X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/9fe2a2d5546fe9370eb9c977d0816dc32e31d461..9f59a573f42f781f052e3c32a0df1e05184042b7:/target/linux/generic/patches-2.6.34/975-ssb_update.patch?ds=inline diff --git a/target/linux/generic/patches-2.6.34/975-ssb_update.patch b/target/linux/generic/patches-2.6.34/975-ssb_update.patch index 6525a1030..bfac252f8 100644 --- a/target/linux/generic/patches-2.6.34/975-ssb_update.patch +++ b/target/linux/generic/patches-2.6.34/975-ssb_update.patch @@ -299,7 +299,7 @@ tx_ring_dma + size > DMA_BIT_MASK(30)) { kfree(tx_ring); goto out_err; -@@ -2178,12 +2169,14 @@ static int __devinit b44_init_one(struct +@@ -2176,12 +2167,14 @@ static int __devinit b44_init_one(struct "Failed to powerup the bus\n"); goto err_out_free_dev; } @@ -324,6 +324,16 @@ dma_desc_sync_size = max_t(unsigned int, dma_desc_align_size, sizeof(struct dma_desc)); err = b44_pci_init(); +--- a/drivers/ssb/b43_pci_bridge.c ++++ b/drivers/ssb/b43_pci_bridge.c +@@ -24,6 +24,7 @@ static const struct pci_device_id b43_pc + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4312) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4315) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4318) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BCM_GVC, 0x4318) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) }, --- a/drivers/ssb/driver_chipcommon.c +++ b/drivers/ssb/driver_chipcommon.c @@ -209,6 +209,24 @@ static void chipco_powercontrol_init(str @@ -364,17 +374,7 @@ if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL)) return; -@@ -233,6 +257,9 @@ void ssb_chipcommon_init(struct ssb_chip - { - if (!cc->dev) - return; /* We don't have a ChipCommon */ -+ if (cc->dev->id.revision >= 11) -+ cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT); -+ ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status); - ssb_pmu_init(cc); - chipco_powercontrol_init(cc); - ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); -@@ -370,6 +397,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c +@@ -373,6 +397,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c { return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value); } @@ -395,7 +395,7 @@ u32 pmucap; if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU)) -@@ -516,15 +516,12 @@ void ssb_pmu_init(struct ssb_chipcommon +@@ -516,15 +516,12 @@ void ssb_pmu_init(struct ssb_chipcommon ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n", cc->pmu.rev, pmucap); @@ -419,7 +419,51 @@ } --- a/drivers/ssb/main.c +++ b/drivers/ssb/main.c -@@ -486,11 +486,12 @@ static int ssb_devices_register(struct s +@@ -385,6 +385,35 @@ static int ssb_device_uevent(struct devi + ssb_dev->id.revision); + } + ++#define ssb_config_attr(attrib, field, format_string) \ ++static ssize_t \ ++attrib##_show(struct device *dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ return sprintf(buf, format_string, dev_to_ssb_dev(dev)->field); \ ++} ++ ++ssb_config_attr(core_num, core_index, "%u\n") ++ssb_config_attr(coreid, id.coreid, "0x%04x\n") ++ssb_config_attr(vendor, id.vendor, "0x%04x\n") ++ssb_config_attr(revision, id.revision, "%u\n") ++ssb_config_attr(irq, irq, "%u\n") ++static ssize_t ++name_show(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ return sprintf(buf, "%s\n", ++ ssb_core_name(dev_to_ssb_dev(dev)->id.coreid)); ++} ++ ++static struct device_attribute ssb_device_attrs[] = { ++ __ATTR_RO(name), ++ __ATTR_RO(core_num), ++ __ATTR_RO(coreid), ++ __ATTR_RO(vendor), ++ __ATTR_RO(revision), ++ __ATTR_RO(irq), ++ __ATTR_NULL, ++}; ++ + static struct bus_type ssb_bustype = { + .name = "ssb", + .match = ssb_bus_match, +@@ -394,6 +423,7 @@ static struct bus_type ssb_bustype = { + .suspend = ssb_device_suspend, + .resume = ssb_device_resume, + .uevent = ssb_device_uevent, ++ .dev_attrs = ssb_device_attrs, + }; + + static void ssb_buses_lock(void) +@@ -486,6 +516,7 @@ static int ssb_devices_register(struct s #ifdef CONFIG_SSB_PCIHOST sdev->irq = bus->host_pci->irq; dev->parent = &bus->host_pci->dev; @@ -427,13 +471,7 @@ #endif break; case SSB_BUSTYPE_PCMCIA: - #ifdef CONFIG_SSB_PCMCIAHOST -- sdev->irq = bus->host_pcmcia->irq.AssignedIRQ; -+ sdev->irq = bus->host_pcmcia->irq; - dev->parent = &bus->host_pcmcia->dev; - #endif - break; -@@ -501,6 +502,7 @@ static int ssb_devices_register(struct s +@@ -501,6 +532,7 @@ static int ssb_devices_register(struct s break; case SSB_BUSTYPE_SSB: dev->dma_mask = &dev->coherent_dma_mask; @@ -441,7 +479,7 @@ break; } -@@ -834,6 +836,9 @@ int ssb_bus_pcibus_register(struct ssb_b +@@ -834,6 +866,9 @@ int ssb_bus_pcibus_register(struct ssb_b if (!err) { ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " "PCI device %s\n", dev_name(&host_pci->dev)); @@ -451,7 +489,78 @@ } return err; -@@ -1223,80 +1228,6 @@ u32 ssb_dma_translation(struct ssb_devic +@@ -1159,10 +1194,10 @@ void ssb_device_enable(struct ssb_device + } + EXPORT_SYMBOL(ssb_device_enable); + +-/* Wait for a bit in a register to get set or unset. ++/* Wait for bitmask in a register to get set or cleared. + * timeout is in units of ten-microseconds */ +-static int ssb_wait_bit(struct ssb_device *dev, u16 reg, u32 bitmask, +- int timeout, int set) ++static int ssb_wait_bits(struct ssb_device *dev, u16 reg, u32 bitmask, ++ int timeout, int set) + { + int i; + u32 val; +@@ -1170,7 +1205,7 @@ static int ssb_wait_bit(struct ssb_devic + for (i = 0; i < timeout; i++) { + val = ssb_read32(dev, reg); + if (set) { +- if (val & bitmask) ++ if ((val & bitmask) == bitmask) + return 0; + } else { + if (!(val & bitmask)) +@@ -1187,20 +1222,38 @@ static int ssb_wait_bit(struct ssb_devic + + void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags) + { +- u32 reject; ++ u32 reject, val; + + if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET) + return; + + reject = ssb_tmslow_reject_bitmask(dev); +- ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK); +- ssb_wait_bit(dev, SSB_TMSLOW, reject, 1000, 1); +- ssb_wait_bit(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0); +- ssb_write32(dev, SSB_TMSLOW, +- SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | +- reject | SSB_TMSLOW_RESET | +- core_specific_flags); +- ssb_flush_tmslow(dev); ++ ++ if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_CLOCK) { ++ ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK); ++ ssb_wait_bits(dev, SSB_TMSLOW, reject, 1000, 1); ++ ssb_wait_bits(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0); ++ ++ if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) { ++ val = ssb_read32(dev, SSB_IMSTATE); ++ val |= SSB_IMSTATE_REJECT; ++ ssb_write32(dev, SSB_IMSTATE, val); ++ ssb_wait_bits(dev, SSB_IMSTATE, SSB_IMSTATE_BUSY, 1000, ++ 0); ++ } ++ ++ ssb_write32(dev, SSB_TMSLOW, ++ SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | ++ reject | SSB_TMSLOW_RESET | ++ core_specific_flags); ++ ssb_flush_tmslow(dev); ++ ++ if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) { ++ val = ssb_read32(dev, SSB_IMSTATE); ++ val &= ~SSB_IMSTATE_REJECT; ++ ssb_write32(dev, SSB_IMSTATE, val); ++ } ++ } + + ssb_write32(dev, SSB_TMSLOW, + reject | SSB_TMSLOW_RESET | +@@ -1223,80 +1276,6 @@ u32 ssb_dma_translation(struct ssb_devic } EXPORT_SYMBOL(ssb_dma_translation); @@ -538,82 +647,275 @@ } /* Get the word-offset for a SSB_SPROM_XXX define. */ --#define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16)) +-#define SPOFF(offset) (((offset) - SSB_SPROM_BASE1) / sizeof(u16)) +#define SPOFF(offset) ((offset) / sizeof(u16)) /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */ #define SPEX16(_outvar, _offset, _mask, _shift) \ out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift)) -@@ -254,7 +254,7 @@ static int sprom_do_read(struct ssb_bus +@@ -406,6 +406,46 @@ static void sprom_extract_r123(struct ss + out->antenna_gain.ghz5.a3 = gain; + } + ++/* Revs 4 5 and 8 have partially shared layout */ ++static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in) ++{ ++ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, ++ SSB_SPROM4_TXPID2G0, SSB_SPROM4_TXPID2G0_SHIFT); ++ SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01, ++ SSB_SPROM4_TXPID2G1, SSB_SPROM4_TXPID2G1_SHIFT); ++ SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23, ++ SSB_SPROM4_TXPID2G2, SSB_SPROM4_TXPID2G2_SHIFT); ++ SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23, ++ SSB_SPROM4_TXPID2G3, SSB_SPROM4_TXPID2G3_SHIFT); ++ ++ SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01, ++ SSB_SPROM4_TXPID5GL0, SSB_SPROM4_TXPID5GL0_SHIFT); ++ SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01, ++ SSB_SPROM4_TXPID5GL1, SSB_SPROM4_TXPID5GL1_SHIFT); ++ SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23, ++ SSB_SPROM4_TXPID5GL2, SSB_SPROM4_TXPID5GL2_SHIFT); ++ SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23, ++ SSB_SPROM4_TXPID5GL3, SSB_SPROM4_TXPID5GL3_SHIFT); ++ ++ SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01, ++ SSB_SPROM4_TXPID5G0, SSB_SPROM4_TXPID5G0_SHIFT); ++ SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01, ++ SSB_SPROM4_TXPID5G1, SSB_SPROM4_TXPID5G1_SHIFT); ++ SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23, ++ SSB_SPROM4_TXPID5G2, SSB_SPROM4_TXPID5G2_SHIFT); ++ SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23, ++ SSB_SPROM4_TXPID5G3, SSB_SPROM4_TXPID5G3_SHIFT); ++ ++ SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01, ++ SSB_SPROM4_TXPID5GH0, SSB_SPROM4_TXPID5GH0_SHIFT); ++ SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01, ++ SSB_SPROM4_TXPID5GH1, SSB_SPROM4_TXPID5GH1_SHIFT); ++ SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23, ++ SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT); ++ SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, ++ SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT); ++} ++ + static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in) + { int i; +@@ -428,10 +468,14 @@ static void sprom_extract_r45(struct ssb + SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0); + SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0); ++ SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0); ++ SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0); + } else { + SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0); + SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0); ++ SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0); ++ SPEX(boardflags2_hi, SSB_SPROM5_BFL2HI, 0xFFFF, 0); + } + SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A, + SSB_SPROM4_ANTAVAIL_A_SHIFT); +@@ -471,6 +515,8 @@ static void sprom_extract_r45(struct ssb + memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, + sizeof(out->antenna_gain.ghz5)); - for (i = 0; i < bus->sprom_size; i++) -- sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2)); -+ sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2)); ++ sprom_extract_r458(out, in); ++ + /* TODO - get remaining rev 4 stuff needed */ + } + +@@ -561,6 +607,8 @@ static void sprom_extract_r8(struct ssb_ + memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, + sizeof(out->antenna_gain.ghz5)); - return 0; ++ sprom_extract_r458(out, in); ++ + /* TODO - get remaining rev 8 stuff needed */ } -@@ -285,7 +285,7 @@ static int sprom_do_write(struct ssb_bus - ssb_printk("75%%"); - else if (i % 2) - ssb_printk("."); -- writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2)); -+ writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2)); - mmiowb(); - msleep(20); - } -@@ -621,6 +621,28 @@ static int ssb_pci_sprom_get(struct ssb_ - int err = -ENOMEM; - u16 *buf; -+ if (!ssb_is_sprom_available(bus)) { -+ ssb_printk(KERN_ERR PFX "No SPROM available!\n"); -+ return -ENODEV; -+ } -+ if (bus->chipco.dev) { /* can be unavailible! */ -+ /* -+ * get SPROM offset: SSB_SPROM_BASE1 except for -+ * chipcommon rev >= 31 or chip ID is 0x4312 and -+ * chipcommon status & 3 == 2 -+ */ -+ if (bus->chipco.dev->id.revision >= 31) -+ bus->sprom_offset = SSB_SPROM_BASE31; -+ else if (bus->chip_id == 0x4312 && -+ (bus->chipco.status & 0x03) == 2) -+ bus->sprom_offset = SSB_SPROM_BASE31; -+ else -+ bus->sprom_offset = SSB_SPROM_BASE1; -+ } else { -+ bus->sprom_offset = SSB_SPROM_BASE1; +@@ -573,37 +621,34 @@ static int sprom_extract(struct ssb_bus + ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision); + memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */ + memset(out->et1mac, 0xFF, 6); ++ + if ((bus->chip_id & 0xFF00) == 0x4400) { + /* Workaround: The BCM44XX chip has a stupid revision + * number stored in the SPROM. + * Always extract r1. */ + out->revision = 1; ++ ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision); + } -+ ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset); + ++ switch (out->revision) { ++ case 1: ++ case 2: ++ case 3: + sprom_extract_r123(out, in); +- } else if (bus->chip_id == 0x4321) { +- /* the BCM4328 has a chipid == 0x4321 and a rev 4 SPROM */ +- out->revision = 4; ++ break; ++ case 4: ++ case 5: + sprom_extract_r45(out, in); +- } else { +- switch (out->revision) { +- case 1: +- case 2: +- case 3: +- sprom_extract_r123(out, in); +- break; +- case 4: +- case 5: +- sprom_extract_r45(out, in); +- break; +- case 8: +- sprom_extract_r8(out, in); +- break; +- default: +- ssb_printk(KERN_WARNING PFX "Unsupported SPROM" +- " revision %d detected. Will extract" +- " v1\n", out->revision); +- out->revision = 1; +- sprom_extract_r123(out, in); +- } ++ break; ++ case 8: ++ sprom_extract_r8(out, in); ++ break; ++ default: ++ ssb_printk(KERN_WARNING PFX "Unsupported SPROM" ++ " revision %d detected. Will