X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/e7f0dfd6daa1d28bad9d1699b14973f7f5d1d787..1d108b82ccf6c196e0787ce100e60e60bcc1d23f:/openwrt/target/linux/linux-2.6/patches/brcm/001-bcm947xx.patch?ds=sidebyside

diff --git a/openwrt/target/linux/linux-2.6/patches/brcm/001-bcm947xx.patch b/openwrt/target/linux/linux-2.6/patches/brcm/001-bcm947xx.patch
index 2e9bca7a1..8f4531576 100644
--- a/openwrt/target/linux/linux-2.6/patches/brcm/001-bcm947xx.patch
+++ b/openwrt/target/linux/linux-2.6/patches/brcm/001-bcm947xx.patch
@@ -1,6 +1,6 @@
 diff -Nur linux-2.6.12.5/arch/mips/Kconfig linux-2.6.12.5-brcm/arch/mips/Kconfig
 --- linux-2.6.12.5/arch/mips/Kconfig	2005-08-15 02:20:18.000000000 +0200
-+++ linux-2.6.12.5-brcm/arch/mips/Kconfig	2005-08-28 16:21:04.700803432 +0200
++++ linux-2.6.12.5-brcm/arch/mips/Kconfig	2005-09-16 10:29:18.135597872 +0200
 @@ -40,6 +40,15 @@
  	 Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
  	 Olivetti M700-10 workstations.
@@ -22,1751 +22,1456 @@ diff -Nur linux-2.6.12.5/arch/mips/Kconfig linux-2.6.12.5-brcm/arch/mips/Kconfig
  config CPU_LITTLE_ENDIAN
  	bool "Generate little endian code"
 -	default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA
-+	default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA || BCM47XX
++	default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA || BCM947XX
  	default n if MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927
  	help
  	  Some MIPS machines can be configured for either little or big endian
-diff -Nur linux-2.6.12.5/arch/mips/Kconfig.orig linux-2.6.12.5-brcm/arch/mips/Kconfig.orig
---- linux-2.6.12.5/arch/mips/Kconfig.orig	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/Kconfig.orig	2005-08-15 02:20:18.000000000 +0200
-@@ -0,0 +1,1662 @@
-+config MIPS
-+	bool
-+	default y
-+	# Horrible source of confusion.  Die, die, die ...
-+	select EMBEDDED
-+
-+config MIPS64
-+	bool "64-bit kernel"
-+	help
-+	  Select this option if you want to build a 64-bit kernel.  You should
-+	  only select this option if you have hardware that actually has a
-+	  64-bit processor and if your application will actually benefit from
-+	  64-bit processing, otherwise say N.  You must say Y for kernels for
-+	  SGI IP27 (Origin 200 and 2000) and SGI IP32 (O2).  If in doubt say N.
-+
-+config 64BIT
-+	def_bool MIPS64
-+
-+config MIPS32
-+	bool
-+	depends on MIPS64 = 'n'
-+	default y
+diff -Nur linux-2.6.12.5/arch/mips/Makefile linux-2.6.12.5-brcm/arch/mips/Makefile
+--- linux-2.6.12.5/arch/mips/Makefile	2005-08-15 02:20:18.000000000 +0200
++++ linux-2.6.12.5-brcm/arch/mips/Makefile	2005-09-16 10:29:18.137597568 +0200
+@@ -79,7 +79,7 @@
+ cflags-y			+= -I $(TOPDIR)/include/asm/gcc
+ cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
+ cflags-y			+= $(call cc-option, -finline-limit=100000)
+-LDFLAGS_vmlinux			+= -G 0 -static -n
++LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
+ MODFLAGS			+= -mlong-calls
+ 
+ cflags-$(CONFIG_SB1XXX_CORELIS)	+= -mno-sched-prolog -fno-omit-frame-pointer
+@@ -170,6 +170,7 @@
+ cflags-$(CONFIG_CPU_MIPS32)	+= \
+ 			$(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \
+ 			-Wa,--trap
++cflags-$(CONFIG_CPU_MIPS32)	+= -Wa,--trap
+ 
+ cflags-$(CONFIG_CPU_MIPS64)	+= \
+ 			$(call set_gccflags,mips64,mips64,r4600,mips3,mips2) \
+@@ -618,6 +619,14 @@
+ load-$(CONFIG_SIBYTE_SWARM)	:= 0xffffffff80100000
+ 
+ #
++# Broadcom BCM47XX boards
++#
++core-$(CONFIG_BCM947XX)		+= arch/mips/bcm947xx/ arch/mips/bcm947xx/broadcom/
++cflags-$(CONFIG_BCM947XX)	+= -Iarch/mips/bcm947xx/include
++load-$(CONFIG_BCM947XX)		:= 0xffffffff80001000
 +
-+mainmenu "Linux/MIPS Kernel Configuration"
 +
-+source "init/Kconfig"
++#
+ # SNI RM200 PCI
+ #
+ core-$(CONFIG_SNI_RM200_PCI)	+= arch/mips/sni/
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/Makefile linux-2.6.12.5-brcm/arch/mips/bcm947xx/Makefile
+--- linux-2.6.12.5/arch/mips/bcm947xx/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/Makefile	2005-09-16 10:29:18.149595744 +0200
+@@ -0,0 +1,6 @@
++#
++# Makefile for the BCM47xx specific kernel interface routines
++# under Linux.
++#
 +
-+menu "Machine selection"
++obj-y := irq.o int-handler.o prom.o setup.o time.o
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/Makefile linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/Makefile
+--- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/Makefile	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/Makefile	2005-09-16 10:29:18.149595744 +0200
+@@ -0,0 +1,6 @@
++#
++# Makefile for the BCM47xx specific kernel interface routines
++# under Linux.
++#
 +
-+config MACH_JAZZ
-+	bool "Support for the Jazz family of machines"
-+	select ARC
-+	select ARC32
-+	select GENERIC_ISA_DMA
-+	select I8259
-+	select ISA
-+	help
-+	 This a family of machines based on the MIPS R4030 chipset which was
-+	 used by several vendors to build RISC/os and Windows NT workstations.
-+	 Members include the Acer PICA, MIPS Magnum 4000, MIPS Millenium and
-+	 Olivetti M700-10 workstations.
-+
-+config ACER_PICA_61
-+	bool "Support for Acer PICA 1 chipset (EXPERIMENTAL)"
-+	depends on MACH_JAZZ && EXPERIMENTAL
-+	select DMA_NONCOHERENT
-+	help
-+	  This is a machine with a R4400 133/150 MHz CPU. To compile a Linux
-+	  kernel that runs on these, say Y here. For details about Linux on
-+	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
-+	  <http://www.linux-mips.org/>.
-+
-+config MIPS_MAGNUM_4000
-+	bool "Support for MIPS Magnum 4000"
-+	depends on MACH_JAZZ
-+	select DMA_NONCOHERENT
-+	help
-+	  This is a machine with a R4000 100 MHz CPU. To compile a Linux
-+	  kernel that runs on these, say Y here. For details about Linux on
-+	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
-+	  <http://www.linux-mips.org/>.
-+
-+config OLIVETTI_M700
-+	bool "Support for Olivetti M700-10"
-+	depends on MACH_JAZZ
-+	select DMA_NONCOHERENT
-+	help
-+	  This is a machine with a R4000 100 MHz CPU. To compile a Linux
-+	  kernel that runs on these, say Y here. For details about Linux on
-+	  the MIPS architecture, check out the Linux/MIPS FAQ on the WWW at
-+	  <http://www.linux-mips.org/>.
-+
-+config MACH_VR41XX
-+	bool "Support for NEC VR41XX-based machines"
-+
-+config NEC_CMBVR4133
-+	bool "Support for NEC CMB-VR4133"
-+	depends on MACH_VR41XX
-+	select CPU_VR41XX
-+	select DMA_NONCOHERENT
-+	select IRQ_CPU
-+	select HW_HAS_PCI
-+	select PCI_VR41XX
++obj-y   := sbutils.o linux_osl.o bcmsrom.o bcmutils.o sbmips.o sbpci.o hnddma.o
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmsrom.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmsrom.c
+--- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmsrom.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmsrom.c	2005-09-16 10:29:18.150595592 +0200
+@@ -0,0 +1,685 @@
++/*
++ *  Misc useful routines to access NIC SROM
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ * 
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ * $Id: bcmsrom.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
++ */
 +
-+config ROCKHOPPER
-+	bool "Support for Rockhopper baseboard"
-+	depends on NEC_CMBVR4133
-+	select I8259
-+	select HAVE_STD_PC_SERIAL_PORT
++#include <typedefs.h>
++#include <osl.h>
++#include <bcmutils.h>
++#include <bcmsrom.h>
++#include <bcmdevs.h>
++#include <bcmendian.h>
++#include <sbpcmcia.h>
++#include <pcicfg.h>
 +
-+config CASIO_E55
-+	bool "Support for CASIO CASSIOPEIA E-10/15/55/65"
-+	depends on MACH_VR41XX
-+	select DMA_NONCOHERENT
-+	select IRQ_CPU
-+	select ISA
++#include <proto/ethernet.h>	/* for sprom content groking */
 +
-+config IBM_WORKPAD
-+	bool "Support for IBM WorkPad z50"
-+	depends on MACH_VR41XX
-+	select DMA_NONCOHERENT
-+	select IRQ_CPU
-+	select ISA
++#define	VARS_MAX	4096	/* should be reduced */
 +
-+config TANBAC_TB0226
-+	bool "Support for TANBAC TB0226 (Mbase)"
-+	depends on MACH_VR41XX
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select IRQ_CPU
-+	help
-+	  The TANBAC TB0226 (Mbase) is a MIPS-based platform manufactured by TANBAC.
-+	  Please refer to <http://www.tanbac.co.jp/> about Mbase.
++static int initvars_srom_pci(void *curmap, char **vars, int *count);
++static int initvars_cis_pcmcia(void *osh, char **vars, int *count);
++static int sprom_cmd_pcmcia(void *osh, uint8 cmd);
++static int sprom_read_pcmcia(void *osh, uint16 addr, uint16 *data);
++static int sprom_write_pcmcia(void *osh, uint16 addr, uint16 data);
++static int sprom_read_pci(uint16 *sprom, uint byteoff, uint16 *buf, uint nbytes, bool check_crc);
 +
-+config TANBAC_TB0229
-+	bool "Support for TANBAC TB0229 (VR4131DIMM)"
-+	depends on MACH_VR41XX
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select IRQ_CPU
-+	help
-+	  The TANBAC TB0229 (VR4131DIMM) is a MIPS-based platform manufactured by TANBAC.
-+	  Please refer to <http://www.tanbac.co.jp/> about VR4131DIMM.
++/*
++ * Initialize the vars from the right source for this platform.
++ * Return 0 on success, nonzero on error.
++ */
++int
++srom_var_init(uint bus, void *curmap, void *osh, char **vars, int *count)
++{
++	if (vars == NULL)
++		return (0);
 +
-+config VICTOR_MPC30X
-+	bool "Support for Victor MP-C303/304"
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select IRQ_CPU
-+	depends on MACH_VR41XX
++	switch (bus) {
++	case SB_BUS:
++		/* These two could be asserts ... */
++		*vars = NULL;
++		*count = 0;
++		return(0);
 +
-+config ZAO_CAPCELLA
-+	bool "Support for ZAO Networks Capcella"
-+	depends on MACH_VR41XX
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select IRQ_CPU
++	case PCI_BUS:
++		ASSERT(curmap);	/* can not be NULL */
++		return(initvars_srom_pci(curmap, vars, count));
 +
-+config PCI_VR41XX
-+	bool "Add PCI control unit support of NEC VR4100 series"
-+	depends on MACH_VR41XX && PCI
-+
-+config VRC4171
-+	tristate "Add NEC VRC4171 companion chip support"
-+	depends on MACH_VR41XX && ISA
-+	---help---
-+	  The NEC VRC4171/4171A is a companion chip for NEC VR4111/VR4121.
-+
-+config VRC4173
-+	tristate "Add NEC VRC4173 companion chip support"
-+	depends on MACH_VR41XX && PCI_VR41XX
-+	---help---
-+	  The NEC VRC4173 is a companion chip for NEC VR4122/VR4131.
-+
-+config TOSHIBA_JMR3927
-+	bool "Support for Toshiba JMR-TX3927 board"
-+	depends on MIPS32
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select SWAP_IO_SPACE
++	case PCMCIA_BUS:
++		return(initvars_cis_pcmcia(osh, vars, count));
 +
-+config MIPS_COBALT
-+	bool "Support for Cobalt Server (EXPERIMENTAL)"
-+	depends on EXPERIMENTAL
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select I8259
-+	select IRQ_CPU
 +
-+config MACH_DECSTATION
-+	bool "Support for DECstations"
-+	select BOOT_ELF32
-+	select DMA_NONCOHERENT
-+	select IRQ_CPU
-+	depends on MIPS32 || EXPERIMENTAL
-+	---help---
-+	  This enables support for DEC's MIPS based workstations.  For details
-+	  see the Linux/MIPS FAQ on <http://www.linux-mips.org/> and the
-+	  DECstation porting pages on <http://decstation.unix-ag.org/>.
++	default:
++		ASSERT(0);
++	}
++	return (-1);
++}
 +
-+	  If you have one of the following DECstation Models you definitely
-+	  want to choose R4xx0 for the CPU Type:
 +
-+	  	DECstation 5000/50
-+	  	DECstation 5000/150
-+	  	DECstation 5000/260
-+	  	DECsystem 5900/260
++/* support only 16-bit word read from srom */
++int
++srom_read(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf)
++{
++	void *srom;
++	uint i, off, nw;
 +
-+	  otherwise choose R3000.
++	/* check input - 16-bit access only */
++	if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2))
++		return 1;
 +
-+config MIPS_EV64120
-+	bool "Support for Galileo EV64120 Evaluation board (EXPERIMENTAL)"
-+	depends on EXPERIMENTAL
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select MIPS_GT64120
-+	help
-+	  This is an evaluation board based on the Galileo GT-64120
-+	  single-chip system controller that contains a MIPS R5000 compatible
-+	  core running at 75/100MHz.  Their website is located at
-+	  <http://www.marvell.com/>.  Say Y here if you wish to build a
-+	  kernel for this platform.
-+
-+config EVB_PCI1
-+	bool "Enable Second PCI (PCI1)"
-+	depends on MIPS_EV64120
-+
-+config MIPS_EV96100
-+	bool "Support for Galileo EV96100 Evaluation board (EXPERIMENTAL)"
-+	depends on EXPERIMENTAL
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select IRQ_CPU
-+	select MIPS_GT96100
-+	select RM7000_CPU_SCACHE
-+	select SWAP_IO_SPACE
-+	help
-+	  This is an evaluation board based on the Galileo GT-96100 LAN/WAN
-+	  communications controllers containing a MIPS R5000 compatible core
-+	  running at 83MHz. Their website is <http://www.marvell.com/>. Say Y
-+	  here if you wish to build a kernel for this platform.
++	if (bus == PCI_BUS) {
++		if (!curmap)
++			return 1;
++		srom = (void *)((uint)curmap + PCI_BAR0_SPROM_OFFSET);
++		if (sprom_read_pci(srom, byteoff, buf, nbytes, FALSE))
++			return 1;
++	} else if (bus == PCMCIA_BUS) {
++		off = byteoff / 2;
++		nw = nbytes / 2;
++		for (i = 0; i < nw; i++) {
++			if (sprom_read_pcmcia(osh, (uint16)(off + i), (uint16*)(buf + i)))
++				return 1;
++		}
++	} else {
++		return 1;
++	}
 +
-+config MIPS_IVR
-+	bool "Support for Globespan IVR board"
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	help
-+	  This is an evaluation board built by Globespan to showcase thir
-+	  iVR (Internet Video Recorder) design. It utilizes a QED RM5231
-+	  R5000 MIPS core. More information can be found out their website
-+	  located at <http://www.globespan.net/>. Say Y here if you wish to
-+	  build a kernel for this platform.
-+
-+config LASAT
-+	bool "Support for LASAT Networks platforms"
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select MIPS_GT64120
-+	select R5000_CPU_SCACHE
++	return 0;
++}
 +
-+config PICVUE
-+	tristate "PICVUE LCD display driver"
-+	depends on LASAT
++/* support only 16-bit word write into srom */
++int
++srom_write(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf)
++{
++	uint16 *srom;
++	uint i, off, nw, crc_range;
++	uint16 image[SPROM_SIZE], *p;
++	uint8 crc;
++	volatile uint32 val32;
 +
-+config PICVUE_PROC
-+	tristate "PICVUE LCD display driver /proc interface"
-+	depends on PICVUE
++	/* check input - 16-bit access only */
++	if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2))
++		return 1;
 +
-+config DS1603
-+	bool "DS1603 RTC driver"
-+	depends on LASAT
++	crc_range = ((bus == PCMCIA_BUS) ? SPROM_SIZE : SPROM_CRC_RANGE) * 2;
 +
-+config LASAT_SYSCTL
-+	bool "LASAT sysctl interface"
-+	depends on LASAT
++	/* if changes made inside crc cover range */
++	if (byteoff < crc_range) {
++		nw = (((byteoff + nbytes) > crc_range) ? byteoff + nbytes : crc_range) / 2;
++		/* read data including entire first 64 words from srom */
++		if (srom_read(bus, curmap, osh, 0, nw * 2, image))
++			return 1;
++		/* make changes */
++		bcopy((void*)buf, (void*)&image[byteoff / 2], nbytes);
++		/* calculate crc */
++		htol16_buf(image, crc_range);
++		crc = ~crc8((uint8 *)image, crc_range - 1, CRC8_INIT_VALUE);
++		ltoh16_buf(image, crc_range);
++		image[(crc_range / 2) - 1] = (crc << 8) | (image[(crc_range / 2) - 1] & 0xff);
++		p = image;
++		off = 0;
++	} else {
++		p = buf;
++		off = byteoff / 2;
++		nw = nbytes / 2;
++	}
 +
-+config MIPS_ITE8172
-+	bool "Support for ITE 8172G board"
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	help
-+	  Ths is an evaluation board made by ITE <http://www.ite.com.tw/>
-+	  with ATX form factor that utilizes a MIPS R5000 to work with its
-+	  ITE8172G companion internet appliance chip. The MIPS core can be
-+	  either a NEC Vr5432 or QED RM5231. Say Y here if you wish to build
-+	  a kernel for this platform.
-+
-+config IT8172_REVC
-+	bool "Support for older IT8172 (Rev C)"
-+	depends on MIPS_ITE8172
-+	help
-+	  Say Y here to support the older, Revision C version of the Integrated
-+	  Technology Express, Inc. ITE8172 SBC.  Vendor page at
-+	  <http://www.ite.com.tw/ia/brief_it8172bsp.htm>; picture of the
-+	  board at <http://www.mvista.com/partners/semiconductor/ite.html>.
-+
-+config MIPS_ATLAS
-+	bool "Support for MIPS Atlas board"
-+	select BOOT_ELF32
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select MIPS_GT64120
-+	select SWAP_IO_SPACE
-+	help
-+	  This enables support for the QED R5231-based MIPS Atlas evaluation
-+	  board.
++	if (bus == PCI_BUS) {
++		srom = (uint16*)((uint)curmap + PCI_BAR0_SPROM_OFFSET);
++		/* enable writes to the SPROM */
++		val32 = OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32));
++		val32 |= SPROM_WRITEEN;
++		OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32);
++		bcm_mdelay(500);
++		/* write srom */
++		for (i = 0; i < nw; i++) {
++			W_REG(&srom[off + i], p[i]);
++			bcm_mdelay(20);
++		}
++		/* disable writes to the SPROM */
++		OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32 & ~SPROM_WRITEEN);
++	} else if (bus == PCMCIA_BUS) {
++		/* enable writes to the SPROM */
++		if (sprom_cmd_pcmcia(osh, SROM_WEN))
++			return 1;
++		bcm_mdelay(500);
++		/* write srom */
++		for (i = 0; i < nw; i++) {
++			sprom_write_pcmcia(osh, (uint16)(off + i), p[i]);
++			bcm_mdelay(20);
++		}
++		/* disable writes to the SPROM */
++		if (sprom_cmd_pcmcia(osh, SROM_WDS))
++			return 1;
++	} else {
++		return 1;
++	}
 +
-+config MIPS_MALTA
-+	bool "Support for MIPS Malta board"
-+	select BOOT_ELF32
-+	select HAVE_STD_PC_SERIAL_PORT
-+	select DMA_NONCOHERENT
-+	select GENERIC_ISA_DMA
-+	select HW_HAS_PCI
-+	select I8259
-+	select MIPS_GT64120
-+	select SWAP_IO_SPACE
-+	help
-+	  This enables support for the VR5000-based MIPS Malta evaluation
-+	  board.
++	bcm_mdelay(500);
++	return 0;
++}
 +
-+config MIPS_SEAD
-+	bool "Support for MIPS SEAD board (EXPERIMENTAL)"
-+	depends on EXPERIMENTAL
-+	select IRQ_CPU
-+	select DMA_NONCOHERENT
 +
-+config MOMENCO_OCELOT
-+	bool "Support for Momentum Ocelot board"
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select IRQ_CPU
-+	select IRQ_CPU_RM7K
-+	select MIPS_GT64120
-+	select RM7000_CPU_SCACHE
-+	select SWAP_IO_SPACE
-+	help
-+	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
-+	  Momentum Computer <http://www.momenco.com/>.
++int
++srom_parsecis(uint8 *cis, char **vars, int *count)
++{
++	char eabuf[32];
++	char *vp, *base;
++	uint8 tup, tlen, sromrev = 1;
++	int i, j;
++	uint varsize;
++	bool ag_init = FALSE;
++	uint16 w;
 +
-+config MOMENCO_OCELOT_G
-+	bool "Support for Momentum Ocelot-G board"
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select IRQ_CPU
-+	select IRQ_CPU_RM7K
-+	select PCI_MARVELL
-+	select RM7000_CPU_SCACHE
-+	select SWAP_IO_SPACE
-+	help
-+	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
-+	  Momentum Computer <http://www.momenco.com/>.
++	ASSERT(vars);
++	ASSERT(count);
 +
-+config MOMENCO_OCELOT_C
-+	bool "Support for Momentum Ocelot-C board"
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select IRQ_CPU
-+	select IRQ_MV64340
-+	select PCI_MARVELL
-+	select RM7000_CPU_SCACHE
-+	select SWAP_IO_SPACE
-+	help
-+	  The Ocelot is a MIPS-based Single Board Computer (SBC) made by
-+	  Momentum Computer <http://www.momenco.com/>.
++	base = vp = MALLOC(VARS_MAX);
++	ASSERT(vp);
 +
-+config MOMENCO_OCELOT_3
-+	bool "Support for Momentum Ocelot-3 board"
-+	select BOOT_ELF32
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select IRQ_CPU
-+	select IRQ_CPU_RM7K
-+	select IRQ_MV64340
-+	select PCI_MARVELL
-+	select RM7000_CPU_SCACHE
-+	select SWAP_IO_SPACE
-+	help
-+	  The Ocelot-3 is based off Discovery III System Controller and
-+	  PMC-Sierra Rm79000 core.
++	i = 0;
++	do {
++		tup = cis[i++];
++		tlen = cis[i++];
 +
-+config MOMENCO_JAGUAR_ATX
-+	bool "Support for Momentum Jaguar board"
-+	select BOOT_ELF32
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select IRQ_CPU
-+	select IRQ_CPU_RM7K
-+	select IRQ_MV64340
-+	select LIMITED_DMA
-+	select PCI_MARVELL
-+	select RM7000_CPU_SCACHE
-+	select SWAP_IO_SPACE
-+	help
-+	  The Jaguar ATX is a MIPS-based Single Board Computer (SBC) made by
-+	  Momentum Computer <http://www.momenco.com/>.
++		switch (tup) {
++		case CISTPL_MANFID:
++			vp += sprintf(vp, "manfid=%d", (cis[i + 1] << 8) + cis[i]);
++			vp++;
++			vp += sprintf(vp, "prodid=%d", (cis[i + 3] << 8) + cis[i + 2]);
++			vp++;
++			break;
 +
-+config JAGUAR_DMALOW
-+	bool "Low DMA Mode"
-+	depends on MOMENCO_JAGUAR_ATX
-+	help
-+	  Select to Y if jump JP5 is set on your board, N otherwise.  Normally
-+	  the jumper is set, so if you feel unsafe, just say Y.
++		case CISTPL_FUNCE:
++			if (cis[i] == LAN_NID) {
++				ASSERT(cis[i + 1] == ETHER_ADDR_LEN);
++				bcm_ether_ntoa((uchar*)&cis[i + 2], eabuf);
++				vp += sprintf(vp, "il0macaddr=%s", eabuf);
++				vp++;
++			}
++			break;
 +
-+config PMC_YOSEMITE
-+	bool "Support for PMC-Sierra Yosemite eval board"
-+	select DMA_COHERENT
-+	select HW_HAS_PCI
-+	select IRQ_CPU
-+	select IRQ_CPU_RM7K
-+	select IRQ_CPU_RM9K
-+	select SWAP_IO_SPACE
-+	help
-+	  Yosemite is an evaluation board for the RM9000x2 processor
-+	  manufactured by PMC-Sierra
++		case CISTPL_CFTABLE:
++			vp += sprintf(vp, "regwindowsz=%d", (cis[i + 7] << 8) | cis[i + 6]);
++			vp++;
++			break;
 +
-+config HYPERTRANSPORT
-+	bool "Hypertransport Support for PMC-Sierra Yosemite"
-+	depends on PMC_YOSEMITE
++		case CISTPL_BRCM_HNBU:
++			switch (cis[i]) {
++			case HNBU_CHIPID:
++				vp += sprintf(vp, "vendid=%d", (cis[i + 2] << 8) + cis[i + 1]);
++				vp++;
++				vp += sprintf(vp, "devid=%d", (cis[i + 4] << 8) + cis[i + 3]);
++				vp++;
++				if (tlen == 7) {
++					vp += sprintf(vp, "chiprev=%d", (cis[i + 6] << 8) + cis[i + 5]);
++					vp++;
++				}
++				break;
 +
-+config DDB5074
-+	bool "Support for NEC DDB Vrc-5074 (EXPERIMENTAL)"
-+	depends on EXPERIMENTAL
-+	select DMA_NONCOHERENT
-+	select HAVE_STD_PC_SERIAL_PORT
-+	select HW_HAS_PCI
-+	select IRQ_CPU
-+	select I8259
-+	select ISA
-+	help
-+	  This enables support for the VR5000-based NEC DDB Vrc-5074
-+	  evaluation board.
++			case HNBU_BOARDREV:
++				vp += sprintf(vp, "boardrev=%d", cis[i + 1]);
++				vp++;
++				break;
 +
-+config DDB5476
-+	bool "Support for NEC DDB Vrc-5476"
-+	select DMA_NONCOHERENT
-+	select HAVE_STD_PC_SERIAL_PORT
-+	select HW_HAS_PCI
-+	select IRQ_CPU
-+	select I8259
-+	select ISA
-+	help
-+	  This enables support for the R5432-based NEC DDB Vrc-5476
-+	  evaluation board.
++			case HNBU_AA:
++				vp += sprintf(vp, "aa0=%d", cis[i + 1]);
++				vp++;
++				break;
 +
-+	  Features : kernel debugging, serial terminal, NFS root fs, on-board
-+	  ether port USB, AC97, PCI, PCI VGA card & framebuffer console,
-+	  IDE controller, PS2 keyboard, PS2 mouse, etc.
++			case HNBU_AG:
++				vp += sprintf(vp, "ag0=%d", cis[i + 1]);
++				vp++;
++				ag_init = TRUE;
++				break;
 +
-+config DDB5477
-+	bool "Support for NEC DDB Vrc-5477"
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select I8259
-+	select IRQ_CPU
-+	help
-+	  This enables support for the R5432-based NEC DDB Vrc-5477,
-+	  or Rockhopper/SolutionGear boards with R5432/R5500 CPUs.
++			case HNBU_CC:
++				vp += sprintf(vp, "cc=%d", cis[i + 1]);
++				vp++;
++				break;
 +
-+	  Features : kernel debugging, serial terminal, NFS root fs, on-board
-+	  ether port USB, AC97, PCI, etc.
++			case HNBU_PAPARMS:
++				vp += sprintf(vp, "pa0maxpwr=%d", cis[i + tlen - 1]);
++				vp++;
++				if (tlen == 9) {
++					/* New version */
++					for (j = 0; j < 3; j++) {
++						vp += sprintf(vp, "pa0b%d=%d", j,
++							      (cis[i + (j * 2) + 2] << 8) + cis[i + (j * 2) + 1]);
++						vp++;
++					}
++					vp += sprintf(vp, "pa0itssit=%d", cis[i + 7]);
++					vp++;
++				}
++				break;
 +
-+config DDB5477_BUS_FREQUENCY
-+	int "bus frequency (in kHZ, 0 for auto-detect)"
-+	depends on DDB5477
-+	default 0
++			case HNBU_OEM:
++				vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x",
++					cis[i + 1], cis[i + 2], cis[i + 3], cis[i + 4],
++					cis[i + 5], cis[i + 6], cis[i + 7], cis[i + 8]);
++				vp++;
++				break;
++			case HNBU_BOARDFLAGS:
++				w = (cis[i + 2] << 8) + cis[i + 1];
++				if (w == 0xffff) w = 0;
++				vp += sprintf(vp, "boardflags=%d", w);
++				vp++;
++				break;
++			case HNBU_LED:
++				if (cis[i + 1] != 0xff) {
++					vp += sprintf(vp, "wl0gpio0=%d", cis[i + 1]);
++					vp++;
++				}
++				if (cis[i + 2] != 0xff) {
++					vp += sprintf(vp, "wl0gpio1=%d", cis[i + 2]);
++					vp++;
++				}
++				if (cis[i + 3] != 0xff) {
++					vp += sprintf(vp, "wl0gpio2=%d", cis[i + 3]);
++					vp++;
++				}
++				if (cis[i + 4] != 0xff) {
++					vp += sprintf(vp, "wl0gpio3=%d", cis[i + 4]);
++					vp++;
++				}
++				break;
++			}
++			break;
 +
-+config NEC_OSPREY
-+	bool "Support for NEC Osprey board"
-+	select DMA_NONCOHERENT
-+	select IRQ_CPU
++		}
++		i += tlen;
++	} while (tup != 0xff);
 +
-+config SGI_IP22
-+	bool "Support for SGI IP22 (Indy/Indigo2)"
-+	select ARC
-+	select ARC32
-+	select BOOT_ELF32
-+	select DMA_NONCOHERENT
-+	select IP22_CPU_SCACHE
-+	select IRQ_CPU
-+	select SWAP_IO_SPACE
-+	help
-+	  This are the SGI Indy, Challenge S and Indigo2, as well as certain
-+	  OEM variants like the Tandem CMN B006S. To compile a Linux kernel
-+	  that runs on these, say Y here.
-+
-+config SGI_IP27
-+	bool "Support for SGI IP27 (Origin200/2000)"
-+	depends on MIPS64
-+	select ARC
-+	select ARC64
-+	select DMA_IP27
-+	select HW_HAS_PCI
-+	select PCI_DOMAINS
-+	help
-+	  This are the SGI Origin 200, Origin 2000 and Onyx 2 Graphics
-+	  workstations.  To compile a Linux kernel that runs on these, say Y
-+	  here.
-+
-+#config SGI_SN0_XXL
-+#	bool "IP27 XXL"
-+#	depends on SGI_IP27
-+#	  This options adds support for userspace processes upto 16TB size.
-+#	  Normally the limit is just .5TB.
-+
-+config SGI_SN0_N_MODE
-+	bool "IP27 N-Mode"
-+	depends on SGI_IP27
-+	help
-+	  The nodes of Origin 200, Origin 2000 and Onyx 2 systems can be
-+	  configured in either N-Modes which allows for more nodes or M-Mode
-+	  which allows for more memory.  Your system is most probably
-+	  running in M-Mode, so you should say N here.
-+
-+config DISCONTIGMEM
-+	bool
-+	default y if SGI_IP27
-+	help
-+	  Say Y to upport efficient handling of discontiguous physical memory,
-+	  for architectures which are either NUMA (Non-Uniform Memory Access)
-+	  or have huge holes in the physical address space for other reasons.
-+	  See <file:Documentation/vm/numa> for more.
-+
-+config NUMA
-+	bool "NUMA Support"
-+	depends on SGI_IP27
-+	help
-+	  Say Y to compile the kernel to support NUMA (Non-Uniform Memory
-+	  Access).  This option is for configuring high-end multiprocessor
-+	  server machines.  If in doubt, say N.
++	/* Set the srom version */
++	vp += sprintf(vp, "sromrev=%d", sromrev);
++	vp++;
 +
-+config MAPPED_KERNEL
-+	bool "Mapped kernel support"
-+	depends on SGI_IP27
-+	help
-+	  Change the way a Linux kernel is loaded into memory on a MIPS64
-+	  machine.  This is required in order to support text replication and
-+	  NUMA.  If you need to understand it, read the source code.
++	/* For now just set boardflags2 to zero */
++	vp += sprintf(vp, "boardflags2=0");
++	vp++;
 +
-+config REPLICATE_KTEXT
-+	bool "Kernel text replication support"
-+	depends on SGI_IP27
-+	help
-+	  Say Y here to enable replicating the kernel text across multiple
-+	  nodes in a NUMA cluster.  This trades memory for speed.
++	/* if there is no antenna gain field, set default */
++	if (ag_init == FALSE) {
++		vp += sprintf(vp, "ag0=%d", 0xff);
++		vp++;
++	}
 +
-+config REPLICATE_EXHANDLERS
-+	bool "Exception handler replication support"
-+	depends on SGI_IP27
-+	help
-+	  Say Y here to enable replicating the kernel exception handlers
-+	  across multiple nodes in a NUMA cluster. This trades memory for
-+	  speed.
-+
-+config SGI_IP32
-+	bool "Support for SGI IP32 (O2) (EXPERIMENTAL)"
-+	depends on MIPS64 && EXPERIMENTAL
-+	select ARC
-+	select ARC32
-+	select BOOT_ELF32
-+	select OWN_DMA
-+	select DMA_IP32
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select R5000_CPU_SCACHE
-+	select RM7000_CPU_SCACHE
-+	help
-+	  If you want this kernel to run on SGI O2 workstation, say Y here.
++	/* final nullbyte terminator */
++	*vp++ = '\0';
++	varsize = (uint)vp - (uint)base;
 +
-+config SOC_AU1X00
-+	depends on MIPS32
-+	bool "Support for AMD/Alchemy Au1X00 SOCs"
++	ASSERT(varsize < VARS_MAX);
 +
-+choice
-+	prompt "Au1X00 SOC Type"
-+	depends on SOC_AU1X00
-+	help
-+	  Say Y here to enable support for one of three AMD/Alchemy
-+	  SOCs. For additional documentation see www.amd.com.
-+
-+config SOC_AU1000
-+	bool "SOC_AU1000"
-+config SOC_AU1100
-+	bool "SOC_AU1100"
-+config SOC_AU1500
-+	bool "SOC_AU1500"
-+config SOC_AU1550
-+	bool "SOC_AU1550"
-+
-+endchoice
-+
-+choice
-+	prompt "AMD/Alchemy Au1x00 board support"
-+	depends on SOC_AU1X00
-+	help
-+	  These are evaluation boards built by AMD/Alchemy to
-+	  showcase their Au1X00 Internet Edge Processors. The SOC design
-+	  is based on the MIPS32 architecture running at 266/400/500MHz
-+	  with many integrated peripherals. Further information can be
-+	  found at their website, <http://www.amd.com/>. Say Y here if you
-+	  wish to build a kernel for this platform.
