X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/87bde5d7d348a4d50807a9d90493c3616c77a901..991e3e94c9668fb52ff2cc916d4ca1b9211f1f02:/target/linux/at91/patches-2.6.25/000-at91patches.patch?ds=sidebyside diff --git a/target/linux/at91/patches-2.6.25/000-at91patches.patch b/target/linux/at91/patches-2.6.25/000-at91patches.patch index b522a3002..06c29351e 100644 --- a/target/linux/at91/patches-2.6.25/000-at91patches.patch +++ b/target/linux/at91/patches-2.6.25/000-at91patches.patch @@ -1,7 +1,6 @@ -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/Kconfig linux-2.6/arch/arm/mach-at91/Kconfig ---- linux-2.6.25/arch/arm/mach-at91/Kconfig 2008-05-03 00:15:44.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/Kconfig 2008-04-25 21:15:43.000000000 +0200 -@@ -12,18 +12,28 @@ +--- a/arch/arm/mach-at91/Kconfig ++++ b/arch/arm/mach-at91/Kconfig +@@ -12,18 +12,28 @@ config ARCH_AT91RM9200 config ARCH_AT91SAM9260 bool "AT91SAM9260 or AT91SAM9XE" @@ -30,7 +29,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/Kconfig linux-2.6/arch/arm/mach config ARCH_AT91X40 bool "AT91x40" -@@ -45,7 +55,7 @@ +@@ -45,7 +55,7 @@ config MACH_ONEARM depends on ARCH_AT91RM9200 help Select this if you are using Ajeco's 1ARM Single Board Computer. @@ -39,7 +38,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/Kconfig linux-2.6/arch/arm/mach config ARCH_AT91RM9200DK bool "Atmel AT91RM9200-DK Development board" -@@ -94,7 +104,7 @@ +@@ -94,7 +104,7 @@ config MACH_KB9200 depends on ARCH_AT91RM9200 help Select this if you are using KwikByte's KB920x board. @@ -48,7 +47,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/Kconfig linux-2.6/arch/arm/mach config MACH_PICOTUX2XX bool "picotux 200" -@@ -109,6 +119,38 @@ +@@ -109,6 +119,38 @@ config MACH_KAFA help Select this if you are using Sperry-Sun's KAFA board. @@ -87,7 +86,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/Kconfig linux-2.6/arch/arm/mach endif # ---------------------------------------------------------- -@@ -133,6 +175,34 @@ +@@ -133,6 +175,34 @@ config MACH_AT91SAM9260EK Select this if you are using Atmel's AT91SAM9260-EK or AT91SAM9XE Evaluation Kit @@ -122,7 +121,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/Kconfig linux-2.6/arch/arm/mach endif # ---------------------------------------------------------- -@@ -163,6 +233,13 @@ +@@ -163,6 +233,13 @@ config MACH_AT91SAM9263EK Select this if you are using Atmel's AT91SAM9263-EK Evaluation Kit. @@ -136,7 +135,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/Kconfig linux-2.6/arch/arm/mach endif # ---------------------------------------------------------- -@@ -216,7 +293,7 @@ +@@ -216,7 +293,7 @@ comment "AT91 Board Options" config MTD_AT91_DATAFLASH_CARD bool "Enable DataFlash Card support" @@ -145,7 +144,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/Kconfig linux-2.6/arch/arm/mach help Enable support for the DataFlash card. -@@ -237,6 +314,19 @@ +@@ -237,6 +314,19 @@ config AT91_PROGRAMMABLE_CLOCKS Select this if you need to program one or more of the PCK0..PCK3 programmable clock outputs. @@ -165,10 +164,9 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/Kconfig linux-2.6/arch/arm/mach config AT91_TIMER_HZ int "Kernel HZ (jiffies per second)" range 32 1024 -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/Makefile linux-2.6/arch/arm/mach-at91/Makefile ---- linux-2.6.25/arch/arm/mach-at91/Makefile 2008-05-03 00:15:44.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/Makefile 2008-04-25 21:15:43.000000000 +0200 -@@ -28,16 +28,26 @@ +--- a/arch/arm/mach-at91/Makefile ++++ b/arch/arm/mach-at91/Makefile +@@ -28,16 +28,26 @@ obj-$(CONFIG_MACH_CARMEVA) += board-carm obj-$(CONFIG_MACH_KB9200) += board-kb9202.o obj-$(CONFIG_MACH_ATEB9200) += board-eb9200.o obj-$(CONFIG_MACH_KAFA) += board-kafa.o @@ -195,7 +193,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/Makefile linux-2.6/arch/arm/mac # AT91SAM9RL board-specific support obj-$(CONFIG_MACH_AT91SAM9RLEK) += board-sam9rlek.o -@@ -50,9 +60,11 @@ +@@ -50,9 +60,11 @@ obj-$(CONFIG_MACH_AT91EB01) += board-eb0 # Drivers obj-y += leds.o @@ -207,9 +205,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/Makefile linux-2.6/arch/arm/mac ifeq ($(CONFIG_PM_DEBUG),y) CFLAGS_pm.o += -DDEBUG -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91cap9.c linux-2.6/arch/arm/mach-at91/at91cap9.c ---- linux-2.6.25/arch/arm/mach-at91/at91cap9.c 2008-05-03 00:15:44.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91cap9.c 2008-05-05 22:01:39.000000000 +0200 +--- a/arch/arm/mach-at91/at91cap9.c ++++ b/arch/arm/mach-at91/at91cap9.c @@ -13,12 +13,15 @@ */ @@ -226,7 +223,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91cap9.c linux-2.6/arch/arm/m #include "generic.h" #include "clock.h" -@@ -288,6 +291,12 @@ +@@ -288,6 +291,12 @@ static void at91cap9_reset(void) at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } @@ -239,7 +236,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91cap9.c linux-2.6/arch/arm/m /* -------------------------------------------------------------------- * AT91CAP9 processor initialization * -------------------------------------------------------------------- */ -@@ -298,6 +307,7 @@ +@@ -298,6 +307,7 @@ void __init at91cap9_initialize(unsigned iotable_init(at91cap9_io_desc, ARRAY_SIZE(at91cap9_io_desc)); at91_arch_reset = at91cap9_reset; @@ -247,7 +244,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91cap9.c linux-2.6/arch/arm/m at91_extern_irq = (1 << AT91CAP9_ID_IRQ0) | (1 << AT91CAP9_ID_IRQ1); /* Init clock subsystem */ -@@ -308,6 +318,12 @@ +@@ -308,6 +318,12 @@ void __init at91cap9_initialize(unsigned /* Register GPIO subsystem */ at91_gpio_init(at91cap9_gpio, 4); @@ -260,9 +257,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91cap9.c linux-2.6/arch/arm/m } /* -------------------------------------------------------------------- -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91cap9_devices.c linux-2.6/arch/arm/mach-at91/at91cap9_devices.c ---- linux-2.6.25/arch/arm/mach-at91/at91cap9_devices.c 2008-05-03 00:15:44.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91cap9_devices.c 2008-05-05 22:01:39.000000000 +0200 +--- a/arch/arm/mach-at91/at91cap9_devices.c ++++ b/arch/arm/mach-at91/at91cap9_devices.c @@ -13,18 +13,20 @@ */ #include @@ -286,7 +282,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91cap9_devices.c linux-2.6/ar #include "generic.h" -@@ -69,6 +71,9 @@ +@@ -69,6 +71,9 @@ void __init at91_add_device_usbh(struct if (!data) return; @@ -296,7 +292,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91cap9_devices.c linux-2.6/ar /* Enable VBus control for UHP ports */ for (i = 0; i < data->ports; i++) { if (data->vbus_pin[i]) -@@ -84,6 +89,110 @@ +@@ -84,6 +89,110 @@ void __init at91_add_device_usbh(struct /* -------------------------------------------------------------------- @@ -407,7 +403,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91cap9_devices.c linux-2.6/ar * Ethernet * -------------------------------------------------------------------- */ -@@ -246,7 +355,7 @@ +@@ -246,7 +355,7 @@ void __init at91_add_device_mmc(short mm } mmc0_data = *data; @@ -416,7 +412,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91cap9_devices.c linux-2.6/ar platform_device_register(&at91cap9_mmc0_device); } else { /* MCI1 */ /* CLK */ -@@ -283,10 +392,15 @@ +@@ -283,10 +392,15 @@ static struct at91_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 static struct resource nand_resources[] = { @@ -433,7 +429,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91cap9_devices.c linux-2.6/ar } }; -@@ -344,6 +458,7 @@ +@@ -344,6 +458,7 @@ void __init at91_add_device_nand(struct void __init at91_add_device_nand(struct at91_nand_data *data) {} #endif @@ -441,7 +437,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91cap9_devices.c linux-2.6/ar /* -------------------------------------------------------------------- * TWI (i2c) * -------------------------------------------------------------------- */ -@@ -532,17 +647,64 @@ +@@ -532,17 +647,64 @@ void __init at91_add_device_spi(struct s /* -------------------------------------------------------------------- @@ -508,7 +504,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91cap9_devices.c linux-2.6/ar platform_device_register(&at91cap9_rtt_device); } -@@ -660,6 +822,9 @@ +@@ -660,6 +822,9 @@ void __init at91_add_device_lcdc(struct if (!data) return; @@ -518,7 +514,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91cap9_devices.c linux-2.6/ar at91_set_A_periph(AT91_PIN_PC1, 0); /* LCDHSYNC */ at91_set_A_periph(AT91_PIN_PC2, 0); /* LCDDOTCK */ at91_set_A_periph(AT91_PIN_PC3, 0); /* LCDDEN */ -@@ -990,7 +1155,7 @@ +@@ -990,7 +1155,7 @@ static inline void configure_usart2_pins at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ } @@ -527,7 +523,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91cap9_devices.c linux-2.6/ar struct platform_device *atmel_default_console_device; /* the serial console device */ void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) -@@ -1031,8 +1196,6 @@ +@@ -1031,8 +1196,6 @@ void __init at91_set_serial_console(unsi { if (portnr < ATMEL_MAX_UART) atmel_default_console_device = at91_uarts[portnr]; @@ -536,7 +532,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91cap9_devices.c linux-2.6/ar } void __init at91_add_device_serial(void) -@@ -1043,6 +1206,9 @@ +@@ -1043,6 +1206,9 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } @@ -546,7 +542,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91cap9_devices.c linux-2.6/ar } #else void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} -@@ -1060,6 +1226,7 @@ +@@ -1060,6 +1226,7 @@ static int __init at91_add_standard_devi { at91_add_device_rtt(); at91_add_device_watchdog(); @@ -554,10 +550,9 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91cap9_devices.c linux-2.6/ar return 0; } -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6/arch/arm/mach-at91/at91rm9200_devices.c ---- linux-2.6.25/arch/arm/mach-at91/at91rm9200_devices.c 2008-05-03 00:15:44.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91rm9200_devices.c 2008-04-25 21:15:43.000000000 +0200 -@@ -513,7 +513,18 @@ +--- a/arch/arm/mach-at91/at91rm9200_devices.c ++++ b/arch/arm/mach-at91/at91rm9200_devices.c +@@ -513,7 +513,18 @@ void __init at91_add_device_i2c(struct i * SPI * -------------------------------------------------------------------- */ @@ -577,7 +572,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6/ static u64 spi_dmamask = DMA_BIT_MASK(32); static struct resource spi_resources[] = { -@@ -530,7 +541,7 @@ +@@ -530,7 +541,7 @@ static struct resource spi_resources[] = }; static struct platform_device at91rm9200_spi_device = { @@ -586,7 +581,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6/ .id = 0, .dev = { .dma_mask = &spi_dmamask, -@@ -563,6 +574,12 @@ +@@ -563,6 +574,12 @@ void __init at91_add_device_spi(struct s else at91_set_gpio_output(cs_pin, 1); @@ -599,7 +594,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6/ /* pass chip-select pin to driver */ devices[i].controller_data = (void *) cs_pin; -@@ -577,6 +594,90 @@ +@@ -577,6 +594,90 @@ void __init at91_add_device_spi(struct s /* -------------------------------------------------------------------- @@ -690,7 +685,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6/ * RTC * -------------------------------------------------------------------- */ -@@ -589,6 +690,7 @@ +@@ -589,6 +690,7 @@ static struct platform_device at91rm9200 static void __init at91_add_device_rtc(void) { @@ -698,7 +693,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6/ platform_device_register(&at91rm9200_rtc_device); } #else -@@ -1019,7 +1121,7 @@ +@@ -1019,7 +1121,7 @@ static inline void configure_usart3_pins at91_set_B_periph(AT91_PIN_PB0, 0); /* RTS3 */ } @@ -707,7 +702,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6/ struct platform_device *atmel_default_console_device; /* the serial console device */ void __init __deprecated at91_init_serial(struct at91_uart_config *config) -@@ -1110,8 +1212,6 @@ +@@ -1110,8 +1212,6 @@ void __init at91_set_serial_console(unsi { if (portnr < ATMEL_MAX_UART) atmel_default_console_device = at91_uarts[portnr]; @@ -716,7 +711,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6/ } void __init at91_add_device_serial(void) -@@ -1122,6 +1222,9 @@ +@@ -1122,6 +1222,9 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } @@ -726,7 +721,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6/ } #else void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} -@@ -1141,6 +1244,7 @@ +@@ -1141,6 +1244,7 @@ static int __init at91_add_standard_devi { at91_add_device_rtc(); at91_add_device_watchdog(); @@ -734,10 +729,9 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91rm9200_devices.c linux-2.6/ return 0; } -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91rm9200_time.c linux-2.6/arch/arm/mach-at91/at91rm9200_time.c ---- linux-2.6.25/arch/arm/mach-at91/at91rm9200_time.c 2008-05-03 00:15:33.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91rm9200_time.c 2008-04-25 21:15:43.000000000 +0200 -@@ -136,8 +136,6 @@ +--- a/arch/arm/mach-at91/at91rm9200_time.c ++++ b/arch/arm/mach-at91/at91rm9200_time.c +@@ -136,8 +136,6 @@ clkevt32k_next_event(unsigned long delta u32 alm; int status = 0; @@ -746,9 +740,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91rm9200_time.c linux-2.6/arc /* Use "raw" primitives so we behave correctly on RT kernels. */ raw_local_irq_save(flags); -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9260.c linux-2.6/arch/arm/mach-at91/at91sam9260.c ---- linux-2.6.25/arch/arm/mach-at91/at91sam9260.c 2008-05-03 00:15:44.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91sam9260.c 2008-04-25 21:15:43.000000000 +0200 +--- a/arch/arm/mach-at91/at91sam9260.c ++++ b/arch/arm/mach-at91/at91sam9260.c @@ -11,6 +11,7 @@ */ @@ -765,7 +758,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9260.c linux-2.6/arch/ar #include "generic.h" #include "clock.h" -@@ -267,6 +269,11 @@ +@@ -267,6 +269,11 @@ static void at91sam9260_reset(void) at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } @@ -777,7 +770,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9260.c linux-2.6/arch/ar /* -------------------------------------------------------------------- * AT91SAM9260 processor initialization -@@ -304,6 +311,7 @@ +@@ -304,6 +311,7 @@ void __init at91sam9260_initialize(unsig iotable_init(at91sam9260_sram_desc, ARRAY_SIZE(at91sam9260_sram_desc)); at91_arch_reset = at91sam9260_reset; @@ -785,9 +778,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9260.c linux-2.6/arch/ar at91_extern_irq = (1 << AT91SAM9260_ID_IRQ0) | (1 << AT91SAM9260_ID_IRQ1) | (1 << AT91SAM9260_ID_IRQ2); -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6/arch/arm/mach-at91/at91sam9260_devices.c ---- linux-2.6.25/arch/arm/mach-at91/at91sam9260_devices.c 2008-05-03 00:15:44.