X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/a0f4e5c8deb63826fe6658170612fa1354a7756a..bc46e3f21c94305023d63d58daca55a06ec3bbd9:/target/linux/ramips/base-files/etc/uci-defaults/network?ds=sidebyside

diff --git a/target/linux/ramips/base-files/etc/uci-defaults/network b/target/linux/ramips/base-files/etc/uci-defaults/network
index 7cb6b833a..77b65cb3a 100755
--- a/target/linux/ramips/base-files/etc/uci-defaults/network
+++ b/target/linux/ramips/base-files/etc/uci-defaults/network
@@ -9,39 +9,6 @@ if [ ! -x /usr/sbin/maccalc ]; then
 	return
 fi
 
-get_mac_binary()
-{
-	local mtdname="$1"
-	local seek="$2"
-	local part
-
-	part=$(find_mtd_part "$mtdname")
-	if [ -z "$part" ]; then
-		echo "get_mac_binary: partition $mtdname not found!" >&2
-		return
-	fi
-
-	dd bs=1 skip=$seek count=6 if=$part 2>/dev/null | /usr/sbin/maccalc bin2mac
-}
-
-get_mac_nvram()
-{
-	local mtdname="$1"
-	local key="$2"
-	local part
-	local mac_dirty
-
-	part=$(find_mtd_part "$mtdname")
-	if [ -z "$part" ]; then
-		echo "get_mac_nvram: partition $mtdname not found!" >&2
-		return
-	fi
-
-	mac_dirty=$(strings "$part" | sed -n 's/'"$key"'=//p')
-	# "canonicalize" mac
-	maccalc add "$mac_dirty" 0
-}
-
 ramips_setup_interfaces()
 {
 	local board="$1"
@@ -49,17 +16,58 @@ ramips_setup_interfaces()
 	ucidef_set_interface_loopback
 
 	case $board in
+	all0256n)
+		ucidef_set_interface_lan "eth0.1"
+		;;
+
 	argus-atp52b | \
 	b2c | \
+	nw718 | \
+	sl-r7205 | \
+	w502u | \
+	wr6202)
+		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		;;
+
+	f5d8235-v1 | \
 	f5d8235-v2 | \
-	nw718)
-		ucidef_set_interfaces_lan_wan "eth0.1 eth0.2"
+	v11st-fe)
+		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		ucidef_add_switch "switch0" "1" "1"
+		ucidef_add_switch_vlan "switch0" "1" "1 2 3 4 5t"
+		ucidef_add_switch_vlan "switch0" "2" "0 5t"
+		;;
+
+	rt-n15 | \
+	wl-351)
+		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		ucidef_add_switch "switch0" "1" "1"
+		ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 5t"
+		ucidef_add_switch_vlan "switch0" "2" "4 5t"
+		;;
+
+	rt-n56u)
+		ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		ucidef_add_switch "switch0" "1" "1"
+		ucidef_add_switch_vlan "switch0" "1" "0 1 2 3 8t"
+		ucidef_add_switch_vlan "switch0" "2" "4 8t"
+		;;
+
+	wcr-150gn)
+		ucidef_set_interface_lan_wan "eth0.2" "eth0.1"
+		;;
+
+	wli-tx4-ag300n)
+		ucidef_set_interface_lan "eth0"
 		;;
 
 	*)
 		RT3X5X=`cat /proc/cpuinfo | grep RT3.5`
-		[ -z "${RT3X5X}" ] || \
-			ucidef_set_interfaces_lan_wan "eth0.1 eth0.2"
+		if [ -n "${RT3X5X}" ]; then
+			ucidef_set_interfaces_lan_wan "eth0.1" "eth0.2"
+		else
+			ucidef_set_interfaces_lan_wan "eth0" "eth1"
+		fi
 		;;
 	esac
 }
@@ -71,23 +79,69 @@ ramips_setup_macs()
 	local wan_mac=""
 
 	case $board in
-	f5d8235-v2)
-		lan_mac=$(get_mac_nvram "u-boot" 262148)
-		wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+	all0256n)
+		lan_mac=$(ramips_get_mac_binary factory 40)
 		;;
 
 	argus-atp52b | \
 	b2c | \
-	nw718)
-		lan_mac=$(get_mac_binary factory 4)
+	f5d8235-v1 | \
+	nw718 | \
+	rt-n15 | \
+	sl-r7205 | \
+	wl-351)
+		lan_mac=$(ramips_get_mac_binary factory 4)
 		wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
 		;;
+
+	dir-300-b1 |\
+	dir-300-b2 |\
+	dir-600-b1)
+		lan_mac=$(ramips_get_mac_binary devdata 16388)
+		wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+		;;
+
+	esr-9753 | \
+	nbg-419n | \
+	wcr-150gn)
+                lan_mac=$(ramips_get_mac_binary factory 4)
+                wan_mac=$(ramips_get_mac_binary factory 40)
+		;;
+
+	f5d8235-v2)
+		lan_mac=$(ramips_get_mac_binary "u-boot" 262148)
+		wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+		;;
+
+	rt-n56u)
+		lan_mac=$(ramips_get_mac_binary factory 4)
+		wan_mac=$(ramips_get_mac_binary factory 32772)
+		;;
+
+	w502u)
+                lan_mac=$(ramips_get_mac_binary factory 40)
+                wan_mac=$(ramips_get_mac_binary factory 46)
+		;;
+
+	wl341v3)
+		lan_mac=$(ramips_get_mac_binary board-nvram 65440)
+		wan_mac=$(/usr/sbin/maccalc add "$lan_mac" 1)
+		;;
+
+	wli-tx4-ag300n)
+		lan_mac=$(ramips_get_mac_binary factory 4)
+		;;
+
 	esac
 
-	[ -n $lan_mac ] && ucidef_set_interface_macaddr lan $lan_mac
-	[ -n $wan_mac ] && ucidef_set_interface_macaddr wan $wan_mac
+	[ -n "$lan_mac" ] && ucidef_set_interface_macaddr lan $lan_mac
+	[ -n "$wan_mac" ] && ucidef_set_interface_macaddr wan $wan_mac
 }
 
+[ -e /etc/config/network ] && exit 0
+
+touch /etc/config/network
+
 board=$(ramips_board_name)
 
 ramips_setup_interfaces $board