X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/d63beb8f0c1e496ebc2a9c568d13233acdafa82f..5e3ed67a782b5ae7600108ce0568020a807f873a:/target/linux/adm5120/files/drivers/net/adm5120sw.c

diff --git a/target/linux/adm5120/files/drivers/net/adm5120sw.c b/target/linux/adm5120/files/drivers/net/adm5120sw.c
index 8f3610e90..09cb9097e 100644
--- a/target/linux/adm5120/files/drivers/net/adm5120sw.c
+++ b/target/linux/adm5120/files/drivers/net/adm5120sw.c
@@ -1,7 +1,7 @@
 /*
  *  ADM5120 built-in ethernet switch driver
  *
- *  Copyright (C) 2007,2008 Gabor Juhos <juhosg at openwrt.org>
+ *  Copyright (C) 2007-2008 Gabor Juhos <juhosg@openwrt.org>
  *
  *  This code was based on a driver for Linux 2.6.xx by Jeroen Vreeken.
  *    Copyright Jeroen Vreeken (pe1rxq@amsat.org), 2005
@@ -24,20 +24,18 @@
 #include <linux/ioport.h>
 #include <linux/spinlock.h>
 #include <linux/platform_device.h>
+#include <linux/io.h>
+#include <linux/irq.h>
 
 #include <linux/netdevice.h>
 #include <linux/etherdevice.h>
 #include <linux/skbuff.h>
 
-#include <linux/io.h>
-#include <linux/irq.h>
-
 #include <asm/mipsregs.h>
 
-#include <adm5120_info.h>
-#include <adm5120_defs.h>
-#include <adm5120_irq.h>
-#include <adm5120_switch.h>
+#include <asm/mach-adm5120/adm5120_info.h>
+#include <asm/mach-adm5120/adm5120_defs.h>
+#include <asm/mach-adm5120/adm5120_switch.h>
 
 #include "adm5120sw.h"
 
@@ -519,7 +517,7 @@ static int adm5120_if_poll(struct napi_struct *napi, int limit)
 	status = sw_int_status() & SWITCH_INTS_POLL;
 	if ((done < limit) && (!status)) {
 		SW_DBG("disable polling mode for %s\n", dev->name);
-		netif_rx_complete(dev, napi);
+		napi_complete(napi);
 		sw_int_unmask(SWITCH_INTS_POLL);
 		return 0;
 	}
@@ -550,7 +548,7 @@ static irqreturn_t adm5120_switch_irq(int irq, void *dev_id)
 		sw_dump_intr_mask("poll ints", status);
 		SW_DBG("enable polling mode for %s\n", dev->name);
 		sw_int_mask(SWITCH_INTS_POLL);
-		netif_rx_schedule(dev, &priv->napi);
+		napi_schedule(&priv->napi);
 	}
 #else
 	sw_int_ack(status);
@@ -810,8 +808,8 @@ static int adm5120_if_open(struct net_device *dev)
 
 	adm5120_if_napi_enable(dev);
 
-	err = request_irq(dev->irq, adm5120_switch_irq,
-		(IRQF_SHARED | IRQF_DISABLED), dev->name, dev);
+	err = request_irq(dev->irq, adm5120_switch_irq, IRQF_SHARED,
+			  dev->name, dev);
 	if (err) {
 		SW_ERR("unable to get irq for %s\n", dev->name);
 		goto err;
@@ -975,9 +973,12 @@ static void adm5120_if_set_multicast_list(struct net_device *dev)
 
 static int adm5120_if_set_mac_address(struct net_device *dev, void *p)
 {
-	struct sockaddr *addr = p;
+	int ret;
+
+	ret = eth_mac_addr(dev, p);
+	if (ret)
+		return ret;
 
-	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
 	adm5120_write_mac(dev);
 	return 0;
 }
@@ -1019,6 +1020,18 @@ static int adm5120_if_do_ioctl(struct net_device *dev, struct ifreq *rq,
 	return 0;
 }
 
+static const struct net_device_ops adm5120sw_netdev_ops = {
+        .ndo_open               = adm5120_if_open,
+        .ndo_stop               = adm5120_if_stop,
+        .ndo_start_xmit         = adm5120_if_hard_start_xmit,
+        .ndo_set_multicast_list = adm5120_if_set_multicast_list,
+        .ndo_do_ioctl           = adm5120_if_do_ioctl,
+        .ndo_tx_timeout         = adm5120_if_tx_timeout,
+        .ndo_validate_addr      = eth_validate_addr,
+        .ndo_change_mtu         = eth_change_mtu,
+	.ndo_set_mac_address    = adm5120_if_set_mac_address,
+};
+
 static struct net_device *adm5120_if_alloc(void)
 {
 	struct net_device *dev;
@@ -1032,14 +1045,8 @@ static struct net_device *adm5120_if_alloc(void)
 	priv->dev = dev;
 
 	dev->irq		= ADM5120_IRQ_SWITCH;
-	dev->open		= adm5120_if_open;
-	dev->hard_start_xmit 	= adm5120_if_hard_start_xmit;
-	dev->stop		= adm5120_if_stop;
-	dev->set_multicast_list	= adm5120_if_set_multicast_list;
-	dev->do_ioctl		= adm5120_if_do_ioctl;
-	dev->tx_timeout		= adm5120_if_tx_timeout;
+	dev->netdev_ops		= &adm5120sw_netdev_ops;
 	dev->watchdog_timeo 	= TX_TIMEOUT;
-	dev->set_mac_address 	= adm5120_if_set_mac_address;
 
 #ifdef CONFIG_ADM5120_SWITCH_NAPI
 	netif_napi_add(dev, &priv->napi, adm5120_if_poll, 64);
@@ -1200,6 +1207,6 @@ module_init(adm5120_switch_mod_init);
 module_exit(adm5120_switch_mod_exit);
 
 MODULE_LICENSE("GPL v2");
-MODULE_AUTHOR("Gabor Juhos <juhosg at openwrt.org>");
+MODULE_AUTHOR("Gabor Juhos <juhosg@openwrt.org>");
 MODULE_DESCRIPTION(DRV_DESC);
 MODULE_VERSION(DRV_VERSION);