-+
-+config MIPS_PB1000
-+	bool "PB1000 board"
-+	depends on SOC_AU1000
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select SWAP_IO_SPACE
++	if (varsize == VARS_MAX) {
++		*vars = base;
++	} else {
++		vp = MALLOC(varsize);
++		ASSERT(vp);
++		bcopy(base, vp, varsize);
++		MFREE(base, VARS_MAX);
++		*vars = vp;
++	}
++	*count = varsize;
 +
-+config MIPS_PB1100
-+	bool "PB1100 board"
-+	depends on SOC_AU1100
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
-+	select SWAP_IO_SPACE
++	return (0);
++}
 +
-+config MIPS_PB1500
-+	bool "PB1500 board"
-+	depends on SOC_AU1500
-+	select DMA_COHERENT
-+	select HW_HAS_PCI
 +
-+config MIPS_PB1550
-+	bool "PB1550 board"
-+	depends on SOC_AU1550
-+	select DMA_COHERENT
-+	select HW_HAS_PCI
-+	select MIPS_DISABLE_OBSOLETE_IDE
++/* set PCMCIA sprom command register */
++static int
++sprom_cmd_pcmcia(void *osh, uint8 cmd)
++{
++	uint8 status;
++	uint wait_cnt = 1000;
 +
-+config MIPS_DB1000
-+	bool "DB1000 board"
-+	depends on SOC_AU1000
-+	select DMA_NONCOHERENT
-+	select HW_HAS_PCI
++	/* write sprom command register */
++	OSL_PCMCIA_WRITE_ATTR(osh, SROM_CS, &cmd, 1);
 +
-+config MIPS_DB1100
-+	bool "DB1100 board"
-+	depends on SOC_AU1100
-+	select DMA_NONCOHERENT
++	/* wait status */
++	while (wait_cnt--) {
++		OSL_PCMCIA_READ_ATTR(osh, SROM_CS, &status, 1);
++		if (status & SROM_DONE)
++			return 0;
++	}
++	return 1;
++}
 +
-+config MIPS_DB1500
-+	bool "DB1500 board"
-+	depends on SOC_AU1500
-+	select DMA_COHERENT
-+	select HW_HAS_PCI
-+	select MIPS_DISABLE_OBSOLETE_IDE
++/* read a word from the PCMCIA srom */
++static int
++sprom_read_pcmcia(void *osh, uint16 addr, uint16 *data)
++{
++	uint8 addr_l, addr_h, data_l, data_h;
 +
-+config MIPS_DB1550
-+	bool "DB1550 board"
-+	depends on SOC_AU1550
-+	select HW_HAS_PCI
-+	select DMA_COHERENT
-+	select MIPS_DISABLE_OBSOLETE_IDE
++	addr_l = (uint8)((addr * 2) & 0xff);
++	addr_h = (uint8)(((addr * 2) >> 8) & 0xff);
 +
-+config MIPS_BOSPORUS
-+	bool "Bosporus board"
-+	depends on SOC_AU1500
-+	select DMA_NONCOHERENT
++	/* set address */
++	OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1);
++	OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1);
 +
-+config MIPS_MIRAGE
-+	bool "Mirage board"
-+	depends on SOC_AU1500
-+	select DMA_NONCOHERENT
++	/* do read */
++	if (sprom_cmd_pcmcia(osh, SROM_READ))
++		return 1;
 +
-+config MIPS_XXS1500
-+	bool "MyCable XXS1500 board"
-+	depends on SOC_AU1500
-+	select DMA_NONCOHERENT
++	/* read data */
++	OSL_PCMCIA_READ_ATTR(osh, SROM_DATAH, &data_h, 1);
++	OSL_PCMCIA_READ_ATTR(osh, SROM_DATAL, &data_l, 1);
 +
-+config MIPS_MTX1
-+	bool "4G Systems MTX-1 board"
-+	depends on SOC_AU1500
-+	select HW_HAS_PCI
-+	select DMA_NONCOHERENT
++	*data = (data_h << 8) | data_l;
++	return 0;
++}
 +
-+endchoice
++/* write a word to the PCMCIA srom */
++static int
++sprom_write_pcmcia(void *osh, uint16 addr, uint16 data)
++{
++	uint8 addr_l, addr_h, data_l, data_h;
 +
-+config SIBYTE_SB1xxx_SOC
-+	bool "Support for Broadcom BCM1xxx SOCs (EXPERIMENTAL)"
-+	depends on EXPERIMENTAL
-+	select BOOT_ELF32
-+	select DMA_COHERENT
-+	select SWAP_IO_SPACE
++	addr_l = (uint8)((addr * 2) & 0xff);
++	addr_h = (uint8)(((addr * 2) >> 8) & 0xff);
++	data_l = (uint8)(data & 0xff);
++	data_h = (uint8)((data >> 8) & 0xff);
 +
-+choice
-+	prompt "BCM1xxx SOC-based board"
-+	depends on SIBYTE_SB1xxx_SOC
-+	default SIBYTE_SWARM
-+	help
-+	  Enable support for boards based on the SiByte line of SOCs
-+	  from Broadcom.  There are configurations for the known
-+	  evaluation boards, or you can choose "Other" and add your
-+	  own board support code.
-+
-+config SIBYTE_SWARM
-+	bool "BCM91250A-SWARM"
-+	select SIBYTE_SB1250
-+
-+config SIBYTE_SENTOSA
-+	bool "BCM91250E-Sentosa"
-+	select SIBYTE_SB1250
-+
-+config SIBYTE_RHONE
-+	bool "BCM91125E-Rhone"
-+	select SIBYTE_BCM1125H
-+
-+config SIBYTE_CARMEL
-+	bool "BCM91120x-Carmel"
-+	select SIBYTE_BCM1120
++	/* set address */
++	OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1);
++	OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1);
 +
-+config SIBYTE_PTSWARM
-+	bool "BCM91250PT-PTSWARM"
-+	select SIBYTE_SB1250
++	/* write data */
++	OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAH, &data_h, 1);
++	OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAL, &data_l, 1);
 +
-+config SIBYTE_LITTLESUR
-+	bool "BCM91250C2-LittleSur"
-+	select SIBYTE_SB1250
++	/* do write */
++	return sprom_cmd_pcmcia(osh, SROM_WRITE);
++}
 +
-+config SIBYTE_CRHINE
-+	bool "BCM91120C-CRhine"
-+	select SIBYTE_BCM1120
++/*
++ * Read in and validate sprom.
++ * Return 0 on success, nonzero on error.
++ */
++static int
++sprom_read_pci(uint16 *sprom, uint byteoff, uint16 *buf, uint nbytes, bool check_crc)
++{
++	int off, nw;
++	uint8 chk8;
++	int i;
 +
-+config SIBYTE_CRHONE
-+	bool "BCM91125C-CRhone"
-+	select SIBYTE_BCM1125
++	off = byteoff / 2;
++	nw = ROUNDUP(nbytes, 2) / 2;
 +
-+config SIBYTE_UNKNOWN
-+	bool "Other"
++	/* read the sprom */
++	for (i = 0; i < nw; i++)
++		buf[i] = R_REG(&sprom[off + i]);
 +
-+endchoice
++	if (check_crc) {
++		/* fixup the endianness so crc8 will pass */
++		htol16_buf(buf, nw * 2);
++		if ((chk8 = crc8((uchar*)buf, nbytes, CRC8_INIT_VALUE)) != CRC8_GOOD_VALUE)
++			return (1);
++		/* now correct the endianness of the byte array */
++		ltoh16_buf(buf, nw * 2);
++	}
 +
-+config SIBYTE_BOARD
-+	bool
-+	depends on SIBYTE_SB1xxx_SOC && !SIBYTE_UNKNOWN
-+	default y
++	return (0);
++}
 +
-+choice
-+	prompt "BCM1xxx SOC Type"
-+	depends on SIBYTE_UNKNOWN
-+	default SIBYTE_UNK_BCM1250
-+	help
-+	  Since you haven't chosen a known evaluation board from
-+	  Broadcom, you must explicitly pick the SOC this kernel is
-+	  targetted for.
++/*
++ * Initialize nonvolatile variable table from sprom.
++ * Return 0 on success, nonzero on error.
++ */
 +
-+config SIBYTE_UNK_BCM1250
-+	bool "BCM1250"
-+	select SIBYTE_SB1250
++static int
++initvars_srom_pci(void *curmap, char **vars, int *count)
++{
++	uint16 w, b[64];
++	uint8 sromrev;
++	struct ether_addr ea;
++	char eabuf[32];		     
++	int c, woff, i;
++	char *vp, *base;
 +
-+config SIBYTE_UNK_BCM1120
-+	bool "BCM1120"
-+	select SIBYTE_BCM1120
++	if (sprom_read_pci((void *)((uint)curmap + PCI_BAR0_SPROM_OFFSET), 0, b, sizeof (b), TRUE))
++		return (-1);
 +
-+config SIBYTE_UNK_BCM1125
-+	bool "BCM1125"
-+	select SIBYTE_BCM1125
++	/* top word of sprom contains version and crc8 */
++	sromrev = b[63] & 0xff;
++	if ((sromrev != 1) && (sromrev != 2)) {
++		return (-2);
++	}
 +
-+config SIBYTE_UNK_BCM1125H
-+	bool "BCM1125H"
-+	select SIBYTE_BCM1125H
++	ASSERT(vars);
++	ASSERT(count);
 +
-+endchoice
++	base = vp = MALLOC(VARS_MAX);
++	ASSERT(vp);
 +
-+config SIBYTE_SB1250
-+	bool
-+	select HW_HAS_PCI
++	vp += sprintf(vp, "sromrev=%d", sromrev);
++	vp++;
 +
-+config SIBYTE_BCM1120
-+	bool
-+	select SIBYTE_BCM112X
++	if (sromrev >= 2) {
++		/* New section takes over the 4th hardware function space */
 +
-+config SIBYTE_BCM1125
-+	bool
-+	select HW_HAS_PCI
-+	select SIBYTE_BCM112X
++		/* Word 28 is boardflags2 */
++		vp += sprintf(vp, "boardflags2=%d", b[28]);
++		vp++;
 +
-+config SIBYTE_BCM1125H
-+	bool
-+	select HW_HAS_PCI
-+	select SIBYTE_BCM112X
++		/* Word 29 is max power 11a high/low */
++		w = b[29];
++		vp += sprintf(vp, "pa1himaxpwr=%d", w & 0xff);
++		vp++;
++		vp += sprintf(vp, "pa1lomaxpwr=%d", (w >> 8) & 0xff);
++		vp++;
 +
-+config SIBYTE_BCM112X
-+	bool
++		/* Words 30-32 set the 11alow pa settings,
++		 * 33-35 are the 11ahigh ones.
++		 */
++		for (i = 0; i < 3; i++) {
++			vp += sprintf(vp, "pa1lob%d=%d", i, b[30 + i]);
++			vp++;
++			vp += sprintf(vp, "pa1hib%d=%d", i, b[33 + i]);
++			vp++;
++		}
++		w = b[59];
++		if (w == 0)
++			vp += sprintf(vp, "ccode=");
++		else
++			vp += sprintf(vp, "ccode=%c%c", (w >> 8), (w & 0xff));
++		vp++;
 +
-+choice
-+	prompt "SiByte SOC Stepping"
-+	depends on SIBYTE_SB1xxx_SOC
++	}
 +
-+config CPU_SB1_PASS_1
-+	bool "1250 Pass1"
-+	depends on SIBYTE_SB1250
-+	select CPU_HAS_PREFETCH
++	/* parameter section of sprom starts at byte offset 72 */
++	woff = 72/2;
 +
-+config CPU_SB1_PASS_2_1250
-+	bool "1250 An"
-+	depends on SIBYTE_SB1250
-+	select CPU_SB1_PASS_2
-+	help
-+	  Also called BCM1250 Pass 2
++	/* first 6 bytes are il0macaddr */
++	ea.octet[0] = (b[woff] >> 8) & 0xff;
++	ea.octet[1] = b[woff] & 0xff;
++	ea.octet[2] = (b[woff+1] >> 8) & 0xff;
++	ea.octet[3] = b[woff+1] & 0xff;
++	ea.octet[4] = (b[woff+2] >> 8) & 0xff;
++	ea.octet[5] = b[woff+2] & 0xff;
++	woff += ETHER_ADDR_LEN/2 ;
++	bcm_ether_ntoa((uchar*)&ea, eabuf);
++	vp += sprintf(vp, "il0macaddr=%s", eabuf);
++	vp++;
 +
-+config CPU_SB1_PASS_2_2
-+	bool "1250 Bn"
-+	depends on SIBYTE_SB1250
-+	select CPU_HAS_PREFETCH
-+	help
-+	  Also called BCM1250 Pass 2.2
++	/* next 6 bytes are et0macaddr */
++	ea.octet[0] = (b[woff] >> 8) & 0xff;
++	ea.octet[1] = b[woff] & 0xff;
++	ea.octet[2] = (b[woff+1] >> 8) & 0xff;
++	ea.octet[3] = b[woff+1] & 0xff;
++	ea.octet[4] = (b[woff+2] >> 8) & 0xff;
++	ea.octet[5] = b[woff+2] & 0xff;
++	woff += ETHER_ADDR_LEN/2 ;
++	bcm_ether_ntoa((uchar*)&ea, eabuf);
++	vp += sprintf(vp, "et0macaddr=%s", eabuf);
++	vp++;
 +
-+config CPU_SB1_PASS_4
-+	bool "1250 Cn"
-+	depends on SIBYTE_SB1250
-+	select CPU_HAS_PREFETCH
-+	help
-+	  Also called BCM1250 Pass 3
++	/* next 6 bytes are et1macaddr */
++	ea.octet[0] = (b[woff] >> 8) & 0xff;
++	ea.octet[1] = b[woff] & 0xff;
++	ea.octet[2] = (b[woff+1] >> 8) & 0xff;
++	ea.octet[3] = b[woff+1] & 0xff;
++	ea.octet[4] = (b[woff+2] >> 8) & 0xff;
++	ea.octet[5] = b[woff+2] & 0xff;
++	woff += ETHER_ADDR_LEN/2 ;
++	bcm_ether_ntoa((uchar*)&ea, eabuf);
++	vp += sprintf(vp, "et1macaddr=%s", eabuf);
++	vp++;
 +
-+config CPU_SB1_PASS_2_112x
-+	bool "112x Hybrid"
-+	depends on SIBYTE_BCM112X
-+	select CPU_SB1_PASS_2
++	/*
++	 * Enet phy settings one or two singles or a dual
++	 * Bits 4-0 : MII address for enet0 (0x1f for not there)
++	 * Bits 9-5 : MII address for enet1 (0x1f for not there)
++	 * Bit 14   : Mdio for enet0
++	 * Bit 15   : Mdio for enet1
++	 */
++	w = b[woff];
++	vp += sprintf(vp, "et0phyaddr=%d", (w & 0x1f));
++	vp++;
++	vp += sprintf(vp, "et1phyaddr=%d", ((w >> 5) & 0x1f));
++	vp++;
++	vp += sprintf(vp, "et0mdcport=%d", ((w >> 14) & 0x1));
++	vp++;
++	vp += sprintf(vp, "et1mdcport=%d", ((w >> 15) & 0x1));
++	vp++;
 +
-+config CPU_SB1_PASS_3
-+	bool "112x An"
-+	depends on SIBYTE_BCM112X
-+	select CPU_HAS_PREFETCH
++	/* Word 46 has board rev, antennas 0/1 & Country code/control */
++	w = b[46];
++	vp += sprintf(vp, "boardrev=%d", w & 0xff);
++	vp++;
 +
-+endchoice
++	if (sromrev > 1)
++		vp += sprintf(vp, "cctl=%d", (w >> 8) & 0xf);
++	else
++		vp += sprintf(vp, "cc=%d", (w >> 8) & 0xf);
++	vp++;
 +
-+config CPU_SB1_PASS_2
-+	bool
++	vp += sprintf(vp, "aa0=%d", (w >> 12) & 0x3);
++	vp++;
 +
-+config SIBYTE_HAS_LDT
-+	bool
-+	depends on PCI && (SIBYTE_SB1250 || SIBYTE_BCM1125H)
-+	default y
++	vp += sprintf(vp, "aa1=%d", (w >> 14) & 0x3);
++	vp++;
 +
-+config SIMULATION
-+	bool "Running under simulation"
-+	depends on SIBYTE_SB1xxx_SOC
-+	help
-+	  Build a kernel suitable for running under the GDB simulator.
-+	  Primarily adjusts the kernel's notion of time.
++	/* Words 47-49 set the (wl) pa settings */
++	woff = 47;
 +
-+config SIBYTE_CFE
-+	bool "Booting from CFE"
-+	depends on SIBYTE_SB1xxx_SOC
-+	help
-+	  Make use of the CFE API for enumerating available memory,
-+	  controlling secondary CPUs, and possibly console output.
++	for (i = 0; i < 3; i++) {
++		vp += sprintf(vp, "pa0b%d=%d", i, b[woff+i]);
++		vp++;
++		vp += sprintf(vp, "pa1b%d=%d", i, b[woff+i+6]);
++		vp++;
++	}
 +
-+config SIBYTE_CFE_CONSOLE
-+	bool "Use firmware console"
-+	depends on SIBYTE_CFE
-+	help
-+	  Use the CFE API's console write routines during boot.  Other console
-+	  options (VT console, sb1250 duart console, etc.) should not be
-+	  configured.
-+
-+config SIBYTE_STANDALONE
-+	bool
-+	depends on SIBYTE_SB1xxx_SOC && !SIBYTE_CFE
-+	default y
-+
-+config SIBYTE_STANDALONE_RAM_SIZE
-+	int "Memory size (in megabytes)"
-+	depends on SIBYTE_STANDALONE
-+	default "32"
-+
-+config SIBYTE_BUS_WATCHER
-+	bool "Support for Bus Watcher statistics"
-+	depends on SIBYTE_SB1xxx_SOC
-+	help
-+	  Handle and keep statistics on the bus error interrupts (COR_ECC,
-+	  BAD_ECC, IO_BUS).
++	/*
++	 * Words 50-51 set the customer-configured wl led behavior.
++	 * 8 bits/gpio pin.  High bit:  activehi=0, activelo=1;
++	 * LED behavior values defined in wlioctl.h .
++	 */
++	w = b[50];
++	if ((w != 0) && (w != 0xffff)) {
++		/* gpio0 */
++		vp += sprintf(vp, "wl0gpio0=%d", (w & 0xff));
++		vp++;
 +
-+config SIBYTE_BW_TRACE
-+	bool "Capture bus trace before bus error"
-+	depends on SIBYTE_BUS_WATCHER
-+	help
-+	  Run a continuous bus trace, dumping the raw data as soon as
-+	  a ZBbus error is detected.  Cannot work if ZBbus profiling
-+	  is turned on, and also will interfere with JTAG-based trace
-+	  buffer activity.  Raw buffer data is dumped to console, and
-+	  must be processed off-line.
-+
-+config SIBYTE_SB1250_PROF
-+	bool "Support for SB1/SOC profiling - SB1/SCD perf counters"
-+	depends on SIBYTE_SB1xxx_SOC
-+
-+config SIBYTE_TBPROF
-+	bool "Support for ZBbus profiling"
-+	depends on SIBYTE_SB1xxx_SOC
-+
-+config SNI_RM200_PCI
-+	bool "Support for SNI RM200 PCI"
-+	select ARC
-+	select ARC32
-+	select BOOT_ELF32
-+	select DMA_NONCOHERENT
-+	select GENERIC_ISA_DMA
-+	select HAVE_STD_PC_SERIAL_PORT
-+	select HW_HAS_PCI
-+	select I8259
-+	select ISA
-+	help
-+	  The SNI RM200 PCI was a MIPS-based platform manufactured by Siemens
-+	  Nixdorf Informationssysteme (SNI), parent company of Pyramid
-+	  Technology and now in turn merged with Fujitsu.  Say Y here to
-+	  support this machine type.
-+
-+config TOSHIBA_RBTX4927
-+	bool "Support for Toshiba TBTX49[23]7 board"
-+	depends on MIPS32
-+	select DMA_NONCOHERENT
-+	select HAS_TXX9_SERIAL
-+	select HW_HAS_PCI
-+	select I8259
-+	select ISA
-+	select SWAP_IO_SPACE
-+	help
-+	  This Toshiba board is based on the TX4927 processor. Say Y here to
-+	  support this machine type
++		/* gpio1 */
++		vp += sprintf(vp, "wl0gpio1=%d", (w >> 8) & 0xff);
++		vp++;
++	}
++	w = b[51];
++	if ((w != 0) && (w != 0xffff)) {
++		/* gpio2 */
++		vp += sprintf(vp, "wl0gpio2=%d", w & 0xff);
++		vp++;
 +
-+config TOSHIBA_FPCIB0
-+	bool "FPCIB0 Backplane Support"
-+	depends on TOSHIBA_RBTX4927
++		/* gpio3 */
++		vp += sprintf(vp, "wl0gpio3=%d", (w >> 8) & 0xff);
++		vp++;
++	}
++	
++	/* Word 52 is max power 0/1 */
++	w = b[52];
++	vp += sprintf(vp, "pa0maxpwr=%d", w & 0xff);
++	vp++;
++	vp += sprintf(vp, "pa1maxpwr=%d", (w >> 8) & 0xff);
++	vp++;
 +
-+config RWSEM_GENERIC_SPINLOCK
-+	bool
-+	default y
++	/* Word 56 is idle tssi target 0/1 */
++	w = b[56];
++	vp += sprintf(vp, "pa0itssit=%d", w & 0xff);
++	vp++;
++	vp += sprintf(vp, "pa1itssit=%d", (w >> 8) & 0xff);
++	vp++;
 +
-+config RWSEM_XCHGADD_ALGORITHM
-+	bool
++	/* Word 57 is boardflags, if not programmed make it zero */
++	w = b[57];
++	if (w == 0xffff) w = 0;
++	vp += sprintf(vp, "boardflags=%d", w);
++	vp++;
 +
-+config GENERIC_CALIBRATE_DELAY
-+	bool
-+	default y
++	/* Word 58 is antenna gain 0/1 */
++	w = b[58];
++	vp += sprintf(vp, "ag0=%d", w & 0xff);
++	vp++;
 +
-+config HAVE_DEC_LOCK
-+	bool
-+	default y
++	vp += sprintf(vp, "ag1=%d", (w >> 8) & 0xff);
++	vp++;
 +
-+#
-+# Select some configuration options automatically based on user selections.
-+#
-+config ARC
-+	bool
-+	depends on SNI_RM200_PCI || SGI_IP32 || SGI_IP27 || SGI_IP22 || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61
-+	default y
-+
-+config	DMA_COHERENT
-+	bool
-+
-+config	DMA_IP27
-+	bool
-+
-+config	DMA_NONCOHERENT
-+	bool
-+
-+config EARLY_PRINTK
-+	bool
-+	depends on MACH_DECSTATION
-+	default y
-+
-+config GENERIC_ISA_DMA
-+	bool
-+	depends on SNI_RM200_PCI || MIPS_MAGNUM_4000 || OLIVETTI_M700 || ACER_PICA_61 || MIPS_MALTA
-+	default y
-+
-+config I8259
-+	bool
-+	depends on SNI_RM200_PCI || DDB5477 || DDB5476 || DDB5074 || MACH_JAZZ || MIPS_MALTA || MIPS_COBALT
-+	default y
-+
-+config LIMITED_DMA
-+	bool
-+	select HIGHMEM
-+
-+config MIPS_BONITO64
-+	bool
-+	depends on MIPS_ATLAS || MIPS_MALTA
-+	default y
-+
-+config MIPS_MSC
-+	bool
-+	depends on MIPS_ATLAS || MIPS_MALTA
-+	default y
-+
-+config MIPS_NILE4
-+	bool
-+	depends on LASAT
-+	default y
-+
-+config MIPS_DISABLE_OBSOLETE_IDE
-+	bool
-+
-+config CPU_LITTLE_ENDIAN
-+	bool "Generate little endian code"
-+	default y if ACER_PICA_61 || CASIO_E55 || DDB5074 || DDB5476 || DDB5477 || MACH_DECSTATION || IBM_WORKPAD || LASAT || MIPS_COBALT || MIPS_ITE8172 || MIPS_IVR || SOC_AU1X00 || NEC_OSPREY || OLIVETTI_M700 || SNI_RM200_PCI || VICTOR_MPC30X || ZAO_CAPCELLA
-+	default n if MIPS_EV64120 || MIPS_EV96100 || MOMENCO_OCELOT || MOMENCO_OCELOT_G || SGI_IP22 || SGI_IP27 || SGI_IP32 || TOSHIBA_JMR3927
-+	help
-+	  Some MIPS machines can be configured for either little or big endian
-+	  byte order. These modes require different kernels. Say Y if your
-+	  machine is little endian, N if it's a big endian machine.
++	if (sromrev == 1) {
++		/* set the oem string */
++		vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x",
++			      ((b[59] >> 8) & 0xff), (b[59] & 0xff),
++			      ((b[60] >> 8) & 0xff), (b[60] & 0xff),
++			      ((b[61] >> 8) & 0xff), (b[61] & 0xff),
++			      ((b[62] >> 8) & 0xff), (b[62] & 0xff));
++		vp++;
++	}
 +
-+config IRQ_CPU
-+	bool
++	/* final nullbyte terminator */
++	*vp++ = '\0';
 +
-+config IRQ_CPU_RM7K
-+	bool
++	c = vp - base;
++	ASSERT(c <= VARS_MAX);
 +
-+config IRQ_MV64340
-+	bool
++	if (c == VARS_MAX) {
++		*vars = base;
++	} else {
++		vp = MALLOC(c);
++		ASSERT(vp);
++		bcopy(base, vp, c);
++		MFREE(base, VARS_MAX);
++		*vars = vp;
++	}
++	*count = c;
 +
-+config DDB5XXX_COMMON
-+	bool
-+	depends on DDB5074 || DDB5476 || DDB5477
-+	default y
++	return (0);
++}
 +
-+config MIPS_BOARDS_GEN
-+	bool
-+	depends on MIPS_ATLAS || MIPS_MALTA || MIPS_SEAD
-+	default y
++/*
++ * Read the cis and call parsecis to initialize the vars.
++ * Return 0 on success, nonzero on error.
++ */
++static int
++initvars_cis_pcmcia(void *osh, char **vars, int *count)
++{
++	uint8 *cis = NULL;
++	int rc;
 +
-+config MIPS_GT64111
-+	bool
-+	depends on MIPS_COBALT
-+	default y
++	if ((cis = MALLOC(CIS_SIZE)) == NULL)
++		return (-1);
 +
-+config MIPS_GT64120
-+	bool
-+	depends on MIPS_EV64120 || MIPS_EV96100 || LASAT || MIPS_ATLAS || MIPS_MALTA || MOMENCO_OCELOT
-+	default y
++	OSL_PCMCIA_READ_ATTR(osh, 0, cis, CIS_SIZE);
 +
-+config MIPS_TX3927
-+	bool
-+	depends on TOSHIBA_JMR3927
-+	select HAS_TXX9_SERIAL
-+	default y
++	rc = srom_parsecis(cis, vars, count);
 +
-+config PCI_MARVELL
-+	bool
++	MFREE(cis, CIS_SIZE);
 +
-+config ITE_BOARD_GEN
-+	bool
-+	depends on MIPS_IVR || MIPS_ITE8172
-+	default y
++	return (rc);
++}
 +
-+config SWAP_IO_SPACE
-+	bool
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmutils.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmutils.c
+--- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmutils.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmutils.c	2005-09-16 10:29:18.164593464 +0200
+@@ -0,0 +1,691 @@
++/*
++ * Misc useful OS-independent routines.
++ *
++ * Copyright 2001-2003, Broadcom Corporation   
++ * All Rights Reserved.   
++ *    
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
++ * $Id: bcmutils.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
++ */
 +
-+#
-+# Unfortunately not all GT64120 systems run the chip at the same clock.
-+# As the user for the clock rate and try to minimize the available options.
-+#
-+choice
-+	prompt "Galileo Chip Clock"
-+	#default SYSCLK_83 if MIPS_EV64120
-+	depends on MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
-+	default SYSCLK_83 if MIPS_EV64120
-+	default SYSCLK_100 if MOMENCO_OCELOT || MOMENCO_OCELOT_G
++#include <typedefs.h>
++#include <osl.h>
++#include <bcmutils.h>
++#include <bcmendian.h>
++#include <bcmnvram.h>
 +
-+config SYSCLK_75
-+	bool "75" if MIPS_EV64120
++unsigned char bcm_ctype[] = {
++	_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,			/* 0-7 */
++	_BCM_C,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C,_BCM_C,		/* 8-15 */
++	_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,			/* 16-23 */
++	_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,			/* 24-31 */
++	_BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,			/* 32-39 */
++	_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,			/* 40-47 */
++	_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,			/* 48-55 */
++	_BCM_D,_BCM_D,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,			/* 56-63 */
++	_BCM_P,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U,	/* 64-71 */
++	_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,			/* 72-79 */
++	_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,			/* 80-87 */
++	_BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,			/* 88-95 */
++	_BCM_P,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L,	/* 96-103 */
++	_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,			/* 104-111 */
++	_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,			/* 112-119 */
++	_BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_C,			/* 120-127 */
++	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,		/* 128-143 */
++	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,		/* 144-159 */
++	_BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,   /* 160-175 */
++	_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,       /* 176-191 */
++	_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,       /* 192-207 */
++	_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_L,       /* 208-223 */
++	_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,       /* 224-239 */
++	_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L        /* 240-255 */
++};
 +
-+config SYSCLK_83
-+	bool "83.3" if MIPS_EV64120
++uchar
++bcm_toupper(uchar c)
++{
++	if (bcm_islower(c))
++		c -= 'a'-'A';
++	return (c);
++}
 +
-+config SYSCLK_100
-+	bool "100" if MIPS_EV64120 || MOMENCO_OCELOT || MOMENCO_OCELOT_G
++ulong
++bcm_strtoul(char *cp, char **endp, uint base)
++{
++	ulong result, value;
++	bool minus;
++	
++	minus = FALSE;
 +
-+endchoice
++	while (bcm_isspace(*cp))
++		cp++;
++	
++	if (cp[0] == '+')
++		cp++;
++	else if (cp[0] == '-') {
++		minus = TRUE;
++		cp++;
++	}
++	
++	if (base == 0) {
++		if (cp[0] == '0') {
++			if ((cp[1] == 'x') || (cp[1] == 'X')) {
++				base = 16;
++				cp = &cp[2];
++			} else {
++				base = 8;
++				cp = &cp[1];
++			}
++		} else
++			base = 10;
++	} else if (base == 16 && (cp[0] == '0') && ((cp[1] == 'x') || (cp[1] == 'X'))) {
++		cp = &cp[2];
++	}
++		   
++	result = 0;
 +
-+config AU1X00_USB_DEVICE
-+	bool
-+	depends on MIPS_PB1500 || MIPS_PB1100 || MIPS_PB1000
-+	default n
++	while (bcm_isxdigit(*cp) &&
++	       (value = bcm_isdigit(*cp) ? *cp-'0' : bcm_toupper(*cp)-'A'+10) < base) {
++		result = result*base + value;
++		cp++;
++	}
 +
-+config MIPS_GT96100
-+	bool
-+	depends on MIPS_EV96100
-+	default y
-+	help
-+	  Say Y here to support the Galileo Technology GT96100 communications
-+	  controller card.  There is a web page at <http://www.galileot.com/>.
-+
-+config IT8172_CIR
-+	bool
-+	depends on MIPS_ITE8172 || MIPS_IVR
-+	default y
-+
-+config IT8712
-+	bool
-+	depends on MIPS_ITE8172
-+	default y
-+
-+config BOOT_ELF32
-+	bool
-+	depends on MACH_DECSTATION || MIPS_ATLAS || MIPS_MALTA || MOMENCO_JAGUAR_ATX || MOMENCO_OCELOT_3 || SIBYTE_SB1xxx_SOC || SGI_IP32 || SGI_IP22 || SNI_RM200_PCI
-+	default y
-+
-+config MIPS_L1_CACHE_SHIFT
-+	int
-+	default "4" if MACH_DECSTATION
-+	default "7" if SGI_IP27
-+	default "5"
-+
-+config ARC32
-+	bool
-+	depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
-+	default y
-+
-+config FB
-+	bool
-+	depends on MIPS_MAGNUM_4000 || OLIVETTI_M700
-+	default y
-+	---help---
-+	  The frame buffer device provides an abstraction for the graphics
-+	  hardware. It represents the frame buffer of some video hardware and
-+	  allows application software to access the graphics hardware through
-+	  a well-defined interface, so the software doesn't need to know
-+	  anything about the low-level (hardware register) stuff.
-+
-+	  Frame buffer devices work identically across the different
-+	  architectures supported by Linux and make the implementation of
-+	  application programs easier and more portable; at this point, an X
-+	  server exists which uses the frame buffer device exclusively.
-+	  On several non-X86 architectures, the frame buffer device is the
-+	  only way to use the graphics hardware.
-+
-+	  The device is accessed through special device nodes, usually located
-+	  in the /dev directory, i.e. /dev/fb*.
-+
-+	  You need an utility program called fbset to make full use of frame
-+	  buffer devices. Please read <file:Documentation/fb/framebuffer.txt>
-+	  and the Framebuffer-HOWTO at <http://www.tldp.org/docs.html#howto>
-+	  for more information.
-+
-+	  Say Y here and to the driver for your graphics board below if you
-+	  are compiling a kernel for a non-x86 architecture.
-+
-+	  If you are compiling for the x86 architecture, you can say Y if you
-+	  want to play with it, but it is not essential. Please note that
-+	  running graphical applications that directly touch the hardware
-+	  (e.g. an accelerated X server) and that are not frame buffer
-+	  device-aware may cause unexpected results. If unsure, say N.
-+
-+config HAVE_STD_PC_SERIAL_PORT
-+	bool
-+
-+config VR4181
-+	bool
-+	depends on NEC_OSPREY
-+	default y
-+
-+config ARC_CONSOLE
-+	bool "ARC console support"
-+	depends on SGI_IP22 || SNI_RM200_PCI
-+
-+config ARC_MEMORY
-+	bool
-+	depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP32
-+	default y
-+
-+config ARC_PROMLIB
-+	bool
-+	depends on MACH_JAZZ || SNI_RM200_PCI || SGI_IP22 || SGI_IP32
-+	default y
-+
-+config ARC64
-+	bool
-+	depends on SGI_IP27
-+	default y
-+
-+config BOOT_ELF64
-+	bool
-+	depends on SGI_IP27
-+	default y
-+
-+#config MAPPED_PCI_IO y
-+#	bool
-+#	depends on SGI_IP27
-+#	default y
-+
-+config QL_ISP_A64
-+	bool
-+	depends on SGI_IP27
-+	default y
-+
-+config TOSHIBA_BOARDS
-+	bool
-+	depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927
-+	default y
-+
-+endmenu
-+
-+menu "CPU selection"
-+
-+choice
-+	prompt "CPU type"
-+	default CPU_R4X00
-+
-+config CPU_MIPS32
-+	bool "MIPS32"
-+
-+config CPU_MIPS64
-+	bool "MIPS64"
-+
-+config CPU_R3000
-+	bool "R3000"
-+	depends on MIPS32
-+	help
-+	  Please make sure to pick the right CPU type. Linux/MIPS is not
-+	  designed to be generic, i.e. Kernels compiled for R3000 CPUs will
-+	  *not* work on R4000 machines and vice versa.  However, since most
-+	  of the supported machines have an R4000 (or similar) CPU, R4x00
-+	  might be a safe bet.  If the resulting kernel does not work,
-+	  try to recompile with R3000.
-+
-+config CPU_TX39XX
-+	bool "R39XX"
-+	depends on MIPS32
-+
-+config CPU_VR41XX
-+	bool "R41xx"
-+	help
-+	  The options selects support for the NEC VR41xx series of processors.
-+	  Only choose this option if you have one of these processors as a
-+	  kernel built with this option will not run on any other type of
-+	  processor or vice versa.
++	if (minus)
++		result = (ulong)(result * -1);
 +
-+config CPU_R4300
-+	bool "R4300"
-+	help
-+	  MIPS Technologies R4300-series processors.
++	if (endp)
++		*endp = (char *)cp;
 +
-+config CPU_R4X00
-+	bool "R4x00"
-+	help
-+	  MIPS Technologies R4000-series processors other than 4300, including
-+	  the R4000, R4400, R4600, and 4700.
++	return (result);
++}
 +
-+config CPU_TX49XX
-+	bool "R49XX"
++uint
++bcm_atoi(char *s)
++{
++	uint n;
 +
-+config CPU_R5000
-+	bool "R5000"
-+	help
-+	  MIPS Technologies R5000-series processors other than the Nevada.
++	n = 0;
 +
-+config CPU_R5432
-+	bool "R5432"
++	while (bcm_isdigit(*s))
++		n = (n * 10) + *s++ - '0';
++	return (n);
++}
 +
-+config CPU_R6000
-+	bool "R6000"
-+	depends on MIPS32 && EXPERIMENTAL
-+	help
-+	  MIPS Technologies R6000 and R6000A series processors.  Note these
-+	  processors are extremly rare and the support for them is incomplete.
++void
++deadbeef(char *p, uint len)
++{
++	static uchar meat[] = { 0xde, 0xad, 0xbe, 0xef };
 +
-+config CPU_NEVADA
-+	bool "RM52xx"
-+	help
-+	  QED / PMC-Sierra RM52xx-series ("Nevada") processors.
++	while (len-- > 0) {
++		*p = meat[((uint)p) & 3];
++		p++;
++	}
++}
 +
-+config CPU_R8000
-+	bool "R8000"
-+	depends on MIPS64 && EXPERIMENTAL
-+	help
-+	  MIPS Technologies R8000 processors.  Note these processors are
-+	  uncommon and the support for them is incomplete.
++/* pretty hex print a contiguous buffer */
++void
++prhex(char *msg, uchar *buf, uint nbytes)
++{
++	char line[256];
++	char* p;
++	uint i;
 +
-+config CPU_R10000
-+	bool "R10000"
-+	help
-+	  MIPS Technologies R10000-series processors.
++	if (msg && (msg[0] != '\0'))
++		printf("%s: ", msg);
 +
-+config CPU_RM7000
-+	bool "RM7000"
++	p = line;
++	for (i = 0; i < nbytes; i++) {
++		if (i % 16 == 0) {
++			p += sprintf(p, "%04d: ", i);	/* line prefix */
++		}
++		p += sprintf(p, "%02x ", buf[i]);
++		if (i % 16 == 15) {
++			printf("%s\n", line);		/* flush line */
++			p = line;
++		}
++	}
 +
-+config CPU_RM9000
-+	bool "RM9000"
++	/* flush last partial line */
++	if (p != line)
++		printf("%s\n", line);
++}
 +
-+config CPU_SB1
-+	bool "SB1"
++/* pretty hex print a pkt buffer chain */
++void
++prpkt(char *msg, void *drv, void *p0)
++{
++	void *p;
 +
-+endchoice
++	if (msg && (msg[0] != '\0'))
++		printf("%s: ", msg);
 +
-+choice
-+	prompt "Kernel page size"
-+	default PAGE_SIZE_4KB
++	for (p = p0; p; p = PKTNEXT(drv, p))
++		prhex(NULL, PKTDATA(drv, p), PKTLEN(drv, p));
++}
 +
-+config PAGE_SIZE_4KB
-+	bool "4kB"
-+	help
-+	 This option select the standard 4kB Linux page size.  On some
-+	 R3000-family processors this is the only available page size.  Using
-+	 4kB page size will minimize memory consumption and is therefore
-+	 recommended for low memory systems.
-+
-+config PAGE_SIZE_8KB
-+	bool "8kB"
-+	depends on EXPERIMENTAL && CPU_R8000
-+	help
-+	  Using 8kB page size will result in higher performance kernel at
-+	  the price of higher memory consumption.  This option is available
-+	  only on the R8000 processor.  Not that at the time of this writing
-+	  this option is still high experimental; there are also issues with
-+	  compatibility of user applications.
