X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/a533c528599e2d75536320755e0a4dca126087c5..acd42a61cfdf83d6354f3a90cce4068f6567ae17:/package/busybox/config/util-linux/Config.in

diff --git a/package/busybox/config/util-linux/Config.in b/package/busybox/config/util-linux/Config.in
index af4735857..5c5af20e5 100644
--- a/package/busybox/config/util-linux/Config.in
+++ b/package/busybox/config/util-linux/Config.in
@@ -5,7 +5,6 @@
 
 menu "Linux System Utilities"
 
-
 config BUSYBOX_CONFIG_DMESG
 	bool "dmesg"
 	default y
@@ -18,6 +17,26 @@ config BUSYBOX_CONFIG_DMESG
 	  are also logged to the system console.  Enable this option if you
 	  wish to enable the 'dmesg' utility.
 
+config BUSYBOX_CONFIG_FEATURE_DMESG_PRETTY
+	bool "Pretty dmesg output"
+	default y
+	depends on BUSYBOX_CONFIG_DMESG
+	help
+	  If you wish to scrub the syslog level from the output, say 'Y' here.
+	  The syslog level is a string prefixed to every line with the form "<#>".
+
+	  With this option you will see:
+	    # dmesg
+	    Linux version 2.6.17.4 .....
+	    BIOS-provided physical RAM map:
+	     BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
+
+	  Without this option you will see:
+	    # dmesg
+	    <5>Linux version 2.6.17.4 .....
+	    <6>BIOS-provided physical RAM map:
+	    <6> BIOS-e820: 0000000000000000 - 000000000009f000 (usable)
+
 config BUSYBOX_CONFIG_FBSET
 	bool "fbset"
 	default n
@@ -27,9 +46,8 @@ config BUSYBOX_CONFIG_FBSET
 	  interface to access a graphics display.  Enable this option
 	  if you wish to enable the 'fbset' utility.
 
-
 config BUSYBOX_CONFIG_FEATURE_FBSET_FANCY
-	bool "  Turn on extra fbset options"
+	bool "Turn on extra fbset options"
 	default n
 	depends on BUSYBOX_CONFIG_FBSET
 	help
@@ -39,7 +57,7 @@ config BUSYBOX_CONFIG_FEATURE_FBSET_FANCY
 	  options.
 
 config BUSYBOX_CONFIG_FEATURE_FBSET_READMODE
-	bool "  Turn on fbset readmode support"
+	bool "Turn on fbset readmode support"
 	default n
 	depends on BUSYBOX_CONFIG_FBSET
 	help
@@ -74,15 +92,15 @@ config BUSYBOX_CONFIG_FDISK
 	  can be used to list and edit the set of partitions or BSD style
 	  'disk slices' that are defined on a hard drive.
 
-config BUSYBOX_FDISK_SUPPORT_LARGE_DISKS
-	bool
+config BUSYBOX_CONFIG_FDISK_SUPPORT_LARGE_DISKS
+	bool "Support over 4GB disks"
 	default y
 	depends on BUSYBOX_CONFIG_FDISK
 	help
 	  Enable this option to support large disks > 4GB.
 
 config BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
-	bool "  Write support"
+	bool "Write support"
 	default n
 	depends on BUSYBOX_CONFIG_FDISK
 	help
@@ -91,7 +109,7 @@ config BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 	  disabled, you will only be able to view the partition table.
 
 config BUSYBOX_CONFIG_FEATURE_AIX_LABEL
-	bool "  Support AIX disklabels"
+	bool "Support AIX disklabels"
 	default n
 	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 	help
@@ -99,7 +117,7 @@ config BUSYBOX_CONFIG_FEATURE_AIX_LABEL
 	  Most people can safely leave this option disabled.
 
 config BUSYBOX_CONFIG_FEATURE_SGI_LABEL
-	bool "  Support SGI disklabels"
+	bool "Support SGI disklabels"
 	default n
 	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 	help
@@ -107,15 +125,15 @@ config BUSYBOX_CONFIG_FEATURE_SGI_LABEL
 	  Most people can safely leave this option disabled.
 
