that dld.sl refuses to ++ # link against other versions. ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ case $host_cpu in ++ ia64*) ++ shrext_cmds='.so' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.so" ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ if test "X$HPUX_IA64_MODE" = X32; then ++ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" ++ else ++ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" ++ fi ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ hppa*64*) ++ shrext_cmds='.sl' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ *) ++ shrext_cmds='.sl' ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=SHLIB_PATH ++ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ esac ++ # HP-UX runs *really* slowly unless shared libraries are mode 555. ++ postinstall_cmds='chmod 555 $lib' ++ ;; ++ ++interix3*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ ++irix5* | irix6* | nonstopux*) ++ case $host_os in ++ nonstopux*) version_type=nonstopux ;; ++ *) ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ version_type=linux ++ else ++ version_type=irix ++ fi ;; ++ esac ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' ++ case $host_os in ++ irix5* | nonstopux*) ++ libsuff= shlibsuff= ++ ;; ++ *) ++ case $LD in # libtool.m4 will add one of these switches to LD ++ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") ++ libsuff= shlibsuff= libmagic=32-bit;; ++ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") ++ libsuff=32 shlibsuff=N32 libmagic=N32;; ++ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") ++ libsuff=64 shlibsuff=64 libmagic=64-bit;; ++ *) libsuff= shlibsuff= libmagic=never-match;; ++ esac ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" ++ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ++ hardcode_into_libs=yes ++ ;; ++ ++# No shared lib support for Linux oldld, aout, or coff. ++linux*oldld* | linux*aout* | linux*coff*) ++ dynamic_linker=no ++ ;; ++ ++# This must be Linux ELF. ++linux* | k*bsd*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ # This implies no fast_install, which is unacceptable. ++ # Some rework will be needed to allow for fast_install ++ # before this can be enabled. ++ hardcode_into_libs=yes ++ ++ # Append ld.so.conf contents to the search path ++ if test -f /etc/ld.so.conf; then ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" ++ fi ++ ++ # We used to test for /lib/ld.so.1 and disable shared libraries on ++ # powerpc, because MkLinux only supported shared libraries with the ++ # GNU dynamic linker. Since this was broken with cross compilers, ++ # most powerpc-linux boxes support dynamic linking these days and ++ # people can always --disable-shared, the test was removed, and we ++ # assume the GNU/Linux dynamic linker is in use. ++ dynamic_linker='GNU/Linux ld.so' ++ ;; ++ ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; ++ ++netbsd*) ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ dynamic_linker='NetBSD (a.out) ld.so' ++ else ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='NetBSD ld.elf_so' ++ fi ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ ++newsos6) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; ++ ++nto-qnx*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; ++ ++openbsd*) ++ version_type=sunos ++ sys_lib_dlsearch_path_spec="/usr/lib" ++ need_lib_prefix=no ++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. ++ case $host_os in ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; ++ esac ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ case $host_os in ++ openbsd2.[89] | openbsd2.[89].*) ++ shlibpath_overrides_runpath=no ++ ;; ++ *) ++ shlibpath_overrides_runpath=yes ++ ;; ++ esac ++ else ++ shlibpath_overrides_runpath=yes ++ fi ++ ;; ++ ++os2*) ++ libname_spec='$name' ++ shrext_cmds=".dll" ++ need_lib_prefix=no ++ library_names_spec='$libname${shared_ext} $libname.a' ++ dynamic_linker='OS/2 ld.exe' ++ shlibpath_var=LIBPATH ++ ;; ++ ++osf3* | osf4* | osf5*) ++ version_type=osf ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" ++ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ++ ;; ++ ++solaris*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ # ldd complains unless libraries are executable ++ postinstall_cmds='chmod +x $lib' ++ ;; ++ ++sunos4*) ++ version_type=sunos ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ if test "$with_gnu_ld" = yes; then ++ need_lib_prefix=no ++ fi ++ need_version=yes ++ ;; ++ ++sysv4 | sysv4.3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_vendor in ++ sni) ++ shlibpath_overrides_runpath=no ++ need_lib_prefix=no ++ export_dynamic_flag_spec='${wl}-Blargedynsym' ++ runpath_var=LD_RUN_PATH ++ ;; ++ siemens) ++ need_lib_prefix=no ++ ;; ++ motorola) ++ need_lib_prefix=no ++ need_version=no ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ++ ;; ++ esac ++ ;; ++ ++sysv4*MP*) ++ if test -d /usr/nec ;then ++ version_type=linux ++ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' ++ soname_spec='$libname${shared_ext}.$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ fi ++ ;; ++ ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ version_type=freebsd-elf ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ if test "$with_gnu_ld" = yes; then ++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' ++ shlibpath_overrides_runpath=no ++ else ++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' ++ shlibpath_overrides_runpath=yes ++ case $host_os in ++ sco3.2v5*) ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ++ ;; ++ esac ++ fi ++ sys_lib_dlsearch_path_spec='/usr/lib' ++ ;; ++ ++uts4*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; ++ ++*) ++ dynamic_linker=no ++ ;; ++esac ++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6; } ++test "$dynamic_linker" = no && can_build_shared=no ++ ++variables_saved_for_relink="PATH $shlibpath_var $runpath_var" ++if test "$GCC" = yes; then ++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" ++fi ++ ++{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } ++hardcode_action_CXX= ++if test -n "$hardcode_libdir_flag_spec_CXX" || \ ++ test -n "$runpath_var_CXX" || \ ++ test "X$hardcode_automatic_CXX" = "Xyes" ; then ++ ++ # We can hardcode non-existant directories. ++ if test "$hardcode_direct_CXX" != no && ++ # If the only mechanism to avoid hardcoding is shlibpath_var, we ++ # have to relink, otherwise we might link with an installed library ++ # when we should be linking with a yet-to-be-installed one ++ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, CXX)" != no && ++ test "$hardcode_minus_L_CXX" != no; then ++ # Linking always hardcodes the temporary library directory. ++ hardcode_action_CXX=relink ++ else ++ # We can link without hardcoding, and we can hardcode nonexisting dirs. ++ hardcode_action_CXX=immediate ++ fi ++else ++ # We cannot hardcode anything, or else we can only hardcode existing ++ # directories. ++ hardcode_action_CXX=unsupported ++fi ++{ echo "$as_me:$LINENO: result: $hardcode_action_CXX" >&5 ++echo "${ECHO_T}$hardcode_action_CXX" >&6; } ++ ++if test "$hardcode_action_CXX" = relink; then ++ # Fast installation is not supported ++ enable_fast_install=no ++elif test "$shlibpath_overrides_runpath" = yes || ++ test "$enable_shared" = no; then ++ # Fast installation is not necessary ++ enable_fast_install=needless ++fi ++ ++ ++# The else clause should only fire when bootstrapping the ++# libtool distribution, otherwise you forgot to ship ltmain.sh ++# with your package, and you will get complaints that there are ++# no rules to generate ltmain.sh. ++if test -f "$ltmain"; then ++ # See if we are running on zsh, and set the options which allow our commands through ++ # without removal of \ escapes. ++ if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++ fi ++ # Now quote all the things that may contain metacharacters while being ++ # careful not to overquote the AC_SUBSTed values. We take copies of the ++ # variables and quote the copies for generation of the libtool script. ++ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ ++ SED SHELL STRIP \ ++ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ ++ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ ++ deplibs_check_method reload_flag reload_cmds need_locks \ ++ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ ++ lt_cv_sys_global_symbol_to_c_name_address \ ++ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ ++ old_postinstall_cmds old_postuninstall_cmds \ ++ compiler_CXX \ ++ CC_CXX \ ++ LD_CXX \ ++ lt_prog_compiler_wl_CXX \ ++ lt_prog_compiler_pic_CXX \ ++ lt_prog_compiler_static_CXX \ ++ lt_prog_compiler_no_builtin_flag_CXX \ ++ export_dynamic_flag_spec_CXX \ ++ thread_safe_flag_spec_CXX \ ++ whole_archive_flag_spec_CXX \ ++ enable_shared_with_static_runtimes_CXX \ ++ old_archive_cmds_CXX \ ++ old_archive_from_new_cmds_CXX \ ++ predep_objects_CXX \ ++ postdep_objects_CXX \ ++ predeps_CXX \ ++ postdeps_CXX \ ++ compiler_lib_search_path_CXX \ ++ archive_cmds_CXX \ ++ archive_expsym_cmds_CXX \ ++ postinstall_cmds_CXX \ ++ postuninstall_cmds_CXX \ ++ old_archive_from_expsyms_cmds_CXX \ ++ allow_undefined_flag_CXX \ ++ no_undefined_flag_CXX \ ++ export_symbols_cmds_CXX \ ++ hardcode_libdir_flag_spec_CXX \ ++ hardcode_libdir_flag_spec_ld_CXX \ ++ hardcode_libdir_separator_CXX \ ++ hardcode_automatic_CXX \ ++ module_cmds_CXX \ ++ module_expsym_cmds_CXX \ ++ lt_cv_prog_compiler_c_o_CXX \ ++ exclude_expsyms_CXX \ ++ include_expsyms_CXX; do ++ ++ case $var in ++ old_archive_cmds_CXX | \ ++ old_archive_from_new_cmds_CXX | \ ++ archive_cmds_CXX | \ ++ archive_expsym_cmds_CXX | \ ++ module_cmds_CXX | \ ++ module_expsym_cmds_CXX | \ ++ old_archive_from_expsyms_cmds_CXX | \ ++ export_symbols_cmds_CXX | \ ++ extract_expsyms_cmds | reload_cmds | finish_cmds | \ ++ postinstall_cmds | postuninstall_cmds | \ ++ old_postinstall_cmds | old_postuninstall_cmds | \ ++ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) ++ # Double-quote double-evaled strings. ++ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ++ ;; ++ *) ++ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ++ ;; ++ esac ++ done ++ ++ case $lt_echo in ++ *'\$0 --fallback-echo"') ++ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` ++ ;; ++ esac ++ ++cfgfile="$ofile" ++ ++ cat <<__EOF__ >> "$cfgfile" ++# ### BEGIN LIBTOOL TAG CONFIG: $tagname ++ ++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++ ++# Shell to use when invoking shell scripts. ++SHELL=$lt_SHELL ++ ++# Whether or not to build shared libraries. ++build_libtool_libs=$enable_shared ++ ++# Whether or not to build static libraries. ++build_old_libs=$enable_static ++ ++# Whether or not to add -lc for building shared libraries. ++build_libtool_need_lc=$archive_cmds_need_lc_CXX ++ ++# Whether or not to disallow shared libs when runtime libs are static ++allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_CXX ++ ++# Whether or not to optimize for fast installation. ++fast_install=$enable_fast_install ++ ++# The host system. ++host_alias=$host_alias ++host=$host ++host_os=$host_os ++ ++# The build system. ++build_alias=$build_alias ++build=$build ++build_os=$build_os ++ ++# An echo program that does not interpret backslashes. ++echo=$lt_echo ++ ++# The archiver. ++AR=$lt_AR ++AR_FLAGS=$lt_AR_FLAGS ++ ++# A C compiler. ++LTCC=$lt_LTCC ++ ++# LTCC compiler flags. ++LTCFLAGS=$lt_LTCFLAGS ++ ++# A language-specific compiler. ++CC=$lt_compiler_CXX ++ ++# Is the compiler the GNU C compiler? ++with_gcc=$GCC_CXX ++ ++# An ERE matcher. ++EGREP=$lt_EGREP ++ ++# The linker used to build libraries. ++LD=$lt_LD_CXX ++ ++# Whether we need hard or soft links. ++LN_S=$lt_LN_S ++ ++# A BSD-compatible nm program. ++NM=$lt_NM ++ ++# A symbol stripping program ++STRIP=$lt_STRIP ++ ++# Used to examine libraries when file_magic_cmd begins "file" ++MAGIC_CMD=$MAGIC_CMD ++ ++# Used on cygwin: DLL creation program. ++DLLTOOL="$DLLTOOL" ++ ++# Used on cygwin: object dumper. ++OBJDUMP="$OBJDUMP" ++ ++# Used on cygwin: assembler. ++AS="$AS" ++ ++# The name of the directory that contains temporary libtool files. ++objdir=$objdir ++ ++# How to create reloadable object files. ++reload_flag=$lt_reload_flag ++reload_cmds=$lt_reload_cmds ++ ++# How to pass a linker flag through the compiler. ++wl=$lt_lt_prog_compiler_wl_CXX ++ ++# Object file suffix (normally "o"). ++objext="$ac_objext" ++ ++# Old archive suffix (normally "a"). ++libext="$libext" ++ ++# Shared library suffix (normally ".so"). ++shrext_cmds='$shrext_cmds' ++ ++# Executable file suffix (normally ""). ++exeext="$exeext" ++ ++# Additional compiler flags for building library objects. ++pic_flag=$lt_lt_prog_compiler_pic_CXX ++pic_mode=$pic_mode ++ ++# What is the maximum length of a command? ++max_cmd_len=$lt_cv_sys_max_cmd_len ++ ++# Does compiler simultaneously support -c and -o options? ++compiler_c_o=$lt_lt_cv_prog_compiler_c_o_CXX ++ ++# Must we lock files when doing compilation? ++need_locks=$lt_need_locks ++ ++# Do we need the lib prefix for modules? ++need_lib_prefix=$need_lib_prefix ++ ++# Do we need a version for libraries? ++need_version=$need_version ++ ++# Whether dlopen is supported. ++dlopen_support=$enable_dlopen ++ ++# Whether dlopen of programs is supported. ++dlopen_self=$enable_dlopen_self ++ ++# Whether dlopen of statically linked programs is supported. ++dlopen_self_static=$enable_dlopen_self_static ++ ++# Compiler flag to prevent dynamic linking. ++link_static_flag=$lt_lt_prog_compiler_static_CXX ++ ++# Compiler flag to turn off builtin functions. ++no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_CXX ++ ++# Compiler flag to allow reflexive dlopens. ++export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_CXX ++ ++# Compiler flag to generate shared objects directly from archives. ++whole_archive_flag_spec=$lt_whole_archive_flag_spec_CXX ++ ++# Compiler flag to generate thread-safe objects. ++thread_safe_flag_spec=$lt_thread_safe_flag_spec_CXX ++ ++# Library versioning type. ++version_type=$version_type ++ ++# Format of library name prefix. ++libname_spec=$lt_libname_spec ++ ++# List of archive names. First name is the real one, the rest are links. ++# The last name is the one that the linker finds with -lNAME. ++library_names_spec=$lt_library_names_spec ++ ++# The coded name of the library, if different from the real name. ++soname_spec=$lt_soname_spec ++ ++# Commands used to build and install an old-style archive. ++RANLIB=$lt_RANLIB ++old_archive_cmds=$lt_old_archive_cmds_CXX ++old_postinstall_cmds=$lt_old_postinstall_cmds ++old_postuninstall_cmds=$lt_old_postuninstall_cmds ++ ++# Create an old-style archive from a shared archive. ++old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_CXX ++ ++# Create a temporary old-style archive to link instead of a shared archive. ++old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_CXX ++ ++# Commands used to build and install a shared archive. ++archive_cmds=$lt_archive_cmds_CXX ++archive_expsym_cmds=$lt_archive_expsym_cmds_CXX ++postinstall_cmds=$lt_postinstall_cmds ++postuninstall_cmds=$lt_postuninstall_cmds ++ ++# Commands used to build a loadable module (assumed same as above if empty) ++module_cmds=$lt_module_cmds_CXX ++module_expsym_cmds=$lt_module_expsym_cmds_CXX ++ ++# Commands to strip libraries. ++old_striplib=$lt_old_striplib ++striplib=$lt_striplib ++ ++# Dependencies to place before the objects being linked to create a ++# shared library. ++predep_objects=$lt_predep_objects_CXX ++ ++# Dependencies to place after the objects being linked to create a ++# shared library. ++postdep_objects=$lt_postdep_objects_CXX ++ ++# Dependencies to place before the objects being linked to create a ++# shared library. ++predeps=$lt_predeps_CXX ++ ++# Dependencies to place after the objects being linked to create a ++# shared library. ++postdeps=$lt_postdeps_CXX ++ ++# The library search path used internally by the compiler when linking ++# a shared library. ++compiler_lib_search_path=$lt_compiler_lib_search_path_CXX ++ ++# Method to check whether dependent libraries are shared objects. ++deplibs_check_method=$lt_deplibs_check_method ++ ++# Command to use when deplibs_check_method == file_magic. ++file_magic_cmd=$lt_file_magic_cmd ++ ++# Flag that allows shared libraries with undefined symbols to be built. ++allow_undefined_flag=$lt_allow_undefined_flag_CXX ++ ++# Flag that forces no undefined symbols. ++no_undefined_flag=$lt_no_undefined_flag_CXX ++ ++# Commands used to finish a libtool library installation in a directory. ++finish_cmds=$lt_finish_cmds ++ ++# Same as above, but a single script fragment to be evaled but not shown. ++finish_eval=$lt_finish_eval ++ ++# Take the output of nm and produce a listing of raw symbols and C names. ++global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe ++ ++# Transform the output of nm in a proper C declaration ++global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl ++ ++# Transform the output of nm in a C name address pair ++global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address ++ ++# This is the shared library runtime path variable. ++runpath_var=$runpath_var ++ ++# This is the shared library path variable. ++shlibpath_var=$shlibpath_var ++ ++# Is shlibpath searched before the hard-coded library search path? ++shlibpath_overrides_runpath=$shlibpath_overrides_runpath ++ ++# How to hardcode a shared library path into an executable. ++hardcode_action=$hardcode_action_CXX ++ ++# Whether we should hardcode library paths into libraries. ++hardcode_into_libs=$hardcode_into_libs ++ ++# Flag to hardcode \$libdir into a binary during linking. ++# This must work even if \$libdir does not exist. ++hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_CXX ++ ++# If ld is used when linking, flag to hardcode \$libdir into ++# a binary during linking. This must work even if \$libdir does ++# not exist. ++hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_CXX ++ ++# Whether we need a single -rpath flag with a separated argument. ++hardcode_libdir_separator=$lt_hardcode_libdir_separator_CXX ++ ++# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the ++# resulting binary. ++hardcode_direct=$hardcode_direct_CXX ++ ++# Set to yes if using the -LDIR flag during linking hardcodes DIR into the ++# resulting binary. ++hardcode_minus_L=$hardcode_minus_L_CXX ++ ++# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into ++# the resulting binary. ++hardcode_shlibpath_var=$hardcode_shlibpath_var_CXX ++ ++# Set to yes if building a shared library automatically hardcodes DIR into the library ++# and all subsequent libraries and executables linked against it. ++hardcode_automatic=$hardcode_automatic_CXX ++ ++# Variables whose values should be saved in libtool wrapper scripts and ++# restored at relink time. ++variables_saved_for_relink="$variables_saved_for_relink" ++ ++# Whether libtool must link a program against all its dependency libraries. ++link_all_deplibs=$link_all_deplibs_CXX ++ ++# Compile-time system search path for libraries ++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec ++ ++# Run-time system search path for libraries ++sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec ++ ++# Fix the shell variable \$srcfile for the compiler. ++fix_srcfile_path="$fix_srcfile_path_CXX" ++ ++# Set to yes if exported symbols are required. ++always_export_symbols=$always_export_symbols_CXX ++ ++# The commands to list exported symbols. ++export_symbols_cmds=$lt_export_symbols_cmds_CXX ++ ++# The commands to extract the exported symbol list from a shared archive. ++extract_expsyms_cmds=$lt_extract_expsyms_cmds ++ ++# Symbols that should not be listed in the preloaded symbols. ++exclude_expsyms=$lt_exclude_expsyms_CXX ++ ++# Symbols that must always be exported. ++include_expsyms=$lt_include_expsyms_CXX ++ ++# ### END LIBTOOL TAG CONFIG: $tagname ++ ++__EOF__ ++ ++ ++else ++ # If there is no Makefile yet, we rely on a make rule to execute ++ # `config.status --recheck' to rerun these tests and create the ++ # libtool script then. ++ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` ++ if test -f "$ltmain_in"; then ++ test -f Makefile && make "$ltmain" ++ fi ++fi ++ ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++CC=$lt_save_CC ++LDCXX=$LD ++LD=$lt_save_LD ++GCC=$lt_save_GCC ++with_gnu_ldcxx=$with_gnu_ld ++with_gnu_ld=$lt_save_with_gnu_ld ++lt_cv_path_LDCXX=$lt_cv_path_LD ++lt_cv_path_LD=$lt_save_path_LD ++lt_cv_prog_gnu_ldcxx=$lt_cv_prog_gnu_ld ++lt_cv_prog_gnu_ld=$lt_save_with_gnu_ld ++ ++ else ++ tagname="" ++ fi ++ ;; ++ ++ F77) ++ if test -n "$F77" && test "X$F77" != "Xno"; then ++ ++ac_ext=f ++ac_compile='$F77 -c $FFLAGS conftest.$ac_ext >&5' ++ac_link='$F77 -o conftest$ac_exeext $FFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_f77_compiler_gnu ++ ++ ++archive_cmds_need_lc_F77=no ++allow_undefined_flag_F77= ++always_export_symbols_F77=no ++archive_expsym_cmds_F77= ++export_dynamic_flag_spec_F77= ++hardcode_direct_F77=no ++hardcode_libdir_flag_spec_F77= ++hardcode_libdir_flag_spec_ld_F77= ++hardcode_libdir_separator_F77= ++hardcode_minus_L_F77=no ++hardcode_automatic_F77=no ++module_cmds_F77= ++module_expsym_cmds_F77= ++link_all_deplibs_F77=unknown ++old_archive_cmds_F77=$old_archive_cmds ++no_undefined_flag_F77= ++whole_archive_flag_spec_F77= ++enable_shared_with_static_runtimes_F77=no ++ ++# Source file extension for f77 test sources. ++ac_ext=f ++ ++# Object file extension for compiled f77 test sources. ++objext=o ++objext_F77=$objext ++ ++# Code to be used in simple compile tests ++lt_simple_compile_test_code=" subroutine t\n return\n end\n" ++ ++# Code to be used in simple link tests ++lt_simple_link_test_code=" program t\n end\n" ++ ++# ltmain only uses $CC for tagged configurations so make sure $CC is set. ++ ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} ++ ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++ ++# Allow CC to be a program name with arguments. ++compiler=$CC ++ ++ ++# save warnings/boilerplate of simple test code ++ac_outfile=conftest.$ac_objext ++printf "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$rm conftest* ++ ++ac_outfile=conftest.$ac_objext ++printf "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$rm conftest* ++ ++ ++# Allow CC to be a program name with arguments. ++lt_save_CC="$CC" ++CC=${F77-"f77"} ++compiler=$CC ++compiler_F77=$CC ++for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++ ++ ++{ echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 ++echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6; } ++{ echo "$as_me:$LINENO: result: $can_build_shared" >&5 ++echo "${ECHO_T}$can_build_shared" >&6; } ++ ++{ echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 ++echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6; } ++test "$can_build_shared" = "no" && enable_shared=no ++ ++# On AIX, shared libraries and static libraries use the same namespace, and ++# are all built from PIC. ++case $host_os in ++aix3*) ++ test "$enable_shared" = yes && enable_static=no ++ if test -n "$RANLIB"; then ++ archive_cmds="$archive_cmds~\$RANLIB \$lib" ++ postinstall_cmds='$RANLIB $lib' ++ fi ++ ;; ++aix4* | aix5*) ++ if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then ++ test "$enable_shared" = yes && enable_static=no ++ fi ++ ;; ++esac ++{ echo "$as_me:$LINENO: result: $enable_shared" >&5 ++echo "${ECHO_T}$enable_shared" >&6; } ++ ++{ echo "$as_me:$LINENO: checking whether to build static libraries" >&5 ++echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6; } ++# Make sure either enable_shared or enable_static is yes. ++test "$enable_shared" = yes || enable_static=yes ++{ echo "$as_me:$LINENO: result: $enable_static" >&5 ++echo "${ECHO_T}$enable_static" >&6; } ++ ++GCC_F77="$G77" ++LD_F77="$LD" ++ ++lt_prog_compiler_wl_F77= ++lt_prog_compiler_pic_F77= ++lt_prog_compiler_static_F77= ++ ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } ++ ++ if test "$GCC" = yes; then ++ lt_prog_compiler_wl_F77='-Wl,' ++ lt_prog_compiler_static_F77='-static' ++ ++ case $host_os in ++ aix*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static_F77='-Bstatic' ++ fi ++ ;; ++ ++ amigaos*) ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ lt_prog_compiler_pic_F77='-m68020 -resident32 -malways-restore-a4' ++ ;; ++ ++ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. ++ ;; ++ ++ mingw* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ lt_prog_compiler_pic_F77='-DDLL_EXPORT' ++ ;; ++ ++ darwin* | rhapsody*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ lt_prog_compiler_pic_F77='-fno-common' ++ ;; ++ ++ interix3*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; ++ ++ msdosdjgpp*) ++ # Just because we use GCC doesn't mean we suddenly get shared libraries ++ # on systems that don't support them. ++ lt_prog_compiler_can_build_shared_F77=no ++ enable_shared=no ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ lt_prog_compiler_pic_F77=-Kconform_pic ++ fi ++ ;; ++ ++ hpux*) ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ lt_prog_compiler_pic_F77='-fPIC' ++ ;; ++ esac ++ ;; ++ ++ *) ++ lt_prog_compiler_pic_F77='-fPIC' ++ ;; ++ esac ++ else ++ # PORTME Check for flag to pass linker flags through the system compiler. ++ case $host_os in ++ aix*) ++ lt_prog_compiler_wl_F77='-Wl,' ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static_F77='-Bstatic' ++ else ++ lt_prog_compiler_static_F77='-bnso -bI:/lib/syscalls.exp' ++ fi ++ ;; ++ darwin*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ case $cc_basename in ++ xlc*) ++ lt_prog_compiler_pic_F77='-qnocommon' ++ lt_prog_compiler_wl_F77='-Wl,' ++ ;; ++ esac ++ ;; ++ ++ mingw* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ lt_prog_compiler_pic_F77='-DDLL_EXPORT' ++ ;; ++ ++ hpux9* | hpux10* | hpux11*) ++ lt_prog_compiler_wl_F77='-Wl,' ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ lt_prog_compiler_pic_F77='+Z' ++ ;; ++ esac ++ # Is there a better lt_prog_compiler_static that works with the bundled CC? ++ lt_prog_compiler_static_F77='${wl}-a ${wl}archive' ++ ;; ++ ++ irix5* | irix6* | nonstopux*) ++ lt_prog_compiler_wl_F77='-Wl,' ++ # PIC (with -KPIC) is the default. ++ lt_prog_compiler_static_F77='-non_shared' ++ ;; ++ ++ newsos6) ++ lt_prog_compiler_pic_F77='-KPIC' ++ lt_prog_compiler_static_F77='-Bstatic' ++ ;; ++ ++ linux* | k*bsd*-gnu) ++ case $cc_basename in ++ icc* | ecc*) ++ lt_prog_compiler_wl_F77='-Wl,' ++ lt_prog_compiler_pic_F77='-KPIC' ++ lt_prog_compiler_static_F77='-static' ++ ;; ++ pgcc* | pgf77* | pgf90* | pgf95*) ++ # Portland Group compilers (*not* the Pentium gcc compiler, ++ # which looks to be a dead project) ++ lt_prog_compiler_wl_F77='-Wl,' ++ lt_prog_compiler_pic_F77='-fpic' ++ lt_prog_compiler_static_F77='-Bstatic' ++ ;; ++ ccc*) ++ lt_prog_compiler_wl_F77='-Wl,' ++ # All Alpha code is PIC. ++ lt_prog_compiler_static_F77='-non_shared' ++ ;; ++ esac ++ ;; ++ ++ osf3* | osf4* | osf5*) ++ lt_prog_compiler_wl_F77='-Wl,' ++ # All OSF/1 code is PIC. ++ lt_prog_compiler_static_F77='-non_shared' ++ ;; ++ ++ solaris*) ++ lt_prog_compiler_pic_F77='-KPIC' ++ lt_prog_compiler_static_F77='-Bstatic' ++ case $cc_basename in ++ f77* | f90* | f95*) ++ lt_prog_compiler_wl_F77='-Qoption ld ';; ++ *) ++ lt_prog_compiler_wl_F77='-Wl,';; ++ esac ++ ;; ++ ++ sunos4*) ++ lt_prog_compiler_wl_F77='-Qoption ld ' ++ lt_prog_compiler_pic_F77='-PIC' ++ lt_prog_compiler_static_F77='-Bstatic' ++ ;; ++ ++ sysv4 | sysv4.2uw2* | sysv4.3*) ++ lt_prog_compiler_wl_F77='-Wl,' ++ lt_prog_compiler_pic_F77='-KPIC' ++ lt_prog_compiler_static_F77='-Bstatic' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec ;then ++ lt_prog_compiler_pic_F77='-Kconform_pic' ++ lt_prog_compiler_static_F77='-Bstatic' ++ fi ++ ;; ++ ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ lt_prog_compiler_wl_F77='-Wl,' ++ lt_prog_compiler_pic_F77='-KPIC' ++ lt_prog_compiler_static_F77='-Bstatic' ++ ;; ++ ++ unicos*) ++ lt_prog_compiler_wl_F77='-Wl,' ++ lt_prog_compiler_can_build_shared_F77=no ++ ;; ++ ++ uts4*) ++ lt_prog_compiler_pic_F77='-pic' ++ lt_prog_compiler_static_F77='-Bstatic' ++ ;; ++ ++ *) ++ lt_prog_compiler_can_build_shared_F77=no ++ ;; ++ esac ++ fi ++ ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_F77" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_F77" >&6; } ++ ++# ++# Check to make sure the PIC flag actually works. ++# ++if test -n "$lt_prog_compiler_pic_F77"; then ++ ++{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_F77 works... $ECHO_C" >&6; } ++if test "${lt_prog_compiler_pic_works_F77+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_prog_compiler_pic_works_F77=no ++ ac_outfile=conftest.$ac_objext ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="$lt_prog_compiler_pic_F77" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:14182: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&5 ++ echo "$as_me:14186: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_prog_compiler_pic_works_F77=yes ++ fi ++ fi ++ $rm conftest* ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_F77" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_works_F77" >&6; } ++ ++if test x"$lt_prog_compiler_pic_works_F77" = xyes; then ++ case $lt_prog_compiler_pic_F77 in ++ "" | " "*) ;; ++ *) lt_prog_compiler_pic_F77=" $lt_prog_compiler_pic_F77" ;; ++ esac ++else ++ lt_prog_compiler_pic_F77= ++ lt_prog_compiler_can_build_shared_F77=no ++fi ++ ++fi ++case $host_os in ++ # For platforms which do not support PIC, -DPIC is meaningless: ++ *djgpp*) ++ lt_prog_compiler_pic_F77= ++ ;; ++ *) ++ lt_prog_compiler_pic_F77="$lt_prog_compiler_pic_F77" ++ ;; ++esac ++ ++# ++# Check to make sure the static flag actually works. ++# ++wl=$lt_prog_compiler_wl_F77 eval lt_tmp_static_flag=\"$lt_prog_compiler_static_F77\" ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } ++if test "${lt_prog_compiler_static_works_F77+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_prog_compiler_static_works_F77=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $lt_tmp_static_flag" ++ printf "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&5 ++ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ lt_prog_compiler_static_works_F77=yes ++ fi ++ else ++ lt_prog_compiler_static_works_F77=yes ++ fi ++ fi ++ $rm conftest* ++ LDFLAGS="$save_LDFLAGS" ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_F77" >&5 ++echo "${ECHO_T}$lt_prog_compiler_static_works_F77" >&6; } ++ ++if test x"$lt_prog_compiler_static_works_F77" = xyes; then ++ : ++else ++ lt_prog_compiler_static_F77= ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_c_o_F77+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_c_o_F77=no ++ $rm -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:14286: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&5 ++ echo "$as_me:14290: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_c_o_F77=yes ++ fi ++ fi ++ chmod u+w . 2>&5 ++ $rm conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files ++ $rm out/* && rmdir out ++ cd .. ++ rmdir conftest ++ $rm conftest* ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_F77" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o_F77" >&6; } ++ ++ ++hard_links="nottested" ++if test "$lt_cv_prog_compiler_c_o_F77" = no && test "$need_locks" != no; then ++ # do not overwrite the value of need_locks provided by the user ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } ++ hard_links=yes ++ $rm conftest* ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ touch conftest.a ++ ln conftest.a conftest.b 2>&5 || hard_links=no ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ { echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6; } ++ if test "$hard_links" = no; then ++ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 ++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} ++ need_locks=warn ++ fi ++else ++ need_locks=no ++fi ++ ++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } ++ ++ runpath_var= ++ allow_undefined_flag_F77= ++ enable_shared_with_static_runtimes_F77=no ++ archive_cmds_F77= ++ archive_expsym_cmds_F77= ++ old_archive_From_new_cmds_F77= ++ old_archive_from_expsyms_cmds_F77= ++ export_dynamic_flag_spec_F77= ++ whole_archive_flag_spec_F77= ++ thread_safe_flag_spec_F77= ++ hardcode_libdir_flag_spec_F77= ++ hardcode_libdir_flag_spec_ld_F77= ++ hardcode_libdir_separator_F77= ++ hardcode_direct_F77=no ++ hardcode_minus_L_F77=no ++ hardcode_shlibpath_var_F77=unsupported ++ link_all_deplibs_F77=unknown ++ hardcode_automatic_F77=no ++ module_cmds_F77= ++ module_expsym_cmds_F77= ++ always_export_symbols_F77=no ++ export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ # include_expsyms should be a list of space-separated symbols to be *always* ++ # included in the symbol list ++ include_expsyms_F77= ++ # exclude_expsyms can be an extended regexp of symbols to exclude ++ # it will be wrapped by ` (' and `)$', so one must not match beginning or ++ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', ++ # as well as any symbol that contains `d'. ++ exclude_expsyms_F77="_GLOBAL_OFFSET_TABLE_" ++ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out ++ # platforms (ab)use it in PIC code, but their linkers get confused if ++ # the symbol is explicitly referenced. Since portable code cannot ++ # rely on this symbol name, it's probably fine to never include it in ++ # preloaded symbol tables. ++ extract_expsyms_cmds= ++ # Just being paranoid about ensuring that cc_basename is set. ++ for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++ ++ case $host_os in ++ cygwin* | mingw* | pw32*) ++ # FIXME: the MSVC++ port hasn't been tested in a loooong time ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ if test "$GCC" != yes; then ++ with_gnu_ld=no ++ fi ++ ;; ++ interix*) ++ # we just hope/assume this is gcc and not c89 (= MSVC++) ++ with_gnu_ld=yes ++ ;; ++ openbsd*) ++ with_gnu_ld=no ++ ;; ++ esac ++ ++ ld_shlibs_F77=yes ++ if test "$with_gnu_ld" = yes; then ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ wlarc='${wl}' ++ ++ # Set some defaults for GNU ld with shared library support. These ++ # are reset later if shared libraries are not supported. Putting them ++ # here allows them to be overridden if necessary. ++ runpath_var=LD_RUN_PATH ++ hardcode_libdir_flag_spec_F77='${wl}--rpath ${wl}$libdir' ++ export_dynamic_flag_spec_F77='${wl}--export-dynamic' ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then ++ whole_archive_flag_spec_F77="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ whole_archive_flag_spec_F77= ++ fi ++ supports_anon_versioning=no ++ case `$LD -v 2>/dev/null` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 ++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... ++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... ++ *\ 2.11.*) ;; # other 2.11 versions ++ *) supports_anon_versioning=yes ;; ++ esac ++ ++ # See if GNU ld supports shared libraries. ++ case $host_os in ++ aix3* | aix4* | aix5*) ++ # On AIX/PPC, the GNU linker is very broken ++ if test "$host_cpu" != ia64; then ++ ld_shlibs_F77=no ++ cat <&2 ++ ++*** Warning: the GNU linker, at least up to release 2.9.1, is reported ++*** to be unable to reliably create shared libraries on AIX. ++*** Therefore, libtool is disabling shared libraries support. If you ++*** really care for shared libraries, you may want to modify your PATH ++*** so that a non-GNU linker is found, and then restart. ++ ++EOF ++ fi ++ ;; ++ ++ amigaos*) ++ archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ hardcode_libdir_flag_spec_F77='-L$libdir' ++ hardcode_minus_L_F77=yes ++ ++ # Samuel A. Falvo II reports ++ # that the semantics of dynamic libraries on AmigaOS, at least up ++ # to version 4, is to share data among multiple programs linked ++ # with the same dynamic library. Since this doesn't match the ++ # behavior of shared libraries on other platforms, we can't use ++ # them. ++ ld_shlibs_F77=no ++ ;; ++ ++ beos*) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ allow_undefined_flag_F77=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ archive_cmds_F77='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ ld_shlibs_F77=no ++ fi ++ ;; ++ ++ cygwin* | mingw* | pw32*) ++ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, F77) is actually meaningless, ++ # as there is no search path for DLLs. ++ hardcode_libdir_flag_spec_F77='-L$libdir' ++ allow_undefined_flag_F77=unsupported ++ always_export_symbols_F77=no ++ enable_shared_with_static_runtimes_F77=yes ++ export_symbols_cmds_F77='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' ++ ++ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then ++ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ archive_expsym_cmds_F77='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ ld_shlibs_F77=no ++ fi ++ ;; ++ ++ interix3*) ++ hardcode_direct_F77=no ++ hardcode_shlibpath_var_F77=no ++ hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec_F77='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ archive_cmds_F77='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ archive_expsym_cmds_F77='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; ++ ++ linux* | k*bsd*-gnu) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ tmp_addflag= ++ case $cc_basename,$host_cpu in ++ pgcc*) # Portland Group C compiler ++ whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag' ++ ;; ++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers ++ whole_archive_flag_spec_F77='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag -Mnomain' ;; ++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 ++ tmp_addflag=' -i_dynamic' ;; ++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 ++ tmp_addflag=' -i_dynamic -nofor_main' ;; ++ ifc* | ifort*) # Intel Fortran compiler ++ tmp_addflag=' -nofor_main' ;; ++ esac ++ archive_cmds_F77='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ ++ if test $supports_anon_versioning = yes; then ++ archive_expsym_cmds_F77='$echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ $echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi ++ link_all_deplibs_F77=no ++ else ++ ld_shlibs_F77=no ++ fi ++ ;; ++ ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ archive_cmds_F77='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' ++ wlarc= ++ else ++ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ fi ++ ;; ++ ++ solaris*) ++ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then ++ ld_shlibs_F77=no ++ cat <&2 ++ ++*** Warning: The releases 2.8.* of the GNU linker cannot reliably ++*** create shared libraries on Solaris systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.9.1 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++EOF ++ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs_F77=no ++ fi ++ ;; ++ ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) ++ case `$LD -v 2>&1` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ++ ld_shlibs_F77=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not ++*** reliably create shared libraries on SCO systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++_LT_EOF ++ ;; ++ *) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' ++ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' ++ archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' ++ else ++ ld_shlibs_F77=no ++ fi ++ ;; ++ esac ++ ;; ++ ++ sunos4*) ++ archive_cmds_F77='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ wlarc= ++ hardcode_direct_F77=yes ++ hardcode_shlibpath_var_F77=no ++ ;; ++ ++ *) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs_F77=no ++ fi ++ ;; ++ esac ++ ++ if test "$ld_shlibs_F77" = no; then ++ runpath_var= ++ hardcode_libdir_flag_spec_F77= ++ export_dynamic_flag_spec_F77= ++ whole_archive_flag_spec_F77= ++ fi ++ else ++ # PORTME fill in a description of your system's linker (not GNU ld) ++ case $host_os in ++ aix3*) ++ allow_undefined_flag_F77=unsupported ++ always_export_symbols_F77=yes ++ archive_expsym_cmds_F77='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' ++ # Note: this linker hardcodes the directories in LIBPATH if there ++ # are no directories specified by -L. ++ hardcode_minus_L_F77=yes ++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then ++ # Neither direct hardcoding nor static linking is supported with a ++ # broken collect2. ++ hardcode_direct_F77=unsupported ++ fi ++ ;; ++ ++ aix4* | aix5*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then ++ export_symbols_cmds_F77='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' ++ else ++ export_symbols_cmds_F77='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' ++ fi ++ aix_use_runtimelinking=no ++ ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[23]|aix4.[23].*|aix5*) ++ for ld_flag in $LDFLAGS; do ++ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then ++ aix_use_runtimelinking=yes ++ break ++ fi ++ done ++ ;; ++ esac ++ ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' ++ fi ++ ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++ ++ archive_cmds_F77='' ++ hardcode_direct_F77=yes ++ hardcode_libdir_separator_F77=':' ++ link_all_deplibs_F77=yes ++ ++ if test "$GCC" = yes; then ++ case $host_os in aix4.[012]|aix4.[012].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && \ ++ strings "$collect2name" | grep resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ hardcode_direct_F77=yes ++ else ++ # We have old collect2 ++ hardcode_direct_F77=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ hardcode_minus_L_F77=yes ++ hardcode_libdir_flag_spec_F77='-L$libdir' ++ hardcode_libdir_separator_F77= ++ fi ++ ;; ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi ++ fi ++ fi ++ ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to export. ++ always_export_symbols_F77=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ allow_undefined_flag_F77='-berok' ++ # Determine the default libpath from the value encoded in an empty executable. ++ cat >conftest.$ac_ext <<_ACEOF ++ program main ++ ++ end ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_f77_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'`; fi ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ ++ hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" ++ archive_expsym_cmds_F77="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ hardcode_libdir_flag_spec_F77='${wl}-R $libdir:/usr/lib:/lib' ++ allow_undefined_flag_F77="-z nodefs" ++ archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an empty executable. ++ cat >conftest.$ac_ext <<_ACEOF ++ program main ++ ++ end ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_f77_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'`; fi ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ ++ hardcode_libdir_flag_spec_F77='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ no_undefined_flag_F77=' ${wl}-bernotok' ++ allow_undefined_flag_F77=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ whole_archive_flag_spec_F77='$convenience' ++ archive_cmds_need_lc_F77=yes ++ # This is similar to how AIX traditionally builds its shared libraries. ++ archive_expsym_cmds_F77="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi ++ fi ++ ;; ++ ++ amigaos*) ++ archive_cmds_F77='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ hardcode_libdir_flag_spec_F77='-L$libdir' ++ hardcode_minus_L_F77=yes ++ # see comment about different semantics on the GNU ld section ++ ld_shlibs_F77=no ++ ;; ++ ++ bsdi[45]*) ++ export_dynamic_flag_spec_F77=-rdynamic ++ ;; ++ ++ cygwin* | mingw* | pw32*) ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ # hardcode_libdir_flag_spec is actually meaningless, as there is ++ # no search path for DLLs. ++ hardcode_libdir_flag_spec_F77=' ' ++ allow_undefined_flag_F77=unsupported ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds_F77='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' ++ # The linker will automatically build a .lib file if we build a DLL. ++ old_archive_From_new_cmds_F77='true' ++ # FIXME: Should let the user specify the lib program. ++ old_archive_cmds_F77='lib /OUT:$oldlib$oldobjs$old_deplibs' ++ fix_srcfile_path_F77='`cygpath -w "$srcfile"`' ++ enable_shared_with_static_runtimes_F77=yes ++ ;; ++ ++ darwin* | rhapsody*) ++ case $host_os in ++ rhapsody* | darwin1.[012]) ++ allow_undefined_flag_F77='${wl}-undefined ${wl}suppress' ++ ;; ++ *) # Darwin 1.3 on ++ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then ++ allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ else ++ case ${MACOSX_DEPLOYMENT_TARGET} in ++ 10.[012]) ++ allow_undefined_flag_F77='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ ;; ++ 10.*) ++ allow_undefined_flag_F77='${wl}-undefined ${wl}dynamic_lookup' ++ ;; ++ esac ++ fi ++ ;; ++ esac ++ archive_cmds_need_lc_F77=no ++ hardcode_direct_F77=no ++ hardcode_automatic_F77=yes ++ hardcode_shlibpath_var_F77=unsupported ++ whole_archive_flag_spec_F77='' ++ link_all_deplibs_F77=yes ++ if test "$GCC" = yes ; then ++ output_verbose_link_cmd='echo' ++ archive_cmds_F77='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' ++ module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ else ++ case $cc_basename in ++ xlc*) ++ output_verbose_link_cmd='echo' ++ archive_cmds_F77='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' ++ module_cmds_F77='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ archive_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ module_expsym_cmds_F77='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ ;; ++ *) ++ ld_shlibs_F77=no ++ ;; ++ esac ++ fi ++ ;; ++ ++ dgux*) ++ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec_F77='-L$libdir' ++ hardcode_shlibpath_var_F77=no ++ ;; ++ ++ freebsd1*) ++ ld_shlibs_F77=no ++ ;; ++ ++ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor ++ # support. Future versions do this automatically, but an explicit c++rt0.o ++ # does not break anything, and helps significantly (at the cost of a little ++ # extra space). ++ freebsd2.2*) ++ archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' ++ hardcode_libdir_flag_spec_F77='-R$libdir' ++ hardcode_direct_F77=yes ++ hardcode_shlibpath_var_F77=no ++ ;; ++ ++ # Unfortunately, older versions of FreeBSD 2 do not have this feature. ++ freebsd2*) ++ archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct_F77=yes ++ hardcode_minus_L_F77=yes ++ hardcode_shlibpath_var_F77=no ++ ;; ++ ++ # FreeBSD 3 and greater uses gcc -shared to do shared libraries. ++ freebsd* | dragonfly*) ++ archive_cmds_F77='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec_F77='-R$libdir' ++ hardcode_direct_F77=yes ++ hardcode_shlibpath_var_F77=no ++ ;; ++ ++ hpux9*) ++ if test "$GCC" = yes; then ++ archive_cmds_F77='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ archive_cmds_F77='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ fi ++ hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator_F77=: ++ hardcode_direct_F77=yes ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L_F77=yes ++ export_dynamic_flag_spec_F77='${wl}-E' ++ ;; ++ ++ hpux10*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds_F77='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator_F77=: ++ ++ hardcode_direct_F77=yes ++ export_dynamic_flag_spec_F77='${wl}-E' ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L_F77=yes ++ fi ++ ;; ++ ++ hpux11*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds_F77='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds_F77='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ else ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds_F77='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec_F77='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator_F77=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) ++ hardcode_libdir_flag_spec_ld_F77='+b $libdir' ++ hardcode_direct_F77=no ++ hardcode_shlibpath_var_F77=no ++ ;; ++ *) ++ hardcode_direct_F77=yes ++ export_dynamic_flag_spec_F77='${wl}-E' ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L_F77=yes ++ ;; ++ esac ++ fi ++ ;; ++ ++ irix5* | irix6* | nonstopux*) ++ if test "$GCC" = yes; then ++ archive_cmds_F77='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ archive_cmds_F77='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ hardcode_libdir_flag_spec_ld_F77='-rpath $libdir' ++ fi ++ hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator_F77=: ++ link_all_deplibs_F77=yes ++ ;; ++ ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out ++ else ++ archive_cmds_F77='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF ++ fi ++ hardcode_libdir_flag_spec_F77='-R$libdir' ++ hardcode_direct_F77=yes ++ hardcode_shlibpath_var_F77=no ++ ;; ++ ++ newsos6) ++ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct_F77=yes ++ hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator_F77=: ++ hardcode_shlibpath_var_F77=no ++ ;; ++ ++ openbsd*) ++ hardcode_direct_F77=yes ++ hardcode_shlibpath_var_F77=no ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' ++ hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec_F77='${wl}-E' ++ else ++ case $host_os in ++ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) ++ archive_cmds_F77='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec_F77='-R$libdir' ++ ;; ++ *) ++ archive_cmds_F77='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec_F77='${wl}-rpath,$libdir' ++ ;; ++ esac ++ fi ++ ;; ++ ++ os2*) ++ hardcode_libdir_flag_spec_F77='-L$libdir' ++ hardcode_minus_L_F77=yes ++ allow_undefined_flag_F77=unsupported ++ archive_cmds_F77='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' ++ old_archive_From_new_cmds_F77='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ++ ;; ++ ++ osf3*) ++ if test "$GCC" = yes; then ++ allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ allow_undefined_flag_F77=' -expect_unresolved \*' ++ archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ fi ++ hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator_F77=: ++ ;; ++ ++ osf4* | osf5*) # as osf3* with the addition of -msym flag ++ if test "$GCC" = yes; then ++ allow_undefined_flag_F77=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds_F77='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ hardcode_libdir_flag_spec_F77='${wl}-rpath ${wl}$libdir' ++ else ++ allow_undefined_flag_F77=' -expect_unresolved \*' ++ archive_cmds_F77='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ archive_expsym_cmds_F77='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ ++ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' ++ ++ # Both c and cxx compiler support -rpath directly ++ hardcode_libdir_flag_spec_F77='-rpath $libdir' ++ fi ++ hardcode_libdir_separator_F77=: ++ ;; ++ ++ solaris*) ++ no_undefined_flag_F77=' -z text' ++ if test "$GCC" = yes; then ++ wlarc='${wl}' ++ archive_cmds_F77='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ ++ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' ++ else ++ wlarc='' ++ archive_cmds_F77='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ archive_expsym_cmds_F77='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ ++ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' ++ fi ++ hardcode_libdir_flag_spec_F77='-R$libdir' ++ hardcode_shlibpath_var_F77=no ++ case $host_os in ++ solaris2.[0-5] | solaris2.[0-5].*) ;; ++ *) ++ # The compiler driver will combine linker options so we ++ # cannot just pass the convience library names through ++ # without $wl, iff we do not link with $LD. ++ # Luckily, gcc supports the same syntax we need for Sun Studio. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ case $wlarc in ++ '') ++ whole_archive_flag_spec_F77='-z allextract$convenience -z defaultextract' ;; ++ *) ++ whole_archive_flag_spec_F77='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; ++ esac ;; ++ esac ++ link_all_deplibs_F77=yes ++ ;; ++ ++ sunos4*) ++ if test "x$host_vendor" = xsequent; then ++ # Use $CC to link under sequent, because it throws in some extra .o ++ # files that make .init and .fini sections work. ++ archive_cmds_F77='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds_F77='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ hardcode_libdir_flag_spec_F77='-L$libdir' ++ hardcode_direct_F77=yes ++ hardcode_minus_L_F77=yes ++ hardcode_shlibpath_var_F77=no ++ ;; ++ ++ sysv4) ++ case $host_vendor in ++ sni) ++ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct_F77=yes # is this really true??? ++ ;; ++ siemens) ++ ## LD is ld it makes a PLAMLIB ++ ## CC just makes a GrossModule. ++ archive_cmds_F77='$LD -G -o $lib $libobjs $deplibs $linker_flags' ++ reload_cmds_F77='$CC -r -o $output$reload_objs' ++ hardcode_direct_F77=no ++ ;; ++ motorola) ++ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct_F77=no #Motorola manual says yes, but my tests say they lie ++ ;; ++ esac ++ runpath_var='LD_RUN_PATH' ++ hardcode_shlibpath_var_F77=no ++ ;; ++ ++ sysv4.3*) ++ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_shlibpath_var_F77=no ++ export_dynamic_flag_spec_F77='-Bexport' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_shlibpath_var_F77=no ++ runpath_var=LD_RUN_PATH ++ hardcode_runpath_var=yes ++ ld_shlibs_F77=yes ++ fi ++ ;; ++ ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*) ++ no_undefined_flag_F77='${wl}-z,text' ++ archive_cmds_need_lc_F77=no ++ hardcode_shlibpath_var_F77=no ++ runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ archive_cmds_F77='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds_F77='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; ++ ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ no_undefined_flag_F77='${wl}-z,text' ++ allow_undefined_flag_F77='${wl}-z,nodefs' ++ archive_cmds_need_lc_F77=no ++ hardcode_shlibpath_var_F77=no ++ hardcode_libdir_flag_spec_F77='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' ++ hardcode_libdir_separator_F77=':' ++ link_all_deplibs_F77=yes ++ export_dynamic_flag_spec_F77='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ archive_cmds_F77='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_F77='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds_F77='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_F77='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; ++ ++ uts4*) ++ archive_cmds_F77='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec_F77='-L$libdir' ++ hardcode_shlibpath_var_F77=no ++ ;; ++ ++ *) ++ ld_shlibs_F77=no ++ ;; ++ esac ++ fi ++ ++{ echo "$as_me:$LINENO: result: $ld_shlibs_F77" >&5 ++echo "${ECHO_T}$ld_shlibs_F77" >&6; } ++test "$ld_shlibs_F77" = no && can_build_shared=no ++ ++# ++# Do we need to explicitly link libc? ++# ++case "x$archive_cmds_need_lc_F77" in ++x|xyes) ++ # Assume -lc should be added ++ archive_cmds_need_lc_F77=yes ++ ++ if test "$enable_shared" = yes && test "$GCC" = yes; then ++ case $archive_cmds_F77 in ++ *'~'*) ++ # FIXME: we may have to deal with multi-command sequences. ++ ;; ++ '$CC '*) ++ # Test whether the compiler implicitly links with -lc since on some ++ # systems, -lgcc has to come before -lc. If gcc already passes -lc ++ # to ld, don't add -lc before -lgcc. ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } ++ $rm conftest* ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } 2>conftest.err; then ++ soname=conftest ++ lib=conftest ++ libobjs=conftest.$ac_objext ++ deplibs= ++ wl=$lt_prog_compiler_wl_F77 ++ pic_flag=$lt_prog_compiler_pic_F77 ++ compiler_flags=-v ++ linker_flags=-v ++ verstring= ++ output_objdir=. ++ libname=conftest ++ lt_save_allow_undefined_flag=$allow_undefined_flag_F77 ++ allow_undefined_flag_F77= ++ if { (eval echo "$as_me:$LINENO: \"$archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 ++ (eval $archive_cmds_F77 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++ then ++ archive_cmds_need_lc_F77=no ++ else ++ archive_cmds_need_lc_F77=yes ++ fi ++ allow_undefined_flag_F77=$lt_save_allow_undefined_flag ++ else ++ cat conftest.err 1>&5 ++ fi ++ $rm conftest* ++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_F77" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc_F77" >&6; } ++ ;; ++ esac ++ fi ++ ;; ++esac ++ ++{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } ++library_names_spec= ++libname_spec='lib$name' ++soname_spec= ++shrext_cmds=".so" ++postinstall_cmds= ++postuninstall_cmds= ++finish_cmds= ++finish_eval= ++shlibpath_var= ++shlibpath_overrides_runpath=unknown ++version_type=none ++dynamic_linker="$host_os ld.so" ++sys_lib_dlsearch_path_spec="/lib /usr/lib" ++if test "$GCC" = yes; then ++ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then ++ # if the path contains ";" then we assume it to be the separator ++ # otherwise default to the standard path separator (i.e. ":") - it is ++ # assumed that no part of a normal pathname contains ";" but that should ++ # okay in the real world where ";" in dirpaths is itself problematic. ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++else ++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" ++fi ++need_lib_prefix=unknown ++hardcode_into_libs=no ++ ++# when you set need_version to no, make sure it does not cause -set_version ++# flags to be left without arguments ++need_version=unknown ++ ++case $host_os in ++aix3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' ++ shlibpath_var=LIBPATH ++ ++ # AIX 3 has no versioning support, so we append a major version to the name. ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ ++aix4* | aix5*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ hardcode_into_libs=yes ++ if test "$host_cpu" = ia64; then ++ # AIX 5 supports IA64 ++ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ else ++ # With GCC up to 2.95.x, collect2 would create an import file ++ # for dependence libraries. The import file would start with ++ # the line `#! .'. This would cause the generated library to ++ # depend on `.', always an invalid library. This was fixed in ++ # development snapshots of GCC prior to 3.0. ++ case $host_os in ++ aix4 | aix4.[01] | aix4.[01].*) ++ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' ++ echo ' yes ' ++ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then ++ : ++ else ++ can_build_shared=no ++ fi ++ ;; ++ esac ++ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct ++ # soname into executable. Probably we can add versioning support to ++ # collect2, so additional links can be useful in future. ++ if test "$aix_use_runtimelinking" = yes; then ++ # If using run time linking (on AIX 4.2 or later) use lib.so ++ # instead of lib.a to let people know that these are not ++ # typical AIX shared libraries. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ else ++ # We preserve .a as extension for shared libraries through AIX4.2 ++ # and later when we are not doing run time linking. ++ library_names_spec='${libname}${release}.a $libname.a' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ fi ++ shlibpath_var=LIBPATH ++ fi ++ ;; ++ ++amigaos*) ++ library_names_spec='$libname.ixlibrary $libname.a' ++ # Create ${libname}_ixlibrary.a entries in /sys/libs. ++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ++ ;; ++ ++beos*) ++ library_names_spec='${libname}${shared_ext}' ++ dynamic_linker="$host_os ld.so" ++ shlibpath_var=LIBRARY_PATH ++ ;; ++ ++bsdi[45]*) ++ version_type=linux ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" ++ sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" ++ # the default ld.so.conf also contains /usr/contrib/lib and ++ # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow ++ # libtool to hard-code these into programs ++ ;; ++ ++cygwin* | mingw* | pw32*) ++ version_type=windows ++ shrext_cmds=".dll" ++ need_version=no ++ need_lib_prefix=no ++ ++ case $GCC,$host_os in ++ yes,cygwin* | yes,mingw* | yes,pw32*) ++ library_names_spec='$libname.dll.a' ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ ++ dldir=$destdir/`dirname \$dlpath`~ ++ test -d \$dldir || mkdir -p \$dldir~ ++ $install_prog $dir/$dlname \$dldir/$dlname~ ++ chmod a+x \$dldir/$dlname' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ dlpath=$dir/\$dldll~ ++ $rm \$dlpath' ++ shlibpath_overrides_runpath=yes ++ ++ case $host_os in ++ cygwin*) ++ # Cygwin DLLs use 'cyg' prefix rather than 'lib' ++ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ++ ;; ++ mingw*) ++ # MinGW DLLs use traditional 'lib' prefix ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then ++ # It is most probably a Windows format PATH printed by ++ # mingw gcc, but we are running on Cygwin. Gcc prints its search ++ # path with ; separators, and with drive letters. We can handle the ++ # drive letters (cygwin fileutils understands them), so leave them, ++ # especially as we might pass files found there to a mingw objdump, ++ # which wouldn't understand a cygwinified path. Ahh. ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ ;; ++ pw32*) ++ # pw32 DLLs use 'pw' prefix rather than 'lib' ++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ ;; ++ esac ++ ;; ++ ++ *) ++ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' ++ ;; ++ esac ++ dynamic_linker='Win32 ld.exe' ++ # FIXME: first we should search . and the directory the executable is in ++ shlibpath_var=PATH ++ ;; ++ ++darwin* | rhapsody*) ++ dynamic_linker="$host_os dyld" ++ version_type=darwin ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' ++ soname_spec='${libname}${release}${major}$shared_ext' ++ shlibpath_overrides_runpath=yes ++ shlibpath_var=DYLD_LIBRARY_PATH ++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' ++ # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. ++ if test "$GCC" = yes; then ++ sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` ++ else ++ sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' ++ fi ++ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' ++ ;; ++ ++dgux*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; ++ ++freebsd1*) ++ dynamic_linker=no ++ ;; ++ ++freebsd* | dragonfly*) ++ # DragonFly does not have aout. When/if they implement a new ++ # versioning mechanism, adjust this. ++ if test -x /usr/bin/objformat; then ++ objformat=`/usr/bin/objformat` ++ else ++ case $host_os in ++ freebsd[123]*) objformat=aout ;; ++ *) objformat=elf ;; ++ esac ++ fi ++ version_type=freebsd-$objformat ++ case $version_type in ++ freebsd-elf*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ need_version=no ++ need_lib_prefix=no ++ ;; ++ freebsd-*) ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' ++ need_version=yes ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_os in ++ freebsd2*) ++ shlibpath_overrides_runpath=yes ++ ;; ++ freebsd3.[01]* | freebsdelf3.[01]*) ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ ++ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ freebsd*) # from 4.6 on ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ esac ++ ;; ++ ++gnu*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ ;; ++ ++hpux9* | hpux10* | hpux11*) ++ # Give a soname corresponding to the major version so that dld.sl refuses to ++ # link against other versions. ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ case $host_cpu in ++ ia64*) ++ shrext_cmds='.so' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.so" ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ if test "X$HPUX_IA64_MODE" = X32; then ++ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" ++ else ++ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" ++ fi ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ hppa*64*) ++ shrext_cmds='.sl' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ *) ++ shrext_cmds='.sl' ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=SHLIB_PATH ++ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ esac ++ # HP-UX runs *really* slowly unless shared libraries are mode 555. ++ postinstall_cmds='chmod 555 $lib' ++ ;; ++ ++interix3*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ ++irix5* | irix6* | nonstopux*) ++ case $host_os in ++ nonstopux*) version_type=nonstopux ;; ++ *) ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ version_type=linux ++ else ++ version_type=irix ++ fi ;; ++ esac ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' ++ case $host_os in ++ irix5* | nonstopux*) ++ libsuff= shlibsuff= ++ ;; ++ *) ++ case $LD in # libtool.m4 will add one of these switches to LD ++ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") ++ libsuff= shlibsuff= libmagic=32-bit;; ++ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") ++ libsuff=32 shlibsuff=N32 libmagic=N32;; ++ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") ++ libsuff=64 shlibsuff=64 libmagic=64-bit;; ++ *) libsuff= shlibsuff= libmagic=never-match;; ++ esac ++ ;; ++ esac ++ shlibpath_var=LD_LIBRARY${shlibsuff}_PATH ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" ++ sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ++ hardcode_into_libs=yes ++ ;; ++ ++# No shared lib support for Linux oldld, aout, or coff. ++linux*oldld* | linux*aout* | linux*coff*) ++ dynamic_linker=no ++ ;; ++ ++# This must be Linux ELF. ++linux* | k*bsd*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ # This implies no fast_install, which is unacceptable. ++ # Some rework will be needed to allow for fast_install ++ # before this can be enabled. ++ hardcode_into_libs=yes ++ ++ # Append ld.so.conf contents to the search path ++ if test -f /etc/ld.so.conf; then ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" ++ fi ++ ++ # We used to test for /lib/ld.so.1 and disable shared libraries on ++ # powerpc, because MkLinux only supported shared libraries with the ++ # GNU dynamic linker. Since this was broken with cross compilers, ++ # most powerpc-linux boxes support dynamic linking these days and ++ # people can always --disable-shared, the test was removed, and we ++ # assume the GNU/Linux dynamic linker is in use. ++ dynamic_linker='GNU/Linux ld.so' ++ ;; ++ ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; ++ ++netbsd*) ++ version_type=sunos ++ need_lib_prefix=no ++ need_version=no ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ dynamic_linker='NetBSD (a.out) ld.so' ++ else ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='NetBSD ld.elf_so' ++ fi ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ ++newsos6) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; ++ ++nto-qnx*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; ++ ++openbsd*) ++ version_type=sunos ++ sys_lib_dlsearch_path_spec="/usr/lib" ++ need_lib_prefix=no ++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. ++ case $host_os in ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; ++ esac ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ case $host_os in ++ openbsd2.[89] | openbsd2.[89].*) ++ shlibpath_overrides_runpath=no ++ ;; ++ *) ++ shlibpath_overrides_runpath=yes ++ ;; ++ esac ++ else ++ shlibpath_overrides_runpath=yes ++ fi ++ ;; ++ ++os2*) ++ libname_spec='$name' ++ shrext_cmds=".dll" ++ need_lib_prefix=no ++ library_names_spec='$libname${shared_ext} $libname.a' ++ dynamic_linker='OS/2 ld.exe' ++ shlibpath_var=LIBPATH ++ ;; ++ ++osf3* | osf4* | osf5*) ++ version_type=osf ++ need_lib_prefix=no ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" ++ sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" ++ ;; ++ ++solaris*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ # ldd complains unless libraries are executable ++ postinstall_cmds='chmod +x $lib' ++ ;; ++ ++sunos4*) ++ version_type=sunos ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ if test "$with_gnu_ld" = yes; then ++ need_lib_prefix=no ++ fi ++ need_version=yes ++ ;; ++ ++sysv4 | sysv4.3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ case $host_vendor in ++ sni) ++ shlibpath_overrides_runpath=no ++ need_lib_prefix=no ++ export_dynamic_flag_spec='${wl}-Blargedynsym' ++ runpath_var=LD_RUN_PATH ++ ;; ++ siemens) ++ need_lib_prefix=no ++ ;; ++ motorola) ++ need_lib_prefix=no ++ need_version=no ++ shlibpath_overrides_runpath=no ++ sys_lib_search_path_spec='/lib /usr/lib /usr/ccs/lib' ++ ;; ++ esac ++ ;; ++ ++sysv4*MP*) ++ if test -d /usr/nec ;then ++ version_type=linux ++ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' ++ soname_spec='$libname${shared_ext}.