extract" ++ " v1\n", out->revision); ++ out->revision = 1; ++ sprom_extract_r123(out, in); + } + + if (out->boardflags_lo == 0xFFFF) +@@ -618,7 +663,7 @@ static int ssb_pci_sprom_get(struct ssb_ + struct ssb_sprom *sprom) + { + const struct ssb_sprom *fallback; +- int err = -ENOMEM; ++ int err; + u16 *buf; + + if (!ssb_is_sprom_available(bus)) { +@@ -645,7 +690,7 @@ static int ssb_pci_sprom_get(struct ssb_ + buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); if (!buf) - goto out; ---- a/drivers/ssb/sprom.c -+++ b/drivers/ssb/sprom.c -@@ -176,3 +176,18 @@ const struct ssb_sprom *ssb_get_fallback - { - return fallback_sprom; +- goto out; ++ return -ENOMEM; + bus->sprom_size = SSB_SPROMSIZE_WORDS_R123; + sprom_do_read(bus, buf); + err = sprom_check_crc(buf, bus->sprom_size); +@@ -655,7 +700,7 @@ static int ssb_pci_sprom_get(struct ssb_ + buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), + GFP_KERNEL); + if (!buf) +- goto out; ++ return -ENOMEM; + bus->sprom_size = SSB_SPROMSIZE_WORDS_R4; + sprom_do_read(bus, buf); + err = sprom_check_crc(buf, bus->sprom_size); +@@ -677,7 +722,6 @@ static int ssb_pci_sprom_get(struct ssb_ + + out_free: + kfree(buf); +-out: + return err; } + +--- a/drivers/ssb/pcihost_wrapper.c ++++ b/drivers/ssb/pcihost_wrapper.c +@@ -59,6 +59,7 @@ static int ssb_pcihost_probe(struct pci_ + struct ssb_bus *ssb; + int err = -ENOMEM; + const char *name; ++ u32 val; + + ssb = kzalloc(sizeof(*ssb), GFP_KERNEL); + if (!ssb) +@@ -74,6 +75,12 @@ static int ssb_pcihost_probe(struct pci_ + goto err_pci_disable; + pci_set_master(dev); + ++ /* Disable the RETRY_TIMEOUT register (0x41) to keep ++ * PCI Tx retries from interfering with C3 CPU state */ ++ pci_read_config_dword(dev, 0x40, &val); ++ if ((val & 0x0000ff00) != 0) ++ pci_write_config_dword(dev, 0x40, val & 0xffff00ff); + -+/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */ -+bool ssb_is_sprom_available(struct ssb_bus *bus) -+{ -+ /* status register only exists on chipcomon rev >= 11 and we need check -+ for >= 31 only */ -+ /* this routine differs from specs as we do not access SPROM directly -+ on PCMCIA */ -+ if (bus->bustype == SSB_BUSTYPE_PCI && -+ bus->chipco.dev && /* can be unavailible! */ -+ bus->chipco.dev->id.revision >= 31) -+ return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM; -+ -+ return true; -+} + err = ssb_bus_pcibus_register(ssb, dev); + if (err) + goto err_pci_release_regions; +--- a/drivers/ssb/pcmcia.c ++++ b/drivers/ssb/pcmcia.c +@@ -745,7 +745,7 @@ int ssb_pcmcia_get_invariants(struct ssb + + /* Fetch the vendor specific tuples. */ + res = pcmcia_loop_tuple(bus->host_pcmcia, SSB_PCMCIA_CIS, +- ssb_pcmcia_do_get_invariants, sprom); ++ ssb_pcmcia_do_get_invariants, iv); + if ((res == 0) || (res == -ENOSPC)) + return 0; + +--- a/drivers/ssb/scan.c ++++ b/drivers/ssb/scan.c +@@ -407,10 +407,10 @@ int ssb_bus_scan(struct ssb_bus *bus, + /* Ignore PCI cores on PCI-E cards. + * Ignore PCI-E cores on PCI cards. */ + if (dev->id.coreid == SSB_DEV_PCI) { +- if (bus->host_pci->is_pcie) ++ if (pci_is_pcie(bus->host_pci)) + continue; + } else { +- if (!bus->host_pci->is_pcie) ++ if (!pci_is_pcie(bus->host_pci)) + continue; + } + } +@@ -422,6 +422,16 @@ int ssb_bus_scan(struct ssb_bus *bus, + bus->pcicore.dev = dev; + #endif /* CONFIG_SSB_DRIVER_PCICORE */ + break; ++ case SSB_DEV_ETHERNET: ++ if (bus->bustype == SSB_BUSTYPE_PCI) { ++ if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM && ++ (bus->host_pci->device & 0xFF00) == 0x4300) { ++ /* This is a dangling ethernet core on a ++ * wireless device. Ignore it. */ ++ continue; ++ } ++ } ++ break; + default: + break; + } +--- a/include/linux/pci_ids.h ++++ b/include/linux/pci_ids.h +@@ -2038,6 +2038,7 @@ + #define PCI_DEVICE_ID_AFAVLAB_P030 0x2182 + #define PCI_SUBDEVICE_ID_AFAVLAB_P061 0x2150 + ++#define PCI_VENDOR_ID_BCM_GVC 0x14a4 + #define PCI_VENDOR_ID_BROADCOM 0x14e4 + #define PCI_DEVICE_ID_TIGON3_5752 0x1600 + #define PCI_DEVICE_ID_TIGON3_5752M 0x1601 --- a/include/linux/ssb/ssb.h +++ b/include/linux/ssb/ssb.h -@@ -167,7 +167,7 @@ struct ssb_device { +@@ -55,6 +55,10 @@ struct ssb_sprom { + u8 tri5gl; /* 5.2GHz TX isolation */ + u8 tri5g; /* 5.3GHz TX isolation */ + u8 tri5gh; /* 5.8GHz TX isolation */ ++ u8 txpid2g[4]; /* 2GHz TX power index */ ++ u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */ ++ u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */ ++ u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */ + u8 rxpo2g; /* 2GHz RX power offset */ + u8 rxpo5g; /* 5GHz RX power offset */ + u8 rssisav2g; /* 2GHz RSSI params */ +@@ -167,7 +171,7 @@ struct ssb_device { * is an optimization. */ const struct ssb_bus_ops *ops; @@ -622,25 +924,7 @@ struct ssb_bus *bus; struct ssb_device_id id; -@@ -305,6 +305,7 @@ struct ssb_bus { - /* ID information about the Chip. */ - u16 chip_id; - u16 chip_rev; -+ u16 sprom_offset; - u16 sprom_size; /* number of words in sprom */ - u8 chip_package; - -@@ -394,6 +395,9 @@ extern int ssb_bus_sdiobus_register(stru - - extern void ssb_bus_unregister(struct ssb_bus *bus); - -+/* Does the device have an SPROM? */ -+extern bool ssb_is_sprom_available(struct ssb_bus *bus); -+ - /* Set a fallback SPROM. - * See kdoc at the function definition for complete documentation. */ - extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom); -@@ -466,14 +470,6 @@ extern u32 ssb_dma_translation(struct ss +@@ -470,14 +474,6 @@ extern u32 ssb_dma_translation(struct ss #define SSB_DMA_TRANSLATION_MASK 0xC0000000 #define SSB_DMA_TRANSLATION_SHIFT 30 @@ -655,7 +939,7 @@ static inline void __cold __ssb_dma_not_implemented(struct ssb_device *dev) { #ifdef CONFIG_SSB_DEBUG -@@ -482,155 +478,6 @@ static inline void __cold __ssb_dma_not_ +@@ -486,155 +482,6 @@ static inline void __cold __ssb_dma_not_ #endif /* DEBUG */ } @@ -811,61 +1095,22 @@ #ifdef CONFIG_SSB_PCIHOST /* PCI-host wrapper driver */ extern int ssb_pcihost_register(struct pci_driver *driver); ---- a/include/linux/ssb/ssb_driver_chipcommon.h -+++ b/include/linux/ssb/ssb_driver_chipcommon.h -@@ -53,6 +53,7 @@ - #define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */ - #define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */ - #define SSB_CHIPCO_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */ -+#define SSB_CHIPCO_CAP_SPROM 0x40000000 /* SPROM present */ - #define SSB_CHIPCO_CORECTL 0x0008 - #define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ - #define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ -@@ -385,6 +386,7 @@ - - - /** Chip specific Chip-Status register contents. */ -+#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS 0x00000040 /* SPROM present */ - #define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003 - #define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */ - #define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */ -@@ -398,6 +400,18 @@ - #define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4 - #define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */ - -+/** Macros to determine SPROM presence based on Chip-Status register. */ -+#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \ -+ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ -+ SSB_CHIPCO_CHST_4325_OTP_SEL) -+#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \ -+ (status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS) -+#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \ -+ (((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ -+ SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \ -+ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ -+ SSB_CHIPCO_CHST_4325_OTP_SEL)) -+ - - - /** Clockcontrol masks and values **/ -@@ -564,6 +578,7 @@ struct ssb_chipcommon_pmu { - struct ssb_chipcommon { - struct ssb_device *dev; - u32 capabilities; -+ u32 status; - /* Fast Powerup Delay constant */ - u16 fast_pwrup_delay; - struct ssb_chipcommon_pmu pmu; --- a/include/linux/ssb/ssb_regs.h +++ b/include/linux/ssb/ssb_regs.h -@@ -170,26 +170,27 @@ - #define SSB_SPROMSIZE_WORDS_R4 220 - #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16)) +@@ -85,6 +85,8 @@ + #define SSB_IMSTATE_AP_RSV 0x00000030 /* Reserved */ + #define SSB_IMSTATE_IBE 0x00020000 /* In Band Error */ + #define SSB_IMSTATE_TO 0x00040000 /* Timeout */ ++#define SSB_IMSTATE_BUSY 0x01800000 /* Busy (Backplane rev >= 2.3 only) */ ++#define SSB_IMSTATE_REJECT 0x02000000 /* Reject (Backplane rev >= 2.3 only) */ + #define SSB_INTVEC 0x0F94 /* SB Interrupt Mask */ + #define SSB_INTVEC_PCI 0x00000001 /* Enable interrupts for PCI */ + #define SSB_INTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */ +@@ -172,25 +174,25 @@ #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16)) --#define SSB_SPROM_BASE 0x1000 + #define SSB_SPROM_BASE1 0x1000 + #define SSB_SPROM_BASE31 0x0800 -#define SSB_SPROM_REVISION 0x107E -+#define SSB_SPROM_BASE1 0x1000 -+#define SSB_SPROM_BASE31 0x0800 +#define SSB_SPROM_REVISION 0x007E #define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */ #define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */ @@ -896,7 +1141,7 @@ #define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */ #define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */ #define SSB_SPROM1_BINF_CCODE_SHIFT 8 -@@ -197,63 +198,63 @@ +@@ -198,63 +200,63 @@ #define SSB_SPROM1_BINF_ANTBG_SHIFT 12 #define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */ #define SSB_SPROM1_BINF_ANTA_SHIFT 14 @@ -988,7 +1233,7 @@ #define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */ #define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */ #define SSB_SPROM3_CCKPO_2M_SHIFT 4 -@@ -264,100 +265,100 @@ +@@ -265,100 +267,144 @@ #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ /* SPROM Revision 4 */ @@ -996,6 +1241,8 @@ -#define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */ +#define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */ +#define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */ ++#define SSB_SPROM4_BFL2LO 0x0048 /* Board flags 2 (low 16 bits) */ ++#define SSB_SPROM4_BFL2HI 0x004A /* Board flags 2 Hi */ +#define SSB_SPROM4_IL0MAC 0x004C /* 6 byte MAC address for a/b/g/n */ +#define