X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/a5c4f544067e9cf7a79342bd20547beb41d80fba..118b74e6cd80af62df53057001fb6d1476cb4ca6:/target/linux/atheros/patches-2.6.28/110-ar2313_ethernet.patch

diff --git a/target/linux/atheros/patches-2.6.28/110-ar2313_ethernet.patch b/target/linux/atheros/patches-2.6.28/110-ar2313_ethernet.patch
index ea61bcd3e..49ca66e21 100644
--- a/target/linux/atheros/patches-2.6.28/110-ar2313_ethernet.patch
+++ b/target/linux/atheros/patches-2.6.28/110-ar2313_ethernet.patch
@@ -25,7 +25,7 @@
  obj-$(CONFIG_DECLANCE) += declance.o
 --- /dev/null
 +++ b/drivers/net/ar231x.c
-@@ -0,0 +1,1267 @@
+@@ -0,0 +1,1264 @@
 +/*
 + * ar231x.c: Linux driver for the Atheros AR231x Ethernet device.
 + *
@@ -301,23 +301,24 @@
 +	sp->mii_bus->write = ar231x_mdiobus_write;
 +	sp->mii_bus->reset = ar231x_mdiobus_reset;
 +	sp->mii_bus->name = "ar231x_eth_mii";
-+	snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "0");
++	snprintf(sp->mii_bus->id, MII_BUS_ID_SIZE, "%d", pdev->id);
 +	sp->mii_bus->irq = kmalloc(sizeof(int), GFP_KERNEL);
 +	*sp->mii_bus->irq = PHY_POLL;
 +
 +	mdiobus_register(sp->mii_bus);
 +
 +	if (ar231x_mdiobus_probe(dev) != 0) {
-+		printk(KERN_ERR "ar231x: mdiobus_probe failed");
++		printk(KERN_ERR "%s: mdiobus_probe failed\n", dev->name);
 +		rx_tasklet_cleanup(dev);
 +		ar231x_init_cleanup(dev);
 +		unregister_netdev(dev);
 +		kfree(dev);
-+	} else {
-+		/* start link poll timer */
-+		ar231x_setup_timer(dev);
++		return -ENODEV;
 +	}
 +
++	/* start link poll timer */
++	ar231x_setup_timer(dev);
++
 +	return 0;
 +}
 +
@@ -767,15 +768,12 @@
 +		if (sp->rx_skb[idx])
 +			break;
 +
-+		// partha: create additional room for the second GRE fragment
-+		skb = alloc_skb(AR2313_BUFSIZE + 128, GFP_ATOMIC);
++		skb = netdev_alloc_skb(dev, AR2313_BUFSIZE);
 +		if (!skb) {
 +			printk("\n\n\n\n %s: No memory in system\n\n\n\n",
 +				   __FUNCTION__);
 +			break;
 +		}
-+		// partha: create additional room in the front for tx pkt capture
-+		skb_reserve(skb, 32);
 +
 +		/*
 +		 * Make sure IP header starts on a fresh cache line.
@@ -835,8 +833,7 @@
 +			break;
 +		}
 +
-+		if ((status & (DMA_RX_ERROR | DMA_RX_ERR_LENGTH)) &&
-+			(!(status & DMA_RX_LONG))) {
++		if ((status & DMA_RX_ERROR) && !(status & DMA_RX_LONG)) {
 +			dev->stats.rx_errors++;
 +			dev->stats.rx_dropped++;
 +
@@ -854,7 +851,7 @@
 +
 +		} else {
 +			/* alloc new buffer. */
-+			skb_new = dev_alloc_skb(AR2313_BUFSIZE + RX_OFFSET + 128);
++			skb_new = netdev_alloc_skb(dev, AR2313_BUFSIZE + RX_OFFSET);
 +			if (skb_new != NULL) {
 +
 +				skb = sp->rx_skb[idx];
@@ -869,7 +866,7 @@
 +
 +				skb_new->dev = dev;
 +				/* 16 bit align */
-+				skb_reserve(skb_new, RX_OFFSET + 32);
++				skb_reserve(skb_new, RX_OFFSET);
 +				/* reset descriptor's curr_addr */
 +				rxdesc->addr = virt_to_phys(skb_new->data);
 +