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91sam9260_devices.c 2008-04-25 21:15:43.000000000 +0200 +--- a/arch/arm/mach-at91/at91sam9260_devices.c ++++ b/arch/arm/mach-at91/at91sam9260_devices.c @@ -19,8 +19,8 @@ #include #include @@ -798,7 +790,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6 #include "generic.h" -@@ -288,10 +288,15 @@ +@@ -288,10 +288,15 @@ static struct at91_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 static struct resource nand_resources[] = { @@ -815,7 +807,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6 } }; -@@ -540,6 +545,90 @@ +@@ -540,6 +545,90 @@ void __init at91_add_device_spi(struct s /* -------------------------------------------------------------------- @@ -906,7 +898,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6 * RTT * -------------------------------------------------------------------- */ -@@ -553,13 +642,14 @@ +@@ -553,13 +642,14 @@ static struct resource rtt_resources[] = static struct platform_device at91sam9260_rtt_device = { .name = "at91_rtt", @@ -922,7 +914,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6 platform_device_register(&at91sam9260_rtt_device); } -@@ -962,7 +1052,7 @@ +@@ -962,7 +1052,7 @@ static inline void configure_usart5_pins at91_set_A_periph(AT91_PIN_PB13, 0); /* RXD5 */ } @@ -931,7 +923,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6 struct platform_device *atmel_default_console_device; /* the serial console device */ void __init __deprecated at91_init_serial(struct at91_uart_config *config) -@@ -1073,8 +1163,6 @@ +@@ -1073,8 +1163,6 @@ void __init at91_set_serial_console(unsi { if (portnr < ATMEL_MAX_UART) atmel_default_console_device = at91_uarts[portnr]; @@ -940,7 +932,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6 } void __init at91_add_device_serial(void) -@@ -1085,6 +1173,9 @@ +@@ -1085,6 +1173,9 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } @@ -950,7 +942,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6 } #else void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} -@@ -1103,6 +1194,7 @@ +@@ -1103,6 +1194,7 @@ static int __init at91_add_standard_devi { at91_add_device_rtt(); at91_add_device_watchdog(); @@ -958,9 +950,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9260_devices.c linux-2.6 return 0; } -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9261.c linux-2.6/arch/arm/mach-at91/at91sam9261.c ---- linux-2.6.25/arch/arm/mach-at91/at91sam9261.c 2008-05-03 00:15:44.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91sam9261.c 2008-04-25 21:15:43.000000000 +0200 +--- a/arch/arm/mach-at91/at91sam9261.c ++++ b/arch/arm/mach-at91/at91sam9261.c @@ -11,12 +11,14 @@ */ @@ -976,7 +967,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9261.c linux-2.6/arch/ar #include "generic.h" #include "clock.h" -@@ -245,6 +247,11 @@ +@@ -245,6 +247,11 @@ static void at91sam9261_reset(void) at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } @@ -988,7 +979,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9261.c linux-2.6/arch/ar /* -------------------------------------------------------------------- * AT91SAM9261 processor initialization -@@ -256,6 +263,7 @@ +@@ -256,6 +263,7 @@ void __init at91sam9261_initialize(unsig iotable_init(at91sam9261_io_desc, ARRAY_SIZE(at91sam9261_io_desc)); at91_arch_reset = at91sam9261_reset; @@ -996,9 +987,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9261.c linux-2.6/arch/ar at91_extern_irq = (1 << AT91SAM9261_ID_IRQ0) | (1 << AT91SAM9261_ID_IRQ1) | (1 << AT91SAM9261_ID_IRQ2); -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6/arch/arm/mach-at91/at91sam9261_devices.c ---- linux-2.6.25/arch/arm/mach-at91/at91sam9261_devices.c 2008-05-03 00:15:44.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91sam9261_devices.c 2008-04-25 21:15:43.000000000 +0200 +--- a/arch/arm/mach-at91/at91sam9261_devices.c ++++ b/arch/arm/mach-at91/at91sam9261_devices.c @@ -24,7 +24,7 @@ #include #include @@ -1008,7 +998,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6 #include "generic.h" -@@ -548,6 +548,55 @@ +@@ -548,6 +548,55 @@ void __init at91_add_device_lcdc(struct /* -------------------------------------------------------------------- @@ -1064,7 +1054,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6 * RTT * -------------------------------------------------------------------- */ -@@ -561,13 +610,14 @@ +@@ -561,13 +610,14 @@ static struct resource rtt_resources[] = static struct platform_device at91sam9261_rtt_device = { .name = "at91_rtt", @@ -1080,7 +1070,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6 platform_device_register(&at91sam9261_rtt_device); } -@@ -938,7 +988,7 @@ +@@ -938,7 +988,7 @@ static inline void configure_usart2_pins at91_set_B_periph(AT91_PIN_PA16, 0); /* CTS2 */ } @@ -1089,7 +1079,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6 struct platform_device *atmel_default_console_device; /* the serial console device */ void __init __deprecated at91_init_serial(struct at91_uart_config *config) -@@ -1019,8 +1069,6 @@ +@@ -1019,8 +1069,6 @@ void __init at91_set_serial_console(unsi { if (portnr < ATMEL_MAX_UART) atmel_default_console_device = at91_uarts[portnr]; @@ -1098,7 +1088,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6 } void __init at91_add_device_serial(void) -@@ -1031,6 +1079,9 @@ +@@ -1031,6 +1079,9 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } @@ -1108,7 +1098,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6 } #else void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} -@@ -1050,6 +1101,7 @@ +@@ -1050,6 +1101,7 @@ static int __init at91_add_standard_devi { at91_add_device_rtt(); at91_add_device_watchdog(); @@ -1116,9 +1106,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9261_devices.c linux-2.6 return 0; } -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9263.c linux-2.6/arch/arm/mach-at91/at91sam9263.c ---- linux-2.6.25/arch/arm/mach-at91/at91sam9263.c 2008-05-03 00:15:44.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91sam9263.c 2008-04-25 21:15:43.000000000 +0200 +--- a/arch/arm/mach-at91/at91sam9263.c ++++ b/arch/arm/mach-at91/at91sam9263.c @@ -11,12 +11,14 @@ */ @@ -1134,7 +1123,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9263.c linux-2.6/arch/ar #include "generic.h" #include "clock.h" -@@ -271,6 +273,11 @@ +@@ -271,6 +273,11 @@ static void at91sam9263_reset(void) at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } @@ -1146,7 +1135,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9263.c linux-2.6/arch/ar /* -------------------------------------------------------------------- * AT91SAM9263 processor initialization -@@ -282,6 +289,7 @@ +@@ -282,6 +289,7 @@ void __init at91sam9263_initialize(unsig iotable_init(at91sam9263_io_desc, ARRAY_SIZE(at91sam9263_io_desc)); at91_arch_reset = at91sam9263_reset; @@ -1154,9 +1143,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9263.c linux-2.6/arch/ar at91_extern_irq = (1 << AT91SAM9263_ID_IRQ0) | (1 << AT91SAM9263_ID_IRQ1); /* Init clock subsystem */ -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6/arch/arm/mach-at91/at91sam9263_devices.c ---- linux-2.6.25/arch/arm/mach-at91/at91sam9263_devices.c 2008-05-03 00:15:44.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91sam9263_devices.c 2008-04-25 21:16:23.000000000 +0200 +--- a/arch/arm/mach-at91/at91sam9263_devices.c ++++ b/arch/arm/mach-at91/at91sam9263_devices.c @@ -22,8 +22,8 @@ #include #include @@ -1167,7 +1155,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6 #include "generic.h" -@@ -308,7 +308,7 @@ +@@ -308,7 +308,7 @@ void __init at91_add_device_mmc(short mm } mmc0_data = *data; @@ -1176,7 +1164,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6 platform_device_register(&at91sam9263_mmc0_device); } else { /* MCI1 */ /* CLK */ -@@ -358,10 +358,15 @@ +@@ -358,10 +358,15 @@ static struct at91_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 static struct resource nand_resources[] = { @@ -1193,7 +1181,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6 } }; -@@ -783,6 +788,43 @@ +@@ -783,6 +788,43 @@ void __init at91_add_device_isi(void) {} /* -------------------------------------------------------------------- @@ -1237,7 +1225,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6 * RTT * -------------------------------------------------------------------- */ -@@ -818,7 +860,9 @@ +@@ -818,7 +860,9 @@ static struct platform_device at91sam926 static void __init at91_add_device_rtt(void) { @@ -1247,7 +1235,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6 platform_device_register(&at91sam9263_rtt1_device); } -@@ -933,9 +977,6 @@ +@@ -933,9 +977,6 @@ static inline void configure_ssc1_pins(u } /* @@ -1257,7 +1245,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6 * SSC controllers are accessed through library code, instead of any * kind of all-singing/all-dancing driver. For example one could be * used by a particular I2S audio codec's driver, while another one -@@ -1146,7 +1187,7 @@ +@@ -1146,7 +1187,7 @@ static inline void configure_usart2_pins at91_set_B_periph(AT91_PIN_PD6, 0); /* CTS2 */ } @@ -1266,7 +1254,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6 struct platform_device *atmel_default_console_device; /* the serial console device */ void __init __deprecated at91_init_serial(struct at91_uart_config *config) -@@ -1227,8 +1268,6 @@ +@@ -1227,8 +1268,6 @@ void __init at91_set_serial_console(unsi { if (portnr < ATMEL_MAX_UART) atmel_default_console_device = at91_uarts[portnr]; @@ -1275,7 +1263,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6 } void __init at91_add_device_serial(void) -@@ -1239,9 +1278,12 @@ +@@ -1239,9 +1278,12 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } @@ -1289,7 +1277,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6 void __init at91_register_uart(unsigned id, unsigned portnr, unsigned pins) {} void __init at91_set_serial_console(unsigned portnr) {} void __init at91_add_device_serial(void) {} -@@ -1257,6 +1299,7 @@ +@@ -1257,6 +1299,7 @@ static int __init at91_add_standard_devi { at91_add_device_rtt(); at91_add_device_watchdog(); @@ -1297,9 +1285,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9263_devices.c linux-2.6 return 0; } -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam926x_time.c linux-2.6/arch/arm/mach-at91/at91sam926x_time.c ---- linux-2.6.25/arch/arm/mach-at91/at91sam926x_time.c 2008-05-03 00:15:44.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91sam926x_time.c 2008-04-25 21:15:43.000000000 +0200 +--- a/arch/arm/mach-at91/at91sam926x_time.c ++++ b/arch/arm/mach-at91/at91sam926x_time.c @@ -1,23 +1,20 @@ /* - * linux/arch/arm/mach-at91/at91sam926x_time.c @@ -1534,9 +1521,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam926x_time.c linux-2.6/ar + .resume = at91sam926x_pit_reset, }; - -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9rl.c linux-2.6/arch/arm/mach-at91/at91sam9rl.c ---- linux-2.6.25/arch/arm/mach-at91/at91sam9rl.c 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91sam9rl.c 2008-04-25 21:15:43.000000000 +0200 +--- a/arch/arm/mach-at91/at91sam9rl.c ++++ b/arch/arm/mach-at91/at91sam9rl.c @@ -10,6 +10,7 @@ */ @@ -1553,7 +1539,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9rl.c linux-2.6/arch/arm #include "generic.h" #include "clock.h" -@@ -244,6 +246,11 @@ +@@ -244,6 +246,11 @@ static void at91sam9rl_reset(void) at91_sys_write(AT91_RSTC_CR, AT91_RSTC_KEY | AT91_RSTC_PROCRST | AT91_RSTC_PERRST); } @@ -1565,7 +1551,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9rl.c linux-2.6/arch/arm /* -------------------------------------------------------------------- * AT91SAM9RL processor initialization -@@ -274,6 +281,7 @@ +@@ -274,6 +281,7 @@ void __init at91sam9rl_initialize(unsign iotable_init(at91sam9rl_sram_desc, ARRAY_SIZE(at91sam9rl_sram_desc)); at91_arch_reset = at91sam9rl_reset; @@ -1573,9 +1559,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9rl.c linux-2.6/arch/arm at91_extern_irq = (1 << AT91SAM9RL_ID_IRQ0); /* Init clock subsystem */ -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6/arch/arm/mach-at91/at91sam9rl_devices.c ---- linux-2.6.25/arch/arm/mach-at91/at91sam9rl_devices.c 2008-05-03 00:15:44.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/at91sam9rl_devices.c 2008-05-02 00:52:36.000000000 +0200 +--- a/arch/arm/mach-at91/at91sam9rl_devices.c ++++ b/arch/arm/mach-at91/at91sam9rl_devices.c @@ -20,12 +20,107 @@ #include #include @@ -1685,7 +1670,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6/ * MMC / SD * -------------------------------------------------------------------- */ -@@ -105,10 +200,15 @@ +@@ -105,10 +200,15 @@ static struct at91_nand_data nand_data; #define NAND_BASE AT91_CHIPSELECT_3 static struct resource nand_resources[] = { @@ -1702,7 +1687,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6/ } }; -@@ -385,6 +485,100 @@ +@@ -385,6 +485,100 @@ void __init at91_add_device_lcdc(struct /* -------------------------------------------------------------------- @@ -1803,7 +1788,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6/ * RTC * -------------------------------------------------------------------- */ -@@ -397,6 +591,7 @@ +@@ -397,6 +591,7 @@ static struct platform_device at91sam9rl static void __init at91_add_device_rtc(void) { @@ -1811,7 +1796,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6/ platform_device_register(&at91sam9rl_rtc_device); } #else -@@ -418,13 +613,14 @@ +@@ -418,13 +613,14 @@ static struct resource rtt_resources[] = static struct platform_device at91sam9rl_rtt_device = { .name = "at91_rtt", @@ -1827,7 +1812,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6/ platform_device_register(&at91sam9rl_rtt_device); } -@@ -539,9 +735,6 @@ +@@ -539,9 +735,6 @@ static inline void configure_ssc1_pins(u } /* @@ -1837,7 +1822,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6/ * SSC controllers are accessed through library code, instead of any * kind of all-singing/all-dancing driver. For example one could be * used by a particular I2S audio codec's driver, while another one -@@ -802,7 +995,7 @@ +@@ -802,7 +995,7 @@ static inline void configure_usart3_pins at91_set_B_periph(AT91_PIN_PD3, 0); /* CTS3 */ } @@ -1846,7 +1831,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6/ struct platform_device *atmel_default_console_device; /* the serial console device */ void __init __deprecated at91_init_serial(struct at91_uart_config *config) -@@ -893,8 +1086,6 @@ +@@ -893,8 +1086,6 @@ void __init at91_set_serial_console(unsi { if (portnr < ATMEL_MAX_UART) atmel_default_console_device = at91_uarts[portnr]; @@ -1855,7 +1840,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6/ } void __init at91_add_device_serial(void) -@@ -905,6 +1096,9 @@ +@@ -905,6 +1096,9 @@ void __init at91_add_device_serial(void) if (at91_uarts[i]) platform_device_register(at91_uarts[i]); } @@ -1865,7 +1850,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6/ } #else void __init __deprecated at91_init_serial(struct at91_uart_config *config) {} -@@ -925,6 +1119,7 @@ +@@ -925,6 +1119,7 @@ static int __init at91_add_standard_devi at91_add_device_rtc(); at91_add_device_rtt(); at91_add_device_watchdog(); @@ -1873,9 +1858,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/at91sam9rl_devices.c linux-2.6/ return 0; } -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-cam60.c linux-2.6/arch/arm/mach-at91/board-cam60.c ---- linux-2.6.25/arch/arm/mach-at91/board-cam60.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-cam60.c 2008-04-25 21:15:43.000000000 +0200 +--- /dev/null ++++ b/arch/arm/mach-at91/board-cam60.c @@ -0,0 +1,180 @@ +/* + * KwikByte CAM60 (KB9260) @@ -2057,9 +2041,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-cam60.c linux-2.6/arch/ar + .init_irq = cam60_init_irq, + .init_machine = cam60_board_init, +MACHINE_END -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-cap9adk.c linux-2.6/arch/arm/mach-at91/board-cap9adk.c ---- linux-2.6.25/arch/arm/mach-at91/board-cap9adk.c 2008-05-03 00:15:44.