X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/d3f52dab1d54c25da2dffd8862bcdb67deff2ca7..097b27145d8b0e148636abd74ff80b8b92e25c05:/package/comgt/files/3g.sh?ds=sidebyside

diff --git a/package/comgt/files/3g.sh b/package/comgt/files/3g.sh
index 5274821a1..b27e90e50 100644
--- a/package/comgt/files/3g.sh
+++ b/package/comgt/files/3g.sh
@@ -13,7 +13,7 @@ scan_3g() {
 
 	# try to figure out the device if it's invalid
 	[ -n "$device" -a -e "$device" ] || {
-		for device in /dev/ttyUSB2 /dev/tts/2 /dev/usb/tts/0 /dev/noz0; do
+		for device in /dev/ttyUSB0 /dev/ttyUSB1 /dev/ttyUSB2 /dev/tts/2 /dev/usb/tts/0 /dev/noz0; do
 			[ -e "$device" ] && {
 				config_set "$1" device "$device"
 				break
@@ -36,45 +36,61 @@ stop_interface_3g() {
 setup_interface_3g() {
 	local iface="$1"
 	local config="$2"
+	local chat="/etc/chatscripts/3g.chat"
 	
 	config_get device "$config" device
+	config_get maxwait "$config" maxwait
+	maxwait=${maxwait:-20}
+	while [ ! -e "$device" -a $maxwait -gt 0 ];do # wait for driver loading to catch up
+		maxwait=$(($maxwait - 1))
+		sleep 1
+	done
 
 	for module in slhc ppp_generic ppp_async; do
 		/sbin/insmod $module 2>&- >&-
 	done
 
-	config_get apn "$cfg" apn
-	config_get service "$cfg" service
-	config_get pincode "$cfg" pincode
-	config_get mtu "$cfg" mtu
+	config_get apn "$config" apn
+	config_get service "$config" service
+	config_get pincode "$config" pincode
+	config_get mtu "$config" mtu
 
 	set_3g_led 1 0 1
 
 	# figure out hardware specific commands for the card
-	if gcom -d "$device" -s /etc/gcom/getcardinfo.gcom | grep Novatel 2>/dev/null >/dev/null; then
-		case "$service" in
-			umts_only) CODE=2;;
-			gprs_only) CODE=1;;
-			*) CODE=0;;
-		esac
-		mode="AT\$NWRAT=${CODE},2"
-	else
-		case "$service" in
-			umts_only) CODE=1;;
-			gprs_only) CODE=0;;
-			*) CODE=3;;
-		esac
-		mode="AT_OPSYS=${CODE}"
-	fi
-	
-	PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
-		echo "$cfg(3g): Failed to set the PIN code."
-		set_3g_led 0 0 0
-		return 1
-	}
-	MODE="$mode" gcom -d "$device" -s /etc/gcom/setmode.gcom
+	case "$service" in
+		cdma|evdo) chat="/etc/chatscripts/evdo.chat";;
+	*)
+		cardinfo=$(gcom -d "$device" -s /etc/gcom/getcardinfo.gcom)
+		if echo "$cardinfo" | grep Novatel; then
+			case "$service" in
+				umts_only) CODE=2;;
+				gprs_only) CODE=1;;
+				*) CODE=0;;
+			esac
+			mode="AT\$NWRAT=${CODE},2"
+		elif echo "$cardinfo" | grep Option; then
+			case "$service" in
+				umts_only) CODE=1;;
+				gprs_only) CODE=0;;
+				*) CODE=3;;
+			esac
+			mode="AT_OPSYS=${CODE}"
+		fi
+		# Don't assume Option to be default as it breaks with Huawei Cards/Sticks
+		
+		PINCODE="$pincode" gcom -d "$device" -s /etc/gcom/setpin.gcom || {
+			echo "$config(3g): Failed to set the PIN code."
+			set_3g_led 0 0 0
+			return 1
+		}
+		test -z "$mode" || {
+			MODE="$mode" gcom -d "$device" -s /etc/gcom/setmode.gcom
+		}
+	esac
 	set_3g_led 1 0 0
 
+	config_set "$config" "connect" "${apn:+USE_APN=$apn }/usr/sbin/chat -t5 -v -E -f $chat"
 	start_pppd "$config" \
 		noaccomp \
 		nopcomp \
@@ -83,7 +99,6 @@ setup_interface_3g() {
 		noauth \
 		lock \
 		crtscts \
-		connect "USE_APN=\"$apn\" /etc/ppp/3g.connect" \
 		${mtu:+mtu $mtu mru $mtu} \
-		460800 "$device"
+		115200 "$device"
 }