 config BUSYBOX_CONFIG_FEATURE_SUN_LABEL
-	bool "  Support SUN disklabels"
+	bool "Support SUN disklabels"
 	default n
- 	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
+	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 	help
 	  Enabling this option allows you to create or change SUN disklabels.
 	  Most people can safely leave this option disabled.
 
 config BUSYBOX_CONFIG_FEATURE_OSF_LABEL
-	bool "  Support BSD disklabels"
+	bool "Support BSD disklabels"
 	default n
 	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 	help
@@ -123,7 +141,7 @@ config BUSYBOX_CONFIG_FEATURE_OSF_LABEL
 	  and define and edit BSD disk slices.
 
 config BUSYBOX_CONFIG_FEATURE_FDISK_ADVANCED
-	bool "  Support expert mode"
+	bool "Support expert mode"
 	default n
 	depends on BUSYBOX_CONFIG_FDISK && BUSYBOX_CONFIG_FEATURE_FDISK_WRITABLE
 	help
@@ -132,6 +150,17 @@ config BUSYBOX_CONFIG_FEATURE_FDISK_ADVANCED
 	  partition, and similarly evil things.  Unless you have a very good
 	  reason you would be wise to leave this disabled.
 
+config BUSYBOX_CONFIG_FINDFS
+	bool "findfs"
+	default n
+	select BUSYBOX_CONFIG_VOLUMEID
+	help
+	  This is similar to the findfs program that is part of the e2fsprogs
+	  package.  However, the e2fsprogs version only support ext2/3.  This
+	  version supports those in addition to FAT, swap, and ReiserFS.
+	  WARNING:
+	  With all submodules selected, it will add ~8k to busybox.
+
 config BUSYBOX_CONFIG_FREERAMDISK
 	bool "freeramdisk"
 	default n
@@ -163,10 +192,10 @@ config BUSYBOX_CONFIG_MKFS_MINIX
 	  this utility will do the job for you.
 
 comment "Minix filesystem support"
-    depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
+	depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
 
 config BUSYBOX_CONFIG_FEATURE_MINIX2
-	bool "  Support Minix fs v2 (fsck_minix/mkfs_minix)"
+	bool "Support Minix fs v2 (fsck_minix/mkfs_minix)"
 	default n
 	depends on BUSYBOX_CONFIG_FSCK_MINIX || BUSYBOX_CONFIG_MKFS_MINIX
 	help
@@ -192,24 +221,70 @@ config BUSYBOX_CONFIG_HEXDUMP
 	  The hexdump utility is used to display binary data in a readable
 	  way that is comparable to the output from most hex editors.
 
+config BUSYBOX_CONFIG_FEATURE_HEXDUMP_REVERSE
+	bool "Support -R, reverse of 'hexdump -Cv'"
+	default n
+	depends on BUSYBOX_CONFIG_HEXDUMP
+	help
+	  The hexdump utility is used to display binary data in an ascii
+	  readable way. This option creates binary data from an ascii input.
+	  NB: this option is non-standard. It's unwise to use it in scripts
+	  aimed to be portable.
+
+config BUSYBOX_CONFIG_HD
+	bool "hd"
+	default n
+	select BUSYBOX_CONFIG_HEXDUMP
+	help
+	  hd is an alias to hexdump -C.
+
 config BUSYBOX_CONFIG_HWCLOCK
 	bool "hwclock"
-	default n
+	default y
 	help
 	  The hwclock utility is used to read and set the hardware clock
 	  on a system.  This is primarily used to set the current time on
 	  shutdown in the hardware clock, so the hardware will keep the
 	  correct time when Linux is _not_ running.
 
-config BUSYBOX_CONFIG_FEATURE_HWCLOCK_LONGOPTIONS
-	bool "  Support long options (--hctosys,...)"
+config BUSYBOX_CONFIG_FEATURE_HWCLOCK_LONG_OPTIONS
+	bool "Support long options (--hctosys,...)"
 	default n
-	depends on BUSYBOX_CONFIG_HWCLOCK
+	depends on BUSYBOX_CONFIG_HWCLOCK && BUSYBOX_CONFIG_GETOPT_LONG
 	help
 	  By default, the hwclock utility only uses short options.  If you
 	  are overly fond of its long options, such as --hctosys, --utc, etc)
 	  then enable this option.
 
