X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/dbaa421297b3576dbaf121faa13894139e3a39ec..f6ceb966a6d45934fb5ebf157f4e4f30652ea8ca:/package/mac80211/files/lib/wifi/mac80211.sh?ds=sidebyside

diff --git a/package/mac80211/files/lib/wifi/mac80211.sh b/package/mac80211/files/lib/wifi/mac80211.sh
index 2721e4d7c..b20785cf6 100644
--- a/package/mac80211/files/lib/wifi/mac80211.sh
+++ b/package/mac80211/files/lib/wifi/mac80211.sh
@@ -1,16 +1,162 @@
 #!/bin/sh
 append DRIVERS "mac80211"
 
+mac80211_hostapd_setup_base() {
+	local phy="$1"
+	local ifname="$2"
+
+	cfgfile="/var/run/hostapd-$phy.conf"
+	config_get device "$vif" device
+	config_get country "$device" country
+	config_get hwmode "$device" hwmode
+	config_get channel "$device" channel
+	config_get_bool noscan "$device" noscan
+	[ -n "$channel" -a -z "$hwmode" ] && wifi_fixup_hwmode "$device"
+	[ "$channel" = auto ] && channel=
+	[ -n "$hwmode" ] && {
+		config_get hwmode_11n "$device" hwmode_11n
+		[ -n "$hwmode_11n" ] && {
+			hwmode="$hwmode_11n"
+			append base_cfg "ieee80211n=1" "$N"
+			config_get htmode "$device" htmode
+			config_get ht_capab_list "$device" ht_capab
+			case "$htmode" in
+				HT20|HT40+|HT40-) ht_capab="[$htmode]";;
+				*)ht_capab=;;
+			esac
+			for cap in $ht_capab_list; do
+				ht_capab="$ht_capab[$cap]"
+			done
+			[ -n "$ht_capab" ] && append base_cfg "ht_capab=$ht_capab" "$N"
+		}
+	}
+	cat > "$cfgfile" <<EOF
+ctrl_interface=/var/run/hostapd-$phy
+driver=nl80211
+wmm_ac_bk_cwmin=4
+wmm_ac_bk_cwmax=10
+wmm_ac_bk_aifs=7
+wmm_ac_bk_txop_limit=0
+wmm_ac_bk_acm=0
+wmm_ac_be_aifs=3
+wmm_ac_be_cwmin=4
+wmm_ac_be_cwmax=10
+wmm_ac_be_txop_limit=0
+wmm_ac_be_acm=0
+wmm_ac_vi_aifs=2
+wmm_ac_vi_cwmin=3
+wmm_ac_vi_cwmax=4
+wmm_ac_vi_txop_limit=94
+wmm_ac_vi_acm=0
+wmm_ac_vo_aifs=2
+wmm_ac_vo_cwmin=2
+wmm_ac_vo_cwmax=3
+wmm_ac_vo_txop_limit=47
+wmm_ac_vo_acm=0
+tx_queue_data3_aifs=7
+tx_queue_data3_cwmin=15
+tx_queue_data3_cwmax=1023
+tx_queue_data3_burst=0
+tx_queue_data2_aifs=3
+tx_queue_data2_cwmin=15
+tx_queue_data2_cwmax=63
+tx_queue_data2_burst=0
+tx_queue_data1_aifs=1
+tx_queue_data1_cwmin=7
+tx_queue_data1_cwmax=15
+tx_queue_data1_burst=3.0
+tx_queue_data0_aifs=1
