X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/841d5f442f9fa0e19f8abc87b821662bbc7ba4bd..84bf4449a74237550378ee5fded32c8ddb7b97ff:/target/linux/brcm47xx/patches-2.6.28/810-ssb-add-pmu-support.patch diff --git a/target/linux/brcm47xx/patches-2.6.28/810-ssb-add-pmu-support.patch b/target/linux/brcm47xx/patches-2.6.28/810-ssb-add-pmu-support.patch index c5ee8f5c6..7ab70aa54 100644 --- a/target/linux/brcm47xx/patches-2.6.28/810-ssb-add-pmu-support.patch +++ b/target/linux/brcm47xx/patches-2.6.28/810-ssb-add-pmu-support.patch @@ -1,7 +1,13 @@ -Index: linux-2.6.28.2/drivers/ssb/Makefile -=================================================================== ---- linux-2.6.28.2.orig/drivers/ssb/Makefile 2009-02-01 13:09:04.000000000 +0100 -+++ linux-2.6.28.2/drivers/ssb/Makefile 2009-02-01 13:09:31.000000000 +0100 +Sent to mainline on 2009 Feb 03. + +For further modifications, please use separate patch files. This simpifies +keeping track of what is upstream and what is not. Thanks. + +--mb + + +--- a/drivers/ssb/Makefile ++++ b/drivers/ssb/Makefile @@ -9,6 +9,7 @@ ssb-$(CONFIG_SSB_PCMCIAHOST) += pcmcia. # built-in drivers @@ -10,11 +16,9 @@ Index: linux-2.6.28.2/drivers/ssb/Makefile ssb-$(CONFIG_SSB_DRIVER_MIPS) += driver_mipscore.o ssb-$(CONFIG_SSB_DRIVER_EXTIF) += driver_extif.o ssb-$(CONFIG_SSB_DRIVER_PCICORE) += driver_pcicore.o -Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c -=================================================================== ---- /dev/null 1970-01-01 00:00:00.000000000 +0000 -+++ linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c 2009-02-01 21:16:15.000000000 +0100 -@@ -0,0 +1,378 @@ +--- /dev/null ++++ b/drivers/ssb/driver_chipcommon_pmu.c +@@ -0,0 +1,508 @@ +/* + * Sonics Silicon Backplane + * Broadcom ChipCommon Power Management Unit driver @@ -119,15 +123,15 @@ Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c + switch (bus->chip_id) { + case 0x4328: + chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, -+ ~(1 << SSB_PLLRES_4328_BB_PLL_PU)); ++ ~(1 << SSB_PMURES_4328_BB_PLL_PU)); + chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, -+ ~(1 << SSB_PLLRES_4328_BB_PLL_PU)); ++ ~(1 << SSB_PMURES_4328_BB_PLL_PU)); + break; + case 0x5354: + chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, -+ ~(1 << SSB_PLLRES_5354_BB_PLL_PU)); ++ ~(1 << SSB_PMURES_5354_BB_PLL_PU)); + chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, -+ ~(1 << SSB_PLLRES_5354_BB_PLL_PU)); ++ ~(1 << SSB_PMURES_5354_BB_PLL_PU)); + break; + default: + SSB_WARN_ON(1); @@ -176,12 +180,144 @@ Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c + chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl); +} + ++struct pmu1_plltab_entry { ++ u16 freq; /* Crystal frequency in kHz.