+config BUSYBOX_CONFIG_FEATURE_HWCLOCK_ADJTIME_FHS
+	bool "Use FHS /var/lib/hwclock/adjtime"
+	default n
+	depends on BUSYBOX_CONFIG_HWCLOCK
+	help
+	  Starting with FHS 2.3, the adjtime state file is supposed to exist
+	  at /var/lib/hwclock/adjtime instead of /etc/adjtime.  If you wish
+	  to use the FHS behavior, answer Y here, otherwise answer N for the
+	  classic /etc/adjtime path.
+
+	  http://www.pathname.com/fhs/pub/fhs-2.3.html#VARLIBHWCLOCKSTATEDIRECTORYFORHWCLO
+
+config BUSYBOX_CONFIG_IPCRM
+	bool "ipcrm"
+	default n
+	select BUSYBOX_CONFIG_FEATURE_SUID
+	help
+	  The ipcrm utility allows the removal of System V interprocess
+	  communication (IPC) objects and the associated data structures
+	  from the system.
+
+config BUSYBOX_CONFIG_IPCS
+	bool "ipcs"
+	default n
+	select BUSYBOX_CONFIG_FEATURE_SUID
+	help
+	  The ipcs utility is used to provide information on the currently
+	  allocated System V interprocess (IPC) objects in the system.
+
 config BUSYBOX_CONFIG_LOSETUP
 	bool "losetup"
 	default n
@@ -218,6 +293,62 @@ config BUSYBOX_CONFIG_LOSETUP
 	  file or block device, and to query the status of a loop device.  This
 	  version does not currently support enabling data encryption.
 
+config BUSYBOX_CONFIG_MDEV
+	bool "mdev"
+	default n
+	help
+	  mdev is a mini-udev implementation for dynamically creating device
+	  nodes in the /dev directory.
+
+	  For more information, please see docs/mdev.txt
+
+config BUSYBOX_CONFIG_FEATURE_MDEV_CONF
+	bool "Support /etc/mdev.conf"
+	default n
+	depends on BUSYBOX_CONFIG_MDEV
+	help
+	  Add support for the mdev config file to control ownership and
+	  permissions of the device nodes.
+
+	  For more information, please see docs/mdev.txt
+
+config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
+	bool "Support subdirs/symlinks"
+	default n
+	depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
+	help
+	  Add support for renaming devices and creating symlinks.
+
+	  For more information, please see docs/mdev.txt
+
+config BUSYBOX_CONFIG_FEATURE_MDEV_RENAME_REGEXP
+	bool "Support regular expressions substitutions when renaming device"
+	default n
+	depends on BUSYBOX_CONFIG_FEATURE_MDEV_RENAME
+	help
+	  Add support for regular expressions substitutions when renaming device.
+
+config BUSYBOX_CONFIG_FEATURE_MDEV_EXEC
+	bool "Support command execution at device addition/removal"
+	default n
+	depends on BUSYBOX_CONFIG_FEATURE_MDEV_CONF
+	help
+	  This adds support for an optional field to /etc/mdev.conf for
+	  executing commands when devices are created/removed.
+
+	  For more information, please see docs/mdev.txt
+
+config BUSYBOX_CONFIG_FEATURE_MDEV_LOAD_FIRMWARE
+	bool "Support loading of firmwares"
+	default n
+	depends on BUSYBOX_CONFIG_MDEV
+	help
+	  Some devices need to load firmware before they can be usable.
+
+	  These devices will request userspace look up the files in
+	  /lib/firmware/ and if it exists, send it to the kernel for
+	  loading into the hardware.
+
 config BUSYBOX_CONFIG_MKSWAP
 	bool "mkswap"
 	default n
@@ -231,9 +362,19 @@ config BUSYBOX_CONFIG_MKSWAP
 	  Once you have created swap space using 'mkswap' you need to enable
 	  the swap space using the 'swapon' utility.
 