+tx_queue_data0_cwmin=3
+tx_queue_data0_cwmax=7
+tx_queue_data0_burst=1.5
+${hwmode:+hw_mode=$hwmode}
+${channel:+channel=$channel}
+${country:+country_code=$country}
+${noscan:+noscan=$noscan}
+$base_cfg
+
+EOF
+}
+
+mac80211_hostapd_setup_bss() {
+	local phy="$1"
+	local vif="$2"
+
+	hostapd_cfg=
+	cfgfile="/var/run/hostapd-$phy.conf"
+	config_get ifname "$vif" ifname
+
+	if [ -f "$cfgfile" ]; then
+		append hostapd_cfg "bss=$ifname" "$N"
+	else
+		mac80211_hostapd_setup_base "$phy" "$ifname"
+		append hostapd_cfg "interface=$ifname" "$N"
+	fi
+
+	local net_cfg bridge
+	net_cfg="$(find_net_config "$vif")"
+	[ -z "$net_cfg" ] || bridge="$(bridge_interface "$net_cfg")"
+	config_set "$vif" bridge "$bridge"
+
+	hostapd_set_bss_options hostapd_cfg "$vif"
+
+	config_get_bool wds "$vif" wds 0
+	[ "$wds" -gt 0 ] && append hostapd_cfg "wds_sta=1" "$N"
+
+	local macaddr hidden maxassoc wmm
+	config_get macaddr "$vif" macaddr
+	config_get maxassoc "$vif" maxassoc
+	config_get_bool hidden "$vif" hidden 0
+	config_get_bool wmm "$vif" wmm 1
+	cat >> /var/run/hostapd-$phy.conf <<EOF
+$hostapd_cfg
+wmm_enabled=$wmm
+bssid=$macaddr
+ignore_broadcast_ssid=$hidden
+${maxassoc:+max_num_sta=$maxassoc}
+EOF
+}
+
+mac80211_start_vif() {
+	local vif="$1"
+	local ifname="$2"
+
+	local net_cfg
+	net_cfg="$(find_net_config "$vif")"
+	[ -z "$net_cfg" ] || start_net "$ifname" "$net_cfg"
+
+	set_wifi_up "$vif" "$ifname"
+}
+
+find_mac80211_phy() {
+	local device="$1"
+
+	local macaddr="$(config_get "$device" macaddr | tr 'A-Z' 'a-z')"
+	config_get phy "$device" phy
+	[ -z "$phy" -a -n "$macaddr" ] && {
+		for phy in $(ls /sys/class/ieee80211 2>/dev/null); do
+			[ "$macaddr" = "$(cat /sys/class/ieee80211/${phy}/macaddress)" ] || continue
+			config_set "$device" phy "$phy"
+			break
+		done
+		config_get phy "$device" phy
+	}
+	[ -n "$phy" -a -d "/sys/class/ieee80211/$phy" ] || {
+		echo "PHY for wifi device $1 not found"
+		return 1
+	}
+	[ -z "$macaddr" ] && {
+		config_set "$device" macaddr "$(cat /sys/class/ieee80211/${phy}/macaddress)"
+	}
+	return 0
+}
+
 scan_mac80211() {
 	local device="$1"
-	local adhoc sta ap
+	local adhoc sta ap monitor mesh
 