*/ ++ u8 xf; /* Crystal frequency value for PMU control */ ++ u8 ndiv_int; ++ u32 ndiv_frac; ++ u8 p1div; ++ u8 p2div; ++}; ++ ++static const struct pmu1_plltab_entry pmu1_plltab[] = { ++ { .freq = 12000, .xf = 1, .p1div = 3, .p2div = 22, .ndiv_int = 0x9, .ndiv_frac = 0xFFFFEF, }, ++ { .freq = 13000, .xf = 2, .p1div = 1, .p2div = 6, .ndiv_int = 0xb, .ndiv_frac = 0x483483, }, ++ { .freq = 14400, .xf = 3, .p1div = 1, .p2div = 10, .ndiv_int = 0xa, .ndiv_frac = 0x1C71C7, }, ++ { .freq = 15360, .xf = 4, .p1div = 1, .p2div = 5, .ndiv_int = 0xb, .ndiv_frac = 0x755555, }, ++ { .freq = 16200, .xf = 5, .p1div = 1, .p2div = 10, .ndiv_int = 0x5, .ndiv_frac = 0x6E9E06, }, ++ { .freq = 16800, .xf = 6, .p1div = 1, .p2div = 10, .ndiv_int = 0x5, .ndiv_frac = 0x3CF3CF, }, ++ { .freq = 19200, .xf = 7, .p1div = 1, .p2div = 9, .ndiv_int = 0x5, .ndiv_frac = 0x17B425, }, ++ { .freq = 19800, .xf = 8, .p1div = 1, .p2div = 11, .ndiv_int = 0x4, .ndiv_frac = 0xA57EB, }, ++ { .freq = 20000, .xf = 9, .p1div = 1, .p2div = 11, .ndiv_int = 0x4, .ndiv_frac = 0, }, ++ { .freq = 24000, .xf = 10, .p1div = 3, .p2div = 11, .ndiv_int = 0xa, .ndiv_frac = 0, }, ++ { .freq = 25000, .xf = 11, .p1div = 5, .p2div = 16, .ndiv_int = 0xb, .ndiv_frac = 0, }, ++ { .freq = 26000, .xf = 12, .p1div = 1, .p2div = 2, .ndiv_int = 0x10, .ndiv_frac = 0xEC4EC4, }, ++ { .freq = 30000, .xf = 13, .p1div = 3, .p2div = 8, .ndiv_int = 0xb, .ndiv_frac = 0, }, ++ { .freq = 38400, .xf = 14, .p1div = 1, .p2div = 5, .ndiv_int = 0x4, .ndiv_frac = 0x955555, }, ++ { .freq = 40000, .xf = 15, .p1div = 1, .p2div = 2, .ndiv_int = 0xb, .ndiv_frac = 0, }, ++}; ++ ++#define SSB_PMU1_DEFAULT_XTALFREQ 15360 ++ ++static const struct pmu1_plltab_entry * pmu1_plltab_find_entry(u32 crystalfreq) ++{ ++ const struct pmu1_plltab_entry *e; ++ unsigned int i; ++ ++ for (i = 0; i < ARRAY_SIZE(pmu1_plltab); i++) { ++ e = &pmu1_plltab[i]; ++ if (e->freq == crystalfreq) ++ return e; ++ } ++ ++ return NULL; ++} ++ +/* Tune the PLL to the crystal speed. crystalfreq is in kHz. */ +static void ssb_pmu1_pllinit_r0(struct ssb_chipcommon *cc, + u32 crystalfreq) +{ -+ WARN_ON(1); -+ //TODO ++ struct ssb_bus *bus = cc->dev->bus; ++ const struct pmu1_plltab_entry *e = NULL; ++ u32 buffer_strength = 0; ++ u32 tmp, pllctl, pmuctl; ++ unsigned int i; ++ ++ if (bus->chip_id == 0x4312) { ++ /* We do not touch the BCM4312 PLL and assume ++ * the default crystal settings work out-of-the-box. */ ++ cc->pmu.crystalfreq = 20000; ++ return; ++ } ++ ++ if (crystalfreq) ++ e = pmu1_plltab_find_entry(crystalfreq); ++ if (!e) ++ e = pmu1_plltab_find_entry(SSB_PMU1_DEFAULT_XTALFREQ); ++ BUG_ON(!e); ++ crystalfreq = e->freq; ++ cc->pmu.crystalfreq = e->freq; ++ ++ /* Check if the PLL already is programmed to this frequency. */ ++ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL); ++ if (((pmuctl & SSB_CHIPCO_PMU_CTL_XTALFREQ) >> SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) == e->xf) { ++ /* We're already there... */ ++ return; ++ } ++ ++ ssb_printk(KERN_INFO PFX "Programming PLL to %u.%03u MHz\n", ++ (crystalfreq / 1000), (crystalfreq % 1000)); ++ ++ /* First turn the PLL off. */ ++ switch (bus->chip_id) { ++ case 0x4325: ++ chipco_mask32(cc, SSB_CHIPCO_PMU_MINRES_MSK, ++ ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) | ++ (1 << SSB_PMURES_4325_HT_AVAIL))); ++ chipco_mask32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, ++ ~((1 << SSB_PMURES_4325_BBPLL_PWRSW_PU) | ++ (1 << SSB_PMURES_4325_HT_AVAIL))); ++ /* Adjust the BBPLL to 2 on all channels later. */ ++ buffer_strength = 0x222222; ++ break; ++ default: ++ SSB_WARN_ON(1); ++ } ++ for (i = 1500; i; i--) { ++ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST); ++ if (!