+config BUSYBOX_CONFIG_FEATURE_MKSWAP_V0
+	bool "Version 0 support"
+	default n
+	depends on BUSYBOX_CONFIG_MKSWAP
+#	depends on MKSWAP && BUSYBOX_CONFIG_DEPRECATED
+	help
+	  Enable support for the old v0 style.
+	  If your kernel is older than 2.1.117, then v0 support is the
+	  only option.
+
 config BUSYBOX_CONFIG_MORE
 	bool "more"
-	default y
+	default n
 	help
 	  more is a simple utility which allows you to read text one screen
 	  sized page at a time.  If you want to read text that is larger than
@@ -242,9 +383,9 @@ config BUSYBOX_CONFIG_MORE
 	  any need to reading text files, you can leave this disabled.
 
 config BUSYBOX_CONFIG_FEATURE_USE_TERMIOS
-	bool "  Use termios to manipulate the screen"
-	default y
-	depends on BUSYBOX_CONFIG_MORE
+	bool "Use termios to manipulate the screen"
+	default n
+	depends on BUSYBOX_CONFIG_MORE || BUSYBOX_CONFIG_TOP
 	help
 	  This option allows utilities such as 'more' and 'top' to determine
 	  the size of the screen.  If you leave this disabled, your utilities
@@ -252,6 +393,297 @@ config BUSYBOX_CONFIG_FEATURE_USE_TERMIOS
 	  will be unable to determine the current screen size, and will be
 	  unable to move the cursor.
 
