X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/b14d40272eb178a72870b90d65b953532eccf05d..9445c77d7c4c2ffe9c751f4f9610d70ae65e346c:/openwrt/target/linux/xscale-2.6/patches/001-gateway_7001.patch diff --git a/openwrt/target/linux/xscale-2.6/patches/001-gateway_7001.patch b/openwrt/target/linux/xscale-2.6/patches/001-gateway_7001.patch index b8219f861..894267900 100644 --- a/openwrt/target/linux/xscale-2.6/patches/001-gateway_7001.patch +++ b/openwrt/target/linux/xscale-2.6/patches/001-gateway_7001.patch @@ -1,43 +1,32 @@ -diff -Nur linux-2.6.16.4/arch/arm/mach-ixp4xx/Kconfig linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/Kconfig ---- linux-2.6.16.4/arch/arm/mach-ixp4xx/Kconfig 2006-04-11 19:19:28.000000000 +0200 -+++ linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/Kconfig 2006-04-12 16:47:34.000000000 +0200 -@@ -30,6 +30,13 @@ - Engineering Coyote Gateway Reference Platform. For more - information on this platform, see . +diff -Nur linux-2.6.16.4/arch/arm/boot/compressed/head-xscale.S linux-2.6.16.4-owrt/arch/arm/boot/compressed/head-xscale.S +--- linux-2.6.16.4/arch/arm/boot/compressed/head-xscale.S 2006-04-11 19:19:28.000000000 +0200 ++++ linux-2.6.16.4-owrt/arch/arm/boot/compressed/head-xscale.S 2006-04-16 16:51:05.000000000 +0200 +@@ -47,6 +47,11 @@ + orr r7, r7, #(MACH_TYPE_GTWX5715 & 0xff00) + #endif -+config MACH_GATEWAY7001 -+ bool "Gateway 7001" -+ help -+ Say 'Y' here if you want your kernel to support Gateway's -+ 7001 Access Point. For more information on this platform, -+ see http://openwrt.org ++#ifdef CONFIG_MACH_GATEWAY7001 ++ mov r7, #(MACH_TYPE_GATEWAY7001 & 0xff) ++ orr r7, r7, #(MACH_TYPE_GATEWAY7001 & 0xff00) ++#endif + - config ARCH_IXDP425 - bool "IXDP425" - help -diff -Nur linux-2.6.16.4/arch/arm/mach-ixp4xx/Makefile linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/Makefile ---- linux-2.6.16.4/arch/arm/mach-ixp4xx/Makefile 2006-04-11 19:19:28.000000000 +0200 -+++ linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/Makefile 2006-04-12 22:34:09.000000000 +0200 -@@ -10,4 +10,5 @@ - obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o - obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o - obj-$(CONFIG_MACH_NAS100D) += nas100d-pci.o nas100d-setup.o nas100d-power.o -+obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o gateway7001-setup.o - + #ifdef CONFIG_ARCH_IXP2000 + mov r1, #-1 + mov r0, #0xd6000000 diff -Nur linux-2.6.16.4/arch/arm/mach-ixp4xx/gateway7001-pci.c linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c --- linux-2.6.16.4/arch/arm/mach-ixp4xx/gateway7001-pci.