$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ fi ++ ;; ++ ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ version_type=freebsd-elf ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ if test "$with_gnu_ld" = yes; then ++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' ++ shlibpath_overrides_runpath=no ++ else ++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' ++ shlibpath_overrides_runpath=yes ++ case $host_os in ++ sco3.2v5*) ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ++ ;; ++ esac ++ fi ++ sys_lib_dlsearch_path_spec='/usr/lib' ++ ;; ++ ++uts4*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ ;; ++ ++*) ++ dynamic_linker=no ++ ;; ++esac ++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6; } ++test "$dynamic_linker" = no && can_build_shared=no ++ ++variables_saved_for_relink="PATH $shlibpath_var $runpath_var" ++if test "$GCC" = yes; then ++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" ++fi ++ ++{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } ++hardcode_action_F77= ++if test -n "$hardcode_libdir_flag_spec_F77" || \ ++ test -n "$runpath_var_F77" || \ ++ test "X$hardcode_automatic_F77" = "Xyes" ; then ++ ++ # We can hardcode non-existant directories. ++ if test "$hardcode_direct_F77" != no && ++ # If the only mechanism to avoid hardcoding is shlibpath_var, we ++ # have to relink, otherwise we might link with an installed library ++ # when we should be linking with a yet-to-be-installed one ++ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, F77)" != no && ++ test "$hardcode_minus_L_F77" != no; then ++ # Linking always hardcodes the temporary library directory. ++ hardcode_action_F77=relink ++ else ++ # We can link without hardcoding, and we can hardcode nonexisting dirs. ++ hardcode_action_F77=immediate ++ fi ++else ++ # We cannot hardcode anything, or else we can only hardcode existing ++ # directories. ++ hardcode_action_F77=unsupported ++fi ++{ echo "$as_me:$LINENO: result: $hardcode_action_F77" >&5 ++echo "${ECHO_T}$hardcode_action_F77" >&6; } ++ ++if test "$hardcode_action_F77" = relink; then ++ # Fast installation is not supported ++ enable_fast_install=no ++elif test "$shlibpath_overrides_runpath" = yes || ++ test "$enable_shared" = no; then ++ # Fast installation is not necessary ++ enable_fast_install=needless ++fi ++ ++ ++# The else clause should only fire when bootstrapping the ++# libtool distribution, otherwise you forgot to ship ltmain.sh ++# with your package, and you will get complaints that there are ++# no rules to generate ltmain.sh. ++if test -f "$ltmain"; then ++ # See if we are running on zsh, and set the options which allow our commands through ++ # without removal of \ escapes. ++ if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++ fi ++ # Now quote all the things that may contain metacharacters while being ++ # careful not to overquote the AC_SUBSTed values. We take copies of the ++ # variables and quote the copies for generation of the libtool script. ++ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ ++ SED SHELL STRIP \ ++ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ ++ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ ++ deplibs_check_method reload_flag reload_cmds need_locks \ ++ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ ++ lt_cv_sys_global_symbol_to_c_name_address \ ++ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ ++ old_postinstall_cmds old_postuninstall_cmds \ ++ compiler_F77 \ ++ CC_F77 \ ++ LD_F77 \ ++ lt_prog_compiler_wl_F77 \ ++ lt_prog_compiler_pic_F77 \ ++ lt_prog_compiler_static_F77 \ ++ lt_prog_compiler_no_builtin_flag_F77 \ ++ export_dynamic_flag_spec_F77 \ ++ thread_safe_flag_spec_F77 \ ++ whole_archive_flag_spec_F77 \ ++ enable_shared_with_static_runtimes_F77 \ ++ old_archive_cmds_F77 \ ++ old_archive_from_new_cmds_F77 \ ++ predep_objects_F77 \ ++ postdep_objects_F77 \ ++ predeps_F77 \ ++ postdeps_F77 \ ++ compiler_lib_search_path_F77 \ ++ archive_cmds_F77 \ ++ archive_expsym_cmds_F77 \ ++ postinstall_cmds_F77 \ ++ postuninstall_cmds_F77 \ ++ old_archive_from_expsyms_cmds_F77 \ ++ allow_undefined_flag_F77 \ ++ no_undefined_flag_F77 \ ++ export_symbols_cmds_F77 \ ++ hardcode_libdir_flag_spec_F77 \ ++ hardcode_libdir_flag_spec_ld_F77 \ ++ hardcode_libdir_separator_F77 \ ++ hardcode_automatic_F77 \ ++ module_cmds_F77 \ ++ module_expsym_cmds_F77 \ ++ lt_cv_prog_compiler_c_o_F77 \ ++ exclude_expsyms_F77 \ ++ include_expsyms_F77; do ++ ++ case $var in ++ old_archive_cmds_F77 | \ ++ old_archive_from_new_cmds_F77 | \ ++ archive_cmds_F77 | \ ++ archive_expsym_cmds_F77 | \ ++ module_cmds_F77 | \ ++ module_expsym_cmds_F77 | \ ++ old_archive_from_expsyms_cmds_F77 | \ ++ export_symbols_cmds_F77 | \ ++ extract_expsyms_cmds | reload_cmds | finish_cmds | \ ++ postinstall_cmds | postuninstall_cmds | \ ++ old_postinstall_cmds | old_postuninstall_cmds | \ ++ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) ++ # Double-quote double-evaled strings. ++ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ++ ;; ++ *) ++ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ++ ;; ++ esac ++ done ++ ++ case $lt_echo in ++ *'\$0 --fallback-echo"') ++ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` ++ ;; ++ esac ++ ++cfgfile="$ofile" ++ ++ cat <<__EOF__ >> "$cfgfile" ++# ### BEGIN LIBTOOL TAG CONFIG: $tagname ++ ++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++ ++# Shell to use when invoking shell scripts. ++SHELL=$lt_SHELL ++ ++# Whether or not to build shared libraries. ++build_libtool_libs=$enable_shared ++ ++# Whether or not to build static libraries. ++build_old_libs=$enable_static ++ ++# Whether or not to add -lc for building shared libraries. ++build_libtool_need_lc=$archive_cmds_need_lc_F77 ++ ++# Whether or not to disallow shared libs when runtime libs are static ++allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_F77 ++ ++# Whether or not to optimize for fast installation. ++fast_install=$enable_fast_install ++ ++# The host system. ++host_alias=$host_alias ++host=$host ++host_os=$host_os ++ ++# The build system. ++build_alias=$build_alias ++build=$build ++build_os=$build_os ++ ++# An echo program that does not interpret backslashes. ++echo=$lt_echo ++ ++# The archiver. ++AR=$lt_AR ++AR_FLAGS=$lt_AR_FLAGS ++ ++# A C compiler. ++LTCC=$lt_LTCC ++ ++# LTCC compiler flags. ++LTCFLAGS=$lt_LTCFLAGS ++ ++# A language-specific compiler. ++CC=$lt_compiler_F77 ++ ++# Is the compiler the GNU C compiler? ++with_gcc=$GCC_F77 ++ ++# An ERE matcher. ++EGREP=$lt_EGREP ++ ++# The linker used to build libraries. ++LD=$lt_LD_F77 ++ ++# Whether we need hard or soft links. ++LN_S=$lt_LN_S ++ ++# A BSD-compatible nm program. ++NM=$lt_NM ++ ++# A symbol stripping program ++STRIP=$lt_STRIP ++ ++# Used to examine libraries when file_magic_cmd begins "file" ++MAGIC_CMD=$MAGIC_CMD ++ ++# Used on cygwin: DLL creation program. ++DLLTOOL="$DLLTOOL" ++ ++# Used on cygwin: object dumper. ++OBJDUMP="$OBJDUMP" ++ ++# Used on cygwin: assembler. ++AS="$AS" ++ ++# The name of the directory that contains temporary libtool files. ++objdir=$objdir ++ ++# How to create reloadable object files. ++reload_flag=$lt_reload_flag ++reload_cmds=$lt_reload_cmds ++ ++# How to pass a linker flag through the compiler. ++wl=$lt_lt_prog_compiler_wl_F77 ++ ++# Object file suffix (normally "o"). ++objext="$ac_objext" ++ ++# Old archive suffix (normally "a"). ++libext="$libext" ++ ++# Shared library suffix (normally ".so"). ++shrext_cmds='$shrext_cmds' ++ ++# Executable file suffix (normally ""). ++exeext="$exeext" ++ ++# Additional compiler flags for building library objects. ++pic_flag=$lt_lt_prog_compiler_pic_F77 ++pic_mode=$pic_mode ++ ++# What is the maximum length of a command? ++max_cmd_len=$lt_cv_sys_max_cmd_len ++ ++# Does compiler simultaneously support -c and -o options? ++compiler_c_o=$lt_lt_cv_prog_compiler_c_o_F77 ++ ++# Must we lock files when doing compilation? ++need_locks=$lt_need_locks ++ ++# Do we need the lib prefix for modules? ++need_lib_prefix=$need_lib_prefix ++ ++# Do we need a version for libraries? ++need_version=$need_version ++ ++# Whether dlopen is supported. ++dlopen_support=$enable_dlopen ++ ++# Whether dlopen of programs is supported. ++dlopen_self=$enable_dlopen_self ++ ++# Whether dlopen of statically linked programs is supported. ++dlopen_self_static=$enable_dlopen_self_static ++ ++# Compiler flag to prevent dynamic linking. ++link_static_flag=$lt_lt_prog_compiler_static_F77 ++ ++# Compiler flag to turn off builtin functions. ++no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_F77 ++ ++# Compiler flag to allow reflexive dlopens. ++export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_F77 ++ ++# Compiler flag to generate shared objects directly from archives. ++whole_archive_flag_spec=$lt_whole_archive_flag_spec_F77 ++ ++# Compiler flag to generate thread-safe objects. ++thread_safe_flag_spec=$lt_thread_safe_flag_spec_F77 ++ ++# Library versioning type. ++version_type=$version_type ++ ++# Format of library name prefix. ++libname_spec=$lt_libname_spec ++ ++# List of archive names. First name is the real one, the rest are links. ++# The last name is the one that the linker finds with -lNAME. ++library_names_spec=$lt_library_names_spec ++ ++# The coded name of the library, if different from the real name. ++soname_spec=$lt_soname_spec ++ ++# Commands used to build and install an old-style archive. ++RANLIB=$lt_RANLIB ++old_archive_cmds=$lt_old_archive_cmds_F77 ++old_postinstall_cmds=$lt_old_postinstall_cmds ++old_postuninstall_cmds=$lt_old_postuninstall_cmds ++ ++# Create an old-style archive from a shared archive. ++old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_F77 ++ ++# Create a temporary old-style archive to link instead of a shared archive. ++old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_F77 ++ ++# Commands used to build and install a shared archive. ++archive_cmds=$lt_archive_cmds_F77 ++archive_expsym_cmds=$lt_archive_expsym_cmds_F77 ++postinstall_cmds=$lt_postinstall_cmds ++postuninstall_cmds=$lt_postuninstall_cmds ++ ++# Commands used to build a loadable module (assumed same as above if empty) ++module_cmds=$lt_module_cmds_F77 ++module_expsym_cmds=$lt_module_expsym_cmds_F77 ++ ++# Commands to strip libraries. ++old_striplib=$lt_old_striplib ++striplib=$lt_striplib ++ ++# Dependencies to place before the objects being linked to create a ++# shared library. ++predep_objects=$lt_predep_objects_F77 ++ ++# Dependencies to place after the objects being linked to create a ++# shared library. ++postdep_objects=$lt_postdep_objects_F77 ++ ++# Dependencies to place before the objects being linked to create a ++# shared library. ++predeps=$lt_predeps_F77 ++ ++# Dependencies to place after the objects being linked to create a ++# shared library. ++postdeps=$lt_postdeps_F77 ++ ++# The library search path used internally by the compiler when linking ++# a shared library. ++compiler_lib_search_path=$lt_compiler_lib_search_path_F77 ++ ++# Method to check whether dependent libraries are shared objects. ++deplibs_check_method=$lt_deplibs_check_method ++ ++# Command to use when deplibs_check_method == file_magic. ++file_magic_cmd=$lt_file_magic_cmd ++ ++# Flag that allows shared libraries with undefined symbols to be built. ++allow_undefined_flag=$lt_allow_undefined_flag_F77 ++ ++# Flag that forces no undefined symbols. ++no_undefined_flag=$lt_no_undefined_flag_F77 ++ ++# Commands used to finish a libtool library installation in a directory. ++finish_cmds=$lt_finish_cmds ++ ++# Same as above, but a single script fragment to be evaled but not shown. ++finish_eval=$lt_finish_eval ++ ++# Take the output of nm and produce a listing of raw symbols and C names. ++global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe ++ ++# Transform the output of nm in a proper C declaration ++global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl ++ ++# Transform the output of nm in a C name address pair ++global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address ++ ++# This is the shared library runtime path variable. ++runpath_var=$runpath_var ++ ++# This is the shared library path variable. ++shlibpath_var=$shlibpath_var ++ ++# Is shlibpath searched before the hard-coded library search path? ++shlibpath_overrides_runpath=$shlibpath_overrides_runpath ++ ++# How to hardcode a shared library path into an executable. ++hardcode_action=$hardcode_action_F77 ++ ++# Whether we should hardcode library paths into libraries. ++hardcode_into_libs=$hardcode_into_libs ++ ++# Flag to hardcode \$libdir into a binary during linking. ++# This must work even if \$libdir does not exist. ++hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_F77 ++ ++# If ld is used when linking, flag to hardcode \$libdir into ++# a binary during linking. This must work even if \$libdir does ++# not exist. ++hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_F77 ++ ++# Whether we need a single -rpath flag with a separated argument. ++hardcode_libdir_separator=$lt_hardcode_libdir_separator_F77 ++ ++# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the ++# resulting binary. ++hardcode_direct=$hardcode_direct_F77 ++ ++# Set to yes if using the -LDIR flag during linking hardcodes DIR into the ++# resulting binary. ++hardcode_minus_L=$hardcode_minus_L_F77 ++ ++# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into ++# the resulting binary. ++hardcode_shlibpath_var=$hardcode_shlibpath_var_F77 ++ ++# Set to yes if building a shared library automatically hardcodes DIR into the library ++# and all subsequent libraries and executables linked against it. ++hardcode_automatic=$hardcode_automatic_F77 ++ ++# Variables whose values should be saved in libtool wrapper scripts and ++# restored at relink time. ++variables_saved_for_relink="$variables_saved_for_relink" ++ ++# Whether libtool must link a program against all its dependency libraries. ++link_all_deplibs=$link_all_deplibs_F77 ++ ++# Compile-time system search path for libraries ++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec ++ ++# Run-time system search path for libraries ++sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec ++ ++# Fix the shell variable \$srcfile for the compiler. ++fix_srcfile_path="$fix_srcfile_path_F77" ++ ++# Set to yes if exported symbols are required. ++always_export_symbols=$always_export_symbols_F77 ++ ++# The commands to list exported symbols. ++export_symbols_cmds=$lt_export_symbols_cmds_F77 ++ ++# The commands to extract the exported symbol list from a shared archive. ++extract_expsyms_cmds=$lt_extract_expsyms_cmds ++ ++# Symbols that should not be listed in the preloaded symbols. ++exclude_expsyms=$lt_exclude_expsyms_F77 ++ ++# Symbols that must always be exported. ++include_expsyms=$lt_include_expsyms_F77 ++ ++# ### END LIBTOOL TAG CONFIG: $tagname ++ ++__EOF__ ++ ++ ++else ++ # If there is no Makefile yet, we rely on a make rule to execute ++ # `config.status --recheck' to rerun these tests and create the ++ # libtool script then. ++ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` ++ if test -f "$ltmain_in"; then ++ test -f Makefile && make "$ltmain" ++ fi ++fi ++ ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++CC="$lt_save_CC" ++ ++ else ++ tagname="" ++ fi ++ ;; ++ ++ GCJ) ++ if test -n "$GCJ" && test "X$GCJ" != "Xno"; then ++ ++ ++# Source file extension for Java test sources. ++ac_ext=java ++ ++# Object file extension for compiled Java test sources. ++objext=o ++objext_GCJ=$objext ++ ++# Code to be used in simple compile tests ++lt_simple_compile_test_code="class foo {}\n" ++ ++# Code to be used in simple link tests ++lt_simple_link_test_code='public class conftest { public static void main(String[] argv) {}; }\n' ++ ++# ltmain only uses $CC for tagged configurations so make sure $CC is set. ++ ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} ++ ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} ++ ++# Allow CC to be a program name with arguments. ++compiler=$CC ++ ++ ++# save warnings/boilerplate of simple test code ++ac_outfile=conftest.$ac_objext ++printf "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$rm conftest* ++ ++ac_outfile=conftest.$ac_objext ++printf "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$rm conftest* ++ ++ ++# Allow CC to be a program name with arguments. ++lt_save_CC="$CC" ++CC=${GCJ-"gcj"} ++compiler=$CC ++compiler_GCJ=$CC ++for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++ ++ ++# GCJ did not exist at the time GCC didn't implicitly link libc in. ++archive_cmds_need_lc_GCJ=no ++ ++old_archive_cmds_GCJ=$old_archive_cmds ++ ++ ++lt_prog_compiler_no_builtin_flag_GCJ= ++ ++if test "$GCC" = yes; then ++ lt_prog_compiler_no_builtin_flag_GCJ=' -fno-builtin' ++ ++ ++{ echo "$as_me:$LINENO: checking if $compiler supports -fno-rtti -fno-exceptions" >&5 ++echo $ECHO_N "checking if $compiler supports -fno-rtti -fno-exceptions... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_rtti_exceptions+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_rtti_exceptions=no ++ ac_outfile=conftest.$ac_objext ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="-fno-rtti -fno-exceptions" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:16473: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&5 ++ echo "$as_me:16477: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_rtti_exceptions=yes ++ fi ++ fi ++ $rm conftest* ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_rtti_exceptions" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_rtti_exceptions" >&6; } ++ ++if test x"$lt_cv_prog_compiler_rtti_exceptions" = xyes; then ++ lt_prog_compiler_no_builtin_flag_GCJ="$lt_prog_compiler_no_builtin_flag_GCJ -fno-rtti -fno-exceptions" ++else ++ : ++fi ++ ++fi ++ ++lt_prog_compiler_wl_GCJ= ++lt_prog_compiler_pic_GCJ= ++lt_prog_compiler_static_GCJ= ++ ++{ echo "$as_me:$LINENO: checking for $compiler option to produce PIC" >&5 ++echo $ECHO_N "checking for $compiler option to produce PIC... $ECHO_C" >&6; } ++ ++ if test "$GCC" = yes; then ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ lt_prog_compiler_static_GCJ='-static' ++ ++ case $host_os in ++ aix*) ++ # All AIX code is PIC. ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static_GCJ='-Bstatic' ++ fi ++ ;; ++ ++ amigaos*) ++ # FIXME: we need at least 68020 code to build shared libraries, but ++ # adding the `-m68020' flag to GCC prevents building anything better, ++ # like `-m68040'. ++ lt_prog_compiler_pic_GCJ='-m68020 -resident32 -malways-restore-a4' ++ ;; ++ ++ beos* | cygwin* | irix5* | irix6* | nonstopux* | osf3* | osf4* | osf5*) ++ # PIC is the default for these OSes. ++ ;; ++ ++ mingw* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ lt_prog_compiler_pic_GCJ='-DDLL_EXPORT' ++ ;; ++ ++ darwin* | rhapsody*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ lt_prog_compiler_pic_GCJ='-fno-common' ++ ;; ++ ++ interix3*) ++ # Interix 3.x gcc -fpic/-fPIC options generate broken code. ++ # Instead, we relocate shared libraries at runtime. ++ ;; ++ ++ msdosdjgpp*) ++ # Just because we use GCC doesn't mean we suddenly get shared libraries ++ # on systems that don't support them. ++ lt_prog_compiler_can_build_shared_GCJ=no ++ enable_shared=no ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ lt_prog_compiler_pic_GCJ=-Kconform_pic ++ fi ++ ;; ++ ++ hpux*) ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ lt_prog_compiler_pic_GCJ='-fPIC' ++ ;; ++ esac ++ ;; ++ ++ *) ++ lt_prog_compiler_pic_GCJ='-fPIC' ++ ;; ++ esac ++ else ++ # PORTME Check for flag to pass linker flags through the system compiler. ++ case $host_os in ++ aix*) ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ if test "$host_cpu" = ia64; then ++ # AIX 5 now supports IA64 processor ++ lt_prog_compiler_static_GCJ='-Bstatic' ++ else ++ lt_prog_compiler_static_GCJ='-bnso -bI:/lib/syscalls.exp' ++ fi ++ ;; ++ darwin*) ++ # PIC is the default on this platform ++ # Common symbols not allowed in MH_DYLIB files ++ case $cc_basename in ++ xlc*) ++ lt_prog_compiler_pic_GCJ='-qnocommon' ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ ;; ++ esac ++ ;; ++ ++ mingw* | pw32* | os2*) ++ # This hack is so that the source file can tell whether it is being ++ # built for inclusion in a dll (and should export symbols for example). ++ lt_prog_compiler_pic_GCJ='-DDLL_EXPORT' ++ ;; ++ ++ hpux9* | hpux10* | hpux11*) ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ # PIC is the default for IA64 HP-UX and 64-bit HP-UX, but ++ # not for PA HP-UX. ++ case $host_cpu in ++ hppa*64*|ia64*) ++ # +Z the default ++ ;; ++ *) ++ lt_prog_compiler_pic_GCJ='+Z' ++ ;; ++ esac ++ # Is there a better lt_prog_compiler_static that works with the bundled CC? ++ lt_prog_compiler_static_GCJ='${wl}-a ${wl}archive' ++ ;; ++ ++ irix5* | irix6* | nonstopux*) ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ # PIC (with -KPIC) is the default. ++ lt_prog_compiler_static_GCJ='-non_shared' ++ ;; ++ ++ newsos6) ++ lt_prog_compiler_pic_GCJ='-KPIC' ++ lt_prog_compiler_static_GCJ='-Bstatic' ++ ;; ++ ++ linux* | k*bsd*-gnu) ++ case $cc_basename in ++ icc* | ecc*) ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ lt_prog_compiler_pic_GCJ='-KPIC' ++ lt_prog_compiler_static_GCJ='-static' ++ ;; ++ pgcc* | pgf77* | pgf90* | pgf95*) ++ # Portland Group compilers (*not* the Pentium gcc compiler, ++ # which looks to be a dead project) ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ lt_prog_compiler_pic_GCJ='-fpic' ++ lt_prog_compiler_static_GCJ='-Bstatic' ++ ;; ++ ccc*) ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ # All Alpha code is PIC. ++ lt_prog_compiler_static_GCJ='-non_shared' ++ ;; ++ esac ++ ;; ++ ++ osf3* | osf4* | osf5*) ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ # All OSF/1 code is PIC. ++ lt_prog_compiler_static_GCJ='-non_shared' ++ ;; ++ ++ solaris*) ++ lt_prog_compiler_pic_GCJ='-KPIC' ++ lt_prog_compiler_static_GCJ='-Bstatic' ++ case $cc_basename in ++ f77* | f90* | f95*) ++ lt_prog_compiler_wl_GCJ='-Qoption ld ';; ++ *) ++ lt_prog_compiler_wl_GCJ='-Wl,';; ++ esac ++ ;; ++ ++ sunos4*) ++ lt_prog_compiler_wl_GCJ='-Qoption ld ' ++ lt_prog_compiler_pic_GCJ='-PIC' ++ lt_prog_compiler_static_GCJ='-Bstatic' ++ ;; ++ ++ sysv4 | sysv4.2uw2* | sysv4.3*) ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ lt_prog_compiler_pic_GCJ='-KPIC' ++ lt_prog_compiler_static_GCJ='-Bstatic' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec ;then ++ lt_prog_compiler_pic_GCJ='-Kconform_pic' ++ lt_prog_compiler_static_GCJ='-Bstatic' ++ fi ++ ;; ++ ++ sysv5* | unixware* | sco3.2v5* | sco5v6* | OpenUNIX*) ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ lt_prog_compiler_pic_GCJ='-KPIC' ++ lt_prog_compiler_static_GCJ='-Bstatic' ++ ;; ++ ++ unicos*) ++ lt_prog_compiler_wl_GCJ='-Wl,' ++ lt_prog_compiler_can_build_shared_GCJ=no ++ ;; ++ ++ uts4*) ++ lt_prog_compiler_pic_GCJ='-pic' ++ lt_prog_compiler_static_GCJ='-Bstatic' ++ ;; ++ ++ *) ++ lt_prog_compiler_can_build_shared_GCJ=no ++ ;; ++ esac ++ fi ++ ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_GCJ" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_GCJ" >&6; } ++ ++# ++# Check to make sure the PIC flag actually works. ++# ++if test -n "$lt_prog_compiler_pic_GCJ"; then ++ ++{ echo "$as_me:$LINENO: checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works" >&5 ++echo $ECHO_N "checking if $compiler PIC flag $lt_prog_compiler_pic_GCJ works... $ECHO_C" >&6; } ++if test "${lt_prog_compiler_pic_works_GCJ+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_prog_compiler_pic_works_GCJ=no ++ ac_outfile=conftest.$ac_objext ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ lt_compiler_flag="$lt_prog_compiler_pic_GCJ" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ # The option is referenced via a variable to avoid confusing sed. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:16741: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>conftest.err) ++ ac_status=$? ++ cat conftest.err >&5 ++ echo "$as_me:16745: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s "$ac_outfile"; then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings other than the usual output. ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' >conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if test ! -s conftest.er2 || diff conftest.exp conftest.er2 >/dev/null; then ++ lt_prog_compiler_pic_works_GCJ=yes ++ fi ++ fi ++ $rm conftest* ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_pic_works_GCJ" >&5 ++echo "${ECHO_T}$lt_prog_compiler_pic_works_GCJ" >&6; } ++ ++if test x"$lt_prog_compiler_pic_works_GCJ" = xyes; then ++ case $lt_prog_compiler_pic_GCJ in ++ "" | " "*) ;; ++ *) lt_prog_compiler_pic_GCJ=" $lt_prog_compiler_pic_GCJ" ;; ++ esac ++else ++ lt_prog_compiler_pic_GCJ= ++ lt_prog_compiler_can_build_shared_GCJ=no ++fi ++ ++fi ++case $host_os in ++ # For platforms which do not support PIC, -DPIC is meaningless: ++ *djgpp*) ++ lt_prog_compiler_pic_GCJ= ++ ;; ++ *) ++ lt_prog_compiler_pic_GCJ="$lt_prog_compiler_pic_GCJ" ++ ;; ++esac ++ ++# ++# Check to make sure the static flag actually works. ++# ++wl=$lt_prog_compiler_wl_GCJ eval lt_tmp_static_flag=\"$lt_prog_compiler_static_GCJ\" ++{ echo "$as_me:$LINENO: checking if $compiler static flag $lt_tmp_static_flag works" >&5 ++echo $ECHO_N "checking if $compiler static flag $lt_tmp_static_flag works... $ECHO_C" >&6; } ++if test "${lt_prog_compiler_static_works_GCJ+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_prog_compiler_static_works_GCJ=no ++ save_LDFLAGS="$LDFLAGS" ++ LDFLAGS="$LDFLAGS $lt_tmp_static_flag" ++ printf "$lt_simple_link_test_code" > conftest.$ac_ext ++ if (eval $ac_link 2>conftest.err) && test -s conftest$ac_exeext; then ++ # The linker can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ if test -s conftest.err; then ++ # Append any errors to the config.log. ++ cat conftest.err 1>&5 ++ $echo "X$_lt_linker_boilerplate" | $Xsed -e '/^$/d' > conftest.exp ++ $SED '/^$/d; /^ *+/d' conftest.err >conftest.er2 ++ if diff conftest.exp conftest.er2 >/dev/null; then ++ lt_prog_compiler_static_works_GCJ=yes ++ fi ++ else ++ lt_prog_compiler_static_works_GCJ=yes ++ fi ++ fi ++ $rm conftest* ++ LDFLAGS="$save_LDFLAGS" ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_prog_compiler_static_works_GCJ" >&5 ++echo "${ECHO_T}$lt_prog_compiler_static_works_GCJ" >&6; } ++ ++if test x"$lt_prog_compiler_static_works_GCJ" = xyes; then ++ : ++else ++ lt_prog_compiler_static_GCJ= ++fi ++ ++ ++{ echo "$as_me:$LINENO: checking if $compiler supports -c -o file.$ac_objext" >&5 ++echo $ECHO_N "checking if $compiler supports -c -o file.$ac_objext... $ECHO_C" >&6; } ++if test "${lt_cv_prog_compiler_c_o_GCJ+set}" = set; then ++ echo $ECHO_N "(cached) $ECHO_C" >&6 ++else ++ lt_cv_prog_compiler_c_o_GCJ=no ++ $rm -r conftest 2>/dev/null ++ mkdir conftest ++ cd conftest ++ mkdir out ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ lt_compiler_flag="-o out/conftest2.$ac_objext" ++ # Insert the option either (1) after the last *FLAGS variable, or ++ # (2) before a word containing "conftest.", or (3) at the end. ++ # Note that $ac_compile itself does not contain backslashes and begins ++ # with a dollar sign (not a hyphen), so the echo should work correctly. ++ lt_compile=`echo "$ac_compile" | $SED \ ++ -e 's:.*FLAGS}\{0,1\} :&$lt_compiler_flag :; t' \ ++ -e 's: [^ ]*conftest\.: $lt_compiler_flag&:; t' \ ++ -e 's:$: $lt_compiler_flag:'` ++ (eval echo "\"\$as_me:16845: $lt_compile\"" >&5) ++ (eval "$lt_compile" 2>out/conftest.err) ++ ac_status=$? ++ cat out/conftest.err >&5 ++ echo "$as_me:16849: \$? = $ac_status" >&5 ++ if (exit $ac_status) && test -s out/conftest2.$ac_objext ++ then ++ # The compiler can only warn and ignore the option if not recognized ++ # So say no if there are warnings ++ $echo "X$_lt_compiler_boilerplate" | $Xsed -e '/^$/d' > out/conftest.exp ++ $SED '/^$/d; /^ *+/d' out/conftest.err >out/conftest.er2 ++ if test ! -s out/conftest.er2 || diff out/conftest.exp out/conftest.er2 >/dev/null; then ++ lt_cv_prog_compiler_c_o_GCJ=yes ++ fi ++ fi ++ chmod u+w . 2>&5 ++ $rm conftest* ++ # SGI C++ compiler will create directory out/ii_files/ for ++ # template instantiation ++ test -d out/ii_files && $rm out/ii_files/* && rmdir out/ii_files ++ $rm out/* && rmdir out ++ cd .. ++ rmdir conftest ++ $rm conftest* ++ ++fi ++{ echo "$as_me:$LINENO: result: $lt_cv_prog_compiler_c_o_GCJ" >&5 ++echo "${ECHO_T}$lt_cv_prog_compiler_c_o_GCJ" >&6; } ++ ++ ++hard_links="nottested" ++if test "$lt_cv_prog_compiler_c_o_GCJ" = no && test "$need_locks" != no; then ++ # do not overwrite the value of need_locks provided by the user ++ { echo "$as_me:$LINENO: checking if we can lock with hard links" >&5 ++echo $ECHO_N "checking if we can lock with hard links... $ECHO_C" >&6; } ++ hard_links=yes ++ $rm conftest* ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ touch conftest.a ++ ln conftest.a conftest.b 2>&5 || hard_links=no ++ ln conftest.a conftest.b 2>/dev/null && hard_links=no ++ { echo "$as_me:$LINENO: result: $hard_links" >&5 ++echo "${ECHO_T}$hard_links" >&6; } ++ if test "$hard_links" = no; then ++ { echo "$as_me:$LINENO: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&5 ++echo "$as_me: WARNING: \`$CC' does not support \`-c -o', so \`make -j' may be unsafe" >&2;} ++ need_locks=warn ++ fi ++else ++ need_locks=no ++fi ++ ++{ echo "$as_me:$LINENO: checking whether the $compiler linker ($LD) supports shared libraries" >&5 ++echo $ECHO_N "checking whether the $compiler linker ($LD) supports shared libraries... $ECHO_C" >&6; } ++ ++ runpath_var= ++ allow_undefined_flag_GCJ= ++ enable_shared_with_static_runtimes_GCJ=no ++ archive_cmds_GCJ= ++ archive_expsym_cmds_GCJ= ++ old_archive_From_new_cmds_GCJ= ++ old_archive_from_expsyms_cmds_GCJ= ++ export_dynamic_flag_spec_GCJ= ++ whole_archive_flag_spec_GCJ= ++ thread_safe_flag_spec_GCJ= ++ hardcode_libdir_flag_spec_GCJ= ++ hardcode_libdir_flag_spec_ld_GCJ= ++ hardcode_libdir_separator_GCJ= ++ hardcode_direct_GCJ=no ++ hardcode_minus_L_GCJ=no ++ hardcode_shlibpath_var_GCJ=unsupported ++ link_all_deplibs_GCJ=unknown ++ hardcode_automatic_GCJ=no ++ module_cmds_GCJ= ++ module_expsym_cmds_GCJ= ++ always_export_symbols_GCJ=no ++ export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED '\''s/.* //'\'' | sort | uniq > $export_symbols' ++ # include_expsyms should be a list of space-separated symbols to be *always* ++ # included in the symbol list ++ include_expsyms_GCJ= ++ # exclude_expsyms can be an extended regexp of symbols to exclude ++ # it will be wrapped by ` (' and `)$', so one must not match beginning or ++ # end of line. Example: `a|bc|.*d.*' will exclude the symbols `a' and `bc', ++ # as well as any symbol that contains `d'. ++ exclude_expsyms_GCJ="_GLOBAL_OFFSET_TABLE_" ++ # Although _GLOBAL_OFFSET_TABLE_ is a valid symbol C name, most a.out ++ # platforms (ab)use it in PIC code, but their linkers get confused if ++ # the symbol is explicitly referenced. Since portable code cannot ++ # rely on this symbol name, it's probably fine to never include it in ++ # preloaded symbol tables. ++ extract_expsyms_cmds= ++ # Just being paranoid about ensuring that cc_basename is set. ++ for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; ++ esac ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` ++ ++ case $host_os in ++ cygwin* | mingw* | pw32*) ++ # FIXME: the MSVC++ port hasn't been tested in a loooong time ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ if test "$GCC" != yes; then ++ with_gnu_ld=no ++ fi ++ ;; ++ interix*) ++ # we just hope/assume this is gcc and not c89 (= MSVC++) ++ with_gnu_ld=yes ++ ;; ++ openbsd*) ++ with_gnu_ld=no ++ ;; ++ esac ++ ++ ld_shlibs_GCJ=yes ++ if test "$with_gnu_ld" = yes; then ++ # If archive_cmds runs LD, not CC, wlarc should be empty ++ wlarc='${wl}' ++ ++ # Set some defaults for GNU ld with shared library support. These ++ # are reset later if shared libraries are not supported. Putting them ++ # here allows them to be overridden if necessary. ++ runpath_var=LD_RUN_PATH ++ hardcode_libdir_flag_spec_GCJ='${wl}--rpath ${wl}$libdir' ++ export_dynamic_flag_spec_GCJ='${wl}--export-dynamic' ++ # ancient GNU ld didn't support --whole-archive et. al. ++ if $LD --help 2>&1 | grep 'no-whole-archive' > /dev/null; then ++ whole_archive_flag_spec_GCJ="$wlarc"'--whole-archive$convenience '"$wlarc"'--no-whole-archive' ++ else ++ whole_archive_flag_spec_GCJ= ++ fi ++ supports_anon_versioning=no ++ case `$LD -v 2>/dev/null` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.10.*) ;; # catch versions < 2.11 ++ *\ 2.11.93.0.2\ *) supports_anon_versioning=yes ;; # RH7.3 ... ++ *\ 2.11.92.0.12\ *) supports_anon_versioning=yes ;; # Mandrake 8.2 ... ++ *\ 2.11.*) ;; # other 2.11 versions ++ *) supports_anon_versioning=yes ;; ++ esac ++ ++ # See if GNU ld supports shared libraries. ++ case $host_os in ++ aix3* | aix4* | aix5*) ++ # On AIX/PPC, the GNU linker is very broken ++ if test "$host_cpu" != ia64; then ++ ld_shlibs_GCJ=no ++ cat <&2 ++ ++*** Warning: the GNU linker, at least up to release 2.9.1, is reported ++*** to be unable to reliably create shared libraries on AIX. ++*** Therefore, libtool is disabling shared libraries support. If you ++*** really care for shared libraries, you may want to modify your PATH ++*** so that a non-GNU linker is found, and then restart. ++ ++EOF ++ fi ++ ;; ++ ++ amigaos*) ++ archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ hardcode_libdir_flag_spec_GCJ='-L$libdir' ++ hardcode_minus_L_GCJ=yes ++ ++ # Samuel A. Falvo II reports ++ # that the semantics of dynamic libraries on AmigaOS, at least up ++ # to version 4, is to share data among multiple programs linked ++ # with the same dynamic library. Since this doesn't match the ++ # behavior of shared libraries on other platforms, we can't use ++ # them. ++ ld_shlibs_GCJ=no ++ ;; ++ ++ beos*) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ allow_undefined_flag_GCJ=unsupported ++ # Joseph Beckenbach says some releases of gcc ++ # support --undefined. This deserves some investigation. FIXME ++ archive_cmds_GCJ='$CC -nostart $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ else ++ ld_shlibs_GCJ=no ++ fi ++ ;; ++ ++ cygwin* | mingw* | pw32*) ++ # _LT_AC_TAGVAR(hardcode_libdir_flag_spec, GCJ) is actually meaningless, ++ # as there is no search path for DLLs. ++ hardcode_libdir_flag_spec_GCJ='-L$libdir' ++ allow_undefined_flag_GCJ=unsupported ++ always_export_symbols_GCJ=no ++ enable_shared_with_static_runtimes_GCJ=yes ++ export_symbols_cmds_GCJ='$NM $libobjs $convenience | $global_symbol_pipe | $SED -e '\''/^[BCDGRS] /s/.* \([^ ]*\)/\1 DATA/'\'' | $SED -e '\''/^[AITW] /s/.* //'\'' | sort | uniq > $export_symbols' ++ ++ if $LD --help 2>&1 | grep 'auto-import' > /dev/null; then ++ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ # If the export-symbols file already is a .def file (1st line ++ # is EXPORTS), use it as is; otherwise, prepend... ++ archive_expsym_cmds_GCJ='if test "x`$SED 1q $export_symbols`" = xEXPORTS; then ++ cp $export_symbols $output_objdir/$soname.def; ++ else ++ echo EXPORTS > $output_objdir/$soname.def; ++ cat $export_symbols >> $output_objdir/$soname.def; ++ fi~ ++ $CC -shared $output_objdir/$soname.def $libobjs $deplibs $compiler_flags -o $output_objdir/$soname ${wl}--enable-auto-image-base -Xlinker --out-implib -Xlinker $lib' ++ else ++ ld_shlibs_GCJ=no ++ fi ++ ;; ++ ++ interix3*) ++ hardcode_direct_GCJ=no ++ hardcode_shlibpath_var_GCJ=no ++ hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec_GCJ='${wl}-E' ++ # Hack: On Interix 3.x, we cannot compile PIC because of a broken gcc. ++ # Instead, shared libraries are loaded at an image base (0x10000000 by ++ # default) and relocated if they conflict, which is a slow very memory ++ # consuming and fragmenting process. To avoid this, we pick a random, ++ # 256 KiB-aligned image base between 0x50000000 and 0x6FFC0000 at link ++ # time. Moving up from 0x10000000 also allows more sbrk(2) space. ++ archive_cmds_GCJ='$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ archive_expsym_cmds_GCJ='sed "s,^,_," $export_symbols >$output_objdir/$soname.expsym~$CC -shared $pic_flag $libobjs $deplibs $compiler_flags ${wl}-h,$soname ${wl}--retain-symbols-file,$output_objdir/$soname.expsym ${wl}--image-base,`expr ${RANDOM-$$} % 4096 / 2 \* 262144 + 1342177280` -o $lib' ++ ;; ++ ++ linux* | k*bsd*-gnu) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ tmp_addflag= ++ case $cc_basename,$host_cpu in ++ pgcc*) # Portland Group C compiler ++ whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag' ++ ;; ++ pgf77* | pgf90* | pgf95*) # Portland Group f77 and f90 compilers ++ whole_archive_flag_spec_GCJ='${wl}--whole-archive`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}--no-whole-archive' ++ tmp_addflag=' $pic_flag -Mnomain' ;; ++ ecc*,ia64* | icc*,ia64*) # Intel C compiler on ia64 ++ tmp_addflag=' -i_dynamic' ;; ++ efc*,ia64* | ifort*,ia64*) # Intel Fortran compiler on ia64 ++ tmp_addflag=' -i_dynamic -nofor_main' ;; ++ ifc* | ifort*) # Intel Fortran compiler ++ tmp_addflag=' -nofor_main' ;; ++ esac ++ archive_cmds_GCJ='$CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ ++ if test $supports_anon_versioning = yes; then ++ archive_expsym_cmds_GCJ='$echo "{ global:" > $output_objdir/$libname.ver~ ++ cat $export_symbols | sed -e "s/\(.*\)/\1;/" >> $output_objdir/$libname.ver~ ++ $echo "local: *; };" >> $output_objdir/$libname.ver~ ++ $CC -shared'"$tmp_addflag"' $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-version-script ${wl}$output_objdir/$libname.ver -o $lib' ++ fi ++ link_all_deplibs_GCJ=no ++ else ++ ld_shlibs_GCJ=no ++ fi ++ ;; ++ ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ archive_cmds_GCJ='$LD -Bshareable $libobjs $deplibs $linker_flags -o $lib' ++ wlarc= ++ else ++ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ fi ++ ;; ++ ++ solaris*) ++ if $LD -v 2>&1 | grep 'BFD 2\.8' > /dev/null; then ++ ld_shlibs_GCJ=no ++ cat <&2 ++ ++*** Warning: The releases 2.8.* of the GNU linker cannot reliably ++*** create shared libraries on Solaris systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.9.1 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++EOF ++ elif $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs_GCJ=no ++ fi ++ ;; ++ ++ sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX*) ++ case `$LD -v 2>&1` in ++ *\ [01].* | *\ 2.[0-9].* | *\ 2.1[0-5].*) ++ ld_shlibs_GCJ=no ++ cat <<_LT_EOF 1>&2 ++ ++*** Warning: Releases of the GNU linker prior to 2.16.91.0.3 can not ++*** reliably create shared libraries on SCO systems. Therefore, libtool ++*** is disabling shared libraries support. We urge you to upgrade GNU ++*** binutils to release 2.16.91.0.3 or newer. Another option is to modify ++*** your PATH or compiler configuration so that the native linker is ++*** used, and then restart. ++ ++_LT_EOF ++ ;; ++ *) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-rpath,$libdir`' ++ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib' ++ archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname,\${SCOABSPATH:+${install_libdir}/}$soname,-retain-symbols-file,$export_symbols -o $lib' ++ else ++ ld_shlibs_GCJ=no ++ fi ++ ;; ++ esac ++ ;; ++ ++ sunos4*) ++ archive_cmds_GCJ='$LD -assert pure-text -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ wlarc= ++ hardcode_direct_GCJ=yes ++ hardcode_shlibpath_var_GCJ=no ++ ;; ++ ++ *) ++ if $LD --help 2>&1 | grep ': supported targets:.* elf' > /dev/null; then ++ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname -o $lib' ++ archive_expsym_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname $wl$soname ${wl}-retain-symbols-file $wl$export_symbols -o $lib' ++ else ++ ld_shlibs_GCJ=no ++ fi ++ ;; ++ esac ++ ++ if test "$ld_shlibs_GCJ" = no; then ++ runpath_var= ++ hardcode_libdir_flag_spec_GCJ= ++ export_dynamic_flag_spec_GCJ= ++ whole_archive_flag_spec_GCJ= ++ fi ++ else ++ # PORTME fill in a description of your system's linker (not GNU ld) ++ case $host_os in ++ aix3*) ++ allow_undefined_flag_GCJ=unsupported ++ always_export_symbols_GCJ=yes ++ archive_expsym_cmds_GCJ='$LD -o $output_objdir/$soname $libobjs $deplibs $linker_flags -bE:$export_symbols -T512 -H512 -bM:SRE~$AR $AR_FLAGS $lib $output_objdir/$soname' ++ # Note: this linker hardcodes the directories in LIBPATH if there ++ # are no directories specified by -L. ++ hardcode_minus_L_GCJ=yes ++ if test "$GCC" = yes && test -z "$lt_prog_compiler_static"; then ++ # Neither direct hardcoding nor static linking is supported with a ++ # broken collect2. ++ hardcode_direct_GCJ=unsupported ++ fi ++ ;; ++ ++ aix4* | aix5*) ++ if test "$host_cpu" = ia64; then ++ # On IA64, the linker does run time linking by default, so we don't ++ # have to do anything special. ++ aix_use_runtimelinking=no ++ exp_sym_flag='-Bexport' ++ no_entry_flag="" ++ else ++ # If we're using GNU nm, then we don't want the "-C" option. ++ # -C means demangle to AIX nm, but means don't demangle with GNU nm ++ if $NM -V 2>&1 | grep 'GNU' > /dev/null; then ++ export_symbols_cmds_GCJ='$NM -Bpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' ++ else ++ export_symbols_cmds_GCJ='$NM -BCpg $libobjs $convenience | awk '\''{ if (((\$2 == "T") || (\$2 == "D") || (\$2 == "B")) && (substr(\$3,1,1) != ".")) { print \$3 } }'\'' | sort -u > $export_symbols' ++ fi ++ aix_use_runtimelinking=no ++ ++ # Test if we are trying to use run time linking or normal ++ # AIX style linking. If -brtl is somewhere in LDFLAGS, we ++ # need to do runtime linking. ++ case $host_os in aix4.[23]|aix4.[23].*|aix5*) ++ for ld_flag in $LDFLAGS; do ++ if (test $ld_flag = "-brtl" || test $ld_flag = "-Wl,-brtl"); then ++ aix_use_runtimelinking=yes ++ break ++ fi ++ done ++ ;; ++ esac ++ ++ exp_sym_flag='-bexport' ++ no_entry_flag='-bnoentry' ++ fi ++ ++ # When large executables or shared objects are built, AIX ld can ++ # have problems creating the table of contents. If linking a library ++ # or program results in "error TOC overflow" add -mminimal-toc to ++ # CXXFLAGS/CFLAGS for g++/gcc. In the cases where that is not ++ # enough to fix the problem, add -Wl,-bbigtoc to LDFLAGS. ++ ++ archive_cmds_GCJ='' ++ hardcode_direct_GCJ=yes ++ hardcode_libdir_separator_GCJ=':' ++ link_all_deplibs_GCJ=yes ++ ++ if test "$GCC" = yes; then ++ case $host_os in aix4.[012]|aix4.[012].*) ++ # We only want to do this on AIX 4.2 and lower, the check ++ # below for broken collect2 doesn't work under 4.3+ ++ collect2name=`${CC} -print-prog-name=collect2` ++ if test -f "$collect2name" && \ ++ strings "$collect2name" | grep resolve_lib_name >/dev/null ++ then ++ # We have reworked collect2 ++ hardcode_direct_GCJ=yes ++ else ++ # We have old collect2 ++ hardcode_direct_GCJ=unsupported ++ # It fails to find uninstalled libraries when the uninstalled ++ # path is not listed in the libpath. Setting hardcode_minus_L ++ # to unsupported forces relinking ++ hardcode_minus_L_GCJ=yes ++ hardcode_libdir_flag_spec_GCJ='-L$libdir' ++ hardcode_libdir_separator_GCJ= ++ fi ++ ;; ++ esac ++ shared_flag='-shared' ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag="$shared_flag "'${wl}-G' ++ fi ++ else ++ # not using gcc ++ if test "$host_cpu" = ia64; then ++ # VisualAge C++, Version 5.5 for AIX 5L for IA-64, Beta 3 Release ++ # chokes on -Wl,-G. The following line is correct: ++ shared_flag='-G' ++ else ++ if test "$aix_use_runtimelinking" = yes; then ++ shared_flag='${wl}-G' ++ else ++ shared_flag='${wl}-bM:SRE' ++ fi ++ fi ++ fi ++ ++ # It seems that -bexpall does not export symbols beginning with ++ # underscore (_), so it is better to generate a list of symbols to export. ++ always_export_symbols_GCJ=yes ++ if test "$aix_use_runtimelinking" = yes; then ++ # Warning - without using the other runtime loading flags (-brtl), ++ # -berok will link without error, but may produce a broken library. ++ allow_undefined_flag_GCJ='-berok' ++ # Determine the default libpath from the value encoded in an empty executable. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'`; fi ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ ++ hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" ++ archive_expsym_cmds_GCJ="\$CC"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags `if test "x${allow_undefined_flag}" != "x"; then echo "${wl}${allow_undefined_flag}"; else :; fi` '"\${wl}$exp_sym_flag:\$export_symbols $shared_flag" ++ else ++ if test "$host_cpu" = ia64; then ++ hardcode_libdir_flag_spec_GCJ='${wl}-R $libdir:/usr/lib:/lib' ++ allow_undefined_flag_GCJ="-z nodefs" ++ archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs '"\${wl}$no_entry_flag"' $compiler_flags ${wl}${allow_undefined_flag} '"\${wl}$exp_sym_flag:\$export_symbols" ++ else ++ # Determine the default libpath from the value encoded in an empty executable. ++ cat >conftest.$ac_ext <<_ACEOF ++/* confdefs.h. */ ++_ACEOF ++cat confdefs.h >>conftest.$ac_ext ++cat >>conftest.$ac_ext <<_ACEOF ++/* end confdefs.h. */ ++ ++int ++main () ++{ ++ ++ ; ++ return 0; ++} ++_ACEOF ++rm -f conftest.$ac_objext conftest$ac_exeext ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 ++ ac_status=$? ++ grep -v '^ *+' conftest.er1 >conftest.err ++ rm -f conftest.er1 ++ cat conftest.err >&5 ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then ++ ++aix_libpath=`dump -H conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'` ++# Check for a 64-bit object if we didn't find anything. ++if test -z "$aix_libpath"; then aix_libpath=`dump -HX64 conftest$ac_exeext 2>/dev/null | $SED -n -e '/Import File Strings/,/^$/ { /^0/ { s/^0 *\(.*\)$/\1/; p; } ++}'`; fi ++else ++ echo "$as_me: failed program was:" >&5 ++sed 's/^/| /' conftest.$ac_ext >&5 ++ ++ ++fi ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ ++ conftest$ac_exeext conftest.$ac_ext ++if test -z "$aix_libpath"; then aix_libpath="/usr/lib:/lib"; fi ++ ++ hardcode_libdir_flag_spec_GCJ='${wl}-blibpath:$libdir:'"$aix_libpath" ++ # Warning - without using the other run time loading flags, ++ # -berok will link without error, but may produce a broken library. ++ no_undefined_flag_GCJ=' ${wl}-bernotok' ++ allow_undefined_flag_GCJ=' ${wl}-berok' ++ # Exported symbols can be pulled into shared objects from archives ++ whole_archive_flag_spec_GCJ='$convenience' ++ archive_cmds_need_lc_GCJ=yes ++ # This is similar to how AIX traditionally builds its shared libraries. ++ archive_expsym_cmds_GCJ="\$CC $shared_flag"' -o $output_objdir/$soname $libobjs $deplibs ${wl}-bnoentry $compiler_flags ${wl}-bE:$export_symbols${allow_undefined_flag}~$AR $AR_FLAGS $output_objdir/$libname$release.a $output_objdir/$soname' ++ fi ++ fi ++ ;; ++ ++ amigaos*) ++ archive_cmds_GCJ='$rm $output_objdir/a2ixlibrary.data~$echo "#define NAME $libname" > $output_objdir/a2ixlibrary.data~$echo "#define LIBRARY_ID 1" >> $output_objdir/a2ixlibrary.data~$echo "#define VERSION $major" >> $output_objdir/a2ixlibrary.data~$echo "#define REVISION $revision" >> $output_objdir/a2ixlibrary.data~$AR $AR_FLAGS $lib $libobjs~$RANLIB $lib~(cd $output_objdir && a2ixlibrary -32)' ++ hardcode_libdir_flag_spec_GCJ='-L$libdir' ++ hardcode_minus_L_GCJ=yes ++ # see comment about different semantics on the GNU ld section ++ ld_shlibs_GCJ=no ++ ;; ++ ++ bsdi[45]*) ++ export_dynamic_flag_spec_GCJ=-rdynamic ++ ;; ++ ++ cygwin* | mingw* | pw32*) ++ # When not using gcc, we currently assume that we are using ++ # Microsoft Visual C++. ++ # hardcode_libdir_flag_spec is actually meaningless, as there is ++ # no search path for DLLs. ++ hardcode_libdir_flag_spec_GCJ=' ' ++ allow_undefined_flag_GCJ=unsupported ++ # Tell ltmain to make .lib files, not .a files. ++ libext=lib ++ # Tell ltmain to make .dll files, not .so files. ++ shrext_cmds=".dll" ++ # FIXME: Setting linknames here is a bad hack. ++ archive_cmds_GCJ='$CC -o $lib $libobjs $compiler_flags `echo "$deplibs" | $SED -e '\''s/ -lc$//'\''` -link -dll~linknames=' ++ # The linker will automatically build a .lib file if we build a DLL. ++ old_archive_From_new_cmds_GCJ='true' ++ # FIXME: Should let the user specify the lib program. ++ old_archive_cmds_GCJ='lib /OUT:$oldlib$oldobjs$old_deplibs' ++ fix_srcfile_path_GCJ='`cygpath -w "$srcfile"`' ++ enable_shared_with_static_runtimes_GCJ=yes ++ ;; ++ ++ darwin* | rhapsody*) ++ case $host_os in ++ rhapsody* | darwin1.[012]) ++ allow_undefined_flag_GCJ='${wl}-undefined ${wl}suppress' ++ ;; ++ *) # Darwin 1.3 on ++ if test -z ${MACOSX_DEPLOYMENT_TARGET} ; then ++ allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ else ++ case ${MACOSX_DEPLOYMENT_TARGET} in ++ 10.[012]) ++ allow_undefined_flag_GCJ='${wl}-flat_namespace ${wl}-undefined ${wl}suppress' ++ ;; ++ 10.*) ++ allow_undefined_flag_GCJ='${wl}-undefined ${wl}dynamic_lookup' ++ ;; ++ esac ++ fi ++ ;; ++ esac ++ archive_cmds_need_lc_GCJ=no ++ hardcode_direct_GCJ=no ++ hardcode_automatic_GCJ=yes ++ hardcode_shlibpath_var_GCJ=unsupported ++ whole_archive_flag_spec_GCJ='' ++ link_all_deplibs_GCJ=yes ++ if test "$GCC" = yes ; then ++ output_verbose_link_cmd='echo' ++ archive_cmds_GCJ='$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring' ++ module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -dynamiclib $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags -install_name $rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ else ++ case $cc_basename in ++ xlc*) ++ output_verbose_link_cmd='echo' ++ archive_cmds_GCJ='$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}`echo $rpath/$soname` $verstring' ++ module_cmds_GCJ='$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags' ++ # Don't fix this by using the ld -exported_symbols_list flag, it doesn't exist in older darwin lds ++ archive_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC -qmkshrobj $allow_undefined_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-install_name ${wl}$rpath/$soname $verstring~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ module_expsym_cmds_GCJ='sed -e "s,#.*,," -e "s,^[ ]*,," -e "s,^\(..*\),_&," < $export_symbols > $output_objdir/${libname}-symbols.expsym~$CC $allow_undefined_flag -o $lib -bundle $libobjs $deplibs$compiler_flags~nmedit -s $output_objdir/${libname}-symbols.expsym ${lib}' ++ ;; ++ *) ++ ld_shlibs_GCJ=no ++ ;; ++ esac ++ fi ++ ;; ++ ++ dgux*) ++ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec_GCJ='-L$libdir' ++ hardcode_shlibpath_var_GCJ=no ++ ;; ++ ++ freebsd1*) ++ ld_shlibs_GCJ=no ++ ;; ++ ++ # FreeBSD 2.2.[012] allows us to include c++rt0.o to get C++ constructor ++ # support. Future versions do this automatically, but an explicit c++rt0.o ++ # does not break anything, and helps significantly (at the cost of a little ++ # extra space). ++ freebsd2.2*) ++ archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags /usr/lib/c++rt0.o' ++ hardcode_libdir_flag_spec_GCJ='-R$libdir' ++ hardcode_direct_GCJ=yes ++ hardcode_shlibpath_var_GCJ=no ++ ;; ++ ++ # Unfortunately, older versions of FreeBSD 2 do not have this feature. ++ freebsd2*) ++ archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct_GCJ=yes ++ hardcode_minus_L_GCJ=yes ++ hardcode_shlibpath_var_GCJ=no ++ ;; ++ ++ # FreeBSD 3 and greater uses gcc -shared to do shared libraries. ++ freebsd* | dragonfly*) ++ archive_cmds_GCJ='$CC -shared -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec_GCJ='-R$libdir' ++ hardcode_direct_GCJ=yes ++ hardcode_shlibpath_var_GCJ=no ++ ;; ++ ++ hpux9*) ++ if test "$GCC" = yes; then ++ archive_cmds_GCJ='$rm $output_objdir/$soname~$CC -shared -fPIC ${wl}+b ${wl}$install_libdir -o $output_objdir/$soname $libobjs $deplibs $compiler_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ else ++ archive_cmds_GCJ='$rm $output_objdir/$soname~$LD -b +b $install_libdir -o $output_objdir/$soname $libobjs $deplibs $linker_flags~test $output_objdir/$soname = $lib || mv $output_objdir/$soname $lib' ++ fi ++ hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator_GCJ=: ++ hardcode_direct_GCJ=yes ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L_GCJ=yes ++ export_dynamic_flag_spec_GCJ='${wl}-E' ++ ;; ++ ++ hpux10*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds_GCJ='$LD -b +h $soname +b $install_libdir -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator_GCJ=: ++ ++ hardcode_direct_GCJ=yes ++ export_dynamic_flag_spec_GCJ='${wl}-E' ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L_GCJ=yes ++ fi ++ ;; ++ ++ hpux11*) ++ if test "$GCC" = yes -a "$with_gnu_ld" = no; then ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds_GCJ='$CC -shared ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds_GCJ='$CC -shared -fPIC ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ else ++ case $host_cpu in ++ hppa*64*) ++ archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ ia64*) ++ archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+nodefaultrpath -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ *) ++ archive_cmds_GCJ='$CC -b ${wl}+h ${wl}$soname ${wl}+b ${wl}$install_libdir -o $lib $libobjs $deplibs $compiler_flags' ++ ;; ++ esac ++ fi ++ if test "$with_gnu_ld" = no; then ++ hardcode_libdir_flag_spec_GCJ='${wl}+b ${wl}$libdir' ++ hardcode_libdir_separator_GCJ=: ++ ++ case $host_cpu in ++ hppa*64*|ia64*) ++ hardcode_libdir_flag_spec_ld_GCJ='+b $libdir' ++ hardcode_direct_GCJ=no ++ hardcode_shlibpath_var_GCJ=no ++ ;; ++ *) ++ hardcode_direct_GCJ=yes ++ export_dynamic_flag_spec_GCJ='${wl}-E' ++ ++ # hardcode_minus_L: Not really in the search PATH, ++ # but as the default location of the library. ++ hardcode_minus_L_GCJ=yes ++ ;; ++ esac ++ fi ++ ;; ++ ++ irix5* | irix6* | nonstopux*) ++ if test "$GCC" = yes; then ++ archive_cmds_GCJ='$CC -shared $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ archive_cmds_GCJ='$LD -shared $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ hardcode_libdir_flag_spec_ld_GCJ='-rpath $libdir' ++ fi ++ hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator_GCJ=: ++ link_all_deplibs_GCJ=yes ++ ;; ++ ++ netbsd* | netbsdelf*-gnu) ++ if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then ++ archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' # a.out ++ else ++ archive_cmds_GCJ='$LD -shared -o $lib $libobjs $deplibs $linker_flags' # ELF ++ fi ++ hardcode_libdir_flag_spec_GCJ='-R$libdir' ++ hardcode_direct_GCJ=yes ++ hardcode_shlibpath_var_GCJ=no ++ ;; ++ ++ newsos6) ++ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct_GCJ=yes ++ hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator_GCJ=: ++ hardcode_shlibpath_var_GCJ=no ++ ;; ++ ++ openbsd*) ++ hardcode_direct_GCJ=yes ++ hardcode_shlibpath_var_GCJ=no ++ if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then ++ archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags ${wl}-retain-symbols-file,$export_symbols' ++ hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' ++ export_dynamic_flag_spec_GCJ='${wl}-E' ++ else ++ case $host_os in ++ openbsd[01].* | openbsd2.[0-7] | openbsd2.[0-7].*) ++ archive_cmds_GCJ='$LD -Bshareable -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec_GCJ='-R$libdir' ++ ;; ++ *) ++ archive_cmds_GCJ='$CC -shared $pic_flag -o $lib $libobjs $deplibs $compiler_flags' ++ hardcode_libdir_flag_spec_GCJ='${wl}-rpath,$libdir' ++ ;; ++ esac ++ fi ++ ;; ++ ++ os2*) ++ hardcode_libdir_flag_spec_GCJ='-L$libdir' ++ hardcode_minus_L_GCJ=yes ++ allow_undefined_flag_GCJ=unsupported ++ archive_cmds_GCJ='$echo "LIBRARY $libname INITINSTANCE" > $output_objdir/$libname.def~$echo "DESCRIPTION \"$libname\"" >> $output_objdir/$libname.def~$echo DATA >> $output_objdir/$libname.def~$echo " SINGLE NONSHARED" >> $output_objdir/$libname.def~$echo EXPORTS >> $output_objdir/$libname.def~emxexp $libobjs >> $output_objdir/$libname.def~$CC -Zdll -Zcrtdll -o $lib $libobjs $deplibs $compiler_flags $output_objdir/$libname.def' ++ old_archive_From_new_cmds_GCJ='emximp -o $output_objdir/$libname.a $output_objdir/$libname.def' ++ ;; ++ ++ osf3*) ++ if test "$GCC" = yes; then ++ allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ else ++ allow_undefined_flag_GCJ=' -expect_unresolved \*' ++ archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ fi ++ hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' ++ hardcode_libdir_separator_GCJ=: ++ ;; ++ ++ osf4* | osf5*) # as osf3* with the addition of -msym flag ++ if test "$GCC" = yes; then ++ allow_undefined_flag_GCJ=' ${wl}-expect_unresolved ${wl}\*' ++ archive_cmds_GCJ='$CC -shared${allow_undefined_flag} $libobjs $deplibs $compiler_flags ${wl}-msym ${wl}-soname ${wl}$soname `test -n "$verstring" && echo ${wl}-set_version ${wl}$verstring` ${wl}-update_registry ${wl}${output_objdir}/so_locations -o $lib' ++ hardcode_libdir_flag_spec_GCJ='${wl}-rpath ${wl}$libdir' ++ else ++ allow_undefined_flag_GCJ=' -expect_unresolved \*' ++ archive_cmds_GCJ='$LD -shared${allow_undefined_flag} $libobjs $deplibs $linker_flags -msym -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib' ++ archive_expsym_cmds_GCJ='for i in `cat $export_symbols`; do printf "%s %s\\n" -exported_symbol "\$i" >> $lib.exp; done; echo "-hidden">> $lib.exp~ ++ $LD -shared${allow_undefined_flag} -input $lib.exp $linker_flags $libobjs $deplibs -soname $soname `test -n "$verstring" && echo -set_version $verstring` -update_registry ${output_objdir}/so_locations -o $lib~$rm $lib.exp' ++ ++ # Both c and cxx compiler support -rpath directly ++ hardcode_libdir_flag_spec_GCJ='-rpath $libdir' ++ fi ++ hardcode_libdir_separator_GCJ=: ++ ;; ++ ++ solaris*) ++ no_undefined_flag_GCJ=' -z text' ++ if test "$GCC" = yes; then ++ wlarc='${wl}' ++ archive_cmds_GCJ='$CC -shared ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ ++ $CC -shared ${wl}-M ${wl}$lib.exp ${wl}-h ${wl}$soname -o $lib $libobjs $deplibs $compiler_flags~$rm $lib.exp' ++ else ++ wlarc='' ++ archive_cmds_GCJ='$LD -G${allow_undefined_flag} -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ archive_expsym_cmds_GCJ='$echo "{ global:" > $lib.exp~cat $export_symbols | $SED -e "s/\(.*\)/\1;/" >> $lib.exp~$echo "local: *; };" >> $lib.exp~ ++ $LD -G${allow_undefined_flag} -M $lib.exp -h $soname -o $lib $libobjs $deplibs $linker_flags~$rm $lib.exp' ++ fi ++ hardcode_libdir_flag_spec_GCJ='-R$libdir' ++ hardcode_shlibpath_var_GCJ=no ++ case $host_os in ++ solaris2.[0-5] | solaris2.[0-5].*) ;; ++ *) ++ # The compiler driver will combine linker options so we ++ # cannot just pass the convience library names through ++ # without $wl, iff we do not link with $LD. ++ # Luckily, gcc supports the same syntax we need for Sun Studio. ++ # Supported since Solaris 2.6 (maybe 2.5.1?) ++ case $wlarc in ++ '') ++ whole_archive_flag_spec_GCJ='-z allextract$convenience -z defaultextract' ;; ++ *) ++ whole_archive_flag_spec_GCJ='${wl}-z ${wl}allextract`for conv in $convenience\"\"; do test -n \"$conv\" && new_convenience=\"$new_convenience,$conv\"; done; $echo \"$new_convenience\"` ${wl}-z ${wl}defaultextract' ;; ++ esac ;; ++ esac ++ link_all_deplibs_GCJ=yes ++ ;; ++ ++ sunos4*) ++ if test "x$host_vendor" = xsequent; then ++ # Use $CC to link under sequent, because it throws in some extra .o ++ # files that make .init and .fini sections work. ++ archive_cmds_GCJ='$CC -G ${wl}-h $soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds_GCJ='$LD -assert pure-text -Bstatic -o $lib $libobjs $deplibs $linker_flags' ++ fi ++ hardcode_libdir_flag_spec_GCJ='-L$libdir' ++ hardcode_direct_GCJ=yes ++ hardcode_minus_L_GCJ=yes ++ hardcode_shlibpath_var_GCJ=no ++ ;; ++ ++ sysv4) ++ case $host_vendor in ++ sni) ++ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct_GCJ=yes # is this really true??? ++ ;; ++ siemens) ++ ## LD is ld it makes a PLAMLIB ++ ## CC just makes a GrossModule. ++ archive_cmds_GCJ='$LD -G -o $lib $libobjs $deplibs $linker_flags' ++ reload_cmds_GCJ='$CC -r -o $output$reload_objs' ++ hardcode_direct_GCJ=no ++ ;; ++ motorola) ++ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_direct_GCJ=no #Motorola manual says yes, but my tests say they lie ++ ;; ++ esac ++ runpath_var='LD_RUN_PATH' ++ hardcode_shlibpath_var_GCJ=no ++ ;; ++ ++ sysv4.3*) ++ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_shlibpath_var_GCJ=no ++ export_dynamic_flag_spec_GCJ='-Bexport' ++ ;; ++ ++ sysv4*MP*) ++ if test -d /usr/nec; then ++ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_shlibpath_var_GCJ=no ++ runpath_var=LD_RUN_PATH ++ hardcode_runpath_var=yes ++ ld_shlibs_GCJ=yes ++ fi ++ ;; ++ ++ sysv4*uw2* | sysv5OpenUNIX* | sysv5UnixWare7.[01].[10]* | unixware7*) ++ no_undefined_flag_GCJ='${wl}-z,text' ++ archive_cmds_need_lc_GCJ=no ++ hardcode_shlibpath_var_GCJ=no ++ runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ archive_cmds_GCJ='$CC -shared ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds_GCJ='$CC -G ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; ++ ++ sysv5* | sco3.2v5* | sco5v6*) ++ # Note: We can NOT use -z defs as we might desire, because we do not ++ # link with -lc, and that would cause any symbols used from libc to ++ # always be unresolved, which means just about no library would ++ # ever link correctly. If we're not using GNU ld we use -z text ++ # though, which does catch some bad symbols but isn't as heavy-handed ++ # as -z defs. ++ no_undefined_flag_GCJ='${wl}-z,text' ++ allow_undefined_flag_GCJ='${wl}-z,nodefs' ++ archive_cmds_need_lc_GCJ=no ++ hardcode_shlibpath_var_GCJ=no ++ hardcode_libdir_flag_spec_GCJ='`test -z "$SCOABSPATH" && echo ${wl}-R,$libdir`' ++ hardcode_libdir_separator_GCJ=':' ++ link_all_deplibs_GCJ=yes ++ export_dynamic_flag_spec_GCJ='${wl}-Bexport' ++ runpath_var='LD_RUN_PATH' ++ ++ if test "$GCC" = yes; then ++ archive_cmds_GCJ='$CC -shared ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_GCJ='$CC -shared ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ else ++ archive_cmds_GCJ='$CC -G ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ archive_expsym_cmds_GCJ='$CC -G ${wl}-Bexport:$export_symbols ${wl}-h,\${SCOABSPATH:+${install_libdir}/}$soname -o $lib $libobjs $deplibs $compiler_flags' ++ fi ++ ;; ++ ++ uts4*) ++ archive_cmds_GCJ='$LD -G -h $soname -o $lib $libobjs $deplibs $linker_flags' ++ hardcode_libdir_flag_spec_GCJ='-L$libdir' ++ hardcode_shlibpath_var_GCJ=no ++ ;; ++ ++ *) ++ ld_shlibs_GCJ=no ++ ;; ++ esac ++ fi ++ ++{ echo "$as_me:$LINENO: result: $ld_shlibs_GCJ" >&5 ++echo "${ECHO_T}$ld_shlibs_GCJ" >&6; } ++test "$ld_shlibs_GCJ" = no && can_build_shared=no ++ ++# ++# Do we need to explicitly link libc? ++# ++case "x$archive_cmds_need_lc_GCJ" in ++x|xyes) ++ # Assume -lc should be added ++ archive_cmds_need_lc_GCJ=yes ++ ++ if test "$enable_shared" = yes && test "$GCC" = yes; then ++ case $archive_cmds_GCJ in ++ *'~'*) ++ # FIXME: we may have to deal with multi-command sequences. ++ ;; ++ '$CC '*) ++ # Test whether the compiler implicitly links with -lc since on some ++ # systems, -lgcc has to come before -lc. If gcc already passes -lc ++ # to ld, don't add -lc before -lgcc. ++ { echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 ++echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6; } ++ $rm conftest* ++ printf "$lt_simple_compile_test_code" > conftest.$ac_ext ++ ++ if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 ++ (eval $ac_compile) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } 2>conftest.err; then ++ soname=conftest ++ lib=conftest ++ libobjs=conftest.$ac_objext ++ deplibs= ++ wl=$lt_prog_compiler_wl_GCJ ++ pic_flag=$lt_prog_compiler_pic_GCJ ++ compiler_flags=-v ++ linker_flags=-v ++ verstring= ++ output_objdir=. ++ libname=conftest ++ lt_save_allow_undefined_flag=$allow_undefined_flag_GCJ ++ allow_undefined_flag_GCJ= ++ if { (eval echo "$as_me:$LINENO: \"$archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 ++ (eval $archive_cmds_GCJ 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 ++ ac_status=$? ++ echo "$as_me:$LINENO: \$? = $ac_status" >&5 ++ (exit $ac_status); } ++ then ++ archive_cmds_need_lc_GCJ=no ++ else ++ archive_cmds_need_lc_GCJ=yes ++ fi ++ allow_undefined_flag_GCJ=$lt_save_allow_undefined_flag ++ else ++ cat conftest.err 1>&5 ++ fi ++ $rm conftest* ++ { echo "$as_me:$LINENO: result: $archive_cmds_need_lc_GCJ" >&5 ++echo "${ECHO_T}$archive_cmds_need_lc_GCJ" >&6; } ++ ;; ++ esac ++ fi ++ ;; ++esac ++ ++{ echo "$as_me:$LINENO: checking dynamic linker characteristics" >&5 ++echo $ECHO_N "checking dynamic linker characteristics... $ECHO_C" >&6; } ++library_names_spec= ++libname_spec='lib$name' ++soname_spec= ++shrext_cmds=".so" ++postinstall_cmds= ++postuninstall_cmds= ++finish_cmds= ++finish_eval= ++shlibpath_var= ++shlibpath_overrides_runpath=unknown ++version_type=none ++dynamic_linker="$host_os ld.so" ++sys_lib_dlsearch_path_spec="/lib /usr/lib" ++if test "$GCC" = yes; then ++ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if echo "$sys_lib_search_path_spec" | grep ';' >/dev/null ; then ++ # if the path contains ";" then we assume it to be the separator ++ # otherwise default to the standard path separator (i.e. ":") - it is ++ # assumed that no part of a normal pathname contains ";" but that should ++ # okay in the real world where ";" in dirpaths is itself problematic. ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++else ++ sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" ++fi ++need_lib_prefix=unknown ++hardcode_into_libs=no ++ ++# when you set need_version to no, make sure it does not cause -set_version ++# flags to be left without arguments ++need_version=unknown ++ ++case $host_os in ++aix3*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname.a' ++ shlibpath_var=LIBPATH ++ ++ # AIX 3 has no versioning support, so we append a major version to the name. ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ ++aix4* | aix5*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ hardcode_into_libs=yes ++ if test "$host_cpu" = ia64; then ++ # AIX 5 supports IA64 ++ library_names_spec='${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext}$versuffix $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ else ++ # With GCC up to 2.95.x, collect2 would create an import file ++ # for dependence libraries. The import file would start with ++ # the line `#! .'. This would cause the generated library to ++ # depend on `.', always an invalid library. This was fixed in ++ # development snapshots of GCC prior to 3.0. ++ case $host_os in ++ aix4 | aix4.[01] | aix4.[01].*) ++ if { echo '#if __GNUC__ > 2 || (__GNUC__ == 2 && __GNUC_MINOR__ >= 97)' ++ echo ' yes ' ++ echo '#endif'; } | ${CC} -E - | grep yes > /dev/null; then ++ : ++ else ++ can_build_shared=no ++ fi ++ ;; ++ esac ++ # AIX (on Power*) has no versioning support, so currently we can not hardcode correct ++ # soname into executable. Probably we can add versioning support to ++ # collect2, so additional links can be useful in future. ++ if test "$aix_use_runtimelinking" = yes; then ++ # If using run time linking (on AIX 4.2 or later) use lib.so ++ # instead of lib.a to let people know that these are not ++ # typical AIX shared libraries. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ else ++ # We preserve .a as extension for shared libraries through AIX4.2 ++ # and later when we are not doing run time linking. ++ library_names_spec='${libname}${release}.a $libname.a' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ fi ++ shlibpath_var=LIBPATH ++ fi ++ ;; ++ ++amigaos*) ++ library_names_spec='$libname.ixlibrary $libname.a' ++ # Create ${libname}_ixlibrary.a entries in /sys/libs. ++ finish_eval='for lib in `ls $libdir/*.ixlibrary 2>/dev/null`; do libname=`$echo "X$lib" | $Xsed -e '\''s%^.*/\([^/]*\)\.ixlibrary$%\1%'\''`; test $rm /sys/libs/${libname}_ixlibrary.a; $show "cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a"; cd /sys/libs && $LN_S $lib ${libname}_ixlibrary.a || exit 1; done' ++ ;; ++ ++beos*) ++ library_names_spec='${libname}${shared_ext}' ++ dynamic_linker="$host_os ld.so" ++ shlibpath_var=LIBRARY_PATH ++ ;; ++ ++bsdi[45]*) + version_type=linux + need_version=no +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' +- soname_spec='${libname}${release}.so$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/shlib /usr/lib /usr/X11/lib /usr/contrib/lib /lib /usr/local/lib" + sys_lib_dlsearch_path_spec="/shlib /usr/lib /usr/local/lib" +- export_dynamic_flag_spec=-rdynamic + # the default ld.so.conf also contains /usr/contrib/lib and + # /usr/X11R6/lib (/usr/X11 is a link to /usr/X11R6), but let us allow + # libtool to hard-code these into programs +@@ -6487,29 +18034,56 @@ + + cygwin* | mingw* | pw32*) + version_type=windows ++ shrext_cmds=".dll" + need_version=no + need_lib_prefix=no ++ + case $GCC,$host_os in +- yes,cygwin*) ++ yes,cygwin* | yes,mingw* | yes,pw32*) + library_names_spec='$libname.dll.a' +- soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' +- postinstall_cmds='dlpath=`bash 2>&1 -c '\''. $dir/${file}i;echo \$dlname'\''`~ ++ # DLL is installed to $(libdir)/../bin by postinstall_cmds ++ postinstall_cmds='base_file=`basename \${file}`~ ++ dlpath=`$SHELL 2>&1 -c '\''. $dir/'\''\${base_file}'\''i;echo \$dlname'\''`~ + dldir=$destdir/`dirname \$dlpath`~ + test -d \$dldir || mkdir -p \$dldir~ +- $install_prog .libs/$dlname \$dldir/$dlname' +- postuninstall_cmds='dldll=`bash 2>&1 -c '\''. $file; echo \$dlname'\''`~ ++ $install_prog $dir/$dlname \$dldir/$dlname~ ++ chmod a+x \$dldir/$dlname' ++ postuninstall_cmds='dldll=`$SHELL 2>&1 -c '\''. $file; echo \$dlname'\''`~ + dlpath=$dir/\$dldll~ + $rm \$dlpath' ++ shlibpath_overrides_runpath=yes ++ ++ case $host_os in ++ cygwin*) ++ # Cygwin DLLs use 'cyg' prefix rather than 'lib' ++ soname_spec='`echo ${libname} | sed -e 's/^lib/cyg/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec="/usr/lib /lib/w32api /lib /usr/local/lib" ++ ;; ++ mingw*) ++ # MinGW DLLs use traditional 'lib' prefix ++ soname_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | $SED -e "s/^libraries://" -e "s,=/,/,g"` ++ if echo "$sys_lib_search_path_spec" | grep ';[c-zC-Z]:/' >/dev/null; then ++ # It is most probably a Windows format PATH printed by ++ # mingw gcc, but we are running on Cygwin. Gcc prints its search ++ # path with ; separators, and with drive letters. We can handle the ++ # drive letters (cygwin fileutils understands them), so leave them, ++ # especially as we might pass files found there to a mingw objdump, ++ # which wouldn't understand a cygwinified path. Ahh. ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e 's/;/ /g'` ++ else ++ sys_lib_search_path_spec=`echo "$sys_lib_search_path_spec" | $SED -e "s/$PATH_SEPARATOR/ /g"` ++ fi ++ ;; ++ pw32*) ++ # pw32 DLLs use 'pw' prefix rather than 'lib' ++ library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext}' ++ ;; ++ esac + ;; +- yes,mingw*) +- library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll' +- sys_lib_search_path_spec=`$CC -print-search-dirs | grep "^libraries:" | sed -e "s/^libraries://" -e "s/;/ /g" -e "s,=/,/,g"` +- ;; +- yes,pw32*) +- library_names_spec='`echo ${libname} | sed -e 's/^lib/pw/'``echo ${release} | sed -e 's/./-/g'`${versuffix}.dll' +- ;; ++ + *) +- library_names_spec='${libname}`echo ${release} | sed -e 's/[.]/-/g'`${versuffix}.dll $libname.lib' ++ library_names_spec='${libname}`echo ${release} | $SED -e 's/[.]/-/g'`${versuffix}${shared_ext} $libname.lib' + ;; + esac + dynamic_linker='Win32 ld.exe' +@@ -6521,43 +18095,54 @@ + dynamic_linker="$host_os dyld" + version_type=darwin + need_lib_prefix=no +- need_version=no +- # FIXME: Relying on posixy $() will cause problems for +- # cross-compilation, but unfortunately the echo tests do not +- # yet detect zsh echo's removal of \ escapes. +- library_names_spec='${libname}${release}${versuffix}.$(test .$module = .yes && echo so || echo dylib) ${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib) ${libname}.$(test .$module = .yes && echo so || echo dylib)' +- soname_spec='${libname}${release}${major}.$(test .$module = .yes && echo so || echo dylib)' +- shlibpath_overrides_runpath=yes +- shlibpath_var=DYLD_LIBRARY_PATH +- ;; +- +-freebsd1*) +- dynamic_linker=no ++ need_version=no ++ library_names_spec='${libname}${release}${versuffix}$shared_ext ${libname}${release}${major}$shared_ext ${libname}$shared_ext' ++ soname_spec='${libname}${release}${major}$shared_ext' ++ shlibpath_overrides_runpath=yes ++ shlibpath_var=DYLD_LIBRARY_PATH ++ shrext_cmds='`test .$module = .yes && echo .so || echo .dylib`' ++ # Apple's gcc prints 'gcc -print-search-dirs' doesn't operate the same. ++ if test "$GCC" = yes; then ++ sys_lib_search_path_spec=`$CC -print-search-dirs | tr "\n" "$PATH_SEPARATOR" | sed -e 's/libraries:/@libraries:/' | tr "@" "\n" | grep "^libraries:" | sed -e "s/^libraries://" -e "s,=/,/,g" -e "s,$PATH_SEPARATOR, ,g" -e "s,.*,& /lib /usr/lib /usr/local/lib,g"` ++ else ++ sys_lib_search_path_spec='/lib /usr/lib /usr/local/lib' ++ fi ++ sys_lib_dlsearch_path_spec='/usr/local/lib /lib /usr/lib' + ;; + +-freebsd*-gnu*) ++dgux*) + version_type=linux + need_lib_prefix=no + need_version=no +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' +- soname_spec='${libname}${release}.so$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname$shared_ext' ++ soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH +- shlibpath_overrides_runpath=no +- hardcode_into_libs=yes +- dynamic_linker='GNU/FreeBSD ld.so' + ;; + +-freebsd*) +- objformat=`test -x /usr/bin/objformat && /usr/bin/objformat || echo aout` ++freebsd1*) ++ dynamic_linker=no ++ ;; ++ ++freebsd* | dragonfly*) ++ # DragonFly does not have aout. When/if they implement a new ++ # versioning mechanism, adjust this. ++ if test -x /usr/bin/objformat; then ++ objformat=`/usr/bin/objformat` ++ else ++ case $host_os in ++ freebsd[123]*) objformat=aout ;; ++ *) objformat=elf ;; ++ esac ++ fi + version_type=freebsd-$objformat + case $version_type in + freebsd-elf*) +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so $libname.so' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' + need_version=no + need_lib_prefix=no + ;; + freebsd-*) +- library_names_spec='${libname}${release}.so$versuffix $libname.so$versuffix' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix $libname${shared_ext}$versuffix' + need_version=yes + ;; + esac +@@ -6566,10 +18151,19 @@ + freebsd2*) + shlibpath_overrides_runpath=yes + ;; +- *) ++ freebsd3.[01]* | freebsdelf3.[01]*) ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; ++ freebsd3.[2-9]* | freebsdelf3.[2-9]* | \ ++ freebsd4.[0-5] | freebsdelf4.[0-5] | freebsd4.1.1 | freebsdelf4.1.1) + shlibpath_overrides_runpath=no + hardcode_into_libs=yes + ;; ++ freebsd*) # from 4.6 on ++ shlibpath_overrides_runpath=yes ++ hardcode_into_libs=yes ++ ;; + esac + ;; + +@@ -6577,8 +18171,8 @@ + version_type=linux + need_lib_prefix=no + need_version=no +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so${major} ${libname}.so' +- soname_spec='${libname}${release}.so$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}${major} ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + hardcode_into_libs=yes + ;; +@@ -6586,36 +18180,87 @@ + hpux9* | hpux10* | hpux11*) + # Give a soname corresponding to the major version so that dld.sl refuses to + # link against other versions. +- dynamic_linker="$host_os dld.sl" + version_type=sunos + need_lib_prefix=no + need_version=no +- shlibpath_var=SHLIB_PATH +- shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH +- library_names_spec='${libname}${release}.sl$versuffix ${libname}${release}.sl$major $libname.sl' +- soname_spec='${libname}${release}.sl$major' ++ case $host_cpu in ++ ia64*) ++ shrext_cmds='.so' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.so" ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ if test "X$HPUX_IA64_MODE" = X32; then ++ sys_lib_search_path_spec="/usr/lib/hpux32 /usr/local/lib/hpux32 /usr/local/lib" ++ else ++ sys_lib_search_path_spec="/usr/lib/hpux64 /usr/local/lib/hpux64" ++ fi ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ hppa*64*) ++ shrext_cmds='.sl' ++ hardcode_into_libs=yes ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=LD_LIBRARY_PATH # How should we handle SHLIB_PATH ++ shlibpath_overrides_runpath=yes # Unless +noenvvar is specified. ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ sys_lib_search_path_spec="/usr/lib/pa20_64 /usr/ccs/lib/pa20_64" ++ sys_lib_dlsearch_path_spec=$sys_lib_search_path_spec ++ ;; ++ *) ++ shrext_cmds='.sl' ++ dynamic_linker="$host_os dld.sl" ++ shlibpath_var=SHLIB_PATH ++ shlibpath_overrides_runpath=no # +s is required to enable SHLIB_PATH ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ ;; ++ esac + # HP-UX runs *really* slowly unless shared libraries are mode 555. + postinstall_cmds='chmod 555 $lib' + ;; + ++interix3*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ dynamic_linker='Interix 3.x ld.so.1 (PE, like ELF)' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ ;; ++ + irix5* | irix6* | nonstopux*) + case $host_os in + nonstopux*) version_type=nonstopux ;; +- *) version_type=irix ;; ++ *) ++ if test "$lt_cv_prog_gnu_ld" = yes; then ++ version_type=linux ++ else ++ version_type=irix ++ fi ;; + esac + need_lib_prefix=no + need_version=no +- soname_spec='${libname}${release}.so$major' +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so $libname.so' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${release}${shared_ext} $libname${shared_ext}' + case $host_os in + irix5* | nonstopux*) + libsuff= shlibsuff= + ;; + *) + case $LD in # libtool.m4 will add one of these switches to LD +- *-32|*"-32 ") libsuff= shlibsuff= libmagic=32-bit;; +- *-n32|*"-n32 ") libsuff=32 shlibsuff=N32 libmagic=N32;; +- *-64|*"-64 ") libsuff=64 shlibsuff=64 libmagic=64-bit;; ++ *-32|*"-32 "|*-melf32bsmip|*"-melf32bsmip ") ++ libsuff= shlibsuff= libmagic=32-bit;; ++ *-n32|*"-n32 "|*-melf32bmipn32|*"-melf32bmipn32 ") ++ libsuff=32 shlibsuff=N32 libmagic=N32;; ++ *-64|*"-64 "|*-melf64bmip|*"-melf64bmip ") ++ libsuff=64 shlibsuff=64 libmagic=64-bit;; + *) libsuff= shlibsuff= libmagic=never-match;; + esac + ;; +@@ -6624,20 +18269,21 @@ + shlibpath_overrides_runpath=no + sys_lib_search_path_spec="/usr/lib${libsuff} /lib${libsuff} /usr/local/lib${libsuff}" + sys_lib_dlsearch_path_spec="/usr/lib${libsuff} /lib${libsuff}" ++ hardcode_into_libs=yes + ;; + + # No shared lib support for Linux oldld, aout, or coff. +-linux-gnuoldld* | linux-gnuaout* | linux-gnucoff*) ++linux*oldld* | linux*aout* | linux*coff*) + dynamic_linker=no + ;; + + # This must be Linux ELF. +-linux-gnu*) ++linux* | k*bsd*-gnu) + version_type=linux + need_lib_prefix=no + need_version=no +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' +- soname_spec='${libname}${release}.so$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -n $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=no +@@ -6646,6 +18292,12 @@ + # before this can be enabled. + hardcode_into_libs=yes + ++ # Append ld.so.conf contents to the search path ++ if test -f /etc/ld.so.conf; then ++ lt_ld_extra=`awk '/^include / { system(sprintf("cd /etc; cat %s", \$2)); skip = 1; } { if (!skip) print \$0; skip = 0; }' < /etc/ld.so.conf | $SED -e 's/#.