X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/94061cfeeb7f057cc50f5282b5ef010052ffea9c..2a88ac56956dbae4320bb19b2a17536d7757049c:/target/linux/ixp4xx/patches-2.6.26/030-ixp4xx_fsg_board_support.patch diff --git a/target/linux/ixp4xx/patches-2.6.26/030-ixp4xx_fsg_board_support.patch b/target/linux/ixp4xx/patches-2.6.26/030-ixp4xx_fsg_board_support.patch index 8fb7280e0..1707cff69 100644 --- a/target/linux/ixp4xx/patches-2.6.26/030-ixp4xx_fsg_board_support.patch +++ b/target/linux/ixp4xx/patches-2.6.26/030-ixp4xx_fsg_board_support.patch @@ -1,53 +1,6 @@ -From: Rod Whitby -Subject: [PATCH] ixp4xx: Add support for the Freecom FSG-3 board (Patch #4874) - -The Freecom-FSG3 is a small network-attached-storage device with the -following feature set: - -* Intel IXP422 -* 4MB Flash (ixp4xx flash driver) -* 64MB RAM -* 4 USB 2.0 host ports (ehci and ohci drivers) -* 1 WAN (eth1) and 3 LAN (eth0) ethernet ports - * Supported by the open source ixp4xx ethernet driver -* Via VT6421 disk controller (libata and sata-via drivers) - * Internal hard disk (PATA supported, SATA not yet supported) - * External SATA port (not yet supported) -* ISL1208 RTC chip -* Winbond 83782 temp sensor and fan controller -* MiniPCI slot - -The ixp4xx_defconfig is also updated to support this device (the -leds-fsg driver is to be submitted separately via the leds tree after -this initial support is merged, as it depends on header gpio defines). - -Signed-off-by: Rod Whitby - -PATCH FOLLOWS -KernelVersion: v2.6.25-rc6-74-g264e3e8 ---- - -Updated to correct all issues found by RMK. - -The front power button calls ctrl_alt_del() and the rear reset button -now calls machine_restart() directly. - - arch/arm/configs/ixp4xx_defconfig | 9 +- - arch/arm/mach-ixp4xx/Kconfig | 9 + - arch/arm/mach-ixp4xx/Makefile | 2 + - arch/arm/mach-ixp4xx/fsg-pci.c | 71 ++++++++ - arch/arm/mach-ixp4xx/fsg-setup.c | 276 ++++++++++++++++++++++++++++++++ - include/asm-arm/arch-ixp4xx/fsg.h | 50 ++++++ - include/asm-arm/arch-ixp4xx/hardware.h | 1 + - include/asm-arm/arch-ixp4xx/irqs.h | 7 + - 8 files changed, 421 insertions(+), 4 deletions(-) - create mode 100644 arch/arm/mach-ixp4xx/fsg-pci.c - create mode 100644 arch/arm/mach-ixp4xx/fsg-setup.c - create mode 100644 include/asm-arm/arch-ixp4xx/fsg.h - --- a/arch/arm/configs/ixp4xx_defconfig +++ b/arch/arm/configs/ixp4xx_defconfig -@@ -165,6 +165,7 @@ +@@ -165,6 +165,7 @@ CONFIG_ARCH_PRPMC1100=y CONFIG_MACH_NAS100D=y CONFIG_MACH_DSMG600=y CONFIG_ARCH_IXDP4XX=y @@ -55,7 +8,7 @@ now calls machine_restart() directly. CONFIG_CPU_IXP46X=y CONFIG_CPU_IXP43X=y CONFIG_MACH_GTWX5715=y -@@ -770,7 +771,7 @@ +@@ -770,7 +771,7 @@ CONFIG_ATA=y # CONFIG_SATA_SIL24 is not set # CONFIG_SATA_SIS is not set # CONFIG_SATA_ULI is not set @@ -64,7 +17,7 @@ now calls machine_restart() directly. # CONFIG_SATA_VITESSE is not set # CONFIG_SATA_INIC162X is not set # CONFIG_PATA_ALI is not set -@@ -1143,7 +1144,7 @@ +@@ -1143,7 +1144,7 @@ CONFIG_HWMON=y # CONFIG_SENSORS_VIA686A is not set # CONFIG_SENSORS_VT1211 is not set # CONFIG_SENSORS_VT8231 is not set @@ -73,7 +26,7 @@ now calls machine_restart() directly. # CONFIG_SENSORS_W83791D is not set # CONFIG_SENSORS_W83792D is not set # CONFIG_SENSORS_W83793 is not set -@@ -1334,8 +1335,8 @@ +@@ -1334,8 +1335,8 @@ CONFIG_LEDS_CLASS=y # # LED drivers # @@ -83,7 +36,7 @@ now calls machine_restart() directly. # # LED Triggers -@@ -1367,7 +1368,7 @@ +@@ -1367,7 +1368,7 @@ CONFIG_RTC_INTF_DEV=y # CONFIG_RTC_DRV_DS1672 is not set # CONFIG_RTC_DRV_MAX6900 is not set # CONFIG_RTC_DRV_RS5C372 is not set @@ -94,7 +47,7 @@ now calls machine_restart() directly. # CONFIG_RTC_DRV_PCF8583 is not set --- a/arch/arm/mach-ixp4xx/Kconfig +++ b/arch/arm/mach-ixp4xx/Kconfig -@@ -125,6 +125,15 @@ +@@ -125,6 +125,15 @@ config ARCH_IXDP4XX depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435 default y @@ -112,7 +65,7 @@ now calls machine_restart() directly. # --- a/arch/arm/mach-ixp4xx/Makefile +++ b/arch/arm/mach-ixp4xx/Makefile -@@ -15,6 +15,7 @@ +@@ -15,6 +15,7 @@ obj-pci-$(CONFIG_MACH_NAS100D) += nas10 obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o @@ -120,7 +73,7 @@ now calls machine_restart() directly. obj-y += common.o -@@ -28,6 +29,7 @@ +@@ -28,6 +29,7 @@ obj-$(CONFIG_MACH_NAS100D) += nas100d-se obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o @@ -271,7 +224,7 @@ now calls machine_restart() directly. + +static struct i2c_board_info __initdata fsg_i2c_board_info [] = { + { -+ I2C_BOARD_INFO("rtc-isl1208", 0x6f), ++ I2C_BOARD_INFO("isl1208", 0x6f), + }, +}; +