-+
-+config PAGE_SIZE_16KB
-+	bool "16kB"
-+	depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
-+	help
-+	  Using 16kB page size will result in higher performance kernel at
-+	  the price of higher memory consumption.  This option is available on
-+	  all non-R3000 family processor.  Not that at the time of this
-+	  writing this option is still high experimental; there are also
-+	  issues with compatibility of user applications.
-+
-+config PAGE_SIZE_64KB
-+	bool "64kB"
-+	depends on EXPERIMENTAL && !CPU_R3000 && !CPU_TX39XX
-+	help
-+	  Using 64kB page size will result in higher performance kernel at
-+	  the price of higher memory consumption.  This option is available on
-+	  all non-R3000 family processor.  Not that at the time of this
-+	  writing this option is still high experimental; there are also
-+	  issues with compatibility of user applications.
++/* copy a pkt buffer chain into a buffer */
++uint
++pktcopy(void *drv, void *p, uint offset, int len, uchar *buf)
++{
++	uint n, ret = 0;
 +
-+endchoice
++	if (len < 0)
++		len = 4096;	/* "infinite" */
 +
-+config BOARD_SCACHE
-+	bool
++	/* skip 'offset' bytes */
++	for (; p && offset; p = PKTNEXT(drv, p)) {
++		if (offset < (uint)PKTLEN(drv, p))
++			break;
++		offset -= PKTLEN(drv, p);
++	}
 +
-+config IP22_CPU_SCACHE
-+	bool
-+	select BOARD_SCACHE
++	if (!p)
++		return 0;
 +
-+config R5000_CPU_SCACHE
-+	bool
-+	select BOARD_SCACHE
++	/* copy the data */
++	for (; p && len; p = PKTNEXT(drv, p)) {
++		n = MIN((uint)PKTLEN(drv, p) - offset, (uint)len);
++		bcopy(PKTDATA(drv, p) + offset, buf, n);
++		buf += n;
++		len -= n;
++		ret += n;
++		offset = 0;
++	}
 +
-+config RM7000_CPU_SCACHE
-+	bool
-+	select BOARD_SCACHE
++	return ret;
++}
 +
-+config SIBYTE_DMA_PAGEOPS
-+	bool "Use DMA to clear/copy pages"
-+	depends on CPU_SB1
-+	help
-+	  Instead of using the CPU to zero and copy pages, use a Data Mover
-+	  channel.  These DMA channels are otherwise unused by the standard
-+	  SiByte Linux port.  Seems to give a small performance benefit.
-+
-+config CPU_HAS_PREFETCH
-+	bool "Enable prefetches" if CPU_SB1 && !CPU_SB1_PASS_2
-+	default y if CPU_MIPS32 || CPU_MIPS64 || CPU_RM7000 || CPU_RM9000 || CPU_R10000
-+
-+config VTAG_ICACHE
-+	bool "Support for Virtual Tagged I-cache" if CPU_MIPS64 || CPU_MIPS32
-+	default y if CPU_SB1
-+
-+config SB1_PASS_1_WORKAROUNDS
-+	bool
-+	depends on CPU_SB1_PASS_1
-+	default y
-+
-+config SB1_PASS_2_WORKAROUNDS
-+	bool
-+	depends on CPU_SB1 && (CPU_SB1_PASS_2_2 || CPU_SB1_PASS_2)
-+	default y
-+
-+config SB1_PASS_2_1_WORKAROUNDS
-+	bool
-+	depends on CPU_SB1 && CPU_SB1_PASS_2
-+	default y
-+
-+config 64BIT_PHYS_ADDR
-+	bool "Support for 64-bit physical address space"
-+	depends on (CPU_R4X00 || CPU_R5000 || CPU_RM7000 || CPU_RM9000 || CPU_R10000 || CPU_SB1 || CPU_MIPS32 || CPU_MIPS64) && MIPS32
-+
-+config CPU_ADVANCED
-+	bool "Override CPU Options"
-+	depends on MIPS32
-+	help
-+	  Saying yes here allows you to select support for various features
-+	  your CPU may or may not have.  Most people should say N here.
++/* return total length of buffer chain */
++uint
++pkttotlen(void *drv, void *p)
++{
++	uint total;
 +
-+config CPU_HAS_LLSC
-+	bool "ll/sc Instructions available" if CPU_ADVANCED
-+	default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX
-+	help
-+	  MIPS R4000 series and later provide the Load Linked (ll)
-+	  and Store Conditional (sc) instructions. More information is
-+	  available at <http://www.go-ecs.com/mips/miptek1.htm>.
++	total = 0;
++	for (; p; p = PKTNEXT(drv, p))
++		total += PKTLEN(drv, p);
++	return (total);
++}
 +
-+	  Say Y here if your CPU has the ll and sc instructions.  Say Y here
-+	  for better performance, N if you don't know.  You must say Y here
-+	  for multiprocessor machines.
 +
-+config CPU_HAS_LLDSCD
-+	bool "lld/scd Instructions available" if CPU_ADVANCED
-+	default y if !CPU_ADVANCED && !CPU_R3000 && !CPU_VR41XX && !CPU_TX39XX && !CPU_MIPS32
-+	help
-+	  Say Y here if your CPU has the lld and scd instructions, the 64-bit
-+	  equivalents of ll and sc.  Say Y here for better performance, N if
-+	  you don't know.  You must say Y here for multiprocessor machines.
++uchar*
++bcm_ether_ntoa(char *ea, char *buf)
++{
++	sprintf(buf,"%02x:%02x:%02x:%02x:%02x:%02x",
++		(uchar)ea[0]&0xff, (uchar)ea[1]&0xff, (uchar)ea[2]&0xff,
++		(uchar)ea[3]&0xff, (uchar)ea[4]&0xff, (uchar)ea[5]&0xff);
++	return (buf);
++}
 +
-+config CPU_HAS_WB
-+	bool "Writeback Buffer available" if CPU_ADVANCED
-+	default y if !CPU_ADVANCED && CPU_R3000 && MACH_DECSTATION
-+	help
-+	  Say N here for slightly better performance.  You must say Y here for
-+	  machines which require flushing of write buffers in software.  Saying
-+	  Y is the safe option; N may result in kernel malfunction and crashes.
++/* parse a xx:xx:xx:xx:xx:xx format ethernet address */
++int
++bcm_ether_atoe(char *p, char *ea)
++{
++	int i = 0;
 +
-+config CPU_HAS_SYNC
-+	bool
-+	depends on !CPU_R3000
-+	default y
++	for (;;) {
++		ea[i++] = (char) bcm_strtoul(p, &p, 16);
++		if (!*p++ || i == 6)
++			break;
++	}
 +
-+#
-+# - Highmem only makes sense for the 32-bit kernel.
-+# - The current highmem code will only work properly on physically indexed
-+#   caches such as R3000, SB1, R7000 or those that look like they're virtually
-+#   indexed such as R4000/R4400 SC and MC versions or R10000.  So for the
-+#   moment we protect the user and offer the highmem option only on machines
-+#   where it's known to be safe.  This will not offer highmem on a few systems
-+#   such as MIPS32 and MIPS64 CPUs which may have virtual and physically
-+#   indexed CPUs but we're playing safe.
-+# - We should not offer highmem for system of which we already know that they
-+#   don't have memory configurations that could gain from highmem support in
-+#   the kernel because they don't support configurations with RAM at physical
-+#   addresses > 0x20000000.
-+#
-+config HIGHMEM
-+	bool "High Memory Support"
-+	depends on MIPS32 && (CPU_R3000 || CPU_SB1 || CPU_R7000 || CPU_RM9000 || CPU_R10000) && !(MACH_DECSTATION || MOMENCO_JAGUAR_ATX)
-+
-+config SMP
-+	bool "Multi-Processing support"
-+	depends on CPU_RM9000 || (SIBYTE_SB1250 && !SIBYTE_STANDALONE) || SGI_IP27
-+	---help---
-+	  This enables support for systems with more than one CPU. If you have
-+	  a system with only one CPU, like most personal computers, say N. If
-+	  you have a system with more than one CPU, say Y.
-+
-+	  If you say N here, the kernel will run on single and multiprocessor
-+	  machines, but will use only one CPU of a multiprocessor machine. If
-+	  you say Y here, the kernel will run on many, but not all,
-+	  singleprocessor machines. On a singleprocessor machine, the kernel
-+	  will run faster if you say N here.
-+
-+	  People using multiprocessor machines who say Y here should also say
-+	  Y to "Enhanced Real Time Clock Support", below.
-+
-+	  See also the <file:Documentation/smp.txt> and the SMP-HOWTO
-+	  available at <http://www.tldp.org/docs.html#howto>.
-+
-+	  If you don't know what to do here, say N.
-+
-+config NR_CPUS
-+	int "Maximum number of CPUs (2-64)"
-+	range 2 64
-+	depends on SMP
-+	default "64" if SGI_IP27
-+	default "2"
-+	help
-+	  This allows you to specify the maximum number of CPUs which this
-+	  kernel will support.  The maximum supported value is 32 for 32-bit
-+	  kernel and 64 for 64-bit kernels; the minimum value which makes
-+	  sense is 2.
++	return (i == 6);
++}
 +
-+	  This is purely to save memory - each supported CPU adds
-+	  approximately eight kilobytes to the kernel image.
++/* 
++ * Traverse a string of 1-byte tag/1-byte length/variable-length value 
++ * triples, returning a pointer to the substring whose first element 
++ * matches tag.  Stop parsing when we see an element whose ID is greater
++ * than the target key. 
++ */
++bcm_tlv_t *
++bcm_parse_ordered_tlvs(void *buf, int buflen, uint key)
++{
++	bcm_tlv_t *elt;
++	int totlen;
 +
-+config PREEMPT
-+	bool "Preemptible Kernel"
-+	help
-+	  This option reduces the latency of the kernel when reacting to
-+	  real-time or interactive events by allowing a low priority process to
-+	  be preempted even if it is in kernel mode executing a system call.
-+	  This allows applications to run more reliably even when the system is
-+	  under load.
-+
-+config RTC_DS1742
-+	bool "DS1742 BRAM/RTC support"
-+	depends on TOSHIBA_JMR3927 || TOSHIBA_RBTX4927
-+
-+config MIPS_INSANE_LARGE
-+	bool "Support for large 64-bit configurations"
-+	depends on CPU_R10000 && MIPS64
-+	help
-+	  MIPS R10000 does support a 44 bit / 16TB address space as opposed to
-+	  previous 64-bit processors which only supported 40 bit / 1TB. If you
-+	  need processes of more than 1TB virtual address space, say Y here.
-+	  This will result in additional memory usage, so it is not
-+	  recommended for normal users.
-+
-+config RWSEM_GENERIC_SPINLOCK
-+	bool
-+	default y
-+
-+endmenu
-+
-+menu "Bus options (PCI, PCMCIA, EISA, ISA, TC)"
-+
-+config HW_HAS_PCI
-+	bool
-+
-+config PCI
-+	bool "Support for PCI controller"
-+	depends on HW_HAS_PCI
-+	help
-+	  Find out whether you have a PCI motherboard. PCI is the name of a
-+	  bus system, i.e. the way the CPU talks to the other stuff inside
-+	  your box. Other bus systems are ISA, EISA, or VESA. If you have PCI,
-+	  say Y, otherwise N.
-+
-+	  The PCI-HOWTO, available from
-+	  <http://www.tldp.org/docs.html#howto>, contains valuable
-+	  information about which PCI hardware does work under Linux and which
-+	  doesn't.
-+
-+config PCI_DOMAINS
-+	bool
-+	depends on PCI
-+
-+source "drivers/pci/Kconfig"
-+
-+#
-+# ISA support is now enabled via select.  Too many systems still have the one
-+# or other ISA chip on the board that users don't know about so don't expect
-+# users to choose the right thing ...
-+#
-+config ISA
-+	bool
-+
-+config EISA
-+	bool "EISA support"
-+	depends on SGI_IP22 || SNI_RM200_PCI
-+	select ISA
-+	---help---
-+	  The Extended Industry Standard Architecture (EISA) bus was
-+	  developed as an open alternative to the IBM MicroChannel bus.
-+
-+	  The EISA bus provided some of the features of the IBM MicroChannel
-+	  bus while maintaining backward compatibility with cards made for
-+	  the older ISA bus.  The EISA bus saw limited use between 1988 and
-+	  1995 when it was made obsolete by the PCI bus.
-+
-+	  Say Y here if you are building a kernel for an EISA-based machine.
++	elt = (bcm_tlv_t*)buf;
++	totlen = buflen;
 +
-+	  Otherwise, say N.
++	/* find tagged parameter */
++	while (totlen >= 2) {
++		uint id = elt->id;
++		int len = elt->len;
++		
++		/* Punt if we start seeing IDs > than target key */
++		if (id > key)
++			return(NULL);
 +
-+source "drivers/eisa/Kconfig"
++		/* validate remaining totlen */
++		if ((id == key) && (totlen >= (len + 2)))
++			return (elt);
 +
-+config TC
-+	bool "TURBOchannel support"
-+	depends on MACH_DECSTATION
-+	help
-+	  TurboChannel is a DEC (now Compaq (now HP)) bus for Alpha and MIPS
-+	  processors.  Documentation on writing device drivers for TurboChannel
-+	  is available at:
-+	  <http://www.cs.arizona.edu/computer.help/policy/DIGITAL_unix/AA-PS3HD-TET1_html/TITLE.html>.
++		elt = (bcm_tlv_t*)((uint8*)elt + (len + 2));
++		totlen -= (len + 2);
++	}
++	return NULL;
++}
 +
-+#config ACCESSBUS
-+#	bool "Access.Bus support"
-+#	depends on TC
 +
-+config MMU
-+	bool
-+	default y
++/* 
++ * Traverse a string of 1-byte tag/1-byte length/variable-length value 
++ * triples, returning a pointer to the substring whose first element 
++ * matches tag
++ */
++bcm_tlv_t *
++bcm_parse_tlvs(void *buf, int buflen, uint key)
++{
++	bcm_tlv_t *elt;
++	int totlen;
 +
-+config MCA
-+	bool
++	elt = (bcm_tlv_t*)buf;
++	totlen = buflen;
 +
-+config SBUS
-+	bool
++	/* find tagged parameter */
++	while (totlen >= 2) {
++		int len = elt->len;
 +
-+source "drivers/pcmcia/Kconfig"
++		/* validate remaining totlen */
++		if ((elt->id == key) && (totlen >= (len + 2)))
++			return (elt);
 +
-+source "drivers/pci/hotplug/Kconfig"
++		elt = (bcm_tlv_t*)((uint8*)elt + (len + 2));
++		totlen -= (len + 2);
++	}
++	
++	return NULL;
++}
 +
-+endmenu
++void
++pktqinit(struct pktq *q, int maxlen)
++{
++	q->head = q->tail = NULL;
++	q->maxlen = maxlen;
++	q->len = 0;
++}
 +
-+menu "Executable file formats"
++void
++pktenq(struct pktq *q, void *p, bool lifo)
++{
++	ASSERT(PKTLINK(p) == NULL);
 +
-+source "fs/Kconfig.binfmt"
++	PKTSETLINK(p, NULL);
 +
-+config TRAD_SIGNALS
-+	bool
-+	default y if MIPS32
++	if (q->tail == NULL) {
++		ASSERT(q->head == NULL);
++		q->head = q->tail = p;
++	}
++	else {
++		ASSERT(q->head);
++		ASSERT(PKTLINK(q->tail) == NULL);
++		if (lifo) {
++			PKTSETLINK(p, q->head);
++			q->head = p;
++		} else {
++			PKTSETLINK(q->tail, p);
++			q->tail = p;
++		}
++	}
++	q->len++;
++}
 +
-+config BUILD_ELF64
-+	bool "Use 64-bit ELF format for building"
-+	depends on MIPS64
-+	help
-+	  A 64-bit kernel is usually built using the 64-bit ELF binary object
-+	  format as it's one that allows arbitrary 64-bit constructs.  For
-+	  kernels that are loaded within the KSEG compatibility segments the
-+	  32-bit ELF format can optionally be used resulting in a somewhat
-+	  smaller binary, but this option is not explicitly supported by the
-+	  toolchain and since binutils 2.14 it does not even work at all.
++void*
++pktdeq(struct pktq *q)
++{
++	void *p;
 +
-+	  Say Y to use the 64-bit format or N to use the 32-bit one.
++	if ((p = q->head)) {
++		ASSERT(q->tail);
++		q->head = PKTLINK(p);
++		PKTSETLINK(p, NULL);
++		q->len--;
++		if (q->head == NULL)
++			q->tail = NULL;
++	}
++	else {
++		ASSERT(q->tail == NULL);
++	}
 +
-+	  If unsure say Y.
++	return (p);
++}
 +
-+config BINFMT_IRIX
-+	bool "Include IRIX binary compatibility"
-+	depends on !CPU_LITTLE_ENDIAN && MIPS32 && BROKEN
++/*******************************************************************************
++ * crc8
++ *
++ * Computes a crc8 over the input data using the polynomial:
++ *
++ *       x^8 + x^7 +x^6 + x^4 + x^2 + 1
++ *
++ * The caller provides the initial value (either CRC8_INIT_VALUE
++ * or the previous returned value) to allow for processing of 
++ * discontiguous blocks of data.  When generating the CRC the
++ * caller is responsible for complementing the final return value
++ * and inserting it into the byte stream.  When checking, a final
++ * return value of CRC8_GOOD_VALUE indicates a valid CRC.
++ *
++ * Reference: Dallas Semiconductor Application Note 27
++ *   Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms", 
++ *     ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
++ *     ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
++ *
++ ******************************************************************************/
 +
-+config MIPS32_COMPAT
-+	bool "Kernel support for Linux/MIPS 32-bit binary compatibility"
-+	depends on MIPS64
-+	help
-+	  Select this option if you want Linux/MIPS 32-bit binary
-+	  compatibility. Since all software available for Linux/MIPS is
-+	  currently 32-bit you should say Y here.
-+
-+config COMPAT
-+	bool
-+	depends on MIPS32_COMPAT
-+	default y
-+
-+config MIPS32_O32
-+	bool "Kernel support for o32 binaries"
-+	depends on MIPS32_COMPAT
-+	help
-+	  Select this option if you want to run o32 binaries.  These are pure
-+	  32-bit binaries as used by the 32-bit Linux/MIPS port.  Most of
-+	  existing binaries are in this format.
++static uint8 crc8_table[256] = {
++    0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B,
++    0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21,
++    0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF,
++    0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5,
++    0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14,
++    0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E,
++    0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80,
++    0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA,
++    0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95,
++    0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF,
++    0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01,
++    0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B,
++    0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA,
++    0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0,
++    0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E,
++    0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34,
++    0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0,
++    0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A,
++    0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54,
++    0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E,
++    0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF,
++    0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5,
++    0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B,
++    0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61,
++    0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E,
++    0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74,
++    0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA,
++    0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0,
++    0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41,
++    0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B,
++    0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5,
++    0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F
++};
 +
-+	  If unsure, say Y.
++/*
++ * Search the name=value vars for a specific one and return its value.
++ * Returns NULL if not found.
++ */
++char*
++getvar(char *vars, char *name)
++{
++	char *s;
++	int len;
 +
-+config MIPS32_N32
-+	bool "Kernel support for n32 binaries"
-+	depends on MIPS32_COMPAT
-+	help
-+	  Select this option if you want to run n32 binaries.  These are
-+	  64-bit binaries using 32-bit quantities for addressing and certain
-+	  data that would normally be 64-bit.  They are used in special
-+	  cases.
++	len = strlen(name);
 +
-+	  If unsure, say N.
++	/* first look in vars[] */
++	for (s = vars; s && *s; ) {
++		if ((bcmp(s, name, len) == 0) && (s[len] == '='))
++			return (&s[len+1]);
 +
-+config BINFMT_ELF32
-+	bool
-+	default y if MIPS32_O32 || MIPS32_N32
++		while (*s++)
++			;
++	}
 +
-+config PM
-+	bool "Power Management support (EXPERIMENTAL)"
-+	depends on EXPERIMENTAL && MACH_AU1X00
++	/* then query nvram */
++	return (nvram_get(name));
++}
 +
-+endmenu
++/*
++ * Search the vars for a specific one and return its value as
++ * an integer. Returns 0 if not found.
++ */
++int
++getintvar(char *vars, char *name)
++{
++	char *val;
 +
-+source "drivers/Kconfig"
++	if ((val = getvar(vars, name)) == NULL)
++		return (0);
 +
-+source "fs/Kconfig"
++	return (bcm_strtoul(val, NULL, 0));
++}
 +
-+source "arch/mips/Kconfig.debug"
++void
++bcm_mdelay(uint ms)
++{
++	uint i;
 +
-+source "security/Kconfig"
++	for (i = 0; i < ms; i++) {
++		OSL_DELAY(1000);
++	}
++}
 +
-+source "crypto/Kconfig"
++#define CRC_INNER_LOOP(n, c, x) \
++    (c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff]
 +
-+source "lib/Kconfig"
++uint8
++crc8(
++	uint8 *pdata,	/* pointer to array of data to process */
++	uint  nbytes,	/* number of input data bytes to process */
++	uint8 crc	/* either CRC8_INIT_VALUE or previous return value */
++)
++{
++	/* hard code the crc loop instead of using CRC_INNER_LOOP macro
++	 * to avoid the undefined and unnecessary (uint8 >> 8) operation. */
++	while (nbytes-- > 0)
++		crc = crc8_table[(crc ^ *pdata++) & 0xff];
 +
-+#
-+# Use the generic interrupt handling code in kernel/irq/:
-+#
-+config GENERIC_HARDIRQS
-+	bool
-+	default y
++	return crc;
++}
 +
-+config GENERIC_IRQ_PROBE
-+	bool
-+	default y
++/*******************************************************************************
++ * crc16
++ *
++ * Computes a crc16 over the input data using the polynomial:
++ *
++ *       x^16 + x^12 +x^5 + 1
++ *
++ * The caller provides the initial value (either CRC16_INIT_VALUE
++ * or the previous returned value) to allow for processing of 
++ * discontiguous blocks of data.  When generating the CRC the
++ * caller is responsible for complementing the final return value
++ * and inserting it into the byte stream.  When checking, a final
++ * return value of CRC16_GOOD_VALUE indicates a valid CRC.
++ *
++ * Reference: Dallas Semiconductor Application Note 27
++ *   Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms", 
++ *     ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
++ *     ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
++ *
++ ******************************************************************************/
 +
-+config ISA_DMA_API
-+	bool
-+	default y
-diff -Nur linux-2.6.12.5/arch/mips/Makefile linux-2.6.12.5-brcm/arch/mips/Makefile
---- linux-2.6.12.5/arch/mips/Makefile	2005-08-15 02:20:18.000000000 +0200
-+++ linux-2.6.12.5-brcm/arch/mips/Makefile	2005-08-28 16:39:59.077334424 +0200
-@@ -79,7 +79,7 @@
- cflags-y			+= -I $(TOPDIR)/include/asm/gcc
- cflags-y			+= -G 0 -mno-abicalls -fno-pic -pipe
- cflags-y			+= $(call cc-option, -finline-limit=100000)
--LDFLAGS_vmlinux			+= -G 0 -static -n
-+LDFLAGS_vmlinux			+= -G 0 -static -n -nostdlib
- MODFLAGS			+= -mlong-calls
- 
- cflags-$(CONFIG_SB1XXX_CORELIS)	+= -mno-sched-prolog -fno-omit-frame-pointer
-@@ -167,9 +167,10 @@
- 			$(call set_gccflags,r4600,mips3,r4600,mips3,mips2)  \
- 			-Wa,--trap
- 
--cflags-$(CONFIG_CPU_MIPS32)	+= \
--			$(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \
--			-Wa,--trap
-+#cflags-$(CONFIG_CPU_MIPS32)	+= \
-+#			$(call set_gccflags,mips32,mips32,r4600,mips3,mips2) \
-+#			-Wa,--trap
-+cflags-$(CONFIG_CPU_MIPS32)	+= -mips2 -Wa,--trap
- 
- cflags-$(CONFIG_CPU_MIPS64)	+= \
- 			$(call set_gccflags,mips64,mips64,r4600,mips3,mips2) \
-@@ -618,6 +619,14 @@
- load-$(CONFIG_SIBYTE_SWARM)	:= 0xffffffff80100000
- 
- #
-+# Broadcom BCM47XX boards
-+#
-+core-$(CONFIG_BCM947XX)		+= arch/mips/bcm947xx/ arch/mips/bcm947xx/broadcom/
-+cflags-$(CONFIG_BCM947XX)	+= -Iarch/mips/bcm947xx/include
-+load-$(CONFIG_BCM947XX)		:= 0xffffffff80001000
++static uint16 crc16_table[256] = {
++    0x0000, 0x1189, 0x2312, 0x329B, 0x4624, 0x57AD, 0x6536, 0x74BF,
++    0x8C48, 0x9DC1, 0xAF5A, 0xBED3, 0xCA6C, 0xDBE5, 0xE97E, 0xF8F7,
++    0x1081, 0x0108, 0x3393, 0x221A, 0x56A5, 0x472C, 0x75B7, 0x643E,
++    0x9CC9, 0x8D40, 0xBFDB, 0xAE52, 0xDAED, 0xCB64, 0xF9FF, 0xE876,
++    0x2102, 0x308B, 0x0210, 0x1399, 0x6726, 0x76AF, 0x4434, 0x55BD,
++    0xAD4A, 0xBCC3, 0x8E58, 0x9FD1, 0xEB6E, 0xFAE7, 0xC87C, 0xD9F5,
++    0x3183, 0x200A, 0x1291, 0x0318, 0x77A7, 0x662E, 0x54B5, 0x453C,
++    0xBDCB, 0xAC42, 0x9ED9, 0x8F50, 0xFBEF, 0xEA66, 0xD8FD, 0xC974,
++    0x4204, 0x538D, 0x6116, 0x709F, 0x0420, 0x15A9, 0x2732, 0x36BB,
++    0xCE4C, 0xDFC5, 0xED5E, 0xFCD7, 0x8868, 0x99E1, 0xAB7A, 0xBAF3,
++    0x5285, 0x430C, 0x7197, 0x601E, 0x14A1, 0x0528, 0x37B3, 0x263A,
++    0xDECD, 0xCF44, 0xFDDF, 0xEC56, 0x98E9, 0x8960, 0xBBFB, 0xAA72,
++    0x6306, 0x728F, 0x4014, 0x519D, 0x2522, 0x34AB, 0x0630, 0x17B9,
++    0xEF4E, 0xFEC7, 0xCC5C, 0xDDD5, 0xA96A, 0xB8E3, 0x8A78, 0x9BF1,
++    0x7387, 0x620E, 0x5095, 0x411C, 0x35A3, 0x242A, 0x16B1, 0x0738,
++    0xFFCF, 0xEE46, 0xDCDD, 0xCD54, 0xB9EB, 0xA862, 0x9AF9, 0x8B70,
++    0x8408, 0x9581, 0xA71A, 0xB693, 0xC22C, 0xD3A5, 0xE13E, 0xF0B7,
++    0x0840, 0x19C9, 0x2B52, 0x3ADB, 0x4E64, 0x5FED, 0x6D76, 0x7CFF,
++    0x9489, 0x8500, 0xB79B, 0xA612, 0xD2AD, 0xC324, 0xF1BF, 0xE036,
++    0x18C1, 0x0948, 0x3BD3, 0x2A5A, 0x5EE5, 0x4F6C, 0x7DF7, 0x6C7E,
++    0xA50A, 0xB483, 0x8618, 0x9791, 0xE32E, 0xF2A7, 0xC03C, 0xD1B5,
++    0x2942, 0x38CB, 0x0A50, 0x1BD9, 0x6F66, 0x7EEF, 0x4C74, 0x5DFD,
++    0xB58B, 0xA402, 0x9699, 0x8710, 0xF3AF, 0xE226, 0xD0BD, 0xC134,
++    0x39C3, 0x284A, 0x1AD1, 0x0B58, 0x7FE7, 0x6E6E, 0x5CF5, 0x4D7C,
++    0xC60C, 0xD785, 0xE51E, 0xF497, 0x8028, 0x91A1, 0xA33A, 0xB2B3,
++    0x4A44, 0x5BCD, 0x6956, 0x78DF, 0x0C60, 0x1DE9, 0x2F72, 0x3EFB,
++    0xD68D, 0xC704, 0xF59F, 0xE416, 0x90A9, 0x8120, 0xB3BB, 0xA232,
++    0x5AC5, 0x4B4C, 0x79D7, 0x685E, 0x1CE1, 0x0D68, 0x3FF3, 0x2E7A,
++    0xE70E, 0xF687, 0xC41C, 0xD595, 0xA12A, 0xB0A3, 0x8238, 0x93B1,
++    0x6B46, 0x7ACF, 0x4854, 0x59DD, 0x2D62, 0x3CEB, 0x0E70, 0x1FF9,
++    0xF78F, 0xE606, 0xD49D, 0xC514, 0xB1AB, 0xA022, 0x92B9, 0x8330,
++    0x7BC7, 0x6A4E, 0x58D5, 0x495C, 0x3DE3, 0x2C6A, 0x1EF1, 0x0F78
++};
 +
++uint16
++crc16(
++    uint8 *pdata,  /* pointer to array of data to process */
++    uint nbytes, /* number of input data bytes to process */
++    uint16 crc     /* either CRC16_INIT_VALUE or previous return value */
++)
++{
++    while (nbytes-- > 0)
++        CRC_INNER_LOOP(16, crc, *pdata++);
++    return crc;
++}
 +
-+#
- # SNI RM200 PCI
- #
- core-$(CONFIG_SNI_RM200_PCI)	+= arch/mips/sni/
-@@ -729,6 +738,7 @@
- archclean:
- 	@$(MAKE) $(clean)=arch/mips/boot
- 	@$(MAKE) $(clean)=arch/mips/lasat
-+	@$(MAKE) -C arch/mips/bcm47xx/compressed clean
- 
- # Generate <asm/offset.h 
- #
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/Makefile linux-2.6.12.5-brcm/arch/mips/bcm947xx/Makefile
---- linux-2.6.12.5/arch/mips/bcm947xx/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/Makefile	2005-08-28 11:12:20.406862800 +0200
-@@ -0,0 +1,6 @@
-+#
-+# Makefile for the BCM47xx specific kernel interface routines
-+# under Linux.
-+#
++static uint32 crc32_table[256] = {
++    0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,
++    0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
++    0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
++    0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
++    0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,
++    0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
++    0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,
++    0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
++    0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
++    0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
++    0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,
++    0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
++    0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,
++    0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
++    0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
++    0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
++    0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,
++    0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
++    0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,
++    0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
++    0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
++    0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
++    0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,
++    0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
++    0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,
++    0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
++    0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
++    0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
++    0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,
++    0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
++    0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,
++    0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
++    0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
++    0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
++    0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,
++    0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
++    0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,
++    0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
++    0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
++    0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
++    0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,
++    0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
++    0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,
++    0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
++    0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
++    0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
++    0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,
++    0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
++    0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,
++    0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
++    0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
++    0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
++    0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,
++    0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
++    0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,
++    0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
++    0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
++    0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
++    0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,
++    0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
++    0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,
++    0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
++    0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
++    0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
++};
 +
-+obj-y := irq.o int-handler.o prom.o setup.o time.o
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/Makefile linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/Makefile
---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/Makefile	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/Makefile	2005-08-28 11:12:20.407862648 +0200
-@@ -0,0 +1,6 @@
-+#
-+# Makefile for the BCM47xx specific kernel interface routines
-+# under Linux.
-+#
++uint32
++crc32(
++    uint8 *pdata,  /* pointer to array of data to process */
++    uint   nbytes, /* number of input data bytes to process */
++    uint32 crc     /* either CRC32_INIT_VALUE or previous return value */
++)
++{
++    uint8 *pend;
++#ifdef __mips__
++    uint8 tmp[4];
++    ulong *tptr = (ulong *)tmp;
 +
-+obj-y   := sbutils.o linux_osl.o bcmsrom.o bcmutils.o sbmips.o sbpci.o hnddma.o
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmsrom.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmsrom.c
---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmsrom.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmsrom.c	2005-08-28 11:12:20.408862496 +0200
-@@ -0,0 +1,685 @@
++	/* in case the beginning of the buffer isn't aligned */
++	pend = (uint8 *)((uint)(pdata + 3) & 0xfffffffc);
++	nbytes -= (pend - pdata);
++	while (pdata < pend)
++		CRC_INNER_LOOP(32, crc, *pdata++);
++
++    /* handle bulk of data as 32-bit words */
++    pend = pdata + (nbytes & 0xfffffffc);
++    while (pdata < pend) {
++	*tptr = *((ulong *)pdata)++;
++        CRC_INNER_LOOP(32, crc, tmp[0]);
++        CRC_INNER_LOOP(32, crc, tmp[1]);
++        CRC_INNER_LOOP(32, crc, tmp[2]);
++        CRC_INNER_LOOP(32, crc, tmp[3]);
++    }
++
++    /* 1-3 bytes at end of buffer */
++    pend = pdata + (nbytes & 0x03);
++    while (pdata < pend)
++        CRC_INNER_LOOP(32, crc, *pdata++);
++#else
++    pend = pdata + nbytes;
++    while (pdata < pend)
++        CRC_INNER_LOOP(32, crc, *pdata++);
++#endif
++       
++    return crc;
++}
++
++#ifdef notdef
++#define CLEN 	1499
++#define CBUFSIZ 	(CLEN+4)
++#define CNBUFS		5
++
++void testcrc32(void)
++{
++	uint j,k,l;
++	uint8 *buf;
++	uint len[CNBUFS];
++	uint32 crcr;
++	uint32 crc32tv[CNBUFS] =
++		{0xd2cb1faa, 0xd385c8fa, 0xf5b4f3f3, 0x55789e20, 0x00343110};
++
++	ASSERT((buf = MALLOC(CBUFSIZ*CNBUFS)) != NULL);
++
++	/* step through all possible alignments */
++	for (l=0;l<=4;l++) {
++		for (j=0; j<CNBUFS; j++) {
++			len[j] = CLEN;
++			for (k=0; k<len[j]; k++)
++				*(buf + j*CBUFSIZ + (k+l)) = (j+k) & 0xff;
++		}
++
++		for (j=0; j<CNBUFS; j++) {
++			crcr = crc32(buf + j*CBUFSIZ + l, len[j], CRC32_INIT_VALUE);
++			ASSERT(crcr == crc32tv[j]);
++		}
++	}
++
++	MFREE(buf, CBUFSIZ*CNBUFS);
++	return;
++}
++#endif
++
++
++
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/hnddma.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/hnddma.c
+--- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/hnddma.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/hnddma.c	2005-09-16 10:29:18.165593312 +0200
+@@ -0,0 +1,763 @@
 +/*
-+ *  Misc useful routines to access NIC SROM
++ * Generic Broadcom Home Networking Division (HND) DMA module.
++ * This supports the following chips: BCM42xx, 44xx, 47xx .
 + *
 + * Copyright 2001-2003, Broadcom Corporation
 + * All Rights Reserved.
@@ -1775,6056 +1480,5276 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmsrom.c linux-2.6.12.5-br
 + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
 + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
 + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id: bcmsrom.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
++ *
++ * $Id: hnddma.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
 + */
 +
 +#include <typedefs.h>
 +#include <osl.h>
-+#include <bcmutils.h>
-+#include <bcmsrom.h>
-+#include <bcmdevs.h>
 +#include <bcmendian.h>
-+#include <sbpcmcia.h>
-+#include <pcicfg.h>
++#include <bcmutils.h>
 +
-+#include <proto/ethernet.h>	/* for sprom content groking */
++struct dma_info;	/* forward declaration */
++#define di_t struct dma_info
++#include <hnddma.h>
 +
-+#define	VARS_MAX	4096	/* should be reduced */
++/* debug/trace */
++#define	DMA_ERROR(args)
++#define	DMA_TRACE(args)
 +
-+static int initvars_srom_pci(void *curmap, char **vars, int *count);
-+static int initvars_cis_pcmcia(void *osh, char **vars, int *count);
-+static int sprom_cmd_pcmcia(void *osh, uint8 cmd);
-+static int sprom_read_pcmcia(void *osh, uint16 addr, uint16 *data);
-+static int sprom_write_pcmcia(void *osh, uint16 addr, uint16 data);
-+static int sprom_read_pci(uint16 *sprom, uint byteoff, uint16 *buf, uint nbytes, bool check_crc);
++/* default dma message level(if input msg_level pointer is null in dma_attach()) */
++static uint dma_msg_level = 0;
 +
-+/*
-+ * Initialize the vars from the right source for this platform.
-+ * Return 0 on success, nonzero on error.
