X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/7aa11efc1796c29d446eca99ec7d9bc7ed2c0072..74240a6a6ef06a253891bfaf7e2098155121ee67:/target/linux/brcm-2.4/base-files/etc/init.d/netconfig?ds=sidebyside

diff --git a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
index 643ba35d3..65ffe320d 100755
--- a/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
+++ b/target/linux/brcm-2.4/base-files/etc/init.d/netconfig
@@ -61,6 +61,11 @@ start() {
 			c["wan_ifname"] = "eth1"
 			c["lan_ifname"] = "eth0"
 		}
+		if (model == "ASUS WL-500g Premium V2") {
+				c["vlan0ports"] = "0 1 2 3 5*"
+				c["vlan1ports"] = "4 5"
+		}
+
 		if (model == "Dell TrueMobile 2300") {
 			c["vlan0ports"] = "0 1 2 3 5*"
 			c["vlan1ports"] = "4 5"
@@ -105,6 +110,13 @@ start() {
 			c["wan_ifname"]=""
 		}
 
+		# Sitecom WL-105b
+		if ((nvram["boardum"] == "2") && \
+			(nvram["GemtekPmonVer"] == "1")) {
+			c["lan_ifname"]="eth0"
+			c["wan_ifname"]=""
+		}
+
 		# ASUS WL-700gE
 		# These are actually same as defaults above. For some reason this script applies
 		# Generic BCM94704 settings instead so we revert to proper settings here.
@@ -120,6 +132,12 @@ start() {
 			c["vlan0ports"]="0 1 2 3 5*"
 			c["vlan1ports"]="4 5"
 		}
+		if (model == "ASUS WL-500W") {
+			c["lan_ifname"] = "eth0"
+			c["wan_ifname"] = "eth1"
+			c["vlan0ports"] = "0 1 2 3 4 5u"
+			c["vlan1ports"] = ""
+		}
 
 		print "#### VLAN configuration "
 		print "config switch eth0"