(tmp & SSB_CHIPCO_CLKCTLST_HAVEHT)) ++ break; ++ udelay(10); ++ } ++ tmp = chipco_read32(cc, SSB_CHIPCO_CLKCTLST); ++ if (tmp & SSB_CHIPCO_CLKCTLST_HAVEHT) ++ ssb_printk(KERN_EMERG PFX "Failed to turn the PLL off!\n"); ++ ++ /* Set p1div and p2div. */ ++ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL0); ++ pllctl &= ~(SSB_PMU1_PLLCTL0_P1DIV | SSB_PMU1_PLLCTL0_P2DIV); ++ pllctl |= ((u32)e->p1div << SSB_PMU1_PLLCTL0_P1DIV_SHIFT) & SSB_PMU1_PLLCTL0_P1DIV; ++ pllctl |= ((u32)e->p2div << SSB_PMU1_PLLCTL0_P2DIV_SHIFT) & SSB_PMU1_PLLCTL0_P2DIV; ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL0, pllctl); ++ ++ /* Set ndiv int and ndiv mode */ ++ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL2); ++ pllctl &= ~(SSB_PMU1_PLLCTL2_NDIVINT | SSB_PMU1_PLLCTL2_NDIVMODE); ++ pllctl |= ((u32)e->ndiv_int << SSB_PMU1_PLLCTL2_NDIVINT_SHIFT) & SSB_PMU1_PLLCTL2_NDIVINT; ++ pllctl |= (1 << SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT) & SSB_PMU1_PLLCTL2_NDIVMODE; ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL2, pllctl); ++ ++ /* Set ndiv frac */ ++ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL3); ++ pllctl &= ~SSB_PMU1_PLLCTL3_NDIVFRAC; ++ pllctl |= ((u32)e->ndiv_frac << SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT) & SSB_PMU1_PLLCTL3_NDIVFRAC; ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL3, pllctl); ++ ++ /* Change the drive strength, if required. */ ++ if (buffer_strength) { ++ pllctl = ssb_chipco_pll_read(cc, SSB_PMU1_PLLCTL5); ++ pllctl &= ~SSB_PMU1_PLLCTL5_CLKDRV; ++ pllctl |= (buffer_strength << SSB_PMU1_PLLCTL5_CLKDRV_SHIFT) & SSB_PMU1_PLLCTL5_CLKDRV; ++ ssb_chipco_pll_write(cc, SSB_PMU1_PLLCTL5, pllctl); ++ } ++ ++ /* Tune the crystalfreq and the divisor. */ ++ pmuctl = chipco_read32(cc, SSB_CHIPCO_PMU_CTL); ++ pmuctl &= ~(SSB_CHIPCO_PMU_CTL_ILP_DIV | SSB_CHIPCO_PMU_CTL_XTALFREQ); ++ pmuctl |= ((((u32)e->freq + 127) / 128 - 1) << SSB_CHIPCO_PMU_CTL_ILP_DIV_SHIFT) ++ & SSB_CHIPCO_PMU_CTL_ILP_DIV; ++ pmuctl |= ((u32)e->xf << SSB_CHIPCO_PMU_CTL_XTALFREQ_SHIFT) & SSB_CHIPCO_PMU_CTL_XTALFREQ; ++ chipco_write32(cc, SSB_CHIPCO_PMU_CTL, pmuctl); +} + +static void ssb_pmu_pll_init(struct ssb_chipcommon *cc) @@ -227,51 +363,51 @@ Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c +}; + +static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4328a0[] = { -+ { .resource = SSB_PLLRES_4328_EXT_SWITCHER_PWM, .updown = 0x0101, }, -+ { .resource = SSB_PLLRES_4328_BB_SWITCHER_PWM, .updown = 0x1F01, }, -+ { .resource = SSB_PLLRES_4328_BB_SWITCHER_BURST, .updown = 0x010F, }, -+ { .resource = SSB_PLLRES_4328_BB_EXT_SWITCHER_BURST, .updown = 0x0101, }, -+ { .resource = SSB_PLLRES_4328_ILP_REQUEST, .updown = 0x0202, }, -+ { .resource = SSB_PLLRES_4328_RADIO_SWITCHER_PWM, .updown = 0x0F01, }, -+ { .resource = SSB_PLLRES_4328_RADIO_SWITCHER_BURST, .updown = 0x0F01, }, -+ { .resource = SSB_PLLRES_4328_ROM_SWITCH, .updown = 0x0101, }, -+ { .resource = SSB_PLLRES_4328_PA_REF_LDO, .updown = 0x0F01, }, -+ { .resource = SSB_PLLRES_4328_RADIO_LDO, .updown = 0x0F01, }, -+ { .resource = SSB_PLLRES_4328_AFE_LDO, .updown = 0x0F01, }, -+ { .resource = SSB_PLLRES_4328_PLL_LDO, .updown = 0x0F01, }, -+ { .resource = SSB_PLLRES_4328_BG_FILTBYP, .updown = 0x0101, }, -+ { .resource = SSB_PLLRES_4328_TX_FILTBYP, .updown = 0x0101, }, -+ { .resource = SSB_PLLRES_4328_RX_FILTBYP, .updown = 0x0101, }, -+ { .resource = SSB_PLLRES_4328_XTAL_PU, .updown = 0x0101, }, -+ { .resource = SSB_PLLRES_4328_XTAL_EN, .updown = 0xA001, }, -+ { .resource = SSB_PLLRES_4328_BB_PLL_FILTBYP, .updown = 0x0101, }, -+ { .resource = SSB_PLLRES_4328_RF_PLL_FILTBYP, .updown = 0x0101, }, -+ { .resource = SSB_PLLRES_4328_BB_PLL_PU, .updown = 0x0701, }, ++ { .resource = SSB_PMURES_4328_EXT_SWITCHER_PWM, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_BB_SWITCHER_PWM, .updown = 0x1F01, }, ++ { .resource = SSB_PMURES_4328_BB_SWITCHER_BURST, .updown = 0x010F, }, ++ { .resource = SSB_PMURES_4328_BB_EXT_SWITCHER_BURST, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_ILP_REQUEST, .updown = 0x0202, }, ++ { .resource = SSB_PMURES_4328_RADIO_SWITCHER_PWM, .updown = 0x0F01, }, ++ { .resource = SSB_PMURES_4328_RADIO_SWITCHER_BURST, .updown = 0x0F01, }, ++ { .resource = SSB_PMURES_4328_ROM_SWITCH, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_PA_REF_LDO, .updown = 0x0F01, }, ++ { .resource = SSB_PMURES_4328_RADIO_LDO, .updown = 0x0F01, }, ++ { .resource = SSB_PMURES_4328_AFE_LDO, .updown = 0x0F01, }, ++ { .resource = SSB_PMURES_4328_PLL_LDO, .updown = 0x0F01, }, ++ { .resource = SSB_PMURES_4328_BG_FILTBYP, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_TX_FILTBYP, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_RX_FILTBYP, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_XTAL_PU, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_XTAL_EN, .updown = 0xA001, }, ++ { .resource = SSB_PMURES_4328_BB_PLL_FILTBYP, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_RF_PLL_FILTBYP, .updown = 0x0101, }, ++ { .resource = SSB_PMURES_4328_BB_PLL_PU, .updown = 0x0701, }, +}; + +static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4328a0[] = { + { + /* Adjust ILP Request to avoid forcing EXT/BB into burst mode. */ -+ .resource = SSB_PLLRES_4328_ILP_REQUEST, ++ .resource = SSB_PMURES_4328_ILP_REQUEST, + .task = PMU_RES_DEP_SET, -+ .depend = ((1 << SSB_PLLRES_4328_EXT_SWITCHER_PWM) | -+ (1 << SSB_PLLRES_4328_BB_SWITCHER_PWM)), ++ .depend = ((1 << SSB_PMURES_4328_EXT_SWITCHER_PWM) | ++ (1 << SSB_PMURES_4328_BB_SWITCHER_PWM)), + }, +}; + +static const struct pmu_res_updown_tab_entry pmu_res_updown_tab_4325a0[] = { -+ { .resource = SSB_PLLRES_4325_XTAL_PU, .updown = 0x1501, }, ++ { .resource = SSB_PMURES_4325_XTAL_PU, .updown = 0x1501, }, +}; + +static const struct pmu_res_depend_tab_entry pmu_res_depend_tab_4325a0[] = { + { + /* Adjust HT-Available dependencies. */ -+ .resource = SSB_PLLRES_4325_HT_AVAIL, ++ .resource = SSB_PMURES_4325_HT_AVAIL, + .task = PMU_RES_DEP_ADD, -+ .depend = ((1 << SSB_PLLRES_4325_RX_PWRSW_PU) | -+ (1 << SSB_PLLRES_4325_TX_PWRSW_PU) | -+ (1 << SSB_PLLRES_4325_LOGEN_PWRSW_PU) | -+ (1 << SSB_PLLRES_4325_AFE_PWRSW_PU)), ++ .depend = ((1 << SSB_PMURES_4325_RX_PWRSW_PU) | ++ (1 << SSB_PMURES_4325_TX_PWRSW_PU) | ++ (1 << SSB_PMURES_4325_LOGEN_PWRSW_PU) | ++ (1 << SSB_PMURES_4325_AFE_PWRSW_PU)), + }, +}; + @@ -294,11 +430,11 @@ Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c + break; + case 0x4325: + /* Power OTP down later. */ -+ min_msk = (1 << SSB_PLLRES_4325_CBUCK_BURST) | -+ (1 << SSB_PLLRES_4325_LNLDO2_PU); ++ min_msk = (1 << SSB_PMURES_4325_CBUCK_BURST) | ++ (1 << SSB_PMURES_4325_LNLDO2_PU); + if (chipco_read32(cc, SSB_CHIPCO_CHIPSTAT) & + SSB_CHIPCO_CHST_4325_PMUTOP_2B) -+ min_msk |= (1 << SSB_PLLRES_4325_CLDO_CBUCK_BURST); ++ min_msk |= (1 << SSB_PMURES_4325_CLDO_CBUCK_BURST); + /* The PLL may turn on, if it decides so. */ + max_msk = 0xFFFFF; + updown_tab = pmu_res_updown_tab_4325a0; @@ -307,9 +443,9 @@ Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c + depend_tab_size = ARRAY_SIZE(pmu_res_depend_tab_4325a0); + break; + case 0x4328: -+ min_msk = (1 << SSB_PLLRES_4328_EXT_SWITCHER_PWM) | -+ (1 << SSB_PLLRES_4328_BB_SWITCHER_PWM) | -+ (1 << SSB_PLLRES_4328_XTAL_EN); ++ min_msk = (1 << SSB_PMURES_4328_EXT_SWITCHER_PWM) | ++ (1 << SSB_PMURES_4328_BB_SWITCHER_PWM) | ++ (1 << SSB_PMURES_4328_XTAL_EN); + /* The PLL may turn on, if it decides so. */ + max_msk = 0xFFFFF; + updown_tab = pmu_res_updown_tab_4328a0; @@ -370,8 +506,6 @@ Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c + struct ssb_bus *bus = cc->dev->bus; + u32 pmucap; + -+if (bus->chip_id != 0x5354) return; //FIXME currently only 5354 code implemented. -+ + if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU)) + return; + @@ -393,10 +527,8 @@ Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon_pmu.c + ssb_pmu_pll_init(cc); + ssb_pmu_resources_init(cc); +} -Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon.c -=================================================================== ---- linux-2.6.28.2.orig/drivers/ssb/driver_chipcommon.c 2009-02-01 13:07:03.000000000 +0100 -+++ linux-2.6.28.2/drivers/ssb/driver_chipcommon.c 2009-02-01 13:47:17.000000000 +0100 +--- a/drivers/ssb/driver_chipcommon.c ++++ b/drivers/ssb/driver_chipcommon.c @@ -26,19 +26,6 @@ enum ssb_clksrc { }; @@ -425,10 +557,8 @@ Index: linux-2.6.28.2/drivers/ssb/driver_chipcommon.c chipco_powercontrol_init(cc); ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); calc_fast_powerup_delay(cc); -Index: linux-2.6.28.2/include/linux/ssb/ssb_driver_chipcommon.h -=================================================================== ---- linux-2.6.28.2.orig/include/linux/ssb/ssb_driver_chipcommon.h 2009-02-01 13:22:59.000000000 +0100 -+++ linux-2.6.28.2/include/linux/ssb/ssb_driver_chipcommon.h 2009-02-01 21:09:37.000000000 +0100 +--- a/include/linux/ssb/ssb_driver_chipcommon.h ++++ b/include/linux/ssb/ssb_driver_chipcommon.h @@ -181,6 +181,16 @@ #define