X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/9fa7dc2498bbb762e9b1a6d22a48f1f9e4c1ef17..21e17d6ad463edff7baf6e25a30041dcf22a8c4e:/package/busybox/config/networking/Config.in diff --git a/package/busybox/config/networking/Config.in b/package/busybox/config/networking/Config.in index 186e94509..de7484aa9 100644 --- a/package/busybox/config/networking/Config.in +++ b/package/busybox/config/networking/Config.in @@ -12,6 +12,21 @@ config BUSYBOX_CONFIG_FEATURE_IPV6 Enable IPv6 support in busybox. This adds IPv6 support in the networking applets. +config BUSYBOX_CONFIG_FEATURE_PREFER_IPV4_ADDRESS + bool "Preferentially use IPv4 addresses from DNS queries" + default y + depends on BUSYBOX_CONFIG_FEATURE_IPV6 + help + Use IPv4 address of network host if it has one. + + If this option is off, the first returned address will be used. + This may cause problems when your DNS server is IPv6-capable and + is returning IPv6 host addresses too. If IPv6 address + precedes IPv4 one in DNS reply, busybox network applets + (e.g. wget) will use IPv6 address. On an IPv6-incapable host + or network applets will fail to connect to the host + using IPv6 address. + config BUSYBOX_CONFIG_VERBOSE_RESOLUTION_ERRORS bool "Verbose resolution errors" default y @@ -32,6 +47,32 @@ config BUSYBOX_CONFIG_ARPING help Ping hosts by ARP packets. +config BUSYBOX_CONFIG_BRCTL + bool "brctl" + default y + help + Manage ethernet bridges. + Supports addbr/delbr and addif/delif. + +config BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY + bool "Fancy options" + default y + depends on BUSYBOX_CONFIG_BRCTL + help + Add support for extended option like: + setageing, setfd, sethello, setmaxage, + setpathcost, setportprio, setbridgeprio, + stp + This adds about 600 bytes. + +config BUSYBOX_CONFIG_FEATURE_BRCTL_SHOW + bool "Support show, showmac and showstp" + default y + depends on BUSYBOX_CONFIG_BRCTL && BUSYBOX_CONFIG_FEATURE_BRCTL_FANCY + help + Add support for option which prints the current config: + showmacs, showstp, show + config BUSYBOX_CONFIG_DNSD bool "dnsd" default n @@ -94,14 +135,14 @@ config BUSYBOX_CONFIG_FEATURE_HTTPD_RANGES config BUSYBOX_CONFIG_FEATURE_HTTPD_USE_SENDFILE bool "Use sendfile system call" - default y + default n depends on BUSYBOX_CONFIG_HTTPD help When enabled, httpd will use the kernel sendfile() function instead of read/write loop. config BUSYBOX_CONFIG_FEATURE_HTTPD_RELOAD_CONFIG_SIGHUP - bool "Support reloading the global config file using hup signal" + bool "Support reloading of global config file on HUP signal" default y depends on BUSYBOX_CONFIG_HTTPD help @@ -151,7 +192,7 @@ config BUSYBOX_CONFIG_FEATURE_HTTPD_CGI when specific URLs are requested. config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR - bool "Enable support for running scripts through an interpreter" + bool "Support for running scripts through an interpreter" default y depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI help @@ -162,7 +203,7 @@ config BUSYBOX_CONFIG_FEATURE_HTTPD_CONFIG_WITH_SCRIPT_INTERPR *.php:/path/to/your/php config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV - bool "Support the REMOTE_PORT environment variable for CGI" + bool "Set REMOTE_PORT environment variable for CGI" default y depends on BUSYBOX_CONFIG_FEATURE_HTTPD_CGI help @@ -170,17 +211,17 @@ config BUSYBOX_CONFIG_FEATURE_HTTPD_SET_REMOTE_PORT_TO_ENV references that contain a unique port number. config BUSYBOX_CONFIG_FEATURE_HTTPD_ENCODE_URL_STR - bool "Enable the -e option for shell script CGI simplification." + bool "Enable -e option (useful for CGIs written as shell scripts)" default y depends on BUSYBOX_CONFIG_HTTPD help - This option allows html encoding arbitrary - strings for display of the browser. Output goes to stdout. - For example, httpd -e "" as + This option allows html encoding of arbitrary strings for display + by the browser. Output goes to stdout. + For example, httpd -e "" produces "<Hello