X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/9765eded20b27f26a13947613ebc4728ab06de35..fb9f9cdc813406041715d4c692f2b18cfd418cee:/package/madwifi/files/lib/wifi/madwifi.sh?ds=inline diff --git a/package/madwifi/files/lib/wifi/madwifi.sh b/package/madwifi/files/lib/wifi/madwifi.sh index 0ff929260..9e0e70b38 100755 --- a/package/madwifi/files/lib/wifi/madwifi.sh +++ b/package/madwifi/files/lib/wifi/madwifi.sh @@ -4,7 +4,7 @@ append DRIVERS "atheros" scan_atheros() { local device="$1" local wds - local adhoc sta ap + local adhoc ahdemo sta ap monitor config_get vifs "$device" vifs for vif in $vifs; do @@ -31,7 +31,7 @@ scan_atheros() { esac done - case "${adhoc:+1}:${sta:+1}:${ap+1}" in + case "${adhoc:+1}:${sta:+1}:${ap:+1}" in # valid mode combinations 1::) wds="";; 1::1);; @@ -67,26 +67,106 @@ disable_atheros() ( enable_atheros() { local device="$1" + + config_get regdomain "$device" regdomain + [ -n "$regdomain" ] && echo "$regdomain" > /proc/sys/dev/$device/regdomain + + config_get country "$device" country + [ -z "$country" ] && country="0" + echo "$country" > /proc/sys/dev/$device/countrycode + + config_get_bool outdoor "$device" outdoor "0" + echo "$outdoor" > /proc/sys/dev/$device/outdoor + config_get channel "$device" channel config_get vifs "$device" vifs + config_get txpower "$device" txpower [ auto = "$channel" ] && channel=0 - local first=1 + config_get_bool antdiv "$device" diversity + config_get antrx "$device" rxantenna + config_get anttx "$device" txantenna + config_get_bool softled "$device" softled + config_get antenna "$device" antenna + + devname="$(cat /proc/sys/dev/$device/dev_name)" + local antgpio= + local invert= + case "$devname" in + NanoStation2) antgpio=7; invert=1;; + NanoStation5) antgpio=1; invert=1;; + "NanoStation Loco2") antgpio=2;; + "NanoStation Loco5") + case "$antenna" in + horizontal) antdiv=0; anttx=1; antrx=1;; + vertical) antdiv=0; anttx=2; antrx=2;; + *) antdiv=1; anttx=0; antrx=0;; + esac + ;; + esac + if [ -n "$invert" ]; then + _set="clear" + _clear="set" + else + _set="set" + _clear="clear" + fi + if [ -n "$antgpio" ]; then + softled=0 + case "$devname" in + "NanoStation Loco2") + antdiv=0 + antrx=1 + anttx=1 + case "$antenna" in + horizontal) gpioval=0;; + *) gpioval=1;; + esac + ;; + *) + case "$antenna" in + external) antdiv=0; antrx=1; anttx=1; gpioval=1;; + horizontal) antdiv=0; antrx=1; anttx=1; gpioval=0;; + vertical) antdiv=0; antrx=2; anttx=2; gpioval=0;; + auto) antdiv=1; antrx=0; anttx=0; gpioval=0;; + esac + ;; + esac + + [ -x "$(which gpioctl 2>/dev/null)" ] || antenna= + gpioctl "dirout" "$antgpio" >/dev/null 2>&1 + case "$gpioval" in + 0) + gpioctl "$_clear" "$antgpio" >/dev/null 2>&1 + ;; + 1) + gpioctl "$_set" "$antgpio" >/dev/null 2>&1 + ;; + esac + fi + + [ -n "$antdiv" ] && sysctl -w dev."$device".diversity="$antdiv" >&- + [ -n "$antrx" ] && sysctl -w dev."$device".rxantenna="$antrx" >&- + [ -n "$anttx" ] && sysctl -w dev."$device".txantenna="$anttx" >&- + [ -n "$softled" ] && sysctl -w dev."$device".softled="$softled" >&- + + config_get distance "$device" distance + [ -n "$distance" ] && sysctl -w dev."