 	config_get vifs "$device" vifs
 	for vif in $vifs; do
-
-		config_get ifname "$vif" ifname
-		config_set "$vif" ifname "${ifname:-$device}"
-
 		config_get mode "$vif" mode
 		case "$mode" in
 			adhoc|sta|ap|monitor|mesh)
@@ -20,189 +166,298 @@ scan_mac80211() {
 		esac
 	done
 
-	config_set "$device" vifs "${ap:+$ap }${adhoc:+$adhoc }${ahdemo:+$ahdemo }${sta:+$sta }${wds:+$wds }${monitor:+$monitor }${mesh:+$mesh}"
+	config_set "$device" vifs "${ap:+$ap }${adhoc:+$adhoc }${sta:+$sta }${monitor:+$monitor }${mesh:+$mesh}"
 }
 
+list_phy_interfaces() {
+	local phy="$1"
+	if [ -d "/sys/class/ieee80211/${phy}/device/net" ]; then
+		ls "/sys/class/ieee80211/${phy}/device/net" 2>/dev/null;
+	else
+		ls "/sys/class/ieee80211/${phy}/device" 2>/dev/null | grep net: | sed -e 's,net:,,g'
+	fi
+}
 
 disable_mac80211() (
 	local device="$1"
 
+	find_mac80211_phy "$device" || return 0
+	config_get phy "$device" phy
+
 	set_wifi_down "$device"
 	# kill all running hostapd and wpa_supplicant processes that
 	# are running on atheros/mac80211 vifs
-	for pid in `pidof hostapd wpa_supplicant`; do
-		grep wlan /proc/$pid/cmdline >/dev/null && \
+	for pid in `pidof hostapd`; do
+		grep -E "$phy" /proc/$pid/cmdline >/dev/null && \
 			kill $pid
 	done
 
 	include /lib/network
-	cd /proc/sys/net
-	for dev in *; do
-		grep "$device" "$dev/%parent" >/dev/null 2>/dev/null && {
-			ifconfig "$dev" down
-			unbridge "$dev"
-		}
+	for wdev in $(list_phy_interfaces "$phy"); do
+		[ -f "/var/run/$wdev.pid" ] && kill $(cat /var/run/$wdev.pid) >&/dev/null 2>&1
+		for pid in `pidof wpa_supplicant`; do
+			grep "$wdev" /proc/$pid/cmdline >/dev/null && \
+				kill $pid
+		done
+		ifconfig "$wdev" down 2>/dev/null
+		unbridge "$dev"
+		iw dev "$wdev" del
 	done
+
 	return 0
 )
-
+get_freq() {
+	local phy="$1"
+	local chan="$2"
+	iw "$phy" info | grep -E -m1 "(\* ${chan:-....} MHz${chan:+|\\[$chan\\]})" | grep MHz | awk '{print $2}'
+}
 enable_mac80211() {
 	local device="$1"
 	config_get channel "$device" channel
 	config_get vifs "$device" vifs
 	config_get txpower "$device" txpower
+	config_get country "$device" country
+	config_get distance "$device" distance
+	config_get frag "$device" frag
+	config_get rts "$device" rts
+	find_mac80211_phy "$device" || return 0
+	config_get phy "$device" phy
+	local i=0
+	local macidx=0
+	local apidx=0
+	fixed=""
+	local hostapd_ctrl=""
+
+	[ -n "$country" ] && iw reg set "$country"
+	[ "$channel" = "auto" -o "$channel" = "0" ] || {
+		fixed=1
+	}
+
+	[ -n "$distance" ] && iw phy "$phy" set distance "$distance"
+	[ -n "$frag" ] && iw phy "$phy" set frag "${frag%%.*}"
+	[ -n "$rts" ] && iw phy "$phy" set rts "${rts%%.*}"
+
+	export channel fixed
+	# convert channel to frequency
+	local freq="$(get_freq "$phy" "${fixed:+$channel}")"
 
-	local first=1
-	local mesh_idx=0
 	wifi_fixup_hwmode "$device" "g"
 	for vif in $vifs; do
-		ifconfig "$ifname" down 2>/dev/null
-		config_get ifname "$vif" ifname
-		config_get enc "$vif" encryption
-		config_get eap_type "$vif" eap_type
-		config_get mode "$vif" mode
+		while [ -d "/sys/class/net/wlan$i" ]; do
+			i=$(($i + 1))
+		done
 
 		config_get ifname "$vif" ifname
-		[ $? -ne 0 ] && {
-			echo "enable_mac80211($device): Failed to set up $mode vif $ifname" >&2
-			continue
+		[ -n "$ifname" ] || {
+			ifname="wlan$i"
 		}
 		config_set "$vif" ifname "$ifname"
 