*//;s/[:, ]/ /g;s/=[^=]*$//;s/=[^= ]* / /g;/^$/d' | tr '\n' ' '` ++ sys_lib_dlsearch_path_spec="/lib /usr/lib $lt_ld_extra" ++ fi ++ + # We used to test for /lib/ld.so.1 and disable shared libraries on + # powerpc, because MkLinux only supported shared libraries with the + # GNU dynamic linker. Since this was broken with cross compilers, +@@ -6655,17 +18307,29 @@ + dynamic_linker='GNU/Linux ld.so' + ;; + ++netbsdelf*-gnu) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=no ++ hardcode_into_libs=yes ++ dynamic_linker='NetBSD ld.elf_so' ++ ;; ++ + netbsd*) + version_type=sunos + need_lib_prefix=no + need_version=no + if echo __ELF__ | $CC -E - | grep __ELF__ >/dev/null; then +- library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' + dynamic_linker='NetBSD (a.out) ld.so' + else +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major ${libname}${release}.so ${libname}.so' +- soname_spec='${libname}${release}.so$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major ${libname}${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' + dynamic_linker='NetBSD ld.elf_so' + fi + shlibpath_var=LD_LIBRARY_PATH +@@ -6675,65 +18339,73 @@ + + newsos6) + version_type=linux +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ shlibpath_var=LD_LIBRARY_PATH ++ shlibpath_overrides_runpath=yes ++ ;; ++ ++nto-qnx*) ++ version_type=linux ++ need_lib_prefix=no ++ need_version=no ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + ;; + + openbsd*) + version_type=sunos ++ sys_lib_dlsearch_path_spec="/usr/lib" + need_lib_prefix=no +- need_version=no ++ # Some older versions of OpenBSD (3.3 at least) *do* need versioned libs. ++ case $host_os in ++ openbsd3.3 | openbsd3.3.*) need_version=yes ;; ++ *) need_version=no ;; ++ esac ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' ++ finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' ++ shlibpath_var=LD_LIBRARY_PATH + if test -z "`echo __ELF__ | $CC -E - | grep __ELF__`" || test "$host_os-$host_cpu" = "openbsd2.8-powerpc"; then +- case "$host_os" in +- openbsd2.[89] | openbsd2.[89].*) +- shlibpath_overrides_runpath=no +- ;; +- *) +- shlibpath_overrides_runpath=yes +- ;; +- esac ++ case $host_os in ++ openbsd2.[89] | openbsd2.[89].*) ++ shlibpath_overrides_runpath=no ++ ;; ++ *) ++ shlibpath_overrides_runpath=yes ++ ;; ++ esac + else + shlibpath_overrides_runpath=yes + fi +- library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' +- finish_cmds='PATH="\$PATH:/sbin" ldconfig -m $libdir' +- shlibpath_var=LD_LIBRARY_PATH + ;; + + os2*) + libname_spec='$name' ++ shrext_cmds=".dll" + need_lib_prefix=no +- library_names_spec='$libname.dll $libname.a' ++ library_names_spec='$libname${shared_ext} $libname.a' + dynamic_linker='OS/2 ld.exe' + shlibpath_var=LIBPATH + ;; + + osf3* | osf4* | osf5*) + version_type=osf +- need_version=no + need_lib_prefix=no +- soname_spec='${libname}${release}.so$major' +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' ++ need_version=no ++ soname_spec='${libname}${release}${shared_ext}$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' + shlibpath_var=LD_LIBRARY_PATH + sys_lib_search_path_spec="/usr/shlib /usr/ccs/lib /usr/lib/cmplrs/cc /usr/lib /usr/local/lib /var/shlib" + sys_lib_dlsearch_path_spec="$sys_lib_search_path_spec" +- hardcode_into_libs=yes +- ;; +- +-sco3.2v5*) +- version_type=osf +- soname_spec='${libname}${release}.so$major' +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' +- shlibpath_var=LD_LIBRARY_PATH + ;; + + solaris*) + version_type=linux + need_lib_prefix=no + need_version=no +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' +- soname_spec='${libname}${release}.so$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes + hardcode_into_libs=yes +@@ -6743,7 +18415,7 @@ + + sunos4*) + version_type=sunos +- library_names_spec='${libname}${release}.so$versuffix ${libname}.so$versuffix' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${shared_ext}$versuffix' + finish_cmds='PATH="\$PATH:/usr/etc" ldconfig $libdir' + shlibpath_var=LD_LIBRARY_PATH + shlibpath_overrides_runpath=yes +@@ -6753,10 +18425,10 @@ + need_version=yes + ;; + +-sysv4 | sysv4.2uw2* | sysv4.3* | sysv5*) ++sysv4 | sysv4.3*) + version_type=linux +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' +- soname_spec='${libname}${release}.so$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH + case $host_vendor in + sni) +@@ -6777,77 +18449,87 @@ + esac + ;; + +-uts4*) +- version_type=linux +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' +- soname_spec='${libname}${release}.so$major' +- shlibpath_var=LD_LIBRARY_PATH ++sysv4*MP*) ++ if test -d /usr/nec ;then ++ version_type=linux ++ library_names_spec='$libname${shared_ext}.$versuffix $libname${shared_ext}.$major $libname${shared_ext}' ++ soname_spec='$libname${shared_ext}.$major' ++ shlibpath_var=LD_LIBRARY_PATH ++ fi + ;; + +-dgux*) +- version_type=linux ++sysv5* | sco3.2v5* | sco5v6* | unixware* | OpenUNIX* | sysv4*uw2*) ++ version_type=freebsd-elf + need_lib_prefix=no + need_version=no +- library_names_spec='${libname}${release}.so$versuffix ${libname}${release}.so$major $libname.so' +- soname_spec='${libname}${release}.so$major' ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext} $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' + shlibpath_var=LD_LIBRARY_PATH ++ hardcode_into_libs=yes ++ if test "$with_gnu_ld" = yes; then ++ sys_lib_search_path_spec='/usr/local/lib /usr/gnu/lib /usr/ccs/lib /usr/lib /lib' ++ shlibpath_overrides_runpath=no ++ else ++ sys_lib_search_path_spec='/usr/ccs/lib /usr/lib' ++ shlibpath_overrides_runpath=yes ++ case $host_os in ++ sco3.2v5*) ++ sys_lib_search_path_spec="$sys_lib_search_path_spec /lib" ++ ;; ++ esac ++ fi ++ sys_lib_dlsearch_path_spec='/usr/lib' + ;; + +-sysv4*MP*) +- if test -d /usr/nec ;then +- version_type=linux +- library_names_spec='$libname.so.$versuffix $libname.so.$major $libname.so' +- soname_spec='$libname.so.$major' +- shlibpath_var=LD_LIBRARY_PATH +- fi ++uts4*) ++ version_type=linux ++ library_names_spec='${libname}${release}${shared_ext}$versuffix ${libname}${release}${shared_ext}$major $libname${shared_ext}' ++ soname_spec='${libname}${release}${shared_ext}$major' ++ shlibpath_var=LD_LIBRARY_PATH + ;; + + *) + dynamic_linker=no + ;; + esac +-echo "$as_me:$LINENO: result: $dynamic_linker" >&5 +-echo "${ECHO_T}$dynamic_linker" >&6 ++{ echo "$as_me:$LINENO: result: $dynamic_linker" >&5 ++echo "${ECHO_T}$dynamic_linker" >&6; } + test "$dynamic_linker" = no && can_build_shared=no + +-# Report the final consequences. +-echo "$as_me:$LINENO: checking if libtool supports shared libraries" >&5 +-echo $ECHO_N "checking if libtool supports shared libraries... $ECHO_C" >&6 +-echo "$as_me:$LINENO: result: $can_build_shared" >&5 +-echo "${ECHO_T}$can_build_shared" >&6 +- +-echo "$as_me:$LINENO: checking whether to build shared libraries" >&5 +-echo $ECHO_N "checking whether to build shared libraries... $ECHO_C" >&6 +-test "$can_build_shared" = "no" && enable_shared=no ++variables_saved_for_relink="PATH $shlibpath_var $runpath_var" ++if test "$GCC" = yes; then ++ variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" ++fi + +-# On AIX, shared libraries and static libraries use the same namespace, and +-# are all built from PIC. +-case "$host_os" in +-aix3*) +- test "$enable_shared" = yes && enable_static=no +- if test -n "$RANLIB"; then +- archive_cmds="$archive_cmds~\$RANLIB \$lib" +- postinstall_cmds='$RANLIB $lib' +- fi +- ;; ++{ echo "$as_me:$LINENO: checking how to hardcode library paths into programs" >&5 ++echo $ECHO_N "checking how to hardcode library paths into programs... $ECHO_C" >&6; } ++hardcode_action_GCJ= ++if test -n "$hardcode_libdir_flag_spec_GCJ" || \ ++ test -n "$runpath_var_GCJ" || \ ++ test "X$hardcode_automatic_GCJ" = "Xyes" ; then + +-aix4*) +- if test "$host_cpu" != ia64 && test "$aix_use_runtimelinking" = no ; then +- test "$enable_shared" = yes && enable_static=no ++ # We can hardcode non-existant directories. ++ if test "$hardcode_direct_GCJ" != no && ++ # If the only mechanism to avoid hardcoding is shlibpath_var, we ++ # have to relink, otherwise we might link with an installed library ++ # when we should be linking with a yet-to-be-installed one ++ ## test "$_LT_AC_TAGVAR(hardcode_shlibpath_var, GCJ)" != no && ++ test "$hardcode_minus_L_GCJ" != no; then ++ # Linking always hardcodes the temporary library directory. ++ hardcode_action_GCJ=relink ++ else ++ # We can link without hardcoding, and we can hardcode nonexisting dirs. ++ hardcode_action_GCJ=immediate + fi +- ;; +-esac +-echo "$as_me:$LINENO: result: $enable_shared" >&5 +-echo "${ECHO_T}$enable_shared" >&6 +- +-echo "$as_me:$LINENO: checking whether to build static libraries" >&5 +-echo $ECHO_N "checking whether to build static libraries... $ECHO_C" >&6 +-# Make sure either enable_shared or enable_static is yes. +-test "$enable_shared" = yes || enable_static=yes +-echo "$as_me:$LINENO: result: $enable_static" >&5 +-echo "${ECHO_T}$enable_static" >&6 ++else ++ # We cannot hardcode anything, or else we can only hardcode existing ++ # directories. ++ hardcode_action_GCJ=unsupported ++fi ++{ echo "$as_me:$LINENO: result: $hardcode_action_GCJ" >&5 ++echo "${ECHO_T}$hardcode_action_GCJ" >&6; } + +-if test "$hardcode_action" = relink; then ++if test "$hardcode_action_GCJ" = relink; then + # Fast installation is not supported + enable_fast_install=no + elif test "$shlibpath_overrides_runpath" = yes || +@@ -6856,832 +18538,558 @@ + enable_fast_install=needless + fi + +-variables_saved_for_relink="PATH $shlibpath_var $runpath_var" +-if test "$GCC" = yes; then +- variables_saved_for_relink="$variables_saved_for_relink GCC_EXEC_PREFIX COMPILER_PATH LIBRARY_PATH" +-fi + +-if test "x$enable_dlopen" != xyes; then +- enable_dlopen=unknown +- enable_dlopen_self=unknown +- enable_dlopen_self_static=unknown +-else +- lt_cv_dlopen=no +- lt_cv_dlopen_libs= ++# The else clause should only fire when bootstrapping the ++# libtool distribution, otherwise you forgot to ship ltmain.sh ++# with your package, and you will get complaints that there are ++# no rules to generate ltmain.sh. ++if test -f "$ltmain"; then ++ # See if we are running on zsh, and set the options which allow our commands through ++ # without removal of \ escapes. ++ if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++ fi ++ # Now quote all the things that may contain metacharacters while being ++ # careful not to overquote the AC_SUBSTed values. We take copies of the ++ # variables and quote the copies for generation of the libtool script. ++ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ ++ SED SHELL STRIP \ ++ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ ++ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ ++ deplibs_check_method reload_flag reload_cmds need_locks \ ++ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ ++ lt_cv_sys_global_symbol_to_c_name_address \ ++ sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ ++ old_postinstall_cmds old_postuninstall_cmds \ ++ compiler_GCJ \ ++ CC_GCJ \ ++ LD_GCJ \ ++ lt_prog_compiler_wl_GCJ \ ++ lt_prog_compiler_pic_GCJ \ ++ lt_prog_compiler_static_GCJ \ ++ lt_prog_compiler_no_builtin_flag_GCJ \ ++ export_dynamic_flag_spec_GCJ \ ++ thread_safe_flag_spec_GCJ \ ++ whole_archive_flag_spec_GCJ \ ++ enable_shared_with_static_runtimes_GCJ \ ++ old_archive_cmds_GCJ \ ++ old_archive_from_new_cmds_GCJ \ ++ predep_objects_GCJ \ ++ postdep_objects_GCJ \ ++ predeps_GCJ \ ++ postdeps_GCJ \ ++ compiler_lib_search_path_GCJ \ ++ archive_cmds_GCJ \ ++ archive_expsym_cmds_GCJ \ ++ postinstall_cmds_GCJ \ ++ postuninstall_cmds_GCJ \ ++ old_archive_from_expsyms_cmds_GCJ \ ++ allow_undefined_flag_GCJ \ ++ no_undefined_flag_GCJ \ ++ export_symbols_cmds_GCJ \ ++ hardcode_libdir_flag_spec_GCJ \ ++ hardcode_libdir_flag_spec_ld_GCJ \ ++ hardcode_libdir_separator_GCJ \ ++ hardcode_automatic_GCJ \ ++ module_cmds_GCJ \ ++ module_expsym_cmds_GCJ \ ++ lt_cv_prog_compiler_c_o_GCJ \ ++ exclude_expsyms_GCJ \ ++ include_expsyms_GCJ; do ++ ++ case $var in ++ old_archive_cmds_GCJ | \ ++ old_archive_from_new_cmds_GCJ | \ ++ archive_cmds_GCJ | \ ++ archive_expsym_cmds_GCJ | \ ++ module_cmds_GCJ | \ ++ module_expsym_cmds_GCJ | \ ++ old_archive_from_expsyms_cmds_GCJ | \ ++ export_symbols_cmds_GCJ | \ ++ extract_expsyms_cmds | reload_cmds | finish_cmds | \ ++ postinstall_cmds | postuninstall_cmds | \ ++ old_postinstall_cmds | old_postuninstall_cmds | \ ++ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) ++ # Double-quote double-evaled strings. ++ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" ++ ;; ++ *) ++ eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$sed_quote_subst\"\`\\\"" ++ ;; ++ esac ++ done ++ ++ case $lt_echo in ++ *'\$0 --fallback-echo"') ++ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` ++ ;; ++ esac ++ ++cfgfile="$ofile" ++ ++ cat <<__EOF__ >> "$cfgfile" ++# ### BEGIN LIBTOOL TAG CONFIG: $tagname ++ ++# Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: ++ ++# Shell to use when invoking shell scripts. ++SHELL=$lt_SHELL ++ ++# Whether or not to build shared libraries. ++build_libtool_libs=$enable_shared ++ ++# Whether or not to build static libraries. ++build_old_libs=$enable_static ++ ++# Whether or not to add -lc for building shared libraries. ++build_libtool_need_lc=$archive_cmds_need_lc_GCJ ++ ++# Whether or not to disallow shared libs when runtime libs are static ++allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_GCJ ++ ++# Whether or not to optimize for fast installation. ++fast_install=$enable_fast_install ++ ++# The host system. ++host_alias=$host_alias ++host=$host ++host_os=$host_os ++ ++# The build system. ++build_alias=$build_alias ++build=$build ++build_os=$build_os ++ ++# An echo program that does not interpret backslashes. ++echo=$lt_echo ++ ++# The archiver. ++AR=$lt_AR ++AR_FLAGS=$lt_AR_FLAGS ++ ++# A C compiler. ++LTCC=$lt_LTCC ++ ++# LTCC compiler flags. ++LTCFLAGS=$lt_LTCFLAGS ++ ++# A language-specific compiler. ++CC=$lt_compiler_GCJ ++ ++# Is the compiler the GNU C compiler? ++with_gcc=$GCC_GCJ ++ ++# An ERE matcher. ++EGREP=$lt_EGREP ++ ++# The linker used to build libraries. ++LD=$lt_LD_GCJ ++ ++# Whether we need hard or soft links. ++LN_S=$lt_LN_S ++ ++# A BSD-compatible nm program. ++NM=$lt_NM ++ ++# A symbol stripping program ++STRIP=$lt_STRIP ++ ++# Used to examine libraries when file_magic_cmd begins "file" ++MAGIC_CMD=$MAGIC_CMD ++ ++# Used on cygwin: DLL creation program. ++DLLTOOL="$DLLTOOL" ++ ++# Used on cygwin: object dumper. ++OBJDUMP="$OBJDUMP" ++ ++# Used on cygwin: assembler. ++AS="$AS" ++ ++# The name of the directory that contains temporary libtool files. ++objdir=$objdir ++ ++# How to create reloadable object files. ++reload_flag=$lt_reload_flag ++reload_cmds=$lt_reload_cmds ++ ++# How to pass a linker flag through the compiler. ++wl=$lt_lt_prog_compiler_wl_GCJ ++ ++# Object file suffix (normally "o"). ++objext="$ac_objext" ++ ++# Old archive suffix (normally "a"). ++libext="$libext" ++ ++# Shared library suffix (normally ".so"). ++shrext_cmds='$shrext_cmds' + +- case $host_os in +- beos*) +- lt_cv_dlopen="load_add_on" +- lt_cv_dlopen_libs= +- lt_cv_dlopen_self=yes +- ;; ++# Executable file suffix (normally ""). ++exeext="$exeext" + +- cygwin* | mingw* | pw32*) +- lt_cv_dlopen="LoadLibrary" +- lt_cv_dlopen_libs= +- ;; ++# Additional compiler flags for building library objects. ++pic_flag=$lt_lt_prog_compiler_pic_GCJ ++pic_mode=$pic_mode + +- *) +- echo "$as_me:$LINENO: checking for shl_load" >&5 +-echo $ECHO_N "checking for shl_load... $ECHO_C" >&6 +-if test "${ac_cv_func_shl_load+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define shl_load to an innocuous variant, in case declares shl_load. +- For example, HP-UX 11i declares gettimeofday. */ +-#define shl_load innocuous_shl_load ++# What is the maximum length of a command? ++max_cmd_len=$lt_cv_sys_max_cmd_len + +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char shl_load (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ ++# Does compiler simultaneously support -c and -o options? ++compiler_c_o=$lt_lt_cv_prog_compiler_c_o_GCJ + +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif ++# Must we lock files when doing compilation? ++need_locks=$lt_need_locks + +-#undef shl_load ++# Do we need the lib prefix for modules? ++need_lib_prefix=$need_lib_prefix + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-{ +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char shl_load (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_shl_load) || defined (__stub___shl_load) +-choke me +-#else +-char (*f) () = shl_load; +-#endif +-#ifdef __cplusplus +-} +-#endif ++# Do we need a version for libraries? ++need_version=$need_version + +-int +-main () +-{ +-return f != shl_load; +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_func_shl_load=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# Whether dlopen is supported. ++dlopen_support=$enable_dlopen + +-ac_cv_func_shl_load=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-echo "$as_me:$LINENO: result: $ac_cv_func_shl_load" >&5 +-echo "${ECHO_T}$ac_cv_func_shl_load" >&6 +-if test $ac_cv_func_shl_load = yes; then +- lt_cv_dlopen="shl_load" +-else +- echo "$as_me:$LINENO: checking for shl_load in -ldld" >&5 +-echo $ECHO_N "checking for shl_load in -ldld... $ECHO_C" >&6 +-if test "${ac_cv_lib_dld_shl_load+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ ++# Whether dlopen of programs is supported. ++dlopen_self=$enable_dlopen_self + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char shl_load (); +-int +-main () +-{ +-shl_load (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_dld_shl_load=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# Whether dlopen of statically linked programs is supported. ++dlopen_self_static=$enable_dlopen_self_static + +-ac_cv_lib_dld_shl_load=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_shl_load" >&5 +-echo "${ECHO_T}$ac_cv_lib_dld_shl_load" >&6 +-if test $ac_cv_lib_dld_shl_load = yes; then +- lt_cv_dlopen="shl_load" lt_cv_dlopen_libs="-dld" +-else +- echo "$as_me:$LINENO: checking for dlopen" >&5 +-echo $ECHO_N "checking for dlopen... $ECHO_C" >&6 +-if test "${ac_cv_func_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ +-/* Define dlopen to an innocuous variant, in case declares dlopen. +- For example, HP-UX 11i declares gettimeofday. */ +-#define dlopen innocuous_dlopen ++# Compiler flag to prevent dynamic linking. ++link_static_flag=$lt_lt_prog_compiler_static_GCJ + +-/* System header to define __stub macros and hopefully few prototypes, +- which can conflict with char dlopen (); below. +- Prefer to if __STDC__ is defined, since +- exists even on freestanding compilers. */ ++# Compiler flag to turn off builtin functions. ++no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_GCJ + +-#ifdef __STDC__ +-# include +-#else +-# include +-#endif ++# Compiler flag to allow reflexive dlopens. ++export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_GCJ + +-#undef dlopen ++# Compiler flag to generate shared objects directly from archives. ++whole_archive_flag_spec=$lt_whole_archive_flag_spec_GCJ + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-{ +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dlopen (); +-/* The GNU C library defines this for functions which it implements +- to always fail with ENOSYS. Some functions are actually named +- something starting with __ and the normal name is an alias. */ +-#if defined (__stub_dlopen) || defined (__stub___dlopen) +-choke me +-#else +-char (*f) () = dlopen; +-#endif +-#ifdef __cplusplus +-} +-#endif ++# Compiler flag to generate thread-safe objects. ++thread_safe_flag_spec=$lt_thread_safe_flag_spec_GCJ + +-int +-main () +-{ +-return f != dlopen; +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_func_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# Library versioning type. ++version_type=$version_type + +-ac_cv_func_dlopen=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-fi +-echo "$as_me:$LINENO: result: $ac_cv_func_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_func_dlopen" >&6 +-if test $ac_cv_func_dlopen = yes; then +- lt_cv_dlopen="dlopen" +-else +- echo "$as_me:$LINENO: checking for dlopen in -ldl" >&5 +-echo $ECHO_N "checking for dlopen in -ldl... $ECHO_C" >&6 +-if test "${ac_cv_lib_dl_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldl $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ ++# Format of library name prefix. ++libname_spec=$lt_libname_spec + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dlopen (); +-int +-main () +-{ +-dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_dl_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# List of archive names. First name is the real one, the rest are links. ++# The last name is the one that the linker finds with -lNAME. ++library_names_spec=$lt_library_names_spec ++ ++# The coded name of the library, if different from the real name. ++soname_spec=$lt_soname_spec ++ ++# Commands used to build and install an old-style archive. ++RANLIB=$lt_RANLIB ++old_archive_cmds=$lt_old_archive_cmds_GCJ ++old_postinstall_cmds=$lt_old_postinstall_cmds ++old_postuninstall_cmds=$lt_old_postuninstall_cmds + +-ac_cv_lib_dl_dlopen=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dl_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_dl_dlopen" >&6 +-if test $ac_cv_lib_dl_dlopen = yes; then +- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-ldl" +-else +- echo "$as_me:$LINENO: checking for dlopen in -lsvld" >&5 +-echo $ECHO_N "checking for dlopen in -lsvld... $ECHO_C" >&6 +-if test "${ac_cv_lib_svld_dlopen+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-lsvld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ ++# Create an old-style archive from a shared archive. ++old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_GCJ + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dlopen (); +-int +-main () +-{ +-dlopen (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_svld_dlopen=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# Create a temporary old-style archive to link instead of a shared archive. ++old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_GCJ + +-ac_cv_lib_svld_dlopen=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_svld_dlopen" >&5 +-echo "${ECHO_T}$ac_cv_lib_svld_dlopen" >&6 +-if test $ac_cv_lib_svld_dlopen = yes; then +- lt_cv_dlopen="dlopen" lt_cv_dlopen_libs="-lsvld" +-else +- echo "$as_me:$LINENO: checking for dld_link in -ldld" >&5 +-echo $ECHO_N "checking for dld_link in -ldld... $ECHO_C" >&6 +-if test "${ac_cv_lib_dld_dld_link+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- ac_check_lib_save_LIBS=$LIBS +-LIBS="-ldld $LIBS" +-cat >conftest.$ac_ext <<_ACEOF +-/* confdefs.h. */ +-_ACEOF +-cat confdefs.h >>conftest.$ac_ext +-cat >>conftest.$ac_ext <<_ACEOF +-/* end confdefs.h. */ ++# Commands used to build and install a shared archive. ++archive_cmds=$lt_archive_cmds_GCJ ++archive_expsym_cmds=$lt_archive_expsym_cmds_GCJ ++postinstall_cmds=$lt_postinstall_cmds ++postuninstall_cmds=$lt_postuninstall_cmds + +-/* Override any gcc2 internal prototype to avoid an error. */ +-#ifdef __cplusplus +-extern "C" +-#endif +-/* We use char because int might match the return type of a gcc2 +- builtin and then its argument prototype would still apply. */ +-char dld_link (); +-int +-main () +-{ +-dld_link (); +- ; +- return 0; +-} +-_ACEOF +-rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 +- ac_status=$? +- grep -v '^ *+' conftest.er1 >conftest.err +- rm -f conftest.er1 +- cat conftest.err >&5 +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then +- ac_cv_lib_dld_dld_link=yes +-else +- echo "$as_me: failed program was:" >&5 +-sed 's/^/| /' conftest.$ac_ext >&5 ++# Commands used to build a loadable module (assumed same as above if empty) ++module_cmds=$lt_module_cmds_GCJ ++module_expsym_cmds=$lt_module_expsym_cmds_GCJ + +-ac_cv_lib_dld_dld_link=no +-fi +-rm -f conftest.err conftest.$ac_objext \ +- conftest$ac_exeext conftest.$ac_ext +-LIBS=$ac_check_lib_save_LIBS +-fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_dld_dld_link" >&5 +-echo "${ECHO_T}$ac_cv_lib_dld_dld_link" >&6 +-if test $ac_cv_lib_dld_dld_link = yes; then +- lt_cv_dlopen="dld_link" lt_cv_dlopen_libs="-dld" +-fi ++# Commands to strip libraries. ++old_striplib=$lt_old_striplib ++striplib=$lt_striplib + ++# Dependencies to place before the objects being linked to create a ++# shared library. ++predep_objects=$lt_predep_objects_GCJ ++ ++# Dependencies to place after the objects being linked to create a ++# shared library. ++postdep_objects=$lt_postdep_objects_GCJ ++ ++# Dependencies to place before the objects being linked to create a ++# shared library. ++predeps=$lt_predeps_GCJ ++ ++# Dependencies to place after the objects being linked to create a ++# shared library. ++postdeps=$lt_postdeps_GCJ ++ ++# The library search path used internally by the compiler when linking ++# a shared library. ++compiler_lib_search_path=$lt_compiler_lib_search_path_GCJ + +-fi ++# Method to check whether dependent libraries are shared objects. ++deplibs_check_method=$lt_deplibs_check_method + ++# Command to use when deplibs_check_method == file_magic. ++file_magic_cmd=$lt_file_magic_cmd + +-fi ++# Flag that allows shared libraries with undefined symbols to be built. ++allow_undefined_flag=$lt_allow_undefined_flag_GCJ + ++# Flag that forces no undefined symbols. ++no_undefined_flag=$lt_no_undefined_flag_GCJ + +-fi ++# Commands used to finish a libtool library installation in a directory. ++finish_cmds=$lt_finish_cmds + ++# Same as above, but a single script fragment to be evaled but not shown. ++finish_eval=$lt_finish_eval + +-fi ++# Take the output of nm and produce a listing of raw symbols and C names. ++global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + ++# Transform the output of nm in a proper C declaration ++global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + +-fi ++# Transform the output of nm in a C name address pair ++global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + +- ;; +- esac ++# This is the shared library runtime path variable. ++runpath_var=$runpath_var + +- if test "x$lt_cv_dlopen" != xno; then +- enable_dlopen=yes +- else +- enable_dlopen=no +- fi ++# This is the shared library path variable. ++shlibpath_var=$shlibpath_var + +- case $lt_cv_dlopen in +- dlopen) +- save_CPPFLAGS="$CPPFLAGS" +- test "x$ac_cv_header_dlfcn_h" = xyes && CPPFLAGS="$CPPFLAGS -DHAVE_DLFCN_H" ++# Is shlibpath searched before the hard-coded library search path? ++shlibpath_overrides_runpath=$shlibpath_overrides_runpath + +- save_LDFLAGS="$LDFLAGS" +- eval LDFLAGS=\"\$LDFLAGS $export_dynamic_flag_spec\" ++# How to hardcode a shared library path into an executable. ++hardcode_action=$hardcode_action_GCJ + +- save_LIBS="$LIBS" +- LIBS="$lt_cv_dlopen_libs $LIBS" ++# Whether we should hardcode library paths into libraries. ++hardcode_into_libs=$hardcode_into_libs + +- echo "$as_me:$LINENO: checking whether a program can dlopen itself" >&5 +-echo $ECHO_N "checking whether a program can dlopen itself... $ECHO_C" >&6 +-if test "${lt_cv_dlopen_self+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test "$cross_compiling" = yes; then : +- lt_cv_dlopen_self=cross +-else +- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 +- lt_status=$lt_dlunknown +- cat > conftest.$ac_ext < +-#endif ++# If ld is used when linking, flag to hardcode \$libdir into ++# a binary during linking. This must work even if \$libdir does ++# not exist. ++hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_GCJ + +-#include ++# Whether we need a single -rpath flag with a separated argument. ++hardcode_libdir_separator=$lt_hardcode_libdir_separator_GCJ + +-#ifdef RTLD_GLOBAL +-# define LT_DLGLOBAL RTLD_GLOBAL +-#else +-# ifdef DL_GLOBAL +-# define LT_DLGLOBAL DL_GLOBAL +-# else +-# define LT_DLGLOBAL 0 +-# endif +-#endif ++# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the ++# resulting binary. ++hardcode_direct=$hardcode_direct_GCJ + +-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we +- find out it does not work in some platform. */ +-#ifndef LT_DLLAZY_OR_NOW +-# ifdef RTLD_LAZY +-# define LT_DLLAZY_OR_NOW RTLD_LAZY +-# else +-# ifdef DL_LAZY +-# define LT_DLLAZY_OR_NOW DL_LAZY +-# else +-# ifdef RTLD_NOW +-# define LT_DLLAZY_OR_NOW RTLD_NOW +-# else +-# ifdef DL_NOW +-# define LT_DLLAZY_OR_NOW DL_NOW +-# else +-# define LT_DLLAZY_OR_NOW 0 +-# endif +-# endif +-# endif +-# endif +-#endif ++# Set to yes if using the -LDIR flag during linking hardcodes DIR into the ++# resulting binary. ++hardcode_minus_L=$hardcode_minus_L_GCJ + +-#ifdef __cplusplus +-extern "C" void exit (int); +-#endif ++# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into ++# the resulting binary. ++hardcode_shlibpath_var=$hardcode_shlibpath_var_GCJ + +-void fnord() { int i=42;} +-int main () +-{ +- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +- int status = $lt_dlunknown; ++# Set to yes if building a shared library automatically hardcodes DIR into the library ++# and all subsequent libraries and executables linked against it. ++hardcode_automatic=$hardcode_automatic_GCJ + +- if (self) +- { +- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; +- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; +- /* dlclose (self); */ +- } ++# Variables whose values should be saved in libtool wrapper scripts and ++# restored at relink time. ++variables_saved_for_relink="$variables_saved_for_relink" + +- exit (status); +-} +-EOF +- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) 2>/dev/null +- lt_status=$? +- case x$lt_status in +- x$lt_dlno_uscore) lt_cv_dlopen_self=yes ;; +- x$lt_dlneed_uscore) lt_cv_dlopen_self=yes ;; +- x$lt_unknown|x*) lt_cv_dlopen_self=no ;; +- esac +- else : +- # compilation failed +- lt_cv_dlopen_self=no +- fi +-fi +-rm -fr conftest* ++# Whether libtool must link a program against all its dependency libraries. ++link_all_deplibs=$link_all_deplibs_GCJ ++ ++# Compile-time system search path for libraries ++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec ++ ++# Run-time system search path for libraries ++sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec ++ ++# Fix the shell variable \$srcfile for the compiler. ++fix_srcfile_path="$fix_srcfile_path_GCJ" ++ ++# Set to yes if exported symbols are required. ++always_export_symbols=$always_export_symbols_GCJ ++ ++# The commands to list exported symbols. ++export_symbols_cmds=$lt_export_symbols_cmds_GCJ ++ ++# The commands to extract the exported symbol list from a shared archive. ++extract_expsyms_cmds=$lt_extract_expsyms_cmds ++ ++# Symbols that should not be listed in the preloaded symbols. ++exclude_expsyms=$lt_exclude_expsyms_GCJ ++ ++# Symbols that must always be exported. ++include_expsyms=$lt_include_expsyms_GCJ + ++# ### END LIBTOOL TAG CONFIG: $tagname ++ ++__EOF__ + +-fi +-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self" >&5 +-echo "${ECHO_T}$lt_cv_dlopen_self" >&6 + +- if test "x$lt_cv_dlopen_self" = xyes; then +- LDFLAGS="$LDFLAGS $link_static_flag" +- echo "$as_me:$LINENO: checking whether a statically linked program can dlopen itself" >&5 +-echo $ECHO_N "checking whether a statically linked program can dlopen itself... $ECHO_C" >&6 +-if test "${lt_cv_dlopen_self_static+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- if test "$cross_compiling" = yes; then : +- lt_cv_dlopen_self_static=cross + else +- lt_dlunknown=0; lt_dlno_uscore=1; lt_dlneed_uscore=2 +- lt_status=$lt_dlunknown +- cat > conftest.$ac_ext < +-#endif + +-#include ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu + +-#ifdef RTLD_GLOBAL +-# define LT_DLGLOBAL RTLD_GLOBAL +-#else +-# ifdef DL_GLOBAL +-# define LT_DLGLOBAL DL_GLOBAL +-# else +-# define LT_DLGLOBAL 0 +-# endif +-#endif ++CC="$lt_save_CC" + +-/* We may have to define LT_DLLAZY_OR_NOW in the command line if we +- find out it does not work in some platform. */ +-#ifndef LT_DLLAZY_OR_NOW +-# ifdef RTLD_LAZY +-# define LT_DLLAZY_OR_NOW RTLD_LAZY +-# else +-# ifdef DL_LAZY +-# define LT_DLLAZY_OR_NOW DL_LAZY +-# else +-# ifdef RTLD_NOW +-# define LT_DLLAZY_OR_NOW RTLD_NOW +-# else +-# ifdef DL_NOW +-# define LT_DLLAZY_OR_NOW DL_NOW +-# else +-# define LT_DLLAZY_OR_NOW 0 +-# endif +-# endif +-# endif +-# endif +-#endif ++ else ++ tagname="" ++ fi ++ ;; + +-#ifdef __cplusplus +-extern "C" void exit (int); +-#endif ++ RC) + +-void fnord() { int i=42;} +-int main () +-{ +- void *self = dlopen (0, LT_DLGLOBAL|LT_DLLAZY_OR_NOW); +- int status = $lt_dlunknown; + +- if (self) +- { +- if (dlsym (self,"fnord")) status = $lt_dlno_uscore; +- else if (dlsym( self,"_fnord")) status = $lt_dlneed_uscore; +- /* dlclose (self); */ +- } ++# Source file extension for RC test sources. ++ac_ext=rc + +- exit (status); +-} +-EOF +- if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && test -s conftest${ac_exeext} 2>/dev/null; then +- (./conftest; exit; ) 2>/dev/null +- lt_status=$? +- case x$lt_status in +- x$lt_dlno_uscore) lt_cv_dlopen_self_static=yes ;; +- x$lt_dlneed_uscore) lt_cv_dlopen_self_static=yes ;; +- x$lt_unknown|x*) lt_cv_dlopen_self_static=no ;; +- esac +- else : +- # compilation failed +- lt_cv_dlopen_self_static=no +- fi +-fi +-rm -fr conftest* ++# Object file extension for compiled RC test sources. ++objext=o ++objext_RC=$objext + ++# Code to be used in simple compile tests ++lt_simple_compile_test_code='sample MENU { MENUITEM "&Soup", 100, CHECKED }\n' + +-fi +-echo "$as_me:$LINENO: result: $lt_cv_dlopen_self_static" >&5 +-echo "${ECHO_T}$lt_cv_dlopen_self_static" >&6 +- fi ++# Code to be used in simple link tests ++lt_simple_link_test_code="$lt_simple_compile_test_code" + +- CPPFLAGS="$save_CPPFLAGS" +- LDFLAGS="$save_LDFLAGS" +- LIBS="$save_LIBS" +- ;; +- esac ++# ltmain only uses $CC for tagged configurations so make sure $CC is set. + +- case $lt_cv_dlopen_self in +- yes|no) enable_dlopen_self=$lt_cv_dlopen_self ;; +- *) enable_dlopen_self=unknown ;; +- esac ++# If no C compiler was specified, use CC. ++LTCC=${LTCC-"$CC"} + +- case $lt_cv_dlopen_self_static in +- yes|no) enable_dlopen_self_static=$lt_cv_dlopen_self_static ;; +- *) enable_dlopen_self_static=unknown ;; +- esac +-fi ++# If no C compiler flags were specified, use CFLAGS. ++LTCFLAGS=${LTCFLAGS-"$CFLAGS"} + ++# Allow CC to be a program name with arguments. ++compiler=$CC + +-if test "$enable_shared" = yes && test "$GCC" = yes; then +- case $archive_cmds in +- *'~'*) +- # FIXME: we may have to deal with multi-command sequences. +- ;; +- '$CC '*) +- # Test whether the compiler implicitly links with -lc since on some +- # systems, -lgcc has to come before -lc. If gcc already passes -lc +- # to ld, don't add -lc before -lgcc. +- echo "$as_me:$LINENO: checking whether -lc should be explicitly linked in" >&5 +-echo $ECHO_N "checking whether -lc should be explicitly linked in... $ECHO_C" >&6 +- if test "${lt_cv_archive_cmds_need_lc+set}" = set; then +- echo $ECHO_N "(cached) $ECHO_C" >&6 +-else +- $rm conftest* +- echo 'static int dummy;' > conftest.$ac_ext + +- if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; then +- soname=conftest +- lib=conftest +- libobjs=conftest.$ac_objext +- deplibs= +- wl=$lt_cv_prog_cc_wl +- compiler_flags=-v +- linker_flags=-v +- verstring= +- output_objdir=. +- libname=conftest +- save_allow_undefined_flag=$allow_undefined_flag +- allow_undefined_flag= +- if { (eval echo "$as_me:$LINENO: \"$archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1\"") >&5 +- (eval $archive_cmds 2\>\&1 \| grep \" -lc \" \>/dev/null 2\>\&1) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } +- then +- lt_cv_archive_cmds_need_lc=no +- else +- lt_cv_archive_cmds_need_lc=yes +- fi +- allow_undefined_flag=$save_allow_undefined_flag +- else +- cat conftest.err 1>&5 +- fi +-fi ++# save warnings/boilerplate of simple test code ++ac_outfile=conftest.$ac_objext ++printf "$lt_simple_compile_test_code" >conftest.$ac_ext ++eval "$ac_compile" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_compiler_boilerplate=`cat conftest.err` ++$rm conftest* ++ ++ac_outfile=conftest.$ac_objext ++printf "$lt_simple_link_test_code" >conftest.$ac_ext ++eval "$ac_link" 2>&1 >/dev/null | $SED '/^$/d; /^ *+/d' >conftest.err ++_lt_linker_boilerplate=`cat conftest.err` ++$rm conftest* + +- echo "$as_me:$LINENO: result: $lt_cv_archive_cmds_need_lc" >&5 +-echo "${ECHO_T}$lt_cv_archive_cmds_need_lc" >&6 +- ;; ++ ++# Allow CC to be a program name with arguments. ++lt_save_CC="$CC" ++CC=${RC-"windres"} ++compiler=$CC ++compiler_RC=$CC ++for cc_temp in $compiler""; do ++ case $cc_temp in ++ compile | *[\\/]compile | ccache | *[\\/]ccache ) ;; ++ distcc | *[\\/]distcc | purify | *[\\/]purify ) ;; ++ \-*) ;; ++ *) break;; + esac +-fi +-need_lc=${lt_cv_archive_cmds_need_lc-yes} ++done ++cc_basename=`$echo "X$cc_temp" | $Xsed -e 's%.*/%%' -e "s%^$host_alias-%%"` + +-# The second clause should only fire when bootstrapping the ++lt_cv_prog_compiler_c_o_RC=yes ++ ++# The else clause should only fire when bootstrapping the + # libtool distribution, otherwise you forgot to ship ltmain.sh + # with your package, and you will get complaints that there are + # no rules to generate ltmain.sh. + if test -f "$ltmain"; then +- : +-else +- # If there is no Makefile yet, we rely on a make rule to execute +- # `config.status --recheck' to rerun these tests and create the +- # libtool script then. +- test -f Makefile && make "$ltmain" +-fi +- +-if test -f "$ltmain"; then +- trap "$rm \"${ofile}T\"; exit 1" 1 2 15 +- $rm -f "${ofile}T" +- +- echo creating $ofile +- ++ # See if we are running on zsh, and set the options which allow our commands through ++ # without removal of \ escapes. ++ if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++ fi + # Now quote all the things that may contain metacharacters while being + # careful not to overquote the AC_SUBSTed values. We take copies of the + # variables and quote the copies for generation of the libtool script. +- for var in echo old_CC old_CFLAGS SED \ +- AR AR_FLAGS CC LD LN_S NM SHELL \ +- reload_flag reload_cmds wl \ +- pic_flag link_static_flag no_builtin_flag export_dynamic_flag_spec \ +- thread_safe_flag_spec whole_archive_flag_spec libname_spec \ +- library_names_spec soname_spec \ +- RANLIB old_archive_cmds old_archive_from_new_cmds old_postinstall_cmds \ +- old_postuninstall_cmds archive_cmds archive_expsym_cmds postinstall_cmds \ +- postuninstall_cmds extract_expsyms_cmds old_archive_from_expsyms_cmds \ +- old_striplib striplib file_magic_cmd export_symbols_cmds \ +- deplibs_check_method allow_undefined_flag no_undefined_flag \ +- finish_cmds finish_eval global_symbol_pipe global_symbol_to_cdecl \ +- global_symbol_to_c_name_address \ +- hardcode_libdir_flag_spec hardcode_libdir_separator \ ++ for var in echo old_CC old_CFLAGS AR AR_FLAGS EGREP RANLIB LN_S LTCC LTCFLAGS NM \ ++ SED SHELL STRIP \ ++ libname_spec library_names_spec soname_spec extract_expsyms_cmds \ ++ old_striplib striplib file_magic_cmd finish_cmds finish_eval \ ++ deplibs_check_method reload_flag reload_cmds need_locks \ ++ lt_cv_sys_global_symbol_pipe lt_cv_sys_global_symbol_to_cdecl \ ++ lt_cv_sys_global_symbol_to_c_name_address \ + sys_lib_search_path_spec sys_lib_dlsearch_path_spec \ +- compiler_c_o compiler_o_lo need_locks exclude_expsyms include_expsyms; do ++ old_postinstall_cmds old_postuninstall_cmds \ ++ compiler_RC \ ++ CC_RC \ ++ LD_RC \ ++ lt_prog_compiler_wl_RC \ ++ lt_prog_compiler_pic_RC \ ++ lt_prog_compiler_static_RC \ ++ lt_prog_compiler_no_builtin_flag_RC \ ++ export_dynamic_flag_spec_RC \ ++ thread_safe_flag_spec_RC \ ++ whole_archive_flag_spec_RC \ ++ enable_shared_with_static_runtimes_RC \ ++ old_archive_cmds_RC \ ++ old_archive_from_new_cmds_RC \ ++ predep_objects_RC \ ++ postdep_objects_RC \ ++ predeps_RC \ ++ postdeps_RC \ ++ compiler_lib_search_path_RC \ ++ archive_cmds_RC \ ++ archive_expsym_cmds_RC \ ++ postinstall_cmds_RC \ ++ postuninstall_cmds_RC \ ++ old_archive_from_expsyms_cmds_RC \ ++ allow_undefined_flag_RC \ ++ no_undefined_flag_RC \ ++ export_symbols_cmds_RC \ ++ hardcode_libdir_flag_spec_RC \ ++ hardcode_libdir_flag_spec_ld_RC \ ++ hardcode_libdir_separator_RC \ ++ hardcode_automatic_RC \ ++ module_cmds_RC \ ++ module_expsym_cmds_RC \ ++ lt_cv_prog_compiler_c_o_RC \ ++ exclude_expsyms_RC \ ++ include_expsyms_RC; do + + case $var in +- reload_cmds | old_archive_cmds | old_archive_from_new_cmds | \ +- old_postinstall_cmds | old_postuninstall_cmds | \ +- export_symbols_cmds | archive_cmds | archive_expsym_cmds | \ +- extract_expsyms_cmds | old_archive_from_expsyms_cmds | \ ++ old_archive_cmds_RC | \ ++ old_archive_from_new_cmds_RC | \ ++ archive_cmds_RC | \ ++ archive_expsym_cmds_RC | \ ++ module_cmds_RC | \ ++ module_expsym_cmds_RC | \ ++ old_archive_from_expsyms_cmds_RC | \ ++ export_symbols_cmds_RC | \ ++ extract_expsyms_cmds | reload_cmds | finish_cmds | \ + postinstall_cmds | postuninstall_cmds | \ +- finish_cmds | sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) ++ old_postinstall_cmds | old_postuninstall_cmds | \ ++ sys_lib_search_path_spec | sys_lib_dlsearch_path_spec) + # Double-quote double-evaled strings. + eval "lt_$var=\\\"\`\$echo \"X\$$var\" | \$Xsed -e \"\$double_quote_subst\" -e \"\$sed_quote_subst\" -e \"\$delay_variable_subst\"\`\\\"" + ;; +@@ -7691,46 +19099,16 @@ + esac + done + +- cat <<__EOF__ > "${ofile}T" +-#! $SHELL +- +-# `$echo "$ofile" | sed 's%^.*/%%'` - Provide generalized library-building support services. +-# Generated automatically by $PROGRAM (GNU $PACKAGE $VERSION$TIMESTAMP) +-# NOTE: Changes made to this file will be lost: look at ltmain.sh. +-# +-# Copyright (C) 1996-2000 Free Software Foundation, Inc. +-# Originally by Gordon Matzigkeit , 1996 +-# +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2 of the License, or +-# (at your option) any later version. +-# +-# This program is distributed in the hope that it will be useful, but +-# WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU +-# General Public License for more details. +-# +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +-# +-# As a special exception to the GNU General Public License, if you +-# distribute this file as part of a program that contains a +-# configuration script generated by Autoconf, you may include it under +-# the same distribution terms that you use for the rest of that program. +- +-# A sed that does not truncate output. +-SED=$lt_SED +- +-# Sed that helps us avoid accidentally triggering echo(1) options like -n. +-Xsed="${SED} -e s/^X//" ++ case $lt_echo in ++ *'\$0 --fallback-echo"') ++ lt_echo=`$echo "X$lt_echo" | $Xsed -e 's/\\\\\\\$0 --fallback-echo"$/$0 --fallback-echo"/'` ++ ;; ++ esac + +-# The HP-UX ksh and POSIX shell print the target directory to stdout +-# if CDPATH is set. +-if test "X\${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi ++cfgfile="$ofile" + +-# ### BEGIN LIBTOOL CONFIG ++ cat <<__EOF__ >> "$cfgfile" ++# ### BEGIN LIBTOOL TAG CONFIG: $tagname + + # Libtool was configured on host `(hostname || uname -n) 2>/dev/null | sed 1q`: + +@@ -7744,7 +19122,10 @@ + build_old_libs=$enable_static + + # Whether or not to add -lc for building shared libraries. +-build_libtool_need_lc=$need_lc ++build_libtool_need_lc=$archive_cmds_need_lc_RC ++ ++# Whether or not to disallow shared libs when runtime libs are static ++allow_libtool_libs_with_static_runtimes=$enable_shared_with_static_runtimes_RC + + # Whether or not to optimize for fast installation. + fast_install=$enable_fast_install +@@ -7752,6 +19133,12 @@ + # The host system. + host_alias=$host_alias + host=$host ++host_os=$host_os ++ ++# The build system. ++build_alias=$build_alias ++build=$build ++build_os=$build_os + + # An echo program that does not interpret backslashes. + echo=$lt_echo +@@ -7760,14 +19147,23 @@ + AR=$lt_AR + AR_FLAGS=$lt_AR_FLAGS + +-# The default C compiler. +-CC=$lt_CC ++# A C compiler. ++LTCC=$lt_LTCC ++ ++# LTCC compiler flags. ++LTCFLAGS=$lt_LTCFLAGS ++ ++# A language-specific compiler. ++CC=$lt_compiler_RC + + # Is the compiler the GNU C compiler? +-with_gcc=$GCC ++with_gcc=$GCC_RC ++ ++# An ERE matcher. ++EGREP=$lt_EGREP + + # The linker used to build libraries. +-LD=$lt_LD ++LD=$lt_LD_RC + + # Whether we need hard or soft links. + LN_S=$lt_LN_S +@@ -7776,7 +19172,7 @@ + NM=$lt_NM + + # A symbol stripping program +-STRIP=$STRIP ++STRIP=$lt_STRIP + + # Used to examine libraries when file_magic_cmd begins "file" + MAGIC_CMD=$MAGIC_CMD +@@ -7798,7 +19194,7 @@ + reload_cmds=$lt_reload_cmds + + # How to pass a linker flag through the compiler. +-wl=$lt_wl ++wl=$lt_lt_prog_compiler_wl_RC + + # Object file suffix (normally "o"). + objext="$ac_objext" +@@ -7806,20 +19202,23 @@ + # Old archive suffix (normally "a"). + libext="$libext" + ++# Shared library suffix (normally ".so"). ++shrext_cmds='$shrext_cmds' ++ + # Executable file suffix (normally ""). + exeext="$exeext" + + # Additional compiler flags for building library objects. +-pic_flag=$lt_pic_flag ++pic_flag=$lt_lt_prog_compiler_pic_RC + pic_mode=$pic_mode + +-# Does compiler simultaneously support -c and -o options? +-compiler_c_o=$lt_compiler_c_o ++# What is the maximum length of a command? ++max_cmd_len=$lt_cv_sys_max_cmd_len + +-# Can we write directly to a .lo ? +-compiler_o_lo=$lt_compiler_o_lo ++# Does compiler simultaneously support -c and -o options? ++compiler_c_o=$lt_lt_cv_prog_compiler_c_o_RC + +-# Must we lock files when doing compilation ? ++# Must we lock files when doing compilation? + need_locks=$lt_need_locks + + # Do we need the lib prefix for modules? +@@ -7838,19 +19237,19 @@ + dlopen_self_static=$enable_dlopen_self_static + + # Compiler flag to prevent dynamic linking. +-link_static_flag=$lt_link_static_flag ++link_static_flag=$lt_lt_prog_compiler_static_RC + + # Compiler flag to turn off builtin functions. +-no_builtin_flag=$lt_no_builtin_flag ++no_builtin_flag=$lt_lt_prog_compiler_no_builtin_flag_RC + + # Compiler flag to allow reflexive dlopens. +-export_dynamic_flag_spec=$lt_export_dynamic_flag_spec ++export_dynamic_flag_spec=$lt_export_dynamic_flag_spec_RC + + # Compiler flag to generate shared objects directly from archives. +-whole_archive_flag_spec=$lt_whole_archive_flag_spec ++whole_archive_flag_spec=$lt_whole_archive_flag_spec_RC + + # Compiler flag to generate thread-safe objects. +-thread_safe_flag_spec=$lt_thread_safe_flag_spec ++thread_safe_flag_spec=$lt_thread_safe_flag_spec_RC + + # Library versioning type. + version_type=$version_type +@@ -7867,26 +19266,50 @@ + + # Commands used to build and install an old-style archive. + RANLIB=$lt_RANLIB +-old_archive_cmds=$lt_old_archive_cmds ++old_archive_cmds=$lt_old_archive_cmds_RC + old_postinstall_cmds=$lt_old_postinstall_cmds + old_postuninstall_cmds=$lt_old_postuninstall_cmds + + # Create an old-style archive from a shared archive. +-old_archive_from_new_cmds=$lt_old_archive_from_new_cmds ++old_archive_from_new_cmds=$lt_old_archive_from_new_cmds_RC + + # Create a temporary old-style archive to link instead of a shared archive. +-old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds ++old_archive_from_expsyms_cmds=$lt_old_archive_from_expsyms_cmds_RC + + # Commands used to build and install a shared archive. +-archive_cmds=$lt_archive_cmds +-archive_expsym_cmds=$lt_archive_expsym_cmds ++archive_cmds=$lt_archive_cmds_RC ++archive_expsym_cmds=$lt_archive_expsym_cmds_RC + postinstall_cmds=$lt_postinstall_cmds + postuninstall_cmds=$lt_postuninstall_cmds + ++# Commands used to build a loadable module (assumed same as above if empty) ++module_cmds=$lt_module_cmds_RC ++module_expsym_cmds=$lt_module_expsym_cmds_RC ++ + # Commands to strip libraries. + old_striplib=$lt_old_striplib + striplib=$lt_striplib + ++# Dependencies to place before the objects being linked to create a ++# shared library. ++predep_objects=$lt_predep_objects_RC ++ ++# Dependencies to place after the objects being linked to create a ++# shared library. ++postdep_objects=$lt_postdep_objects_RC ++ ++# Dependencies to place before the objects being linked to create a ++# shared library. ++predeps=$lt_predeps_RC ++ ++# Dependencies to place after the objects being linked to create a ++# shared library. ++postdeps=$lt_postdeps_RC ++ ++# The library search path used internally by the compiler when linking ++# a shared library. ++compiler_lib_search_path=$lt_compiler_lib_search_path_RC ++ + # Method to check whether dependent libraries are shared objects. + deplibs_check_method=$lt_deplibs_check_method + +@@ -7894,10 +19317,10 @@ + file_magic_cmd=$lt_file_magic_cmd + + # Flag that allows shared libraries with undefined symbols to be built. +-allow_undefined_flag=$lt_allow_undefined_flag ++allow_undefined_flag=$lt_allow_undefined_flag_RC + + # Flag that forces no undefined symbols. +-no_undefined_flag=$lt_no_undefined_flag ++no_undefined_flag=$lt_no_undefined_flag_RC + + # Commands used to finish a libtool library installation in a directory. + finish_cmds=$lt_finish_cmds +@@ -7906,13 +19329,13 @@ + finish_eval=$lt_finish_eval + + # Take the output of nm and produce a listing of raw symbols and C names. +-global_symbol_pipe=$lt_global_symbol_pipe ++global_symbol_pipe=$lt_lt_cv_sys_global_symbol_pipe + + # Transform the output of nm in a proper C declaration +-global_symbol_to_cdecl=$lt_global_symbol_to_cdecl ++global_symbol_to_cdecl=$lt_lt_cv_sys_global_symbol_to_cdecl + + # Transform the output of nm in a C name address pair +-global_symbol_to_c_name_address=$lt_global_symbol_to_c_name_address ++global_symbol_to_c_name_address=$lt_lt_cv_sys_global_symbol_to_c_name_address + + # This is the shared library runtime path variable. + runpath_var=$runpath_var +@@ -7924,290 +19347,158 @@ + shlibpath_overrides_runpath=$shlibpath_overrides_runpath + + # How to hardcode a shared library path into an executable. +-hardcode_action=$hardcode_action ++hardcode_action=$hardcode_action_RC + + # Whether we should hardcode library paths into libraries. + hardcode_into_libs=$hardcode_into_libs + + # Flag to hardcode \$libdir into a binary during linking. + # This must work even if \$libdir does not exist. +-hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec ++hardcode_libdir_flag_spec=$lt_hardcode_libdir_flag_spec_RC ++ ++# If ld is used when linking, flag to hardcode \$libdir into ++# a binary during linking. This must work even if \$libdir does ++# not exist. ++hardcode_libdir_flag_spec_ld=$lt_hardcode_libdir_flag_spec_ld_RC + + # Whether we need a single -rpath flag with a separated argument. +-hardcode_libdir_separator=$lt_hardcode_libdir_separator ++hardcode_libdir_separator=$lt_hardcode_libdir_separator_RC + +-# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the ++# Set to yes if using DIR/libNAME${shared_ext} during linking hardcodes DIR into the + # resulting binary. +-hardcode_direct=$hardcode_direct ++hardcode_direct=$hardcode_direct_RC + + # Set to yes if using the -LDIR flag during linking hardcodes DIR into the + # resulting binary. +-hardcode_minus_L=$hardcode_minus_L ++hardcode_minus_L=$hardcode_minus_L_RC + + # Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into + # the resulting binary. +-hardcode_shlibpath_var=$hardcode_shlibpath_var ++hardcode_shlibpath_var=$hardcode_shlibpath_var_RC ++ ++# Set to yes if building a shared library automatically hardcodes DIR into the library ++# and all subsequent libraries and executables linked against it. ++hardcode_automatic=$hardcode_automatic_RC + + # Variables whose values should be saved in libtool wrapper scripts and + # restored at relink time. + variables_saved_for_relink="$variables_saved_for_relink" + +-# Whether libtool must link a program against all its dependency libraries. +-link_all_deplibs=$link_all_deplibs ++# Whether libtool must link a program against all its dependency libraries. ++link_all_deplibs=$link_all_deplibs_RC ++ ++# Compile-time system search path for libraries ++sys_lib_search_path_spec=$lt_sys_lib_search_path_spec ++ ++# Run-time system search path for libraries ++sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec ++ ++# Fix the shell variable \$srcfile for the compiler. ++fix_srcfile_path="$fix_srcfile_path_RC" ++ ++# Set to yes if exported symbols are required. ++always_export_symbols=$always_export_symbols_RC ++ ++# The commands to list exported symbols. ++export_symbols_cmds=$lt_export_symbols_cmds_RC ++ ++# The commands to extract the exported symbol list from a shared archive. ++extract_expsyms_cmds=$lt_extract_expsyms_cmds ++ ++# Symbols that should not be listed in the preloaded symbols. ++exclude_expsyms=$lt_exclude_expsyms_RC ++ ++# Symbols that must always be exported. ++include_expsyms=$lt_include_expsyms_RC ++ ++# ### END LIBTOOL TAG CONFIG: $tagname ++ ++__EOF__ ++ ++ ++else ++ # If there is no Makefile yet, we rely on a make rule to execute ++ # `config.status --recheck' to rerun these tests and create the ++ # libtool script then. ++ ltmain_in=`echo $ltmain | sed -e 's/\.sh$/.in/'` ++ if test -f "$ltmain_in"; then ++ test -f Makefile && make "$ltmain" ++ fi ++fi ++ ++ ++ac_ext=c ++ac_cpp='$CPP $CPPFLAGS' ++ac_compile='$CC -c $CFLAGS $CPPFLAGS conftest.$ac_ext >&5' ++ac_link='$CC -o conftest$ac_exeext $CFLAGS $CPPFLAGS $LDFLAGS conftest.$ac_ext $LIBS >&5' ++ac_compiler_gnu=$ac_cv_c_compiler_gnu ++ ++CC="$lt_save_CC" ++ ++ ;; ++ ++ *) ++ { { echo "$as_me:$LINENO: error: Unsupported tag name: $tagname" >&5 ++echo "$as_me: error: Unsupported tag name: $tagname" >&2;} ++ { (exit 1); exit 1; }; } ++ ;; ++ esac ++ ++ # Append the new tag name to the list of available tags. ++ if test -n "$tagname" ; then ++ available_tags="$available_tags $tagname" ++ fi ++ fi ++ done ++ IFS="$lt_save_ifs" ++ ++ # Now substitute the updated list of available tags. ++ if eval "sed -e 's/^available_tags=.*\$/available_tags=\"$available_tags\"/' \"$ofile\" > \"${ofile}T\""; then ++ mv "${ofile}T" "$ofile" ++ chmod +x "$ofile" ++ else ++ rm -f "${ofile}T" ++ { { echo "$as_me:$LINENO: error: unable to update list of available tagged configurations." >&5 ++echo "$as_me: error: unable to update list of available tagged configurations." >&2;} ++ { (exit 1); exit 1; }; } ++ fi ++fi + +-# Compile-time system search path for libraries +-sys_lib_search_path_spec=$lt_sys_lib_search_path_spec + +-# Run-time system search path for libraries +-sys_lib_dlsearch_path_spec=$lt_sys_lib_dlsearch_path_spec + +-# Fix the shell variable \$srcfile for the compiler. +-fix_srcfile_path="$fix_srcfile_path" ++# This can be used to rebuild libtool when needed ++LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" + +-# Set to yes if exported symbols are required. +-always_export_symbols=$always_export_symbols ++# Always use our own libtool. ++LIBTOOL='$(SHELL) $(top_builddir)/libtool' + +-# The commands to list exported symbols. +-export_symbols_cmds=$lt_export_symbols_cmds ++# Prevent multiple expansion + +-# The commands to extract the exported symbol list from a shared archive. +-extract_expsyms_cmds=$lt_extract_expsyms_cmds + +-# Symbols that should not be listed in the preloaded symbols. +-exclude_expsyms=$lt_exclude_expsyms + +-# Symbols that must always be exported. +-include_expsyms=$lt_include_expsyms + +-# ### END LIBTOOL CONFIG + +-__EOF__ + +- case $host_os in +- aix3*) +- cat <<\EOF >> "${ofile}T" + +-# AIX sometimes has problems with the GCC collect2 program. For some +-# reason, if we set the COLLECT_NAMES environment variable, the problems +-# vanish in a puff of smoke. +-if test "X${COLLECT_NAMES+set}" != Xset; then +- COLLECT_NAMES= +- export COLLECT_NAMES +-fi +-EOF +- ;; +- esac + +- case $host_os in +- cygwin* | mingw* | pw32* | os2*) +- cat <<'EOF' >> "${ofile}T" +- # This is a source program that is used to create dlls on Windows +- # Don't remove nor modify the starting and closing comments +-# /* ltdll.c starts here */ +-# #define WIN32_LEAN_AND_MEAN +-# #include +-# #undef WIN32_LEAN_AND_MEAN +-# #include +-# +-# #ifndef __CYGWIN__ +-# # ifdef __CYGWIN32__ +-# # define __CYGWIN__ __CYGWIN32__ +-# # endif +-# #endif +-# +-# #ifdef __cplusplus +-# extern "C" { +-# #endif +-# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); +-# #ifdef __cplusplus +-# } +-# #endif +-# +-# #ifdef __CYGWIN__ +-# #include +-# DECLARE_CYGWIN_DLL( DllMain ); +-# #endif +-# HINSTANCE __hDllInstance_base; +-# +-# BOOL APIENTRY +-# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) +-# { +-# __hDllInstance_base = hInst; +-# return TRUE; +-# } +-# /* ltdll.c ends here */ +- # This is a source program that is used to create import libraries +- # on Windows for dlls which lack them. Don't remove nor modify the +- # starting and closing comments +-# /* impgen.c starts here */ +-# /* Copyright (C) 1999-2000 Free Software Foundation, Inc. +-# +-# This file is part of GNU libtool. +-# +-# This program is free software; you can redistribute it and/or modify +-# it under the terms of the GNU General Public License as published by +-# the Free Software Foundation; either version 2 of the License, or +-# (at your option) any later version. +-# +-# This program is distributed in the hope that it will be useful, +-# but WITHOUT ANY WARRANTY; without even the implied warranty of +-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +-# GNU General Public License for more details. +-# +-# You should have received a copy of the GNU General Public License +-# along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. +-# */ +-# +-# #include /* for printf() */ +-# #include /* for open(), lseek(), read() */ +-# #include /* for O_RDONLY, O_BINARY */ +-# #include /* for strdup() */ +-# +-# /* O_BINARY isn't required (or even defined sometimes) under Unix */ +-# #ifndef O_BINARY +-# #define O_BINARY 0 +-# #endif +-# +-# static unsigned int +-# pe_get16 (fd, offset) +-# int fd; +-# int offset; +-# { +-# unsigned char b[2]; +-# lseek (fd, offset, SEEK_SET); +-# read (fd, b, 2); +-# return b[0] + (b[1]<<8); +-# } +-# +-# static unsigned int +-# pe_get32 (fd, offset) +-# int fd; +-# int offset; +-# { +-# unsigned char b[4]; +-# lseek (fd, offset, SEEK_SET); +-# read (fd, b, 4); +-# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); +-# } +-# +-# static unsigned int +-# pe_as32 (ptr) +-# void *ptr; +-# { +-# unsigned char *b = ptr; +-# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); +-# } +-# +-# int +-# main (argc, argv) +-# int argc; +-# char *argv[]; +-# { +-# int dll; +-# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; +-# unsigned long export_rva, export_size, nsections, secptr, expptr; +-# unsigned long name_rvas, nexp; +-# unsigned char *expdata, *erva; +-# char *filename, *dll_name; +-# +-# filename = argv[1]; +-# +-# dll = open(filename, O_RDONLY|O_BINARY); +-# if (dll < 1) +-# return 1; +-# +-# dll_name = filename; +-# +-# for (i=0; filename[i]; i++) +-# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') +-# dll_name = filename + i +1; +-# +-# pe_header_offset = pe_get32 (dll, 0x3c); +-# opthdr_ofs = pe_header_offset + 4 + 20; +-# num_entries = pe_get32 (dll, opthdr_ofs + 92); +-# +-# if (num_entries < 1) /* no exports */ +-# return 1; +-# +-# export_rva = pe_get32 (dll, opthdr_ofs + 96); +-# export_size = pe_get32 (dll, opthdr_ofs + 100); +-# nsections = pe_get16 (dll, pe_header_offset + 4 +2); +-# secptr = (pe_header_offset + 4 + 20 + +-# pe_get16 (dll, pe_header_offset + 4 + 16)); +-# +-# expptr = 0; +-# for (i = 0; i < nsections; i++) +-# { +-# char sname[8]; +-# unsigned long secptr1 = secptr + 40 * i; +-# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); +-# unsigned long vsize = pe_get32 (dll, secptr1 + 16); +-# unsigned long fptr = pe_get32 (dll, secptr1 + 20); +-# lseek(dll, secptr1, SEEK_SET); +-# read(dll, sname, 8); +-# if (vaddr <= export_rva && vaddr+vsize > export_rva) +-# { +-# expptr = fptr + (export_rva - vaddr); +-# if (export_rva + export_size > vaddr + vsize) +-# export_size = vsize - (export_rva - vaddr); +-# break; +-# } +-# } +-# +-# expdata = (unsigned char*)malloc(export_size); +-# lseek (dll, expptr, SEEK_SET); +-# read (dll, expdata, export_size); +-# erva = expdata - export_rva; +-# +-# nexp = pe_as32 (expdata+24); +-# name_rvas = pe_as32 (expdata+32); +-# +-# printf ("EXPORTS\n"); +-# for (i = 0; i> "${ofile}T" || (rm -f "${ofile}T"; exit 1) + +- mv -f "${ofile}T" "$ofile" || \ +- (rm -f "$ofile" && cp "${ofile}T" "$ofile" && rm -f "${ofile}T") +- chmod +x "$ofile" +-fi + + + + + +-# This can be used to rebuild libtool when needed +-LIBTOOL_DEPS="$ac_aux_dir/ltmain.sh" + +-# Always use our own libtool. +-LIBTOOL='$(SHELL) $(top_builddir)/libtool' + +-# Prevent multiple expansion + + + + + # Extract the first word of "perl", so it can be a program name with args. + set dummy perl; ac_word=$2 +-echo "$as_me:$LINENO: checking for $ac_word" >&5 +-echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for $ac_word" >&5 ++echo $ECHO_N "checking for $ac_word... $ECHO_C" >&6; } + if test "${ac_cv_path_PERL+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -8222,42 +19513,43 @@ + IFS=$as_save_IFS + test -z "$as_dir" && as_dir=. + for ac_exec_ext in '' $ac_executable_extensions; do +- if $as_executable_p "$as_dir/$ac_word$ac_exec_ext"; then ++ if { test -f "$as_dir/$ac_word$ac_exec_ext" && $as_test_x "$as_dir/$ac_word$ac_exec_ext"; }; then + ac_cv_path_PERL="$as_dir/$ac_word$ac_exec_ext" + echo "$as_me:$LINENO: found $as_dir/$ac_word$ac_exec_ext" >&5 + break 2 + fi + done + done ++IFS=$as_save_IFS + + ;; + esac + fi + PERL=$ac_cv_path_PERL +- + if test -n "$PERL"; then +- echo "$as_me:$LINENO: result: $PERL" >&5 +-echo "${ECHO_T}$PERL" >&6 ++ { echo "$as_me:$LINENO: result: $PERL" >&5 ++echo "${ECHO_T}$PERL" >&6; } + else +- echo "$as_me:$LINENO: result: no" >&5 +-echo "${ECHO_T}no" >&6 ++ { echo "$as_me:$LINENO: result: no" >&5 ++echo "${ECHO_T}no" >&6; } + fi + + + + ++ + if test "${ac_cv_header_asm_errno_h+set}" = set; then +- echo "$as_me:$LINENO: checking for asm/errno.h" >&5 +-echo $ECHO_N "checking for asm/errno.h... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for asm/errno.h" >&5 ++echo $ECHO_N "checking for asm/errno.h... $ECHO_C" >&6; } + if test "${ac_cv_header_asm_errno_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_asm_errno_h" >&5 +-echo "${ECHO_T}$ac_cv_header_asm_errno_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_asm_errno_h" >&5 ++echo "${ECHO_T}$ac_cv_header_asm_errno_h" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking asm/errno.h usability" >&5 +-echo $ECHO_N "checking asm/errno.h usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking asm/errno.h usability" >&5 ++echo $ECHO_N "checking asm/errno.h usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -8268,40 +19560,37 @@ + #include + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking asm/errno.h presence" >&5 +-echo $ECHO_N "checking asm/errno.h presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking asm/errno.h presence" >&5 ++echo $ECHO_N "checking asm/errno.h presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -8310,24 +19599,22 @@ + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 +@@ -8335,9 +19622,10 @@ + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -8361,25 +19649,18 @@ + echo "$as_me: WARNING: asm/errno.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: asm/errno.h: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: asm/errno.h: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## ------------------------------------------ ## +-## Report this to the AC_PACKAGE_NAME lists. ## +-## ------------------------------------------ ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for asm/errno.h" >&5 +-echo $ECHO_N "checking for asm/errno.h... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for asm/errno.h" >&5 ++echo $ECHO_N "checking for asm/errno.h... $ECHO_C" >&6; } + if test "${ac_cv_header_asm_errno_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_cv_header_asm_errno_h=$ac_header_preproc + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_asm_errno_h" >&5 +-echo "${ECHO_T}$ac_cv_header_asm_errno_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_asm_errno_h" >&5 ++echo "${ECHO_T}$ac_cv_header_asm_errno_h" >&6; } + + fi + if test $ac_cv_header_asm_errno_h = yes; then +@@ -8394,17 +19675,17 @@ + + + if test "${ac_cv_header_linux_atmsap_h+set}" = set; then +- echo "$as_me:$LINENO: checking for linux/atmsap.h" >&5 +-echo $ECHO_N "checking for linux/atmsap.h... $ECHO_C" >&6 ++ { echo "$as_me:$LINENO: checking for linux/atmsap.h" >&5 ++echo $ECHO_N "checking for linux/atmsap.h... $ECHO_C" >&6; } + if test "${ac_cv_header_linux_atmsap_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_linux_atmsap_h" >&5 +-echo "${ECHO_T}$ac_cv_header_linux_atmsap_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_linux_atmsap_h" >&5 ++echo "${ECHO_T}$ac_cv_header_linux_atmsap_h" >&6; } + else + # Is the header compilable? +-echo "$as_me:$LINENO: checking linux/atmsap.h usability" >&5 +-echo $ECHO_N "checking linux/atmsap.h usability... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking linux/atmsap.h usability" >&5 ++echo $ECHO_N "checking linux/atmsap.h usability... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -8415,40 +19696,37 @@ + #include + _ACEOF + rm -f conftest.$ac_objext +-if { (eval echo "$as_me:$LINENO: \"$ac_compile\"") >&5 +- (eval $ac_compile) 2>conftest.er1 ++if { (ac_try="$ac_compile" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_compile") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest.$ac_objext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest.$ac_objext; then + ac_header_compiler=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_header_compiler=no ++ ac_header_compiler=no + fi +-rm -f conftest.err conftest.$ac_objext conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 +-echo "${ECHO_T}$ac_header_compiler" >&6 ++ ++rm -f core conftest.err conftest.$ac_objext conftest.$ac_ext ++{ echo "$as_me:$LINENO: result: $ac_header_compiler" >&5 ++echo "${ECHO_T}$ac_header_compiler" >&6; } + + # Is the header present? +-echo "$as_me:$LINENO: checking linux/atmsap.h presence" >&5 +-echo $ECHO_N "checking linux/atmsap.h presence... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking linux/atmsap.h presence" >&5 ++echo $ECHO_N "checking linux/atmsap.h presence... $ECHO_C" >&6; } + cat >conftest.$ac_ext <<_ACEOF + /* confdefs.h. */ + _ACEOF +@@ -8457,24 +19735,22 @@ + /* end confdefs.h. */ + #include + _ACEOF +-if { (eval echo "$as_me:$LINENO: \"$ac_cpp conftest.$ac_ext\"") >&5 +- (eval $ac_cpp conftest.$ac_ext) 2>conftest.er1 ++if { (ac_try="$ac_cpp conftest.$ac_ext" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_cpp conftest.$ac_ext") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } >/dev/null; then +- if test -s conftest.err; then +- ac_cpp_err=$ac_c_preproc_warn_flag +- ac_cpp_err=$ac_cpp_err$ac_c_werror_flag +- else +- ac_cpp_err= +- fi +-else +- ac_cpp_err=yes +-fi +-if test -z "$ac_cpp_err"; then ++ (exit $ac_status); } >/dev/null && { ++ test -z "$ac_c_preproc_warn_flag$ac_c_werror_flag" || ++ test ! -s conftest.err ++ }; then + ac_header_preproc=yes + else + echo "$as_me: failed program was:" >&5 +@@ -8482,9 +19758,10 @@ + + ac_header_preproc=no + fi ++ + rm -f conftest.err conftest.$ac_ext +-echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 +-echo "${ECHO_T}$ac_header_preproc" >&6 ++{ echo "$as_me:$LINENO: result: $ac_header_preproc" >&5 ++echo "${ECHO_T}$ac_header_preproc" >&6; } + + # So? What about this header? + case $ac_header_compiler:$ac_header_preproc:$ac_c_preproc_warn_flag in +@@ -8508,25 +19785,18 @@ + echo "$as_me: WARNING: linux/atmsap.h: proceeding with the preprocessor's result" >&2;} + { echo "$as_me:$LINENO: WARNING: linux/atmsap.h: in the future, the compiler will take precedence" >&5 + echo "$as_me: WARNING: linux/atmsap.h: in the future, the compiler will take precedence" >&2;} +- ( +- cat <<\_ASBOX +-## ------------------------------------------ ## +-## Report this to the AC_PACKAGE_NAME lists. ## +-## ------------------------------------------ ## +-_ASBOX +- ) | +- sed "s/^/$as_me: WARNING: /" >&2 ++ + ;; + esac +-echo "$as_me:$LINENO: checking for linux/atmsap.h" >&5 +-echo $ECHO_N "checking for linux/atmsap.h... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for linux/atmsap.h" >&5 ++echo $ECHO_N "checking for linux/atmsap.h... $ECHO_C" >&6; } + if test "${ac_cv_header_linux_atmsap_h+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else + ac_cv_header_linux_atmsap_h=$ac_header_preproc + fi +-echo "$as_me:$LINENO: result: $ac_cv_header_linux_atmsap_h" >&5 +-echo "${ECHO_T}$ac_cv_header_linux_atmsap_h" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_header_linux_atmsap_h" >&5 ++echo "${ECHO_T}$ac_cv_header_linux_atmsap_h" >&6; } + + fi + if test $ac_cv_header_linux_atmsap_h = yes; then +@@ -8541,8 +19811,8 @@ + + + +-echo "$as_me:$LINENO: checking for main in -lresolv" >&5 +-echo $ECHO_N "checking for main in -lresolv... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for main in -lresolv" >&5 ++echo $ECHO_N "checking for main in -lresolv... $ECHO_C" >&6; } + if test "${ac_cv_lib_resolv_main+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -8559,45 +19829,43 @@ + int + main () + { +-main (); ++return main (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_resolv_main=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_resolv_main=no ++ ac_cv_lib_resolv_main=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_resolv_main" >&5 +-echo "${ECHO_T}$ac_cv_lib_resolv_main" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_resolv_main" >&5 ++echo "${ECHO_T}$ac_cv_lib_resolv_main" >&6; } + if test $ac_cv_lib_resolv_main = yes; then + cat >>confdefs.h <<_ACEOF + #define HAVE_LIBRESOLV 1 +@@ -8633,10 +19901,9 @@ + + + +-# Check whether --with-uni or --without-uni was given. ++# Check whether --with-uni was given. + if test "${with_uni+set}" = set; then +- withval="$with_uni" +- ++ withval=$with_uni; + case "$with_uni" in + "3.0" ) cat >>confdefs.h <<\_ACEOF + #define UNI30 1 +@@ -8668,12 +19935,12 @@ + _ACEOF + + +-fi; ++fi + +-# Check whether --enable-allow_uni30 or --disable-allow_uni30 was given. +-if test "${enable_allow_uni30+set}" = set; then +- enableval="$enable_allow_uni30" + ++# Check whether --enable-allow_uni30 was given. ++if test "${enable_allow_uni30+set}" = set; then ++ enableval=$enable_allow_uni30; + if test "$with_uni" = "3.1" ; then + cat >>confdefs.h <<\_ACEOF + #define ALLOW_UNI30 1 +@@ -8685,12 +19952,12 @@ + fi + + +-fi; ++fi ++ + +-# Check whether --enable-q2963_1 or --disable-q2963_1 was given. ++# Check whether --enable-q2963_1 was given. + if test "${enable_q2963_1+set}" = set; then +- enableval="$enable_q2963_1" +- ++ enableval=$enable_q2963_1; + if test "$with_uni" = "4.0" ; then + cat >>confdefs.h <<\_ACEOF + #define Q2963_1 1 +@@ -8702,52 +19969,52 @@ + fi + + +-fi; ++fi ++ + +-# Check whether --enable-cisco or --disable-cisco was given. ++# Check whether --enable-cisco was given. + if test "${enable_cisco+set}" = set; then +- enableval="$enable_cisco" +- cat >>confdefs.h <<\_ACEOF ++ enableval=$enable_cisco; cat >>confdefs.h <<\_ACEOF + #define CISCO 1 + _ACEOF + + +-fi; ++fi ++ + +-# Check whether --enable-thomflex or --disable-thomflex was given. ++# Check whether --enable-thomflex was given. + if test "${enable_thomflex+set}" = set; then +- enableval="$enable_thomflex" +- cat >>confdefs.h <<\_ACEOF ++ enableval=$enable_thomflex; cat >>confdefs.h <<\_ACEOF + #define THOMFLEX 1 + _ACEOF + + +-fi; ++fi ++ + + cat >>confdefs.h <<\_ACEOF + #define BROKEN_POLL 1 + _ACEOF + + +-# Check whether --enable-mpoa_1_1 or --disable-mpoa_1_1 was given. ++# Check whether --enable-mpoa_1_1 was given. + if test "${enable_mpoa_1_1+set}" = set; then +- enableval="$enable_mpoa_1_1" +- cat >>confdefs.h <<\_ACEOF ++ enableval=$enable_mpoa_1_1; cat >>confdefs.h <<\_ACEOF + #define MPOA_1_1 1 + _ACEOF + + +-fi; ++fi ++ + +-# Check whether --enable-mpr or --disable-mpr was given. ++# Check whether --enable-mpr was given. + if test "${enable_mpr+set}" = set; then +- enableval="$enable_mpr" +- ++ enableval=$enable_mpr; + case "$enable_mpr" in + "" | y | ye | yes | Y | YE | YES ) + +-echo "$as_me:$LINENO: checking for main in -lmpr" >&5 +-echo $ECHO_N "checking for main in -lmpr... $ECHO_C" >&6 ++{ echo "$as_me:$LINENO: checking for main in -lmpr" >&5 ++echo $ECHO_N "checking for main in -lmpr... $ECHO_C" >&6; } + if test "${ac_cv_lib_mpr_main+set}" = set; then + echo $ECHO_N "(cached) $ECHO_C" >&6 + else +@@ -8764,45 +20031,43 @@ + int + main () + { +-main (); ++return main (); + ; + return 0; + } + _ACEOF + rm -f conftest.$ac_objext conftest$ac_exeext +-if { (eval echo "$as_me:$LINENO: \"$ac_link\"") >&5 +- (eval $ac_link) 2>conftest.er1 ++if { (ac_try="$ac_link" ++case "(($ac_try" in ++ *\"* | *\`* | *\\*) ac_try_echo=\$ac_try;; ++ *) ac_try_echo=$ac_try;; ++esac ++eval "echo \"\$as_me:$LINENO: $ac_try_echo\"") >&5 ++ (eval "$ac_link") 2>conftest.er1 + ac_status=$? + grep -v '^ *+' conftest.er1 >conftest.err + rm -f conftest.er1 + cat conftest.err >&5 + echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); } && +- { ac_try='test -z "$ac_c_werror_flag" || test ! -s conftest.err' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; } && +- { ac_try='test -s conftest$ac_exeext' +- { (eval echo "$as_me:$LINENO: \"$ac_try\"") >&5 +- (eval $ac_try) 2>&5 +- ac_status=$? +- echo "$as_me:$LINENO: \$? = $ac_status" >&5 +- (exit $ac_status); }; }; then ++ (exit $ac_status); } && { ++ test -z "$ac_c_werror_flag" || ++ test ! -s conftest.err ++ } && test -s conftest$ac_exeext && ++ $as_test_x conftest$ac_exeext; then + ac_cv_lib_mpr_main=yes + else + echo "$as_me: failed program was:" >&5 + sed 's/^/| /' conftest.$ac_ext >&5 + +-ac_cv_lib_mpr_main=no ++ ac_cv_lib_mpr_main=no + fi +-rm -f conftest.err conftest.$ac_objext \ ++ ++rm -f core conftest.err conftest.$ac_objext conftest_ipa8_conftest.oo \ + conftest$ac_exeext conftest.