SSB_SPROM4_CCODE 0x0052 /* Country Code (2 bytes) */ +#define SSB_SPROM4_GPIOA 0x0056 /* Gen. Purpose IO # 0 and 1 */ @@ -1038,6 +1285,46 @@ #define SSB_SPROM4_AGAIN3_SHIFT 8 -#define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */ -#define SSB_SPROM4_MAXP_BG 0x1080 /* Max Power BG in path 1 */ ++#define SSB_SPROM4_TXPID2G01 0x0062 /* TX Power Index 2GHz */ ++#define SSB_SPROM4_TXPID2G0 0x00FF ++#define SSB_SPROM4_TXPID2G0_SHIFT 0 ++#define SSB_SPROM4_TXPID2G1 0xFF00 ++#define SSB_SPROM4_TXPID2G1_SHIFT 8 ++#define SSB_SPROM4_TXPID2G23 0x0064 /* TX Power Index 2GHz */ ++#define SSB_SPROM4_TXPID2G2 0x00FF ++#define SSB_SPROM4_TXPID2G2_SHIFT 0 ++#define SSB_SPROM4_TXPID2G3 0xFF00 ++#define SSB_SPROM4_TXPID2G3_SHIFT 8 ++#define SSB_SPROM4_TXPID5G01 0x0066 /* TX Power Index 5GHz middle subband */ ++#define SSB_SPROM4_TXPID5G0 0x00FF ++#define SSB_SPROM4_TXPID5G0_SHIFT 0 ++#define SSB_SPROM4_TXPID5G1 0xFF00 ++#define SSB_SPROM4_TXPID5G1_SHIFT 8 ++#define SSB_SPROM4_TXPID5G23 0x0068 /* TX Power Index 5GHz middle subband */ ++#define SSB_SPROM4_TXPID5G2 0x00FF ++#define SSB_SPROM4_TXPID5G2_SHIFT 0 ++#define SSB_SPROM4_TXPID5G3 0xFF00 ++#define SSB_SPROM4_TXPID5G3_SHIFT 8 ++#define SSB_SPROM4_TXPID5GL01 0x006A /* TX Power Index 5GHz low subband */ ++#define SSB_SPROM4_TXPID5GL0 0x00FF ++#define SSB_SPROM4_TXPID5GL0_SHIFT 0 ++#define SSB_SPROM4_TXPID5GL1 0xFF00 ++#define SSB_SPROM4_TXPID5GL1_SHIFT 8 ++#define SSB_SPROM4_TXPID5GL23 0x006C /* TX Power Index 5GHz low subband */ ++#define SSB_SPROM4_TXPID5GL2 0x00FF ++#define SSB_SPROM4_TXPID5GL2_SHIFT 0 ++#define SSB_SPROM4_TXPID5GL3 0xFF00 ++#define SSB_SPROM4_TXPID5GL3_SHIFT 8 ++#define SSB_SPROM4_TXPID5GH01 0x006E /* TX Power Index 5GHz high subband */ ++#define SSB_SPROM4_TXPID5GH0 0x00FF ++#define SSB_SPROM4_TXPID5GH0_SHIFT 0 ++#define SSB_SPROM4_TXPID5GH1 0xFF00 ++#define SSB_SPROM4_TXPID5GH1_SHIFT 8 ++#define SSB_SPROM4_TXPID5GH23 0x0070 /* TX Power Index 5GHz high subband */ ++#define SSB_SPROM4_TXPID5GH2 0x00FF ++#define SSB_SPROM4_TXPID5GH2_SHIFT 0 ++#define SSB_SPROM4_TXPID5GH3 0xFF00 ++#define SSB_SPROM4_TXPID5GH3_SHIFT 8 +#define SSB_SPROM4_MAXP_BG 0x0080 /* Max Power BG in path 1 */ #define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */ #define SSB_SPROM4_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ @@ -1077,6 +1364,8 @@ +#define SSB_SPROM5_CCODE 0x0044 /* Country Code (2 bytes) */ +#define SSB_SPROM5_BFLLO 0x004A /* Boardflags (low 16 bits) */ +#define SSB_SPROM5_BFLHI 0x004C /* Board Flags Hi */ ++#define SSB_SPROM5_BFL2LO 0x004E /* Board flags 2 (low 16 bits) */ ++#define SSB_SPROM5_BFL2HI 0x0050 /* Board flags 2 Hi */ +#define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */ +#define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */ #define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */ @@ -1146,7 +1435,7 @@ #define SSB_SPROM8_RSSISMF2G 0x000F #define SSB_SPROM8_RSSISMC2G 0x00F0 #define SSB_SPROM8_RSSISMC2G_SHIFT 4 -@@ -365,7 +366,7 @@ +@@ -366,7 +412,7 @@ #define SSB_SPROM8_RSSISAV2G_SHIFT 8 #define SSB_SPROM8_BXA2G 0x1800 #define SSB_SPROM8_BXA2G_SHIFT 11 @@ -1155,7 +1444,7 @@ #define SSB_SPROM8_RSSISMF5G 0x000F #define SSB_SPROM8_RSSISMC5G 0x00F0 #define SSB_SPROM8_RSSISMC5G_SHIFT 4 -@@ -373,47 +374,47 @@ +@@ -374,47 +420,47 @@ #define SSB_SPROM8_RSSISAV5G_SHIFT 8 #define SSB_SPROM8_BXA5G 0x1800 #define SSB_SPROM8_BXA5G_SHIFT 11