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-cap9adk.c 2008-05-05 22:01:39.000000000 +0200 +--- a/arch/arm/mach-at91/board-cap9adk.c ++++ b/arch/arm/mach-at91/board-cap9adk.c @@ -36,16 +36,14 @@ #include #include @@ -2078,7 +2061,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-cap9adk.c linux-2.6/arch/ #include "generic.h" -@@ -78,6 +76,12 @@ +@@ -78,6 +76,12 @@ static struct at91_usbh_data __initdata .ports = 2, }; @@ -2091,7 +2074,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-cap9adk.c linux-2.6/arch/ /* * ADS7846 Touchscreen -@@ -130,7 +134,7 @@ +@@ -130,7 +134,7 @@ static struct spi_board_info cap9adk_spi { .modalias = "ads7846", .chip_select = 3, /* can be 2 or 3, depending on J2 jumper */ @@ -2100,7 +2083,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-cap9adk.c linux-2.6/arch/ .bus_num = 0, .platform_data = &ads_info, .irq = AT91_PIN_PC4, -@@ -324,8 +328,9 @@ +@@ -324,8 +328,9 @@ static void __init cap9adk_board_init(vo /* Serial */ at91_add_device_serial(); /* USB Host */ @@ -2111,7 +2094,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-cap9adk.c linux-2.6/arch/ /* SPI */ at91_add_device_spi(cap9adk_spi_devices, ARRAY_SIZE(cap9adk_spi_devices)); /* Touchscreen */ -@@ -341,7 +346,6 @@ +@@ -341,7 +346,6 @@ static void __init cap9adk_board_init(vo /* I2C */ at91_add_device_i2c(NULL, 0); /* LCD Controller */ @@ -2119,9 +2102,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-cap9adk.c linux-2.6/arch/ at91_add_device_lcdc(&cap9adk_lcdc_data); /* AC97 */ at91_add_device_ac97(&cap9adk_ac97_data); -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-carmeva.c linux-2.6/arch/arm/mach-at91/board-carmeva.c ---- linux-2.6.25/arch/arm/mach-at91/board-carmeva.c 2008-05-03 00:15:33.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-carmeva.c 2008-04-25 21:15:43.000000000 +0200 +--- a/arch/arm/mach-at91/board-carmeva.c ++++ b/arch/arm/mach-at91/board-carmeva.c @@ -40,24 +40,21 @@ #include "generic.h" @@ -2157,7 +2139,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-carmeva.c linux-2.6/arch/ } static void __init carmeva_init_irq(void) -@@ -117,6 +114,30 @@ +@@ -117,6 +114,30 @@ static struct spi_board_info carmeva_spi }, }; @@ -2188,7 +2170,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-carmeva.c linux-2.6/arch/ static void __init carmeva_board_init(void) { /* Serial */ -@@ -135,6 +156,8 @@ +@@ -135,6 +156,8 @@ static void __init carmeva_board_init(vo // at91_add_device_cf(&carmeva_cf_data); /* MMC */ at91_add_device_mmc(0, &carmeva_mmc_data); @@ -2197,9 +2179,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-carmeva.c linux-2.6/arch/ } MACHINE_START(CARMEVA, "Carmeva") -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-chub.c linux-2.6/arch/arm/mach-at91/board-chub.c ---- linux-2.6.25/arch/arm/mach-at91/board-chub.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-chub.c 2008-04-25 21:15:43.000000000 +0200 +--- /dev/null ++++ b/arch/arm/mach-at91/board-chub.c @@ -0,0 +1,132 @@ +/* + * linux/arch/arm/mach-at91/board-chub.c @@ -2333,10 +2314,9 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-chub.c linux-2.6/arch/arm + .init_irq = chub_init_irq, + .init_machine = chub_board_init, +MACHINE_END -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-csb337.c linux-2.6/arch/arm/mach-at91/board-csb337.c ---- linux-2.6.25/arch/arm/mach-at91/board-csb337.c 2008-05-03 00:15:44.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-csb337.c 2008-05-02 00:05:42.000000000 +0200 -@@ -61,6 +61,7 @@ +--- a/arch/arm/mach-at91/board-csb337.c ++++ b/arch/arm/mach-at91/board-csb337.c +@@ -61,6 +61,7 @@ static void __init csb337_map_io(void) /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB0, AT91_PIN_PB1); @@ -2344,7 +2324,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-csb337.c linux-2.6/arch/a /* Setup the serial ports and console */ at91_init_serial(&csb337_uart_config); -@@ -202,11 +203,11 @@ +@@ -202,11 +203,11 @@ static struct platform_device csb300_but static void __init csb300_add_device_buttons(void) { @@ -2359,7 +2339,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-csb337.c linux-2.6/arch/a at91_set_deglitch(AT91_PIN_PA21, 1); platform_device_register(&csb300_button_device); -@@ -233,7 +234,7 @@ +@@ -233,7 +234,7 @@ static struct gpio_led csb_leds[] = { .gpio = AT91_PIN_PB0, .active_low = 1, .default_trigger = "ide-disk", @@ -2368,9 +2348,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-csb337.c linux-2.6/arch/a }; -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-csb637.c linux-2.6/arch/arm/mach-at91/board-csb637.c ---- linux-2.6.25/arch/arm/mach-at91/board-csb637.c 2008-05-03 00:15:33.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-csb637.c 2008-04-25 21:15:43.000000000 +0200 +--- a/arch/arm/mach-at91/board-csb637.c ++++ b/arch/arm/mach-at91/board-csb637.c @@ -40,27 +40,16 @@ #include "generic.h" @@ -2403,7 +2382,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-csb637.c linux-2.6/arch/a } static void __init csb637_init_irq(void) -@@ -118,8 +107,19 @@ +@@ -118,8 +107,19 @@ static struct platform_device csb_flash .num_resources = ARRAY_SIZE(csb_flash_resources), }; @@ -2423,9 +2402,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-csb637.c linux-2.6/arch/a /* Serial */ at91_add_device_serial(); /* Ethernet */ -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-dk.c linux-2.6/arch/arm/mach-at91/board-dk.c ---- linux-2.6.25/arch/arm/mach-at91/board-dk.c 2008-05-03 00:15:44.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-dk.c 2008-05-03 00:44:06.000000000 +0200 +--- a/arch/arm/mach-at91/board-dk.c ++++ b/arch/arm/mach-at91/board-dk.c @@ -25,6 +25,7 @@ #include #include @@ -2452,7 +2430,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-dk.c linux-2.6/arch/arm/m static void __init dk_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ -@@ -64,8 +54,16 @@ +@@ -64,8 +54,16 @@ static void __init dk_map_io(void) /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB2, AT91_PIN_PB2); @@ -2471,7 +2449,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-dk.c linux-2.6/arch/arm/m } static void __init dk_init_irq(void) -@@ -73,6 +71,185 @@ +@@ -73,6 +71,185 @@ static void __init dk_init_irq(void) at91rm9200_init_interrupts(NULL); } @@ -2657,7 +2635,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-dk.c linux-2.6/arch/arm/m static struct at91_eth_data __initdata dk_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, -@@ -164,7 +341,7 @@ +@@ -164,7 +341,7 @@ static struct at91_nand_data __initdata #define DK_FLASH_SIZE 0x200000 static struct physmap_flash_data dk_flash_data = { @@ -2666,7 +2644,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-dk.c linux-2.6/arch/arm/m }; static struct resource dk_flash_resource = { -@@ -223,8 +400,12 @@ +@@ -223,8 +400,12 @@ static void __init dk_board_init(void) platform_device_register(&dk_flash); /* LEDs */ at91_gpio_leds(dk_leds, ARRAY_SIZE(dk_leds)); @@ -2680,9 +2658,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-dk.c linux-2.6/arch/arm/m } MACHINE_START(AT91RM9200DK, "Atmel AT91RM9200-DK") -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-eb9200.c linux-2.6/arch/arm/mach-at91/board-eb9200.c ---- linux-2.6.25/arch/arm/mach-at91/board-eb9200.c 2008-05-03 00:15:33.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-eb9200.c 2008-04-25 21:15:43.000000000 +0200 +--- a/arch/arm/mach-at91/board-eb9200.c ++++ b/arch/arm/mach-at91/board-eb9200.c @@ -40,24 +40,24 @@ #include "generic.h" @@ -2721,9 +2698,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-eb9200.c linux-2.6/arch/a } static void __init eb9200_init_irq(void) -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-ecbat91.c linux-2.6/arch/arm/mach-at91/board-ecbat91.c ---- linux-2.6.25/arch/arm/mach-at91/board-ecbat91.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-ecbat91.c 2008-04-25 21:15:43.000000000 +0200 +--- /dev/null ++++ b/arch/arm/mach-at91/board-ecbat91.c @@ -0,0 +1,178 @@ +/* + * linux/arch/arm/mach-at91rm9200/board-ecbat91.c @@ -2903,9 +2879,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-ecbat91.c linux-2.6/arch/ + .init_irq = ecb_at91init_irq, + .init_machine = ecb_at91board_init, +MACHINE_END -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-ek.c linux-2.6/arch/arm/mach-at91/board-ek.c ---- linux-2.6.25/arch/arm/mach-at91/board-ek.c 2008-05-03 00:15:44.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-ek.c 2008-05-03 00:44:38.000000000 +0200 +--- a/arch/arm/mach-at91/board-ek.c ++++ b/arch/arm/mach-at91/board-ek.c @@ -25,6 +25,7 @@ #include #include @@ -2932,7 +2907,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-ek.c linux-2.6/arch/arm/m static void __init ek_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ -@@ -64,8 +54,16 @@ +@@ -64,8 +54,16 @@ static void __init ek_map_io(void) /* Setup the LEDs */ at91_init_leds(AT91_PIN_PB1, AT91_PIN_PB2); @@ -2951,7 +2926,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-ek.c linux-2.6/arch/arm/m } static void __init ek_init_irq(void) -@@ -73,6 +71,187 @@ +@@ -73,6 +71,187 @@ static void __init ek_init_irq(void) at91rm9200_init_interrupts(NULL); } @@ -3139,7 +3114,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-ek.c linux-2.6/arch/arm/m static struct at91_eth_data __initdata ek_eth_data = { .phy_irq_pin = AT91_PIN_PC4, .is_rmii = 1, -@@ -122,7 +301,7 @@ +@@ -122,7 +301,7 @@ static struct i2c_board_info __initdata #define EK_FLASH_SIZE 0x200000 static struct physmap_flash_data ek_flash_data = { @@ -3148,7 +3123,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-ek.c linux-2.6/arch/arm/m }; static struct resource ek_flash_resource = { -@@ -189,7 +368,7 @@ +@@ -189,7 +368,7 @@ static void __init ek_board_init(void) /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); /* VGA */ @@ -3157,9 +3132,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-ek.c linux-2.6/arch/arm/m } MACHINE_START(AT91RM9200EK, "Atmel AT91RM9200-EK") -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-homematic.c linux-2.6/arch/arm/mach-at91/board-homematic.c ---- linux-2.6.25/arch/arm/mach-at91/board-homematic.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-homematic.c 2008-04-25 21:15:43.000000000 +0200 +--- /dev/null ++++ b/arch/arm/mach-at91/board-homematic.c @@ -0,0 +1,163 @@ +/* + * linux/arch/arm/mach-at91/board-homematic.c @@ -3324,9 +3298,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-homematic.c linux-2.6/arc + .init_irq = homematic_init_irq, + .init_machine = homematic_board_init, +MACHINE_END -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-kb9202.c linux-2.6/arch/arm/mach-at91/board-kb9202.c ---- linux-2.6.25/arch/arm/mach-at91/board-kb9202.c 2008-05-03 00:15:33.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-kb9202.c 2008-04-25 21:15:43.000000000 +0200 +--- a/arch/arm/mach-at91/board-kb9202.c ++++ b/arch/arm/mach-at91/board-kb9202.c @@ -37,19 +37,10 @@ #include #include @@ -3349,7 +3322,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-kb9202.c linux-2.6/arch/a static void __init kb9202_map_io(void) { -@@ -59,8 +50,20 @@ +@@ -59,8 +50,20 @@ static void __init kb9202_map_io(void) /* Set up the LEDs */ at91_init_leds(AT91_PIN_PC19, AT91_PIN_PC18); @@ -3372,7 +3345,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-kb9202.c linux-2.6/arch/a } static void __init kb9202_init_irq(void) -@@ -111,6 +114,48 @@ +@@ -111,6 +114,48 @@ static struct at91_nand_data __initdata .partition_info = nand_partitions, }; @@ -3421,7 +3394,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-kb9202.c linux-2.6/arch/a static void __init kb9202_board_init(void) { /* Serial */ -@@ -129,6 +174,8 @@ +@@ -129,6 +174,8 @@ static void __init kb9202_board_init(voi at91_add_device_spi(NULL, 0); /* NAND */ at91_add_device_nand(&kb9202_nand_data); @@ -3430,9 +3403,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-kb9202.c linux-2.6/arch/a } MACHINE_START(KB9200, "KB920x") -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-qil-a9260.c linux-2.6/arch/arm/mach-at91/board-qil-a9260.c ---- linux-2.6.25/arch/arm/mach-at91/board-qil-a9260.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-qil-a9260.c 2008-04-25 21:15:43.000000000 +0200 +--- /dev/null ++++ b/arch/arm/mach-at91/board-qil-a9260.c @@ -0,0 +1,255 @@ +/* + * linux/arch/arm/mach-at91/board-qil-a9260.c @@ -3689,9 +3661,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-qil-a9260.c linux-2.6/arc + .init_irq = ek_init_irq, + .init_machine = ek_board_init, +MACHINE_END -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9-l9260.c linux-2.6/arch/arm/mach-at91/board-sam9-l9260.c ---- linux-2.6.25/arch/arm/mach-at91/board-sam9-l9260.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-sam9-l9260.c 2008-04-25 21:15:43.000000000 +0200 +--- /dev/null ++++ b/arch/arm/mach-at91/board-sam9-l9260.c @@ -0,0 +1,199 @@ +/* + * linux/arch/arm/mach-at91/board-sam9-l9260.c @@ -3892,9 +3863,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9-l9260.c linux-2.6/ar + .init_irq = ek_init_irq, + .init_machine = ek_board_init, +MACHINE_END -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9260ek.c linux-2.6/arch/arm/mach-at91/board-sam9260ek.c ---- linux-2.6.25/arch/arm/mach-at91/board-sam9260ek.c 2008-05-03 00:15:33.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-sam9260ek.c 2008-05-01 23:56:24.000000000 +0200 +--- a/arch/arm/mach-at91/board-sam9260ek.c ++++ b/arch/arm/mach-at91/board-sam9260ek.c @@ -25,6 +25,10 @@ #include #include @@ -3950,7 +3920,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9260ek.c linux-2.6/arc } static void __init ek_init_irq(void) -@@ -85,6 +89,35 @@ +@@ -85,6 +89,35 @@ static struct at91_udc_data __initdata e /* @@ -3986,7 +3956,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9260ek.c linux-2.6/arc * SPI devices. */ static struct spi_board_info ek_spi_devices[] = { -@@ -110,6 +143,8 @@ +@@ -110,6 +143,8 @@ static struct spi_board_info ek_spi_devi .chip_select = 0, .max_speed_hz = 10 * 1000 * 1000, .bus_num = 1, @@ -3995,7 +3965,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9260ek.c linux-2.6/arc }, #endif }; -@@ -172,6 +207,74 @@ +@@ -172,6 +207,74 @@ static struct at91_mmc_data __initdata e // .vcc_pin = ... not connected }; @@ -4070,7 +4040,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9260ek.c linux-2.6/arc static void __init ek_board_init(void) { /* Serial */ -@@ -190,6 +293,16 @@ +@@ -190,6 +293,16 @@ static void __init ek_board_init(void) at91_add_device_mmc(0, &ek_mmc_data); /* I2C */ at91_add_device_i2c(NULL, 0); @@ -4087,9 +4057,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9260ek.c linux-2.6/arc } MACHINE_START(AT91SAM9260EK, "Atmel AT91SAM9260-EK") -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9261ek.c linux-2.6/arch/arm/mach-at91/board-sam9261ek.c ---- linux-2.6.25/arch/arm/mach-at91/board-sam9261ek.c 2008-05-03 00:15:44.