$ac_ext + LIBS=$ac_check_lib_save_LIBS + fi +-echo "$as_me:$LINENO: result: $ac_cv_lib_mpr_main" >&5 +-echo "${ECHO_T}$ac_cv_lib_mpr_main" >&6 ++{ echo "$as_me:$LINENO: result: $ac_cv_lib_mpr_main" >&5 ++echo "${ECHO_T}$ac_cv_lib_mpr_main" >&6; } + if test $ac_cv_lib_mpr_main = yes; then + cat >>confdefs.h <<_ACEOF + #define HAVE_LIBMPR 1 +@@ -8822,10 +20087,12 @@ + esac + + +-fi; ++fi ++ ++ + ++ac_config_files="$ac_config_files Makefile doc/Makefile m4/Makefile src/Makefile src/include/Makefile src/lib/Makefile src/arpd/Makefile" + +- ac_config_files="$ac_config_files Makefile doc/Makefile m4/Makefile src/Makefile src/include/Makefile src/lib/Makefile src/arpd/Makefile" + cat >confcache <<\_ACEOF + # This file is a shell script that caches the results of configure + # tests run on this system so they can be shared between configure +@@ -8844,39 +20111,58 @@ + + # The following way of writing the cache mishandles newlines in values, + # but we know of no workaround that is simple, portable, and efficient. +-# So, don't put newlines in cache variables' values. ++# So, we kill variables containing newlines. + # Ultrix sh set writes to stderr and can't be redirected directly, + # and sets the high bit in the cache file unless we assign to the vars. +-{ ++( ++ for ac_var in `(set) 2>&1 | sed -n 's/^\([a-zA-Z_][a-zA-Z0-9_]*\)=.*/\1/p'`; do ++ eval ac_val=\$$ac_var ++ case $ac_val in #( ++ *${as_nl}*) ++ case $ac_var in #( ++ *_cv_*) { echo "$as_me:$LINENO: WARNING: Cache variable $ac_var contains a newline." >&5 ++echo "$as_me: WARNING: Cache variable $ac_var contains a newline." >&2;} ;; ++ esac ++ case $ac_var in #( ++ _ | IFS | as_nl) ;; #( ++ *) $as_unset $ac_var ;; ++ esac ;; ++ esac ++ done ++ + (set) 2>&1 | +- case `(ac_space=' '; set | grep ac_space) 2>&1` in +- *ac_space=\ *) ++ case $as_nl`(ac_space=' '; set) 2>&1` in #( ++ *${as_nl}ac_space=\ *) + # `set' does not quote correctly, so add quotes (double-quote + # substitution turns \\\\ into \\, and sed turns \\ into \). + sed -n \ + "s/'/'\\\\''/g; + s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1='\\2'/p" +- ;; ++ ;; #( + *) + # `set' quotes correctly as required by POSIX, so do not add quotes. +- sed -n \ +- "s/^\\([_$as_cr_alnum]*_cv_[_$as_cr_alnum]*\\)=\\(.*\\)/\\1=\\2/p" ++ sed -n "/^[_$as_cr_alnum]*_cv_[_$as_cr_alnum]*=/p" + ;; +- esac; +-} | ++ esac | ++ sort ++) | + sed ' ++ /^ac_cv_env_/b end + t clear +- : clear ++ :clear + s/^\([^=]*\)=\(.*[{}].*\)$/test "${\1+set}" = set || &/ + t end +- /^ac_cv_env/!s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ +- : end' >>confcache +-if diff $cache_file confcache >/dev/null 2>&1; then :; else +- if test -w $cache_file; then +- test "x$cache_file" != "x/dev/null" && echo "updating cache $cache_file" ++ s/^\([^=]*\)=\(.*\)$/\1=${\1=\2}/ ++ :end' >>confcache ++if diff "$cache_file" confcache >/dev/null 2>&1; then :; else ++ if test -w "$cache_file"; then ++ test "x$cache_file" != "x/dev/null" && ++ { echo "$as_me:$LINENO: updating cache $cache_file" >&5 ++echo "$as_me: updating cache $cache_file" >&6;} + cat confcache >$cache_file + else +- echo "not updating unwritable cache $cache_file" ++ { echo "$as_me:$LINENO: not updating unwritable cache $cache_file" >&5 ++echo "$as_me: not updating unwritable cache $cache_file" >&6;} + fi + fi + rm -f confcache +@@ -8885,38 +20171,45 @@ + # Let make expand exec_prefix. + test "x$exec_prefix" = xNONE && exec_prefix='${prefix}' + +-# VPATH may cause trouble with some makes, so we remove $(srcdir), +-# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and +-# trailing colons and then remove the whole line if VPATH becomes empty +-# (actually we leave an empty line to preserve line numbers). +-if test "x$srcdir" = x.; then +- ac_vpsub='/^[ ]*VPATH[ ]*=/{ +-s/:*\$(srcdir):*/:/; +-s/:*\${srcdir}:*/:/; +-s/:*@srcdir@:*/:/; +-s/^\([^=]*=[ ]*\):*/\1/; +-s/:*$//; +-s/^[^=]*=[ ]*$//; +-}' +-fi +- + DEFS=-DHAVE_CONFIG_H + + ac_libobjs= + ac_ltlibobjs= + for ac_i in : $LIBOBJS; do test "x$ac_i" = x: && continue + # 1. Remove the extension, and $U if already installed. +- ac_i=`echo "$ac_i" | +- sed 's/\$U\././;s/\.o$//;s/\.obj$//'` +- # 2. Add them. +- ac_libobjs="$ac_libobjs $ac_i\$U.$ac_objext" +- ac_ltlibobjs="$ac_ltlibobjs $ac_i"'$U.lo' ++ ac_script='s/\$U\././;s/\.o$//;s/\.obj$//' ++ ac_i=`echo "$ac_i" | sed "$ac_script"` ++ # 2. Prepend LIBOBJDIR. When used with automake>=1.10 LIBOBJDIR ++ # will be set to the directory where LIBOBJS objects are built. ++ ac_libobjs="$ac_libobjs \${LIBOBJDIR}$ac_i\$U.$ac_objext" ++ ac_ltlibobjs="$ac_ltlibobjs \${LIBOBJDIR}$ac_i"'$U.lo' + done + LIBOBJS=$ac_libobjs + + LTLIBOBJS=$ac_ltlibobjs + + ++if test -z "${AMDEP_TRUE}" && test -z "${AMDEP_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"AMDEP\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"AMDEP\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${am__fastdepCC_TRUE}" && test -z "${am__fastdepCC_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCC\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"am__fastdepCC\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi ++if test -z "${am__fastdepCXX_TRUE}" && test -z "${am__fastdepCXX_FALSE}"; then ++ { { echo "$as_me:$LINENO: error: conditional \"am__fastdepCXX\" was never defined. ++Usually this means the macro was only invoked conditionally." >&5 ++echo "$as_me: error: conditional \"am__fastdepCXX\" was never defined. ++Usually this means the macro was only invoked conditionally." >&2;} ++ { (exit 1); exit 1; }; } ++fi + + : ${CONFIG_STATUS=./config.status} + ac_clean_files_save=$ac_clean_files +@@ -8941,17 +20234,45 @@ + ## M4sh Initialization. ## + ## --------------------- ## + +-# Be Bourne compatible ++# Be more Bourne compatible ++DUALCASE=1; export DUALCASE # for MKS sh + if test -n "${ZSH_VERSION+set}" && (emulate sh) >/dev/null 2>&1; then + emulate sh + NULLCMD=: + # Zsh 3.x and 4.x performs word splitting on ${1+"$@"}, which + # is contrary to our usage. Disable this feature. + alias -g '${1+"$@"}'='"$@"' +-elif test -n "${BASH_VERSION+set}" && (set -o posix) >/dev/null 2>&1; then +- set -o posix ++ setopt NO_GLOB_SUBST ++else ++ case `(set -o) 2>/dev/null` in ++ *posix*) set -o posix ;; ++esac ++ ++fi ++ ++ ++ ++ ++# PATH needs CR ++# Avoid depending upon Character Ranges. ++as_cr_letters='abcdefghijklmnopqrstuvwxyz' ++as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' ++as_cr_Letters=$as_cr_letters$as_cr_LETTERS ++as_cr_digits='0123456789' ++as_cr_alnum=$as_cr_Letters$as_cr_digits ++ ++# The user is always right. ++if test "${PATH_SEPARATOR+set}" != set; then ++ echo "#! /bin/sh" >conf$$.sh ++ echo "exit 0" >>conf$$.sh ++ chmod +x conf$$.sh ++ if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then ++ PATH_SEPARATOR=';' ++ else ++ PATH_SEPARATOR=: ++ fi ++ rm -f conf$$.sh + fi +-DUALCASE=1; export DUALCASE # for MKS sh + + # Support unset when possible. + if ( (MAIL=60; unset MAIL) || exit) >/dev/null 2>&1; then +@@ -8961,8 +20282,43 @@ + fi + + ++# IFS ++# We need space, tab and new line, in precisely that order. Quoting is ++# there to prevent editors from complaining about space-tab. ++# (If _AS_PATH_WALK were called with IFS unset, it would disable word ++# splitting by setting IFS to empty value.) ++as_nl=' ++' ++IFS=" "" $as_nl" ++ ++# Find who we are. Look in the path if we contain no directory separator. ++case $0 in ++ *[\\/]* ) as_myself=$0 ;; ++ *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR ++for as_dir in $PATH ++do ++ IFS=$as_save_IFS ++ test -z "$as_dir" && as_dir=. ++ test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break ++done ++IFS=$as_save_IFS ++ ++ ;; ++esac ++# We did not find ourselves, most probably we were run as `sh COMMAND' ++# in which case we are not to be found in the path. ++if test "x$as_myself" = x; then ++ as_myself=$0 ++fi ++if test ! -f "$as_myself"; then ++ echo "$as_myself: error: cannot find myself; rerun with an absolute file name" >&2 ++ { (exit 1); exit 1; } ++fi ++ + # Work around bugs in pre-3.0 UWIN ksh. +-$as_unset ENV MAIL MAILPATH ++for as_var in ENV MAIL MAILPATH ++do ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var ++done + PS1='$ ' + PS2='> ' + PS4='+ ' +@@ -8976,18 +20332,19 @@ + if (set +x; test -z "`(eval $as_var=C; export $as_var) 2>&1`"); then + eval $as_var=C; export $as_var + else +- $as_unset $as_var ++ ($as_unset $as_var) >/dev/null 2>&1 && $as_unset $as_var + fi + done + + # Required to use basename. +-if expr a : '\(a\)' >/dev/null 2>&1; then ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + +-if (basename /) >/dev/null 2>&1 && test "X`basename / 2>&1`" = "X/"; then ++if (basename -- /) >/dev/null 2>&1 && test "X`basename -- / 2>&1`" = "X/"; then + as_basename=basename + else + as_basename=false +@@ -8995,159 +20352,120 @@ + + + # Name of the executable. +-as_me=`$as_basename "$0" || ++as_me=`$as_basename -- "$0" || + $as_expr X/"$0" : '.*/\([^/][^/]*\)/*$' \| \ + X"$0" : 'X\(//\)$' \| \ +- X"$0" : 'X\(/\)$' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$0" : 'X\(/\)' \| . 2>/dev/null || + echo X/"$0" | +- sed '/^.*\/\([^/][^/]*\)\/*$/{ s//\1/; q; } +- /^X\/\(\/\/\)$/{ s//\1/; q; } +- /^X\/\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- +- +-# PATH needs CR, and LINENO needs CR and PATH. +-# Avoid depending upon Character Ranges. +-as_cr_letters='abcdefghijklmnopqrstuvwxyz' +-as_cr_LETTERS='ABCDEFGHIJKLMNOPQRSTUVWXYZ' +-as_cr_Letters=$as_cr_letters$as_cr_LETTERS +-as_cr_digits='0123456789' +-as_cr_alnum=$as_cr_Letters$as_cr_digits ++ sed '/^.*\/\([^/][^/]*\)\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\/\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + +-# The user is always right. +-if test "${PATH_SEPARATOR+set}" != set; then +- echo "#! /bin/sh" >conf$$.sh +- echo "exit 0" >>conf$$.sh +- chmod +x conf$$.sh +- if (PATH="/nonexistent;."; conf$$.sh) >/dev/null 2>&1; then +- PATH_SEPARATOR=';' +- else +- PATH_SEPARATOR=: +- fi +- rm -f conf$$.sh +-fi ++# CDPATH. ++$as_unset CDPATH + + +- as_lineno_1=$LINENO +- as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` +- test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" || { +- # Find who we are. Look in the path if we contain no path at all +- # relative or not. +- case $0 in +- *[\\/]* ) as_myself=$0 ;; +- *) as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in $PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- test -r "$as_dir/$0" && as_myself=$as_dir/$0 && break +-done + +- ;; +- esac +- # We did not find ourselves, most probably we were run as `sh COMMAND' +- # in which case we are not to be found in the path. +- if test "x$as_myself" = x; then +- as_myself=$0 +- fi +- if test ! -f "$as_myself"; then +- { { echo "$as_me:$LINENO: error: cannot find myself; rerun with an absolute path" >&5 +-echo "$as_me: error: cannot find myself; rerun with an absolute path" >&2;} +- { (exit 1); exit 1; }; } +- fi +- case $CONFIG_SHELL in +- '') +- as_save_IFS=$IFS; IFS=$PATH_SEPARATOR +-for as_dir in /bin$PATH_SEPARATOR/usr/bin$PATH_SEPARATOR$PATH +-do +- IFS=$as_save_IFS +- test -z "$as_dir" && as_dir=. +- for as_base in sh bash ksh sh5; do +- case $as_dir in +- /*) +- if ("$as_dir/$as_base" -c ' + as_lineno_1=$LINENO + as_lineno_2=$LINENO +- as_lineno_3=`(expr $as_lineno_1 + 1) 2>/dev/null` + test "x$as_lineno_1" != "x$as_lineno_2" && +- test "x$as_lineno_3" = "x$as_lineno_2" ') 2>/dev/null; then +- $as_unset BASH_ENV || test "${BASH_ENV+set}" != set || { BASH_ENV=; export BASH_ENV; } +- $as_unset ENV || test "${ENV+set}" != set || { ENV=; export ENV; } +- CONFIG_SHELL=$as_dir/$as_base +- export CONFIG_SHELL +- exec "$CONFIG_SHELL" "$0" ${1+"$@"} +- fi;; +- esac +- done +-done +-;; +- esac ++ test "x`expr $as_lineno_1 + 1`" = "x$as_lineno_2" || { + + # Create $as_me.lineno as a copy of $as_myself, but with $LINENO + # uniformly replaced by the line number. The first 'sed' inserts a +- # line-number line before each line; the second 'sed' does the real +- # work. The second script uses 'N' to pair each line-number line +- # with the numbered line, and appends trailing '-' during +- # substitution so that $LINENO is not a special case at line end. ++ # line-number line after each line using $LINENO; the second 'sed' ++ # does the real work. The second script uses 'N' to pair each ++ # line-number line with the line containing $LINENO, and appends ++ # trailing '-' during substitution so that $LINENO is not a special ++ # case at line end. + # (Raja R Harinath suggested sed '=', and Paul Eggert wrote the +- # second 'sed' script. Blame Lee E. McMahon for sed's syntax. :-) +- sed '=' <$as_myself | ++ # scripts with optimization help from Paolo Bonzini. Blame Lee ++ # E. McMahon (1931-1989) for sed's syntax. :-) ++ sed -n ' ++ p ++ /[$]LINENO/= ++ ' <$as_myself | + sed ' ++ s/[$]LINENO.*/&-/ ++ t lineno ++ b ++ :lineno + N +- s,$,-, +- : loop +- s,^\(['$as_cr_digits']*\)\(.*\)[$]LINENO\([^'$as_cr_alnum'_]\),\1\2\1\3, ++ :loop ++ s/[$]LINENO\([^'$as_cr_alnum'_].*\n\)\(.*\)/\2\1\2/ + t loop +- s,-$,, +- s,^['$as_cr_digits']*\n,, ++ s/-\n.*// + ' >$as_me.lineno && +- chmod +x $as_me.lineno || +- { { echo "$as_me:$LINENO: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&5 +-echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2;} ++ chmod +x "$as_me.lineno" || ++ { echo "$as_me: error: cannot create $as_me.lineno; rerun with a POSIX shell" >&2 + { (exit 1); exit 1; }; } + + # Don't try to exec as it changes $[0], causing all sort of problems + # (the dirname of $[0] is not the place where we might find the +- # original and so on. Autoconf is especially sensible to this). +- . ./$as_me.lineno ++ # original and so on. Autoconf is especially sensitive to this). ++ . "./$as_me.lineno" + # Exit status is that of the last command. + exit + } + + +-case `echo "testing\c"; echo 1,2,3`,`echo -n testing; echo 1,2,3` in +- *c*,-n*) ECHO_N= ECHO_C=' +-' ECHO_T=' ' ;; +- *c*,* ) ECHO_N=-n ECHO_C= ECHO_T= ;; +- *) ECHO_N= ECHO_C='\c' ECHO_T= ;; ++if (as_dir=`dirname -- /` && test "X$as_dir" = X/) >/dev/null 2>&1; then ++ as_dirname=dirname ++else ++ as_dirname=false ++fi ++ ++ECHO_C= ECHO_N= ECHO_T= ++case `echo -n x` in ++-n*) ++ case `echo 'x\c'` in ++ *c*) ECHO_T=' ';; # ECHO_T is single tab character. ++ *) ECHO_C='\c';; ++ esac;; ++*) ++ ECHO_N='-n';; + esac + +-if expr a : '\(a\)' >/dev/null 2>&1; then ++if expr a : '\(a\)' >/dev/null 2>&1 && ++ test "X`expr 00001 : '.*\(...\)'`" = X001; then + as_expr=expr + else + as_expr=false + fi + + rm -f conf$$ conf$$.exe conf$$.file ++if test -d conf$$.dir; then ++ rm -f conf$$.dir/conf$$.file ++else ++ rm -f conf$$.dir ++ mkdir conf$$.dir ++fi + echo >conf$$.file + if ln -s conf$$.file conf$$ 2>/dev/null; then +- # We could just check for DJGPP; but this test a) works b) is more generic +- # and c) will remain valid once DJGPP supports symlinks (DJGPP 2.04). +- if test -f conf$$.exe; then +- # Don't use ln at all; we don't have any links ++ as_ln_s='ln -s' ++ # ... but there are two gotchas: ++ # 1) On MSYS, both `ln -s file dir' and `ln file dir' fail. ++ # 2) DJGPP < 2.04 has no symlinks; `ln -s' creates a wrapper executable. ++ # In both cases, we have to default to `cp -p'. ++ ln -s conf$$.file conf$$.dir 2>/dev/null && test ! -f conf$$.exe || + as_ln_s='cp -p' +- else +- as_ln_s='ln -s' +- fi + elif ln conf$$.file conf$$ 2>/dev/null; then + as_ln_s=ln + else + as_ln_s='cp -p' + fi +-rm -f conf$$ conf$$.exe conf$$.file ++rm -f conf$$ conf$$.exe conf$$.dir/conf$$.file conf$$.file ++rmdir conf$$.dir 2>/dev/null + + if mkdir -p . 2>/dev/null; then + as_mkdir_p=: +@@ -9155,8 +20473,29 @@ + test -d ./-p && rmdir ./-p + as_mkdir_p=false + fi +- +-as_executable_p="test -f" ++ ++if test -x / >/dev/null 2>&1; then ++ as_test_x='test -x' ++else ++ if ls -dL / >/dev/null 2>&1; then ++ as_ls_L_option=L ++ else ++ as_ls_L_option= ++ fi ++ as_test_x=' ++ eval sh -c '\'' ++ if test -d "$1"; then ++ test -d "$1/."; ++ else ++ case $1 in ++ -*)set "./$1";; ++ esac; ++ case `ls -ld'$as_ls_L_option' "$1" 2>/dev/null` in ++ ???[sx]*):;;*)false;;esac;fi ++ '\'' sh ++ ' ++fi ++as_executable_p=$as_test_x + + # Sed expression to map a string onto a valid CPP name. + as_tr_cpp="eval sed 'y%*$as_cr_letters%P$as_cr_LETTERS%;s%[^_$as_cr_alnum]%_%g'" +@@ -9165,31 +20504,14 @@ + as_tr_sh="eval sed 'y%*+%pp%;s%[^_$as_cr_alnum]%_%g'" + + +-# IFS +-# We need space, tab and new line, in precisely that order. +-as_nl=' +-' +-IFS=" $as_nl" +- +-# CDPATH. +-$as_unset CDPATH +- + exec 6>&1 + +-# Open the log real soon, to keep \$[0] and so on meaningful, and to ++# Save the log message, to keep $[0] and so on meaningful, and to + # report actual input values of CONFIG_FILES etc. instead of their +-# values after options handling. Logging --version etc. is OK. +-exec 5>>config.log +-{ +- echo +- sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX +-## Running $as_me. ## +-_ASBOX +-} >&5 +-cat >&5 <<_CSEOF +- ++# values after options handling. ++ac_log=" + This file was extended by $as_me, which was +-generated by GNU Autoconf 2.59. Invocation command line was ++generated by GNU Autoconf 2.61. Invocation command line was + + CONFIG_FILES = $CONFIG_FILES + CONFIG_HEADERS = $CONFIG_HEADERS +@@ -9197,30 +20519,20 @@ + CONFIG_COMMANDS = $CONFIG_COMMANDS + $ $0 $@ + +-_CSEOF +-echo "on `(hostname || uname -n) 2>/dev/null | sed 1q`" >&5 +-echo >&5 ++on `(hostname || uname -n) 2>/dev/null | sed 1q` ++" ++ + _ACEOF + ++cat >>$CONFIG_STATUS <<_ACEOF + # Files that config.status was made for. +-if test -n "$ac_config_files"; then +- echo "config_files=\"$ac_config_files\"" >>$CONFIG_STATUS +-fi +- +-if test -n "$ac_config_headers"; then +- echo "config_headers=\"$ac_config_headers\"" >>$CONFIG_STATUS +-fi +- +-if test -n "$ac_config_links"; then +- echo "config_links=\"$ac_config_links\"" >>$CONFIG_STATUS +-fi ++config_files="$ac_config_files" ++config_headers="$ac_config_headers" ++config_commands="$ac_config_commands" + +-if test -n "$ac_config_commands"; then +- echo "config_commands=\"$ac_config_commands\"" >>$CONFIG_STATUS +-fi ++_ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF +- + ac_cs_usage="\ + \`$as_me' instantiates files from templates according to the + current configuration. +@@ -9228,7 +20540,7 @@ + Usage: $0 [OPTIONS] [FILE]... + + -h, --help print this help, then exit +- -V, --version print version number, then exit ++ -V, --version print version number and configuration settings, then exit + -q, --quiet do not print progress messages + -d, --debug don't remove temporary files + --recheck update $as_me by reconfiguring in the same conditions +@@ -9247,19 +20559,21 @@ + $config_commands + + Report bugs to ." +-_ACEOF + ++_ACEOF + cat >>$CONFIG_STATUS <<_ACEOF + ac_cs_version="\\ + config.status +-configured by $0, generated by GNU Autoconf 2.59, +- with options \\"`echo "$ac_configure_args" | sed 's/[\\""\`\$]/\\\\&/g'`\\" ++configured by $0, generated by GNU Autoconf 2.61, ++ with options \\"`echo "$ac_configure_args" | sed 's/^ //; s/[\\""\`\$]/\\\\&/g'`\\" + +-Copyright (C) 2003 Free Software Foundation, Inc. ++Copyright (C) 2006 Free Software Foundation, Inc. + This config.status script is free software; the Free Software Foundation + gives unlimited permission to copy, distribute and modify it." +-srcdir=$srcdir +-INSTALL="$INSTALL" ++ ++ac_pwd='$ac_pwd' ++srcdir='$srcdir' ++INSTALL='$INSTALL' + _ACEOF + + cat >>$CONFIG_STATUS <<\_ACEOF +@@ -9270,39 +20584,24 @@ + do + case $1 in + --*=*) +- ac_option=`expr "x$1" : 'x\([^=]*\)='` +- ac_optarg=`expr "x$1" : 'x[^=]*=\(.*\)'` ++ ac_option=`expr "X$1" : 'X\([^=]*\)='` ++ ac_optarg=`expr "X$1" : 'X[^=]*=\(.*\)'` + ac_shift=: + ;; +- -*) ++ *) + ac_option=$1 + ac_optarg=$2 + ac_shift=shift + ;; +- *) # This is not an option, so the user has probably given explicit +- # arguments. +- ac_option=$1 +- ac_need_defaults=false;; + esac + + case $ac_option in + # Handling of the options. +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF + -recheck | --recheck | --rechec | --reche | --rech | --rec | --re | --r) + ac_cs_recheck=: ;; +- --version | --vers* | -V ) +- echo "$ac_cs_version"; exit 0 ;; +- --he | --h) +- # Conflict between --help and --header +- { { echo "$as_me:$LINENO: error: ambiguous option: $1 +-Try \`$0 --help' for more information." >&5 +-echo "$as_me: error: ambiguous option: $1 +-Try \`$0 --help' for more information." >&2;} +- { (exit 1); exit 1; }; };; +- --help | --hel | -h ) +- echo "$ac_cs_usage"; exit 0 ;; +- --debug | --d* | -d ) ++ --version | --versio | --versi | --vers | --ver | --ve | --v | -V ) ++ echo "$ac_cs_version"; exit ;; ++ --debug | --debu | --deb | --de | --d | -d ) + debug=: ;; + --file | --fil | --fi | --f ) + $ac_shift +@@ -9312,18 +20611,24 @@ + $ac_shift + CONFIG_HEADERS="$CONFIG_HEADERS $ac_optarg" + ac_need_defaults=false;; ++ --he | --h) ++ # Conflict between --help and --header ++ { echo "$as_me: error: ambiguous option: $1 ++Try \`$0 --help' for more information." >&2 ++ { (exit 1); exit 1; }; };; ++ --help | --hel | -h ) ++ echo "$ac_cs_usage"; exit ;; + -q | -quiet | --quiet | --quie | --qui | --qu | --q \ + | -silent | --silent | --silen | --sile | --sil | --si | --s) + ac_cs_silent=: ;; + + # This is an error. +- -*) { { echo "$as_me:$LINENO: error: unrecognized option: $1 +-Try \`$0 --help' for more information." >&5 +-echo "$as_me: error: unrecognized option: $1 +-Try \`$0 --help' for more information." >&2;} ++ -*) { echo "$as_me: error: unrecognized option: $1 ++Try \`$0 --help' for more information." >&2 + { (exit 1); exit 1; }; } ;; + +- *) ac_config_targets="$ac_config_targets $1" ;; ++ *) ac_config_targets="$ac_config_targets $1" ++ ac_need_defaults=false ;; + + esac + shift +@@ -9339,43 +20644,55 @@ + _ACEOF + cat >>$CONFIG_STATUS <<_ACEOF + if \$ac_cs_recheck; then +- echo "running $SHELL $0 " $ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 +- exec $SHELL $0 $ac_configure_args \$ac_configure_extra_args --no-create --no-recursion ++ echo "running CONFIG_SHELL=$SHELL $SHELL $0 "$ac_configure_args \$ac_configure_extra_args " --no-create --no-recursion" >&6 ++ CONFIG_SHELL=$SHELL ++ export CONFIG_SHELL ++ exec $SHELL "$0"$ac_configure_args \$ac_configure_extra_args --no-create --no-recursion + fi + + _ACEOF ++cat >>$CONFIG_STATUS <<\_ACEOF ++exec 5>>config.log ++{ ++ echo ++ sed 'h;s/./-/g;s/^.../## /;s/...$/ ##/;p;x;p;x' <<_ASBOX ++## Running $as_me. ## ++_ASBOX ++ echo "$ac_log" ++} >&5 + ++_ACEOF + cat >>$CONFIG_STATUS <<_ACEOF + # +-# INIT-COMMANDS section. ++# INIT-COMMANDS + # +- +- ++AMDEP_TRUE="$AMDEP_TRUE" ac_aux_dir="$ac_aux_dir" + + _ACEOF + +- +- + cat >>$CONFIG_STATUS <<\_ACEOF ++ ++# Handling of arguments. + for ac_config_target in $ac_config_targets + do +- case "$ac_config_target" in +- # Handling of arguments. +- "Makefile" ) CONFIG_FILES="$CONFIG_FILES Makefile" ;; +- "doc/Makefile" ) CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; +- "m4/Makefile" ) CONFIG_FILES="$CONFIG_FILES m4/Makefile" ;; +- "src/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; +- "src/include/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/include/Makefile" ;; +- "src/lib/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/lib/Makefile" ;; +- "src/arpd/Makefile" ) CONFIG_FILES="$CONFIG_FILES src/arpd/Makefile" ;; +- "default-1" ) CONFIG_COMMANDS="$CONFIG_COMMANDS default-1" ;; +- "config.h" ) CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; ++ case $ac_config_target in ++ "config.h") CONFIG_HEADERS="$CONFIG_HEADERS config.h" ;; ++ "depfiles") CONFIG_COMMANDS="$CONFIG_COMMANDS depfiles" ;; ++ "Makefile") CONFIG_FILES="$CONFIG_FILES Makefile" ;; ++ "doc/Makefile") CONFIG_FILES="$CONFIG_FILES doc/Makefile" ;; ++ "m4/Makefile") CONFIG_FILES="$CONFIG_FILES m4/Makefile" ;; ++ "src/Makefile") CONFIG_FILES="$CONFIG_FILES src/Makefile" ;; ++ "src/include/Makefile") CONFIG_FILES="$CONFIG_FILES src/include/Makefile" ;; ++ "src/lib/Makefile") CONFIG_FILES="$CONFIG_FILES src/lib/Makefile" ;; ++ "src/arpd/Makefile") CONFIG_FILES="$CONFIG_FILES src/arpd/Makefile" ;; ++ + *) { { echo "$as_me:$LINENO: error: invalid argument: $ac_config_target" >&5 + echo "$as_me: error: invalid argument: $ac_config_target" >&2;} + { (exit 1); exit 1; }; };; + esac + done + ++ + # If the user did not use the arguments to specify the items to instantiate, + # then the envvar interface is used. Set only those that are not. + # We use the long form for the default assignment because of an extremely +@@ -9387,335 +20704,471 @@ + fi + + # Have a temporary directory for convenience. Make it in the build tree +-# simply because there is no reason to put it here, and in addition, ++# simply because there is no reason against having it here, and in addition, + # creating and moving files from /tmp can sometimes cause problems. +-# Create a temporary directory, and hook for its removal unless debugging. ++# Hook for its removal unless debugging. ++# Note that there is a small window in which the directory will not be cleaned: ++# after its creation but before its name has been assigned to `$tmp'. + $debug || + { +- trap 'exit_status=$?; rm -rf $tmp && exit $exit_status' 0 ++ tmp= ++ trap 'exit_status=$? ++ { test -z "$tmp" || test ! -d "$tmp" || rm -fr "$tmp"; } && exit $exit_status ++' 0 + trap '{ (exit 1); exit 1; }' 1 2 13 15 + } +- + # Create a (secure) tmp directory for tmp files. + + { +- tmp=`(umask 077 && mktemp -d -q "./confstatXXXXXX") 2>/dev/null` && ++ tmp=`(umask 077 && mktemp -d "./confXXXXXX") 2>/dev/null` && + test -n "$tmp" && test -d "$tmp" + } || + { +- tmp=./confstat$$-$RANDOM +- (umask 077 && mkdir $tmp) ++ tmp=./conf$$-$RANDOM ++ (umask 077 && mkdir "$tmp") + } || + { + echo "$me: cannot create a temporary directory in ." >&2 + { (exit 1); exit 1; } + } + +-_ACEOF +- +-cat >>$CONFIG_STATUS <<_ACEOF +- + # +-# CONFIG_FILES section. ++# Set up the sed scripts for CONFIG_FILES section. + # + + # No need to generate the scripts if there are no CONFIG_FILES. + # This happens for instance when ./config.status config.h +-if test -n "\$CONFIG_FILES"; then +- # Protect against being on the right side of a sed subst in config.status. +- sed 's/,@/@@/; s/@,/@@/; s/,;t t\$/@;t t/; /@;t t\$/s/[\\\\&,]/\\\\&/g; +- s/@@/,@/; s/@@/@,/; s/@;t t\$/,;t t/' >\$tmp/subs.sed <<\\CEOF +-s,@SHELL@,$SHELL,;t t +-s,@PATH_SEPARATOR@,$PATH_SEPARATOR,;t t +-s,@PACKAGE_NAME@,$PACKAGE_NAME,;t t +-s,@PACKAGE_TARNAME@,$PACKAGE_TARNAME,;t t +-s,@PACKAGE_VERSION@,$PACKAGE_VERSION,;t t +-s,@PACKAGE_STRING@,$PACKAGE_STRING,;t t +-s,@PACKAGE_BUGREPORT@,$PACKAGE_BUGREPORT,;t t +-s,@exec_prefix@,$exec_prefix,;t t +-s,@prefix@,$prefix,;t t +-s,@program_transform_name@,$program_transform_name,;t t +-s,@bindir@,$bindir,;t t +-s,@sbindir@,$sbindir,;t t +-s,@libexecdir@,$libexecdir,;t t +-s,@datadir@,$datadir,;t t +-s,@sysconfdir@,$sysconfdir,;t t +-s,@sharedstatedir@,$sharedstatedir,;t t +-s,@localstatedir@,$localstatedir,;t t +-s,@libdir@,$libdir,;t t +-s,@includedir@,$includedir,;t t +-s,@oldincludedir@,$oldincludedir,;t t +-s,@infodir@,$infodir,;t t +-s,@mandir@,$mandir,;t t +-s,@build_alias@,$build_alias,;t t +-s,@host_alias@,$host_alias,;t t +-s,@target_alias@,$target_alias,;t t +-s,@DEFS@,$DEFS,;t t +-s,@ECHO_C@,$ECHO_C,;t t +-s,@ECHO_N@,$ECHO_N,;t t +-s,@ECHO_T@,$ECHO_T,;t t +-s,@LIBS@,$LIBS,;t t +-s,@build@,$build,;t t +-s,@build_cpu@,$build_cpu,;t t +-s,@build_vendor@,$build_vendor,;t t +-s,@build_os@,$build_os,;t t +-s,@host@,$host,;t t +-s,@host_cpu@,$host_cpu,;t t +-s,@host_vendor@,$host_vendor,;t t +-s,@host_os@,$host_os,;t t +-s,@target@,$target,;t t +-s,@target_cpu@,$target_cpu,;t t +-s,@target_vendor@,$target_vendor,;t t +-s,@target_os@,$target_os,;t t +-s,@INSTALL_PROGRAM@,$INSTALL_PROGRAM,;t t +-s,@INSTALL_SCRIPT@,$INSTALL_SCRIPT,;t t +-s,@INSTALL_DATA@,$INSTALL_DATA,;t t +-s,@PACKAGE@,$PACKAGE,;t t +-s,@VERSION@,$VERSION,;t t +-s,@ACLOCAL@,$ACLOCAL,;t t +-s,@AUTOCONF@,$AUTOCONF,;t t +-s,@AUTOMAKE@,$AUTOMAKE,;t t +-s,@AUTOHEADER@,$AUTOHEADER,;t t +-s,@MAKEINFO@,$MAKEINFO,;t t +-s,@SET_MAKE@,$SET_MAKE,;t t +-s,@LIBVER_CURRENT@,$LIBVER_CURRENT,;t t +-s,@LIBVER_REVISION@,$LIBVER_REVISION,;t t +-s,@LIBVER_AGE@,$LIBVER_AGE,;t t +-s,@CC@,$CC,;t t +-s,@CFLAGS@,$CFLAGS,;t t +-s,@LDFLAGS@,$LDFLAGS,;t t +-s,@CPPFLAGS@,$CPPFLAGS,;t t +-s,@ac_ct_CC@,$ac_ct_CC,;t t +-s,@EXEEXT@,$EXEEXT,;t t +-s,@OBJEXT@,$OBJEXT,;t t +-s,@LEX@,$LEX,;t t +-s,@LEXLIB@,$LEXLIB,;t t +-s,@LEX_OUTPUT_ROOT@,$LEX_OUTPUT_ROOT,;t t +-s,@YACC@,$YACC,;t t +-s,@LN_S@,$LN_S,;t t +-s,@ECHO@,$ECHO,;t t +-s,@RANLIB@,$RANLIB,;t t +-s,@ac_ct_RANLIB@,$ac_ct_RANLIB,;t t +-s,@STRIP@,$STRIP,;t t +-s,@ac_ct_STRIP@,$ac_ct_STRIP,;t t +-s,@CPP@,$CPP,;t t +-s,@EGREP@,$EGREP,;t t +-s,@LIBTOOL@,$LIBTOOL,;t t +-s,@LIBTOOL_DEPS@,$LIBTOOL_DEPS,;t t +-s,@PERL@,$PERL,;t t +-s,@LIBOBJS@,$LIBOBJS,;t t +-s,@LTLIBOBJS@,$LTLIBOBJS,;t t +-CEOF +- +-_ACEOF +- +- cat >>$CONFIG_STATUS <<\_ACEOF +- # Split the substitutions into bite-sized pieces for seds with +- # small command number limits, like on Digital OSF/1 and HP-UX. +- ac_max_sed_lines=48 +- ac_sed_frag=1 # Number of current file. +- ac_beg=1 # First line for current file. +- ac_end=$ac_max_sed_lines # Line after last line for current file. +- ac_more_lines=: +- ac_sed_cmds= +- while $ac_more_lines; do +- if test $ac_beg -gt 1; then +- sed "1,${ac_beg}d; ${ac_end}q" $tmp/subs.sed >$tmp/subs.frag +- else +- sed "${ac_end}q" $tmp/subs.sed >$tmp/subs.frag +- fi +- if test ! -s $tmp/subs.frag; then +- ac_more_lines=false +- else +- # The purpose of the label and of the branching condition is to +- # speed up the sed processing (if there are no `@' at all, there +- # is no need to browse any of the substitutions). +- # These are the two extra sed commands mentioned above. +- (echo ':t +- /@[a-zA-Z_][a-zA-Z_0-9]*@/!b' && cat $tmp/subs.frag) >$tmp/subs-$ac_sed_frag.sed +- if test -z "$ac_sed_cmds"; then +- ac_sed_cmds="sed -f $tmp/subs-$ac_sed_frag.sed" +- else +- ac_sed_cmds="$ac_sed_cmds | sed -f $tmp/subs-$ac_sed_frag.sed" +- fi +- ac_sed_frag=`expr $ac_sed_frag + 1` +- ac_beg=$ac_end +- ac_end=`expr $ac_end + $ac_max_sed_lines` +- fi +- done +- if test -z "$ac_sed_cmds"; then +- ac_sed_cmds=cat ++if test -n "$CONFIG_FILES"; then ++ ++_ACEOF ++ ++ ++ ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++SHELL!$SHELL$ac_delim ++PATH_SEPARATOR!$PATH_SEPARATOR$ac_delim ++PACKAGE_NAME!$PACKAGE_NAME$ac_delim ++PACKAGE_TARNAME!$PACKAGE_TARNAME$ac_delim ++PACKAGE_VERSION!$PACKAGE_VERSION$ac_delim ++PACKAGE_STRING!$PACKAGE_STRING$ac_delim ++PACKAGE_BUGREPORT!$PACKAGE_BUGREPORT$ac_delim ++exec_prefix!$exec_prefix$ac_delim ++prefix!$prefix$ac_delim ++program_transform_name!$program_transform_name$ac_delim ++bindir!$bindir$ac_delim ++sbindir!$sbindir$ac_delim ++libexecdir!$libexecdir$ac_delim ++datarootdir!$datarootdir$ac_delim ++datadir!$datadir$ac_delim ++sysconfdir!$sysconfdir$ac_delim ++sharedstatedir!$sharedstatedir$ac_delim ++localstatedir!$localstatedir$ac_delim ++includedir!$includedir$ac_delim ++oldincludedir!$oldincludedir$ac_delim ++docdir!$docdir$ac_delim ++infodir!$infodir$ac_delim ++htmldir!$htmldir$ac_delim ++dvidir!$dvidir$ac_delim ++pdfdir!$pdfdir$ac_delim ++psdir!$psdir$ac_delim ++libdir!$libdir$ac_delim ++localedir!$localedir$ac_delim ++mandir!$mandir$ac_delim ++DEFS!$DEFS$ac_delim ++ECHO_C!$ECHO_C$ac_delim ++ECHO_N!$ECHO_N$ac_delim ++ECHO_T!$ECHO_T$ac_delim ++LIBS!$LIBS$ac_delim ++build_alias!$build_alias$ac_delim ++host_alias!$host_alias$ac_delim ++target_alias!$target_alias$ac_delim ++build!$build$ac_delim ++build_cpu!$build_cpu$ac_delim ++build_vendor!$build_vendor$ac_delim ++build_os!$build_os$ac_delim ++host!$host$ac_delim ++host_cpu!$host_cpu$ac_delim ++host_vendor!$host_vendor$ac_delim ++host_os!$host_os$ac_delim ++target!$target$ac_delim ++target_cpu!$target_cpu$ac_delim ++target_vendor!$target_vendor$ac_delim ++target_os!$target_os$ac_delim ++INSTALL_PROGRAM!$INSTALL_PROGRAM$ac_delim ++INSTALL_SCRIPT!$INSTALL_SCRIPT$ac_delim ++INSTALL_DATA!$INSTALL_DATA$ac_delim ++CYGPATH_W!$CYGPATH_W$ac_delim ++PACKAGE!$PACKAGE$ac_delim ++VERSION!$VERSION$ac_delim ++ACLOCAL!$ACLOCAL$ac_delim ++AUTOCONF!$AUTOCONF$ac_delim ++AUTOMAKE!$AUTOMAKE$ac_delim ++AUTOHEADER!$AUTOHEADER$ac_delim ++MAKEINFO!$MAKEINFO$ac_delim ++install_sh!$install_sh$ac_delim ++STRIP!$STRIP$ac_delim ++INSTALL_STRIP_PROGRAM!$INSTALL_STRIP_PROGRAM$ac_delim ++mkdir_p!$mkdir_p$ac_delim ++AWK!$AWK$ac_delim ++SET_MAKE!$SET_MAKE$ac_delim ++am__leading_dot!$am__leading_dot$ac_delim ++AMTAR!$AMTAR$ac_delim ++am__tar!$am__tar$ac_delim ++am__untar!$am__untar$ac_delim ++LIBVER_CURRENT!$LIBVER_CURRENT$ac_delim ++LIBVER_REVISION!$LIBVER_REVISION$ac_delim ++LIBVER_AGE!$LIBVER_AGE$ac_delim ++CC!$CC$ac_delim ++CFLAGS!$CFLAGS$ac_delim ++LDFLAGS!$LDFLAGS$ac_delim ++CPPFLAGS!$CPPFLAGS$ac_delim ++ac_ct_CC!$ac_ct_CC$ac_delim ++EXEEXT!$EXEEXT$ac_delim ++OBJEXT!$OBJEXT$ac_delim ++DEPDIR!$DEPDIR$ac_delim ++am__include!$am__include$ac_delim ++am__quote!$am__quote$ac_delim ++AMDEP_TRUE!$AMDEP_TRUE$ac_delim ++AMDEP_FALSE!$AMDEP_FALSE$ac_delim ++AMDEPBACKSLASH!$AMDEPBACKSLASH$ac_delim ++CCDEPMODE!$CCDEPMODE$ac_delim ++am__fastdepCC_TRUE!$am__fastdepCC_TRUE$ac_delim ++am__fastdepCC_FALSE!$am__fastdepCC_FALSE$ac_delim ++LEX!$LEX$ac_delim ++LEX_OUTPUT_ROOT!$LEX_OUTPUT_ROOT$ac_delim ++LEXLIB!$LEXLIB$ac_delim ++YACC!$YACC$ac_delim ++YFLAGS!$YFLAGS$ac_delim ++GREP!$GREP$ac_delim ++EGREP!$EGREP$ac_delim ++LN_S!$LN_S$ac_delim ++_ACEOF ++ ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 97; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " + fi +-fi # test -n "$CONFIG_FILES" ++done ++ ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` ++fi ++ ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-1.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b ++_ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++CEOF$ac_eof ++_ACEOF ++ ++ ++ac_delim='%!_!# ' ++for ac_last_try in false false false false false :; do ++ cat >conf$$subs.sed <<_ACEOF ++ECHO!$ECHO$ac_delim ++AR!$AR$ac_delim ++RANLIB!$RANLIB$ac_delim ++CPP!$CPP$ac_delim ++CXX!$CXX$ac_delim ++CXXFLAGS!$CXXFLAGS$ac_delim ++ac_ct_CXX!$ac_ct_CXX$ac_delim ++CXXDEPMODE!$CXXDEPMODE$ac_delim ++am__fastdepCXX_TRUE!$am__fastdepCXX_TRUE$ac_delim ++am__fastdepCXX_FALSE!$am__fastdepCXX_FALSE$ac_delim ++CXXCPP!$CXXCPP$ac_delim ++F77!$F77$ac_delim ++FFLAGS!$FFLAGS$ac_delim ++ac_ct_F77!$ac_ct_F77$ac_delim ++LIBTOOL!$LIBTOOL$ac_delim ++LIBTOOL_DEPS!$LIBTOOL_DEPS$ac_delim ++PERL!$PERL$ac_delim ++LIBOBJS!$LIBOBJS$ac_delim ++LTLIBOBJS!$LTLIBOBJS$ac_delim ++_ACEOF ++ ++ if test `sed -n "s/.*$ac_delim\$/X/p" conf$$subs.sed | grep -c X` = 19; then ++ break ++ elif $ac_last_try; then ++ { { echo "$as_me:$LINENO: error: could not make $CONFIG_STATUS" >&5 ++echo "$as_me: error: could not make $CONFIG_STATUS" >&2;} ++ { (exit 1); exit 1; }; } ++ else ++ ac_delim="$ac_delim!$ac_delim _$ac_delim!! " ++ fi ++done ++ ++ac_eof=`sed -n '/^CEOF[0-9]*$/s/CEOF/0/p' conf$$subs.sed` ++if test -n "$ac_eof"; then ++ ac_eof=`echo "$ac_eof" | sort -nru | sed 1q` ++ ac_eof=`expr $ac_eof + 1` ++fi + ++cat >>$CONFIG_STATUS <<_ACEOF ++cat >"\$tmp/subs-2.sed" <<\CEOF$ac_eof ++/@[a-zA-Z_][a-zA-Z_0-9]*@/!b end + _ACEOF ++sed ' ++s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g ++s/^/s,@/; s/!/@,|#_!!_#|/ ++:n ++t n ++s/'"$ac_delim"'$/,g/; t ++s/$/\\/; p ++N; s/^.*\n//; s/[,\\&]/\\&/g; s/@/@|#_!!_#|/g; b n ++' >>$CONFIG_STATUS >$CONFIG_STATUS <<_ACEOF ++:end ++s/|#_!!_#|//g ++CEOF$ac_eof ++_ACEOF ++ ++ ++# VPATH may cause trouble with some makes, so we remove $(srcdir), ++# ${srcdir} and @srcdir@ from VPATH if srcdir is ".", strip leading and ++# trailing colons and then remove the whole line if VPATH becomes empty ++# (actually we leave an empty line to preserve line numbers). ++if test "x$srcdir" = x.; then ++ ac_vpsub='/^[ ]*VPATH[ ]*=/{ ++s/:*\$(srcdir):*/:/ ++s/:*\${srcdir}:*/:/ ++s/:*@srcdir@:*/:/ ++s/^\([^=]*=[ ]*\):*/\1/ ++s/:*$// ++s/^[^=]*=[ ]*$// ++}' ++fi ++ + cat >>$CONFIG_STATUS <<\_ACEOF +-for ac_file in : $CONFIG_FILES; do test "x$ac_file" = x: && continue +- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". +- case $ac_file in +- - | *:- | *:-:* ) # input from stdin +- cat >$tmp/stdin +- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- * ) ac_file_in=$ac_file.in ;; ++fi # test -n "$CONFIG_FILES" ++ ++ ++for ac_tag in :F $CONFIG_FILES :H $CONFIG_HEADERS :C $CONFIG_COMMANDS ++do ++ case $ac_tag in ++ :[FHLC]) ac_mode=$ac_tag; continue;; ++ esac ++ case $ac_mode$ac_tag in ++ :[FHL]*:*);; ++ :L* | :C*:*) { { echo "$as_me:$LINENO: error: Invalid tag $ac_tag." >&5 ++echo "$as_me: error: Invalid tag $ac_tag." >&2;} ++ { (exit 1); exit 1; }; };; ++ :[FH]-) ac_tag=-:-;; ++ :[FH]*) ac_tag=$ac_tag:$ac_tag.in;; ++ esac ++ ac_save_IFS=$IFS ++ IFS=: ++ set x $ac_tag ++ IFS=$ac_save_IFS ++ shift ++ ac_file=$1 ++ shift ++ ++ case $ac_mode in ++ :L) ac_source=$1;; ++ :[FH]) ++ ac_file_inputs= ++ for ac_f ++ do ++ case $ac_f in ++ -) ac_f="$tmp/stdin";; ++ *) # Look for the file first in the build tree, then in the source tree ++ # (if the path is not absolute). The absolute path cannot be DOS-style, ++ # because $ac_f cannot contain `:'. ++ test -f "$ac_f" || ++ case $ac_f in ++ [\\/$]*) false;; ++ *) test -f "$srcdir/$ac_f" && ac_f="$srcdir/$ac_f";; ++ esac || ++ { { echo "$as_me:$LINENO: error: cannot find input file: $ac_f" >&5 ++echo "$as_me: error: cannot find input file: $ac_f" >&2;} ++ { (exit 1); exit 1; }; };; ++ esac ++ ac_file_inputs="$ac_file_inputs $ac_f" ++ done ++ ++ # Let's still pretend it is `configure' which instantiates (i.e., don't ++ # use $as_me), people would be surprised to read: ++ # /* config.h. Generated by config.status. */ ++ configure_input="Generated from "`IFS=: ++ echo $* | sed 's|^[^:]*/||;s|:[^:]*/|, |g'`" by configure." ++ if test x"$ac_file" != x-; then ++ configure_input="$ac_file. $configure_input" ++ { echo "$as_me:$LINENO: creating $ac_file" >&5 ++echo "$as_me: creating $ac_file" >&6;} ++ fi ++ ++ case $ac_tag in ++ *:-:* | *:-) cat >"$tmp/stdin";; ++ esac ++ ;; + esac + +- # Compute @srcdir@, @top_srcdir@, and @INSTALL@ for subdirectories. +- ac_dir=`(dirname "$ac_file") 2>/dev/null || ++ ac_dir=`$as_dirname -- "$ac_file" || + $as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$ac_file" : 'X\(//\)[^/]' \| \ + X"$ac_file" : 'X\(//\)$' \| \ +- X"$ac_file" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$ac_file" : 'X\(/\)' \| . 2>/dev/null || + echo X"$ac_file" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p "$ac_dir" +- else +- as_dir="$ac_dir" ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ { as_dir="$ac_dir" ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || + $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || + echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break + done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 ++echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } +- + ac_builddir=. + +-if test "$ac_dir" != .; then ++case "$ac_dir" in ++.) ac_dir_suffix= ac_top_builddir_sub=. ac_top_build_prefix= ;; ++*) + ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` +- # A "../" for each directory in $ac_dir_suffix. +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +-else +- ac_dir_suffix= ac_top_builddir= +-fi ++ # A ".." for each directory in $ac_dir_suffix. ++ ac_top_builddir_sub=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,/..,g;s,/,,'` ++ case $ac_top_builddir_sub in ++ "") ac_top_builddir_sub=. ac_top_build_prefix= ;; ++ *) ac_top_build_prefix=$ac_top_builddir_sub/ ;; ++ esac ;; ++esac ++ac_abs_top_builddir=$ac_pwd ++ac_abs_builddir=$ac_pwd$ac_dir_suffix ++# for backward compatibility: ++ac_top_builddir=$ac_top_build_prefix + + case $srcdir in +- .) # No --srcdir option. We are building in place. ++ .) # We are building in place. + ac_srcdir=. +- if test -z "$ac_top_builddir"; then +- ac_top_srcdir=. +- else +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` +- fi ;; +- [\\/]* | ?:[\\/]* ) # Absolute path. ++ ac_top_srcdir=$ac_top_builddir_sub ++ ac_abs_top_srcdir=$ac_pwd ;; ++ [\\/]* | ?:[\\/]* ) # Absolute name. + ac_srcdir=$srcdir$ac_dir_suffix; +- ac_top_srcdir=$srcdir ;; +- *) # Relative path. +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix +- ac_top_srcdir=$ac_top_builddir$srcdir ;; ++ ac_top_srcdir=$srcdir ++ ac_abs_top_srcdir=$srcdir ;; ++ *) # Relative name. ++ ac_srcdir=$ac_top_build_prefix$srcdir$ac_dir_suffix ++ ac_top_srcdir=$ac_top_build_prefix$srcdir ++ ac_abs_top_srcdir=$ac_pwd/$srcdir ;; + esac ++ac_abs_srcdir=$ac_abs_top_srcdir$ac_dir_suffix + +-# Do not use `cd foo && pwd` to compute absolute paths, because +-# the directories may not exist. +-case `pwd` in +-.) ac_abs_builddir="$ac_dir";; +-*) +- case "$ac_dir" in +- .) ac_abs_builddir=`pwd`;; +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; +- *) ac_abs_builddir=`pwd`/"$ac_dir";; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_builddir=${ac_top_builddir}.;; +-*) +- case ${ac_top_builddir}. in +- .) ac_abs_top_builddir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_srcdir=$ac_srcdir;; +-*) +- case $ac_srcdir in +- .) ac_abs_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_srcdir=$ac_top_srcdir;; +-*) +- case $ac_top_srcdir in +- .) ac_abs_top_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; +- esac;; +-esac + ++ case $ac_mode in ++ :F) ++ # ++ # CONFIG_FILE ++ # + + case $INSTALL in + [\\/$]* | ?:[\\/]* ) ac_INSTALL=$INSTALL ;; +- *) ac_INSTALL=$ac_top_builddir$INSTALL ;; ++ *) ac_INSTALL=$ac_top_build_prefix$INSTALL ;; + esac ++_ACEOF + +- # Let's still pretend it is `configure' which instantiates (i.e., don't +- # use $as_me), people would be surprised to read: +- # /* config.h. Generated by config.status. */ +- if test x"$ac_file" = x-; then +- configure_input= +- else +- configure_input="$ac_file. " +- fi +- configure_input=$configure_input"Generated from `echo $ac_file_in | +- sed 's,.*/,,'` by configure." +- +- # First look for the input files in the build tree, otherwise in the +- # src tree. +- ac_file_inputs=`IFS=: +- for f in $ac_file_in; do +- case $f in +- -) echo $tmp/stdin ;; +- [\\/$]*) +- # Absolute (can't be DOS-style, as IFS=:) +- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- echo "$f";; +- *) # Relative +- if test -f "$f"; then +- # Build tree +- echo "$f" +- elif test -f "$srcdir/$f"; then +- # Source tree +- echo "$srcdir/$f" +- else +- # /dev/null tree +- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- fi;; +- esac +- done` || { (exit 1); exit 1; } +- +- if test x"$ac_file" != x-; then +- { echo "$as_me:$LINENO: creating $ac_file" >&5 +-echo "$as_me: creating $ac_file" >&6;} +- rm -f "$ac_file" +- fi ++cat >>$CONFIG_STATUS <<\_ACEOF ++# If the template does not know about datarootdir, expand it. ++# FIXME: This hack should be removed a few years after 2.60. ++ac_datarootdir_hack=; ac_datarootdir_seen= ++ ++case `sed -n '/datarootdir/ { ++ p ++ q ++} ++/@datadir@/p ++/@docdir@/p ++/@infodir@/p ++/@localedir@/p ++/@mandir@/p ++' $ac_file_inputs` in ++*datarootdir*) ac_datarootdir_seen=yes;; ++*@datadir@*|*@docdir@*|*@infodir@*|*@localedir@*|*@mandir@*) ++ { echo "$as_me:$LINENO: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&5 ++echo "$as_me: WARNING: $ac_file_inputs seems to ignore the --datarootdir setting" >&2;} ++_ACEOF ++cat >>$CONFIG_STATUS <<_ACEOF ++ ac_datarootdir_hack=' ++ s&@datadir@&$datadir&g ++ s&@docdir@&$docdir&g ++ s&@infodir@&$infodir&g ++ s&@localedir@&$localedir&g ++ s&@mandir@&$mandir&g ++ s&\\\${datarootdir}&$datarootdir&g' ;; ++esac + _ACEOF ++ ++# Neutralize VPATH when `$srcdir' = `.'. ++# Shell code in configure.ac might set extrasub. ++# FIXME: do we really want to maintain this feature? + cat >>$CONFIG_STATUS <<_ACEOF + sed "$ac_vpsub + $extrasub +@@ -9723,370 +21176,299 @@ + cat >>$CONFIG_STATUS <<\_ACEOF + :t + /@[a-zA-Z_][a-zA-Z_0-9]*@/!b +-s,@configure_input@,$configure_input,;t t +-s,@srcdir@,$ac_srcdir,;t t +-s,@abs_srcdir@,$ac_abs_srcdir,;t t +-s,@top_srcdir@,$ac_top_srcdir,;t t +-s,@abs_top_srcdir@,$ac_abs_top_srcdir,;t t +-s,@builddir@,$ac_builddir,;t t +-s,@abs_builddir@,$ac_abs_builddir,;t t +-s,@top_builddir@,$ac_top_builddir,;t t +-s,@abs_top_builddir@,$ac_abs_top_builddir,;t t +-s,@INSTALL@,$ac_INSTALL,;t t +-" $ac_file_inputs | (eval "$ac_sed_cmds") >$tmp/out +- rm -f $tmp/stdin +- if test x"$ac_file" != x-; then +- mv $tmp/out $ac_file +- else +- cat $tmp/out +- rm -f $tmp/out +- fi +- +-done +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF +- +-# +-# CONFIG_HEADER section. +-# +- +-# These sed commands are passed to sed as "A NAME B NAME C VALUE D", where +-# NAME is the cpp macro being defined and VALUE is the value it is being given. +-# +-# ac_d sets the value in "#define NAME VALUE" lines. +-ac_dA='s,^\([ ]*\)#\([ ]*define[ ][ ]*\)' +-ac_dB='[ ].*$,\1#\2' +-ac_dC=' ' +-ac_dD=',;t' +-# ac_u turns "#undef NAME" without trailing blanks into "#define NAME VALUE". +-ac_uA='s,^\([ ]*\)#\([ ]*\)undef\([ ][ ]*\)' +-ac_uB='$,\1#\2define\3' +-ac_uC=' ' +-ac_uD=',;t' ++s&@configure_input@&$configure_input&;t t ++s&@top_builddir@&$ac_top_builddir_sub&;t t ++s&@srcdir@&$ac_srcdir&;t t ++s&@abs_srcdir@&$ac_abs_srcdir&;t t ++s&@top_srcdir@&$ac_top_srcdir&;t t ++s&@abs_top_srcdir@&$ac_abs_top_srcdir&;t t ++s&@builddir@&$ac_builddir&;t t ++s&@abs_builddir@&$ac_abs_builddir&;t t ++s&@abs_top_builddir@&$ac_abs_top_builddir&;t t ++s&@INSTALL@&$ac_INSTALL&;t t ++$ac_datarootdir_hack ++" $ac_file_inputs | sed -f "$tmp/subs-1.sed" | sed -f "$tmp/subs-2.sed" >$tmp/out ++ ++test -z "$ac_datarootdir_hack$ac_datarootdir_seen" && ++ { ac_out=`sed -n '/\${datarootdir}/p' "$tmp/out"`; test -n "$ac_out"; } && ++ { ac_out=`sed -n '/^[ ]*datarootdir[ ]*:*=/p' "$tmp/out"`; test -z "$ac_out"; } && ++ { echo "$as_me:$LINENO: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined." >&5 ++echo "$as_me: WARNING: $ac_file contains a reference to the variable \`datarootdir' ++which seems to be undefined. Please make sure it is defined." >&2;} + +-for ac_file in : $CONFIG_HEADERS; do test "x$ac_file" = x: && continue +- # Support "outfile[:infile[:infile...]]", defaulting infile="outfile.in". ++ rm -f "$tmp/stdin" + case $ac_file in +- - | *:- | *:-:* ) # input from stdin +- cat >$tmp/stdin +- ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- *:* ) ac_file_in=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_file=`echo "$ac_file" | sed 's,:.*,,'` ;; +- * ) ac_file_in=$ac_file.in ;; ++ -) cat "$tmp/out"; rm -f "$tmp/out";; ++ *) rm -f "$ac_file"; mv "$tmp/out" $ac_file;; + esac +- +- test x"$ac_file" != x- && { echo "$as_me:$LINENO: creating $ac_file" >&5 +-echo "$as_me: creating $ac_file" >&6;} +- +- # First look for the input files in the build tree, otherwise in the +- # src tree. +- ac_file_inputs=`IFS=: +- for f in $ac_file_in; do +- case $f in +- -) echo $tmp/stdin ;; +- [\\/$]*) +- # Absolute (can't be DOS-style, as IFS=:) +- test -f "$f" || { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- # Do quote $f, to prevent DOS paths from being IFS'd. +- echo "$f";; +- *) # Relative +- if test -f "$f"; then +- # Build tree +- echo "$f" +- elif test -f "$srcdir/$f"; then +- # Source tree +- echo "$srcdir/$f" +- else +- # /dev/null tree +- { { echo "$as_me:$LINENO: error: cannot find input file: $f" >&5 +-echo "$as_me: error: cannot find input file: $f" >&2;} +- { (exit 1); exit 1; }; } +- fi;; +- esac +- done` || { (exit 1); exit 1; } +- # Remove the trailing spaces. +- sed 's/[ ]*$//' $ac_file_inputs >$tmp/in +- ++ ;; ++ :H) ++ # ++ # CONFIG_HEADER ++ # + _ACEOF + +-# Transform confdefs.h into two sed scripts, `conftest.defines' and +-# `conftest.undefs', that substitutes the proper values into +-# config.h.in to produce config.h. The first handles `#define' +-# templates, and the second `#undef' templates. +-# And first: Protect against being on the right side of a sed subst in +-# config.status. Protect against being in an unquoted here document +-# in config.status. +-rm -f conftest.defines conftest.undefs +-# Using a here document instead of a string reduces the quoting nightmare. +-# Putting comments in sed scripts is not portable. +-# +-# `end' is used to avoid that the second main sed command (meant for +-# 0-ary CPP macros) applies to n-ary macro definitions. +-# See the Autoconf documentation for `clear'. +-cat >confdef2sed.sed <<\_ACEOF +-s/[\\&,]/\\&/g +-s,[\\$`],\\&,g +-t clear +-: clear +-s,^[ ]*#[ ]*define[ ][ ]*\([^ (][^ (]*\)\(([^)]*)\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1\2${ac_dC}\3${ac_dD},gp +-t end +-s,^[ ]*#[ ]*define[ ][ ]*\([^ ][^ ]*\)[ ]*\(.*\)$,${ac_dA}\1${ac_dB}\1${ac_dC}\2${ac_dD},gp +-: end +-_ACEOF +-# If some macros were called several times there might be several times +-# the same #defines, which is useless. Nevertheless, we may not want to +-# sort them, since we want the *last* AC-DEFINE to be honored. +-uniq confdefs.h | sed -n -f confdef2sed.sed >conftest.defines +-sed 's/ac_d/ac_u/g' conftest.defines >conftest.undefs +-rm -f confdef2sed.sed ++# Transform confdefs.h into a sed script `conftest.defines', that ++# substitutes the proper values into config.h.in to produce config.h. ++rm -f conftest.defines conftest.tail ++# First, append a space to every undef/define line, to ease matching. ++echo 's/$/ /' >conftest.defines ++# Then, protect against being on the right side of a sed subst, or in ++# an unquoted here document, in config.status. If some macros were ++# called several times there might be several #defines for the same ++# symbol, which is useless. But do not sort them, since the last ++# AC_DEFINE must be honored. ++ac_word_re=[_$as_cr_Letters][_$as_cr_alnum]* ++# These sed commands are passed to sed as "A NAME B PARAMS C VALUE D", where ++# NAME is the cpp macro being defined, VALUE is the value it is being given. ++# PARAMS is the parameter list in the macro definition--in most cases, it's ++# just an empty string. ++ac_dA='s,^\\([ #]*\\)[^ ]*\\([ ]*' ++ac_dB='\\)[ (].*,\\1define\\2' ++ac_dC=' ' ++ac_dD=' ,' ++ ++uniq confdefs.h | ++ sed -n ' ++ t rset ++ :rset ++ s/^[ ]*#[ ]*define[ ][ ]*// ++ t ok ++ d ++ :ok ++ s/[\\&,]/\\&/g ++ s/^\('"$ac_word_re"'\)\(([^()]*)\)[ ]*\(.*\)/ '"$ac_dA"'\1'"$ac_dB"'\2'"${ac_dC}"'\3'"$ac_dD"'/p ++ s/^\('"$ac_word_re"'\)[ ]*\(.*\)/'"$ac_dA"'\1'"$ac_dB$ac_dC"'\2'"$ac_dD"'/p ++ ' >>conftest.defines + +-# This sed command replaces #undef with comments. This is necessary, for ++# Remove the space that was appended to ease matching. ++# Then replace #undef with comments. This is necessary, for + # example, in the case of _POSIX_SOURCE, which is predefined and required + # on some systems where configure will not decide to define it. +-cat >>conftest.undefs <<\_ACEOF +-s,^[ ]*#[ ]*undef[ ][ ]*[a-zA-Z_][a-zA-Z_0-9]*,/* & */, +-_ACEOF ++# (The regexp can be short, since the line contains either #define or #undef.) ++echo 's/ $// ++s,^[ #]*u.*,/* & */,' >>conftest.defines ++ ++# Break up conftest.defines: ++ac_max_sed_lines=50 ++ ++# First sed command is: sed -f defines.sed $ac_file_inputs >"$tmp/out1" ++# Second one is: sed -f defines.sed "$tmp/out1" >"$tmp/out2" ++# Third one will be: sed -f defines.sed "$tmp/out2" >"$tmp/out1" ++# et cetera. ++ac_in='$ac_file_inputs' ++ac_out='"$tmp/out1"' ++ac_nxt='"$tmp/out2"' + +-# Break up conftest.defines because some shells have a limit on the size +-# of here documents, and old seds have small limits too (100 cmds). +-echo ' # Handle all the #define templates only if necessary.' >>$CONFIG_STATUS +-echo ' if grep "^[ ]*#[ ]*define" $tmp/in >/dev/null; then' >>$CONFIG_STATUS +-echo ' # If there are no defines, we may have an empty if/fi' >>$CONFIG_STATUS +-echo ' :' >>$CONFIG_STATUS +-rm -f conftest.tail +-while grep . conftest.defines >/dev/null +-do +- # Write a limited-size here document to $tmp/defines.sed. +- echo ' cat >$tmp/defines.sed <>$CONFIG_STATUS +- # Speed up: don't consider the non `#define' lines. +- echo '/^[ ]*#[ ]*define/!b' >>$CONFIG_STATUS +- # Work around the forget-to-reset-the-flag bug. +- echo 't clr' >>$CONFIG_STATUS +- echo ': clr' >>$CONFIG_STATUS +- sed ${ac_max_here_lines}q conftest.defines >>$CONFIG_STATUS ++while : ++do ++ # Write a here document: ++ cat >>$CONFIG_STATUS <<_ACEOF ++ # First, check the format of the line: ++ cat >"\$tmp/defines.sed" <<\\CEOF ++/^[ ]*#[ ]*undef[ ][ ]*$ac_word_re[ ]*\$/b def ++/^[ ]*#[ ]*define[ ][ ]*$ac_word_re[( ]/b def ++b ++:def ++_ACEOF ++ sed ${ac_max_sed_lines}q conftest.defines >>$CONFIG_STATUS + echo 'CEOF +- sed -f $tmp/defines.sed $tmp/in >$tmp/out +- rm -f $tmp/in +- mv $tmp/out $tmp/in +-' >>$CONFIG_STATUS +- sed 1,${ac_max_here_lines}d conftest.defines >conftest.tail ++ sed -f "$tmp/defines.sed"' "$ac_in >$ac_out" >>$CONFIG_STATUS ++ ac_in=$ac_out; ac_out=$ac_nxt; ac_nxt=$ac_in ++ sed 1,${ac_max_sed_lines}d conftest.defines >conftest.tail ++ grep . conftest.tail >/dev/null || break + rm -f conftest.defines + mv conftest.tail conftest.defines + done +-rm -f conftest.defines +-echo ' fi # grep' >>$CONFIG_STATUS +-echo >>$CONFIG_STATUS +- +-# Break up conftest.undefs because some shells have a limit on the size +-# of here documents, and old seds have small limits too (100 cmds). +-echo ' # Handle all the #undef templates' >>$CONFIG_STATUS +-rm -f conftest.tail +-while grep . conftest.undefs >/dev/null +-do +- # Write a limited-size here document to $tmp/undefs.sed. +- echo ' cat >$tmp/undefs.sed <>$CONFIG_STATUS +- # Speed up: don't consider the non `#undef' +- echo '/^[ ]*#[ ]*undef/!b' >>$CONFIG_STATUS +- # Work around the forget-to-reset-the-flag bug. +- echo 't clr' >>$CONFIG_STATUS +- echo ': clr' >>$CONFIG_STATUS +- sed ${ac_max_here_lines}q conftest.undefs >>$CONFIG_STATUS +- echo 'CEOF +- sed -f $tmp/undefs.sed $tmp/in >$tmp/out +- rm -f $tmp/in +- mv $tmp/out $tmp/in +-' >>$CONFIG_STATUS +- sed 1,${ac_max_here_lines}d conftest.undefs >conftest.tail +- rm -f conftest.undefs +- mv conftest.tail conftest.undefs +-done +-rm -f conftest.undefs ++rm -f conftest.defines conftest.tail + ++echo "ac_result=$ac_in" >>$CONFIG_STATUS + cat >>$CONFIG_STATUS <<\_ACEOF +- # Let's still pretend it is `configure' which instantiates (i.e., don't +- # use $as_me), people would be surprised to read: +- # /* config.h. Generated by config.status. */ +- if test x"$ac_file" = x-; then +- echo "/* Generated by configure. */" >$tmp/config.h +- else +- echo "/* $ac_file. Generated by configure. */" >$tmp/config.h +- fi +- cat $tmp/in >>$tmp/config.h +- rm -f $tmp/in + if test x"$ac_file" != x-; then +- if diff $ac_file $tmp/config.h >/dev/null 2>&1; then ++ echo "/* $configure_input */" >"$tmp/config.h" ++ cat "$ac_result" >>"$tmp/config.h" ++ if diff $ac_file "$tmp/config.h" >/dev/null 2>&1; then + { echo "$as_me:$LINENO: $ac_file is unchanged" >&5 + echo "$as_me: $ac_file is unchanged" >&6;} + else +- ac_dir=`(dirname "$ac_file") 2>/dev/null || +-$as_expr X"$ac_file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$ac_file" : 'X\(//\)[^/]' \| \ +- X"$ac_file" : 'X\(//\)$' \| \ +- X"$ac_file" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$ac_file" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p "$ac_dir" +- else +- as_dir="$ac_dir" +- as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || +-$as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$as_dir" : 'X\(//\)[^/]' \| \ +- X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} +- { (exit 1); exit 1; }; }; } +- + rm -f $ac_file +- mv $tmp/config.h $ac_file ++ mv "$tmp/config.h" $ac_file + fi + else +- cat $tmp/config.h +- rm -f $tmp/config.h ++ echo "/* $configure_input */" ++ cat "$ac_result" + fi ++ rm -f "$tmp/out12" ++# Compute $ac_file's index in $config_headers. ++_am_stamp_count=1 ++for _am_header in $config_headers :; do ++ case $_am_header in ++ $ac_file | $ac_file:* ) ++ break ;; ++ * ) ++ _am_stamp_count=`expr $_am_stamp_count + 1` ;; ++ esac + done +-_ACEOF +-cat >>$CONFIG_STATUS <<\_ACEOF ++echo "timestamp for $ac_file" >`$as_dirname -- $ac_file || ++$as_expr X$ac_file : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X$ac_file : 'X\(//\)[^/]' \| \ ++ X$ac_file : 'X\(//\)$' \| \ ++ X$ac_file : 'X\(/\)' \| . 2>/dev/null || ++echo X$ac_file | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'`/stamp-h$_am_stamp_count ++ ;; ++ ++ :C) { echo "$as_me:$LINENO: executing $ac_file commands" >&5 ++echo "$as_me: executing $ac_file commands" >&6;} ++ ;; ++ esac + +-# +-# CONFIG_COMMANDS section. +-# +-for ac_file in : $CONFIG_COMMANDS; do test "x$ac_file" = x: && continue +- ac_dest=`echo "$ac_file" | sed 's,:.*,,'` +- ac_source=`echo "$ac_file" | sed 's,[^:]*:,,'` +- ac_dir=`(dirname "$ac_dest") 2>/dev/null || +-$as_expr X"$ac_dest" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ +- X"$ac_dest" : 'X\(//\)[^/]' \| \ +- X"$ac_dest" : 'X\(//\)$' \| \ +- X"$ac_dest" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || +-echo X"$ac_dest" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` +- { if $as_mkdir_p; then +- mkdir -p "$ac_dir" ++ ++ case $ac_file$ac_mode in ++ "depfiles":C) test x"$AMDEP_TRUE" != x"" || for mf in $CONFIG_FILES; do ++ # Strip MF so we end up with the name of the file. ++ mf=`echo "$mf" | sed -e 's/:.*$//'` ++ # Check whether this is an Automake generated Makefile or not. ++ # We used to match only the files named `Makefile.in', but ++ # some people rename them; so instead we look at the file content. ++ # Grep'ing the first line is not enough: some people post-process ++ # each Makefile.in and add a new line on top of each file to say so. ++ # So let's grep whole file. ++ if grep '^#.*generated by automake' $mf > /dev/null 2>&1; then ++ dirpart=`$as_dirname -- "$mf" || ++$as_expr X"$mf" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$mf" : 'X\(//\)[^/]' \| \ ++ X"$mf" : 'X\(//\)$' \| \ ++ X"$mf" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$mf" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` + else +- as_dir="$ac_dir" ++ continue ++ fi ++ # Extract the definition of DEPDIR, am__include, and am__quote ++ # from the Makefile without running `make'. ++ DEPDIR=`sed -n 's/^DEPDIR = //p' < "$mf"` ++ test -z "$DEPDIR" && continue ++ am__include=`sed -n 's/^am__include = //p' < "$mf"` ++ test -z "am__include" && continue ++ am__quote=`sed -n 's/^am__quote = //p' < "$mf"` ++ # When using ansi2knr, U may be empty or an underscore; expand it ++ U=`sed -n 's/^U = //p' < "$mf"` ++ # Find all dependency output files, they are included files with ++ # $(DEPDIR) in their names. We invoke sed twice because it is the ++ # simplest approach to changing $(DEPDIR) to its actual value in the ++ # expansion. ++ for file in `sed -n " ++ s/^$am__include $am__quote\(.*(DEPDIR).*\)$am__quote"'$/\1/p' <"$mf" | \ ++ sed -e 's/\$(DEPDIR)/'"$DEPDIR"'/g' -e 's/\$U/'"$U"'/g'`; do ++ # Make sure the directory exists. ++ test -f "$dirpart/$file" && continue ++ fdir=`$as_dirname -- "$file" || ++$as_expr X"$file" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ ++ X"$file" : 'X\(//\)[^/]' \| \ ++ X"$file" : 'X\(//\)$' \| \ ++ X"$file" : 'X\(/\)' \| . 2>/dev/null || ++echo X"$file" | ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ { as_dir=$dirpart/$fdir ++ case $as_dir in #( ++ -*) as_dir=./$as_dir;; ++ esac ++ test -d "$as_dir" || { $as_mkdir_p && mkdir -p "$as_dir"; } || { + as_dirs= +- while test ! -d "$as_dir"; do +- as_dirs="$as_dir $as_dirs" +- as_dir=`(dirname "$as_dir") 2>/dev/null || ++ while :; do ++ case $as_dir in #( ++ *\'*) as_qdir=`echo "$as_dir" | sed "s/'/'\\\\\\\\''/g"`;; #( ++ *) as_qdir=$as_dir;; ++ esac ++ as_dirs="'$as_qdir' $as_dirs" ++ as_dir=`$as_dirname -- "$as_dir" || + $as_expr X"$as_dir" : 'X\(.*[^/]\)//*[^/][^/]*/*$' \| \ + X"$as_dir" : 'X\(//\)[^/]' \| \ + X"$as_dir" : 'X\(//\)$' \| \ +- X"$as_dir" : 'X\(/\)' \| \ +- . : '\(.\)' 2>/dev/null || ++ X"$as_dir" : 'X\(/\)' \| . 2>/dev/null || + echo X"$as_dir" | +- sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ s//\1/; q; } +- /^X\(\/\/\)[^/].*/{ s//\1/; q; } +- /^X\(\/\/\)$/{ s//\1/; q; } +- /^X\(\/\).*/{ s//\1/; q; } +- s/.*/./; q'` ++ sed '/^X\(.*[^/]\)\/\/*[^/][^/]*\/*$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)[^/].*/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\/\)$/{ ++ s//\1/ ++ q ++ } ++ /^X\(\/\).*/{ ++ s//\1/ ++ q ++ } ++ s/.*/./; q'` ++ test -d "$as_dir" && break + done +- test ! -n "$as_dirs" || mkdir $as_dirs +- fi || { { echo "$as_me:$LINENO: error: cannot create directory \"$ac_dir\"" >&5 +-echo "$as_me: error: cannot create directory \"$ac_dir\"" >&2;} ++ test -z "$as_dirs" || eval "mkdir $as_dirs" ++ } || test -d "$as_dir" || { { echo "$as_me:$LINENO: error: cannot create directory $as_dir" >&5 ++echo "$as_me: error: cannot create directory $as_dir" >&2;} + { (exit 1); exit 1; }; }; } ++ # echo "creating $dirpart/$file" ++ echo '# dummy' > "$dirpart/$file" ++ done ++done ++ ;; + +- ac_builddir=. +- +-if test "$ac_dir" != .; then +- ac_dir_suffix=/`echo "$ac_dir" | sed 's,^\.[\\/],,'` +- # A "../" for each directory in $ac_dir_suffix. +- ac_top_builddir=`echo "$ac_dir_suffix" | sed 's,/[^\\/]*,../,g'` +-else +- ac_dir_suffix= ac_top_builddir= +-fi +- +-case $srcdir in +- .) # No --srcdir option. We are building in place. +- ac_srcdir=. +- if test -z "$ac_top_builddir"; then +- ac_top_srcdir=. +- else +- ac_top_srcdir=`echo $ac_top_builddir | sed 's,/$,,'` +- fi ;; +- [\\/]* | ?:[\\/]* ) # Absolute path. +- ac_srcdir=$srcdir$ac_dir_suffix; +- ac_top_srcdir=$srcdir ;; +- *) # Relative path. +- ac_srcdir=$ac_top_builddir$srcdir$ac_dir_suffix +- ac_top_srcdir=$ac_top_builddir$srcdir ;; +-esac +- +-# Do not use `cd foo && pwd` to compute absolute paths, because +-# the directories may not exist. +-case `pwd` in +-.) ac_abs_builddir="$ac_dir";; +-*) +- case "$ac_dir" in +- .) ac_abs_builddir=`pwd`;; +- [\\/]* | ?:[\\/]* ) ac_abs_builddir="$ac_dir";; +- *) ac_abs_builddir=`pwd`/"$ac_dir";; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_builddir=${ac_top_builddir}.;; +-*) +- case ${ac_top_builddir}. in +- .) ac_abs_top_builddir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_builddir=${ac_top_builddir}.;; +- *) ac_abs_top_builddir=$ac_abs_builddir/${ac_top_builddir}.;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_srcdir=$ac_srcdir;; +-*) +- case $ac_srcdir in +- .) ac_abs_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_srcdir=$ac_srcdir;; +- *) ac_abs_srcdir=$ac_abs_builddir/$ac_srcdir;; +- esac;; +-esac +-case $ac_abs_builddir in +-.) ac_abs_top_srcdir=$ac_top_srcdir;; +-*) +- case $ac_top_srcdir in +- .) ac_abs_top_srcdir=$ac_abs_builddir;; +- [\\/]* | ?:[\\/]* ) ac_abs_top_srcdir=$ac_top_srcdir;; +- *) ac_abs_top_srcdir=$ac_abs_builddir/$ac_top_srcdir;; +- esac;; +-esac +- +- +- { echo "$as_me:$LINENO: executing $ac_dest commands" >&5 +-echo "$as_me: executing $ac_dest commands" >&6;} +- case $ac_dest in +- default-1 ) test -z "$CONFIG_HEADERS" || echo timestamp > stamp-h ;; + esac +-done +-_ACEOF ++done # for ac_tag + +-cat >>$CONFIG_STATUS <<\_ACEOF + + { (exit 0); exit 0; } + _ACEOF +Index: linux-atm-2.4.1/depcomp +=================================================================== +--- /dev/null 1970-01-01 00:00:00.000000000 +0000 ++++ linux-atm-2.4.1/depcomp 2007-10-20 21:45:44.287356221 +0200 +@@ -0,0 +1,530 @@ ++#! /bin/sh ++# depcomp - compile a program generating dependencies as side-effects ++ ++scriptversion=2005-07-09.11 ++ ++# Copyright (C) 1999, 2000, 2003, 2004, 2005 Free Software Foundation, Inc. ++ ++# This program is free software; you can redistribute it and/or modify ++# it under the terms of the GNU General Public License as published by ++# the Free Software Foundation; either version 2, or (at your option) ++# any later version. ++ ++# This program is distributed in the hope that it will be useful, ++# but WITHOUT ANY WARRANTY; without even the implied warranty of ++# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the ++# GNU General Public License for more details. ++ ++# You should have received a copy of the GNU General Public License ++# along with this program; if not, write to the Free Software ++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA ++# 02110-1301, USA. ++ ++# As a special exception to the GNU General Public License, if you ++# distribute this file as part of a program that contains a ++# configuration script generated by Autoconf, you may include it under ++# the same distribution terms that you use for the rest of that program. ++ ++# Originally written by Alexandre Oliva . ++ ++case $1 in ++ '') ++ echo "$0: No command. Try \`$0 --help' for more information." 1>&2 ++ exit 1; ++ ;; ++ -h | --h*) ++ cat <<\EOF ++Usage: depcomp [--help] [--version] PROGRAM [ARGS] ++ ++Run PROGRAMS ARGS to compile a file, generating dependencies ++as side-effects. ++ ++Environment variables: ++ depmode Dependency tracking mode. ++ source Source file read by `PROGRAMS ARGS'. ++ object Object file output by `PROGRAMS ARGS'. ++ DEPDIR directory where to store dependencies. ++ depfile Dependency file to output. ++ tmpdepfile Temporary file to use when outputing dependencies. ++ libtool Whether libtool is used (yes/no). ++ ++Report bugs to . ++EOF ++ exit $? ++ ;; ++ -v | --v*) ++ echo "depcomp $scriptversion" ++ exit $? ++ ;; ++esac ++ ++if test -z "$depmode" || test -z "$source" || test -z "$object"; then ++ echo "depcomp: Variables source, object and depmode must be set" 1>&2 ++ exit 1 ++fi ++ ++# Dependencies for sub/bar.o or sub/bar.obj go into sub/.deps/bar.Po. ++depfile=${depfile-`echo "$object" | ++ sed 's|[^\\/]*$|'${DEPDIR-.deps}'/&|;s|\.\([^.]*\)$|.P\1|;s|Pobj$|Po|'`} ++tmpdepfile=${tmpdepfile-`echo "$depfile" | sed 's/\.\([^.]*\)$/.T\1/'`} ++ ++rm -f "$tmpdepfile" ++ ++# Some modes work just like other modes, but use different flags. We ++# parameterize here, but still list the modes in the big case below, ++# to make depend.m4 easier to write. Note that we *cannot* use a case ++# here, because this file can only contain one case statement. ++if test "$depmode" = hp; then ++ # HP compiler uses -M and no extra arg. ++ gccflag=-M ++ depmode=gcc ++fi ++ ++if test "$depmode" = dashXmstdout; then ++ # This is just like dashmstdout with a different argument. ++ dashmflag=-xM ++ depmode=dashmstdout ++fi ++ ++case "$depmode" in ++gcc3) ++## gcc 3 implements dependency tracking that does exactly what ++## we want. Yay! Note: for some reason libtool 1.4 doesn't like ++## it if -MD -MP comes after the -MF stuff. Hmm. ++ "$@" -MT "$object" -MD -MP -MF "$tmpdepfile" ++ stat=$? ++ if test $stat -eq 0; then : ++ else ++ rm -f "$tmpdepfile" ++ exit $stat ++ fi ++ mv "$tmpdepfile" "$depfile" ++ ;; ++ ++gcc) ++## There are various ways to get dependency output from gcc. Here's ++## why we pick this rather obscure method: ++## - Don't want to use -MD because we'd like the dependencies to end ++## up in a subdir. Having to rename by hand is ugly. ++## (We might end up doing this anyway to support other compilers.) ++## - The DEPENDENCIES_OUTPUT environment variable makes gcc act like ++## -MM, not -M (despite what the docs say). ++## - Using -M directly means running the compiler twice (even worse ++## than renaming). ++ if test -z "$gccflag"; then ++ gccflag=-MD, ++ fi ++ "$@" -Wp,"$gccflag$tmpdepfile" ++ stat=$? ++ if test $stat -eq 0; then : ++ else ++ rm -f "$tmpdepfile" ++ exit $stat ++ fi ++ rm -f "$depfile" ++ echo "$object : \\" > "$depfile" ++ alpha=ABCDEFGHIJKLMNOPQRSTUVWXYZabcdefghijklmnopqrstuvwxyz ++## The second -e expression handles DOS-style file names with drive letters. ++ sed -e 's/^[^:]*: / /' \ ++ -e 's/^['$alpha']:\/[^:]*: / /' < "$tmpdepfile" >> "$depfile" ++## This next piece of magic avoids the `deleted header file' problem. ++## The problem is that when a header file which appears in a .P file ++## is deleted, the dependency causes make to die (because there is ++## typically no way to rebuild the header). We avoid this by adding ++## dummy dependencies for each header file. Too bad gcc doesn't do ++## this for us directly. ++ tr ' ' ' ++' < "$tmpdepfile" | ++## Some versions of gcc put a space before the `:'. On the theory ++## that the space means something, we add a space to the output as ++## well. ++## Some versions of the HPUX 10.20 sed can't process this invocation ++## correctly. Breaking it into two sed invocations is a workaround. ++ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" ++ rm -f "$tmpdepfile" ++ ;; ++ ++hp) ++ # This case exists only to let depend.m4 do its work. It works by ++ # looking at the text of this script. This case will never be run, ++ # since it is checked for above. ++ exit 1 ++ ;; ++ ++sgi) ++ if test "$libtool" = yes; then ++ "$@" "-Wp,-MDupdate,$tmpdepfile" ++ else ++ "$@" -MDupdate "$tmpdepfile" ++ fi ++ stat=$? ++ if test $stat -eq 0; then : ++ else ++ rm -f "$tmpdepfile" ++ exit $stat ++ fi ++ rm -f "$depfile" ++ ++ if test -f "$tmpdepfile"; then # yes, the sourcefile depend on other files ++ echo "$object : \\" > "$depfile" ++ ++ # Clip off the initial element (the dependent). Don't try to be ++ # clever and replace this with sed code, as IRIX sed won't handle ++ # lines with more than a fixed number of characters (4096 in ++ # IRIX 6.2 sed, 8192 in IRIX 6.5). We also remove comment lines; ++ # the IRIX cc adds comments like `#:fec' to the end of the ++ # dependency line. ++ tr ' ' ' ++' < "$tmpdepfile" \ ++ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' | \ ++ tr ' ++' ' ' >> $depfile ++ echo >> $depfile ++ ++ # The second pass generates a dummy entry for each header file. ++ tr ' ' ' ++' < "$tmpdepfile" \ ++ | sed -e 's/^.*\.o://' -e 's/#.*$//' -e '/^$/ d' -e 's/$/:/' \ ++ >> $depfile ++ else ++ # The sourcefile does not contain any dependencies, so just ++ # store a dummy comment line, to avoid errors with the Makefile ++ # "include basename.Plo" scheme. ++ echo "#dummy" > "$depfile" ++ fi ++ rm -f "$tmpdepfile" ++ ;; ++ ++aix) ++ # The C for AIX Compiler uses -M and outputs the dependencies ++ # in a .u file. In older versions, this file always lives in the ++ # current directory. Also, the AIX compiler puts `$object:' at the ++ # start of each line; $object doesn't have directory information. ++ # Version 6 uses the directory in both cases. ++ stripped=`echo "$object" | sed 's/\(.*\)\..*$/\1/'` ++ tmpdepfile="$stripped.u" ++ if test "$libtool" = yes; then ++ "$@" -Wc,-M ++ else ++ "$@" -M ++ fi ++ stat=$? ++ ++ if test -f "$tmpdepfile"; then : ++ else ++ stripped=`echo "$stripped" | sed 's,^.*/,,'` ++ tmpdepfile="$stripped.u" ++ fi ++ ++ if test $stat -eq 0; then : ++ else ++ rm -f "$tmpdepfile" ++ exit $stat ++ fi ++ ++ if test -f "$tmpdepfile"; then ++ outname="$stripped.o" ++ # Each line is of the form `foo.o: dependent.h'. ++ # Do two passes, one to just change these to ++ # `$object: dependent.h' and one to simply `dependent.h:'. ++ sed -e "s,^$outname:,$object :," < "$tmpdepfile" > "$depfile" ++ sed -e "s,^$outname: \(.*\)$,\1:," < "$tmpdepfile" >> "$depfile" ++ else ++ # The sourcefile does not contain any dependencies, so just ++ # store a dummy comment line, to avoid errors with the Makefile ++ # "include basename.Plo" scheme. ++ echo "#dummy" > "$depfile" ++ fi ++ rm -f "$tmpdepfile" ++ ;; ++ ++icc) ++ # Intel's C compiler understands `-MD -MF file'. However on ++ # icc -MD -MF foo.d -c -o sub/foo.o sub/foo.c ++ # ICC 7.0 will fill foo.d with something like ++ # foo.o: sub/foo.c ++ # foo.o: sub/foo.h ++ # which is wrong. We want: ++ # sub/foo.o: sub/foo.c ++ # sub/foo.o: sub/foo.h ++ # sub/foo.c: ++ # sub/foo.h: ++ # ICC 7.1 will output ++ # foo.o: sub/foo.c sub/foo.h ++ # and will wrap long lines using \ : ++ # foo.o: sub/foo.c ... \ ++ # sub/foo.h ... \ ++ # ... ++ ++ "$@" -MD -MF "$tmpdepfile" ++ stat=$? ++ if test $stat -eq 0; then : ++ else ++ rm -f "$tmpdepfile" ++ exit $stat ++ fi ++ rm -f "$depfile" ++ # Each line is of the form `foo.o: dependent.h', ++ # or `foo.o: dep1.h dep2.h \', or ` dep3.h dep4.h \'. ++ # Do two passes, one to just change these to ++ # `$object: dependent.h' and one to simply `dependent.h:'. ++ sed "s,^[^:]*:,$object :," < "$tmpdepfile" > "$depfile" ++ # Some versions of the HPUX 10.20 sed can't process this invocation ++ # correctly. Breaking it into two sed invocations is a workaround. ++ sed 's,^[^:]*: \(.*\)$,\1,;s/^\\$//;/^$/d;/:$/d' < "$tmpdepfile" | ++ sed -e 's/$/ :/' >> "$depfile" ++ rm -f "$tmpdepfile" ++ ;; ++ ++tru64) ++ # The Tru64 compiler uses -MD to generate dependencies as a side ++ # effect. `cc -MD -o foo.o ...' puts the dependencies into `foo.o.d'. ++ # At least on Alpha/Redhat 6.1, Compaq CCC V6.2-504 seems to put ++ # dependencies in `foo.d' instead, so we check for that too. ++ # Subdirectories are respected. ++ dir=`echo "$object" | sed -e 's|/[^/]*$|/|'` ++ test "x$dir" = "x$object" && dir= ++ base=`echo "$object" | sed -e 's|^.*/||' -e 's/\.o$//' -e 's/\.lo$//'` ++ ++ if test "$libtool" = yes; then ++ # With Tru64 cc, shared objects can also be used to make a ++ # static library. This mecanism is used in libtool 1.4 series to ++ # handle both shared and static libraries in a single compilation. ++ # With libtool 1.4, dependencies were output in $dir.libs/$base.lo.d. ++ # ++ # With libtool 1.5 this exception was removed, and libtool now ++ # generates 2 separate objects for the 2 libraries. These two ++ # compilations output dependencies in in $dir.libs/$base.o.d and ++ # in $dir$base.o.d. We have to check for both files, because ++ # one of the two compilations can be disabled. We should prefer ++ # $dir$base.o.d over $dir.libs/$base.o.d because the latter is ++ # automatically cleaned when .libs/ is deleted, while ignoring ++ # the former would cause a distcleancheck panic. ++ tmpdepfile1=$dir.libs/$base.lo.d # libtool 1.4 ++ tmpdepfile2=$dir$base.o.d # libtool 1.5 ++ tmpdepfile3=$dir.libs/$base.o.d # libtool 1.5 ++ tmpdepfile4=$dir.libs/$base.d # Compaq CCC V6.2-504 ++ "$@" -Wc,-MD ++ else ++ tmpdepfile1=$dir$base.o.d ++ tmpdepfile2=$dir$base.d ++ tmpdepfile3=$dir$base.d ++ tmpdepfile4=$dir$base.d ++ "$@" -MD ++ fi ++ ++ stat=$? ++ if test $stat -eq 0; then : ++ else ++ rm -f "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" ++ exit $stat ++ fi ++ ++ for tmpdepfile in "$tmpdepfile1" "$tmpdepfile2" "$tmpdepfile3" "$tmpdepfile4" ++ do ++ test -f "$tmpdepfile" && break ++ done ++ if test -f "$tmpdepfile"; then ++ sed -e "s,^.