X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/b806b008065672cf155ff31b757d36b8f67cac17..f84ac6cfd839b6f21678be718ce8ab4f1e6d4ff4:/Config.in diff --git a/Config.in b/Config.in index 2efd1ce25..77eea2d60 100644 --- a/Config.in +++ b/Config.in @@ -1,3 +1,7 @@ +# Copyright (C) 2006-2009 OpenWrt.org +# +# This is free software, licensed under the GNU General Public License v2. +# See /LICENSE for more information. # mainmenu "OpenWrt Configuration" @@ -8,67 +12,69 @@ config HAVE_DOT_CONFIG source "target/Config.in" -config ALL - bool "Select all packages by default" - default n +menu "Target Images" -menuconfig DEVEL - bool "Advanced configuration options (for developers)" - default n - select BUILDOPTS - select TOOLCHAINOPTS if !NATIVE_TOOLCHAIN + menuconfig TARGET_ROOTFS_INITRAMFS + bool "ramdisk" + default y if USES_INITRAMFS + help + Embed the rootfs into the kernel (initramfs) -config BROKEN - bool "Show broken platforms / packages" if DEVEL - default n + choice + prompt "Compression" + default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ar71xx + default TARGET_INITRAMFS_COMPRESSION_LZMA if TARGET_ramips + default TARGET_INITRAMFS_COMPRESSION_NONE + depends TARGET_ROOTFS_INITRAMFS + depends !LINUX_2_6_25 + help + Select ramdisk compression. -menuconfig BUILDOPTS - bool "Build Options" if DEVEL + config TARGET_INITRAMFS_COMPRESSION_NONE + bool "none" -config AUTOREBUILD - bool - prompt "Automatic rebuild of packages" if BUILDOPTS - default y - help - Automatically rebuild packages when their files change + config TARGET_INITRAMFS_COMPRESSION_GZIP + bool "gzip" -config TAR_VERBOSITY - bool - prompt "Tar verbose" if BUILDOPTS - default n + config TARGET_INITRAMFS_COMPRESSION_BZIP2 + bool "bzip2" -config JLEVEL - int - prompt "Number of jobs to run simultaneously" if BUILDOPTS - default "1" - help - Number of jobs to run simultanesouly + config TARGET_INITRAMFS_COMPRESSION_LZMA + bool "lzma" -config CCACHE - bool - prompt "Use ccache" if BUILDOPTS - default n - help - Compiler cache; see http://ccache.samba.org/ + config TARGET_INITRAMFS_COMPRESSION_LZO + bool "lzo" + endchoice -config SOURCE_FEEDS - string - prompt "Enter here external source feeds you want to include" if BUILDOPTS - default "https://svn.openwrt.org/openwrt/packages/" - help - Separate sources with spaces : " " + comment "Root filesystem archives" -source "toolchain/Config.in" -source "target/imagebuilder/Config.in" -source "target/sdk/Config.in" + config TARGET_ROOTFS_CPIOGZ + bool "cpio.gz" + default y if USES_CPIOGZ + help + Build a compressed cpio archive of the the root filesystem -menu "Target Images" - config TARGET_ROOTFS_INITRAMFS - bool "ramdisk" + config TARGET_ROOTFS_TARGZ + bool "tar.gz" + default y if USES_TARGZ + help + Build a compressed tar archive of the the root filesystem + + comment "Root filesystem images" + + config TARGET_ROOTFS_EXT2FS + bool "ext2" + default y if USES_EXT2 + depends !TARGET_ROOTFS_INITRAMFS + help + Ext2 file system with some free space for uml images + + config TARGET_ROOTFS_ISO + bool "iso" default n - depends LINUX_2_6 + depends TARGET_ROOTFS_INITRAMFS && TARGET_x86 help - Embed the rootfs into the kernel (initramfs) + Create some bootable ISO image config TARGET_ROOTFS_JFFS2 bool "jffs2" @@ -84,31 +90,351 @@ menu "Target Images" help Build a squashfs-lzma root filesystem - config TARGET_ROOTFS_TGZ - bool "tgz" - default y if !USES_SQUASHFS && !USES_JFFS2 - depends !TARGET_ROOTFS_INITRAMFS + config TARGET_ROOTFS_UBIFS + bool "ubifs" + default y if USES_UBIFS + depends !TARGET_ROOTFS_INITRAMFS && USES_UBIFS help - Build a compressed tar archive of the the root filesystem - - config TARGET_ROOTFS_EXT2FS - bool "ext2" - default y if !USES_SQUASHFS && !USES_JFFS2 - default y if USES_EXT2 - depends !TARGET_ROOTFS_INITRAMFS + Build a ubifs root filesystem + + comment "Image Options" + + source "target/linux/*/image/Config.in" + + config TARGET_ROOTFS_PARTSIZE + int "Root filesystem partition size (in MB)" + depends X86_GRUB_IMAGES || TARGET_ROOTFS_EXT2FS || TARGET_rb532 + default 48 help - Ext2 file system with some free space for uml images + Allows you to change the root filesystem partition size + + config TARGET_ROOTFS_MAXINODE + int "Maximum number of inodes in root filesystem" + depends TARGET_ROOTFS_EXT2FS + default 6000 + help + Allows you to change the maximum number of inodes in the root filesystem + +endmenu + +menu "Global build settings" + + config ALL + bool "Select all packages by default" + default n + + comment "General build options" + + config BUILD_PATENTED + default y + bool "Compile with support for patented functionality" + help + When this option is disabled, software which provides patented functionality will not be built. + In case software provides optional support for patented functionality, + this optional support will get disabled for this package. + + config LARGEFILE + bool + prompt "Enable large file (files > 2 GB) support" + default y + help + Enable large file (files > 2 GB) support. + + config SHADOW_PASSWORDS + bool + prompt "Enable shadow password support" + default y + help + Enable shadow password support. + + config CLEAN_IPKG + bool + prompt "Remove ipkg/opkg status data files in final images" + default n + help + This removes all ipkg/opkg status data files from the target directory before building the root fs + + config COLLECT_KERNEL_DEBUG + bool + prompt "Collect kernel debug information" + select KERNEL_DEBUG_INFO + default n + help + This collects debugging symbols from the kernel and all compiled modules. + Useful for release builds, so that kernel issues can be debugged offline later. + + comment "Kernel build options" + + config KERNEL_DEBUG_FS + bool "Compile the kernel with Debug FileSystem enabled" + default y + help + debugfs is a virtual file system that kernel developers use to put + debugging files into. Enable this option to be able to read and + write to these files. + + config KERNEL_PROFILING + bool "Compile the kernel with profiling enabled" + default n + help + Enable the extended profiling support mechanisms used by profilers such + as OProfile. + + config KERNEL_KALLSYMS + bool "Compile the kernel with symbol table information" + default n + help + This will give you more information in stack traces from kernel oopses + + config KERNEL_DEBUG_KERNEL + bool + default n + + config KERNEL_DEBUG_INFO + bool "Compile the kernel with debug information" + default n + select KERNEL_DEBUG_KERNEL + help + This will compile your kernel and modules with debug information. + + config KERNEL_DEBUG_LL + bool + default n + depends on arm + help + ARM low level debugging + + config KERNEL_EARLY_PRINTK + bool "Compile the kernel with early printk" + default n + depends on arm + select KERNEL_DEBUG_KERNEL + select KERNEL_DEBUG_LL if arm + help + Compile the kernel with early printk support. + This is only useful for debugging purposes to send messages + over the serial console in early boot. + Enable this to debug early boot problems. + + comment "Package build options" + + config DEBUG + bool + prompt "Compile packages with debugging info" + default n + help + Adds -g3 to the CFLAGS + + config IPV6 + bool + prompt "Enable IPv6 support in packages" + default y + help + Enable IPV6 support in packages (passes --enable-ipv6 to configure scripts). + + config PKG_BUILD_PARALLEL + bool + prompt "Compile certain packages parallelized" + default n + help + This adds a -jX option to certain packages that are known to + behave well for parallel build. + + Note that this may overcommit CPU resources depending on the + -j level of the main make process, the number of package + submake jobs selected below and the number of actual CPUs present. + Example: If the main make is passed a -j4 and the submake -j + is also set to 4, we may end up with 16 parallel make processes + in the worst case. + + You get maximum build performance, if you set the package build + jobs to the number of CPUs (cores) available and also start the main + make process with -jX, where X is the number of CPUs (cores). + However, make sure you have enough RAM available for + NR_CPUS to the power of two (NR_CPUS^2) make jobs. + + If you are unsure, select N. + + config PKG_BUILD_JOBS + int + prompt "Number of package submake jobs (2-512)" + range 2 512 + default 2 + depends on PKG_BUILD_PARALLEL + help + The number of jobs (-jX) to pass to packages submake. + + config PKG_DEFAULT_PARALLEL + bool + prompt "Parallelize the default package build rule (May break build)" + depends on PKG_BUILD_PARALLEL + default n + help + Always set the default package build rules to parallel build. + + WARNING: This may break build or kill your cat, as it builds + packages with multiple jobs that are probably not tested in + a parallel build environment. + + Only say Y, if you don't mind fixing broken packages. + Before reporting build bugs, set this to N and re-run the build. + + config TOOLCHAIN_PARALLEL + bool + prompt "Parallelize the toolchain build (May break build)" + depends on PKG_BUILD_PARALLEL + default n + help + Build the toolchain with parallel make jobs. + This speeds up the toolchain build on SMP