World>". config BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES - bool "Enable support for custom error pages" + bool "Support for custom error pages" default y depends on BUSYBOX_CONFIG_HTTPD help @@ -193,8 +234,8 @@ config BUSYBOX_CONFIG_FEATURE_HTTPD_ERROR_PAGES message. config BUSYBOX_CONFIG_FEATURE_HTTPD_PROXY - bool "Enable support for reverse proxy" - default n + bool "Support for reverse proxy" + default y depends on BUSYBOX_CONFIG_HTTPD help This option allows you to define URLs that will be forwarded @@ -223,7 +264,7 @@ config BUSYBOX_CONFIG_FEATURE_IFCONFIG_SLIP default n depends on BUSYBOX_CONFIG_IFCONFIG help - Allow "keepalive" and "outfill" support for SLIP. If you're not + Allow "keepalive" and "outfill" support for SLIP. If you're not planning on using serial lines, leave this unchecked. config BUSYBOX_CONFIG_FEATURE_IFCONFIG_MEMSTART_IOADDR_IRQ @@ -240,7 +281,7 @@ config BUSYBOX_CONFIG_FEATURE_IFCONFIG_HW depends on BUSYBOX_CONFIG_IFCONFIG help Set the hardware address of this interface, if the device driver - supports this operation. Currently, we only support the 'ether' + supports this operation. Currently, we only support the 'ether' class. config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS @@ -251,19 +292,26 @@ config BUSYBOX_CONFIG_FEATURE_IFCONFIG_BROADCAST_PLUS Setting this will make ifconfig attempt to find the broadcast automatically if the value '+' is used. +config BUSYBOX_CONFIG_IFENSLAVE + bool "ifenslave" + default n + help + Userspace application to bind several interfaces + to a logical interface (use with kernel bonding driver). + config BUSYBOX_CONFIG_IFUPDOWN bool "ifupdown" default n help - Activate or deactivate the specified interfaces. This applet makes + Activate or deactivate the specified interfaces. This applet makes use of either "ifconfig" and "route" or the "ip" command to actually - configure network interfaces. Therefore, you will probably also want + configure network interfaces. Therefore, you will probably also want to enable either IFCONFIG and ROUTE, or enable - FEATURE_IFUPDOWN_IP and the various IP options. Of + FEATURE_IFUPDOWN_IP and the various IP options. Of course you could use non-busybox versions of these programs, so against my better judgement (since this will surely result in plenty of support questions on the mailing list), I do not force you to - enable these additional options. It is up to you to supply either + enable these additional options. It is up to you to supply either "ifconfig", "route" and "run-parts" or the "ip" command, either via busybox or via standalone utilities. @@ -315,14 +363,14 @@ config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IFCONFIG_BUILTIN work. config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV4 - bool "Enable support for IPv4" + bool "Support for IPv4" default n depends on BUSYBOX_CONFIG_IFUPDOWN help If you want ifup/ifdown to talk IPv4, leave this on. config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6 - bool "Enable support for IPv6" + bool "Support for IPv6" default n depends on BUSYBOX_CONFIG_IFUPDOWN && BUSYBOX_CONFIG_FEATURE_IPV6 help @@ -330,7 +378,7 @@ config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_IPV6 ### UNUSED ###config FEATURE_IFUPDOWN_IPX -### bool "Enable support for IPX" +### bool "Support for IPX" ### default n ### depends on IFUPDOWN ### help @@ -346,7 +394,7 @@ config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_MAPPING a weird network setup you don't need it. config BUSYBOX_CONFIG_FEATURE_IFUPDOWN_EXTERNAL_DHCP - bool "Enable support for external dhcp clients" + bool "Support for external dhcp clients" default n depends on BUSYBOX_CONFIG_IFUPDOWN help @@ -410,7 +458,7 @@ config BUSYBOX_CONFIG_IP default n help The "ip" applet is a TCP/IP interface configuration and routing - utility. You generally don't need "ip" to use busybox with + utility. You generally don't need "ip" to use busybox with TCP/IP. config