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-sam9261ek.c 2008-05-01 23:53:20.000000000 +0200 +--- a/arch/arm/mach-at91/board-sam9261ek.c ++++ b/arch/arm/mach-at91/board-sam9261ek.c @@ -26,6 +26,8 @@ #include #include @@ -4124,7 +4093,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9261ek.c linux-2.6/arc static void __init ek_map_io(void) { /* Initialize processor: 18.432 MHz crystal */ -@@ -68,8 +60,11 @@ +@@ -68,8 +60,11 @@ static void __init ek_map_io(void) /* Setup the LEDs */ at91_init_leds(AT91_PIN_PA13, AT91_PIN_PA14); @@ -4138,7 +4107,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9261ek.c linux-2.6/arc } static void __init ek_init_irq(void) -@@ -239,6 +234,35 @@ +@@ -239,6 +234,35 @@ static void __init ek_add_device_ts(void #endif /* @@ -4174,7 +4143,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9261ek.c linux-2.6/arc * SPI devices */ static struct spi_board_info ek_spi_devices[] = { -@@ -252,10 +276,11 @@ +@@ -252,10 +276,11 @@ static struct spi_board_info ek_spi_devi { .modalias = "ads7846", .chip_select = 2, @@ -4187,7 +4156,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9261ek.c linux-2.6/arc }, #endif #if defined(CONFIG_MTD_AT91_DATAFLASH_CARD) -@@ -271,6 +296,9 @@ +@@ -271,6 +296,9 @@ static struct spi_board_info ek_spi_devi .chip_select = 3, .max_speed_hz = 10 * 1000 * 1000, .bus_num = 0, @@ -4197,7 +4166,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9261ek.c linux-2.6/arc }, #endif }; -@@ -408,24 +436,28 @@ +@@ -408,24 +436,28 @@ static struct gpio_keys_button ek_button .code = BTN_0, .desc = "Button 0", .active_low = 1, @@ -4226,7 +4195,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9261ek.c linux-2.6/arc } }; -@@ -445,13 +477,13 @@ +@@ -445,13 +477,13 @@ static struct platform_device ek_button_ static void __init ek_add_device_buttons(void) { @@ -4244,7 +4213,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9261ek.c linux-2.6/arc at91_set_deglitch(AT91_PIN_PA24, 1); platform_device_register(&ek_button_device); -@@ -460,6 +492,29 @@ +@@ -460,6 +492,29 @@ static void __init ek_add_device_buttons static void __init ek_add_device_buttons(void) {} #endif @@ -4274,7 +4243,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9261ek.c linux-2.6/arc static void __init ek_board_init(void) { /* Serial */ -@@ -481,6 +536,9 @@ +@@ -481,6 +536,9 @@ static void __init ek_board_init(void) at91_add_device_spi(ek_spi_devices, ARRAY_SIZE(ek_spi_devices)); /* Touchscreen */ ek_add_device_ts(); @@ -4284,7 +4253,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9261ek.c linux-2.6/arc #else /* MMC */ at91_add_device_mmc(0, &ek_mmc_data); -@@ -489,6 +547,11 @@ +@@ -489,6 +547,11 @@ static void __init ek_board_init(void) at91_add_device_lcdc(&ek_lcdc_data); /* Push Buttons */ ek_add_device_buttons(); @@ -4296,9 +4265,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9261ek.c linux-2.6/arc } MACHINE_START(AT91SAM9261EK, "Atmel AT91SAM9261-EK") -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9263ek.c linux-2.6/arch/arm/mach-at91/board-sam9263ek.c ---- linux-2.6.25/arch/arm/mach-at91/board-sam9263ek.c 2008-05-03 00:15:44.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-sam9263ek.c 2008-05-01 23:53:20.000000000 +0200 +--- a/arch/arm/mach-at91/board-sam9263ek.c ++++ b/arch/arm/mach-at91/board-sam9263ek.c @@ -43,29 +43,24 @@ #include @@ -4338,7 +4306,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9263ek.c linux-2.6/arc } static void __init ek_init_irq(void) -@@ -141,7 +136,7 @@ +@@ -141,7 +136,7 @@ static struct spi_board_info ek_spi_devi { .modalias = "ads7846", .chip_select = 3, @@ -4347,7 +4315,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9263ek.c linux-2.6/arc .bus_num = 0, .platform_data = &ads_info, .irq = AT91SAM9263_ID_IRQ1, -@@ -301,9 +296,9 @@ +@@ -301,9 +296,9 @@ static struct platform_device ek_button_ static void __init ek_add_device_buttons(void) { @@ -4359,7 +4327,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9263ek.c linux-2.6/arc at91_set_deglitch(AT91_PIN_PC4, 1); platform_device_register(&ek_button_device); -@@ -341,7 +336,7 @@ +@@ -341,7 +336,7 @@ static struct gpio_led ek_leds[] = { .name = "ds3", .gpio = AT91_PIN_PB7, .default_trigger = "heartbeat", @@ -4368,7 +4336,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9263ek.c linux-2.6/arc }; -@@ -374,6 +369,9 @@ +@@ -374,6 +369,9 @@ static void __init ek_board_init(void) at91_add_device_ac97(&ek_ac97_data); /* LEDs */ at91_gpio_leds(ek_leds, ARRAY_SIZE(ek_leds)); @@ -4378,9 +4346,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9263ek.c linux-2.6/arc } MACHINE_START(AT91SAM9263EK, "Atmel AT91SAM9263-EK") -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9rlek.c linux-2.6/arch/arm/mach-at91/board-sam9rlek.c ---- linux-2.6.25/arch/arm/mach-at91/board-sam9rlek.c 2008-05-03 00:15:33.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-sam9rlek.c 2008-04-25 21:15:43.000000000 +0200 +--- a/arch/arm/mach-at91/board-sam9rlek.c ++++ b/arch/arm/mach-at91/board-sam9rlek.c @@ -29,29 +29,24 @@ #include @@ -4420,7 +4387,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9rlek.c linux-2.6/arch } static void __init ek_init_irq(void) -@@ -61,6 +56,14 @@ +@@ -61,6 +56,14 @@ static void __init ek_init_irq(void) /* @@ -4435,7 +4402,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9rlek.c linux-2.6/arch * MCI (SD/MMC) */ static struct at91_mmc_data __initdata ek_mmc_data = { -@@ -180,6 +183,8 @@ +@@ -180,6 +183,8 @@ static void __init ek_board_init(void) { /* Serial */ at91_add_device_serial(); @@ -4444,7 +4411,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9rlek.c linux-2.6/arch /* I2C */ at91_add_device_i2c(NULL, 0); /* NAND */ -@@ -190,6 +195,9 @@ +@@ -190,6 +195,9 @@ static void __init ek_board_init(void) at91_add_device_mmc(0, &ek_mmc_data); /* LCD Controller */ at91_add_device_lcdc(&ek_lcdc_data); @@ -4454,9 +4421,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-sam9rlek.c linux-2.6/arch } MACHINE_START(AT91SAM9RLEK, "Atmel AT91SAM9RL-EK") -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-tms.c linux-2.6/arch/arm/mach-at91/board-tms.c ---- linux-2.6.25/arch/arm/mach-at91/board-tms.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-tms.c 2008-04-25 21:15:43.000000000 +0200 +--- /dev/null ++++ b/arch/arm/mach-at91/board-tms.c @@ -0,0 +1,198 @@ +/* +* linux/arch/arm/mach-at91/board-tms.c @@ -4656,9 +4622,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-tms.c linux-2.6/arch/arm/ + .init_irq = tms_init_irq, + .init_machine = tms_board_init, +MACHINE_END -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-tt9200.c linux-2.6/arch/arm/mach-at91/board-tt9200.c ---- linux-2.6.25/arch/arm/mach-at91/board-tt9200.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-tt9200.c 2008-04-25 21:15:43.000000000 +0200 +--- /dev/null ++++ b/arch/arm/mach-at91/board-tt9200.c @@ -0,0 +1,192 @@ +/* + * linux/arch/arm/mach-at91rm9200/board-tt9200.c @@ -4852,9 +4817,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-tt9200.c linux-2.6/arch/a + .init_irq = tt9200_init_irq, + .init_machine = tt9200_board_init, +MACHINE_END -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-usb-a9260.c linux-2.6/arch/arm/mach-at91/board-usb-a9260.c ---- linux-2.6.25/arch/arm/mach-at91/board-usb-a9260.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-usb-a9260.c 2008-04-25 21:15:43.000000000 +0200 +--- /dev/null ++++ b/arch/arm/mach-at91/board-usb-a9260.c @@ -0,0 +1,215 @@ +/* + * linux/arch/arm/mach-at91/board-usb-a9260.c @@ -5071,9 +5035,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-usb-a9260.c linux-2.6/arc + .init_irq = ek_init_irq, + .init_machine = ek_board_init, +MACHINE_END -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-usb-a9263.c linux-2.6/arch/arm/mach-at91/board-usb-a9263.c ---- linux-2.6.25/arch/arm/mach-at91/board-usb-a9263.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/board-usb-a9263.c 2008-04-25 21:15:43.000000000 +0200 +--- /dev/null ++++ b/arch/arm/mach-at91/board-usb-a9263.c @@ -0,0 +1,230 @@ +/* + * linux/arch/arm/mach-at91/board-usb-a9263.c @@ -5305,9 +5268,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/board-usb-a9263.c linux-2.6/arc + .init_irq = ek_init_irq, + .init_machine = ek_board_init, +MACHINE_END -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/clock.c linux-2.6/arch/arm/mach-at91/clock.c ---- linux-2.6.25/arch/arm/mach-at91/clock.c 2008-05-03 00:15:44.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/clock.c 2008-04-25 21:15:43.000000000 +0200 +--- a/arch/arm/mach-at91/clock.c ++++ b/arch/arm/mach-at91/clock.c @@ -32,6 +32,7 @@ #include @@ -5316,7 +5278,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/clock.c linux-2.6/arch/arm/mach /* -@@ -113,12 +114,34 @@ +@@ -113,12 +114,34 @@ static void pmc_sys_mode(struct clk *clk at91_sys_write(AT91_PMC_SCDR, clk->pmc_mask); } @@ -5351,7 +5313,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/clock.c linux-2.6/arch/arm/mach static struct clk uhpck = { .name = "uhpck", .parent = &pllb, -@@ -254,6 +277,23 @@ +@@ -254,6 +277,23 @@ EXPORT_SYMBOL(clk_get_rate); /*------------------------------------------------------------------------*/ @@ -5375,7 +5337,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/clock.c linux-2.6/arch/arm/mach #ifdef CONFIG_AT91_PROGRAMMABLE_CLOCKS /* -@@ -362,7 +402,7 @@ +@@ -362,7 +402,7 @@ static void __init init_programmable_clo static int at91_clk_show(struct seq_file *s, void *unused) { @@ -5384,7 +5346,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/clock.c linux-2.6/arch/arm/mach struct clk *clk; seq_printf(s, "SCSR = %8x\n", scsr = at91_sys_read(AT91_PMC_SCSR)); -@@ -370,7 +410,10 @@ +@@ -370,7 +410,10 @@ static int at91_clk_show(struct seq_file seq_printf(s, "MOR = %8x\n", at91_sys_read(AT91_CKGR_MOR)); seq_printf(s, "MCFR = %8x\n", at91_sys_read(AT91_CKGR_MCFR)); seq_printf(s, "PLLA = %8x\n", at91_sys_read(AT91_CKGR_PLLAR)); @@ -5396,7 +5358,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/clock.c linux-2.6/arch/arm/mach seq_printf(s, "MCKR = %8x\n", at91_sys_read(AT91_PMC_MCKR)); seq_printf(s, "SR = %8x\n", sr = at91_sys_read(AT91_PMC_SR)); -@@ -383,6 +426,8 @@ +@@ -383,6 +426,8 @@ static int at91_clk_show(struct seq_file state = (scsr & clk->pmc_mask) ? "on" : "off"; else if (clk->mode == pmc_periph_mode) state = (pcsr & clk->pmc_mask) ? "on" : "off"; @@ -5405,7 +5367,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/clock.c linux-2.6/arch/arm/mach else if (clk->pmc_mask) state = (sr & clk->pmc_mask) ? "on" : "off"; else if (clk == &clk32k || clk == &main_clk) -@@ -583,6 +628,17 @@ +@@ -583,6 +628,17 @@ int __init at91_clock_init(unsigned long uhpck.rate_hz = at91_usb_rate(&pllb, pllb.rate_hz, at91_pllb_usb_init); /* @@ -5423,7 +5385,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/clock.c linux-2.6/arch/arm/mach * MCK and CPU derive from one of those primary clocks. * For now, assume this parentage won't change. */ -@@ -599,6 +655,9 @@ +@@ -599,6 +655,9 @@ int __init at91_clock_init(unsigned long for (i = 0; i < ARRAY_SIZE(standard_pmc_clocks); i++) list_add_tail(&standard_pmc_clocks[i]->node, &clocks); @@ -5433,10 +5395,9 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/clock.c linux-2.6/arch/arm/mach /* MCK and CPU clock are "always on" */ clk_enable(&mck); -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/generic.h linux-2.6/arch/arm/mach-at91/generic.h ---- linux-2.6.25/arch/arm/mach-at91/generic.h 2008-05-03 00:15:44.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/generic.h 2008-04-25 21:15:43.000000000 +0200 -@@ -41,6 +41,7 @@ +--- a/arch/arm/mach-at91/generic.h ++++ b/arch/arm/mach-at91/generic.h +@@ -41,6 +41,7 @@ extern void __init at91_clock_associate( /* Power Management */ extern void at91_irq_suspend(void); extern void at91_irq_resume(void); @@ -5444,10 +5405,9 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/generic.h linux-2.6/arch/arm/ma /* GPIO */ #define AT91RM9200_PQFP 3 /* AT91RM9200 PQFP package has 3 banks */ -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/gpio.c linux-2.6/arch/arm/mach-at91/gpio.c ---- linux-2.6.25/arch/arm/mach-at91/gpio.c 2008-05-03 00:15:44.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/gpio.c 2008-04-25 21:15:43.000000000 +0200 -@@ -490,7 +490,8 @@ +--- a/arch/arm/mach-at91/gpio.c ++++ b/arch/arm/mach-at91/gpio.c +@@ -490,7 +490,8 @@ postcore_initcall(at91_gpio_debugfs_init /*--------------------------------------------------------------------------*/ @@ -5457,7 +5417,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/gpio.c linux-2.6/arch/arm/mach- * category than their parents, so it won't report false recursion. */ static struct lock_class_key gpio_lock_class; -@@ -557,6 +558,7 @@ +@@ -557,6 +558,7 @@ void __init at91_gpio_init(struct at91_g data->regbase = data->offset + (void __iomem *)AT91_VA_BASE_SYS; /* AT91SAM9263_ID_PIOCDE groups PIOC, PIOD, PIOE */ @@ -5465,9 +5425,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/gpio.c linux-2.6/arch/arm/mach- if (last && last->id == data->id) last->next = data; } -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/ics1523.c linux-2.6/arch/arm/mach-at91/ics1523.c ---- linux-2.6.25/arch/arm/mach-at91/ics1523.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/ics1523.c 2008-04-25 21:15:43.000000000 +0200 +--- /dev/null ++++ b/arch/arm/mach-at91/ics1523.c @@ -0,0 +1,208 @@ +/* + * arch/arm/mach-at91rm9200/ics1523.c @@ -5677,9 +5636,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/ics1523.c linux-2.6/arch/arm/ma + + return ack; +} -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/pm.c linux-2.6/arch/arm/mach-at91/pm.c ---- linux-2.6.25/arch/arm/mach-at91/pm.c 2008-05-03 00:15:44.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/pm.c 2008-04-25 21:15:43.000000000 +0200 +--- a/arch/arm/mach-at91/pm.c ++++ b/arch/arm/mach-at91/pm.c @@ -26,12 +26,144 @@ #include @@ -5826,7 +5784,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/pm.c linux-2.6/arch/arm/mach-at static int at91_pm_valid_state(suspend_state_t state) { -@@ -62,6 +194,7 @@ +@@ -62,6 +194,7 @@ static int at91_pm_begin(suspend_state_t * Verify that all the clocks are correct before entering * slow-clock mode. */ @@ -5834,7 +5792,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/pm.c linux-2.6/arch/arm/mach-at static int at91_pm_verify_clocks(void) { unsigned long scsr; -@@ -107,24 +240,24 @@ +@@ -107,24 +240,24 @@ static int at91_pm_verify_clocks(void) } /* @@ -5865,7 +5823,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/pm.c linux-2.6/arch/arm/mach-at static int at91_pm_enter(suspend_state_t state) { -@@ -158,11 +291,14 @@ +@@ -158,11 +291,14 @@ static int at91_pm_enter(suspend_state_t * turning off the main oscillator; reverse on wakeup. */ if (slow_clock) { @@ -5882,7 +5840,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/pm.c linux-2.6/arch/arm/mach-at /* FALLTHROUGH leaving master clock alone */ } -@@ -175,13 +311,15 @@ +@@ -175,13 +311,15 @@ static int at91_pm_enter(suspend_state_t case PM_SUSPEND_STANDBY: /* * NOTE: the Wait-for-Interrupt instruction needs to be @@ -5902,7 +5860,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/pm.c linux-2.6/arch/arm/mach-at case PM_SUSPEND_ON: asm("mcr p15, 0, r0, c7, c0, 4"); /* wait for interrupt */ -@@ -196,6 +334,7 @@ +@@ -196,6 +334,7 @@ static int at91_pm_enter(suspend_state_t at91_sys_read(AT91_AIC_IPR) & at91_sys_read(AT91_AIC_IMR)); error: @@ -5910,7 +5868,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/pm.c linux-2.6/arch/arm/mach-at target_state = PM_SUSPEND_ON; at91_irq_resume(); at91_gpio_resume(); -@@ -220,21 +359,20 @@ +@@ -220,21 +359,20 @@ static struct platform_suspend_ops at91_ static int __init at91_pm_init(void) { @@ -5940,9 +5898,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/pm.c linux-2.6/arch/arm/mach-at return 0; } arch_initcall(at91_pm_init); -diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/pm_slowclock.S linux-2.6/arch/arm/mach-at91/pm_slowclock.S ---- linux-2.6.25/arch/arm/mach-at91/pm_slowclock.S 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/mach-at91/pm_slowclock.S 2008-05-03 01:00:33.000000000 +0200 +--- /dev/null ++++ b/arch/arm/mach-at91/pm_slowclock.S @@ -0,0 +1,283 @@ +/* + * arch/arm/mach-at91/pm_slow_clock.S @@ -6227,10 +6184,9 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-at91/pm_slowclock.S linux-2.6/arch/a + +ENTRY(at91_slow_clock_sz) + .word .