-		[ "$first" = 1 ] && {
-			# only need to change freq band and channel on the first vif
-			iwconfig "$ifname" channel "$channel" >/dev/null 2>/dev/null
-			if [ "$mode" = adhoc ]; then
-				iwlist "$ifname" scan >/dev/null 2>/dev/null
-				sleep 1
-				iwconfig "$ifname" mode ad-hoc >/dev/null 2>/dev/null
-			fi
-			# mesh interface should be created only for the first interface
-			if [ "$mode" = mesh ]; then
-				config_get mesh_id "$vif" mesh_id
-				if [ -n "$mesh_id" ]; then
-					iw dev "$ifname" interface add msh$mesh_idx type mp mesh_id $mesh_id
-				fi
-			fi
-			sleep 1
-			iwconfig "$ifname" channel "$channel" >/dev/null 2>/dev/null
-		}
-		if [ "$mode" = sta ]; then
-			iwconfig "$ifname" mode managed >/dev/null 2>/dev/null
-		else
-			iwconfig "$ifname" mode $mode >/dev/null 2>/dev/null
-		fi
-
-		wpa=
-		case "$enc" in
-			WEP|wep)
-				for idx in 1 2 3 4; do
-					config_get key "$vif" "key${idx}"
-					iwconfig "$ifname" enc "[$idx]" "${key:-off}"
-				done
-				config_get key "$vif" key
-				key="${key:-1}"
-				case "$key" in
-					[1234]) iwconfig "$ifname" enc "[$key]";;
-					*) iwconfig "$ifname" enc "$key";;
-				esac
-			;;
-			PSK|psk|PSK2|psk2)
-				config_get key "$vif" key
-			;;
-		esac
+		config_get mode "$vif" mode
+		config_get ssid "$vif" ssid
 
+		# It is far easier to delete and create the desired interface
 		case "$mode" in
 			adhoc)
-				config_get addr "$vif" bssid
-				[ -z "$addr" ] || {
-					iwconfig "$ifname" ap "$addr"
-				}
+				iw phy "$phy" interface add "$ifname" type adhoc
+			;;
+			ap)
+				# Hostapd will handle recreating the interface and
+				# it's accompanying monitor
+				apidx="$(($apidx + 1))"
+				i=$(($i + 1))
+				[ "$apidx" -gt 1 ] || iw phy "$phy" interface add "$ifname" type managed
+			;;
+			mesh)
+				config_get mesh_id "$vif" mesh_id
+				iw phy "$phy" interface add "$ifname" type mp mesh_id "$mesh_id"
+			;;
+			monitor)
+				iw phy "$phy" interface add "$ifname" type monitor
+			;;
+			sta)
+				local wdsflag
+				config_get_bool wds "$vif" wds 0
+				[ "$wds" -gt 0 ] && wdsflag="4addr on"
+				iw phy "$phy" interface add "$ifname" type managed $wdsflag
+				config_get_bool powersave "$vif" powersave 0
+				[ "$powersave" -gt 0 ] && powersave="on" || powersave="off"
+				iwconfig "$ifname" power "$powersave"
 			;;
 		esac
-		config_get ssid "$vif" ssid
+
+		# All interfaces must have unique mac addresses
+		# which can either be explicitly set in the device
+		# section, or automatically generated
+		config_get macaddr "$device" macaddr
+		local mac_1="${macaddr%%:*}"
+		local mac_2="${macaddr#*:}"
+
+		config_get vif_mac "$vif" macaddr
+		[ -n "$vif_mac" ] || {
+			if [ "$macidx" -gt 0 ]; then
+				offset="$(( 2 + $macidx * 4 ))"
+			else
+				offset="0"
+			fi
+			vif_mac="$( printf %02x $((0x$mac_1 + $offset)) ):$mac_2"
+			macidx="$(($macidx + 1))"
+		}
+		[ "$mode" = "ap" ] || ifconfig "$ifname" hw ether "$vif_mac"
+		config_set "$vif" macaddr "$vif_mac"
+
+		# !! ap !!
+		#
+		# ALL ap functionality will be passed to hostapd
+		#
+		# !! station !!
+		#
+		# ALL station functionality will be passed to wpa_supplicant
+		#
+		if [ ! "$mode" = "ap" ]; then
+			# We attempt to set the channel for all interfaces, although
+			# mac80211 may not support it or the driver might not yet
+			# for ap mode this is handled by hostapd
+			[ -n "$fixed" -a -n "$channel" ] && iw dev "$ifname" set channel "$channel"
+		fi
 
 		config_get vif_txpower "$vif" txpower
 		# use vif_txpower (from wifi-iface) to override txpower (from
 		# wifi-device) if the latter doesn't exist
 		txpower="${txpower:-$vif_txpower}"
-		[ -z "$txpower" ] || iwconfig "$ifname" txpower "${txpower%%.*}"
+		[ -z "$txpower" ] || iw dev "$ifname" set txpower fixed "${txpower%%.*}00"
+	done
 