+config BUSYBOX_CONFIG_VOLUMEID
+	bool "Routines for detecting label and uuid on common filesystems"
+	default n
+	help
+	  TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_EXT
+	bool "Ext filesystem"
+	default n
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_REISERFS
+	bool "Reiser filesystem"
+	default n
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_FAT
+	bool "fat filesystem"
+	default n
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_HFS
+	bool "hfs filesystem"
+	default n
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_JFS
+	bool "jfs filesystem"
+	default n
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+### config FEATURE_VOLUMEID_UFS
+###	bool "ufs filesystem"
+###	default n
+###	depends on VOLUMEID
+###	help
+###	  TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_XFS
+	bool "xfs filesystem"
+	default n
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_NTFS
+	bool "ntfs filesystem"
+	default n
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ISO9660
+	bool "iso9660 filesystem"
+	default n
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_UDF
+	bool "udf filesystem"
+	default n
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LUKS
+	bool "luks filesystem"
+	default n
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXSWAP
+	bool "linux swap filesystem"
+	default n
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+### config FEATURE_VOLUMEID_LVM
+###	bool "lvm"
+###	default n
+###	depends on VOLUMEID
+###	help
+###	  TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_CRAMFS
+	bool "cramfs filesystem"
+	default n
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+### config FEATURE_VOLUMEID_HPFS
+###	bool "hpfs filesystem"
+###	default n
+###	depends on VOLUMEID
+###	help
+###	  TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_ROMFS
+	bool "romfs filesystem"
+	default n
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_SYSV
+	bool "sysv filesystem"
+	default n
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+### config FEATURE_VOLUMEID_MINIX
+###	bool "minix filesystem"
+###	default n
+###	depends on VOLUMEID
+###	help
+###	  TODO
+
+### These only detect partition tables - not used (yet?)
+### config FEATURE_VOLUMEID_MAC
+###	bool "mac filesystem"
+###	default n
+###	depends on VOLUMEID
+###	help
+###	  TODO
+###
+### config FEATURE_VOLUMEID_MSDOS
+###	bool "msdos filesystem"
+###	default n
+###	depends on VOLUMEID
+###	help
+###	  TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_OCFS2
+	bool "ocfs2 filesystem"
+	default n
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+### config FEATURE_VOLUMEID_HIGHPOINTRAID
+###	bool "highpoint raid"
+###	default n
+###	depends on VOLUMEID
+###	help
+###	  TODO
+
+### config FEATURE_VOLUMEID_ISWRAID
+###	bool "intel raid"
+###	default n
+###	depends on VOLUMEID
+###	help
+###	  TODO
+
+### config FEATURE_VOLUMEID_LSIRAID
+###	bool "lsi raid"
+###	default n
+###	depends on VOLUMEID
+###	help
+###	  TODO
+
+### config FEATURE_VOLUMEID_VIARAID
+###	bool "via raid"
+###	default n
+###	depends on VOLUMEID
+###	help
+###	  TODO
+
+### config FEATURE_VOLUMEID_SILICONRAID
+###	bool "silicon raid"
+###	default n
+###	depends on VOLUMEID
+###	help
+###	  TODO
+
+### config FEATURE_VOLUMEID_NVIDIARAID
+###	bool "nvidia raid"
+###	default n
+###	depends on VOLUMEID
+###	help
+###	  TODO
+
+### config FEATURE_VOLUMEID_PROMISERAID
+###	bool "promise raid"
+###	default n
+###	depends on VOLUMEID
+###	help
+###	  TODO
+
+config BUSYBOX_CONFIG_FEATURE_VOLUMEID_LINUXRAID
+	bool "linuxraid"
+	default n
+	depends on BUSYBOX_CONFIG_VOLUMEID
+	help
+	  TODO
+
+config BUSYBOX_CONFIG_MOUNT
+	bool "mount"
+	default y
+	help
+	  All files and filesystems in Unix are arranged into one big directory
+	  tree.  The 'mount' utility is used to graft a filesystem onto a
+	  particular part of the tree.  A filesystem can either live on a block
+	  device, or it can be accessible over the network, as is the case with
+	  NFS filesystems.  Most people using BusyBox will also want to enable
+	  the 'mount' utility.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
+	bool "Support option -f"
+	default n
+	depends on BUSYBOX_CONFIG_MOUNT
+	help
+	  Enable support for faking a file system mount.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_VERBOSE
+	bool "Support option -v"
+	default n
+	depends on BUSYBOX_CONFIG_MOUNT
+	help
+	  Enable multi-level -v[vv...] verbose messages. Useful if you
+	  debug mount problems and want to see what is exactly passed
+	  to the kernel.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_HELPERS
+	bool "Support mount helpers"
+	default n
+	depends on BUSYBOX_CONFIG_MOUNT
+	help
+	  Enable mounting of virtual file systems via external helpers.
+	  E.g. "mount obexfs#-b00.11.22.33.44.55 /mnt" will in effect call
+	  "obexfs -b00.11.22.33.44.55 /mnt"
+	  Also "mount -t sometype [-o opts] fs /mnt" will try
+	  "sometype [-o opts] fs /mnt" if simple mount syscall fails.
+	  The idea is to use such virtual filesystems in /etc/fstab.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_LABEL
+	bool "Support specifiying devices by label or UUID"
+	default n
+	depends on BUSYBOX_CONFIG_MOUNT
+	select BUSYBOX_CONFIG_VOLUMEID
+	help
+	  This allows for specifying a device by label or uuid, rather than by
+	  name.  This feature utilizes the same functionality as findfs.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_NFS
+	bool "Support mounting NFS file systems"
+	default y
+	depends on BUSYBOX_CONFIG_MOUNT
+	select BUSYBOX_CONFIG_FEATURE_HAVE_RPC
+	select BUSYBOX_CONFIG_FEATURE_SYSLOG
+	help
+	  Enable mounting of NFS file systems.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_CIFS
+	bool "Support mounting CIFS/SMB file systems"
+	default y
+	depends on BUSYBOX_CONFIG_MOUNT
+	help
+	  Enable support for samba mounts.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_FLAGS
+	depends on BUSYBOX_CONFIG_MOUNT
+	bool "Support lots of -o flags in mount"
+	default y
+	help
+	  Without this, mount only supports ro/rw/remount.  With this, it
+	  supports nosuid, suid, dev, nodev, exec, noexec, sync, async, atime,
+	  noatime, diratime, nodiratime, loud, bind, move, shared, slave,
+	  private, unbindable, rshared, rslave, rprivate, and runbindable.
+
+config BUSYBOX_CONFIG_FEATURE_MOUNT_FSTAB
+	depends on BUSYBOX_CONFIG_MOUNT
+	bool "Support /etc/fstab and -a"
+	default y
+	help
+	  Support mount all and looking for files in /etc/fstab.
+
 config BUSYBOX_CONFIG_PIVOT_ROOT
 	bool "pivot_root"
 	default y
@@ -261,6 +693,9 @@ config BUSYBOX_CONFIG_PIVOT_ROOT
 	  of wild and crazy things with your Linux system and is far more
 	  powerful than 'chroot'.
 