-at91_slow_clock -diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/Makefile linux-2.6/arch/arm/mach-ks8695/Makefile ---- linux-2.6.25/arch/arm/mach-ks8695/Makefile 2008-05-03 00:15:44.000000000 +0200 -+++ linux-2.6/arch/arm/mach-ks8695/Makefile 2007-12-31 15:04:45.000000000 +0200 -@@ -11,5 +11,8 @@ +--- a/arch/arm/mach-ks8695/Makefile ++++ b/arch/arm/mach-ks8695/Makefile +@@ -11,5 +11,8 @@ obj- := # PCI support is optional obj-$(CONFIG_PCI) += pci.o @@ -6239,10 +6195,9 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/Makefile linux-2.6/arch/arm/m + # Board-specific support obj-$(CONFIG_MACH_KS8695) += board-micrel.o -diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/devices.c linux-2.6/arch/arm/mach-ks8695/devices.c ---- linux-2.6.25/arch/arm/mach-ks8695/devices.c 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/arch/arm/mach-ks8695/devices.c 2007-12-31 10:43:55.000000000 +0200 -@@ -176,6 +176,27 @@ +--- a/arch/arm/mach-ks8695/devices.c ++++ b/arch/arm/mach-ks8695/devices.c +@@ -176,6 +176,27 @@ static void __init ks8695_add_device_wat #endif @@ -6270,10 +6225,9 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/devices.c linux-2.6/arch/arm/ /* -------------------------------------------------------------------- */ /* -diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/gpio.c linux-2.6/arch/arm/mach-ks8695/gpio.c ---- linux-2.6.25/arch/arm/mach-ks8695/gpio.c 2008-05-03 00:15:44.000000000 +0200 -+++ linux-2.6/arch/arm/mach-ks8695/gpio.c 2007-12-31 14:49:20.000000000 +0200 -@@ -136,9 +136,9 @@ +--- a/arch/arm/mach-ks8695/gpio.c ++++ b/arch/arm/mach-ks8695/gpio.c +@@ -136,9 +136,9 @@ int __init_or_module gpio_direction_outp /* set line state */ x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD); if (state) @@ -6285,7 +6239,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/gpio.c linux-2.6/arch/arm/mac __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD); /* set pin as output */ -@@ -168,9 +168,9 @@ +@@ -168,9 +168,9 @@ void gpio_set_value(unsigned int pin, un /* set output line state */ x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD); if (state) @@ -6297,7 +6251,7 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/gpio.c linux-2.6/arch/arm/mac __raw_writel(x, KS8695_GPIO_VA + KS8695_IOPD); local_irq_restore(flags); -@@ -189,7 +189,7 @@ +@@ -189,7 +189,7 @@ int gpio_get_value(unsigned int pin) return -EINVAL; x = __raw_readl(KS8695_GPIO_VA + KS8695_IOPD); @@ -6306,9 +6260,8 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/gpio.c linux-2.6/arch/arm/mac } EXPORT_SYMBOL(gpio_get_value); -diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/leds.c linux-2.6/arch/arm/mach-ks8695/leds.c ---- linux-2.6.25/arch/arm/mach-ks8695/leds.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/arch/arm/mach-ks8695/leds.c 2007-12-31 15:18:25.000000000 +0200 +--- /dev/null ++++ b/arch/arm/mach-ks8695/leds.c @@ -0,0 +1,94 @@ +/* + * LED driver for KS8695-based boards. @@ -6404,10 +6357,9 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/leds.c linux-2.6/arch/arm/mac +} + +__initcall(leds_init); -diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/pci.c linux-2.6/arch/arm/mach-ks8695/pci.c ---- linux-2.6.25/arch/arm/mach-ks8695/pci.c 2008-05-03 00:15:44.000000000 +0200 -+++ linux-2.6/arch/arm/mach-ks8695/pci.c 2008-05-08 22:03:41.000000000 +0200 -@@ -141,7 +141,7 @@ +--- a/arch/arm/mach-ks8695/pci.c ++++ b/arch/arm/mach-ks8695/pci.c +@@ -141,7 +141,7 @@ static struct pci_ops ks8695_pci_ops = { .write = ks8695_pci_writeconfig, }; @@ -6416,10 +6368,9 @@ diff -urN -x CVS linux-2.6.25/arch/arm/mach-ks8695/pci.c linux-2.6/arch/arm/mach { return pci_scan_bus(sys->busnr, &ks8695_pci_ops, sys); } -diff -urN -x CVS linux-2.6.25/drivers/char/Kconfig linux-2.6/drivers/char/Kconfig ---- linux-2.6.25/drivers/char/Kconfig 2008-05-03 00:15:47.000000000 +0200 -+++ linux-2.6/drivers/char/Kconfig 2008-03-09 15:14:46.000000000 +0200 -@@ -1056,5 +1056,21 @@ +--- a/drivers/char/Kconfig ++++ b/drivers/char/Kconfig +@@ -1056,5 +1056,21 @@ config DEVPORT source "drivers/s390/char/Kconfig" @@ -6441,10 +6392,9 @@ diff -urN -x CVS linux-2.6.25/drivers/char/Kconfig linux-2.6/drivers/char/Kconfi + endmenu -diff -urN -x CVS linux-2.6.25/drivers/char/Makefile linux-2.6/drivers/char/Makefile ---- linux-2.6.25/drivers/char/Makefile 2008-05-03 00:15:47.000000000 +0200 -+++ linux-2.6/drivers/char/Makefile 2008-03-09 15:14:46.000000000 +0200 -@@ -98,6 +98,8 @@ +--- a/drivers/char/Makefile ++++ b/drivers/char/Makefile +@@ -98,6 +98,8 @@ obj-$(CONFIG_GPIO_DEVICE) += gpio_dev.o obj-$(CONFIG_GPIO_VR41XX) += vr41xx_giu.o obj-$(CONFIG_GPIO_TB0219) += tb0219.o obj-$(CONFIG_TELCLOCK) += tlclk.o @@ -6453,9 +6403,8 @@ diff -urN -x CVS linux-2.6.25/drivers/char/Makefile linux-2.6/drivers/char/Makef obj-$(CONFIG_MWAVE) += mwave/ obj-$(CONFIG_AGP) += agp/ -diff -urN -x CVS linux-2.6.25/drivers/char/at91_spi.c linux-2.6/drivers/char/at91_spi.c ---- linux-2.6.25/drivers/char/at91_spi.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/drivers/char/at91_spi.c 2008-04-18 17:38:01.000000000 +0200 +--- /dev/null ++++ b/drivers/char/at91_spi.c @@ -0,0 +1,337 @@ +/* + * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 (Thunder) @@ -6794,9 +6743,8 @@ diff -urN -x CVS linux-2.6.25/drivers/char/at91_spi.c linux-2.6/drivers/char/at9 +MODULE_AUTHOR("Andrew Victor") +MODULE_DESCRIPTION("SPI driver for Atmel AT91RM9200") +MODULE_ALIAS("platform:at91_spi"); -diff -urN -x CVS linux-2.6.25/drivers/char/at91_spidev.c linux-2.6/drivers/char/at91_spidev.c ---- linux-2.6.25/drivers/char/at91_spidev.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/drivers/char/at91_spidev.c 2007-12-31 15:18:43.000000000 +0200 +--- /dev/null ++++ b/drivers/char/at91_spidev.c @@ -0,0 +1,233 @@ +/* + * User-space interface to the SPI bus on Atmel AT91RM9200 @@ -7031,10 +6979,9 @@ diff -urN -x CVS linux-2.6.25/drivers/char/at91_spidev.c linux-2.6/drivers/char/ +MODULE_LICENSE("GPL") +MODULE_AUTHOR("Andrew Victor") +MODULE_DESCRIPTION("SPI /dev interface for Atmel AT91RM9200") -diff -urN -x CVS linux-2.6.25/drivers/i2c/busses/Kconfig linux-2.6/drivers/i2c/busses/Kconfig ---- linux-2.6.25/drivers/i2c/busses/Kconfig 2008-05-03 00:15:47.000000000 +0200 -+++ linux-2.6/drivers/i2c/busses/Kconfig 2008-04-02 22:11:28.000000000 +0200 -@@ -88,6 +88,14 @@ +--- a/drivers/i2c/busses/Kconfig ++++ b/drivers/i2c/busses/Kconfig +@@ -88,6 +88,14 @@ config I2C_AT91 to support combined I2C messages. Use the i2c-gpio driver unless your system can cope with those limitations. @@ -7049,7 +6996,7 @@ diff -urN -x CVS linux-2.6.25/drivers/i2c/busses/Kconfig linux-2.6/drivers/i2c/b config I2C_AU1550 tristate "Au1550/Au1200 SMBus interface" depends on SOC_AU1550 || SOC_AU1200 -@@ -626,6 +634,14 @@ +@@ -626,6 +634,14 @@ config I2C_VOODOO3 This driver can also be built as a module. If so, the module will be called i2c-voodoo3. @@ -7064,10 +7011,9 @@ diff -urN -x CVS linux-2.6.25/drivers/i2c/busses/Kconfig linux-2.6/drivers/i2c/b config I2C_PCA_ISA tristate "PCA9564 on an ISA bus" depends on ISA -diff -urN -x CVS linux-2.6.25/drivers/i2c/busses/Makefile linux-2.6/drivers/i2c/busses/Makefile ---- linux-2.6.25/drivers/i2c/busses/Makefile 2008-05-03 00:15:47.000000000 +0200 -+++ linux-2.6/drivers/i2c/busses/Makefile 2008-03-09 15:14:46.000000000 +0200 -@@ -29,6 +29,7 @@ +--- a/drivers/i2c/busses/Makefile ++++ b/drivers/i2c/busses/Makefile +@@ -29,6 +29,7 @@ obj-$(CONFIG_I2C_OMAP) += i2c-omap.o obj-$(CONFIG_I2C_PARPORT) += i2c-parport.o obj-$(CONFIG_I2C_PARPORT_LIGHT) += i2c-parport-light.o obj-$(CONFIG_I2C_PASEMI) += i2c-pasemi.o @@ -7075,9 +7021,8 @@ diff -urN -x CVS linux-2.6.25/drivers/i2c/busses/Makefile linux-2.6/drivers/i2c/ obj-$(CONFIG_I2C_PCA_ISA) += i2c-pca-isa.o obj-$(CONFIG_I2C_PIIX4) += i2c-piix4.o obj-$(CONFIG_I2C_PMCMSP) += i2c-pmcmsp.o -diff -urN -x CVS linux-2.6.25/drivers/i2c/busses/i2c-at91.c linux-2.6/drivers/i2c/busses/i2c-at91.c ---- linux-2.6.25/drivers/i2c/busses/i2c-at91.c 2008-05-03 00:15:35.000000000 +0200 -+++ linux-2.6/drivers/i2c/busses/i2c-at91.c 2008-01-16 13:15:34.000000000 +0200 +--- a/drivers/i2c/busses/i2c-at91.c ++++ b/drivers/i2c/busses/i2c-at91.c @@ -31,8 +31,11 @@ #include #include @@ -7091,7 +7036,7 @@ diff -urN -x CVS linux-2.6.25/drivers/i2c/busses/i2c-at91.c linux-2.6/drivers/i2 static struct clk *twi_clk; static void __iomem *twi_base; -@@ -53,7 +56,7 @@ +@@ -53,7 +56,7 @@ static void __devinit at91_twi_hwinit(vo at91_twi_write(AT91_TWI_CR, AT91_TWI_MSEN); /* Set Master mode */ /* Calcuate clock dividers */ @@ -7100,7 +7045,7 @@ diff -urN -x CVS linux-2.6.25/drivers/i2c/busses/i2c-at91.c linux-2.6/drivers/i2 cdiv = cdiv + 1; /* round up */ ckdiv = 0; while (cdiv > 255) { -@@ -61,11 +64,12 @@ +@@ -61,11 +64,12 @@ static void __devinit at91_twi_hwinit(vo cdiv = cdiv >> 1; } @@ -7118,9 +7063,8 @@ diff -urN -x CVS linux-2.6.25/drivers/i2c/busses/i2c-at91.c linux-2.6/drivers/i2 } at91_twi_write(AT91_TWI_CWGR, (ckdiv << 16) | (cdiv << 8) | cdiv); -diff -urN -x CVS linux-2.6.25/drivers/i2c/busses/i2c-pca.c linux-2.6/drivers/i2c/busses/i2c-pca.c ---- linux-2.6.25/drivers/i2c/busses/i2c-pca.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/drivers/i2c/busses/i2c-pca.c 2007-12-31 15:18:43.000000000 +0200 +--- /dev/null ++++ b/drivers/i2c/busses/i2c-pca.c @@ -0,0 +1,213 @@ +/* + * Platform driver for PCA9564 I2C bus controller. @@ -7335,10 +7279,9 @@ diff -urN -x CVS linux-2.6.25/drivers/i2c/busses/i2c-pca.c linux-2.6/drivers/i2c +MODULE_AUTHOR("Andrew Victor"); +MODULE_DESCRIPTION("PCA9564 platform driver"); +MODULE_LICENSE("GPL"); -diff -urN -x CVS linux-2.6.25/drivers/mmc/host/at91_mci.c linux-2.6/drivers/mmc/host/at91_mci.c ---- linux-2.6.25/drivers/mmc/host/at91_mci.c 2008-05-03 00:15:48.000000000 +0200 -+++ linux-2.6/drivers/mmc/host/at91_mci.c 2008-04-18 17:32:40.000000000 +0200 -@@ -659,13 +659,14 @@ +--- a/drivers/mmc/host/at91_mci.c ++++ b/drivers/mmc/host/at91_mci.c +@@ -659,13 +659,14 @@ static void at91_mci_set_ios(struct mmc_ /* maybe switch power to the card */ if (host->board->vcc_pin) { switch (ios->power_mode) { @@ -7360,10 +7303,9 @@ diff -urN -x CVS linux-2.6.25/drivers/mmc/host/at91_mci.c linux-2.6/drivers/mmc/ } } } -diff -urN -x CVS linux-2.6.25/drivers/mtd/devices/Kconfig linux-2.6/drivers/mtd/devices/Kconfig ---- linux-2.6.25/drivers/mtd/devices/Kconfig 2008-05-03 00:15:36.000000000 +0200 -+++ linux-2.6/drivers/mtd/devices/Kconfig 2007-12-31 10:44:25.000000000 +0200 -@@ -270,5 +270,17 @@ +--- a/drivers/mtd/devices/Kconfig ++++ b/drivers/mtd/devices/Kconfig +@@ -270,5 +270,17 @@ config MTD_DOCPROBE_55AA LinuxBIOS or if you need to recover a DiskOnChip Millennium on which you have managed to wipe the first block. @@ -7382,17 +7324,15 @@ diff -urN -x CVS linux-2.6.25/drivers/mtd/devices/Kconfig linux-2.6/drivers/mtd/ + Always add the whole DataFlash device when using MTD partitions. +endmenu -diff -urN -x CVS linux-2.6.25/drivers/mtd/devices/Makefile linux-2.6/drivers/mtd/devices/Makefile ---- linux-2.6.25/drivers/mtd/devices/Makefile 2008-05-03 00:15:36.000000000 +0200 -+++ linux-2.6/drivers/mtd/devices/Makefile 2007-12-31 10:48:27.000000000 +0200 -@@ -17,3 +17,4 @@ +--- a/drivers/mtd/devices/Makefile ++++ b/drivers/mtd/devices/Makefile +@@ -17,3 +17,4 @@ obj-$(CONFIG_MTD_LART) += lart.o obj-$(CONFIG_MTD_BLOCK2MTD) += block2mtd.o obj-$(CONFIG_MTD_DATAFLASH) += mtd_dataflash.o obj-$(CONFIG_MTD_M25P80) += m25p80.o +obj-$(CONFIG_MTD_AT91_DATAFLASH)+= at91_dataflash.o -diff -urN -x CVS linux-2.6.25/drivers/mtd/devices/at91_dataflash.c linux-2.6/drivers/mtd/devices/at91_dataflash.c ---- linux-2.6.25/drivers/mtd/devices/at91_dataflash.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/drivers/mtd/devices/at91_dataflash.c 2007-12-31 15:18:43.000000000 +0200 +--- /dev/null ++++ b/drivers/mtd/devices/at91_dataflash.c @@ -0,0 +1,673 @@ +/* + * Atmel DataFlash driver for Atmel AT91RM9200 (Thunder) @@ -8067,10 +8007,9 @@ diff -urN -x CVS linux-2.6.25/drivers/mtd/devices/at91_dataflash.c linux-2.6/dri +MODULE_LICENSE("GPL"); +MODULE_AUTHOR("Andrew Victor"); +MODULE_DESCRIPTION("DataFlash driver for Atmel AT91RM9200"); -diff -urN -x CVS linux-2.6.25/drivers/mtd/nand/Kconfig linux-2.6/drivers/mtd/nand/Kconfig ---- linux-2.6.25/drivers/mtd/nand/Kconfig 2008-05-03 00:15:48.000000000 +0200 -+++ linux-2.6/drivers/mtd/nand/Kconfig 2008-04-18 17:52:53.000000000 +0200 -@@ -273,12 +273,53 @@ +--- a/drivers/mtd/nand/Kconfig ++++ b/drivers/mtd/nand/Kconfig +@@ -273,12 +273,53 @@ config MTD_NAND_CS553X If you say "m", the module will be called "cs553x_nand.ko". config MTD_NAND_AT91 @@ -8125,9 +8064,8 @@ diff -urN -x CVS linux-2.6.25/drivers/mtd/nand/Kconfig linux-2.6/drivers/mtd/nan config MTD_NAND_CM_X270 tristate "Support for NAND Flash on CM-X270 modules" depends on MTD_NAND && MACH_ARMCORE -diff -urN -x CVS linux-2.6.25/drivers/mtd/nand/at91_nand.c linux-2.6/drivers/mtd/nand/at91_nand.c ---- linux-2.6.25/drivers/mtd/nand/at91_nand.c 2008-05-03 00:15:48.000000000 +0200 -+++ linux-2.6/drivers/mtd/nand/at91_nand.c 2008-05-03 00:53:39.000000000 +0200 +--- a/drivers/mtd/nand/at91_nand.c ++++ b/drivers/mtd/nand/at91_nand.c @@ -9,6 +9,15 @@ * Derived from drivers/mtd/spia.c * Copyright (C) 2000 Steven J. Hill (sjhill@cotw.com) @@ -8220,7 +8158,7 @@ diff -urN -x CVS linux-2.6.25/drivers/mtd/nand/at91_nand.c linux-2.6/drivers/mtd * Hardware specific access to control-lines */ static void at91_nand_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl) -@@ -44,6 +113,13 @@ +@@ -44,6 +113,13 @@ static void at91_nand_cmd_ctrl(struct mt struct nand_chip *nand_chip = mtd->priv; struct at91_nand_host *host = nand_chip->priv; @@ -8234,7 +8172,7 @@ diff -urN -x CVS linux-2.6.25/drivers/mtd/nand/at91_nand.c linux-2.6/drivers/mtd if (cmd == NAND_CMD_NONE) return; -@@ -65,27 +141,249 @@ +@@ -65,27 +141,249 @@ static int at91_nand_device_ready(struct } /* @@ -8493,7 +8431,7 @@ diff -urN -x CVS linux-2.6.25/drivers/mtd/nand/at91_nand.c linux-2.6/drivers/mtd /* * Probe for the NAND device. */ -@@ -94,6 +392,8 @@ +@@ -94,6 +392,8 @@ static int __init at91_nand_probe(struct struct at91_nand_host *host; struct mtd_info *mtd; struct nand_chip *nand_chip; @@ -8502,7 +8440,7 @@ diff -urN -x CVS linux-2.6.25/drivers/mtd/nand/at91_nand.c linux-2.6/drivers/mtd int res; #ifdef CONFIG_MTD_PARTITIONS -@@ -108,8 +408,13 @@ +@@ -108,8 +408,13 @@ static int __init at91_nand_probe(struct return -ENOMEM; } @@ -8518,7 +8456,7 @@ diff -urN -x CVS linux-2.6.25/drivers/mtd/nand/at91_nand.c linux-2.6/drivers/mtd if (host->io_base == NULL) { printk(KERN_ERR "at91_nand: ioremap failed\n"); kfree(host); -@@ -119,6 +424,7 @@ +@@ -119,6 +424,7 @@ static int __init at91_nand_probe(struct mtd = &host->mtd; nand_chip = &host->nand_chip; host->board = pdev->dev.platform_data; @@ -8526,7 +8464,7 @@ diff -urN -x CVS linux-2.6.25/drivers/mtd/nand/at91_nand.c linux-2.6/drivers/mtd nand_chip->priv = host; /* link the private data structures */ mtd->priv = nand_chip; -@@ -132,11 +438,40 @@ +@@ -132,11 +438,40 @@ static int __init at91_nand_probe(struct if (host->board->rdy_pin) nand_chip->dev_ready = at91_nand_device_ready; @@ -8568,7 +8506,7 @@ diff -urN -x CVS linux-2.6.25/drivers/mtd/nand/at91_nand.c linux-2.6/drivers/mtd platform_set_drvdata(pdev, host); at91_nand_enable(host); -@@ -149,8 +484,60 @@ +@@ -149,8 +484,60 @@ static int __init at91_nand_probe(struct } } @@ -8631,7 +8569,7 @@ diff -urN -x CVS linux-2.6.25/drivers/mtd/nand/at91_nand.c linux-2.6/drivers/mtd res = -ENXIO; goto out; } -@@ -179,8 +566,11 @@ +@@ -179,8 +566,11 @@ static int __init at91_nand_probe(struct if (!res) return res; @@ -8643,7 +8581,7 @@ diff -urN -x CVS linux-2.6.25/drivers/mtd/nand/at91_nand.c linux-2.6/drivers/mtd out: at91_nand_disable(host); platform_set_drvdata(pdev, NULL); -@@ -192,7 +582,7 @@ +@@ -192,7 +582,7 @@ out: /* * Remove a NAND device. */ @@ -8652,7 +8590,7 @@ diff -urN -x CVS linux-2.6.25/drivers/mtd/nand/at91_nand.c linux-2.6/drivers/mtd { struct at91_nand_host *host = platform_get_drvdata(pdev); struct mtd_info *mtd = &host->mtd; -@@ -208,8 +598,7 @@ +@@ -208,8 +598,7 @@ static int __devexit at91_nand_remove(st } static struct platform_driver at91_nand_driver = { @@ -8662,7 +8600,7 @@ diff -urN -x CVS linux-2.6.25/drivers/mtd/nand/at91_nand.c linux-2.6/drivers/mtd .driver = { .name = "at91_nand", .owner = THIS_MODULE, -@@ -218,7 +607,7 @@ +@@ -218,7 +607,7 @@ static struct platform_driver at91_nand_ static int __init at91_nand_init(void) { @@ -8671,16 +8609,15 @@ diff -urN -x CVS linux-2.6.25/drivers/mtd/nand/at91_nand.c linux-2.6/drivers/mtd } -@@ -233,4 +622,4 @@ +@@ -233,4 +622,4 @@ module_exit(at91_nand_exit); MODULE_LICENSE("GPL"); MODULE_AUTHOR("Rick Bronson"); -MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200"); +MODULE_DESCRIPTION("NAND/SmartMedia driver for AT91RM9200 / AT91SAM9 / AT91CAP9"); -diff -urN -x CVS linux-2.6.25/drivers/net/arm/Kconfig linux-2.6/drivers/net/arm/Kconfig ---- linux-2.6.25/drivers/net/arm/Kconfig 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/drivers/net/arm/Kconfig 2008-03-04 21:52:40.000000000 +0200 -@@ -47,3 +47,10 @@ +--- a/drivers/net/arm/Kconfig ++++ b/drivers/net/arm/Kconfig +@@ -47,3 +47,10 @@ config EP93XX_ETH help This is a driver for the ethernet hardware included in EP93xx CPUs. Say Y if you are building a kernel for EP93xx based devices. @@ -8691,18 +8628,16 @@ diff -urN -x CVS linux-2.6.25/drivers/net/arm/Kconfig linux-2.6/drivers/net/arm/ + help + If you wish to compile a kernel for an KS8695-based board + and enable Ethernet support, then select this option. -diff -urN -x CVS linux-2.6.25/drivers/net/arm/Makefile linux-2.6/drivers/net/arm/Makefile ---- linux-2.6.25/drivers/net/arm/Makefile 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/drivers/net/arm/Makefile 2008-03-04 21:51:41.000000000 +0200 -@@ -9,3 +9,4 @@ +--- a/drivers/net/arm/Makefile ++++ b/drivers/net/arm/Makefile +@@ -9,3 +9,4 @@ obj-$(CONFIG_ARM_ETHER3) += ether3.o obj-$(CONFIG_ARM_ETHER1) += ether1.o obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o +obj-$(CONFIG_ARM_KS8695_ETHER) += ks8695_ether.o -diff -urN -x CVS linux-2.6.25/drivers/net/arm/at91_ether.c linux-2.6/drivers/net/arm/at91_ether.c ---- linux-2.6.25/drivers/net/arm/at91_ether.c 2008-05-03 00:15:48.000000000 +0200 -+++ linux-2.6/drivers/net/arm/at91_ether.c 2008-05-08 21:47:22.000000000 +0200 -@@ -220,7 +220,7 @@ +--- a/drivers/net/arm/at91_ether.c ++++ b/drivers/net/arm/at91_ether.c +@@ -220,7 +220,7 @@ static irqreturn_t at91ether_phy_interru if (!(phy & (1 << 0))) goto done; } @@ -8711,7 +8646,7 @@ diff -urN -x CVS linux-2.6.25/drivers/net/arm/at91_ether.c linux-2.6/drivers/net read_phy(lp->phy_address, MII_TPISTATUS, &phy); /* ack interrupt in Micrel PHY */ if (!(phy & ((1 << 2) | 1))) goto done; -@@ -286,7 +286,7 @@ +@@ -286,7 +286,7 @@ static void enable_phyirq(struct net_dev dsintr = (1 << 15) | ( 1 << 14); write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr); } @@ -8720,7 +8655,7 @@ diff -urN -x CVS linux-2.6.25/drivers/net/arm/at91_ether.c linux-2.6/drivers/net dsintr = (1 << 10) | ( 1 << 8); write_phy(lp->phy_address, MII_TPISTATUS, dsintr); } -@@ -341,7 +341,7 @@ +@@ -341,7 +341,7 @@ static void disable_phyirq(struct net_de dsintr = ~(1 << 14); write_phy(lp->phy_address, MII_BCMINTR_REG, dsintr); } @@ -8729,7 +8664,7 @@ diff -urN -x CVS linux-2.6.25/drivers/net/arm/at91_ether.c linux-2.6/drivers/net read_phy(lp->phy_address, MII_TPISTATUS, &dsintr); dsintr = ~((1 << 10) | (1 << 8)); write_phy(lp->phy_address, MII_TPISTATUS, dsintr); -@@ -820,7 +820,7 @@ +@@ -820,7 +820,7 @@ static int at91ether_tx(struct sk_buff * lp->skb = skb; lp->skb_length = skb->len; lp->skb_physaddr = dma_map_single(NULL, skb->data, skb->len, DMA_TO_DEVICE); @@ -8738,7 +8673,7 @@ diff -urN -x CVS linux-2.6.25/drivers/net/arm/at91_ether.c linux-2.6/drivers/net /* Set address of the data in the Transmit Address register */ at91_emac_write(AT91_EMAC_TAR, lp->skb_physaddr); -@@ -843,34 +843,32 @@ +@@ -843,34 +843,32 @@ static int at91ether_tx(struct sk_buff * */ static struct net_device_stats *at91ether_stats(struct net_device *dev) { @@ -8788,7 +8723,7 @@ diff -urN -x CVS linux-2.6.25/drivers/net/arm/at91_ether.c linux-2.6/drivers/net } /* -@@ -896,16 +894,16 @@ +@@ -896,16 +894,16 @@ static void at91ether_rx(struct net_devi skb->protocol = eth_type_trans(skb, dev); dev->last_rx = jiffies; @@ -8808,7 +8743,7 @@ diff -urN -x CVS linux-2.6.25/drivers/net/arm/at91_ether.c linux-2.6/drivers/net dlist->descriptors[lp->rxBuffIndex].addr &= ~EMAC_DESC_DONE; /* reset ownership bit */ if (lp->rxBuffIndex == MAX_RX_DESCR-1) /* wrap after last buffer */ -@@ -934,7 +932,7 @@ +@@ -934,7 +932,7 @@ static irqreturn_t at91ether_interrupt(i if (intstatus & AT91_EMAC_TCOM) { /* Transmit complete */ /* The TCOM bit is set even if the transmission failed. */ if (intstatus & (AT91_EMAC_TUND | AT91_EMAC_RTRY)) @@ -8817,7 +8752,7 @@ diff -urN -x CVS linux-2.6.25/drivers/net/arm/at91_ether.c linux-2.6/drivers/net if (lp->skb) { dev_kfree_skb_irq(lp->skb); -@@ -978,15 +976,22 @@ +@@ -978,15 +976,22 @@ static int __init at91ether_setup(unsign struct net_device *dev; struct at91_private *lp; unsigned int val; @@ -8843,7 +8778,7 @@ diff -urN -x CVS linux-2.6.25/drivers/net/arm/at91_ether.c linux-2.6/drivers/net /* Install the interrupt handler */ if (request_irq(dev->irq, at91ether_interrupt, 0, dev->name, dev)) { -@@ -1043,7 +1048,9 @@ +@@ -1043,7 +1048,9 @@ static int __init at91ether_setup(unsign } else if (machine_is_csb337()) { /* mix link activity status into LED2 link state */ write_phy(phy_address, MII_LEDCTRL_REG, 0x0d22); @@ -8854,7 +8789,7 @@ diff -urN -x CVS linux-2.6.25/drivers/net/arm/at91_ether.c linux-2.6/drivers/net disable_mdi(); spin_unlock_irq(&lp->lock); -@@ -1058,12 +1065,12 @@ +@@ -1058,12 +1065,12 @@ static int __init at91ether_setup(unsign lp->phy_address = phy_address; /* MDI address of PHY */ /* Register the network interface */ @@ -8870,7 +8805,7 @@ diff -urN -x CVS linux-2.6.25/drivers/net/arm/at91_ether.c linux-2.6/drivers/net } /* Determine current link speed */ -@@ -1101,6 +1108,8 @@ +@@ -1101,6 +1108,8 @@ static int __init at91ether_setup(unsign printk(KERN_INFO "%s: National Semiconductor DP83848 PHY\n", dev->name); else if (phy_type == MII_AC101L_ID) printk(KERN_INFO "%s: Altima AC101L PHY\n", dev->name); @@ -8879,7 +8814,7 @@ diff -urN -x CVS linux-2.6.25/drivers/net/arm/at91_ether.c linux-2.6/drivers/net else if (phy_type == MII_KS8721_ID) printk(KERN_INFO "%s: Micrel KS8721 PHY\n", dev->name); else if (phy_type == MII_T78Q21x3_ID) -@@ -1146,6 +1155,7 @@ +@@ -1146,6 +1155,7 @@ static int __init at91ether_probe(struct case MII_DP83847_ID: /* National Semiconductor DP83847: */ case MII_DP83848_ID: /* National Semiconductor DP83848: */ case MII_AC101L_ID: /* Altima AC101L: PHY_ID1 = 0x22, PHY_ID2 = 0x5520 */ @@ -8887,14 +8822,13 @@ diff -urN -x CVS linux-2.6.25/drivers/net/arm/at91_ether.c linux-2.6/drivers/net case MII_KS8721_ID: /* Micrel KS8721: PHY_ID1 = 0x22, PHY_ID2 = 0x1610 */ case MII_T78Q21x3_ID: /* Teridian 78Q21x3: PHY_ID1 = 0x0E, PHY_ID2 = 7237 */ case MII_LAN83C185_ID: /* SMSC LAN83C185: PHY_ID1 = 0x0007, PHY_ID2 = 0xC0A1 */ -@@ -1246,3 +1256,4 @@ +@@ -1246,3 +1256,4 @@ module_exit(at91ether_exit) MODULE_LICENSE("GPL"); MODULE_DESCRIPTION("AT91RM9200 EMAC Ethernet driver"); MODULE_AUTHOR("Andrew Victor"); +MODULE_ALIAS("platform:" DRV_NAME); -diff -urN -x CVS linux-2.6.25/drivers/net/arm/at91_ether.h linux-2.6/drivers/net/arm/at91_ether.h ---- linux-2.6.25/drivers/net/arm/at91_ether.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/drivers/net/arm/at91_ether.h 2008-05-08 21:47:31.000000000 +0200 +--- a/drivers/net/arm/at91_ether.h ++++ b/drivers/net/arm/at91_ether.h @@ -48,6 +48,9 @@ /* Altima AC101L PHY */ #define MII_AC101L_ID 0x00225520 @@ -8905,7 +8839,7 @@ diff -urN -x CVS linux-2.6.25/drivers/net/arm/at91_ether.h linux-2.6/drivers/net /* Micrel KS8721 PHY */ #define MII_KS8721_ID 0x00221610 -@@ -84,7 +87,6 @@ +@@ -84,7 +87,6 @@ struct recv_desc_bufs struct at91_private { @@ -8913,9 +8847,8 @@ diff -urN -x CVS linux-2.6.25/drivers/net/arm/at91_ether.h linux-2.6/drivers/net struct mii_if_info mii; /* ethtool support */ struct at91_eth_data board_data; /* board-specific configuration */ struct clk *ether_clk; /* clock */ -diff -urN -x CVS linux-2.6.25/drivers/net/arm/ks8695_ether.c linux-2.6/drivers/net/arm/ks8695_ether.c ---- linux-2.6.25/drivers/net/arm/ks8695_ether.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/drivers/net/arm/ks8695_ether.c 2008-05-08 21:52:35.000000000 +0200 +--- /dev/null ++++ b/drivers/net/arm/ks8695_ether.c @@ -0,0 +1,1009 @@ +/* + * Ethernet driver for the Kendin/Micrel KS8695. @@ -9926,9 +9859,8 @@ diff -urN -x CVS linux-2.6.25/drivers/net/arm/ks8695_ether.c linux-2.6/drivers/n +MODULE_DESCRIPTION("KS8695 Ethernet driver"); +MODULE_AUTHOR("Andrew Victor"); +MODULE_ALIAS("platform:" DRV_NAME); -diff -urN -x CVS linux-2.6.25/drivers/net/arm/ks8695_ether.h linux-2.6/drivers/net/arm/ks8695_ether.h ---- linux-2.6.25/drivers/net/arm/ks8695_ether.h 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/drivers/net/arm/ks8695_ether.h 2008-05-08 21:51:23.000000000 +0200 +--- /dev/null ++++ b/drivers/net/arm/ks8695_ether.h @@ -0,0 +1,92 @@ +/* + * Ethernet driver for the Micrel/Kendin KS8695 (Centaur) @@ -10022,10 +9954,9 @@ diff -urN -x CVS linux-2.6.25/drivers/net/arm/ks8695_ether.h linux-2.6/drivers/n +}; + +#endif -diff -urN -x CVS linux-2.6.25/drivers/rtc/Kconfig linux-2.6/drivers/rtc/Kconfig ---- linux-2.6.25/drivers/rtc/Kconfig 2008-05-03 00:15:49.000000000 +0200 -+++ linux-2.6/drivers/rtc/Kconfig 2008-04-15 21:48:11.000000000 +0200 -@@ -487,12 +487,12 @@ +--- a/drivers/rtc/Kconfig ++++ b/drivers/rtc/Kconfig +@@ -487,12 +487,12 @@ config RTC_DRV_AT91RM9200 this is powered by the backup power supply. config RTC_DRV_AT91SAM9 @@ -10042,9 +9973,8 @@ diff -urN -x CVS linux-2.6.25/drivers/rtc/Kconfig linux-2.6/drivers/rtc/Kconfig (On AT91SAM9rl chips you probably want to use the dedicated RTC module and leave the RTT available for other uses.) -diff -urN -x CVS linux-2.6.25/drivers/rtc/rtc-at91rm9200.c linux-2.6/drivers/rtc/rtc-at91rm9200.c ---- linux-2.6.25/drivers/rtc/rtc-at91rm9200.c 2008-05-03 00:15:49.000000000 +0200 -+++ linux-2.6/drivers/rtc/rtc-at91rm9200.c 2008-04-25 23:15:05.000000000 +0200 +--- a/drivers/rtc/rtc-at91rm9200.c ++++ b/drivers/rtc/rtc-at91rm9200.c @@ -29,9 +29,6 @@ #include @@ -10055,7 +9985,7 @@ diff -urN -x CVS linux-2.6.25/drivers/rtc/rtc-at91rm9200.c linux-2.6/drivers/rtc #include -@@ -307,12 +304,6 @@ +@@ -307,12 +304,6 @@ static int __init at91_rtc_probe(struct return ret; } @@ -10068,9 +9998,8 @@ diff -urN -x CVS linux-2.6.25/drivers/rtc/rtc-at91rm9200.c linux-2.6/drivers/rtc rtc = rtc_device_register(pdev->name, &pdev->dev, &at91_rtc_ops, THIS_MODULE); if (IS_ERR(rtc)) { -diff -urN -x CVS linux-2.6.25/drivers/rtc/rtc-at91sam9.c linux-2.6/drivers/rtc/rtc-at91sam9.c ---- linux-2.6.25/drivers/rtc/rtc-at91sam9.c 2008-05-03 00:15:49.000000000 +0200 -+++ linux-2.6/drivers/rtc/rtc-at91sam9.c 2008-05-05 22:01:39.000000000 +0200 +--- a/drivers/rtc/rtc-at91sam9.c ++++ b/drivers/rtc/rtc-at91sam9.c @@ -21,6 +21,7 @@ #include @@ -10079,7 +10008,7 @@ diff -urN -x CVS linux-2.6.25/drivers/rtc/rtc-at91sam9.c linux-2.6/drivers/rtc/r #include -@@ -150,6 +151,9 @@ +@@ -150,6 +151,9 @@ static int at91_rtc_settime(struct devic return 0; } @@ -10089,7 +10018,7 @@ diff -urN -x CVS linux-2.6.25/drivers/rtc/rtc-at91sam9.c linux-2.6/drivers/rtc/r static int at91_rtc_readalarm(struct device *dev, struct rtc_wkalrm *alrm) { struct sam9_rtc *rtc = dev_get_drvdata(dev); -@@ -176,6 +180,9 @@ +@@ -176,6 +180,9 @@ static int at91_rtc_readalarm(struct dev return 0; } @@ -10099,7 +10028,7 @@ diff -urN -x CVS linux-2.6.25/drivers/rtc/rtc-at91sam9.c linux-2.6/drivers/rtc/r static int at91_rtc_setalarm(struct device *dev, struct rtc_wkalrm *alrm) { struct sam9_rtc *rtc = dev_get_drvdata(dev); -@@ -321,10 +328,6 @@ +@@ -321,10 +328,6 @@ static int __init at91_rtc_probe(struct if (!rtc) return -ENOMEM; @@ -10110,12 +10039,11 @@ diff -urN -x CVS linux-2.6.25/drivers/rtc/rtc-at91sam9.c linux-2.6/drivers/rtc/r platform_set_drvdata(pdev, rtc); rtc->rtt = (void __force __iomem *) (AT91_VA_BASE_SYS - AT91_BASE_SYS); rtc->rtt += r->start; -diff -urN -x CVS linux-2.6.25/drivers/spi/Kconfig linux-2.6/drivers/spi/Kconfig ---- linux-2.6.25/drivers/spi/Kconfig 2008-05-03 00:15:50.000000000 +0200 -+++ linux-2.6/drivers/spi/Kconfig 2008-03-09 15:14:53.000000000 +0200 -@@ -105,6 +105,15 @@ - inexpensive battery powered microcontroller evaluation board. - This same cable can be used to flash new firmware. +--- a/drivers/spi/Kconfig ++++ b/drivers/spi/Kconfig +@@ -113,6 +113,15 @@ config SPI_GPIO + + If unsure, say N. +config SPI_AT91 + tristate "AT91RM9200 Bitbang SPI Master" @@ -10129,10 +10057,9 @@ diff -urN -x CVS linux-2.6.25/drivers/spi/Kconfig linux-2.6/drivers/spi/Kconfig config SPI_IMX tristate "Freescale iMX SPI controller" depends on SPI_MASTER && ARCH_IMX && EXPERIMENTAL -diff -urN -x CVS linux-2.6.25/drivers/spi/Makefile linux-2.6/drivers/spi/Makefile ---- linux-2.6.25/drivers/spi/Makefile 2008-05-03 00:15:50.000000000 +0200 -+++ linux-2.6/drivers/spi/Makefile 2008-03-09 17:54:27.000000000 +0200 -@@ -29,6 +29,7 @@ +--- a/drivers/spi/Makefile ++++ b/drivers/spi/Makefile +@@ -29,6 +29,7 @@ obj-$(CONFIG_SPI_S3C24XX) += spi_s3c24x obj-$(CONFIG_SPI_TXX9) += spi_txx9.o obj-$(CONFIG_SPI_XILINX) += xilinx_spi.o obj-$(CONFIG_SPI_SH_SCI) += spi_sh_sci.o @@ -10140,9 +10067,8 @@ diff -urN -x CVS linux-2.6.25/drivers/spi/Makefile linux-2.6/drivers/spi/Makefil # ... add above this line ... # SPI protocol drivers (device/link on bus) -diff -urN -x CVS linux-2.6.25/drivers/spi/spi_at91_bitbang.c linux-2.6/drivers/spi/spi_at91_bitbang.c ---- linux-2.6.25/drivers/spi/spi_at91_bitbang.