-		config_get frag "$vif" frag
-		if [ -n "$frag" ]; then
-			iwconfig "$ifname" frag "${frag%%.*}"
-		fi
+	local start_hostapd=
+	rm -f /var/run/hostapd-$phy.conf
+	for vif in $vifs; do
+		config_get mode "$vif" mode
+		[ "$mode" = "ap" ] || continue
+		mac80211_hostapd_setup_bss "$phy" "$vif"
+		start_hostapd=1
+	done
 
-		config_get rts "$vif" rts
-		if [ -n "$rts" ]; then
-			iwconfig "$ifname" rts "${rts%%.*}"
-		fi
+	[ -n "$start_hostapd" ] && {
+		hostapd -P /var/run/wifi-$phy.pid -B /var/run/hostapd-$phy.conf || {
+			echo "Failed to start hostapd for $phy"
+			return
+		}
+		sleep 2
 
+		for vif in $vifs; do
+			config_get mode "$vif" mode
+			config_get ifname "$vif" ifname
+			[ "$mode" = "ap" ] || continue
+			hostapd_ctrl="${hostapd_ctrl:-/var/run/hostapd-$phy/$ifname}"
+			mac80211_start_vif "$vif" "$ifname"
+		done
+	}
+
+	for vif in $vifs; do
+		config_get mode "$vif" mode
+		config_get ifname "$vif" ifname
+		[ ! "$mode" = "ap" ] || continue
 		ifconfig "$ifname" up
-		iwconfig "$ifname" channel "$channel" >/dev/null 2>/dev/null
-
-		local net_cfg bridge
-		net_cfg="$(find_net_config "$vif")"
-		[ -z "$net_cfg" ] || {
-			bridge="$(bridge_interface "$net_cfg")"
-			config_set "$vif" bridge "$bridge"
-			start_net "$ifname" "$net_cfg"
-		}
-		iwconfig "$ifname" essid "$ssid"
-		set_wifi_up "$vif" "$ifname"
-		case "$mode" in
-			ap)
-				if eval "type hostapd_setup_vif" 2>/dev/null >/dev/null; then
-					hostapd_setup_vif "$vif" nl80211 || {
-						echo "enable_mac80211($device): Failed to set up wpa for interface $ifname" >&2
-						# make sure this wifi interface won't accidentally stay open without encryption
-						ifconfig "$ifname" down
-						continue
-					}
-				fi
-			;;
-			sta)
-				if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then
-					wpa_supplicant_setup_vif "$vif" wext || {
-						echo "enable_mac80211($device): Failed to set up wpa_supplicant for interface $ifname" >&2
-						# make sure this wifi interface won't accidentally stay open without encryption
-						ifconfig "$ifname" down
-						continue
+
+		if [ ! "$mode" = "ap" ]; then
+			ifconfig "$ifname" up
+			case "$mode" in
+				adhoc)
+					config_get bssid "$vif" bssid
+					config_get ssid "$vif" ssid
+					config_get mcast_rate "$vif" mcast_rate
+					local mcval=""
+					[ -n "$mcast_rate" ] && {
+						mcval="$(($mcast_rate / 1000))"
+						mcsub="$(( ($mcast_rate / 100) % 10 ))"
+						[ "$mcsub" -gt 0 ] && mcval="$mcval.$mcsub"
 					}
-				fi
-			;;
-			mesh)
-				# special case where physical interface should be down for mesh to work
-				ifconfig "$ifname" down
-				ifconfig "msh$mesh_idx" up
-				iwlist msh$mesh_idx scan 2>/dev/null >/dev/null
-			;;
-		esac
-		first=0
-		mesh_idx=$(expr $mesh_idx + 1)
+					iw dev "$ifname" ibss join "$ssid" $freq ${fixed:+fixed-freq} $bssid ${mcval:+mcast-rate $mcval}
+				;;
+				sta)
+					if eval "type wpa_supplicant_setup_vif" 2>/dev/null >/dev/null; then
+						wpa_supplicant_setup_vif "$vif" nl80211 "${hostapd_ctrl:+-H $hostapd_ctrl}" || {
+							echo "enable_mac80211($device): Failed to set up wpa_supplicant for interface $ifname" >&2
+							# make sure this wifi interface won't accidentally stay open without encryption
+							ifconfig "$ifname" down
+							continue
+						}
+					fi
+				;;
+			esac
+			mac80211_start_vif "$vif" "$ifname"
+		fi
 	done
+
 }
 