+	  Note: This is for initrd in linux 2.4.  Under initramfs (introduced
+	  in linux 2.6) use switch_root instead.
+
 config BUSYBOX_CONFIG_RDATE
 	bool "rdate"
 	default y
@@ -270,6 +705,33 @@ config BUSYBOX_CONFIG_RDATE
 	  the RFC868 protocol, which is built into the inetd daemon on most
 	  systems.
 
+config BUSYBOX_CONFIG_READPROFILE
+	bool "readprofile"
+	default n
+	help
+	  This allows you to parse /proc/profile for basic profiling.
+
+config BUSYBOX_CONFIG_RTCWAKE
+	bool "rtcwake"
+	default n
+	help
+	  Enter a system sleep state until specified wakeup time.
+
+config BUSYBOX_CONFIG_SCRIPT
+	bool "script"
+	default n
+	help
+	  The script makes typescript of terminal session.
+
+config BUSYBOX_CONFIG_SETARCH
+	bool "setarch"
+	default n
+	help
+	  The linux32 utility is used to create a 32bit environment for the
+	  specified program (usually a shell).  It only makes sense to have
+	  this util on a system that supports both 64bit and 32bit userland
+	  (like amd64/x86, ppc64/ppc, sparc64/sparc, etc...).
+
 config BUSYBOX_CONFIG_SWAPONOFF
 	bool "swaponoff"
 	default n
@@ -281,23 +743,31 @@ config BUSYBOX_CONFIG_SWAPONOFF
 	  space.  If you are not using any swap space, you can leave this
 	  option disabled.
 
-config BUSYBOX_CONFIG_MOUNT
-	bool "mount"
-	default y
+config BUSYBOX_CONFIG_FEATURE_SWAPON_PRI
+	bool "Support priority option -p"
+	default n
+	depends on BUSYBOX_CONFIG_SWAPONOFF
 	help
-	  All files and filesystems in Unix are arranged into one big directory
-	  tree.  The 'mount' utility is used to graft a filesystem onto a
-	  particular part of the tree.  A filesystem can either live on a block
-	  device, or it can be accessible over the network, as is the case with
-	  NFS filesystems.  Most people using BusyBox will also want to enable
-	  the 'mount' utility.
+	  Enable support for setting swap device priority in swapon.
 
-config BUSYBOX_FEATURE_MOUNT_NFS
-	bool "  Support mounting NFS file systems"
+config BUSYBOX_CONFIG_SWITCH_ROOT
+	bool "switch_root"
 	default y
-	depends on BUSYBOX_CONFIG_MOUNT
 	help
-	 Enable mounting of NFS file systems.
+	  The switch_root utility is used from initramfs to select a new
+	  root device.  Under initramfs, you have to use this instead of
+	  pivot_root.  (Stop reading here if you don't care why.)
+
+	  Booting with initramfs extracts a gzipped cpio archive into rootfs
+	  (which is a variant of ramfs/tmpfs).  Because rootfs can't be moved
+	  or unmounted*, pivot_root will not work from initramfs.  Instead,
+	  switch_root deletes everything out of rootfs (including itself),
+	  does a mount --move that overmounts rootfs with the new root, and
+	  then execs the specified init program.
+
+	  * Because the Linux kernel uses rootfs internally as the starting
+	  and ending point for searching through the kernel's doubly linked
+	  list of active mount points.  That's why.
 
 config BUSYBOX_CONFIG_UMOUNT
 	bool "umount"
@@ -308,50 +778,54 @@ config BUSYBOX_CONFIG_UMOUNT
 	  the tool to use.  If you enabled the 'mount' utility, you almost certainly
 	  also want to enable 'umount'.
 