$device".distance="$distance" >&- + for vif in $vifs; do - local start_hostapd - nosbeacon= + local start_hostapd= vif_txpower= nosbeacon= config_get ifname "$vif" ifname config_get enc "$vif" encryption config_get eap_type "$vif" eap_type config_get mode "$vif" mode case "$mode" in - sta) config_get nosbeacon "$device" nosbeacon;; - adhoc) config_get nosbeacon "$vif" sw_merge;; + sta) config_get_bool nosbeacon "$device" nosbeacon;; + adhoc) config_get_bool nosbeacon "$vif" sw_merge 1;; esac - config_get ifname "$vif" ifname + [ "$nosbeacon" = 1 ] || nosbeacon="" ifname=$(wlanconfig "$ifname" create wlandev "$device" wlanmode "$mode" ${nosbeacon:+nosbeacon}) [ $? -ne 0 ] && { echo "enable_atheros($device): Failed to set up $mode vif $ifname" >&2 @@ -94,29 +174,26 @@ enable_atheros() { } config_set "$vif" ifname "$ifname" - # only need to change freq band and channel on the first vif - config_get agmode "$device" agmode - [ -z "$agmode" ] && config_get agmode "$device" mode + config_get hwmode "$device" hwmode + [ -z "$hwmode" ] && config_get hwmode "$device" mode pureg=0 - case "$agmode" in - *b) agmode=11b;; - *bg) agmode=11g;; - *g) agmode=11g; pureg=1;; - *gdt) agmode=11gdt;; - *a) agmode=11a;; - *adt) agmode=11adt;; - *ast) agmode=11ast;; - *fh) agmode=fh;; - *) agmode=auto;; + case "$hwmode" in + *b) hwmode=11b;; + *bg) hwmode=11g;; + *g) hwmode=11g; pureg=1;; + *gdt) hwmode=11gdt;; + *a) hwmode=11a;; + *adt) hwmode=11adt;; + *ast) hwmode=11ast;; + *fh) hwmode=fh;; + *) hwmode=auto;; esac - iwpriv "$ifname" mode "$agmode" + iwpriv "$ifname" mode "$hwmode" iwpriv "$ifname" pureg "$pureg" - [ "$first" = 1 ] && { - iwconfig "$ifname" channel "$channel" >/dev/null 2>/dev/null - } - + iwconfig "$ifname" channel "$channel" >/dev/null 2>/dev/null + config_get_bool hidden "$vif" hidden 0 iwpriv "$ifname" hide_ssid "$hidden" @@ -130,7 +207,7 @@ enable_atheros() { 1|on|enabled) wds=1;; *) wds=0;; esac - iwpriv "$ifname" wds "$wds" + iwpriv "$ifname" wds "$wds" >/dev/null 2>&1 [ "$mode" = ap -a "$wds" = 1 ] && { config_get_bool wdssep "$vif" wdssep 1 @@ -138,7 +215,11 @@ enable_atheros() { } case "$enc" in - WEP|wep) + wep*) + case "$enc" in + *shared*) iwpriv "$ifname" authmode 2;; + *) iwpriv "$ifname" authmode 1;; + esac for idx in 1 2 3 4; do config_get key "$vif" "key${idx}" iwconfig "$ifname" enc "[$idx]" "${key:-off}" @@ -157,63 +238,20 @@ enable_atheros() { esac case "$mode" in - adhoc|ahdemo) + sta|adhoc|ahdemo) config_get addr "$vif" bssid [ -z "$addr" ] || { iwconfig "$ifname" ap "$addr" } ;; esac - config_get ssid "$vif" ssid + + config_get_bool uapsd "$vif" uapsd 0 + iwpriv "$ifname" uapsd "$uapsd" config_get_bool bgscan "$vif" bgscan [ -n "$bgscan" ] && iwpriv "$ifname" bgscan "$bgscan" - config_get_bool antdiv "$device" diversity - config_get antrx "$device" rxantenna - config_get anttx "$device" txantenna - config_get_bool softled "$device" softled 1 - - devname="$(cat /proc/sys/dev/$device/dev_name)" - antgpio= - case "$devname" in - NanoStation2) antgpio=7;; - NanoStation5) antgpio=1;; - esac - if [ -n "$antgpio" ]; then - softled=0 - config_get antenna "$device" antenna - case "$antenna" in - external) antdiv=0; antrx=1; anttx=1 ;; - horizontal) antdiv=0; antrx=1; anttx=1 ;; - vertical) antdiv=0; antrx=2; anttx=2 ;; - auto) antdiv=1; antrx=0; anttx=0 ;; - esac - - [ -x "$(which gpioctl 2>/dev/null)" ] || antenna= - case "$antenna" in - horizontal|vertical|auto) - gpioctl "dirout" "$antgpio" >/dev/null 2>&1 - gpioctl "set" "$antgpio" >/dev/null 2>&1 - ;; - external) - gpioctl "dirout" "$antgpio" >/dev/null 2>&1 - gpioctl "clear" "$antgpio" >/dev/null 2>&1 - ;; - esac - fi - - [ -n "$antdiv" ] && sysctl -w dev."