SSB_CHIPCO_PROG_WAITCNT 0x0124 #define SSB_CHIPCO_FLASH_CFG 0x0128 @@ -446,7 +576,7 @@ Index: linux-2.6.28.2/include/linux/ssb/ssb_driver_chipcommon.h #define SSB_CHIPCO_UART0_DATA 0x0300 #define SSB_CHIPCO_UART0_IMR 0x0304 #define SSB_CHIPCO_UART0_FCR 0x0308 -@@ -197,6 +207,172 @@ +@@ -197,6 +207,196 @@ #define SSB_CHIPCO_UART1_LSR 0x0414 #define SSB_CHIPCO_UART1_MSR 0x0418 #define SSB_CHIPCO_UART1_SCRATCH 0x041C @@ -510,96 +640,120 @@ Index: linux-2.6.28.2/include/linux/ssb/ssb_driver_chipcommon.h + +/* PMU rev 1 PLL registers */ +#define SSB_PMU1_PLLCTL0 0 ++#define SSB_PMU1_PLLCTL0_P1DIV 0x00F00000 /* P1 div */ ++#define SSB_PMU1_PLLCTL0_P1DIV_SHIFT 20 ++#define SSB_PMU1_PLLCTL0_P2DIV 0x0F000000 /* P2 div */ ++#define SSB_PMU1_PLLCTL0_P2DIV_SHIFT 24 +#define SSB_PMU1_PLLCTL1 1 ++#define SSB_PMU1_PLLCTL1_M1DIV 0x000000FF /* M1 div */ ++#define SSB_PMU1_PLLCTL1_M1DIV_SHIFT 0 ++#define SSB_PMU1_PLLCTL1_M2DIV 0x0000FF00 /* M2 div */ ++#define SSB_PMU1_PLLCTL1_M2DIV_SHIFT 8 ++#define SSB_PMU1_PLLCTL1_M3DIV 0x00FF0000 /* M3 div */ ++#define SSB_PMU1_PLLCTL1_M3DIV_SHIFT 16 ++#define SSB_PMU1_PLLCTL1_M4DIV 0xFF000000 /* M4 div */ ++#define SSB_PMU1_PLLCTL1_M4DIV_SHIFT 24 +#define SSB_PMU1_PLLCTL2 2 ++#define SSB_PMU1_PLLCTL2_M5DIV 0x000000FF /* M5 div */ ++#define SSB_PMU1_PLLCTL2_M5DIV_SHIFT 0 ++#define SSB_PMU1_PLLCTL2_M6DIV 0x0000FF00 /* M6 div */ ++#define SSB_PMU1_PLLCTL2_M6DIV_SHIFT 8 ++#define SSB_PMU1_PLLCTL2_NDIVMODE 0x000E0000 /* NDIV mode */ ++#define SSB_PMU1_PLLCTL2_NDIVMODE_SHIFT 17 ++#define SSB_PMU1_PLLCTL2_NDIVINT 0x1FF00000 /* NDIV int */ ++#define SSB_PMU1_PLLCTL2_NDIVINT_SHIFT 20 +#define SSB_PMU1_PLLCTL3 3 ++#define SSB_PMU1_PLLCTL3_NDIVFRAC 0x00FFFFFF /* NDIV frac */ ++#define SSB_PMU1_PLLCTL3_NDIVFRAC_SHIFT 0 +#define SSB_PMU1_PLLCTL4 4 +#define SSB_PMU1_PLLCTL5 5 ++#define SSB_PMU1_PLLCTL5_CLKDRV 0xFFFFFF00 /* clk drv */ ++#define SSB_PMU1_PLLCTL5_CLKDRV_SHIFT 8 + +/* BCM4312 PLL resource numbers. */ -+#define SSB_PLLRES_4312_SWITCHER_BURST 0 -+#define SSB_PLLRES_4312_SWITCHER_PWM 1 -+#define SSB_PLLRES_4312_PA_REF_LDO 2 -+#define SSB_PLLRES_4312_CORE_LDO_BURST 3 -+#define SSB_PLLRES_4312_CORE_LDO_PWM 4 -+#define SSB_PLLRES_4312_RADIO_LDO 5 -+#define SSB_PLLRES_4312_ILP_REQUEST 6 -+#define SSB_PLLRES_4312_BG_FILTBYP 7 -+#define SSB_PLLRES_4312_TX_FILTBYP 8 -+#define SSB_PLLRES_4312_RX_FILTBYP 9 -+#define SSB_PLLRES_4312_XTAL_PU 10 -+#define SSB_PLLRES_4312_ALP_AVAIL 11 -+#define SSB_PLLRES_4312_BB_PLL_FILTBYP 12 -+#define SSB_PLLRES_4312_RF_PLL_FILTBYP 13 -+#define SSB_PLLRES_4312_HT_AVAIL 14 ++#define SSB_PMURES_4312_SWITCHER_BURST 0 ++#define SSB_PMURES_4312_SWITCHER_PWM 1 ++#define SSB_PMURES_4312_PA_REF_LDO 2 ++#define SSB_PMURES_4312_CORE_LDO_BURST 3 ++#define SSB_PMURES_4312_CORE_LDO_PWM 4 ++#define SSB_PMURES_4312_RADIO_LDO 5 ++#define SSB_PMURES_4312_ILP_REQUEST 6 ++#define SSB_PMURES_4312_BG_FILTBYP 7 ++#define SSB_PMURES_4312_TX_FILTBYP 8 ++#define SSB_PMURES_4312_RX_FILTBYP 9 ++#define SSB_PMURES_4312_XTAL_PU 10 ++#define SSB_PMURES_4312_ALP_AVAIL 11 ++#define SSB_PMURES_4312_BB_PLL_FILTBYP 12 ++#define