BUSYBOX_CONFIG_FEATURE_IP_ADDRESS @@ -449,7 +497,7 @@ config BUSYBOX_CONFIG_FEATURE_IP_RULE Add support for rule commands to "ip". config BUSYBOX_CONFIG_FEATURE_IP_SHORT_FORMS - bool "Support short forms of ip commands." + bool "Support short forms of ip commands" default n depends on BUSYBOX_CONFIG_IP help @@ -510,7 +558,8 @@ config BUSYBOX_CONFIG_FEATURE_IPCALC_FANCY default n depends on BUSYBOX_CONFIG_IPCALC help - Adds the options hostname, prefix and silent to the output of "ipcalc". + Adds the options hostname, prefix and silent to the output of + "ipcalc". config BUSYBOX_CONFIG_FEATURE_IPCALC_LONG_OPTIONS bool "Enable long options" @@ -528,19 +577,32 @@ config BUSYBOX_CONFIG_NAMEIF Renamed interfaces MUST be in the down state. It is possible to use a file (default: /etc/mactab) with list of new interface names and MACs. - Maximum interface name length: IF_NAMESIZE = 16 + Maximum interface name length: IFNAMSIZ = 16 File fields are separated by space or tab. File format: # Comment new_interface_name XX:XX:XX:XX:XX:XX +config BUSYBOX_CONFIG_FEATURE_NAMEIF_EXTENDED + bool "Extended nameif" + default n + depends on BUSYBOX_CONFIG_NAMEIF + help + This extends the nameif syntax to support the bus_info and driver + checks. The syntax is compatible to the normal nameif. + File format: + new_interface_name driver=asix bus=usb-0000:00:08.2-3 + new_interface_name bus=usb-0000:00:08.2-3 00:80:C8:38:91:B5 + new_interface_name mac=00:80:C8:38:91:B5 + new_interface_name 00:80:C8:38:91:B5 + config BUSYBOX_CONFIG_NC bool "nc" default y help A simple Unix utility which reads and writes data across network connections. - + config BUSYBOX_CONFIG_NETMSG bool "netmsg" default y @@ -570,13 +632,21 @@ config BUSYBOX_CONFIG_NETSTAT netstat prints information about the Linux networking subsystem. config BUSYBOX_CONFIG_FEATURE_NETSTAT_WIDE - bool " Enable wide netstat output" + bool "Enable wide netstat output" default y depends on BUSYBOX_CONFIG_NETSTAT help Add support for wide columns. Useful when displaying IPv6 addresses (-W option). +config BUSYBOX_CONFIG_FEATURE_NETSTAT_PRG + bool "Enable PID/Program name output" + default y + depends on BUSYBOX_CONFIG_NETSTAT + help + Add support for -p flag to print out PID and program name. + +700 bytes of code. + config BUSYBOX_CONFIG_NSLOOKUP bool "nslookup" default y @@ -597,12 +667,6 @@ config BUSYBOX_CONFIG_PING6 help This will give you a ping that can talk IPv6. -config BUSYBOX_CONFIG_PSCAN - bool "pscan" - default n - help - Simple network port scanner. - config BUSYBOX_CONFIG_FEATURE_FANCY_PING bool "Enable fancy ping output" default y @@ -611,6 +675,12 @@ config BUSYBOX_CONFIG_FEATURE_FANCY_PING Make the output from the ping applet include statistics, and at the same time provide full support for ICMP packets. +config BUSYBOX_CONFIG_PSCAN + bool "pscan" + default n + help + Simple network port scanner. + config BUSYBOX_CONFIG_ROUTE bool "route" default y @@ -621,7 +691,18 @@ config BUSYBOX_CONFIG_SLATTACH bool "slattach" default n help - slattach is a small utility to attach network interfaces to serial lines. + slattach is a small utility to attach network interfaces to serial + lines. + +#config TC +# bool "tc" +# default n +# help +# show / manipulate traffic control settings +# +#config FEATURE_TC_INGRESS +# def_bool n +# depends on TC config BUSYBOX_CONFIG_TELNET bool "telnet" @@ -636,7 +717,7 @@ config BUSYBOX_CONFIG_FEATURE_TELNET_TTYPE depends on BUSYBOX_CONFIG_TELNET help Setting this option will forward the TERM environment variable to the - remote host you are connecting to. This is useful to make sure that + remote host you are connecting to. This is useful to make sure that things like ANSI colors and other control sequences behave. config BUSYBOX_CONFIG_FEATURE_TELNET_AUTOLOGIN @@ -655,9 +736,9 @@ config BUSYBOX_CONFIG_TELNETD select BUSYBOX_CONFIG_FEATURE_SYSLOG help A daemon for the TELNET protocol, allowing you to log onto the host - running the daemon. Please keep in mind that the TELNET protocol - sends passwords in plain text. If you can't afford the space for an - SSH daemon and you trust your network, you may say 'y' here. As a + running the daemon. Please keep in mind that the TELNET protocol + sends passwords in plain text. If you can't afford the space for an + SSH daemon and you trust your network, you may say 'y' here. As a more secure alternative, you should seriously consider installing the very small Dropbear SSH daemon instead: http://matt.ucc.asn.au/dropbear/dropbear.html @@ -683,7 +764,7 @@ config BUSYBOX_CONFIG_TELNETD mount -t devpts devpts /dev/pts You need to be sure that Busybox has LOGIN and - FEATURE_SUID enabled. And finally, you should make + FEATURE_SUID enabled. And finally, you should make certain that Busybox has been installed setuid root: chown root.root /bin/busybox @@ -703,39 +784,52 @@ config BUSYBOX_CONFIG_TFTP bool "tftp" default n help - This enables the Trivial File Transfer Protocol client program. TFTP + This enables the Trivial File Transfer Protocol client program. TFTP is usually used for simple, small transfers such as a root image for a network-enabled bootloader. +config BUSYBOX_CONFIG_TFTPD + bool "tftpd" + default n + help + This enables the Trivial File Transfer Protocol server program. + It expects that stdin is a datagram socket and a packet + is already pending on it. It will exit after one transfer. + In other words: it should be run from inetd in nowait mode, + or from udpsvd. Example: "udpsvd -E 0 69 tftpd DIR" + config BUSYBOX_CONFIG_FEATURE_TFTP_GET bool "Enable \"get\" command" default n - depends on BUSYBOX_CONFIG_TFTP + depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD help - Add support for the GET command within the TFTP client. This allows + Add support for the GET command within the TFTP client. This allows a client to retrieve a file from a TFTP server. + Also enable upload support in tftpd, if tftpd is selected. config BUSYBOX_CONFIG_FEATURE_TFTP_PUT bool "Enable \"put\" command" default n - depends on BUSYBOX_CONFIG_TFTP + depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD help - Add support for the PUT command within the TFTP client. This allows + Add support for the PUT command within the TFTP client. This allows a client to transfer a file to a TFTP server. + Also enable download support in tftpd, if tftpd is selected. config BUSYBOX_CONFIG_FEATURE_TFTP_BLOCKSIZE - bool "Enable \"blocksize\" command" + bool "Enable \"blksize\" protocol option" default n - depends on BUSYBOX_CONFIG_TFTP + depends on BUSYBOX_CONFIG_TFTP || BUSYBOX_CONFIG_TFTPD help - Allow the client to specify the desired block size for transfers. + Allow tftp to specify block size, and tftpd to understand + "blksize" option. -config BUSYBOX_CONFIG_DEBUG_TFTP +config BUSYBOX_CONFIG_TFTP_DEBUG bool "Enable debug" default n depends on BUSYBOX_CONFIG_TFTP help - Enable debug settings for tftp. This is useful if you're running + Enable debug settings for tftp. This is useful if you're running into problems with tftp as the protocol doesn't help you much when you run into problems. @@ -750,7 +844,7 @@ config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_VERBOSE default y depends on BUSYBOX_CONFIG_TRACEROUTE help - Add some verbosity to traceroute. This includes amongst other things + Add some verbosity to traceroute. This includes amongst other things hostnames and ICMP response types. config BUSYBOX_CONFIG_FEATURE_TRACEROUTE_SOURCE_ROUTE @@ -816,4 +910,18 @@ config BUSYBOX_CONFIG_ZCIP See http://www.zeroconf.org for further details, and "zcip.script" in the busybox examples. +config BUSYBOX_CONFIG_TCPSVD + bool "tcpsvd" + default n + help + tcpsvd listens on a TCP port and runs a program for each new + connection. + +config BUSYBOX_CONFIG_UDPSVD + bool "udpsvd" + default n + help + udpsvd listens on an UDP port and runs a program for each new + connection. + endmenu