X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/7240ca9161d1de75478763f3ddccd55a6451c6de..2d96209135fb51c77d06c872164a1d7402820a48:/target/linux/ar71xx/patches-2.6.32/202-spi_vsc7385_driver.patch?ds=sidebyside diff --git a/target/linux/ar71xx/patches-2.6.32/202-spi_vsc7385_driver.patch b/target/linux/ar71xx/patches-2.6.32/202-spi_vsc7385_driver.patch index a4b4595b0..1cc64530a 100644 --- a/target/linux/ar71xx/patches-2.6.32/202-spi_vsc7385_driver.patch +++ b/target/linux/ar71xx/patches-2.6.32/202-spi_vsc7385_driver.patch @@ -1,8 +1,8 @@ --- a/drivers/spi/Kconfig +++ b/drivers/spi/Kconfig -@@ -296,6 +296,11 @@ config SPI_TLE62X0 - sysfs interface, with each line presented as a kind of GPIO - exposing both switch control and diagnostic feedback. +@@ -309,6 +309,11 @@ config SPI_RB4XX_CPLD + SPI driver for the Xilinx CPLD chip present on the + MikroTik RB4xx boards. +config SPI_VSC7385 + tristate "Vitesse VSC7385 ethernet switch driver" @@ -14,9 +14,9 @@ # --- a/drivers/spi/Makefile +++ b/drivers/spi/Makefile -@@ -40,6 +40,7 @@ obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp. - +@@ -42,6 +42,7 @@ obj-$(CONFIG_SPI_STMP3XXX) += spi_stmp. # SPI protocol drivers (device/link on bus) + obj-$(CONFIG_SPI_RB4XX_CPLD) += spi_rb4xx_cpld.o obj-$(CONFIG_SPI_SPIDEV) += spidev.o +obj-$(CONFIG_SPI_VSC7385) += spi_vsc7385.o obj-$(CONFIG_SPI_TLE62X0) += tle62x0.o