*\.[a-z]*:,$object:," < "$tmpdepfile" > "$depfile" ++ # That's a tab and a space in the []. ++ sed -e 's,^.*\.[a-z]*:[ ]*,,' -e 's,$,:,' < "$tmpdepfile" >> "$depfile" ++ else ++ echo "#dummy" > "$depfile" ++ fi ++ rm -f "$tmpdepfile" ++ ;; ++ ++#nosideeffect) ++ # This comment above is used by automake to tell side-effect ++ # dependency tracking mechanisms from slower ones. ++ ++dashmstdout) ++ # Important note: in order to support this mode, a compiler *must* ++ # always write the preprocessed file to stdout, regardless of -o. ++ "$@" || exit $? ++ ++ # Remove the call to Libtool. ++ if test "$libtool" = yes; then ++ while test $1 != '--mode=compile'; do ++ shift ++ done ++ shift ++ fi ++ ++ # Remove `-o $object'. ++ IFS=" " ++ for arg ++ do ++ case $arg in ++ -o) ++ shift ++ ;; ++ $object) ++ shift ++ ;; ++ *) ++ set fnord "$@" "$arg" ++ shift # fnord ++ shift # $arg ++ ;; ++ esac ++ done ++ ++ test -z "$dashmflag" && dashmflag=-M ++ # Require at least two characters before searching for `:' ++ # in the target name. This is to cope with DOS-style filenames: ++ # a dependency such as `c:/foo/bar' could be seen as target `c' otherwise. ++ "$@" $dashmflag | ++ sed 's:^[ ]*[^: ][^:][^:]*\:[ ]*:'"$object"'\: :' > "$tmpdepfile" ++ rm -f "$depfile" ++ cat < "$tmpdepfile" > "$depfile" ++ tr ' ' ' ++' < "$tmpdepfile" | \ ++## Some versions of the HPUX 10.20 sed can't process this invocation ++## correctly. Breaking it into two sed invocations is a workaround. ++ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" ++ rm -f "$tmpdepfile" ++ ;; ++ ++dashXmstdout) ++ # This case only exists to satisfy depend.m4. It is never actually ++ # run, as this mode is specially recognized in the preamble. ++ exit 1 ++ ;; ++ ++makedepend) ++ "$@" || exit $? ++ # Remove any Libtool call ++ if test "$libtool" = yes; then ++ while test $1 != '--mode=compile'; do ++ shift ++ done ++ shift ++ fi ++ # X makedepend ++ shift ++ cleared=no ++ for arg in "$@"; do ++ case $cleared in ++ no) ++ set ""; shift ++ cleared=yes ;; ++ esac ++ case "$arg" in ++ -D*|-I*) ++ set fnord "$@" "$arg"; shift ;; ++ # Strip any option that makedepend may not understand. Remove ++ # the object too, otherwise makedepend will parse it as a source file. ++ -*|$object) ++ ;; ++ *) ++ set fnord "$@" "$arg"; shift ;; ++ esac ++ done ++ obj_suffix="`echo $object | sed 's/^.*\././'`" ++ touch "$tmpdepfile" ++ ${MAKEDEPEND-makedepend} -o"$obj_suffix" -f"$tmpdepfile" "$@" ++ rm -f "$depfile" ++ cat < "$tmpdepfile" > "$depfile" ++ sed '1,2d' "$tmpdepfile" | tr ' ' ' ++' | \ ++## Some versions of the HPUX 10.20 sed can't process this invocation ++## correctly. Breaking it into two sed invocations is a workaround. ++ sed -e 's/^\\$//' -e '/^$/d' -e '/:$/d' | sed -e 's/$/ :/' >> "$depfile" ++ rm -f "$tmpdepfile" "$tmpdepfile".bak ++ ;; ++ ++cpp) ++ # Important note: in order to support this mode, a compiler *must* ++ # always write the preprocessed file to stdout. ++ "$@" || exit $? ++ ++ # Remove the call to Libtool. ++ if test "$libtool" = yes; then ++ while test $1 != '--mode=compile'; do ++ shift ++ done ++ shift ++ fi ++ ++ # Remove `-o $object'. ++ IFS=" " ++ for arg ++ do ++ case $arg in ++ -o) ++ shift ++ ;; ++ $object) ++ shift ++ ;; ++ *) ++ set fnord "$@" "$arg" ++ shift # fnord ++ shift # $arg ++ ;; ++ esac ++ done ++ ++ "$@" -E | ++ sed -n -e '/^# [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' \ ++ -e '/^#line [0-9][0-9]* "\([^"]*\)".*/ s:: \1 \\:p' | ++ sed '$ s: \\$::' > "$tmpdepfile" ++ rm -f "$depfile" ++ echo "$object : \\" > "$depfile" ++ cat < "$tmpdepfile" >> "$depfile" ++ sed < "$tmpdepfile" '/^$/d;s/^ //;s/ \\$//;s/$/ :/' >> "$depfile" ++ rm -f "$tmpdepfile" ++ ;; ++ ++msvisualcpp) ++ # Important note: in order to support this mode, a compiler *must* ++ # always write the preprocessed file to stdout, regardless of -o, ++ # because we must use -o when running libtool. ++ "$@" || exit $? ++ IFS=" " ++ for arg ++ do ++ case "$arg" in ++ "-Gm"|"/Gm"|"-Gi"|"/Gi"|"-ZI"|"/ZI") ++ set fnord "$@" ++ shift ++ shift ++ ;; ++ *) ++ set fnord "$@" "$arg" ++ shift ++ shift ++ ;; ++ esac ++ done ++ "$@" -E | ++ sed -n '/^#line [0-9][0-9]* "\([^"]*\)"/ s::echo "`cygpath -u \\"\1\\"`":p' | sort | uniq > "$tmpdepfile" ++ rm -f "$depfile" ++ echo "$object : \\" > "$depfile" ++ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s:: \1 \\:p' >> "$depfile" ++ echo " " >> "$depfile" ++ . "$tmpdepfile" | sed 's% %\\ %g' | sed -n '/^\(.*\)$/ s::\1\::p' >> "$depfile" ++ rm -f "$tmpdepfile" ++ ;; ++ ++none) ++ exec "$@" ++ ;; ++ ++*) ++ echo "Unknown depmode $depmode" 1>&2 ++ exit 1 ++ ;; ++esac ++ ++exit 0 ++ ++# Local Variables: ++# mode: shell-script ++# sh-indentation: 2 ++# eval: (add-hook 'write-file-hooks 'time-stamp) ++# time-stamp-start: "scriptversion=" ++# time-stamp-format: "%:y-%02m-%02d.%02H" ++# time-stamp-end: "$" ++# End: +Index: linux-atm-2.4.1/doc/Makefile.in +=================================================================== +--- linux-atm-2.4.1.orig/doc/Makefile.in 2007-10-20 21:45:35.722868157 +0200 ++++ linux-atm-2.4.1/doc/Makefile.in 2007-10-20 21:45:44.291356451 +0200 +@@ -1,6 +1,8 @@ +-# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am ++# Makefile.in generated by automake 1.9.6 from Makefile.am. ++# @configure_input@ + +-# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. ++# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -10,198 +12,310 @@ + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + +- +-SHELL = @SHELL@ +- ++@SET_MAKE@ + srcdir = @srcdir@ + top_srcdir = @top_srcdir@ + VPATH = @srcdir@ +-prefix = @prefix@ +-exec_prefix = @exec_prefix@ +- +-bindir = @bindir@ +-sbindir = @sbindir@ +-libexecdir = @libexecdir@ +-datadir = @datadir@ +-sysconfdir = @sysconfdir@ +-sharedstatedir = @sharedstatedir@ +-localstatedir = @localstatedir@ +-libdir = @libdir@ +-infodir = @infodir@ +-mandir = @mandir@ +-includedir = @includedir@ +-oldincludedir = /usr/include +- +-DESTDIR = +- + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ +- + top_builddir = .. +- +-ACLOCAL = @ACLOCAL@ +-AUTOCONF = @AUTOCONF@ +-AUTOMAKE = @AUTOMAKE@ +-AUTOHEADER = @AUTOHEADER@ +- ++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + INSTALL = @INSTALL@ +-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +-INSTALL_DATA = @INSTALL_DATA@ +-INSTALL_SCRIPT = @INSTALL_SCRIPT@ +-transform = @program_transform_name@ +- ++install_sh_DATA = $(install_sh) -c -m 644 ++install_sh_PROGRAM = $(install_sh) -c ++install_sh_SCRIPT = $(install_sh) -c ++INSTALL_HEADER = $(INSTALL_DATA) ++transform = $(program_transform_name) + NORMAL_INSTALL = : + PRE_INSTALL = : + POST_INSTALL = : + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : +-build_alias = @build_alias@ + build_triplet = @build@ +-host_alias = @host_alias@ + host_triplet = @host@ +-target_alias = @target_alias@ + target_triplet = @target@ ++subdir = doc ++DIST_COMMON = README $(srcdir)/Makefile.am $(srcdir)/Makefile.in ++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 ++am__aclocal_m4_deps = $(top_srcdir)/configure.in ++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ ++ $(ACLOCAL_M4) ++mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs ++CONFIG_HEADER = $(top_builddir)/config.h ++CONFIG_CLEAN_FILES = ++SOURCES = ++DIST_SOURCES = ++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++ACLOCAL = @ACLOCAL@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ ++AMTAR = @AMTAR@ + AR = @AR@ +-AS = @AS@ ++AUTOCONF = @AUTOCONF@ ++AUTOHEADER = @AUTOHEADER@ ++AUTOMAKE = @AUTOMAKE@ ++AWK = @AWK@ + CC = @CC@ ++CCDEPMODE = @CCDEPMODE@ ++CFLAGS = @CFLAGS@ ++CPP = @CPP@ ++CPPFLAGS = @CPPFLAGS@ + CXX = @CXX@ + CXXCPP = @CXXCPP@ +-DLLTOOL = @DLLTOOL@ ++CXXDEPMODE = @CXXDEPMODE@ ++CXXFLAGS = @CXXFLAGS@ ++CYGPATH_W = @CYGPATH_W@ ++DEFS = @DEFS@ ++DEPDIR = @DEPDIR@ + ECHO = @ECHO@ ++ECHO_C = @ECHO_C@ ++ECHO_N = @ECHO_N@ ++ECHO_T = @ECHO_T@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ + F77 = @F77@ +-GCJ = @GCJ@ +-GCJFLAGS = @GCJFLAGS@ +-HAVE_LIB = @HAVE_LIB@ ++FFLAGS = @FFLAGS@ ++GREP = @GREP@ ++INSTALL_DATA = @INSTALL_DATA@ ++INSTALL_PROGRAM = @INSTALL_PROGRAM@ ++INSTALL_SCRIPT = @INSTALL_SCRIPT@ ++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ ++LDFLAGS = @LDFLAGS@ + LEX = @LEX@ +-LIB = @LIB@ ++LEXLIB = @LEXLIB@ ++LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ ++LIBOBJS = @LIBOBJS@ ++LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBTOOL_DEPS = @LIBTOOL_DEPS@ + LIBVER_AGE = @LIBVER_AGE@ + LIBVER_CURRENT = @LIBVER_CURRENT@ + LIBVER_REVISION = @LIBVER_REVISION@ + LN_S = @LN_S@ +-LTLIB = @LTLIB@ ++LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-OBJDUMP = @OBJDUMP@ + OBJEXT = @OBJEXT@ + PACKAGE = @PACKAGE@ ++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ ++PACKAGE_NAME = @PACKAGE_NAME@ ++PACKAGE_STRING = @PACKAGE_STRING@ ++PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_VERSION = @PACKAGE_VERSION@ ++PATH_SEPARATOR = @PATH_SEPARATOR@ + PERL = @PERL@ + RANLIB = @RANLIB@ +-RC = @RC@ ++SET_MAKE = @SET_MAKE@ ++SHELL = @SHELL@ + STRIP = @STRIP@ + VERSION = @VERSION@ + YACC = @YACC@ +- ++YFLAGS = @YFLAGS@ ++ac_ct_CC = @ac_ct_CC@ ++ac_ct_CXX = @ac_ct_CXX@ ++ac_ct_F77 = @ac_ct_F77@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ ++am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ ++am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ ++am__include = @am__include@ ++am__leading_dot = @am__leading_dot@ ++am__quote = @am__quote@ ++am__tar = @am__tar@ ++am__untar = @am__untar@ ++bindir = @bindir@ ++build = @build@ ++build_alias = @build_alias@ ++build_cpu = @build_cpu@ ++build_os = @build_os@ ++build_vendor = @build_vendor@ ++datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ ++exec_prefix = @exec_prefix@ ++host = @host@ ++host_alias = @host_alias@ ++host_cpu = @host_cpu@ ++host_os = @host_os@ ++host_vendor = @host_vendor@ ++htmldir = @htmldir@ ++includedir = @includedir@ ++infodir = @infodir@ ++install_sh = @install_sh@ ++libdir = @libdir@ ++libexecdir = @libexecdir@ ++localedir = @localedir@ ++localstatedir = @localstatedir@ ++mandir = @mandir@ ++mkdir_p = @mkdir_p@ ++oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ ++prefix = @prefix@ ++program_transform_name = @program_transform_name@ ++psdir = @psdir@ ++sbindir = @sbindir@ ++sharedstatedir = @sharedstatedir@ ++sysconfdir = @sysconfdir@ ++target = @target@ ++target_alias = @target_alias@ ++target_cpu = @target_cpu@ ++target_os = @target_os@ ++target_vendor = @target_vendor@ + EXTRA_DIST = README.CLP README.tc atm-linux-howto.sgml atm-linux-howto.txt +- + HOWTO = atm-linux-howto.sgml +-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +-CONFIG_HEADER = ../config.h +-CONFIG_CLEAN_FILES = +-DIST_COMMON = README Makefile.am Makefile.in +- ++all: all-am + +-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) +- +-TAR = tar +-GZIP_ENV = --best +-all: all-redirect + .SUFFIXES: +-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) +- cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile ++$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) ++ @for dep in $?; do \ ++ case '$(am__configure_deps)' in \ ++ *$$dep*) \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ ++ && exit 0; \ ++ exit 1;; \ ++ esac; \ ++ done; \ ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu doc/Makefile'; \ ++ cd $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu doc/Makefile ++.PRECIOUS: Makefile ++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ++ @case '$?' in \ ++ *config.status*) \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ ++ *) \ ++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ ++ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ ++ esac; ++ ++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++ ++$(top_srcdir)/configure: $(am__configure_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(ACLOCAL_M4): $(am__aclocal_m4_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++ ++mostlyclean-libtool: ++ -rm -f *.lo + +-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) +- cd $(top_builddir) \ +- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status ++clean-libtool: ++ -rm -rf .libs _libs + ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + tags: TAGS + TAGS: + ++ctags: CTAGS ++CTAGS: + +-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) +- +-subdir = doc + + distdir: $(DISTFILES) +- here=`cd $(top_builddir) && pwd`; \ +- top_distdir=`cd $(top_distdir) && pwd`; \ +- distdir=`cd $(distdir) && pwd`; \ +- cd $(top_srcdir) \ +- && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu doc/Makefile +- @for file in $(DISTFILES); do \ +- d=$(srcdir); \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ ++ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- cp -pr $$d/$$file $(distdir)/$$file; \ ++ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ ++ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ fi; \ ++ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ +- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ +- || cp -p $$d/$$file $(distdir)/$$file || :; \ ++ || cp -p $$d/$$file $(distdir)/$$file \ ++ || exit 1; \ + fi; \ + done +-info-am: +-info: info-am +-dvi-am: +-dvi: dvi-am + check-am: all-am + check: check-am +-installcheck-am: +-installcheck: installcheck-am +-install-exec-am: ++all-am: Makefile ++installdirs: ++install: install-am + install-exec: install-exec-am +- +-install-data-am: + install-data: install-data-am ++uninstall: uninstall-am + + install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +-install: install-am +-uninstall-am: +-uninstall: uninstall-am +-all-am: Makefile +-all-redirect: all-am +-install-strip: +- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +-installdirs: +- + ++installcheck: installcheck-am ++install-strip: ++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ ++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ ++ `test -z '$(STRIP)' || \ ++ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + mostlyclean-generic: + + clean-generic: + + distclean-generic: +- -rm -f Makefile $(CONFIG_CLEAN_FILES) +- -rm -f config.cache config.log stamp-h stamp-h[0-9]* ++ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + + maintainer-clean-generic: +-mostlyclean-am: mostlyclean-generic ++ @echo "This command is intended for maintainers to use" ++ @echo "it deletes files that may require special tools to rebuild." ++clean-am: clean-generic clean-libtool mostlyclean-am + +-mostlyclean: mostlyclean-am ++distclean: distclean-am ++ -rm -f Makefile ++distclean-am: clean-am distclean-generic distclean-libtool + +-clean-am: clean-generic mostlyclean-am ++dvi: dvi-am + +-clean: clean-am ++dvi-am: + +-distclean-am: distclean-generic clean-am +- -rm -f libtool ++info: info-am + +-distclean: distclean-am ++info-am: + +-maintainer-clean-am: maintainer-clean-generic distclean-am +- @echo "This command is intended for maintainers to use;" +- @echo "it deletes files that may require special tools to rebuild." ++install-data-am: ++ ++install-exec-am: ++ ++install-info: install-info-am ++ ++install-man: ++ ++installcheck-am: + + maintainer-clean: maintainer-clean-am ++ -rm -f Makefile ++maintainer-clean-am: distclean-am maintainer-clean-generic + +-.PHONY: tags distdir info-am info dvi-am dvi check check-am \ +-installcheck-am installcheck install-exec-am install-exec \ +-install-data-am install-data install-am install uninstall-am uninstall \ +-all-redirect all-am all installdirs mostlyclean-generic \ +-distclean-generic clean-generic maintainer-clean-generic clean \ +-mostlyclean distclean maintainer-clean ++mostlyclean: mostlyclean-am ++ ++mostlyclean-am: mostlyclean-generic mostlyclean-libtool ++ ++pdf-am: ++ ++ps-am: ++ ++uninstall-am: uninstall-info-am ++ ++.PHONY: all all-am check check-am clean clean-generic clean-libtool \ ++ distclean distclean-generic distclean-libtool distdir dvi \ ++ dvi-am html html-am info info-am install install-am \ ++ install-data install-data-am install-exec install-exec-am \ ++ install-info install-info-am install-man install-strip \ ++ installcheck installcheck-am installdirs maintainer-clean \ ++ maintainer-clean-generic mostlyclean mostlyclean-generic \ ++ mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \ ++ uninstall-info-am + + + atm-linux-howto/atm-linux-howto.html: ${HOWTO} +@@ -231,7 +345,6 @@ + + clean: + -rm -rf atm-linux-howto/ *.ps *.pdf *.rtf *.out +- + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +Index: linux-atm-2.4.1/ltmain.sh +=================================================================== +--- linux-atm-2.4.1.orig/ltmain.sh 2007-10-20 21:45:35.514856307 +0200 ++++ linux-atm-2.4.1/ltmain.sh 2007-10-20 21:45:44.295356677 +0200 +@@ -1,7 +1,7 @@ + # ltmain.sh - Provide generalized library-building support services. + # NOTE: Changing this file will not affect anything until you rerun configure. + # +-# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001 ++# Copyright (C) 1996, 1997, 1998, 1999, 2000, 2001, 2003, 2004, 2005 + # Free Software Foundation, Inc. + # Originally by Gordon Matzigkeit , 1996 + # +@@ -17,13 +17,41 @@ + # + # You should have received a copy of the GNU General Public License + # along with this program; if not, write to the Free Software +-# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. ++# Foundation, Inc., 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301, USA. + # + # As a special exception to the GNU General Public License, if you + # distribute this file as part of a program that contains a + # configuration script generated by Autoconf, you may include it under + # the same distribution terms that you use for the rest of that program. + ++basename="s,^.*/,,g" ++ ++# Work around backward compatibility issue on IRIX 6.5. On IRIX 6.4+, sh ++# is ksh but when the shell is invoked as "sh" and the current value of ++# the _XPG environment variable is not equal to 1 (one), the special ++# positional parameter $0, within a function call, is the name of the ++# function. ++progpath="$0" ++ ++# The name of this program: ++progname=`echo "$progpath" | $SED $basename` ++modename="$progname" ++ ++# Global variables: ++EXIT_SUCCESS=0 ++EXIT_FAILURE=1 ++ ++PROGRAM=ltmain.sh ++PACKAGE=libtool ++VERSION="1.5.22 Debian 1.5.22-4" ++TIMESTAMP=" (1.1220.2.365 2005/12/18 22:14:06)" ++ ++# See if we are running on zsh, and set the options which allow our ++# commands through without removal of \ escapes. ++if test -n "${ZSH_VERSION+set}" ; then ++ setopt NO_GLOB_SUBST ++fi ++ + # Check that we have a working $echo. + if test "X$1" = X--no-reexec; then + # Discard the --no-reexec flag, and continue. +@@ -36,7 +64,7 @@ + : + else + # Restart under the correct shell, and then maybe $echo will work. +- exec $SHELL "$0" --no-reexec ${1+"$@"} ++ exec $SHELL "$progpath" --no-reexec ${1+"$@"} + fi + + if test "X$1" = X--fallback-echo; then +@@ -45,19 +73,9 @@ + cat <&2 +- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 +- exit 1 ++ $echo "$modename: not configured to build any kind of library" 1>&2 ++ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 ++ exit $EXIT_FAILURE + fi + + # Global variables. +@@ -111,11 +132,268 @@ + show="$echo" + show_help= + execute_dlfiles= ++duplicate_deps=no ++preserve_args= + lo2o="s/\\.lo\$/.${objext}/" + o2lo="s/\\.${objext}\$/.lo/" + ++##################################### ++# Shell function definitions: ++# This seems to be the best place for them ++ ++# func_mktempdir [string] ++# Make a temporary directory that won't clash with other running ++# libtool processes, and avoids race conditions if possible. If ++# given, STRING is the basename for that directory. ++func_mktempdir () ++{ ++ my_template="${TMPDIR-/tmp}/${1-$progname}" ++ ++ if test "$run" = ":"; then ++ # Return a directory name, but don't create it in dry-run mode ++ my_tmpdir="${my_template}-$$" ++ else ++ ++ # If mktemp works, use that first and foremost ++ my_tmpdir=`mktemp -d "${my_template}-XXXXXXXX" 2>/dev/null` ++ ++ if test ! -d "$my_tmpdir"; then ++ # Failing that, at least try and use $RANDOM to avoid a race ++ my_tmpdir="${my_template}-${RANDOM-0}$$" ++ ++ save_mktempdir_umask=`umask` ++ umask 0077 ++ $mkdir "$my_tmpdir" ++ umask $save_mktempdir_umask ++ fi ++ ++ # If we're not in dry-run mode, bomb out on failure ++ test -d "$my_tmpdir" || { ++ $echo "cannot create temporary directory \`$my_tmpdir'" 1>&2 ++ exit $EXIT_FAILURE ++ } ++ fi ++ ++ $echo "X$my_tmpdir" | $Xsed ++} ++ ++ ++# func_win32_libid arg ++# return the library type of file 'arg' ++# ++# Need a lot of goo to handle *both* DLLs and import libs ++# Has to be a shell function in order to 'eat' the argument ++# that is supplied when $file_magic_command is called. ++func_win32_libid () ++{ ++ win32_libid_type="unknown" ++ win32_fileres=`file -L $1 2>/dev/null` ++ case $win32_fileres in ++ *ar\ archive\ import\ library*) # definitely import ++ win32_libid_type="x86 archive import" ++ ;; ++ *ar\ archive*) # could be an import, or static ++ if eval $OBJDUMP -f $1 | $SED -e '10q' 2>/dev/null | \ ++ $EGREP -e 'file format pe-i386(.*architecture: i386)?' >/dev/null ; then ++ win32_nmres=`eval $NM -f posix -A $1 | \ ++ $SED -n -e '1,100{/ I /{s,.*,import,;p;q;};}'` ++ case $win32_nmres in ++ import*) win32_libid_type="x86 archive import";; ++ *) win32_libid_type="x86 archive static";; ++ esac ++ fi ++ ;; ++ *DLL*) ++ win32_libid_type="x86 DLL" ++ ;; ++ *executable*) # but shell scripts are "executable" too... ++ case $win32_fileres in ++ *MS\ Windows\ PE\ Intel*) ++ win32_libid_type="x86 DLL" ++ ;; ++ esac ++ ;; ++ esac ++ $echo $win32_libid_type ++} ++ ++ ++# func_infer_tag arg ++# Infer tagged configuration to use if any are available and ++# if one wasn't chosen via the "--tag" command line option. ++# Only attempt this if the compiler in the base compile ++# command doesn't match the default compiler. ++# arg is usually of the form 'gcc ...' ++func_infer_tag () ++{ ++ if test -n "$available_tags" && test -z "$tagname"; then ++ CC_quoted= ++ for arg in $CC; do ++ case $arg in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ arg="\"$arg\"" ++ ;; ++ esac ++ CC_quoted="$CC_quoted $arg" ++ done ++ case $@ in ++ # Blanks in the command may have been stripped by the calling shell, ++ # but not from the CC environment variable when configure was run. ++ " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ;; ++ # Blanks at the start of $base_compile will cause this to fail ++ # if we don't check for them as well. ++ *) ++ for z in $available_tags; do ++ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $z$" < "$progpath" > /dev/null; then ++ # Evaluate the configuration. ++ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$z'$/,/^# ### END LIBTOOL TAG CONFIG: '$z'$/p' < $progpath`" ++ CC_quoted= ++ for arg in $CC; do ++ # Double-quote args containing other shell metacharacters. ++ case $arg in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ arg="\"$arg\"" ++ ;; ++ esac ++ CC_quoted="$CC_quoted $arg" ++ done ++ case "$@ " in ++ " $CC "* | "$CC "* | " `$echo $CC` "* | "`$echo $CC` "* | " $CC_quoted"* | "$CC_quoted "* | " `$echo $CC_quoted` "* | "`$echo $CC_quoted` "*) ++ # The compiler in the base compile command matches ++ # the one in the tagged configuration. ++ # Assume this is the tagged configuration we want. ++ tagname=$z ++ break ++ ;; ++ esac ++ fi ++ done ++ # If $tagname still isn't set, then no tagged configuration ++ # was found and let the user know that the "--tag" command ++ # line option must be used. ++ if test -z "$tagname"; then ++ $echo "$modename: unable to infer tagged configuration" ++ $echo "$modename: specify a tag with \`--tag'" 1>&2 ++ exit $EXIT_FAILURE ++# else ++# $echo "$modename: using $tagname tagged configuration" ++ fi ++ ;; ++ esac ++ fi ++} ++ ++ ++# func_extract_an_archive dir oldlib ++func_extract_an_archive () ++{ ++ f_ex_an_ar_dir="$1"; shift ++ f_ex_an_ar_oldlib="$1" ++ ++ $show "(cd $f_ex_an_ar_dir && $AR x $f_ex_an_ar_oldlib)" ++ $run eval "(cd \$f_ex_an_ar_dir && $AR x \$f_ex_an_ar_oldlib)" || exit $? ++ if ($AR t "$f_ex_an_ar_oldlib" | sort | sort -uc >/dev/null 2>&1); then ++ : ++ else ++ $echo "$modename: ERROR: object name conflicts: $f_ex_an_ar_dir/$f_ex_an_ar_oldlib" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++} ++ ++# func_extract_archives gentop oldlib ... ++func_extract_archives () ++{ ++ my_gentop="$1"; shift ++ my_oldlibs=${1+"$@"} ++ my_oldobjs="" ++ my_xlib="" ++ my_xabs="" ++ my_xdir="" ++ my_status="" ++ ++ $show "${rm}r $my_gentop" ++ $run ${rm}r "$my_gentop" ++ $show "$mkdir $my_gentop" ++ $run $mkdir "$my_gentop" ++ my_status=$? ++ if test "$my_status" -ne 0 && test ! -d "$my_gentop"; then ++ exit $my_status ++ fi ++ ++ for my_xlib in $my_oldlibs; do ++ # Extract the objects. ++ case $my_xlib in ++ [\\/]* | [A-Za-z]:[\\/]*) my_xabs="$my_xlib" ;; ++ *) my_xabs=`pwd`"/$my_xlib" ;; ++ esac ++ my_xlib=`$echo "X$my_xlib" | $Xsed -e 's%^.*/%%'` ++ my_xdir="$my_gentop/$my_xlib" ++ ++ $show "${rm}r $my_xdir" ++ $run ${rm}r "$my_xdir" ++ $show "$mkdir $my_xdir" ++ $run $mkdir "$my_xdir" ++ exit_status=$? ++ if test "$exit_status" -ne 0 && test ! -d "$my_xdir"; then ++ exit $exit_status ++ fi ++ case $host in ++ *-darwin*) ++ $show "Extracting $my_xabs" ++ # Do not bother doing anything if just a dry run ++ if test -z "$run"; then ++ darwin_orig_dir=`pwd` ++ cd $my_xdir || exit $? ++ darwin_archive=$my_xabs ++ darwin_curdir=`pwd` ++ darwin_base_archive=`$echo "X$darwin_archive" | $Xsed -e 's%^.*/%%'` ++ darwin_arches=`lipo -info "$darwin_archive" 2>/dev/null | $EGREP Architectures 2>/dev/null` ++ if test -n "$darwin_arches"; then ++ darwin_arches=`echo "$darwin_arches" | $SED -e 's/.*are://'` ++ darwin_arch= ++ $show "$darwin_base_archive has multiple architectures $darwin_arches" ++ for darwin_arch in $darwin_arches ; do ++ mkdir -p "unfat-$$/${darwin_base_archive}-${darwin_arch}" ++ lipo -thin $darwin_arch -output "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" "${darwin_archive}" ++ cd "unfat-$$/${darwin_base_archive}-${darwin_arch}" ++ func_extract_an_archive "`pwd`" "${darwin_base_archive}" ++ cd "$darwin_curdir" ++ $rm "unfat-$$/${darwin_base_archive}-${darwin_arch}/${darwin_base_archive}" ++ done # $darwin_arches ++ ## Okay now we have a bunch of thin objects, gotta fatten them up :) ++ darwin_filelist=`find unfat-$$ -type f -name \*.o -print -o -name \*.lo -print| xargs basename | sort -u | $NL2SP` ++ darwin_file= ++ darwin_files= ++ for darwin_file in $darwin_filelist; do ++ darwin_files=`find unfat-$$ -name $darwin_file -print | $NL2SP` ++ lipo -create -output "$darwin_file" $darwin_files ++ done # $darwin_filelist ++ ${rm}r unfat-$$ ++ cd "$darwin_orig_dir" ++ else ++ cd "$darwin_orig_dir" ++ func_extract_an_archive "$my_xdir" "$my_xabs" ++ fi # $darwin_arches ++ fi # $run ++ ;; ++ *) ++ func_extract_an_archive "$my_xdir" "$my_xabs" ++ ;; ++ esac ++ my_oldobjs="$my_oldobjs "`find $my_xdir -name \*.$objext -print -o -name \*.lo -print | $NL2SP` ++ done ++ func_extract_archives_result="$my_oldobjs" ++} ++# End of Shell function definitions ++##################################### ++ ++# Darwin sucks ++eval std_shrext=\"$shrext_cmds\" ++ ++disable_libs=no ++ + # Parse our command line options once, thoroughly. +-while test $# -gt 0 ++while test "$#" -gt 0 + do + arg="$1" + shift +@@ -131,6 +409,34 @@ + execute_dlfiles) + execute_dlfiles="$execute_dlfiles $arg" + ;; ++ tag) ++ tagname="$arg" ++ preserve_args="${preserve_args}=$arg" ++ ++ # Check whether tagname contains only valid characters ++ case $tagname in ++ *[!-_A-Za-z0-9,/]*) ++ $echo "$progname: invalid tag name: $tagname" 1>&2 ++ exit $EXIT_FAILURE ++ ;; ++ esac ++ ++ case $tagname in ++ CC) ++ # Don't test for the "default" C tag, as we know, it's there, but ++ # not specially marked. ++ ;; ++ *) ++ if grep "^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$" < "$progpath" > /dev/null; then ++ taglist="$taglist $tagname" ++ # Evaluate the configuration. ++ eval "`${SED} -n -e '/^# ### BEGIN LIBTOOL TAG CONFIG: '$tagname'$/,/^# ### END LIBTOOL TAG CONFIG: '$tagname'$/p' < $progpath`" ++ else ++ $echo "$progname: ignoring unknown tag $tagname" 1>&2 ++ fi ++ ;; ++ esac ++ ;; + *) + eval "$prev=\$arg" + ;; +@@ -148,18 +454,27 @@ + ;; + + --version) +- echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" +- exit 0 ++ $echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" ++ $echo ++ $echo "Copyright (C) 2005 Free Software Foundation, Inc." ++ $echo "This is free software; see the source for copying conditions. There is NO" ++ $echo "warranty; not even for MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE." ++ exit $? + ;; + + --config) +- ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $0 +- exit 0 ++ ${SED} -e '1,/^# ### BEGIN LIBTOOL CONFIG/d' -e '/^# ### END LIBTOOL CONFIG/,$d' $progpath ++ # Now print the configurations for the tags. ++ for tagname in $taglist; do ++ ${SED} -n -e "/^# ### BEGIN LIBTOOL TAG CONFIG: $tagname$/,/^# ### END LIBTOOL TAG CONFIG: $tagname$/p" < "$progpath" ++ done ++ exit $? + ;; + + --debug) +- echo "$progname: enabling shell trace mode" ++ $echo "$progname: enabling shell trace mode" + set -x ++ preserve_args="$preserve_args $arg" + ;; + + --dry-run | -n) +@@ -167,18 +482,18 @@ + ;; + + --features) +- echo "host: $host" ++ $echo "host: $host" + if test "$build_libtool_libs" = yes; then +- echo "enable shared libraries" ++ $echo "enable shared libraries" + else +- echo "disable shared libraries" ++ $echo "disable shared libraries" + fi + if test "$build_old_libs" = yes; then +- echo "enable static libraries" ++ $echo "enable static libraries" + else +- echo "disable static libraries" ++ $echo "disable static libraries" + fi +- exit 0 ++ exit $? + ;; + + --finish) mode="finish" ;; +@@ -190,6 +505,19 @@ + + --quiet | --silent) + show=: ++ preserve_args="$preserve_args $arg" ++ ;; ++ ++ --tag) ++ prevopt="--tag" ++ prev=tag ++ preserve_args="$preserve_args --tag" ++ ;; ++ --tag=*) ++ set tag "$optarg" ${1+"$@"} ++ shift ++ prev=tag ++ preserve_args="$preserve_args --tag" + ;; + + -dlopen) +@@ -200,7 +528,7 @@ + -*) + $echo "$modename: unrecognized option \`$arg'" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + + *) +@@ -213,9 +541,21 @@ + if test -n "$prevopt"; then + $echo "$modename: option \`$prevopt' requires an argument" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + ++case $disable_libs in ++no) ++ ;; ++shared) ++ build_libtool_libs=no ++ build_old_libs=yes ++ ;; ++static) ++ build_old_libs=`case $build_libtool_libs in yes) echo no;; *) echo yes;; esac` ++ ;; ++esac ++ + # If this variable is set in any of the actions, the command in it + # will be execed at the end. This prevents here-documents from being + # left over by shells. +@@ -225,8 +565,10 @@ + + # Infer the operation mode. + if test -z "$mode"; then ++ $echo "*** Warning: inferring the mode of operation is deprecated." 1>&2 ++ $echo "*** Future versions of Libtool will require --mode=MODE be specified." 1>&2 + case $nonopt in +- *cc | *++ | gcc* | *-gcc* | g++* | xlc*) ++ *cc | cc* | *++ | gcc* | *-gcc* | g++* | xlc*) + mode=link + for arg + do +@@ -267,7 +609,7 @@ + if test -n "$execute_dlfiles" && test "$mode" != execute; then + $echo "$modename: unrecognized option \`-dlopen'" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + # Change the help message to a mode-specific one. +@@ -281,158 +623,127 @@ + modename="$modename: compile" + # Get the compilation command and the source file. + base_compile= +- prev= +- lastarg= +- srcfile="$nonopt" ++ srcfile="$nonopt" # always keep a non-empty value in "srcfile" ++ suppress_opt=yes + suppress_output= ++ arg_mode=normal ++ libobj= ++ later= + +- user_target=no + for arg + do +- case $prev in +- "") ;; +- xcompiler) +- # Aesthetically quote the previous argument. +- prev= +- lastarg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` +- +- case $arg in +- # Double-quote args containing other shell metacharacters. +- # Many Bourne shells cannot handle close brackets correctly +- # in scan sets, so we specify it separately. +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- +- # Add the previous argument to base_compile. +- if test -z "$base_compile"; then +- base_compile="$lastarg" +- else +- base_compile="$base_compile $lastarg" +- fi +- continue ++ case $arg_mode in ++ arg ) ++ # do not "continue". Instead, add this to base_compile ++ lastarg="$arg" ++ arg_mode=normal + ;; +- esac + +- # Accept any command-line options. +- case $arg in +- -o) +- if test "$user_target" != "no"; then +- $echo "$modename: you cannot specify \`-o' more than once" 1>&2 +- exit 1 +- fi +- user_target=next +- ;; +- +- -static) +- build_old_libs=yes ++ target ) ++ libobj="$arg" ++ arg_mode=normal + continue + ;; + +- -prefer-pic) +- pic_mode=yes +- continue +- ;; ++ normal ) ++ # Accept any command-line options. ++ case $arg in ++ -o) ++ if test -n "$libobj" ; then ++ $echo "$modename: you cannot specify \`-o' more than once" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ arg_mode=target ++ continue ++ ;; + +- -prefer-non-pic) +- pic_mode=no +- continue +- ;; ++ -static | -prefer-pic | -prefer-non-pic) ++ later="$later $arg" ++ continue ++ ;; + +- -Xcompiler) +- prev=xcompiler +- continue +- ;; ++ -no-suppress) ++ suppress_opt=no ++ continue ++ ;; + +- -Wc,*) +- args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` +- lastarg= +- save_ifs="$IFS"; IFS=',' +- for arg in $args; do +- IFS="$save_ifs" ++ -Xcompiler) ++ arg_mode=arg # the next one goes into the "base_compile" arg list ++ continue # The current "srcfile" will either be retained or ++ ;; # replaced later. I would guess that would be a bug. ++ ++ -Wc,*) ++ args=`$echo "X$arg" | $Xsed -e "s/^-Wc,//"` ++ lastarg= ++ save_ifs="$IFS"; IFS=',' ++ for arg in $args; do ++ IFS="$save_ifs" + +- # Double-quote args containing other shell metacharacters. +- # Many Bourne shells cannot handle close brackets correctly +- # in scan sets, so we specify it separately. +- case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") +- arg="\"$arg\"" +- ;; +- esac +- lastarg="$lastarg $arg" +- done +- IFS="$save_ifs" +- lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` ++ # Double-quote args containing other shell metacharacters. ++ # Many Bourne shells cannot handle close brackets correctly ++ # in scan sets, so we specify it separately. ++ case $arg in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ arg="\"$arg\"" ++ ;; ++ esac ++ lastarg="$lastarg $arg" ++ done ++ IFS="$save_ifs" ++ lastarg=`$echo "X$lastarg" | $Xsed -e "s/^ //"` + +- # Add the arguments to base_compile. +- if test -z "$base_compile"; then +- base_compile="$lastarg" +- else ++ # Add the arguments to base_compile. + base_compile="$base_compile $lastarg" +- fi +- continue +- ;; +- esac ++ continue ++ ;; + +- case $user_target in +- next) +- # The next one is the -o target name +- user_target=yes +- continue +- ;; +- yes) +- # We got the output file +- user_target=set +- libobj="$arg" +- continue ++ * ) ++ # Accept the current argument as the source file. ++ # The previous "srcfile" becomes the current argument. ++ # ++ lastarg="$srcfile" ++ srcfile="$arg" ++ ;; ++ esac # case $arg + ;; +- esac +- +- # Accept the current argument as the source file. +- lastarg="$srcfile" +- srcfile="$arg" ++ esac # case $arg_mode + + # Aesthetically quote the previous argument. +- +- # Backslashify any backslashes, double quotes, and dollar signs. +- # These are the only characters that are still specially +- # interpreted inside of double-quoted scrings. + lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` + ++ case $lastarg in + # Double-quote args containing other shell metacharacters. + # Many Bourne shells cannot handle close brackets correctly +- # in scan sets, so we specify it separately. +- case $lastarg in ++ # in scan sets, and some SunOS ksh mistreat backslash-escaping ++ # in scan sets (worked around with variable expansion), ++ # and furthermore cannot handle '|' '&' '(' ')' in scan sets ++ # at all, so we specify them separately. + *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + lastarg="\"$lastarg\"" + ;; + esac + +- # Add the previous argument to base_compile. +- if test -z "$base_compile"; then +- base_compile="$lastarg" +- else +- base_compile="$base_compile $lastarg" +- fi +- done ++ base_compile="$base_compile $lastarg" ++ done # for arg + +- case $user_target in +- set) ++ case $arg_mode in ++ arg) ++ $echo "$modename: you must specify an argument for -Xcompile" ++ exit $EXIT_FAILURE + ;; +- no) +- # Get the name of the library object. +- libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` ++ target) ++ $echo "$modename: you must specify a target with \`-o'" 1>&2 ++ exit $EXIT_FAILURE + ;; + *) +- $echo "$modename: you must specify a target with \`-o'" 1>&2 +- exit 1 ++ # Get the name of the library object. ++ [ -z "$libobj" ] && libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` + ;; + esac + + # Recognize several different file suffixes. + # If the user specifies -o file.o, it is replaced with file.lo +- xform='[cCFSfmso]' ++ xform='[cCFSifmso]' + case $libobj in + *.ada) xform=ada ;; + *.adb) xform=adb ;; +@@ -440,10 +751,13 @@ + *.asm) xform=asm ;; + *.c++) xform=c++ ;; + *.cc) xform=cc ;; ++ *.ii) xform=ii ;; ++ *.class) xform=class ;; + *.cpp) xform=cpp ;; + *.cxx) xform=cxx ;; + *.f90) xform=f90 ;; + *.for) xform=for ;; ++ *.java) xform=java ;; + esac + + libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` +@@ -452,25 +766,63 @@ + *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; + *) + $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + esac + ++ func_infer_tag $base_compile ++ ++ for arg in $later; do ++ case $arg in ++ -static) ++ build_old_libs=yes ++ continue ++ ;; ++ ++ -prefer-pic) ++ pic_mode=yes ++ continue ++ ;; ++ ++ -prefer-non-pic) ++ pic_mode=no ++ continue ++ ;; ++ esac ++ done ++ ++ qlibobj=`$echo "X$libobj" | $Xsed -e "$sed_quote_subst"` ++ case $qlibobj in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ qlibobj="\"$qlibobj\"" ;; ++ esac ++ test "X$libobj" != "X$qlibobj" \ ++ && $echo "X$libobj" | grep '[]~#^*{};<>?"'"'"' &()|`$[]' \ ++ && $echo "$modename: libobj name \`$libobj' may not contain shell special characters." ++ objname=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` ++ xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` ++ if test "X$xdir" = "X$obj"; then ++ xdir= ++ else ++ xdir=$xdir/ ++ fi ++ lobj=${xdir}$objdir/$objname ++ + if test -z "$base_compile"; then + $echo "$modename: you must specify a compilation command" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + # Delete any leftover library objects. + if test "$build_old_libs" = yes; then +- removelist="$obj $libobj" ++ removelist="$obj $lobj $libobj ${libobj}T" + else +- removelist="$libobj" ++ removelist="$lobj $libobj ${libobj}T" + fi + + $run $rm $removelist +- trap "$run $rm $removelist; exit 1" 1 2 15 ++ trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 + + # On Cygwin there's no "real" PIC flag so we must build both object types + case $host_os in +@@ -489,8 +841,9 @@ + output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\.[^.]*$%%'`.${objext} + lockfile="$output_obj.lock" + removelist="$removelist $output_obj $lockfile" +- trap "$run $rm $removelist; exit 1" 1 2 15 ++ trap "$run $rm $removelist; exit $EXIT_FAILURE" 1 2 15 + else ++ output_obj= + need_locks=no + lockfile= + fi +@@ -498,13 +851,13 @@ + # Lock this critical section if it is needed + # We use this script file to make the link, it avoids creating a new file + if test "$need_locks" = yes; then +- until $run ln "$0" "$lockfile" 2>/dev/null; do ++ until $run ln "$progpath" "$lockfile" 2>/dev/null; do + $show "Waiting for $lockfile to be removed" + sleep 2 + done + elif test "$need_locks" = warn; then + if test -f "$lockfile"; then +- echo "\ ++ $echo "\ + *** ERROR, $lockfile exists and contains: + `cat $lockfile 2>/dev/null` + +@@ -516,14 +869,33 @@ + compiler." + + $run $rm $removelist +- exit 1 ++ exit $EXIT_FAILURE + fi +- echo $srcfile > "$lockfile" ++ $echo "$srcfile" > "$lockfile" + fi + + if test -n "$fix_srcfile_path"; then + eval srcfile=\"$fix_srcfile_path\" + fi ++ qsrcfile=`$echo "X$srcfile" | $Xsed -e "$sed_quote_subst"` ++ case $qsrcfile in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ qsrcfile="\"$qsrcfile\"" ;; ++ esac ++ ++ $run $rm "$libobj" "${libobj}T" ++ ++ # Create a libtool object file (analogous to a ".la" file), ++ # but don't create it if we're doing a dry run. ++ test -z "$run" && cat > ${libobj}T </dev/null`" != x"$srcfile"; then +- echo "\ ++ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then ++ $echo "\ + *** ERROR, $lockfile contains: + `cat $lockfile 2>/dev/null` + +@@ -592,13 +949,13 @@ + compiler." + + $run $rm $removelist +- exit 1 ++ exit $EXIT_FAILURE + fi + + # Just move the object if needed, then go on to compile the next one +- if test x"$output_obj" != x"$libobj"; then +- $show "$mv $output_obj $libobj" +- if $run $mv $output_obj $libobj; then : ++ if test -n "$output_obj" && test "X$output_obj" != "X$lobj"; then ++ $show "$mv $output_obj $lobj" ++ if $run $mv $output_obj $lobj; then : + else + error=$? + $run $rm $removelist +@@ -606,77 +963,50 @@ + fi + fi + +- # If we have no pic_flag, then copy the object into place and finish. +- if (test -z "$pic_flag" || test "$pic_mode" != default) && +- test "$build_old_libs" = yes; then +- # Rename the .lo from within objdir to obj +- if test -f $obj; then +- $show $rm $obj +- $run $rm $obj +- fi ++ # Append the name of the PIC object to the libtool object file. ++ test -z "$run" && cat >> ${libobj}T <> ${libobj}T </dev/null`" != x"$srcfile"; then +- echo "\ ++ test "X`cat $lockfile 2>/dev/null`" != "X$srcfile"; then ++ $echo "\ + *** ERROR, $lockfile contains: + `cat $lockfile 2>/dev/null` + +@@ -691,11 +1021,11 @@ + compiler." + + $run $rm $removelist +- exit 1 ++ exit $EXIT_FAILURE + fi + + # Just move the object if needed +- if test x"$output_obj" != x"$obj"; then ++ if test -n "$output_obj" && test "X$output_obj" != "X$obj"; then + $show "$mv $output_obj $obj" + if $run $mv $output_obj $obj; then : + else +@@ -705,29 +1035,31 @@ + fi + fi + +- # Create an invalid libtool object if no PIC, so that we do not +- # accidentally link it into a program. +- if test "$build_libtool_libs" != yes; then +- $show "echo timestamp > $libobj" +- $run eval "echo timestamp > \$libobj" || exit $? +- else +- # Move the .lo from within objdir +- $show "$mv $libobj $lo_libobj" +- if $run $mv $libobj $lo_libobj; then : +- else +- error=$? +- $run $rm $removelist +- exit $error +- fi +- fi ++ # Append the name of the non-PIC object the libtool object file. ++ # Only append if the libtool object file exists. ++ test -z "$run" && cat >> ${libobj}T <> ${libobj}T </dev/null 2>&1; then ++ pic_object= ++ non_pic_object= ++ ++ # Read the .lo file ++ # If there is no directory component, then add one. ++ case $arg in ++ */* | *\\*) . $arg ;; ++ *) . ./$arg ;; ++ esac ++ ++ if test -z "$pic_object" || \ ++ test -z "$non_pic_object" || ++ test "$pic_object" = none && \ ++ test "$non_pic_object" = none; then ++ $echo "$modename: cannot find name of object for \`$arg'" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ # Extract subdirectory from the argument. ++ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` ++ if test "X$xdir" = "X$arg"; then ++ xdir= ++ else ++ xdir="$xdir/" ++ fi ++ ++ if test "$pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ pic_object="$xdir$pic_object" ++ ++ if test "$prev" = dlfiles; then ++ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then ++ dlfiles="$dlfiles $pic_object" ++ prev= ++ continue ++ else ++ # If libtool objects are unsupported, then we need to preload. ++ prev=dlprefiles ++ fi ++ fi ++ ++ # CHECK ME: I think I busted this. -Ossama ++ if test "$prev" = dlprefiles; then ++ # Preload the old-style object. ++ dlprefiles="$dlprefiles $pic_object" ++ prev= ++ fi ++ ++ # A PIC object. ++ libobjs="$libobjs $pic_object" ++ arg="$pic_object" ++ fi ++ ++ # Non-PIC object. ++ if test "$non_pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ non_pic_object="$xdir$non_pic_object" ++ ++ # A standard non-PIC object ++ non_pic_objects="$non_pic_objects $non_pic_object" ++ if test -z "$pic_object" || test "$pic_object" = none ; then ++ arg="$non_pic_object" ++ fi ++ else ++ # If the PIC object exists, use it instead. ++ # $xdir was prepended to $pic_object above. ++ non_pic_object="$pic_object" ++ non_pic_objects="$non_pic_objects $non_pic_object" ++ fi ++ else ++ # Only an error if not doing a dry-run. ++ if test -z "$run"; then ++ $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 ++ exit $EXIT_FAILURE ++ else ++ # Dry-run case. ++ ++ # Extract subdirectory from the argument. ++ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` ++ if test "X$xdir" = "X$arg"; then ++ xdir= ++ else ++ xdir="$xdir/" ++ fi ++ ++ pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` ++ non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` ++ libobjs="$libobjs $pic_object" ++ non_pic_objects="$non_pic_objects $non_pic_object" ++ fi ++ fi ++ done ++ else ++ $echo "$modename: link input file \`$save_arg' does not exist" ++ exit $EXIT_FAILURE ++ fi ++ arg=$save_arg ++ prev= ++ continue ++ ;; + rpath | xrpath) + # We need an absolute path. + case $arg in + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + $echo "$modename: only absolute run-paths are allowed" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + esac + if test "$prev" = rpath; then +@@ -947,13 +1404,33 @@ + finalize_command="$finalize_command $wl$qarg" + continue + ;; ++ xcclinker) ++ linker_flags="$linker_flags $qarg" ++ compiler_flags="$compiler_flags $qarg" ++ prev= ++ compile_command="$compile_command $qarg" ++ finalize_command="$finalize_command $qarg" ++ continue ++ ;; ++ shrext) ++ shrext_cmds="$arg" ++ prev= ++ continue ++ ;; ++ darwin_framework|darwin_framework_skip) ++ test "$prev" = "darwin_framework" && compiler_flags="$compiler_flags $arg" ++ compile_command="$compile_command $arg" ++ finalize_command="$finalize_command $arg" ++ prev= ++ continue ++ ;; + *) + eval "$prev=\"\$arg\"" + prev= + continue + ;; + esac +- fi # test -n $prev ++ fi # test -n "$prev" + + prevarg="$arg" + +@@ -995,7 +1472,7 @@ + -export-symbols | -export-symbols-regex) + if test -n "$export_symbols" || test -n "$export_symbols_regex"; then + $echo "$modename: more than one -exported-symbols argument is not allowed" +- exit 1 ++ exit $EXIT_FAILURE + fi + if test "X$arg" = "X-export-symbols"; then + prev=expsyms +@@ -1005,16 +1482,28 @@ + continue + ;; + ++ -framework|-arch|-isysroot) ++ case " $CC " in ++ *" ${arg} ${1} "* | *" ${arg} ${1} "*) ++ prev=darwin_framework_skip ;; ++ *) compiler_flags="$compiler_flags $arg" ++ prev=darwin_framework ;; ++ esac ++ compile_command="$compile_command $arg" ++ finalize_command="$finalize_command $arg" ++ continue ++ ;; ++ + -inst-prefix-dir) +- prev=inst_prefix +- continue +- ;; ++ prev=inst_prefix ++ continue ++ ;; + + # The native IRIX linker understands -LANG:*, -LIST:* and -LNO:* + # so, if we see these flags be careful not to treat them like -L + -L[A-Z][A-Z]*:*) + case $with_gcc/$host in +- no/*-*-irix* | no/*-*-nonstopux*) ++ no/*-*-irix* | /*-*-irix*) + compile_command="$compile_command $arg" + finalize_command="$finalize_command $arg" + ;; +@@ -1031,7 +1520,8 @@ + absdir=`cd "$dir" && pwd` + if test -z "$absdir"; then + $echo "$modename: cannot determine absolute directory name of \`$dir'" 1>&2 +- exit 1 ++ absdir="$dir" ++ notinst_path="$notinst_path $dir" + fi + dir="$absdir" + ;; +@@ -1045,10 +1535,15 @@ + esac + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) ++ testbindir=`$echo "X$dir" | $Xsed -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$dir:"*) ;; + *) dllsearchpath="$dllsearchpath:$dir";; + esac ++ case :$dllsearchpath: in ++ *":$testbindir:"*) ;; ++ *) dllsearchpath="$dllsearchpath:$testbindir";; ++ esac + ;; + esac + continue +@@ -1057,36 +1552,98 @@ + -l*) + if test "X$arg" = "X-lc" || test "X$arg" = "X-lm"; then + case $host in +- *-*-cygwin* | *-*-pw32* | *-*-beos*) ++ *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-beos*) + # These systems don't actually have a C or math library (as such) + continue + ;; +- *-*-mingw* | *-*-os2*) ++ *-*-os2*) + # These systems don't actually have a C library (as such) + test "X$arg" = "X-lc" && continue + ;; +- *-*-openbsd* | *-*-freebsd*) ++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + test "X$arg" = "X-lc" && continue + ;; +- esac +- elif test "X$arg" = "X-lc_r"; then +- case $host in +- *-*-openbsd* | *-*-freebsd*) +- # Do not include libc_r directly, use -pthread flag. ++ *-*-rhapsody* | *-*-darwin1.[012]) ++ # Rhapsody C and math libraries are in the System framework ++ deplibs="$deplibs -framework System" + continue + ;; ++ *-*-sco3.2v5* | *-*-sco5v6*) ++ # Causes problems with __ctype ++ test "X$arg" = "X-lc" && continue ++ ;; ++ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) ++ # Compiler inserts libc in the correct place for threads to work ++ test "X$arg" = "X-lc" && continue ++ ;; + esac ++ elif test "X$arg" = "X-lc_r"; then ++ case $host in ++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) ++ # Do not include libc_r directly, use -pthread flag. ++ continue ++ ;; ++ esac + fi + deplibs="$deplibs $arg" + continue + ;; + ++ # Tru64 UNIX uses -model [arg] to determine the layout of C++ ++ # classes, name mangling, and exception handling. ++ -model) ++ compile_command="$compile_command $arg" ++ compiler_flags="$compiler_flags $arg" ++ finalize_command="$finalize_command $arg" ++ prev=xcompiler ++ continue ++ ;; ++ ++ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) ++ compiler_flags="$compiler_flags $arg" ++ compile_command="$compile_command $arg" ++ finalize_command="$finalize_command $arg" ++ continue ++ ;; ++ + -module) + module=yes + continue + ;; + ++ # -64, -mips[0-9] enable 64-bit mode on the SGI compiler ++ # -r[0-9][0-9]* specifies the processor on the SGI compiler ++ # -xarch=*, -xtarget=* enable 64-bit mode on the Sun compiler ++ # +DA*, +DD* enable 64-bit mode on the HP compiler ++ # -q* pass through compiler args for the IBM compiler ++ # -m* pass through architecture-specific compiler args for GCC ++ # -m*, -t[45]*, -txscale* pass through architecture-specific ++ # compiler args for GCC ++ # -pg pass through profiling flag for GCC ++ # @file GCC response files ++ -64|-mips[0-9]|-r[0-9][0-9]*|-xarch=*|-xtarget=*|+DA*|+DD*|-q*|-m*|-pg| \ ++ -t[45]*|-txscale*|@*) ++ ++ # Unknown arguments in both finalize_command and compile_command need ++ # to be aesthetically quoted because they are evaled later. ++ arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` ++ case $arg in ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") ++ arg="\"$arg\"" ++ ;; ++ esac ++ compile_command="$compile_command $arg" ++ finalize_command="$finalize_command $arg" ++ compiler_flags="$compiler_flags $arg" ++ continue ++ ;; ++ ++ -shrext) ++ prev=shrext ++ continue ++ ;; ++ + -no-fast-install) + fast_install=no + continue +@@ -1111,8 +1668,18 @@ + continue + ;; + ++ -objectlist) ++ prev=objectlist ++ continue ++ ;; ++ + -o) prev=output ;; + ++ -precious-files-regex) ++ prev=precious_regex ++ continue ++ ;; ++ + -release) + prev=release + continue +@@ -1135,7 +1702,7 @@ + [\\/]* | [A-Za-z]:[\\/]*) ;; + *) + $echo "$modename: only absolute run-paths are allowed" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + esac + case "$xrpath " in +@@ -1163,6 +1730,11 @@ + prev=vinfo + continue + ;; ++ -version-number) ++ prev=vinfo ++ vinfo_number=yes ++ continue ++ ;; + + -Wc,*) + args=`$echo "X$arg" | $Xsed -e "$sed_quote_subst" -e 's/^-Wc,//'` +@@ -1211,6 +1783,11 @@ + continue + ;; + ++ -XCClinker) ++ prev=xcclinker ++ continue ++ ;; ++ + # Some other compiler flag. + -* | +*) + # Unknown arguments in both finalize_command and compile_command need +@@ -1223,29 +1800,106 @@ + esac + ;; + +- *.lo | *.$objext) +- # A library or standard object. +- if test "$prev" = dlfiles; then +- # This file was specified with -dlopen. +- if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then +- dlfiles="$dlfiles $arg" +- prev= +- continue +- else +- # If libtool objects are unsupported, then we need to preload. +- prev=dlprefiles ++ *.$objext) ++ # A standard object. ++ objs="$objs $arg" ++ ;; ++ ++ *.lo) ++ # A libtool-controlled object. ++ ++ # Check to see that this really is a libtool object. ++ if (${SED} -e '2q' $arg | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then ++ pic_object= ++ non_pic_object= ++ ++ # Read the .lo file ++ # If there is no directory component, then add one. ++ case $arg in ++ */* | *\\*) . $arg ;; ++ *) . ./$arg ;; ++ esac ++ ++ if test -z "$pic_object" || \ ++ test -z "$non_pic_object" || ++ test "$pic_object" = none && \ ++ test "$non_pic_object" = none; then ++ $echo "$modename: cannot find name of object for \`$arg'" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ # Extract subdirectory from the argument. ++ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` ++ if test "X$xdir" = "X$arg"; then ++ xdir= ++ else ++ xdir="$xdir/" ++ fi ++ ++ if test "$pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ pic_object="$xdir$pic_object" ++ ++ if test "$prev" = dlfiles; then ++ if test "$build_libtool_libs" = yes && test "$dlopen_support" = yes; then ++ dlfiles="$dlfiles $pic_object" ++ prev= ++ continue ++ else ++ # If libtool objects are unsupported, then we need to preload. ++ prev=dlprefiles ++ fi ++ fi ++ ++ # CHECK ME: I think I busted this. -Ossama ++ if test "$prev" = dlprefiles; then ++ # Preload the old-style object. ++ dlprefiles="$dlprefiles $pic_object" ++ prev= ++ fi ++ ++ # A PIC object. ++ libobjs="$libobjs $pic_object" ++ arg="$pic_object" + fi +- fi + +- if test "$prev" = dlprefiles; then +- # Preload the old-style object. +- dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"` +- prev= ++ # Non-PIC object. ++ if test "$non_pic_object" != none; then ++ # Prepend the subdirectory the object is found in. ++ non_pic_object="$xdir$non_pic_object" ++ ++ # A standard non-PIC object ++ non_pic_objects="$non_pic_objects $non_pic_object" ++ if test -z "$pic_object" || test "$pic_object" = none ; then ++ arg="$non_pic_object" ++ fi ++ else ++ # If the PIC object exists, use it instead. ++ # $xdir was prepended to $pic_object above. ++ non_pic_object="$pic_object" ++ non_pic_objects="$non_pic_objects $non_pic_object" ++ fi + else +- case $arg in +- *.lo) libobjs="$libobjs $arg" ;; +- *) objs="$objs $arg" ;; +- esac ++ # Only an error if not doing a dry-run. ++ if test -z "$run"; then ++ $echo "$modename: \`$arg' is not a valid libtool object" 1>&2 ++ exit $EXIT_FAILURE ++ else ++ # Dry-run case. ++ ++ # Extract subdirectory from the argument. ++ xdir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` ++ if test "X$xdir" = "X$arg"; then ++ xdir= ++ else ++ xdir="$xdir/" ++ fi ++ ++ pic_object=`$echo "X${xdir}${objdir}/${arg}" | $Xsed -e "$lo2o"` ++ non_pic_object=`$echo "X${xdir}${arg}" | $Xsed -e "$lo2o"` ++ libobjs="$libobjs $pic_object" ++ non_pic_objects="$non_pic_objects $non_pic_object" ++ fi + fi + ;; + +@@ -1296,7 +1950,7 @@ + if test -n "$prev"; then + $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then +@@ -1305,6 +1959,7 @@ + finalize_command="$finalize_command $arg" + fi + ++ oldlibs= + # calculate the name of the file, without its directory + outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` + libobjs_save="$libobjs" +@@ -1325,12 +1980,12 @@ + output_objdir="$output_objdir/$objdir" + fi + # Create the object directory. +- if test ! -d $output_objdir; then ++ if test ! -d "$output_objdir"; then + $show "$mkdir $output_objdir" + $run $mkdir $output_objdir +- status=$? +- if test $status -ne 0 && test ! -d $output_objdir; then +- exit $status ++ exit_status=$? ++ if test "$exit_status" -ne 0 && test ! -d "$output_objdir"; then ++ exit $exit_status + fi + fi + +@@ -1339,7 +1994,7 @@ + "") + $echo "$modename: you must specify an output file" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + *.$libext) linkmode=oldlib ;; + *.lo | *.$objext) linkmode=obj ;; +@@ -1347,7 +2002,17 @@ + *) linkmode=prog ;; # Anything else should be a program. + esac + ++ case $host in ++ *cygwin* | *mingw* | *pw32*) ++ # don't eliminate duplications in $postdeps and $predeps ++ duplicate_compiler_generated_deps=yes ++ ;; ++ *) ++ duplicate_compiler_generated_deps=$duplicate_deps ++ ;; ++ esac + specialdeplibs= ++ + libs= + # Find all interdependent deplibs by searching for libraries + # that are linked more than once (e.g. -la -lb -la) +@@ -1359,12 +2024,30 @@ + fi + libs="$libs $deplib" + done ++ ++ if test "$linkmode" = lib; then ++ libs="$predeps $libs $compiler_lib_search_path $postdeps" ++ ++ # Compute libraries that are listed more than once in $predeps ++ # $postdeps and mark them as special (i.e., whose duplicates are ++ # not to be eliminated). ++ pre_post_deps= ++ if test "X$duplicate_compiler_generated_deps" = "Xyes" ; then ++ for pre_post_dep in $predeps $postdeps; do ++ case "$pre_post_deps " in ++ *" $pre_post_dep "*) specialdeplibs="$specialdeplibs $pre_post_deps" ;; ++ esac ++ pre_post_deps="$pre_post_deps $pre_post_dep" ++ done ++ fi ++ pre_post_deps= ++ fi ++ + deplibs= + newdependency_libs= + newlib_search_path= + need_relink=no # whether we're linking any uninstalled libtool libraries + notinst_deplibs= # not-installed libtool libraries +- notinst_path= # paths that contain not-installed libtool libraries + case $linkmode in + lib) + passes="conv link" +@@ -1373,7 +2056,7 @@ + *.la) ;; + *) + $echo "$modename: libraries can \`-dlopen' only libtool libraries: $file" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + esac + done +@@ -1390,39 +2073,58 @@ + ;; + esac + for pass in $passes; do +- if test $linkmode = prog; then +- # Determine which files to process ++ if test "$linkmode,$pass" = "lib,link" || ++ test "$linkmode,$pass" = "prog,scan"; then ++ libs="$deplibs" ++ deplibs= ++ fi ++ if test "$linkmode" = prog; then + case $pass in +- dlopen) +- libs="$dlfiles" +- save_deplibs="$deplibs" # Collect dlpreopened libraries +- deplibs= +- ;; ++ dlopen) libs="$dlfiles" ;; + dlpreopen) libs="$dlprefiles" ;; +- link) libs="$deplibs %DEPLIBS% $dependency_libs" ;; ++ link) ++ libs="$deplibs %DEPLIBS%" ++ test "X$link_all_deplibs" != Xno && libs="$libs $dependency_libs" ++ ;; + esac + fi ++ if test "$pass" = dlopen; then ++ # Collect dlpreopened libraries ++ save_deplibs="$deplibs" ++ deplibs= ++ fi + for deplib in $libs; do + lib= + found=no + case $deplib in +- -l*) +- if test $linkmode = oldlib && test $linkmode = obj; then +- $echo "$modename: warning: \`-l' is ignored for archives/objects: $deplib" 1>&2 +- continue ++ -mt|-mthreads|-kthread|-Kthread|-pthread|-pthreads|--thread-safe) ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ compiler_flags="$compiler_flags $deplib" + fi +- if test $pass = conv; then +- deplibs="$deplib $deplibs" ++ continue ++ ;; ++ -l*) ++ if test "$linkmode" != lib && test "$linkmode" != prog; then ++ $echo "$modename: warning: \`-l' is ignored for archives/objects" 1>&2 + continue + fi + name=`$echo "X$deplib" | $Xsed -e 's/^-l//'` + for searchdir in $newlib_search_path $lib_search_path $sys_lib_search_path $shlib_search_path; do +- # Search the libtool library +- lib="$searchdir/lib${name}.la" +- if test -f "$lib"; then +- found=yes +- break +- fi ++ for search_ext in .la $std_shrext .so .a; do ++ # Search the libtool library ++ lib="$searchdir/lib${name}${search_ext}" ++ if test -f "$lib"; then ++ if test "$search_ext" = ".la"; then ++ found=yes ++ else ++ found=no ++ fi ++ break 2 ++ fi ++ done + done + if test "$found" != yes; then + # deplib doesn't seem to be a libtool library +@@ -1431,40 +2133,76 @@ + finalize_deplibs="$deplib $finalize_deplibs" + else + deplibs="$deplib $deplibs" +- test $linkmode = lib && newdependency_libs="$deplib $newdependency_libs" ++ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" + fi + continue ++ else # deplib is a libtool library ++ # If $allow_libtool_libs_with_static_runtimes && $deplib is a stdlib, ++ # We need to do some special things here, and not later. ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ case " $predeps $postdeps " in ++ *" $deplib "*) ++ if (${SED} -e '2q' $lib | ++ grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then ++ library_names= ++ old_library= ++ case $lib in ++ */* | *\\*) . $lib ;; ++ *) . ./$lib ;; ++ esac ++ for l in $old_library $library_names; do ++ ll="$l" ++ done ++ if test "X$ll" = "X$old_library" ; then # only static version available ++ found=no ++ ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` ++ test "X$ladir" = "X$lib" && ladir="." ++ lib=$ladir/$old_library ++ if test "$linkmode,$pass" = "prog,link"; then ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ deplibs="$deplib $deplibs" ++ test "$linkmode" = lib && newdependency_libs="$deplib $newdependency_libs" ++ fi ++ continue ++ fi ++ fi ++ ;; ++ *) ;; ++ esac ++ fi + fi + ;; # -l + -L*) + case $linkmode in + lib) + deplibs="$deplib $deplibs" +- test $pass = conv && continue ++ test "$pass" = conv && continue + newdependency_libs="$deplib $newdependency_libs" + newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + ;; + prog) +- if test $pass = conv; then ++ if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi +- if test $pass = scan; then ++ if test "$pass" = scan; then + deplibs="$deplib $deplibs" +- newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + else + compile_deplibs="$deplib $compile_deplibs" + finalize_deplibs="$deplib $finalize_deplibs" + fi ++ newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'` + ;; + *) +- $echo "$modename: warning: \`-L' is ignored for archives/objects: $deplib" 1>&2 ++ $echo "$modename: warning: \`-L' is ignored for archives/objects" 1>&2 + ;; + esac # linkmode + continue + ;; # -L + -R*) +- if test $pass = link; then ++ if test "$pass" = link; then + dir=`$echo "X$deplib" | $Xsed -e 's/^-R//'` + # Make sure the xrpath contains only unique directories. + case "$xrpath " in +@@ -1477,30 +2215,45 @@ + ;; + *.la) lib="$deplib" ;; + *.$libext) +- if test $pass = conv; then ++ if test "$pass" = conv; then + deplibs="$deplib $deplibs" + continue + fi + case $linkmode in + lib) +- if test "$deplibs_check_method" != pass_all; then +- echo +- echo "*** Warning: Trying to link with static lib archive $deplib." +- echo "*** I have the capability to make that library automatically link in when" +- echo "*** you link to this library. But I can only do this if you have a" +- echo "*** shared version of the library, which you do not appear to have" +- echo "*** because the file extensions .$libext of this argument makes me believe" +- echo "*** that it is just a static archive that I should not used here." ++ valid_a_lib=no ++ case $deplibs_check_method in ++ match_pattern*) ++ set dummy $deplibs_check_method ++ match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` ++ if eval $echo \"$deplib\" 2>/dev/null \ ++ | $SED 10q \ ++ | $EGREP "$match_pattern_regex" > /dev/null; then ++ valid_a_lib=yes ++ fi ++ ;; ++ pass_all) ++ valid_a_lib=yes ++ ;; ++ esac ++ if test "$valid_a_lib" != yes; then ++ $echo ++ $echo "*** Warning: Trying to link with static lib archive $deplib." ++ $echo "*** I have the capability to make that library automatically link in when" ++ $echo "*** you link to this library. But I can only do this if you have a" ++ $echo "*** shared version of the library, which you do not appear to have" ++ $echo "*** because the file extensions .$libext of this argument makes me believe" ++ $echo "*** that it is just a static archive that I should not used here." + else +- echo +- echo "*** Warning: Linking the shared library $output against the" +- echo "*** static library $deplib is not portable!" ++ $echo ++ $echo "*** Warning: Linking the shared library $output against the" ++ $echo "*** static library $deplib is not portable!" + deplibs="$deplib $deplibs" + fi + continue + ;; + prog) +- if test $pass != link; then ++ if test "$pass" != link; then + deplibs="$deplib $deplibs" + else + compile_deplibs="$deplib $compile_deplibs" +@@ -1511,14 +2264,18 @@ + esac # linkmode + ;; # *.$libext + *.lo | *.$objext) +- if test $pass = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then +- # If there is no dlopen support or we're linking statically, +- # we need to preload. +- newdlprefiles="$newdlprefiles $deplib" +- compile_deplibs="$deplib $compile_deplibs" +- finalize_deplibs="$deplib $finalize_deplibs" +- else +- newdlfiles="$newdlfiles $deplib" ++ if test "$pass" = conv; then ++ deplibs="$deplib $deplibs" ++ elif test "$linkmode" = prog; then ++ if test "$pass" = dlpreopen || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then ++ # If there is no dlopen support or we're linking statically, ++ # we need to preload. ++ newdlprefiles="$newdlprefiles $deplib" ++ compile_deplibs="$deplib $compile_deplibs" ++ finalize_deplibs="$deplib $finalize_deplibs" ++ else ++ newdlfiles="$newdlfiles $deplib" ++ fi + fi + continue + ;; +@@ -1527,17 +2284,17 @@ + continue + ;; + esac # case $deplib +- if test $found = yes || test -f "$lib"; then : ++ if test "$found" = yes || test -f "$lib"; then : + else +- $echo "$modename: cannot find the library \`$lib'" 1>&2 +- exit 1 ++ $echo "$modename: cannot find the library \`$lib' or unhandled argument \`$deplib'" 1>&2 ++ exit $EXIT_FAILURE + fi + + # Check to see that this really is a libtool archive. +- if (${SED} -e '2q' $lib | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : ++ if (${SED} -e '2q' $lib | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + ladir=`$echo "X$lib" | $Xsed -e 's%/[^/]*$%%'` +@@ -1550,8 +2307,11 @@ + library_names= + old_library= + # If the library was installed with an old release of libtool, +- # it will not redefine variable installed. ++ # it will not redefine variables installed, or shouldnotlink + installed=yes ++ shouldnotlink=no ++ avoidtemprpath= ++ + + # Read the .la file + case $lib in +@@ -1561,19 +2321,18 @@ + + if test "$linkmode,$pass" = "lib,link" || + test "$linkmode,$pass" = "prog,scan" || +- { test $linkmode = oldlib && test $linkmode = obj; }; then +- # Add dl[pre]opened files of deplib ++ { test "$linkmode" != prog && test "$linkmode" != lib; }; then + test -n "$dlopen" && dlfiles="$dlfiles $dlopen" + test -n "$dlpreopen" && dlprefiles="$dlprefiles $dlpreopen" + fi + +- if test $pass = conv; then ++ if test "$pass" = conv; then + # Only check for convenience libraries + deplibs="$lib $deplibs" + if test -z "$libdir"; then + if test -z "$old_library"; then + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + # It is a libtool convenience library, so add in its objects. + convenience="$convenience $ladir/$objdir/$old_library" +@@ -1588,13 +2347,14 @@ + fi + tmp_libs="$tmp_libs $deplib" + done +- elif test $linkmode != prog && test $linkmode != lib; then ++ elif test "$linkmode" != prog && test "$linkmode" != lib; then + $echo "$modename: \`$lib' is not a convenience library" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + continue + fi # $pass = conv + ++ + # Get the name of the library we link against. + linklib= + for l in $old_library $library_names; do +@@ -1602,19 +2362,23 @@ + done + if test -z "$linklib"; then + $echo "$modename: cannot find name of link library for \`$lib'" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + # This library was specified with -dlopen. +- if test $pass = dlopen; then ++ if test "$pass" = dlopen; then + if test -z "$libdir"; then + $echo "$modename: cannot -dlopen a convenience library: \`$lib'" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi +- if test -z "$dlname" || test "$dlopen_support" != yes || test "$build_libtool_libs" = no; then ++ if test -z "$dlname" || ++ test "$dlopen_support" != yes || ++ test "$build_libtool_libs" = no; then + # If there is no dlname, no dlopen support or we're linking +- # statically, we need to preload. +- dlprefiles="$dlprefiles $lib" ++ # statically, we need to preload. We also need to preload any ++ # dependent libraries so libltdl's deplib preloader doesn't ++ # bomb out in the load deplibs phase. ++ dlprefiles="$dlprefiles $lib $dependency_libs" + else + newdlfiles="$newdlfiles $lib" + fi +@@ -1646,19 +2410,27 @@ + dir="$libdir" + absdir="$libdir" + fi ++ test "X$hardcode_automatic" = Xyes && avoidtemprpath=yes + else +- dir="$ladir/$objdir" +- absdir="$abs_ladir/$objdir" +- # Remove this search path later +- notinst_path="$notinst_path $abs_ladir" ++ if test ! -f "$ladir/$objdir/$linklib" && test -f "$abs_ladir/$linklib"; then ++ dir="$ladir" ++ absdir="$abs_ladir" ++ # Remove this search path later ++ notinst_path="$notinst_path $abs_ladir" ++ else ++ dir="$ladir/$objdir" ++ absdir="$abs_ladir/$objdir" ++ # Remove this search path later ++ notinst_path="$notinst_path $abs_ladir" ++ fi + fi # $installed = yes + name=`$echo "X$laname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` + + # This library was specified with -dlpreopen. +- if test $pass = dlpreopen; then ++ if test "$pass" = dlpreopen; then + if test -z "$libdir"; then + $echo "$modename: cannot -dlpreopen a convenience library: \`$lib'" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + # Prefer using a static library (so that no silly _DYNAMIC symbols + # are required to link). +@@ -1674,18 +2446,19 @@ + + if test -z "$libdir"; then + # Link the convenience library +- if test $linkmode = lib; then ++ if test "$linkmode" = lib; then + deplibs="$dir/$old_library $deplibs" + elif test "$linkmode,$pass" = "prog,link"; then + compile_deplibs="$dir/$old_library $compile_deplibs" + finalize_deplibs="$dir/$old_library $finalize_deplibs" + else +- deplibs="$lib $deplibs" ++ deplibs="$lib $deplibs" # used for prog,scan pass + fi + continue + fi + +- if test $linkmode = prog && test $pass != link; then ++ ++ if test "$linkmode" = prog && test "$pass" != link; then + newlib_search_path="$newlib_search_path $ladir" + deplibs="$lib $deplibs" + +@@ -1701,7 +2474,7 @@ + -L*) newlib_search_path="$newlib_search_path "`$echo "X$deplib" | $Xsed -e 's/^-L//'`;; ### testsuite: skip nested quoting test + esac + # Need to link against all dependency_libs? +- if test $linkalldeplibs = yes; then ++ if test "$linkalldeplibs" = yes; then + deplibs="$deplib $deplibs" + else + # Need to hardcode shared library paths +@@ -1718,13 +2491,19 @@ + continue + fi # $linkmode = prog... + +- link_static=no # Whether the deplib will be linked statically +- if test -n "$library_names" && +- { test "$prefer_static_libs" = no || test -z "$old_library"; }; then +- # Link against this shared library ++ if test "$linkmode,$pass" = "prog,link"; then ++ if test -n "$library_names" && ++ { test "$prefer_static_libs" = no || test -z "$old_library"; }; then ++ # We need to hardcode the library path ++ if test -n "$shlibpath_var" && test -z "$avoidtemprpath" ; then ++ # Make sure the rpath contains only unique directories. ++ case "$temp_rpath " in ++ *" $dir "*) ;; ++ *" $absdir "*) ;; ++ *) temp_rpath="$temp_rpath $absdir" ;; ++ esac ++ fi + +- if test "$linkmode,$pass" = "prog,link" || +- { test $linkmode = lib && test $hardcode_into_libs = yes; }; then + # Hardcode the library path. + # Skip directories that are in the system default run-time + # search path. +@@ -1746,17 +2525,6 @@ + esac + ;; + esac +- if test $linkmode = prog; then +- # We need to hardcode the library path +- if test -n "$shlibpath_var"; then +- # Make sure the rpath contains only unique directories. +- case "$temp_rpath " in +- *" $dir "*) ;; +- *" $absdir "*) ;; +- *) temp_rpath="$temp_rpath $dir" ;; +- esac +- fi +- fi + fi # $linkmode,$pass = prog,link... + + if test "$alldeplibs" = yes && +@@ -1766,11 +2534,56 @@ + # We only need to search for static libraries + continue + fi ++ fi + ++ link_static=no # Whether the deplib will be linked statically ++ use_static_libs=$prefer_static_libs ++ if test "$use_static_libs" = built && test "$installed" = yes ; then ++ use_static_libs=no ++ fi ++ if test -n "$library_names" && ++ { test "$use_static_libs" = no || test -z "$old_library"; }; then + if test "$installed" = no; then + notinst_deplibs="$notinst_deplibs $lib" + need_relink=yes + fi ++ # This is a shared library ++ ++ # Warn about portability, can't link against -module's on ++ # some systems (darwin) ++ if test "$shouldnotlink" = yes && test "$pass" = link ; then ++ $echo ++ if test "$linkmode" = prog; then ++ $echo "*** Warning: Linking the executable $output against the loadable module" ++ else ++ $echo "*** Warning: Linking the shared library $output against the loadable module" ++ fi ++ $echo "*** $linklib is not portable!" ++ fi ++ if test "$linkmode" = lib && ++ test "$hardcode_into_libs" = yes; then ++ # Hardcode the library path. ++ # Skip directories that are in the system default run-time ++ # search path. ++ case " $sys_lib_dlsearch_path " in ++ *" $absdir "*) ;; ++ *) ++ case "$compile_rpath " in ++ *" $absdir "*) ;; ++ *) compile_rpath="$compile_rpath $absdir" ++ esac ++ ;; ++ esac ++ case " $sys_lib_dlsearch_path " in ++ *" $libdir "*) ;; ++ *) ++ case "$finalize_rpath " in ++ *" $libdir "*) ;; ++ *) finalize_rpath="$finalize_rpath $libdir" ++ esac ++ ;; ++ esac ++ fi + + if test -n "$old_archive_from_expsyms_cmds"; then + # figure out the soname +@@ -1784,7 +2597,7 @@ + elif test -n "$soname_spec"; then + # bleh windows + case $host in +- *cygwin*) ++ *cygwin* | mingw*) + major=`expr $current - $age` + versuffix="-$major" + ;; +@@ -1796,17 +2609,18 @@ + + # Make a new name for the extract_expsyms_cmds to use + soroot="$soname" +- soname=`echo $soroot | ${SED} -e 's/^.