 
+check_device() {
+	config_get phy "$1" phy
+	[ -z "$phy" ] && {
+		find_mac80211_phy "$1" >/dev/null || return 0
+		config_get phy "$1" phy
+	}
+	[ "$phy" = "$dev" ] && found=1
+}
+
 detect_mac80211() {
-	cd /sys/class/net
-	for dev in $(ls -d wlan* 2>&-); do
-		config_get type "$dev" type
-		[ "$type" = mac80211 ] && return
+	devidx=0
+	config_load wireless
+	while :; do
+		config_get type "radio$devidx" type
+		[ -n "$type" ] || break
+		devidx=$(($devidx + 1))
+	done
+	for dev in $(ls /sys/class/ieee80211); do
+		found=0
+		config_foreach check_device wifi-device
+		[ "$found" -gt 0 ] && continue
+
+		mode_11n=""
+		mode_band="g"
+		channel="11"
+		ht_cap=0
+		for cap in $(iw phy "$dev" info | grep 'Capabilities:' | cut -d: -f2); do
+			ht_cap="$(($ht_cap | $cap))"
+		done
+		ht_capab="";
+		[ "$ht_cap" -gt 0 ] && {
+			mode_11n="n"
+			append ht_capab "	option htmode	HT20" "$N"
+
+			list="	list ht_capab"
+			[ "$(($ht_cap & 1))" -eq 1 ] && append ht_capab "$list	LDPC" "$N"
+			[ "$(($ht_cap & 16))" -eq 16 ] && append ht_capab "$list	GF" "$N"
+			[ "$(($ht_cap & 32))" -eq 32 ] && append ht_capab "$list	SHORT-GI-20" "$N"
+			[ "$(($ht_cap & 64))" -eq 64 ] && append ht_capab "$list	SHORT-GI-40" "$N"
+			[ "$(($ht_cap & 128))" -eq 128 ] && append ht_capab "$list	TX-STBC" "$N"
+			[ "$(($ht_cap & 768))" -eq 256 ] && append ht_capab "$list	RX-STBC1" "$N"
+			[ "$(($ht_cap & 768))" -eq 512 ] && append ht_capab "$list	RX-STBC12" "$N"
+			[ "$(($ht_cap & 768))" -eq 768 ] && append ht_capab "$list	RX-STBC123" "$N"
+			[ "$(($ht_cap & 4096))" -eq 4096 ] && append ht_capab "$list	DSSS_CCK-40" "$N"
+		}
+		iw phy "$dev" info | grep -q '2412 MHz' || { mode_band="a"; channel="36"; }
+
 		cat <<EOF
-config wifi-device  $dev
+config wifi-device  radio$devidx
 	option type     mac80211
-	option channel  5
-
+	option channel  ${channel}
+	option macaddr	$(cat /sys/class/ieee80211/${dev}/macaddress)
+	option hwmode	11${mode_11n}${mode_band}
+$ht_capab
 	# REMOVE THIS LINE TO ENABLE WIFI:
 	option disabled 1
 
 config wifi-iface
-	option device	$dev
-	option network	lan
-	option mode	ap
-	option ssid	OpenWrt
+	option device   radio$devidx
+	option network  lan
+	option mode     ap
+	option ssid     OpenWrt
 	option encryption none
+
 EOF
+	devidx=$(($devidx + 1))
 	done
 }
+