machines, but may + break the build for certain toolchain versions. + + If you say Y, toolchain build might break. + Before reporting build bugs, set this to N and re-run the build. + + comment "Stripping options" + + choice + prompt "Binary stripping method" + default USE_STRIP if EXTERNAL_TOOLCHAIN + default USE_STRIP if USE_GLIBC || USE_EGLIBC + default USE_SSTRIP + help + Select the binary stripping method you wish to use. + + config NO_STRIP + bool "none" + help + This will install unstripped binaries (useful for native compiling/debugging) + + config USE_STRIP + bool "strip" + help + This will install binaries stripped using strip from binutils -comment "Image Options" -source "target/linux/*/image/Config.in" + config USE_SSTRIP + bool "sstrip" + depends !DEBUG + depends !USE_GLIBC + depends !USE_EGLIBC + help + This will install binaries stripped using sstrip + endchoice - config TARGET_ROOTFS_FSPART - int "Filesystem part size (in MB)" - depends X86_GRUB_IMAGES || TARGET_ROOTFS_EXT2FS - default 16 + config STRIP_ARGS + string + prompt "Strip arguments" + depends USE_STRIP + default "--strip-unneeded --remove-section=.comment --remove-section=.note" if DEBUG + default "--strip-all" + help + Specifies arguments passed to the strip command when stripping binaries + + config STRIP_KERNEL_EXPORTS + bool "Strip unnecessary exports from the kernel image" + help + Reduces kernel size by stripping unused kernel exports from the kernel image + Note that this might make the kernel incompatible with any kernel modules that + were not selected at the time the kernel image was created + + config USE_MKLIBS + bool "Strip unnecessary functions from libraries" + help + Reduces libraries to only those functions that are necessary for using all + selected packages (including those selected as ) + Note that this will make the system libraries incompatible with most of the packages + that are not selected during the build process endmenu -source "tmp/.config.in" +menuconfig DEVEL + bool "Advanced configuration options (for developers)" + default n + + config BROKEN + bool "Show broken platforms / packages" if DEVEL + default n + + config DOWNLOAD_FOLDER + string "Download folder" if DEVEL + default "" + + config LOCALMIRROR + string "Local mirror for source packages" if DEVEL + default "" + + config AUTOREBUILD + bool "Automatic rebuild of packages" if DEVEL + default y + help + Automatically rebuild packages when their files change + + config BUILD_SUFFIX + string "Build suffix to append to the BUILD_DIR variable" if DEVEL + default "" + help + Build suffix to append to the BUILD_DIR variable, i.e: build_dir_suffix + + config TARGET_ROOTFS_DIR + string "Override the default TARGET_ROOTFS_DIR variable" if DEVEL + default "" + help + Override the default TARGET_ROOTFS_DIR variable content $(BUILD_DIR) with custom path. + Use this option to re-define the location of the target root file system directory. + + config CCACHE + bool "Use ccache" if DEVEL + default n + help + Compiler cache; see http://ccache.samba.org/ + + config EXTERNAL_KERNEL_TREE + string "Use external kernel tree" if DEVEL + default "" + + config KERNEL_GIT_CLONE_URI + string "Enter git repository to clone" if DEVEL + default "" + help + Enter the full git repository path i.e.: + git://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux-2.6.git + This will create a git clone of the kernel in your build + directory. + + config KERNEL_GIT_LOCAL_REPOSITORY + string "Enter path to local reference repository" if DEVEL + default "" + help + Enter a full pathname to a local reference git repository. + In this instance, the --refererence option of git clone will + be used thus creating a quick local clone of your repo. + +menuconfig TARGET_OPTIONS + bool "Target Options" if DEVEL + + config TARGET_OPTIMIZATION + string "Target Optimizations" if TARGET_OPTIONS + default DEFAULT_TARGET_OPTIMIZATION + help + Optimizations to use when building for the target host. + + config SOFT_FLOAT + bool "Use software floating point by default" if TARGET_OPTIONS + default y + depends on (arm || armeb || powerpc || mipsel || mips) && !HAS_FPU + help + If your target CPU does not have a Floating Point Unit (FPU) or a + kernel FPU emulator, but you still wish to support floating point + functions, then everything will need to be compiled with soft floating + point support (-msoft-float). + + Most people will answer N. + +source "toolchain/Config.in" + +source "target/imagebuilder/Config.in" +source "target/sdk/Config.in" +source "target/toolchain/Config.in" +source "tmp/.config-package.in"