-+ */
-+int
-+srom_var_init(uint bus, void *curmap, void *osh, char **vars, int *count)
-+{
-+	if (vars == NULL)
-+		return (0);
++#define	MAXNAMEL	8
++#define	MAXDD		(DMAMAXRINGSZ / sizeof (dmadd_t))
 +
-+	switch (bus) {
-+	case SB_BUS:
-+		/* These two could be asserts ... */
-+		*vars = NULL;
-+		*count = 0;
-+		return(0);
++/* dma engine software state */
++typedef struct dma_info {
++	hnddma_t	hnddma;		/* exported structure */
++	uint		*msg_level;	/* message level pointer */
 +
-+	case PCI_BUS:
-+		ASSERT(curmap);	/* can not be NULL */
-+		return(initvars_srom_pci(curmap, vars, count));
++	char		name[MAXNAMEL];	/* callers name for diag msgs */
++	void		*drv;		/* driver handle */
++	void		*dev;		/* device handle */
++	dmaregs_t	*regs;		/* dma engine registers */
 +
-+	case PCMCIA_BUS:
-+		return(initvars_cis_pcmcia(osh, vars, count));
++	dmadd_t		*txd;		/* pointer to chip-specific tx descriptor ring */
++	uint		txin;		/* index of next descriptor to reclaim */
++	uint		txout;		/* index of next descriptor to post */
++	uint		txavail;	/* # free tx descriptors */
++	void		*txp[MAXDD];	/* parallel array of pointers to packets */
++	ulong		txdpa;		/* physical address of descriptor ring */
++	uint		txdalign;	/* #bytes added to alloc'd mem to align txd */
 +
++	dmadd_t		*rxd;		/* pointer to chip-specific rx descriptor ring */
++	uint		rxin;		/* index of next descriptor to reclaim */
++	uint		rxout;		/* index of next descriptor to post */
++	void		*rxp[MAXDD];	/* parallel array of pointers to packets */
++	ulong		rxdpa;		/* physical address of descriptor ring */
++	uint		rxdalign;	/* #bytes added to alloc'd mem to align rxd */
 +
-+	default:
-+		ASSERT(0);
-+	}
-+	return (-1);
-+}
++	/* tunables */
++	uint		ntxd;		/* # tx descriptors */
++	uint		nrxd;		/* # rx descriptors */
++	uint		rxbufsize;	/* rx buffer size in bytes */
++	uint		nrxpost;	/* # rx buffers to keep posted */
++	uint		rxoffset;	/* rxcontrol offset */
++	uint		ddoffset;	/* add to get dma address of descriptor ring */
++	uint		dataoffset;	/* add to get dma address of data buffer */
++} dma_info_t;
 +
++/* descriptor bumping macros */
++#define	NEXTTXD(i)	((i + 1) & (di->ntxd - 1))
++#define	PREVTXD(i)	((i - 1) & (di->ntxd - 1))
++#define	NEXTRXD(i)	((i + 1) & (di->nrxd - 1))
++#define	NTXDACTIVE(h, t)	((t - h) & (di->ntxd - 1))
++#define	NRXDACTIVE(h, t)	((t - h) & (di->nrxd - 1))
 +
-+/* support only 16-bit word read from srom */
-+int
-+srom_read(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf)
++/* macros to convert between byte offsets and indexes */
++#define	B2I(bytes)	((bytes) / sizeof (dmadd_t))
++#define	I2B(index)	((index) * sizeof (dmadd_t))
++
++void*
++dma_attach(void *drv, void *dev, char *name, dmaregs_t *regs, uint ntxd, uint nrxd,
++	uint rxbufsize, uint nrxpost, uint rxoffset, uint ddoffset, uint dataoffset, uint *msg_level)
 +{
-+	void *srom;
-+	uint i, off, nw;
++	dma_info_t *di;
++	void *va;
 +
-+	/* check input - 16-bit access only */
-+	if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2))
-+		return 1;
++	ASSERT(ntxd <= MAXDD);
++	ASSERT(nrxd <= MAXDD);
 +
-+	if (bus == PCI_BUS) {
-+		if (!curmap)
-+			return 1;
-+		srom = (void *)((uint)curmap + PCI_BAR0_SPROM_OFFSET);
-+		if (sprom_read_pci(srom, byteoff, buf, nbytes, FALSE))
-+			return 1;
-+	} else if (bus == PCMCIA_BUS) {
-+		off = byteoff / 2;
-+		nw = nbytes / 2;
-+		for (i = 0; i < nw; i++) {
-+			if (sprom_read_pcmcia(osh, (uint16)(off + i), (uint16*)(buf + i)))
-+				return 1;
-+		}
-+	} else {
-+		return 1;
-+	}
++	/* allocate private info structure */
++	if ((di = MALLOC(sizeof (dma_info_t))) == NULL)
++		return (NULL);
++	bzero((char*)di, sizeof (dma_info_t));
 +
-+	return 0;
-+}
++	/* set message level */
++	di->msg_level = msg_level ? msg_level : &dma_msg_level;
 +
-+/* support only 16-bit word write into srom */
-+int
-+srom_write(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf)
-+{
-+	uint16 *srom;
-+	uint i, off, nw, crc_range;
-+	uint16 image[SPROM_SIZE], *p;
-+	uint8 crc;
-+	volatile uint32 val32;
++	DMA_TRACE(("%s: dma_attach: drv 0x%x dev 0x%x regs 0x%x ntxd %d nrxd %d rxbufsize %d nrxpost %d rxoffset %d ddoffset 0x%x dataoffset 0x%x\n", name, (uint)drv, (uint)dev, (uint)regs, ntxd, nrxd, rxbufsize, nrxpost, rxoffset, ddoffset, dataoffset));
 +
-+	/* check input - 16-bit access only */
-+	if (byteoff & 1 || nbytes & 1 || (byteoff + nbytes) > (SPROM_SIZE * 2))
-+		return 1;
++	/* make a private copy of our callers name */
++	strncpy(di->name, name, MAXNAMEL);
++	di->name[MAXNAMEL-1] = '\0';
 +
-+	crc_range = ((bus == PCMCIA_BUS) ? SPROM_SIZE : SPROM_CRC_RANGE) * 2;
++	di->drv = drv;
++	di->dev = dev;
++	di->regs = regs;
 +
-+	/* if changes made inside crc cover range */
-+	if (byteoff < crc_range) {
-+		nw = (((byteoff + nbytes) > crc_range) ? byteoff + nbytes : crc_range) / 2;
-+		/* read data including entire first 64 words from srom */
-+		if (srom_read(bus, curmap, osh, 0, nw * 2, image))
-+			return 1;
-+		/* make changes */
-+		bcopy((void*)buf, (void*)&image[byteoff / 2], nbytes);
-+		/* calculate crc */
-+		htol16_buf(image, crc_range);
-+		crc = ~crc8((uint8 *)image, crc_range - 1, CRC8_INIT_VALUE);
-+		ltoh16_buf(image, crc_range);
-+		image[(crc_range / 2) - 1] = (crc << 8) | (image[(crc_range / 2) - 1] & 0xff);
-+		p = image;
-+		off = 0;
-+	} else {
-+		p = buf;
-+		off = byteoff / 2;
-+		nw = nbytes / 2;
++	/* allocate transmit descriptor ring */
++	if (ntxd) {
++		if ((va = DMA_ALLOC_CONSISTENT(dev, (DMAMAXRINGSZ + DMARINGALIGN), &di->txdpa)) == NULL)
++			goto fail;
++		di->txd = (dmadd_t*) ROUNDUP(va, DMARINGALIGN);
++		di->txdalign = ((uint)di->txd - (uint)va);
++		di->txdpa = di->txdpa + di->txdalign;
++		ASSERT(ISALIGNED(di->txd, DMARINGALIGN));
 +	}
 +
-+	if (bus == PCI_BUS) {
-+		srom = (uint16*)((uint)curmap + PCI_BAR0_SPROM_OFFSET);
-+		/* enable writes to the SPROM */
-+		val32 = OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32));
-+		val32 |= SPROM_WRITEEN;
-+		OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32);
-+		bcm_mdelay(500);
-+		/* write srom */
-+		for (i = 0; i < nw; i++) {
-+			W_REG(&srom[off + i], p[i]);
-+			bcm_mdelay(20);
-+		}
-+		/* disable writes to the SPROM */
-+		OSL_PCI_WRITE_CONFIG(osh, PCI_SPROM_CONTROL, sizeof(uint32), val32 & ~SPROM_WRITEEN);
-+	} else if (bus == PCMCIA_BUS) {
-+		/* enable writes to the SPROM */
-+		if (sprom_cmd_pcmcia(osh, SROM_WEN))
-+			return 1;
-+		bcm_mdelay(500);
-+		/* write srom */
-+		for (i = 0; i < nw; i++) {
-+			sprom_write_pcmcia(osh, (uint16)(off + i), p[i]);
-+			bcm_mdelay(20);
-+		}
-+		/* disable writes to the SPROM */
-+		if (sprom_cmd_pcmcia(osh, SROM_WDS))
-+			return 1;
-+	} else {
-+		return 1;
++	/* allocate receive descriptor ring */
++	if (nrxd) {
++		if ((va = DMA_ALLOC_CONSISTENT(dev, (DMAMAXRINGSZ + DMARINGALIGN), &di->rxdpa)) == NULL)
++			goto fail;
++		di->rxd = (dmadd_t*) ROUNDUP(va, DMARINGALIGN);
++		di->rxdalign = ((uint)di->rxd - (uint)va);
++		di->rxdpa = di->rxdpa + di->rxdalign;
++		ASSERT(ISALIGNED(di->rxd, DMARINGALIGN));
 +	}
 +
-+	bcm_mdelay(500);
-+	return 0;
-+}
++	/* save tunables */
++	di->ntxd = ntxd;
++	di->nrxd = nrxd;
++	di->rxbufsize = rxbufsize;
++	di->nrxpost = nrxpost;
++	di->rxoffset = rxoffset;
++	di->ddoffset = ddoffset;
++	di->dataoffset = dataoffset;
++
++	return ((void*)di);
 +
++fail:
++	dma_detach((void*)di);
++	return (NULL);
++}
 +
-+int
-+srom_parsecis(uint8 *cis, char **vars, int *count)
++/* may be called with core in reset */
++void
++dma_detach(dma_info_t *di)
 +{
-+	char eabuf[32];
-+	char *vp, *base;
-+	uint8 tup, tlen, sromrev = 1;
-+	int i, j;
-+	uint varsize;
-+	bool ag_init = FALSE;
-+	uint16 w;
++	if (di == NULL)
++		return;
 +
-+	ASSERT(vars);
-+	ASSERT(count);
++	DMA_TRACE(("%s: dma_detach\n", di->name));
 +
-+	base = vp = MALLOC(VARS_MAX);
-+	ASSERT(vp);
++	/* shouldn't be here if descriptors are unreclaimed */
++	ASSERT(di->txin == di->txout);
++	ASSERT(di->rxin == di->rxout);
 +
-+	i = 0;
-+	do {
-+		tup = cis[i++];
-+		tlen = cis[i++];
++	/* free dma descriptor rings */
++	if (di->txd)
++		DMA_FREE_CONSISTENT(di->dev, (void *)((uint)di->txd - di->txdalign), (DMAMAXRINGSZ + DMARINGALIGN), di->txdpa);
++	if (di->rxd)
++		DMA_FREE_CONSISTENT(di->dev, (void *)((uint)di->rxd - di->rxdalign), (DMAMAXRINGSZ + DMARINGALIGN), di->rxdpa);
 +
-+		switch (tup) {
-+		case CISTPL_MANFID:
-+			vp += sprintf(vp, "manfid=%d", (cis[i + 1] << 8) + cis[i]);
-+			vp++;
-+			vp += sprintf(vp, "prodid=%d", (cis[i + 3] << 8) + cis[i + 2]);
-+			vp++;
-+			break;
++	/* free our private info structure */
++	MFREE((void*)di, sizeof (dma_info_t));
++}
 +
-+		case CISTPL_FUNCE:
-+			if (cis[i] == LAN_NID) {
-+				ASSERT(cis[i + 1] == ETHER_ADDR_LEN);
-+				bcm_ether_ntoa((uchar*)&cis[i + 2], eabuf);
-+				vp += sprintf(vp, "il0macaddr=%s", eabuf);
-+				vp++;
-+			}
-+			break;
 +
-+		case CISTPL_CFTABLE:
-+			vp += sprintf(vp, "regwindowsz=%d", (cis[i + 7] << 8) | cis[i + 6]);
-+			vp++;
-+			break;
-+
-+		case CISTPL_BRCM_HNBU:
-+			switch (cis[i]) {
-+			case HNBU_CHIPID:
-+				vp += sprintf(vp, "vendid=%d", (cis[i + 2] << 8) + cis[i + 1]);
-+				vp++;
-+				vp += sprintf(vp, "devid=%d", (cis[i + 4] << 8) + cis[i + 3]);
-+				vp++;
-+				if (tlen == 7) {
-+					vp += sprintf(vp, "chiprev=%d", (cis[i + 6] << 8) + cis[i + 5]);
-+					vp++;
-+				}
-+				break;
-+
-+			case HNBU_BOARDREV:
-+				vp += sprintf(vp, "boardrev=%d", cis[i + 1]);
-+				vp++;
-+				break;
++void
++dma_txreset(dma_info_t *di)
++{
++	uint32 status;
 +
-+			case HNBU_AA:
-+				vp += sprintf(vp, "aa0=%d", cis[i + 1]);
-+				vp++;
-+				break;
++	DMA_TRACE(("%s: dma_txreset\n", di->name));
 +
-+			case HNBU_AG:
-+				vp += sprintf(vp, "ag0=%d", cis[i + 1]);
-+				vp++;
-+				ag_init = TRUE;
-+				break;
++	/* suspend tx DMA first */
++	W_REG(&di->regs->xmtcontrol, XC_SE);
++	SPINWAIT((status = (R_REG(&di->regs->xmtstatus) & XS_XS_MASK)) != XS_XS_DISABLED &&
++		 status != XS_XS_IDLE &&
++		 status != XS_XS_STOPPED,
++		 10000);
 +
-+			case HNBU_CC:
-+				vp += sprintf(vp, "cc=%d", cis[i + 1]);
-+				vp++;
-+				break;
++	W_REG(&di->regs->xmtcontrol, 0);
++	SPINWAIT((status = (R_REG(&di->regs->xmtstatus) & XS_XS_MASK)) != XS_XS_DISABLED,
++		 10000);
 +
-+			case HNBU_PAPARMS:
-+				vp += sprintf(vp, "pa0maxpwr=%d", cis[i + tlen - 1]);
-+				vp++;
-+				if (tlen == 9) {
-+					/* New version */
-+					for (j = 0; j < 3; j++) {
-+						vp += sprintf(vp, "pa0b%d=%d", j,
-+							      (cis[i + (j * 2) + 2] << 8) + cis[i + (j * 2) + 1]);
-+						vp++;
-+					}
-+					vp += sprintf(vp, "pa0itssit=%d", cis[i + 7]);
-+					vp++;
-+				}
-+				break;
++	if (status != XS_XS_DISABLED) {
++		DMA_ERROR(("%s: dma_txreset: dma cannot be stopped\n", di->name));
++	}
 +
-+			case HNBU_OEM:
-+				vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x",
-+					cis[i + 1], cis[i + 2], cis[i + 3], cis[i + 4],
-+					cis[i + 5], cis[i + 6], cis[i + 7], cis[i + 8]);
-+				vp++;
-+				break;
-+			case HNBU_BOARDFLAGS:
-+				w = (cis[i + 2] << 8) + cis[i + 1];
-+				if (w == 0xffff) w = 0;
-+				vp += sprintf(vp, "boardflags=%d", w);
-+				vp++;
-+				break;
-+			case HNBU_LED:
-+				if (cis[i + 1] != 0xff) {
-+					vp += sprintf(vp, "wl0gpio0=%d", cis[i + 1]);
-+					vp++;
-+				}
-+				if (cis[i + 2] != 0xff) {
-+					vp += sprintf(vp, "wl0gpio1=%d", cis[i + 2]);
-+					vp++;
-+				}
-+				if (cis[i + 3] != 0xff) {
-+					vp += sprintf(vp, "wl0gpio2=%d", cis[i + 3]);
-+					vp++;
-+				}
-+				if (cis[i + 4] != 0xff) {
-+					vp += sprintf(vp, "wl0gpio3=%d", cis[i + 4]);
-+					vp++;
-+				}
-+				break;
-+			}
-+			break;
++	/* wait for the last transaction to complete */
++	OSL_DELAY(300);
++}
 +
-+		}
-+		i += tlen;
-+	} while (tup != 0xff);
++void
++dma_rxreset(dma_info_t *di)
++{
++	uint32 status;
 +
-+	/* Set the srom version */
-+	vp += sprintf(vp, "sromrev=%d", sromrev);
-+	vp++;
++	DMA_TRACE(("%s: dma_rxreset\n", di->name));
 +
-+	/* For now just set boardflags2 to zero */
-+	vp += sprintf(vp, "boardflags2=0");
-+	vp++;
++	W_REG(&di->regs->rcvcontrol, 0);
++	SPINWAIT((status = (R_REG(&di->regs->rcvstatus) & RS_RS_MASK)) != RS_RS_DISABLED,
++		 10000);
 +
-+	/* if there is no antenna gain field, set default */
-+	if (ag_init == FALSE) {
-+		vp += sprintf(vp, "ag0=%d", 0xff);
-+		vp++;
++	if (status != RS_RS_DISABLED) {
++		DMA_ERROR(("%s: dma_rxreset: dma cannot be stopped\n", di->name));
 +	}
++}
 +
-+	/* final nullbyte terminator */
-+	*vp++ = '\0';
-+	varsize = (uint)vp - (uint)base;
++void
++dma_txinit(dma_info_t *di)
++{
++	DMA_TRACE(("%s: dma_txinit\n", di->name));
 +
-+	ASSERT(varsize < VARS_MAX);
++	di->txin = di->txout = 0;
++	di->txavail = di->ntxd - 1;
 +
-+	if (varsize == VARS_MAX) {
-+		*vars = base;
-+	} else {
-+		vp = MALLOC(varsize);
-+		ASSERT(vp);
-+		bcopy(base, vp, varsize);
-+		MFREE(base, VARS_MAX);
-+		*vars = vp;
-+	}
-+	*count = varsize;
++	/* clear tx descriptor ring */
++	BZERO_SM((void*)di->txd, (di->ntxd * sizeof (dmadd_t)));
 +
-+	return (0);
++	W_REG(&di->regs->xmtcontrol, XC_XE);
++	W_REG(&di->regs->xmtaddr, (di->txdpa + di->ddoffset));
 +}
 +
-+
-+/* set PCMCIA sprom command register */
-+static int
-+sprom_cmd_pcmcia(void *osh, uint8 cmd)
++bool
++dma_txenabled(dma_info_t *di)
 +{
-+	uint8 status;
-+	uint wait_cnt = 1000;
++	uint32 xc;
 +
-+	/* write sprom command register */
-+	OSL_PCMCIA_WRITE_ATTR(osh, SROM_CS, &cmd, 1);
++	/* If the chip is dead, it is not enabled :-) */
++	xc = R_REG(&di->regs->xmtcontrol);
++	return ((xc != 0xffffffff) && (xc & XC_XE));
++}
 +
-+	/* wait status */
-+	while (wait_cnt--) {
-+		OSL_PCMCIA_READ_ATTR(osh, SROM_CS, &status, 1);
-+		if (status & SROM_DONE)
-+			return 0;
-+	}
-+	return 1;
++void
++dma_txsuspend(dma_info_t *di)
++{
++	DMA_TRACE(("%s: dma_txsuspend\n", di->name));
++	OR_REG(&di->regs->xmtcontrol, XC_SE);
 +}
 +
-+/* read a word from the PCMCIA srom */
-+static int
-+sprom_read_pcmcia(void *osh, uint16 addr, uint16 *data)
++void
++dma_txresume(dma_info_t *di)
 +{
-+	uint8 addr_l, addr_h, data_l, data_h;
++	DMA_TRACE(("%s: dma_txresume\n", di->name));
++	AND_REG(&di->regs->xmtcontrol, ~XC_SE);
++}
 +
-+	addr_l = (uint8)((addr * 2) & 0xff);
-+	addr_h = (uint8)(((addr * 2) >> 8) & 0xff);
++bool
++dma_txsuspended(dma_info_t *di)
++{
++	uint32 xc;
++	uint32 xs;
 +
-+	/* set address */
-+	OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1);
-+	OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1);
++	xc = R_REG(&di->regs->xmtcontrol);
++	if (xc & XC_SE) {
++		xs = R_REG(&di->regs->xmtstatus);
++		return ((xs & XS_XS_MASK) == XS_XS_IDLE);
++	}
++	return 0;
++}
 +
-+	/* do read */
-+	if (sprom_cmd_pcmcia(osh, SROM_READ))
-+		return 1;
++bool
++dma_txstopped(dma_info_t *di)
++{
++	return ((R_REG(&di->regs->xmtstatus) & XS_XS_MASK) == XS_XS_STOPPED);
++}
 +
-+	/* read data */
-+	OSL_PCMCIA_READ_ATTR(osh, SROM_DATAH, &data_h, 1);
-+	OSL_PCMCIA_READ_ATTR(osh, SROM_DATAL, &data_l, 1);
++bool
++dma_rxstopped(dma_info_t *di)
++{
++	return ((R_REG(&di->regs->rcvstatus) & RS_RS_MASK) == RS_RS_STOPPED);
++}
 +
-+	*data = (data_h << 8) | data_l;
-+	return 0;
++void
++dma_fifoloopbackenable(dma_info_t *di)
++{
++	DMA_TRACE(("%s: dma_fifoloopbackenable\n", di->name));
++	OR_REG(&di->regs->xmtcontrol, XC_LE);
 +}
 +
-+/* write a word to the PCMCIA srom */
-+static int
-+sprom_write_pcmcia(void *osh, uint16 addr, uint16 data)
++void
++dma_rxinit(dma_info_t *di)
 +{
-+	uint8 addr_l, addr_h, data_l, data_h;
++	DMA_TRACE(("%s: dma_rxinit\n", di->name));
 +
-+	addr_l = (uint8)((addr * 2) & 0xff);
-+	addr_h = (uint8)(((addr * 2) >> 8) & 0xff);
-+	data_l = (uint8)(data & 0xff);
-+	data_h = (uint8)((data >> 8) & 0xff);
++	di->rxin = di->rxout = 0;
 +
-+	/* set address */
-+	OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRH, &addr_h, 1);
-+	OSL_PCMCIA_WRITE_ATTR(osh, SROM_ADDRL, &addr_l, 1);
++	/* clear rx descriptor ring */
++	BZERO_SM((void*)di->rxd, (di->nrxd * sizeof (dmadd_t)));
 +
-+	/* write data */
-+	OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAH, &data_h, 1);
-+	OSL_PCMCIA_WRITE_ATTR(osh, SROM_DATAL, &data_l, 1);
++	dma_rxenable(di);
++	W_REG(&di->regs->rcvaddr, (di->rxdpa + di->ddoffset));
++}
 +
-+	/* do write */
-+	return sprom_cmd_pcmcia(osh, SROM_WRITE);
++void
++dma_rxenable(dma_info_t *di)
++{
++	DMA_TRACE(("%s: dma_rxenable\n", di->name));
++	W_REG(&di->regs->rcvcontrol, ((di->rxoffset << RC_RO_SHIFT) | RC_RE));
 +}
 +
-+/*
-+ * Read in and validate sprom.
-+ * Return 0 on success, nonzero on error.
-+ */
-+static int
-+sprom_read_pci(uint16 *sprom, uint byteoff, uint16 *buf, uint nbytes, bool check_crc)
++bool
++dma_rxenabled(dma_info_t *di)
 +{
-+	int off, nw;
-+	uint8 chk8;
-+	int i;
-+
-+	off = byteoff / 2;
-+	nw = ROUNDUP(nbytes, 2) / 2;
-+
-+	/* read the sprom */
-+	for (i = 0; i < nw; i++)
-+		buf[i] = R_REG(&sprom[off + i]);
-+
-+	if (check_crc) {
-+		/* fixup the endianness so crc8 will pass */
-+		htol16_buf(buf, nw * 2);
-+		if ((chk8 = crc8((uchar*)buf, nbytes, CRC8_INIT_VALUE)) != CRC8_GOOD_VALUE)
-+			return (1);
-+		/* now correct the endianness of the byte array */
-+		ltoh16_buf(buf, nw * 2);
-+	}
++	uint32 rc;
 +
-+	return (0);
++	rc = R_REG(&di->regs->rcvcontrol);
++	return ((rc != 0xffffffff) && (rc & RC_RE));
 +}
 +
 +/*
-+ * Initialize nonvolatile variable table from sprom.
-+ * Return 0 on success, nonzero on error.
++ * The BCM47XX family supports full 32bit dma engine buffer addressing so
++ * dma buffers can cross 4 Kbyte page boundaries.
 + */
-+
-+static int
-+initvars_srom_pci(void *curmap, char **vars, int *count)
++int
++dma_txfast(dma_info_t *di, void *p0, uint32 coreflags)
 +{
-+	uint16 w, b[64];
-+	uint8 sromrev;
-+	struct ether_addr ea;
-+	char eabuf[32];		     
-+	int c, woff, i;
-+	char *vp, *base;
++	void *p, *next;
++	uchar *data;
++	uint len;
++	uint txout;
++	uint32 ctrl;
++	uint32 pa;
 +
-+	if (sprom_read_pci((void *)((uint)curmap + PCI_BAR0_SPROM_OFFSET), 0, b, sizeof (b), TRUE))
-+		return (-1);
++	DMA_TRACE(("%s: dma_txfast\n", di->name));
 +
-+	/* top word of sprom contains version and crc8 */
-+	sromrev = b[63] & 0xff;
-+	if ((sromrev != 1) && (sromrev != 2)) {
-+		return (-2);
-+	}
++	txout = di->txout;
++	ctrl = 0;
 +
-+	ASSERT(vars);
-+	ASSERT(count);
++	/*
++	 * Walk the chain of packet buffers
++	 * allocating and initializing transmit descriptor entries.
++	 */
++	for (p = p0; p; p = next) {
++		data = PKTDATA(di->drv, p);
++		len = PKTLEN(di->drv, p);
++		next = PKTNEXT(di->drv, p);
 +
-+	base = vp = MALLOC(VARS_MAX);
-+	ASSERT(vp);
++		/* return nonzero if out of tx descriptors */
++		if (NEXTTXD(txout) == di->txin)
++			goto outoftxd;
 +
-+	vp += sprintf(vp, "sromrev=%d", sromrev);
-+	vp++;
++		if (len == 0)
++			continue;
 +
-+	if (sromrev >= 2) {
-+		/* New section takes over the 4th hardware function space */
++		/* get physical address of buffer start */
++		pa = (uint32) DMA_MAP(di->dev, data, len, DMA_TX, p);
 +
-+		/* Word 28 is boardflags2 */
-+		vp += sprintf(vp, "boardflags2=%d", b[28]);
-+		vp++;
++		/* build the descriptor control value */
++		ctrl = len & CTRL_BC_MASK;
 +
-+		/* Word 29 is max power 11a high/low */
-+		w = b[29];
-+		vp += sprintf(vp, "pa1himaxpwr=%d", w & 0xff);
-+		vp++;
-+		vp += sprintf(vp, "pa1lomaxpwr=%d", (w >> 8) & 0xff);
-+		vp++;
++		ctrl |= coreflags;
++		
++		if (p == p0)
++			ctrl |= CTRL_SOF;
++		if (next == NULL)
++			ctrl |= (CTRL_IOC | CTRL_EOF);
++		if (txout == (di->ntxd - 1))
++			ctrl |= CTRL_EOT;
 +
-+		/* Words 30-32 set the 11alow pa settings,
-+		 * 33-35 are the 11ahigh ones.
-+		 */
-+		for (i = 0; i < 3; i++) {
-+			vp += sprintf(vp, "pa1lob%d=%d", i, b[30 + i]);
-+			vp++;
-+			vp += sprintf(vp, "pa1hib%d=%d", i, b[33 + i]);
-+			vp++;
-+		}
-+		w = b[59];
-+		if (w == 0)
-+			vp += sprintf(vp, "ccode=");
-+		else
-+			vp += sprintf(vp, "ccode=%c%c", (w >> 8), (w & 0xff));
-+		vp++;
++		/* init the tx descriptor */
++		W_SM(&di->txd[txout].ctrl, BUS_SWAP32(ctrl));
++		W_SM(&di->txd[txout].addr, BUS_SWAP32(pa + di->dataoffset));
 +
++		ASSERT(di->txp[txout] == NULL);
++
++		txout = NEXTTXD(txout);
 +	}
 +
-+	/* parameter section of sprom starts at byte offset 72 */
-+	woff = 72/2;
++	/* if last txd eof not set, fix it */
++	if (!(ctrl & CTRL_EOF))
++		W_SM(&di->txd[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF));
 +
-+	/* first 6 bytes are il0macaddr */
-+	ea.octet[0] = (b[woff] >> 8) & 0xff;
-+	ea.octet[1] = b[woff] & 0xff;
-+	ea.octet[2] = (b[woff+1] >> 8) & 0xff;
-+	ea.octet[3] = b[woff+1] & 0xff;
-+	ea.octet[4] = (b[woff+2] >> 8) & 0xff;
-+	ea.octet[5] = b[woff+2] & 0xff;
-+	woff += ETHER_ADDR_LEN/2 ;
-+	bcm_ether_ntoa((uchar*)&ea, eabuf);
-+	vp += sprintf(vp, "il0macaddr=%s", eabuf);
-+	vp++;
++	/* save the packet */
++	di->txp[PREVTXD(txout)] = p0;
 +
-+	/* next 6 bytes are et0macaddr */
-+	ea.octet[0] = (b[woff] >> 8) & 0xff;
-+	ea.octet[1] = b[woff] & 0xff;
-+	ea.octet[2] = (b[woff+1] >> 8) & 0xff;
-+	ea.octet[3] = b[woff+1] & 0xff;
-+	ea.octet[4] = (b[woff+2] >> 8) & 0xff;
-+	ea.octet[5] = b[woff+2] & 0xff;
-+	woff += ETHER_ADDR_LEN/2 ;
-+	bcm_ether_ntoa((uchar*)&ea, eabuf);
-+	vp += sprintf(vp, "et0macaddr=%s", eabuf);
-+	vp++;
++	/* bump the tx descriptor index */
++	di->txout = txout;
 +
-+	/* next 6 bytes are et1macaddr */
-+	ea.octet[0] = (b[woff] >> 8) & 0xff;
-+	ea.octet[1] = b[woff] & 0xff;
-+	ea.octet[2] = (b[woff+1] >> 8) & 0xff;
-+	ea.octet[3] = b[woff+1] & 0xff;
-+	ea.octet[4] = (b[woff+2] >> 8) & 0xff;
-+	ea.octet[5] = b[woff+2] & 0xff;
-+	woff += ETHER_ADDR_LEN/2 ;
-+	bcm_ether_ntoa((uchar*)&ea, eabuf);
-+	vp += sprintf(vp, "et1macaddr=%s", eabuf);
-+	vp++;
++	/* kick the chip */
++	W_REG(&di->regs->xmtptr, I2B(txout));
 +
-+	/*
-+	 * Enet phy settings one or two singles or a dual
-+	 * Bits 4-0 : MII address for enet0 (0x1f for not there)
-+	 * Bits 9-5 : MII address for enet1 (0x1f for not there)
-+	 * Bit 14   : Mdio for enet0
-+	 * Bit 15   : Mdio for enet1
-+	 */
-+	w = b[woff];
-+	vp += sprintf(vp, "et0phyaddr=%d", (w & 0x1f));
-+	vp++;
-+	vp += sprintf(vp, "et1phyaddr=%d", ((w >> 5) & 0x1f));
-+	vp++;
-+	vp += sprintf(vp, "et0mdcport=%d", ((w >> 14) & 0x1));
-+	vp++;
-+	vp += sprintf(vp, "et1mdcport=%d", ((w >> 15) & 0x1));
-+	vp++;
++	/* tx flow control */
++	di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
 +
-+	/* Word 46 has board rev, antennas 0/1 & Country code/control */
-+	w = b[46];
-+	vp += sprintf(vp, "boardrev=%d", w & 0xff);
-+	vp++;
++	return (0);
 +
-+	if (sromrev > 1)
-+		vp += sprintf(vp, "cctl=%d", (w >> 8) & 0xf);
-+	else
-+		vp += sprintf(vp, "cc=%d", (w >> 8) & 0xf);
-+	vp++;
++outoftxd:
++	DMA_ERROR(("%s: dma_txfast: out of txds\n", di->name));
++	PKTFREE(di->drv, p0, TRUE);
++	di->txavail = 0;
++	di->hnddma.txnobuf++;
++	return (-1);
++}
 +
-+	vp += sprintf(vp, "aa0=%d", (w >> 12) & 0x3);
-+	vp++;
++#define	PAGESZ		4096
++#define	PAGEBASE(x)	((uint)(x) & ~4095)
 +
-+	vp += sprintf(vp, "aa1=%d", (w >> 14) & 0x3);
-+	vp++;
++/*
++ * Just like above except go through the extra effort of splitting
++ * buffers that cross 4Kbyte boundaries into multiple tx descriptors.
++ */
++int
++dma_tx(dma_info_t *di, void *p0, uint32 coreflags)
++{
++	void *p, *next;
++	uchar *data;
++	uint plen, len;
++	uchar *page, *start, *end;
++	uint txout;
++	uint32 ctrl;
++	uint32 pa;
 +
-+	/* Words 47-49 set the (wl) pa settings */
-+	woff = 47;
++	DMA_TRACE(("%s: dma_tx\n", di->name));
 +
-+	for (i = 0; i < 3; i++) {
-+		vp += sprintf(vp, "pa0b%d=%d", i, b[woff+i]);
-+		vp++;
-+		vp += sprintf(vp, "pa1b%d=%d", i, b[woff+i+6]);
-+		vp++;
-+	}
++	txout = di->txout;
++	ctrl = 0;
 +
 +	/*
-+	 * Words 50-51 set the customer-configured wl led behavior.
-+	 * 8 bits/gpio pin.  High bit:  activehi=0, activelo=1;
-+	 * LED behavior values defined in wlioctl.h .
++	 * Walk the chain of packet buffers
++	 * splitting those that cross 4 Kbyte boundaries
++	 * allocating and initializing transmit descriptor entries.
 +	 */
-+	w = b[50];
-+	if ((w != 0) && (w != 0xffff)) {
-+		/* gpio0 */
-+		vp += sprintf(vp, "wl0gpio0=%d", (w & 0xff));
-+		vp++;
++	for (p = p0; p; p = next) {
++		data = PKTDATA(di->drv, p);
++		plen = PKTLEN(di->drv, p);
++		next = PKTNEXT(di->drv, p);
 +
-+		/* gpio1 */
-+		vp += sprintf(vp, "wl0gpio1=%d", (w >> 8) & 0xff);
-+		vp++;
-+	}
-+	w = b[51];
-+	if ((w != 0) && (w != 0xffff)) {
-+		/* gpio2 */
-+		vp += sprintf(vp, "wl0gpio2=%d", w & 0xff);
-+		vp++;
++		if (plen == 0)
++			continue;
 +
-+		/* gpio3 */
-+		vp += sprintf(vp, "wl0gpio3=%d", (w >> 8) & 0xff);
-+		vp++;
-+	}
-+	
-+	/* Word 52 is max power 0/1 */
-+	w = b[52];
-+	vp += sprintf(vp, "pa0maxpwr=%d", w & 0xff);
-+	vp++;
-+	vp += sprintf(vp, "pa1maxpwr=%d", (w >> 8) & 0xff);
-+	vp++;
++		for (page = (uchar*)PAGEBASE(data);
++			page <= (uchar*)PAGEBASE(data + plen - 1);
++			page += PAGESZ) {
 +
-+	/* Word 56 is idle tssi target 0/1 */
-+	w = b[56];
-+	vp += sprintf(vp, "pa0itssit=%d", w & 0xff);
-+	vp++;
-+	vp += sprintf(vp, "pa1itssit=%d", (w >> 8) & 0xff);
-+	vp++;
++			/* return nonzero if out of tx descriptors */
++			if (NEXTTXD(txout) == di->txin)
++				goto outoftxd;
 +
-+	/* Word 57 is boardflags, if not programmed make it zero */
-+	w = b[57];
-+	if (w == 0xffff) w = 0;
-+	vp += sprintf(vp, "boardflags=%d", w);
-+	vp++;
++			start = (page == (uchar*)PAGEBASE(data))?  data: page;
++			end = (page == (uchar*)PAGEBASE(data + plen))?
++				(data + plen): (page + PAGESZ);
++			len = end - start;
 +
-+	/* Word 58 is antenna gain 0/1 */
-+	w = b[58];
-+	vp += sprintf(vp, "ag0=%d", w & 0xff);
-+	vp++;
++			/* build the descriptor control value */
++			ctrl = len & CTRL_BC_MASK;
 +
-+	vp += sprintf(vp, "ag1=%d", (w >> 8) & 0xff);
-+	vp++;
++			ctrl |= coreflags;
 +
-+	if (sromrev == 1) {
-+		/* set the oem string */
-+		vp += sprintf(vp, "oem=%02x%02x%02x%02x%02x%02x%02x%02x",
-+			      ((b[59] >> 8) & 0xff), (b[59] & 0xff),
-+			      ((b[60] >> 8) & 0xff), (b[60] & 0xff),
-+			      ((b[61] >> 8) & 0xff), (b[61] & 0xff),
-+			      ((b[62] >> 8) & 0xff), (b[62] & 0xff));
-+		vp++;
-+	}
++			if ((p == p0) && (start == data))
++				ctrl |= CTRL_SOF;
++			if ((next == NULL) && (end == (data + plen)))
++				ctrl |= (CTRL_IOC | CTRL_EOF);
++			if (txout == (di->ntxd - 1))
++				ctrl |= CTRL_EOT;
 +
-+	/* final nullbyte terminator */
-+	*vp++ = '\0';
++			/* get physical address of buffer start */
++			pa = (uint32) DMA_MAP(di->dev, start, len, DMA_TX, p);
 +
-+	c = vp - base;
-+	ASSERT(c <= VARS_MAX);
++			/* init the tx descriptor */
++			W_SM(&di->txd[txout].ctrl, BUS_SWAP32(ctrl));
++			W_SM(&di->txd[txout].addr, BUS_SWAP32(pa + di->dataoffset));
 +
-+	if (c == VARS_MAX) {
-+		*vars = base;
-+	} else {
-+		vp = MALLOC(c);
-+		ASSERT(vp);
-+		bcopy(base, vp, c);
-+		MFREE(base, VARS_MAX);
-+		*vars = vp;
++			ASSERT(di->txp[txout] == NULL);
++
++			txout = NEXTTXD(txout);
++		}
 +	}
-+	*count = c;
 +
-+	return (0);
-+}
++	/* if last txd eof not set, fix it */
++	if (!(ctrl & CTRL_EOF))
++		W_SM(&di->txd[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF));
 +
-+/*
-+ * Read the cis and call parsecis to initialize the vars.
