X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/c5552ad03973839d83d32d7108f20c00f192633b..c01dd82e04c7c37dd4f5b609bcc2de2607030a23:/target/linux/generic/patches-2.6.30/941-ssb_update.patch?ds=sidebyside diff --git a/target/linux/generic/patches-2.6.30/941-ssb_update.patch b/target/linux/generic/patches-2.6.30/941-ssb_update.patch index 391fbba87..3b54067d7 100644 --- a/target/linux/generic/patches-2.6.30/941-ssb_update.patch +++ b/target/linux/generic/patches-2.6.30/941-ssb_update.patch @@ -1,6 +1,198 @@ +--- a/drivers/ssb/Kconfig ++++ b/drivers/ssb/Kconfig +@@ -66,6 +66,20 @@ config SSB_PCMCIAHOST + + If unsure, say N + ++config SSB_SDIOHOST_POSSIBLE ++ bool ++ depends on SSB && (MMC = y || MMC = SSB) ++ default y ++ ++config SSB_SDIOHOST ++ bool "Support for SSB on SDIO-bus host" ++ depends on SSB_SDIOHOST_POSSIBLE ++ help ++ Support for a Sonics Silicon Backplane on top ++ of a SDIO device. ++ ++ If unsure, say N ++ + config SSB_SILENT + bool "No SSB kernel messages" + depends on SSB && EMBEDDED +--- a/drivers/ssb/Makefile ++++ b/drivers/ssb/Makefile +@@ -6,6 +6,7 @@ ssb-$(CONFIG_SSB_SPROM) += sprom.o + # host support + ssb-$(CONFIG_SSB_PCIHOST) += pci.o pcihost_wrapper.o + ssb-$(CONFIG_SSB_PCMCIAHOST) += pcmcia.o ++ssb-$(CONFIG_SSB_SDIOHOST) += sdio.o + + # built-in drivers + ssb-y += driver_chipcommon.o +--- a/drivers/ssb/b43_pci_bridge.c ++++ b/drivers/ssb/b43_pci_bridge.c +@@ -24,6 +24,7 @@ static const struct pci_device_id b43_pc + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4312) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4315) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4318) }, ++ { PCI_DEVICE(PCI_VENDOR_ID_BCM_GVC, 0x4318) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4319) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4320) }, + { PCI_DEVICE(PCI_VENDOR_ID_BROADCOM, 0x4321) }, +--- a/drivers/ssb/driver_chipcommon.c ++++ b/drivers/ssb/driver_chipcommon.c +@@ -46,40 +46,66 @@ void ssb_chipco_set_clockmode(struct ssb + if (!ccdev) + return; + bus = ccdev->bus; ++ ++ /* We support SLOW only on 6..9 */ ++ if (ccdev->id.revision >= 10 && mode == SSB_CLKMODE_SLOW) ++ mode = SSB_CLKMODE_DYNAMIC; ++ ++ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) ++ return; /* PMU controls clockmode, separated function needed */ ++ SSB_WARN_ON(ccdev->id.revision >= 20); ++ + /* chipcommon cores prior to rev6 don't support dynamic clock control */ + if (ccdev->id.revision < 6) + return; +- /* chipcommon cores rev10 are a whole new ball game */ ++ ++ /* ChipCommon cores rev10+ need testing */ + if (ccdev->id.revision >= 10) + return; ++ + if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL)) + return; + + switch (mode) { +- case SSB_CLKMODE_SLOW: ++ case SSB_CLKMODE_SLOW: /* For revs 6..9 only */ + tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); + tmp |= SSB_CHIPCO_SLOWCLKCTL_FSLOW; + chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); + break; + case SSB_CLKMODE_FAST: +- ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */ +- tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); +- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW; +- tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL; +- chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); ++ if (ccdev->id.revision < 10) { ++ ssb_pci_xtal(bus, SSB_GPIO_XTAL, 1); /* Force crystal on */ ++ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); ++ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW; ++ tmp |= SSB_CHIPCO_SLOWCLKCTL_IPLL; ++ chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); ++ } else { ++ chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL, ++ (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) | ++ SSB_CHIPCO_SYSCLKCTL_FORCEHT)); ++ /* udelay(150); TODO: not available in early init */ ++ } + break; + case SSB_CLKMODE_DYNAMIC: +- tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); +- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW; +- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL; +- tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL; +- if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL) +- tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL; +- chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); +- +- /* for dynamic control, we have to release our xtal_pu "force on" */ +- if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL) +- ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0); ++ if (ccdev->id.revision < 10) { ++ tmp = chipco_read32(cc, SSB_CHIPCO_SLOWCLKCTL); ++ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_FSLOW; ++ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_IPLL; ++ tmp &= ~SSB_CHIPCO_SLOWCLKCTL_ENXTAL; ++ if ((tmp & SSB_CHIPCO_SLOWCLKCTL_SRC) != ++ SSB_CHIPCO_SLOWCLKCTL_SRC_XTAL) ++ tmp |= SSB_CHIPCO_SLOWCLKCTL_ENXTAL; ++ chipco_write32(cc, SSB_CHIPCO_SLOWCLKCTL, tmp); ++ ++ /* For dynamic control, we have to release our xtal_pu ++ * "force on" */ ++ if (tmp & SSB_CHIPCO_SLOWCLKCTL_ENXTAL) ++ ssb_pci_xtal(bus, SSB_GPIO_XTAL, 0); ++ } else { ++ chipco_write32(cc, SSB_CHIPCO_SYSCLKCTL, ++ (chipco_read32(cc, SSB_CHIPCO_SYSCLKCTL) & ++ ~SSB_CHIPCO_SYSCLKCTL_FORCEHT)); ++ } + break; + default: + SSB_WARN_ON(1); +@@ -209,6 +235,24 @@ static void chipco_powercontrol_init(str + } + } + ++/* http://bcm-v4.sipsolutions.net/802.11/PmuFastPwrupDelay */ ++static u16 pmu_fast_powerup_delay(struct ssb_chipcommon *cc) ++{ ++ struct ssb_bus *bus = cc->dev->bus; ++ ++ switch (bus->chip_id) { ++ case 0x4312: ++ case 0x4322: ++ case 0x4328: ++ return 7000; ++ case 0x4325: ++ /* TODO: */ ++ default: ++ return 15000; ++ } ++} ++ ++/* http://bcm-v4.sipsolutions.net/802.11/ClkctlFastPwrupDelay */ + static void calc_fast_powerup_delay(struct ssb_chipcommon *cc) + { + struct ssb_bus *bus = cc->dev->bus; +@@ -218,6 +262,12 @@ static void calc_fast_powerup_delay(stru + + if (bus->bustype != SSB_BUSTYPE_PCI) + return; ++ ++ if (cc->capabilities & SSB_CHIPCO_CAP_PMU) { ++ cc->fast_pwrup_delay = pmu_fast_powerup_delay(cc); ++ return; ++ } ++ + if (!(cc->capabilities & SSB_CHIPCO_CAP_PCTL)) + return; + +@@ -233,6 +283,15 @@ void ssb_chipcommon_init(struct ssb_chip + { + if (!cc->dev) + return; /* We don't have a ChipCommon */ ++ if (cc->dev->id.revision >= 11) ++ cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT); ++ ssb_dprintk(KERN_INFO PFX "chipcommon status is 0x%x\n", cc->status); ++ ++ if (cc->dev->id.revision >= 20) { ++ chipco_write32(cc, SSB_CHIPCO_GPIOPULLUP, 0); ++ chipco_write32(cc, SSB_CHIPCO_GPIOPULLDOWN, 0); ++ } ++ + ssb_pmu_init(cc); + chipco_powercontrol_init(cc); + ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); +@@ -370,6 +429,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c + { + return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value); + } ++EXPORT_SYMBOL(ssb_chipco_gpio_control); + + u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value) + { --- a/drivers/ssb/driver_chipcommon_pmu.c +++ b/drivers/ssb/driver_chipcommon_pmu.c -@@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct +@@ -28,6 +28,21 @@ static void ssb_chipco_pll_write(struct chipco_write32(cc, SSB_CHIPCO_PLLCTL_DATA, value); } @@ -35,15 +227,54 @@ default: ssb_printk(KERN_ERR PFX "ERROR: PLL init unknown for device %04X\n", -@@ -402,6 +423,7 @@ static void ssb_pmu_resources_init(struc +@@ -396,12 +417,15 @@ static void ssb_pmu_resources_init(struc + u32 min_msk = 0, max_msk = 0; + unsigned int i; + const struct pmu_res_updown_tab_entry *updown_tab = NULL; +- unsigned int updown_tab_size; ++ unsigned int updown_tab_size = 0; + const struct pmu_res_depend_tab_entry *depend_tab = NULL; +- unsigned int depend_tab_size; ++ unsigned int depend_tab_size = 0; switch (bus->chip_id) { case 0x4312: ++ min_msk = 0xCBB; ++ break; + case 0x4322: /* We keep the default settings: * min_msk = 0xCBB * max_msk = 0x7FFFF -@@ -506,3 +528,82 @@ void ssb_pmu_init(struct ssb_chipcommon +@@ -480,9 +504,9 @@ static void ssb_pmu_resources_init(struc + chipco_write32(cc, SSB_CHIPCO_PMU_MAXRES_MSK, max_msk); + } + ++/* http://bcm-v4.sipsolutions.net/802.11/SSB/PmuInit */ + void ssb_pmu_init(struct ssb_chipcommon *cc) + { +- struct ssb_bus *bus = cc->dev->bus; + u32 pmucap; + + if (!(cc->capabilities & SSB_CHIPCO_CAP_PMU)) +@@ -494,15 +518,91 @@ void ssb_pmu_init(struct ssb_chipcommon + ssb_dprintk(KERN_DEBUG PFX "Found rev %u PMU (capabilities 0x%08X)\n", + cc->pmu.rev, pmucap); + +- if (cc->pmu.rev >= 1) { +- if ((bus->chip_id == 0x4325) && (bus->chip_rev < 2)) { +- chipco_mask32(cc, SSB_CHIPCO_PMU_CTL, +- ~SSB_CHIPCO_PMU_CTL_NOILPONW); +- } else { +- chipco_set32(cc, SSB_CHIPCO_PMU_CTL, +- SSB_CHIPCO_PMU_CTL_NOILPONW); +- } +- } ++ if (cc->pmu.rev == 1) ++ chipco_mask32(cc, SSB_CHIPCO_PMU_CTL, ++ ~SSB_CHIPCO_PMU_CTL_NOILPONW); ++ else ++ chipco_set32(cc, SSB_CHIPCO_PMU_CTL, ++ SSB_CHIPCO_PMU_CTL_NOILPONW); ssb_pmu_pll_init(cc); ssb_pmu_resources_init(cc); } @@ -126,1555 +357,3573 @@ + +EXPORT_SYMBOL(ssb_pmu_set_ldo_voltage); +EXPORT_SYMBOL(ssb_pmu_set_ldo_paref); ---- a/drivers/ssb/main.c -+++ b/drivers/ssb/main.c -@@ -120,6 +120,19 @@ static void ssb_device_put(struct ssb_de - put_device(dev->dev); +--- a/drivers/ssb/driver_gige.c ++++ b/drivers/ssb/driver_gige.c +@@ -12,6 +12,7 @@ + #include + #include + #include ++#include + + + /* +@@ -105,8 +106,9 @@ void gige_pcicfg_write32(struct ssb_gige + gige_write32(dev, SSB_GIGE_PCICFG + offset, value); } -+static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv) -+{ -+ if (drv) -+ get_driver(&drv->drv); -+ return drv; +-static int ssb_gige_pci_read_config(struct pci_bus *bus, unsigned int devfn, +- int reg, int size, u32 *val) ++static int __devinit ssb_gige_pci_read_config(struct pci_bus *bus, ++ unsigned int devfn, int reg, ++ int size, u32 *val) + { + struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops); + unsigned long flags; +@@ -135,8 +137,9 @@ static int ssb_gige_pci_read_config(stru + return PCIBIOS_SUCCESSFUL; + } + +-static int ssb_gige_pci_write_config(struct pci_bus *bus, unsigned int devfn, +- int reg, int size, u32 val) ++static int __devinit ssb_gige_pci_write_config(struct pci_bus *bus, ++ unsigned int devfn, int reg, ++ int size, u32 val) + { + struct ssb_gige *dev = container_of(bus->ops, struct ssb_gige, pci_ops); + unsigned long flags; +@@ -165,7 +168,8 @@ static int ssb_gige_pci_write_config(str + return PCIBIOS_SUCCESSFUL; + } + +-static int ssb_gige_probe(struct ssb_device *sdev, const struct ssb_device_id *id) ++static int __devinit ssb_gige_probe(struct ssb_device *sdev, ++ const struct ssb_device_id *id) + { + struct ssb_gige *dev; + u32 base, tmslow, tmshigh; +--- a/drivers/ssb/driver_mipscore.c ++++ b/drivers/ssb/driver_mipscore.c +@@ -49,29 +49,54 @@ static const u32 ipsflag_irq_shift[] = { + + static inline u32 ssb_irqflag(struct ssb_device *dev) + { +- return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG; ++ u32 tpsflag = ssb_read32(dev, SSB_TPSFLAG); ++ if (tpsflag) ++ return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG; ++ else ++ /* not irq supported */ ++ return 0x3f; +} + -+static inline void ssb_driver_put(struct ssb_driver *drv) ++static struct ssb_device *find_device(struct ssb_device *rdev, int irqflag) +{ -+ if (drv) -+ put_driver(&drv->drv); -+} -+ - static int ssb_device_resume(struct device *dev) - { - struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); -@@ -190,90 +203,81 @@ int ssb_bus_suspend(struct ssb_bus *bus) - EXPORT_SYMBOL(ssb_bus_suspend); ++ struct ssb_bus *bus = rdev->bus; ++ int i; ++ for (i = 0; i < bus->nr_devices; i++) { ++ struct ssb_device *dev; ++ dev = &(bus->devices[i]); ++ if (ssb_irqflag(dev) == irqflag) ++ return dev; ++ } ++ return NULL; + } - #ifdef CONFIG_SSB_SPROM --int ssb_devices_freeze(struct ssb_bus *bus) -+/** ssb_devices_freeze - Freeze all devices on the bus. -+ * -+ * After freezing no device driver will be handling a device -+ * on this bus anymore. ssb_devices_thaw() must be called after -+ * a successful freeze to reactivate the devices. -+ * -+ * @bus: The bus. -+ * @ctx: Context structure. Pass this to ssb_devices_thaw(). -+ */ -+int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx) + /* Get the MIPS IRQ assignment for a specified device. + * If unassigned, 0 is returned. ++ * If disabled, 5 is returned. ++ * If not supported, 6 is returned. + */ + unsigned int ssb_mips_irq(struct ssb_device *dev) { -- struct ssb_device *dev; -- struct ssb_driver *drv; -- int err = 0; -- int i; -- pm_message_t state = PMSG_FREEZE; -+ struct ssb_device *sdev; -+ struct ssb_driver *sdrv; -+ unsigned int i; -+ -+ memset(ctx, 0, sizeof(*ctx)); -+ ctx->bus = bus; -+ SSB_WARN_ON(bus->nr_devices > ARRAY_SIZE(ctx->device_frozen)); + struct ssb_bus *bus = dev->bus; ++ struct ssb_device *mdev = bus->mipscore.dev; + u32 irqflag; + u32 ipsflag; + u32 tmp; + unsigned int irq; -- /* First check that we are capable to freeze all devices. */ - for (i = 0; i < bus->nr_devices; i++) { -- dev = &(bus->devices[i]); -- if (!dev->dev || -- !dev->dev->driver || -- !device_is_registered(dev->dev)) -- continue; -- drv = drv_to_ssb_drv(dev->dev->driver); -- if (!drv) -+ sdev = ssb_device_get(&bus->devices[i]); -+ -+ if (!sdev->dev || !sdev->dev->driver || -+ !device_is_registered(sdev->dev)) { -+ ssb_device_put(sdev); - continue; -- if (!drv->suspend) { -- /* Nope, can't suspend this one. */ -- return -EOPNOTSUPP; - } -- } -- /* Now suspend all devices */ -- for (i = 0; i < bus->nr_devices; i++) { -- dev = &(bus->devices[i]); -- if (!dev->dev || -- !dev->dev->driver || -- !device_is_registered(dev->dev)) -- continue; -- drv = drv_to_ssb_drv(dev->dev->driver); -- if (!drv) -+ sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver)); -+ if (!sdrv || SSB_WARN_ON(!sdrv->remove)) { -+ ssb_device_put(sdev); - continue; -- err = drv->suspend(dev, state); -- if (err) { -- ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n", -- dev_name(dev->dev)); -- goto err_unwind; - } -+ sdrv->remove(sdev); -+ ctx->device_frozen[i] = 1; + irqflag = ssb_irqflag(dev); ++ if (irqflag == 0x3f) ++ return 6; + ipsflag = ssb_read32(bus->mipscore.dev, SSB_IPSFLAG); + for (irq = 1; irq <= 4; irq++) { + tmp = ((ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]); + if (tmp == irqflag) + break; } +- if (irq == 5) +- irq = 0; ++ if (irq == 5) { ++ if ((1 << irqflag) & ssb_read32(mdev, SSB_INTVEC)) ++ irq = 0; ++ } - return 0; --err_unwind: -- for (i--; i >= 0; i--) { -- dev = &(bus->devices[i]); -- if (!dev->dev || -- !dev->dev->driver || -- !device_is_registered(dev->dev)) -- continue; -- drv = drv_to_ssb_drv(dev->dev->driver); -- if (!drv) -- continue; -- if (drv->resume) -- drv->resume(dev); -- } -- return err; + return irq; } +@@ -97,25 +122,56 @@ static void set_irq(struct ssb_device *d + struct ssb_device *mdev = bus->mipscore.dev; + u32 irqflag = ssb_irqflag(dev); --int ssb_devices_thaw(struct ssb_bus *bus) -+/** ssb_devices_thaw - Unfreeze all devices on the bus. -+ * -+ * This will re-attach the device drivers and re-init the devices. -+ * -+ * @ctx: The context structure from ssb_devices_freeze() -+ */ -+int ssb_devices_thaw(struct ssb_freeze_context *ctx) - { -- struct ssb_device *dev; -- struct ssb_driver *drv; -- int err; -- int i; -+ struct ssb_bus *bus = ctx->bus; -+ struct ssb_device *sdev; -+ struct ssb_driver *sdrv; -+ unsigned int i; -+ int err, result = 0; - - for (i = 0; i < bus->nr_devices; i++) { -- dev = &(bus->devices[i]); -- if (!dev->dev || -- !dev->dev->driver || -- !device_is_registered(dev->dev)) -+ if (!ctx->device_frozen[i]) - continue; -- drv = drv_to_ssb_drv(dev->dev->driver); -- if (!drv) -+ sdev = &bus->devices[i]; ++ BUG_ON(oldirq == 6); + -+ if (SSB_WARN_ON(!sdev->dev || !sdev->dev->driver)) - continue; -- if (SSB_WARN_ON(!drv->resume)) -+ sdrv = drv_to_ssb_drv(sdev->dev->driver); -+ if (SSB_WARN_ON(!sdrv || !sdrv->probe)) - continue; -- err = drv->resume(dev); -+ -+ err = sdrv->probe(sdev, &sdev->id); - if (err) { - ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n", -- dev_name(dev->dev)); -+ dev_name(sdev->dev)); -+ result = err; - } -+ ssb_driver_put(sdrv); -+ ssb_device_put(sdev); - } + dev->irq = irq + 2; -- return 0; -+ return result; +- ssb_dprintk(KERN_INFO PFX +- "set_irq: core 0x%04x, irq %d => %d\n", +- dev->id.coreid, oldirq, irq); + /* clear the old irq */ + if (oldirq == 0) + ssb_write32(mdev, SSB_INTVEC, (~(1 << irqflag) & ssb_read32(mdev, SSB_INTVEC))); +- else ++ else if (oldirq != 5) + clear_irq(bus, oldirq); + + /* assign the new one */ + if (irq == 0) { + ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) | ssb_read32(mdev, SSB_INTVEC))); + } else { ++ u32 ipsflag = ssb_read32(mdev, SSB_IPSFLAG); ++ if ((ipsflag & ipsflag_irq_mask[irq]) != ipsflag_irq_mask[irq]) { ++ u32 oldipsflag = (ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]; ++ struct ssb_device *olddev = find_device(dev, oldipsflag); ++ if (olddev) ++ set_irq(olddev, 0); ++ } + irqflag <<= ipsflag_irq_shift[irq]; +- irqflag |= (ssb_read32(mdev, SSB_IPSFLAG) & ~ipsflag_irq_mask[irq]); ++ irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]); + ssb_write32(mdev, SSB_IPSFLAG, irqflag); + } ++ ssb_dprintk(KERN_INFO PFX ++ "set_irq: core 0x%04x, irq %d => %d\n", ++ dev->id.coreid, oldirq+2, irq+2); ++} ++ ++static void print_irq(struct ssb_device *dev, unsigned int irq) ++{ ++ int i; ++ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; ++ ssb_dprintk(KERN_INFO PFX ++ "core 0x%04x, irq :", dev->id.coreid); ++ for (i = 0; i <= 6; i++) { ++ ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" "); ++ } ++ ssb_dprintk("\n"); ++} ++ ++static void dump_irq(struct ssb_bus *bus) ++{ ++ int i; ++ for (i = 0; i < bus->nr_devices; i++) { ++ struct ssb_device *dev; ++ dev = &(bus->devices[i]); ++ print_irq(dev, ssb_mips_irq(dev)); ++ } } - #endif /* CONFIG_SSB_SPROM */ -@@ -472,6 +476,8 @@ static int ssb_devices_register(struct s - case SSB_BUSTYPE_SSB: - dev->dma_mask = &dev->coherent_dma_mask; - break; -+ default: + static void ssb_mips_serial_init(struct ssb_mipscore *mcore) +@@ -197,17 +253,23 @@ void ssb_mipscore_init(struct ssb_mipsco + + /* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */ + for (irq = 2, i = 0; i < bus->nr_devices; i++) { ++ int mips_irq; + dev = &(bus->devices[i]); +- dev->irq = ssb_mips_irq(dev) + 2; ++ mips_irq = ssb_mips_irq(dev); ++ if (mips_irq > 4) ++ dev->irq = 0; ++ else ++ dev->irq = mips_irq + 2; ++ if (dev->irq > 5) ++ continue; + switch (dev->id.coreid) { + case SSB_DEV_USB11_HOST: + /* shouldn't need a separate irq line for non-4710, most of them have a proper + * external usb controller on the pci */ + if ((bus->chip_id == 0x4710) && (irq <= 4)) { + set_irq(dev, irq++); +- break; + } +- /* fallthrough */ ++ break; + case SSB_DEV_PCI: + case SSB_DEV_ETHERNET: + case SSB_DEV_ETHERNET_GBIT: +@@ -218,8 +280,14 @@ void ssb_mipscore_init(struct ssb_mipsco + set_irq(dev, irq++); + break; + } ++ /* fallthrough */ ++ case SSB_DEV_EXTIF: ++ set_irq(dev, 0); + break; } + } ++ ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n"); ++ dump_irq(bus); - sdev->dev = dev; -@@ -1358,8 +1364,10 @@ static int __init ssb_modinit(void) - ssb_buses_lock(); - err = ssb_attach_queued_buses(); - ssb_buses_unlock(); -- if (err) -+ if (err) { - bus_unregister(&ssb_bustype); -+ goto out; -+ } + ssb_mips_serial_init(mcore); + ssb_mips_flash_detect(mcore); +--- a/drivers/ssb/driver_pcicore.c ++++ b/drivers/ssb/driver_pcicore.c +@@ -15,6 +15,11 @@ - err = b43_pci_ssb_bridge_init(); - if (err) { -@@ -1375,7 +1383,7 @@ static int __init ssb_modinit(void) - /* don't fail SSB init because of this */ - err = 0; - } + #include "ssb_private.h" + ++static u32 ssb_pcie_read(struct ssb_pcicore *pc, u32 address); ++static void ssb_pcie_write(struct ssb_pcicore *pc, u32 address, u32 data); ++static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address); ++static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device, ++ u8 address, u16 data); + + static inline + u32 pcicore_read32(struct ssb_pcicore *pc, u16 offset) +@@ -246,20 +251,12 @@ static struct pci_controller ssb_pcicore + .pci_ops = &ssb_pcicore_pciops, + .io_resource = &ssb_pcicore_io_resource, + .mem_resource = &ssb_pcicore_mem_resource, +- .mem_offset = 0x24000000, + }; + +-static u32 ssb_pcicore_pcibus_iobase = 0x100; +-static u32 ssb_pcicore_pcibus_membase = SSB_PCI_DMA; - -+out: - return err; + /* This function is called when doing a pci_enable_device(). + * We must first check if the device is a device on the PCI-core bridge. */ + int ssb_pcicore_plat_dev_init(struct pci_dev *d) + { +- struct resource *res; +- int pos, size; +- u32 *base; +- + if (d->bus->ops != &ssb_pcicore_pciops) { + /* This is not a device on the PCI-core bridge. */ + return -ENODEV; +@@ -268,27 +265,6 @@ int ssb_pcicore_plat_dev_init(struct pci + ssb_printk(KERN_INFO "PCI: Fixing up device %s\n", + pci_name(d)); + +- /* Fix up resource bases */ +- for (pos = 0; pos < 6; pos++) { +- res = &d->resource[pos]; +- if (res->flags & IORESOURCE_IO) +- base = &ssb_pcicore_pcibus_iobase; +- else +- base = &ssb_pcicore_pcibus_membase; +- res->flags |= IORESOURCE_PCI_FIXED; +- if (res->end) { +- size = res->end - res->start + 1; +- if (*base & (size - 1)) +- *base = (*base + size) & ~(size - 1); +- res->start = *base; +- res->end = res->start + size - 1; +- *base += size; +- pci_write_config_dword(d, PCI_BASE_ADDRESS_0 + (pos << 2), res->start); +- } +- /* Fix up PCI bridge BAR0 only */ +- if (d->bus->number == 0 && PCI_SLOT(d->devfn) == 0) +- break; +- } + /* Fix up interrupt lines */ + d->irq = ssb_mips_irq(extpci_core->dev) + 2; + pci_write_config_byte(d, PCI_INTERRUPT_LINE, d->irq); +@@ -338,7 +314,7 @@ int ssb_pcicore_pcibios_map_irq(const st + return ssb_mips_irq(extpci_core->dev) + 2; } - /* ssb must be initialized after PCI but before the ssb drivers. ---- a/drivers/ssb/pci.c -+++ b/drivers/ssb/pci.c -@@ -167,10 +167,16 @@ err_pci: + +-static void ssb_pcicore_init_hostmode(struct ssb_pcicore *pc) ++static void __devinit ssb_pcicore_init_hostmode(struct ssb_pcicore *pc) + { + u32 val; + +@@ -403,7 +379,7 @@ static void ssb_pcicore_init_hostmode(st + register_pci_controller(&ssb_pcicore_controller); } - /* Get the word-offset for a SSB_SPROM_XXX define. */ --#define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16)) -+#define SPOFF(offset) ((offset) / sizeof(u16)) - /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */ --#define SPEX(_outvar, _offset, _mask, _shift) \ -+#define SPEX16(_outvar, _offset, _mask, _shift) \ - out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift)) -+#define SPEX32(_outvar, _offset, _mask, _shift) \ -+ out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \ -+ in[SPOFF(_offset)]) & (_mask)) >> (_shift)) -+#define SPEX(_outvar, _offset, _mask, _shift) \ -+ SPEX16(_outvar, _offset, _mask, _shift) +-static int pcicore_is_in_hostmode(struct ssb_pcicore *pc) ++static int __devinit pcicore_is_in_hostmode(struct ssb_pcicore *pc) + { + struct ssb_bus *bus = pc->dev->bus; + u16 chipid_top; +@@ -432,25 +408,133 @@ static int pcicore_is_in_hostmode(struct + } + #endif /* CONFIG_SSB_PCICORE_HOSTMODE */ + ++/************************************************** ++ * Workarounds. ++ **************************************************/ ++ ++static void __devinit ssb_pcicore_fix_sprom_core_index(struct ssb_pcicore *pc) ++{ ++ u16 tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(0)); ++ if (((tmp & 0xF000) >> 12) != pc->dev->core_index) { ++ tmp &= ~0xF000; ++ tmp |= (pc->dev->core_index << 12); ++ pcicore_write16(pc, SSB_PCICORE_SPROM(0), tmp); ++ } ++} ++ ++static u8 ssb_pcicore_polarity_workaround(struct ssb_pcicore *pc) ++{ ++ return (ssb_pcie_read(pc, 0x204) & 0x10) ? 