SSB_PMURES_4312_RF_PLL_FILTBYP 13 ++#define SSB_PMURES_4312_HT_AVAIL 14 + +/* BCM4325 PLL resource numbers. */ -+#define SSB_PLLRES_4325_BUCK_BOOST_BURST 0 -+#define SSB_PLLRES_4325_CBUCK_BURST 1 -+#define SSB_PLLRES_4325_CBUCK_PWM 2 -+#define SSB_PLLRES_4325_CLDO_CBUCK_BURST 3 -+#define SSB_PLLRES_4325_CLDO_CBUCK_PWM 4 -+#define SSB_PLLRES_4325_BUCK_BOOST_PWM 5 -+#define SSB_PLLRES_4325_ILP_REQUEST 6 -+#define SSB_PLLRES_4325_ABUCK_BURST 7 -+#define SSB_PLLRES_4325_ABUCK_PWM 8 -+#define SSB_PLLRES_4325_LNLDO1_PU 9 -+#define SSB_PLLRES_4325_LNLDO2_PU 10 -+#define SSB_PLLRES_4325_LNLDO3_PU 11 -+#define SSB_PLLRES_4325_LNLDO4_PU 12 -+#define SSB_PLLRES_4325_XTAL_PU 13 -+#define SSB_PLLRES_4325_ALP_AVAIL 14 -+#define SSB_PLLRES_4325_RX_PWRSW_PU 15 -+#define SSB_PLLRES_4325_TX_PWRSW_PU 16 -+#define SSB_PLLRES_4325_RFPLL_PWRSW_PU 17 -+#define SSB_PLLRES_4325_LOGEN_PWRSW_PU 18 -+#define SSB_PLLRES_4325_AFE_PWRSW_PU 19 -+#define SSB_PLLRES_4325_BBPLL_PWRSW_PU 20 -+#define SSB_PLLRES_4325_HT_AVAIL 21 ++#define SSB_PMURES_4325_BUCK_BOOST_BURST 0 ++#define SSB_PMURES_4325_CBUCK_BURST 1 ++#define SSB_PMURES_4325_CBUCK_PWM 2 ++#define SSB_PMURES_4325_CLDO_CBUCK_BURST 3 ++#define SSB_PMURES_4325_CLDO_CBUCK_PWM 4 ++#define SSB_PMURES_4325_BUCK_BOOST_PWM 5 ++#define SSB_PMURES_4325_ILP_REQUEST 6 ++#define SSB_PMURES_4325_ABUCK_BURST 7 ++#define SSB_PMURES_4325_ABUCK_PWM 8 ++#define SSB_PMURES_4325_LNLDO1_PU 9 ++#define SSB_PMURES_4325_LNLDO2_PU 10 ++#define SSB_PMURES_4325_LNLDO3_PU 11 ++#define SSB_PMURES_4325_LNLDO4_PU 12 ++#define SSB_PMURES_4325_XTAL_PU 13 ++#define SSB_PMURES_4325_ALP_AVAIL 14 ++#define SSB_PMURES_4325_RX_PWRSW_PU 15 ++#define SSB_PMURES_4325_TX_PWRSW_PU 16 ++#define SSB_PMURES_4325_RFPLL_PWRSW_PU 17 ++#define SSB_PMURES_4325_LOGEN_PWRSW_PU 18 ++#define SSB_PMURES_4325_AFE_PWRSW_PU 19 ++#define SSB_PMURES_4325_BBPLL_PWRSW_PU 20 ++#define SSB_PMURES_4325_HT_AVAIL 21 + +/* BCM4328 PLL resource numbers. */ -+#define SSB_PLLRES_4328_EXT_SWITCHER_PWM 0 -+#define SSB_PLLRES_4328_BB_SWITCHER_PWM 1 -+#define SSB_PLLRES_4328_BB_SWITCHER_BURST 2 -+#define SSB_PLLRES_4328_BB_EXT_SWITCHER_BURST 3 -+#define SSB_PLLRES_4328_ILP_REQUEST 4 -+#define SSB_PLLRES_4328_RADIO_SWITCHER_PWM 5 -+#define SSB_PLLRES_4328_RADIO_SWITCHER_BURST 6 -+#define SSB_PLLRES_4328_ROM_SWITCH 7 -+#define SSB_PLLRES_4328_PA_REF_LDO 8 -+#define SSB_PLLRES_4328_RADIO_LDO 9 -+#define SSB_PLLRES_4328_AFE_LDO 10 -+#define SSB_PLLRES_4328_PLL_LDO 11 -+#define SSB_PLLRES_4328_BG_FILTBYP 12 -+#define SSB_PLLRES_4328_TX_FILTBYP 13 -+#define SSB_PLLRES_4328_RX_FILTBYP 14 -+#define SSB_PLLRES_4328_XTAL_PU 15 -+#define SSB_PLLRES_4328_XTAL_EN 16 -+#define SSB_PLLRES_4328_BB_PLL_FILTBYP 17 -+#define SSB_PLLRES_4328_RF_PLL_FILTBYP 18 -+#define SSB_PLLRES_4328_BB_PLL_PU 19 ++#define SSB_PMURES_4328_EXT_SWITCHER_PWM 0 ++#define SSB_PMURES_4328_BB_SWITCHER_PWM 1 ++#define SSB_PMURES_4328_BB_SWITCHER_BURST 2 ++#define SSB_PMURES_4328_BB_EXT_SWITCHER_BURST 3 ++#define SSB_PMURES_4328_ILP_REQUEST 4 ++#define SSB_PMURES_4328_RADIO_SWITCHER_PWM 5 ++#define SSB_PMURES_4328_RADIO_SWITCHER_BURST 6 ++#define SSB_PMURES_4328_ROM_SWITCH 7 ++#define SSB_PMURES_4328_PA_REF_LDO 8 ++#define SSB_PMURES_4328_RADIO_LDO 9 ++#define SSB_PMURES_4328_AFE_LDO 10 ++#define SSB_PMURES_4328_PLL_LDO 11 ++#define SSB_PMURES_4328_BG_FILTBYP 12 ++#define SSB_PMURES_4328_TX_FILTBYP 13 ++#define SSB_PMURES_4328_RX_FILTBYP 14 ++#define SSB_PMURES_4328_XTAL_PU 15 ++#define SSB_PMURES_4328_XTAL_EN 16 ++#define SSB_PMURES_4328_BB_PLL_FILTBYP 17 ++#define SSB_PMURES_4328_RF_PLL_FILTBYP 18 ++#define SSB_PMURES_4328_BB_PLL_PU 19 + +/* BCM5354 PLL resource numbers. */ -+#define SSB_PLLRES_5354_EXT_SWITCHER_PWM 0 -+#define SSB_PLLRES_5354_BB_SWITCHER_PWM 1 -+#define SSB_PLLRES_5354_BB_SWITCHER_BURST 2 -+#define SSB_PLLRES_5354_BB_EXT_SWITCHER_BURST 3 -+#define SSB_PLLRES_5354_ILP_REQUEST 4 -+#define SSB_PLLRES_5354_RADIO_SWITCHER_PWM 5 -+#define SSB_PLLRES_5354_RADIO_SWITCHER_BURST 6 -+#define SSB_PLLRES_5354_ROM_SWITCH 7 -+#define SSB_PLLRES_5354_PA_REF_LDO 8 -+#define SSB_PLLRES_5354_RADIO_LDO 9 -+#define SSB_PLLRES_5354_AFE_LDO 10 -+#define SSB_PLLRES_5354_PLL_LDO 11 -+#define SSB_PLLRES_5354_BG_FILTBYP 12 -+#define SSB_PLLRES_5354_TX_FILTBYP 13 -+#define SSB_PLLRES_5354_RX_FILTBYP 14 -+#define SSB_PLLRES_5354_XTAL_PU 15 -+#define SSB_PLLRES_5354_XTAL_EN 16 -+#define SSB_PLLRES_5354_BB_PLL_FILTBYP 17 -+#define SSB_PLLRES_5354_RF_PLL_FILTBYP 18 -+#define SSB_PLLRES_5354_BB_PLL_PU 19 ++#define SSB_PMURES_5354_EXT_SWITCHER_PWM 0 ++#define SSB_PMURES_5354_BB_SWITCHER_PWM 1 ++#define SSB_PMURES_5354_BB_SWITCHER_BURST 2 ++#define SSB_PMURES_5354_BB_EXT_SWITCHER_BURST 3 ++#define SSB_PMURES_5354_ILP_REQUEST 4 ++#define SSB_PMURES_5354_RADIO_SWITCHER_PWM 5 ++#define SSB_PMURES_5354_RADIO_SWITCHER_BURST 6 ++#define SSB_PMURES_5354_ROM_SWITCH 7 ++#define SSB_PMURES_5354_PA_REF_LDO 8 ++#define SSB_PMURES_5354_RADIO_LDO 9 ++#define SSB_PMURES_5354_AFE_LDO 10 ++#define SSB_PMURES_5354_PLL_LDO 11 ++#define SSB_PMURES_5354_BG_FILTBYP 12 ++#define SSB_PMURES_5354_TX_FILTBYP 13 ++#define SSB_PMURES_5354_RX_FILTBYP 14 ++#define SSB_PMURES_5354_XTAL_PU 15 ++#define SSB_PMURES_5354_XTAL_EN 16 ++#define SSB_PMURES_5354_BB_PLL_FILTBYP 17 ++#define SSB_PMURES_5354_RF_PLL_FILTBYP 18 ++#define SSB_PMURES_5354_BB_PLL_PU 19 + + + @@ -619,7 +773,7 @@ Index: linux-2.6.28.2/include/linux/ssb/ssb_driver_chipcommon.h -@@ -353,11 +529,20 @@ +@@ -353,11 +553,20 @@ struct ssb_device; struct ssb_serial_port; @@ -640,7 +794,7 @@ Index: linux-2.6.28.2/include/linux/ssb/ssb_driver_chipcommon.h }; static inline bool ssb_chipco_available(struct ssb_chipcommon *cc) -@@ -365,6 +550,17 @@ static inline bool ssb_chipco_available( +@@ -365,6 +574,17 @@ static inline bool ssb_chipco_available( return (cc->dev != NULL); } @@ -658,7 +812,7 @@ Index: linux-2.6.28.2/include/linux/ssb/ssb_driver_chipcommon.h extern void ssb_chipcommon_init(struct ssb_chipcommon *cc); extern void ssb_chipco_suspend(struct ssb_chipcommon *cc); -@@ -406,4 +602,8 @@ extern int ssb_chipco_serial_init(struct +@@ -406,4 +626,8 @@ extern int ssb_chipco_serial_init(struct struct ssb_serial_port *ports); #endif /* CONFIG_SSB_SERIAL */