*\///'` +- newlib="libimp-`echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" ++ soname=`$echo $soroot | ${SED} -e 's/^.*\///'` ++ newlib="libimp-`$echo $soname | ${SED} 's/^lib//;s/\.dll$//'`.a" + + # If the library has no export list, then create one now + if test -f "$output_objdir/$soname-def"; then : + else + $show "extracting exported symbol list from \`$soname'" + save_ifs="$IFS"; IFS='~' +- eval cmds=\"$extract_expsyms_cmds\" ++ cmds=$extract_expsyms_cmds + for cmd in $cmds; do + IFS="$save_ifs" ++ eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done +@@ -1817,9 +2631,10 @@ + if test -f "$output_objdir/$newlib"; then :; else + $show "generating import library for \`$soname'" + save_ifs="$IFS"; IFS='~' +- eval cmds=\"$old_archive_from_expsyms_cmds\" ++ cmds=$old_archive_from_expsyms_cmds + for cmd in $cmds; do + IFS="$save_ifs" ++ eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done +@@ -1828,9 +2643,9 @@ + # make sure the library variables are pointing to the new library + dir=$output_objdir + linklib=$newlib +- fi # test -n $old_archive_from_expsyms_cmds ++ fi # test -n "$old_archive_from_expsyms_cmds" + +- if test $linkmode = prog || test "$mode" != relink; then ++ if test "$linkmode" = prog || test "$mode" != relink; then + add_shlibpath= + add_dir= + add= +@@ -1839,6 +2654,26 @@ + immediate | unsupported) + if test "$hardcode_direct" = no; then + add="$dir/$linklib" ++ case $host in ++ *-*-sco3.2v5.0.[024]*) add_dir="-L$dir" ;; ++ *-*-sysv4*uw2*) add_dir="-L$dir" ;; ++ *-*-sysv5OpenUNIX* | *-*-sysv5UnixWare7.[01].[10]* | \ ++ *-*-unixware7*) add_dir="-L$dir" ;; ++ *-*-darwin* ) ++ # if the lib is a module then we can not link against ++ # it, someone is ignoring the new warnings I added ++ if /usr/bin/file -L $add 2> /dev/null | ++ $EGREP ": [^:]* bundle" >/dev/null ; then ++ $echo "** Warning, lib $linklib is a module, not a shared library" ++ if test -z "$old_library" ; then ++ $echo ++ $echo "** And there doesn't seem to be a static archive available" ++ $echo "** The link will probably fail, sorry" ++ else ++ add="$dir/$old_library" ++ fi ++ fi ++ esac + elif test "$hardcode_minus_L" = no; then + case $host in + *-*-sunos*) add_shlibpath="$dir" ;; +@@ -1859,10 +2694,10 @@ + add_dir="-L$dir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then +- case "$libdir" in +- [\/]*) +- add_dir="-L$inst_prefix_dir$libdir $add_dir" +- ;; ++ case $libdir in ++ [\\/]*) ++ add_dir="$add_dir -L$inst_prefix_dir$libdir" ++ ;; + esac + fi + add="-l$name" +@@ -1878,7 +2713,7 @@ + + if test "$lib_linked" != yes; then + $echo "$modename: configuration error: unsupported hardcode properties" +- exit 1 ++ exit $EXIT_FAILURE + fi + + if test -n "$add_shlibpath"; then +@@ -1887,7 +2722,7 @@ + *) compile_shlibpath="$compile_shlibpath$add_shlibpath:" ;; + esac + fi +- if test $linkmode = prog; then ++ if test "$linkmode" = prog; then + test -n "$add_dir" && compile_deplibs="$add_dir $compile_deplibs" + test -n "$add" && compile_deplibs="$add $compile_deplibs" + else +@@ -1904,7 +2739,7 @@ + fi + fi + +- if test $linkmode = prog || test "$mode" = relink; then ++ if test "$linkmode" = prog || test "$mode" = relink; then + add_shlibpath= + add_dir= + add= +@@ -1920,21 +2755,28 @@ + *) finalize_shlibpath="$finalize_shlibpath$libdir:" ;; + esac + add="-l$name" ++ elif test "$hardcode_automatic" = yes; then ++ if test -n "$inst_prefix_dir" && ++ test -f "$inst_prefix_dir$libdir/$linklib" ; then ++ add="$inst_prefix_dir$libdir/$linklib" ++ else ++ add="$libdir/$linklib" ++ fi + else + # We cannot seem to hardcode it, guess we'll fake it. + add_dir="-L$libdir" + # Try looking first in the location we're being installed to. + if test -n "$inst_prefix_dir"; then +- case "$libdir" in +- [\/]*) +- add_dir="-L$inst_prefix_dir$libdir $add_dir" +- ;; ++ case $libdir in ++ [\\/]*) ++ add_dir="$add_dir -L$inst_prefix_dir$libdir" ++ ;; + esac + fi + add="-l$name" + fi + +- if test $linkmode = prog; then ++ if test "$linkmode" = prog; then + test -n "$add_dir" && finalize_deplibs="$add_dir $finalize_deplibs" + test -n "$add" && finalize_deplibs="$add $finalize_deplibs" + else +@@ -1942,16 +2784,7 @@ + test -n "$add" && deplibs="$add $deplibs" + fi + fi +- elif test $linkmode = prog; then +- if test "$alldeplibs" = yes && +- { test "$deplibs_check_method" = pass_all || +- { test "$build_libtool_libs" = yes && +- test -n "$library_names"; }; }; then +- # We only need to search for static libraries +- continue +- fi +- +- # Try to link the static library ++ elif test "$linkmode" = prog; then + # Here we assume that one of hardcode_direct or hardcode_minus_L + # is not unsupported. This is valid on all known static and + # shared platforms. +@@ -1971,21 +2804,21 @@ + + # Just print a warning and add the library to dependency_libs so + # that the program can be linked against the static library. +- echo +- echo "*** Warning: This system can not link to static lib archive $lib." +- echo "*** I have the capability to make that library automatically link in when" +- echo "*** you link to this library. But I can only do this if you have a" +- echo "*** shared version of the library, which you do not appear to have." ++ $echo ++ $echo "*** Warning: This system can not link to static lib archive $lib." ++ $echo "*** I have the capability to make that library automatically link in when" ++ $echo "*** you link to this library. But I can only do this if you have a" ++ $echo "*** shared version of the library, which you do not appear to have." + if test "$module" = yes; then +- echo "*** But as you try to build a module library, libtool will still create " +- echo "*** a static module, that should work as long as the dlopening application" +- echo "*** is linked with the -dlopen flag to resolve symbols at runtime." ++ $echo "*** But as you try to build a module library, libtool will still create " ++ $echo "*** a static module, that should work as long as the dlopening application" ++ $echo "*** is linked with the -dlopen flag to resolve symbols at runtime." + if test -z "$global_symbol_pipe"; then +- echo +- echo "*** However, this would only work if libtool was able to extract symbol" +- echo "*** lists from a program, using \`nm' or equivalent, but libtool could" +- echo "*** not find such a program. So, this module is probably useless." +- echo "*** \`nm' from GNU binutils and a full rebuild may help." ++ $echo ++ $echo "*** However, this would only work if libtool was able to extract symbol" ++ $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" ++ $echo "*** not find such a program. So, this module is probably useless." ++ $echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + build_libtool_libs=module +@@ -1995,17 +2828,16 @@ + fi + fi + else +- convenience="$convenience $dir/$old_library" +- old_convenience="$old_convenience $dir/$old_library" + deplibs="$dir/$old_library $deplibs" + link_static=yes + fi + fi # link shared/static library? + +- if test $linkmode = lib; then ++ if test "$linkmode" = lib; then + if test -n "$dependency_libs" && +- { test $hardcode_into_libs != yes || test $build_old_libs = yes || +- test $link_static = yes; }; then ++ { test "$hardcode_into_libs" != yes || ++ test "$build_old_libs" = yes || ++ test "$link_static" = yes; }; then + # Extract -R from dependency_libs + temp_deplibs= + for libdir in $dependency_libs; do +@@ -2036,7 +2868,7 @@ + tmp_libs="$tmp_libs $deplib" + done + +- if test $link_all_deplibs != no; then ++ if test "$link_all_deplibs" != no; then + # Add the search paths of all dependency libraries + for deplib in $dependency_libs; do + case $deplib in +@@ -2056,38 +2888,83 @@ + ;; + esac + if grep "^installed=no" $deplib > /dev/null; then +- path="-L$absdir/$objdir" ++ path="$absdir/$objdir" + else + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + if test "$absdir" != "$libdir"; then + $echo "$modename: warning: \`$deplib' seems to be moved" 1>&2 + fi +- path="-L$absdir" ++ path="$absdir" + fi ++ depdepl= ++ case $host in ++ *-*-darwin*) ++ # we do not want to link against static libs, ++ # but need to link against shared ++ eval deplibrary_names=`${SED} -n -e 's/^library_names=\(.*\)$/\1/p' $deplib` ++ if test -n "$deplibrary_names" ; then ++ for tmp in $deplibrary_names ; do ++ depdepl=$tmp ++ done ++ if test -f "$path/$depdepl" ; then ++ depdepl="$path/$depdepl" ++ fi ++ # do not add paths which are already there ++ case " $newlib_search_path " in ++ *" $path "*) ;; ++ *) newlib_search_path="$newlib_search_path $path";; ++ esac ++ fi ++ path="" ++ ;; ++ *) ++ path="-L$path" ++ ;; ++ esac ++ ;; ++ -l*) ++ case $host in ++ *-*-darwin*) ++ # Again, we only want to link against shared libraries ++ eval tmp_libs=`$echo "X$deplib" | $Xsed -e "s,^\-l,,"` ++ for tmp in $newlib_search_path ; do ++ if test -f "$tmp/lib$tmp_libs.dylib" ; then ++ eval depdepl="$tmp/lib$tmp_libs.dylib" ++ break ++ fi ++ done ++ path="" ++ ;; ++ *) continue ;; ++ esac + ;; + *) continue ;; + esac + case " $deplibs " in + *" $path "*) ;; +- *) deplibs="$deplibs $path" ;; ++ *) deplibs="$path $deplibs" ;; ++ esac ++ case " $deplibs " in ++ *" $depdepl "*) ;; ++ *) deplibs="$depdepl $deplibs" ;; + esac + done + fi # link_all_deplibs != no + fi # linkmode = lib + done # for deplib in $libs +- if test $pass = dlpreopen; then ++ dependency_libs="$newdependency_libs" ++ if test "$pass" = dlpreopen; then + # Link the dlpreopened libraries before other libraries + for deplib in $save_deplibs; do + deplibs="$deplib $deplibs" + done + fi +- if test $pass != dlopen; then +- test $pass != scan && dependency_libs="$newdependency_libs" +- if test $pass != conv; then ++ if test "$pass" != dlopen; then ++ if test "$pass" != conv; then + # Make sure lib_search_path contains only unique directories. + lib_search_path= + for dir in $newlib_search_path; do +@@ -2109,9 +2986,30 @@ + eval tmp_libs=\"\$$var\" + new_libs= + for deplib in $tmp_libs; do ++ # FIXME: Pedantically, this is the right thing to do, so ++ # that some nasty dependency loop isn't accidentally ++ # broken: ++ #new_libs="$deplib $new_libs" ++ # Pragmatically, this seems to cause very few problems in ++ # practice: + case $deplib in + -L*) new_libs="$deplib $new_libs" ;; ++ -R*) ;; + *) ++ # And here is the reason: when a library appears more ++ # than once as an explicit dependence of a library, or ++ # is implicitly linked in more than once by the ++ # compiler, it is considered special, and multiple ++ # occurrences thereof are not removed. Compare this ++ # with having the same library being listed as a ++ # dependency of multiple other libraries: in this case, ++ # we know (pedantically, we assume) the library does not ++ # need to be listed more than once, so we keep only the ++ # last copy. This is not always right, but it is rare ++ # enough that we require users that really mean to play ++ # such unportable linking tricks to link the library ++ # using -Wl,-lname, so that libtool does not consider it ++ # for duplicate removal. + case " $specialdeplibs " in + *" $deplib "*) new_libs="$deplib $new_libs" ;; + *) +@@ -2139,19 +3037,32 @@ + eval $var=\"$tmp_libs\" + done # for var + fi +- if test "$pass" = "conv" && +- { test "$linkmode" = "lib" || test "$linkmode" = "prog"; }; then +- libs="$deplibs" # reset libs +- deplibs= +- fi ++ # Last step: remove runtime libs from dependency_libs ++ # (they stay in deplibs) ++ tmp_libs= ++ for i in $dependency_libs ; do ++ case " $predeps $postdeps $compiler_lib_search_path " in ++ *" $i "*) ++ i="" ++ ;; ++ esac ++ if test -n "$i" ; then ++ tmp_libs="$tmp_libs $i" ++ fi ++ done ++ dependency_libs=$tmp_libs + done # for pass +- if test $linkmode = prog; then ++ if test "$linkmode" = prog; then + dlfiles="$newdlfiles" + dlprefiles="$newdlprefiles" + fi + + case $linkmode in + oldlib) ++ if test -n "$deplibs"; then ++ $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 ++ fi ++ + if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then + $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 + fi +@@ -2165,7 +3076,7 @@ + fi + + if test -n "$vinfo"; then +- $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2 ++ $echo "$modename: warning: \`-version-info/-version-number' is ignored for archives" 1>&2 + fi + + if test -n "$release"; then +@@ -2187,17 +3098,19 @@ + case $outputname in + lib*) + name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` ++ eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + ;; + *) + if test "$module" = no; then + $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + if test "$need_lib_prefix" != no; then + # Add the "lib" prefix for modules if required + name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` ++ eval shared_ext=\"$shrext_cmds\" + eval libname=\"$libname_spec\" + else + libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` +@@ -2208,11 +3121,11 @@ + if test -n "$objs"; then + if test "$deplibs_check_method" != pass_all; then + $echo "$modename: cannot build libtool library \`$output' from non-libtool objects on this host:$objs" 2>&1 +- exit 1 ++ exit $EXIT_FAILURE + else +- echo +- echo "*** Warning: Linking the shared library $output against the non-libtool" +- echo "*** objects $objs is not portable!" ++ $echo ++ $echo "*** Warning: Linking the shared library $output against the non-libtool" ++ $echo "*** objects $objs is not portable!" + libobjs="$libobjs $objs" + fi + fi +@@ -2222,7 +3135,7 @@ + fi + + set dummy $rpath +- if test $# -gt 2; then ++ if test "$#" -gt 2; then + $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 + fi + install_libdir="$2" +@@ -2231,14 +3144,16 @@ + if test -z "$rpath"; then + if test "$build_libtool_libs" = yes; then + # Building a libtool convenience library. +- libext=al ++ # Some compilers have problems with a `.al' extension so ++ # convenience libraries should have the same extension an ++ # archive normally would. + oldlibs="$output_objdir/$libname.$libext $oldlibs" + build_libtool_libs=convenience + build_old_libs=yes + fi + + if test -n "$vinfo"; then +- $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2 ++ $echo "$modename: warning: \`-version-info/-version-number' is ignored for convenience libraries" 1>&2 + fi + + if test -n "$release"; then +@@ -2254,45 +3169,87 @@ + if test -n "$8"; then + $echo "$modename: too many parameters to \`-version-info'" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + +- current="$2" +- revision="$3" +- age="$4" ++ # convert absolute version numbers to libtool ages ++ # this retains compatibility with .la files and attempts ++ # to make the code below a bit more comprehensible ++ ++ case $vinfo_number in ++ yes) ++ number_major="$2" ++ number_minor="$3" ++ number_revision="$4" ++ # ++ # There are really only two kinds -- those that ++ # use the current revision as the major version ++ # and those that subtract age and use age as ++ # a minor version. But, then there is irix ++ # which has an extra 1 added just for fun ++ # ++ case $version_type in ++ darwin|linux|osf|windows) ++ current=`expr $number_major + $number_minor` ++ age="$number_minor" ++ revision="$number_revision" ++ ;; ++ freebsd-aout|freebsd-elf|sunos) ++ current="$number_major" ++ revision="$number_minor" ++ age="0" ++ ;; ++ irix|nonstopux) ++ current=`expr $number_major + $number_minor - 1` ++ age="$number_minor" ++ revision="$number_minor" ++ ;; ++ *) ++ $echo "$modename: unknown library version type \`$version_type'" 1>&2 ++ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 ++ exit $EXIT_FAILURE ++ ;; ++ esac ++ ;; ++ no) ++ current="$2" ++ revision="$3" ++ age="$4" ++ ;; ++ esac + + # Check that each of the things are valid numbers. + case $current in +- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) +- $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 ++ $echo "$modename: CURRENT \`$current' must be a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + esac + + case $revision in +- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) +- $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 ++ $echo "$modename: REVISION \`$revision' must be a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + esac + + case $age in +- 0 | [1-9] | [1-9][0-9] | [1-9][0-9][0-9]) ;; ++ 0|[1-9]|[1-9][0-9]|[1-9][0-9][0-9]|[1-9][0-9][0-9][0-9]|[1-9][0-9][0-9][0-9][0-9]) ;; + *) +- $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 ++ $echo "$modename: AGE \`$age' must be a nonnegative integer" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + esac + +- if test $age -gt $current; then ++ if test "$age" -gt "$current"; then + $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 + $echo "$modename: \`$vinfo' is not valid version information" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + # Calculate the version variables. +@@ -2309,7 +3266,7 @@ + versuffix="$major.$age.$revision" + # Darwin ld doesn't like 0 for these options... + minor_current=`expr $current + 1` +- verstring="-compatibility_version $minor_current -current_version $minor_current.$revision" ++ verstring="${wl}-compatibility_version ${wl}$minor_current ${wl}-current_version ${wl}$minor_current.$revision" + ;; + + freebsd-aout) +@@ -2333,7 +3290,7 @@ + + # Add in all the interfaces that we are compatible with. + loop=$revision +- while test $loop != 0; do ++ while test "$loop" -ne 0; do + iface=`expr $revision - $loop` + loop=`expr $loop - 1` + verstring="$verstring_prefix$major.$iface:$verstring" +@@ -2356,7 +3313,7 @@ + + # Add in all the interfaces that we are compatible with. + loop=$age +- while test $loop != 0; do ++ while test "$loop" -ne 0; do + iface=`expr $current - $loop` + loop=`expr $loop - 1` + verstring="$verstring:${iface}.0" +@@ -2380,20 +3337,19 @@ + + *) + $echo "$modename: unknown library version type \`$version_type'" 1>&2 +- echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 +- exit 1 ++ $echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 ++ exit $EXIT_FAILURE + ;; + esac + + # Clear the version info if we defaulted, and they specified a release. + if test -z "$vinfo" && test -n "$release"; then + major= +- verstring="0.0" + case $version_type in + darwin) + # we can't check for "0.0" in archive_cmds due to quoting + # problems, so we reset it completely +- verstring="" ++ verstring= + ;; + *) + verstring="0.0" +@@ -2427,9 +3383,30 @@ + fi + + if test "$mode" != relink; then +- # Remove our outputs. +- $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*" +- $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.* ++ # Remove our outputs, but don't remove object files since they ++ # may have been created when compiling PIC objects. ++ removelist= ++ tempremovelist=`$echo "$output_objdir/*"` ++ for p in $tempremovelist; do ++ case $p in ++ *.$objext) ++ ;; ++ $output_objdir/$outputname | $output_objdir/$libname.* | $output_objdir/${libname}${release}.*) ++ if test "X$precious_files_regex" != "X"; then ++ if echo $p | $EGREP -e "$precious_files_regex" >/dev/null 2>&1 ++ then ++ continue ++ fi ++ fi ++ removelist="$removelist $p" ++ ;; ++ *) ;; ++ esac ++ done ++ if test -n "$removelist"; then ++ $show "${rm}r $removelist" ++ $run ${rm}r $removelist ++ fi + fi + + # Now set the variables for building old libraries. +@@ -2442,9 +3419,9 @@ + + # Eliminate all temporary directories. + for path in $notinst_path; do +- lib_search_path=`echo "$lib_search_path " | ${SED} -e 's% $path % %g'` +- deplibs=`echo "$deplibs " | ${SED} -e 's% -L$path % %g'` +- dependency_libs=`echo "$dependency_libs " | ${SED} -e 's% -L$path % %g'` ++ lib_search_path=`$echo "$lib_search_path " | ${SED} -e "s% $path % %g"` ++ deplibs=`$echo "$deplibs " | ${SED} -e "s% -L$path % %g"` ++ dependency_libs=`$echo "$dependency_libs " | ${SED} -e "s% -L$path % %g"` + done + + if test -n "$xrpath"; then +@@ -2457,7 +3434,7 @@ + *) finalize_rpath="$finalize_rpath $libdir" ;; + esac + done +- if test $hardcode_into_libs != yes || test $build_old_libs = yes; then ++ if test "$hardcode_into_libs" != yes || test "$build_old_libs" = yes; then + dependency_libs="$temp_xrpath $dependency_libs" + fi + fi +@@ -2495,12 +3472,18 @@ + *-*-netbsd*) + # Don't link with libc until the a.out ld.so is fixed. + ;; +- *-*-openbsd* | *-*-freebsd*) ++ *-*-openbsd* | *-*-freebsd* | *-*-dragonfly*) + # Do not include libc due to us having libc/libc_r. + ;; +- *) ++ *-*-sco3.2v5* | *-*-sco5v6*) ++ # Causes problems with __ctype ++ ;; ++ *-*-sysv4.2uw2* | *-*-sysv5* | *-*-unixware* | *-*-OpenUNIX*) ++ # Compiler inserts libc in the correct place for threads to work ++ ;; ++ *) + # Add libc to deplibs on all other systems if necessary. +- if test $build_libtool_need_lc = "yes"; then ++ if test "$build_libtool_need_lc" = "yes"; then + deplibs="$deplibs -lc" + fi + ;; +@@ -2527,7 +3510,7 @@ + # This might be a little naive. We might want to check + # whether the library exists or not. But this is on + # osf3 & osf4 and I'm not really sure... Just +- # implementing what was already the behaviour. ++ # implementing what was already the behavior. + newdeplibs=$deplibs + ;; + test_compile) +@@ -2540,68 +3523,88 @@ + int main() { return 0; } + EOF + $rm conftest +- $CC -o conftest conftest.c $deplibs +- if test $? -eq 0 ; then ++ $LTCC $LTCFLAGS -o conftest conftest.c $deplibs ++ if test "$?" -eq 0 ; then + ldd_output=`ldd conftest` + for i in $deplibs; do +- name="`expr $i : '-l\(.*\)'`" ++ name=`expr $i : '-l\(.*\)'` + # If $name is empty we are operating on a -L argument. +- if test -n "$name" && test "$name" != "0"; then +- libname=`eval \\$echo \"$libname_spec\"` +- deplib_matches=`eval \\$echo \"$library_names_spec\"` +- set dummy $deplib_matches +- deplib_match=$2 +- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then +- newdeplibs="$newdeplibs $i" +- else +- droppeddeps=yes +- echo +- echo "*** Warning: dynamic linker does not accept needed library $i." +- echo "*** I have the capability to make that library automatically link in when" +- echo "*** you link to this library. But I can only do this if you have a" +- echo "*** shared version of the library, which I believe you do not have" +- echo "*** because a test_compile did reveal that the linker did not use it for" +- echo "*** its dynamic dependency list that programs get resolved with at runtime." ++ if test "$name" != "" && test "$name" -ne "0"; then ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ case " $predeps $postdeps " in ++ *" $i "*) ++ newdeplibs="$newdeplibs $i" ++ i="" ++ ;; ++ esac ++ fi ++ if test -n "$i" ; then ++ libname=`eval \\$echo \"$libname_spec\"` ++ deplib_matches=`eval \\$echo \"$library_names_spec\"` ++ set dummy $deplib_matches ++ deplib_match=$2 ++ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then ++ newdeplibs="$newdeplibs $i" ++ else ++ droppeddeps=yes ++ $echo ++ $echo "*** Warning: dynamic linker does not accept needed library $i." ++ $echo "*** I have the capability to make that library automatically link in when" ++ $echo "*** you link to this library. But I can only do this if you have a" ++ $echo "*** shared version of the library, which I believe you do not have" ++ $echo "*** because a test_compile did reveal that the linker did not use it for" ++ $echo "*** its dynamic dependency list that programs get resolved with at runtime." ++ fi + fi + else + newdeplibs="$newdeplibs $i" + fi + done + else +- # Error occured in the first compile. Let's try to salvage ++ # Error occurred in the first compile. Let's try to salvage + # the situation: Compile a separate program for each library. + for i in $deplibs; do +- name="`expr $i : '-l\(.*\)'`" +- # If $name is empty we are operating on a -L argument. +- if test -n "$name" && test "$name" != "0"; then ++ name=`expr $i : '-l\(.*\)'` ++ # If $name is empty we are operating on a -L argument. ++ if test "$name" != "" && test "$name" != "0"; then + $rm conftest +- $CC -o conftest conftest.c $i ++ $LTCC $LTCFLAGS -o conftest conftest.c $i + # Did it work? +- if test $? -eq 0 ; then ++ if test "$?" -eq 0 ; then + ldd_output=`ldd conftest` +- libname=`eval \\$echo \"$libname_spec\"` +- deplib_matches=`eval \\$echo \"$library_names_spec\"` +- set dummy $deplib_matches +- deplib_match=$2 +- if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then +- newdeplibs="$newdeplibs $i" +- else +- droppeddeps=yes +- echo +- echo "*** Warning: dynamic linker does not accept needed library $i." +- echo "*** I have the capability to make that library automatically link in when" +- echo "*** you link to this library. But I can only do this if you have a" +- echo "*** shared version of the library, which you do not appear to have" +- echo "*** because a test_compile did reveal that the linker did not use this one" +- echo "*** as a dynamic dependency that programs can get resolved with at runtime." ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ case " $predeps $postdeps " in ++ *" $i "*) ++ newdeplibs="$newdeplibs $i" ++ i="" ++ ;; ++ esac ++ fi ++ if test -n "$i" ; then ++ libname=`eval \\$echo \"$libname_spec\"` ++ deplib_matches=`eval \\$echo \"$library_names_spec\"` ++ set dummy $deplib_matches ++ deplib_match=$2 ++ if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then ++ newdeplibs="$newdeplibs $i" ++ else ++ droppeddeps=yes ++ $echo ++ $echo "*** Warning: dynamic linker does not accept needed library $i." ++ $echo "*** I have the capability to make that library automatically link in when" ++ $echo "*** you link to this library. But I can only do this if you have a" ++ $echo "*** shared version of the library, which you do not appear to have" ++ $echo "*** because a test_compile did reveal that the linker did not use this one" ++ $echo "*** as a dynamic dependency that programs can get resolved with at runtime." ++ fi + fi + else + droppeddeps=yes +- echo +- echo "*** Warning! Library $i is needed by this library but I was not able to" +- echo "*** make it link in! You will probably need to install it or some" +- echo "*** library that it depends on before this library will be fully" +- echo "*** functional. Installing it before continuing would be even better." ++ $echo ++ $echo "*** Warning! Library $i is needed by this library but I was not able to" ++ $echo "*** make it link in! You will probably need to install it or some" ++ $echo "*** library that it depends on before this library will be fully" ++ $echo "*** functional. Installing it before continuing would be even better." + fi + else + newdeplibs="$newdeplibs $i" +@@ -2613,13 +3616,22 @@ + set dummy $deplibs_check_method + file_magic_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + for a_deplib in $deplibs; do +- name="`expr $a_deplib : '-l\(.*\)'`" ++ name=`expr $a_deplib : '-l\(.*\)'` + # If $name is empty we are operating on a -L argument. +- if test -n "$name" && test "$name" != "0"; then +- libname=`eval \\$echo \"$libname_spec\"` +- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do +- potential_libs=`ls $i/$libname[.-]* 2>/dev/null` +- for potent_lib in $potential_libs; do ++ if test "$name" != "" && test "$name" != "0"; then ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ case " $predeps $postdeps " in ++ *" $a_deplib "*) ++ newdeplibs="$newdeplibs $a_deplib" ++ a_deplib="" ++ ;; ++ esac ++ fi ++ if test -n "$a_deplib" ; then ++ libname=`eval \\$echo \"$libname_spec\"` ++ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do ++ potential_libs=`ls $i/$libname[.-]* 2>/dev/null` ++ for potent_lib in $potential_libs; do + # Follow soft links. + if ls -lLd "$potent_lib" 2>/dev/null \ + | grep " -> " >/dev/null; then +@@ -2640,26 +3652,27 @@ + done + if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ + | ${SED} 10q \ +- | egrep "$file_magic_regex" > /dev/null; then ++ | $EGREP "$file_magic_regex" > /dev/null; then + newdeplibs="$newdeplibs $a_deplib" + a_deplib="" + break 2 + fi +- done +- done ++ done ++ done ++ fi + if test -n "$a_deplib" ; then + droppeddeps=yes +- echo +- echo "*** Warning: linker path does not have real file for library $a_deplib." +- echo "*** I have the capability to make that library automatically link in when" +- echo "*** you link to this library. But I can only do this if you have a" +- echo "*** shared version of the library, which you do not appear to have" +- echo "*** because I did check the linker path looking for a file starting" ++ $echo ++ $echo "*** Warning: linker path does not have real file for library $a_deplib." ++ $echo "*** I have the capability to make that library automatically link in when" ++ $echo "*** you link to this library. But I can only do this if you have a" ++ $echo "*** shared version of the library, which you do not appear to have" ++ $echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then +- echo "*** with $libname but no candidates were found. (...for file magic test)" ++ $echo "*** with $libname but no candidates were found. (...for file magic test)" + else +- echo "*** with $libname and none of the candidates passed a file format test" +- echo "*** using a file magic. Last file checked: $potlib" ++ $echo "*** with $libname and none of the candidates passed a file format test" ++ $echo "*** using a file magic. Last file checked: $potlib" + fi + fi + else +@@ -2672,36 +3685,46 @@ + set dummy $deplibs_check_method + match_pattern_regex=`expr "$deplibs_check_method" : "$2 \(.*\)"` + for a_deplib in $deplibs; do +- name="`expr $a_deplib : '-l\(.*\)'`" ++ name=`expr $a_deplib : '-l\(.*\)'` + # If $name is empty we are operating on a -L argument. + if test -n "$name" && test "$name" != "0"; then +- libname=`eval \\$echo \"$libname_spec\"` +- for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do +- potential_libs=`ls $i/$libname[.-]* 2>/dev/null` +- for potent_lib in $potential_libs; do +- potlib="$potent_lib" # see symlink-check below in file_magic test +- if eval echo \"$potent_lib\" 2>/dev/null \ +- | ${SED} 10q \ +- | egrep "$match_pattern_regex" > /dev/null; then +- newdeplibs="$newdeplibs $a_deplib" +- a_deplib="" +- break 2 +- fi ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ case " $predeps $postdeps " in ++ *" $a_deplib "*) ++ newdeplibs="$newdeplibs $a_deplib" ++ a_deplib="" ++ ;; ++ esac ++ fi ++ if test -n "$a_deplib" ; then ++ libname=`eval \\$echo \"$libname_spec\"` ++ for i in $lib_search_path $sys_lib_search_path $shlib_search_path; do ++ potential_libs=`ls $i/$libname[.-]* 2>/dev/null` ++ for potent_lib in $potential_libs; do ++ potlib="$potent_lib" # see symlink-check above in file_magic test ++ if eval $echo \"$potent_lib\" 2>/dev/null \ ++ | ${SED} 10q \ ++ | $EGREP "$match_pattern_regex" > /dev/null; then ++ newdeplibs="$newdeplibs $a_deplib" ++ a_deplib="" ++ break 2 ++ fi ++ done + done +- done ++ fi + if test -n "$a_deplib" ; then + droppeddeps=yes +- echo +- echo "*** Warning: linker path does not have real file for library $a_deplib." +- echo "*** I have the capability to make that library automatically link in when" +- echo "*** you link to this library. But I can only do this if you have a" +- echo "*** shared version of the library, which you do not appear to have" +- echo "*** because I did check the linker path looking for a file starting" ++ $echo ++ $echo "*** Warning: linker path does not have real file for library $a_deplib." ++ $echo "*** I have the capability to make that library automatically link in when" ++ $echo "*** you link to this library. But I can only do this if you have a" ++ $echo "*** shared version of the library, which you do not appear to have" ++ $echo "*** because I did check the linker path looking for a file starting" + if test -z "$potlib" ; then +- echo "*** with $libname but no candidates were found. (...for regex pattern test)" ++ $echo "*** with $libname but no candidates were found. (...for regex pattern test)" + else +- echo "*** with $libname and none of the candidates passed a file format test" +- echo "*** using a regex pattern. Last file checked: $potlib" ++ $echo "*** with $libname and none of the candidates passed a file format test" ++ $echo "*** using a regex pattern. Last file checked: $potlib" + fi + fi + else +@@ -2712,16 +3735,23 @@ + ;; + none | unknown | *) + newdeplibs="" +- if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ +- -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' | +- grep . >/dev/null; then +- echo ++ tmp_deplibs=`$echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ ++ -e 's/ -[LR][^ ]*//g'` ++ if test "X$allow_libtool_libs_with_static_runtimes" = "Xyes" ; then ++ for i in $predeps $postdeps ; do ++ # can't use Xsed below, because $i might contain '/' ++ tmp_deplibs=`$echo "X $tmp_deplibs" | ${SED} -e "1s,^X,," -e "s,$i,,"` ++ done ++ fi ++ if $echo "X $tmp_deplibs" | $Xsed -e 's/[ ]//g' \ ++ | grep . >/dev/null; then ++ $echo + if test "X$deplibs_check_method" = "Xnone"; then +- echo "*** Warning: inter-library dependencies are not supported in this platform." ++ $echo "*** Warning: inter-library dependencies are not supported in this platform." + else +- echo "*** Warning: inter-library dependencies are not known to be supported." ++ $echo "*** Warning: inter-library dependencies are not known to be supported." + fi +- echo "*** All declared inter-library dependencies are being dropped." ++ $echo "*** All declared inter-library dependencies are being dropped." + droppeddeps=yes + fi + ;; +@@ -2741,17 +3771,17 @@ + + if test "$droppeddeps" = yes; then + if test "$module" = yes; then +- echo +- echo "*** Warning: libtool could not satisfy all declared inter-library" +- echo "*** dependencies of module $libname. Therefore, libtool will create" +- echo "*** a static module, that should work as long as the dlopening" +- echo "*** application is linked with the -dlopen flag." ++ $echo ++ $echo "*** Warning: libtool could not satisfy all declared inter-library" ++ $echo "*** dependencies of module $libname. Therefore, libtool will create" ++ $echo "*** a static module, that should work as long as the dlopening" ++ $echo "*** application is linked with the -dlopen flag." + if test -z "$global_symbol_pipe"; then +- echo +- echo "*** However, this would only work if libtool was able to extract symbol" +- echo "*** lists from a program, using \`nm' or equivalent, but libtool could" +- echo "*** not find such a program. So, this module is probably useless." +- echo "*** \`nm' from GNU binutils and a full rebuild may help." ++ $echo ++ $echo "*** However, this would only work if libtool was able to extract symbol" ++ $echo "*** lists from a program, using \`nm' or equivalent, but libtool could" ++ $echo "*** not find such a program. So, this module is probably useless." ++ $echo "*** \`nm' from GNU binutils and a full rebuild may help." + fi + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" +@@ -2761,16 +3791,16 @@ + build_libtool_libs=no + fi + else +- echo "*** The inter-library dependencies that have been dropped here will be" +- echo "*** automatically added whenever a program is linked with this library" +- echo "*** or is declared to -dlopen it." +- +- if test $allow_undefined = no; then +- echo +- echo "*** Since this library must not contain undefined symbols," +- echo "*** because either the platform does not support them or" +- echo "*** it was explicitly requested with -no-undefined," +- echo "*** libtool will only create a static version of it." ++ $echo "*** The inter-library dependencies that have been dropped here will be" ++ $echo "*** automatically added whenever a program is linked with this library" ++ $echo "*** or is declared to -dlopen it." ++ ++ if test "$allow_undefined" = no; then ++ $echo ++ $echo "*** Since this library must not contain undefined symbols," ++ $echo "*** because either the platform does not support them or" ++ $echo "*** it was explicitly requested with -no-undefined," ++ $echo "*** libtool will only create a static version of it." + if test "$build_old_libs" = no; then + oldlibs="$output_objdir/$libname.$libext" + build_libtool_libs=module +@@ -2785,6 +3815,35 @@ + deplibs=$newdeplibs + fi + ++ ++ # move library search paths that coincide with paths to not yet ++ # installed libraries to the beginning of the library search list ++ new_libs= ++ for path in $notinst_path; do ++ case " $new_libs " in ++ *" -L$path/$objdir "*) ;; ++ *) ++ case " $deplibs " in ++ *" -L$path/$objdir "*) ++ new_libs="$new_libs -L$path/$objdir" ;; ++ esac ++ ;; ++ esac ++ done ++ for deplib in $deplibs; do ++ case $deplib in ++ -L*) ++ case " $new_libs " in ++ *" $deplib "*) ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac ++ ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac ++ done ++ deplibs="$new_libs" ++ ++ + # All the library-specific variables (install_libdir is set above). + library_names= + old_library= +@@ -2792,7 +3851,7 @@ + + # Test again, we may have decided not to build it any more + if test "$build_libtool_libs" = yes; then +- if test $hardcode_into_libs = yes; then ++ if test "$hardcode_into_libs" = yes; then + # Hardcode the library paths + hardcode_libdirs= + dep_rpath= +@@ -2828,7 +3887,11 @@ + if test -n "$hardcode_libdir_separator" && + test -n "$hardcode_libdirs"; then + libdir="$hardcode_libdirs" +- eval dep_rpath=\"$hardcode_libdir_flag_spec\" ++ if test -n "$hardcode_libdir_flag_spec_ld"; then ++ eval dep_rpath=\"$hardcode_libdir_flag_spec_ld\" ++ else ++ eval dep_rpath=\"$hardcode_libdir_flag_spec\" ++ fi + fi + if test -n "$runpath_var" && test -n "$perm_rpath"; then + # We should set the runpath_var. +@@ -2848,6 +3911,7 @@ + fi + + # Get the real and link names of the library. ++ eval shared_ext=\"$shrext_cmds\" + eval library_names=\"$library_names_spec\" + set dummy $library_names + realname="$2" +@@ -2858,31 +3922,17 @@ + else + soname="$realname" + fi +- test -z "$dlname" && dlname=$soname ++ if test -z "$dlname"; then ++ dlname=$soname ++ fi + + lib="$output_objdir/$realname" ++ linknames= + for link + do + linknames="$linknames $link" + done + +- # Ensure that we have .o objects for linkers which dislike .lo +- # (e.g. aix) in case we are running --disable-static +- for obj in $libobjs; do +- xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$xdir" = "X$obj"; then +- xdir="." +- else +- xdir="$xdir" +- fi +- baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` +- oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` +- if test ! -f $xdir/$oldobj; then +- $show "(cd $xdir && ${LN_S} $baseobj $oldobj)" +- $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $? +- fi +- done +- + # Use standard objects if they are pic + test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` + +@@ -2892,17 +3942,29 @@ + $show "generating symbol list for \`$libname.la'" + export_symbols="$output_objdir/$libname.exp" + $run $rm $export_symbols +- eval cmds=\"$export_symbols_cmds\" ++ cmds=$export_symbols_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" +- $show "$cmd" +- $run eval "$cmd" || exit $? ++ eval cmd=\"$cmd\" ++ if len=`expr "X$cmd" : ".*"` && ++ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then ++ $show "$cmd" ++ $run eval "$cmd" || exit $? ++ skipped_export=false ++ else ++ # The command line is too long to execute in one step. ++ $show "using reloadable object file for export list..." ++ skipped_export=: ++ # Break out early, otherwise skipped_export may be ++ # set to false by a later but shorter cmd. ++ break ++ fi + done + IFS="$save_ifs" + if test -n "$export_symbols_regex"; then +- $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" +- $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' ++ $show "$EGREP -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" ++ $run eval '$EGREP -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' + $show "$mv \"${export_symbols}T\" \"$export_symbols\"" + $run eval '$mv "${export_symbols}T" "$export_symbols"' + fi +@@ -2913,46 +3975,30 @@ + $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' + fi + ++ tmp_deplibs= ++ for test_deplib in $deplibs; do ++ case " $convenience " in ++ *" $test_deplib "*) ;; ++ *) ++ tmp_deplibs="$tmp_deplibs $test_deplib" ++ ;; ++ esac ++ done ++ deplibs="$tmp_deplibs" ++ + if test -n "$convenience"; then + if test -n "$whole_archive_flag_spec"; then ++ save_libobjs=$libobjs + eval libobjs=\"\$libobjs $whole_archive_flag_spec\" + else + gentop="$output_objdir/${outputname}x" +- $show "${rm}r $gentop" +- $run ${rm}r "$gentop" +- $show "mkdir $gentop" +- $run mkdir "$gentop" +- status=$? +- if test $status -ne 0 && test ! -d "$gentop"; then +- exit $status +- fi + generated="$generated $gentop" + +- for xlib in $convenience; do +- # Extract the objects. +- case $xlib in +- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; +- *) xabs=`pwd`"/$xlib" ;; +- esac +- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` +- xdir="$gentop/$xlib" +- +- $show "${rm}r $xdir" +- $run ${rm}r "$xdir" +- $show "mkdir $xdir" +- $run mkdir "$xdir" +- status=$? +- if test $status -ne 0 && test ! -d "$xdir"; then +- exit $status +- fi +- $show "(cd $xdir && $AR x $xabs)" +- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? +- +- libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` +- done ++ func_extract_archives $gentop $convenience ++ libobjs="$libobjs $func_extract_archives_result" + fi + fi +- ++ + if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then + eval flag=\"$thread_safe_flag_spec\" + linker_flags="$linker_flags $flag" +@@ -2964,34 +4010,175 @@ + fi + + # Do each of the archive commands. ++ if test "$module" = yes && test -n "$module_cmds" ; then ++ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then ++ eval test_cmds=\"$module_expsym_cmds\" ++ cmds=$module_expsym_cmds ++ else ++ eval test_cmds=\"$module_cmds\" ++ cmds=$module_cmds ++ fi ++ else + if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then +- eval cmds=\"$archive_expsym_cmds\" ++ eval test_cmds=\"$archive_expsym_cmds\" ++ cmds=$archive_expsym_cmds ++ else ++ eval test_cmds=\"$archive_cmds\" ++ cmds=$archive_cmds ++ fi ++ fi ++ ++ if test "X$skipped_export" != "X:" && ++ len=`expr "X$test_cmds" : ".*" 2>/dev/null` && ++ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then ++ : + else +- save_deplibs="$deplibs" +- for conv in $convenience; do +- tmp_deplibs= +- for test_deplib in $deplibs; do +- if test "$test_deplib" != "$conv"; then +- tmp_deplibs="$tmp_deplibs $test_deplib" ++ # The command line is too long to link in one step, link piecewise. ++ $echo "creating reloadable object files..." ++ ++ # Save the value of $output and $libobjs because we want to ++ # use them later. If we have whole_archive_flag_spec, we ++ # want to use save_libobjs as it was before ++ # whole_archive_flag_spec was expanded, because we can't ++ # assume the linker understands whole_archive_flag_spec. ++ # This may have to be revisited, in case too many ++ # convenience libraries get linked in and end up exceeding ++ # the spec. ++ if test -z "$convenience" || test -z "$whole_archive_flag_spec"; then ++ save_libobjs=$libobjs ++ fi ++ save_output=$output ++ output_la=`$echo "X$output" | $Xsed -e "$basename"` ++ ++ # Clear the reloadable object creation command queue and ++ # initialize k to one. ++ test_cmds= ++ concat_cmds= ++ objlist= ++ delfiles= ++ last_robj= ++ k=1 ++ output=$output_objdir/$output_la-${k}.$objext ++ # Loop over the list of objects to be linked. ++ for obj in $save_libobjs ++ do ++ eval test_cmds=\"$reload_cmds $objlist $last_robj\" ++ if test "X$objlist" = X || ++ { len=`expr "X$test_cmds" : ".*" 2>/dev/null` && ++ test "$len" -le "$max_cmd_len"; }; then ++ objlist="$objlist $obj" ++ else ++ # The command $test_cmds is almost too long, add a ++ # command to the queue. ++ if test "$k" -eq 1 ; then ++ # The first file doesn't have a previous command to add. ++ eval concat_cmds=\"$reload_cmds $objlist $last_robj\" ++ else ++ # All subsequent reloadable object files will link in ++ # the last one created. ++ eval concat_cmds=\"\$concat_cmds~$reload_cmds $objlist $last_robj\" + fi +- done +- deplibs="$tmp_deplibs" ++ last_robj=$output_objdir/$output_la-${k}.$objext ++ k=`expr $k + 1` ++ output=$output_objdir/$output_la-${k}.$objext ++ objlist=$obj ++ len=1 ++ fi ++ done ++ # Handle the remaining objects by creating one last ++ # reloadable object file. All subsequent reloadable object ++ # files will link in the last one created. ++ test -z "$concat_cmds" || concat_cmds=$concat_cmds~ ++ eval concat_cmds=\"\${concat_cmds}$reload_cmds $objlist $last_robj\" ++ ++ if ${skipped_export-false}; then ++ $show "generating symbol list for \`$libname.la'" ++ export_symbols="$output_objdir/$libname.exp" ++ $run $rm $export_symbols ++ libobjs=$output ++ # Append the command to create the export file. ++ eval concat_cmds=\"\$concat_cmds~$export_symbols_cmds\" ++ fi ++ ++ # Set up a command to remove the reloadable object files ++ # after they are used. ++ i=0 ++ while test "$i" -lt "$k" ++ do ++ i=`expr $i + 1` ++ delfiles="$delfiles $output_objdir/$output_la-${i}.$objext" ++ done ++ ++ $echo "creating a temporary reloadable object file: $output" ++ ++ # Loop through the commands generated above and execute them. ++ save_ifs="$IFS"; IFS='~' ++ for cmd in $concat_cmds; do ++ IFS="$save_ifs" ++ $show "$cmd" ++ $run eval "$cmd" || exit $? + done +- eval cmds=\"$archive_cmds\" +- deplibs="$save_deplibs" ++ IFS="$save_ifs" ++ ++ libobjs=$output ++ # Restore the value of output. ++ output=$save_output ++ ++ if test -n "$convenience" && test -n "$whole_archive_flag_spec"; then ++ eval libobjs=\"\$libobjs $whole_archive_flag_spec\" ++ fi ++ # Expand the library linking commands again to reset the ++ # value of $libobjs for piecewise linking. ++ ++ # Do each of the archive commands. ++ if test "$module" = yes && test -n "$module_cmds" ; then ++ if test -n "$export_symbols" && test -n "$module_expsym_cmds"; then ++ cmds=$module_expsym_cmds ++ else ++ cmds=$module_cmds ++ fi ++ else ++ if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then ++ cmds=$archive_expsym_cmds ++ else ++ cmds=$archive_cmds ++ fi ++ fi ++ ++ # Append the command to remove the reloadable object files ++ # to the just-reset $cmds. ++ eval cmds=\"\$cmds~\$rm $delfiles\" + fi + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" ++ eval cmd=\"$cmd\" + $show "$cmd" +- $run eval "$cmd" || exit $? ++ $run eval "$cmd" || { ++ lt_exit=$? ++ ++ # Restore the uninstalled library and exit ++ if test "$mode" = relink; then ++ $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' ++ fi ++ ++ exit $lt_exit ++ } + done + IFS="$save_ifs" + + # Restore the uninstalled library and exit + if test "$mode" = relink; then + $run eval '(cd $output_objdir && $rm ${realname}T && $mv $realname ${realname}T && $mv "$realname"U $realname)' || exit $? +- exit 0 ++ ++ if test -n "$convenience"; then ++ if test -z "$whole_archive_flag_spec"; then ++ $show "${rm}r $gentop" ++ $run ${rm}r "$gentop" ++ fi ++ fi ++ ++ exit $EXIT_SUCCESS + fi + + # Create links to the real library. +@@ -3039,7 +4226,7 @@ + *.lo) + if test -n "$objs$old_deplibs"; then + $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + libobj="$output" + obj=`$echo "X$output" | $Xsed -e "$lo2o"` +@@ -3068,38 +4255,10 @@ + eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" + else + gentop="$output_objdir/${obj}x" +- $show "${rm}r $gentop" +- $run ${rm}r "$gentop" +- $show "mkdir $gentop" +- $run mkdir "$gentop" +- status=$? +- if test $status -ne 0 && test ! -d "$gentop"; then +- exit $status +- fi + generated="$generated $gentop" + +- for xlib in $convenience; do +- # Extract the objects. +- case $xlib in +- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; +- *) xabs=`pwd`"/$xlib" ;; +- esac +- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` +- xdir="$gentop/$xlib" +- +- $show "${rm}r $xdir" +- $run ${rm}r "$xdir" +- $show "mkdir $xdir" +- $run mkdir "$xdir" +- status=$? +- if test $status -ne 0 && test ! -d "$xdir"; then +- exit $status +- fi +- $show "(cd $xdir && $AR x $xabs)" +- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? +- +- reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` +- done ++ func_extract_archives $gentop $convenience ++ reload_conv_objs="$reload_objs $func_extract_archives_result" + fi + fi + +@@ -3107,10 +4266,11 @@ + reload_objs="$objs$old_deplibs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" ### testsuite: skip nested quoting test + + output="$obj" +- eval cmds=\"$reload_cmds\" ++ cmds=$reload_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" ++ eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done +@@ -3123,7 +4283,7 @@ + $run ${rm}r $gentop + fi + +- exit 0 ++ exit $EXIT_SUCCESS + fi + + if test "$build_libtool_libs" != yes; then +@@ -3134,37 +4294,24 @@ + + # Create an invalid libtool object if no PIC, so that we don't + # accidentally link it into a program. +- $show "echo timestamp > $libobj" +- $run eval "echo timestamp > $libobj" || exit $? +- exit 0 ++ # $show "echo timestamp > $libobj" ++ # $run eval "echo timestamp > $libobj" || exit $? ++ exit $EXIT_SUCCESS + fi + + if test -n "$pic_flag" || test "$pic_mode" != default; then + # Only do commands if we really have different PIC objects. + reload_objs="$libobjs $reload_conv_objs" + output="$libobj" +- eval cmds=\"$reload_cmds\" ++ cmds=$reload_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" ++ eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done + IFS="$save_ifs" +- else +- # Just create a symlink. +- $show $rm $libobj +- $run $rm $libobj +- xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$xdir" = "X$libobj"; then +- xdir="." +- else +- xdir="$xdir" +- fi +- baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` +- oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` +- $show "(cd $xdir && $LN_S $oldobj $baseobj)" +- $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $? + fi + + if test -n "$gentop"; then +@@ -3172,12 +4319,12 @@ + $run ${rm}r $gentop + fi + +- exit 0 ++ exit $EXIT_SUCCESS + ;; + + prog) + case $host in +- *cygwin*) output=`echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; ++ *cygwin*) output=`$echo $output | ${SED} -e 's,.exe$,,;s,$,.exe,'` ;; + esac + if test -n "$vinfo"; then + $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 +@@ -3199,16 +4346,48 @@ + # On Rhapsody replace the C library is the System framework + compile_deplibs=`$echo "X $compile_deplibs" | $Xsed -e 's/ -lc / -framework System /'` + finalize_deplibs=`$echo "X $finalize_deplibs" | $Xsed -e 's/ -lc / -framework System /'` +- case $host in +- *darwin*) +- # Don't allow lazy linking, it breaks C++ global constructors +- compile_command="$compile_command ${wl}-bind_at_load" +- finalize_command="$finalize_command ${wl}-bind_at_load" +- ;; +- esac + ;; + esac + ++ case $host in ++ *darwin*) ++ # Don't allow lazy linking, it breaks C++ global constructors ++ if test "$tagname" = CXX ; then ++ compile_command="$compile_command ${wl}-bind_at_load" ++ finalize_command="$finalize_command ${wl}-bind_at_load" ++ fi ++ ;; ++ esac ++ ++ ++ # move library search paths that coincide with paths to not yet ++ # installed libraries to the beginning of the library search list ++ new_libs= ++ for path in $notinst_path; do ++ case " $new_libs " in ++ *" -L$path/$objdir "*) ;; ++ *) ++ case " $compile_deplibs " in ++ *" -L$path/$objdir "*) ++ new_libs="$new_libs -L$path/$objdir" ;; ++ esac ++ ;; ++ esac ++ done ++ for deplib in $compile_deplibs; do ++ case $deplib in ++ -L*) ++ case " $new_libs " in ++ *" $deplib "*) ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac ++ ;; ++ *) new_libs="$new_libs $deplib" ;; ++ esac ++ done ++ compile_deplibs="$new_libs" ++ ++ + compile_command="$compile_command $compile_deplibs" + finalize_command="$finalize_command $finalize_deplibs" + +@@ -3253,10 +4432,15 @@ + fi + case $host in + *-*-cygwin* | *-*-mingw* | *-*-pw32* | *-*-os2*) ++ testbindir=`$echo "X$libdir" | $Xsed -e 's*/lib$*/bin*'` + case :$dllsearchpath: in + *":$libdir:"*) ;; + *) dllsearchpath="$dllsearchpath:$libdir";; + esac ++ case :$dllsearchpath: in ++ *":$testbindir:"*) ;; ++ *) dllsearchpath="$dllsearchpath:$testbindir";; ++ esac + ;; + esac + done +@@ -3359,31 +4543,43 @@ + done + + if test -n "$exclude_expsyms"; then +- $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' ++ $run eval '$EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' + $run eval '$mv "$nlist"T "$nlist"' + fi + + if test -n "$export_symbols_regex"; then +- $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T' ++ $run eval '$EGREP -e "$export_symbols_regex" "$nlist" > "$nlist"T' + $run eval '$mv "$nlist"T "$nlist"' + fi + + # Prepare the list of exported symbols + if test -z "$export_symbols"; then +- export_symbols="$output_objdir/$output.exp" ++ export_symbols="$output_objdir/$outputname.exp" + $run $rm $export_symbols +- $run eval "${SED} -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' ++ $run eval "${SED} -n -e '/^: @PROGRAM@ $/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' ++ case $host in ++ *cygwin* | *mingw* ) ++ $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' ++ $run eval 'cat "$export_symbols" >> "$output_objdir/$outputname.def"' ++ ;; ++ esac + else +- $run eval "${SED} -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' +- $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' ++ $run eval "${SED} -e 's/\([].[*^$]\)/\\\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$outputname.exp"' ++ $run eval 'grep -f "$output_objdir/$outputname.exp" < "$nlist" > "$nlist"T' + $run eval 'mv "$nlist"T "$nlist"' ++ case $host in ++ *cygwin* | *mingw* ) ++ $run eval "echo EXPORTS "'> "$output_objdir/$outputname.def"' ++ $run eval 'cat "$nlist" >> "$output_objdir/$outputname.def"' ++ ;; ++ esac + fi + fi + + for arg in $dlprefiles; do + $show "extracting global C symbols from \`$arg'" +- name=`echo "$arg" | ${SED} -e 's%^.*/%%'` +- $run eval 'echo ": $name " >> "$nlist"' ++ name=`$echo "$arg" | ${SED} -e 's%^.*/%%'` ++ $run eval '$echo ": $name " >> "$nlist"' + $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" + done + +@@ -3392,7 +4588,7 @@ + test -f "$nlist" || : > "$nlist" + + if test -n "$exclude_expsyms"; then +- egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T ++ $EGREP -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T + $mv "$nlist"T "$nlist" + fi + +@@ -3412,7 +4608,7 @@ + if test -f "$nlist"S; then + eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' + else +- echo '/* NONE */' >> "$output_objdir/$dlsyms" ++ $echo '/* NONE */' >> "$output_objdir/$dlsyms" + fi + + $echo >> "$output_objdir/$dlsyms" "\ +@@ -3427,7 +4623,26 @@ + #endif + + /* The mapping between symbol names and symbols. */ ++" ++ ++ case $host in ++ *cygwin* | *mingw* ) ++ $echo >> "$output_objdir/$dlsyms" "\ ++/* DATA imports from DLLs on WIN32 can't be const, because ++ runtime relocations are performed -- see ld's documentation ++ on pseudo-relocs */ ++struct { ++" ++ ;; ++ * ) ++ $echo >> "$output_objdir/$dlsyms" "\ + const struct { ++" ++ ;; ++ esac ++ ++ ++ $echo >> "$output_objdir/$dlsyms" "\ + const char *name; + lt_ptr address; + } +@@ -3464,30 +4679,43 @@ + *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*) + case "$compile_command " in + *" -static "*) ;; +- *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";; ++ *) pic_flag_for_symtable=" $pic_flag -DFREEBSD_WORKAROUND";; + esac;; + *-*-hpux*) + case "$compile_command " in + *" -static "*) ;; +- *) pic_flag_for_symtable=" $pic_flag -DPIC";; ++ *) pic_flag_for_symtable=" $pic_flag";; + esac + esac + + # Now compile the dynamic symbol file. +- $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" +- $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? ++ $show "(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" ++ $run eval '(cd $output_objdir && $LTCC $LTCFLAGS -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? + + # Clean up the generated files. + $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" + $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" + + # Transform the symbol file into the correct name. +- compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` +- finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` ++ case $host in ++ *cygwin* | *mingw* ) ++ if test -f "$output_objdir/${outputname}.def" ; then ++ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"` ++ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}.def $output_objdir/${outputname}S.${objext}%"` ++ else ++ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` ++ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` ++ fi ++ ;; ++ * ) ++ compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` ++ finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` ++ ;; ++ esac + ;; + *) + $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + esac + else +@@ -3500,7 +4728,7 @@ + finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` + fi + +- if test $need_relink = no || test "$build_libtool_libs" != yes; then ++ if test "$need_relink" = no || test "$build_libtool_libs" != yes; then + # Replace the output file specification. + compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` + link_command="$compile_command$compile_rpath" +@@ -3508,7 +4736,7 @@ + # We have no uninstalled library dependencies, so finalize right now. + $show "$link_command" + $run eval "$link_command" +- status=$? ++ exit_status=$? + + # Delete the generated files. + if test -n "$dlsyms"; then +@@ -3516,7 +4744,7 @@ + $run $rm "$output_objdir/${outputname}S.${objext}" + fi + +- exit $status ++ exit $exit_status + fi + + if test -n "$shlibpath_var"; then +@@ -3575,7 +4803,7 @@ + # Link the executable and exit + $show "$link_command" + $run eval "$link_command" || exit $? +- exit 0 ++ exit $EXIT_SUCCESS + fi + + if test "$hardcode_action" = relink; then +@@ -3630,10 +4858,10 @@ + fi + + # Quote $echo for shipping. +- if test "X$echo" = "X$SHELL $0 --fallback-echo"; then +- case $0 in +- [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";; +- *) qecho="$SHELL `pwd`/$0 --fallback-echo";; ++ if test "X$echo" = "X$SHELL $progpath --fallback-echo"; then ++ case $progpath in ++ [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $progpath --fallback-echo";; ++ *) qecho="$SHELL `pwd`/$progpath --fallback-echo";; + esac + qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` + else +@@ -3645,15 +4873,376 @@ + # win32 will think the script is a binary if it has + # a .exe suffix, so we strip it off here. + case $output in +- *.exe) output=`echo $output|${SED} 's,.exe$,,'` ;; ++ *.exe) output=`$echo $output|${SED} 's,.exe$,,'` ;; + esac + # test for cygwin because mv fails w/o .exe extensions + case $host in +- *cygwin*) exeext=.exe ;; ++ *cygwin*) ++ exeext=.exe ++ outputname=`$echo $outputname|${SED} 's,.exe$,,'` ;; + *) exeext= ;; + esac +- $rm $output +- trap "$rm $output; exit 1" 1 2 15 ++ case $host in ++ *cygwin* | *mingw* ) ++ output_name=`basename $output` ++ output_path=`dirname $output` ++ cwrappersource="$output_path/$objdir/lt-$output_name.c" ++ cwrapper="$output_path/$output_name.exe" ++ $rm $cwrappersource $cwrapper ++ trap "$rm $cwrappersource $cwrapper; exit $EXIT_FAILURE" 1 2 15 ++ ++ cat > $cwrappersource <> $cwrappersource<<"EOF" ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++#include ++ ++#if defined(PATH_MAX) ++# define LT_PATHMAX PATH_MAX ++#elif defined(MAXPATHLEN) ++# define LT_PATHMAX MAXPATHLEN ++#else ++# define LT_PATHMAX 1024 ++#endif ++ ++#ifndef DIR_SEPARATOR ++# define DIR_SEPARATOR '/' ++# define PATH_SEPARATOR ':' ++#endif ++ ++#if defined (_WIN32) || defined (__MSDOS__) || defined (__DJGPP__) || \ ++ defined (__OS2__) ++# define HAVE_DOS_BASED_FILE_SYSTEM ++# ifndef DIR_SEPARATOR_2 ++# define DIR_SEPARATOR_2 '\\' ++# endif ++# ifndef PATH_SEPARATOR_2 ++# define PATH_SEPARATOR_2 ';' ++# endif ++#endif ++ ++#ifndef DIR_SEPARATOR_2 ++# define IS_DIR_SEPARATOR(ch) ((ch) == DIR_SEPARATOR) ++#else /* DIR_SEPARATOR_2 */ ++# define IS_DIR_SEPARATOR(ch) \ ++ (((ch) == DIR_SEPARATOR) || ((ch) == DIR_SEPARATOR_2)) ++#endif /* DIR_SEPARATOR_2 */ ++ ++#ifndef PATH_SEPARATOR_2 ++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR) ++#else /* PATH_SEPARATOR_2 */ ++# define IS_PATH_SEPARATOR(ch) ((ch) == PATH_SEPARATOR_2) ++#endif /* PATH_SEPARATOR_2 */ ++ ++#define XMALLOC(type, num) ((type *) xmalloc ((num) * sizeof(type))) ++#define XFREE(stale) do { \ ++ if (stale) { free ((void *) stale); stale = 0; } \ ++} while (0) ++ ++/* -DDEBUG is fairly common in CFLAGS. */ ++#undef DEBUG ++#if defined DEBUGWRAPPER ++# define DEBUG(format, ...) fprintf(stderr, format, __VA_ARGS__) ++#else ++# define DEBUG(format, ...) ++#endif ++ ++const char *program_name = NULL; ++ ++void * xmalloc (size_t num); ++char * xstrdup (const char *string); ++const char * base_name (const char *name); ++char * find_executable(const char *wrapper); ++int check_executable(const char *path); ++char * strendzap(char *str, const char *pat); ++void lt_fatal (const char *message, ...); ++ ++int ++main (int argc, char *argv[]) ++{ ++ char **newargz; ++ int i; ++ ++ program_name = (char *) xstrdup (base_name (argv[0])); ++ DEBUG("(main) argv[0] : %s\n",argv[0]); ++ DEBUG("(main) program_name : %s\n",program_name); ++ newargz = XMALLOC(char *, argc+2); ++EOF ++ ++ cat >> $cwrappersource <> $cwrappersource <<"EOF" ++ newargz[1] = find_executable(argv[0]); ++ if (newargz[1] == NULL) ++ lt_fatal("Couldn't find %s", argv[0]); ++ DEBUG("(main) found exe at : %s\n",newargz[1]); ++ /* we know the script has the same name, without the .exe */ ++ /* so make sure newargz[1] doesn't end in .exe */ ++ strendzap(newargz[1],".exe"); ++ for (i = 1; i < argc; i++) ++ newargz[i+1] = xstrdup(argv[i]); ++ newargz[argc+1] = NULL; ++ ++ for (i=0; i> $cwrappersource <> $cwrappersource <> $cwrappersource <<"EOF" ++ return 127; ++} ++ ++void * ++xmalloc (size_t num) ++{ ++ void * p = (void *) malloc (num); ++ if (!p) ++ lt_fatal ("Memory exhausted"); ++ ++ return p; ++} ++ ++char * ++xstrdup (const char *string) ++{ ++ return string ? strcpy ((char *) xmalloc (strlen (string) + 1), string) : NULL ++; ++} ++ ++const char * ++base_name (const char *name) ++{ ++ const char *base; ++ ++#if defined (HAVE_DOS_BASED_FILE_SYSTEM) ++ /* Skip over the disk name in MSDOS pathnames. */ ++ if (isalpha ((unsigned char)name[0]) && name[1] == ':') ++ name += 2; ++#endif ++ ++ for (base = name; *name; name++) ++ if (IS_DIR_SEPARATOR (*name)) ++ base = name + 1; ++ return base; ++} ++ ++int ++check_executable(const char * path) ++{ ++ struct stat st; ++ ++ DEBUG("(check_executable) : %s\n", path ? (*path ? path : "EMPTY!") : "NULL!"); ++ if ((!path) || (!*path)) ++ return 0; ++ ++ if ((stat (path, &st) >= 0) && ++ ( ++ /* MinGW & native WIN32 do not support S_IXOTH or S_IXGRP */ ++#if defined (S_IXOTH) ++ ((st.st_mode & S_IXOTH) == S_IXOTH) || ++#endif ++#if defined (S_IXGRP) ++ ((st.st_mode & S_IXGRP) == S_IXGRP) || ++#endif ++ ((st.st_mode & S_IXUSR) == S_IXUSR)) ++ ) ++ return 1; ++ else ++ return 0; ++} ++ ++/* Searches for the full path of the wrapper. Returns ++ newly allocated full path name if found, NULL otherwise */ ++char * ++find_executable (const char* wrapper) ++{ ++ int has_slash = 0; ++ const char* p; ++ const char* p_next; ++ /* static buffer for getcwd */ ++ char tmp[LT_PATHMAX + 1]; ++ int tmp_len; ++ char* concat_name; ++ ++ DEBUG("(find_executable) : %s\n", wrapper ? (*wrapper ? wrapper : "EMPTY!") : "NULL!"); ++ ++ if ((wrapper == NULL) || (*wrapper == '\0')) ++ return NULL; ++ ++ /* Absolute path? */ ++#if defined (HAVE_DOS_BASED_FILE_SYSTEM) ++ if (isalpha ((unsigned char)wrapper[0]) && wrapper[1] == ':') ++ { ++ concat_name = xstrdup (wrapper); ++ if (check_executable(concat_name)) ++ return concat_name; ++ XFREE(concat_name); ++ } ++ else ++ { ++#endif ++ if (IS_DIR_SEPARATOR (wrapper[0])) ++ { ++ concat_name = xstrdup (wrapper); ++ if (check_executable(concat_name)) ++ return concat_name; ++ XFREE(concat_name); ++ } ++#if defined (HAVE_DOS_BASED_FILE_SYSTEM) ++ } ++#endif ++ ++ for (p = wrapper; *p; p++) ++ if (*p == '/') ++ { ++ has_slash = 1; ++ break; ++ } ++ if (!has_slash) ++ { ++ /* no slashes; search PATH */ ++ const char* path = getenv ("PATH"); ++ if (path != NULL) ++ { ++ for (p = path; *p; p = p_next) ++ { ++ const char* q; ++ size_t p_len; ++ for (q = p; *q; q++) ++ if (IS_PATH_SEPARATOR(*q)) ++ break; ++ p_len = q - p; ++ p_next = (*q == '\0' ? q : q + 1); ++ if (p_len == 0) ++ { ++ /* empty path: current directory */ ++ if (getcwd (tmp, LT_PATHMAX) == NULL) ++ lt_fatal ("getcwd failed"); ++ tmp_len = strlen(tmp); ++ concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); ++ memcpy (concat_name, tmp, tmp_len); ++ concat_name[tmp_len] = '/'; ++ strcpy (concat_name + tmp_len + 1, wrapper); ++ } ++ else ++ { ++ concat_name = XMALLOC(char, p_len + 1 + strlen(wrapper) + 1); ++ memcpy (concat_name, p, p_len); ++ concat_name[p_len] = '/'; ++ strcpy (concat_name + p_len + 1, wrapper); ++ } ++ if (check_executable(concat_name)) ++ return concat_name; ++ XFREE(concat_name); ++ } ++ } ++ /* not found in PATH; assume curdir */ ++ } ++ /* Relative path | not found in path: prepend cwd */ ++ if (getcwd (tmp, LT_PATHMAX) == NULL) ++ lt_fatal ("getcwd failed"); ++ tmp_len = strlen(tmp); ++ concat_name = XMALLOC(char, tmp_len + 1 + strlen(wrapper) + 1); ++ memcpy (concat_name, tmp, tmp_len); ++ concat_name[tmp_len] = '/'; ++ strcpy (concat_name + tmp_len + 1, wrapper); ++ ++ if (check_executable(concat_name)) ++ return concat_name; ++ XFREE(concat_name); ++ return NULL; ++} ++ ++char * ++strendzap(char *str, const char *pat) ++{ ++ size_t len, patlen; ++ ++ assert(str != NULL); ++ assert(pat != NULL); ++ ++ len = strlen(str); ++ patlen = strlen(pat); ++ ++ if (patlen <= len) ++ { ++ str += len - patlen; ++ if (strcmp(str, pat) == 0) ++ *str = '\0'; ++ } ++ return str; ++} ++ ++static void ++lt_error_core (int exit_status, const char * mode, ++ const char * message, va_list ap) ++{ ++ fprintf (stderr, "%s: %s: ", program_name, mode); ++ vfprintf (stderr, message, ap); ++ fprintf (stderr, ".\n"); ++ ++ if (exit_status >= 0) ++ exit (exit_status); ++} ++ ++void ++lt_fatal (const char *message, ...) ++{ ++ va_list ap; ++ va_start (ap, message); ++ lt_error_core (EXIT_FAILURE, "FATAL", message, ap); ++ va_end (ap); ++} ++EOF ++ # we should really use a build-platform specific compiler ++ # here, but OTOH, the wrappers (shell script and this C one) ++ # are only useful if you want to execute the "real" binary. ++ # Since the "real" binary is built for $host, then this ++ # wrapper might as well be built for $host, too. ++ $run $LTCC $LTCFLAGS -s -o $cwrapper $cwrappersource ++ ;; ++ esac ++ $rm $output ++ trap "$rm $output; exit $EXIT_FAILURE" 1 2 15 + + $echo > $output "\ + #! $SHELL +@@ -3669,12 +5258,12 @@ + + # Sed substitution that helps us do robust quoting. It backslashifies + # metacharacters that are still active within double-quoted strings. +-Xsed="${SED}"' -e 1s/^X//' ++Xsed='${SED} -e 1s/^X//' + sed_quote_subst='$sed_quote_subst' + + # The HP-UX ksh and POSIX shell print the target directory to stdout + # if CDPATH is set. +-if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi ++(unset CDPATH) >/dev/null 2>&1 && unset CDPATH + + relink_command=\"$relink_command\" + +@@ -3729,7 +5318,7 @@ + " + + if test "$fast_install" = yes; then +- echo >> $output "\ ++ $echo >> $output "\ + program=lt-'$outputname'$exeext + progdir=\"\$thisdir/$objdir\" + +@@ -3745,7 +5334,7 @@ + $rm \"\$progdir/\$file\" + fi" + +- echo >> $output "\ ++ $echo >> $output "\ + + # relink executable if necessary + if test -n \"\$relink_command\"; then +@@ -3753,7 +5342,7 @@ + else + $echo \"\$relink_command_output\" >&2 + $rm \"\$progdir/\$file\" +- exit 1 ++ exit $EXIT_FAILURE + fi + fi + +@@ -3763,13 +5352,13 @@ + $rm \"\$progdir/\$file\" + fi" + else +- echo >> $output "\ ++ $echo >> $output "\ + program='$outputname' + progdir=\"\$thisdir/$objdir\" + " + fi + +- echo >> $output "\ ++ $echo >> $output "\ + + if test -f \"\$progdir/\$program\"; then" + +@@ -3780,7 +5369,7 @@ + $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" + + # Some systems cannot cope with colon-terminated $shlibpath_var +- # The second colon is a workaround for a bug in BeOS R4 ${SED} ++ # The second colon is a workaround for a bug in BeOS R4 sed + $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` + + export $shlibpath_var +@@ -3800,47 +5389,35 @@ + # Run the actual program with our arguments. + " + case $host in +- # win32 systems need to use the prog path for dll +- # lookup to work +- *-*-cygwin* | *-*-pw32*) +- $echo >> $output "\ +- exec \$progdir/\$program \${1+\"\$@\"} +-" +- ;; +- + # Backslashes separate directories on plain windows + *-*-mingw | *-*-os2*) + $echo >> $output "\ +- exec \$progdir\\\\\$program \${1+\"\$@\"} ++ exec \"\$progdir\\\\\$program\" \${1+\"\$@\"} + " + ;; + + *) + $echo >> $output "\ +- # Export the path to the program. +- PATH=\"\$progdir:\$PATH\" +- export PATH +- +- exec \$program \${1+\"\$@\"} ++ exec \"\$progdir/\$program\" \${1+\"\$@\"} + " + ;; + esac + $echo >> $output "\ + \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" +- exit 1 ++ exit $EXIT_FAILURE + fi + else + # The program doesn't exist. +- \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 ++ \$echo \"\$0: error: \\\`\$progdir/\$program' does not exist\" 1>&2 + \$echo \"This script is just a wrapper for \$program.\" 1>&2 +- echo \"See the $PACKAGE documentation for more information.\" 1>&2 +- exit 1 ++ $echo \"See the $PACKAGE documentation for more information.\" 1>&2 ++ exit $EXIT_FAILURE + fi + fi\ + " + chmod +x $output + fi +- exit 0 ++ exit $EXIT_SUCCESS + ;; + esac + +@@ -3856,74 +5433,130 @@ + oldobjs="$libobjs_save" + build_libtool_libs=no + else +- oldobjs="$objs$old_deplibs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` ++ oldobjs="$old_deplibs $non_pic_objects" + fi + addlibs="$old_convenience" + fi + + if test -n "$addlibs"; then + gentop="$output_objdir/${outputname}x" +- $show "${rm}r $gentop" +- $run ${rm}r "$gentop" +- $show "mkdir $gentop" +- $run mkdir "$gentop" +- status=$? +- if test $status -ne 0 && test ! -d "$gentop"; then +- exit $status +- fi + generated="$generated $gentop" + +- # Add in members from convenience archives. +- for xlib in $addlibs; do +- # Extract the objects. +- case $xlib in +- [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; +- *) xabs=`pwd`"/$xlib" ;; +- esac +- xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` +- xdir="$gentop/$xlib" +- +- $show "${rm}r $xdir" +- $run ${rm}r "$xdir" +- $show "mkdir $xdir" +- $run mkdir "$xdir" +- status=$? +- if test $status -ne 0 && test ! -d "$xdir"; then +- exit $status +- fi +- $show "(cd $xdir && $AR x $xabs)" +- $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? +- +- oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP` +- done ++ func_extract_archives $gentop $addlibs ++ oldobjs="$oldobjs $func_extract_archives_result" + fi + + # Do each command in the archive commands. + if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then +- eval cmds=\"$old_archive_from_new_cmds\" ++ cmds=$old_archive_from_new_cmds + else +- # Ensure that we have .o objects in place in case we decided +- # not to build a shared library, and have fallen back to building +- # static libs even though --disable-static was passed! +- for oldobj in $oldobjs; do +- if test ! -f $oldobj; then +- xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'` +- if test "X$xdir" = "X$oldobj"; then +- xdir="." +- else +- xdir="$xdir" ++ # POSIX demands no paths to be encoded in archives. We have ++ # to avoid creating archives with duplicate basenames if we ++ # might have to extract them afterwards, e.g., when creating a ++ # static archive out of a convenience library, or when linking ++ # the entirety of a libtool archive into another (currently ++ # not supported by libtool). ++ if (for obj in $oldobjs ++ do ++ $echo "X$obj" | $Xsed -e 's%^.*/%%' ++ done | sort | sort -uc >/dev/null 2>&1); then ++ : ++ else ++ $echo "copying selected object files to avoid basename conflicts..." ++ ++ if test -z "$gentop"; then ++ gentop="$output_objdir/${outputname}x" ++ generated="$generated $gentop" ++ ++ $show "${rm}r $gentop" ++ $run ${rm}r "$gentop" ++ $show "$mkdir $gentop" ++ $run $mkdir "$gentop" ++ exit_status=$? ++ if test "$exit_status" -ne 0 && test ! -d "$gentop"; then ++ exit $exit_status + fi +- baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'` +- obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` +- $show "(cd $xdir && ${LN_S} $obj $baseobj)" +- $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $? + fi +- done ++ ++ save_oldobjs=$oldobjs ++ oldobjs= ++ counter=1 ++ for obj in $save_oldobjs ++ do ++ objbase=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` ++ case " $oldobjs " in ++ " ") oldobjs=$obj ;; ++ *[\ /]"$objbase "*) ++ while :; do ++ # Make sure we don't pick an alternate name that also ++ # overlaps. ++ newobj=lt$counter-$objbase ++ counter=`expr $counter + 1` ++ case " $oldobjs " in ++ *[\ /]"$newobj "*) ;; ++ *) if test ! -f "$gentop/$newobj"; then break; fi ;; ++ esac ++ done ++ $show "ln $obj $gentop/$newobj || cp $obj $gentop/$newobj" ++ $run ln "$obj" "$gentop/$newobj" || ++ $run cp "$obj" "$gentop/$newobj" ++ oldobjs="$oldobjs $gentop/$newobj" ++ ;; ++ *) oldobjs="$oldobjs $obj" ;; ++ esac ++ done ++ fi + + eval cmds=\"$old_archive_cmds\" ++ ++ if len=`expr "X$cmds" : ".*"` && ++ test "$len" -le "$max_cmd_len" || test "$max_cmd_len" -le -1; then ++ cmds=$old_archive_cmds ++ else ++ # the command line is too long to link in one step, link in parts ++ $echo "using piecewise archive linking..." ++ save_RANLIB=$RANLIB ++ RANLIB=: ++ objlist= ++ concat_cmds= ++ save_oldobjs=$oldobjs ++ ++ # Is there a better way of finding the last object in the list? ++ for obj in $save_oldobjs ++ do ++ last_oldobj=$obj ++ done ++ for obj in $save_oldobjs ++ do ++ oldobjs="$objlist $obj" ++ objlist="$objlist $obj" ++ eval test_cmds=\"$old_archive_cmds\" ++ if len=`expr "X$test_cmds" : ".