0xC0 : 0x80; ++} ++ ++static void ssb_pcicore_serdes_workaround(struct ssb_pcicore *pc) ++{ ++ const u8 serdes_pll_device = 0x1D; ++ const u8 serdes_rx_device = 0x1F; ++ u16 tmp; ++ ++ ssb_pcie_mdio_write(pc, serdes_rx_device, 1 /* Control */, ++ ssb_pcicore_polarity_workaround(pc)); ++ tmp = ssb_pcie_mdio_read(pc, serdes_pll_device, 1 /* Control */); ++ if (tmp & 0x4000) ++ ssb_pcie_mdio_write(pc, serdes_pll_device, 1, tmp & ~0x4000); ++} ++ ++static void ssb_pcicore_pci_setup_workarounds(struct ssb_pcicore *pc) ++{ ++ struct ssb_device *pdev = pc->dev; ++ struct ssb_bus *bus = pdev->bus; ++ u32 tmp; ++ ++ tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2); ++ tmp |= SSB_PCICORE_SBTOPCI_PREF; ++ tmp |= SSB_PCICORE_SBTOPCI_BURST; ++ pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp); + ++ if (pdev->id.revision < 5) { ++ tmp = ssb_read32(pdev, SSB_IMCFGLO); ++ tmp &= ~SSB_IMCFGLO_SERTO; ++ tmp |= 2; ++ tmp &= ~SSB_IMCFGLO_REQTO; ++ tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT; ++ ssb_write32(pdev, SSB_IMCFGLO, tmp); ++ ssb_commit_settings(bus); ++ } else if (pdev->id.revision >= 11) { ++ tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2); ++ tmp |= SSB_PCICORE_SBTOPCI_MRM; ++ pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp); ++ } ++} ++ ++static void ssb_pcicore_pcie_setup_workarounds(struct ssb_pcicore *pc) ++{ ++ u32 tmp; ++ u8 rev = pc->dev->id.revision; ++ ++ if (rev == 0 || rev == 1) { ++ /* TLP Workaround register. */ ++ tmp = ssb_pcie_read(pc, 0x4); ++ tmp |= 0x8; ++ ssb_pcie_write(pc, 0x4, tmp); ++ } ++ if (rev == 1) { ++ /* DLLP Link Control register. */ ++ tmp = ssb_pcie_read(pc, 0x100); ++ tmp |= 0x40; ++ ssb_pcie_write(pc, 0x100, tmp); ++ } ++ ++ if (rev == 0) { ++ const u8 serdes_rx_device = 0x1F; ++ ++ ssb_pcie_mdio_write(pc, serdes_rx_device, ++ 2 /* Timer */, 0x8128); ++ ssb_pcie_mdio_write(pc, serdes_rx_device, ++ 6 /* CDR */, 0x0100); ++ ssb_pcie_mdio_write(pc, serdes_rx_device, ++ 7 /* CDR BW */, 0x1466); ++ } else if (rev == 3 || rev == 4 || rev == 5) { ++ /* TODO: DLLP Power Management Threshold */ ++ ssb_pcicore_serdes_workaround(pc); ++ /* TODO: ASPM */ ++ } else if (rev == 7) { ++ /* TODO: No PLL down */ ++ } ++ ++ if (rev >= 6) { ++ /* Miscellaneous Configuration Fixup */ ++ tmp = pcicore_read16(pc, SSB_PCICORE_SPROM(5)); ++ if (!(tmp & 0x8000)) ++ pcicore_write16(pc, SSB_PCICORE_SPROM(5), ++ tmp | 0x8000); ++ } ++} - static inline u8 ssb_crc8(u8 crc, u8 data) + /************************************************** + * Generic and Clientmode operation code. + **************************************************/ + +-static void ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) ++static void __devinit ssb_pcicore_init_clientmode(struct ssb_pcicore *pc) { -@@ -247,7 +253,7 @@ static int sprom_do_read(struct ssb_bus - int i; ++ ssb_pcicore_fix_sprom_core_index(pc); ++ + /* Disable PCI interrupts. */ + ssb_write32(pc->dev, SSB_INTVEC, 0); ++ ++ /* Additional PCIe always once-executed workarounds */ ++ if (pc->dev->id.coreid == SSB_DEV_PCIE) { ++ ssb_pcicore_serdes_workaround(pc); ++ /* TODO: ASPM */ ++ /* TODO: Clock Request Update */ ++ } + } - for (i = 0; i < bus->sprom_size; i++) -- sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2)); -+ sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2)); +-void ssb_pcicore_init(struct ssb_pcicore *pc) ++void __devinit ssb_pcicore_init(struct ssb_pcicore *pc) + { + struct ssb_device *dev = pc->dev; +- struct ssb_bus *bus; - return 0; + if (!dev) + return; +- bus = dev->bus; + if (!ssb_device_is_enabled(dev)) + ssb_device_enable(dev, 0); + +@@ -475,58 +559,104 @@ static void ssb_pcie_write(struct ssb_pc + pcicore_write32(pc, 0x134, data); } -@@ -278,7 +284,7 @@ static int sprom_do_write(struct ssb_bus - ssb_printk("75%%"); - else if (i % 2) - ssb_printk("."); -- writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2)); -+ writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2)); - mmiowb(); - msleep(20); + +-static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device, +- u8 address, u16 data) ++static void ssb_pcie_mdio_set_phy(struct ssb_pcicore *pc, u8 phy) + { + const u16 mdio_control = 0x128; + const u16 mdio_data = 0x12C; + u32 v; + int i; + ++ v = (1 << 30); /* Start of Transaction */ ++ v |= (1 << 28); /* Write Transaction */ ++ v |= (1 << 17); /* Turnaround */ ++ v |= (0x1F << 18); ++ v |= (phy << 4); ++ pcicore_write32(pc, mdio_data, v); ++ ++ udelay(10); ++ for (i = 0; i < 200; i++) { ++ v = pcicore_read32(pc, mdio_control); ++ if (v & 0x100 /* Trans complete */) ++ break; ++ msleep(1); ++ } ++} ++ ++static u16 ssb_pcie_mdio_read(struct ssb_pcicore *pc, u8 device, u8 address) ++{ ++ const u16 mdio_control = 0x128; ++ const u16 mdio_data = 0x12C; ++ int max_retries = 10; ++ u16 ret = 0; ++ u32 v; ++ int i; ++ + v = 0x80; /* Enable Preamble Sequence */ + v |= 0x2; /* MDIO Clock Divisor */ + pcicore_write32(pc, mdio_control, v); + ++ if (pc->dev->id.revision >= 10) { ++ max_retries = 200; ++ ssb_pcie_mdio_set_phy(pc, device); ++ } ++ + v = (1 << 30); /* Start of Transaction */ +- v |= (1 << 28); /* Write Transaction */ ++ v |= (1 << 29); /* Read Transaction */ + v |= (1 << 17); /* Turnaround */ +- v |= (u32)device << 22; ++ if (pc->dev->id.revision < 10) ++ v |= (u32)device << 22; + v |= (u32)address << 18; +- v |= data; + pcicore_write32(pc, mdio_data, v); + /* Wait for the device to complete the transaction */ + udelay(10); +- for (i = 0; i < 10; i++) { ++ for (i = 0; i < max_retries; i++) { + v = pcicore_read32(pc, mdio_control); +- if (v & 0x100 /* Trans complete */) ++ if (v & 0x100 /* Trans complete */) { ++ udelay(10); ++ ret = pcicore_read32(pc, mdio_data); + break; ++ } + msleep(1); } -@@ -474,12 +480,14 @@ static void sprom_extract_r8(struct ssb_ + pcicore_write32(pc, mdio_control, 0); ++ return ret; + } - /* extract the MAC address */ - for (i = 0; i < 3; i++) { -- v = in[SPOFF(SSB_SPROM1_IL0MAC) + i]; -+ v = in[SPOFF(SSB_SPROM8_IL0MAC) + i]; - *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); +-static void ssb_broadcast_value(struct ssb_device *dev, +- u32 address, u32 data) ++static void ssb_pcie_mdio_write(struct ssb_pcicore *pc, u8 device, ++ u8 address, u16 data) + { +- /* This is used for both, PCI and ChipCommon core, so be careful. */ +- BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR); +- BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA); ++ const u16 mdio_control = 0x128; ++ const u16 mdio_data = 0x12C; ++ int max_retries = 10; ++ u32 v; ++ int i; + +- ssb_write32(dev, SSB_PCICORE_BCAST_ADDR, address); +- ssb_read32(dev, SSB_PCICORE_BCAST_ADDR); /* flush */ +- ssb_write32(dev, SSB_PCICORE_BCAST_DATA, data); +- ssb_read32(dev, SSB_PCICORE_BCAST_DATA); /* flush */ +-} ++ v = 0x80; /* Enable Preamble Sequence */ ++ v |= 0x2; /* MDIO Clock Divisor */ ++ pcicore_write32(pc, mdio_control, v); + +-static void ssb_commit_settings(struct ssb_bus *bus) +-{ +- struct ssb_device *dev; ++ if (pc->dev->id.revision >= 10) { ++ max_retries = 200; ++ ssb_pcie_mdio_set_phy(pc, device); ++ } + +- dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev; +- if (WARN_ON(!dev)) +- return; +- /* This forces an update of the cached registers. */ +- ssb_broadcast_value(dev, 0xFD8, 0); ++ v = (1 << 30); /* Start of Transaction */ ++ v |= (1 << 28); /* Write Transaction */ ++ v |= (1 << 17); /* Turnaround */ ++ if (pc->dev->id.revision < 10) ++ v |= (u32)device << 22; ++ v |= (u32)address << 18; ++ v |= data; ++ pcicore_write32(pc, mdio_data, v); ++ /* Wait for the device to complete the transaction */ ++ udelay(10); ++ for (i = 0; i < max_retries; i++) { ++ v = pcicore_read32(pc, mdio_control); ++ if (v & 0x100 /* Trans complete */) ++ break; ++ msleep(1); ++ } ++ pcicore_write32(pc, mdio_control, 0); + } + + int ssb_pcicore_dev_irqvecs_enable(struct ssb_pcicore *pc, +@@ -551,13 +681,13 @@ int ssb_pcicore_dev_irqvecs_enable(struc + might_sleep_if(pdev->id.coreid != SSB_DEV_PCI); + + /* Enable interrupts for this device. */ +- if (bus->host_pci && +- ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE))) { ++ if ((pdev->id.revision >= 6) || (pdev->id.coreid == SSB_DEV_PCIE)) { + u32 coremask; + + /* Calculate the "coremask" for the device. */ + coremask = (1 << dev->core_index); + ++ SSB_WARN_ON(bus->bustype != SSB_BUSTYPE_PCI); + err = pci_read_config_dword(bus->host_pci, SSB_PCI_IRQMASK, &tmp); + if (err) + goto out; +@@ -579,48 +709,10 @@ int ssb_pcicore_dev_irqvecs_enable(struc + if (pc->setup_done) + goto out; + if (pdev->id.coreid == SSB_DEV_PCI) { +- tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2); +- tmp |= SSB_PCICORE_SBTOPCI_PREF; +- tmp |= SSB_PCICORE_SBTOPCI_BURST; +- pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp); +- +- if (pdev->id.revision < 5) { +- tmp = ssb_read32(pdev, SSB_IMCFGLO); +- tmp &= ~SSB_IMCFGLO_SERTO; +- tmp |= 2; +- tmp &= ~SSB_IMCFGLO_REQTO; +- tmp |= 3 << SSB_IMCFGLO_REQTO_SHIFT; +- ssb_write32(pdev, SSB_IMCFGLO, tmp); +- ssb_commit_settings(bus); +- } else if (pdev->id.revision >= 11) { +- tmp = pcicore_read32(pc, SSB_PCICORE_SBTOPCI2); +- tmp |= SSB_PCICORE_SBTOPCI_MRM; +- pcicore_write32(pc, SSB_PCICORE_SBTOPCI2, tmp); +- } ++ ssb_pcicore_pci_setup_workarounds(pc); + } else { + WARN_ON(pdev->id.coreid != SSB_DEV_PCIE); +- //TODO: Better make defines for all these magic PCIE values. +- if ((pdev->id.revision == 0) || (pdev->id.revision == 1)) { +- /* TLP Workaround register. */ +- tmp = ssb_pcie_read(pc, 0x4); +- tmp |= 0x8; +- ssb_pcie_write(pc, 0x4, tmp); +- } +- if (pdev->id.revision == 0) { +- const u8 serdes_rx_device = 0x1F; +- +- ssb_pcie_mdio_write(pc, serdes_rx_device, +- 2 /* Timer */, 0x8128); +- ssb_pcie_mdio_write(pc, serdes_rx_device, +- 6 /* CDR */, 0x0100); +- ssb_pcie_mdio_write(pc, serdes_rx_device, +- 7 /* CDR BW */, 0x1466); +- } else if (pdev->id.revision == 1) { +- /* DLLP Link Control register. */ +- tmp = ssb_pcie_read(pc, 0x100); +- tmp |= 0x40; +- ssb_pcie_write(pc, 0x100, tmp); +- } ++ ssb_pcicore_pcie_setup_workarounds(pc); } - SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0); - SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0); - SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0); -+ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0); -+ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0); - SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A, - SSB_SPROM8_ANTAVAIL_A_SHIFT); - SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG, -@@ -490,12 +498,55 @@ static void sprom_extract_r8(struct ssb_ - SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0); - SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A, - SSB_SPROM8_ITSSI_A_SHIFT); -+ SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0); -+ SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK, -+ SSB_SPROM8_MAXP_AL_SHIFT); - SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0); - SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1, - SSB_SPROM8_GPIOA_P1_SHIFT); - SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0); - SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3, - SSB_SPROM8_GPIOB_P3_SHIFT); -+ SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0); -+ SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G, -+ SSB_SPROM8_TRI5G_SHIFT); -+ SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0); -+ SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH, -+ SSB_SPROM8_TRI5GH_SHIFT); -+ SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0); -+ SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G, -+ SSB_SPROM8_RXPO5G_SHIFT); -+ SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0); -+ SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G, -+ SSB_SPROM8_RSSISMC2G_SHIFT); -+ SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G, -+ SSB_SPROM8_RSSISAV2G_SHIFT); -+ SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G, -+ SSB_SPROM8_BXA2G_SHIFT); -+ SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0); -+ SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G, -+ SSB_SPROM8_RSSISMC5G_SHIFT); -+ SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G, -+ SSB_SPROM8_RSSISAV5G_SHIFT); -+ SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G, -+ SSB_SPROM8_BXA5G_SHIFT); -+ SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0); -+ SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0); -+ SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0); -+ SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0); -+ SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0); -+ SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0); -+ SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0); -+ SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0); -+ SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0); -+ SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0); -+ SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0); -+ SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0); -+ SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0); -+ SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0); -+ SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0); -+ SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0); -+ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); + pc->setup_done = 1; + out: +--- a/drivers/ssb/main.c ++++ b/drivers/ssb/main.c +@@ -17,6 +17,8 @@ + #include + #include + #include ++#include ++#include - /* Extract the antenna gain values. */ - SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, -@@ -549,6 +600,7 @@ static int sprom_extract(struct ssb_bus - ssb_printk(KERN_WARNING PFX "Unsupported SPROM" - " revision %d detected. Will extract" - " v1\n", out->revision); -+ out->revision = 1; - sprom_extract_r123(out, in); - } - } -@@ -568,6 +620,14 @@ static int ssb_pci_sprom_get(struct ssb_ - int err = -ENOMEM; - u16 *buf; + #include + #include +@@ -88,6 +90,25 @@ found: + } + #endif /* CONFIG_SSB_PCMCIAHOST */ -+ if (!ssb_is_sprom_available(bus)) { -+ ssb_printk(KERN_ERR PFX "No SPROM available!\n"); -+ return -ENODEV; ++#ifdef CONFIG_SSB_SDIOHOST ++struct ssb_bus *ssb_sdio_func_to_bus(struct sdio_func *func) ++{ ++ struct ssb_bus *bus; ++ ++ ssb_buses_lock(); ++ list_for_each_entry(bus, &buses, list) { ++ if (bus->bustype == SSB_BUSTYPE_SDIO && ++ bus->host_sdio == func) ++ goto found; + } ++ bus = NULL; ++found: ++ ssb_buses_unlock(); + -+ bus->sprom_offset = (bus->chipco.dev->id.revision < 31) ? -+ SSB_SPROM_BASE1 : SSB_SPROM_BASE31; ++ return bus; ++} ++#endif /* CONFIG_SSB_SDIOHOST */ + - buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); - if (!buf) - goto out; ---- a/drivers/ssb/pcmcia.c -+++ b/drivers/ssb/pcmcia.c -@@ -583,7 +583,7 @@ static int ssb_pcmcia_sprom_write_all(st - ssb_printk("."); - err = ssb_pcmcia_sprom_write(bus, i, sprom[i]); - if (err) { -- ssb_printk("\n" KERN_NOTICE PFX -+ ssb_printk(KERN_NOTICE PFX - "Failed to write to SPROM.\n"); - failed = 1; - break; -@@ -591,7 +591,7 @@ static int ssb_pcmcia_sprom_write_all(st - } - err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS); - if (err) { -- ssb_printk("\n" KERN_NOTICE PFX -+ ssb_printk(KERN_NOTICE PFX - "Could not disable SPROM write access.\n"); - failed = 1; - } -@@ -617,134 +617,140 @@ static int ssb_pcmcia_sprom_check_crc(co - } \ - } while (0) - --int ssb_pcmcia_get_invariants(struct ssb_bus *bus, -- struct ssb_init_invariants *iv) -+static int ssb_pcmcia_get_mac(struct pcmcia_device *p_dev, -+ tuple_t *tuple, -+ void *priv) + int ssb_for_each_bus_call(unsigned long data, + int (*func)(struct ssb_bus *bus, unsigned long data)) { -- tuple_t tuple; -- int res; -- unsigned char buf[32]; -+ struct ssb_sprom *sprom = priv; -+ -+ if (tuple->TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID) -+ return -EINVAL; -+ if (tuple->TupleDataLen != ETH_ALEN + 2) -+ return -EINVAL; -+ if (tuple->TupleData[1] != ETH_ALEN) -+ return -EINVAL; -+ memcpy(sprom->il0mac, &tuple->TupleData[2], ETH_ALEN); -+ return 0; -+}; -+ -+static int ssb_pcmcia_do_get_invariants(struct pcmcia_device *p_dev, -+ tuple_t *tuple, -+ void *priv) -+{ -+ struct ssb_init_invariants *iv = priv; - struct ssb_sprom *sprom = &iv->sprom; - struct ssb_boardinfo *bi = &iv->boardinfo; - const char *error_description; +@@ -120,6 +141,19 @@ static void ssb_device_put(struct ssb_de + put_device(dev->dev); + } -+ GOTO_ERROR_ON(tuple->TupleDataLen < 1, "VEN tpl < 1"); -+ switch (tuple->TupleData[0]) { -+ case SSB_PCMCIA_CIS_ID: -+ GOTO_ERROR_ON((tuple->TupleDataLen != 5) && -+ (tuple->TupleDataLen != 7), -+ "id tpl size"); -+ bi->vendor = tuple->TupleData[1] | -+ ((u16)tuple->TupleData[2] << 8); -+ break; -+ case SSB_PCMCIA_CIS_BOARDREV: -+ GOTO_ERROR_ON(tuple->TupleDataLen != 2, -+ "boardrev tpl size"); -+ sprom->board_rev = tuple->TupleData[1]; -+ break; -+ case SSB_PCMCIA_CIS_PA: -+ GOTO_ERROR_ON((tuple->TupleDataLen != 9) && -+ (tuple->TupleDataLen != 10), -+ "pa tpl size"); -+ sprom->pa0b0 = tuple->TupleData[1] | -+ ((u16)tuple->TupleData[2] << 8); -+ sprom->pa0b1 = tuple->TupleData[3] | -+ ((u16)tuple->TupleData[4] << 8); -+ sprom->pa0b2 = tuple->TupleData[5] | -+ ((u16)tuple->TupleData[6] << 8); -+ sprom->itssi_a = tuple->TupleData[7]; -+ sprom->itssi_bg = tuple->TupleData[7]; -+ sprom->maxpwr_a = tuple->TupleData[8]; -+ sprom->maxpwr_bg = tuple->TupleData[8]; -+ break; -+ case SSB_PCMCIA_CIS_OEMNAME: -+ /* We ignore this. */ -+ break; -+ case SSB_PCMCIA_CIS_CCODE: -+ GOTO_ERROR_ON(tuple->TupleDataLen != 2, -+ "ccode tpl size"); -+ sprom->country_code = tuple->TupleData[1]; -+ break; -+ case SSB_PCMCIA_CIS_ANTENNA: -+ GOTO_ERROR_ON(tuple->TupleDataLen != 2, -+ "ant tpl size"); -+ sprom->ant_available_a = tuple->TupleData[1]; -+ sprom->ant_available_bg = tuple->TupleData[1]; -+ break; -+ case SSB_PCMCIA_CIS_ANTGAIN: -+ GOTO_ERROR_ON(tuple->TupleDataLen != 2, -+ "antg tpl size"); -+ sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1]; -+ sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1]; -+ break; -+ case SSB_PCMCIA_CIS_BFLAGS: -+ GOTO_ERROR_ON((tuple->TupleDataLen != 3) && -+ (tuple->TupleDataLen != 5), -+ "bfl tpl size"); -+ sprom->boardflags_lo = tuple->TupleData[1] | -+ ((u16)tuple->TupleData[2] << 8); -+ break; -+ case SSB_PCMCIA_CIS_LEDS: -+ GOTO_ERROR_ON(tuple->TupleDataLen != 5, -+ "leds tpl size"); -+ sprom->gpio0 = tuple->TupleData[1]; -+ sprom->gpio1 = tuple->TupleData[2]; -+ sprom->gpio2 = tuple->TupleData[3]; -+ sprom->gpio3 = tuple->TupleData[4]; -+ break; -+ } -+ return -ENOSPC; /* continue with next entry */ -+ -+error: -+ ssb_printk(KERN_ERR PFX -+ "PCMCIA: Failed to fetch device invariants: %s\n", -+ error_description); -+ return -ENODEV; ++static inline struct ssb_driver *ssb_driver_get(struct ssb_driver *drv) ++{ ++ if (drv) ++ get_driver(&drv->drv); ++ return drv; +} + -+ -+int ssb_pcmcia_get_invariants(struct ssb_bus *bus, -+ struct ssb_init_invariants *iv) ++static inline void ssb_driver_put(struct ssb_driver *drv) +{ -+ struct ssb_sprom *sprom = &iv->sprom; -+ int res; ++ if (drv) ++ put_driver(&drv->drv); ++} + - memset(sprom, 0xFF, sizeof(*sprom)); - sprom->revision = 1; - sprom->boardflags_lo = 0; - sprom->boardflags_hi = 0; + static int ssb_device_resume(struct device *dev) + { + struct ssb_device *ssb_dev = dev_to_ssb_dev(dev); +@@ -190,90 +224,81 @@ int ssb_bus_suspend(struct ssb_bus *bus) + EXPORT_SYMBOL(ssb_bus_suspend); - /* First fetch the MAC address. */ -- memset(&tuple, 0, sizeof(tuple)); -- tuple.DesiredTuple = CISTPL_FUNCE; -- tuple.TupleData = buf; -- tuple.TupleDataMax = sizeof(buf); -- res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple); -- GOTO_ERROR_ON(res != 0, "MAC first tpl"); -- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); -- GOTO_ERROR_ON(res != 0, "MAC first tpl data"); -- while (1) { -- GOTO_ERROR_ON(tuple.TupleDataLen < 1, "MAC tpl < 1"); -- if (tuple.TupleData[0] == CISTPL_FUNCE_LAN_NODE_ID) -- break; -- res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple); -- GOTO_ERROR_ON(res != 0, "MAC next tpl"); -- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); -- GOTO_ERROR_ON(res != 0, "MAC next tpl data"); -+ res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE, -+ ssb_pcmcia_get_mac, sprom); -+ if (res != 0) { -+ ssb_printk(KERN_ERR PFX -+ "PCMCIA: Failed to fetch MAC address\n"); -+ return -ENODEV; - } -- GOTO_ERROR_ON(tuple.TupleDataLen != ETH_ALEN + 2, "MAC tpl size"); -- memcpy(sprom->il0mac, &tuple.TupleData[2], ETH_ALEN); + #ifdef CONFIG_SSB_SPROM +-int ssb_devices_freeze(struct ssb_bus *bus) ++/** ssb_devices_freeze - Freeze all devices on the bus. ++ * ++ * After freezing no device driver will be handling a device ++ * on this bus anymore. ssb_devices_thaw() must be called after ++ * a successful freeze to reactivate the devices. ++ * ++ * @bus: The bus. ++ * @ctx: Context structure. Pass this to ssb_devices_thaw(). ++ */ ++int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx) + { +- struct ssb_device *dev; +- struct ssb_driver *drv; +- int err = 0; +- int i; +- pm_message_t state = PMSG_FREEZE; ++ struct ssb_device *sdev; ++ struct ssb_driver *sdrv; ++ unsigned int i; ++ ++ memset(ctx, 0, sizeof(*ctx)); ++ ctx->bus = bus; ++ SSB_WARN_ON(bus->nr_devices > ARRAY_SIZE(ctx->device_frozen)); - /* Fetch the vendor specific tuples. */ -- memset(&tuple, 0, sizeof(tuple)); -- tuple.DesiredTuple = SSB_PCMCIA_CIS; -- tuple.TupleData = buf; -- tuple.TupleDataMax = sizeof(buf); -- res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple); -- GOTO_ERROR_ON(res != 0, "VEN first tpl"); -- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); -- GOTO_ERROR_ON(res != 0, "VEN first tpl data"); -- while (1) { -- GOTO_ERROR_ON(tuple.TupleDataLen < 1, "VEN tpl < 1"); -- switch (tuple.TupleData[0]) { -- case SSB_PCMCIA_CIS_ID: -- GOTO_ERROR_ON((tuple.TupleDataLen != 5) && -- (tuple.TupleDataLen != 7), -- "id tpl size"); -- bi->vendor = tuple.TupleData[1] | -- ((u16)tuple.TupleData[2] << 8); -- break; -- case SSB_PCMCIA_CIS_BOARDREV: -- GOTO_ERROR_ON(tuple.TupleDataLen != 2, -- "boardrev tpl size"); -- sprom->board_rev = tuple.TupleData[1]; -- break; -- case SSB_PCMCIA_CIS_PA: -- GOTO_ERROR_ON(tuple.TupleDataLen != 