$device".diversity="$antdiv" >&- - [ -n "$antrx" ] && sysctl -w dev."$device".rxantenna="$antrx" >&- - [ -n "$anttx" ] && sysctl -w dev."$device".txantenna="$anttx" >&- - [ -n "$softled" ] && sysctl -w dev."$device".softled="$softled" >&- - - config_get distance "$device" distance - [ -n "$distance" ] && athctrl -i "$device" -d "$distance" >&- - - config_get txpwr "$vif" txpower - [ -n "$txpwr" ] && iwconfig "$ifname" txpower "${txpwr%%.*}" - config_get rate "$vif" rate [ -n "$rate" ] && iwconfig "$ifname" rate "${rate%%.*}" @@ -226,8 +264,8 @@ enable_atheros() { config_get rts "$vif" rts [ -n "$rts" ] && iwconfig "$ifname" rts "${rts%%.*}" - config_get_bool comp "$vif" compression - [ -n "$comp" ] && iwpriv "$ifname" compression "$comp" + config_get_bool comp "$vif" compression 0 + iwpriv "$ifname" compression "$comp" >/dev/null 2>&1 config_get_bool minrate "$vif" minrate [ -n "$minrate" ] && iwpriv "$ifname" minrate "$minrate" @@ -247,12 +285,15 @@ enable_atheros() { config_get_bool ar "$vif" ar [ -n "$ar" ] && iwpriv "$ifname" ar "$ar" - config_get_bool turbo "$vif" turbo - [ -n "$turbo" ] && iwpriv "$ifname" turbo "$turbo" + config_get_bool beacon_power "$vif" beacon_power + [ -n "$beacon_power" ] && iwpriv "$ifname" beacon_pwr "$beacon_power" config_get_bool doth "$vif" doth 0 [ -n "$doth" ] && iwpriv "$ifname" doth "$doth" + config_get_bool probereq "$vif" probereq + [ -n "$probereq" ] && iwpriv "$ifname" probereq "$probereq" + config_get maclist "$vif" maclist [ -n "$maclist" ] && { # flush MAC list @@ -277,6 +318,7 @@ enable_atheros() { esac ifconfig "$ifname" up + local net_cfg bridge net_cfg="$(find_net_config "$vif")" [ -z "$net_cfg" ] || { @@ -284,9 +326,25 @@ enable_atheros() { config_set "$vif" bridge "$bridge" start_net "$ifname" "$net_cfg" } - [ -n "$ssid" ] && iwconfig "$ifname" essid on - iwconfig "$ifname" essid "$ssid" + + config_get ssid "$vif" ssid + [ -n "$ssid" ] && { + iwconfig "$ifname" essid on + iwconfig "$ifname" essid "$ssid" + } + set_wifi_up "$vif" "$ifname" + + # TXPower settings only work if device is up already + # while atheros hardware theoretically is capable of per-vif (even per-packet) txpower + # adjustment it does not work with the current atheros hal/madwifi driver + + config_get vif_txpower "$vif" txpower + # use vif_txpower (from wifi-iface) instead of txpower (from wifi-device) if + # the latter doesn't exist + txpower="${txpower:-$vif_txpower}" + [ -z "$txpower" ] || iwconfig "$ifname" txpower "${txpower%%.*}" + case "$mode" in ap) config_get_bool isolate "$vif" isolate 0 @@ -313,7 +371,6 @@ enable_atheros() { fi ;; esac - first=0 done } @@ -325,6 +382,18 @@ detect_atheros() { config_get type "$dev" type devname="$(cat /proc/sys/dev/$dev/dev_name)" case "$devname" in + "NanoStation Loco2") + EXTRA_DEV=" +# Ubiquiti NanoStation Loco2 features + option antenna vertical # (horizontal|vertical) +" + ;; + "NanoStation Loco5") + EXTRA_DEV=" +# Ubiquiti NanoStation Loco5 features + option antenna auto # (auto|horizontal|vertical) +" + ;; NanoStation*) EXTRA_DEV=" # Ubiquiti NanoStation features @@ -332,7 +401,7 @@ detect_atheros() { " ;; esac - [ "$type" = atheros ] && return + [ "$type" = atheros ] && continue cat <