X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/aaebf665ab9af10296339aa1ef32ebc8f59c9c34..288c968dab227cc5b83a9e2983d65cfaa605504f:/package/broadcom-diag/src/diag.c diff --git a/package/broadcom-diag/src/diag.c b/package/broadcom-diag/src/diag.c index 38f51cb65..e60b66c91 100644 --- a/package/broadcom-diag/src/diag.c +++ b/package/broadcom-diag/src/diag.c @@ -27,20 +27,12 @@ #include #include #include - -#ifndef LINUX_2_4 #include #include #include +#include #include -extern struct sock *uevent_sock; extern u64 uevent_next_seqnum(void); -#else -#include -#define INIT_WORK INIT_TQUEUE -#define schedule_work schedule_task -#define work_struct tq_struct -#endif #include "gpio.h" #include "diag.h" @@ -67,6 +59,8 @@ enum { WRT600N, WRT600NV11, WRT610N, + WRT610NV2, + E3000V1, /* ASUS */ WLHDD, @@ -82,6 +76,7 @@ enum { WL520GU, ASUS_4702, WL700GE, + RTN16, /* Buffalo */ WBR2_G54, @@ -115,9 +110,12 @@ enum { /* Belkin */ BELKIN_UNKNOWN, + BELKIN_F7D4301, /* Netgear */ WGT634U, + WNR834BV1, + WNR834BV2, /* Trendware */ TEW411BRPP, @@ -145,6 +143,9 @@ enum { /* Microsoft */ MN700, + + /* Edimax */ + PS1208MFG, }; static void __init bcm4780_init(void) { @@ -179,12 +180,10 @@ static void __init NetCenter_init(void) { static void __init bcm57xx_init(void) { int pin = 1 << 2; -#ifndef LINUX_2_4 /* FIXME: switch comes up, but port mappings/vlans not right */ gpio_outen(pin, pin); gpio_control(pin, 0); gpio_out(pin, pin); -#endif } static struct platform_t __initdata platforms[] = { @@ -276,7 +275,7 @@ static struct platform_t __initdata platforms[] = { .name = "Linksys WRT54G3GV2-VF", .buttons = { { .name = "reset", .gpio = 1 << 6 }, - { .name = "3g", .gpio = 1 << 4 }, + { .name = "3g", .gpio = 1 << 5 }, }, .leds = { { .name = "power", .gpio = 1 << 1, .polarity = NORMAL }, @@ -369,6 +368,34 @@ static struct platform_t __initdata platforms[] = { { .name = "ses_blue", .gpio = 1 << 9, .polarity = REVERSE }, // WiFi protected setup LED blue }, }, + [WRT610NV2] = { + .name = "Linksys WRT610N V2", + .buttons = { + { .name = "reset", .gpio = 1 << 6 }, + { .name = "ses", .gpio = 1 << 4 }, + }, + .leds = { + { .name = "power", .gpio = 1 << 5, .polarity = NORMAL }, // Power LED + { .name = "usb", .gpio = 1 << 7, .polarity = NORMAL }, // USB LED + { .name = "ses_amber", .gpio = 1 << 0, .polarity = REVERSE }, // WiFi protected setup LED amber + { .name = "ses_blue", .gpio = 1 << 3, .polarity = REVERSE }, // WiFi protected setup LED blue + { .name = "wlan", .gpio = 1 << 1, .polarity = NORMAL }, // Wireless LED + }, + }, + [E3000V1] = { + .name = "Linksys E3000 V1", + .buttons = { + { .name = "reset", .gpio = 1 << 6 }, + { .name = "ses", .gpio = 1 << 4 }, + }, + .leds = { + { .name = "power", .gpio = 1 << 5, .polarity = NORMAL }, // Power LED + { .name = "usb", .gpio = 1 << 7, .polarity = NORMAL }, // USB LED + { .name = "ses_amber", .gpio = 1 << 0, .polarity = REVERSE }, // WiFi protected setup LED amber + { .name = "ses_blue", .gpio = 1 << 3, .polarity = REVERSE }, // WiFi protected setup LED blue + { .name = "wlan", .gpio = 1 << 1, .polarity = NORMAL }, // Wireless LED + }, + }, /* Asus */ [WLHDD] = { .name = "ASUS WL-HDD", @@ -508,6 +535,17 @@ static struct platform_t __initdata platforms[] = { }, .platform_init = bcm4780_init, }, + [RTN16] = { + .name = "ASUS RT-N16", + .buttons = { + { .name = "reset", .gpio = 1 << 8 }, + { .name = "ses", .gpio = 1 << 5 }, + }, + .leds = { + { .name = "power", .gpio = 1 << 1, .polarity = REVERSE }, + { .name = "wlan", .gpio = 1 << 7, .polarity = NORMAL }, + }, + }, /* Buffalo */ [WHR_G54S] = { .name = "Buffalo WHR-G54S", @@ -754,6 +792,19 @@ static struct platform_t __initdata platforms[] = { { .name = "connected", .gpio = 1 << 0, .polarity = NORMAL }, }, }, + [BELKIN_F7D4301] = { + .name = "Belkin PlayMax F7D4301", + .buttons = { + { .name = "reset", .gpio = 1 << 6 }, + { .name = "wps", .gpio = 1 << 8 }, + }, + .leds = { + { .name = "power", .gpio = 1 << 11, .polarity = REVERSE }, + { .name = "wlan", .gpio = 1 << 13, .polarity = REVERSE }, + { .name = "led0", .gpio = 1 << 14, .polarity = REVERSE }, + { .name = "led1", .gpio = 1 << 15, .polarity = REVERSE }, + }, + }, /* Netgear */ [WGT634U] = { .name = "Netgear WGT634U", @@ -764,6 +815,28 @@ static struct platform_t __initdata platforms[] = { { .name = "power", .gpio = 1 << 3, .polarity = NORMAL }, }, }, + /* Netgear */ + [WNR834BV1] = { + .name = "Netgear WNR834B V1", + .buttons = { /* TODO: add reset button and confirm LEDs - GPIO from dd-wrt */ }, + .leds = { + { .name = "power", .gpio = 1 << 4, .polarity = REVERSE }, + { .name = "diag", .gpio = 1 << 5, .polarity = REVERSE }, + { .name = "wlan", .gpio = 1 << 6, .polarity = REVERSE }, + }, + }, + /* Netgear */ + [WNR834BV2] = { + .name = "Netgear WNR834B V2", + .buttons = { + { .name = "reset", .gpio = 1 << 6 }, + }, + .leds = { + { .name = "power", .gpio = 1 << 2, .polarity = NORMAL }, + { .name = "diag", .gpio = 1 << 3, .polarity = NORMAL }, + { .name = "connected", .gpio = 1 << 7, .polarity = NORMAL }, + }, + }, /* Trendware */ [TEW411BRPP] = { .name = "Trendware TEW411BRP+", @@ -780,8 +853,7 @@ static struct platform_t __initdata platforms[] = { [STI_NAS] = { .name = "SimpleTech SimpleShare NAS", .buttons = { - { .name = "reset", .gpio = 1 << 7 }, // on back, hardwired, always resets device regardless OS state - { .name = "power", .gpio = 1 << 0 }, // on back + { .name = "reset", .gpio = 1 << 0 }, // Power button on back, named reset to enable failsafe. }, .leds = { { .name = "diag", .gpio = 1 << 1, .polarity = REVERSE }, // actual name ready @@ -894,6 +966,17 @@ static struct platform_t __initdata platforms[] = { { .name = "power", .gpio = 1 << 6, .polarity = NORMAL }, }, }, + /* Edimax */ + [PS1208MFG] = { + .name = "Edimax PS-1208MFG", + .buttons = { + { .name = "reset", .gpio = 1 << 4 }, + }, + .leds = { + { .name = "status", .gpio = 1 << 1, .polarity = NORMAL }, + { .name = "wlan", .gpio = 1 << 0, .polarity = NORMAL }, + }, + }, }; static struct platform_t __init *platform_detect(void) @@ -935,6 +1018,10 @@ static struct platform_t __init *platform_detect(void) return &platforms[WL520GU]; if (startswith(buf,"WL330GE-")) /* WL330GE-* */ return &platforms[WL330GE]; + if (startswith(buf,"RT-N16-")) /* RT-N16-* */ + return &platforms[RTN16]; + if (startswith(buf,"F7D4301")) /* F7D4301* */ + return &platforms[BELKIN_F7D4301]; } /* Based on "ModelId" */ @@ -984,6 +1071,19 @@ static struct platform_t __init *platform_detect(void) return &platforms[WRT600N]; } + /* + * Normally, these would go inside the "CFE based - newer hardware" block below; however, during early init, the + * "pmon_ver" variable is not available on the E3000v1 (and probably the WRT610Nv2 also). Until this is figured out, + * these will need to remain here in order for platform detection to work. + */ + if (!strcmp(boardnum, "42")) { /* Linksys */ + if (!strcmp(boardtype, "0x04cf") && !strcmp(getvar("boot_hw_model"), "E300") && !strcmp(getvar("boot_hw_ver"), "1.0")) + return &platforms[E3000V1]; + + if (!strcmp(boardtype, "0x04cf") && !strcmp(getvar("boot_hw_model"), "WRT610N") && !strcmp(getvar("boot_hw_ver"), "2.0")) + return &platforms[WRT610NV2]; + } + if (startswith(getvar("pmon_ver"), "CFE")) { /* CFE based - newer hardware */ if (!strcmp(boardnum, "42")) { /* Linksys */ @@ -1045,6 +1145,13 @@ static struct platform_t __init *platform_detect(void) return &platforms[WDNetCenter]; } + if (!strcmp(boardtype,"0x0472") && !strcmp(getvar("cardbus"), "1")) { /* Netgear WNR834B V1 and V2*/ + if (!strcmp(boardnum, "08") || !strcmp(boardnum, "8")) + return &platforms[WNR834BV1]; + if (!strcmp(boardnum, "01") || !strcmp(boardnum, "1")) + return &platforms[WNR834BV2]; + } + } else { /* PMON based - old stuff */ if ((simple_strtoul(getvar("GemtekPmonVer"), NULL, 0) == 9) && (simple_strtoul(getvar("et0phyaddr"), NULL, 0) == 30)) { @@ -1111,12 +1218,16 @@ static struct platform_t __init *platform_detect(void) return &platforms[TEW411BRPP]; } - if (startswith(boardnum, "04FN52")) /* SimpleTech SimpleShare */ + if (startswith(boardnum, "04FN")) /* SimpleTech SimpleShare */ return &platforms[STI_NAS]; - if (!strcmp(getvar("boardnum"), "10") && !strcmp(getvar("boardrev"), "0x13")) /* D-Link DWL-3150 */ + if (!strcmp(boardnum, "10") && !strcmp(getvar("boardrev"), "0x13")) /* D-Link DWL-3150 */ return &platforms[DWL3150]; + if (!strcmp(boardnum, "01") && !strcmp(boardtype, "0x048e") && /* Edimax PS1208MFG */ + !strcmp(getvar("status_gpio"), "1")) /* gpio based detection */ + return &platforms[PS1208MFG]; + /* not found */ return NULL; } @@ -1145,7 +1256,6 @@ static void unregister_buttons(struct button_t *b) } -#ifndef LINUX_2_4 static void add_msg(struct event_t *event, char *msg, int argv) { char *s; @@ -1162,9 +1272,6 @@ static void hotplug_button(struct work_struct *work) struct event_t *event = container_of(work, struct event_t, wq); char *s; - if (!uevent_sock) - return; - event->skb = alloc_skb(2048, GFP_KERNEL); s = skb_put(event->skb, strlen(event->action) + 2); @@ -1172,48 +1279,11 @@ static void hotplug_button(struct work_struct *work) fill_event(event); NETLINK_CB(event->skb).dst_group = 1; - netlink_broadcast(uevent_sock, event->skb, 0, 1, GFP_KERNEL); + broadcast_uevent(event->skb, 0, 1, GFP_KERNEL); kfree(event); } -#else /* !LINUX_2_4 */ -static inline char *kzalloc(unsigned int size, unsigned int gfp) -{ - char *p; - - p = kmalloc(size, gfp); - if (p == NULL) - return NULL; - - memset(p, 0, size); - - return p; -} - -static void add_msg(struct event_t *event, char *msg, int argv) -{ - if (argv) - event->argv[event->anr++] = event->scratch; - else - event->envp[event->enr++] = event->scratch; - - event->scratch += sprintf(event->scratch, "%s", msg) + 1; -} - -static void hotplug_button(struct event_t *event) -{ - char *scratch = kzalloc(256, GFP_KERNEL); - event->scratch = scratch; - - add_msg(event, hotplug_path, 1); - add_msg(event, "button", 1); - fill_event(event); - call_usermodehelper (event->argv[0], event->argv, event->envp); - kfree(scratch); - kfree(event); -} -#endif /* !LINUX_2_4 */ static int fill_event (struct event_t *event) { @@ -1228,20 +1298,14 @@ static int fill_event (struct event_t *event) add_msg(event, buf, 0); snprintf(buf, 128, "SEEN=%ld", event->seen); add_msg(event, buf, 0); -#ifndef LINUX_2_4 snprintf(buf, 128, "SEQNUM=%llu", uevent_next_seqnum()); add_msg(event, buf, 0); -#endif return 0; } -#ifndef LINUX_2_4 static irqreturn_t button_handler(int irq, void *dev_id) -#else -static irqreturn_t button_handler(int irq, void *dev_id, struct pt_regs *regs) -#endif { struct button_t *b; u32 in, changed; @@ -1264,11 +1328,7 @@ static irqreturn_t button_handler(int irq, void *dev_id, struct pt_regs *regs) event->seen = (jiffies - b->seen)/HZ; event->name = b->name; event->action = b->pressed ? "pressed" : "released"; -#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,6,20) INIT_WORK(&event->wq, (void *)(void *)hotplug_button); -#else - INIT_WORK(&event->wq, (void *)(void *)hotplug_button, (void *)event); -#endif schedule_work(&event->wq); } @@ -1362,12 +1422,7 @@ static void led_flash(unsigned long dummy) { static ssize_t diag_proc_read(struct file *file, char *buf, size_t count, loff_t *ppos) { -#ifdef LINUX_2_4 - struct inode *inode = file->f_dentry->d_inode; - struct proc_dir_entry *dent = inode->u.generic_ip; -#else struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode); -#endif char *page; int len = 0; @@ -1420,12 +1475,7 @@ static ssize_t diag_proc_read(struct file *file, char *buf, size_t count, loff_t static ssize_t diag_proc_write(struct file *file, const char *buf, size_t count, loff_t *ppos) { -#ifdef LINUX_2_4 - struct inode *inode = file->f_dentry->d_inode; - struct proc_dir_entry *dent = inode->u.generic_ip; -#else struct proc_dir_entry *dent = PDE(file->f_dentry->d_inode); -#endif char *page; int ret = -EINVAL;