9, -- "pa tpl size"); -- sprom->pa0b0 = tuple.TupleData[1] | -- ((u16)tuple.TupleData[2] << 8); -- sprom->pa0b1 = tuple.TupleData[3] | -- ((u16)tuple.TupleData[4] << 8); -- sprom->pa0b2 = tuple.TupleData[5] | -- ((u16)tuple.TupleData[6] << 8); -- sprom->itssi_a = tuple.TupleData[7]; -- sprom->itssi_bg = tuple.TupleData[7]; -- sprom->maxpwr_a = tuple.TupleData[8]; -- sprom->maxpwr_bg = tuple.TupleData[8]; -- break; -- case SSB_PCMCIA_CIS_OEMNAME: -- /* We ignore this. */ -- break; -- case SSB_PCMCIA_CIS_CCODE: -- GOTO_ERROR_ON(tuple.TupleDataLen != 2, -- "ccode tpl size"); -- sprom->country_code = tuple.TupleData[1]; -- break; -- case SSB_PCMCIA_CIS_ANTENNA: -- GOTO_ERROR_ON(tuple.TupleDataLen != 2, -- "ant tpl size"); -- sprom->ant_available_a = tuple.TupleData[1]; -- sprom->ant_available_bg = tuple.TupleData[1]; -- break; -- case SSB_PCMCIA_CIS_ANTGAIN: -- GOTO_ERROR_ON(tuple.TupleDataLen != 2, -- "antg tpl size"); -- sprom->antenna_gain.ghz24.a0 = tuple.TupleData[1]; -- sprom->antenna_gain.ghz24.a1 = tuple.TupleData[1]; -- sprom->antenna_gain.ghz24.a2 = tuple.TupleData[1]; -- sprom->antenna_gain.ghz24.a3 = tuple.TupleData[1]; -- sprom->antenna_gain.ghz5.a0 = tuple.TupleData[1]; -- sprom->antenna_gain.ghz5.a1 = tuple.TupleData[1]; -- sprom->antenna_gain.ghz5.a2 = tuple.TupleData[1]; -- sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1]; -- break; -- case SSB_PCMCIA_CIS_BFLAGS: -- GOTO_ERROR_ON(tuple.TupleDataLen != 3, -- "bfl tpl size"); -- sprom->boardflags_lo = tuple.TupleData[1] | -- ((u16)tuple.TupleData[2] << 8); -- break; -- case SSB_PCMCIA_CIS_LEDS: -- GOTO_ERROR_ON(tuple.TupleDataLen != 5, -- "leds tpl size"); -- sprom->gpio0 = tuple.TupleData[1]; -- sprom->gpio1 = tuple.TupleData[2]; -- sprom->gpio2 = tuple.TupleData[3]; -- sprom->gpio3 = tuple.TupleData[4]; -- break; -- } -- res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple); -- if (res == -ENOSPC) -- break; -- GOTO_ERROR_ON(res != 0, "VEN next tpl"); -- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); -- GOTO_ERROR_ON(res != 0, "VEN next tpl data"); +- /* First check that we are capable to freeze all devices. */ + for (i = 0; i < bus->nr_devices; i++) { +- dev = &(bus->devices[i]); +- if (!dev->dev || +- !dev->dev->driver || +- !device_is_registered(dev->dev)) +- continue; +- drv = drv_to_ssb_drv(dev->dev->driver); +- if (!drv) ++ sdev = ssb_device_get(&bus->devices[i]); ++ ++ if (!sdev->dev || !sdev->dev->driver || ++ !device_is_registered(sdev->dev)) { ++ ssb_device_put(sdev); + continue; +- if (!drv->suspend) { +- /* Nope, can't suspend this one. */ +- return -EOPNOTSUPP; + } - } -+ res = pcmcia_loop_tuple(bus->host_pcmcia, SSB_PCMCIA_CIS, -+ ssb_pcmcia_do_get_invariants, sprom); -+ if ((res == 0) || (res == -ENOSPC)) -+ return 0; +- /* Now suspend all devices */ +- for (i = 0; i < bus->nr_devices; i++) { +- dev = &(bus->devices[i]); +- if (!dev->dev || +- !dev->dev->driver || +- !device_is_registered(dev->dev)) +- continue; +- drv = drv_to_ssb_drv(dev->dev->driver); +- if (!drv) ++ sdrv = ssb_driver_get(drv_to_ssb_drv(sdev->dev->driver)); ++ if (!sdrv || SSB_WARN_ON(!sdrv->remove)) { ++ ssb_device_put(sdev); + continue; +- err = drv->suspend(dev, state); +- if (err) { +- ssb_printk(KERN_ERR PFX "Failed to freeze device %s\n", +- dev_name(dev->dev)); +- goto err_unwind; + } ++ sdrv->remove(sdev); ++ ctx->device_frozen[i] = 1; + } -- return 0; --error: - ssb_printk(KERN_ERR PFX -- "PCMCIA: Failed to fetch device invariants: %s\n", -- error_description); -+ "PCMCIA: Failed to fetch device invariants\n"); - return -ENODEV; + return 0; +-err_unwind: +- for (i--; i >= 0; i--) { +- dev = &(bus->devices[i]); +- if (!dev->dev || +- !dev->dev->driver || +- !device_is_registered(dev->dev)) +- continue; +- drv = drv_to_ssb_drv(dev->dev->driver); +- if (!drv) +- continue; +- if (drv->resume) +- drv->resume(dev); +- } +- return err; } ---- a/include/linux/ssb/ssb.h -+++ b/include/linux/ssb/ssb.h -@@ -27,24 +27,54 @@ struct ssb_sprom { - u8 et1mdcport; /* MDIO for enet1 */ - u8 board_rev; /* Board revision number from SPROM. */ - u8 country_code; /* Country Code */ -- u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */ -- u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */ -+ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ -+ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ - u16 pa0b0; - u16 pa0b1; - u16 pa0b2; - u16 pa1b0; - u16 pa1b1; - u16 pa1b2; -+ u16 pa1lob0; -+ u16 pa1lob1; -+ u16 pa1lob2; -+ u16 pa1hib0; -+ u16 pa1hib1; -+ u16 pa1hib2; - u8 gpio0; /* GPIO pin 0 */ - u8 gpio1; /* GPIO pin 1 */ - u8 gpio2; /* GPIO pin 2 */ - u8 gpio3; /* GPIO pin 3 */ -- u16 maxpwr_a; /* A-PHY Amplifier Max Power (in dBm Q5.2) */ -- u16 maxpwr_bg; /* B/G-PHY Amplifier Max Power (in dBm Q5.2) */ -+ u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ -+ u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ -+ u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ -+ u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ - u8 itssi_a; /* Idle TSSI Target for A-PHY */ - u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ -- u16 boardflags_lo; /* Boardflags (low 16 bits) */ -- u16 boardflags_hi; /* Boardflags (high 16 bits) */ -+ u8 tri2g; /* 2.4GHz TX isolation */ -+ u8 tri5gl; /* 5.2GHz TX isolation */ -+ u8 tri5g; /* 5.3GHz TX isolation */ -+ u8 tri5gh; /* 5.8GHz TX isolation */ -+ u8 rxpo2g; /* 2GHz RX power offset */ -+ u8 rxpo5g; /* 5GHz RX power offset */ -+ u8 rssisav2g; /* 2GHz RSSI params */ -+ u8 rssismc2g; -+ u8 rssismf2g; -+ u8 bxa2g; /* 2GHz BX arch */ -+ u8 rssisav5g; /* 5GHz RSSI params */ -+ u8 rssismc5g; -+ u8 rssismf5g; -+ u8 bxa5g; /* 5GHz BX arch */ -+ u16 cck2gpo; /* CCK power offset */ -+ u32 ofdm2gpo; /* 2.4GHz OFDM power offset */ -+ u32 ofdm5glpo; /* 5.2GHz OFDM power offset */ -+ u32 ofdm5gpo; /* 5.3GHz OFDM power offset */ -+ u32 ofdm5ghpo; /* 5.8GHz OFDM power offset */ -+ u16 boardflags_lo; /* Board flags (bits 0-15) */ -+ u16 boardflags_hi; /* Board flags (bits 16-31) */ -+ u16 boardflags2_lo; /* Board flags (bits 32-47) */ -+ u16 boardflags2_hi; /* Board flags (bits 48-63) */ -+ /* TODO store board flags in a single u64 */ +-int ssb_devices_thaw(struct ssb_bus *bus) ++/** ssb_devices_thaw - Unfreeze all devices on the bus. ++ * ++ * This will re-attach the device drivers and re-init the devices. ++ * ++ * @ctx: The context structure from ssb_devices_freeze() ++ */ ++int ssb_devices_thaw(struct ssb_freeze_context *ctx) + { +- struct ssb_device *dev; +- struct ssb_driver *drv; +- int err; +- int i; ++ struct ssb_bus *bus = ctx->bus; ++ struct ssb_device *sdev; ++ struct ssb_driver *sdrv; ++ unsigned int i; ++ int err, result = 0; - /* Antenna gain values for up to 4 antennas - * on each band. Values in dBm/4 (Q5.2). Negative gain means the -@@ -58,7 +88,7 @@ struct ssb_sprom { - } ghz5; /* 5GHz band */ - } antenna_gain; + for (i = 0; i < bus->nr_devices; i++) { +- dev = &(bus->devices[i]); +- if (!dev->dev || +- !dev->dev->driver || +- !device_is_registered(dev->dev)) ++ if (!ctx->device_frozen[i]) + continue; +- drv = drv_to_ssb_drv(dev->dev->driver); +- if (!drv) ++ sdev = &bus->devices[i]; ++ ++ if (SSB_WARN_ON(!sdev->dev || !sdev->dev->driver)) + continue; +- if (SSB_WARN_ON(!drv->resume)) ++ sdrv = drv_to_ssb_drv(sdev->dev->driver); ++ if (SSB_WARN_ON(!sdrv || !sdrv->probe)) + continue; +- err = drv->resume(dev); ++ ++ err = sdrv->probe(sdev, &sdev->id); + if (err) { + ssb_printk(KERN_ERR PFX "Failed to thaw device %s\n", +- dev_name(dev->dev)); ++ dev_name(sdev->dev)); ++ result = err; + } ++ ssb_driver_put(sdrv); ++ ssb_device_put(sdev); + } -- /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */ -+ /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ - }; +- return 0; ++ return result; + } + #endif /* CONFIG_SSB_SPROM */ - /* Information about the PCB the circuitry is soldered on. */ -@@ -208,6 +238,7 @@ enum ssb_bustype { - SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */ - SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */ - SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */ -+ SSB_BUSTYPE_SDIO, /* SSB is connected to SDIO bus */ +@@ -360,6 +385,35 @@ static int ssb_device_uevent(struct devi + ssb_dev->id.revision); + } + ++#define ssb_config_attr(attrib, field, format_string) \ ++static ssize_t \ ++attrib##_show(struct device *dev, struct device_attribute *attr, char *buf) \ ++{ \ ++ return sprintf(buf, format_string, dev_to_ssb_dev(dev)->field); \ ++} ++ ++ssb_config_attr(core_num, core_index, "%u\n") ++ssb_config_attr(coreid, id.coreid, "0x%04x\n") ++ssb_config_attr(vendor, id.vendor, "0x%04x\n") ++ssb_config_attr(revision, id.revision, "%u\n") ++ssb_config_attr(irq, irq, "%u\n") ++static ssize_t ++name_show(struct device *dev, struct device_attribute *attr, char *buf) ++{ ++ return sprintf(buf, "%s\n", ++ ssb_core_name(dev_to_ssb_dev(dev)->id.coreid)); ++} ++ ++static struct device_attribute ssb_device_attrs[] = { ++ __ATTR_RO(name), ++ __ATTR_RO(core_num), ++ __ATTR_RO(coreid), ++ __ATTR_RO(vendor), ++ __ATTR_RO(revision), ++ __ATTR_RO(irq), ++ __ATTR_NULL, ++}; ++ + static struct bus_type ssb_bustype = { + .name = "ssb", + .match = ssb_bus_match, +@@ -369,6 +423,7 @@ static struct bus_type ssb_bustype = { + .suspend = ssb_device_suspend, + .resume = ssb_device_resume, + .uevent = ssb_device_uevent, ++ .dev_attrs = ssb_device_attrs, }; - /* board_vendor */ -@@ -238,20 +269,33 @@ struct ssb_bus { + static void ssb_buses_lock(void) +@@ -461,6 +516,7 @@ static int ssb_devices_register(struct s + #ifdef CONFIG_SSB_PCIHOST + sdev->irq = bus->host_pci->irq; + dev->parent = &bus->host_pci->dev; ++ sdev->dma_dev = dev->parent; + #endif + break; + case SSB_BUSTYPE_PCMCIA: +@@ -469,8 +525,14 @@ static int ssb_devices_register(struct s + dev->parent = &bus->host_pcmcia->dev; + #endif + break; ++ case SSB_BUSTYPE_SDIO: ++#ifdef CONFIG_SSB_SDIOHOST ++ dev->parent = &bus->host_sdio->dev; ++#endif ++ break; + case SSB_BUSTYPE_SSB: + dev->dma_mask = &dev->coherent_dma_mask; ++ sdev->dma_dev = dev; + break; + } - const struct ssb_bus_ops *ops; +@@ -497,7 +559,7 @@ error: + } -- /* The core in the basic address register window. (PCI bus only) */ -+ /* The core currently mapped into the MMIO window. -+ * Not valid on all host-buses. So don't use outside of SSB. */ - struct ssb_device *mapped_device; -- /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ -- u8 mapped_pcmcia_seg; -+ union { -+ /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ -+ u8 mapped_pcmcia_seg; -+ /* Current SSB base address window for SDIO. */ -+ u32 sdio_sbaddr; -+ }; - /* Lock for core and segment switching. - * On PCMCIA-host busses this is used to protect the whole MMIO access. */ - spinlock_t bar_lock; + /* Needs ssb_buses_lock() */ +-static int ssb_attach_queued_buses(void) ++static int __devinit ssb_attach_queued_buses(void) + { + struct ssb_bus *bus, *n; + int err = 0; +@@ -708,9 +770,9 @@ out: + return err; + } -- /* The bus this backplane is running on. */ -+ /* The host-bus this backplane is running on. */ - enum ssb_bustype bustype; -- /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */ -- struct pci_dev *host_pci; -- /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */ -- struct pcmcia_device *host_pcmcia; -+ /* Pointers to the host-bus. Check bustype before using any of these pointers. */ -+ union { -+ /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */ -+ struct pci_dev *host_pci; -+ /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */ -+ struct pcmcia_device *host_pcmcia; -+ /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */ -+ struct sdio_func *host_sdio; -+ }; +-static int ssb_bus_register(struct ssb_bus *bus, +- ssb_invariants_func_t get_invariants, +- unsigned long baseaddr) ++static int __devinit ssb_bus_register(struct ssb_bus *bus, ++ ssb_invariants_func_t get_invariants, ++ unsigned long baseaddr) + { + int err; + +@@ -724,12 +786,18 @@ static int ssb_bus_register(struct ssb_b + err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); + if (err) + goto out; + -+ /* See enum ssb_quirks */ -+ unsigned int quirks; ++ /* Init SDIO-host device (if any), before the scan */ ++ err = ssb_sdio_init(bus); ++ if (err) ++ goto err_disable_xtal; ++ + ssb_buses_lock(); + bus->busnumber = next_busnumber; + /* Scan for devices (cores) */ + err = ssb_bus_scan(bus, baseaddr); + if (err) +- goto err_disable_xtal; ++ goto err_sdio_exit; + + /* Init PCI-host device (if any) */ + err = ssb_pci_init(bus); +@@ -776,6 +844,8 @@ err_pci_exit: + ssb_pci_exit(bus); + err_unmap: + ssb_iounmap(bus); ++err_sdio_exit: ++ ssb_sdio_exit(bus); + err_disable_xtal: + ssb_buses_unlock(); + ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 0); +@@ -783,8 +853,8 @@ err_disable_xtal: + } - #ifdef CONFIG_SSB_SPROM - /* Mutex to protect the SPROM writing. */ -@@ -261,6 +305,7 @@ struct ssb_bus { - /* ID information about the Chip. */ - u16 chip_id; - u16 chip_rev; -+ u16 sprom_offset; - u16 sprom_size; /* number of words in sprom */ - u8 chip_package; + #ifdef CONFIG_SSB_PCIHOST +-int ssb_bus_pcibus_register(struct ssb_bus *bus, +- struct pci_dev *host_pci) ++int __devinit ssb_bus_pcibus_register(struct ssb_bus *bus, ++ struct pci_dev *host_pci) + { + int err; + +@@ -796,6 +866,9 @@ int ssb_bus_pcibus_register(struct ssb_b + if (!err) { + ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " + "PCI device %s\n", dev_name(&host_pci->dev)); ++ } else { ++ ssb_printk(KERN_ERR PFX "Failed to register PCI version" ++ " of SSB with error %d\n", err); + } -@@ -306,6 +351,11 @@ struct ssb_bus { - #endif /* DEBUG */ - }; + return err; +@@ -804,9 +877,9 @@ EXPORT_SYMBOL(ssb_bus_pcibus_register); + #endif /* CONFIG_SSB_PCIHOST */ + + #ifdef CONFIG_SSB_PCMCIAHOST +-int ssb_bus_pcmciabus_register(struct ssb_bus *bus, +- struct pcmcia_device *pcmcia_dev, +- unsigned long baseaddr) ++int __devinit ssb_bus_pcmciabus_register(struct ssb_bus *bus, ++ struct pcmcia_device *pcmcia_dev, ++ unsigned long baseaddr) + { + int err; -+enum ssb_quirks { -+ /* SDIO connected card requires performing a read after writing a 32-bit value */ -+ SSB_QUIRK_SDIO_READ_AFTER_WRITE32 = (1 << 0), -+}; -+ - /* The initialization-invariants. */ - struct ssb_init_invariants { - /* Versioning information about the PCB. */ -@@ -336,9 +386,18 @@ extern int ssb_bus_pcmciabus_register(st - struct pcmcia_device *pcmcia_dev, - unsigned long baseaddr); +@@ -825,9 +898,32 @@ int ssb_bus_pcmciabus_register(struct ss + EXPORT_SYMBOL(ssb_bus_pcmciabus_register); #endif /* CONFIG_SSB_PCMCIAHOST */ + +-int ssb_bus_ssbbus_register(struct ssb_bus *bus, +- unsigned long baseaddr, +- ssb_invariants_func_t get_invariants) +#ifdef CONFIG_SSB_SDIOHOST -+extern int ssb_bus_sdiobus_register(struct ssb_bus *bus, -+ struct sdio_func *sdio_func, -+ unsigned int quirks); -+#endif /* CONFIG_SSB_SDIOHOST */ ++int __devinit ssb_bus_sdiobus_register(struct ssb_bus *bus, ++ struct sdio_func *func, ++ unsigned int quirks) ++{ ++ int err; + ++ bus->bustype = SSB_BUSTYPE_SDIO; ++ bus->host_sdio = func; ++ bus->ops = &ssb_sdio_ops; ++ bus->quirks = quirks; ++ ++ err = ssb_bus_register(bus, ssb_sdio_get_invariants, ~0); ++ if (!err) { ++ ssb_printk(KERN_INFO PFX "Sonics Silicon Backplane found on " ++ "SDIO device %s\n", sdio_func_id(func)); ++ } ++ ++ return err; ++} ++EXPORT_SYMBOL(ssb_bus_sdiobus_register); ++#endif /* CONFIG_SSB_PCMCIAHOST */ ++ ++int __devinit ssb_bus_ssbbus_register(struct ssb_bus *bus, ++ unsigned long baseaddr, ++ ssb_invariants_func_t get_invariants) + { + int err; + +@@ -908,8 +1004,8 @@ u32 ssb_calc_clock_rate(u32 plltype, u32 + switch (plltype) { + case SSB_PLLTYPE_6: /* 100/200 or 120/240 only */ + if (m & SSB_CHIPCO_CLK_T6_MMASK) +- return SSB_CHIPCO_CLK_T6_M0; +- return SSB_CHIPCO_CLK_T6_M1; ++ return SSB_CHIPCO_CLK_T6_M1; ++ return SSB_CHIPCO_CLK_T6_M0; + case SSB_PLLTYPE_1: /* 48Mhz base, 3 dividers */ + case SSB_PLLTYPE_3: /* 25Mhz, 2 dividers */ + case SSB_PLLTYPE_4: /* 48Mhz, 4 dividers */ +@@ -1024,23 +1120,22 @@ static u32 ssb_tmslow_reject_bitmask(str + { + u32 rev = ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_SSBREV; + +- /* The REJECT bit changed position in TMSLOW between +- * Backplane revisions. */ ++ /* The REJECT bit seems to be different for Backplane rev 2.3 */ + switch (rev) { + case SSB_IDLOW_SSBREV_22: +- return SSB_TMSLOW_REJECT_22; ++ case SSB_IDLOW_SSBREV_24: ++ case SSB_IDLOW_SSBREV_26: ++ return SSB_TMSLOW_REJECT; + case SSB_IDLOW_SSBREV_23: + return SSB_TMSLOW_REJECT_23; +- case SSB_IDLOW_SSBREV_24: /* TODO - find the proper REJECT bits */ +- case SSB_IDLOW_SSBREV_25: /* same here */ +- case SSB_IDLOW_SSBREV_26: /* same here */ ++ case SSB_IDLOW_SSBREV_25: /* TODO - find the proper REJECT bit */ + case SSB_IDLOW_SSBREV_27: /* same here */ +- return SSB_TMSLOW_REJECT_23; /* this is a guess */ ++ return SSB_TMSLOW_REJECT; /* this is a guess */ + default: + printk(KERN_INFO "ssb: Backplane Revision 0x%.8X\n", rev); + WARN_ON(1); + } +- return (SSB_TMSLOW_REJECT_22 | SSB_TMSLOW_REJECT_23); ++ return (SSB_TMSLOW_REJECT | SSB_TMSLOW_REJECT_23); + } - extern void ssb_bus_unregister(struct ssb_bus *bus); - -+/* Does the device have an SPROM? */ -+extern bool ssb_is_sprom_available(struct ssb_bus *bus); + int ssb_device_is_enabled(struct ssb_device *dev) +@@ -1099,10 +1194,10 @@ void ssb_device_enable(struct ssb_device + } + EXPORT_SYMBOL(ssb_device_enable); + +-/* Wait for a bit in a register to get set or unset. ++/* Wait for bitmask in a register to get set or cleared. + * timeout is in units of ten-microseconds */ +-static int ssb_wait_bit(struct ssb_device *dev, u16 reg, u32 bitmask, +- int timeout, int set) ++static int ssb_wait_bits(struct ssb_device *dev, u16 reg, u32 bitmask, ++ int timeout, int set) + { + int i; + u32 val; +@@ -1110,7 +1205,7 @@ static int ssb_wait_bit(struct ssb_devic + for (i = 0; i < timeout; i++) { + val = ssb_read32(dev, reg); + if (set) { +- if (val & bitmask) ++ if ((val & bitmask) == bitmask) + return 0; + } else { + if (!(val & bitmask)) +@@ -1127,20 +1222,38 @@ static int ssb_wait_bit(struct ssb_devic + + void ssb_device_disable(struct ssb_device *dev, u32 core_specific_flags) + { +- u32 reject; ++ u32 reject, val; + + if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_RESET) + return; + + reject = ssb_tmslow_reject_bitmask(dev); +- ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK); +- ssb_wait_bit(dev, SSB_TMSLOW, reject, 1000, 1); +- ssb_wait_bit(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0); +- ssb_write32(dev, SSB_TMSLOW, +- SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | +- reject | SSB_TMSLOW_RESET | +- core_specific_flags); +- ssb_flush_tmslow(dev); + - /* Set a fallback SPROM. - * See kdoc at the function definition for complete documentation. */ - extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom); ---- a/include/linux/ssb/ssb_driver_chipcommon.h -+++ b/include/linux/ssb/ssb_driver_chipcommon.h -@@ -53,6 +53,7 @@ - #define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */ - #define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */ - #define SSB_CHIPCO_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */ -+#define SSB_CHIPCO_CAP_SPROM 0x40000000 /* SPROM present */ - #define SSB_CHIPCO_CORECTL 0x0008 - #define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ - #define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ -@@ -385,6 +386,7 @@ ++ if (ssb_read32(dev, SSB_TMSLOW) & SSB_TMSLOW_CLOCK) { ++ ssb_write32(dev, SSB_TMSLOW, reject | SSB_TMSLOW_CLOCK); ++ ssb_wait_bits(dev, SSB_TMSLOW, reject, 1000, 1); ++ ssb_wait_bits(dev, SSB_TMSHIGH, SSB_TMSHIGH_BUSY, 1000, 0); ++ ++ if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) { ++ val = ssb_read32(dev, SSB_IMSTATE); ++ val |= SSB_IMSTATE_REJECT; ++ ssb_write32(dev, SSB_IMSTATE, val); ++ ssb_wait_bits(dev, SSB_IMSTATE, SSB_IMSTATE_BUSY, 1000, ++ 0); ++ } ++ ++ ssb_write32(dev, SSB_TMSLOW, ++ SSB_TMSLOW_FGC | SSB_TMSLOW_CLOCK | ++ reject | SSB_TMSLOW_RESET | ++ core_specific_flags); ++ ssb_flush_tmslow(dev); ++ ++ if (ssb_read32(dev, SSB_IDLOW) & SSB_IDLOW_INITIATOR) { ++ val = ssb_read32(dev, SSB_IMSTATE); ++ val &= ~SSB_IMSTATE_REJECT; ++ ssb_write32(dev, SSB_IMSTATE, val); ++ } ++ } + ssb_write32(dev, SSB_TMSLOW, + reject | SSB_TMSLOW_RESET | +@@ -1155,7 +1268,10 @@ u32 ssb_dma_translation(struct ssb_devic + case SSB_BUSTYPE_SSB: + return 0; + case SSB_BUSTYPE_PCI: +- return SSB_PCI_DMA; ++ if (ssb_read32(dev, SSB_TMSHIGH) & SSB_TMSHIGH_DMA64) ++ return SSB_PCIE_DMA_H32; ++ else ++ return SSB_PCI_DMA; + default: + __ssb_dma_not_implemented(dev); + } +@@ -1272,20 +1388,20 @@ EXPORT_SYMBOL(ssb_bus_may_powerdown); - /** Chip specific Chip-Status register contents. */ -+#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS 0x00000040 /* SPROM present */ - #define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003 - #define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */ - #define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */ -@@ -398,6 +400,18 @@ - #define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4 - #define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */ + int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl) + { +- struct ssb_chipcommon *cc; + int err; + enum ssb_clkmode mode; -+/** Macros to determine SPROM presence based on Chip-Status register. */ -+#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \ -+ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ -+ SSB_CHIPCO_CHST_4325_OTP_SEL) -+#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \ -+ (status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS) -+#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \ -+ (((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ -+ SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \ -+ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ -+ SSB_CHIPCO_CHST_4325_OTP_SEL)) + err = ssb_pci_xtal(bus, SSB_GPIO_XTAL | SSB_GPIO_PLL, 1); + if (err) + goto error; +- cc = &bus->chipco; +- mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST; +- ssb_chipco_set_clockmode(cc, mode); + + #ifdef CONFIG_SSB_DEBUG + bus->powered_up = 1; + #endif ++ ++ mode = dynamic_pctl ? SSB_CLKMODE_DYNAMIC : SSB_CLKMODE_FAST; ++ ssb_chipco_set_clockmode(&bus->chipco, mode); + + return 0; + error: + ssb_printk(KERN_ERR PFX "Bus powerup failed\n"); +@@ -1293,6 +1409,37 @@ error: + } + EXPORT_SYMBOL(ssb_bus_powerup); ++static void ssb_broadcast_value(struct ssb_device *dev, ++ u32 address, u32 data) ++{ ++#ifdef CONFIG_SSB_DRIVER_PCICORE ++ /* This is used for both, PCI and ChipCommon core, so be careful. */ ++ BUILD_BUG_ON(SSB_PCICORE_BCAST_ADDR != SSB_CHIPCO_BCAST_ADDR); ++ BUILD_BUG_ON(SSB_PCICORE_BCAST_DATA != SSB_CHIPCO_BCAST_DATA); ++#endif ++ ++ ssb_write32(dev, SSB_CHIPCO_BCAST_ADDR, address); ++ ssb_read32(dev, SSB_CHIPCO_BCAST_ADDR); /* flush */ ++ ssb_write32(dev, SSB_CHIPCO_BCAST_DATA, data); ++ ssb_read32(dev, SSB_CHIPCO_BCAST_DATA); /* flush */ ++} ++ ++void ssb_commit_settings(struct ssb_bus *bus) ++{ ++ struct ssb_device *dev; ++ ++#ifdef CONFIG_SSB_DRIVER_PCICORE ++ dev = bus->chipco.dev ? bus->chipco.dev : bus->pcicore.dev; ++#else ++ dev = bus->chipco.dev; ++#endif ++ if (WARN_ON(!dev)) ++ return; ++ /* This forces an update of the cached registers. */ ++ ssb_broadcast_value(dev, 0xFD8, 0); ++} ++EXPORT_SYMBOL(ssb_commit_settings); ++ + u32 ssb_admatch_base(u32 adm) + { + u32 base = 0; +@@ -1358,8 +1505,10 @@ static int __init ssb_modinit(void) + ssb_buses_lock(); + err = ssb_attach_queued_buses(); + ssb_buses_unlock(); +- if (err) ++ if (err) { + bus_unregister(&ssb_bustype); ++ goto out; ++ } - /** Clockcontrol masks and values **/ -@@ -564,6 +578,7 @@ struct ssb_chipcommon_pmu { - struct ssb_chipcommon { - struct ssb_device *dev; - u32 capabilities; -+ u32 status; - /* Fast Powerup Delay constant */ - u16 fast_pwrup_delay; - struct ssb_chipcommon_pmu pmu; -@@ -629,5 +644,15 @@ extern int ssb_chipco_serial_init(struct - /* PMU support */ - extern void ssb_pmu_init(struct ssb_chipcommon *cc); + err = b43_pci_ssb_bridge_init(); + if (err) { +@@ -1375,7 +1524,7 @@ static int __init ssb_modinit(void) + /* don't fail SSB init because of this */ + err = 0; + } +- ++out: + return err; + } + /* ssb must be initialized after PCI but before the ssb drivers. +--- a/drivers/ssb/pci.c ++++ b/drivers/ssb/pci.c +@@ -17,6 +17,7 @@ -+enum ssb_pmu_ldo_volt_id { -+ LDO_PAREF = 0, -+ LDO_VOLT1, -+ LDO_VOLT2, -+ LDO_VOLT3, -+}; -+ -+void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc, -+ enum ssb_pmu_ldo_volt_id id, u32 voltage); -+void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on); + #include + #include ++#include + #include + #include - #endif /* LINUX_SSB_CHIPCO_H_ */ ---- a/include/linux/ssb/ssb_regs.h -+++ b/include/linux/ssb/ssb_regs.h -@@ -162,7 +162,7 @@ +@@ -167,10 +168,16 @@ err_pci: + } - /* SPROM shadow area. If not otherwise noted, fields are - * two bytes wide. Note that the SPROM can _only_ be read -- * in two-byte quantinies. -+ * in two-byte quantities. - */ - #define SSB_SPROMSIZE_WORDS 64 - #define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16)) -@@ -170,26 +170,27 @@ - #define SSB_SPROMSIZE_WORDS_R4 220 - #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16)) - #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16)) --#define SSB_SPROM_BASE 0x1000 --#define SSB_SPROM_REVISION 0x107E -+#define SSB_SPROM_BASE1 0x1000 -+#define SSB_SPROM_BASE31 0x0800 -+#define SSB_SPROM_REVISION 0x007E - #define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */ - #define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */ - #define SSB_SPROM_REVISION_CRC_SHIFT 8 + /* Get the word-offset for a SSB_SPROM_XXX define. */ +-#define SPOFF(offset) (((offset) - SSB_SPROM_BASE) / sizeof(u16)) ++#define SPOFF(offset) ((offset) / sizeof(u16)) + /* Helper to extract some _offset, which is one of the SSB_SPROM_XXX defines. */ +-#define SPEX(_outvar, _offset, _mask, _shift) \ ++#define SPEX16(_outvar, _offset, _mask, _shift) \ + out->_outvar = ((in[SPOFF(_offset)] & (_mask)) >> (_shift)) ++#define SPEX32(_outvar, _offset, _mask, _shift) \ ++ out->_outvar = ((((u32)in[SPOFF((_offset)+2)] << 16 | \ ++ in[SPOFF(_offset)]) & (_mask)) >> (_shift)) ++#define SPEX(_outvar, _offset, _mask, _shift) \ ++ SPEX16(_outvar, _offset, _mask, _shift) ++ - /* SPROM Revision 1 */ --#define SSB_SPROM1_SPID 0x1004 /* Subsystem Product ID for PCI */ --#define SSB_SPROM1_SVID 0x1006 /* Subsystem Vendor ID for PCI */ --#define SSB_SPROM1_PID 0x1008 /* Product ID for PCI */ --#define SSB_SPROM1_IL0MAC 0x1048 /* 6 bytes MAC address for 802.11b/g */ --#define SSB_SPROM1_ET0MAC 0x104E /* 6 bytes MAC address for Ethernet */ --#define SSB_SPROM1_ET1MAC 0x1054 /* 6 bytes MAC address for 802.11a */ --#define SSB_SPROM1_ETHPHY 0x105A /* Ethernet PHY settings */ -+#define SSB_SPROM1_SPID 0x0004 /* Subsystem Product ID for PCI */ -+#define SSB_SPROM1_SVID 0x0006 /* Subsystem Vendor ID for PCI */ -+#define SSB_SPROM1_PID 0x0008 /* Product ID for PCI */ -+#define SSB_SPROM1_IL0MAC 0x0048 /* 6 bytes MAC address for 802.11b/g */ -+#define SSB_SPROM1_ET0MAC 0x004E /* 6 bytes MAC address for Ethernet */ -+#define SSB_SPROM1_ET1MAC 0x0054 /* 6 bytes MAC address for 802.11a */ -+#define SSB_SPROM1_ETHPHY 0x005A /* Ethernet PHY settings */ - #define SSB_SPROM1_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ - #define SSB_SPROM1_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ - #define SSB_SPROM1_ETHPHY_ET1A_SHIFT 5 - #define SSB_SPROM1_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ - #define SSB_SPROM1_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ --#define SSB_SPROM1_BINF 0x105C /* Board info */ -+#define SSB_SPROM1_BINF 0x005C /* Board info */ - #define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */ - #define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */ - #define SSB_SPROM1_BINF_CCODE_SHIFT 8 -@@ -197,63 +198,63 @@ - #define SSB_SPROM1_BINF_ANTBG_SHIFT 12 - #define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */ - #define SSB_SPROM1_BINF_ANTA_SHIFT 14 --#define SSB_SPROM1_PA0B0 0x105E --#define SSB_SPROM1_PA0B1 0x1060 --#define SSB_SPROM1_PA0B2 0x1062 --#define SSB_SPROM1_GPIOA 0x1064 /* General Purpose IO pins 0 and 1 */ -+#define SSB_SPROM1_PA0B0 0x005E -+#define SSB_SPROM1_PA0B1 0x0060 -+#define SSB_SPROM1_PA0B2 0x0062 -+#define SSB_SPROM1_GPIOA 0x0064 /* General Purpose IO pins 0 and 1 */ - #define SSB_SPROM1_GPIOA_P0 0x00FF /* Pin 0 */ - #define SSB_SPROM1_GPIOA_P1 0xFF00 /* Pin 1 */ - #define SSB_SPROM1_GPIOA_P1_SHIFT 8 --#define SSB_SPROM1_GPIOB 0x1066 /* General Purpuse IO pins 2 and 3 */ -+#define SSB_SPROM1_GPIOB 0x0066 /* General Purpuse IO pins 2 and 3 */ - #define SSB_SPROM1_GPIOB_P2 0x00FF /* Pin 2 */ - #define SSB_SPROM1_GPIOB_P3 0xFF00 /* Pin 3 */ - #define SSB_SPROM1_GPIOB_P3_SHIFT 8 --#define SSB_SPROM1_MAXPWR 0x1068 /* Power Amplifier Max Power */ -+#define SSB_SPROM1_MAXPWR 0x0068 /* Power Amplifier Max Power */ - #define SSB_SPROM1_MAXPWR_BG 0x00FF /* B-PHY and G-PHY (in dBm Q5.2) */ - #define SSB_SPROM1_MAXPWR_A 0xFF00 /* A-PHY (in dBm Q5.2) */ - #define SSB_SPROM1_MAXPWR_A_SHIFT 8 --#define SSB_SPROM1_PA1B0 0x106A --#define SSB_SPROM1_PA1B1 0x106C --#define SSB_SPROM1_PA1B2 0x106E --#define SSB_SPROM1_ITSSI 0x1070 /* Idle TSSI Target */ -+#define SSB_SPROM1_PA1B0 0x006A -+#define SSB_SPROM1_PA1B1 0x006C -+#define SSB_SPROM1_PA1B2 0x006E -+#define SSB_SPROM1_ITSSI 0x0070 /* Idle TSSI Target */ - #define SSB_SPROM1_ITSSI_BG 0x00FF /* B-PHY and G-PHY*/ - #define SSB_SPROM1_ITSSI_A 0xFF00 /* A-PHY */ - #define SSB_SPROM1_ITSSI_A_SHIFT 8 --#define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */ --#define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */ -+#define SSB_SPROM1_BFLLO 0x0072 /* Boardflags (low 16 bits) */ -+#define SSB_SPROM1_AGAIN 0x0074 /* Antenna Gain (in dBm Q5.2) */ - #define SSB_SPROM1_AGAIN_BG 0x00FF /* B-PHY and G-PHY */ - #define SSB_SPROM1_AGAIN_BG_SHIFT 0 - #define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */ - #define SSB_SPROM1_AGAIN_A_SHIFT 8 + static inline u8 ssb_crc8(u8 crc, u8 data) + { +@@ -247,7 +254,7 @@ static int sprom_do_read(struct ssb_bus + int i; - /* SPROM Revision 2 (inherits from rev 1) */ --#define SSB_SPROM2_BFLHI 0x1038 /* Boardflags (high 16 bits) */ --#define SSB_SPROM2_MAXP_A 0x103A /* A-PHY Max Power */ -+#define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */ -+#define SSB_SPROM2_MAXP_A 0x003A /* A-PHY Max Power */ - #define SSB_SPROM2_MAXP_A_HI 0x00FF /* Max Power High */ - #define SSB_SPROM2_MAXP_A_LO 0xFF00 /* Max Power Low */ - #define SSB_SPROM2_MAXP_A_LO_SHIFT 8 --#define SSB_SPROM2_PA1LOB0 0x103C /* A-PHY PowerAmplifier Low Settings */ --#define SSB_SPROM2_PA1LOB1 0x103E /* A-PHY PowerAmplifier Low Settings */ --#define SSB_SPROM2_PA1LOB2 0x1040 /* A-PHY PowerAmplifier Low Settings */ --#define SSB_SPROM2_PA1HIB0 0x1042 /* A-PHY PowerAmplifier High Settings */ --#define SSB_SPROM2_PA1HIB1 0x1044 /* A-PHY PowerAmplifier High Settings */ --#define SSB_SPROM2_PA1HIB2 0x1046 /* A-PHY PowerAmplifier High Settings */ --#define SSB_SPROM2_OPO 0x1078 /* OFDM Power Offset from CCK Level */ -+#define SSB_SPROM2_PA1LOB0 0x003C /* A-PHY PowerAmplifier Low Settings */ -+#define SSB_SPROM2_PA1LOB1 0x003E /* A-PHY PowerAmplifier Low Settings */ -+#define SSB_SPROM2_PA1LOB2 0x0040 /* A-PHY PowerAmplifier Low Settings */ -+#define SSB_SPROM2_PA1HIB0 0x0042 /* A-PHY PowerAmplifier High Settings */ -+#define SSB_SPROM2_PA1HIB1 0x0044 /* A-PHY PowerAmplifier High Settings */ -+#define SSB_SPROM2_PA1HIB2 0x0046 /* A-PHY PowerAmplifier High Settings */ -+#define SSB_SPROM2_OPO 0x0078 /* OFDM Power Offset from CCK Level */ - #define SSB_SPROM2_OPO_VALUE 0x00FF - #define SSB_SPROM2_OPO_UNUSED 0xFF00 --#define SSB_SPROM2_CCODE 0x107C /* Two char Country Code */ -+#define SSB_SPROM2_CCODE 0x007C /* Two char Country Code */ + for (i = 0; i < bus->sprom_size; i++) +- sprom[i] = ioread16(bus->mmio + SSB_SPROM_BASE + (i * 2)); ++ sprom[i] = ioread16(bus->mmio + bus->sprom_offset + (i * 2)); - /* SPROM Revision 3 (inherits most data from rev 2) */ --#define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */ --#define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */ --#define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */ --#define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */ --#define SSB_SPROM3_GPIOLDC 0x1042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */ -+#define SSB_SPROM3_OFDMAPO 0x002C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */ -+#define SSB_SPROM3_OFDMALPO 0x0030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */ -+#define SSB_SPROM3_OFDMAHPO 0x0034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */ -+#define SSB_SPROM3_GPIOLDC 0x0042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */ - #define SSB_SPROM3_GPIOLDC_OFF 0x0000FF00 /* Off Count */ - #define SSB_SPROM3_GPIOLDC_OFF_SHIFT 8 - #define SSB_SPROM3_GPIOLDC_ON 0x00FF0000 /* On Count */ - #define SSB_SPROM3_GPIOLDC_ON_SHIFT 16 --#define SSB_SPROM3_CCKPO 0x1078 /* CCK Power Offset */ -+#define SSB_SPROM3_IL0MAC 0x004A /* 6 bytes MAC address for 802.11b/g */ -+#define SSB_SPROM3_CCKPO 0x0078 /* CCK Power Offset */ - #define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */ - #define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */ - #define SSB_SPROM3_CCKPO_2M_SHIFT 4 -@@ -264,104 +265,156 @@ - #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ + return 0; + } +@@ -278,7 +285,7 @@ static int sprom_do_write(struct ssb_bus + ssb_printk("75%%"); + else if (i % 2) + ssb_printk("."); +- writew(sprom[i], bus->mmio + SSB_SPROM_BASE + (i * 2)); ++ writew(sprom[i], bus->mmio + bus->sprom_offset + (i * 2)); + mmiowb(); + msleep(20); + } +@@ -399,6 +406,46 @@ static void sprom_extract_r123(struct ss + out->antenna_gain.ghz5.a3 = gain; + } - /* SPROM Revision 4 */ --#define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */ --#define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */ -+#define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */ -+#define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */ -+#define SSB_SPROM4_IL0MAC 0x004C /* 6 byte MAC address for a/b/g/n */ -+#define SSB_SPROM4_CCODE 0x0052 /* Country Code (2 bytes) */ -+#define SSB_SPROM4_GPIOA 0x0056 /* Gen. Purpose IO # 0 and 1 */ -+#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */ -+#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */ -+#define SSB_SPROM4_GPIOA_P1_SHIFT 8 -+#define SSB_SPROM4_GPIOB 0x0058 /* Gen. Purpose IO # 2 and 3 */ -+#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */ -+#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */ -+#define SSB_SPROM4_GPIOB_P3_SHIFT 8 -+#define SSB_SPROM4_ETHPHY 0x005A /* Ethernet PHY settings ?? */ - #define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ - #define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ - #define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5 - #define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ - #define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ --#define SSB_SPROM4_CCODE 0x1052 /* Country Code (2 bytes) */ --#define SSB_SPROM4_ANTAVAIL 0x105D /* Antenna available bitfields */ --#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */ --#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0 --#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */ --#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8 --#define SSB_SPROM4_BFLLO 0x1044 /* Boardflags (low 16 bits) */ --#define SSB_SPROM4_AGAIN01 0x105E /* Antenna Gain (in dBm Q5.2) */ -+#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */ -+#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */ -+#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0 -+#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */ -+#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8 -+#define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */ - #define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */ - #define SSB_SPROM4_AGAIN0_SHIFT 0 - #define SSB_SPROM4_AGAIN1 0xFF00 /* Antenna 1 */ - #define SSB_SPROM4_AGAIN1_SHIFT 8 --#define SSB_SPROM4_AGAIN23 0x1060 -+#define SSB_SPROM4_AGAIN23 0x0060 - #define SSB_SPROM4_AGAIN2 0x00FF /* Antenna 2 */ - #define SSB_SPROM4_AGAIN2_SHIFT 0 - #define SSB_SPROM4_AGAIN3 0xFF00 /* Antenna 3 */ - #define SSB_SPROM4_AGAIN3_SHIFT 8 --#define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */ --#define SSB_SPROM4_MAXP_BG 0x1080 /* Max Power BG in path 1 */ -+#define SSB_SPROM4_MAXP_BG 0x0080 /* Max Power BG in path 1 */ - #define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */ - #define SSB_SPROM4_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ - #define SSB_SPROM4_ITSSI_BG_SHIFT 8 --#define SSB_SPROM4_MAXP_A 0x108A /* Max Power A in path 1 */ -+#define SSB_SPROM4_MAXP_A 0x008A /* Max Power A in path 1 */ - #define SSB_SPROM4_MAXP_A_MASK 0x00FF /* Mask for Max Power A */ - #define SSB_SPROM4_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ - #define SSB_SPROM4_ITSSI_A_SHIFT 8 --#define SSB_SPROM4_GPIOA 0x1056 /* Gen. Purpose IO # 0 and 1 */ --#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */ --#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */ --#define SSB_SPROM4_GPIOA_P1_SHIFT 8 --#define SSB_SPROM4_GPIOB 0x1058 /* Gen. Purpose IO # 2 and 3 */ --#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */ --#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */ --#define SSB_SPROM4_GPIOB_P3_SHIFT 8 --#define SSB_SPROM4_PA0B0 0x1082 /* The paXbY locations are */ --#define SSB_SPROM4_PA0B1 0x1084 /* only guesses */ --#define SSB_SPROM4_PA0B2 0x1086 --#define SSB_SPROM4_PA1B0 0x108E --#define SSB_SPROM4_PA1B1 0x1090 --#define SSB_SPROM4_PA1B2 0x1092 -+#define SSB_SPROM4_PA0B0 0x0082 /* The paXbY locations are */ -+#define SSB_SPROM4_PA0B1 0x0084 /* only guesses */ -+#define SSB_SPROM4_PA0B2 0x0086 -+#define SSB_SPROM4_PA1B0 0x008E -+#define SSB_SPROM4_PA1B1 0x0090 -+#define SSB_SPROM4_PA1B2 0x0092 ++/* Revs 4 5 and 8 have partially shared layout */ ++static void sprom_extract_r458(struct ssb_sprom *out, const u16 *in) ++{ ++ SPEX(txpid2g[0], SSB_SPROM4_TXPID2G01, ++ SSB_SPROM4_TXPID2G0, SSB_SPROM4_TXPID2G0_SHIFT); ++ SPEX(txpid2g[1], SSB_SPROM4_TXPID2G01, ++ SSB_SPROM4_TXPID2G1, SSB_SPROM4_TXPID2G1_SHIFT); ++ SPEX(txpid2g[2], SSB_SPROM4_TXPID2G23, ++ SSB_SPROM4_TXPID2G2, SSB_SPROM4_TXPID2G2_SHIFT); ++ SPEX(txpid2g[3], SSB_SPROM4_TXPID2G23, ++ SSB_SPROM4_TXPID2G3, SSB_SPROM4_TXPID2G3_SHIFT); ++ ++ SPEX(txpid5gl[0], SSB_SPROM4_TXPID5GL01, ++ SSB_SPROM4_TXPID5GL0, SSB_SPROM4_TXPID5GL0_SHIFT); ++ SPEX(txpid5gl[1], SSB_SPROM4_TXPID5GL01, ++ SSB_SPROM4_TXPID5GL1, SSB_SPROM4_TXPID5GL1_SHIFT); ++ SPEX(txpid5gl[2], SSB_SPROM4_TXPID5GL23, ++ SSB_SPROM4_TXPID5GL2, SSB_SPROM4_TXPID5GL2_SHIFT); ++ SPEX(txpid5gl[3], SSB_SPROM4_TXPID5GL23, ++ SSB_SPROM4_TXPID5GL3, SSB_SPROM4_TXPID5GL3_SHIFT); ++ ++ SPEX(txpid5g[0], SSB_SPROM4_TXPID5G01, ++ SSB_SPROM4_TXPID5G0, SSB_SPROM4_TXPID5G0_SHIFT); ++ SPEX(txpid5g[1], SSB_SPROM4_TXPID5G01, ++ SSB_SPROM4_TXPID5G1, SSB_SPROM4_TXPID5G1_SHIFT); ++ SPEX(txpid5g[2], SSB_SPROM4_TXPID5G23, ++ SSB_SPROM4_TXPID5G2, SSB_SPROM4_TXPID5G2_SHIFT); ++ SPEX(txpid5g[3], SSB_SPROM4_TXPID5G23, ++ SSB_SPROM4_TXPID5G3, SSB_SPROM4_TXPID5G3_SHIFT); ++ ++ SPEX(txpid5gh[0], SSB_SPROM4_TXPID5GH01, ++ SSB_SPROM4_TXPID5GH0, SSB_SPROM4_TXPID5GH0_SHIFT); ++ SPEX(txpid5gh[1], SSB_SPROM4_TXPID5GH01, ++ SSB_SPROM4_TXPID5GH1, SSB_SPROM4_TXPID5GH1_SHIFT); ++ SPEX(txpid5gh[2], SSB_SPROM4_TXPID5GH23, ++ SSB_SPROM4_TXPID5GH2, SSB_SPROM4_TXPID5GH2_SHIFT); ++ SPEX(txpid5gh[3], SSB_SPROM4_TXPID5GH23, ++ SSB_SPROM4_TXPID5GH3, SSB_SPROM4_TXPID5GH3_SHIFT); ++} ++ + static void sprom_extract_r45(struct ssb_sprom *out, const u16 *in) + { + int i; +@@ -421,10 +468,14 @@ static void sprom_extract_r45(struct ssb + SPEX(country_code, SSB_SPROM4_CCODE, 0xFFFF, 0); + SPEX(boardflags_lo, SSB_SPROM4_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM4_BFLHI, 0xFFFF, 0); ++ SPEX(boardflags2_lo, SSB_SPROM4_BFL2LO, 0xFFFF, 0); ++ SPEX(boardflags2_hi, SSB_SPROM4_BFL2HI, 0xFFFF, 0); + } else { + SPEX(country_code, SSB_SPROM5_CCODE, 0xFFFF, 0); + SPEX(boardflags_lo, SSB_SPROM5_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM5_BFLHI, 0xFFFF, 0); ++ SPEX(boardflags2_lo, SSB_SPROM5_BFL2LO, 0xFFFF, 0); ++ SPEX(boardflags2_hi, SSB_SPROM5_BFL2HI, 0xFFFF, 0); + } + SPEX(ant_available_a, SSB_SPROM4_ANTAVAIL, SSB_SPROM4_ANTAVAIL_A, + SSB_SPROM4_ANTAVAIL_A_SHIFT); +@@ -464,6 +515,8 @@ static void sprom_extract_r45(struct ssb + memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, + sizeof(out->antenna_gain.ghz5)); - /* SPROM Revision 5 (inherits most data from rev 4) */ --#define SSB_SPROM5_BFLLO 0x104A /* Boardflags (low 16 bits) */ --#define SSB_SPROM5_BFLHI 0x104C /* Board Flags Hi */ --#define SSB_SPROM5_IL0MAC 0x1052 /* 6 byte MAC address for a/b/g/n */ --#define SSB_SPROM5_CCODE 0x1044 /* Country Code (2 bytes) */ --#define SSB_SPROM5_GPIOA 0x1076 /* Gen. Purpose IO # 0 and 1 */ -+#define SSB_SPROM5_CCODE 0x0044 /* Country Code (2 bytes) */ -+#define SSB_SPROM5_BFLLO 0x004A /* Boardflags (low 16 bits) */ -+#define SSB_SPROM5_BFLHI 0x004C /* Board Flags Hi */ -+#define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */ -+#define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */ - #define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */ - #define SSB_SPROM5_GPIOA_P1 0xFF00 /* Pin 1 */ - #define SSB_SPROM5_GPIOA_P1_SHIFT 8 --#define SSB_SPROM5_GPIOB 0x1078 /* Gen. Purpose IO # 2 and 3 */ -+#define SSB_SPROM5_GPIOB 0x0078 /* Gen. Purpose IO # 2 and 3 */ - #define SSB_SPROM5_GPIOB_P2 0x00FF /* Pin 2 */ - #define SSB_SPROM5_GPIOB_P3 0xFF00 /* Pin 3 */ - #define SSB_SPROM5_GPIOB_P3_SHIFT 8 ++ sprom_extract_r458(out, in); ++ + /* TODO - get remaining rev 4 stuff needed */ + } - /* SPROM Revision 8 */ --#define SSB_SPROM8_BFLLO 0x1084 /* Boardflags (low 16 bits) */ --#define SSB_SPROM8_BFLHI 0x1086 /* Boardflags Hi */ --#define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */ --#define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */ --#define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/ --#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ --#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 --#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */ --#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0 --#define SSB_SPROM8_AGAIN01 0x109E /* Antenna Gain (in dBm Q5.2) */ -+#define SSB_SPROM8_BOARDREV 0x0082 /* Board revision */ -+#define SSB_SPROM8_BFLLO 0x0084 /* Board flags (bits 0-15) */ -+#define SSB_SPROM8_BFLHI 0x0086 /* Board flags (bits 16-31) */ -+#define SSB_SPROM8_BFL2LO 0x0088 /* Board flags (bits 32-47) */ -+#define SSB_SPROM8_BFL2HI 0x008A /* Board flags (bits 48-63) */ -+#define SSB_SPROM8_IL0MAC 0x008C /* 6 byte MAC address */ -+#define SSB_SPROM8_CCODE 0x0092 /* 2 byte country code */ -+#define SSB_SPROM8_GPIOA 0x0096 /*Gen. Purpose IO # 0 and 1 */ -+#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */ -+#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */ -+#define SSB_SPROM8_GPIOA_P1_SHIFT 8 -+#define SSB_SPROM8_GPIOB 0x0098 /* Gen. Purpose IO # 2 and 3 */ -+#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ -+#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ -+#define SSB_SPROM8_GPIOB_P3_SHIFT 8 -+#define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/ -+#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ -+#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 -+#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */ -+#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0 -+#define SSB_SPROM8_AGAIN01 0x009E /* Antenna Gain (in dBm Q5.2) */ - #define SSB_SPROM8_AGAIN0 0x00FF /* Antenna 0 */ - #define SSB_SPROM8_AGAIN0_SHIFT 0 - #define SSB_SPROM8_AGAIN1 0xFF00 /* Antenna 1 */ - #define SSB_SPROM8_AGAIN1_SHIFT 8 --#define SSB_SPROM8_AGAIN23 0x10A0 -+#define SSB_SPROM8_AGAIN23 0x00A0 - #define SSB_SPROM8_AGAIN2 0x00FF /* Antenna 2 */ - #define SSB_SPROM8_AGAIN2_SHIFT 0 - #define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */ - #define SSB_SPROM8_AGAIN3_SHIFT 8 --#define SSB_SPROM8_GPIOA 0x1096 /*Gen. Purpose IO # 0 and 1 */ --#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */ --#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */ --#define SSB_SPROM8_GPIOA_P1_SHIFT 8 --#define SSB_SPROM8_GPIOB 0x1098 /* Gen. Purpose IO # 2 and 3 */ --#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ --#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ --#define SSB_SPROM8_GPIOB_P3_SHIFT 8 --#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power BG in path 1 */ --#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */ -+#define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */ -+#define SSB_SPROM8_RSSISMF2G 0x000F -+#define SSB_SPROM8_RSSISMC2G 0x00F0 -+#define SSB_SPROM8_RSSISMC2G_SHIFT 4 -+#define SSB_SPROM8_RSSISAV2G 0x0700 -+#define SSB_SPROM8_RSSISAV2G_SHIFT 8 -+#define SSB_SPROM8_BXA2G 0x1800 -+#define SSB_SPROM8_BXA2G_SHIFT 11 -+#define SSB_SPROM8_RSSIPARM5G 0x00A6 /* RSSI params for 5GHz */ -+#define SSB_SPROM8_RSSISMF5G 0x000F -+#define SSB_SPROM8_RSSISMC5G 0x00F0 -+#define SSB_SPROM8_RSSISMC5G_SHIFT 4 -+#define SSB_SPROM8_RSSISAV5G 0x0700 -+#define SSB_SPROM8_RSSISAV5G_SHIFT 8 -+#define SSB_SPROM8_BXA5G 0x1800 -+#define SSB_SPROM8_BXA5G_SHIFT 11 -+#define SSB_SPROM8_TRI25G 0x00A8 /* TX isolation 2.4&5.3GHz */ -+#define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */ -+#define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */ -+#define SSB_SPROM8_TRI5G_SHIFT 8 -+#define SSB_SPROM8_TRI5GHL 0x00AA /* TX isolation 5.2/5.8GHz */ -+#define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */ -+#define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */ -+#define SSB_SPROM8_TRI5GH_SHIFT 8 -+#define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */ -+#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ -+#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ -+#define SSB_SPROM8_RXPO5G_SHIFT 8 -+#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ -+#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ - #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ - #define SSB_SPROM8_ITSSI_BG_SHIFT 8 --#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power A in path 1 */ --#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power A */ -+#define SSB_SPROM8_PA0B0 0x00C2 /* 2GHz power amp settings */ -+#define SSB_SPROM8_PA0B1 0x00C4 -+#define SSB_SPROM8_PA0B2 0x00C6 -+#define SSB_SPROM8_MAXP_A 0x00C8 /* Max Power 5.3GHz */ -+#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */ - #define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ - #define SSB_SPROM8_ITSSI_A_SHIFT 8 -+#define SSB_SPROM8_MAXP_AHL 0x00CA /* Max Power 5.2/5.8GHz */ -+#define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */ -+#define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */ -+#define SSB_SPROM8_MAXP_AL_SHIFT 8 -+#define SSB_SPROM8_PA1B0 0x00CC /* 5.3GHz power amp settings */ -+#define SSB_SPROM8_PA1B1 0x00CE -+#define SSB_SPROM8_PA1B2 0x00D0 -+#define SSB_SPROM8_PA1LOB0 0x00D2 /* 5.2GHz power amp settings */ -+#define SSB_SPROM8_PA1LOB1 0x00D4 -+#define SSB_SPROM8_PA1LOB2 0x00D6 -+#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ -+#define SSB_SPROM8_PA1HIB1 0x00DA -+#define SSB_SPROM8_PA1HIB2 0x00DC -+#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ -+#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ -+#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ -+#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ -+#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ +@@ -474,12 +527,14 @@ static void sprom_extract_r8(struct ssb_ - /* Values for SSB_SPROM1_BINF_CCODE */ - enum { ---- a/drivers/ssb/scan.c -+++ b/drivers/ssb/scan.c -@@ -162,6 +162,8 @@ static u8 chipid_to_nrcores(u16 chipid) - static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx, - u16 offset) - { -+ u32 lo, hi; -+ - switch (bus->bustype) { - case SSB_BUSTYPE_SSB: - offset += current_coreidx * SSB_CORE_SIZE; -@@ -174,6 +176,10 @@ static u32 scan_read32(struct ssb_bus *b - offset -= 0x800; - } else - ssb_pcmcia_switch_segment(bus, 0); -+ lo = readw(bus->mmio + offset); -+ hi = readw(bus->mmio + offset + 2); -+ return lo | (hi << 16); -+ default: - break; - } - return readl(bus->mmio + offset); -@@ -188,6 +194,8 @@ static int scan_switchcore(struct ssb_bu - return ssb_pci_switch_coreidx(bus, coreidx); - case SSB_BUSTYPE_PCMCIA: - return ssb_pcmcia_switch_coreidx(bus, coreidx); -+ default: -+ break; + /* extract the MAC address */ + for (i = 0; i < 3; i++) { +- v = in[SPOFF(SSB_SPROM1_IL0MAC) + i]; ++ v = in[SPOFF(SSB_SPROM8_IL0MAC) + i]; + *(((__be16 *)out->il0mac) + i) = cpu_to_be16(v); } - return 0; + SPEX(country_code, SSB_SPROM8_CCODE, 0xFFFF, 0); + SPEX(boardflags_lo, SSB_SPROM8_BFLLO, 0xFFFF, 0); + SPEX(boardflags_hi, SSB_SPROM8_BFLHI, 0xFFFF, 0); ++ SPEX(boardflags2_lo, SSB_SPROM8_BFL2LO, 0xFFFF, 0); ++ SPEX(boardflags2_hi, SSB_SPROM8_BFL2HI, 0xFFFF, 0); + SPEX(ant_available_a, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_A, + SSB_SPROM8_ANTAVAIL_A_SHIFT); + SPEX(ant_available_bg, SSB_SPROM8_ANTAVAIL, SSB_SPROM8_ANTAVAIL_BG, +@@ -490,12 +545,55 @@ static void sprom_extract_r8(struct ssb_ + SPEX(maxpwr_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_MAXP_A_MASK, 0); + SPEX(itssi_a, SSB_SPROM8_MAXP_A, SSB_SPROM8_ITSSI_A, + SSB_SPROM8_ITSSI_A_SHIFT); ++ SPEX(maxpwr_ah, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AH_MASK, 0); ++ SPEX(maxpwr_al, SSB_SPROM8_MAXP_AHL, SSB_SPROM8_MAXP_AL_MASK, ++ SSB_SPROM8_MAXP_AL_SHIFT); + SPEX(gpio0, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P0, 0); + SPEX(gpio1, SSB_SPROM8_GPIOA, SSB_SPROM8_GPIOA_P1, + SSB_SPROM8_GPIOA_P1_SHIFT); + SPEX(gpio2, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P2, 0); + SPEX(gpio3, SSB_SPROM8_GPIOB, SSB_SPROM8_GPIOB_P3, + SSB_SPROM8_GPIOB_P3_SHIFT); ++ SPEX(tri2g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI2G, 0); ++ SPEX(tri5g, SSB_SPROM8_TRI25G, SSB_SPROM8_TRI5G, ++ SSB_SPROM8_TRI5G_SHIFT); ++ SPEX(tri5gl, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GL, 0); ++ SPEX(tri5gh, SSB_SPROM8_TRI5GHL, SSB_SPROM8_TRI5GH, ++ SSB_SPROM8_TRI5GH_SHIFT); ++ SPEX(rxpo2g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO2G, 0); ++ SPEX(rxpo5g, SSB_SPROM8_RXPO, SSB_SPROM8_RXPO5G, ++ SSB_SPROM8_RXPO5G_SHIFT); ++ SPEX(rssismf2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMF2G, 0); ++ SPEX(rssismc2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISMC2G, ++ SSB_SPROM8_RSSISMC2G_SHIFT); ++ SPEX(rssisav2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_RSSISAV2G, ++ SSB_SPROM8_RSSISAV2G_SHIFT); ++ SPEX(bxa2g, SSB_SPROM8_RSSIPARM2G, SSB_SPROM8_BXA2G, ++ SSB_SPROM8_BXA2G_SHIFT); ++ SPEX(rssismf5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMF5G, 0); ++ SPEX(rssismc5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISMC5G, ++ SSB_SPROM8_RSSISMC5G_SHIFT); ++ SPEX(rssisav5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_RSSISAV5G, ++ SSB_SPROM8_RSSISAV5G_SHIFT); ++ SPEX(bxa5g, SSB_SPROM8_RSSIPARM5G, SSB_SPROM8_BXA5G, ++ SSB_SPROM8_BXA5G_SHIFT); ++ SPEX(pa0b0, SSB_SPROM8_PA0B0, 0xFFFF, 0); ++ SPEX(pa0b1, SSB_SPROM8_PA0B1, 0xFFFF, 0); ++ SPEX(pa0b2, SSB_SPROM8_PA0B2, 0xFFFF, 0); ++ SPEX(pa1b0, SSB_SPROM8_PA1B0, 0xFFFF, 0); ++ SPEX(pa1b1, SSB_SPROM8_PA1B1, 0xFFFF, 0); ++ SPEX(pa1b2, SSB_SPROM8_PA1B2, 0xFFFF, 0); ++ SPEX(pa1lob0, SSB_SPROM8_PA1LOB0, 0xFFFF, 0); ++ SPEX(pa1lob1, SSB_SPROM8_PA1LOB1, 0xFFFF, 0); ++ SPEX(pa1lob2, SSB_SPROM8_PA1LOB2, 0xFFFF, 0); ++ SPEX(pa1hib0, SSB_SPROM8_PA1HIB0, 0xFFFF, 0); ++ SPEX(pa1hib1, SSB_SPROM8_PA1HIB1, 0xFFFF, 0); ++ SPEX(pa1hib2, SSB_SPROM8_PA1HIB2, 0xFFFF, 0); ++ SPEX(cck2gpo, SSB_SPROM8_CCK2GPO, 0xFFFF, 0); ++ SPEX32(ofdm2gpo, SSB_SPROM8_OFDM2GPO, 0xFFFFFFFF, 0); ++ SPEX32(ofdm5glpo, SSB_SPROM8_OFDM5GLPO, 0xFFFFFFFF, 0); ++ SPEX32(ofdm5gpo, SSB_SPROM8_OFDM5GPO, 0xFFFFFFFF, 0); ++ SPEX32(ofdm5ghpo, SSB_SPROM8_OFDM5GHPO, 0xFFFFFFFF, 0); + + /* Extract the antenna gain values. */ + SPEX(antenna_gain.ghz24.a0, SSB_SPROM8_AGAIN01, +@@ -509,6 +607,8 @@ static void sprom_extract_r8(struct ssb_ + memcpy(&out->antenna_gain.ghz5, &out->antenna_gain.ghz24, + sizeof(out->antenna_gain.ghz5)); + ++ sprom_extract_r458(out, in); ++ + /* TODO - get remaining rev 8 stuff needed */ } -@@ -206,6 +214,8 @@ void ssb_iounmap(struct ssb_bus *bus) - SSB_BUG_ON(1); /* Can't reach this code. */ - #endif - break; -+ default: + +@@ -521,36 +621,34 @@ static int sprom_extract(struct ssb_bus + ssb_dprintk(KERN_DEBUG PFX "SPROM revision %d detected.\n", out->revision); + memset(out->et0mac, 0xFF, 6); /* preset et0 and et1 mac */ + memset(out->et1mac, 0xFF, 6); ++ + if ((bus->chip_id & 0xFF00) == 0x4400) { + /* Workaround: The BCM44XX chip has a stupid revision + * number stored in the SPROM. + * Always extract r1. */ + out->revision = 1; ++ ssb_dprintk(KERN_DEBUG PFX "SPROM treated as revision %d\n", out->revision); ++ } ++ ++ switch (out->revision) { ++ case 1: ++ case 2: ++ case 3: + sprom_extract_r123(out, in); +- } else if (bus->chip_id == 0x4321) { +- /* the BCM4328 has a chipid == 0x4321 and a rev 4 SPROM */ +- out->revision = 4; + break; - } - bus->mmio = NULL; - bus->mapped_device = NULL; -@@ -230,6 +240,8 @@ static void __iomem *ssb_ioremap(struct - SSB_BUG_ON(1); /* Can't reach this code. */ - #endif - break; -+ default: ++ case 4: ++ case 5: + sprom_extract_r45(out, in); +- } else { +- switch (out->revision) { +- case 1: +- case 2: +- case 3: +- sprom_extract_r123(out, in); +- break; +- case 4: +- case 5: +- sprom_extract_r45(out, in); +- break; +- case 8: +- sprom_extract_r8(out, in); +- break; +- default: +- ssb_printk(KERN_WARNING PFX "Unsupported SPROM" +- " revision %d detected. Will extract" +- " v1\n", out->revision); +- sprom_extract_r123(out, in); +- } + break; ++ case 8: ++ sprom_extract_r8(out, in); ++ break; ++ default: ++ ssb_printk(KERN_WARNING PFX "Unsupported SPROM" ++ " revision %d detected. Will extract" ++ " v1\n", out->revision); ++ out->revision = 1; ++ sprom_extract_r123(out, in); } - return mmio; -@@ -339,7 +351,7 @@ int ssb_bus_scan(struct ssb_bus *bus, - dev->bus = bus; - dev->ops = bus->ops; + if (out->boardflags_lo == 0xFFFF) +@@ -564,13 +662,34 @@ static int sprom_extract(struct ssb_bus + static int ssb_pci_sprom_get(struct ssb_bus *bus, + struct ssb_sprom *sprom) + { +- const struct ssb_sprom *fallback; +- int err = -ENOMEM; ++ int err; + u16 *buf; -- ssb_dprintk(KERN_INFO PFX -+ printk(KERN_DEBUG PFX - "Core %d found: %s " - "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n", - i, ssb_core_name(dev->id.coreid), ---- a/drivers/ssb/driver_chipcommon.c -+++ b/drivers/ssb/driver_chipcommon.c -@@ -233,6 +233,8 @@ void ssb_chipcommon_init(struct ssb_chip - { - if (!cc->dev) - return; /* We don't have a ChipCommon */ -+ if (cc->dev->id.revision >= 11) -+ cc->status = chipco_read32(cc, SSB_CHIPCO_CHIPSTAT); - ssb_pmu_init(cc); - chipco_powercontrol_init(cc); - ssb_chipco_set_clockmode(cc, SSB_CLKMODE_FAST); -@@ -370,6 +372,7 @@ u32 ssb_chipco_gpio_control(struct ssb_c - { - return chipco_write32_masked(cc, SSB_CHIPCO_GPIOCTL, mask, value); - } -+EXPORT_SYMBOL(ssb_chipco_gpio_control); ++ if (!ssb_is_sprom_available(bus)) { ++ ssb_printk(KERN_ERR PFX "No SPROM available!\n"); ++ return -ENODEV; ++ } ++ if (bus->chipco.dev) { /* can be unavailable! */ ++ /* ++ * get SPROM offset: SSB_SPROM_BASE1 except for ++ * chipcommon rev >= 31 or chip ID is 0x4312 and ++ * chipcommon status & 3 == 2 ++ */ ++ if (bus->chipco.dev->id.revision >= 31) ++ bus->sprom_offset = SSB_SPROM_BASE31; ++ else if (bus->chip_id == 0x4312 && ++ (bus->chipco.status & 0x03) == 2) ++ bus->sprom_offset = SSB_SPROM_BASE31; ++ else ++ bus->sprom_offset = SSB_SPROM_BASE1; ++ } else { ++ bus->sprom_offset = SSB_SPROM_BASE1; ++ } ++ ssb_dprintk(KERN_INFO PFX "SPROM offset is 0x%x\n", bus->sprom_offset); ++ + buf = kcalloc(SSB_SPROMSIZE_WORDS_R123, sizeof(u16), GFP_KERNEL); + if (!buf) +- goto out; ++ return -ENOMEM; + bus->sprom_size = SSB_SPROMSIZE_WORDS_R123; + sprom_do_read(bus, buf); + err = sprom_check_crc(buf, bus->sprom_size); +@@ -580,17 +699,24 @@ static int ssb_pci_sprom_get(struct ssb_ + buf = kcalloc(SSB_SPROMSIZE_WORDS_R4, sizeof(u16), + GFP_KERNEL); + if (!buf) +- goto out; ++ return -ENOMEM; + bus->sprom_size = SSB_SPROMSIZE_WORDS_R4; + sprom_do_read(bus, buf); + err = sprom_check_crc(buf, bus->sprom_size); + if (err) { + /* All CRC attempts failed. + * Maybe there is no SPROM on the device? +- * If we have a fallback, use that. */ +- fallback = ssb_get_fallback_sprom(); +- if (fallback) { +- memcpy(sprom, fallback, sizeof(*sprom)); ++ * Now we ask the arch code if there is some sprom ++ * available for this device in some other storage */ ++ err = ssb_fill_sprom_with_fallback(bus, sprom); ++ if (err) { ++ ssb_printk(KERN_WARNING PFX "WARNING: Using" ++ " fallback SPROM failed (err %d)\n", ++ err); ++ } else { ++ ssb_dprintk(KERN_DEBUG PFX "Using SPROM" ++ " revision %d provided by" ++ " platform.\n", sprom->revision); + err = 0; + goto out_free; + } +@@ -602,19 +728,15 @@ static int ssb_pci_sprom_get(struct ssb_ - u32 ssb_chipco_gpio_intmask(struct ssb_chipcommon *cc, u32 mask, u32 value) - { ---- a/drivers/ssb/driver_mipscore.c -+++ b/drivers/ssb/driver_mipscore.c -@@ -49,29 +49,54 @@ static const u32 ipsflag_irq_shift[] = { + out_free: + kfree(buf); +-out: + return err; + } - static inline u32 ssb_irqflag(struct ssb_device *dev) + static void ssb_pci_get_boardinfo(struct ssb_bus *bus, + struct ssb_boardinfo *bi) { -- return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG; -+ u32 tpsflag = ssb_read32(dev, SSB_TPSFLAG); -+ if (tpsflag) -+ return ssb_read32(dev, SSB_TPSFLAG) & SSB_TPSFLAG_BPFLAG; -+ else -+ /* not irq supported */ -+ return 0x3f; -+} -+ -+static struct ssb_device *find_device(struct ssb_device *rdev, int irqflag) -+{ -+ struct ssb_bus *bus = rdev->bus; -+ int i; -+ for (i = 0; i < bus->nr_devices; i++) { -+ struct ssb_device *dev; -+ dev = &(bus->devices[i]); -+ if (ssb_irqflag(dev) == irqflag) -+ return dev; -+ } -+ return NULL; +- pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_VENDOR_ID, +- &bi->vendor); +- pci_read_config_word(bus->host_pci, PCI_SUBSYSTEM_ID, +- &bi->type); +- pci_read_config_word(bus->host_pci, PCI_REVISION_ID, +- &bi->rev); ++ bi->vendor = bus->host_pci->subsystem_vendor; ++ bi->type = bus->host_pci->subsystem_device; ++ bi->rev = bus->host_pci->revision; } - /* Get the MIPS IRQ assignment for a specified device. - * If unassigned, 0 is returned. -+ * If disabled, 5 is returned. -+ * If not supported, 6 is returned. + int ssb_pci_get_invariants(struct ssb_bus *bus, +--- a/drivers/ssb/pcihost_wrapper.c ++++ b/drivers/ssb/pcihost_wrapper.c +@@ -12,6 +12,7 @@ */ - unsigned int ssb_mips_irq(struct ssb_device *dev) - { - struct ssb_bus *bus = dev->bus; -+ struct ssb_device *mdev = bus->mipscore.dev; - u32 irqflag; - u32 ipsflag; - u32 tmp; - unsigned int irq; - - irqflag = ssb_irqflag(dev); -+ if (irqflag == 0x3f) -+ return 6; - ipsflag = ssb_read32(bus->mipscore.dev, SSB_IPSFLAG); - for (irq = 1; irq <= 4; irq++) { - tmp = ((ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]); - if (tmp == irqflag) - break; - } -- if (irq == 5) -- irq = 0; -+ if (irq == 5) { -+ if ((1 << irqflag) & ssb_read32(mdev, SSB_INTVEC)) -+ irq = 0; -+ } - return irq; - } -@@ -97,25 +122,56 @@ static void set_irq(struct ssb_device *d - struct ssb_device *mdev = bus->mipscore.dev; - u32 irqflag = ssb_irqflag(dev); + #include ++#include + #include -+ BUG_ON(oldirq == 6); -+ - dev->irq = irq + 2; -- ssb_dprintk(KERN_INFO PFX -- "set_irq: core 0x%04x, irq %d => %d\n", -- dev->id.coreid, oldirq, irq); - /* clear the old irq */ - if (oldirq == 0) - ssb_write32(mdev, SSB_INTVEC, (~(1 << irqflag) & ssb_read32(mdev, SSB_INTVEC))); -- else -+ else if (oldirq != 5) - clear_irq(bus, oldirq); +@@ -52,12 +53,13 @@ static int ssb_pcihost_resume(struct pci + # define ssb_pcihost_resume NULL + #endif /* CONFIG_PM */ - /* assign the new one */ - if (irq == 0) { - ssb_write32(mdev, SSB_INTVEC, ((1 << irqflag) | ssb_read32(mdev, SSB_INTVEC))); - } else { -+ u32 ipsflag = ssb_read32(mdev, SSB_IPSFLAG); -+ if ((ipsflag & ipsflag_irq_mask[irq]) != ipsflag_irq_mask[irq]) { -+ u32 oldipsflag = (ipsflag & ipsflag_irq_mask[irq]) >> ipsflag_irq_shift[irq]; -+ struct ssb_device *olddev = find_device(dev, oldipsflag); -+ if (olddev) -+ set_irq(olddev, 0); -+ } - irqflag <<= ipsflag_irq_shift[irq]; -- irqflag |= (ssb_read32(mdev, SSB_IPSFLAG) & ~ipsflag_irq_mask[irq]); -+ irqflag |= (ipsflag & ~ipsflag_irq_mask[irq]); - ssb_write32(mdev, SSB_IPSFLAG, irqflag); - } -+ ssb_dprintk(KERN_INFO PFX -+ "set_irq: core 0x%04x, irq %d => %d\n", -+ dev->id.coreid, oldirq+2, irq+2); -+} -+ -+static void print_irq(struct ssb_device *dev, unsigned int irq) -+{ -+ int i; -+ static const char *irq_name[] = {"2(S)", "3", "4", "5", "6", "D", "I"}; -+ ssb_dprintk(KERN_INFO PFX -+ "core 0x%04x, irq :", dev->id.coreid); -+ for (i = 0; i <= 6; i++) { -+ ssb_dprintk(" %s%s", irq_name[i], i==irq?"*":" "); -+ } -+ ssb_dprintk("\n"); -+} +-static int ssb_pcihost_probe(struct pci_dev *dev, +- const struct pci_device_id *id) ++static int __devinit ssb_pcihost_probe(struct pci_dev *dev, ++ const struct pci_device_id *id) + { + struct ssb_bus *ssb; + int err = -ENOMEM; + const char *name; ++ u32 val; + + ssb = kzalloc(sizeof(*ssb), GFP_KERNEL); + if (!ssb) +@@ -73,6 +75,12 @@ static int ssb_pcihost_probe(struct pci_ + goto err_pci_disable; + pci_set_master(dev); + ++ /* Disable the RETRY_TIMEOUT register (0x41) to keep ++ * PCI Tx retries from interfering with C3 CPU state */ ++ pci_read_config_dword(dev, 0x40, &val); ++ if ((val & 0x0000ff00) != 0) ++ pci_write_config_dword(dev, 0x40, val & 0xffff00ff); + -+static void dump_irq(struct ssb_bus *bus) -+{ -+ int i; -+ for (i = 0; i < bus->nr_devices; i++) { -+ struct ssb_device *dev; -+ dev = &(bus->devices[i]); -+ print_irq(dev, ssb_mips_irq(dev)); -+ } + err = ssb_bus_pcibus_register(ssb, dev); + if (err) + goto err_pci_release_regions; +@@ -102,7 +110,7 @@ static void ssb_pcihost_remove(struct pc + pci_set_drvdata(dev, NULL); } - static void ssb_mips_serial_init(struct ssb_mipscore *mcore) -@@ -197,17 +253,23 @@ void ssb_mipscore_init(struct ssb_mipsco - - /* Assign IRQs to all cores on the bus, start with irq line 2, because serial usually takes 1 */ - for (irq = 2, i = 0; i < bus->nr_devices; i++) { -+ int mips_irq; - dev = &(bus->devices[i]); -- dev->irq = ssb_mips_irq(dev) + 2; -+ mips_irq = ssb_mips_irq(dev); -+ if (mips_irq > 4) -+ dev->irq = 0; -+ else -+ dev->irq = mips_irq + 2; -+ if (dev->irq > 5) -+ continue; - switch (dev->id.coreid) { - case SSB_DEV_USB11_HOST: - /* shouldn't need a separate irq line for non-4710, most of them have a proper - * external usb controller on the pci */ - if ((bus->chip_id == 0x4710) && (irq <= 4)) { - set_irq(dev, irq++); -- break; - } -- /* fallthrough */ -+ break; - case SSB_DEV_PCI: - case SSB_DEV_ETHERNET: - case SSB_DEV_ETHERNET_GBIT: -@@ -218,8 +280,14 @@ void ssb_mipscore_init(struct ssb_mipsco - set_irq(dev, irq++); - break; - } -+ /* fallthrough */ -+ case SSB_DEV_EXTIF: -+ set_irq(dev, 0); -+ break; - } +-int ssb_pcihost_register(struct pci_driver *driver) ++int __devinit ssb_pcihost_register(struct pci_driver *driver) + { + driver->probe = ssb_pcihost_probe; + driver->remove = ssb_pcihost_remove; +--- a/drivers/ssb/pcmcia.c ++++ b/drivers/ssb/pcmcia.c +@@ -583,7 +583,7 @@ static int ssb_pcmcia_sprom_write_all(st + ssb_printk("."); + err = ssb_pcmcia_sprom_write(bus, i, sprom[i]); + if (err) { +- ssb_printk("\n" KERN_NOTICE PFX ++ ssb_printk(KERN_NOTICE PFX + "Failed to write to SPROM.\n"); + failed = 1; + break; +@@ -591,7 +591,7 @@ static int ssb_pcmcia_sprom_write_all(st } -+ ssb_dprintk(KERN_INFO PFX "after irq reconfiguration\n"); -+ dump_irq(bus); - - ssb_mips_serial_init(mcore); - ssb_mips_flash_detect(mcore); ---- a/drivers/ssb/sprom.c -+++ b/drivers/ssb/sprom.c -@@ -13,6 +13,9 @@ - - #include "ssb_private.h" - -+#include -+#include -+ - - static const struct ssb_sprom *fallback_sprom; + err = ssb_pcmcia_sprom_command(bus, SSB_PCMCIA_SPROMCTL_WRITEDIS); + if (err) { +- ssb_printk("\n" KERN_NOTICE PFX ++ ssb_printk(KERN_NOTICE PFX + "Could not disable SPROM write access.\n"); + failed = 1; + } +@@ -617,134 +617,140 @@ static int ssb_pcmcia_sprom_check_crc(co + } \ + } while (0) -@@ -33,17 +36,27 @@ static int sprom2hex(const u16 *sprom, c - static int hex2sprom(u16 *sprom, const char *dump, size_t len, - size_t sprom_size_words) +-int ssb_pcmcia_get_invariants(struct ssb_bus *bus, +- struct ssb_init_invariants *iv) ++static int ssb_pcmcia_get_mac(struct pcmcia_device *p_dev, ++ tuple_t *tuple, ++ void *priv) { -- char tmp[5] = { 0 }; -- int cnt = 0; -+ char c, tmp[5] = { 0 }; -+ int err, cnt = 0; - unsigned long parsed; +- tuple_t tuple; +- int res; +- unsigned char buf[32]; ++ struct ssb_sprom *sprom = priv; ++ ++ if (tuple->TupleData[0] != CISTPL_FUNCE_LAN_NODE_ID) ++ return -EINVAL; ++ if (tuple->TupleDataLen != ETH_ALEN + 2) ++ return -EINVAL; ++ if (tuple->TupleData[1] != ETH_ALEN) ++ return -EINVAL; ++ memcpy(sprom->il0mac, &tuple->TupleData[2], ETH_ALEN); ++ return 0; ++}; ++ ++static int ssb_pcmcia_do_get_invariants(struct pcmcia_device *p_dev, ++ tuple_t *tuple, ++ void *priv) ++{ ++ struct ssb_init_invariants *iv = priv; + struct ssb_sprom *sprom = &iv->sprom; + struct ssb_boardinfo *bi = &iv->boardinfo; + const char *error_description; -- if (len < sprom_size_words * 2) -+ /* Strip whitespace at the end. */ -+ while (len) { -+ c = dump[len - 1]; -+ if (!isspace(c) && c != '\0') -+ break; -+ len--; ++ GOTO_ERROR_ON(tuple->TupleDataLen < 1, "VEN tpl < 1"); ++ switch (tuple->TupleData[0]) { ++ case SSB_PCMCIA_CIS_ID: ++ GOTO_ERROR_ON((tuple->TupleDataLen != 5) && ++ (tuple->TupleDataLen != 7), ++ "id tpl size"); ++ bi->vendor = tuple->TupleData[1] | ++ ((u16)tuple->TupleData[2] << 8); ++ break; ++ case SSB_PCMCIA_CIS_BOARDREV: ++ GOTO_ERROR_ON(tuple->TupleDataLen != 2, ++ "boardrev tpl size"); ++ sprom->board_rev = tuple->TupleData[1]; ++ break; ++ case SSB_PCMCIA_CIS_PA: ++ GOTO_ERROR_ON((tuple->TupleDataLen != 9) && ++ (tuple->TupleDataLen != 10), ++ "pa tpl size"); ++ sprom->pa0b0 = tuple->TupleData[1] | ++ ((u16)tuple->TupleData[2] << 8); ++ sprom->pa0b1 = tuple->TupleData[3] | ++ ((u16)tuple->TupleData[4] << 8); ++ sprom->pa0b2 = tuple->TupleData[5] | ++ ((u16)tuple->TupleData[6] << 8); ++ sprom->itssi_a = tuple->TupleData[7]; ++ sprom->itssi_bg = tuple->TupleData[7]; ++ sprom->maxpwr_a = tuple->TupleData[8]; ++ sprom->maxpwr_bg = tuple->TupleData[8]; ++ break; ++ case SSB_PCMCIA_CIS_OEMNAME: ++ /* We ignore this. */ ++ break; ++ case SSB_PCMCIA_CIS_CCODE: ++ GOTO_ERROR_ON(tuple->TupleDataLen != 2, ++ "ccode tpl size"); ++ sprom->country_code = tuple->TupleData[1]; ++ break; ++ case SSB_PCMCIA_CIS_ANTENNA: ++ GOTO_ERROR_ON(tuple->TupleDataLen != 2, ++ "ant tpl size"); ++ sprom->ant_available_a = tuple->TupleData[1]; ++ sprom->ant_available_bg = tuple->TupleData[1]; ++ break; ++ case SSB_PCMCIA_CIS_ANTGAIN: ++ GOTO_ERROR_ON(tuple->TupleDataLen != 2, ++ "antg tpl size"); ++ sprom->antenna_gain.ghz24.a0 = tuple->TupleData[1]; ++ sprom->antenna_gain.ghz24.a1 = tuple->TupleData[1]; ++ sprom->antenna_gain.ghz24.a2 = tuple->TupleData[1]; ++ sprom->antenna_gain.ghz24.a3 = tuple->TupleData[1]; ++ sprom->antenna_gain.ghz5.a0 = tuple->TupleData[1]; ++ sprom->antenna_gain.ghz5.a1 = tuple->TupleData[1]; ++ sprom->antenna_gain.ghz5.a2 = tuple->TupleData[1]; ++ sprom->antenna_gain.ghz5.a3 = tuple->TupleData[1]; ++ break; ++ case SSB_PCMCIA_CIS_BFLAGS: ++ GOTO_ERROR_ON((tuple->TupleDataLen != 3) && ++ (tuple->TupleDataLen != 5), ++ "bfl tpl size"); ++ sprom->boardflags_lo = tuple->TupleData[1] | ++ ((u16)tuple->TupleData[2] << 8); ++ break; ++ case SSB_PCMCIA_CIS_LEDS: ++ GOTO_ERROR_ON(tuple->TupleDataLen != 5, ++ "leds tpl size"); ++ sprom->gpio0 = tuple->TupleData[1]; ++ sprom->gpio1 = tuple->TupleData[2]; ++ sprom->gpio2 = tuple->TupleData[3]; ++ sprom->gpio3 = tuple->TupleData[4]; ++ break; + } -+ /* Length must match exactly. */ -+ if (len != sprom_size_words * 4) - return -EINVAL; - - while (cnt < sprom_size_words) { - memcpy(tmp, dump, 4); - dump += 4; -- parsed = simple_strtoul(tmp, NULL, 16); -+ err = strict_strtoul(tmp, 16, &parsed); -+ if (err) -+ return err; - sprom[cnt++] = swab16((u16)parsed); - } - -@@ -90,6 +103,7 @@ ssize_t ssb_attr_sprom_store(struct ssb_ - u16 *sprom; - int res = 0, err = -ENOMEM; - size_t sprom_size_words = bus->sprom_size; -+ struct ssb_freeze_context freeze; - - sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL); - if (!sprom) -@@ -111,18 +125,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_ - err = -ERESTARTSYS; - if (mutex_lock_interruptible(&bus->sprom_mutex)) - goto out_kfree; -- err = ssb_devices_freeze(bus); -- if (err == -EOPNOTSUPP) { -- ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze devices. " -- "No suspend support. Is CONFIG_PM enabled?