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/drivers/spi/spi_at91_bitbang.c 2008-04-18 17:38:19.000000000 +0200 +--- /dev/null ++++ b/drivers/spi/spi_at91_bitbang.c @@ -0,0 +1,208 @@ +/* + * at91_spi.c - at91 SPI driver (BOOTSTRAP/BITBANG VERSION) @@ -10352,10 +10278,9 @@ diff -urN -x CVS linux-2.6.25/drivers/spi/spi_at91_bitbang.c linux-2.6/drivers/s +MODULE_AUTHOR("David Brownell"); +MODULE_LICENSE("GPL"); +MODULE_ALIAS("platform:at91_spi"); -diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/Kconfig linux-2.6/drivers/usb/gadget/Kconfig ---- linux-2.6.25/drivers/usb/gadget/Kconfig 2008-05-03 00:15:50.000000000 +0200 -+++ linux-2.6/drivers/usb/gadget/Kconfig 2008-04-18 19:23:34.000000000 +0200 -@@ -118,10 +118,10 @@ +--- a/drivers/usb/gadget/Kconfig ++++ b/drivers/usb/gadget/Kconfig +@@ -118,10 +118,10 @@ config USB_AMD5536UDC config USB_GADGET_ATMEL_USBA boolean "Atmel USBA" select USB_GADGET_DUALSPEED @@ -10368,10 +10293,9 @@ diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/Kconfig linux-2.6/drivers/usb/g config USB_ATMEL_USBA tristate -diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/at91_udc.c linux-2.6/drivers/usb/gadget/at91_udc.c ---- linux-2.6.25/drivers/usb/gadget/at91_udc.c 2008-05-03 00:15:50.000000000 +0200 -+++ linux-2.6/drivers/usb/gadget/at91_udc.c 2008-04-15 21:48:12.000000000 +0200 -@@ -1827,7 +1827,7 @@ +--- a/drivers/usb/gadget/at91_udc.c ++++ b/drivers/usb/gadget/at91_udc.c +@@ -1827,7 +1827,7 @@ static int at91udc_suspend(struct platfo */ if ((!udc->suspended && udc->addr) || !wake @@ -10380,9 +10304,8 @@ diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/at91_udc.c linux-2.6/drivers/us pullup(udc, 0); wake = 0; } else -diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/atmel_usba_udc.c linux-2.6/drivers/usb/gadget/atmel_usba_udc.c ---- linux-2.6.25/drivers/usb/gadget/atmel_usba_udc.c 2008-05-03 00:15:50.000000000 +0200 -+++ linux-2.6/drivers/usb/gadget/atmel_usba_udc.c 2008-05-03 01:07:46.000000000 +0200 +--- a/drivers/usb/gadget/atmel_usba_udc.c ++++ b/drivers/usb/gadget/atmel_usba_udc.c @@ -18,6 +18,7 @@ #include #include @@ -10399,7 +10322,7 @@ diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/atmel_usba_udc.c linux-2.6/driv #ifdef CONFIG_USB_GADGET_DEBUG_FS #include -@@ -324,53 +326,6 @@ +@@ -324,53 +326,6 @@ static int vbus_is_present(struct usba_u return 1; } @@ -10453,7 +10376,7 @@ diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/atmel_usba_udc.c linux-2.6/driv static void next_fifo_transaction(struct usba_ep *ep, struct usba_request *req) { unsigned int transaction_len; -@@ -387,7 +342,7 @@ +@@ -387,7 +342,7 @@ static void next_fifo_transaction(struct ep->ep.name, req, transaction_len, req->last_transaction ? ", done" : ""); @@ -10462,7 +10385,7 @@ diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/atmel_usba_udc.c linux-2.6/driv usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); req->req.actual += transaction_len; } -@@ -476,7 +431,7 @@ +@@ -476,7 +431,7 @@ static void receive_data(struct usba_ep bytecount = req->req.length - req->req.actual; } @@ -10471,7 +10394,7 @@ diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/atmel_usba_udc.c linux-2.6/driv ep->fifo, bytecount); req->req.actual += bytecount; -@@ -1029,33 +984,6 @@ +@@ -1029,33 +984,6 @@ static const struct usb_gadget_ops usba_ .set_selfpowered = usba_udc_set_selfpowered, }; @@ -10505,7 +10428,7 @@ diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/atmel_usba_udc.c linux-2.6/driv static struct usb_endpoint_descriptor usba_ep0_desc = { .bLength = USB_DT_ENDPOINT_SIZE, .bDescriptorType = USB_DT_ENDPOINT, -@@ -1074,7 +1002,6 @@ +@@ -1074,7 +1002,6 @@ static void nop_release(struct device *d static struct usba_udc the_udc = { .gadget = { .ops = &usba_udc_ops, @@ -10513,7 +10436,7 @@ diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/atmel_usba_udc.c linux-2.6/driv .ep_list = LIST_HEAD_INIT(the_udc.gadget.ep_list), .is_dualspeed = 1, .name = "atmel_usba_udc", -@@ -1231,7 +1158,7 @@ +@@ -1231,7 +1158,7 @@ static int do_test_mode(struct usba_udc } else { usba_ep_writel(ep, CTL_ENB, USBA_EPT_ENABLE); usba_writel(udc, TST, USBA_TST_PKT_MODE); @@ -10522,7 +10445,7 @@ diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/atmel_usba_udc.c linux-2.6/driv sizeof(test_packet_buffer)); usba_ep_writel(ep, SET_STA, USBA_TX_PK_RDY); dev_info(dev, "Entering Test_Packet mode...\n"); -@@ -1530,13 +1457,13 @@ +@@ -1530,13 +1457,13 @@ restart: DBG(DBG_HW, "Packet length: %u\n", pkt_len); if (pkt_len != sizeof(crq)) { pr_warning("udc: Invalid packet length %u " @@ -10538,7 +10461,7 @@ diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/atmel_usba_udc.c linux-2.6/driv /* Free up one bank in the FIFO so that we can * generate or receive a reply right away. */ -@@ -1908,7 +1835,7 @@ +@@ -1908,7 +1835,7 @@ static int __init usba_udc_probe(struct regs = platform_get_resource(pdev, IORESOURCE_MEM, CTRL_IOMEM_ID); fifo = platform_get_resource(pdev, IORESOURCE_MEM, FIFO_IOMEM_ID); @@ -10547,7 +10470,7 @@ diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/atmel_usba_udc.c linux-2.6/driv return -ENXIO; irq = platform_get_irq(pdev, 0); -@@ -1956,16 +1883,44 @@ +@@ -1956,16 +1883,44 @@ static int __init usba_udc_probe(struct usba_writel(udc, CTRL, 0); clk_disable(pclk); @@ -10593,7 +10516,7 @@ diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/atmel_usba_udc.c linux-2.6/driv list_add_tail(&ep->ep.ep_list, &udc->gadget.ep_list); } -@@ -1984,7 +1939,7 @@ +@@ -1984,7 +1939,7 @@ static int __init usba_udc_probe(struct goto err_device_add; } @@ -10602,7 +10525,7 @@ diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/atmel_usba_udc.c linux-2.6/driv if (!gpio_request(pdata->vbus_pin, "atmel_usba_udc")) { udc->vbus_pin = pdata->vbus_pin; -@@ -2004,7 +1959,7 @@ +@@ -2004,7 +1959,7 @@ static int __init usba_udc_probe(struct } usba_init_debugfs(udc); @@ -10611,7 +10534,7 @@ diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/atmel_usba_udc.c linux-2.6/driv usba_ep_init_debugfs(udc, &usba_ep[i]); return 0; -@@ -2012,6 +1967,8 @@ +@@ -2012,6 +1967,8 @@ static int __init usba_udc_probe(struct err_device_add: free_irq(irq, udc); err_request_irq: @@ -10620,7 +10543,7 @@ diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/atmel_usba_udc.c linux-2.6/driv iounmap(udc->fifo); err_map_fifo: iounmap(udc->regs); -@@ -2029,10 +1986,11 @@ +@@ -2029,10 +1986,11 @@ static int __exit usba_udc_remove(struct { struct usba_udc *udc; int i; @@ -10633,10 +10556,9 @@ diff -urN -x CVS linux-2.6.25/drivers/usb/gadget/atmel_usba_udc.c linux-2.6/driv usba_ep_cleanup_debugfs(&usba_ep[i]); usba_cleanup_debugfs(udc); -diff -urN -x CVS linux-2.6.25/drivers/usb/host/ohci-at91.c linux-2.6/drivers/usb/host/ohci-at91.c ---- linux-2.6.25/drivers/usb/host/ohci-at91.c 2008-05-03 00:15:50.000000000 +0200 -+++ linux-2.6/drivers/usb/host/ohci-at91.c 2008-04-15 21:48:12.000000000 +0200 -@@ -330,7 +330,7 @@ +--- a/drivers/usb/host/ohci-at91.c ++++ b/drivers/usb/host/ohci-at91.c +@@ -330,7 +330,7 @@ ohci_hcd_at91_drv_suspend(struct platfor * * REVISIT: some boards will be able to turn VBUS off... */ @@ -10645,10 +10567,9 @@ diff -urN -x CVS linux-2.6.25/drivers/usb/host/ohci-at91.c linux-2.6/drivers/usb ohci_usb_reset (ohci); at91_stop_clock(); } -diff -urN -x CVS linux-2.6.25/drivers/video/Kconfig linux-2.6/drivers/video/Kconfig ---- linux-2.6.25/drivers/video/Kconfig 2008-05-03 00:15:50.000000000 +0200 -+++ linux-2.6/drivers/video/Kconfig 2008-04-02 22:11:30.000000000 +0200 -@@ -889,6 +889,17 @@ +--- a/drivers/video/Kconfig ++++ b/drivers/video/Kconfig +@@ -889,6 +889,17 @@ config FB_EPSON1355 framebuffer. Product specs at . @@ -10666,10 +10587,9 @@ diff -urN -x CVS linux-2.6.25/drivers/video/Kconfig linux-2.6/drivers/video/Kcon config FB_S1D13XXX tristate "Epson S1D13XXX framebuffer support" depends on FB -diff -urN -x CVS linux-2.6.25/drivers/video/Makefile linux-2.6/drivers/video/Makefile ---- linux-2.6.25/drivers/video/Makefile 2008-05-03 00:15:50.000000000 +0200 -+++ linux-2.6/drivers/video/Makefile 2008-04-02 22:11:30.000000000 +0200 -@@ -87,7 +87,8 @@ +--- a/drivers/video/Makefile ++++ b/drivers/video/Makefile +@@ -87,7 +87,8 @@ obj-$(CONFIG_FB_G364) += g36 obj-$(CONFIG_FB_SA1100) += sa1100fb.o obj-$(CONFIG_FB_HIT) += hitfb.o obj-$(CONFIG_FB_EPSON1355) += epson1355fb.o @@ -10679,9 +10599,8 @@ diff -urN -x CVS linux-2.6.25/drivers/video/Makefile linux-2.6/drivers/video/Mak obj-$(CONFIG_FB_PVR2) += pvr2fb.o obj-$(CONFIG_FB_VOODOO1) += sstfb.o obj-$(CONFIG_FB_ARMCLCD) += amba-clcd.o -diff -urN -x CVS linux-2.6.25/drivers/video/atmel_lcdfb.c linux-2.6/drivers/video/atmel_lcdfb.c ---- linux-2.6.25/drivers/video/atmel_lcdfb.c 2008-05-03 00:15:50.000000000 +0200 -+++ linux-2.6/drivers/video/atmel_lcdfb.c 2008-04-03 00:27:47.000000000 +0200 +--- a/drivers/video/atmel_lcdfb.c ++++ b/drivers/video/atmel_lcdfb.c @@ -31,7 +31,7 @@ #define ATMEL_LCDC_CVAL_DEFAULT 0xc8 #define ATMEL_LCDC_DMA_BURST_LEN 8 @@ -10691,7 +10610,7 @@ diff -urN -x CVS linux-2.6.25/drivers/video/atmel_lcdfb.c linux-2.6/drivers/vide #define ATMEL_LCDC_FIFO_SIZE 2048 #else #define ATMEL_LCDC_FIFO_SIZE 512 -@@ -903,11 +903,45 @@ +@@ -903,11 +903,45 @@ static int __exit atmel_lcdfb_remove(str return 0; } @@ -10740,10 +10659,9 @@ diff -urN -x CVS linux-2.6.25/drivers/video/atmel_lcdfb.c linux-2.6/drivers/vide .driver = { .name = "atmel_lcdfb", .owner = THIS_MODULE, -diff -urN -x CVS linux-2.6.25/drivers/video/backlight/Kconfig linux-2.6/drivers/video/backlight/Kconfig ---- linux-2.6.25/drivers/video/backlight/Kconfig 2008-05-03 00:15:50.000000000 +0200 -+++ linux-2.6/drivers/video/backlight/Kconfig 2008-03-09 18:51:50.000000000 +0200 -@@ -112,3 +112,11 @@ +--- a/drivers/video/backlight/Kconfig ++++ b/drivers/video/backlight/Kconfig +@@ -112,3 +112,11 @@ config BACKLIGHT_CARILLO_RANCH help If you have a Intel LE80578 (Carillo Ranch) say Y to enable the backlight driver. @@ -10755,17 +10673,15 @@ diff -urN -x CVS linux-2.6.25/drivers/video/backlight/Kconfig linux-2.6/drivers/ + help + If you have a KwikByte KB9202 board, say Y to enable the + backlight driver. -diff -urN -x CVS linux-2.6.25/drivers/video/backlight/Makefile linux-2.6/drivers/video/backlight/Makefile ---- linux-2.6.25/drivers/video/backlight/Makefile 2008-05-03 00:15:50.000000000 +0200 -+++ linux-2.6/drivers/video/backlight/Makefile 2008-03-09 15:14:55.000000000 +0200 -@@ -10,3 +10,4 @@ +--- a/drivers/video/backlight/Makefile ++++ b/drivers/video/backlight/Makefile +@@ -10,3 +10,4 @@ obj-$(CONFIG_BACKLIGHT_LOCOMO) += locomo obj-$(CONFIG_BACKLIGHT_OMAP1) += omap1_bl.o obj-$(CONFIG_BACKLIGHT_PROGEAR) += progear_bl.o obj-$(CONFIG_BACKLIGHT_CARILLO_RANCH) += cr_bllcd.o +obj-$(CONFIG_BACKLIGHT_KB920x) += kb920x_bl.o -diff -urN -x CVS linux-2.6.25/drivers/video/backlight/kb920x_bl.c linux-2.6/drivers/video/backlight/kb920x_bl.c ---- linux-2.6.25/drivers/video/backlight/kb920x_bl.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/drivers/video/backlight/kb920x_bl.c 2008-03-09 21:41:20.000000000 +0200 +--- /dev/null ++++ b/drivers/video/backlight/kb920x_bl.c @@ -0,0 +1,164 @@ +/* + * Backlight Driver for KB9202 @@ -10931,9 +10847,8 @@ diff -urN -x CVS linux-2.6.25/drivers/video/backlight/kb920x_bl.c linux-2.6/driv +MODULE_AUTHOR("KwikByte "); +MODULE_DESCRIPTION("KB9202 Backlight Driver"); +MODULE_LICENSE("GPL"); -diff -urN -x CVS linux-2.6.25/drivers/video/s1d15605fb.c linux-2.6/drivers/video/s1d15605fb.c ---- linux-2.6.25/drivers/video/s1d15605fb.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/drivers/video/s1d15605fb.c 2008-05-03 00:36:04.000000000 +0200 +--- /dev/null ++++ b/drivers/video/s1d15605fb.c @@ -0,0 +1,655 @@ +/* + * drivers/video/s1d15605.c @@ -11590,10 +11505,9 @@ diff -urN -x CVS linux-2.6.25/drivers/video/s1d15605fb.c linux-2.6/drivers/video +MODULE_AUTHOR("KwikByte"); +MODULE_DESCRIPTION("Epson S1D15605 LCD Controller framebuffer driver"); +MODULE_LICENSE("GPL"); -diff -urN -x CVS linux-2.6.25/drivers/watchdog/Kconfig linux-2.6/drivers/watchdog/Kconfig ---- linux-2.6.25/drivers/watchdog/Kconfig 2008-05-03 00:15:50.000000000 +0200 -+++ linux-2.6/drivers/watchdog/Kconfig 2008-03-09 15:14:55.000000000 +0200 -@@ -66,6 +66,14 @@ +--- a/drivers/watchdog/Kconfig ++++ b/drivers/watchdog/Kconfig +@@ -66,6 +66,14 @@ config AT91RM9200_WATCHDOG Watchdog timer embedded into AT91RM9200 chips. This will reboot your system when the timeout is reached. @@ -11608,10 +11522,9 @@ diff -urN -x CVS linux-2.6.25/drivers/watchdog/Kconfig linux-2.6/drivers/watchdo config 21285_WATCHDOG tristate "DC21285 watchdog" depends on FOOTBRIDGE -diff -urN -x CVS linux-2.6.25/drivers/watchdog/Makefile linux-2.6/drivers/watchdog/Makefile ---- linux-2.6.25/drivers/watchdog/Makefile 2008-05-03 00:15:50.000000000 +0200 -+++ linux-2.6/drivers/watchdog/Makefile 2008-03-09 15:14:55.000000000 +0200 -@@ -26,6 +26,7 @@ +--- a/drivers/watchdog/Makefile ++++ b/drivers/watchdog/Makefile +@@ -26,6 +26,7 @@ obj-$(CONFIG_USBPCWATCHDOG) += pcwd_usb. # ARM Architecture obj-$(CONFIG_AT91RM9200_WATCHDOG) += at91rm9200_wdt.o @@ -11619,9 +11532,8 @@ diff -urN -x CVS linux-2.6.25/drivers/watchdog/Makefile linux-2.6/drivers/watchd obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o obj-$(CONFIG_21285_WATCHDOG) += wdt285.o obj-$(CONFIG_977_WATCHDOG) += wdt977.o -diff -urN -x CVS linux-2.6.25/drivers/watchdog/at91sam9_wdt.c linux-2.6/drivers/watchdog/at91sam9_wdt.c ---- linux-2.6.25/drivers/watchdog/at91sam9_wdt.c 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/drivers/watchdog/at91sam9_wdt.c 2008-04-15 21:53:41.000000000 +0200 +--- /dev/null ++++ b/drivers/watchdog/at91sam9_wdt.c @@ -0,0 +1,259 @@ +/* + * Watchdog driver for Atmel AT91SAM9x processors. @@ -11882,9 +11794,8 @@ diff -urN -x CVS linux-2.6.25/drivers/watchdog/at91sam9_wdt.c linux-2.6/drivers/ +MODULE_LICENSE("GPL"); +MODULE_ALIAS_MISCDEV(WATCHDOG_MINOR); +MODULE_ALIAS("platform:at91_wdt"); -diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_ecc.h linux-2.6/include/asm-arm/arch-at91/at91_ecc.h ---- linux-2.6.25/include/asm-arm/arch-at91/at91_ecc.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91_ecc.h 2008-05-07 23:49:32.000000000 +0200 +--- a/include/asm-arm/arch-at91/at91_ecc.h ++++ b/include/asm-arm/arch-at91/at91_ecc.h @@ -1,6 +1,9 @@ /* * include/asm-arm/arch-at91/at91_ecc.h @@ -11927,9 +11838,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_ecc.h linux-2.6/inc #define AT91_ECC_NPARITY (0xffff << 0) /* NParity */ #endif -diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_pit.h linux-2.6/include/asm-arm/arch-at91/at91_pit.h ---- linux-2.6.25/include/asm-arm/arch-at91/at91_pit.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91_pit.h 2008-05-07 23:49:57.000000000 +0200 +--- a/include/asm-arm/arch-at91/at91_pit.h ++++ b/include/asm-arm/arch-at91/at91_pit.h @@ -1,6 +1,9 @@ /* * include/asm-arm/arch-at91/at91_pit.h @@ -11940,9 +11850,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_pit.h linux-2.6/inc * Periodic Interval Timer (PIT) - System peripherals regsters. * Based on AT91SAM9261 datasheet revision D. * -diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_pmc.h linux-2.6/include/asm-arm/arch-at91/at91_pmc.h ---- linux-2.6.25/include/asm-arm/arch-at91/at91_pmc.h 2008-05-03 00:15:51.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91_pmc.h 2008-05-05 22:01:39.000000000 +0200 +--- a/include/asm-arm/arch-at91/at91_pmc.h ++++ b/include/asm-arm/arch-at91/at91_pmc.h @@ -23,6 +23,7 @@ #define AT91_PMC_PCK (1 << 0) /* Processor Clock */ #define AT91RM9200_PMC_UDP (1 << 1) /* USB Devcice Port Clock [AT91RM9200 only] */ @@ -12011,9 +11920,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_pmc.h linux-2.6/inc +#define AT91_PMC_VER (AT91_PMC + 0xfc) /* PMC Module Version [AT91CAP9 only] */ + #endif -diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_rstc.h linux-2.6/include/asm-arm/arch-at91/at91_rstc.h ---- linux-2.6.25/include/asm-arm/arch-at91/at91_rstc.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91_rstc.h 2008-05-07 23:50:10.000000000 +0200 +--- a/include/asm-arm/arch-at91/at91_rstc.h ++++ b/include/asm-arm/arch-at91/at91_rstc.h @@ -1,6 +1,9 @@ /* * include/asm-arm/arch-at91/at91_rstc.h @@ -12024,9 +11932,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_rstc.h linux-2.6/in * Reset Controller (RSTC) - System peripherals regsters. * Based on AT91SAM9261 datasheet revision D. * -diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_rtt.h linux-2.6/include/asm-arm/arch-at91/at91_rtt.h ---- linux-2.6.25/include/asm-arm/arch-at91/at91_rtt.h 2008-05-03 00:15:51.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91_rtt.h 2008-05-07 23:51:11.000000000 +0200 +--- a/include/asm-arm/arch-at91/at91_rtt.h ++++ b/include/asm-arm/arch-at91/at91_rtt.h @@ -1,6 +1,9 @@ /* * include/asm-arm/arch-at91/at91_rtt.h @@ -12037,9 +11944,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_rtt.h linux-2.6/inc * Real-time Timer (RTT) - System peripherals regsters. * Based on AT91SAM9261 datasheet revision D. * -diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_shdwc.h linux-2.6/include/asm-arm/arch-at91/at91_shdwc.h ---- linux-2.6.25/include/asm-arm/arch-at91/at91_shdwc.