*" 2>/dev/null` && ++ test "$len" -le "$max_cmd_len"; then ++ : ++ else ++ # the above command should be used before it gets too long ++ oldobjs=$objlist ++ if test "$obj" = "$last_oldobj" ; then ++ RANLIB=$save_RANLIB ++ fi ++ test -z "$concat_cmds" || concat_cmds=$concat_cmds~ ++ eval concat_cmds=\"\${concat_cmds}$old_archive_cmds\" ++ objlist= ++ fi ++ done ++ RANLIB=$save_RANLIB ++ oldobjs=$objlist ++ if test "X$oldobjs" = "X" ; then ++ eval cmds=\"\$concat_cmds\" ++ else ++ eval cmds=\"\$concat_cmds~\$old_archive_cmds\" ++ fi ++ fi + fi + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do ++ eval cmd=\"$cmd\" + IFS="$save_ifs" + $show "$cmd" + $run eval "$cmd" || exit $? +@@ -3955,8 +5588,12 @@ + fi + done + # Quote the link command for shipping. +- relink_command="(cd `pwd`; $SHELL $0 --mode=relink $libtool_args @inst_prefix_dir@)" ++ relink_command="(cd `pwd`; $SHELL $progpath $preserve_args --mode=relink $libtool_args @inst_prefix_dir@)" + relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` ++ if test "$hardcode_automatic" = yes ; then ++ relink_command= ++ fi ++ + + # Only create the output if not a dry run. + if test -z "$run"; then +@@ -3975,7 +5612,7 @@ + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $deplib` + if test -z "$libdir"; then + $echo "$modename: \`$deplib' is not a valid libtool archive" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + newdependency_libs="$newdependency_libs $libdir/$name" + ;; +@@ -3989,7 +5626,7 @@ + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + if test -z "$libdir"; then + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + newdlfiles="$newdlfiles $libdir/$name" + done +@@ -4000,17 +5637,36 @@ + eval libdir=`${SED} -n -e 's/^libdir=\(.*\)$/\1/p' $lib` + if test -z "$libdir"; then + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + newdlprefiles="$newdlprefiles $libdir/$name" + done + dlprefiles="$newdlprefiles" ++ else ++ newdlfiles= ++ for lib in $dlfiles; do ++ case $lib in ++ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; ++ *) abs=`pwd`"/$lib" ;; ++ esac ++ newdlfiles="$newdlfiles $abs" ++ done ++ dlfiles="$newdlfiles" ++ newdlprefiles= ++ for lib in $dlprefiles; do ++ case $lib in ++ [\\/]* | [A-Za-z]:[\\/]*) abs="$lib" ;; ++ *) abs=`pwd`"/$lib" ;; ++ esac ++ newdlprefiles="$newdlprefiles $abs" ++ done ++ dlprefiles="$newdlprefiles" + fi + $rm $output + # place dlname in correct position for cygwin + tdlname=$dlname + case $host,$output,$installed,$module,$dlname in +- *cygwin*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; ++ *cygwin*,*lai,yes,no,*.dll | *mingw*,*lai,yes,no,*.dll) tdlname=../bin/$dlname ;; + esac + $echo > $output "\ + # $outputname - a libtool library file +@@ -4039,13 +5695,16 @@ + # Is this an already installed library? + installed=$installed + ++# Should we warn about portability when linking against -modules? ++shouldnotlink=$module ++ + # Files to dlopen/dlpreopen + dlopen='$dlfiles' + dlpreopen='$dlprefiles' + + # Directory that this library needs to be installed in: + libdir='$install_libdir'" +- if test "$installed" = no && test $need_relink = yes; then ++ if test "$installed" = no && test "$need_relink" = yes; then + $echo >> $output "\ + relink_command=\"$relink_command\"" + fi +@@ -4058,7 +5717,7 @@ + $run eval '(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)' || exit $? + ;; + esac +- exit 0 ++ exit $EXIT_SUCCESS + ;; + + # libtool install mode +@@ -4069,11 +5728,11 @@ + # install_prog (especially on Windows NT). + if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh || + # Allow the use of GNU shtool's install command. +- $echo "X$nonopt" | $Xsed | grep shtool > /dev/null; then ++ $echo "X$nonopt" | grep shtool > /dev/null; then + # Aesthetically quote it. + arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` + case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac +@@ -4082,14 +5741,14 @@ + shift + else + install_prog= +- arg="$nonopt" ++ arg=$nonopt + fi + + # The real first argument should be the name of the installation program. + # Aesthetically quote it. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac +@@ -4107,28 +5766,31 @@ + do + if test -n "$dest"; then + files="$files $dest" +- dest="$arg" ++ dest=$arg + continue + fi + + case $arg in + -d) isdir=yes ;; +- -f) prev="-f" ;; +- -g) prev="-g" ;; +- -m) prev="-m" ;; +- -o) prev="-o" ;; ++ -f) ++ case " $install_prog " in ++ *[\\\ /]cp\ *) ;; ++ *) prev=$arg ;; ++ esac ++ ;; ++ -g | -m | -o) prev=$arg ;; + -s) + stripme=" -s" + continue + ;; +- -*) ;; +- ++ -*) ++ ;; + *) + # If the previous option needed an argument, then skip it. + if test -n "$prev"; then + prev= + else +- dest="$arg" ++ dest=$arg + continue + fi + ;; +@@ -4137,7 +5799,7 @@ + # Aesthetically quote the argument. + arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` + case $arg in +- *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) ++ *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*|"") + arg="\"$arg\"" + ;; + esac +@@ -4147,13 +5809,13 @@ + if test -z "$install_prog"; then + $echo "$modename: you must specify an install program" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + if test -n "$prev"; then + $echo "$modename: the \`$prev' option requires an argument" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + if test -z "$files"; then +@@ -4163,7 +5825,7 @@ + $echo "$modename: you must specify a destination" 1>&2 + fi + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + # Strip any trailing slash from the destination. +@@ -4181,10 +5843,10 @@ + + # Not a directory, so check to see that there is only one file specified. + set dummy $files +- if test $# -gt 2; then ++ if test "$#" -gt 2; then + $echo "$modename: \`$dest' is not a directory" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + fi + case $destdir in +@@ -4196,7 +5858,7 @@ + *) + $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + esac + done +@@ -4221,11 +5883,11 @@ + + *.la) + # Check to see that this really is a libtool archive. +- if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : ++ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + library_names= +@@ -4256,30 +5918,33 @@ + dir="$dir$objdir" + + if test -n "$relink_command"; then +- # Determine the prefix the user has applied to our future dir. +- inst_prefix_dir=`$echo "$destdir" | sed "s%$libdir\$%%"` +- +- # Don't allow the user to place us outside of our expected +- # location b/c this prevents finding dependent libraries that +- # are installed to the same prefix. +- if test "$inst_prefix_dir" = "$destdir"; then +- $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 +- exit 1 +- fi +- +- if test -n "$inst_prefix_dir"; then +- # Stick the inst_prefix_dir data into the link command. +- relink_command=`$echo "$relink_command" | sed "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` +- else +- relink_command=`$echo "$relink_command" | sed "s%@inst_prefix_dir@%%"` +- fi ++ # Determine the prefix the user has applied to our future dir. ++ inst_prefix_dir=`$echo "$destdir" | $SED "s%$libdir\$%%"` ++ ++ # Don't allow the user to place us outside of our expected ++ # location b/c this prevents finding dependent libraries that ++ # are installed to the same prefix. ++ # At present, this check doesn't affect windows .dll's that ++ # are installed into $libdir/../bin (currently, that works fine) ++ # but it's something to keep an eye on. ++ if test "$inst_prefix_dir" = "$destdir"; then ++ $echo "$modename: error: cannot install \`$file' to a directory not ending in $libdir" 1>&2 ++ exit $EXIT_FAILURE ++ fi ++ ++ if test -n "$inst_prefix_dir"; then ++ # Stick the inst_prefix_dir data into the link command. ++ relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%-inst-prefix-dir $inst_prefix_dir%"` ++ else ++ relink_command=`$echo "$relink_command" | $SED "s%@inst_prefix_dir@%%"` ++ fi + + $echo "$modename: warning: relinking \`$file'" 1>&2 + $show "$relink_command" + if $run eval "$relink_command"; then : + else + $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + fi + +@@ -4301,25 +5966,38 @@ + $run eval "$striplib $destdir/$realname" || exit $? + fi + +- if test $# -gt 0; then ++ if test "$#" -gt 0; then + # Delete the old symlinks, and create new ones. ++ # Try `ln -sf' first, because the `ln' binary might depend on ++ # the symlink we replace! Solaris /bin/ln does not understand -f, ++ # so we also need to try rm && ln -s. + for linkname + do + if test "$linkname" != "$realname"; then +- $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" +- $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" ++ $show "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" ++ $run eval "(cd $destdir && { $LN_S -f $realname $linkname || { $rm $linkname && $LN_S $realname $linkname; }; })" + fi + done + fi + + # Do each command in the postinstall commands. + lib="$destdir/$realname" +- eval cmds=\"$postinstall_cmds\" ++ cmds=$postinstall_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" ++ eval cmd=\"$cmd\" + $show "$cmd" +- $run eval "$cmd" || exit $? ++ $run eval "$cmd" || { ++ lt_exit=$? ++ ++ # Restore the uninstalled library and exit ++ if test "$mode" = relink; then ++ $run eval '(cd $output_objdir && $rm ${realname}T && $mv ${realname}U $realname)' ++ fi ++ ++ exit $lt_exit ++ } + done + IFS="$save_ifs" + fi +@@ -4357,7 +6035,7 @@ + *) + $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + esac + +@@ -4375,7 +6053,7 @@ + $show "$install_prog $staticobj $staticdest" + $run eval "$install_prog \$staticobj \$staticdest" || exit $? + fi +- exit 0 ++ exit $EXIT_SUCCESS + ;; + + *) +@@ -4387,29 +6065,47 @@ + destfile="$destdir/$destfile" + fi + ++ # If the file is missing, and there is a .exe on the end, strip it ++ # because it is most likely a libtool script we actually want to ++ # install ++ stripped_ext="" ++ case $file in ++ *.exe) ++ if test ! -f "$file"; then ++ file=`$echo $file|${SED} 's,.exe$,,'` ++ stripped_ext=".exe" ++ fi ++ ;; ++ esac ++ + # Do a test to see if this is really a libtool program. + case $host in + *cygwin*|*mingw*) +- wrapper=`echo $file | ${SED} -e 's,.exe$,,'` ++ wrapper=`$echo $file | ${SED} -e 's,.exe$,,'` + ;; + *) + wrapper=$file + ;; + esac +- if (${SED} -e '4q' $wrapper | egrep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then ++ if (${SED} -e '4q' $wrapper | grep "^# Generated by .*$PACKAGE")>/dev/null 2>&1; then + notinst_deplibs= + relink_command= + ++ # Note that it is not necessary on cygwin/mingw to append a dot to ++ # foo even if both foo and FILE.exe exist: automatic-append-.exe ++ # behavior happens only for exec(3), not for open(2)! Also, sourcing ++ # `FILE.' does not work on cygwin managed mounts. ++ # + # If there is no directory component, then add one. +- case $file in +- */* | *\\*) . $wrapper ;; +- *) . ./$wrapper ;; ++ case $wrapper in ++ */* | *\\*) . ${wrapper} ;; ++ *) . ./${wrapper} ;; + esac + + # Check the variables that should have been set. + if test -z "$notinst_deplibs"; then + $echo "$modename: invalid libtool wrapper script \`$wrapper'" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + finalize=yes +@@ -4431,24 +6127,22 @@ + done + + relink_command= ++ # Note that it is not necessary on cygwin/mingw to append a dot to ++ # foo even if both foo and FILE.exe exist: automatic-append-.exe ++ # behavior happens only for exec(3), not for open(2)! Also, sourcing ++ # `FILE.' does not work on cygwin managed mounts. ++ # + # If there is no directory component, then add one. +- case $file in +- */* | *\\*) . $wrapper ;; +- *) . ./$wrapper ;; ++ case $wrapper in ++ */* | *\\*) . ${wrapper} ;; ++ *) . ./${wrapper} ;; + esac + + outputname= + if test "$fast_install" = no && test -n "$relink_command"; then + if test "$finalize" = yes && test -z "$run"; then +- tmpdir="/tmp" +- test -n "$TMPDIR" && tmpdir="$TMPDIR" +- tmpdir="$tmpdir/libtool-$$" +- if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then : +- else +- $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 +- continue +- fi +- file=`$echo "X$file" | $Xsed -e 's%^.*/%%'` ++ tmpdir=`func_mktempdir` ++ file=`$echo "X$file$stripped_ext" | $Xsed -e 's%^.*/%%'` + outputname="$tmpdir/$file" + # Replace the output file specification. + relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` +@@ -4466,14 +6160,14 @@ + fi + else + # Install the binary that we compiled earlier. +- file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` ++ file=`$echo "X$file$stripped_ext" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` + fi + fi + + # remove .exe since cygwin /usr/bin/install will append another +- # one anyways ++ # one anyway + case $install_prog,$host in +- /usr/bin/install*,*cygwin*) ++ */usr/bin/install*,*cygwin*) + case $file:$destfile in + *.exe:*.exe) + # this is ok +@@ -4482,7 +6176,7 @@ + destfile=$destfile.exe + ;; + *:*.exe) +- destfile=`echo $destfile | ${SED} -e 's,.exe$,,'` ++ destfile=`$echo $destfile | ${SED} -e 's,.exe$,,'` + ;; + esac + ;; +@@ -4503,16 +6197,17 @@ + $show "$install_prog $file $oldlib" + $run eval "$install_prog \$file \$oldlib" || exit $? + +- if test -n "$stripme" && test -n "$striplib"; then ++ if test -n "$stripme" && test -n "$old_striplib"; then + $show "$old_striplib $oldlib" + $run eval "$old_striplib $oldlib" || exit $? + fi + + # Do each command in the postinstall commands. +- eval cmds=\"$old_postinstall_cmds\" ++ cmds=$old_postinstall_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" ++ eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || exit $? + done +@@ -4526,9 +6221,9 @@ + if test -n "$current_libdirs"; then + # Maybe just do a dry run. + test -n "$run" && current_libdirs=" -n$current_libdirs" +- exec_cmd='$SHELL $0 --finish$current_libdirs' ++ exec_cmd='$SHELL $progpath $preserve_args --finish$current_libdirs' + else +- exit 0 ++ exit $EXIT_SUCCESS + fi + ;; + +@@ -4547,10 +6242,11 @@ + for libdir in $libdirs; do + if test -n "$finish_cmds"; then + # Do each command in the finish commands. +- eval cmds=\"$finish_cmds\" ++ cmds=$finish_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" ++ eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" || admincmds="$admincmds + $cmd" +@@ -4567,43 +6263,43 @@ + fi + + # Exit here if they wanted silent mode. +- test "$show" = ":" && exit 0 ++ test "$show" = : && exit $EXIT_SUCCESS + +- echo "----------------------------------------------------------------------" +- echo "Libraries have been installed in:" ++ $echo "X----------------------------------------------------------------------" | $Xsed ++ $echo "Libraries have been installed in:" + for libdir in $libdirs; do +- echo " $libdir" ++ $echo " $libdir" + done +- echo +- echo "If you ever happen to want to link against installed libraries" +- echo "in a given directory, LIBDIR, you must either use libtool, and" +- echo "specify the full pathname of the library, or use the \`-LLIBDIR'" +- echo "flag during linking and do at least one of the following:" ++ $echo ++ $echo "If you ever happen to want to link against installed libraries" ++ $echo "in a given directory, LIBDIR, you must either use libtool, and" ++ $echo "specify the full pathname of the library, or use the \`-LLIBDIR'" ++ $echo "flag during linking and do at least one of the following:" + if test -n "$shlibpath_var"; then +- echo " - add LIBDIR to the \`$shlibpath_var' environment variable" +- echo " during execution" ++ $echo " - add LIBDIR to the \`$shlibpath_var' environment variable" ++ $echo " during execution" + fi + if test -n "$runpath_var"; then +- echo " - add LIBDIR to the \`$runpath_var' environment variable" +- echo " during linking" ++ $echo " - add LIBDIR to the \`$runpath_var' environment variable" ++ $echo " during linking" + fi + if test -n "$hardcode_libdir_flag_spec"; then + libdir=LIBDIR + eval flag=\"$hardcode_libdir_flag_spec\" + +- echo " - use the \`$flag' linker flag" ++ $echo " - use the \`$flag' linker flag" + fi + if test -n "$admincmds"; then +- echo " - have your system administrator run these commands:$admincmds" ++ $echo " - have your system administrator run these commands:$admincmds" + fi + if test -f /etc/ld.so.conf; then +- echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" ++ $echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" + fi +- echo +- echo "See any operating system documentation about shared libraries for" +- echo "more information, such as the ld(1) and ld.so(8) manual pages." +- echo "----------------------------------------------------------------------" +- exit 0 ++ $echo ++ $echo "See any operating system documentation about shared libraries for" ++ $echo "more information, such as the ld(1) and ld.so(8) manual pages." ++ $echo "X----------------------------------------------------------------------" | $Xsed ++ exit $EXIT_SUCCESS + ;; + + # libtool execute mode +@@ -4615,7 +6311,7 @@ + if test -z "$cmd"; then + $echo "$modename: you must specify a COMMAND" 1>&2 + $echo "$help" +- exit 1 ++ exit $EXIT_FAILURE + fi + + # Handle -dlopen flags immediately. +@@ -4623,18 +6319,18 @@ + if test ! -f "$file"; then + $echo "$modename: \`$file' is not a file" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + dir= + case $file in + *.la) + # Check to see that this really is a libtool archive. +- if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : ++ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : + else + $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + # Read the libtool library. +@@ -4661,7 +6357,7 @@ + dir="$dir/$objdir" + else + $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + ;; + +@@ -4701,7 +6397,7 @@ + -*) ;; + *) + # Do a test to see if this is really a libtool program. +- if (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then ++ if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + # If there is no directory component, then add one. + case $file in + */* | *\\*) . $file ;; +@@ -4724,7 +6420,7 @@ + eval "export $shlibpath_var" + fi + +- # Restore saved enviroment variables ++ # Restore saved environment variables + if test "${save_LC_ALL+set}" = set; then + LC_ALL="$save_LC_ALL"; export LC_ALL + fi +@@ -4741,7 +6437,7 @@ + $echo "export $shlibpath_var" + fi + $echo "$cmd$args" +- exit 0 ++ exit $EXIT_SUCCESS + fi + ;; + +@@ -4769,24 +6465,25 @@ + if test -z "$rm"; then + $echo "$modename: you must specify an RM program" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + + rmdirs= + ++ origobjdir="$objdir" + for file in $files; do + dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` + if test "X$dir" = "X$file"; then + dir=. +- objdir="$objdir" ++ objdir="$origobjdir" + else +- objdir="$dir/$objdir" ++ objdir="$dir/$origobjdir" + fi + name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` +- test $mode = uninstall && objdir="$dir" ++ test "$mode" = uninstall && objdir="$dir" + + # Remember objdir for removal later, being careful to avoid duplicates +- if test $mode = clean; then ++ if test "$mode" = clean; then + case " $rmdirs " in + *" $objdir "*) ;; + *) rmdirs="$rmdirs $objdir" ;; +@@ -4810,7 +6507,7 @@ + case $name in + *.la) + # Possibly a libtool archive, so verify it. +- if (${SED} -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then ++ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then + . $dir/$name + + # Delete the libtool libraries and symlinks. +@@ -4818,18 +6515,27 @@ + rmfiles="$rmfiles $objdir/$n" + done + test -n "$old_library" && rmfiles="$rmfiles $objdir/$old_library" +- test $mode = clean && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" + +- if test $mode = uninstall; then ++ case "$mode" in ++ clean) ++ case " $library_names " in ++ # " " in the beginning catches empty $dlname ++ *" $dlname "*) ;; ++ *) rmfiles="$rmfiles $objdir/$dlname" ;; ++ esac ++ test -n "$libdir" && rmfiles="$rmfiles $objdir/$name $objdir/${name}i" ++ ;; ++ uninstall) + if test -n "$library_names"; then + # Do each command in the postuninstall commands. +- eval cmds=\"$postuninstall_cmds\" ++ cmds=$postuninstall_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" ++ eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" +- if test $? != 0 && test "$rmforce" != yes; then ++ if test "$?" -ne 0 && test "$rmforce" != yes; then + exit_status=1 + fi + done +@@ -4838,40 +6544,72 @@ + + if test -n "$old_library"; then + # Do each command in the old_postuninstall commands. +- eval cmds=\"$old_postuninstall_cmds\" ++ cmds=$old_postuninstall_cmds + save_ifs="$IFS"; IFS='~' + for cmd in $cmds; do + IFS="$save_ifs" ++ eval cmd=\"$cmd\" + $show "$cmd" + $run eval "$cmd" +- if test $? != 0 && test "$rmforce" != yes; then ++ if test "$?" -ne 0 && test "$rmforce" != yes; then + exit_status=1 + fi + done + IFS="$save_ifs" + fi + # FIXME: should reinstall the best remaining shared library. +- fi ++ ;; ++ esac + fi + ;; + + *.lo) +- if test "$build_old_libs" = yes; then +- oldobj=`$echo "X$name" | $Xsed -e "$lo2o"` +- rmfiles="$rmfiles $dir/$oldobj" ++ # Possibly a libtool object, so verify it. ++ if (${SED} -e '2q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then ++ ++ # Read the .lo file ++ . $dir/$name ++ ++ # Add PIC object to the list of files to remove. ++ if test -n "$pic_object" \ ++ && test "$pic_object" != none; then ++ rmfiles="$rmfiles $dir/$pic_object" ++ fi ++ ++ # Add non-PIC object to the list of files to remove. ++ if test -n "$non_pic_object" \ ++ && test "$non_pic_object" != none; then ++ rmfiles="$rmfiles $dir/$non_pic_object" ++ fi + fi + ;; + + *) +- # Do a test to see if this is a libtool program. +- if test $mode = clean && +- (${SED} -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then +- relink_command= +- . $dir/$file ++ if test "$mode" = clean ; then ++ noexename=$name ++ case $file in ++ *.exe) ++ file=`$echo $file|${SED} 's,.exe$,,'` ++ noexename=`$echo $name|${SED} 's,.exe$,,'` ++ # $file with .exe has already been added to rmfiles, ++ # add $file without .exe ++ rmfiles="$rmfiles $file" ++ ;; ++ esac ++ # Do a test to see if this is a libtool program. ++ if (${SED} -e '4q' $file | grep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then ++ relink_command= ++ . $dir/$noexename + +- rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" +- if test "$fast_install" = yes && test -n "$relink_command"; then +- rmfiles="$rmfiles $objdir/lt-$name" ++ # note $name still contains .exe if it was in $file originally ++ # as does the version of $file that was added into $rmfiles ++ rmfiles="$rmfiles $objdir/$name $objdir/${name}S.${objext}" ++ if test "$fast_install" = yes && test -n "$relink_command"; then ++ rmfiles="$rmfiles $objdir/lt-$name" ++ fi ++ if test "X$noexename" != "X$name" ; then ++ rmfiles="$rmfiles $objdir/lt-${noexename}.c" ++ fi + fi + fi + ;; +@@ -4879,6 +6617,7 @@ + $show "$rm $rmfiles" + $run $rm $rmfiles || exit_status=1 + done ++ objdir="$origobjdir" + + # Try to remove the ${objdir}s in the directories where we deleted files + for dir in $rmdirs; do +@@ -4894,20 +6633,20 @@ + "") + $echo "$modename: you must specify a MODE" 1>&2 + $echo "$generic_help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + esac + + if test -z "$exec_cmd"; then + $echo "$modename: invalid operation mode \`$mode'" 1>&2 + $echo "$generic_help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + fi + fi # test -z "$show_help" + + if test -n "$exec_cmd"; then + eval exec $exec_cmd +- exit 1 ++ exit $EXIT_FAILURE + fi + + # We need to display help for each of the modes. +@@ -4926,6 +6665,7 @@ + --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] + --quiet same as \`--silent' + --silent don't print informational messages ++ --tag=TAG use configuration variables from tag TAG + --version print version information + + MODE must be one of the following: +@@ -4939,8 +6679,10 @@ + uninstall remove libraries from an installed directory + + MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for +-a more detailed description of MODE." +- exit 0 ++a more detailed description of MODE. ++ ++Report bugs to ." ++ exit $EXIT_SUCCESS + ;; + + clean) +@@ -5051,6 +6793,9 @@ + -no-install link a not-installable executable + -no-undefined declare that a library does not refer to external symbols + -o OUTPUT-FILE create OUTPUT-FILE from the specified objects ++ -objectlist FILE Use a list of object files found in FILE to specify objects ++ -precious-files-regex REGEX ++ don't remove output files matching REGEX + -release RELEASE specify package release information + -rpath LIBDIR the created library will eventually be installed in LIBDIR + -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries +@@ -5092,14 +6837,33 @@ + *) + $echo "$modename: invalid operation mode \`$mode'" 1>&2 + $echo "$help" 1>&2 +- exit 1 ++ exit $EXIT_FAILURE + ;; + esac + +-echo ++$echo + $echo "Try \`$modename --help' for more information about other modes." + +-exit 0 ++exit $? ++ ++# The TAGs below are defined such that we never get into a situation ++# in which we disable both kinds of libraries. Given conflicting ++# choices, we go for a static library, that is the most portable, ++# since we can't tell whether shared libraries were disabled because ++# the user asked for that or because the platform doesn't support ++# them. This is particularly important on AIX, because we don't ++# support having both static and shared libraries enabled at the same ++# time on that platform, so we default to a shared-only configuration. ++# If a disable-shared tag is given, we'll fallback to a static-only ++# configuration. But we'll never go from static-only to shared-only. ++ ++# ### BEGIN LIBTOOL TAG CONFIG: disable-shared ++disable_libs=shared ++# ### END LIBTOOL TAG CONFIG: disable-shared ++ ++# ### BEGIN LIBTOOL TAG CONFIG: disable-static ++disable_libs=static ++# ### END LIBTOOL TAG CONFIG: disable-static + + # Local Variables: + # mode:shell-script +Index: linux-atm-2.4.1/m4/Makefile.in +=================================================================== +--- linux-atm-2.4.1.orig/m4/Makefile.in 2007-10-20 21:45:35.726868386 +0200 ++++ linux-atm-2.4.1/m4/Makefile.in 2007-10-20 21:45:44.303357132 +0200 +@@ -1,6 +1,8 @@ +-# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am ++# Makefile.in generated by automake 1.9.6 from Makefile.am. ++# @configure_input@ + +-# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. ++# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -10,195 +12,316 @@ + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + +- +-SHELL = @SHELL@ +- ++@SET_MAKE@ + srcdir = @srcdir@ + top_srcdir = @top_srcdir@ + VPATH = @srcdir@ +-prefix = @prefix@ +-exec_prefix = @exec_prefix@ +- +-bindir = @bindir@ +-sbindir = @sbindir@ +-libexecdir = @libexecdir@ +-datadir = @datadir@ +-sysconfdir = @sysconfdir@ +-sharedstatedir = @sharedstatedir@ +-localstatedir = @localstatedir@ +-libdir = @libdir@ +-infodir = @infodir@ +-mandir = @mandir@ +-includedir = @includedir@ +-oldincludedir = /usr/include +- +-DESTDIR = +- + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ +- + top_builddir = .. +- +-ACLOCAL = @ACLOCAL@ +-AUTOCONF = @AUTOCONF@ +-AUTOMAKE = @AUTOMAKE@ +-AUTOHEADER = @AUTOHEADER@ +- ++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + INSTALL = @INSTALL@ +-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +-INSTALL_DATA = @INSTALL_DATA@ +-INSTALL_SCRIPT = @INSTALL_SCRIPT@ +-transform = @program_transform_name@ +- ++install_sh_DATA = $(install_sh) -c -m 644 ++install_sh_PROGRAM = $(install_sh) -c ++install_sh_SCRIPT = $(install_sh) -c ++INSTALL_HEADER = $(INSTALL_DATA) ++transform = $(program_transform_name) + NORMAL_INSTALL = : + PRE_INSTALL = : + POST_INSTALL = : + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : +-build_alias = @build_alias@ + build_triplet = @build@ +-host_alias = @host_alias@ + host_triplet = @host@ +-target_alias = @target_alias@ + target_triplet = @target@ ++subdir = m4 ++DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 ++am__aclocal_m4_deps = $(top_srcdir)/configure.in ++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ ++ $(ACLOCAL_M4) ++mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs ++CONFIG_HEADER = $(top_builddir)/config.h ++CONFIG_CLEAN_FILES = ++SOURCES = ++DIST_SOURCES = ++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++ACLOCAL = @ACLOCAL@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ ++AMTAR = @AMTAR@ + AR = @AR@ +-AS = @AS@ ++AUTOCONF = @AUTOCONF@ ++AUTOHEADER = @AUTOHEADER@ ++AUTOMAKE = @AUTOMAKE@ ++AWK = @AWK@ + CC = @CC@ ++CCDEPMODE = @CCDEPMODE@ ++CFLAGS = @CFLAGS@ ++CPP = @CPP@ ++CPPFLAGS = @CPPFLAGS@ + CXX = @CXX@ + CXXCPP = @CXXCPP@ +-DLLTOOL = @DLLTOOL@ ++CXXDEPMODE = @CXXDEPMODE@ ++CXXFLAGS = @CXXFLAGS@ ++CYGPATH_W = @CYGPATH_W@ ++DEFS = @DEFS@ ++DEPDIR = @DEPDIR@ + ECHO = @ECHO@ ++ECHO_C = @ECHO_C@ ++ECHO_N = @ECHO_N@ ++ECHO_T = @ECHO_T@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ + F77 = @F77@ +-GCJ = @GCJ@ +-GCJFLAGS = @GCJFLAGS@ +-HAVE_LIB = @HAVE_LIB@ ++FFLAGS = @FFLAGS@ ++GREP = @GREP@ ++INSTALL_DATA = @INSTALL_DATA@ ++INSTALL_PROGRAM = @INSTALL_PROGRAM@ ++INSTALL_SCRIPT = @INSTALL_SCRIPT@ ++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ ++LDFLAGS = @LDFLAGS@ + LEX = @LEX@ +-LIB = @LIB@ ++LEXLIB = @LEXLIB@ ++LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ ++LIBOBJS = @LIBOBJS@ ++LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBTOOL_DEPS = @LIBTOOL_DEPS@ + LIBVER_AGE = @LIBVER_AGE@ + LIBVER_CURRENT = @LIBVER_CURRENT@ + LIBVER_REVISION = @LIBVER_REVISION@ + LN_S = @LN_S@ +-LTLIB = @LTLIB@ ++LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-OBJDUMP = @OBJDUMP@ + OBJEXT = @OBJEXT@ + PACKAGE = @PACKAGE@ ++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ ++PACKAGE_NAME = @PACKAGE_NAME@ ++PACKAGE_STRING = @PACKAGE_STRING@ ++PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_VERSION = @PACKAGE_VERSION@ ++PATH_SEPARATOR = @PATH_SEPARATOR@ + PERL = @PERL@ + RANLIB = @RANLIB@ +-RC = @RC@ ++SET_MAKE = @SET_MAKE@ ++SHELL = @SHELL@ + STRIP = @STRIP@ + VERSION = @VERSION@ + YACC = @YACC@ +-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +-CONFIG_HEADER = ../config.h +-CONFIG_CLEAN_FILES = +-DIST_COMMON = Makefile.am Makefile.in +- +- +-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) ++YFLAGS = @YFLAGS@ ++ac_ct_CC = @ac_ct_CC@ ++ac_ct_CXX = @ac_ct_CXX@ ++ac_ct_F77 = @ac_ct_F77@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ ++am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ ++am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ ++am__include = @am__include@ ++am__leading_dot = @am__leading_dot@ ++am__quote = @am__quote@ ++am__tar = @am__tar@ ++am__untar = @am__untar@ ++bindir = @bindir@ ++build = @build@ ++build_alias = @build_alias@ ++build_cpu = @build_cpu@ ++build_os = @build_os@ ++build_vendor = @build_vendor@ ++datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ ++exec_prefix = @exec_prefix@ ++host = @host@ ++host_alias = @host_alias@ ++host_cpu = @host_cpu@ ++host_os = @host_os@ ++host_vendor = @host_vendor@ ++htmldir = @htmldir@ ++includedir = @includedir@ ++infodir = @infodir@ ++install_sh = @install_sh@ ++libdir = @libdir@ ++libexecdir = @libexecdir@ ++localedir = @localedir@ ++localstatedir = @localstatedir@ ++mandir = @mandir@ ++mkdir_p = @mkdir_p@ ++oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ ++prefix = @prefix@ ++program_transform_name = @program_transform_name@ ++psdir = @psdir@ ++sbindir = @sbindir@ ++sharedstatedir = @sharedstatedir@ ++sysconfdir = @sysconfdir@ ++target = @target@ ++target_alias = @target_alias@ ++target_cpu = @target_cpu@ ++target_os = @target_os@ ++target_vendor = @target_vendor@ ++all: all-am + +-TAR = tar +-GZIP_ENV = --best +-all: all-redirect + .SUFFIXES: +-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) +- cd $(top_srcdir) && $(AUTOMAKE) --gnu m4/Makefile ++$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) ++ @for dep in $?; do \ ++ case '$(am__configure_deps)' in \ ++ *$$dep*) \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ ++ && exit 0; \ ++ exit 1;; \ ++ esac; \ ++ done; \ ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu m4/Makefile'; \ ++ cd $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu m4/Makefile ++.PRECIOUS: Makefile ++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ++ @case '$?' in \ ++ *config.status*) \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ ++ *) \ ++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ ++ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ ++ esac; ++ ++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++ ++$(top_srcdir)/configure: $(am__configure_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(ACLOCAL_M4): $(am__aclocal_m4_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) +- cd $(top_builddir) \ +- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status ++mostlyclean-libtool: ++ -rm -f *.lo + ++clean-libtool: ++ -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + tags: TAGS + TAGS: + ++ctags: CTAGS ++CTAGS: + +-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) +- +-subdir = m4 + + distdir: $(DISTFILES) +- here=`cd $(top_builddir) && pwd`; \ +- top_distdir=`cd $(top_distdir) && pwd`; \ +- distdir=`cd $(distdir) && pwd`; \ +- cd $(top_srcdir) \ +- && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu m4/Makefile +- @for file in $(DISTFILES); do \ +- d=$(srcdir); \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ ++ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- cp -pr $$d/$$file $(distdir)/$$file; \ ++ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ ++ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ fi; \ ++ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ +- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ +- || cp -p $$d/$$file $(distdir)/$$file || :; \ ++ || cp -p $$d/$$file $(distdir)/$$file \ ++ || exit 1; \ + fi; \ + done +-info-am: +-info: info-am +-dvi-am: +-dvi: dvi-am + check-am: all-am + check: check-am +-installcheck-am: +-installcheck: installcheck-am +-install-exec-am: ++all-am: Makefile ++installdirs: ++install: install-am + install-exec: install-exec-am +- +-install-data-am: + install-data: install-data-am ++uninstall: uninstall-am + + install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +-install: install-am +-uninstall-am: +-uninstall: uninstall-am +-all-am: Makefile +-all-redirect: all-am +-install-strip: +- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +-installdirs: +- + ++installcheck: installcheck-am ++install-strip: ++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ ++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ ++ `test -z '$(STRIP)' || \ ++ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + mostlyclean-generic: + + clean-generic: + + distclean-generic: +- -rm -f Makefile $(CONFIG_CLEAN_FILES) +- -rm -f config.cache config.log stamp-h stamp-h[0-9]* ++ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + + maintainer-clean-generic: +-mostlyclean-am: mostlyclean-generic ++ @echo "This command is intended for maintainers to use" ++ @echo "it deletes files that may require special tools to rebuild." ++clean: clean-am + +-mostlyclean: mostlyclean-am ++clean-am: clean-generic clean-libtool mostlyclean-am + +-clean-am: clean-generic mostlyclean-am ++distclean: distclean-am ++ -rm -f Makefile ++distclean-am: clean-am distclean-generic distclean-libtool + +-clean: clean-am ++dvi: dvi-am + +-distclean-am: distclean-generic clean-am +- -rm -f libtool ++dvi-am: + +-distclean: distclean-am ++html: html-am + +-maintainer-clean-am: maintainer-clean-generic distclean-am +- @echo "This command is intended for maintainers to use;" +- @echo "it deletes files that may require special tools to rebuild." ++info: info-am ++ ++info-am: ++ ++install-data-am: ++ ++install-exec-am: ++ ++install-info: install-info-am ++ ++install-man: ++ ++installcheck-am: + + maintainer-clean: maintainer-clean-am ++ -rm -f Makefile ++maintainer-clean-am: distclean-am maintainer-clean-generic ++ ++mostlyclean: mostlyclean-am ++ ++mostlyclean-am: mostlyclean-generic mostlyclean-libtool ++ ++pdf: pdf-am ++ ++pdf-am: ++ ++ps: ps-am ++ ++ps-am: + +-.PHONY: tags distdir info-am info dvi-am dvi check check-am \ +-installcheck-am installcheck install-exec-am install-exec \ +-install-data-am install-data install-am install uninstall-am uninstall \ +-all-redirect all-am all installdirs mostlyclean-generic \ +-distclean-generic clean-generic maintainer-clean-generic clean \ +-mostlyclean distclean maintainer-clean ++uninstall-am: uninstall-info-am + ++.PHONY: all all-am check check-am clean clean-generic clean-libtool \ ++ distclean distclean-generic distclean-libtool distdir dvi \ ++ dvi-am html html-am info info-am install install-am \ ++ install-data install-data-am install-exec install-exec-am \ ++ install-info install-info-am install-man install-strip \ ++ installcheck installcheck-am installdirs maintainer-clean \ ++ maintainer-clean-generic mostlyclean mostlyclean-generic \ ++ mostlyclean-libtool pdf pdf-am ps ps-am uninstall uninstall-am \ ++ uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +Index: linux-atm-2.4.1/Makefile.in +=================================================================== +--- linux-atm-2.4.1.orig/Makefile.in 2007-10-20 21:45:35.730868614 +0200 ++++ linux-atm-2.4.1/Makefile.in 2007-10-20 21:45:44.307357360 +0200 +@@ -1,6 +1,8 @@ +-# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am ++# Makefile.in generated by automake 1.9.6 from Makefile.am. ++# @configure_input@ + +-# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. ++# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -10,153 +12,248 @@ + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + +- +-SHELL = @SHELL@ +- ++@SET_MAKE@ + srcdir = @srcdir@ + top_srcdir = @top_srcdir@ + VPATH = @srcdir@ +-prefix = @prefix@ +-exec_prefix = @exec_prefix@ +- +-bindir = @bindir@ +-sbindir = @sbindir@ +-libexecdir = @libexecdir@ +-datadir = @datadir@ +-sysconfdir = @sysconfdir@ +-sharedstatedir = @sharedstatedir@ +-localstatedir = @localstatedir@ +-libdir = @libdir@ +-infodir = @infodir@ +-mandir = @mandir@ +-includedir = @includedir@ +-oldincludedir = /usr/include +- +-DESTDIR = +- + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ +- + top_builddir = . +- +-ACLOCAL = @ACLOCAL@ +-AUTOCONF = @AUTOCONF@ +-AUTOMAKE = @AUTOMAKE@ +-AUTOHEADER = @AUTOHEADER@ +- ++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + INSTALL = @INSTALL@ +-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +-INSTALL_DATA = @INSTALL_DATA@ +-INSTALL_SCRIPT = @INSTALL_SCRIPT@ +-transform = @program_transform_name@ +- ++install_sh_DATA = $(install_sh) -c -m 644 ++install_sh_PROGRAM = $(install_sh) -c ++install_sh_SCRIPT = $(install_sh) -c ++INSTALL_HEADER = $(INSTALL_DATA) ++transform = $(program_transform_name) + NORMAL_INSTALL = : + PRE_INSTALL = : + POST_INSTALL = : + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : +-build_alias = @build_alias@ + build_triplet = @build@ +-host_alias = @host_alias@ + host_triplet = @host@ +-target_alias = @target_alias@ + target_triplet = @target@ ++DIST_COMMON = README $(am__configure_deps) $(srcdir)/Makefile.am \ ++ $(srcdir)/Makefile.in $(srcdir)/config.h.in \ ++ $(top_srcdir)/configure AUTHORS COPYING ChangeLog INSTALL NEWS \ ++ THANKS acconfig.h config.guess config.sub depcomp install-sh \ ++ ltmain.sh missing mkinstalldirs ++subdir = . ++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 ++am__aclocal_m4_deps = $(top_srcdir)/configure.in ++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ ++ $(ACLOCAL_M4) ++am__CONFIG_DISTCLEAN_FILES = config.status config.cache config.log \ ++ configure.lineno configure.status.lineno ++mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs ++CONFIG_HEADER = config.h ++CONFIG_CLEAN_FILES = ++SOURCES = ++DIST_SOURCES = ++RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ ++ html-recursive info-recursive install-data-recursive \ ++ install-exec-recursive install-info-recursive \ ++ install-recursive installcheck-recursive installdirs-recursive \ ++ pdf-recursive ps-recursive uninstall-info-recursive \ ++ uninstall-recursive ++ETAGS = etags ++CTAGS = ctags ++DIST_SUBDIRS = $(SUBDIRS) ++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++distdir = $(PACKAGE)-$(VERSION) ++top_distdir = $(distdir) ++am__remove_distdir = \ ++ { test ! -d $(distdir) \ ++ || { find $(distdir) -type d ! -perm -200 -exec chmod u+w {} ';' \ ++ && rm -fr $(distdir); }; } ++DIST_ARCHIVES = $(distdir).tar.gz ++GZIP_ENV = --best ++distuninstallcheck_listfiles = find . -type f -print ++distcleancheck_listfiles = find . -type f -print ++ACLOCAL = @ACLOCAL@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ ++AMTAR = @AMTAR@ + AR = @AR@ +-AS = @AS@ ++AUTOCONF = @AUTOCONF@ ++AUTOHEADER = @AUTOHEADER@ ++AUTOMAKE = @AUTOMAKE@ ++AWK = @AWK@ + CC = @CC@ ++CCDEPMODE = @CCDEPMODE@ ++CFLAGS = @CFLAGS@ ++CPP = @CPP@ ++CPPFLAGS = @CPPFLAGS@ + CXX = @CXX@ + CXXCPP = @CXXCPP@ +-DLLTOOL = @DLLTOOL@ ++CXXDEPMODE = @CXXDEPMODE@ ++CXXFLAGS = @CXXFLAGS@ ++CYGPATH_W = @CYGPATH_W@ ++DEFS = @DEFS@ ++DEPDIR = @DEPDIR@ + ECHO = @ECHO@ ++ECHO_C = @ECHO_C@ ++ECHO_N = @ECHO_N@ ++ECHO_T = @ECHO_T@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ + F77 = @F77@ +-GCJ = @GCJ@ +-GCJFLAGS = @GCJFLAGS@ +-HAVE_LIB = @HAVE_LIB@ ++FFLAGS = @FFLAGS@ ++GREP = @GREP@ ++INSTALL_DATA = @INSTALL_DATA@ ++INSTALL_PROGRAM = @INSTALL_PROGRAM@ ++INSTALL_SCRIPT = @INSTALL_SCRIPT@ ++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ ++LDFLAGS = @LDFLAGS@ + LEX = @LEX@ +-LIB = @LIB@ ++LEXLIB = @LEXLIB@ ++LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ ++LIBOBJS = @LIBOBJS@ ++LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBTOOL_DEPS = @LIBTOOL_DEPS@ + LIBVER_AGE = @LIBVER_AGE@ + LIBVER_CURRENT = @LIBVER_CURRENT@ + LIBVER_REVISION = @LIBVER_REVISION@ + LN_S = @LN_S@ +-LTLIB = @LTLIB@ ++LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-OBJDUMP = @OBJDUMP@ + OBJEXT = @OBJEXT@ + PACKAGE = @PACKAGE@ ++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ ++PACKAGE_NAME = @PACKAGE_NAME@ ++PACKAGE_STRING = @PACKAGE_STRING@ ++PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_VERSION = @PACKAGE_VERSION@ ++PATH_SEPARATOR = @PATH_SEPARATOR@ + PERL = @PERL@ + RANLIB = @RANLIB@ +-RC = @RC@ ++SET_MAKE = @SET_MAKE@ ++SHELL = @SHELL@ + STRIP = @STRIP@ + VERSION = @VERSION@ + YACC = @YACC@ +- ++YFLAGS = @YFLAGS@ ++ac_ct_CC = @ac_ct_CC@ ++ac_ct_CXX = @ac_ct_CXX@ ++ac_ct_F77 = @ac_ct_F77@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ ++am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ ++am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ ++am__include = @am__include@ ++am__leading_dot = @am__leading_dot@ ++am__quote = @am__quote@ ++am__tar = @am__tar@ ++am__untar = @am__untar@ ++bindir = @bindir@ ++build = @build@ ++build_alias = @build_alias@ ++build_cpu = @build_cpu@ ++build_os = @build_os@ ++build_vendor = @build_vendor@ ++datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ ++exec_prefix = @exec_prefix@ ++host = @host@ ++host_alias = @host_alias@ ++host_cpu = @host_cpu@ ++host_os = @host_os@ ++host_vendor = @host_vendor@ ++htmldir = @htmldir@ ++includedir = @includedir@ ++infodir = @infodir@ ++install_sh = @install_sh@ ++libdir = @libdir@ ++libexecdir = @libexecdir@ ++localedir = @localedir@ ++localstatedir = @localstatedir@ ++mandir = @mandir@ ++mkdir_p = @mkdir_p@ ++oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ ++prefix = @prefix@ ++program_transform_name = @program_transform_name@ ++psdir = @psdir@ ++sbindir = @sbindir@ ++sharedstatedir = @sharedstatedir@ ++sysconfdir = @sysconfdir@ ++target = @target@ ++target_alias = @target_alias@ ++target_cpu = @target_cpu@ ++target_os = @target_os@ ++target_vendor = @target_vendor@ + SUBDIRS = m4 src doc +- + EXTRA_DIST = COPYING.GPL COPYING.LGPL BUGS +-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 +-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +-CONFIG_HEADER = config.h +-CONFIG_CLEAN_FILES = +-DIST_COMMON = README ./stamp-h.in AUTHORS COPYING ChangeLog INSTALL \ +-Makefile.am Makefile.in NEWS THANKS acconfig.h aclocal.m4 config.guess \ +-config.h.in config.sub configure configure.in install-sh ltmain.sh \ +-missing mkinstalldirs +- +- +-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) ++all: config.h ++ $(MAKE) $(AM_MAKEFLAGS) all-recursive + +-TAR = tar +-GZIP_ENV = --best +-all: all-redirect + .SUFFIXES: +-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) +- cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile +- +-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) +- cd $(top_builddir) \ +- && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status +- +-$(ACLOCAL_M4): configure.in +- cd $(srcdir) && $(ACLOCAL) ++am--refresh: ++ @: ++$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) ++ @for dep in $?; do \ ++ case '$(am__configure_deps)' in \ ++ *$$dep*) \ ++ echo ' cd $(srcdir) && $(AUTOMAKE) --gnu '; \ ++ cd $(srcdir) && $(AUTOMAKE) --gnu \ ++ && exit 0; \ ++ exit 1;; \ ++ esac; \ ++ done; \ ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu Makefile'; \ ++ cd $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu Makefile ++.PRECIOUS: Makefile ++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ++ @case '$?' in \ ++ *config.status*) \ ++ echo ' $(SHELL) ./config.status'; \ ++ $(SHELL) ./config.status;; \ ++ *) \ ++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe)'; \ ++ cd $(top_builddir) && $(SHELL) ./config.status $@ $(am__depfiles_maybe);; \ ++ esac; + +-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) ++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) + $(SHELL) ./config.status --recheck +-$(srcdir)/configure: $(srcdir)/configure.in $(ACLOCAL_M4) $(CONFIGURE_DEPENDENCIES) ++ ++$(top_srcdir)/configure: $(am__configure_deps) + cd $(srcdir) && $(AUTOCONF) ++$(ACLOCAL_M4): $(am__aclocal_m4_deps) ++ cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS) + +-config.h: stamp-h ++config.h: stamp-h1 + @if test ! -f $@; then \ +- rm -f stamp-h; \ +- $(MAKE) stamp-h; \ ++ rm -f stamp-h1; \ ++ $(MAKE) stamp-h1; \ + else :; fi +-stamp-h: $(srcdir)/config.h.in $(top_builddir)/config.status +- cd $(top_builddir) \ +- && CONFIG_FILES= CONFIG_HEADERS=config.h \ +- $(SHELL) ./config.status +- @echo timestamp > stamp-h 2> /dev/null +-$(srcdir)/config.h.in: $(srcdir)/stamp-h.in +- @if test ! -f $@; then \ +- rm -f $(srcdir)/stamp-h.in; \ +- $(MAKE) $(srcdir)/stamp-h.in; \ +- else :; fi +-$(srcdir)/stamp-h.in: $(top_srcdir)/configure.in $(ACLOCAL_M4) acconfig.h ++ ++stamp-h1: $(srcdir)/config.h.in $(top_builddir)/config.status ++ @rm -f stamp-h1 ++ cd $(top_builddir) && $(SHELL) ./config.status config.h ++$(srcdir)/config.h.in: $(am__configure_deps) $(top_srcdir)/acconfig.h + cd $(top_srcdir) && $(AUTOHEADER) +- @echo timestamp > $(srcdir)/stamp-h.in 2> /dev/null ++ rm -f stamp-h1 ++ touch $@ + +-mostlyclean-hdr: ++distclean-hdr: ++ -rm -f config.h stamp-h1 + +-clean-hdr: ++mostlyclean-libtool: ++ -rm -f *.lo + +-distclean-hdr: +- -rm -f config.h ++clean-libtool: ++ -rm -rf .libs _libs + +-maintainer-clean-hdr: ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. +@@ -164,13 +261,14 @@ + # (1) if the variable is set in `config.status', edit `config.status' + # (which will cause the Makefiles to be regenerated when you run `make'); + # (2) otherwise, pass the desired values on the `make' command line. +- +-@SET_MAKE@ +- +-all-recursive install-data-recursive install-exec-recursive \ +-installdirs-recursive install-recursive uninstall-recursive \ +-check-recursive installcheck-recursive info-recursive dvi-recursive: +- @set fnord $(MAKEFLAGS); amf=$$2; \ ++$(RECURSIVE_TARGETS): ++ @failcom='exit 1'; \ ++ for f in x $$MAKEFLAGS; do \ ++ case $$f in \ ++ *=* | --[!k]*);; \ ++ *k*) failcom='fail=yes';; \ ++ esac; \ ++ done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ +@@ -182,7 +280,7 @@ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ +- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ ++ || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ +@@ -190,13 +288,24 @@ + + mostlyclean-recursive clean-recursive distclean-recursive \ + maintainer-clean-recursive: +- @set fnord $(MAKEFLAGS); amf=$$2; \ ++ @failcom='exit 1'; \ ++ for f in x $$MAKEFLAGS; do \ ++ case $$f in \ ++ *=* | --[!k]*);; \ ++ *k*) failcom='fail=yes';; \ ++ esac; \ ++ done; \ + dot_seen=no; \ +- rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ +- rev="$$subdir $$rev"; \ +- test "$$subdir" != "." || dot_seen=yes; \ ++ case "$@" in \ ++ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ ++ *) list='$(SUBDIRS)' ;; \ ++ esac; \ ++ rev=''; for subdir in $$list; do \ ++ if test "$$subdir" = "."; then :; else \ ++ rev="$$subdir $$rev"; \ ++ fi; \ + done; \ +- test "$$dot_seen" = "no" && rev=". $$rev"; \ ++ rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ +@@ -206,183 +315,314 @@ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ +- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ ++ || eval $$failcom; \ + done && test -z "$$fail" + tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done ++ctags-recursive: ++ list='$(SUBDIRS)'; for subdir in $$list; do \ ++ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ ++ done + +-tags: TAGS +- +-ID: $(HEADERS) $(SOURCES) $(LISP) +- list='$(SOURCES) $(HEADERS)'; \ +- unique=`for i in $$list; do echo $$i; done | \ +- awk ' { files[$$0] = 1; } \ ++ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) ++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | \ ++ $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ +- here=`pwd` && cd $(srcdir) \ +- && mkid -f$$here/ID $$unique $(LISP) ++ mkid -fID $$unique ++tags: TAGS + +-TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) $(LISP) ++TAGS: tags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ ++ $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ ++ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ ++ include_option=--etags-include; \ ++ empty_fix=.; \ ++ else \ ++ include_option=--include; \ ++ empty_fix=; \ ++ fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ +- if test "$$subdir" = .; then :; else \ +- test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ +- fi; \ ++ if test "$$subdir" = .; then :; else \ ++ test ! -f $$subdir/TAGS || \ ++ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ ++ fi; \ + done; \ +- list='$(SOURCES) $(HEADERS)'; \ +- unique=`for i in $$list; do echo $$i; done | \ +- awk ' { files[$$0] = 1; } \ ++ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | \ ++ $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ +- test -z "$(ETAGS_ARGS)config.h.in$$unique$(LISP)$$tags" \ +- || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags config.h.in $$unique $(LISP)) +- +-mostlyclean-tags: +- +-clean-tags: ++ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ test -n "$$unique" || unique=$$empty_fix; \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$tags $$unique; \ ++ fi ++ctags: CTAGS ++CTAGS: ctags-recursive $(HEADERS) $(SOURCES) config.h.in $(TAGS_DEPENDENCIES) \ ++ $(TAGS_FILES) $(LISP) ++ tags=; \ ++ here=`pwd`; \ ++ list='$(SOURCES) $(HEADERS) config.h.in $(LISP) $(TAGS_FILES)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ ++ test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ ++ $$tags $$unique ++ ++GTAGS: ++ here=`$(am__cd) $(top_builddir) && pwd` \ ++ && cd $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) $$here + + distclean-tags: +- -rm -f TAGS ID +- +-maintainer-clean-tags: ++ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + +-distdir = $(PACKAGE)-$(VERSION) +-top_distdir = $(distdir) +- +-# This target untars the dist file and tries a VPATH configuration. Then +-# it guarantees that the distribution is self-contained by making another +-# tarfile. +-distcheck: dist +- -rm -rf $(distdir) +- GZIP=$(GZIP_ENV) $(TAR) zxf $(distdir).tar.gz +- mkdir $(distdir)/=build +- mkdir $(distdir)/=inst +- dc_install_base=`cd $(distdir)/=inst && pwd`; \ +- cd $(distdir)/=build \ +- && ../configure --srcdir=.. --prefix=$$dc_install_base \ +- && $(MAKE) $(AM_MAKEFLAGS) \ +- && $(MAKE) $(AM_MAKEFLAGS) dvi \ +- && $(MAKE) $(AM_MAKEFLAGS) check \ +- && $(MAKE) $(AM_MAKEFLAGS) install \ +- && $(MAKE) $(AM_MAKEFLAGS) installcheck \ +- && $(MAKE) $(AM_MAKEFLAGS) dist +- -rm -rf $(distdir) +- @banner="$(distdir).tar.gz is ready for distribution"; \ +- dashes=`echo "$$banner" | sed s/./=/g`; \ +- echo "$$dashes"; \ +- echo "$$banner"; \ +- echo "$$dashes" +-dist: distdir +- -chmod -R a+r $(distdir) +- GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) +- -rm -rf $(distdir) +-dist-all: distdir +- -chmod -R a+r $(distdir) +- GZIP=$(GZIP_ENV) $(TAR) chozf $(distdir).tar.gz $(distdir) +- -rm -rf $(distdir) + distdir: $(DISTFILES) +- -rm -rf $(distdir) ++ $(am__remove_distdir) + mkdir $(distdir) +- -chmod 777 $(distdir) +- here=`cd $(top_builddir) && pwd`; \ +- top_distdir=`cd $(distdir) && pwd`; \ +- distdir=`cd $(distdir) && pwd`; \ +- cd $(top_srcdir) \ +- && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu Makefile +- @for file in $(DISTFILES); do \ +- d=$(srcdir); \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ ++ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- cp -pr $$d/$$file $(distdir)/$$file; \ ++ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ ++ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ fi; \ ++ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ +- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ +- || cp -p $$d/$$file $(distdir)/$$file || :; \ ++ || cp -p $$d/$$file $(distdir)/$$file \ ++ || exit 1; \ + fi; \ + done +- for subdir in $(SUBDIRS); do \ ++ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ +- test -d $(distdir)/$$subdir \ +- || mkdir $(distdir)/$$subdir \ ++ test -d "$(distdir)/$$subdir" \ ++ || $(mkdir_p) "$(distdir)/$$subdir" \ + || exit 1; \ +- chmod 777 $(distdir)/$$subdir; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(distdir) distdir=../$(distdir)/$$subdir distdir) \ ++ distdir=`$(am__cd) $(distdir) && pwd`; \ ++ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ ++ (cd $$subdir && \ ++ $(MAKE) $(AM_MAKEFLAGS) \ ++ top_distdir="$$top_distdir" \ ++ distdir="$$distdir/$$subdir" \ ++ distdir) \ + || exit 1; \ + fi; \ + done +-info-am: +-info: info-recursive +-dvi-am: +-dvi: dvi-recursive ++ -find $(distdir) -type d ! -perm -777 -exec chmod a+rwx {} \; -o \ ++ ! -type d ! -perm -444 -links 1 -exec chmod a+r {} \; -o \ ++ ! -type d ! -perm -400 -exec chmod a+r {} \; -o \ ++ ! -type d ! -perm -444 -exec $(SHELL) $(install_sh) -c -m a+r {} {} \; \ ++ || chmod -R a+r $(distdir) ++dist-gzip: distdir ++ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz ++ $(am__remove_distdir) ++ ++dist-bzip2: distdir ++ tardir=$(distdir) && $(am__tar) | bzip2 -9 -c >$(distdir).tar.bz2 ++ $(am__remove_distdir) ++ ++dist-tarZ: distdir ++ tardir=$(distdir) && $(am__tar) | compress -c >$(distdir).tar.Z ++ $(am__remove_distdir) ++ ++dist-shar: distdir ++ shar $(distdir) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).shar.gz ++ $(am__remove_distdir) ++ ++dist-zip: distdir ++ -rm -f $(distdir).zip ++ zip -rq $(distdir).zip $(distdir) ++ $(am__remove_distdir) ++ ++dist dist-all: distdir ++ tardir=$(distdir) && $(am__tar) | GZIP=$(GZIP_ENV) gzip -c >$(distdir).tar.gz ++ $(am__remove_distdir) ++ ++# This target untars the dist file and tries a VPATH configuration. Then ++# it guarantees that the distribution is self-contained by making another ++# tarfile. ++distcheck: dist ++ case '$(DIST_ARCHIVES)' in \ ++ *.tar.gz*) \ ++ GZIP=$(GZIP_ENV) gunzip -c $(distdir).tar.gz | $(am__untar) ;;\ ++ *.tar.bz2*) \ ++ bunzip2 -c $(distdir).tar.bz2 | $(am__untar) ;;\ ++ *.tar.Z*) \ ++ uncompress -c $(distdir).tar.Z | $(am__untar) ;;\ ++ *.shar.gz*) \ ++ GZIP=$(GZIP_ENV) gunzip -c $(distdir).shar.gz | unshar ;;\ ++ *.zip*) \ ++ unzip $(distdir).zip ;;\ ++ esac ++ chmod -R a-w $(distdir); chmod a+w $(distdir) ++ mkdir $(distdir)/_build ++ mkdir $(distdir)/_inst ++ chmod a-w $(distdir) ++ dc_install_base=`$(am__cd) $(distdir)/_inst && pwd | sed -e 's,^[^:\\/]:[\\/],/,'` \ ++ && dc_destdir="$${TMPDIR-/tmp}/am-dc-$$$$/" \ ++ && cd $(distdir)/_build \ ++ && ../configure --srcdir=.. --prefix="$$dc_install_base" \ ++ $(DISTCHECK_CONFIGURE_FLAGS) \ ++ && $(MAKE) $(AM_MAKEFLAGS) \ ++ && $(MAKE) $(AM_MAKEFLAGS) dvi \ ++ && $(MAKE) $(AM_MAKEFLAGS) check \ ++ && $(MAKE) $(AM_MAKEFLAGS) install \ ++ && $(MAKE) $(AM_MAKEFLAGS) installcheck \ ++ && $(MAKE) $(AM_MAKEFLAGS) uninstall \ ++ && $(MAKE) $(AM_MAKEFLAGS) distuninstallcheck_dir="$$dc_install_base" \ ++ distuninstallcheck \ ++ && chmod -R a-w "$$dc_install_base" \ ++ && ({ \ ++ (cd ../.. && umask 077 && mkdir "$$dc_destdir") \ ++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" install \ ++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" uninstall \ ++ && $(MAKE) $(AM_MAKEFLAGS) DESTDIR="$$dc_destdir" \ ++ distuninstallcheck_dir="$$dc_destdir" distuninstallcheck; \ ++ } || { rm -rf "$$dc_destdir"; exit 1; }) \ ++ && rm -rf "$$dc_destdir" \ ++ && $(MAKE) $(AM_MAKEFLAGS) dist \ ++ && rm -rf $(DIST_ARCHIVES) \ ++ && $(MAKE) $(AM_MAKEFLAGS) distcleancheck ++ $(am__remove_distdir) ++ @(echo "$(distdir) archives ready for distribution: "; \ ++ list='$(DIST_ARCHIVES)'; for i in $$list; do echo $$i; done) | \ ++ sed -e '1{h;s/./=/g;p;x;}' -e '$${p;x;}' ++distuninstallcheck: ++ @cd $(distuninstallcheck_dir) \ ++ && test `$(distuninstallcheck_listfiles) | wc -l` -le 1 \ ++ || { echo "ERROR: files left after uninstall:" ; \ ++ if test -n "$(DESTDIR)"; then \ ++ echo " (check DESTDIR support)"; \ ++ fi ; \ ++ $(distuninstallcheck_listfiles) ; \ ++ exit 1; } >&2 ++distcleancheck: distclean ++ @if test '$(srcdir)' = . ; then \ ++ echo "ERROR: distcleancheck can only run from a VPATH build" ; \ ++ exit 1 ; \ ++ fi ++ @test `$(distcleancheck_listfiles) | wc -l` -eq 0 \ ++ || { echo "ERROR: files left in build directory after distclean:" ; \ ++ $(distcleancheck_listfiles) ; \ ++ exit 1; } >&2 + check-am: all-am + check: check-recursive +-installcheck-am: +-installcheck: installcheck-recursive +-all-recursive-am: config.h +- $(MAKE) $(AM_MAKEFLAGS) all-recursive +- +-install-exec-am: ++all-am: Makefile config.h ++installdirs: installdirs-recursive ++installdirs-am: ++install: install-recursive + install-exec: install-exec-recursive +- +-install-data-am: + install-data: install-data-recursive ++uninstall: uninstall-recursive + + install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +-install: install-recursive +-uninstall-am: +-uninstall: uninstall-recursive +-all-am: Makefile config.h +-all-redirect: all-recursive-am +-install-strip: +- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +-installdirs: installdirs-recursive +-installdirs-am: +- + ++installcheck: installcheck-recursive ++install-strip: ++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ ++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ ++ `test -z '$(STRIP)' || \ ++ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + mostlyclean-generic: + + clean-generic: + + distclean-generic: +- -rm -f Makefile $(CONFIG_CLEAN_FILES) +- -rm -f config.cache config.log stamp-h stamp-h[0-9]* ++ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + + maintainer-clean-generic: +-mostlyclean-am: mostlyclean-hdr mostlyclean-tags mostlyclean-generic ++ @echo "This command is intended for maintainers to use" ++ @echo "it deletes files that may require special tools to rebuild." ++clean: clean-recursive + +-mostlyclean: mostlyclean-recursive ++clean-am: clean-generic clean-libtool mostlyclean-am + +-clean-am: clean-hdr clean-tags clean-generic mostlyclean-am ++distclean: distclean-recursive ++ -rm -f $(am__CONFIG_DISTCLEAN_FILES) ++ -rm -f Makefile ++distclean-am: clean-am distclean-generic distclean-hdr \ ++ distclean-libtool distclean-tags + +-clean: clean-recursive ++dvi: dvi-recursive + +-distclean-am: distclean-hdr distclean-tags distclean-generic clean-am +- -rm -f libtool ++dvi-am: + +-distclean: distclean-recursive +- -rm -f config.status ++html: html-recursive + +-maintainer-clean-am: maintainer-clean-hdr maintainer-clean-tags \ +- maintainer-clean-generic distclean-am +- @echo "This command is intended for maintainers to use;" +- @echo "it deletes files that may require special tools to rebuild." ++info: info-recursive ++ ++info-am: ++ ++install-data-am: ++ ++install-exec-am: ++ ++install-info: install-info-recursive ++ ++install-man: ++ ++installcheck-am: + + maintainer-clean: maintainer-clean-recursive +- -rm -f config.status ++ -rm -f $(am__CONFIG_DISTCLEAN_FILES) ++ -rm -rf $(top_srcdir)/autom4te.cache ++ -rm -f Makefile ++maintainer-clean-am: distclean-am maintainer-clean-generic ++ ++mostlyclean: mostlyclean-recursive + +-.PHONY: mostlyclean-hdr distclean-hdr clean-hdr maintainer-clean-hdr \ +-install-data-recursive uninstall-data-recursive install-exec-recursive \ +-uninstall-exec-recursive installdirs-recursive uninstalldirs-recursive \ +-all-recursive check-recursive installcheck-recursive info-recursive \ +-dvi-recursive mostlyclean-recursive distclean-recursive clean-recursive \ +-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ +-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ +-dvi-am dvi check check-am installcheck-am installcheck all-recursive-am \ +-install-exec-am install-exec install-data-am install-data install-am \ +-install uninstall-am uninstall all-redirect all-am all installdirs-am \ +-installdirs mostlyclean-generic distclean-generic clean-generic \ +-maintainer-clean-generic clean mostlyclean distclean maintainer-clean ++mostlyclean-am: mostlyclean-generic mostlyclean-libtool ++ ++pdf: pdf-recursive ++ ++pdf-am: ++ ++ps: ps-recursive ++ ++ps-am: ++ ++uninstall-am: uninstall-info-am ++ ++uninstall-info: uninstall-info-recursive ++ ++.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am am--refresh check \ ++ check-am clean clean-generic clean-libtool clean-recursive \ ++ ctags ctags-recursive dist dist-all dist-bzip2 dist-gzip \ ++ dist-shar dist-tarZ dist-zip distcheck distclean \ ++ distclean-generic distclean-hdr distclean-libtool \ ++ distclean-recursive distclean-tags distcleancheck distdir \ ++ distuninstallcheck dvi dvi-am html html-am info info-am \ ++ install install-am install-data install-data-am install-exec \ ++ install-exec-am install-info install-info-am install-man \ ++ install-strip installcheck installcheck-am installdirs \ ++ installdirs-am maintainer-clean maintainer-clean-generic \ ++ maintainer-clean-recursive mostlyclean mostlyclean-generic \ ++ mostlyclean-libtool mostlyclean-recursive pdf pdf-am ps ps-am \ ++ tags tags-recursive uninstall uninstall-am uninstall-info-am + + + rpms: dist src/extra/linux-atm.spec +@@ -395,7 +635,6 @@ + + cscope: + cscope -b -R +- + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +Index: linux-atm-2.4.1/src/arpd/Makefile.in +=================================================================== +--- linux-atm-2.4.1.orig/src/arpd/Makefile.in 2007-10-20 21:45:35.746869525 +0200 ++++ linux-atm-2.4.1/src/arpd/Makefile.in 2007-10-20 21:45:44.311357591 +0200 +@@ -1,6 +1,8 @@ +-# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am ++# Makefile.in generated by automake 1.9.6 from Makefile.am. ++# @configure_input@ + +-# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. ++# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -10,211 +12,307 @@ + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + ++@SET_MAKE@ + +-SHELL = @SHELL@ + + srcdir = @srcdir@ + top_srcdir = @top_srcdir@ + VPATH = @srcdir@ +-prefix = @prefix@ +-exec_prefix = @exec_prefix@ +- +-bindir = @bindir@ +-sbindir = @sbindir@ +-libexecdir = @libexecdir@ +-datadir = @datadir@ +-sysconfdir = @sysconfdir@ +-sharedstatedir = @sharedstatedir@ +-localstatedir = @localstatedir@ +-libdir = @libdir@ +-infodir = @infodir@ +-mandir = @mandir@ +-includedir = @includedir@ +-oldincludedir = /usr/include +- +-DESTDIR = +- + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ +- + top_builddir = ../.. +- +-ACLOCAL = @ACLOCAL@ +-AUTOCONF = @AUTOCONF@ +-AUTOMAKE = @AUTOMAKE@ +-AUTOHEADER = @AUTOHEADER@ +- ++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + INSTALL = @INSTALL@ +-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +-INSTALL_DATA = @INSTALL_DATA@ +-INSTALL_SCRIPT = @INSTALL_SCRIPT@ +-transform = @program_transform_name@ +- ++install_sh_DATA = $(install_sh) -c -m 644 ++install_sh_PROGRAM = $(install_sh) -c ++install_sh_SCRIPT = $(install_sh) -c ++INSTALL_HEADER = $(INSTALL_DATA) ++transform = $(program_transform_name) + NORMAL_INSTALL = : + PRE_INSTALL = : + POST_INSTALL = : + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : +-build_alias = @build_alias@ + build_triplet = @build@ +-host_alias = @host_alias@ + host_triplet = @host@ +-target_alias = @target_alias@ + target_triplet = @target@ ++sbin_PROGRAMS = atmarp$(EXEEXT) atmarpd$(EXEEXT) ++subdir = src/arpd ++DIST_COMMON = $(include_HEADERS) $(srcdir)/Makefile.am \ ++ $(srcdir)/Makefile.in ++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 ++am__aclocal_m4_deps = $(top_srcdir)/configure.in ++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ ++ $(ACLOCAL_M4) ++mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs ++CONFIG_HEADER = $(top_builddir)/config.h ++CONFIG_CLEAN_FILES = ++am__installdirs = "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)" \ ++ "$(DESTDIR)$(includedir)" ++sbinPROGRAMS_INSTALL = $(INSTALL_PROGRAM) ++PROGRAMS = $(sbin_PROGRAMS) ++am_atmarp_OBJECTS = atmarp.$(OBJEXT) ++atmarp_OBJECTS = $(am_atmarp_OBJECTS) ++atmarp_LDADD = $(LDADD) ++atmarp_DEPENDENCIES = $(top_builddir)/src/lib/libatm.la ++am_atmarpd_OBJECTS = atmarpd.$(OBJEXT) arp.$(OBJEXT) io.$(OBJEXT) \ ++ itf.$(OBJEXT) table.$(OBJEXT) ++atmarpd_OBJECTS = $(am_atmarpd_OBJECTS) ++atmarpd_LDADD = $(LDADD) ++atmarpd_DEPENDENCIES = $(top_builddir)/src/lib/libatm.la ++DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) ++depcomp = $(SHELL) $(top_srcdir)/depcomp ++am__depfiles_maybe = depfiles ++COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ ++ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) ++LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \ ++ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ ++ $(AM_CFLAGS) $(CFLAGS) ++CCLD = $(CC) ++LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ ++ $(AM_LDFLAGS) $(LDFLAGS) -o $@ ++SOURCES = $(atmarp_SOURCES) $(atmarpd_SOURCES) ++DIST_SOURCES = $(atmarp_SOURCES) $(atmarpd_SOURCES) ++man8dir = $(mandir)/man8 ++NROFF = nroff ++MANS = $(man_MANS) ++am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; ++am__vpath_adj = case $$p in \ ++ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ ++ *) f=$$p;; \ ++ esac; ++am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; ++includeHEADERS_INSTALL = $(INSTALL_HEADER) ++HEADERS = $(include_HEADERS) ++ETAGS = etags ++CTAGS = ctags ++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++ACLOCAL = @ACLOCAL@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ ++AMTAR = @AMTAR@ + AR = @AR@ +-AS = @AS@ ++AUTOCONF = @AUTOCONF@ ++AUTOHEADER = @AUTOHEADER@ ++AUTOMAKE = @AUTOMAKE@ ++AWK = @AWK@ + CC = @CC@ ++CCDEPMODE = @CCDEPMODE@ ++CFLAGS = @CFLAGS@ ++CPP = @CPP@ ++CPPFLAGS = @CPPFLAGS@ + CXX = @CXX@ + CXXCPP = @CXXCPP@ +-DLLTOOL = @DLLTOOL@ ++CXXDEPMODE = @CXXDEPMODE@ ++CXXFLAGS = @CXXFLAGS@ ++CYGPATH_W = @CYGPATH_W@ ++DEFS = @DEFS@ ++DEPDIR = @DEPDIR@ + ECHO = @ECHO@ ++ECHO_C = @ECHO_C@ ++ECHO_N = @ECHO_N@ ++ECHO_T = @ECHO_T@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ + F77 = @F77@ +-GCJ = @GCJ@ +-GCJFLAGS = @GCJFLAGS@ +-HAVE_LIB = @HAVE_LIB@ ++FFLAGS = @FFLAGS@ ++GREP = @GREP@ ++INSTALL_DATA = @INSTALL_DATA@ ++INSTALL_PROGRAM = @INSTALL_PROGRAM@ ++INSTALL_SCRIPT = @INSTALL_SCRIPT@ ++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ ++LDFLAGS = @LDFLAGS@ + LEX = @LEX@ +-LIB = @LIB@ ++LEXLIB = @LEXLIB@ ++LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ ++LIBOBJS = @LIBOBJS@ ++LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBTOOL_DEPS = @LIBTOOL_DEPS@ + LIBVER_AGE = @LIBVER_AGE@ + LIBVER_CURRENT = @LIBVER_CURRENT@ + LIBVER_REVISION = @LIBVER_REVISION@ + LN_S = @LN_S@ +-LTLIB = @LTLIB@ ++LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-OBJDUMP = @OBJDUMP@ + OBJEXT = @OBJEXT@ + PACKAGE = @PACKAGE@ ++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ ++PACKAGE_NAME = @PACKAGE_NAME@ ++PACKAGE_STRING = @PACKAGE_STRING@ ++PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_VERSION = @PACKAGE_VERSION@ ++PATH_SEPARATOR = @PATH_SEPARATOR@ + PERL = @PERL@ + RANLIB = @RANLIB@ +-RC = @RC@ ++SET_MAKE = @SET_MAKE@ ++SHELL = @SHELL@ + STRIP = @STRIP@ + VERSION = @VERSION@ + YACC = @YACC@ +- ++YFLAGS = @YFLAGS@ ++ac_ct_CC = @ac_ct_CC@ ++ac_ct_CXX = @ac_ct_CXX@ ++ac_ct_F77 = @ac_ct_F77@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ ++am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ ++am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ ++am__include = @am__include@ ++am__leading_dot = @am__leading_dot@ ++am__quote = @am__quote@ ++am__tar = @am__tar@ ++am__untar = @am__untar@ ++bindir = @bindir@ ++build = @build@ ++build_alias = @build_alias@ ++build_cpu = @build_cpu@ ++build_os = @build_os@ ++build_vendor = @build_vendor@ ++datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ ++exec_prefix = @exec_prefix@ ++host = @host@ ++host_alias = @host_alias@ ++host_cpu = @host_cpu@ ++host_os = @host_os@ ++host_vendor = @host_vendor@ ++htmldir = @htmldir@ ++includedir = @includedir@ ++infodir = @infodir@ ++install_sh = @install_sh@ ++libdir = @libdir@ ++libexecdir = @libexecdir@ ++localedir = @localedir@ ++localstatedir = @localstatedir@ ++mandir = @mandir@ ++mkdir_p = @mkdir_p@ ++oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ ++prefix = @prefix@ ++program_transform_name = @program_transform_name@ ++psdir = @psdir@ ++sbindir = @sbindir@ ++sharedstatedir = @sharedstatedir@ ++sysconfdir = @sysconfdir@ ++target = @target@ ++target_alias = @target_alias@ ++target_cpu = @target_cpu@ ++target_os = @target_os@ ++target_vendor = @target_vendor@ + LDADD = $(top_builddir)/src/lib/libatm.la +- +-sbin_PROGRAMS = atmarp atmarpd +- + atmarp_SOURCES = atmarp.c atmarp.h atmarpd.h +-atmarpd_SOURCES = atmarpd.c atmarpd.h arp.c arp.h io.c io.h itf.c itf.h table.c table.h atmarp.h +- ++atmarpd_SOURCES = atmarpd.c atmarpd.h arp.c arp.h io.c io.h itf.c itf.h \ ++ table.c table.h atmarp.h + + include_HEADERS = atmarp.h atmarpd.h +- + man_MANS = atmarp.8 atmarpd.8 +- + EXTRA_DIST = $(man_MANS) +-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +-CONFIG_HEADER = ../../config.h +-CONFIG_CLEAN_FILES = +-sbin_PROGRAMS = atmarp$(EXEEXT) atmarpd$(EXEEXT) +-PROGRAMS = $(sbin_PROGRAMS) +- ++all: all-am + +-DEFS = @DEFS@ -I. -I$(srcdir) -I../.. +-CPPFLAGS = @CPPFLAGS@ +-LDFLAGS = @LDFLAGS@ +-LIBS = @LIBS@ +-atmarp_OBJECTS = atmarp.$(OBJEXT) +-atmarp_LDADD = $(LDADD) +-atmarp_DEPENDENCIES = $(top_builddir)/src/lib/libatm.la +-atmarp_LDFLAGS = +-atmarpd_OBJECTS = atmarpd.$(OBJEXT) arp.$(OBJEXT) io.$(OBJEXT) \ +-itf.$(OBJEXT) table.$(OBJEXT) +-atmarpd_LDADD = $(LDADD) +-atmarpd_DEPENDENCIES = $(top_builddir)/src/lib/libatm.la +-atmarpd_LDFLAGS = +-CFLAGS = @CFLAGS@ +-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +-CCLD = $(CC) +-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ +-man8dir = $(mandir)/man8 +-MANS = $(man_MANS) +- +-NROFF = nroff +-HEADERS = $(include_HEADERS) +- +-DIST_COMMON = Makefile.am Makefile.in +- +- +-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) +- +-TAR = tar +-GZIP_ENV = --best +-DEP_FILES = .deps/arp.P .deps/atmarp.P .deps/atmarpd.P .deps/io.P \ +-.deps/itf.P .deps/table.P +-SOURCES = $(atmarp_SOURCES) $(atmarpd_SOURCES) +-OBJECTS = $(atmarp_OBJECTS) $(atmarpd_OBJECTS) +- +-all: all-redirect + .SUFFIXES: +-.SUFFIXES: .S .c .lo .o .obj .s +-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) +- cd $(top_srcdir) && $(AUTOMAKE) --gnu src/arpd/Makefile +- +-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) +- cd $(top_builddir) \ +- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status +- +- +-mostlyclean-sbinPROGRAMS: +- +-clean-sbinPROGRAMS: +- -test -z "$(sbin_PROGRAMS)" || rm -f $(sbin_PROGRAMS) +- +-distclean-sbinPROGRAMS: +- +-maintainer-clean-sbinPROGRAMS: +- ++.SUFFIXES: .c .lo .o .obj ++$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) ++ @for dep in $?; do \ ++ case '$(am__configure_deps)' in \ ++ *$$dep*) \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ ++ && exit 0; \ ++ exit 1;; \ ++ esac; \ ++ done; \ ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/arpd/Makefile'; \ ++ cd $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu src/arpd/Makefile ++.PRECIOUS: Makefile ++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ++ @case '$?' in \ ++ *config.status*) \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ ++ *) \ ++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ ++ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ ++ esac; ++ ++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++ ++$(top_srcdir)/configure: $(am__configure_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(ACLOCAL_M4): $(am__aclocal_m4_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + install-sbinPROGRAMS: $(sbin_PROGRAMS) + @$(NORMAL_INSTALL) +- $(mkinstalldirs) $(DESTDIR)$(sbindir) ++ test -z "$(sbindir)" || $(mkdir_p) "$(DESTDIR)$(sbindir)" + @list='$(sbin_PROGRAMS)'; for p in $$list; do \ +- if test -f $$p; then \ +- echo " $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`"; \ +- $(LIBTOOL) --mode=install $(INSTALL_PROGRAM) $$p $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ ++ p1=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ ++ if test -f $$p \ ++ || test -f $$p1 \ ++ ; then \ ++ f=`echo "$$p1" | sed 's,^.