\n"); -- goto out_unlock; -- } -+ err = ssb_devices_freeze(bus, &freeze); - if (err) { - ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n"); - goto out_unlock; - } - res = sprom_write(bus, sprom); -- err = ssb_devices_thaw(bus); -+ err = ssb_devices_thaw(&freeze); - if (err) - ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n"); - out_unlock: -@@ -167,3 +176,17 @@ const struct ssb_sprom *ssb_get_fallback - { - return fallback_sprom; - } -+ -+/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */ -+bool ssb_is_sprom_available(struct ssb_bus *bus) -+{ -+ /* status register only exists on chipcomon rev >= 11 and we need check -+ for >= 31 only */ -+ /* this routine differs from specs as we do not access SPROM directly -+ on PCMCIA */ -+ if (bus->bustype == SSB_BUSTYPE_PCI && -+ bus->chipco.dev->id.revision >= 31) -+ return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM; ++ return -ENOSPC; /* continue with next entry */ + -+ return true; ++error: ++ ssb_printk(KERN_ERR PFX ++ "PCMCIA: Failed to fetch device invariants: %s\n", ++ error_description); ++ return -ENODEV; +} ---- a/drivers/ssb/ssb_private.h -+++ b/drivers/ssb/ssb_private.h -@@ -136,19 +136,27 @@ extern const struct ssb_sprom *ssb_get_f - - /* core.c */ - extern u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m); --extern int ssb_devices_freeze(struct ssb_bus *bus); --extern int ssb_devices_thaw(struct ssb_bus *bus); - extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev); - int ssb_for_each_bus_call(unsigned long data, - int (*func)(struct ssb_bus *bus, unsigned long data)); - extern struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev); - -+struct ssb_freeze_context { -+ /* Pointer to the bus */ -+ struct ssb_bus *bus; -+ /* Boolean list to indicate whether a device is frozen on this bus. */ -+ bool device_frozen[SSB_MAX_NR_CORES]; -+}; -+extern int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx); -+extern int ssb_devices_thaw(struct ssb_freeze_context *ctx); + + ++int ssb_pcmcia_get_invariants(struct ssb_bus *bus, ++ struct ssb_init_invariants *iv) ++{ ++ struct ssb_sprom *sprom = &iv->sprom; ++ int res; ++ + memset(sprom, 0xFF, sizeof(*sprom)); + sprom->revision = 1; + sprom->boardflags_lo = 0; + sprom->boardflags_hi = 0; - /* b43_pci_bridge.c */ - #ifdef CONFIG_SSB_B43_PCI_BRIDGE - extern int __init b43_pci_ssb_bridge_init(void); - extern void __exit b43_pci_ssb_bridge_exit(void); --#else /* CONFIG_SSB_B43_PCI_BRIDGR */ -+#else /* CONFIG_SSB_B43_PCI_BRIDGE */ - static inline int b43_pci_ssb_bridge_init(void) - { - return 0; -@@ -156,6 +164,6 @@ static inline int b43_pci_ssb_bridge_ini - static inline void b43_pci_ssb_bridge_exit(void) - { - } --#endif /* CONFIG_SSB_PCIHOST */ -+#endif /* CONFIG_SSB_B43_PCI_BRIDGE */ + /* First fetch the MAC address. */ +- memset(&tuple, 0, sizeof(tuple)); +- tuple.DesiredTuple = CISTPL_FUNCE; +- tuple.TupleData = buf; +- tuple.TupleDataMax = sizeof(buf); +- res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != 0, "MAC first tpl"); +- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != 0, "MAC first tpl data"); +- while (1) { +- GOTO_ERROR_ON(tuple.TupleDataLen < 1, "MAC tpl < 1"); +- if (tuple.TupleData[0] == CISTPL_FUNCE_LAN_NODE_ID) +- break; +- res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != 0, "MAC next tpl"); +- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != 0, "MAC next tpl data"); ++ res = pcmcia_loop_tuple(bus->host_pcmcia, CISTPL_FUNCE, ++ ssb_pcmcia_get_mac, sprom); ++ if (res != 0) { ++ ssb_printk(KERN_ERR PFX ++ "PCMCIA: Failed to fetch MAC address\n"); ++ return -ENODEV; + } +- GOTO_ERROR_ON(tuple.TupleDataLen != ETH_ALEN + 2, "MAC tpl size"); +- memcpy(sprom->il0mac, &tuple.TupleData[2], ETH_ALEN); - #endif /* LINUX_SSB_PRIVATE_H_ */ + /* Fetch the vendor specific tuples. */ +- memset(&tuple, 0, sizeof(tuple)); +- tuple.DesiredTuple = SSB_PCMCIA_CIS; +- tuple.TupleData = buf; +- tuple.TupleDataMax = sizeof(buf); +- res = pcmcia_get_first_tuple(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != 0, "VEN first tpl"); +- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != 0, "VEN first tpl data"); +- while (1) { +- GOTO_ERROR_ON(tuple.TupleDataLen < 1, "VEN tpl < 1"); +- switch (tuple.TupleData[0]) { +- case SSB_PCMCIA_CIS_ID: +- GOTO_ERROR_ON((tuple.TupleDataLen != 5) && +- (tuple.TupleDataLen != 7), +- "id tpl size"); +- bi->vendor = tuple.TupleData[1] | +- ((u16)tuple.TupleData[2] << 8); +- break; +- case SSB_PCMCIA_CIS_BOARDREV: +- GOTO_ERROR_ON(tuple.TupleDataLen != 2, +- "boardrev tpl size"); +- sprom->board_rev = tuple.TupleData[1]; +- break; +- case SSB_PCMCIA_CIS_PA: +- GOTO_ERROR_ON(tuple.TupleDataLen != 9, +- "pa tpl size"); +- sprom->pa0b0 = tuple.TupleData[1] | +- ((u16)tuple.TupleData[2] << 8); +- sprom->pa0b1 = tuple.TupleData[3] | +- ((u16)tuple.TupleData[4] << 8); +- sprom->pa0b2 = tuple.TupleData[5] | +- ((u16)tuple.TupleData[6] << 8); +- sprom->itssi_a = tuple.TupleData[7]; +- sprom->itssi_bg = tuple.TupleData[7]; +- sprom->maxpwr_a = tuple.TupleData[8]; +- sprom->maxpwr_bg = tuple.TupleData[8]; +- break; +- case SSB_PCMCIA_CIS_OEMNAME: +- /* We ignore this. */ +- break; +- case SSB_PCMCIA_CIS_CCODE: +- GOTO_ERROR_ON(tuple.TupleDataLen != 2, +- "ccode tpl size"); +- sprom->country_code = tuple.TupleData[1]; +- break; +- case SSB_PCMCIA_CIS_ANTENNA: +- GOTO_ERROR_ON(tuple.TupleDataLen != 2, +- "ant tpl size"); +- sprom->ant_available_a = tuple.TupleData[1]; +- sprom->ant_available_bg = tuple.TupleData[1]; +- break; +- case SSB_PCMCIA_CIS_ANTGAIN: +- GOTO_ERROR_ON(tuple.TupleDataLen != 2, +- "antg tpl size"); +- sprom->antenna_gain.ghz24.a0 = tuple.TupleData[1]; +- sprom->antenna_gain.ghz24.a1 = tuple.TupleData[1]; +- sprom->antenna_gain.ghz24.a2 = tuple.TupleData[1]; +- sprom->antenna_gain.ghz24.a3 = tuple.TupleData[1]; +- sprom->antenna_gain.ghz5.a0 = tuple.TupleData[1]; +- sprom->antenna_gain.ghz5.a1 = tuple.TupleData[1]; +- sprom->antenna_gain.ghz5.a2 = tuple.TupleData[1]; +- sprom->antenna_gain.ghz5.a3 = tuple.TupleData[1]; +- break; +- case SSB_PCMCIA_CIS_BFLAGS: +- GOTO_ERROR_ON(tuple.TupleDataLen != 3, +- "bfl tpl size"); +- sprom->boardflags_lo = tuple.TupleData[1] | +- ((u16)tuple.TupleData[2] << 8); +- break; +- case SSB_PCMCIA_CIS_LEDS: +- GOTO_ERROR_ON(tuple.TupleDataLen != 5, +- "leds tpl size"); +- sprom->gpio0 = tuple.TupleData[1]; +- sprom->gpio1 = tuple.TupleData[2]; +- sprom->gpio2 = tuple.TupleData[3]; +- sprom->gpio3 = tuple.TupleData[4]; +- break; +- } +- res = pcmcia_get_next_tuple(bus->host_pcmcia, &tuple); +- if (res == -ENOSPC) +- break; +- GOTO_ERROR_ON(res != 0, "VEN next tpl"); +- res = pcmcia_get_tuple_data(bus->host_pcmcia, &tuple); +- GOTO_ERROR_ON(res != 0, "VEN next tpl data"); +- } ++ res = pcmcia_loop_tuple(bus->host_pcmcia, SSB_PCMCIA_CIS, ++ ssb_pcmcia_do_get_invariants, iv); ++ if ((res == 0) || (res == -ENOSPC)) ++ return 0; + +- return 0; +-error: + ssb_printk(KERN_ERR PFX +- "PCMCIA: Failed to fetch device invariants: %s\n", +- error_description); ++ "PCMCIA: Failed to fetch device invariants\n"); + return -ENODEV; + } + +--- a/drivers/ssb/scan.c ++++ b/drivers/ssb/scan.c +@@ -162,6 +162,8 @@ static u8 chipid_to_nrcores(u16 chipid) + static u32 scan_read32(struct ssb_bus *bus, u8 current_coreidx, + u16 offset) + { ++ u32 lo, hi; ++ + switch (bus->bustype) { + case SSB_BUSTYPE_SSB: + offset += current_coreidx * SSB_CORE_SIZE; +@@ -174,7 +176,12 @@ static u32 scan_read32(struct ssb_bus *b + offset -= 0x800; + } else + ssb_pcmcia_switch_segment(bus, 0); +- break; ++ lo = readw(bus->mmio + offset); ++ hi = readw(bus->mmio + offset + 2); ++ return lo | (hi << 16); ++ case SSB_BUSTYPE_SDIO: ++ offset += current_coreidx * SSB_CORE_SIZE; ++ return ssb_sdio_scan_read32(bus, offset); + } + return readl(bus->mmio + offset); + } +@@ -188,6 +195,8 @@ static int scan_switchcore(struct ssb_bu + return ssb_pci_switch_coreidx(bus, coreidx); + case SSB_BUSTYPE_PCMCIA: + return ssb_pcmcia_switch_coreidx(bus, coreidx); ++ case SSB_BUSTYPE_SDIO: ++ return ssb_sdio_scan_switch_coreidx(bus, coreidx); + } + return 0; + } +@@ -206,6 +215,8 @@ void ssb_iounmap(struct ssb_bus *bus) + SSB_BUG_ON(1); /* Can't reach this code. */ + #endif + break; ++ case SSB_BUSTYPE_SDIO: ++ break; + } + bus->mmio = NULL; + bus->mapped_device = NULL; +@@ -230,6 +241,10 @@ static void __iomem *ssb_ioremap(struct + SSB_BUG_ON(1); /* Can't reach this code. */ + #endif + break; ++ case SSB_BUSTYPE_SDIO: ++ /* Nothing to ioremap in the SDIO case, just fake it */ ++ mmio = (void __iomem *)baseaddr; ++ break; + } + + return mmio; +@@ -245,7 +260,10 @@ static int we_support_multiple_80211_cor + #ifdef CONFIG_SSB_PCIHOST + if (bus->bustype == SSB_BUSTYPE_PCI) { + if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM && +- bus->host_pci->device == 0x4324) ++ ((bus->host_pci->device == 0x4313) || ++ (bus->host_pci->device == 0x431A) || ++ (bus->host_pci->device == 0x4321) || ++ (bus->host_pci->device == 0x4324))) + return 1; + } + #endif /* CONFIG_SSB_PCIHOST */ +@@ -294,8 +312,7 @@ int ssb_bus_scan(struct ssb_bus *bus, + } else { + if (bus->bustype == SSB_BUSTYPE_PCI) { + bus->chip_id = pcidev_to_chipid(bus->host_pci); +- pci_read_config_word(bus->host_pci, PCI_REVISION_ID, +- &bus->chip_rev); ++ bus->chip_rev = bus->host_pci->revision; + bus->chip_package = 0; + } else { + bus->chip_id = 0x4710; +@@ -339,7 +356,7 @@ int ssb_bus_scan(struct ssb_bus *bus, + dev->bus = bus; + dev->ops = bus->ops; + +- ssb_dprintk(KERN_INFO PFX ++ printk(KERN_DEBUG PFX + "Core %d found: %s " + "(cc 0x%03X, rev 0x%02X, vendor 0x%04X)\n", + i, ssb_core_name(dev->id.coreid), +@@ -407,6 +424,16 @@ int ssb_bus_scan(struct ssb_bus *bus, + bus->pcicore.dev = dev; + #endif /* CONFIG_SSB_DRIVER_PCICORE */ + break; ++ case SSB_DEV_ETHERNET: ++ if (bus->bustype == SSB_BUSTYPE_PCI) { ++ if (bus->host_pci->vendor == PCI_VENDOR_ID_BROADCOM && ++ (bus->host_pci->device & 0xFF00) == 0x4300) { ++ /* This is a dangling ethernet core on a ++ * wireless device. Ignore it. */ ++ continue; ++ } ++ } ++ break; + default: + break; + } +--- /dev/null ++++ b/drivers/ssb/sdio.c +@@ -0,0 +1,610 @@ ++/* ++ * Sonics Silicon Backplane ++ * SDIO-Hostbus related functions ++ * ++ * Copyright 2009 Albert Herranz ++ * ++ * Based on drivers/ssb/pcmcia.c ++ * Copyright 2006 Johannes Berg ++ * Copyright 2007-2008 Michael Buesch ++ * ++ * Licensed under the GNU/GPL. See COPYING for details. ++ * ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#include "ssb_private.h" ++ ++/* Define the following to 1 to enable a printk on each coreswitch. */ ++#define SSB_VERBOSE_SDIOCORESWITCH_DEBUG 0 ++ ++ ++/* Hardware invariants CIS tuples */ ++#define SSB_SDIO_CIS 0x80 ++#define SSB_SDIO_CIS_SROMREV 0x00 ++#define SSB_SDIO_CIS_ID 0x01 ++#define SSB_SDIO_CIS_BOARDREV 0x02 ++#define SSB_SDIO_CIS_PA 0x03 ++#define SSB_SDIO_CIS_PA_PA0B0_LO 0 ++#define SSB_SDIO_CIS_PA_PA0B0_HI 1 ++#define SSB_SDIO_CIS_PA_PA0B1_LO 2 ++#define SSB_SDIO_CIS_PA_PA0B1_HI 3 ++#define SSB_SDIO_CIS_PA_PA0B2_LO 4 ++#define SSB_SDIO_CIS_PA_PA0B2_HI 5 ++#define SSB_SDIO_CIS_PA_ITSSI 6 ++#define SSB_SDIO_CIS_PA_MAXPOW 7 ++#define SSB_SDIO_CIS_OEMNAME 0x04 ++#define SSB_SDIO_CIS_CCODE 0x05 ++#define SSB_SDIO_CIS_ANTENNA 0x06 ++#define SSB_SDIO_CIS_ANTGAIN 0x07 ++#define SSB_SDIO_CIS_BFLAGS 0x08 ++#define SSB_SDIO_CIS_LEDS 0x09 ++ ++#define CISTPL_FUNCE_LAN_NODE_ID 0x04 /* same as in PCMCIA */ ++ ++ ++/* ++ * Function 1 miscellaneous registers. ++ * ++ * Definitions match src/include/sbsdio.h from the ++ * Android Open Source Project ++ * http://android.git.kernel.org/?p=platform/system/wlan/broadcom.git ++ * ++ */ ++#define SBSDIO_FUNC1_SBADDRLOW 0x1000a /* SB Address window Low (b15) */ ++#define SBSDIO_FUNC1_SBADDRMID 0x1000b /* SB Address window Mid (b23-b16) */ ++#define SBSDIO_FUNC1_SBADDRHIGH 0x1000c /* SB Address window High (b24-b31) */ ++ ++/* valid bits in SBSDIO_FUNC1_SBADDRxxx regs */ ++#define SBSDIO_SBADDRLOW_MASK 0x80 /* Valid address bits in SBADDRLOW */ ++#define SBSDIO_SBADDRMID_MASK 0xff /* Valid address bits in SBADDRMID */ ++#define SBSDIO_SBADDRHIGH_MASK 0xff /* Valid address bits in SBADDRHIGH */ ++ ++#define SBSDIO_SB_OFT_ADDR_MASK 0x7FFF /* sb offset addr is <= 15 bits, 32k */ ++ ++/* REVISIT: this flag doesn't seem to matter */ ++#define SBSDIO_SB_ACCESS_2_4B_FLAG 0x8000 /* forces 32-bit SB access */ ++ ++ ++/* ++ * Address map within the SDIO function address space (128K). ++ * ++ * Start End Description ++ * ------- ------- ------------------------------------------ ++ * 0x00000 0x0ffff selected backplane address window (64K) ++ * 0x10000 0x1ffff backplane control registers (max 64K) ++ * ++ * The current address window is configured by writing to registers ++ * SBADDRLOW, SBADDRMID and SBADDRHIGH. ++ * ++ * In order to access the contents of a 32-bit Silicon Backplane address ++ * the backplane address window must be first loaded with the highest ++ * 16 bits of the target address. Then, an access must be done to the ++ * SDIO function address space using the lower 15 bits of the address. ++ * Bit 15 of the address must be set when doing 32 bit accesses. ++ * ++ * 10987654321098765432109876543210 ++ * WWWWWWWWWWWWWWWWW SB Address Window ++ * OOOOOOOOOOOOOOOO Offset within SB Address Window ++ * a 32-bit access flag ++ */ ++ ++ ++/* ++ * SSB I/O via SDIO. ++ * ++ * NOTE: SDIO address @addr is 17 bits long (SDIO address space is 128K). ++ */ ++ ++static inline struct device *ssb_sdio_dev(struct ssb_bus *bus) ++{ ++ return &bus->host_sdio->dev; ++} ++ ++/* host claimed */ ++static int ssb_sdio_writeb(struct ssb_bus *bus, unsigned int addr, u8 val) ++{ ++ int error = 0; ++ ++ sdio_writeb(bus->host_sdio, val, addr, &error); ++ if (unlikely(error)) { ++ dev_dbg(ssb_sdio_dev(bus), "%08X <- %02x, error %d\n", ++ addr, val, error); ++ } ++ ++ return error; ++} ++ ++#if 0 ++static u8 ssb_sdio_readb(struct ssb_bus *bus, unsigned int addr) ++{ ++ u8 val; ++ int error = 0; ++ ++ val = sdio_readb(bus->host_sdio, addr, &error); ++ if (unlikely(error)) { ++ dev_dbg(ssb_sdio_dev(bus), "%08X -> %02x, error %d\n", ++ addr, val, error); ++ } ++ ++ return val; ++} ++#endif ++ ++/* host claimed */ ++static int ssb_sdio_set_sbaddr_window(struct ssb_bus *bus, u32 address) ++{ ++ int error; ++ ++ error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRLOW, ++ (address >> 8) & SBSDIO_SBADDRLOW_MASK); ++ if (error) ++ goto out; ++ error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRMID, ++ (address >> 16) & SBSDIO_SBADDRMID_MASK); ++ if (error) ++ goto out; ++ error = ssb_sdio_writeb(bus, SBSDIO_FUNC1_SBADDRHIGH, ++ (address >> 24) & SBSDIO_SBADDRHIGH_MASK); ++ if (error) ++ goto out; ++ bus->sdio_sbaddr = address; ++out: ++ if (error) { ++ dev_dbg(ssb_sdio_dev(bus), "failed to set address window" ++ " to 0x%08x, error %d\n", address, error); ++ } ++ ++ return error; ++} ++ ++/* for enumeration use only */ ++u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset) ++{ ++ u32 val; ++ int error; ++ ++ sdio_claim_host(bus->host_sdio); ++ val = sdio_readl(bus->host_sdio, offset, &error); ++ sdio_release_host(bus->host_sdio); ++ if (unlikely(error)) { ++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n", ++ bus->sdio_sbaddr >> 16, offset, val, error); ++ } ++ ++ return val; ++} ++ ++/* for enumeration use only */ ++int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx) ++{ ++ u32 sbaddr; ++ int error; ++ ++ sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE; ++ sdio_claim_host(bus->host_sdio); ++ error = ssb_sdio_set_sbaddr_window(bus, sbaddr); ++ sdio_release_host(bus->host_sdio); ++ if (error) { ++ dev_err(ssb_sdio_dev(bus), "failed to switch to core %u," ++ " error %d\n", coreidx, error); ++ goto out; ++ } ++out: ++ return error; ++} ++ ++/* host must be already claimed */ ++int ssb_sdio_switch_core(struct ssb_bus *bus, struct ssb_device *dev) ++{ ++ u8 coreidx = dev->core_index; ++ u32 sbaddr; ++ int error = 0; ++ ++ sbaddr = (coreidx * SSB_CORE_SIZE) + SSB_ENUM_BASE; ++ if (unlikely(bus->sdio_sbaddr != sbaddr)) { ++#if SSB_VERBOSE_SDIOCORESWITCH_DEBUG ++ dev_info(ssb_sdio_dev(bus), ++ "switching to %s core, index %d\n", ++ ssb_core_name(dev->id.coreid), coreidx); ++#endif ++ error = ssb_sdio_set_sbaddr_window(bus, sbaddr); ++ if (error) { ++ dev_dbg(ssb_sdio_dev(bus), "failed to switch to" ++ " core %u, error %d\n", coreidx, error); ++ goto out; ++ } ++ bus->mapped_device = dev; ++ } ++ ++out: ++ return error; ++} ++ ++static u8 ssb_sdio_read8(struct ssb_device *dev, u16 offset) ++{ ++ struct ssb_bus *bus = dev->bus; ++ u8 val = 0xff; ++ int error = 0; ++ ++ sdio_claim_host(bus->host_sdio); ++ if (unlikely(ssb_sdio_switch_core(bus, dev))) ++ goto out; ++ offset |= bus->sdio_sbaddr & 0xffff; ++ offset &= SBSDIO_SB_OFT_ADDR_MASK; ++ val = sdio_readb(bus->host_sdio, offset, &error); ++ if (error) { ++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %02x, error %d\n", ++ bus->sdio_sbaddr >> 16, offset, val, error); ++ } ++out: ++ sdio_release_host(bus->host_sdio); ++ ++ return val; ++} ++ ++static u16 ssb_sdio_read16(struct ssb_device *dev, u16 offset) ++{ ++ struct ssb_bus *bus = dev->bus; ++ u16 val = 0xffff; ++ int error = 0; ++ ++ sdio_claim_host(bus->host_sdio); ++ if (unlikely(ssb_sdio_switch_core(bus, dev))) ++ goto out; ++ offset |= bus->sdio_sbaddr & 0xffff; ++ offset &= SBSDIO_SB_OFT_ADDR_MASK; ++ val = sdio_readw(bus->host_sdio, offset, &error); ++ if (error) { ++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %04x, error %d\n", ++ bus->sdio_sbaddr >> 16, offset, val, error); ++ } ++out: ++ sdio_release_host(bus->host_sdio); ++ ++ return val; ++} ++ ++static u32 ssb_sdio_read32(struct ssb_device *dev, u16 offset) ++{ ++ struct ssb_bus *bus = dev->bus; ++ u32 val = 0xffffffff; ++ int error = 0; ++ ++ sdio_claim_host(bus->host_sdio); ++ if (unlikely(ssb_sdio_switch_core(bus, dev))) ++ goto out; ++ offset |= bus->sdio_sbaddr & 0xffff; ++ offset &= SBSDIO_SB_OFT_ADDR_MASK; ++ offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */ ++ val = sdio_readl(bus->host_sdio, offset, &error); ++ if (error) { ++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X > %08x, error %d\n", ++ bus->sdio_sbaddr >> 16, offset, val, error); ++ } ++out: ++ sdio_release_host(bus->host_sdio); ++ ++ return val; ++} ++ ++#ifdef CONFIG_SSB_BLOCKIO ++static void ssb_sdio_block_read(struct ssb_device *dev, void *buffer, ++ size_t count, u16 offset, u8 reg_width) ++{ ++ size_t saved_count = count; ++ struct ssb_bus *bus = dev->bus; ++ int error = 0; ++ ++ sdio_claim_host(bus->host_sdio); ++ if (unlikely(ssb_sdio_switch_core(bus, dev))) { ++ error = -EIO; ++ memset(buffer, 0xff, count); ++ goto err_out; ++ } ++ offset |= bus->sdio_sbaddr & 0xffff; ++ offset &= SBSDIO_SB_OFT_ADDR_MASK; ++ ++ switch (reg_width) { ++ case sizeof(u8): { ++ error = sdio_readsb(bus->host_sdio, buffer, offset, count); ++ break; ++ } ++ case sizeof(u16): { ++ SSB_WARN_ON(count & 1); ++ error = sdio_readsb(bus->host_sdio, buffer, offset, count); ++ break; ++ } ++ case sizeof(u32): { ++ SSB_WARN_ON(count & 3); ++ offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */ ++ error = sdio_readsb(bus->host_sdio, buffer, offset, count); ++ break; ++ } ++ default: ++ SSB_WARN_ON(1); ++ } ++ if (!error) ++ goto out; ++ ++err_out: ++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%zu), error %d\n", ++ bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error); ++out: ++ sdio_release_host(bus->host_sdio); ++} ++#endif /* CONFIG_SSB_BLOCKIO */ ++ ++static void ssb_sdio_write8(struct ssb_device *dev, u16 offset, u8 val) ++{ ++ struct ssb_bus *bus = dev->bus; ++ int error = 0; ++ ++ sdio_claim_host(bus->host_sdio); ++ if (unlikely(ssb_sdio_switch_core(bus, dev))) ++ goto out; ++ offset |= bus->sdio_sbaddr & 0xffff; ++ offset &= SBSDIO_SB_OFT_ADDR_MASK; ++ sdio_writeb(bus->host_sdio, val, offset, &error); ++ if (error) { ++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %02x, error %d\n", ++ bus->sdio_sbaddr >> 16, offset, val, error); ++ } ++out: ++ sdio_release_host(bus->host_sdio); ++} ++ ++static void ssb_sdio_write16(struct ssb_device *dev, u16 offset, u16 val) ++{ ++ struct ssb_bus *bus = dev->bus; ++ int error = 0; ++ ++ sdio_claim_host(bus->host_sdio); ++ if (unlikely(ssb_sdio_switch_core(bus, dev))) ++ goto out; ++ offset |= bus->sdio_sbaddr & 0xffff; ++ offset &= SBSDIO_SB_OFT_ADDR_MASK; ++ sdio_writew(bus->host_sdio, val, offset, &error); ++ if (error) { ++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %04x, error %d\n", ++ bus->sdio_sbaddr >> 16, offset, val, error); ++ } ++out: ++ sdio_release_host(bus->host_sdio); ++} ++ ++static void ssb_sdio_write32(struct ssb_device *dev, u16 offset, u32 val) ++{ ++ struct ssb_bus *bus = dev->bus; ++ int error = 0; ++ ++ sdio_claim_host(bus->host_sdio); ++ if (unlikely(ssb_sdio_switch_core(bus, dev))) ++ goto out; ++ offset |= bus->sdio_sbaddr & 0xffff; ++ offset &= SBSDIO_SB_OFT_ADDR_MASK; ++ offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */ ++ sdio_writel(bus->host_sdio, val, offset, &error); ++ if (error) { ++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X < %08x, error %d\n", ++ bus->sdio_sbaddr >> 16, offset, val, error); ++ } ++ if (bus->quirks & SSB_QUIRK_SDIO_READ_AFTER_WRITE32) ++ sdio_readl(bus->host_sdio, 0, &error); ++out: ++ sdio_release_host(bus->host_sdio); ++} ++ ++#ifdef CONFIG_SSB_BLOCKIO ++static void ssb_sdio_block_write(struct ssb_device *dev, const void *buffer, ++ size_t count, u16 offset, u8 reg_width) ++{ ++ size_t saved_count = count; ++ struct ssb_bus *bus = dev->bus; ++ int error = 0; ++ ++ sdio_claim_host(bus->host_sdio); ++ if (unlikely(ssb_sdio_switch_core(bus, dev))) { ++ error = -EIO; ++ memset((void *)buffer, 0xff, count); ++ goto err_out; ++ } ++ offset |= bus->sdio_sbaddr & 0xffff; ++ offset &= SBSDIO_SB_OFT_ADDR_MASK; ++ ++ switch (reg_width) { ++ case sizeof(u8): ++ error = sdio_writesb(bus->host_sdio, offset, ++ (void *)buffer, count); ++ break; ++ case sizeof(u16): ++ SSB_WARN_ON(count & 1); ++ error = sdio_writesb(bus->host_sdio, offset, ++ (void *)buffer, count); ++ break; ++ case sizeof(u32): ++ SSB_WARN_ON(count & 3); ++ offset |= SBSDIO_SB_ACCESS_2_4B_FLAG; /* 32 bit data access */ ++ error = sdio_writesb(bus->host_sdio, offset, ++ (void *)buffer, count); ++ break; ++ default: ++ SSB_WARN_ON(1); ++ } ++ if (!error) ++ goto out; ++ ++err_out: ++ dev_dbg(ssb_sdio_dev(bus), "%04X:%04X (width=%u, len=%zu), error %d\n", ++ bus->sdio_sbaddr >> 16, offset, reg_width, saved_count, error); ++out: ++ sdio_release_host(bus->host_sdio); ++} ++ ++#endif /* CONFIG_SSB_BLOCKIO */ ++ ++/* Not "static", as it's used in