-+ * Return 0 on success, nonzero on error.
-+ */
-+static int
-+initvars_cis_pcmcia(void *osh, char **vars, int *count)
-+{
-+	uint8 *cis = NULL;
-+	int rc;
++	/* save the packet */
++	di->txp[PREVTXD(txout)] = p0;
 +
-+	if ((cis = MALLOC(CIS_SIZE)) == NULL)
-+		return (-1);
++	/* bump the tx descriptor index */
++	di->txout = txout;
 +
-+	OSL_PCMCIA_READ_ATTR(osh, 0, cis, CIS_SIZE);
++	/* kick the chip */
++	W_REG(&di->regs->xmtptr, I2B(txout));
 +
-+	rc = srom_parsecis(cis, vars, count);
++	/* tx flow control */
++	di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
 +
-+	MFREE(cis, CIS_SIZE);
++	return (0);
 +
-+	return (rc);
++outoftxd:
++	DMA_ERROR(("%s: dma_tx: out of txds\n", di->name));
++	PKTFREE(di->drv, p0, TRUE);
++	di->txavail = 0;
++	di->hnddma.txnobuf++;
++	return (-1);
 +}
 +
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmutils.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmutils.c
---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/bcmutils.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/bcmutils.c	2005-08-28 11:12:20.428859456 +0200
-@@ -0,0 +1,691 @@
-+/*
-+ * Misc useful OS-independent routines.
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation   
-+ * All Rights Reserved.   
-+ *    
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
-+ * $Id: bcmutils.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
-+ */
-+
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <bcmutils.h>
-+#include <bcmendian.h>
-+#include <bcmnvram.h>
-+
-+unsigned char bcm_ctype[] = {
-+	_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,			/* 0-7 */
-+	_BCM_C,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C|_BCM_S,_BCM_C,_BCM_C,		/* 8-15 */
-+	_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,			/* 16-23 */
-+	_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,_BCM_C,			/* 24-31 */
-+	_BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,			/* 32-39 */
-+	_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,			/* 40-47 */
-+	_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,_BCM_D,			/* 48-55 */
-+	_BCM_D,_BCM_D,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,			/* 56-63 */
-+	_BCM_P,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U|_BCM_X,_BCM_U,	/* 64-71 */
-+	_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,			/* 72-79 */
-+	_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,			/* 80-87 */
-+	_BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,			/* 88-95 */
-+	_BCM_P,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L|_BCM_X,_BCM_L,	/* 96-103 */
-+	_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,			/* 104-111 */
-+	_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,			/* 112-119 */
-+	_BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_C,			/* 120-127 */
-+	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,		/* 128-143 */
-+	0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,0,		/* 144-159 */
-+	_BCM_S|_BCM_SP,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,   /* 160-175 */
-+	_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,_BCM_P,       /* 176-191 */
-+	_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,       /* 192-207 */
-+	_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_P,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_U,_BCM_L,       /* 208-223 */
-+	_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,       /* 224-239 */
-+	_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_P,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L,_BCM_L        /* 240-255 */
-+};
-+
-+uchar
-+bcm_toupper(uchar c)
++/* returns a pointer to the next frame received, or NULL if there are no more */
++void*
++dma_rx(dma_info_t *di)
 +{
-+	if (bcm_islower(c))
-+		c -= 'a'-'A';
-+	return (c);
-+}
++	void *p;
++	uint len;
++	int skiplen = 0;
 +
-+ulong
-+bcm_strtoul(char *cp, char **endp, uint base)
-+{
-+	ulong result, value;
-+	bool minus;
-+	
-+	minus = FALSE;
++	while ((p = dma_getnextrxp(di, FALSE))) {
++		/* skip giant packets which span multiple rx descriptors */
++		if (skiplen > 0) {
++			skiplen -= di->rxbufsize;
++			if (skiplen < 0)
++				skiplen = 0;
++			PKTFREE(di->drv, p, FALSE);
++			continue;
++		}
 +
-+	while (bcm_isspace(*cp))
-+		cp++;
-+	
-+	if (cp[0] == '+')
-+		cp++;
-+	else if (cp[0] == '-') {
-+		minus = TRUE;
-+		cp++;
-+	}
-+	
-+	if (base == 0) {
-+		if (cp[0] == '0') {
-+			if ((cp[1] == 'x') || (cp[1] == 'X')) {
-+				base = 16;
-+				cp = &cp[2];
-+			} else {
-+				base = 8;
-+				cp = &cp[1];
-+			}
-+		} else
-+			base = 10;
-+	} else if (base == 16 && (cp[0] == '0') && ((cp[1] == 'x') || (cp[1] == 'X'))) {
-+		cp = &cp[2];
-+	}
-+		   
-+	result = 0;
++		len = ltoh16(*(uint16*)(PKTDATA(di->drv, p)));
++		DMA_TRACE(("%s: dma_rx len %d\n", di->name, len));
 +
-+	while (bcm_isxdigit(*cp) &&
-+	       (value = bcm_isdigit(*cp) ? *cp-'0' : bcm_toupper(*cp)-'A'+10) < base) {
-+		result = result*base + value;
-+		cp++;
-+	}
++		/* bad frame length check */
++		if (len > (di->rxbufsize - di->rxoffset)) {
++			DMA_ERROR(("%s: dma_rx: bad frame length (%d)\n", di->name, len));
++			if (len > 0)
++				skiplen = len - (di->rxbufsize - di->rxoffset);
++			PKTFREE(di->drv, p, FALSE);
++			di->hnddma.rxgiants++;
++			continue;
++		}
 +
-+	if (minus)
-+		result = (ulong)(result * -1);
++		/* set actual length */
++		PKTSETLEN(di->drv, p, (di->rxoffset + len));
 +
-+	if (endp)
-+		*endp = (char *)cp;
++		break;
++	}
 +
-+	return (result);
++	return (p);
 +}
 +
-+uint
-+bcm_atoi(char *s)
++/* post receive buffers */
++void
++dma_rxfill(dma_info_t *di)
 +{
++	void *p;
++	uint rxin, rxout;
++	uint ctrl;
 +	uint n;
++	uint i;
++	uint32 pa;
++	uint rxbufsize;
 +
-+	n = 0;
++	/*
++	 * Determine how many receive buffers we're lacking
++	 * from the full complement, allocate, initialize,
++	 * and post them, then update the chip rx lastdscr.
++	 */
 +
-+	while (bcm_isdigit(*s))
-+		n = (n * 10) + *s++ - '0';
-+	return (n);
-+}
++	rxin = di->rxin;
++	rxout = di->rxout;
++	rxbufsize = di->rxbufsize;
 +
-+void
-+deadbeef(char *p, uint len)
-+{
-+	static uchar meat[] = { 0xde, 0xad, 0xbe, 0xef };
++	n = di->nrxpost - NRXDACTIVE(rxin, rxout);
 +
-+	while (len-- > 0) {
-+		*p = meat[((uint)p) & 3];
-+		p++;
-+	}
-+}
++	DMA_TRACE(("%s: dma_rxfill: post %d\n", di->name, n));
 +
-+/* pretty hex print a contiguous buffer */
-+void
-+prhex(char *msg, uchar *buf, uint nbytes)
-+{
-+	char line[256];
-+	char* p;
-+	uint i;
++	for (i = 0; i < n; i++) {
++		if ((p = PKTGET(di->drv, rxbufsize, FALSE)) == NULL) {
++			DMA_ERROR(("%s: dma_rxfill: out of rxbufs\n", di->name));
++			di->hnddma.rxnobuf++;
++			break;
++		}
 +
-+	if (msg && (msg[0] != '\0'))
-+		printf("%s: ", msg);
++		*(uint32*)(OSL_UNCACHED(PKTDATA(di->drv, p))) = 0;
 +
-+	p = line;
-+	for (i = 0; i < nbytes; i++) {
-+		if (i % 16 == 0) {
-+			p += sprintf(p, "%04d: ", i);	/* line prefix */
-+		}
-+		p += sprintf(p, "%02x ", buf[i]);
-+		if (i % 16 == 15) {
-+			printf("%s\n", line);		/* flush line */
-+			p = line;
-+		}
++		pa = (uint32) DMA_MAP(di->dev, PKTDATA(di->drv, p), rxbufsize, DMA_RX, p);
++		ASSERT(ISALIGNED(pa, 4));
++
++		/* save the free packet pointer */
++		ASSERT(di->rxp[rxout] == NULL);
++		di->rxp[rxout] = p;
++
++		/* prep the descriptor control value */
++		ctrl = rxbufsize;
++		if (rxout == (di->nrxd - 1))
++			ctrl |= CTRL_EOT;
++
++		/* init the rx descriptor */
++		W_SM(&di->rxd[rxout].ctrl, BUS_SWAP32(ctrl));
++		W_SM(&di->rxd[rxout].addr, BUS_SWAP32(pa + di->dataoffset));
++
++		rxout = NEXTRXD(rxout);
 +	}
 +
-+	/* flush last partial line */
-+	if (p != line)
-+		printf("%s\n", line);
++	di->rxout = rxout;
++
++	/* update the chip lastdscr pointer */
++	W_REG(&di->regs->rcvptr, I2B(rxout));
 +}
 +
-+/* pretty hex print a pkt buffer chain */
 +void
-+prpkt(char *msg, void *drv, void *p0)
++dma_txreclaim(dma_info_t *di, bool forceall)
 +{
 +	void *p;
 +
-+	if (msg && (msg[0] != '\0'))
-+		printf("%s: ", msg);
++	DMA_TRACE(("%s: dma_txreclaim %s\n", di->name, forceall ? "all" : ""));
 +
-+	for (p = p0; p; p = PKTNEXT(drv, p))
-+		prhex(NULL, PKTDATA(drv, p), PKTLEN(drv, p));
++	while ((p = dma_getnexttxp(di, forceall)))
++		PKTFREE(di->drv, p, TRUE);
 +}
 +
-+/* copy a pkt buffer chain into a buffer */
-+uint
-+pktcopy(void *drv, void *p, uint offset, int len, uchar *buf)
++/*
++ * Reclaim next completed txd (txds if using chained buffers) and
++ * return associated packet.
++ * If 'force' is true, reclaim txd(s) and return associated packet
++ * regardless of the value of the hardware "curr" pointer.
++ */
++void*
++dma_getnexttxp(dma_info_t *di, bool forceall)
 +{
-+	uint n, ret = 0;
++	uint start, end, i;
++	void *txp;
 +
-+	if (len < 0)
-+		len = 4096;	/* "infinite" */
++	DMA_TRACE(("%s: dma_getnexttxp %s\n", di->name, forceall ? "all" : ""));
 +
-+	/* skip 'offset' bytes */
-+	for (; p && offset; p = PKTNEXT(drv, p)) {
-+		if (offset < (uint)PKTLEN(drv, p))
-+			break;
-+		offset -= PKTLEN(drv, p);
-+	}
++	txp = NULL;
 +
-+	if (!p)
-+		return 0;
++	start = di->txin;
++	if (forceall)
++		end = di->txout;
++	else
++		end = B2I(R_REG(&di->regs->xmtstatus) & XS_CD_MASK);
 +
-+	/* copy the data */
-+	for (; p && len; p = PKTNEXT(drv, p)) {
-+		n = MIN((uint)PKTLEN(drv, p) - offset, (uint)len);
-+		bcopy(PKTDATA(drv, p) + offset, buf, n);
-+		buf += n;
-+		len -= n;
-+		ret += n;
-+		offset = 0;
-+	}
++	if ((start == 0) && (end > di->txout))
++		goto bogus;
 +
-+	return ret;
-+}
++	for (i = start; i != end && !txp; i = NEXTTXD(i)) {
++		DMA_UNMAP(di->dev, (BUS_SWAP32(R_SM(&di->txd[i].addr)) - di->dataoffset),
++			  (BUS_SWAP32(R_SM(&di->txd[i].ctrl)) & CTRL_BC_MASK), DMA_TX, di->txp[i]);
++		W_SM(&di->txd[i].addr, 0xdeadbeef);
++		txp = di->txp[i];
++		di->txp[i] = NULL;
++	}
 +
-+/* return total length of buffer chain */
-+uint
-+pkttotlen(void *drv, void *p)
-+{
-+	uint total;
++	di->txin = i;
 +
-+	total = 0;
-+	for (; p; p = PKTNEXT(drv, p))
-+		total += PKTLEN(drv, p);
-+	return (total);
-+}
++	/* tx flow control */
++	di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
 +
++	return (txp);
 +
-+uchar*
-+bcm_ether_ntoa(char *ea, char *buf)
-+{
-+	sprintf(buf,"%02x:%02x:%02x:%02x:%02x:%02x",
-+		(uchar)ea[0]&0xff, (uchar)ea[1]&0xff, (uchar)ea[2]&0xff,
-+		(uchar)ea[3]&0xff, (uchar)ea[4]&0xff, (uchar)ea[5]&0xff);
-+	return (buf);
++bogus:
++/*
++	DMA_ERROR(("dma_getnexttxp: bogus curr: start %d end %d txout %d force %d\n",
++		start, end, di->txout, forceall));
++*/
++	return (NULL);
 +}
 +
-+/* parse a xx:xx:xx:xx:xx:xx format ethernet address */
-+int
-+bcm_ether_atoe(char *p, char *ea)
++void
++dma_rxreclaim(dma_info_t *di)
 +{
-+	int i = 0;
++	void *p;
 +
-+	for (;;) {
-+		ea[i++] = (char) bcm_strtoul(p, &p, 16);
-+		if (!*p++ || i == 6)
-+			break;
-+	}
++	DMA_TRACE(("%s: dma_rxreclaim\n", di->name));
 +
-+	return (i == 6);
++	while ((p = dma_getnextrxp(di, TRUE)))
++		PKTFREE(di->drv, p, FALSE);
 +}
 +
-+/* 
-+ * Traverse a string of 1-byte tag/1-byte length/variable-length value 
-+ * triples, returning a pointer to the substring whose first element 
-+ * matches tag.  Stop parsing when we see an element whose ID is greater
-+ * than the target key. 
-+ */
-+bcm_tlv_t *
-+bcm_parse_ordered_tlvs(void *buf, int buflen, uint key)
++void *
++dma_getnextrxp(dma_info_t *di, bool forceall)
 +{
-+	bcm_tlv_t *elt;
-+	int totlen;
-+
-+	elt = (bcm_tlv_t*)buf;
-+	totlen = buflen;
-+
-+	/* find tagged parameter */
-+	while (totlen >= 2) {
-+		uint id = elt->id;
-+		int len = elt->len;
-+		
-+		/* Punt if we start seeing IDs > than target key */
-+		if (id > key)
-+			return(NULL);
++	uint i;
++	void *rxp;
 +
-+		/* validate remaining totlen */
-+		if ((id == key) && (totlen >= (len + 2)))
-+			return (elt);
++	/* if forcing, dma engine must be disabled */
++	ASSERT(!forceall || !dma_rxenabled(di));
 +
-+		elt = (bcm_tlv_t*)((uint8*)elt + (len + 2));
-+		totlen -= (len + 2);
-+	}
-+	return NULL;
-+}
++	i = di->rxin;
 +
++	/* return if no packets posted */
++	if (i == di->rxout)
++		return (NULL);
 +
-+/* 
-+ * Traverse a string of 1-byte tag/1-byte length/variable-length value 
-+ * triples, returning a pointer to the substring whose first element 
-+ * matches tag
-+ */
-+bcm_tlv_t *
-+bcm_parse_tlvs(void *buf, int buflen, uint key)
-+{
-+	bcm_tlv_t *elt;
-+	int totlen;
++	/* ignore curr if forceall */
++	if (!forceall && (i == B2I(R_REG(&di->regs->rcvstatus) & RS_CD_MASK)))
++		return (NULL);
 +
-+	elt = (bcm_tlv_t*)buf;
-+	totlen = buflen;
++	/* get the packet pointer that corresponds to the rx descriptor */
++	rxp = di->rxp[i];
++	ASSERT(rxp);
++	di->rxp[i] = NULL;
 +
-+	/* find tagged parameter */
-+	while (totlen >= 2) {
-+		int len = elt->len;
++	/* clear this packet from the descriptor ring */
++	DMA_UNMAP(di->dev, (BUS_SWAP32(R_SM(&di->rxd[i].addr)) - di->dataoffset),
++		  di->rxbufsize, DMA_RX, rxp);
++	W_SM(&di->rxd[i].addr, 0xdeadbeef);
 +
-+		/* validate remaining totlen */
-+		if ((elt->id == key) && (totlen >= (len + 2)))
-+			return (elt);
++	di->rxin = NEXTRXD(i);
 +
-+		elt = (bcm_tlv_t*)((uint8*)elt + (len + 2));
-+		totlen -= (len + 2);
-+	}
-+	
-+	return NULL;
++	return (rxp);
 +}
 +
-+void
-+pktqinit(struct pktq *q, int maxlen)
++char*
++dma_dumptx(dma_info_t *di, char *buf)
 +{
-+	q->head = q->tail = NULL;
-+	q->maxlen = maxlen;
-+	q->len = 0;
++	buf += sprintf(buf, "txd 0x%lx txdpa 0x%lx txp 0x%lx txin %d txout %d txavail %d\n",
++		(ulong)di->txd, di->txdpa, (ulong)di->txp, di->txin, di->txout, di->txavail);
++	buf += sprintf(buf, "xmtcontrol 0x%x xmtaddr 0x%x xmtptr 0x%x xmtstatus 0x%x\n",
++		R_REG(&di->regs->xmtcontrol),
++		R_REG(&di->regs->xmtaddr),
++		R_REG(&di->regs->xmtptr),
++		R_REG(&di->regs->xmtstatus));
++	return (buf);
 +}
 +
-+void
-+pktenq(struct pktq *q, void *p, bool lifo)
++char*
++dma_dumprx(dma_info_t *di, char *buf)
 +{
-+	ASSERT(PKTLINK(p) == NULL);
++	buf += sprintf(buf, "rxd 0x%lx rxdpa 0x%lx rxp 0x%lx rxin %d rxout %d\n",
++		(ulong)di->rxd, di->rxdpa, (ulong)di->rxp, di->rxin, di->rxout);
++	buf += sprintf(buf, "rcvcontrol 0x%x rcvaddr 0x%x rcvptr 0x%x rcvstatus 0x%x\n",
++		R_REG(&di->regs->rcvcontrol),
++		R_REG(&di->regs->rcvaddr),
++		R_REG(&di->regs->rcvptr),
++		R_REG(&di->regs->rcvstatus));
++	return (buf);
++}
 +
-+	PKTSETLINK(p, NULL);
++char*
++dma_dump(dma_info_t *di, char *buf)
++{
++	buf = dma_dumptx(di, buf);
++	buf = dma_dumprx(di, buf);
++	return (buf);
++}
 +
-+	if (q->tail == NULL) {
-+		ASSERT(q->head == NULL);
-+		q->head = q->tail = p;
-+	}
++uint
++dma_getvar(dma_info_t *di, char *name)
++{
++	if (!strcmp(name, "&txavail"))
++		return ((uint) &di->txavail);
 +	else {
-+		ASSERT(q->head);
-+		ASSERT(PKTLINK(q->tail) == NULL);
-+		if (lifo) {
-+			PKTSETLINK(p, q->head);
-+			q->head = p;
-+		} else {
-+			PKTSETLINK(q->tail, p);
-+			q->tail = p;
-+		}
++		ASSERT(0);
 +	}
-+	q->len++;
++	return (0);
 +}
 +
-+void*
-+pktdeq(struct pktq *q)
++void
++dma_txblock(dma_info_t *di)
 +{
-+	void *p;
-+
-+	if ((p = q->head)) {
-+		ASSERT(q->tail);
-+		q->head = PKTLINK(p);
-+		PKTSETLINK(p, NULL);
-+		q->len--;
-+		if (q->head == NULL)
-+			q->tail = NULL;
-+	}
-+	else {
-+		ASSERT(q->tail == NULL);
-+	}
++	di->txavail = 0;
++}
 +
-+	return (p);
++void
++dma_txunblock(dma_info_t *di)
++{
++	di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
 +}
 +
-+/*******************************************************************************
-+ * crc8
-+ *
-+ * Computes a crc8 over the input data using the polynomial:
-+ *
-+ *       x^8 + x^7 +x^6 + x^4 + x^2 + 1
-+ *
-+ * The caller provides the initial value (either CRC8_INIT_VALUE
-+ * or the previous returned value) to allow for processing of 
-+ * discontiguous blocks of data.  When generating the CRC the
-+ * caller is responsible for complementing the final return value
-+ * and inserting it into the byte stream.  When checking, a final
-+ * return value of CRC8_GOOD_VALUE indicates a valid CRC.
++uint
++dma_txactive(dma_info_t *di)
++{
++	return (NTXDACTIVE(di->txin, di->txout));
++}
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/linux_osl.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/linux_osl.c
+--- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/linux_osl.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/linux_osl.c	2005-09-16 10:29:18.166593160 +0200
+@@ -0,0 +1,420 @@
++/*
++ * Linux OS Independent Layer
 + *
-+ * Reference: Dallas Semiconductor Application Note 27
-+ *   Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms", 
-+ *     ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
-+ *     ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ * 
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
 + *
-+ ******************************************************************************/
++ * $Id: linux_osl.c,v 1.2 2005/02/28 13:34:25 jolt Exp $
++ */
 +
-+static uint8 crc8_table[256] = {
-+    0x00, 0xF7, 0xB9, 0x4E, 0x25, 0xD2, 0x9C, 0x6B,
-+    0x4A, 0xBD, 0xF3, 0x04, 0x6F, 0x98, 0xD6, 0x21,
-+    0x94, 0x63, 0x2D, 0xDA, 0xB1, 0x46, 0x08, 0xFF,
-+    0xDE, 0x29, 0x67, 0x90, 0xFB, 0x0C, 0x42, 0xB5,
-+    0x7F, 0x88, 0xC6, 0x31, 0x5A, 0xAD, 0xE3, 0x14,
-+    0x35, 0xC2, 0x8C, 0x7B, 0x10, 0xE7, 0xA9, 0x5E,
-+    0xEB, 0x1C, 0x52, 0xA5, 0xCE, 0x39, 0x77, 0x80,
-+    0xA1, 0x56, 0x18, 0xEF, 0x84, 0x73, 0x3D, 0xCA,
-+    0xFE, 0x09, 0x47, 0xB0, 0xDB, 0x2C, 0x62, 0x95,
-+    0xB4, 0x43, 0x0D, 0xFA, 0x91, 0x66, 0x28, 0xDF,
-+    0x6A, 0x9D, 0xD3, 0x24, 0x4F, 0xB8, 0xF6, 0x01,
-+    0x20, 0xD7, 0x99, 0x6E, 0x05, 0xF2, 0xBC, 0x4B,
-+    0x81, 0x76, 0x38, 0xCF, 0xA4, 0x53, 0x1D, 0xEA,
-+    0xCB, 0x3C, 0x72, 0x85, 0xEE, 0x19, 0x57, 0xA0,
-+    0x15, 0xE2, 0xAC, 0x5B, 0x30, 0xC7, 0x89, 0x7E,
-+    0x5F, 0xA8, 0xE6, 0x11, 0x7A, 0x8D, 0xC3, 0x34,
-+    0xAB, 0x5C, 0x12, 0xE5, 0x8E, 0x79, 0x37, 0xC0,
-+    0xE1, 0x16, 0x58, 0xAF, 0xC4, 0x33, 0x7D, 0x8A,
-+    0x3F, 0xC8, 0x86, 0x71, 0x1A, 0xED, 0xA3, 0x54,
-+    0x75, 0x82, 0xCC, 0x3B, 0x50, 0xA7, 0xE9, 0x1E,
-+    0xD4, 0x23, 0x6D, 0x9A, 0xF1, 0x06, 0x48, 0xBF,
-+    0x9E, 0x69, 0x27, 0xD0, 0xBB, 0x4C, 0x02, 0xF5,
-+    0x40, 0xB7, 0xF9, 0x0E, 0x65, 0x92, 0xDC, 0x2B,
-+    0x0A, 0xFD, 0xB3, 0x44, 0x2F, 0xD8, 0x96, 0x61,
-+    0x55, 0xA2, 0xEC, 0x1B, 0x70, 0x87, 0xC9, 0x3E,
-+    0x1F, 0xE8, 0xA6, 0x51, 0x3A, 0xCD, 0x83, 0x74,
-+    0xC1, 0x36, 0x78, 0x8F, 0xE4, 0x13, 0x5D, 0xAA,
-+    0x8B, 0x7C, 0x32, 0xC5, 0xAE, 0x59, 0x17, 0xE0,
-+    0x2A, 0xDD, 0x93, 0x64, 0x0F, 0xF8, 0xB6, 0x41,
-+    0x60, 0x97, 0xD9, 0x2E, 0x45, 0xB2, 0xFC, 0x0B,
-+    0xBE, 0x49, 0x07, 0xF0, 0x9B, 0x6C, 0x22, 0xD5,
-+    0xF4, 0x03, 0x4D, 0xBA, 0xD1, 0x26, 0x68, 0x9F
-+};
++#define LINUX_OSL
 +
-+/*
-+ * Search the name=value vars for a specific one and return its value.
-+ * Returns NULL if not found.
-+ */
-+char*
-+getvar(char *vars, char *name)
++#include <typedefs.h>
++#include <bcmendian.h>
++#include <linuxver.h>
++#include <linux_osl.h>
++#include <bcmutils.h>
++#include <linux/delay.h>
++#ifdef mips
++#include <asm/paccess.h>
++#endif
++#include <pcicfg.h>
++
++#define PCI_CFG_RETRY 10	
++
++void*
++osl_pktget(void *drv, uint len, bool send)
 +{
-+	char *s;
-+	int len;
++	struct sk_buff *skb;
 +
-+	len = strlen(name);
++	if ((skb = dev_alloc_skb(len)) == NULL)
++		return (NULL);
 +
-+	/* first look in vars[] */
-+	for (s = vars; s && *s; ) {
-+		if ((bcmp(s, name, len) == 0) && (s[len] == '='))
-+			return (&s[len+1]);
++	skb_put(skb, len);
 +
-+		while (*s++)
-+			;
-+	}
++	/* ensure the cookie field is cleared */ 
++	PKTSETCOOKIE(skb, NULL);
 +
-+	/* then query nvram */
-+	return (nvram_get(name));
++	return ((void*) skb);
 +}
 +
-+/*
-+ * Search the vars for a specific one and return its value as
-+ * an integer. Returns 0 if not found.
-+ */
-+int
-+getintvar(char *vars, char *name)
++void
++osl_pktfree(void *p)
 +{
-+	char *val;
++	struct sk_buff *skb, *nskb;
 +
-+	if ((val = getvar(vars, name)) == NULL)
-+		return (0);
++	skb = (struct sk_buff*) p;
 +
-+	return (bcm_strtoul(val, NULL, 0));
++	/* perversion: we use skb->next to chain multi-skb packets */
++	while (skb) {
++		nskb = skb->next;
++		skb->next = NULL;
++		if (skb->destructor) {
++			/* cannot kfree_skb() on hard IRQ (net/core/skbuff.c) if destructor exists */
++			dev_kfree_skb_any(skb);
++		} else {
++			/* can free immediately (even in_irq()) if destructor does not exist */
++			dev_kfree_skb(skb);
++		}
++		skb = nskb;
++	}
 +}
 +
-+void
-+bcm_mdelay(uint ms)
++uint32
++osl_pci_read_config(void *loc, uint offset, uint size)
 +{
-+	uint i;
++	struct pci_dev *pdev;
++	uint val;
++	uint retry=PCI_CFG_RETRY;	 
 +
-+	for (i = 0; i < ms; i++) {
-+		OSL_DELAY(1000);
-+	}
-+}
++	/* only 4byte access supported */
++	ASSERT(size == 4);
 +
-+#define CRC_INNER_LOOP(n, c, x) \
-+    (c) = ((c) >> 8) ^ crc##n##_table[((c) ^ (x)) & 0xff]
++	pdev = (struct pci_dev*)loc;
++	do {
++		pci_read_config_dword(pdev, offset, &val);
++		if (val != 0xffffffff)
++			break;
++	} while (retry--);
 +
-+uint8
-+crc8(
-+	uint8 *pdata,	/* pointer to array of data to process */
-+	uint  nbytes,	/* number of input data bytes to process */
-+	uint8 crc	/* either CRC8_INIT_VALUE or previous return value */
-+)
-+{
-+	/* hard code the crc loop instead of using CRC_INNER_LOOP macro
-+	 * to avoid the undefined and unnecessary (uint8 >> 8) operation. */
-+	while (nbytes-- > 0)
-+		crc = crc8_table[(crc ^ *pdata++) & 0xff];
 +
-+	return crc;
++	return (val);
 +}
 +
-+/*******************************************************************************
-+ * crc16
-+ *
-+ * Computes a crc16 over the input data using the polynomial:
-+ *
-+ *       x^16 + x^12 +x^5 + 1
-+ *
-+ * The caller provides the initial value (either CRC16_INIT_VALUE
-+ * or the previous returned value) to allow for processing of 
-+ * discontiguous blocks of data.  When generating the CRC the
-+ * caller is responsible for complementing the final return value
-+ * and inserting it into the byte stream.  When checking, a final
-+ * return value of CRC16_GOOD_VALUE indicates a valid CRC.
-+ *
-+ * Reference: Dallas Semiconductor Application Note 27
-+ *   Williams, Ross N., "A Painless Guide to CRC Error Detection Algorithms", 
-+ *     ver 3, Aug 1993, ross@guest.adelaide.edu.au, Rocksoft Pty Ltd.,
-+ *     ftp://ftp.rocksoft.com/clients/rocksoft/papers/crc_v3.txt
-+ *
-+ ******************************************************************************/
++void
++osl_pci_write_config(void *loc, uint offset, uint size, uint val)
++{
++	struct pci_dev *pdev;
++	uint retry=PCI_CFG_RETRY;	 
 +
-+static uint16 crc16_table[256] = {
-+    0x0000, 0x1189, 0x2312, 0x329B, 0x4624, 0x57AD, 0x6536, 0x74BF,
-+    0x8C48, 0x9DC1, 0xAF5A, 0xBED3, 0xCA6C, 0xDBE5, 0xE97E, 0xF8F7,
-+    0x1081, 0x0108, 0x3393, 0x221A, 0x56A5, 0x472C, 0x75B7, 0x643E,
-+    0x9CC9, 0x8D40, 0xBFDB, 0xAE52, 0xDAED, 0xCB64, 0xF9FF, 0xE876,
-+    0x2102, 0x308B, 0x0210, 0x1399, 0x6726, 0x76AF, 0x4434, 0x55BD,
-+    0xAD4A, 0xBCC3, 0x8E58, 0x9FD1, 0xEB6E, 0xFAE7, 0xC87C, 0xD9F5,
-+    0x3183, 0x200A, 0x1291, 0x0318, 0x77A7, 0x662E, 0x54B5, 0x453C,
-+    0xBDCB, 0xAC42, 0x9ED9, 0x8F50, 0xFBEF, 0xEA66, 0xD8FD, 0xC974,
-+    0x4204, 0x538D, 0x6116, 0x709F, 0x0420, 0x15A9, 0x2732, 0x36BB,
-+    0xCE4C, 0xDFC5, 0xED5E, 0xFCD7, 0x8868, 0x99E1, 0xAB7A, 0xBAF3,
-+    0x5285, 0x430C, 0x7197, 0x601E, 0x14A1, 0x0528, 0x37B3, 0x263A,
-+    0xDECD, 0xCF44, 0xFDDF, 0xEC56, 0x98E9, 0x8960, 0xBBFB, 0xAA72,
-+    0x6306, 0x728F, 0x4014, 0x519D, 0x2522, 0x34AB, 0x0630, 0x17B9,
-+    0xEF4E, 0xFEC7, 0xCC5C, 0xDDD5, 0xA96A, 0xB8E3, 0x8A78, 0x9BF1,
-+    0x7387, 0x620E, 0x5095, 0x411C, 0x35A3, 0x242A, 0x16B1, 0x0738,
-+    0xFFCF, 0xEE46, 0xDCDD, 0xCD54, 0xB9EB, 0xA862, 0x9AF9, 0x8B70,
-+    0x8408, 0x9581, 0xA71A, 0xB693, 0xC22C, 0xD3A5, 0xE13E, 0xF0B7,
-+    0x0840, 0x19C9, 0x2B52, 0x3ADB, 0x4E64, 0x5FED, 0x6D76, 0x7CFF,
-+    0x9489, 0x8500, 0xB79B, 0xA612, 0xD2AD, 0xC324, 0xF1BF, 0xE036,
-+    0x18C1, 0x0948, 0x3BD3, 0x2A5A, 0x5EE5, 0x4F6C, 0x7DF7, 0x6C7E,
-+    0xA50A, 0xB483, 0x8618, 0x9791, 0xE32E, 0xF2A7, 0xC03C, 0xD1B5,
-+    0x2942, 0x38CB, 0x0A50, 0x1BD9, 0x6F66, 0x7EEF, 0x4C74, 0x5DFD,
-+    0xB58B, 0xA402, 0x9699, 0x8710, 0xF3AF, 0xE226, 0xD0BD, 0xC134,
-+    0x39C3, 0x284A, 0x1AD1, 0x0B58, 0x7FE7, 0x6E6E, 0x5CF5, 0x4D7C,
-+    0xC60C, 0xD785, 0xE51E, 0xF497, 0x8028, 0x91A1, 0xA33A, 0xB2B3,
-+    0x4A44, 0x5BCD, 0x6956, 0x78DF, 0x0C60, 0x1DE9, 0x2F72, 0x3EFB,
-+    0xD68D, 0xC704, 0xF59F, 0xE416, 0x90A9, 0x8120, 0xB3BB, 0xA232,
-+    0x5AC5, 0x4B4C, 0x79D7, 0x685E, 0x1CE1, 0x0D68, 0x3FF3, 0x2E7A,
-+    0xE70E, 0xF687, 0xC41C, 0xD595, 0xA12A, 0xB0A3, 0x8238, 0x93B1,
-+    0x6B46, 0x7ACF, 0x4854, 0x59DD, 0x2D62, 0x3CEB, 0x0E70, 0x1FF9,
-+    0xF78F, 0xE606, 0xD49D, 0xC514, 0xB1AB, 0xA022, 0x92B9, 0x8330,
-+    0x7BC7, 0x6A4E, 0x58D5, 0x495C, 0x3DE3, 0x2C6A, 0x1EF1, 0x0F78
-+};
++	/* only 4byte access supported */
++	ASSERT(size == 4);
 +
-+uint16
-+crc16(
-+    uint8 *pdata,  /* pointer to array of data to process */
-+    uint nbytes, /* number of input data bytes to process */
-+    uint16 crc     /* either CRC16_INIT_VALUE or previous return value */
-+)
-+{
-+    while (nbytes-- > 0)
-+        CRC_INNER_LOOP(16, crc, *pdata++);
-+    return crc;
-+}
++	pdev = (struct pci_dev*)loc;
 +
-+static uint32 crc32_table[256] = {
-+    0x00000000, 0x77073096, 0xEE0E612C, 0x990951BA,
-+    0x076DC419, 0x706AF48F, 0xE963A535, 0x9E6495A3,
-+    0x0EDB8832, 0x79DCB8A4, 0xE0D5E91E, 0x97D2D988,
-+    0x09B64C2B, 0x7EB17CBD, 0xE7B82D07, 0x90BF1D91,
-+    0x1DB71064, 0x6AB020F2, 0xF3B97148, 0x84BE41DE,
-+    0x1ADAD47D, 0x6DDDE4EB, 0xF4D4B551, 0x83D385C7,
-+    0x136C9856, 0x646BA8C0, 0xFD62F97A, 0x8A65C9EC,
-+    0x14015C4F, 0x63066CD9, 0xFA0F3D63, 0x8D080DF5,
-+    0x3B6E20C8, 0x4C69105E, 0xD56041E4, 0xA2677172,
-+    0x3C03E4D1, 0x4B04D447, 0xD20D85FD, 0xA50AB56B,
-+    0x35B5A8FA, 0x42B2986C, 0xDBBBC9D6, 0xACBCF940,
-+    0x32D86CE3, 0x45DF5C75, 0xDCD60DCF, 0xABD13D59,
-+    0x26D930AC, 0x51DE003A, 0xC8D75180, 0xBFD06116,
-+    0x21B4F4B5, 0x56B3C423, 0xCFBA9599, 0xB8BDA50F,
-+    0x2802B89E, 0x5F058808, 0xC60CD9B2, 0xB10BE924,
-+    0x2F6F7C87, 0x58684C11, 0xC1611DAB, 0xB6662D3D,
-+    0x76DC4190, 0x01DB7106, 0x98D220BC, 0xEFD5102A,
-+    0x71B18589, 0x06B6B51F, 0x9FBFE4A5, 0xE8B8D433,
-+    0x7807C9A2, 0x0F00F934, 0x9609A88E, 0xE10E9818,
-+    0x7F6A0DBB, 0x086D3D2D, 0x91646C97, 0xE6635C01,
-+    0x6B6B51F4, 0x1C6C6162, 0x856530D8, 0xF262004E,
-+    0x6C0695ED, 0x1B01A57B, 0x8208F4C1, 0xF50FC457,
-+    0x65B0D9C6, 0x12B7E950, 0x8BBEB8EA, 0xFCB9887C,
-+    0x62DD1DDF, 0x15DA2D49, 0x8CD37CF3, 0xFBD44C65,
-+    0x4DB26158, 0x3AB551CE, 0xA3BC0074, 0xD4BB30E2,
-+    0x4ADFA541, 0x3DD895D7, 0xA4D1C46D, 0xD3D6F4FB,
-+    0x4369E96A, 0x346ED9FC, 0xAD678846, 0xDA60B8D0,
-+    0x44042D73, 0x33031DE5, 0xAA0A4C5F, 0xDD0D7CC9,
-+    0x5005713C, 0x270241AA, 0xBE0B1010, 0xC90C2086,
-+    0x5768B525, 0x206F85B3, 0xB966D409, 0xCE61E49F,
-+    0x5EDEF90E, 0x29D9C998, 0xB0D09822, 0xC7D7A8B4,
-+    0x59B33D17, 0x2EB40D81, 0xB7BD5C3B, 0xC0BA6CAD,
-+    0xEDB88320, 0x9ABFB3B6, 0x03B6E20C, 0x74B1D29A,
-+    0xEAD54739, 0x9DD277AF, 0x04DB2615, 0x73DC1683,
-+    0xE3630B12, 0x94643B84, 0x0D6D6A3E, 0x7A6A5AA8,
-+    0xE40ECF0B, 0x9309FF9D, 0x0A00AE27, 0x7D079EB1,
-+    0xF00F9344, 0x8708A3D2, 0x1E01F268, 0x6906C2FE,
-+    0xF762575D, 0x806567CB, 0x196C3671, 0x6E6B06E7,
-+    0xFED41B76, 0x89D32BE0, 0x10DA7A5A, 0x67DD4ACC,
-+    0xF9B9DF6F, 0x8EBEEFF9, 0x17B7BE43, 0x60B08ED5,
-+    0xD6D6A3E8, 0xA1D1937E, 0x38D8C2C4, 0x4FDFF252,
-+    0xD1BB67F1, 0xA6BC5767, 0x3FB506DD, 0x48B2364B,
-+    0xD80D2BDA, 0xAF0A1B4C, 0x36034AF6, 0x41047A60,
-+    0xDF60EFC3, 0xA867DF55, 0x316E8EEF, 0x4669BE79,
-+    0xCB61B38C, 0xBC66831A, 0x256FD2A0, 0x5268E236,
-+    0xCC0C7795, 0xBB0B4703, 0x220216B9, 0x5505262F,
-+    0xC5BA3BBE, 0xB2BD0B28, 0x2BB45A92, 0x5CB36A04,
-+    0xC2D7FFA7, 0xB5D0CF31, 0x2CD99E8B, 0x5BDEAE1D,
-+    0x9B64C2B0, 0xEC63F226, 0x756AA39C, 0x026D930A,
-+    0x9C0906A9, 0xEB0E363F, 0x72076785, 0x05005713,
-+    0x95BF4A82, 0xE2B87A14, 0x7BB12BAE, 0x0CB61B38,
-+    0x92D28E9B, 0xE5D5BE0D, 0x7CDCEFB7, 0x0BDBDF21,
-+    0x86D3D2D4, 0xF1D4E242, 0x68DDB3F8, 0x1FDA836E,
-+    0x81BE16CD, 0xF6B9265B, 0x6FB077E1, 0x18B74777,
-+    0x88085AE6, 0xFF0F6A70, 0x66063BCA, 0x11010B5C,
-+    0x8F659EFF, 0xF862AE69, 0x616BFFD3, 0x166CCF45,
-+    0xA00AE278, 0xD70DD2EE, 0x4E048354, 0x3903B3C2,
-+    0xA7672661, 0xD06016F7, 0x4969474D, 0x3E6E77DB,
-+    0xAED16A4A, 0xD9D65ADC, 0x40DF0B66, 0x37D83BF0,
-+    0xA9BCAE53, 0xDEBB9EC5, 0x47B2CF7F, 0x30B5FFE9,
-+    0xBDBDF21C, 0xCABAC28A, 0x53B39330, 0x24B4A3A6,
-+    0xBAD03605, 0xCDD70693, 0x54DE5729, 0x23D967BF,
-+    0xB3667A2E, 0xC4614AB8, 0x5D681B02, 0x2A6F2B94,
-+    0xB40BBE37, 0xC30C8EA1, 0x5A05DF1B, 0x2D02EF8D
-+};
++	do {
++		pci_write_config_dword(pdev, offset, val);
++		if (offset!=PCI_BAR0_WIN)
++			break;
++		if (osl_pci_read_config(loc,offset,size) == val) 
++			break;
++	} while (retry--);
 +
-+uint32
-+crc32(
-+    uint8 *pdata,  /* pointer to array of data to process */
-+    uint   nbytes, /* number of input data bytes to process */
-+    uint32 crc     /* either CRC32_INIT_VALUE or previous return value */
-+)
++}
++
++void
++osl_pcmcia_read_attr(void *osh, uint offset, void *buf, int size)
 +{
-+    uint8 *pend;
-+#ifdef __mips__
-+    uint8 tmp[4];
-+    ulong *tptr = (ulong *)tmp;
++	ASSERT(0);
++}
 +
-+	/* in case the beginning of the buffer isn't aligned */
-+	pend = (uint8 *)((uint)(pdata + 3) & 0xfffffffc);
-+	nbytes -= (pend - pdata);
-+	while (pdata < pend)
-+		CRC_INNER_LOOP(32, crc, *pdata++);
++void
++osl_pcmcia_write_attr(void *osh, uint offset, void *buf, int size)
++{
++	ASSERT(0);
++}
 +
-+    /* handle bulk of data as 32-bit words */
-+    pend = pdata + (nbytes & 0xfffffffc);
-+    while (pdata < pend) {
-+	*tptr = *((ulong *)pdata)++;
-+        CRC_INNER_LOOP(32, crc, tmp[0]);
-+        CRC_INNER_LOOP(32, crc, tmp[1]);
-+        CRC_INNER_LOOP(32, crc, tmp[2]);
-+        CRC_INNER_LOOP(32, crc, tmp[3]);
-+    }
++void
++osl_assert(char *exp, char *file, int line)
++{
++	char tempbuf[255];
 +
-+    /* 1-3 bytes at end of buffer */
-+    pend = pdata + (nbytes & 0x03);
-+    while (pdata < pend)
-+        CRC_INNER_LOOP(32, crc, *pdata++);
-+#else
-+    pend = pdata + nbytes;
-+    while (pdata < pend)
-+        CRC_INNER_LOOP(32, crc, *pdata++);
-+#endif
-+       
-+    return crc;
++	sprintf(tempbuf, "assertion \"%s\" failed: file \"%s\", line %d\n", exp, file, line);
++	panic(tempbuf);
 +}
 +
-+#ifdef notdef
-+#define CLEN 	1499
-+#define CBUFSIZ 	(CLEN+4)
-+#define CNBUFS		5
++/*
++ * BINOSL selects the slightly slower function-call-based binary compatible osl.