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c 2006-04-12 22:35:29.000000000 +0200 -@@ -0,0 +1,77 @@ ++++ linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/gateway7001-pci.c 2006-04-17 19:21:55.000000000 +0200 +@@ -0,0 +1,67 @@ +/* -+ * arch/arm/mach-ixp4xx/gateway7001-pci.c ++ * arch/arch/mach-ixp4xx/gateway7001-pci.c + * -+ * Gateway 7001 board-level PCI initialization ++ * PCI setup routines for Gateway 7001 + * -+ * Copyright (c) 2006 Imre Kaloz ++ * Copyright (C) 2006 Imre Kaloz + * -+ * based on ixdp425-pci.c: -+ * Copyright (C) 2002 Intel Corporation. -+ * Copyright (C) 2003-2004 MontaVista Software, Inc. ++ * based on coyote-pci.c: ++ * Copyright (C) 2002 Jungo Software Technologies. ++ * Copyright (C) 2003 MontaVista Softwrae, Inc. + * + * Maintainer: Imre Kaloz + * @@ -48,52 +37,43 @@ diff -Nur linux-2.6.16.4/arch/arm/mach-ixp4xx/gateway7001-pci.c linux-2.6.16.4-o + */ + +#include -+#include +#include +#include -+#include + -+#include -+#include -+#include +#include ++#include ++#include ++ ++#include ++ ++extern void ixp4xx_pci_preinit(void); ++extern int ixp4xx_setup(int nr, struct pci_sys_data *sys); ++extern struct pci_bus *ixp4xx_scan_bus(int nr, struct pci_sys_data *sys); + +void __init gateway7001_pci_preinit(void) +{ -+ set_irq_type(IRQ_GATEWAY7001_PCI_INTA, IRQT_LOW); -+ set_irq_type(IRQ_GATEWAY7001_PCI_INTB, IRQT_LOW); -+ set_irq_type(IRQ_GATEWAY7001_PCI_INTC, IRQT_LOW); -+ set_irq_type(IRQ_GATEWAY7001_PCI_INTD, IRQT_LOW); ++ set_irq_type(IRQ_IXP4XX_GPIO10, IRQT_LOW); ++ set_irq_type(IRQ_IXP4XX_GPIO11, IRQT_LOW); + + ixp4xx_pci_preinit(); +} + +static int __init gateway7001_map_irq(struct pci_dev *dev, u8 slot, u8 pin) +{ -+ static int pci_irq_table[GATEWAY7001_PCI_IRQ_LINES] = { -+ IRQ_GATEWAY7001_PCI_INTA, -+ IRQ_GATEWAY7001_PCI_INTB, -+ IRQ_GATEWAY7001_PCI_INTC, -+ IRQ_GATEWAY7001_PCI_INTD -+ }; -+ -+ int irq = -1; -+ -+ if (slot >= 1 && slot <= GATEWAY7001_PCI_MAX_DEV && -+ pin >= 1 && pin <= GATEWAY7001_PCI_IRQ_LINES) { -+ irq = pci_irq_table[(slot + pin - 2) % 4]; -+ } -+ -+ return irq; ++ if (slot == 0) ++ return IRQ_IXP4XX_GPIO10; ++ else if (slot == 1) ++ return IRQ_IXP4XX_GPIO11; ++ else return -1; +} + +struct hw_pci gateway7001_pci __initdata = { + .nr_controllers = 1, -+ .preinit = gateway7001_pci_preinit, -+ .swizzle = pci_std_swizzle, -+ .setup = ixp4xx_setup, -+ .scan = ixp4xx_scan_bus, -+ .map_irq = gateway7001_map_irq, ++ .preinit = gateway7001_pci_preinit, ++ .swizzle = pci_std_swizzle, ++ .setup = ixp4xx_setup, ++ .scan = ixp4xx_scan_bus, ++ .map_irq = gateway7001_map_irq, +}; + +int __init gateway7001_pci_init(void) @@ -104,134 +84,63 @@ diff -Nur linux-2.6.16.4/arch/arm/mach-ixp4xx/gateway7001-pci.c linux-2.6.16.4-o +} + +subsys_initcall(gateway7001_pci_init); +diff -Nur linux-2.6.16.4/arch/arm/mach-ixp4xx/Kconfig linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/Kconfig +--- linux-2.6.16.4/arch/arm/mach-ixp4xx/Kconfig 2006-04-11 19:19:28.000000000 +0200 ++++ linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/Kconfig 2006-04-16 15:58:37.000000000 +0200 +@@ -30,6 +30,13 @@ + Engineering Coyote Gateway Reference Platform. For more + information on this platform, see . + ++config MACH_GATEWAY7001 ++ bool "Gateway 7001" ++ help ++ Say 'Y' here if you want your kernel to support Gateway's ++ 7001 Access Point. For more information on this platform, ++ see http://openwrt.org + -diff -Nur linux-2.6.16.4/arch/arm/mach-ixp4xx/gateway7001-setup.c linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c ---- linux-2.6.16.4/arch/arm/mach-ixp4xx/gateway7001-setup.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/gateway7001-setup.c 2006-04-12 22:45:53.000000000 +0200 -@@ -0,0 +1,136 @@ -+/* -+ * arch/arm/mach-ixp4xx/gateway7001-setup.c -+ * -+ * Gateway 7001 board-setup -+ * -+ * Copyright (C) 2006 Imre Kaloz -+ * -+ * based-on ixdp425-setup.c: -+ * Copyright (C) 2003-2005 MontaVista Software, Inc. -+ * -+ * Author: Imre Kaloz -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+static struct flash_platform_data gateway7001_flash_data = { -+ .map_name = "cfi_probe", -+ .width = 2, -+}; -+ -+static struct resource gateway7001_flash_resource = { -+ .flags = IORESOURCE_MEM, -+}; -+ -+static struct platform_device gateway7001_flash = { -+ .name = "IXP4XX-Flash", -+ .id = 0, -+ .dev = { -+ .platform_data = &gateway7001_flash_data, -+ }, -+ .num_resources = 1, -+ .resource = &gateway7001_flash_resource, -+}; -+ -+static struct ixp4xx_i2c_pins gateway7001_i2c_gpio_pins = { -+ .sda_pin = GATEWAY7001_SDA_PIN, -+ .scl_pin = GATEWAY7001_SCL_PIN, -+}; -+ -+static struct platform_device gateway7001_i2c_controller = { -+ .name = "IXP4XX-I2C", -+ .id = 0, -+ .dev = { -+ .platform_data = &gateway7001_i2c_gpio_pins, -+ }, -+ .num_resources = 0 -+}; -+ -+static struct resource gateway7001_uart_resources[] = { -+ { -+ .start = IXP4XX_UART1_BASE_PHYS, -+ .end = IXP4XX_UART1_BASE_PHYS + 0x0fff, -+ .flags = IORESOURCE_MEM -+ }, -+ { -+ .start = IXP4XX_UART2_BASE_PHYS, -+ .end = IXP4XX_UART2_BASE_PHYS + 0x0fff, -+ .flags = IORESOURCE_MEM -+ } -+}; -+ -+static struct plat_serial8250_port gateway7001_uart_data[] = { -+ { -+ .mapbase = IXP4XX_UART1_BASE_PHYS, -+ .membase = (char *)IXP4XX_UART1_BASE_VIRT + REG_OFFSET, -+ .irq = IRQ_IXP4XX_UART1, -+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, -+ .iotype = UPIO_MEM, -+ .regshift = 2, -+ .uartclk = IXP4XX_UART_XTAL, -+ }, -+ { -+ .mapbase = IXP4XX_UART2_BASE_PHYS, -+ .membase = (char *)IXP4XX_UART2_BASE_VIRT + REG_OFFSET, -+ .irq = IRQ_IXP4XX_UART2, -+ .flags = UPF_BOOT_AUTOCONF | UPF_SKIP_TEST, -+ .iotype = UPIO_MEM, -+ .regshift = 2, -+ .uartclk = IXP4XX_UART_XTAL, -+ }, -+ { }, -+}; -+ -+static struct platform_device gateway7001_uart = { -+ .name = "serial8250", -+ .id = PLAT8250_DEV_PLATFORM, -+ .dev.platform_data = gateway7001_uart_data, -+ .num_resources = 2, -+ .resource = gateway7001_uart_resources -+}; -+ -+static struct platform_device *gateway7001_devices[] __initdata = { -+ &gateway7001_i2c_controller, -+ &gateway7001_flash, -+ &gateway7001_uart -+}; -+ -+static void __init gateway7001_init(void) -+{ -+ ixp4xx_sys_init(); -+ -+ gateway7001_flash_resource.start = IXP4XX_EXP_BUS_BASE(0); -+ gateway7001_flash_resource.end = -+ IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1; -+ -+ platform_add_devices(gateway7001_devices, ARRAY_SIZE(gateway7001_devices)); -+} -+ + config ARCH_IXDP425 + bool "IXDP425" + help +diff -Nur linux-2.6.16.4/arch/arm/mach-ixp4xx/Makefile linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/Makefile +--- linux-2.6.16.4/arch/arm/mach-ixp4xx/Makefile 2006-04-11 19:19:28.000000000 +0200 ++++ linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/Makefile 2006-04-16 16:03:42.000000000 +0200 +@@ -10,4 +10,5 @@ + obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o gtwx5715-setup.o + obj-$(CONFIG_MACH_NSLU2) += nslu2-pci.o nslu2-setup.o nslu2-power.o + obj-$(CONFIG_MACH_NAS100D) += nas100d-pci.o nas100d-setup.o nas100d-power.o ++obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o coyote-setup.o + +diff -Nur linux-2.6.16.4/include/asm-arm/arch-ixp4xx/uncompress.h linux-2.6.16.4-owrt/include/asm-arm/arch-ixp4xx/uncompress.h +--- linux-2.6.16.4/include/asm-arm/arch-ixp4xx/uncompress.h 2006-04-11 19:19:28.000000000 +0200 ++++ linux-2.6.16.4-owrt/include/asm-arm/arch-ixp4xx/uncompress.h 2006-04-16 16:25:34.000000000 +0200 +@@ -48,7 +48,7 @@ + /* + * Coyote and gtwx5715 only have UART2 connected + */ +- if (machine_is_adi_coyote() || machine_is_gtwx5715()) ++ if (machine_is_adi_coyote() || machine_is_gtwx5715() || machine_is_gateway7001()) + uart_base = (volatile u32*) IXP4XX_UART2_BASE_PHYS; + else + uart_base = (volatile u32*) IXP4XX_UART1_BASE_PHYS; +diff -Nur linux-2.6.16.4/arch/arm/mach-ixp4xx/coyote-setup.c linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/coyote-setup.c +--- linux-2.6.16.4/arch/arm/mach-ixp4xx/coyote-setup.c 2006-04-11 19:19:28.000000000 +0200 ++++ linux-2.6.16.4-owrt/arch/arm/mach-ixp4xx/coyote-setup.c 2006-04-16 16:03:23.000000000 +0200 +@@ -1,9 +1,10 @@ + /* + * arch/arm/mach-ixp4xx/coyote-setup.c + * +- * Board setup for ADI Engineering and IXDGP425 boards ++ * Board setup for ADI Engineering, IXDGP425 and Gateway 7001 boards + * + * Copyright (C) 2003-2005 MontaVista Software, Inc. ++ * Copyright (C) 2006 Imre Kaloz + * + * Author: Deepak Saxena + */ +@@ -111,6 +112,19 @@ + MACHINE_END + #endif + +#ifdef CONFIG_MACH_GATEWAY7001 +MACHINE_START(GATEWAY7001, "Gateway 7001") + /* Maintainer: Imre Kaloz */ @@ -241,73 +150,10 @@ diff -Nur