main.c */ ++const struct ssb_bus_ops ssb_sdio_ops = { ++ .read8 = ssb_sdio_read8, ++ .read16 = ssb_sdio_read16, ++ .read32 = ssb_sdio_read32, ++ .write8 = ssb_sdio_write8, ++ .write16 = ssb_sdio_write16, ++ .write32 = ssb_sdio_write32, ++#ifdef CONFIG_SSB_BLOCKIO ++ .block_read = ssb_sdio_block_read, ++ .block_write = ssb_sdio_block_write, ++#endif ++}; ++ ++#define GOTO_ERROR_ON(condition, description) do { \ ++ if (unlikely(condition)) { \ ++ error_description = description; \ ++ goto error; \ ++ } \ ++ } while (0) ++ ++int ssb_sdio_get_invariants(struct ssb_bus *bus, ++ struct ssb_init_invariants *iv) ++{ ++ struct ssb_sprom *sprom = &iv->sprom; ++ struct ssb_boardinfo *bi = &iv->boardinfo; ++ const char *error_description = "none"; ++ struct sdio_func_tuple *tuple; ++ void *mac; ++ ++ memset(sprom, 0xFF, sizeof(*sprom)); ++ sprom->boardflags_lo = 0; ++ sprom->boardflags_hi = 0; ++ ++ tuple = bus->host_sdio->tuples; ++ while (tuple) { ++ switch (tuple->code) { ++ case 0x22: /* extended function */ ++ switch (tuple->data[0]) { ++ case CISTPL_FUNCE_LAN_NODE_ID: ++ GOTO_ERROR_ON((tuple->size != 7) && ++ (tuple->data[1] != 6), ++ "mac tpl size"); ++ /* fetch the MAC address. */ ++ mac = tuple->data + 2; ++ memcpy(sprom->il0mac, mac, ETH_ALEN); ++ memcpy(sprom->et1mac, mac, ETH_ALEN); ++ break; ++ default: ++ break; ++ } ++ break; ++ case 0x80: /* vendor specific tuple */ ++ switch (tuple->data[0]) { ++ case SSB_SDIO_CIS_SROMREV: ++ GOTO_ERROR_ON(tuple->size != 2, ++ "sromrev tpl size"); ++ sprom->revision = tuple->data[1]; ++ break; ++ case SSB_SDIO_CIS_ID: ++ GOTO_ERROR_ON((tuple->size != 5) && ++ (tuple->size != 7), ++ "id tpl size"); ++ bi->vendor = tuple->data[1] | ++ (tuple->data[2]<<8); ++ break; ++ case SSB_SDIO_CIS_BOARDREV: ++ GOTO_ERROR_ON(tuple->size != 2, ++ "boardrev tpl size"); ++ sprom->board_rev = tuple->data[1]; ++ break; ++ case SSB_SDIO_CIS_PA: ++ GOTO_ERROR_ON((tuple->size != 9) && ++ (tuple->size != 10), ++ "pa tpl size"); ++ sprom->pa0b0 = tuple->data[1] | ++ ((u16)tuple->data[2] << 8); ++ sprom->pa0b1 = tuple->data[3] | ++ ((u16)tuple->data[4] << 8); ++ sprom->pa0b2 = tuple->data[5] | ++ ((u16)tuple->data[6] << 8); ++ sprom->itssi_a = tuple->data[7]; ++ sprom->itssi_bg = tuple->data[7]; ++ sprom->maxpwr_a = tuple->data[8]; ++ sprom->maxpwr_bg = tuple->data[8]; ++ break; ++ case SSB_SDIO_CIS_OEMNAME: ++ /* Not present */ ++ break; ++ case SSB_SDIO_CIS_CCODE: ++ GOTO_ERROR_ON(tuple->size != 2, ++ "ccode tpl size"); ++ sprom->country_code = tuple->data[1]; ++ break; ++ case SSB_SDIO_CIS_ANTENNA: ++ GOTO_ERROR_ON(tuple->size != 2, ++ "ant tpl size"); ++ sprom->ant_available_a = tuple->data[1]; ++ sprom->ant_available_bg = tuple->data[1]; ++ break; ++ case SSB_SDIO_CIS_ANTGAIN: ++ GOTO_ERROR_ON(tuple->size != 2, ++ "antg tpl size"); ++ sprom->antenna_gain.ghz24.a0 = tuple->data[1]; ++ sprom->antenna_gain.ghz24.a1 = tuple->data[1]; ++ sprom->antenna_gain.ghz24.a2 = tuple->data[1]; ++ sprom->antenna_gain.ghz24.a3 = tuple->data[1]; ++ sprom->antenna_gain.ghz5.a0 = tuple->data[1]; ++ sprom->antenna_gain.ghz5.a1 = tuple->data[1]; ++ sprom->antenna_gain.ghz5.a2 = tuple->data[1]; ++ sprom->antenna_gain.ghz5.a3 = tuple->data[1]; ++ break; ++ case SSB_SDIO_CIS_BFLAGS: ++ GOTO_ERROR_ON((tuple->size != 3) && ++ (tuple->size != 5), ++ "bfl tpl size"); ++ sprom->boardflags_lo = tuple->data[1] | ++ ((u16)tuple->data[2] << 8); ++ break; ++ case SSB_SDIO_CIS_LEDS: ++ GOTO_ERROR_ON(tuple->size != 5, ++ "leds tpl size"); ++ sprom->gpio0 = tuple->data[1]; ++ sprom->gpio1 = tuple->data[2]; ++ sprom->gpio2 = tuple->data[3]; ++ sprom->gpio3 = tuple->data[4]; ++ break; ++ default: ++ break; ++ } ++ break; ++ default: ++ break; ++ } ++ tuple = tuple->next; ++ } ++ ++ return 0; ++error: ++ dev_err(ssb_sdio_dev(bus), "failed to fetch device invariants: %s\n", ++ error_description); ++ return -ENODEV; ++} ++ ++void ssb_sdio_exit(struct ssb_bus *bus) ++{ ++ if (bus->bustype != SSB_BUSTYPE_SDIO) ++ return; ++ /* Nothing to do here. */ ++} ++ ++int ssb_sdio_init(struct ssb_bus *bus) ++{ ++ if (bus->bustype != SSB_BUSTYPE_SDIO) ++ return 0; ++ ++ bus->sdio_sbaddr = ~0; ++ ++ return 0; ++} +--- a/drivers/ssb/sprom.c ++++ b/drivers/ssb/sprom.c +@@ -13,8 +13,11 @@ + + #include "ssb_private.h" + ++#include ++#include + +-static const struct ssb_sprom *fallback_sprom; ++ ++static int(*get_fallback_sprom)(struct ssb_bus *dev, struct ssb_sprom *out); + + + static int sprom2hex(const u16 *sprom, char *buf, size_t buf_len, +@@ -33,17 +36,27 @@ static int sprom2hex(const u16 *sprom, c + static int hex2sprom(u16 *sprom, const char *dump, size_t len, + size_t sprom_size_words) + { +- char tmp[5] = { 0 }; +- int cnt = 0; ++ char c, tmp[5] = { 0 }; ++ int err, cnt = 0; + unsigned long parsed; + +- if (len < sprom_size_words * 2) ++ /* Strip whitespace at the end. */ ++ while (len) { ++ c = dump[len - 1]; ++ if (!isspace(c) && c != '\0') ++ break; ++ len--; ++ } ++ /* Length must match exactly. */ ++ if (len != sprom_size_words * 4) + return -EINVAL; + + while (cnt < sprom_size_words) { + memcpy(tmp, dump, 4); + dump += 4; +- parsed = simple_strtoul(tmp, NULL, 16); ++ err = strict_strtoul(tmp, 16, &parsed); ++ if (err) ++ return err; + sprom[cnt++] = swab16((u16)parsed); + } + +@@ -90,6 +103,7 @@ ssize_t ssb_attr_sprom_store(struct ssb_ + u16 *sprom; + int res = 0, err = -ENOMEM; + size_t sprom_size_words = bus->sprom_size; ++ struct ssb_freeze_context freeze; + + sprom = kcalloc(bus->sprom_size, sizeof(u16), GFP_KERNEL); + if (!sprom) +@@ -111,18 +125,13 @@ ssize_t ssb_attr_sprom_store(struct ssb_ + err = -ERESTARTSYS; + if (mutex_lock_interruptible(&bus->sprom_mutex)) + goto out_kfree; +- err = ssb_devices_freeze(bus); +- if (err == -EOPNOTSUPP) { +- ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze devices. " +- "No suspend support. Is CONFIG_PM enabled?\n"); +- goto out_unlock; +- } ++ err = ssb_devices_freeze(bus, &freeze); + if (err) { + ssb_printk(KERN_ERR PFX "SPROM write: Could not freeze all devices\n"); + goto out_unlock; + } + res = sprom_write(bus, sprom); +- err = ssb_devices_thaw(bus); ++ err = ssb_devices_thaw(&freeze); + if (err) + ssb_printk(KERN_ERR PFX "SPROM write: Could not thaw all devices\n"); + out_unlock: +@@ -136,34 +145,56 @@ out: + } + + /** +- * ssb_arch_set_fallback_sprom - Set a fallback SPROM for use if no SPROM is found. ++ * ssb_arch_register_fallback_sprom - Registers a method providing a ++ * fallback SPROM if no SPROM is found. + * +- * @sprom: The SPROM data structure to register. ++ * @sprom_callback: The callback function. + * +- * With this function the architecture implementation may register a fallback +- * SPROM data structure. The fallback is only used for PCI based SSB devices, +- * where no valid SPROM can be found in the shadow registers. ++ * With this function the architecture implementation may register a ++ * callback handler which fills the SPROM data structure. The fallback is ++ * only used for PCI based SSB devices, where no valid SPROM can be found ++ * in the shadow registers. + * +- * This function is useful for weird architectures that have a half-assed SSB device +- * hardwired to their PCI bus. ++ * This function is useful for weird architectures that have a half-assed ++ * SSB device hardwired to their PCI bus. + * +- * Note that it does only work with PCI attached SSB devices. PCMCIA devices currently +- * don't use this fallback. +- * Architectures must provide the SPROM for native SSB devices anyway, +- * so the fallback also isn't used for native devices. ++ * Note that it does only work with PCI attached SSB devices. PCMCIA ++ * devices currently don't use this fallback. ++ * Architectures must provide the SPROM for native SSB devices anyway, so ++ * the fallback also isn't used for native devices. + * +- * This function is available for architecture code, only. So it is not exported. ++ * This function is available for architecture code, only. So it is not ++ * exported. + */ +-int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom) ++int ssb_arch_register_fallback_sprom(int (*sprom_callback)(struct ssb_bus *bus, ++ struct ssb_sprom *out)) + { +- if (fallback_sprom) ++ if (get_fallback_sprom) + return -EEXIST; +- fallback_sprom = sprom; ++ get_fallback_sprom = sprom_callback; + + return 0; + } + +-const struct ssb_sprom *ssb_get_fallback_sprom(void) ++int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, struct ssb_sprom *out) + { +- return fallback_sprom; ++ if (!get_fallback_sprom) ++ return -ENOENT; ++ ++ return get_fallback_sprom(bus, out); ++} ++ ++/* http://bcm-v4.sipsolutions.net/802.11/IsSpromAvailable */ ++bool ssb_is_sprom_available(struct ssb_bus *bus) ++{ ++ /* status register only exists on chipcomon rev >= 11 and we need check ++ for >= 31 only */ ++ /* this routine differs from specs as we do not access SPROM directly ++ on PCMCIA */ ++ if (bus->bustype == SSB_BUSTYPE_PCI && ++ bus->chipco.dev && /* can be unavailable! */ ++ bus->chipco.dev->id.revision >= 31) ++ return bus->chipco.capabilities & SSB_CHIPCO_CAP_SPROM; ++ ++ return true; + } +--- a/drivers/ssb/ssb_private.h ++++ b/drivers/ssb/ssb_private.h +@@ -114,6 +114,46 @@ static inline int ssb_pcmcia_init(struct + } + #endif /* CONFIG_SSB_PCMCIAHOST */ + ++/* sdio.c */ ++#ifdef CONFIG_SSB_SDIOHOST ++extern int ssb_sdio_get_invariants(struct ssb_bus *bus, ++ struct ssb_init_invariants *iv); ++ ++extern u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset); ++extern int ssb_sdio_switch_core(struct ssb_bus *bus, struct ssb_device *dev); ++extern int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx); ++extern int ssb_sdio_hardware_setup(struct ssb_bus *bus); ++extern void ssb_sdio_exit(struct ssb_bus *bus); ++extern int ssb_sdio_init(struct ssb_bus *bus); ++ ++extern const struct ssb_bus_ops ssb_sdio_ops; ++#else /* CONFIG_SSB_SDIOHOST */ ++static inline u32 ssb_sdio_scan_read32(struct ssb_bus *bus, u16 offset) ++{ ++ return 0; ++} ++static inline int ssb_sdio_switch_core(struct ssb_bus *bus, ++ struct ssb_device *dev) ++{ ++ return 0; ++} ++static inline int ssb_sdio_scan_switch_coreidx(struct ssb_bus *bus, u8 coreidx) ++{ ++ return 0; ++} ++static inline int ssb_sdio_hardware_setup(struct ssb_bus *bus) ++{ ++ return 0; ++} ++static inline void ssb_sdio_exit(struct ssb_bus *bus) ++{ ++} ++static inline int ssb_sdio_init(struct ssb_bus *bus) ++{ ++ return 0; ++} ++#endif /* CONFIG_SSB_SDIOHOST */ ++ + + /* scan.c */ + extern const char *ssb_core_name(u16 coreid); +@@ -131,24 +171,33 @@ ssize_t ssb_attr_sprom_store(struct ssb_ + const char *buf, size_t count, + int (*sprom_check_crc)(const u16 *sprom, size_t size), + int (*sprom_write)(struct ssb_bus *bus, const u16 *sprom)); +-extern const struct ssb_sprom *ssb_get_fallback_sprom(void); ++extern int ssb_fill_sprom_with_fallback(struct ssb_bus *bus, ++ struct ssb_sprom *out); + + + /* core.c */ + extern u32 ssb_calc_clock_rate(u32 plltype, u32 n, u32 m); +-extern int ssb_devices_freeze(struct ssb_bus *bus); +-extern int ssb_devices_thaw(struct ssb_bus *bus); + extern struct ssb_bus *ssb_pci_dev_to_bus(struct pci_dev *pdev); + int ssb_for_each_bus_call(unsigned long data, + int (*func)(struct ssb_bus *bus, unsigned long data)); + extern struct ssb_bus *ssb_pcmcia_dev_to_bus(struct pcmcia_device *pdev); + ++struct ssb_freeze_context { ++ /* Pointer to the bus */ ++ struct ssb_bus *bus; ++ /* Boolean list to indicate whether a device is frozen on this bus. */ ++ bool device_frozen[SSB_MAX_NR_CORES]; ++}; ++extern int ssb_devices_freeze(struct ssb_bus *bus, struct ssb_freeze_context *ctx); ++extern int ssb_devices_thaw(struct ssb_freeze_context *ctx); ++ ++ + + /* b43_pci_bridge.c */ + #ifdef CONFIG_SSB_B43_PCI_BRIDGE + extern int __init b43_pci_ssb_bridge_init(void); + extern void __exit b43_pci_ssb_bridge_exit(void); +-#else /* CONFIG_SSB_B43_PCI_BRIDGR */ ++#else /* CONFIG_SSB_B43_PCI_BRIDGE */ + static inline int b43_pci_ssb_bridge_init(void) + { + return 0; +@@ -156,6 +205,6 @@ static inline int b43_pci_ssb_bridge_ini + static inline void b43_pci_ssb_bridge_exit(void) + { + } +-#endif /* CONFIG_SSB_PCIHOST */ ++#endif /* CONFIG_SSB_B43_PCI_BRIDGE */ + + #endif /* LINUX_SSB_PRIVATE_H_ */ +--- a/include/linux/pci_ids.h ++++ b/include/linux/pci_ids.h +@@ -2034,6 +2034,7 @@ + #define PCI_DEVICE_ID_AFAVLAB_P030 0x2182 + #define PCI_SUBDEVICE_ID_AFAVLAB_P061 0x2150 + ++#define PCI_VENDOR_ID_BCM_GVC 0x14a4 + #define PCI_VENDOR_ID_BROADCOM 0x14e4 + #define PCI_DEVICE_ID_TIGON3_5752 0x1600 + #define PCI_DEVICE_ID_TIGON3_5752M 0x1601 +--- a/include/linux/ssb/ssb.h ++++ b/include/linux/ssb/ssb.h +@@ -27,24 +27,60 @@ struct ssb_sprom { + u8 et1mdcport; /* MDIO for enet1 */ + u8 board_rev; /* Board revision number from SPROM. */ + u8 country_code; /* Country Code */ +- u8 ant_available_a; /* A-PHY antenna available bits (up to 4) */ +- u8 ant_available_bg; /* B/G-PHY antenna available bits (up to 4) */ ++ u16 leddc_on_time; /* LED Powersave Duty Cycle On Count */ ++ u16 leddc_off_time; /* LED Powersave Duty Cycle Off Count */ ++ u8 ant_available_a; /* 2GHz antenna available bits (up to 4) */ ++ u8 ant_available_bg; /* 5GHz antenna available bits (up to 4) */ + u16 pa0b0; + u16 pa0b1; + u16 pa0b2; + u16 pa1b0; + u16 pa1b1; + u16 pa1b2; ++ u16 pa1lob0; ++ u16 pa1lob1; ++ u16 pa1lob2; ++ u16 pa1hib0; ++ u16 pa1hib1; ++ u16 pa1hib2; + u8 gpio0; /* GPIO pin 0 */ + u8 gpio1; /* GPIO pin 1 */ + u8 gpio2; /* GPIO pin 2 */ + u8 gpio3; /* GPIO pin 3 */ +- u16 maxpwr_a; /* A-PHY Amplifier Max Power (in dBm Q5.2) */ +- u16 maxpwr_bg; /* B/G-PHY Amplifier Max Power (in dBm Q5.2) */ ++ u16 maxpwr_bg; /* 2.4GHz Amplifier Max Power (in dBm Q5.2) */ ++ u16 maxpwr_al; /* 5.2GHz Amplifier Max Power (in dBm Q5.2) */ ++ u16 maxpwr_a; /* 5.3GHz Amplifier Max Power (in dBm Q5.2) */ ++ u16 maxpwr_ah; /* 5.8GHz Amplifier Max Power (in dBm Q5.2) */ + u8 itssi_a; /* Idle TSSI Target for A-PHY */ + u8 itssi_bg; /* Idle TSSI Target for B/G-PHY */ +- u16 boardflags_lo; /* Boardflags (low 16 bits) */ +- u16 boardflags_hi; /* Boardflags (high 16 bits) */ ++ u8 tri2g; /* 2.4GHz TX isolation */ ++ u8 tri5gl; /* 5.2GHz TX isolation */ ++ u8 tri5g; /* 5.3GHz TX isolation */ ++ u8 tri5gh; /* 5.8GHz TX isolation */ ++ u8 txpid2g[4]; /* 2GHz TX power index */ ++ u8 txpid5gl[4]; /* 4.9 - 5.1GHz TX power index */ ++ u8 txpid5g[4]; /* 5.1 - 5.5GHz TX power index */ ++ u8 txpid5gh[4]; /* 5.5 - ...GHz TX power index */ ++ u8 rxpo2g; /* 2GHz RX power offset */ ++ u8 rxpo5g; /* 5GHz RX power offset */ ++ u8 rssisav2g; /* 2GHz RSSI params */ ++ u8 rssismc2g; ++ u8 rssismf2g; ++ u8 bxa2g; /* 2GHz BX arch */ ++ u8 rssisav5g; /* 5GHz RSSI params */ ++ u8 rssismc5g; ++ u8 rssismf5g; ++ u8 bxa5g; /* 5GHz BX arch */ ++ u16 cck2gpo; /* CCK power offset */ ++ u32 ofdm2gpo; /* 2.4GHz OFDM power offset */ ++ u32 ofdm5glpo; /* 5.2GHz OFDM power offset */ ++ u32 ofdm5gpo; /* 5.3GHz OFDM power offset */ ++ u32 ofdm5ghpo; /* 5.8GHz OFDM power offset */ ++ u16 boardflags_lo; /* Board flags (bits 0-15) */ ++ u16 boardflags_hi; /* Board flags (bits 16-31) */ ++ u16 boardflags2_lo; /* Board flags (bits 32-47) */ ++ u16 boardflags2_hi; /* Board flags (bits 48-63) */ ++ /* TODO store board flags in a single u64 */ + + /* Antenna gain values for up to 4 antennas + * on each band. Values in dBm/4 (Q5.2). Negative gain means the +@@ -58,14 +94,14 @@ struct ssb_sprom { + } ghz5; /* 5GHz band */ + } antenna_gain; + +- /* TODO - add any parameters needed from rev 2, 3, or 4 SPROMs */ ++ /* TODO - add any parameters needed from rev 2, 3, 4, 5 or 8 SPROMs */ + }; + + /* Information about the PCB the circuitry is soldered on. */ + struct ssb_boardinfo { + u16 vendor; + u16 type; +- u16 rev; ++ u8 rev; + }; + + +@@ -137,7 +173,7 @@ struct ssb_device { + * is an optimization. */ + const struct ssb_bus_ops *ops; + +- struct device *dev; ++ struct device *dev, *dma_dev; + + struct ssb_bus *bus; + struct ssb_device_id id; +@@ -208,6 +244,7 @@ enum ssb_bustype { + SSB_BUSTYPE_SSB, /* This SSB bus is the system bus */ + SSB_BUSTYPE_PCI, /* SSB is connected to PCI bus */ + SSB_BUSTYPE_PCMCIA, /* SSB is connected to PCMCIA bus */ ++ SSB_BUSTYPE_SDIO, /* SSB is connected to SDIO bus */ + }; + + /* board_vendor */ +@@ -238,20 +275,33 @@ struct ssb_bus { + + const struct ssb_bus_ops *ops; + +- /* The core in the basic address register window. (PCI bus only) */ ++ /* The core currently mapped into the MMIO window. ++ * Not valid on all host-buses. So don't use outside of SSB. */ + struct ssb_device *mapped_device; +- /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ +- u8 mapped_pcmcia_seg; ++ union { ++ /* Currently mapped PCMCIA segment. (bustype == SSB_BUSTYPE_PCMCIA only) */ ++ u8 mapped_pcmcia_seg; ++ /* Current SSB base address window for SDIO. */ ++ u32 sdio_sbaddr; ++ }; + /* Lock for core and segment switching. + * On PCMCIA-host busses this is used to protect the whole MMIO access. */ + spinlock_t bar_lock; + +- /* The bus this backplane is running on. */ ++ /* The host-bus this backplane is running on. */ + enum ssb_bustype bustype; +- /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */ +- struct pci_dev *host_pci; +- /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */ +- struct pcmcia_device *host_pcmcia; ++ /* Pointers to the host-bus. Check bustype before using any of these pointers. */ ++ union { ++ /* Pointer to the PCI bus (only valid if bustype == SSB_BUSTYPE_PCI). */ ++ struct pci_dev *host_pci; ++ /* Pointer to the PCMCIA device (only if bustype == SSB_BUSTYPE_PCMCIA). */ ++ struct pcmcia_device *host_pcmcia; ++ /* Pointer to the SDIO device (only if bustype == SSB_BUSTYPE_SDIO). */ ++ struct sdio_func *host_sdio; ++ }; ++ ++ /* See enum ssb_quirks */ ++ unsigned int quirks; + + #ifdef CONFIG_SSB_SPROM + /* Mutex to protect the SPROM writing. */ +@@ -260,7 +310,8 @@ struct ssb_bus { + + /* ID information about the Chip. */ + u16 chip_id; +- u16 chip_rev; ++ u8 chip_rev; ++ u16 sprom_offset; + u16 sprom_size; /* number of words in sprom */ + u8 chip_package; + +@@ -306,6 +357,11 @@ struct ssb_bus { + #endif /* DEBUG */ + }; + ++enum ssb_quirks { ++ /* SDIO connected card requires performing a read after writing a 32-bit value */ ++ SSB_QUIRK_SDIO_READ_AFTER_WRITE32 = (1 << 0), ++}; ++ + /* The initialization-invariants. */ + struct ssb_init_invariants { + /* Versioning information about the PCB. */ +@@ -336,12 +392,23 @@ extern int ssb_bus_pcmciabus_register(st + struct pcmcia_device *pcmcia_dev, + unsigned long baseaddr); + #endif /* CONFIG_SSB_PCMCIAHOST */ ++#ifdef CONFIG_SSB_SDIOHOST ++extern int ssb_bus_sdiobus_register(struct ssb_bus *bus, ++ struct sdio_func *sdio_func, ++ unsigned int quirks); ++#endif /* CONFIG_SSB_SDIOHOST */ ++ + + extern void ssb_bus_unregister(struct ssb_bus *bus); + ++/* Does the device have an SPROM? */ ++extern bool ssb_is_sprom_available(struct ssb_bus *bus); ++ + /* Set a fallback SPROM. + * See kdoc at the function definition for complete documentation. */ +-extern int ssb_arch_set_fallback_sprom(const struct ssb_sprom *sprom); ++extern int ssb_arch_register_fallback_sprom( ++ int (*sprom_callback)(struct ssb_bus *bus, ++ struct ssb_sprom *out)); + + /* Suspend a SSB bus. + * Call this from the parent bus suspend routine. */ +@@ -612,6 +679,7 @@ extern int ssb_bus_may_powerdown(struct + * Otherwise static always-on powercontrol will be used. */ + extern int ssb_bus_powerup(struct ssb_bus *bus, bool dynamic_pctl); + ++extern void ssb_commit_settings(struct ssb_bus *bus); + + /* Various helper functions */ + extern u32 ssb_admatch_base(u32 adm); +--- a/include/linux/ssb/ssb_driver_chipcommon.h ++++ b/include/linux/ssb/ssb_driver_chipcommon.h +@@ -53,6 +53,7 @@ + #define SSB_CHIPCO_CAP_64BIT 0x08000000 /* 64-bit Backplane */ + #define SSB_CHIPCO_CAP_PMU 0x10000000 /* PMU available (rev >= 20) */ + #define SSB_CHIPCO_CAP_ECI 0x20000000 /* ECI available (rev >= 20) */ ++#define SSB_CHIPCO_CAP_SPROM 0x40000000 /* SPROM present */ + #define SSB_CHIPCO_CORECTL 0x0008 + #define SSB_CHIPCO_CORECTL_UARTCLK0 0x00000001 /* Drive UART with internal clock */ + #define SSB_CHIPCO_CORECTL_SE 0x00000002 /* sync clk out enable (corerev >= 3) */ +@@ -122,6 +123,8 @@ + #define SSB_CHIPCO_FLASHDATA 0x0048 + #define SSB_CHIPCO_BCAST_ADDR 0x0050 + #define SSB_CHIPCO_BCAST_DATA 0x0054 ++#define SSB_CHIPCO_GPIOPULLUP 0x0058 /* Rev >= 20 only */ ++#define SSB_CHIPCO_GPIOPULLDOWN 0x005C /* Rev >= 20 only */ + #define SSB_CHIPCO_GPIOIN 0x0060 + #define SSB_CHIPCO_GPIOOUT 0x0064 + #define SSB_CHIPCO_GPIOOUTEN 0x0068 +@@ -130,6 +133,9 @@ + #define SSB_CHIPCO_GPIOIRQ 0x0074 + #define SSB_CHIPCO_WATCHDOG 0x0080 + #define SSB_CHIPCO_GPIOTIMER 0x0088 /* LED powersave (corerev >= 16) */ ++#define SSB_CHIPCO_GPIOTIMER_OFFTIME 0x0000FFFF ++#define SSB_CHIPCO_GPIOTIMER_OFFTIME_SHIFT 0 ++#define SSB_CHIPCO_GPIOTIMER_ONTIME 0xFFFF0000 + #define SSB_CHIPCO_GPIOTIMER_ONTIME_SHIFT 16 + #define SSB_CHIPCO_GPIOTOUTM 0x008C /* LED powersave (corerev >= 16) */ + #define SSB_CHIPCO_CLOCK_N 0x0090 +@@ -188,8 +194,10 @@ + #define SSB_CHIPCO_CLKCTLST_HAVEALPREQ 0x00000008 /* ALP available request */ + #define SSB_CHIPCO_CLKCTLST_HAVEHTREQ 0x00000010 /* HT available request */ + #define SSB_CHIPCO_CLKCTLST_HWCROFF 0x00000020 /* Force HW clock request off */ +-#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00010000 /* HT available */ +-#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00020000 /* APL available */ ++#define SSB_CHIPCO_CLKCTLST_HAVEALP 0x00010000 /* ALP available */ ++#define SSB_CHIPCO_CLKCTLST_HAVEHT 0x00020000 /* HT available */ ++#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEHT 0x00010000 /* 4328a0 has reversed bits */ ++#define SSB_CHIPCO_CLKCTLST_4328A0_HAVEALP 0x00020000 /* 4328a0 has reversed bits */ + #define SSB_CHIPCO_HW_WORKAROUND 0x01E4 /* Hardware workaround (rev >= 20) */ + #define SSB_CHIPCO_UART0_DATA 0x0300 + #define SSB_CHIPCO_UART0_IMR 0x0304 +@@ -385,6 +393,7 @@ + + + /** Chip specific Chip-Status register contents. */ ++#define SSB_CHIPCO_CHST_4322_SPROM_EXISTS 0x00000040 /* SPROM present */ + #define SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL 0x00000003 + #define SSB_CHIPCO_CHST_4325_DEFCIS_SEL 0 /* OTP is powered up, use def. CIS, no SPROM */ + #define SSB_CHIPCO_CHST_4325_SPROM_SEL 1 /* OTP is powered up, SPROM is present */ +@@ -398,6 +407,18 @@ + #define SSB_CHIPCO_CHST_4325_RCAL_VALUE_SHIFT 4 + #define SSB_CHIPCO_CHST_4325_PMUTOP_2B 0x00000200 /* 1 for 2b, 0 for to 2a */ + ++/** Macros to determine SPROM presence based on Chip-Status register. */ ++#define SSB_CHIPCO_CHST_4312_SPROM_PRESENT(status) \ ++ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ ++ SSB_CHIPCO_CHST_4325_OTP_SEL) ++#define SSB_CHIPCO_CHST_4322_SPROM_PRESENT(status) \ ++ (status & SSB_CHIPCO_CHST_4322_SPROM_EXISTS) ++#define SSB_CHIPCO_CHST_4325_SPROM_PRESENT(status) \ ++ (((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ ++ SSB_CHIPCO_CHST_4325_DEFCIS_SEL) && \ ++ ((status & SSB_CHIPCO_CHST_4325_SPROM_OTP_SEL) != \ ++ SSB_CHIPCO_CHST_4325_OTP_SEL)) ++ + + + /** Clockcontrol masks and values **/ +@@ -564,6 +585,7 @@ struct ssb_chipcommon_pmu { + struct ssb_chipcommon { + struct ssb_device *dev; + u32 capabilities; ++ u32 status; + /* Fast Powerup Delay constant */ + u16 fast_pwrup_delay; + struct ssb_chipcommon_pmu pmu; +@@ -629,5 +651,15 @@ extern int ssb_chipco_serial_init(struct + /* PMU support */ + extern void ssb_pmu_init(struct ssb_chipcommon *cc); + ++enum ssb_pmu_ldo_volt_id { ++ LDO_PAREF = 0, ++ LDO_VOLT1, ++ LDO_VOLT2, ++ LDO_VOLT3, ++}; ++ ++void ssb_pmu_set_ldo_voltage(struct ssb_chipcommon *cc, ++ enum ssb_pmu_ldo_volt_id id, u32 voltage); ++void ssb_pmu_set_ldo_paref(struct ssb_chipcommon *cc, bool on); + + #endif /* LINUX_SSB_CHIPCO_H_ */ +--- a/include/linux/ssb/ssb_regs.h ++++ b/include/linux/ssb/ssb_regs.h +@@ -85,6 +85,8 @@ + #define SSB_IMSTATE_AP_RSV 0x00000030 /* Reserved */ + #define SSB_IMSTATE_IBE 0x00020000 /* In Band Error */ + #define SSB_IMSTATE_TO 0x00040000 /* Timeout */ ++#define SSB_IMSTATE_BUSY 0x01800000 /* Busy (Backplane rev >= 2.3 only) */ ++#define SSB_IMSTATE_REJECT 0x02000000 /* Reject (Backplane rev >= 2.3 only) */ + #define SSB_INTVEC 0x0F94 /* SB Interrupt Mask */ + #define SSB_INTVEC_PCI 0x00000001 /* Enable interrupts for PCI */ + #define SSB_INTVEC_ENET0 0x00000002 /* Enable interrupts for enet 0 */ +@@ -95,7 +97,7 @@ + #define SSB_INTVEC_ENET1 0x00000040 /* Enable interrupts for enet 1 */ + #define SSB_TMSLOW 0x0F98 /* SB Target State Low */ + #define SSB_TMSLOW_RESET 0x00000001 /* Reset */ +-#define SSB_TMSLOW_REJECT_22 0x00000002 /* Reject (Backplane rev 2.2) */ ++#define SSB_TMSLOW_REJECT 0x00000002 /* Reject (Standard Backplane) */ + #define SSB_TMSLOW_REJECT_23 0x00000004 /* Reject (Backplane rev 2.3) */ + #define SSB_TMSLOW_CLOCK 0x00010000 /* Clock Enable */ + #define SSB_TMSLOW_FGC 0x00020000 /* Force Gated Clocks On */ +@@ -162,7 +164,7 @@ + + /* SPROM shadow area. If not otherwise noted, fields are + * two bytes wide. Note that the SPROM can _only_ be read +- * in two-byte quantinies. ++ * in two-byte quantities. + */ + #define SSB_SPROMSIZE_WORDS 64 + #define SSB_SPROMSIZE_BYTES (SSB_SPROMSIZE_WORDS * sizeof(u16)) +@@ -170,26 +172,27 @@ + #define SSB_SPROMSIZE_WORDS_R4 220 + #define SSB_SPROMSIZE_BYTES_R123 (SSB_SPROMSIZE_WORDS_R123 * sizeof(u16)) + #define SSB_SPROMSIZE_BYTES_R4 (SSB_SPROMSIZE_WORDS_R4 * sizeof(u16)) +-#define SSB_SPROM_BASE 0x1000 +-#define SSB_SPROM_REVISION 0x107E ++#define SSB_SPROM_BASE1 0x1000 ++#define SSB_SPROM_BASE31 0x0800 ++#define SSB_SPROM_REVISION 0x007E + #define SSB_SPROM_REVISION_REV 0x00FF /* SPROM Revision number */ + #define SSB_SPROM_REVISION_CRC 0xFF00 /* SPROM CRC8 value */ + #define SSB_SPROM_REVISION_CRC_SHIFT 8 + + /* SPROM Revision 1 */ +-#define SSB_SPROM1_SPID 0x1004 /* Subsystem Product ID for PCI */ +-#define SSB_SPROM1_SVID 0x1006 /* Subsystem Vendor ID for PCI */ +-#define SSB_SPROM1_PID 0x1008 /* Product ID for PCI */ +-#define SSB_SPROM1_IL0MAC 0x1048 /* 6 bytes MAC address for 802.11b/g */ +-#define SSB_SPROM1_ET0MAC 0x104E /* 6 bytes MAC address for Ethernet */ +-#define SSB_SPROM1_ET1MAC 0x1054 /* 6 bytes MAC address for 802.11a */ +-#define SSB_SPROM1_ETHPHY 0x105A /* Ethernet PHY settings */ ++#define SSB_SPROM1_SPID 0x0004 /* Subsystem Product ID for PCI */ ++#define SSB_SPROM1_SVID 0x0006 /* Subsystem Vendor ID for PCI */ ++#define SSB_SPROM1_PID 0x0008 /* Product ID for PCI */ ++#define SSB_SPROM1_IL0MAC 0x0048 /* 6 bytes MAC address for 802.11b/g */ ++#define SSB_SPROM1_ET0MAC 0x004E /* 6 bytes MAC address for Ethernet */ ++#define SSB_SPROM1_ET1MAC 0x0054 /* 6 bytes MAC address for 802.11a */ ++#define SSB_SPROM1_ETHPHY 0x005A /* Ethernet PHY settings */ + #define SSB_SPROM1_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ + #define SSB_SPROM1_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ + #define SSB_SPROM1_ETHPHY_ET1A_SHIFT 5 + #define SSB_SPROM1_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ + #define SSB_SPROM1_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ +-#define SSB_SPROM1_BINF 0x105C /* Board info */ ++#define SSB_SPROM1_BINF 0x005C /* Board info */ + #define SSB_SPROM1_BINF_BREV 0x00FF /* Board Revision */ + #define SSB_SPROM1_BINF_CCODE 0x0F00 /* Country Code */ + #define SSB_SPROM1_BINF_CCODE_SHIFT 8 +@@ -197,63 +200,63 @@ + #define SSB_SPROM1_BINF_ANTBG_SHIFT 12 + #define SSB_SPROM1_BINF_ANTA 0xC000 /* Available A-PHY antennas */ + #define SSB_SPROM1_BINF_ANTA_SHIFT 14 +-#define SSB_SPROM1_PA0B0 0x105E +-#define SSB_SPROM1_PA0B1 0x1060 +-#define SSB_SPROM1_PA0B2 0x1062 +-#define SSB_SPROM1_GPIOA 0x1064 /* General Purpose IO pins 0 and 1 */ ++#define SSB_SPROM1_PA0B0 0x005E ++#define SSB_SPROM1_PA0B1 0x0060 ++#define SSB_SPROM1_PA0B2 0x0062 ++#define SSB_SPROM1_GPIOA 0x0064 /* General Purpose IO pins 0 and 1 */ + #define SSB_SPROM1_GPIOA_P0 0x00FF /* Pin 0 */ + #define SSB_SPROM1_GPIOA_P1 0xFF00 /* Pin 1 */ + #define SSB_SPROM1_GPIOA_P1_SHIFT 8 +-#define SSB_SPROM1_GPIOB 0x1066 /* General Purpuse IO pins 2 and 3 */ ++#define SSB_SPROM1_GPIOB 0x0066 /* General Purpuse IO pins 2 and 3 */ + #define SSB_SPROM1_GPIOB_P2 0x00FF /* Pin 2 */ + #define SSB_SPROM1_GPIOB_P3 0xFF00 /* Pin 3 */ + #define SSB_SPROM1_GPIOB_P3_SHIFT 8 +-#define SSB_SPROM1_MAXPWR 0x1068 /* Power Amplifier Max Power */ ++#define SSB_SPROM1_MAXPWR 0x0068 /* Power Amplifier Max Power */ + #define SSB_SPROM1_MAXPWR_BG 0x00FF /* B-PHY and G-PHY (in dBm Q5.2) */ + #define SSB_SPROM1_MAXPWR_A 0xFF00 /* A-PHY (in dBm Q5.2) */ + #define SSB_SPROM1_MAXPWR_A_SHIFT 8 +-#define SSB_SPROM1_PA1B0 0x106A +-#define SSB_SPROM1_PA1B1 0x106C +-#define SSB_SPROM1_PA1B2 0x106E +-#define SSB_SPROM1_ITSSI 0x1070 /* Idle TSSI Target */ ++#define SSB_SPROM1_PA1B0 0x006A ++#define SSB_SPROM1_PA1B1 0x006C ++#define SSB_SPROM1_PA1B2 0x006E ++#define SSB_SPROM1_ITSSI 0x0070 /* Idle TSSI Target */ + #define SSB_SPROM1_ITSSI_BG 0x00FF /* B-PHY and G-PHY*/ + #define SSB_SPROM1_ITSSI_A 0xFF00 /* A-PHY */ + #define SSB_SPROM1_ITSSI_A_SHIFT 8 +-#define SSB_SPROM1_BFLLO 0x1072 /* Boardflags (low 16 bits) */ +-#define SSB_SPROM1_AGAIN 0x1074 /* Antenna Gain (in dBm Q5.2) */ ++#define SSB_SPROM1_BFLLO 0x0072 /* Boardflags (low 16 bits) */ ++#define SSB_SPROM1_AGAIN 0x0074 /* Antenna Gain (in dBm Q5.2) */ + #define SSB_SPROM1_AGAIN_BG 0x00FF /* B-PHY and G-PHY */ + #define SSB_SPROM1_AGAIN_BG_SHIFT 0 + #define SSB_SPROM1_AGAIN_A 0xFF00 /* A-PHY */ + #define SSB_SPROM1_AGAIN_A_SHIFT 8 + + /* SPROM Revision 2 (inherits from rev 1) */ +-#define SSB_SPROM2_BFLHI 0x1038 /* Boardflags (high 16 bits) */ +-#define SSB_SPROM2_MAXP_A 0x103A /* A-PHY Max Power */ ++#define SSB_SPROM2_BFLHI 0x0038 /* Boardflags (high 16 bits) */ ++#define SSB_SPROM2_MAXP_A 0x003A /* A-PHY Max Power */ + #define SSB_SPROM2_MAXP_A_HI 0x00FF /* Max Power High */ + #define SSB_SPROM2_MAXP_A_LO 0xFF00 /* Max Power Low */ + #define SSB_SPROM2_MAXP_A_LO_SHIFT 8 +-#define SSB_SPROM2_PA1LOB0 0x103C /* A-PHY PowerAmplifier Low Settings */ +-#define SSB_SPROM2_PA1LOB1 0x103E /* A-PHY PowerAmplifier Low Settings */ +-#define SSB_SPROM2_PA1LOB2 0x1040 /* A-PHY PowerAmplifier Low Settings */ +-#define SSB_SPROM2_PA1HIB0 0x1042 /* A-PHY PowerAmplifier High Settings */ +-#define SSB_SPROM2_PA1HIB1 0x1044 /* A-PHY PowerAmplifier High Settings */ +-#define SSB_SPROM2_PA1HIB2 0x1046 /* A-PHY PowerAmplifier High Settings */ +-#define SSB_SPROM2_OPO 0x1078 /* OFDM Power Offset from CCK Level */ ++#define SSB_SPROM2_PA1LOB0 0x003C /* A-PHY PowerAmplifier Low Settings */ ++#define SSB_SPROM2_PA1LOB1 0x003E /* A-PHY PowerAmplifier Low Settings */ ++#define SSB_SPROM2_PA1LOB2 0x0040 /* A-PHY PowerAmplifier Low Settings */ ++#define SSB_SPROM2_PA1HIB0 0x0042 /* A-PHY PowerAmplifier High Settings */ ++#define SSB_SPROM2_PA1HIB1 0x0044 /* A-PHY PowerAmplifier High Settings */ ++#define SSB_SPROM2_PA1HIB2 0x0046 /* A-PHY PowerAmplifier High Settings */ ++#define SSB_SPROM2_OPO 0x0078 /* OFDM Power Offset from CCK Level */ + #define SSB_SPROM2_OPO_VALUE 0x00FF + #define SSB_SPROM2_OPO_UNUSED 0xFF00 +-#define SSB_SPROM2_CCODE 0x107C /* Two char Country Code */ ++#define SSB_SPROM2_CCODE 0x007C /* Two char Country Code */ + + /* SPROM Revision 3 (inherits most data from rev 2) */ +-#define SSB_SPROM3_IL0MAC 0x104A /* 6 bytes MAC address for 802.11b/g */ +-#define SSB_SPROM3_OFDMAPO 0x102C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */ +-#define SSB_SPROM3_OFDMALPO 0x1030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */ +-#define SSB_SPROM3_OFDMAHPO 0x1034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */ +-#define SSB_SPROM3_GPIOLDC 0x1042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */ ++#define SSB_SPROM3_OFDMAPO 0x002C /* A-PHY OFDM Mid Power Offset (4 bytes, BigEndian) */ ++#define SSB_SPROM3_OFDMALPO 0x0030 /* A-PHY OFDM Low Power Offset (4 bytes, BigEndian) */ ++#define SSB_SPROM3_OFDMAHPO 0x0034 /* A-PHY OFDM High Power Offset (4 bytes, BigEndian) */ ++#define SSB_SPROM3_GPIOLDC 0x0042 /* GPIO LED Powersave Duty Cycle (4 bytes, BigEndian) */ + #define SSB_SPROM3_GPIOLDC_OFF 0x0000FF00 /* Off Count */ + #define SSB_SPROM3_GPIOLDC_OFF_SHIFT 8 + #define SSB_SPROM3_GPIOLDC_ON 0x00FF0000 /* On Count */ + #define SSB_SPROM3_GPIOLDC_ON_SHIFT 16 +-#define SSB_SPROM3_CCKPO 0x1078 /* CCK Power Offset */ ++#define SSB_SPROM3_IL0MAC 0x004A /* 6 bytes MAC address for 802.11b/g */ ++#define SSB_SPROM3_CCKPO 0x0078 /* CCK Power Offset */ + #define SSB_SPROM3_CCKPO_1M 0x000F /* 1M Rate PO */ + #define SSB_SPROM3_CCKPO_2M 0x00F0 /* 2M Rate PO */ + #define SSB_SPROM3_CCKPO_2M_SHIFT 4 +@@ -264,104 +267,200 @@ + #define SSB_SPROM3_OFDMGPO 0x107A /* G-PHY OFDM Power Offset (4 bytes, BigEndian) */ + + /* SPROM Revision 4 */ +-#define SSB_SPROM4_IL0MAC 0x104C /* 6 byte MAC address for a/b/g/n */ +-#define SSB_SPROM4_ETHPHY 0x105A /* Ethernet PHY settings ?? */ ++#define SSB_SPROM4_BFLLO 0x0044 /* Boardflags (low 16 bits) */ ++#define SSB_SPROM4_BFLHI 0x0046 /* Board Flags Hi */ ++#define SSB_SPROM4_BFL2LO 0x0048 /* Board flags 2 (low 16 bits) */ ++#define SSB_SPROM4_BFL2HI 0x004A /* Board flags 2 Hi */ ++#define SSB_SPROM4_IL0MAC 0x004C /* 6 byte MAC address for a/b/g/n */ ++#define SSB_SPROM4_CCODE 0x0052 /* Country Code (2 bytes) */ ++#define SSB_SPROM4_GPIOA 0x0056 /* Gen. Purpose IO # 0 and 1 */ ++#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */ ++#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */ ++#define SSB_SPROM4_GPIOA_P1_SHIFT 8 ++#define SSB_SPROM4_GPIOB 0x0058 /* Gen. Purpose IO # 2 and 3 */ ++#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */ ++#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */ ++#define SSB_SPROM4_GPIOB_P3_SHIFT 8 ++#define SSB_SPROM4_ETHPHY 0x005A /* Ethernet PHY settings ?? */ + #define SSB_SPROM4_ETHPHY_ET0A 0x001F /* MII Address for enet0 */ + #define SSB_SPROM4_ETHPHY_ET1A 0x03E0 /* MII Address for enet1 */ + #define SSB_SPROM4_ETHPHY_ET1A_SHIFT 5 + #define SSB_SPROM4_ETHPHY_ET0M (1<<14) /* MDIO for enet0 */ + #define SSB_SPROM4_ETHPHY_ET1M (1<<15) /* MDIO for enet1 */ +-#define SSB_SPROM4_CCODE 0x1052 /* Country Code (2 bytes) */ +-#define SSB_SPROM4_ANTAVAIL 0x105D /* Antenna available bitfields */ +-#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */ +-#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0 +-#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */ +-#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8 +-#define SSB_SPROM4_BFLLO 0x1044 /* Boardflags (low 16 bits) */ +-#define SSB_SPROM4_AGAIN01 0x105E /* Antenna Gain (in dBm Q5.2) */ ++#define SSB_SPROM4_ANTAVAIL 0x005D /* Antenna available bitfields */ ++#define SSB_SPROM4_ANTAVAIL_A 0x00FF /* A-PHY bitfield */ ++#define SSB_SPROM4_ANTAVAIL_A_SHIFT 0 ++#define SSB_SPROM4_ANTAVAIL_BG 0xFF00 /* B-PHY and G-PHY bitfield */ ++#define SSB_SPROM4_ANTAVAIL_BG_SHIFT 8 ++#define SSB_SPROM4_AGAIN01 0x005E /* Antenna Gain (in dBm Q5.2) */ + #define SSB_SPROM4_AGAIN0 0x00FF /* Antenna 0 */ + #define SSB_SPROM4_AGAIN0_SHIFT 0 + #define SSB_SPROM4_AGAIN1 0xFF00 /* Antenna 1 */ + #define SSB_SPROM4_AGAIN1_SHIFT 8 +-#define SSB_SPROM4_AGAIN23 0x1060 ++#define SSB_SPROM4_AGAIN23 0x0060 + #define SSB_SPROM4_AGAIN2 0x00FF /* Antenna 2 */ + #define SSB_SPROM4_AGAIN2_SHIFT 0 + #define SSB_SPROM4_AGAIN3 0xFF00 /* Antenna 3 */ + #define SSB_SPROM4_AGAIN3_SHIFT 8 +-#define SSB_SPROM4_BFLHI 0x1046 /* Board Flags Hi */ +-#define SSB_SPROM4_MAXP_BG 0x1080 /* Max Power BG in path 1 */ ++#define SSB_SPROM4_TXPID2G01 0x0062 /* TX Power Index 2GHz */ ++#define SSB_SPROM4_TXPID2G0 0x00FF ++#define SSB_SPROM4_TXPID2G0_SHIFT 0 ++#define SSB_SPROM4_TXPID2G1 0xFF00 ++#define SSB_SPROM4_TXPID2G1_SHIFT 8 ++#define SSB_SPROM4_TXPID2G23 0x0064 /* TX Power Index 2GHz */ ++#define SSB_SPROM4_TXPID2G2 0x00FF ++#define SSB_SPROM4_TXPID2G2_SHIFT 0 ++#define SSB_SPROM4_TXPID2G3 0xFF00 ++#define SSB_SPROM4_TXPID2G3_SHIFT 8 ++#define SSB_SPROM4_TXPID5G01 0x0066 /* TX Power Index 5GHz middle subband */ ++#define SSB_SPROM4_TXPID5G0 0x00FF ++#define SSB_SPROM4_TXPID5G0_SHIFT 0 ++#define SSB_SPROM4_TXPID5G1 0xFF00 ++#define SSB_SPROM4_TXPID5G1_SHIFT 8 ++#define SSB_SPROM4_TXPID5G23 0x0068 /* TX Power Index 5GHz middle subband */ ++#define SSB_SPROM4_TXPID5G2 0x00FF ++#define SSB_SPROM4_TXPID5G2_SHIFT 0 ++#define SSB_SPROM4_TXPID5G3 0xFF00 ++#define SSB_SPROM4_TXPID5G3_SHIFT 8 ++#define SSB_SPROM4_TXPID5GL01 0x006A /* TX Power Index 5GHz low subband */ ++#define SSB_SPROM4_TXPID5GL0 0x00FF ++#define SSB_SPROM4_TXPID5GL0_SHIFT 0 ++#define SSB_SPROM4_TXPID5GL1 0xFF00 ++#define SSB_SPROM4_TXPID5GL1_SHIFT 8 ++#define SSB_SPROM4_TXPID5GL23 0x006C /* TX Power Index 5GHz low subband */ ++#define SSB_SPROM4_TXPID5GL2 0x00FF ++#define SSB_SPROM4_TXPID5GL2_SHIFT 0 ++#define SSB_SPROM4_TXPID5GL3 0xFF00 ++#define SSB_SPROM4_TXPID5GL3_SHIFT 8 ++#define SSB_SPROM4_TXPID5GH01 0x006E /* TX Power Index 5GHz high subband */ ++#define SSB_SPROM4_TXPID5GH0 0x00FF ++#define SSB_SPROM4_TXPID5GH0_SHIFT 0 ++#define SSB_SPROM4_TXPID5GH1 0xFF00 ++#define SSB_SPROM4_TXPID5GH1_SHIFT 8 ++#define SSB_SPROM4_TXPID5GH23 0x0070 /* TX Power Index 5GHz high subband */ ++#define SSB_SPROM4_TXPID5GH2 0x00FF ++#define SSB_SPROM4_TXPID5GH2_SHIFT 0 ++#define SSB_SPROM4_TXPID5GH3 0xFF00 ++#define SSB_SPROM4_TXPID5GH3_SHIFT 8 ++#define SSB_SPROM4_MAXP_BG 0x0080 /* Max Power BG in path 1 */ + #define SSB_SPROM4_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */ + #define SSB_SPROM4_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ + #define SSB_SPROM4_ITSSI_BG_SHIFT 8 +-#define SSB_SPROM4_MAXP_A 0x108A /* Max Power A in path 1 */ ++#define SSB_SPROM4_MAXP_A 0x008A /* Max Power A in path 1 */ + #define SSB_SPROM4_MAXP_A_MASK 0x00FF /* Mask for Max Power A */ + #define SSB_SPROM4_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ + #define SSB_SPROM4_ITSSI_A_SHIFT 8 +-#define SSB_SPROM4_GPIOA 0x1056 /* Gen. Purpose IO # 0 and 1 */ +-#define SSB_SPROM4_GPIOA_P0 0x00FF /* Pin 0 */ +-#define SSB_SPROM4_GPIOA_P1 0xFF00 /* Pin 1 */ +-#define SSB_SPROM4_GPIOA_P1_SHIFT 8 +-#define SSB_SPROM4_GPIOB 0x1058 /* Gen. Purpose IO # 2 and 3 */ +-#define SSB_SPROM4_GPIOB_P2 0x00FF /* Pin 2 */ +-#define SSB_SPROM4_GPIOB_P3 0xFF00 /* Pin 3 */ +-#define SSB_SPROM4_GPIOB_P3_SHIFT 8 +-#define SSB_SPROM4_PA0B0 0x1082 /* The paXbY locations are */ +-#define SSB_SPROM4_PA0B1 0x1084 /* only guesses */ +-#define SSB_SPROM4_PA0B2 0x1086 +-#define SSB_SPROM4_PA1B0 0x108E +-#define SSB_SPROM4_PA1B1 0x1090 +-#define SSB_SPROM4_PA1B2 0x1092 ++#define SSB_SPROM4_PA0B0 0x0082 /* The paXbY locations are */ ++#define SSB_SPROM4_PA0B1 0x0084 /* only guesses */ ++#define SSB_SPROM4_PA0B2 0x0086 ++#define SSB_SPROM4_PA1B0 0x008E ++#define SSB_SPROM4_PA1B1 0x0090 ++#define SSB_SPROM4_PA1B2 0x0092 + + /* SPROM Revision 5 (inherits most data from rev 4) */ +-#define SSB_SPROM5_BFLLO 0x104A /* Boardflags (low 16 bits) */ +-#define SSB_SPROM5_BFLHI 0x104C /* Board Flags Hi */ +-#define SSB_SPROM5_IL0MAC 0x1052 /* 6 byte MAC address for a/b/g/n */ +-#define SSB_SPROM5_CCODE 0x1044 /* Country Code (2 bytes) */ +-#define SSB_SPROM5_GPIOA 0x1076 /* Gen. Purpose IO # 0 and 1 */ ++#define SSB_SPROM5_CCODE 0x0044 /* Country Code (2 bytes) */ ++#define SSB_SPROM5_BFLLO 0x004A /* Boardflags (low 16 bits) */ ++#define SSB_SPROM5_BFLHI 0x004C /* Board Flags Hi */ ++#define SSB_SPROM5_BFL2LO 0x004E /* Board flags 2 (low 16 bits) */ ++#define SSB_SPROM5_BFL2HI 0x0050 /* Board flags 2 Hi */ ++#define SSB_SPROM5_IL0MAC 0x0052 /* 6 byte MAC address for a/b/g/n */ ++#define SSB_SPROM5_GPIOA 0x0076 /* Gen. Purpose IO # 0 and 1 */ + #define SSB_SPROM5_GPIOA_P0 0x00FF /* Pin 0 */ + #define SSB_SPROM5_GPIOA_P1 0xFF00 /* Pin 1 */ + #define SSB_SPROM5_GPIOA_P1_SHIFT 8 +-#define SSB_SPROM5_GPIOB 0x1078 /* Gen. Purpose IO # 2 and 3 */ ++#define SSB_SPROM5_GPIOB 0x0078 /* Gen. Purpose IO # 2 and 3 */ + #define SSB_SPROM5_GPIOB_P2 0x00FF /* Pin 2 */ + #define SSB_SPROM5_GPIOB_P3 0xFF00 /* Pin 3 */ + #define SSB_SPROM5_GPIOB_P3_SHIFT 8 + + /* SPROM Revision 8 */ +-#define SSB_SPROM8_BFLLO 0x1084 /* Boardflags (low 16 bits) */ +-#define SSB_SPROM8_BFLHI 0x1086 /* Boardflags Hi */ +-#define SSB_SPROM8_IL0MAC 0x108C /* 6 byte MAC address */ +-#define SSB_SPROM8_CCODE 0x1092 /* 2 byte country code */ +-#define SSB_SPROM8_ANTAVAIL 0x109C /* Antenna available bitfields*/ +-#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ +-#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 +-#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */ +-#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0 +-#define SSB_SPROM8_AGAIN01 0x109E /* Antenna Gain (in dBm Q5.2) */ ++#define SSB_SPROM8_BOARDREV 0x0082 /* Board revision */ ++#define SSB_SPROM8_BFLLO 0x0084 /* Board flags (bits 0-15) */ ++#define SSB_SPROM8_BFLHI 0x0086 /* Board flags (bits 16-31) */ ++#define SSB_SPROM8_BFL2LO 0x0088 /* Board flags (bits 32-47) */ ++#define SSB_SPROM8_BFL2HI 0x008A /* Board flags (bits 48-63) */ ++#define SSB_SPROM8_IL0MAC 0x008C /* 6 byte MAC address */ ++#define SSB_SPROM8_CCODE 0x0092 /* 2 byte country code */ ++#define SSB_SPROM8_GPIOA 0x0096 /*Gen. Purpose IO # 0 and 1 */ ++#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */ ++#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */ ++#define SSB_SPROM8_GPIOA_P1_SHIFT 8 ++#define SSB_SPROM8_GPIOB 0x0098 /* Gen. Purpose IO # 2 and 3 */ ++#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ ++#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ ++#define SSB_SPROM8_GPIOB_P3_SHIFT 8 ++#define SSB_SPROM8_ANTAVAIL 0x009C /* Antenna available bitfields*/ ++#define SSB_SPROM8_ANTAVAIL_A 0xFF00 /* A-PHY bitfield */ ++#define SSB_SPROM8_ANTAVAIL_A_SHIFT 8 ++#define SSB_SPROM8_ANTAVAIL_BG 0x00FF /* B-PHY and G-PHY bitfield */ ++#define SSB_SPROM8_ANTAVAIL_BG_SHIFT 0 ++#define SSB_SPROM8_AGAIN01 0x009E /* Antenna Gain (in dBm Q5.2) */ + #define SSB_SPROM8_AGAIN0 0x00FF /* Antenna 0 */ + #define SSB_SPROM8_AGAIN0_SHIFT 0 + #define SSB_SPROM8_AGAIN1 0xFF00 /* Antenna 1 */ + #define SSB_SPROM8_AGAIN1_SHIFT 8 +-#define SSB_SPROM8_AGAIN23 0x10A0 ++#define SSB_SPROM8_AGAIN23 0x00A0 + #define SSB_SPROM8_AGAIN2 0x00FF /* Antenna 2 */ + #define SSB_SPROM8_AGAIN2_SHIFT 0 + #define SSB_SPROM8_AGAIN3 0xFF00 /* Antenna 3 */ + #define SSB_SPROM8_AGAIN3_SHIFT 8 +-#define SSB_SPROM8_GPIOA 0x1096 /*Gen. Purpose IO # 0 and 1 */ +-#define SSB_SPROM8_GPIOA_P0 0x00FF /* Pin 0 */ +-#define SSB_SPROM8_GPIOA_P1 0xFF00 /* Pin 1 */ +-#define SSB_SPROM8_GPIOA_P1_SHIFT 8 +-#define SSB_SPROM8_GPIOB 0x1098 /* Gen. Purpose IO # 2 and 3 */ +-#define SSB_SPROM8_GPIOB_P2 0x00FF /* Pin 2 */ +-#define SSB_SPROM8_GPIOB_P3 0xFF00 /* Pin 3 */ +-#define SSB_SPROM8_GPIOB_P3_SHIFT 8 +-#define SSB_SPROM8_MAXP_BG 0x10C0 /* Max Power BG in path 1 */ +-#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power BG */ ++#define SSB_SPROM8_RSSIPARM2G 0x00A4 /* RSSI params for 2GHz */ ++#define SSB_SPROM8_RSSISMF2G 0x000F ++#define SSB_SPROM8_RSSISMC2G 0x00F0 ++#define SSB_SPROM8_RSSISMC2G_SHIFT 4 ++#define SSB_SPROM8_RSSISAV2G 0x0700 ++#define SSB_SPROM8_RSSISAV2G_SHIFT 8 ++#define SSB_SPROM8_BXA2G 0x1800 ++#define SSB_SPROM8_BXA2G_SHIFT 11 ++#define SSB_SPROM8_RSSIPARM5G 0x00A6 /* RSSI params for 5GHz */ ++#define SSB_SPROM8_RSSISMF5G 0x000F ++#define SSB_SPROM8_RSSISMC5G 0x00F0 ++#define SSB_SPROM8_RSSISMC5G_SHIFT 4 ++#define SSB_SPROM8_RSSISAV5G 0x0700 ++#define SSB_SPROM8_RSSISAV5G_SHIFT 8 ++#define SSB_SPROM8_BXA5G 0x1800 ++#define SSB_SPROM8_BXA5G_SHIFT 11 ++#define SSB_SPROM8_TRI25G 0x00A8 /* TX isolation 2.4&5.3GHz */ ++#define SSB_SPROM8_TRI2G 0x00FF /* TX isolation 2.4GHz */ ++#define SSB_SPROM8_TRI5G 0xFF00 /* TX isolation 5.3GHz */ ++#define SSB_SPROM8_TRI5G_SHIFT 8 ++#define SSB_SPROM8_TRI5GHL 0x00AA /* TX isolation 5.2/5.8GHz */ ++#define SSB_SPROM8_TRI5GL 0x00FF /* TX isolation 5.2GHz */ ++#define SSB_SPROM8_TRI5GH 0xFF00 /* TX isolation 5.8GHz */ ++#define SSB_SPROM8_TRI5GH_SHIFT 8 ++#define SSB_SPROM8_RXPO 0x00AC /* RX power offsets */ ++#define SSB_SPROM8_RXPO2G 0x00FF /* 2GHz RX power offset */ ++#define SSB_SPROM8_RXPO5G 0xFF00 /* 5GHz RX power offset */ ++#define SSB_SPROM8_RXPO5G_SHIFT 8 ++#define SSB_SPROM8_MAXP_BG 0x00C0 /* Max Power 2GHz in path 1 */ ++#define SSB_SPROM8_MAXP_BG_MASK 0x00FF /* Mask for Max Power 2GHz */ + #define SSB_SPROM8_ITSSI_BG 0xFF00 /* Mask for path 1 itssi_bg */ + #define SSB_SPROM8_ITSSI_BG_SHIFT 8 +-#define SSB_SPROM8_MAXP_A 0x10C8 /* Max Power A in path 1 */ +-#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power A */ ++#define SSB_SPROM8_PA0B0 0x00C2 /* 2GHz power amp settings */ ++#define SSB_SPROM8_PA0B1 0x00C4 ++#define SSB_SPROM8_PA0B2 0x00C6 ++#define SSB_SPROM8_MAXP_A 0x00C8 /* Max Power 5.3GHz */ ++#define SSB_SPROM8_MAXP_A_MASK 0x00FF /* Mask for Max Power 5.3GHz */ + #define SSB_SPROM8_ITSSI_A 0xFF00 /* Mask for path 1 itssi_a */ + #define SSB_SPROM8_ITSSI_A_SHIFT 8 ++#define SSB_SPROM8_MAXP_AHL 0x00CA /* Max Power 5.2/5.8GHz */ ++#define SSB_SPROM8_MAXP_AH_MASK 0x00FF /* Mask for Max Power 5.8GHz */ ++#define SSB_SPROM8_MAXP_AL_MASK 0xFF00 /* Mask for Max Power 5.2GHz */ ++#define SSB_SPROM8_MAXP_AL_SHIFT 8 ++#define SSB_SPROM8_PA1B0 0x00CC /* 5.3GHz power amp settings */ ++#define SSB_SPROM8_PA1B1 0x00CE ++#define SSB_SPROM8_PA1B2 0x00D0 ++#define SSB_SPROM8_PA1LOB0 0x00D2 /* 5.2GHz power amp settings */ ++#define SSB_SPROM8_PA1LOB1 0x00D4 ++#define SSB_SPROM8_PA1LOB2 0x00D6 ++#define SSB_SPROM8_PA1HIB0 0x00D8 /* 5.8GHz power amp settings */ ++#define SSB_SPROM8_PA1HIB1 0x00DA ++#define SSB_SPROM8_PA1HIB2 0x00DC ++#define SSB_SPROM8_CCK2GPO 0x0140 /* CCK power offset */ ++#define SSB_SPROM8_OFDM2GPO 0x0142 /* 2.4GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GPO 0x0146 /* 5.3GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GLPO 0x014A /* 5.2GHz OFDM power offset */ ++#define SSB_SPROM8_OFDM5GHPO 0x014E /* 5.8GHz OFDM power offset */ + + /* Values for SSB_SPROM1_BINF_CCODE */ + enum {