++ */
++#ifdef BINOSL
 +
-+void testcrc32(void)
++int
++osl_printf(const char *format, ...)
 +{
-+	uint j,k,l;
-+	uint8 *buf;
-+	uint len[CNBUFS];
-+	uint32 crcr;
-+	uint32 crc32tv[CNBUFS] =
-+		{0xd2cb1faa, 0xd385c8fa, 0xf5b4f3f3, 0x55789e20, 0x00343110};
-+
-+	ASSERT((buf = MALLOC(CBUFSIZ*CNBUFS)) != NULL);
++	va_list args;
++	char buf[1024];
++	int len;
 +
-+	/* step through all possible alignments */
-+	for (l=0;l<=4;l++) {
-+		for (j=0; j<CNBUFS; j++) {
-+			len[j] = CLEN;
-+			for (k=0; k<len[j]; k++)
-+				*(buf + j*CBUFSIZ + (k+l)) = (j+k) & 0xff;
-+		}
++	/* sprintf into a local buffer because there *is* no "vprintk()".. */
++	va_start(args, format);
++	len = vsprintf(buf, format, args);
++	va_end(args);
 +
-+		for (j=0; j<CNBUFS; j++) {
-+			crcr = crc32(buf + j*CBUFSIZ + l, len[j], CRC32_INIT_VALUE);
-+			ASSERT(crcr == crc32tv[j]);
-+		}
++	if (len > sizeof (buf)) {
++		printk("osl_printf: buffer overrun\n");
++		return (0);
 +	}
 +
-+	MFREE(buf, CBUFSIZ*CNBUFS);
-+	return;
++	return (printk(buf));
 +}
-+#endif
 +
++int
++osl_sprintf(char *buf, const char *format, ...)
++{
++	va_list args;
++	int rc;
 +
++	va_start(args, format);
++	rc = vsprintf(buf, format, args);
++	va_end(args);
++	return (rc);
++}
 +
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/hnddma.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/hnddma.c
---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/hnddma.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/hnddma.c	2005-08-28 11:12:20.430859152 +0200
-@@ -0,0 +1,763 @@
-+/*
-+ * Generic Broadcom Home Networking Division (HND) DMA module.
-+ * This supports the following chips: BCM42xx, 44xx, 47xx .
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: hnddma.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
-+ */
-+
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <bcmendian.h>
-+#include <bcmutils.h>
-+
-+struct dma_info;	/* forward declaration */
-+#define di_t struct dma_info
-+#include <hnddma.h>
-+
-+/* debug/trace */
-+#define	DMA_ERROR(args)
-+#define	DMA_TRACE(args)
-+
-+/* default dma message level(if input msg_level pointer is null in dma_attach()) */
-+static uint dma_msg_level = 0;
-+
-+#define	MAXNAMEL	8
-+#define	MAXDD		(DMAMAXRINGSZ / sizeof (dmadd_t))
-+
-+/* dma engine software state */
-+typedef struct dma_info {
-+	hnddma_t	hnddma;		/* exported structure */
-+	uint		*msg_level;	/* message level pointer */
-+
-+	char		name[MAXNAMEL];	/* callers name for diag msgs */
-+	void		*drv;		/* driver handle */
-+	void		*dev;		/* device handle */
-+	dmaregs_t	*regs;		/* dma engine registers */
-+
-+	dmadd_t		*txd;		/* pointer to chip-specific tx descriptor ring */
-+	uint		txin;		/* index of next descriptor to reclaim */
-+	uint		txout;		/* index of next descriptor to post */
-+	uint		txavail;	/* # free tx descriptors */
-+	void		*txp[MAXDD];	/* parallel array of pointers to packets */
-+	ulong		txdpa;		/* physical address of descriptor ring */
-+	uint		txdalign;	/* #bytes added to alloc'd mem to align txd */
-+
-+	dmadd_t		*rxd;		/* pointer to chip-specific rx descriptor ring */
-+	uint		rxin;		/* index of next descriptor to reclaim */
-+	uint		rxout;		/* index of next descriptor to post */
-+	void		*rxp[MAXDD];	/* parallel array of pointers to packets */
-+	ulong		rxdpa;		/* physical address of descriptor ring */
-+	uint		rxdalign;	/* #bytes added to alloc'd mem to align rxd */
-+
-+	/* tunables */
-+	uint		ntxd;		/* # tx descriptors */
-+	uint		nrxd;		/* # rx descriptors */
-+	uint		rxbufsize;	/* rx buffer size in bytes */
-+	uint		nrxpost;	/* # rx buffers to keep posted */
-+	uint		rxoffset;	/* rxcontrol offset */
-+	uint		ddoffset;	/* add to get dma address of descriptor ring */
-+	uint		dataoffset;	/* add to get dma address of data buffer */
-+} dma_info_t;
-+
-+/* descriptor bumping macros */
-+#define	NEXTTXD(i)	((i + 1) & (di->ntxd - 1))
-+#define	PREVTXD(i)	((i - 1) & (di->ntxd - 1))
-+#define	NEXTRXD(i)	((i + 1) & (di->nrxd - 1))
-+#define	NTXDACTIVE(h, t)	((t - h) & (di->ntxd - 1))
-+#define	NRXDACTIVE(h, t)	((t - h) & (di->nrxd - 1))
-+
-+/* macros to convert between byte offsets and indexes */
-+#define	B2I(bytes)	((bytes) / sizeof (dmadd_t))
-+#define	I2B(index)	((index) * sizeof (dmadd_t))
-+
-+void*
-+dma_attach(void *drv, void *dev, char *name, dmaregs_t *regs, uint ntxd, uint nrxd,
-+	uint rxbufsize, uint nrxpost, uint rxoffset, uint ddoffset, uint dataoffset, uint *msg_level)
++int
++osl_strcmp(const char *s1, const char *s2)
 +{
-+	dma_info_t *di;
-+	void *va;
-+
-+	ASSERT(ntxd <= MAXDD);
-+	ASSERT(nrxd <= MAXDD);
-+
-+	/* allocate private info structure */
-+	if ((di = MALLOC(sizeof (dma_info_t))) == NULL)
-+		return (NULL);
-+	bzero((char*)di, sizeof (dma_info_t));
-+
-+	/* set message level */
-+	di->msg_level = msg_level ? msg_level : &dma_msg_level;
-+
-+	DMA_TRACE(("%s: dma_attach: drv 0x%x dev 0x%x regs 0x%x ntxd %d nrxd %d rxbufsize %d nrxpost %d rxoffset %d ddoffset 0x%x dataoffset 0x%x\n", name, (uint)drv, (uint)dev, (uint)regs, ntxd, nrxd, rxbufsize, nrxpost, rxoffset, ddoffset, dataoffset));
-+
-+	/* make a private copy of our callers name */
-+	strncpy(di->name, name, MAXNAMEL);
-+	di->name[MAXNAMEL-1] = '\0';
-+
-+	di->drv = drv;
-+	di->dev = dev;
-+	di->regs = regs;
-+
-+	/* allocate transmit descriptor ring */
-+	if (ntxd) {
-+		if ((va = DMA_ALLOC_CONSISTENT(dev, (DMAMAXRINGSZ + DMARINGALIGN), &di->txdpa)) == NULL)
-+			goto fail;
-+		di->txd = (dmadd_t*) ROUNDUP(va, DMARINGALIGN);
-+		di->txdalign = ((uint)di->txd - (uint)va);
-+		di->txdpa = di->txdpa + di->txdalign;
-+		ASSERT(ISALIGNED(di->txd, DMARINGALIGN));
-+	}
-+
-+	/* allocate receive descriptor ring */
-+	if (nrxd) {
-+		if ((va = DMA_ALLOC_CONSISTENT(dev, (DMAMAXRINGSZ + DMARINGALIGN), &di->rxdpa)) == NULL)
-+			goto fail;
-+		di->rxd = (dmadd_t*) ROUNDUP(va, DMARINGALIGN);
-+		di->rxdalign = ((uint)di->rxd - (uint)va);
-+		di->rxdpa = di->rxdpa + di->rxdalign;
-+		ASSERT(ISALIGNED(di->rxd, DMARINGALIGN));
-+	}
-+
-+	/* save tunables */
-+	di->ntxd = ntxd;
-+	di->nrxd = nrxd;
-+	di->rxbufsize = rxbufsize;
-+	di->nrxpost = nrxpost;
-+	di->rxoffset = rxoffset;
-+	di->ddoffset = ddoffset;
-+	di->dataoffset = dataoffset;
-+
-+	return ((void*)di);
-+
-+fail:
-+	dma_detach((void*)di);
-+	return (NULL);
++	return (strcmp(s1, s2));
 +}
 +
-+/* may be called with core in reset */
-+void
-+dma_detach(dma_info_t *di)
++int
++osl_strncmp(const char *s1, const char *s2, uint n)
 +{
-+	if (di == NULL)
-+		return;
-+
-+	DMA_TRACE(("%s: dma_detach\n", di->name));
-+
-+	/* shouldn't be here if descriptors are unreclaimed */
-+	ASSERT(di->txin == di->txout);
-+	ASSERT(di->rxin == di->rxout);
-+
-+	/* free dma descriptor rings */
-+	if (di->txd)
-+		DMA_FREE_CONSISTENT(di->dev, (void *)((uint)di->txd - di->txdalign), (DMAMAXRINGSZ + DMARINGALIGN), di->txdpa);
-+	if (di->rxd)
-+		DMA_FREE_CONSISTENT(di->dev, (void *)((uint)di->rxd - di->rxdalign), (DMAMAXRINGSZ + DMARINGALIGN), di->rxdpa);
-+
-+	/* free our private info structure */
-+	MFREE((void*)di, sizeof (dma_info_t));
++	return (strncmp(s1, s2, n));
 +}
 +
-+
-+void
-+dma_txreset(dma_info_t *di)
++int
++osl_strlen(char *s)
 +{
-+	uint32 status;
-+
-+	DMA_TRACE(("%s: dma_txreset\n", di->name));
-+
-+	/* suspend tx DMA first */
-+	W_REG(&di->regs->xmtcontrol, XC_SE);
-+	SPINWAIT((status = (R_REG(&di->regs->xmtstatus) & XS_XS_MASK)) != XS_XS_DISABLED &&
-+		 status != XS_XS_IDLE &&
-+		 status != XS_XS_STOPPED,
-+		 10000);
-+
-+	W_REG(&di->regs->xmtcontrol, 0);
-+	SPINWAIT((status = (R_REG(&di->regs->xmtstatus) & XS_XS_MASK)) != XS_XS_DISABLED,
-+		 10000);
++	return (strlen(s));
++}
 +
-+	if (status != XS_XS_DISABLED) {
-+		DMA_ERROR(("%s: dma_txreset: dma cannot be stopped\n", di->name));
-+	}
++char*
++osl_strcpy(char *d, const char *s)
++{
++	return (strcpy(d, s));
++}
 +
-+	/* wait for the last transaction to complete */
-+	OSL_DELAY(300);
++char*
++osl_strncpy(char *d, const char *s, uint n)
++{
++	return (strncpy(d, s, n));
 +}
 +
 +void
-+dma_rxreset(dma_info_t *di)
++bcopy(const void *src, void *dst, int len)
 +{
-+	uint32 status;
-+
-+	DMA_TRACE(("%s: dma_rxreset\n", di->name));
-+
-+	W_REG(&di->regs->rcvcontrol, 0);
-+	SPINWAIT((status = (R_REG(&di->regs->rcvstatus) & RS_RS_MASK)) != RS_RS_DISABLED,
-+		 10000);
++	memcpy(dst, src, len);
++}
 +
-+	if (status != RS_RS_DISABLED) {
-+		DMA_ERROR(("%s: dma_rxreset: dma cannot be stopped\n", di->name));
-+	}
++int
++bcmp(const void *b1, const void *b2, int len)
++{
++	return (memcmp(b1, b2, len));
 +}
 +
 +void
-+dma_txinit(dma_info_t *di)
++bzero(void *b, int len)
 +{
-+	DMA_TRACE(("%s: dma_txinit\n", di->name));
-+
-+	di->txin = di->txout = 0;
-+	di->txavail = di->ntxd - 1;
-+
-+	/* clear tx descriptor ring */
-+	BZERO_SM((void*)di->txd, (di->ntxd * sizeof (dmadd_t)));
-+
-+	W_REG(&di->regs->xmtcontrol, XC_XE);
-+	W_REG(&di->regs->xmtaddr, (di->txdpa + di->ddoffset));
++	memset(b, '\0', len);
 +}
 +
-+bool
-+dma_txenabled(dma_info_t *di)
++void*
++osl_malloc(uint size)
 +{
-+	uint32 xc;
-+
-+	/* If the chip is dead, it is not enabled :-) */
-+	xc = R_REG(&di->regs->xmtcontrol);
-+	return ((xc != 0xffffffff) && (xc & XC_XE));
++	return (kmalloc(size, GFP_ATOMIC));
 +}
 +
 +void
-+dma_txsuspend(dma_info_t *di)
++osl_mfree(void *addr, uint size)
 +{
-+	DMA_TRACE(("%s: dma_txsuspend\n", di->name));
-+	OR_REG(&di->regs->xmtcontrol, XC_SE);
++	kfree(addr);
 +}
 +
-+void
-+dma_txresume(dma_info_t *di)
++uint32
++osl_readl(volatile uint32 *r)
 +{
-+	DMA_TRACE(("%s: dma_txresume\n", di->name));
-+	AND_REG(&di->regs->xmtcontrol, ~XC_SE);
++	return (readl(r));
 +}
 +
-+bool
-+dma_txsuspended(dma_info_t *di)
++uint16
++osl_readw(volatile uint16 *r)
 +{
-+	uint32 xc;
-+	uint32 xs;
-+
-+	xc = R_REG(&di->regs->xmtcontrol);
-+	if (xc & XC_SE) {
-+		xs = R_REG(&di->regs->xmtstatus);
-+		return ((xs & XS_XS_MASK) == XS_XS_IDLE);
-+	}
-+	return 0;
++	return (readw(r));
 +}
 +
-+bool
-+dma_txstopped(dma_info_t *di)
++uint8
++osl_readb(volatile uint8 *r)
 +{
-+	return ((R_REG(&di->regs->xmtstatus) & XS_XS_MASK) == XS_XS_STOPPED);
++	return (readb(r));
 +}
 +
-+bool
-+dma_rxstopped(dma_info_t *di)
++void
++osl_writel(uint32 v, volatile uint32 *r)
 +{
-+	return ((R_REG(&di->regs->rcvstatus) & RS_RS_MASK) == RS_RS_STOPPED);
++	writel(v, r);
 +}
 +
 +void
-+dma_fifoloopbackenable(dma_info_t *di)
++osl_writew(uint16 v, volatile uint16 *r)
 +{
-+	DMA_TRACE(("%s: dma_fifoloopbackenable\n", di->name));
-+	OR_REG(&di->regs->xmtcontrol, XC_LE);
++	writew(v, r);
 +}
 +
 +void
-+dma_rxinit(dma_info_t *di)
++osl_writeb(uint8 v, volatile uint8 *r)
 +{
-+	DMA_TRACE(("%s: dma_rxinit\n", di->name));
++	writeb(v, r);
++}
 +
-+	di->rxin = di->rxout = 0;
++void *
++osl_uncached(void *va)
++{
++#ifdef mips
++	return ((void*)KSEG1ADDR(va));
++#else
++	return ((void*)va);
++#endif
++}
 +
-+	/* clear rx descriptor ring */
-+	BZERO_SM((void*)di->rxd, (di->nrxd * sizeof (dmadd_t)));
++uint
++osl_getcycles(void)
++{
++	uint cycles;
 +
-+	dma_rxenable(di);
-+	W_REG(&di->regs->rcvaddr, (di->rxdpa + di->ddoffset));
++#if defined(mips)
++	cycles = read_c0_count() * 2;
++#elif defined(__i386__)
++	rdtscl(cycles);
++#else
++	cycles = 0;
++#endif
++	return cycles;
 +}
 +
-+void
-+dma_rxenable(dma_info_t *di)
++void *
++osl_reg_map(uint32 pa, uint size)
 +{
-+	DMA_TRACE(("%s: dma_rxenable\n", di->name));
-+	W_REG(&di->regs->rcvcontrol, ((di->rxoffset << RC_RO_SHIFT) | RC_RE));
++	return (ioremap_nocache((unsigned long)pa, (unsigned long)size));
 +}
 +
-+bool
-+dma_rxenabled(dma_info_t *di)
++void
++osl_reg_unmap(void *va)
 +{
-+	uint32 rc;
-+
-+	rc = R_REG(&di->regs->rcvcontrol);
-+	return ((rc != 0xffffffff) && (rc & RC_RE));
++	iounmap(va);
 +}
 +
-+/*
-+ * The BCM47XX family supports full 32bit dma engine buffer addressing so
-+ * dma buffers can cross 4 Kbyte page boundaries.
-+ */
 +int
-+dma_txfast(dma_info_t *di, void *p0, uint32 coreflags)
++osl_busprobe(uint32 *val, uint32 addr)
 +{
-+	void *p, *next;
-+	uchar *data;
-+	uint len;
-+	uint txout;
-+	uint32 ctrl;
-+	uint32 pa;
++#ifdef mips
++	return get_dbe(*val, (uint32*)addr);
++#else
++	*val = readl(addr);
++	return 0;
++#endif
++}
 +
-+	DMA_TRACE(("%s: dma_txfast\n", di->name));
++void*
++osl_dma_alloc_consistent(void *dev, uint size, ulong *pap)
++{
++	return (pci_alloc_consistent((struct pci_dev*)dev, size, (dma_addr_t*)pap));
++}
 +
-+	txout = di->txout;
-+	ctrl = 0;
++void
++osl_dma_free_consistent(void *dev, void *va, uint size, ulong pa)
++{
++	pci_free_consistent((struct pci_dev*)dev, size, va, (dma_addr_t)pa);
++}
 +
-+	/*
-+	 * Walk the chain of packet buffers
-+	 * allocating and initializing transmit descriptor entries.
-+	 */
-+	for (p = p0; p; p = next) {
-+		data = PKTDATA(di->drv, p);
-+		len = PKTLEN(di->drv, p);
-+		next = PKTNEXT(di->drv, p);
++uint
++osl_dma_map(void *dev, void *va, uint size, int direction)
++{
++	int dir;
 +
-+		/* return nonzero if out of tx descriptors */
-+		if (NEXTTXD(txout) == di->txin)
-+			goto outoftxd;
++	dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE;
++	return (pci_map_single(dev, va, size, dir));
++}
 +
-+		if (len == 0)
-+			continue;
++void
++osl_dma_unmap(void *dev, uint pa, uint size, int direction)
++{
++	int dir;
 +
-+		/* get physical address of buffer start */
-+		pa = (uint32) DMA_MAP(di->dev, data, len, DMA_TX, p);
++	dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE;
++	pci_unmap_single(dev, (uint32)pa, size, dir);
++}
 +
-+		/* build the descriptor control value */
-+		ctrl = len & CTRL_BC_MASK;
++void
++osl_delay(uint usec)
++{
++	udelay(usec);
++}
 +
-+		ctrl |= coreflags;
-+		
-+		if (p == p0)
-+			ctrl |= CTRL_SOF;
-+		if (next == NULL)
-+			ctrl |= (CTRL_IOC | CTRL_EOF);
-+		if (txout == (di->ntxd - 1))
-+			ctrl |= CTRL_EOT;
++uchar*
++osl_pktdata(void *drv, void *skb)
++{
++	return (((struct sk_buff*)skb)->data);
++}
 +
-+		/* init the tx descriptor */
-+		W_SM(&di->txd[txout].ctrl, BUS_SWAP32(ctrl));
-+		W_SM(&di->txd[txout].addr, BUS_SWAP32(pa + di->dataoffset));
++uint
++osl_pktlen(void *drv, void *skb)
++{
++	return (((struct sk_buff*)skb)->len);
++}
 +
-+		ASSERT(di->txp[txout] == NULL);
++void*
++osl_pktnext(void *drv, void *skb)
++{
++	return (((struct sk_buff*)skb)->next);
++}
 +
-+		txout = NEXTTXD(txout);
-+	}
++void
++osl_pktsetnext(void *skb, void *x)
++{
++	((struct sk_buff*)skb)->next = (struct sk_buff*)x;
++}
 +
-+	/* if last txd eof not set, fix it */
-+	if (!(ctrl & CTRL_EOF))
-+		W_SM(&di->txd[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF));
++void
++osl_pktsetlen(void *drv, void *skb, uint len)
++{
++	__skb_trim((struct sk_buff*)skb, len);
++}
 +
-+	/* save the packet */
-+	di->txp[PREVTXD(txout)] = p0;
++uchar*
++osl_pktpush(void *drv, void *skb, int bytes)
++{
++	return (skb_push((struct sk_buff*)skb, bytes));
++}
 +
-+	/* bump the tx descriptor index */
-+	di->txout = txout;
++uchar*
++osl_pktpull(void *drv, void *skb, int bytes)
++{
++	return (skb_pull((struct sk_buff*)skb, bytes));
++}
 +
-+	/* kick the chip */
-+	W_REG(&di->regs->xmtptr, I2B(txout));
++void*
++osl_pktdup(void *drv, void *skb)
++{
++	return (skb_clone((struct sk_buff*)skb, GFP_ATOMIC));
++}
 +
-+	/* tx flow control */
-+	di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
++void*
++osl_pktcookie(void *skb)
++{
++	return ((void*)((struct sk_buff*)skb)->csum);
++}
 +
-+	return (0);
++void
++osl_pktsetcookie(void *skb, void *x)
++{
++	((struct sk_buff*)skb)->csum = (uint)x;
++}
 +
-+outoftxd:
-+	DMA_ERROR(("%s: dma_txfast: out of txds\n", di->name));
-+	PKTFREE(di->drv, p0, TRUE);
-+	di->txavail = 0;
-+	di->hnddma.txnobuf++;
-+	return (-1);
++void*
++osl_pktlink(void *skb)
++{
++	return (((struct sk_buff*)skb)->prev);
 +}
 +
-+#define	PAGESZ		4096
-+#define	PAGEBASE(x)	((uint)(x) & ~4095)
++void
++osl_pktsetlink(void *skb, void *x)
++{
++	((struct sk_buff*)skb)->prev = (struct sk_buff*)x;
++}
 +
++#endif
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbmips.c
+--- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbmips.c	2005-09-16 10:29:18.168592856 +0200
+@@ -0,0 +1,950 @@
 +/*
-+ * Just like above except go through the extra effort of splitting
-+ * buffers that cross 4Kbyte boundaries into multiple tx descriptors.
++ * BCM47XX Sonics SiliconBackplane MIPS core routines
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ * 
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: sbmips.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
 + */
-+int
-+dma_tx(dma_info_t *di, void *p0, uint32 coreflags)
-+{
-+	void *p, *next;
-+	uchar *data;
-+	uint plen, len;
-+	uchar *page, *start, *end;
-+	uint txout;
-+	uint32 ctrl;
-+	uint32 pa;
 +
-+	DMA_TRACE(("%s: dma_tx\n", di->name));
++#include <typedefs.h>
++#include <osl.h>
++#include <sbutils.h>
++#include <bcmdevs.h>
++#include <bcmnvram.h>
++#include <bcmutils.h>
++#include <hndmips.h>
++#include <sbconfig.h>
++#include <sbextif.h>
++#include <sbchipc.h>
++#include <sbmemc.h>
 +
-+	txout = di->txout;
-+	ctrl = 0;
++/*
++ * Memory segments (32bit kernel mode addresses)
++ */
++#undef KUSEG
++#undef KSEG0
++#undef KSEG1
++#undef KSEG2
++#undef KSEG3
++#define KUSEG		0x00000000
++#define KSEG0		0x80000000
++#define KSEG1		0xa0000000
++#define KSEG2		0xc0000000
++#define KSEG3		0xe0000000
 +
-+	/*
-+	 * Walk the chain of packet buffers
-+	 * splitting those that cross 4 Kbyte boundaries
-+	 * allocating and initializing transmit descriptor entries.
-+	 */
-+	for (p = p0; p; p = next) {
-+		data = PKTDATA(di->drv, p);
-+		plen = PKTLEN(di->drv, p);
-+		next = PKTNEXT(di->drv, p);
++/*
++ * Map an address to a certain kernel segment
++ */
++#undef KSEG0ADDR
++#undef KSEG1ADDR
++#undef KSEG2ADDR
++#undef KSEG3ADDR
++#define KSEG0ADDR(a)		(((a) & 0x1fffffff) | KSEG0)
++#define KSEG1ADDR(a)		(((a) & 0x1fffffff) | KSEG1)
++#define KSEG2ADDR(a)		(((a) & 0x1fffffff) | KSEG2)
++#define KSEG3ADDR(a)		(((a) & 0x1fffffff) | KSEG3)
 +
-+		if (plen == 0)
-+			continue;
++/*
++ * The following macros are especially useful for __asm__
++ * inline assembler.
++ */
++#ifndef __STR
++#define __STR(x) #x
++#endif
++#ifndef STR
++#define STR(x) __STR(x)
++#endif
 +
-+		for (page = (uchar*)PAGEBASE(data);
-+			page <= (uchar*)PAGEBASE(data + plen - 1);
-+			page += PAGESZ) {
++/*  *********************************************************************
++    *  CP0 Registers 
++    ********************************************************************* */
 +
-+			/* return nonzero if out of tx descriptors */
-+			if (NEXTTXD(txout) == di->txin)
-+				goto outoftxd;
++#define C0_INX		0		/* CP0: TLB Index */
++#define C0_RAND		1		/* CP0: TLB Random */
++#define C0_TLBLO0	2		/* CP0: TLB EntryLo0 */
++#define C0_TLBLO	C0_TLBLO0	/* CP0: TLB EntryLo0 */
++#define C0_TLBLO1	3		/* CP0: TLB EntryLo1 */
++#define C0_CTEXT	4		/* CP0: Context */
++#define C0_PGMASK	5		/* CP0: TLB PageMask */
++#define C0_WIRED	6		/* CP0: TLB Wired */
++#define C0_BADVADDR	8		/* CP0: Bad Virtual Address */
++#define C0_COUNT 	9		/* CP0: Count */
++#define C0_TLBHI	10		/* CP0: TLB EntryHi */
++#define C0_COMPARE	11		/* CP0: Compare */
++#define C0_SR		12		/* CP0: Processor Status */
++#define C0_STATUS	C0_SR		/* CP0: Processor Status */
++#define C0_CAUSE	13		/* CP0: Exception Cause */
++#define C0_EPC		14		/* CP0: Exception PC */
++#define C0_PRID		15		/* CP0: Processor Revision Indentifier */
++#define C0_CONFIG	16		/* CP0: Config */
++#define C0_LLADDR	17		/* CP0: LLAddr */
++#define C0_WATCHLO	18		/* CP0: WatchpointLo */
++#define C0_WATCHHI	19		/* CP0: WatchpointHi */
++#define C0_XCTEXT	20		/* CP0: XContext */
++#define C0_DIAGNOSTIC	22		/* CP0: Diagnostic */
++#define C0_BROADCOM	C0_DIAGNOSTIC	/* CP0: Broadcom Register */
++#define C0_ECC		26		/* CP0: ECC */
++#define C0_CACHEERR	27		/* CP0: CacheErr */
++#define C0_TAGLO	28		/* CP0: TagLo */
++#define C0_TAGHI	29		/* CP0: TagHi */
++#define C0_ERREPC	30		/* CP0: ErrorEPC */
 +
-+			start = (page == (uchar*)PAGEBASE(data))?  data: page;
-+			end = (page == (uchar*)PAGEBASE(data + plen))?
-+				(data + plen): (page + PAGESZ);
-+			len = end - start;
++/*
++ * Macros to access the system control coprocessor
++ */
 +
-+			/* build the descriptor control value */
-+			ctrl = len & CTRL_BC_MASK;
++#define MFC0(source, sel)					\
++({								\
++	int __res;						\
++	__asm__ __volatile__(					\
++	".set\tnoreorder\n\t"					\
++	".set\tnoat\n\t"					\
++	".word\t"STR(0x40010000 | ((source)<<11) | (sel))"\n\t"	\
++	"move\t%0,$1\n\t"					\
++	".set\tat\n\t"						\
++	".set\treorder"						\
++	:"=r" (__res)						\
++	:							\
++	:"$1");							\
++	__res;							\
++})
 +
-+			ctrl |= coreflags;
++#define MTC0(source, sel, value)				\
++do {								\
++	__asm__ __volatile__(					\
++	".set\tnoreorder\n\t"					\
++	".set\tnoat\n\t"					\
++	"move\t$1,%z0\n\t"					\
++	".word\t"STR(0x40810000 | ((source)<<11) | (sel))"\n\t"	\
++	".set\tat\n\t"						\
++	".set\treorder"						\
++	:							\
++	:"Jr" (value)						\
++	:"$1");							\
++} while (0)
 +
-+			if ((p == p0) && (start == data))
-+				ctrl |= CTRL_SOF;
-+			if ((next == NULL) && (end == (data + plen)))
-+				ctrl |= (CTRL_IOC | CTRL_EOF);
-+			if (txout == (di->ntxd - 1))
-+				ctrl |= CTRL_EOT;
++/*
++ * R4x00 interrupt enable / cause bits
++ */
++#undef IE_SW0
++#undef IE_SW1
++#undef IE_IRQ0
++#undef IE_IRQ1
++#undef IE_IRQ2
++#undef IE_IRQ3
++#undef IE_IRQ4
++#undef IE_IRQ5
++#define IE_SW0		(1<< 8)
++#define IE_SW1		(1<< 9)
++#define IE_IRQ0		(1<<10)
++#define IE_IRQ1		(1<<11)
++#define IE_IRQ2		(1<<12)
++#define IE_IRQ3		(1<<13)
++#define IE_IRQ4		(1<<14)
++#define IE_IRQ5		(1<<15)
 +
-+			/* get physical address of buffer start */
-+			pa = (uint32) DMA_MAP(di->dev, start, len, DMA_TX, p);
++/*
++ * Bitfields in the R4xx0 cp0 status register
++ */
++#define ST0_IE			0x00000001
++#define ST0_EXL			0x00000002
++#define ST0_ERL			0x00000004
++#define ST0_KSU			0x00000018
++#  define KSU_USER		0x00000010
++#  define KSU_SUPERVISOR	0x00000008
++#  define KSU_KERNEL		0x00000000
++#define ST0_UX			0x00000020
++#define ST0_SX			0x00000040
++#define ST0_KX 			0x00000080
++#define ST0_DE			0x00010000
++#define ST0_CE			0x00020000
 +
-+			/* init the tx descriptor */
-+			W_SM(&di->txd[txout].ctrl, BUS_SWAP32(ctrl));
-+			W_SM(&di->txd[txout].addr, BUS_SWAP32(pa + di->dataoffset));
++/*
++ * Status register bits available in all MIPS CPUs.