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91_shdwc.h 2008-05-07 23:50:23.000000000 +0200 +--- a/include/asm-arm/arch-at91/at91_shdwc.h ++++ b/include/asm-arm/arch-at91/at91_shdwc.h @@ -1,6 +1,9 @@ /* * include/asm-arm/arch-at91/at91_shdwc.h @@ -12063,9 +11969,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_shdwc.h linux-2.6/i +#define AT91_SHDW_RTCWK (1 << 17) /* Real-time Clock Wake-up [SAM9RL] */ #endif -diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_tsc.h linux-2.6/include/asm-arm/arch-at91/at91_tsc.h ---- linux-2.6.25/include/asm-arm/arch-at91/at91_tsc.h 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91_tsc.h 2008-05-07 23:51:32.000000000 +0200 +--- /dev/null ++++ b/include/asm-arm/arch-at91/at91_tsc.h @@ -0,0 +1,76 @@ +/* + * include/asm-arm/arch-at91/at91_tsc.h @@ -12143,9 +12048,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_tsc.h linux-2.6/inc + +#endif + -diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_wdt.h linux-2.6/include/asm-arm/arch-at91/at91_wdt.h ---- linux-2.6.25/include/asm-arm/arch-at91/at91_wdt.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91_wdt.h 2008-05-07 23:51:43.000000000 +0200 +--- a/include/asm-arm/arch-at91/at91_wdt.h ++++ b/include/asm-arm/arch-at91/at91_wdt.h @@ -1,6 +1,9 @@ /* * include/asm-arm/arch-at91/at91_wdt.h @@ -12156,9 +12060,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91_wdt.h linux-2.6/inc * Watchdog Timer (WDT) - System peripherals regsters. * Based on AT91SAM9261 datasheet revision D. * -diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91cap9.h linux-2.6/include/asm-arm/arch-at91/at91cap9.h ---- linux-2.6.25/include/asm-arm/arch-at91/at91cap9.h 2008-05-03 00:15:51.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91cap9.h 2008-05-05 22:01:39.000000000 +0200 +--- a/include/asm-arm/arch-at91/at91cap9.h ++++ b/include/asm-arm/arch-at91/at91cap9.h @@ -101,7 +101,10 @@ #define AT91_RTT (0xfffffd20 - AT91_BASE_SYS) #define AT91_PIT (0xfffffd30 - AT91_BASE_SYS) @@ -12180,9 +12083,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91cap9.h linux-2.6/inc #define AT91CAP9_UHP_BASE 0x00700000 /* USB Host controller */ #define CONFIG_DRAM_BASE AT91_CHIPSELECT_6 -diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91cap9_ddrsdr.h linux-2.6/include/asm-arm/arch-at91/at91cap9_ddrsdr.h ---- linux-2.6.25/include/asm-arm/arch-at91/at91cap9_ddrsdr.h 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91cap9_ddrsdr.h 2008-05-07 21:33:47.000000000 +0200 +--- /dev/null ++++ b/include/asm-arm/arch-at91/at91cap9_ddrsdr.h @@ -0,0 +1,102 @@ +/* + * include/asm-arm/arch-at91/at91cap9_ddrsdr.h @@ -12286,9 +12188,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91cap9_ddrsdr.h linux- + + +#endif -diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91cap9_matrix.h linux-2.6/include/asm-arm/arch-at91/at91cap9_matrix.h ---- linux-2.6.25/include/asm-arm/arch-at91/at91cap9_matrix.h 2008-05-03 00:15:51.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91cap9_matrix.h 2008-04-18 19:20:34.000000000 +0200 +--- a/include/asm-arm/arch-at91/at91cap9_matrix.h ++++ b/include/asm-arm/arch-at91/at91cap9_matrix.h @@ -106,6 +106,11 @@ #define AT91_MPBS0_SFR (AT91_MATRIX + 0x114) /* MPBlock Slave 0 Special Function Register */ #define AT91_MPBS1_SFR (AT91_MATRIX + 0x11C) /* MPBlock Slave 1 Special Function Register */ @@ -12301,9 +12202,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91cap9_matrix.h linux- #define AT91_MATRIX_EBICSA (AT91_MATRIX + 0x120) /* EBI Chip Select Assignment Register */ #define AT91_MATRIX_EBI_CS1A (1 << 1) /* Chip Select 1 Assignment */ #define AT91_MATRIX_EBI_CS1A_SMC (0 << 1) -diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam9260_matrix.h linux-2.6/include/asm-arm/arch-at91/at91sam9260_matrix.h ---- linux-2.6.25/include/asm-arm/arch-at91/at91sam9260_matrix.h 2008-05-03 00:15:51.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91sam9260_matrix.h 2008-05-07 12:07:13.000000000 +0200 +--- a/include/asm-arm/arch-at91/at91sam9260_matrix.h ++++ b/include/asm-arm/arch-at91/at91sam9260_matrix.h @@ -1,6 +1,8 @@ /* * include/asm-arm/arch-at91/at91sam9260_matrix.h @@ -12313,9 +12213,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam9260_matrix.h lin * Memory Controllers (MATRIX, EBI) - System peripherals registers. * Based on AT91SAM9260 datasheet revision B. * -diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam9261_matrix.h linux-2.6/include/asm-arm/arch-at91/at91sam9261_matrix.h ---- linux-2.6.25/include/asm-arm/arch-at91/at91sam9261_matrix.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91sam9261_matrix.h 2008-05-07 12:07:24.000000000 +0200 +--- a/include/asm-arm/arch-at91/at91sam9261_matrix.h ++++ b/include/asm-arm/arch-at91/at91sam9261_matrix.h @@ -1,6 +1,8 @@ /* * include/asm-arm/arch-at91/at91sam9261_matrix.h @@ -12325,9 +12224,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam9261_matrix.h lin * Memory Controllers (MATRIX, EBI) - System peripherals registers. * Based on AT91SAM9261 datasheet revision D. * -diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam926x_mc.h linux-2.6/include/asm-arm/arch-at91/at91sam926x_mc.h ---- linux-2.6.25/include/asm-arm/arch-at91/at91sam926x_mc.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91sam926x_mc.h 1970-01-01 02:00:00.000000000 +0200 +--- a/include/asm-arm/arch-at91/at91sam926x_mc.h ++++ /dev/null @@ -1,141 +0,0 @@ -/* - * include/asm-arm/arch-at91/at91sam926x_mc.h @@ -12470,9 +12368,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam926x_mc.h linux-2 -#endif - -#endif -diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam9_sdramc.h linux-2.6/include/asm-arm/arch-at91/at91sam9_sdramc.h ---- linux-2.6.25/include/asm-arm/arch-at91/at91sam9_sdramc.h 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91sam9_sdramc.h 2008-05-07 23:51:59.000000000 +0200 +--- /dev/null ++++ b/include/asm-arm/arch-at91/at91sam9_sdramc.h @@ -0,0 +1,86 @@ +/* + * include/asm-arm/arch-at91/at91sam9_sdramc.h @@ -12560,9 +12457,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam9_sdramc.h linux- + + +#endif -diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam9_smc.h linux-2.6/include/asm-arm/arch-at91/at91sam9_smc.h ---- linux-2.6.25/include/asm-arm/arch-at91/at91sam9_smc.h 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91sam9_smc.h 2008-05-07 23:52:15.000000000 +0200 +--- /dev/null ++++ b/include/asm-arm/arch-at91/at91sam9_smc.h @@ -0,0 +1,76 @@ +/* + * include/asm-arm/arch-at91/at91sam9_smc.h @@ -12640,9 +12536,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam9_smc.h linux-2.6 +#endif + +#endif -diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam9rl.h linux-2.6/include/asm-arm/arch-at91/at91sam9rl.h ---- linux-2.6.25/include/asm-arm/arch-at91/at91sam9rl.h 2008-05-03 00:15:51.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/at91sam9rl.h 2008-04-18 19:22:02.000000000 +0200 +--- a/include/asm-arm/arch-at91/at91sam9rl.h ++++ b/include/asm-arm/arch-at91/at91sam9rl.h @@ -110,6 +110,6 @@ #define AT91SAM9RL_ROM_SIZE (2 * SZ_16K) /* Internal ROM size (32Kb) */ @@ -12651,9 +12546,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/at91sam9rl.h linux-2.6/i +#define AT91SAM9RL_UDPHS_FIFO 0x00600000 /* USB Device HS controller */ #endif -diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/board.h linux-2.6/include/asm-arm/arch-at91/board.h ---- linux-2.6.25/include/asm-arm/arch-at91/board.h 2008-05-03 00:15:51.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/board.h 2008-05-02 00:40:32.000000000 +0200 +--- a/include/asm-arm/arch-at91/board.h ++++ b/include/asm-arm/arch-at91/board.h @@ -36,6 +36,7 @@ #include #include @@ -12662,7 +12556,7 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/board.h linux-2.6/includ /* USB Device */ struct at91_udc_data { -@@ -45,6 +46,9 @@ +@@ -45,6 +46,9 @@ struct at91_udc_data { }; extern void __init at91_add_device_udc(struct at91_udc_data *data); @@ -12672,7 +12566,7 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/board.h linux-2.6/includ /* Compact Flash */ struct at91_cf_data { u8 irq_pin; /* I/O IRQ */ -@@ -158,6 +162,9 @@ +@@ -158,6 +162,9 @@ extern void __init at91_add_device_ac97( /* ISI */ extern void __init at91_add_device_isi(void); @@ -12682,10 +12576,9 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/board.h linux-2.6/includ /* LEDs */ extern void __init at91_init_leds(u8 cpu_led, u8 timer_led); extern void __init at91_gpio_leds(struct gpio_led *leds, int nr); -diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/cpu.h linux-2.6/include/asm-arm/arch-at91/cpu.h ---- linux-2.6.25/include/asm-arm/arch-at91/cpu.h 2008-05-03 00:15:51.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/cpu.h 2008-05-05 22:10:58.000000000 +0200 -@@ -48,6 +48,17 @@ +--- a/include/asm-arm/arch-at91/cpu.h ++++ b/include/asm-arm/arch-at91/cpu.h +@@ -48,6 +48,17 @@ static inline unsigned long at91_arch_id return (at91_sys_read(AT91_DBGU_CIDR) & AT91_CIDR_ARCH); } @@ -12703,7 +12596,7 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/cpu.h linux-2.6/include/ #ifdef CONFIG_ARCH_AT91RM9200 #define cpu_is_at91rm9200() (at91_cpu_identify() == ARCH_ID_AT91RM9200) -@@ -83,8 +94,12 @@ +@@ -83,8 +94,12 @@ static inline unsigned long at91_arch_id #ifdef CONFIG_ARCH_AT91CAP9 #define cpu_is_at91cap9() (at91_cpu_identify() == ARCH_ID_AT91CAP9) @@ -12716,9 +12609,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/cpu.h linux-2.6/include/ #endif /* -diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/ics1523.h linux-2.6/include/asm-arm/arch-at91/ics1523.h ---- linux-2.6.25/include/asm-arm/arch-at91/ics1523.h 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/ics1523.h 2008-01-16 21:24:29.000000000 +0200 +--- /dev/null ++++ b/include/asm-arm/arch-at91/ics1523.h @@ -0,0 +1,154 @@ +//*---------------------------------------------------------------------------- +//* ATMEL Microcontroller Software Support - ROUSSET - @@ -12874,9 +12766,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/ics1523.h linux-2.6/incl +int at91_ics1523_init(void); + +#endif /* ics1523_h */ -diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/spi.h linux-2.6/include/asm-arm/arch-at91/spi.h ---- linux-2.6.25/include/asm-arm/arch-at91/spi.h 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/spi.h 2008-01-16 21:24:29.000000000 +0200 +--- /dev/null ++++ b/include/asm-arm/arch-at91/spi.h @@ -0,0 +1,54 @@ +/* + * Serial Peripheral Interface (SPI) driver for the Atmel AT91RM9200 @@ -12932,9 +12823,8 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/spi.h linux-2.6/include/ +extern int spi_transfer(struct spi_transfer_list* list); + +#endif -diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/timex.h linux-2.6/include/asm-arm/arch-at91/timex.h ---- linux-2.6.25/include/asm-arm/arch-at91/timex.h 2008-05-03 00:15:51.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-at91/timex.h 2008-04-18 18:30:40.000000000 +0200 +--- a/include/asm-arm/arch-at91/timex.h ++++ b/include/asm-arm/arch-at91/timex.h @@ -27,14 +27,29 @@ #define CLOCK_TICK_RATE (AT91_SLOW_CLOCK) @@ -12966,10 +12856,9 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-at91/timex.h linux-2.6/includ #define CLOCK_TICK_RATE (AT91SAM9_MASTER_CLOCK/16) #elif defined(CONFIG_ARCH_AT91SAM9RL) -diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-ks8695/devices.h linux-2.6/include/asm-arm/arch-ks8695/devices.h ---- linux-2.6.25/include/asm-arm/arch-ks8695/devices.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/asm-arm/arch-ks8695/devices.h 2007-12-31 10:44:34.000000000 +0200 -@@ -18,6 +18,11 @@ +--- a/include/asm-arm/arch-ks8695/devices.h ++++ b/include/asm-arm/arch-ks8695/devices.h +@@ -18,6 +18,11 @@ extern void __init ks8695_add_device_wan extern void __init ks8695_add_device_lan(void); extern void __init ks8695_add_device_hpna(void); @@ -12981,10 +12870,9 @@ diff -urN -x CVS linux-2.6.25/include/asm-arm/arch-ks8695/devices.h linux-2.6/in /* PCI */ #define KS8695_MODE_PCI 0 #define KS8695_MODE_MINIPCI 1 -diff -urN -x CVS linux-2.6.25/include/linux/clk.h linux-2.6/include/linux/clk.h ---- linux-2.6.25/include/linux/clk.h 2007-10-09 22:31:38.000000000 +0200 -+++ linux-2.6/include/linux/clk.h 2007-12-31 10:44:34.000000000 +0200 -@@ -121,4 +121,24 @@ +--- a/include/linux/clk.h ++++ b/include/linux/clk.h +@@ -121,4 +121,24 @@ int clk_set_parent(struct clk *clk, stru */ struct clk *clk_get_parent(struct clk *clk); @@ -13009,9 +12897,8 @@ diff -urN -x CVS linux-2.6.25/include/linux/clk.h linux-2.6/include/linux/clk.h +int clk_must_disable(struct clk *clk); + #endif -diff -urN -x CVS linux-2.6.25/include/linux/i2c-id.h linux-2.6/include/linux/i2c-id.h ---- linux-2.6.25/include/linux/i2c-id.h 2008-05-03 00:15:52.000000000 +0200 -+++ linux-2.6/include/linux/i2c-id.h 2008-03-09 15:43:48.000000000 +0200 +--- a/include/linux/i2c-id.h ++++ b/include/linux/i2c-id.h @@ -131,6 +131,7 @@ /* --- PCA 9564 based algorithms */ @@ -13020,9 +12907,8 @@ diff -urN -x CVS linux-2.6.25/include/linux/i2c-id.h linux-2.6/include/linux/i2c /* --- PowerPC on-chip adapters */ #define I2C_HW_OCP 0x120000 /* IBM on-chip I2C adapter */ -diff -urN -x CVS linux-2.6.25/include/linux/usb/atmel_usba_udc.h linux-2.6/include/linux/usb/atmel_usba_udc.h ---- linux-2.6.25/include/linux/usb/atmel_usba_udc.h 1970-01-01 02:00:00.000000000 +0200 -+++ linux-2.6/include/linux/usb/atmel_usba_udc.h 2008-05-03 00:31:09.000000000 +0200 +--- /dev/null ++++ b/include/linux/usb/atmel_usba_udc.h @@ -0,0 +1,23 @@ +/* +* Platform data definitions for Atmel USBA gadget driver. @@ -13047,10 +12933,9 @@ diff -urN -x CVS linux-2.6.25/include/linux/usb/atmel_usba_udc.h linux-2.6/inclu + +#endif /* __LINUX_USB_USBA_H */ + -diff -urN -x CVS linux-2.6.25/include/video/atmel_lcdc.h linux-2.6/include/video/atmel_lcdc.h ---- linux-2.6.25/include/video/atmel_lcdc.h 2008-05-03 00:15:53.000000000 +0200 -+++ linux-2.6/include/video/atmel_lcdc.h 2008-03-09 15:53:40.000000000 +0200 -@@ -39,6 +39,7 @@ +--- a/include/video/atmel_lcdc.h ++++ b/include/video/atmel_lcdc.h +@@ -39,6 +39,7 @@ struct atmel_lcdfb_info { u8 bl_power; #endif bool lcdcon_is_backlight; @@ -13058,9 +12943,8 @@ diff -urN -x CVS linux-2.6.25/include/video/atmel_lcdc.h linux-2.6/include/video u8 default_bpp; unsigned int default_lcdcon2; -diff -urN -x CVS linux-2.6.25/sound/soc/at91/eti_b1_wm8731.c linux-2.6/sound/soc/at91/eti_b1_wm8731.c ---- linux-2.6.25/sound/soc/at91/eti_b1_wm8731.c 2008-05-03 00:15:56.000000000 +0200 -+++ linux-2.6/sound/soc/at91/eti_b1_wm8731.c 2008-03-09 15:15:07.000000000 +0200 +--- a/sound/soc/at91/eti_b1_wm8731.c ++++ b/sound/soc/at91/eti_b1_wm8731.c @@ -33,8 +33,7 @@ #include #include @@ -13085,7 +12969,7 @@ diff -urN -x CVS linux-2.6.25/sound/soc/at91/eti_b1_wm8731.c linux-2.6/sound/soc static struct clk *pck1_clk; static struct clk *pllb_clk; -@@ -276,7 +268,6 @@ +@@ -276,7 +268,6 @@ static struct platform_device *eti_b1_sn static int __init eti_b1_init(void) { int ret; @@ -13093,7 +12977,7 @@ diff -urN -x CVS linux-2.6.25/sound/soc/at91/eti_b1_wm8731.c linux-2.6/sound/soc struct at91_ssc_periph *ssc = eti_b1_dai.cpu_dai->private_data; if (!request_mem_region(AT91RM9200_BASE_SSC1, SZ_16K, "soc-audio")) { -@@ -310,19 +301,12 @@ +@@ -310,19 +301,12 @@ static int __init eti_b1_init(void) goto fail_io_unmap; } @@ -13119,10 +13003,9 @@ diff -urN -x CVS linux-2.6.25/sound/soc/at91/eti_b1_wm8731.c linux-2.6/sound/soc /* * Set PCK1 parent to PLLB and its rate to 12 Mhz. -diff -urN -x CVS linux-2.6.25/sound/spi/at73c213.c linux-2.6/sound/spi/at73c213.c ---- linux-2.6.25/sound/spi/at73c213.c 2008-05-03 00:15:56.000000000 +0200 -+++ linux-2.6/sound/spi/at73c213.c 2008-03-09 15:15:07.000000000 +0200 -@@ -114,7 +114,11 @@ +--- a/sound/spi/at73c213.c ++++ b/sound/spi/at73c213.c +@@ -114,7 +114,11 @@ snd_at73c213_write_reg(struct snd_at73c2 static struct snd_pcm_hardware snd_at73c213_playback_hw = { .info = SNDRV_PCM_INFO_INTERLEAVED | SNDRV_PCM_INFO_BLOCK_TRANSFER,