*/,,;$(transform);s/$$/$(EXEEXT)/'`; \ ++ echo " $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(sbinPROGRAMS_INSTALL) '$$p' '$(DESTDIR)$(sbindir)/$$f'"; \ ++ $(INSTALL_PROGRAM_ENV) $(LIBTOOL) --mode=install $(sbinPROGRAMS_INSTALL) "$$p" "$(DESTDIR)$(sbindir)/$$f" || exit 1; \ + else :; fi; \ + done + + uninstall-sbinPROGRAMS: + @$(NORMAL_UNINSTALL) +- list='$(sbin_PROGRAMS)'; for p in $$list; do \ +- rm -f $(DESTDIR)$(sbindir)/`echo $$p|sed 's/$(EXEEXT)$$//'|sed '$(transform)'|sed 's/$$/$(EXEEXT)/'`; \ ++ @list='$(sbin_PROGRAMS)'; for p in $$list; do \ ++ f=`echo "$$p" | sed 's,^.*/,,;s/$(EXEEXT)$$//;$(transform);s/$$/$(EXEEXT)/'`; \ ++ echo " rm -f '$(DESTDIR)$(sbindir)/$$f'"; \ ++ rm -f "$(DESTDIR)$(sbindir)/$$f"; \ + done + +-# FIXME: We should only use cygpath when building on Windows, +-# and only if it is available. +-.c.obj: +- $(COMPILE) -c `cygpath -w $<` +- +-.s.o: +- $(COMPILE) -c $< +- +-.S.o: +- $(COMPILE) -c $< ++clean-sbinPROGRAMS: ++ @list='$(sbin_PROGRAMS)'; for p in $$list; do \ ++ f=`echo $$p|sed 's/$(EXEEXT)$$//'`; \ ++ echo " rm -f $$p $$f"; \ ++ rm -f $$p $$f ; \ ++ done ++atmarp$(EXEEXT): $(atmarp_OBJECTS) $(atmarp_DEPENDENCIES) ++ @rm -f atmarp$(EXEEXT) ++ $(LINK) $(atmarp_LDFLAGS) $(atmarp_OBJECTS) $(atmarp_LDADD) $(LIBS) ++atmarpd$(EXEEXT): $(atmarpd_OBJECTS) $(atmarpd_DEPENDENCIES) ++ @rm -f atmarpd$(EXEEXT) ++ $(LINK) $(atmarpd_LDFLAGS) $(atmarpd_OBJECTS) $(atmarpd_LDADD) $(LIBS) + + mostlyclean-compile: +- -rm -f *.o core *.core + -rm -f *.$(OBJEXT) + +-clean-compile: +- + distclean-compile: + -rm -f *.tab.c + +-maintainer-clean-compile: +- +-.s.lo: +- $(LIBTOOL) --mode=compile $(COMPILE) -c $< ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/arp.Po@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/atmarp.Po@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/atmarpd.Po@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/io.Po@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/itf.Po@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/table.Po@am__quote@ ++ ++.c.o: ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@am__fastdepCC_FALSE@ $(COMPILE) -c $< + +-.S.lo: +- $(LIBTOOL) --mode=compile $(COMPILE) -c $< ++.c.obj: ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` ++ ++.c.lo: ++@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + + mostlyclean-libtool: + -rm -f *.lo +@@ -223,21 +321,14 @@ + -rm -rf .libs _libs + + distclean-libtool: +- +-maintainer-clean-libtool: +- +-atmarp$(EXEEXT): $(atmarp_OBJECTS) $(atmarp_DEPENDENCIES) +- @rm -f atmarp$(EXEEXT) +- $(LINK) $(atmarp_LDFLAGS) $(atmarp_OBJECTS) $(atmarp_LDADD) $(LIBS) +- +-atmarpd$(EXEEXT): $(atmarpd_OBJECTS) $(atmarpd_DEPENDENCIES) +- @rm -f atmarpd$(EXEEXT) +- $(LINK) $(atmarpd_LDFLAGS) $(atmarpd_OBJECTS) $(atmarpd_LDADD) $(LIBS) +- +-install-man8: +- $(mkinstalldirs) $(DESTDIR)$(man8dir) +- @list='$(man8_MANS)'; \ +- l2='$(man_MANS)'; for i in $$l2; do \ ++ -rm -f libtool ++uninstall-info-am: ++install-man8: $(man8_MANS) $(man_MANS) ++ @$(NORMAL_INSTALL) ++ test -z "$(man8dir)" || $(mkdir_p) "$(DESTDIR)$(man8dir)" ++ @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \ ++ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ ++ for i in $$l2; do \ + case "$$i" in \ + *.8*) list="$$list $$i" ;; \ + esac; \ +@@ -246,209 +337,228 @@ + if test -f $(srcdir)/$$i; then file=$(srcdir)/$$i; \ + else file=$$i; fi; \ + ext=`echo $$i | sed -e 's/^.*\\.//'`; \ ++ case "$$ext" in \ ++ 8*) ;; \ ++ *) ext='8' ;; \ ++ esac; \ + inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ ++ inst=`echo $$inst | sed -e 's/^.*\///'`; \ + inst=`echo $$inst | sed '$(transform)'`.$$ext; \ +- echo " $(INSTALL_DATA) $$file $(DESTDIR)$(man8dir)/$$inst"; \ +- $(INSTALL_DATA) $$file $(DESTDIR)$(man8dir)/$$inst; \ ++ echo " $(INSTALL_DATA) '$$file' '$(DESTDIR)$(man8dir)/$$inst'"; \ ++ $(INSTALL_DATA) "$$file" "$(DESTDIR)$(man8dir)/$$inst"; \ + done +- + uninstall-man8: +- @list='$(man8_MANS)'; \ +- l2='$(man_MANS)'; for i in $$l2; do \ ++ @$(NORMAL_UNINSTALL) ++ @list='$(man8_MANS) $(dist_man8_MANS) $(nodist_man8_MANS)'; \ ++ l2='$(man_MANS) $(dist_man_MANS) $(nodist_man_MANS)'; \ ++ for i in $$l2; do \ + case "$$i" in \ + *.8*) list="$$list $$i" ;; \ + esac; \ + done; \ + for i in $$list; do \ + ext=`echo $$i | sed -e 's/^.*\\.//'`; \ ++ case "$$ext" in \ ++ 8*) ;; \ ++ *) ext='8' ;; \ ++ esac; \ + inst=`echo $$i | sed -e 's/\\.[0-9a-z]*$$//'`; \ ++ inst=`echo $$inst | sed -e 's/^.*\///'`; \ + inst=`echo $$inst | sed '$(transform)'`.$$ext; \ +- echo " rm -f $(DESTDIR)$(man8dir)/$$inst"; \ +- rm -f $(DESTDIR)$(man8dir)/$$inst; \ ++ echo " rm -f '$(DESTDIR)$(man8dir)/$$inst'"; \ ++ rm -f "$(DESTDIR)$(man8dir)/$$inst"; \ + done +-install-man: $(MANS) +- @$(NORMAL_INSTALL) +- $(MAKE) $(AM_MAKEFLAGS) install-man8 +-uninstall-man: +- @$(NORMAL_UNINSTALL) +- $(MAKE) $(AM_MAKEFLAGS) uninstall-man8 +- + install-includeHEADERS: $(include_HEADERS) + @$(NORMAL_INSTALL) +- $(mkinstalldirs) $(DESTDIR)$(includedir) ++ test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)" + @list='$(include_HEADERS)'; for p in $$list; do \ +- if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \ +- echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(includedir)/$$p"; \ +- $(INSTALL_DATA) $$d$$p $(DESTDIR)$(includedir)/$$p; \ ++ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ ++ f=$(am__strip_dir) \ ++ echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \ ++ $(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \ + done + + uninstall-includeHEADERS: + @$(NORMAL_UNINSTALL) +- list='$(include_HEADERS)'; for p in $$list; do \ +- rm -f $(DESTDIR)$(includedir)/$$p; \ ++ @list='$(include_HEADERS)'; for p in $$list; do \ ++ f=$(am__strip_dir) \ ++ echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \ ++ rm -f "$(DESTDIR)$(includedir)/$$f"; \ + done + ++ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) ++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ ++ mkid -fID $$unique + tags: TAGS + +-ID: $(HEADERS) $(SOURCES) $(LISP) +- list='$(SOURCES) $(HEADERS)'; \ +- unique=`for i in $$list; do echo $$i; done | \ +- awk ' { files[$$0] = 1; } \ ++TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ ++ $(TAGS_FILES) $(LISP) ++ tags=; \ ++ here=`pwd`; \ ++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | \ ++ $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ +- here=`pwd` && cd $(srcdir) \ +- && mkid -f$$here/ID $$unique $(LISP) +- +-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) ++ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ test -n "$$unique" || unique=$$empty_fix; \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$tags $$unique; \ ++ fi ++ctags: CTAGS ++CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ ++ $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ +- list='$(SOURCES) $(HEADERS)'; \ +- unique=`for i in $$list; do echo $$i; done | \ +- awk ' { files[$$0] = 1; } \ ++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | \ ++ $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ +- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ +- || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP)) +- +-mostlyclean-tags: +- +-clean-tags: ++ test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ ++ $$tags $$unique ++ ++GTAGS: ++ here=`$(am__cd) $(top_builddir) && pwd` \ ++ && cd $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) $$here + + distclean-tags: +- -rm -f TAGS ID +- +-maintainer-clean-tags: +- +-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) +- +-subdir = src/arpd ++ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) +- here=`cd $(top_builddir) && pwd`; \ +- top_distdir=`cd $(top_distdir) && pwd`; \ +- distdir=`cd $(distdir) && pwd`; \ +- cd $(top_srcdir) \ +- && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/arpd/Makefile +- @for file in $(DISTFILES); do \ +- d=$(srcdir); \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ ++ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- cp -pr $$d/$$file $(distdir)/$$file; \ ++ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ ++ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ fi; \ ++ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ +- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ +- || cp -p $$d/$$file $(distdir)/$$file || :; \ ++ || cp -p $$d/$$file $(distdir)/$$file \ ++ || exit 1; \ + fi; \ + done +- +-DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) +- +--include $(DEP_FILES) +- +-mostlyclean-depend: +- +-clean-depend: +- +-distclean-depend: +- -rm -rf .deps +- +-maintainer-clean-depend: +- +-%.o: %.c +- @echo '$(COMPILE) -c $<'; \ +- $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< +- @-cp .deps/$(*F).pp .deps/$(*F).P; \ +- tr ' ' '\012' < .deps/$(*F).pp \ +- | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ +- >> .deps/$(*F).P; \ +- rm .deps/$(*F).pp +- +-%.lo: %.c +- @echo '$(LTCOMPILE) -c $<'; \ +- $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< +- @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ +- < .deps/$(*F).pp > .deps/$(*F).P; \ +- tr ' ' '\012' < .deps/$(*F).pp \ +- | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ +- >> .deps/$(*F).P; \ +- rm -f .deps/$(*F).pp +-info-am: +-info: info-am +-dvi-am: +-dvi: dvi-am + check-am: all-am + check: check-am +-installcheck-am: +-installcheck: installcheck-am +-install-exec-am: install-sbinPROGRAMS ++all-am: Makefile $(PROGRAMS) $(MANS) $(HEADERS) ++installdirs: ++ for dir in "$(DESTDIR)$(sbindir)" "$(DESTDIR)$(man8dir)" "$(DESTDIR)$(includedir)"; do \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ ++ done ++install: install-am + install-exec: install-exec-am +- +-install-data-am: install-man install-includeHEADERS + install-data: install-data-am ++uninstall: uninstall-am + + install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +-install: install-am +-uninstall-am: uninstall-sbinPROGRAMS uninstall-man \ +- uninstall-includeHEADERS +-uninstall: uninstall-am +-all-am: Makefile $(PROGRAMS) $(MANS) $(HEADERS) +-all-redirect: all-am +-install-strip: +- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +-installdirs: +- $(mkinstalldirs) $(DESTDIR)$(sbindir) $(DESTDIR)$(mandir)/man8 \ +- $(DESTDIR)$(includedir) +- + ++installcheck: installcheck-am ++install-strip: ++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ ++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ ++ `test -z '$(STRIP)' || \ ++ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + mostlyclean-generic: + + clean-generic: + + distclean-generic: +- -rm -f Makefile $(CONFIG_CLEAN_FILES) +- -rm -f config.cache config.log stamp-h stamp-h[0-9]* ++ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + + maintainer-clean-generic: +-mostlyclean-am: mostlyclean-sbinPROGRAMS mostlyclean-compile \ +- mostlyclean-libtool mostlyclean-tags mostlyclean-depend \ +- mostlyclean-generic ++ @echo "This command is intended for maintainers to use" ++ @echo "it deletes files that may require special tools to rebuild." ++clean: clean-am + +-mostlyclean: mostlyclean-am ++clean-am: clean-generic clean-libtool clean-sbinPROGRAMS \ ++ mostlyclean-am + +-clean-am: clean-sbinPROGRAMS clean-compile clean-libtool clean-tags \ +- clean-depend clean-generic mostlyclean-am ++distclean: distclean-am ++ -rm -rf ./$(DEPDIR) ++ -rm -f Makefile ++distclean-am: clean-am distclean-compile distclean-generic \ ++ distclean-libtool distclean-tags + +-clean: clean-am ++dvi: dvi-am + +-distclean-am: distclean-sbinPROGRAMS distclean-compile \ +- distclean-libtool distclean-tags distclean-depend \ +- distclean-generic clean-am +- -rm -f libtool ++dvi-am: + +-distclean: distclean-am ++html: html-am + +-maintainer-clean-am: maintainer-clean-sbinPROGRAMS \ +- maintainer-clean-compile maintainer-clean-libtool \ +- maintainer-clean-tags maintainer-clean-depend \ +- maintainer-clean-generic distclean-am +- @echo "This command is intended for maintainers to use;" +- @echo "it deletes files that may require special tools to rebuild." ++info: info-am ++ ++info-am: ++ ++install-data-am: install-includeHEADERS install-man ++ ++install-exec-am: install-sbinPROGRAMS ++ ++install-info: install-info-am ++ ++install-man: install-man8 ++ ++installcheck-am: + + maintainer-clean: maintainer-clean-am ++ -rm -rf ./$(DEPDIR) ++ -rm -f Makefile ++maintainer-clean-am: distclean-am maintainer-clean-generic ++ ++mostlyclean: mostlyclean-am ++ ++mostlyclean-am: mostlyclean-compile mostlyclean-generic \ ++ mostlyclean-libtool ++ ++pdf: pdf-am ++ ++pdf-am: + +-.PHONY: mostlyclean-sbinPROGRAMS distclean-sbinPROGRAMS \ +-clean-sbinPROGRAMS maintainer-clean-sbinPROGRAMS uninstall-sbinPROGRAMS \ +-install-sbinPROGRAMS mostlyclean-compile distclean-compile \ +-clean-compile maintainer-clean-compile mostlyclean-libtool \ +-distclean-libtool clean-libtool maintainer-clean-libtool install-man8 \ +-uninstall-man8 install-man uninstall-man uninstall-includeHEADERS \ +-install-includeHEADERS tags mostlyclean-tags distclean-tags clean-tags \ +-maintainer-clean-tags distdir mostlyclean-depend distclean-depend \ +-clean-depend maintainer-clean-depend info-am info dvi-am dvi check \ +-check-am installcheck-am installcheck install-exec-am install-exec \ +-install-data-am install-data install-am install uninstall-am uninstall \ +-all-redirect all-am all installdirs mostlyclean-generic \ +-distclean-generic clean-generic maintainer-clean-generic clean \ +-mostlyclean distclean maintainer-clean ++ps: ps-am + ++ps-am: ++ ++uninstall-am: uninstall-includeHEADERS uninstall-info-am uninstall-man \ ++ uninstall-sbinPROGRAMS ++ ++uninstall-man: uninstall-man8 ++ ++.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ ++ clean-libtool clean-sbinPROGRAMS ctags distclean \ ++ distclean-compile distclean-generic distclean-libtool \ ++ distclean-tags distdir dvi dvi-am html html-am info info-am \ ++ install install-am install-data install-data-am install-exec \ ++ install-exec-am install-includeHEADERS install-info \ ++ install-info-am install-man install-man8 install-sbinPROGRAMS \ ++ install-strip installcheck installcheck-am installdirs \ ++ maintainer-clean maintainer-clean-generic mostlyclean \ ++ mostlyclean-compile mostlyclean-generic mostlyclean-libtool \ ++ pdf pdf-am ps ps-am tags uninstall uninstall-am \ ++ uninstall-includeHEADERS uninstall-info-am uninstall-man \ ++ uninstall-man8 uninstall-sbinPROGRAMS + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +Index: linux-atm-2.4.1/src/include/Makefile.in +=================================================================== +--- linux-atm-2.4.1.orig/src/include/Makefile.in 2007-10-20 21:45:35.734868844 +0200 ++++ linux-atm-2.4.1/src/include/Makefile.in 2007-10-20 21:45:44.315357817 +0200 +@@ -1,6 +1,8 @@ +-# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am ++# Makefile.in generated by automake 1.9.6 from Makefile.am. ++# @configure_input@ + +-# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. ++# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -10,244 +12,396 @@ + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + +- +-SHELL = @SHELL@ ++@SET_MAKE@ + + srcdir = @srcdir@ + top_srcdir = @top_srcdir@ + VPATH = @srcdir@ +-prefix = @prefix@ +-exec_prefix = @exec_prefix@ +- +-bindir = @bindir@ +-sbindir = @sbindir@ +-libexecdir = @libexecdir@ +-datadir = @datadir@ +-sysconfdir = @sysconfdir@ +-sharedstatedir = @sharedstatedir@ +-localstatedir = @localstatedir@ +-libdir = @libdir@ +-infodir = @infodir@ +-mandir = @mandir@ +-includedir = @includedir@ +-oldincludedir = /usr/include +- +-DESTDIR = +- + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ +- + top_builddir = ../.. +- +-ACLOCAL = @ACLOCAL@ +-AUTOCONF = @AUTOCONF@ +-AUTOMAKE = @AUTOMAKE@ +-AUTOHEADER = @AUTOHEADER@ +- ++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + INSTALL = @INSTALL@ +-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +-INSTALL_DATA = @INSTALL_DATA@ +-INSTALL_SCRIPT = @INSTALL_SCRIPT@ +-transform = @program_transform_name@ +- ++install_sh_DATA = $(install_sh) -c -m 644 ++install_sh_PROGRAM = $(install_sh) -c ++install_sh_SCRIPT = $(install_sh) -c ++INSTALL_HEADER = $(INSTALL_DATA) ++transform = $(program_transform_name) + NORMAL_INSTALL = : + PRE_INSTALL = : + POST_INSTALL = : + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : +-build_alias = @build_alias@ + build_triplet = @build@ +-host_alias = @host_alias@ + host_triplet = @host@ +-target_alias = @target_alias@ + target_triplet = @target@ ++subdir = src/include ++DIST_COMMON = $(include_HEADERS) $(noinst_HEADERS) \ ++ $(srcdir)/Makefile.am $(srcdir)/Makefile.in ++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 ++am__aclocal_m4_deps = $(top_srcdir)/configure.in ++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ ++ $(ACLOCAL_M4) ++mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs ++CONFIG_HEADER = $(top_builddir)/config.h ++CONFIG_CLEAN_FILES = ++SOURCES = ++DIST_SOURCES = ++am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; ++am__vpath_adj = case $$p in \ ++ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ ++ *) f=$$p;; \ ++ esac; ++am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; ++am__installdirs = "$(DESTDIR)$(includedir)" ++includeHEADERS_INSTALL = $(INSTALL_HEADER) ++HEADERS = $(include_HEADERS) $(noinst_HEADERS) ++ETAGS = etags ++CTAGS = ctags ++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++ACLOCAL = @ACLOCAL@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ ++AMTAR = @AMTAR@ + AR = @AR@ +-AS = @AS@ ++AUTOCONF = @AUTOCONF@ ++AUTOHEADER = @AUTOHEADER@ ++AUTOMAKE = @AUTOMAKE@ ++AWK = @AWK@ + CC = @CC@ ++CCDEPMODE = @CCDEPMODE@ ++CFLAGS = @CFLAGS@ ++CPP = @CPP@ ++CPPFLAGS = @CPPFLAGS@ + CXX = @CXX@ + CXXCPP = @CXXCPP@ +-DLLTOOL = @DLLTOOL@ ++CXXDEPMODE = @CXXDEPMODE@ ++CXXFLAGS = @CXXFLAGS@ ++CYGPATH_W = @CYGPATH_W@ ++DEFS = @DEFS@ ++DEPDIR = @DEPDIR@ + ECHO = @ECHO@ ++ECHO_C = @ECHO_C@ ++ECHO_N = @ECHO_N@ ++ECHO_T = @ECHO_T@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ + F77 = @F77@ +-GCJ = @GCJ@ +-GCJFLAGS = @GCJFLAGS@ +-HAVE_LIB = @HAVE_LIB@ ++FFLAGS = @FFLAGS@ ++GREP = @GREP@ ++INSTALL_DATA = @INSTALL_DATA@ ++INSTALL_PROGRAM = @INSTALL_PROGRAM@ ++INSTALL_SCRIPT = @INSTALL_SCRIPT@ ++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ ++LDFLAGS = @LDFLAGS@ + LEX = @LEX@ +-LIB = @LIB@ ++LEXLIB = @LEXLIB@ ++LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ ++LIBOBJS = @LIBOBJS@ ++LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBTOOL_DEPS = @LIBTOOL_DEPS@ + LIBVER_AGE = @LIBVER_AGE@ + LIBVER_CURRENT = @LIBVER_CURRENT@ + LIBVER_REVISION = @LIBVER_REVISION@ + LN_S = @LN_S@ +-LTLIB = @LTLIB@ ++LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-OBJDUMP = @OBJDUMP@ + OBJEXT = @OBJEXT@ + PACKAGE = @PACKAGE@ ++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ ++PACKAGE_NAME = @PACKAGE_NAME@ ++PACKAGE_STRING = @PACKAGE_STRING@ ++PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_VERSION = @PACKAGE_VERSION@ ++PATH_SEPARATOR = @PATH_SEPARATOR@ + PERL = @PERL@ + RANLIB = @RANLIB@ +-RC = @RC@ ++SET_MAKE = @SET_MAKE@ ++SHELL = @SHELL@ + STRIP = @STRIP@ + VERSION = @VERSION@ + YACC = @YACC@ +- ++YFLAGS = @YFLAGS@ ++ac_ct_CC = @ac_ct_CC@ ++ac_ct_CXX = @ac_ct_CXX@ ++ac_ct_F77 = @ac_ct_F77@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ ++am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ ++am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ ++am__include = @am__include@ ++am__leading_dot = @am__leading_dot@ ++am__quote = @am__quote@ ++am__tar = @am__tar@ ++am__untar = @am__untar@ ++bindir = @bindir@ ++build = @build@ ++build_alias = @build_alias@ ++build_cpu = @build_cpu@ ++build_os = @build_os@ ++build_vendor = @build_vendor@ ++datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ ++exec_prefix = @exec_prefix@ ++host = @host@ ++host_alias = @host_alias@ ++host_cpu = @host_cpu@ ++host_os = @host_os@ ++host_vendor = @host_vendor@ ++htmldir = @htmldir@ ++includedir = @includedir@ ++infodir = @infodir@ ++install_sh = @install_sh@ ++libdir = @libdir@ ++libexecdir = @libexecdir@ ++localedir = @localedir@ ++localstatedir = @localstatedir@ ++mandir = @mandir@ ++mkdir_p = @mkdir_p@ ++oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ ++prefix = @prefix@ ++program_transform_name = @program_transform_name@ ++psdir = @psdir@ ++sbindir = @sbindir@ ++sharedstatedir = @sharedstatedir@ ++sysconfdir = @sysconfdir@ ++target = @target@ ++target_alias = @target_alias@ ++target_cpu = @target_cpu@ ++target_os = @target_os@ ++target_vendor = @target_vendor@ + include_HEADERS = atm.h atmd.h atmsap.h + noinst_HEADERS = stdint.h +-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +-CONFIG_HEADER = ../../config.h +-CONFIG_CLEAN_FILES = +-HEADERS = $(include_HEADERS) $(noinst_HEADERS) +- +-DIST_COMMON = Makefile.am Makefile.in +- ++all: all-am + +-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) +- +-TAR = tar +-GZIP_ENV = --best +-all: all-redirect + .SUFFIXES: +-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) +- cd $(top_srcdir) && $(AUTOMAKE) --gnu src/include/Makefile ++$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) ++ @for dep in $?; do \ ++ case '$(am__configure_deps)' in \ ++ *$$dep*) \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ ++ && exit 0; \ ++ exit 1;; \ ++ esac; \ ++ done; \ ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/include/Makefile'; \ ++ cd $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu src/include/Makefile ++.PRECIOUS: Makefile ++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ++ @case '$?' in \ ++ *config.status*) \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ ++ *) \ ++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ ++ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ ++ esac; ++ ++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++ ++$(top_srcdir)/configure: $(am__configure_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(ACLOCAL_M4): $(am__aclocal_m4_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) +- cd $(top_builddir) \ +- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status ++mostlyclean-libtool: ++ -rm -f *.lo + ++clean-libtool: ++ -rm -rf .libs _libs + ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + install-includeHEADERS: $(include_HEADERS) + @$(NORMAL_INSTALL) +- $(mkinstalldirs) $(DESTDIR)$(includedir) ++ test -z "$(includedir)" || $(mkdir_p) "$(DESTDIR)$(includedir)" + @list='$(include_HEADERS)'; for p in $$list; do \ +- if test -f "$$p"; then d= ; else d="$(srcdir)/"; fi; \ +- echo " $(INSTALL_DATA) $$d$$p $(DESTDIR)$(includedir)/$$p"; \ +- $(INSTALL_DATA) $$d$$p $(DESTDIR)$(includedir)/$$p; \ ++ if test -f "$$p"; then d=; else d="$(srcdir)/"; fi; \ ++ f=$(am__strip_dir) \ ++ echo " $(includeHEADERS_INSTALL) '$$d$$p' '$(DESTDIR)$(includedir)/$$f'"; \ ++ $(includeHEADERS_INSTALL) "$$d$$p" "$(DESTDIR)$(includedir)/$$f"; \ + done + + uninstall-includeHEADERS: + @$(NORMAL_UNINSTALL) +- list='$(include_HEADERS)'; for p in $$list; do \ +- rm -f $(DESTDIR)$(includedir)/$$p; \ ++ @list='$(include_HEADERS)'; for p in $$list; do \ ++ f=$(am__strip_dir) \ ++ echo " rm -f '$(DESTDIR)$(includedir)/$$f'"; \ ++ rm -f "$(DESTDIR)$(includedir)/$$f"; \ + done + ++ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) ++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ ++ mkid -fID $$unique + tags: TAGS + +-ID: $(HEADERS) $(SOURCES) $(LISP) +- list='$(SOURCES) $(HEADERS)'; \ +- unique=`for i in $$list; do echo $$i; done | \ +- awk ' { files[$$0] = 1; } \ ++TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ ++ $(TAGS_FILES) $(LISP) ++ tags=; \ ++ here=`pwd`; \ ++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | \ ++ $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ +- here=`pwd` && cd $(srcdir) \ +- && mkid -f$$here/ID $$unique $(LISP) +- +-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) ++ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ test -n "$$unique" || unique=$$empty_fix; \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$tags $$unique; \ ++ fi ++ctags: CTAGS ++CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ ++ $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ +- list='$(SOURCES) $(HEADERS)'; \ +- unique=`for i in $$list; do echo $$i; done | \ +- awk ' { files[$$0] = 1; } \ ++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | \ ++ $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ +- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ +- || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP)) +- +-mostlyclean-tags: +- +-clean-tags: ++ test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ ++ $$tags $$unique ++ ++GTAGS: ++ here=`$(am__cd) $(top_builddir) && pwd` \ ++ && cd $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) $$here + + distclean-tags: +- -rm -f TAGS ID +- +-maintainer-clean-tags: +- +-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) +- +-subdir = src/include ++ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) +- here=`cd $(top_builddir) && pwd`; \ +- top_distdir=`cd $(top_distdir) && pwd`; \ +- distdir=`cd $(distdir) && pwd`; \ +- cd $(top_srcdir) \ +- && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/include/Makefile +- @for file in $(DISTFILES); do \ +- d=$(srcdir); \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ ++ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- cp -pr $$d/$$file $(distdir)/$$file; \ ++ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ ++ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ fi; \ ++ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ +- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ +- || cp -p $$d/$$file $(distdir)/$$file || :; \ ++ || cp -p $$d/$$file $(distdir)/$$file \ ++ || exit 1; \ + fi; \ + done +-info-am: +-info: info-am +-dvi-am: +-dvi: dvi-am + check-am: all-am + check: check-am +-installcheck-am: +-installcheck: installcheck-am +-install-exec-am: ++all-am: Makefile $(HEADERS) ++installdirs: ++ for dir in "$(DESTDIR)$(includedir)"; do \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ ++ done ++install: install-am + install-exec: install-exec-am +- +-install-data-am: install-includeHEADERS + install-data: install-data-am ++uninstall: uninstall-am + + install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +-install: install-am +-uninstall-am: uninstall-includeHEADERS +-uninstall: uninstall-am +-all-am: Makefile $(HEADERS) +-all-redirect: all-am +-install-strip: +- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +-installdirs: +- $(mkinstalldirs) $(DESTDIR)$(includedir) +- + ++installcheck: installcheck-am ++install-strip: ++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ ++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ ++ `test -z '$(STRIP)' || \ ++ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + mostlyclean-generic: + + clean-generic: + + distclean-generic: +- -rm -f Makefile $(CONFIG_CLEAN_FILES) +- -rm -f config.cache config.log stamp-h stamp-h[0-9]* ++ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + + maintainer-clean-generic: +-mostlyclean-am: mostlyclean-tags mostlyclean-generic ++ @echo "This command is intended for maintainers to use" ++ @echo "it deletes files that may require special tools to rebuild." ++clean: clean-am + +-mostlyclean: mostlyclean-am ++clean-am: clean-generic clean-libtool mostlyclean-am + +-clean-am: clean-tags clean-generic mostlyclean-am ++distclean: distclean-am ++ -rm -f Makefile ++distclean-am: clean-am distclean-generic distclean-libtool \ ++ distclean-tags + +-clean: clean-am ++dvi: dvi-am + +-distclean-am: distclean-tags distclean-generic clean-am +- -rm -f libtool ++dvi-am: + +-distclean: distclean-am ++html: html-am + +-maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \ +- distclean-am +- @echo "This command is intended for maintainers to use;" +- @echo "it deletes files that may require special tools to rebuild." ++info: info-am ++ ++info-am: ++ ++install-data-am: install-includeHEADERS ++ ++install-exec-am: ++ ++install-info: install-info-am ++ ++install-man: ++ ++installcheck-am: + + maintainer-clean: maintainer-clean-am ++ -rm -f Makefile ++maintainer-clean-am: distclean-am maintainer-clean-generic ++ ++mostlyclean: mostlyclean-am ++ ++mostlyclean-am: mostlyclean-generic mostlyclean-libtool ++ ++pdf: pdf-am ++ ++pdf-am: ++ ++ps: ps-am ++ ++ps-am: + +-.PHONY: uninstall-includeHEADERS install-includeHEADERS tags \ +-mostlyclean-tags distclean-tags clean-tags maintainer-clean-tags \ +-distdir info-am info dvi-am dvi check check-am installcheck-am \ +-installcheck install-exec-am install-exec install-data-am install-data \ +-install-am install uninstall-am uninstall all-redirect all-am all \ +-installdirs mostlyclean-generic distclean-generic clean-generic \ +-maintainer-clean-generic clean mostlyclean distclean maintainer-clean ++uninstall-am: uninstall-includeHEADERS uninstall-info-am + ++.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ ++ clean-libtool ctags distclean distclean-generic \ ++ distclean-libtool distclean-tags distdir dvi dvi-am html \ ++ html-am info info-am install install-am install-data \ ++ install-data-am install-exec install-exec-am \ ++ install-includeHEADERS install-info install-info-am \ ++ install-man install-strip installcheck installcheck-am \ ++ installdirs maintainer-clean maintainer-clean-generic \ ++ mostlyclean mostlyclean-generic mostlyclean-libtool pdf pdf-am \ ++ ps ps-am tags uninstall uninstall-am uninstall-includeHEADERS \ ++ uninstall-info-am + + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. +Index: linux-atm-2.4.1/src/lib/Makefile.am +=================================================================== +--- linux-atm-2.4.1.orig/src/lib/Makefile.am 2007-10-20 21:45:34.310787689 +0200 ++++ linux-atm-2.4.1/src/lib/Makefile.am 2007-10-20 21:45:44.319358043 +0200 +@@ -2,7 +2,7 @@ + lib_LTLIBRARIES = libatm.la + + # ATMLIBS_VERSION comes from configure.in in the toplevel directory +-LDFLAGS = -version-info @LIBVER_CURRENT@:@LIBVER_REVISION@:@LIBVER_AGE@ ++AM_LDFLAGS = -version-info @LIBVER_CURRENT@:@LIBVER_REVISION@:@LIBVER_AGE@ + + + +Index: linux-atm-2.4.1/src/lib/Makefile.in +=================================================================== +--- linux-atm-2.4.1.orig/src/lib/Makefile.in 2007-10-20 21:45:35.738869071 +0200 ++++ linux-atm-2.4.1/src/lib/Makefile.in 2007-10-20 21:45:44.323358271 +0200 +@@ -1,6 +1,8 @@ +-# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am ++# Makefile.in generated by automake 1.9.6 from Makefile.am. ++# @configure_input@ + +-# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. ++# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -10,200 +12,310 @@ + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + +-#lib_LTLIBRARIES = libatm.la libatmd.la +- +- +-SHELL = @SHELL@ ++@SET_MAKE@ + + srcdir = @srcdir@ + top_srcdir = @top_srcdir@ + VPATH = @srcdir@ +-prefix = @prefix@ +-exec_prefix = @exec_prefix@ +- +-bindir = @bindir@ +-sbindir = @sbindir@ +-libexecdir = @libexecdir@ +-datadir = @datadir@ +-sysconfdir = @sysconfdir@ +-sharedstatedir = @sharedstatedir@ +-localstatedir = @localstatedir@ +-libdir = @libdir@ +-infodir = @infodir@ +-mandir = @mandir@ +-includedir = @includedir@ +-oldincludedir = /usr/include +- +-DESTDIR = +- + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ +- + top_builddir = ../.. +- +-ACLOCAL = @ACLOCAL@ +-AUTOCONF = @AUTOCONF@ +-AUTOMAKE = @AUTOMAKE@ +-AUTOHEADER = @AUTOHEADER@ +- ++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + INSTALL = @INSTALL@ +-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +-INSTALL_DATA = @INSTALL_DATA@ +-INSTALL_SCRIPT = @INSTALL_SCRIPT@ +-transform = @program_transform_name@ +- ++install_sh_DATA = $(install_sh) -c -m 644 ++install_sh_PROGRAM = $(install_sh) -c ++install_sh_SCRIPT = $(install_sh) -c ++INSTALL_HEADER = $(INSTALL_DATA) ++transform = $(program_transform_name) + NORMAL_INSTALL = : + PRE_INSTALL = : + POST_INSTALL = : + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : +-build_alias = @build_alias@ + build_triplet = @build@ +-host_alias = @host_alias@ + host_triplet = @host@ +-target_alias = @target_alias@ + target_triplet = @target@ ++subdir = src/lib ++DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 ++am__aclocal_m4_deps = $(top_srcdir)/configure.in ++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ ++ $(ACLOCAL_M4) ++mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs ++CONFIG_HEADER = $(top_builddir)/config.h ++CONFIG_CLEAN_FILES = ++am__vpath_adj_setup = srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; ++am__vpath_adj = case $$p in \ ++ $(srcdir)/*) f=`echo "$$p" | sed "s|^$$srcdirstrip/||"`;; \ ++ *) f=$$p;; \ ++ esac; ++am__strip_dir = `echo $$p | sed -e 's|^.*/||'`; ++am__installdirs = "$(DESTDIR)$(libdir)" ++libLTLIBRARIES_INSTALL = $(INSTALL) ++LTLIBRARIES = $(lib_LTLIBRARIES) ++am_libatm_la_OBJECTS = text2atm.lo atm2text.lo atmequal.lo sdu2cell.lo \ ++ text2qos.lo qos2text.lo qosequal.lo sap2text.lo text2sap.lo \ ++ sapequal.lo misc.lo ans.lo common.lo diag.lo kptr.lo \ ++ text2ip.lo timer.lo unix.lo ++libatm_la_OBJECTS = $(am_libatm_la_OBJECTS) ++DEFAULT_INCLUDES = -I. -I$(srcdir) -I$(top_builddir) ++depcomp = $(SHELL) $(top_srcdir)/depcomp ++am__depfiles_maybe = depfiles ++COMPILE = $(CC) $(DEFS) $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) \ ++ $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) ++LTCOMPILE = $(LIBTOOL) --tag=CC --mode=compile $(CC) $(DEFS) \ ++ $(DEFAULT_INCLUDES) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) \ ++ $(AM_CFLAGS) $(CFLAGS) ++CCLD = $(CC) ++LINK = $(LIBTOOL) --tag=CC --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) \ ++ $(AM_LDFLAGS) $(LDFLAGS) -o $@ ++SOURCES = $(libatm_la_SOURCES) ++DIST_SOURCES = $(libatm_la_SOURCES) ++ETAGS = etags ++CTAGS = ctags ++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++ACLOCAL = @ACLOCAL@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ ++AMTAR = @AMTAR@ + AR = @AR@ +-AS = @AS@ ++AUTOCONF = @AUTOCONF@ ++AUTOHEADER = @AUTOHEADER@ ++AUTOMAKE = @AUTOMAKE@ ++AWK = @AWK@ + CC = @CC@ ++CCDEPMODE = @CCDEPMODE@ ++CFLAGS = @CFLAGS@ ++CPP = @CPP@ ++CPPFLAGS = @CPPFLAGS@ + CXX = @CXX@ + CXXCPP = @CXXCPP@ +-DLLTOOL = @DLLTOOL@ ++CXXDEPMODE = @CXXDEPMODE@ ++CXXFLAGS = @CXXFLAGS@ ++CYGPATH_W = @CYGPATH_W@ ++DEFS = @DEFS@ ++DEPDIR = @DEPDIR@ + ECHO = @ECHO@ ++ECHO_C = @ECHO_C@ ++ECHO_N = @ECHO_N@ ++ECHO_T = @ECHO_T@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ + F77 = @F77@ +-GCJ = @GCJ@ +-GCJFLAGS = @GCJFLAGS@ +-HAVE_LIB = @HAVE_LIB@ ++FFLAGS = @FFLAGS@ ++GREP = @GREP@ ++INSTALL_DATA = @INSTALL_DATA@ ++INSTALL_PROGRAM = @INSTALL_PROGRAM@ ++INSTALL_SCRIPT = @INSTALL_SCRIPT@ ++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ ++LDFLAGS = @LDFLAGS@ + LEX = @LEX@ +-LIB = @LIB@ ++LEXLIB = @LEXLIB@ ++LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ ++LIBOBJS = @LIBOBJS@ ++LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBTOOL_DEPS = @LIBTOOL_DEPS@ + LIBVER_AGE = @LIBVER_AGE@ + LIBVER_CURRENT = @LIBVER_CURRENT@ + LIBVER_REVISION = @LIBVER_REVISION@ + LN_S = @LN_S@ +-LTLIB = @LTLIB@ ++LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-OBJDUMP = @OBJDUMP@ + OBJEXT = @OBJEXT@ + PACKAGE = @PACKAGE@ ++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ ++PACKAGE_NAME = @PACKAGE_NAME@ ++PACKAGE_STRING = @PACKAGE_STRING@ ++PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_VERSION = @PACKAGE_VERSION@ ++PATH_SEPARATOR = @PATH_SEPARATOR@ + PERL = @PERL@ + RANLIB = @RANLIB@ +-RC = @RC@ ++SET_MAKE = @SET_MAKE@ ++SHELL = @SHELL@ + STRIP = @STRIP@ + VERSION = @VERSION@ + YACC = @YACC@ ++YFLAGS = @YFLAGS@ ++ac_ct_CC = @ac_ct_CC@ ++ac_ct_CXX = @ac_ct_CXX@ ++ac_ct_F77 = @ac_ct_F77@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ ++am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ ++am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ ++am__include = @am__include@ ++am__leading_dot = @am__leading_dot@ ++am__quote = @am__quote@ ++am__tar = @am__tar@ ++am__untar = @am__untar@ ++bindir = @bindir@ ++build = @build@ ++build_alias = @build_alias@ ++build_cpu = @build_cpu@ ++build_os = @build_os@ ++build_vendor = @build_vendor@ ++datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ ++exec_prefix = @exec_prefix@ ++host = @host@ ++host_alias = @host_alias@ ++host_cpu = @host_cpu@ ++host_os = @host_os@ ++host_vendor = @host_vendor@ ++htmldir = @htmldir@ ++includedir = @includedir@ ++infodir = @infodir@ ++install_sh = @install_sh@ ++libdir = @libdir@ ++libexecdir = @libexecdir@ ++localedir = @localedir@ ++localstatedir = @localstatedir@ ++mandir = @mandir@ ++mkdir_p = @mkdir_p@ ++oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ ++prefix = @prefix@ ++program_transform_name = @program_transform_name@ ++psdir = @psdir@ ++sbindir = @sbindir@ ++sharedstatedir = @sharedstatedir@ ++sysconfdir = @sysconfdir@ ++target = @target@ ++target_alias = @target_alias@ ++target_cpu = @target_cpu@ ++target_os = @target_os@ ++target_vendor = @target_vendor@ + ++#lib_LTLIBRARIES = libatm.la libatmd.la + lib_LTLIBRARIES = libatm.la + + # ATMLIBS_VERSION comes from configure.in in the toplevel directory +-LDFLAGS = -version-info @LIBVER_CURRENT@:@LIBVER_REVISION@:@LIBVER_AGE@ +- +-libatm_la_SOURCES = text2atm.c atm2text.c atmequal.c sdu2cell.c text2qos.c qos2text.c qosequal.c sap2text.c text2sap.c sapequal.c misc.c atmres.h ans.c common.c diag.c kptr.c text2ip.c timer.c unix.c ++AM_LDFLAGS = -version-info @LIBVER_CURRENT@:@LIBVER_REVISION@:@LIBVER_AGE@ ++libatm_la_SOURCES = text2atm.c atm2text.c atmequal.c sdu2cell.c text2qos.c \ ++ qos2text.c qosequal.c sap2text.c text2sap.c sapequal.c \ ++ misc.c atmres.h ans.c \ ++ common.c diag.c kptr.c text2ip.c timer.c unix.c + + libatm_la_LIBADD = -lresolv +-libatm_la_DEPENDENCIES = $(top_builddir)/src/include/atm.h $(top_builddir)/src/include/atmsap.h $(top_builddir)/src/include/stdint.h $(top_builddir)/src/include/atmd.h +- +-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +-CONFIG_HEADER = ../../config.h +-CONFIG_CLEAN_FILES = +-LTLIBRARIES = $(lib_LTLIBRARIES) +- +- +-DEFS = @DEFS@ -I. -I$(srcdir) -I../.. +-CPPFLAGS = @CPPFLAGS@ +-LIBS = @LIBS@ +-libatm_la_LDFLAGS = +-libatm_la_OBJECTS = text2atm.lo atm2text.lo atmequal.lo sdu2cell.lo \ +-text2qos.lo qos2text.lo qosequal.lo sap2text.lo text2sap.lo sapequal.lo \ +-misc.lo ans.lo common.lo diag.lo kptr.lo text2ip.lo timer.lo unix.lo +-CFLAGS = @CFLAGS@ +-COMPILE = $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +-LTCOMPILE = $(LIBTOOL) --mode=compile $(CC) $(DEFS) $(INCLUDES) $(AM_CPPFLAGS) $(CPPFLAGS) $(AM_CFLAGS) $(CFLAGS) +-CCLD = $(CC) +-LINK = $(LIBTOOL) --mode=link $(CCLD) $(AM_CFLAGS) $(CFLAGS) $(LDFLAGS) -o $@ +-DIST_COMMON = Makefile.am Makefile.in +- ++libatm_la_DEPENDENCIES = $(top_builddir)/src/include/atm.h \ ++ $(top_builddir)/src/include/atmsap.h \ ++ $(top_builddir)/src/include/stdint.h \ ++ $(top_builddir)/src/include/atmd.h + +-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) ++all: all-am + +-TAR = tar +-GZIP_ENV = --best +-DEP_FILES = .deps/ans.P .deps/atm2text.P .deps/atmequal.P \ +-.deps/common.P .deps/diag.P .deps/kptr.P .deps/misc.P .deps/qos2text.P \ +-.deps/qosequal.P .deps/sap2text.P .deps/sapequal.P .deps/sdu2cell.P \ +-.deps/text2atm.P .deps/text2ip.P .deps/text2qos.P .deps/text2sap.P \ +-.deps/timer.P .deps/unix.P +-SOURCES = $(libatm_la_SOURCES) +-OBJECTS = $(libatm_la_OBJECTS) +- +-all: all-redirect + .SUFFIXES: +-.SUFFIXES: .S .c .lo .o .obj .s +-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) +- cd $(top_srcdir) && $(AUTOMAKE) --gnu src/lib/Makefile +- +-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) +- cd $(top_builddir) \ +- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status +- +- +-mostlyclean-libLTLIBRARIES: +- +-clean-libLTLIBRARIES: +- -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) +- +-distclean-libLTLIBRARIES: +- +-maintainer-clean-libLTLIBRARIES: +- ++.SUFFIXES: .c .lo .o .obj ++$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) ++ @for dep in $?; do \ ++ case '$(am__configure_deps)' in \ ++ *$$dep*) \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ ++ && exit 0; \ ++ exit 1;; \ ++ esac; \ ++ done; \ ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/lib/Makefile'; \ ++ cd $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu src/lib/Makefile ++.PRECIOUS: Makefile ++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ++ @case '$?' in \ ++ *config.status*) \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ ++ *) \ ++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ ++ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ ++ esac; ++ ++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++ ++$(top_srcdir)/configure: $(am__configure_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(ACLOCAL_M4): $(am__aclocal_m4_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + install-libLTLIBRARIES: $(lib_LTLIBRARIES) + @$(NORMAL_INSTALL) +- $(mkinstalldirs) $(DESTDIR)$(libdir) ++ test -z "$(libdir)" || $(mkdir_p) "$(DESTDIR)$(libdir)" + @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ + if test -f $$p; then \ +- echo "$(LIBTOOL) --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p"; \ +- $(LIBTOOL) --mode=install $(INSTALL) $$p $(DESTDIR)$(libdir)/$$p; \ ++ f=$(am__strip_dir) \ ++ echo " $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) '$$p' '$(DESTDIR)$(libdir)/$$f'"; \ ++ $(LIBTOOL) --mode=install $(libLTLIBRARIES_INSTALL) $(INSTALL_STRIP_FLAG) "$$p" "$(DESTDIR)$(libdir)/$$f"; \ + else :; fi; \ + done + + uninstall-libLTLIBRARIES: + @$(NORMAL_UNINSTALL) +- list='$(lib_LTLIBRARIES)'; for p in $$list; do \ +- $(LIBTOOL) --mode=uninstall rm -f $(DESTDIR)$(libdir)/$$p; \ ++ @set -x; list='$(lib_LTLIBRARIES)'; for p in $$list; do \ ++ p=$(am__strip_dir) \ ++ echo " $(LIBTOOL) --mode=uninstall rm -f '$(DESTDIR)$(libdir)/$$p'"; \ ++ $(LIBTOOL) --mode=uninstall rm -f "$(DESTDIR)$(libdir)/$$p"; \ + done + +-# FIXME: We should only use cygpath when building on Windows, +-# and only if it is available. +-.c.obj: +- $(COMPILE) -c `cygpath -w $<` +- +-.s.o: +- $(COMPILE) -c $< +- +-.S.o: +- $(COMPILE) -c $< ++clean-libLTLIBRARIES: ++ -test -z "$(lib_LTLIBRARIES)" || rm -f $(lib_LTLIBRARIES) ++ @list='$(lib_LTLIBRARIES)'; for p in $$list; do \ ++ dir="`echo $$p | sed -e 's|/[^/]*$$||'`"; \ ++ test "$$dir" != "$$p" || dir=.; \ ++ echo "rm -f \"$${dir}/so_locations\""; \ ++ rm -f "$${dir}/so_locations"; \ ++ done ++libatm.la: $(libatm_la_OBJECTS) $(libatm_la_DEPENDENCIES) ++ $(LINK) -rpath $(libdir) $(libatm_la_LDFLAGS) $(libatm_la_OBJECTS) $(libatm_la_LIBADD) $(LIBS) + + mostlyclean-compile: +- -rm -f *.o core *.core + -rm -f *.$(OBJEXT) + +-clean-compile: +- + distclean-compile: + -rm -f *.tab.c + +-maintainer-clean-compile: +- +-.s.lo: +- $(LIBTOOL) --mode=compile $(COMPILE) -c $< ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/ans.Plo@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/atm2text.Plo@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/atmequal.Plo@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/common.Plo@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/diag.Plo@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/kptr.Plo@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/misc.Plo@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qos2text.Plo@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/qosequal.Plo@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sap2text.Plo@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sapequal.Plo@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/sdu2cell.Plo@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/text2atm.Plo@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/text2ip.Plo@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/text2qos.Plo@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/text2sap.Plo@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/timer.Plo@am__quote@ ++@AMDEP_TRUE@@am__include@ @am__quote@./$(DEPDIR)/unix.Plo@am__quote@ ++ ++.c.o: ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@am__fastdepCC_FALSE@ $(COMPILE) -c $< + +-.S.lo: +- $(LIBTOOL) --mode=compile $(COMPILE) -c $< ++.c.obj: ++@am__fastdepCC_TRUE@ if $(COMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ `$(CYGPATH_W) '$<'`; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Po"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=no @AMDEPBACKSLASH@ ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@am__fastdepCC_FALSE@ $(COMPILE) -c `$(CYGPATH_W) '$<'` ++ ++.c.lo: ++@am__fastdepCC_TRUE@ if $(LTCOMPILE) -MT $@ -MD -MP -MF "$(DEPDIR)/$*.Tpo" -c -o $@ $<; \ ++@am__fastdepCC_TRUE@ then mv -f "$(DEPDIR)/$*.Tpo" "$(DEPDIR)/$*.Plo"; else rm -f "$(DEPDIR)/$*.Tpo"; exit 1; fi ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ source='$<' object='$@' libtool=yes @AMDEPBACKSLASH@ ++@AMDEP_TRUE@@am__fastdepCC_FALSE@ DEPDIR=$(DEPDIR) $(CCDEPMODE) $(depcomp) @AMDEPBACKSLASH@ ++@am__fastdepCC_FALSE@ $(LTCOMPILE) -c -o $@ $< + + mostlyclean-libtool: + -rm -f *.lo +@@ -212,169 +324,178 @@ + -rm -rf .libs _libs + + distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + +-maintainer-clean-libtool: +- +-libatm.la: $(libatm_la_OBJECTS) $(libatm_la_DEPENDENCIES) +- $(LINK) -rpath $(libdir) $(libatm_la_LDFLAGS) $(libatm_la_OBJECTS) $(libatm_la_LIBADD) $(LIBS) +- ++ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) ++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ ++ mkid -fID $$unique + tags: TAGS + +-ID: $(HEADERS) $(SOURCES) $(LISP) +- list='$(SOURCES) $(HEADERS)'; \ +- unique=`for i in $$list; do echo $$i; done | \ +- awk ' { files[$$0] = 1; } \ ++TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ ++ $(TAGS_FILES) $(LISP) ++ tags=; \ ++ here=`pwd`; \ ++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | \ ++ $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ +- here=`pwd` && cd $(srcdir) \ +- && mkid -f$$here/ID $$unique $(LISP) +- +-TAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) ++ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ test -n "$$unique" || unique=$$empty_fix; \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$tags $$unique; \ ++ fi ++ctags: CTAGS ++CTAGS: $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ ++ $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ +- list='$(SOURCES) $(HEADERS)'; \ +- unique=`for i in $$list; do echo $$i; done | \ +- awk ' { files[$$0] = 1; } \ ++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | \ ++ $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ +- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ +- || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP)) +- +-mostlyclean-tags: +- +-clean-tags: ++ test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ ++ $$tags $$unique ++ ++GTAGS: ++ here=`$(am__cd) $(top_builddir) && pwd` \ ++ && cd $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) $$here + + distclean-tags: +- -rm -f TAGS ID +- +-maintainer-clean-tags: +- +-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) +- +-subdir = src/lib ++ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) +- here=`cd $(top_builddir) && pwd`; \ +- top_distdir=`cd $(top_distdir) && pwd`; \ +- distdir=`cd $(distdir) && pwd`; \ +- cd $(top_srcdir) \ +- && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/lib/Makefile +- @for file in $(DISTFILES); do \ +- d=$(srcdir); \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ ++ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- cp -pr $$d/$$file $(distdir)/$$file; \ ++ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ ++ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ fi; \ ++ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ +- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ +- || cp -p $$d/$$file $(distdir)/$$file || :; \ ++ || cp -p $$d/$$file $(distdir)/$$file \ ++ || exit 1; \ + fi; \ + done +- +-DEPS_MAGIC := $(shell mkdir .deps > /dev/null 2>&1 || :) +- +--include $(DEP_FILES) +- +-mostlyclean-depend: +- +-clean-depend: +- +-distclean-depend: +- -rm -rf .deps +- +-maintainer-clean-depend: +- +-%.o: %.c +- @echo '$(COMPILE) -c $<'; \ +- $(COMPILE) -Wp,-MD,.deps/$(*F).pp -c $< +- @-cp .deps/$(*F).pp .deps/$(*F).P; \ +- tr ' ' '\012' < .deps/$(*F).pp \ +- | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ +- >> .deps/$(*F).P; \ +- rm .deps/$(*F).pp +- +-%.lo: %.c +- @echo '$(LTCOMPILE) -c $<'; \ +- $(LTCOMPILE) -Wp,-MD,.deps/$(*F).pp -c $< +- @-sed -e 's/^\([^:]*\)\.o[ ]*:/\1.lo \1.o :/' \ +- < .deps/$(*F).pp > .deps/$(*F).P; \ +- tr ' ' '\012' < .deps/$(*F).pp \ +- | sed -e 's/^\\$$//' -e '/^$$/ d' -e '/:$$/ d' -e 's/$$/ :/' \ +- >> .deps/$(*F).P; \ +- rm -f .deps/$(*F).pp +-info-am: +-info: info-am +-dvi-am: +-dvi: dvi-am + check-am: all-am + check: check-am +-installcheck-am: +-installcheck: installcheck-am +-install-exec-am: install-libLTLIBRARIES ++all-am: Makefile $(LTLIBRARIES) ++installdirs: ++ for dir in "$(DESTDIR)$(libdir)"; do \ ++ test -z "$$dir" || $(mkdir_p) "$$dir"; \ ++ done ++install: install-am + install-exec: install-exec-am +- +-install-data-am: + install-data: install-data-am ++uninstall: uninstall-am + + install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +-install: install-am +-uninstall-am: uninstall-libLTLIBRARIES +-uninstall: uninstall-am +-all-am: Makefile $(LTLIBRARIES) +-all-redirect: all-am +-install-strip: +- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +-installdirs: +- $(mkinstalldirs) $(DESTDIR)$(libdir) +- + ++installcheck: installcheck-am ++install-strip: ++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ ++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ ++ `test -z '$(STRIP)' || \ ++ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + mostlyclean-generic: + + clean-generic: + + distclean-generic: +- -rm -f Makefile $(CONFIG_CLEAN_FILES) +- -rm -f config.cache config.log stamp-h stamp-h[0-9]* ++ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + + maintainer-clean-generic: +-mostlyclean-am: mostlyclean-libLTLIBRARIES mostlyclean-compile \ +- mostlyclean-libtool mostlyclean-tags mostlyclean-depend \ +- mostlyclean-generic ++ @echo "This command is intended for maintainers to use" ++ @echo "it deletes files that may require special tools to rebuild." ++clean: clean-am + +-mostlyclean: mostlyclean-am ++clean-am: clean-generic clean-libLTLIBRARIES clean-libtool \ ++ mostlyclean-am + +-clean-am: clean-libLTLIBRARIES clean-compile clean-libtool clean-tags \ +- clean-depend clean-generic mostlyclean-am ++distclean: distclean-am ++ -rm -rf ./$(DEPDIR) ++ -rm -f Makefile ++distclean-am: clean-am distclean-compile distclean-generic \ ++ distclean-libtool distclean-tags + +-clean: clean-am ++dvi: dvi-am + +-distclean-am: distclean-libLTLIBRARIES distclean-compile \ +- distclean-libtool distclean-tags distclean-depend \ +- distclean-generic clean-am +- -rm -f libtool ++dvi-am: + +-distclean: distclean-am ++html: html-am + +-maintainer-clean-am: maintainer-clean-libLTLIBRARIES \ +- maintainer-clean-compile maintainer-clean-libtool \ +- maintainer-clean-tags maintainer-clean-depend \ +- maintainer-clean-generic distclean-am +- @echo "This command is intended for maintainers to use;" +- @echo "it deletes files that may require special tools to rebuild." ++info: info-am ++ ++info-am: ++ ++install-data-am: ++ ++install-exec-am: install-libLTLIBRARIES ++ ++install-info: install-info-am ++ ++install-man: ++ ++installcheck-am: + + maintainer-clean: maintainer-clean-am ++ -rm -rf ./$(DEPDIR) ++ -rm -f Makefile ++maintainer-clean-am: distclean-am maintainer-clean-generic ++ ++mostlyclean: mostlyclean-am + +-.PHONY: mostlyclean-libLTLIBRARIES distclean-libLTLIBRARIES \ +-clean-libLTLIBRARIES maintainer-clean-libLTLIBRARIES \ +-uninstall-libLTLIBRARIES install-libLTLIBRARIES mostlyclean-compile \ +-distclean-compile clean-compile maintainer-clean-compile \ +-mostlyclean-libtool distclean-libtool clean-libtool \ +-maintainer-clean-libtool tags mostlyclean-tags distclean-tags \ +-clean-tags maintainer-clean-tags distdir mostlyclean-depend \ +-distclean-depend clean-depend maintainer-clean-depend info-am info \ +-dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ +-install-exec install-data-am install-data install-am install \ +-uninstall-am uninstall all-redirect all-am all installdirs \ +-mostlyclean-generic distclean-generic clean-generic \ +-maintainer-clean-generic clean mostlyclean distclean maintainer-clean ++mostlyclean-am: mostlyclean-compile mostlyclean-generic \ ++ mostlyclean-libtool ++ ++pdf: pdf-am ++ ++pdf-am: ++ ++ps: ps-am ++ ++ps-am: ++ ++uninstall-am: uninstall-info-am uninstall-libLTLIBRARIES ++ ++.PHONY: CTAGS GTAGS all all-am check check-am clean clean-generic \ ++ clean-libLTLIBRARIES clean-libtool ctags distclean \ ++ distclean-compile distclean-generic distclean-libtool \ ++ distclean-tags distdir dvi dvi-am html html-am info info-am \ ++ install install-am install-data install-data-am install-exec \ ++ install-exec-am install-info install-info-am \ ++ install-libLTLIBRARIES install-man install-strip installcheck \ ++ installcheck-am installdirs maintainer-clean \ ++ maintainer-clean-generic mostlyclean mostlyclean-compile \ ++ mostlyclean-generic mostlyclean-libtool pdf pdf-am ps ps-am \ ++ tags uninstall uninstall-am uninstall-info-am \ ++ uninstall-libLTLIBRARIES + + + #libatm_la_SOURCES = text2atm.c atm2text.c atmequal.c sdu2cell.c text2qos.c \ +@@ -389,7 +510,6 @@ + #libatmd_la_DEPENDENCIES = $(top_builddir)/src/include/atm.h \ + # $(top_builddir)/src/include/atmd.h \ + # $(top_builddir)/src/include/stdint.h +- + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded. + .NOEXPORT: +Index: linux-atm-2.4.1/src/Makefile.in +=================================================================== +--- linux-atm-2.4.1.orig/src/Makefile.in 2007-10-20 21:45:35.786871805 +0200 ++++ linux-atm-2.4.1/src/Makefile.in 2007-10-20 21:45:44.327358500 +0200 +@@ -1,6 +1,8 @@ +-# Makefile.in generated automatically by automake 1.4-p6 from Makefile.am ++# Makefile.in generated by automake 1.9.6 from Makefile.am. ++# @configure_input@ + +-# Copyright (C) 1994, 1995-8, 1999, 2001 Free Software Foundation, Inc. ++# Copyright (C) 1994, 1995, 1996, 1997, 1998, 1999, 2000, 2001, 2002, ++# 2003, 2004, 2005 Free Software Foundation, Inc. + # This Makefile.in is free software; the Free Software Foundation + # gives unlimited permission to copy and/or distribute it, + # with or without modifications, as long as this notice is preserved. +@@ -10,112 +12,209 @@ + # even the implied warranty of MERCHANTABILITY or FITNESS FOR A + # PARTICULAR PURPOSE. + +- +-SHELL = @SHELL@ +- ++@SET_MAKE@ + srcdir = @srcdir@ + top_srcdir = @top_srcdir@ + VPATH = @srcdir@ +-prefix = @prefix@ +-exec_prefix = @exec_prefix@ +- +-bindir = @bindir@ +-sbindir = @sbindir@ +-libexecdir = @libexecdir@ +-datadir = @datadir@ +-sysconfdir = @sysconfdir@ +-sharedstatedir = @sharedstatedir@ +-localstatedir = @localstatedir@ +-libdir = @libdir@ +-infodir = @infodir@ +-mandir = @mandir@ +-includedir = @includedir@ +-oldincludedir = /usr/include +- +-DESTDIR = +- + pkgdatadir = $(datadir)/@PACKAGE@ + pkglibdir = $(libdir)/@PACKAGE@ + pkgincludedir = $(includedir)/@PACKAGE@ +- + top_builddir = .. +- +-ACLOCAL = @ACLOCAL@ +-AUTOCONF = @AUTOCONF@ +-AUTOMAKE = @AUTOMAKE@ +-AUTOHEADER = @AUTOHEADER@ +- ++am__cd = CDPATH="$${ZSH_VERSION+.}$(PATH_SEPARATOR)" && cd + INSTALL = @INSTALL@ +-INSTALL_PROGRAM = @INSTALL_PROGRAM@ $(AM_INSTALL_PROGRAM_FLAGS) +-INSTALL_DATA = @INSTALL_DATA@ +-INSTALL_SCRIPT = @INSTALL_SCRIPT@ +-transform = @program_transform_name@ +- ++install_sh_DATA = $(install_sh) -c -m 644 ++install_sh_PROGRAM = $(install_sh) -c ++install_sh_SCRIPT = $(install_sh) -c ++INSTALL_HEADER = $(INSTALL_DATA) ++transform = $(program_transform_name) + NORMAL_INSTALL = : + PRE_INSTALL = : + POST_INSTALL = : + NORMAL_UNINSTALL = : + PRE_UNINSTALL = : + POST_UNINSTALL = : +-build_alias = @build_alias@ + build_triplet = @build@ +-host_alias = @host_alias@ + host_triplet = @host@ +-target_alias = @target_alias@ + target_triplet = @target@ ++subdir = src ++DIST_COMMON = $(srcdir)/Makefile.am $(srcdir)/Makefile.in ++ACLOCAL_M4 = $(top_srcdir)/aclocal.m4 ++am__aclocal_m4_deps = $(top_srcdir)/configure.in ++am__configure_deps = $(am__aclocal_m4_deps) $(CONFIGURE_DEPENDENCIES) \ ++ $(ACLOCAL_M4) ++mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs ++CONFIG_HEADER = $(top_builddir)/config.h ++CONFIG_CLEAN_FILES = ++SOURCES = ++DIST_SOURCES = ++RECURSIVE_TARGETS = all-recursive check-recursive dvi-recursive \ ++ html-recursive info-recursive install-data-recursive \ ++ install-exec-recursive install-info-recursive \ ++ install-recursive installcheck-recursive installdirs-recursive \ ++ pdf-recursive ps-recursive uninstall-info-recursive \ ++ uninstall-recursive ++ETAGS = etags ++CTAGS = ctags ++DIST_SUBDIRS = $(SUBDIRS) ++DISTFILES = $(DIST_COMMON) $(DIST_SOURCES) $(TEXINFOS) $(EXTRA_DIST) ++ACLOCAL = @ACLOCAL@ ++AMDEP_FALSE = @AMDEP_FALSE@ ++AMDEP_TRUE = @AMDEP_TRUE@ ++AMTAR = @AMTAR@ + AR = @AR@ +-AS = @AS@ ++AUTOCONF = @AUTOCONF@ ++AUTOHEADER = @AUTOHEADER@ ++AUTOMAKE = @AUTOMAKE@ ++AWK = @AWK@ + CC = @CC@ ++CCDEPMODE = @CCDEPMODE@ ++CFLAGS = @CFLAGS@ ++CPP = @CPP@ ++CPPFLAGS = @CPPFLAGS@ + CXX = @CXX@ + CXXCPP = @CXXCPP@ +-DLLTOOL = @DLLTOOL@ ++CXXDEPMODE = @CXXDEPMODE@ ++CXXFLAGS = @CXXFLAGS@ ++CYGPATH_W = @CYGPATH_W@ ++DEFS = @DEFS@ ++DEPDIR = @DEPDIR@ + ECHO = @ECHO@ ++ECHO_C = @ECHO_C@ ++ECHO_N = @ECHO_N@ ++ECHO_T = @ECHO_T@ + EGREP = @EGREP@ + EXEEXT = @EXEEXT@ + F77 = @F77@ +-GCJ = @GCJ@ +-GCJFLAGS = @GCJFLAGS@ +-HAVE_LIB = @HAVE_LIB@ ++FFLAGS = @FFLAGS@ ++GREP = @GREP@ ++INSTALL_DATA = @INSTALL_DATA@ ++INSTALL_PROGRAM = @INSTALL_PROGRAM@ ++INSTALL_SCRIPT = @INSTALL_SCRIPT@ ++INSTALL_STRIP_PROGRAM = @INSTALL_STRIP_PROGRAM@ ++LDFLAGS = @LDFLAGS@ + LEX = @LEX@ +-LIB = @LIB@ ++LEXLIB = @LEXLIB@ ++LEX_OUTPUT_ROOT = @LEX_OUTPUT_ROOT@ ++LIBOBJS = @LIBOBJS@ ++LIBS = @LIBS@ + LIBTOOL = @LIBTOOL@ + LIBTOOL_DEPS = @LIBTOOL_DEPS@ + LIBVER_AGE = @LIBVER_AGE@ + LIBVER_CURRENT = @LIBVER_CURRENT@ + LIBVER_REVISION = @LIBVER_REVISION@ + LN_S = @LN_S@ +-LTLIB = @LTLIB@ ++LTLIBOBJS = @LTLIBOBJS@ + MAKEINFO = @MAKEINFO@ +-OBJDUMP = @OBJDUMP@ + OBJEXT = @OBJEXT@ + PACKAGE = @PACKAGE@ ++PACKAGE_BUGREPORT = @PACKAGE_BUGREPORT@ ++PACKAGE_NAME = @PACKAGE_NAME@ ++PACKAGE_STRING = @PACKAGE_STRING@ ++PACKAGE_TARNAME = @PACKAGE_TARNAME@ ++PACKAGE_VERSION = @PACKAGE_VERSION@ ++PATH_SEPARATOR = @PATH_SEPARATOR@ + PERL = @PERL@ + RANLIB = @RANLIB@ +-RC = @RC@ ++SET_MAKE = @SET_MAKE@ ++SHELL = @SHELL@ + STRIP = @STRIP@ + VERSION = @VERSION@ + YACC = @YACC@ +- ++YFLAGS = @YFLAGS@ ++ac_ct_CC = @ac_ct_CC@ ++ac_ct_CXX = @ac_ct_CXX@ ++ac_ct_F77 = @ac_ct_F77@ ++am__fastdepCC_FALSE = @am__fastdepCC_FALSE@ ++am__fastdepCC_TRUE = @am__fastdepCC_TRUE@ ++am__fastdepCXX_FALSE = @am__fastdepCXX_FALSE@ ++am__fastdepCXX_TRUE = @am__fastdepCXX_TRUE@ ++am__include = @am__include@ ++am__leading_dot = @am__leading_dot@ ++am__quote = @am__quote@ ++am__tar = @am__tar@ ++am__untar = @am__untar@ ++bindir = @bindir@ ++build = @build@ ++build_alias = @build_alias@ ++build_cpu = @build_cpu@ ++build_os = @build_os@ ++build_vendor = @build_vendor@ ++datadir = @datadir@ ++datarootdir = @datarootdir@ ++docdir = @docdir@ ++dvidir = @dvidir@ ++exec_prefix = @exec_prefix@ ++host = @host@ ++host_alias = @host_alias@ ++host_cpu = @host_cpu@ ++host_os = @host_os@ ++host_vendor = @host_vendor@ ++htmldir = @htmldir@ ++includedir = @includedir@ ++infodir = @infodir@ ++install_sh = @install_sh@ ++libdir = @libdir@ ++libexecdir = @libexecdir@ ++localedir = @localedir@ ++localstatedir = @localstatedir@ ++mandir = @mandir@ ++mkdir_p = @mkdir_p@ ++oldincludedir = @oldincludedir@ ++pdfdir = @pdfdir@ ++prefix = @prefix@ ++program_transform_name = @program_transform_name@ ++psdir = @psdir@ ++sbindir = @sbindir@ ++sharedstatedir = @sharedstatedir@ ++sysconfdir = @sysconfdir@ ++target = @target@ ++target_alias = @target_alias@ ++target_cpu = @target_cpu@ ++target_os = @target_os@ ++target_vendor = @target_vendor@ + SUBDIRS = include lib arpd +-mkinstalldirs = $(SHELL) $(top_srcdir)/mkinstalldirs +-CONFIG_HEADER = ../config.h +-CONFIG_CLEAN_FILES = +-DIST_COMMON = Makefile.am Makefile.in +- ++all: all-recursive + +-DISTFILES = $(DIST_COMMON) $(SOURCES) $(HEADERS) $(TEXINFOS) $(EXTRA_DIST) +- +-TAR = tar +-GZIP_ENV = --best +-all: all-redirect + .SUFFIXES: +-$(srcdir)/Makefile.in: Makefile.am $(top_srcdir)/configure.in $(ACLOCAL_M4) +- cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile ++$(srcdir)/Makefile.in: $(srcdir)/Makefile.am $(am__configure_deps) ++ @for dep in $?; do \ ++ case '$(am__configure_deps)' in \ ++ *$$dep*) \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh \ ++ && exit 0; \ ++ exit 1;; \ ++ esac; \ ++ done; \ ++ echo ' cd $(top_srcdir) && $(AUTOMAKE) --gnu src/Makefile'; \ ++ cd $(top_srcdir) && \ ++ $(AUTOMAKE) --gnu src/Makefile ++.PRECIOUS: Makefile ++Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status ++ @case '$?' in \ ++ *config.status*) \ ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh;; \ ++ *) \ ++ echo ' cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe)'; \ ++ cd $(top_builddir) && $(SHELL) ./config.status $(subdir)/$@ $(am__depfiles_maybe);; \ ++ esac; ++ ++$(top_builddir)/config.status: $(top_srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++ ++$(top_srcdir)/configure: $(am__configure_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh ++$(ACLOCAL_M4): $(am__aclocal_m4_deps) ++ cd $(top_builddir) && $(MAKE) $(AM_MAKEFLAGS) am--refresh + +-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status $(BUILT_SOURCES) +- cd $(top_builddir) \ +- && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status ++mostlyclean-libtool: ++ -rm -f *.lo + ++clean-libtool: ++ -rm -rf .libs _libs ++ ++distclean-libtool: ++ -rm -f libtool ++uninstall-info-am: + + # This directory's subdirectories are mostly independent; you can cd + # into them and run `make' without going through this Makefile. +@@ -123,13 +222,14 @@ + # (1) if the variable is set in `config.status', edit `config.status' + # (which will cause the Makefiles to be regenerated when you run `make'); + # (2) otherwise, pass the desired values on the `make' command line. +- +-@SET_MAKE@ +- +-all-recursive install-data-recursive install-exec-recursive \ +-installdirs-recursive install-recursive uninstall-recursive \ +-check-recursive installcheck-recursive info-recursive dvi-recursive: +- @set fnord $(MAKEFLAGS); amf=$$2; \ ++$(RECURSIVE_TARGETS): ++ @failcom='exit 1'; \ ++ for f in x $$MAKEFLAGS; do \ ++ case $$f in \ ++ *=* | --[!k]*);; \ ++ *k*) failcom='fail=yes';; \ ++ esac; \ ++ done; \ + dot_seen=no; \ + target=`echo $@ | sed s/-recursive//`; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ +@@ -141,7 +241,7 @@ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ +- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ ++ || eval $$failcom; \ + done; \ + if test "$$dot_seen" = "no"; then \ + $(MAKE) $(AM_MAKEFLAGS) "$$target-am" || exit 1; \ +@@ -149,13 +249,24 @@ + + mostlyclean-recursive clean-recursive distclean-recursive \ + maintainer-clean-recursive: +- @set fnord $(MAKEFLAGS); amf=$$2; \ ++ @failcom='exit 1'; \ ++ for f in x $$MAKEFLAGS; do \ ++ case $$f in \ ++ *=* | --[!k]*);; \ ++ *k*) failcom='fail=yes';; \ ++ esac; \ ++ done; \ + dot_seen=no; \ +- rev=''; list='$(SUBDIRS)'; for subdir in $$list; do \ +- rev="$$subdir $$rev"; \ +- test "$$subdir" != "." || dot_seen=yes; \ ++ case "$@" in \ ++ distclean-* | maintainer-clean-*) list='$(DIST_SUBDIRS)' ;; \ ++ *) list='$(SUBDIRS)' ;; \ ++ esac; \ ++ rev=''; for subdir in $$list; do \ ++ if test "$$subdir" = "."; then :; else \ ++ rev="$$subdir $$rev"; \ ++ fi; \ + done; \ +- test "$$dot_seen" = "no" && rev=". $$rev"; \ ++ rev="$$rev ."; \ + target=`echo $@ | sed s/-recursive//`; \ + for subdir in $$rev; do \ + echo "Making $$target in $$subdir"; \ +@@ -165,146 +276,210 @@ + local_target="$$target"; \ + fi; \ + (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) $$local_target) \ +- || case "$$amf" in *=*) exit 1;; *k*) fail=yes;; *) exit 1;; esac; \ ++ || eval $$failcom; \ + done && test -z "$$fail" + tags-recursive: + list='$(SUBDIRS)'; for subdir in $$list; do \ + test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) tags); \ + done ++ctags-recursive: ++ list='$(SUBDIRS)'; for subdir in $$list; do \ ++ test "$$subdir" = . || (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) ctags); \ ++ done + +-tags: TAGS +- +-ID: $(HEADERS) $(SOURCES) $(LISP) +- list='$(SOURCES) $(HEADERS)'; \ +- unique=`for i in $$list; do echo $$i; done | \ +- awk ' { files[$$0] = 1; } \ ++ID: $(HEADERS) $(SOURCES) $(LISP) $(TAGS_FILES) ++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | \ ++ $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ +- here=`pwd` && cd $(srcdir) \ +- && mkid -f$$here/ID $$unique $(LISP) ++ mkid -fID $$unique ++tags: TAGS + +-TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) $(LISP) ++TAGS: tags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ ++ $(TAGS_FILES) $(LISP) + tags=; \ + here=`pwd`; \ ++ if ($(ETAGS) --etags-include --version) >/dev/null 2>&1; then \ ++ include_option=--etags-include; \ ++ empty_fix=.; \ ++ else \ ++ include_option=--include; \ ++ empty_fix=; \ ++ fi; \ + list='$(SUBDIRS)'; for subdir in $$list; do \ +- if test "$$subdir" = .; then :; else \ +- test -f $$subdir/TAGS && tags="$$tags -i $$here/$$subdir/TAGS"; \ +- fi; \ ++ if test "$$subdir" = .; then :; else \ ++ test ! -f $$subdir/TAGS || \ ++ tags="$$tags $$include_option=$$here/$$subdir/TAGS"; \ ++ fi; \ + done; \ +- list='$(SOURCES) $(HEADERS)'; \ +- unique=`for i in $$list; do echo $$i; done | \ +- awk ' { files[$$0] = 1; } \ ++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | \ ++ $(AWK) ' { files[$$0] = 1; } \ + END { for (i in files) print i; }'`; \ +- test -z "$(ETAGS_ARGS)$$unique$(LISP)$$tags" \ +- || (cd $(srcdir) && etags -o $$here/TAGS $(ETAGS_ARGS) $$tags $$unique $(LISP)) +- +-mostlyclean-tags: +- +-clean-tags: ++ if test -z "$(ETAGS_ARGS)$$tags$$unique"; then :; else \ ++ test -n "$$unique" || unique=$$empty_fix; \ ++ $(ETAGS) $(ETAGSFLAGS) $(AM_ETAGSFLAGS) $(ETAGS_ARGS) \ ++ $$tags $$unique; \ ++ fi ++ctags: CTAGS ++CTAGS: ctags-recursive $(HEADERS) $(SOURCES) $(TAGS_DEPENDENCIES) \ ++ $(TAGS_FILES) $(LISP) ++ tags=; \ ++ here=`pwd`; \ ++ list='$(SOURCES) $(HEADERS) $(LISP) $(TAGS_FILES)'; \ ++ unique=`for i in $$list; do \ ++ if test -f "$$i"; then echo $$i; else echo $(srcdir)/$$i; fi; \ ++ done | \ ++ $(AWK) ' { files[$$0] = 1; } \ ++ END { for (i in files) print i; }'`; \ ++ test -z "$(CTAGS_ARGS)$$tags$$unique" \ ++ || $(CTAGS) $(CTAGSFLAGS) $(AM_CTAGSFLAGS) $(CTAGS_ARGS) \ ++ $$tags $$unique ++ ++GTAGS: ++ here=`$(am__cd) $(top_builddir) && pwd` \ ++ && cd $(top_srcdir) \ ++ && gtags -i $(GTAGS_ARGS) $$here + + distclean-tags: +- -rm -f TAGS ID +- +-maintainer-clean-tags: +- +-distdir = $(top_builddir)/$(PACKAGE)-$(VERSION)/$(subdir) +- +-subdir = src ++ -rm -f TAGS ID GTAGS GRTAGS GSYMS GPATH tags + + distdir: $(DISTFILES) +- here=`cd $(top_builddir) && pwd`; \ +- top_distdir=`cd $(top_distdir) && pwd`; \ +- distdir=`cd $(distdir) && pwd`; \ +- cd $(top_srcdir) \ +- && $(AUTOMAKE) --include-deps --build-dir=$$here --srcdir-name=$(top_srcdir) --output-dir=$$top_distdir --gnu src/Makefile +- @for file in $(DISTFILES); do \ +- d=$(srcdir); \ ++ @srcdirstrip=`echo "$(srcdir)" | sed 's|.|.|g'`; \ ++ topsrcdirstrip=`echo "$(top_srcdir)" | sed 's|.|.|g'`; \ ++ list='$(DISTFILES)'; for file in $$list; do \ ++ case $$file in \ ++ $(srcdir)/*) file=`echo "$$file" | sed "s|^$$srcdirstrip/||"`;; \ ++ $(top_srcdir)/*) file=`echo "$$file" | sed "s|^$$topsrcdirstrip/|$(top_builddir)/|"`;; \ ++ esac; \ ++ if test -f $$file || test -d $$file; then d=.; else d=$(srcdir); fi; \ ++ dir=`echo "$$file" | sed -e 's,/[^/]*$$,,'`; \ ++ if test "$$dir" != "$$file" && test "$$dir" != "."; then \ ++ dir="/$$dir"; \ ++ $(mkdir_p) "$(distdir)$$dir"; \ ++ else \ ++ dir=''; \ ++ fi; \ + if test -d $$d/$$file; then \ +- cp -pr $$d/$$file $(distdir)/$$file; \ ++ if test -d $(srcdir)/$$file && test $$d != $(srcdir); then \ ++ cp -pR $(srcdir)/$$file $(distdir)$$dir || exit 1; \ ++ fi; \ ++ cp -pR $$d/$$file $(distdir)$$dir || exit 1; \ + else \ + test -f $(distdir)/$$file \ +- || ln $$d/$$file $(distdir)/$$file 2> /dev/null \ +- || cp -p $$d/$$file $(distdir)/$$file || :; \ ++ || cp -p $$d/$$file $(distdir)/$$file \ ++ || exit 1; \ + fi; \ + done +- for subdir in $(SUBDIRS); do \ ++ list='$(DIST_SUBDIRS)'; for subdir in $$list; do \ + if test "$$subdir" = .; then :; else \ +- test -d $(distdir)/$$subdir \ +- || mkdir $(distdir)/$$subdir \ ++ test -d "$(distdir)/$$subdir" \ ++ || $(mkdir_p) "$(distdir)/$$subdir" \ + || exit 1; \ +- chmod 777 $(distdir)/$$subdir; \ +- (cd $$subdir && $(MAKE) $(AM_MAKEFLAGS) top_distdir=../$(top_distdir) distdir=../$(distdir)/$$subdir distdir) \ ++ distdir=`$(am__cd) $(distdir) && pwd`; \ ++ top_distdir=`$(am__cd) $(top_distdir) && pwd`; \ ++ (cd $$subdir && \ ++ $(MAKE) $(AM_MAKEFLAGS) \ ++ top_distdir="$$top_distdir" \ ++ distdir="$$distdir/$$subdir" \ ++ distdir) \ + || exit 1; \ + fi; \ + done +-info-am: +-info: info-recursive +-dvi-am: +-dvi: dvi-recursive + check-am: all-am + check: check-recursive +-installcheck-am: +-installcheck: installcheck-recursive +-install-exec-am: ++all-am: Makefile ++installdirs: installdirs-recursive ++installdirs-am: ++install: install-recursive + install-exec: install-exec-recursive +- +-install-data-am: + install-data: install-data-recursive ++uninstall: uninstall-recursive + + install-am: all-am + @$(MAKE) $(AM_MAKEFLAGS) install-exec-am install-data-am +-install: install-recursive +-uninstall-am: +-uninstall: uninstall-recursive +-all-am: Makefile +-all-redirect: all-recursive +-install-strip: +- $(MAKE) $(AM_MAKEFLAGS) AM_INSTALL_PROGRAM_FLAGS=-s install +-installdirs: installdirs-recursive +-installdirs-am: +- + ++installcheck: installcheck-recursive ++install-strip: ++ $(MAKE) $(AM_MAKEFLAGS) INSTALL_PROGRAM="$(INSTALL_STRIP_PROGRAM)" \ ++ install_sh_PROGRAM="$(INSTALL_STRIP_PROGRAM)" INSTALL_STRIP_FLAG=-s \ ++ `test -z '$(STRIP)' || \ ++ echo "INSTALL_PROGRAM_ENV=STRIPPROG='$(STRIP)'"` install + mostlyclean-generic: + + clean-generic: + + distclean-generic: +- -rm -f Makefile $(CONFIG_CLEAN_FILES) +- -rm -f config.cache config.log stamp-h stamp-h[0-9]* ++ -test -z "$(CONFIG_CLEAN_FILES)" || rm -f $(CONFIG_CLEAN_FILES) + + maintainer-clean-generic: +-mostlyclean-am: mostlyclean-tags mostlyclean-generic ++ @echo "This command is intended for maintainers to use" ++ @echo "it deletes files that may require special tools to rebuild." ++clean: clean-recursive + +-mostlyclean: mostlyclean-recursive ++clean-am: clean-generic clean-libtool mostlyclean-am + +-clean-am: clean-tags clean-generic mostlyclean-am ++distclean: distclean-recursive ++ -rm -f Makefile ++distclean-am: clean-am distclean-generic distclean-libtool \ ++ distclean-tags + +-clean: clean-recursive ++dvi: dvi-recursive + +-distclean-am: distclean-tags distclean-generic clean-am +- -rm -f libtool ++dvi-am: + +-distclean: distclean-recursive ++html: html-recursive + +-maintainer-clean-am: maintainer-clean-tags maintainer-clean-generic \ +- distclean-am +- @echo "This command is intended for maintainers to use;" +- @echo "it deletes files that may require special tools to rebuild." ++info: info-recursive ++ ++info-am: ++ ++install-data-am: ++ ++install-exec-am: ++ ++install-info: install-info-recursive ++ ++install-man: ++ ++installcheck-am: + + maintainer-clean: maintainer-clean-recursive ++ -rm -f Makefile ++maintainer-clean-am: distclean-am maintainer-clean-generic ++ ++mostlyclean: mostlyclean-recursive ++ ++mostlyclean-am: mostlyclean-generic mostlyclean-libtool ++ ++pdf: pdf-recursive ++ ++pdf-am: ++ ++ps: ps-recursive ++ ++ps-am: ++ ++uninstall-am: uninstall-info-am + +-.PHONY: install-data-recursive uninstall-data-recursive \ +-install-exec-recursive uninstall-exec-recursive installdirs-recursive \ +-uninstalldirs-recursive all-recursive check-recursive \ +-installcheck-recursive info-recursive dvi-recursive \ +-mostlyclean-recursive distclean-recursive clean-recursive \ +-maintainer-clean-recursive tags tags-recursive mostlyclean-tags \ +-distclean-tags clean-tags maintainer-clean-tags distdir info-am info \ +-dvi-am dvi check check-am installcheck-am installcheck install-exec-am \ +-install-exec install-data-am install-data install-am install \ +-uninstall-am uninstall all-redirect all-am all installdirs-am \ +-installdirs mostlyclean-generic distclean-generic clean-generic \ +-maintainer-clean-generic clean mostlyclean distclean maintainer-clean ++uninstall-info: uninstall-info-recursive + ++.PHONY: $(RECURSIVE_TARGETS) CTAGS GTAGS all all-am check check-am \ ++ clean clean-generic clean-libtool clean-recursive ctags \ ++ ctags-recursive distclean distclean-generic distclean-libtool \ ++ distclean-recursive distclean-tags distdir dvi dvi-am html \ ++ html-am info info-am install install-am install-data \ ++ install-data-am install-exec install-exec-am install-info \ ++ install-info-am install-man install-strip installcheck \ ++ installcheck-am installdirs installdirs-am maintainer-clean \ ++ maintainer-clean-generic maintainer-clean-recursive \ ++ mostlyclean mostlyclean-generic mostlyclean-libtool \ ++ mostlyclean-recursive pdf pdf-am ps ps-am tags tags-recursive \ ++ uninstall uninstall-am uninstall-info-am - # AC_PROVIDE_IFELSE(MACRO-NAME, IF-PROVIDED, IF-NOT-PROVIDED) - # ----------------------------------------------------------- + # Tell versions [3.59,3.63) of GNU make to not export all variables. + # Otherwise a system limit (for SysV at least) may be exceeded.