++ */
++#define ST0_IM			0x0000ff00
++#define ST0_CH			0x00040000
++#define ST0_SR			0x00100000
++#define ST0_TS			0x00200000
++#define ST0_BEV			0x00400000
++#define ST0_RE			0x02000000
++#define ST0_FR			0x04000000
++#define ST0_CU			0xf0000000
++#define ST0_CU0			0x10000000
++#define ST0_CU1			0x20000000
++#define ST0_CU2			0x40000000
++#define ST0_CU3			0x80000000
++#define ST0_XX			0x80000000	/* MIPS IV naming */
 +
-+			ASSERT(di->txp[txout] == NULL);
++/*
++ * Cache Operations
++ */
 +
-+			txout = NEXTTXD(txout);
-+		}
-+	}
++#ifndef Fill_I
++#define Fill_I			0x14
++#endif
 +
-+	/* if last txd eof not set, fix it */
-+	if (!(ctrl & CTRL_EOF))
-+		W_SM(&di->txd[PREVTXD(txout)].ctrl, BUS_SWAP32(ctrl | CTRL_IOC | CTRL_EOF));
++#define cache_unroll(base,op)			\
++	__asm__ __volatile__("			\
++		.set noreorder;			\
++		.set mips3;			\
++		cache %1, (%0);			\
++		.set mips0;			\
++		.set reorder"			\
++		:				\
++		: "r" (base),			\
++		  "i" (op));
 +
-+	/* save the packet */
-+	di->txp[PREVTXD(txout)] = p0;
++/* 
++ * These are the UART port assignments, expressed as offsets from the base
++ * register.  These assignments should hold for any serial port based on
++ * a 8250, 16450, or 16550(A).
++ */
 +
-+	/* bump the tx descriptor index */
-+	di->txout = txout;
++#define UART_MCR	4	/* Out: Modem Control Register */
++#define UART_MSR	6	/* In:  Modem Status Register */
++#define UART_MCR_LOOP	0x10	/* Enable loopback test mode */
 +
-+	/* kick the chip */
-+	W_REG(&di->regs->xmtptr, I2B(txout));
++/* 
++ * Returns TRUE if an external UART exists at the given base
++ * register.
++ */
++static bool
++serial_exists(uint8 *regs)
++{
++	uint8 save_mcr, status1;
 +
-+	/* tx flow control */
-+	di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
++	save_mcr = R_REG(&regs[UART_MCR]);
++	W_REG(&regs[UART_MCR], UART_MCR_LOOP | 0x0a);
++	status1 = R_REG(&regs[UART_MSR]) & 0xf0;
++	W_REG(&regs[UART_MCR], save_mcr);
 +
-+	return (0);
++	return (status1 == 0x90);
++}
 +
-+outoftxd:
-+	DMA_ERROR(("%s: dma_tx: out of txds\n", di->name));
-+	PKTFREE(di->drv, p0, TRUE);
-+	di->txavail = 0;
-+	di->hnddma.txnobuf++;
-+	return (-1);
-+}
-+
-+/* returns a pointer to the next frame received, or NULL if there are no more */
-+void*
-+dma_rx(dma_info_t *di)
++/* 
++ * Initializes UART access. The callback function will be called once
++ * per found UART.
++*/
++void
++sb_serial_init(void *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift))
 +{
-+	void *p;
-+	uint len;
-+	int skiplen = 0;
++	void *regs;
++	ulong base;
++	uint irq;
++	int i, n;
 +
-+	while ((p = dma_getnextrxp(di, FALSE))) {
-+		/* skip giant packets which span multiple rx descriptors */
-+		if (skiplen > 0) {
-+			skiplen -= di->rxbufsize;
-+			if (skiplen < 0)
-+				skiplen = 0;
-+			PKTFREE(di->drv, p, FALSE);
-+			continue;
++	if ((regs = sb_setcore(sbh, SB_EXTIF, 0))) {
++		extifregs_t *eir = (extifregs_t *) regs;
++		sbconfig_t *sb;
++
++		/* Determine external UART register base */
++		sb = (sbconfig_t *)((ulong) eir + SBCONFIGOFF);
++		base = EXTIF_CFGIF_BASE(sb_base(R_REG(&sb->sbadmatch1)));
++
++		/* Determine IRQ */
++		irq = sb_irq(sbh);
++
++		/* Disable GPIO interrupt initially */
++		W_REG(&eir->gpiointpolarity, 0);
++		W_REG(&eir->gpiointmask, 0);
++
++		/* Search for external UARTs */
++		n = 2;
++		for (i = 0; i < 2; i++) {
++			regs = (void *) REG_MAP(base + (i * 8), 8);
++			if (serial_exists(regs)) {
++				/* Set GPIO 1 to be the external UART IRQ */
++				W_REG(&eir->gpiointmask, 2);
++				if (add)
++					add(regs, irq, 13500000, 0);
++			}
 +		}
 +
-+		len = ltoh16(*(uint16*)(PKTDATA(di->drv, p)));
-+		DMA_TRACE(("%s: dma_rx len %d\n", di->name, len));
++		/* Add internal UART if enabled */
++		if (R_REG(&eir->corecontrol) & CC_UE)
++			if (add)
++				add((void *) &eir->uartdata, irq, sb_clock(sbh), 2);
++	} else if ((regs = sb_setcore(sbh, SB_CC, 0))) {
++		chipcregs_t *cc = (chipcregs_t *) regs;
++		uint32 rev, cap, pll, baud_base, div;
 +
-+		/* bad frame length check */
-+		if (len > (di->rxbufsize - di->rxoffset)) {
-+			DMA_ERROR(("%s: dma_rx: bad frame length (%d)\n", di->name, len));
-+			if (len > 0)
-+				skiplen = len - (di->rxbufsize - di->rxoffset);
-+			PKTFREE(di->drv, p, FALSE);
-+			di->hnddma.rxgiants++;
-+			continue;
++		/* Determine core revision and capabilities */
++		rev = sb_corerev(sbh);
++		cap = R_REG(&cc->capabilities);
++		pll = cap & CAP_PLL_MASK;
++
++		/* Determine IRQ */
++		irq = sb_irq(sbh);
++
++		if (pll == PLL_TYPE1) {
++			/* PLL clock */
++			baud_base = sb_clock_rate(pll,
++						  R_REG(&cc->clockcontrol_n),
++						  R_REG(&cc->clockcontrol_m2));
++			div = 1;
++		} else if (rev >= 3) {
++			/* Internal backplane clock */
++			baud_base = sb_clock_rate(pll,
++						  R_REG(&cc->clockcontrol_n),
++						  R_REG(&cc->clockcontrol_sb));
++			div = 2;	/* Minimum divisor */
++			W_REG(&cc->uart_clkdiv, div);
++		} else {
++			/* Fixed internal backplane clock */
++			baud_base = 88000000;
++			div = 48;
 +		}
 +
-+		/* set actual length */
-+		PKTSETLEN(di->drv, p, (di->rxoffset + len));
++		/* Clock source depends on strapping if UartClkOverride is unset */
++		if ((rev > 0) && ((R_REG(&cc->corecontrol) & CC_UARTCLKO) == 0)) {
++			if ((cap & CAP_UCLKSEL) == CAP_UINTCLK) {
++				/* Internal divided backplane clock */
++				baud_base /= div;
++			} else {
++				/* Assume external clock of 1.8432 MHz */
++				baud_base = 1843200;
++			}
++		}
 +
-+		break;
-+	}
++		/* Add internal UARTs */
++		n = cap & CAP_UARTS_MASK;
++		for (i = 0; i < n; i++) {
++			/* Register offset changed after revision 0 */
++			if (rev)
++				regs = (void *)((ulong) &cc->uart0data + (i * 256));
++			else
++				regs = (void *)((ulong) &cc->uart0data + (i * 8));
 +
-+	return (p);
++			if (add)
++				add(regs, irq, baud_base, 0);
++		}
++	}
 +}
 +
-+/* post receive buffers */
-+void
-+dma_rxfill(dma_info_t *di)
++/* Returns the SB interrupt flag of the current core. */
++uint32
++sb_flag(void *sbh)
 +{
-+	void *p;
-+	uint rxin, rxout;
-+	uint ctrl;
-+	uint n;
-+	uint i;
-+	uint32 pa;
-+	uint rxbufsize;
-+
-+	/*
-+	 * Determine how many receive buffers we're lacking
-+	 * from the full complement, allocate, initialize,
-+	 * and post them, then update the chip rx lastdscr.
-+	 */
-+
-+	rxin = di->rxin;
-+	rxout = di->rxout;
-+	rxbufsize = di->rxbufsize;
++	void *regs;
++	sbconfig_t *sb;
 +
-+	n = di->nrxpost - NRXDACTIVE(rxin, rxout);
++	regs = sb_coreregs(sbh);
++	sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
 +
-+	DMA_TRACE(("%s: dma_rxfill: post %d\n", di->name, n));
++	return (R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK);
++}
 +
-+	for (i = 0; i < n; i++) {
-+		if ((p = PKTGET(di->drv, rxbufsize, FALSE)) == NULL) {
-+			DMA_ERROR(("%s: dma_rxfill: out of rxbufs\n", di->name));
-+			di->hnddma.rxnobuf++;
-+			break;
-+		}
++static const uint32 sbips_int_mask[] = {
++	0,
++	SBIPS_INT1_MASK,
++	SBIPS_INT2_MASK,
++	SBIPS_INT3_MASK,
++	SBIPS_INT4_MASK
++};
 +
-+		*(uint32*)(OSL_UNCACHED(PKTDATA(di->drv, p))) = 0;
++static const uint32 sbips_int_shift[] = {
++	0,
++	0,
++	SBIPS_INT2_SHIFT,
++	SBIPS_INT3_SHIFT,
++	SBIPS_INT4_SHIFT
++};
 +
-+		pa = (uint32) DMA_MAP(di->dev, PKTDATA(di->drv, p), rxbufsize, DMA_RX, p);
-+		ASSERT(ISALIGNED(pa, 4));
++/* 
++ * Returns the MIPS IRQ assignment of the current core. If unassigned,
++ * 0 is returned.
++ */
++uint
++sb_irq(void *sbh)
++{
++	uint idx;
++	void *regs;
++	sbconfig_t *sb;
++	uint32 flag, sbipsflag;
++	uint irq = 0;
 +
-+		/* save the free packet pointer */
-+		ASSERT(di->rxp[rxout] == NULL);
-+		di->rxp[rxout] = p;
++	flag = sb_flag(sbh);
 +
-+		/* prep the descriptor control value */
-+		ctrl = rxbufsize;
-+		if (rxout == (di->nrxd - 1))
-+			ctrl |= CTRL_EOT;
++	idx = sb_coreidx(sbh);
 +
-+		/* init the rx descriptor */
-+		W_SM(&di->rxd[rxout].ctrl, BUS_SWAP32(ctrl));
-+		W_SM(&di->rxd[rxout].addr, BUS_SWAP32(pa + di->dataoffset));
++	if ((regs = sb_setcore(sbh, SB_MIPS, 0)) ||
++	    (regs = sb_setcore(sbh, SB_MIPS33, 0))) {
++		sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
 +
-+		rxout = NEXTRXD(rxout);
++		/* sbipsflag specifies which core is routed to interrupts 1 to 4 */
++		sbipsflag = R_REG(&sb->sbipsflag);
++		for (irq = 1; irq <= 4; irq++) {
++			if (((sbipsflag & sbips_int_mask[irq]) >> sbips_int_shift[irq]) == flag)
++				break;
++		}
++		if (irq == 5)
++			irq = 0;
 +	}
 +
-+	di->rxout = rxout;
++	sb_setcoreidx(sbh, idx);
 +
-+	/* update the chip lastdscr pointer */
-+	W_REG(&di->regs->rcvptr, I2B(rxout));
++	return irq;
 +}
 +
-+void
-+dma_txreclaim(dma_info_t *di, bool forceall)
++/* Clears the specified MIPS IRQ. */
++static void
++sb_clearirq(void *sbh, uint irq)
 +{
-+	void *p;
++	void *regs;
++	sbconfig_t *sb;
 +
-+	DMA_TRACE(("%s: dma_txreclaim %s\n", di->name, forceall ? "all" : ""));
++	if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) &&
++	    !(regs = sb_setcore(sbh, SB_MIPS33, 0)))
++		ASSERT(regs);
++	sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
 +
-+	while ((p = dma_getnexttxp(di, forceall)))
-+		PKTFREE(di->drv, p, TRUE);
++	if (irq == 0)
++		W_REG(&sb->sbintvec, 0);
++	else
++		OR_REG(&sb->sbipsflag, sbips_int_mask[irq]);
 +}
 +
-+/*
-+ * Reclaim next completed txd (txds if using chained buffers) and
-+ * return associated packet.
-+ * If 'force' is true, reclaim txd(s) and return associated packet
-+ * regardless of the value of the hardware "curr" pointer.
++/* 
++ * Assigns the specified MIPS IRQ to the specified core. Shared MIPS
++ * IRQ 0 may be assigned more than once.
 + */
-+void*
-+dma_getnexttxp(dma_info_t *di, bool forceall)
++static void
++sb_setirq(void *sbh, uint irq, uint coreid, uint coreunit)
 +{
-+	uint start, end, i;
-+	void *txp;
-+
-+	DMA_TRACE(("%s: dma_getnexttxp %s\n", di->name, forceall ? "all" : ""));
-+
-+	txp = NULL;
++	void *regs;
++	sbconfig_t *sb;
++	uint32 flag;
 +
-+	start = di->txin;
-+	if (forceall)
-+		end = di->txout;
-+	else
-+		end = B2I(R_REG(&di->regs->xmtstatus) & XS_CD_MASK);
++	regs = sb_setcore(sbh, coreid, coreunit);
++	ASSERT(regs);
++	flag = sb_flag(sbh);
 +
-+	if ((start == 0) && (end > di->txout))
-+		goto bogus;
++	if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) &&
++	    !(regs = sb_setcore(sbh, SB_MIPS33, 0)))
++		ASSERT(regs);
++	sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
 +
-+	for (i = start; i != end && !txp; i = NEXTTXD(i)) {
-+		DMA_UNMAP(di->dev, (BUS_SWAP32(R_SM(&di->txd[i].addr)) - di->dataoffset),
-+			  (BUS_SWAP32(R_SM(&di->txd[i].ctrl)) & CTRL_BC_MASK), DMA_TX, di->txp[i]);
-+		W_SM(&di->txd[i].addr, 0xdeadbeef);
-+		txp = di->txp[i];
-+		di->txp[i] = NULL;
++	if (irq == 0)
++		OR_REG(&sb->sbintvec, 1 << flag);
++	else {
++		flag <<= sbips_int_shift[irq];
++		ASSERT(!(flag & ~sbips_int_mask[irq]));
++		flag |= R_REG(&sb->sbipsflag) & ~sbips_int_mask[irq];
++		W_REG(&sb->sbipsflag, flag);
 +	}
++}	
 +
-+	di->txin = i;
++/* 
++ * Initializes clocks and interrupts. SB and NVRAM access must be
++ * initialized prior to calling.
++ */
++void
++sb_mips_init(void *sbh)
++{
++	ulong hz, ns, tmp;
++	extifregs_t *eir;
++	chipcregs_t *cc;
++	char *value;
++	uint irq;
 +
-+	/* tx flow control */
-+	di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
++	/* Figure out current SB clock speed */
++	if ((hz = sb_clock(sbh)) == 0)
++		hz = 100000000;
++	ns = 1000000000 / hz;
 +
-+	return (txp);
++	/* Setup external interface timing */
++	if ((eir = sb_setcore(sbh, SB_EXTIF, 0))) {
++		/* Initialize extif so we can get to the LEDs and external UART */
++		W_REG(&eir->prog_config, CF_EN);
 +
-+bogus:
-+/*
-+	DMA_ERROR(("dma_getnexttxp: bogus curr: start %d end %d txout %d force %d\n",
-+		start, end, di->txout, forceall));
-+*/
-+	return (NULL);
-+}
++		/* Set timing for the flash */
++		tmp = CEIL(10, ns) << FW_W3_SHIFT;	/* W3 = 10nS */
++		tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */
++		tmp = tmp | CEIL(120, ns);		/* W0 = 120nS */
++		W_REG(&eir->prog_waitcount, tmp);	/* 0x01020a0c for a 100Mhz clock */
 +
-+void
-+dma_rxreclaim(dma_info_t *di)
-+{
-+	void *p;
++		/* Set programmable interface timing for external uart */
++		tmp = CEIL(10, ns) << FW_W3_SHIFT;	/* W3 = 10nS */
++		tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */
++		tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */
++		tmp = tmp | CEIL(120, ns);		/* W0 = 120nS */
++		W_REG(&eir->prog_waitcount, tmp);	/* 0x01020a0c for a 100Mhz clock */
++	} else if ((cc = sb_setcore(sbh, SB_CC, 0))) {
++		/* Set timing for the flash */
++		tmp = CEIL(10, ns) << FW_W3_SHIFT;	/* W3 = 10nS */
++		tmp |= CEIL(10, ns) << FW_W1_SHIFT;	/* W1 = 10nS */
++		tmp |= CEIL(120, ns);			/* W0 = 120nS */
++		W_REG(&cc->parallelflashwaitcnt, tmp);
 +
-+	DMA_TRACE(("%s: dma_rxreclaim\n", di->name));
++		W_REG(&cc->cs01memwaitcnt, tmp);
++	}
 +
-+	while ((p = dma_getnextrxp(di, TRUE)))
-+		PKTFREE(di->drv, p, FALSE);
++	/* Chip specific initialization */
++	switch (sb_chip(sbh)) {
++	case BCM4710_DEVICE_ID:
++		/* Clear interrupt map */
++		for (irq = 0; irq <= 4; irq++)
++			sb_clearirq(sbh, irq);
++		sb_setirq(sbh, 0, SB_CODEC, 0);
++		sb_setirq(sbh, 0, SB_EXTIF, 0);
++		sb_setirq(sbh, 2, SB_ENET, 1);
++		sb_setirq(sbh, 3, SB_ILINE20, 0);
++		sb_setirq(sbh, 4, SB_PCI, 0);
++		ASSERT(eir);
++		value = nvram_get("et0phyaddr");
++		if (value && !strcmp(value, "31")) {
++			/* Enable internal UART */
++			W_REG(&eir->corecontrol, CC_UE);
++			/* Give USB its own interrupt */
++			sb_setirq(sbh, 1, SB_USB, 0);
++		} else {
++			/* Disable internal UART */
++			W_REG(&eir->corecontrol, 0);
++			/* Give Ethernet its own interrupt */
++			sb_setirq(sbh, 1, SB_ENET, 0);
++			sb_setirq(sbh, 0, SB_USB, 0);
++		}
++		break;
++	case BCM4310_DEVICE_ID:
++		MTC0(C0_BROADCOM, 0, MFC0(C0_BROADCOM, 0) & ~(1 << 22));
++		break;
++	}
 +}
 +
-+void *
-+dma_getnextrxp(dma_info_t *di, bool forceall)
++uint32
++sb_mips_clock(void *sbh)
 +{
-+	uint i;
-+	void *rxp;
-+
-+	/* if forcing, dma engine must be disabled */
-+	ASSERT(!forceall || !dma_rxenabled(di));
-+
-+	i = di->rxin;
-+
-+	/* return if no packets posted */
-+	if (i == di->rxout)
-+		return (NULL);
++	extifregs_t *eir;
++	chipcregs_t *cc;
++	uint32 n, m;
++	uint idx;
++	uint32 pll_type, rate = 0;
 +
-+	/* ignore curr if forceall */
-+	if (!forceall && (i == B2I(R_REG(&di->regs->rcvstatus) & RS_CD_MASK)))
-+		return (NULL);
++	/* get index of the current core */
++	idx = sb_coreidx(sbh);
++	pll_type = PLL_TYPE1;
 +
-+	/* get the packet pointer that corresponds to the rx descriptor */
-+	rxp = di->rxp[i];
-+	ASSERT(rxp);
-+	di->rxp[i] = NULL;
++	/* switch to extif or chipc core */
++	if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
++		n = R_REG(&eir->clockcontrol_n);
++		m = R_REG(&eir->clockcontrol_sb);
++	} else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
++		pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK;
++		n = R_REG(&cc->clockcontrol_n);
++		if ((pll_type == PLL_TYPE2) || (pll_type == PLL_TYPE4))
++			m = R_REG(&cc->clockcontrol_mips);
++		else if (pll_type == PLL_TYPE3) {
++			rate = 200000000;
++			goto out;
++		} else
++			m = R_REG(&cc->clockcontrol_sb);
++	} else
++		goto out;
 +
-+	/* clear this packet from the descriptor ring */
-+	DMA_UNMAP(di->dev, (BUS_SWAP32(R_SM(&di->rxd[i].addr)) - di->dataoffset),
-+		  di->rxbufsize, DMA_RX, rxp);
-+	W_SM(&di->rxd[i].addr, 0xdeadbeef);
++	/* calculate rate */
++	rate = sb_clock_rate(pll_type, n, m);
 +
-+	di->rxin = NEXTRXD(i);
++out:
++	/* switch back to previous core */
++	sb_setcoreidx(sbh, idx);
 +
-+	return (rxp);
++	return rate;
 +}
 +
-+char*
-+dma_dumptx(dma_info_t *di, char *buf)
++static void
++icache_probe(int *size, int *lsize)
 +{
-+	buf += sprintf(buf, "txd 0x%lx txdpa 0x%lx txp 0x%lx txin %d txout %d txavail %d\n",
-+		(ulong)di->txd, di->txdpa, (ulong)di->txp, di->txin, di->txout, di->txavail);
-+	buf += sprintf(buf, "xmtcontrol 0x%x xmtaddr 0x%x xmtptr 0x%x xmtstatus 0x%x\n",
-+		R_REG(&di->regs->xmtcontrol),
-+		R_REG(&di->regs->xmtaddr),
-+		R_REG(&di->regs->xmtptr),
-+		R_REG(&di->regs->xmtstatus));
-+	return (buf);
-+}
++	uint32 config1;
++	uint sets, ways;
 +
-+char*
-+dma_dumprx(dma_info_t *di, char *buf)
-+{
-+	buf += sprintf(buf, "rxd 0x%lx rxdpa 0x%lx rxp 0x%lx rxin %d rxout %d\n",
-+		(ulong)di->rxd, di->rxdpa, (ulong)di->rxp, di->rxin, di->rxout);
-+	buf += sprintf(buf, "rcvcontrol 0x%x rcvaddr 0x%x rcvptr 0x%x rcvstatus 0x%x\n",
-+		R_REG(&di->regs->rcvcontrol),
-+		R_REG(&di->regs->rcvaddr),
-+		R_REG(&di->regs->rcvptr),
-+		R_REG(&di->regs->rcvstatus));
-+	return (buf);
-+}
++	config1 = MFC0(C0_CONFIG, 1);
 +
-+char*
-+dma_dump(dma_info_t *di, char *buf)
-+{
-+	buf = dma_dumptx(di, buf);
-+	buf = dma_dumprx(di, buf);
-+	return (buf);
++	/* Instruction Cache Size = Associativity * Line Size * Sets Per Way */
++	if ((*lsize = ((config1 >> 19) & 7)))
++		*lsize = 2 << *lsize;
++	sets = 64 << ((config1 >> 22) & 7);
++	ways = 1 + ((config1 >> 16) & 7);
++	*size = *lsize * sets * ways;
 +}
 +
-+uint
-+dma_getvar(dma_info_t *di, char *name)
-+{
-+	if (!strcmp(name, "&txavail"))
-+		return ((uint) &di->txavail);
-+	else {
-+		ASSERT(0);
-+	}
-+	return (0);
-+}
++#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)
 +
-+void
-+dma_txblock(dma_info_t *di)
++static void
++handler(void)
 +{
-+	di->txavail = 0;
++	/* Step 11 */
++	__asm__ (
++		".set\tmips32\n\t"
++		"ssnop\n\t"
++		"ssnop\n\t"
++	/* Disable interrupts */
++	/*	MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~(ALLINTS | STO_IE)); */
++		"mfc0 $15, $12\n\t"
++		"and $15, $15, -31746\n\t"
++		"mtc0 $15, $12\n\t"
++		"eret\n\t"
++		"nop\n\t"
++		"nop\n\t"
++		".set\tmips0"
++	);
 +}
 +
-+void
-+dma_txunblock(dma_info_t *di)
++/* The following MUST come right after handler() */
++static void
++afterhandler(void)
 +{
-+	di->txavail = di->ntxd - NTXDACTIVE(di->txin, di->txout) - 1;
 +}
 +
-+uint
-+dma_txactive(dma_info_t *di)
-+{
-+	return (NTXDACTIVE(di->txin, di->txout));
-+}
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/linux_osl.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/linux_osl.c
---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/linux_osl.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/linux_osl.c	2005-08-28 11:12:20.476852160 +0200
-@@ -0,0 +1,420 @@
 +/*
-+ * Linux OS Independent Layer
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: linux_osl.c,v 1.2 2005/02/28 13:34:25 jolt Exp $
++ * Set the MIPS, backplane and PCI clocks as closely as possible.
 + */
-+
-+#define LINUX_OSL
-+
-+#include <typedefs.h>
-+#include <bcmendian.h>
-+#include <linuxver.h>
-+#include <linux_osl.h>
-+#include <bcmutils.h>
-+#include <linux/delay.h>
-+#ifdef mips
-+#include <asm/paccess.h>
-+#endif
-+#include <pcicfg.h>
-+
-+#define PCI_CFG_RETRY 10	
-+
-+void*
-+osl_pktget(void *drv, uint len, bool send)
++bool
++sb_mips_setclock(void *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock)
 +{
-+	struct sk_buff *skb;
++	extifregs_t *eir = NULL;
++	chipcregs_t *cc = NULL;
++	mipsregs_t *mipsr = NULL;
++	volatile uint32 *clockcontrol_n, *clockcontrol_sb, *clockcontrol_pci;
++	uint32 orig_n, orig_sb, orig_pci, orig_m2, orig_mips, orig_ratio_parm, new_ratio;
++	uint32 pll_type, sync_mode;
++	uint idx, i;
++	struct {
++		uint32 mipsclock;
++		uint16 n;
++		uint32 sb;
++		uint32 pci33;
++		uint32 pci25;
++	} type1_table[] = {
++		{  96000000, 0x0303, 0x04020011, 0x11030011, 0x11050011 }, /*  96.000 32.000 24.000 */
++		{ 100000000, 0x0009, 0x04020011, 0x11030011, 0x11050011 }, /* 100.000 33.333 25.000 */
++		{ 104000000, 0x0802, 0x04020011, 0x11050009, 0x11090009 }, /* 104.000 31.200 24.960 */
++		{ 108000000, 0x0403, 0x04020011, 0x11050009, 0x02000802 }, /* 108.000 32.400 24.923 */
++		{ 112000000, 0x0205, 0x04020011, 0x11030021, 0x02000403 }, /* 112.000 32.000 24.889 */
++		{ 115200000, 0x0303, 0x04020009, 0x11030011, 0x11050011 }, /* 115.200 32.000 24.000 */
++		{ 120000000, 0x0011, 0x04020011, 0x11050011, 0x11090011 }, /* 120.000 30.000 24.000 */
++		{ 124800000, 0x0802, 0x04020009, 0x11050009, 0x11090009 }, /* 124.800 31.200 24.960 */
++		{ 128000000, 0x0305, 0x04020011, 0x11050011, 0x02000305 }, /* 128.000 32.000 24.000 */
++		{ 132000000, 0x0603, 0x04020011, 0x11050011, 0x02000305 }, /* 132.000 33.000 24.750 */
++		{ 136000000, 0x0c02, 0x04020011, 0x11090009, 0x02000603 }, /* 136.000 32.640 24.727 */
++		{ 140000000, 0x0021, 0x04020011, 0x11050021, 0x02000c02 }, /* 140.000 30.000 24.706 */
++		{ 144000000, 0x0405, 0x04020011, 0x01020202, 0x11090021 }, /* 144.000 30.857 24.686 */
++		{ 150857142, 0x0605, 0x04020021, 0x02000305, 0x02000605 }, /* 150.857 33.000 24.000 */
++		{ 152000000, 0x0e02, 0x04020011, 0x11050021, 0x02000e02 }, /* 152.000 32.571 24.000 */
++		{ 156000000, 0x0802, 0x04020005, 0x11050009, 0x11090009 }, /* 156.000 31.200 24.960 */
++		{ 160000000, 0x0309, 0x04020011, 0x11090011, 0x02000309 }, /* 160.000 32.000 24.000 */
++		{ 163200000, 0x0c02, 0x04020009, 0x11090009, 0x02000603 }, /* 163.200 32.640 24.727 */
++		{ 168000000, 0x0205, 0x04020005, 0x11030021, 0x02000403 }, /* 168.000 32.000 24.889 */
++		{ 176000000, 0x0602, 0x04020003, 0x11050005, 0x02000602 }, /* 176.000 33.000 24.000 */
++	};
++	typedef struct {
++		uint32 mipsclock;
++		uint32 sbclock;
++		uint16 n;
++		uint32 sb;
++		uint32 pci33;
++		uint32 m2;
++		uint32 m3;
++		uint32 ratio;
++		uint32 ratio_parm;
++	} n4m_table_t;
 +
-+	if ((skb = dev_alloc_skb(len)) == NULL)
-+		return (NULL);
++	n4m_table_t type2_table[] = {
++		{ 180000000,  80000000, 0x0403, 0x01010000, 0x01020300, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
++		{ 180000000,  90000000, 0x0403, 0x01000100, 0x01020300, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 },
++		{ 200000000, 100000000, 0x0303, 0x01000000, 0x01000600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 },
++		{ 211200000, 105600000, 0x0902, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
++		{ 220800000, 110400000, 0x1500, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
++		{ 230400000, 115200000, 0x0604, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
++		{ 234000000, 104000000, 0x0b01, 0x01010000, 0x01010700, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
++		{ 240000000, 120000000,	0x0803,	0x01000200, 0x01020600,	0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
++		{ 252000000, 126000000,	0x0504,	0x01000100, 0x01020500,	0x01000100, 0x05000100, 0x21, 0x0aaa0555 },
++		{ 264000000, 132000000, 0x0903, 0x01000200, 0x01020700, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
++		{ 270000000, 120000000, 0x0703, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
++		{ 276000000, 122666666, 0x1500, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
++		{ 280000000, 140000000, 0x0503, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 },
++		{ 288000000, 128000000, 0x0604, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
++		{ 288000000, 144000000, 0x0404, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 },
++		{ 300000000, 133333333, 0x0803, 0x01010000, 0x01020600, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
++		{ 300000000, 150000000, 0x0803, 0x01000100, 0x01020600, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 }
++	};
 +
-+	skb_put(skb, len);
++	n4m_table_t type4_table[] = {
++		{ 192000000,  96000000, 0x0702,	0x04020011, 0x11030011, 0x04020011, 0x04020003, 0x21, 0x0aaa0555 },
++		{ 200000000, 100000000, 0x0009,	0x04020011, 0x11030011, 0x04020011, 0x04020003, 0x21, 0x0aaa0555 },
++		{ 216000000, 108000000, 0x0211, 0x11020005, 0x11030303, 0x11020005, 0x04000005, 0x21, 0x0aaa0555 },
++		{ 228000000, 101333333, 0x0e02, 0x11030003, 0x11210005, 0x11030305, 0x04000005, 0x94, 0x012a00a9 },
++		{ 228000000, 114000000, 0x0e02, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 0x21, 0x0aaa0555 },
++		{ 240000000, 120000000,	0x0109,	0x11030002, 0x01050203,	0x11030002, 0x04000003, 0x21, 0x0aaa0555 },
++		{ 252000000, 126000000,	0x0203,	0x04000005, 0x11050005,	0x04000005, 0x04000002, 0x21, 0x0aaa0555 },
++		{ 264000000, 132000000, 0x0602, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 0x21, 0x0aaa0555 },
++		{ 272000000, 116571428, 0x0c02, 0x04000021, 0x02000909, 0x02000221, 0x04000003, 0x73, 0x254a14a9 },
++		{ 280000000, 120000000, 0x0209, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 0x73, 0x254a14a9 },
++		{ 288000000, 123428571, 0x0111, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 0x73, 0x254a14a9 },
++		{ 300000000, 120000000, 0x0009, 0x04000009, 0x01030203, 0x02000902, 0x04000002, 0x52, 0x02520129 }
++	};
++	uint icache_size, ic_lsize;
++	ulong start, end, dst;
++	bool ret = FALSE;
 +
-+	/* ensure the cookie field is cleared */ 
-+	PKTSETCOOKIE(skb, NULL);
++	/* get index of the current core */
++	idx = sb_coreidx(sbh);
 +
-+	return ((void*) skb);
-+}
++	/* switch to extif or chipc core */
++	if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
++		pll_type = PLL_TYPE1;
++		clockcontrol_n = &eir->clockcontrol_n;
++		clockcontrol_sb = &eir->clockcontrol_sb;
++		clockcontrol_pci = &eir->clockcontrol_pci;
++	} else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
++		pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK;
++		clockcontrol_n = &cc->clockcontrol_n;
++		clockcontrol_sb = &cc->clockcontrol_sb;
++		clockcontrol_pci = &cc->clockcontrol_pci;
++	} else
++		goto done;
 +
-+void
-+osl_pktfree(void *p)
-+{
-+	struct sk_buff *skb, *nskb;
++	/* Store the current clock register values */
++	orig_n = R_REG(clockcontrol_n);
++	orig_sb = R_REG(clockcontrol_sb);
++	orig_pci = R_REG(clockcontrol_pci);
 +
-+	skb = (struct sk_buff*) p;
++	if (pll_type == PLL_TYPE1) {
++		/* Keep the current PCI clock if not specified */
++		if (pciclock == 0) {
++			pciclock = sb_clock_rate(pll_type, R_REG(clockcontrol_n), R_REG(clockcontrol_pci));
++			pciclock = (pciclock <= 25000000) ? 25000000 : 33000000;
++		}
 +
-+	/* perversion: we use skb->next to chain multi-skb packets */
-+	while (skb) {
-+		nskb = skb->next;
-+		skb->next = NULL;
-+		if (skb->destructor) {
-+			/* cannot kfree_skb() on hard IRQ (net/core/skbuff.c) if destructor exists */
-+			dev_kfree_skb_any(skb);
++		/* Search for the closest MIPS clock less than or equal to a preferred value */
++		for (i = 0; i < ARRAYSIZE(type1_table); i++) {
++			ASSERT(type1_table[i].mipsclock ==
++			       sb_clock_rate(pll_type, type1_table[i].n, type1_table[i].sb));
++			if (type1_table[i].mipsclock > mipsclock)
++				break;
++		}
++		if (i == 0) {
++			ret = FALSE;
++			goto done;
 +		} else {
-+			/* can free immediately (even in_irq()) if destructor does not exist */
-+			dev_kfree_skb(skb);
++			ret = TRUE;
++			i--;
 +		}
-+		skb = nskb;
-+	}
-+}
++		ASSERT(type1_table[i].mipsclock <= mipsclock);
 +
-+uint32
-+osl_pci_read_config(void *loc, uint offset, uint size)
-+{
-+	struct pci_dev *pdev;
-+	uint val;
-+	uint retry=PCI_CFG_RETRY;	 
++		/* No PLL change */
++		if ((orig_n == type1_table[i].n) &&
++		    (orig_sb == type1_table[i].sb) &&
++		    (orig_pci == type1_table[i].pci33))
++			goto done;
 +
-+	/* only 4byte access supported */
-+	ASSERT(size == 4);
++		/* Set the PLL controls */
++		W_REG(clockcontrol_n, type1_table[i].n);
++		W_REG(clockcontrol_sb, type1_table[i].sb);
++		if (pciclock == 25000000)
++			W_REG(clockcontrol_pci, type1_table[i].pci25);
++		else
++			W_REG(clockcontrol_pci, type1_table[i].pci33);
 +
-+	pdev = (struct pci_dev*)loc;
-+	do {
-+		pci_read_config_dword(pdev, offset, &val);
-+		if (val != 0xffffffff)
-+			break;
-+	} while (retry--);
++		/* Reset */
++		sb_watchdog(sbh, 1);
++		while (1);
++	} else if ((pll_type == PLL_TYPE2) || (pll_type == PLL_TYPE4)) {
++		n4m_table_t *table = (pll_type == PLL_TYPE2) ? type2_table : type4_table;
++		uint tabsz = (pll_type == PLL_TYPE2) ? ARRAYSIZE(type2_table) : ARRAYSIZE(type4_table);
 +
++		ASSERT(cc);
 +
-+	return (val);
-+}
++		/* Store the current clock register values */
++		orig_m2 = R_REG(&cc->clockcontrol_m2);
++		orig_mips = R_REG(&cc->clockcontrol_mips);
++		orig_ratio_parm = 0;
 +
-+void
-+osl_pci_write_config(void *loc, uint offset, uint size, uint val)
-+{
-+	struct pci_dev *pdev;
-+	uint retry=PCI_CFG_RETRY;	 
++		/* Look up current ratio */
++		for (i = 0; i < tabsz; i++) {
++			if ((orig_n == table[i].n) &&
++			    (orig_sb == table[i].sb) &&
++			    (orig_pci == table[i].pci33) &&
++			    (orig_m2 == table[i].m2) &&
++			    (orig_mips == table[i].m3)) {
++				orig_ratio_parm = table[i].ratio_parm;
++				break;
++			}
++		}
 +
-+	/* only 4byte access supported */
-+	ASSERT(size == 4);
++		/* Search for the closest MIPS clock greater or equal to a preferred value */
++		for (i = 0; i < tabsz; i++) {
++			ASSERT(table[i].mipsclock ==
++			       sb_clock_rate(pll_type, table[i].n, table[i].m3));
++			if ((mipsclock <= table[i].mipsclock) &&
++			    ((sbclock == 0) || (sbclock <= table[i].sbclock)))
++				break;
++		}
++		if (i == tabsz) {
++			ret = FALSE;
++			goto done;
++		} else {
++			ret = TRUE;
++		}
 +
-+	pdev = (struct pci_dev*)loc;
-+
-+	do {
-+		pci_write_config_dword(pdev, offset, val);
-+		if (offset!=PCI_BAR0_WIN)
-+			break;
-+		if (osl_pci_read_config(loc,offset,size) == val) 
-+			break;
-+	} while (retry--);
++		/* No PLL change */
++		if ((orig_n == table[i].n) &&
++		    (orig_sb == table[i].sb) &&
++		    (orig_pci == table[i].pci33) &&
++		    (orig_m2 == table[i].m2) &&
++		    (orig_mips == table[i].m3))
++			goto done;
 +
-+}
++		/* Set the PLL controls */
++		W_REG(clockcontrol_n, table[i].n);
++		W_REG(clockcontrol_sb, table[i].sb);
++		W_REG(clockcontrol_pci, table[i].pci33);
++		W_REG(&cc->clockcontrol_m2, table[i].m2);
++		W_REG(&cc->clockcontrol_mips, table[i].m3);
 +
-+void
-+osl_pcmcia_read_attr(void *osh, uint offset, void *buf, int size)
-+{
-+	ASSERT(0);
-+}
++		/* No ratio change */
++		if (orig_ratio_parm == table[i].ratio_parm)
++			goto end_fill;
 +
-+void
-+osl_pcmcia_write_attr(void *osh, uint offset, void *buf, int size)
-+{
-+	ASSERT(0);
-+}
++		new_ratio = table[i].ratio_parm;
 +
-+void
-+osl_assert(char *exp, char *file, int line)
-+{
-+	char tempbuf[255];
++		icache_probe(&icache_size, &ic_lsize);
 +
-+	sprintf(tempbuf, "assertion \"%s\" failed: file \"%s\", line %d\n", exp, file, line);
-+	panic(tempbuf);
-+}
++		/* Preload the code into the cache */
++		start = ((ulong) &&start_fill) & ~(ic_lsize - 1);
++		end = ((ulong) &&end_fill + (ic_lsize - 1)) & ~(ic_lsize - 1);
++		while (start < end) {
++			cache_unroll(start, Fill_I);
++			start += ic_lsize;
++		}
 +
-+/*
-+ * BINOSL selects the slightly slower function-call-based binary compatible osl.