linux-2.6.16.4/arch/arm/mach-ixp4xx/gateway7001-setup.c linux-2.6.16.4 + .init_irq = ixp4xx_init_irq, + .timer = &ixp4xx_timer, + .boot_params = 0x0100, -+ .init_machine = gateway7001_init, ++ .init_machine = coyote_init, +MACHINE_END +#endif + -diff -Nur linux-2.6.16.4/include/asm-arm/arch-ixp4xx/gateway7001.h linux-2.6.16.4-owrt/include/asm-arm/arch-ixp4xx/gateway7001.h ---- linux-2.6.16.4/include/asm-arm/arch-ixp4xx/gateway7001.h 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.16.4-owrt/include/asm-arm/arch-ixp4xx/gateway7001.h 2006-04-12 22:34:43.000000000 +0200 -@@ -0,0 +1,36 @@ -+/* -+ * include/asm-arm/arch-ixp4xx/gateway7001.h -+ * -+ * Gateway 7001 platform specific definitions -+ * -+ * Author: Imre Kaloz -+ * -+ * Copyright 2006 (c) Imre Kaloz -+ * -+ * based on ixdp425.h: -+ * Copyright 2004 (c) MontaVista, Software, Inc. -+ * -+ * This file is licensed under the terms of the GNU General Public -+ * License version 2. This program is licensed "as is" without any -+ * warranty of any kind, whether express or implied. -+ */ -+ -+#ifndef __ASM_ARCH_HARDWARE_H__ -+#error "Do not include this directly, instead #include " -+#endif -+ -+#define GATEWAY7001_SDA_PIN 7 -+#define GATEWAY7001_SCL_PIN 6 -+ -+/* -+ * GATEWAY7001 PCI IRQs -+ */ -+#define GATEWAY7001_PCI_MAX_DEV 4 -+#define GATEWAY7001_PCI_IRQ_LINES 4 -+ -+ -+/* PCI controller GPIO to IRQ pin mappings */ -+#define GATEWAY7001_PCI_INTA_PIN 11 -+#define GATEWAY7001_PCI_INTB_PIN 10 -+#define GATEWAY7001_PCI_INTC_PIN 9 -+#define GATEWAY7001_PCI_INTD_PIN 8 -diff -Nur linux-2.6.16.4/include/asm-arm/arch-ixp4xx/hardware.h linux-2.6.16.4-owrt/include/asm-arm/arch-ixp4xx/hardware.h ---- linux-2.6.16.4/include/asm-arm/arch-ixp4xx/hardware.h 2006-04-11 19:19:28.000000000 +0200 -+++ linux-2.6.16.4-owrt/include/asm-arm/arch-ixp4xx/hardware.h 2006-04-12 22:34:52.000000000 +0200 -@@ -46,5 +46,6 @@ - #include "prpmc1100.h" - #include "nslu2.h" - #include "nas100d.h" -+#include "gateway7001.h" - - #endif /* _ASM_ARCH_HARDWARE_H */ -diff -Nur linux-2.6.16.4/include/asm-arm/arch-ixp4xx/irqs.h linux-2.6.16.4-owrt/include/asm-arm/arch-ixp4xx/irqs.h ---- linux-2.6.16.4/include/asm-arm/arch-ixp4xx/irqs.h 2006-04-11 19:19:28.000000000 +0200 -+++ linux-2.6.16.4-owrt/include/asm-arm/arch-ixp4xx/irqs.h 2006-04-12 22:35:05.000000000 +0200 -@@ -109,4 +109,12 @@ - #define IRQ_NAS100D_PCI_INTD IRQ_IXP4XX_GPIO8 - #define IRQ_NAS100D_PCI_INTE IRQ_IXP4XX_GPIO7 - -+/* -+ * GATEWAY7001 board IRQs -+ */ -+#define IRQ_GATEWAY7001_PCI_INTA IRQ_IXP4XX_GPIO11 -+#define IRQ_GATEWAY7001_PCI_INTB IRQ_IXP4XX_GPIO10 -+#define IRQ_GATEWAY7001_PCI_INTC IRQ_IXP4XX_GPIO9 -+#define IRQ_GATEWAY7001_PCI_INTD IRQ_IXP4XX_GPIO8 -+ - #endif + /* + * IXDPG425 is identical to Coyote except for which serial port + * is connected.