-config BUSYBOX_CONFIG_FEATURE_MOUNT_FORCE
-	bool "  Support forced filesystem unmounting"
+config BUSYBOX_CONFIG_FEATURE_UMOUNT_ALL
+	bool "Support option -a"
 	default y
 	depends on BUSYBOX_CONFIG_UMOUNT
 	help
-	  This allows you to _force_ a filesystem to be umounted.  This is generally
-	  only useful when you want to get rid of an unreachable NFS system.
+	  Support -a option to unmount all currently mounted filesystems.
 
 comment "Common options for mount/umount"
 	depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
 
 config BUSYBOX_CONFIG_FEATURE_MOUNT_LOOP
-	bool "  Support for loop devices"
+	bool "Support loopback mounts"
 	default y
 	depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
 	help
-	  Enabling this feature allows mount to use the '-o' loop options,
-	  which lets you loop mount files.  Mount will automagically setup and
-	  free the necessary loop devices so you do not need to mess with the
-	  'losetup' utility unless you really want to.  This is really
-	  only useful if you plan to loop mount files.
+	  Enabling this feature allows automatic mounting of files (containing
+	  filesystem images) via the linux kernel's loopback devices.  The mount
+	  command will detect you are trying to mount a file instead of a block
+	  device, and transparently associate the file with a loopback device.
+	  The umount command will also free that loopback device.
+
+	  You can still use the 'losetup' utility (to manually associate files
+	  with loop devices) if you need to do something advanced, such as
+	  specify an offset or cryptographic options to the loopback device.
+	  (If you don't want umount to free the loop device, use "umount -D".)
 
 config BUSYBOX_CONFIG_FEATURE_MTAB_SUPPORT
-	bool "  Support for a real /etc/mtab (instead of /proc/mounts)"
+	bool "Support for the old /etc/mtab file"
 	default n
 	depends on BUSYBOX_CONFIG_MOUNT || BUSYBOX_CONFIG_UMOUNT
-	help
-	  If your root filesystem is writable and you wish to have the 'mount'
-	  utility create an mtab file listing the filesystems which have been
-	  mounted then you should enable this option.  Most people that use
-	  BusyBox have a read-only root filesystem, so they will leave this
-	  option disabled and BusyBox will use the /proc/mounts file.
-
-config BUSYBOX_CONFIG_FEATURE_MTAB_FILENAME
-	string "  mtab file location"
-	default n
-	depends on BUSYBOX_CONFIG_FEATURE_MTAB_SUPPORT
-	help
-	  Some people have a read only root filesystem, but they also wish to
-	  have the 'mount' utility create an mtab file listing the filesystems
-	  which have been mounted.  This option allows you to specify an alternative
-	  location for the mtab file, such as /var/mtab, or /tmp/mtab.  The default
-	  value is /etc/mtab, which is where this file is located on most desktop
-	  Linux systems.
+	select BUSYBOX_CONFIG_FEATURE_MOUNT_FAKE
+	help
+	  Historically, Unix systems kept track of the currently mounted
+	  partitions in the file "/etc/mtab".  These days, the kernel exports
+	  the list of currently mounted partitions in "/proc/mounts", rendering
+	  the old mtab file obsolete.  (In modern systems, /etc/mtab should be
+	  a symlink to /proc/mounts.)
+
+	  The only reason to have mount maintain an /etc/mtab file itself is if
+	  your stripped-down embedded system does not have a /proc directory.
+	  If you must use this, keep in mind it's inherently brittle (for
+	  example a mount under chroot won't update it), can't handle modern
+	  features like separate per-process filesystem namespaces, requires
+	  that your /etc directory be writeable, tends to get easily confused
+	  by --bind or --move mounts, won't update if you rename a directory
+	  that contains a mount point, and so on.  (In brief: avoid.)
+
+	  About the only reason to use this is if you've removed /proc from
+	  your kernel.
 
 endmenu
-