-+ */
-+#ifdef BINOSL
++		/* Copy the handler */
++		start = (ulong) &handler;
++		end = (ulong) &afterhandler;
++		dst = KSEG1ADDR(0x180);
++		for (i = 0; i < (end - start); i += 4)
++			*((ulong *)(dst + i)) = *((ulong *)(start + i));
++		
++		/* Preload handler into the cache one line at a time */
++		for (i = 0; i < (end - start); i += 4)
++			cache_unroll(dst + i, Fill_I);
 +
-+int
-+osl_printf(const char *format, ...)
-+{
-+	va_list args;
-+	char buf[1024];
-+	int len;
++		/* Clear BEV bit */
++		MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~ST0_BEV);
 +
-+	/* sprintf into a local buffer because there *is* no "vprintk()".. */
-+	va_start(args, format);
-+	len = vsprintf(buf, format, args);
-+	va_end(args);
++		/* Enable interrupts */
++		MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) | (ALLINTS | ST0_IE));
 +
-+	if (len > sizeof (buf)) {
-+		printk("osl_printf: buffer overrun\n");
-+		return (0);
-+	}
++		/* Enable MIPS timer interrupt */
++		if (!(mipsr = sb_setcore(sbh, SB_MIPS, 0)) &&
++		    !(mipsr = sb_setcore(sbh, SB_MIPS33, 0)))
++			ASSERT(mipsr);
++		W_REG(&mipsr->intmask, 1);
 +
-+	return (printk(buf));
-+}
++	start_fill:
++		/* step 1, set clock ratios */
++		MTC0(C0_BROADCOM, 3, new_ratio);
++		MTC0(C0_BROADCOM, 1, 8);
 +
-+int
-+osl_sprintf(char *buf, const char *format, ...)
-+{
-+	va_list args;
-+	int rc;
++		/* step 2: program timer intr */
++		W_REG(&mipsr->timer, 100);
++		(void) R_REG(&mipsr->timer);
 +
-+	va_start(args, format);
-+	rc = vsprintf(buf, format, args);
-+	va_end(args);
-+	return (rc);
-+}
++		/* step 3, switch to async */
++		sync_mode = MFC0(C0_BROADCOM, 4);
++		MTC0(C0_BROADCOM, 4, 1 << 22);
 +
-+int
-+osl_strcmp(const char *s1, const char *s2)
-+{
-+	return (strcmp(s1, s2));
-+}
++		/* step 4, set cfg active */
++		MTC0(C0_BROADCOM, 2, 0x9);
 +
-+int
-+osl_strncmp(const char *s1, const char *s2, uint n)
-+{
-+	return (strncmp(s1, s2, n));
-+}
 +
-+int
-+osl_strlen(char *s)
-+{
-+	return (strlen(s));
-+}
++		/* steps 5 & 6 */ 
++		__asm__ __volatile__ (
++			".set\tmips3\n\t"
++			"wait\n\t"
++			".set\tmips0"
++		);
 +
-+char*
-+osl_strcpy(char *d, const char *s)
-+{
-+	return (strcpy(d, s));
-+}
++		/* step 7, clear cfg_active */
++		MTC0(C0_BROADCOM, 2, 0);
++		
++		/* Additional Step: set back to orig sync mode */
++		MTC0(C0_BROADCOM, 4, sync_mode);
 +
-+char*
-+osl_strncpy(char *d, const char *s, uint n)
-+{
-+	return (strncpy(d, s, n));
-+}
++		/* step 8, fake soft reset */
++		MTC0(C0_BROADCOM, 5, MFC0(C0_BROADCOM, 5) | 4);
 +
-+void
-+bcopy(const void *src, void *dst, int len)
-+{
-+	memcpy(dst, src, len);
-+}
++	end_fill:
++		/* step 9 set watchdog timer */
++		sb_watchdog(sbh, 20);
++		(void) R_REG(&cc->chipid);
 +
-+int
-+bcmp(const void *b1, const void *b2, int len)
-+{
-+	return (memcmp(b1, b2, len));
-+}
++		/* step 11 */
++		__asm__ __volatile__ (
++			".set\tmips3\n\t"
++			"sync\n\t"
++			"wait\n\t"
++			".set\tmips0"
++		);
++		while (1);
++	}
 +
-+void
-+bzero(void *b, int len)
-+{
-+	memset(b, '\0', len);
-+}
++done:
++	/* switch back to previous core */
++	sb_setcoreidx(sbh, idx);
 +
-+void*
-+osl_malloc(uint size)
-+{
-+	return (kmalloc(size, GFP_ATOMIC));
++	return ret;
 +}
 +
-+void
-+osl_mfree(void *addr, uint size)
-+{
-+	kfree(addr);
-+}
 +
++/* returns the ncdl value to be programmed into sdram_ncdl for calibration */
 +uint32
-+osl_readl(volatile uint32 *r)
-+{
-+	return (readl(r));
-+}
-+
-+uint16
-+osl_readw(volatile uint16 *r)
-+{
-+	return (readw(r));
-+}
-+
-+uint8
-+osl_readb(volatile uint8 *r)
++sb_memc_get_ncdl(void *sbh)
 +{
-+	return (readb(r));
-+}
++	sbmemcregs_t *memc;
++	uint32 ret = 0;
++	uint32 config, rd, wr, misc, dqsg, cd, sm, sd;
++	uint idx, rev;
 +
-+void
-+osl_writel(uint32 v, volatile uint32 *r)
-+{
-+	writel(v, r);
-+}
++	idx = sb_coreidx(sbh);
 +
-+void
-+osl_writew(uint16 v, volatile uint16 *r)
-+{
-+	writew(v, r);
-+}
++	memc = (sbmemcregs_t *)sb_setcore(sbh, SB_MEMC, 0);
++	if (memc == 0)
++		goto out;
 +
-+void
-+osl_writeb(uint8 v, volatile uint8 *r)
-+{
-+	writeb(v, r);
-+}
++	rev = sb_corerev(sbh);
 +
-+void *
-+osl_uncached(void *va)
-+{
-+#ifdef mips
-+	return ((void*)KSEG1ADDR(va));
-+#else
-+	return ((void*)va);
-+#endif
-+}
++	config = R_REG(&memc->config);
++	wr = R_REG(&memc->wrncdlcor);
++	rd = R_REG(&memc->rdncdlcor);
++	misc = R_REG(&memc->miscdlyctl);
++	dqsg = R_REG(&memc->dqsgatencdl);
 +
-+uint
-+osl_getcycles(void)
-+{
-+	uint cycles;
++	rd &= MEMC_RDNCDLCOR_RD_MASK;
++	wr &= MEMC_WRNCDLCOR_WR_MASK; 
++	dqsg &= MEMC_DQSGATENCDL_G_MASK;
 +
-+#if defined(mips)
-+	cycles = read_c0_count() * 2;
-+#elif defined(__i386__)
-+	rdtscl(cycles);
-+#else
-+	cycles = 0;
-+#endif
-+	return cycles;
-+}
++	if (config & MEMC_CONFIG_DDR) {
++		ret = (wr << 16) | (rd << 8) | dqsg;
++	} else {
++		if (rev > 0)
++			cd = rd;
++		else
++			cd = (rd == MEMC_CD_THRESHOLD) ? rd : (wr + MEMC_CD_THRESHOLD);
++		sm = (misc & MEMC_MISC_SM_MASK) >> MEMC_MISC_SM_SHIFT;
++		sd = (misc & MEMC_MISC_SD_MASK) >> MEMC_MISC_SD_SHIFT;
++		ret = (sm << 16) | (sd << 8) | cd;
++	}
 +
-+void *
-+osl_reg_map(uint32 pa, uint size)
-+{
-+	return (ioremap_nocache((unsigned long)pa, (unsigned long)size));
-+}
++out:
++	/* switch back to previous core */
++	sb_setcoreidx(sbh, idx);
 +
-+void
-+osl_reg_unmap(void *va)
-+{
-+	iounmap(va);
++	return ret;
 +}
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbpci.c
+--- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbpci.c	2005-09-16 10:29:18.169592704 +0200
+@@ -0,0 +1,530 @@
++/*
++ * Low-Level PCI and SB support for BCM47xx
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ * 
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: sbpci.c,v 1.2 2005/02/28 13:34:25 jolt Exp $
++ */
 +
-+int
-+osl_busprobe(uint32 *val, uint32 addr)
-+{
-+#ifdef mips
-+	return get_dbe(*val, (uint32*)addr);
-+#else
-+	*val = readl(addr);
-+	return 0;
++#include <typedefs.h>
++#include <pcicfg.h>
++#include <bcmdevs.h>
++#include <sbconfig.h>
++#include <sbpci.h>
++#include <osl.h>
++#include <bcmendian.h>
++#include <bcmutils.h>
++#include <sbutils.h>
++#include <bcmnvram.h>
++#include <hndmips.h>
++
++/* Can free sbpci_init() memory after boot */
++#ifndef linux
++#define __init
 +#endif
-+}
 +
-+void*
-+osl_dma_alloc_consistent(void *dev, uint size, ulong *pap)
-+{
-+	return (pci_alloc_consistent((struct pci_dev*)dev, size, (dma_addr_t*)pap));
-+}
++/* Emulated configuration space */
++static pci_config_regs sb_config_regs[SB_MAXCORES];
 +
-+void
-+osl_dma_free_consistent(void *dev, void *va, uint size, ulong pa)
-+{
-+	pci_free_consistent((struct pci_dev*)dev, size, va, (dma_addr_t)pa);
-+}
++/* Banned cores */
++static uint16 pci_ban[32] = { 0 };
++static uint pci_banned = 0;
 +
-+uint
-+osl_dma_map(void *dev, void *va, uint size, int direction)
-+{
-+	int dir;
++/* CardBus mode */
++static bool cardbus = FALSE;
 +
-+	dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE;
-+	return (pci_map_single(dev, va, size, dir));
-+}
++/*
++ * Functions for accessing external PCI configuration space
++ */
 +
-+void
-+osl_dma_unmap(void *dev, uint pa, uint size, int direction)
++/* Assume one-hot slot wiring */
++#define PCI_SLOT_MAX 16
++
++static uint32
++config_cmd(void *sbh, uint bus, uint dev, uint func, uint off)
 +{
-+	int dir;
++	uint coreidx;
++	sbpciregs_t *regs;
++	uint32 addr = 0;
 +
-+	dir = (direction == DMA_TX)? PCI_DMA_TODEVICE: PCI_DMA_FROMDEVICE;
-+	pci_unmap_single(dev, (uint32)pa, size, dir);
-+}
++	/* CardBusMode supports only one device */
++	if (cardbus && dev > 1)
++		return 0;
 +
-+void
-+osl_delay(uint usec)
-+{
-+	udelay(usec);
-+}
++	coreidx = sb_coreidx(sbh);
++	regs = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0);
 +
-+uchar*
-+osl_pktdata(void *drv, void *skb)
-+{
-+	return (((struct sk_buff*)skb)->data);
-+}
++	/* Type 0 transaction */
++	if (bus == 1) {
++		/* Skip unwired slots */
++		if (dev < PCI_SLOT_MAX) {
++			/* Slide the PCI window to the appropriate slot */
++			W_REG(&regs->sbtopci1, SBTOPCI_CFG0 | ((1 << (dev + 16)) & SBTOPCI1_MASK));
++			addr = SB_PCI_CFG | ((1 << (dev + 16)) & ~SBTOPCI1_MASK) |
++				(func << 8) | (off & ~3);
++		}
++	}
 +
-+uint
-+osl_pktlen(void *drv, void *skb)
-+{
-+	return (((struct sk_buff*)skb)->len);
-+}
++	/* Type 1 transaction */
++	else {
++		W_REG(&regs->sbtopci1, SBTOPCI_CFG1);
++		addr = SB_PCI_CFG | (bus << 16) | (dev << 11) | (func << 8) | (off & ~3);
++	}
 +
-+void*
-+osl_pktnext(void *drv, void *skb)
-+{
-+	return (((struct sk_buff*)skb)->next);
-+}
++	sb_setcoreidx(sbh, coreidx);
 +
-+void
-+osl_pktsetnext(void *skb, void *x)
-+{
-+	((struct sk_buff*)skb)->next = (struct sk_buff*)x;
++	return addr;
 +}
 +
-+void
-+osl_pktsetlen(void *drv, void *skb, uint len)
++static int
++extpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
 +{
-+	__skb_trim((struct sk_buff*)skb, len);
-+}
++	uint32 addr, *reg = NULL, val;
++	int ret = 0;
 +
-+uchar*
-+osl_pktpush(void *drv, void *skb, int bytes)
-+{
-+	return (skb_push((struct sk_buff*)skb, bytes));
-+}
++	if (!(addr = config_cmd(sbh, bus, dev, func, off)) ||
++	    !(reg = (uint32 *) REG_MAP(addr, len)) ||
++	    BUSPROBE(val, reg))
++		val = 0xffffffff;
 +
-+uchar*
-+osl_pktpull(void *drv, void *skb, int bytes)
-+{
-+	return (skb_pull((struct sk_buff*)skb, bytes));
-+}
++	val >>= 8 * (off & 3);
++	if (len == 4)
++		*((uint32 *) buf) = val;
++	else if (len == 2)
++		*((uint16 *) buf) = (uint16) val;
++	else if (len == 1)
++		*((uint8 *) buf) = (uint8) val;
++	else
++		ret = -1;
 +
-+void*
-+osl_pktdup(void *drv, void *skb)
-+{
-+	return (skb_clone((struct sk_buff*)skb, GFP_ATOMIC));
-+}
++	if (reg)
++		REG_UNMAP(reg);
 +
-+void*
-+osl_pktcookie(void *skb)
-+{
-+	return ((void*)((struct sk_buff*)skb)->csum);
++	return ret;
 +}
 +
-+void
-+osl_pktsetcookie(void *skb, void *x)
++static int
++extpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
 +{
-+	((struct sk_buff*)skb)->csum = (uint)x;
-+}
++	uint32 addr, *reg = NULL, val;
++	int ret = 0;
 +
-+void*
-+osl_pktlink(void *skb)
-+{
-+	return (((struct sk_buff*)skb)->prev);
-+}
++	if (!(addr = config_cmd(sbh, bus, dev, func, off)) ||
++	    !(reg = (uint32 *) REG_MAP(addr, len)) ||
++	    BUSPROBE(val, reg))
++		goto done;
 +
-+void
-+osl_pktsetlink(void *skb, void *x)
-+{
-+	((struct sk_buff*)skb)->prev = (struct sk_buff*)x;
++	if (len == 4)
++		val = *((uint32 *) buf);
++	else if (len == 2) {
++		val &= ~(0xffff << (8 * (off & 3)));
++		val |= *((uint16 *) buf) << (8 * (off & 3));
++	} else if (len == 1) {
++		val &= ~(0xff << (8 * (off & 3)));
++		val |= *((uint8 *) buf) << (8 * (off & 3));
++	} else
++		ret = -1;
++
++	W_REG(reg, val);
++
++ done:
++	if (reg)
++		REG_UNMAP(reg);
++
++	return ret;
 +}
 +
-+#endif
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbmips.c
---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbmips.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbmips.c	2005-08-28 11:12:20.478851856 +0200
-@@ -0,0 +1,950 @@
 +/*
-+ * BCM47XX Sonics SiliconBackplane MIPS core routines
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: sbmips.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
++ * Functions for accessing translated SB configuration space
 + */
 +
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <sbutils.h>
-+#include <bcmdevs.h>
-+#include <bcmnvram.h>
-+#include <bcmutils.h>
-+#include <hndmips.h>
-+#include <sbconfig.h>
-+#include <sbextif.h>
-+#include <sbchipc.h>
-+#include <sbmemc.h>
++static int
++sb_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++{
++	pci_config_regs *cfg;
 +
-+/*
-+ * Memory segments (32bit kernel mode addresses)
-+ */
-+#undef KUSEG
-+#undef KSEG0
-+#undef KSEG1
-+#undef KSEG2
-+#undef KSEG3
-+#define KUSEG		0x00000000
-+#define KSEG0		0x80000000
-+#define KSEG1		0xa0000000
-+#define KSEG2		0xc0000000
-+#define KSEG3		0xe0000000
++	if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs))
++		return -1;
++	cfg = &sb_config_regs[dev];
 +
-+/*
-+ * Map an address to a certain kernel segment
-+ */
-+#undef KSEG0ADDR
-+#undef KSEG1ADDR
-+#undef KSEG2ADDR
-+#undef KSEG3ADDR
-+#define KSEG0ADDR(a)		(((a) & 0x1fffffff) | KSEG0)
-+#define KSEG1ADDR(a)		(((a) & 0x1fffffff) | KSEG1)
-+#define KSEG2ADDR(a)		(((a) & 0x1fffffff) | KSEG2)
-+#define KSEG3ADDR(a)		(((a) & 0x1fffffff) | KSEG3)
++	ASSERT(ISALIGNED(off, len));
++	ASSERT(ISALIGNED(buf, len));
 +
-+/*
-+ * The following macros are especially useful for __asm__
-+ * inline assembler.
-+ */
-+#ifndef __STR
-+#define __STR(x) #x
-+#endif
-+#ifndef STR
-+#define STR(x) __STR(x)
-+#endif
++	if (len == 4)
++		*((uint32 *) buf) = ltoh32(*((uint32 *)((ulong) cfg + off)));
++	else if (len == 2)
++		*((uint16 *) buf) = ltoh16(*((uint16 *)((ulong) cfg + off)));
++	else if (len == 1)
++		*((uint8 *) buf) = *((uint8 *)((ulong) cfg + off));
++	else
++		return -1;
 +
-+/*  *********************************************************************
-+    *  CP0 Registers 
-+    ********************************************************************* */
++	return 0;
++}
 +
-+#define C0_INX		0		/* CP0: TLB Index */
-+#define C0_RAND		1		/* CP0: TLB Random */
-+#define C0_TLBLO0	2		/* CP0: TLB EntryLo0 */
-+#define C0_TLBLO	C0_TLBLO0	/* CP0: TLB EntryLo0 */
-+#define C0_TLBLO1	3		/* CP0: TLB EntryLo1 */
-+#define C0_CTEXT	4		/* CP0: Context */
-+#define C0_PGMASK	5		/* CP0: TLB PageMask */
-+#define C0_WIRED	6		/* CP0: TLB Wired */
-+#define C0_BADVADDR	8		/* CP0: Bad Virtual Address */
-+#define C0_COUNT 	9		/* CP0: Count */
-+#define C0_TLBHI	10		/* CP0: TLB EntryHi */
-+#define C0_COMPARE	11		/* CP0: Compare */
-+#define C0_SR		12		/* CP0: Processor Status */
-+#define C0_STATUS	C0_SR		/* CP0: Processor Status */
-+#define C0_CAUSE	13		/* CP0: Exception Cause */
-+#define C0_EPC		14		/* CP0: Exception PC */
-+#define C0_PRID		15		/* CP0: Processor Revision Indentifier */
-+#define C0_CONFIG	16		/* CP0: Config */
-+#define C0_LLADDR	17		/* CP0: LLAddr */
-+#define C0_WATCHLO	18		/* CP0: WatchpointLo */
-+#define C0_WATCHHI	19		/* CP0: WatchpointHi */
-+#define C0_XCTEXT	20		/* CP0: XContext */
-+#define C0_DIAGNOSTIC	22		/* CP0: Diagnostic */
-+#define C0_BROADCOM	C0_DIAGNOSTIC	/* CP0: Broadcom Register */
-+#define C0_ECC		26		/* CP0: ECC */
-+#define C0_CACHEERR	27		/* CP0: CacheErr */
-+#define C0_TAGLO	28		/* CP0: TagLo */
-+#define C0_TAGHI	29		/* CP0: TagHi */
-+#define C0_ERREPC	30		/* CP0: ErrorEPC */
++static int
++sb_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++{
++	uint coreidx, n;
++	void *regs;
++	sbconfig_t *sb;
++	pci_config_regs *cfg;
 +
-+/*
-+ * Macros to access the system control coprocessor
-+ */
++	if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs))
++		return -1;
++	cfg = &sb_config_regs[dev];
 +
-+#define MFC0(source, sel)					\
-+({								\
-+	int __res;						\
-+	__asm__ __volatile__(					\
-+	".set\tnoreorder\n\t"					\
-+	".set\tnoat\n\t"					\
-+	".word\t"STR(0x40010000 | ((source)<<11) | (sel))"\n\t"	\
-+	"move\t%0,$1\n\t"					\
-+	".set\tat\n\t"						\
-+	".set\treorder"						\
-+	:"=r" (__res)						\
-+	:							\
-+	:"$1");							\
-+	__res;							\
-+})
++	ASSERT(ISALIGNED(off, len));
++	ASSERT(ISALIGNED(buf, len));
 +
-+#define MTC0(source, sel, value)				\
-+do {								\
-+	__asm__ __volatile__(					\
-+	".set\tnoreorder\n\t"					\
-+	".set\tnoat\n\t"					\
-+	"move\t$1,%z0\n\t"					\
-+	".word\t"STR(0x40810000 | ((source)<<11) | (sel))"\n\t"	\
-+	".set\tat\n\t"						\
-+	".set\treorder"						\
-+	:							\
-+	:"Jr" (value)						\
-+	:"$1");							\
-+} while (0)
++	/* Emulate BAR sizing */
++	if (off >= OFFSETOF(pci_config_regs, base[0]) && off <= OFFSETOF(pci_config_regs, base[3]) &&
++	    len == 4 && *((uint32 *) buf) == ~0) {
++		coreidx = sb_coreidx(sbh);
++		if ((regs = sb_setcoreidx(sbh, dev))) {
++			sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
++			/* Highest numbered address match register */
++			n = (R_REG(&sb->sbidlow) & SBIDL_AR_MASK) >> SBIDL_AR_SHIFT;
++			if (off == OFFSETOF(pci_config_regs, base[0]))
++				cfg->base[0] = ~(sb_size(R_REG(&sb->sbadmatch0)) - 1);
++			/*else if (off == OFFSETOF(pci_config_regs, base[1]) && n >= 1)
++				cfg->base[1] = ~(sb_size(R_REG(&sb->sbadmatch1)) - 1);
++			else if (off == OFFSETOF(pci_config_regs, base[2]) && n >= 2)
++				cfg->base[2] = ~(sb_size(R_REG(&sb->sbadmatch2)) - 1);
++			else if (off == OFFSETOF(pci_config_regs, base[3]) && n >= 3)
++				cfg->base[3] = ~(sb_size(R_REG(&sb->sbadmatch3)) - 1);*/
++		}
++		sb_setcoreidx(sbh, coreidx);
++		return 0;
++	}
 +
-+/*
-+ * R4x00 interrupt enable / cause bits
-+ */
-+#undef IE_SW0
-+#undef IE_SW1
-+#undef IE_IRQ0
-+#undef IE_IRQ1
-+#undef IE_IRQ2
-+#undef IE_IRQ3
-+#undef IE_IRQ4
-+#undef IE_IRQ5
-+#define IE_SW0		(1<< 8)
-+#define IE_SW1		(1<< 9)
-+#define IE_IRQ0		(1<<10)
-+#define IE_IRQ1		(1<<11)
-+#define IE_IRQ2		(1<<12)
-+#define IE_IRQ3		(1<<13)
-+#define IE_IRQ4		(1<<14)
-+#define IE_IRQ5		(1<<15)
++	if (len == 4)
++		*((uint32 *)((ulong) cfg + off)) = htol32(*((uint32 *) buf));
++	else if (len == 2)
++		*((uint16 *)((ulong) cfg + off)) = htol16(*((uint16 *) buf));
++	else if (len == 1)
++		*((uint8 *)((ulong) cfg + off)) = *((uint8 *) buf);
++	else
++		return -1;
 +
-+/*
-+ * Bitfields in the R4xx0 cp0 status register
-+ */
-+#define ST0_IE			0x00000001
-+#define ST0_EXL			0x00000002
-+#define ST0_ERL			0x00000004
-+#define ST0_KSU			0x00000018
-+#  define KSU_USER		0x00000010
-+#  define KSU_SUPERVISOR	0x00000008
-+#  define KSU_KERNEL		0x00000000
-+#define ST0_UX			0x00000020
-+#define ST0_SX			0x00000040
-+#define ST0_KX 			0x00000080
-+#define ST0_DE			0x00010000
-+#define ST0_CE			0x00020000
++	return 0;
++}
 +
-+/*
-+ * Status register bits available in all MIPS CPUs.
-+ */
-+#define ST0_IM			0x0000ff00
-+#define ST0_CH			0x00040000
-+#define ST0_SR			0x00100000
-+#define ST0_TS			0x00200000
-+#define ST0_BEV			0x00400000
-+#define ST0_RE			0x02000000
-+#define ST0_FR			0x04000000
-+#define ST0_CU			0xf0000000
-+#define ST0_CU0			0x10000000
-+#define ST0_CU1			0x20000000
-+#define ST0_CU2			0x40000000
-+#define ST0_CU3			0x80000000
-+#define ST0_XX			0x80000000	/* MIPS IV naming */
++int
++sbpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++{
++	if (bus == 0)
++		return sb_read_config(sbh, bus, dev, func, off, buf, len);
++	else
++		return extpci_read_config(sbh, bus, dev, func, off, buf, len);
++}
 +
-+/*
-+ * Cache Operations
-+ */
++int
++sbpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++{
++	if (bus == 0)
++		return sb_write_config(sbh, bus, dev, func, off, buf, len);
++	else
++		return extpci_write_config(sbh, bus, dev, func, off, buf, len);
++}
 +
-+#ifndef Fill_I
-+#define Fill_I			0x14
-+#endif
++void
++sbpci_ban(uint16 core)
++{
++	if (pci_banned < ARRAYSIZE(pci_ban))
++		pci_ban[pci_banned++] = core;
++}
 +
-+#define cache_unroll(base,op)			\
-+	__asm__ __volatile__("			\
-+		.set noreorder;			\
-+		.set mips3;			\
-+		cache %1, (%0);			\
-+		.set mips0;			\
-+		.set reorder"			\
-+		:				\
-+		: "r" (base),			\
-+		  "i" (op));
-+
-+/* 
-+ * These are the UART port assignments, expressed as offsets from the base
-+ * register.  These assignments should hold for any serial port based on
-+ * a 8250, 16450, or 16550(A).
-+ */
-+
-+#define UART_MCR	4	/* Out: Modem Control Register */
-+#define UART_MSR	6	/* In:  Modem Status Register */
-+#define UART_MCR_LOOP	0x10	/* Enable loopback test mode */
-+
-+/* 
-+ * Returns TRUE if an external UART exists at the given base
-+ * register.
-+ */
-+static bool
-+serial_exists(uint8 *regs)
-+{
-+	uint8 save_mcr, status1;
-+
-+	save_mcr = R_REG(&regs[UART_MCR]);
-+	W_REG(&regs[UART_MCR], UART_MCR_LOOP | 0x0a);
-+	status1 = R_REG(&regs[UART_MSR]) & 0xf0;
-+	W_REG(&regs[UART_MCR], save_mcr);
-+
-+	return (status1 == 0x90);
-+}
-+
-+/* 
-+ * Initializes UART access. The callback function will be called once
-+ * per found UART.
-+*/
-+void
-+sb_serial_init(void *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift))
++int __init
++sbpci_init(void *sbh)
 +{
++	uint chip, chiprev, chippkg, coreidx, host, i;
++	sbpciregs_t *pci;
++	sbconfig_t *sb;
++	pci_config_regs *cfg;
 +	void *regs;
-+	ulong base;
-+	uint irq;
-+	int i, n;
-+
-+	if ((regs = sb_setcore(sbh, SB_EXTIF, 0))) {
-+		extifregs_t *eir = (extifregs_t *) regs;
-+		sbconfig_t *sb;
-+
-+		/* Determine external UART register base */
-+		sb = (sbconfig_t *)((ulong) eir + SBCONFIGOFF);
-+		base = EXTIF_CFGIF_BASE(sb_base(R_REG(&sb->sbadmatch1)));
-+
-+		/* Determine IRQ */
-+		irq = sb_irq(sbh);
++	char varname[8];
++	uint wlidx = 0;
++	uint16 vendor, core;
++	uint8 class, subclass, progif;
++	uint32 val;
++	uint32 sbips_int_mask[] = { 0, SBIPS_INT1_MASK, SBIPS_INT2_MASK, SBIPS_INT3_MASK, SBIPS_INT4_MASK };
++	uint32 sbips_int_shift[] = { 0, 0, SBIPS_INT2_SHIFT, SBIPS_INT3_SHIFT, SBIPS_INT4_SHIFT };
 +
-+		/* Disable GPIO interrupt initially */
-+		W_REG(&eir->gpiointpolarity, 0);
-+		W_REG(&eir->gpiointmask, 0);
++	chip = sb_chip(sbh);
++	chiprev = sb_chiprev(sbh);
++	chippkg = sb_chippkg(sbh);
++	coreidx = sb_coreidx(sbh);
 +
-+		/* Search for external UARTs */
-+		n = 2;
-+		for (i = 0; i < 2; i++) {
-+			regs = (void *) REG_MAP(base + (i * 8), 8);
-+			if (serial_exists(regs)) {
-+				/* Set GPIO 1 to be the external UART IRQ */
-+				W_REG(&eir->gpiointmask, 2);
-+				if (add)
-+					add(regs, irq, 13500000, 0);
-+			}
-+		}
++	if (!(pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0)))
++		return -1;
++	sb_core_reset(sbh, 0);
 +
-+		/* Add internal UART if enabled */
-+		if (R_REG(&eir->corecontrol) & CC_UE)
-+			if (add)
-+				add((void *) &eir->uartdata, irq, sb_clock(sbh), 2);
-+	} else if ((regs = sb_setcore(sbh, SB_CC, 0))) {
-+		chipcregs_t *cc = (chipcregs_t *) regs;
-+		uint32 rev, cap, pll, baud_base, div;
++	if (((chip == BCM4310_DEVICE_ID) && (chiprev == 0)) ||
++	    ((chip == BCM4712_DEVICE_ID) && (chippkg == BCM4712SMALL_PKG_ID)))
++		host = 0;
++	else
++		host = !BUSPROBE(val, &pci->control);
 +
-+		/* Determine core revision and capabilities */
-+		rev = sb_corerev(sbh);
-+		cap = R_REG(&cc->capabilities);
-+		pll = cap & CAP_PLL_MASK;
++	if (!host) {
++		/* Disable PCI interrupts in client mode */
++		sb = (sbconfig_t *)((ulong) pci + SBCONFIGOFF);
++		W_REG(&sb->sbintvec, 0);
 +
-+		/* Determine IRQ */
-+		irq = sb_irq(sbh);
++		/* Disable the PCI bridge in client mode */
++		sbpci_ban(SB_PCI);
++		printf("PCI: Disabled\n");
++	} else {
++		/* Reset the external PCI bus and enable the clock */
++		W_REG(&pci->control, 0x5);		/* enable the tristate drivers */
++		W_REG(&pci->control, 0xd);		/* enable the PCI clock */
++		OSL_DELAY(100);				/* delay 100 us */
++		W_REG(&pci->control, 0xf);		/* deassert PCI reset */
++		W_REG(&pci->arbcontrol, PCI_INT_ARB);	/* use internal arbiter */
++		OSL_DELAY(1);				/* delay 1 us */
 +
-+		if (pll == PLL_TYPE1) {
-+			/* PLL clock */
-+			baud_base = sb_clock_rate(pll,
-+						  R_REG(&cc->clockcontrol_n),
-+						  R_REG(&cc->clockcontrol_m2));
-+			div = 1;
-+		} else if (rev >= 3) {
-+			/* Internal backplane clock */
-+			baud_base = sb_clock_rate(pll,
-+						  R_REG(&cc->clockcontrol_n),
-+						  R_REG(&cc->clockcontrol_sb));
-+			div = 2;	/* Minimum divisor */
-+			W_REG(&cc->uart_clkdiv, div);
-+		} else {
-+			/* Fixed internal backplane clock */
-+			baud_base = 88000000;
-+			div = 48;
++		/* Enable CardBusMode */
++		cardbus = nvram_match("cardbus", "1");
++		if (cardbus) {
++			printf("PCI: Enabling CardBus\n");
++			/* GPIO 1 resets the CardBus device on bcm94710ap */
++			sb_gpioout(sbh, 1, 1);
++			sb_gpioouten(sbh, 1, 1);
++			W_REG(&pci->sprom[0], R_REG(&pci->sprom[0]) | 0x400);
 +		}
 +
-+		/* Clock source depends on strapping if UartClkOverride is unset */
-+		if ((rev > 0) && ((R_REG(&cc->corecontrol) & CC_UARTCLKO) == 0)) {
-+			if ((cap & CAP_UCLKSEL) == CAP_UINTCLK) {
-+				/* Internal divided backplane clock */
-+				baud_base /= div;
-+			} else {
-+				/* Assume external clock of 1.8432 MHz */
-+				baud_base = 1843200;
-+			}
-+		}
++		/* 64 MB I/O access window */
++		W_REG(&pci->sbtopci0, SBTOPCI_IO);
++		/* 64 MB configuration access window */
++		W_REG(&pci->sbtopci1, SBTOPCI_CFG0);
++		/* 1 GB memory access window */
++		W_REG(&pci->sbtopci2, SBTOPCI_MEM | SB_PCI_DMA);
 +
-+		/* Add internal UARTs */
-+		n = cap & CAP_UARTS_MASK;
-+		for (i = 0; i < n; i++) {
-+			/* Register offset changed after revision 0 */
-+			if (rev)
-+				regs = (void *)((ulong) &cc->uart0data + (i * 256));
-+			else
-+				regs = (void *)((ulong) &cc->uart0data + (i * 8));
++		/* Enable PCI bridge BAR0 prefetch and burst */
++		val = 6;
++		sbpci_write_config(sbh, 1, 0, 0, PCI_CFG_CMD, &val, sizeof(val));
 +
-+			if (add)
-+				add(regs, irq, baud_base, 0);
-+		}
++		/* Enable PCI interrupts */
++		W_REG(&pci->intmask, PCI_INTA);
 +	}
-+}
-+
-+/* Returns the SB interrupt flag of the current core. */
-+uint32
-+sb_flag(void *sbh)
-+{
-+	void *regs;
-+	sbconfig_t *sb;
-+
-+	regs = sb_coreregs(sbh);
-+	sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
-+
-+	return (R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK);
-+}
-+
-+static const uint32 sbips_int_mask[] = {
-+	0,
-+	SBIPS_INT1_MASK,
-+	SBIPS_INT2_MASK,
-+	SBIPS_INT3_MASK,
-+	SBIPS_INT4_MASK
-+};
-+
-+static const uint32 sbips_int_shift[] = {
-+	0,
-+	0,
-+	SBIPS_INT2_SHIFT,
-+	SBIPS_INT3_SHIFT,
-+	SBIPS_INT4_SHIFT
-+};
-+
-+/* 
-+ * Returns the MIPS IRQ assignment of the current core. If unassigned,
-+ * 0 is returned.
-+ */
-+uint
-+sb_irq(void *sbh)
-+{
-+	uint idx;
-+	void *regs;
-+	sbconfig_t *sb;
-+	uint32 flag, sbipsflag;
-+	uint irq = 0;
-+
-+	flag = sb_flag(sbh);
-+
-+	idx = sb_coreidx(sbh);
 +
-+	if ((regs = sb_setcore(sbh, SB_MIPS, 0)) ||
-+	    (regs = sb_setcore(sbh, SB_MIPS33, 0))) {
++	/* Scan the SB bus */
++	bzero(sb_config_regs, sizeof(sb_config_regs));
++	for (cfg = sb_config_regs; cfg < &sb_config_regs[SB_MAXCORES]; cfg++) {
++		cfg->vendor = 0xffff;
++		if (!(regs = sb_setcoreidx(sbh, cfg - sb_config_regs)))
++			continue;
 +		sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
 +
-+		/* sbipsflag specifies which core is routed to interrupts 1 to 4 */
-+		sbipsflag = R_REG(&sb->sbipsflag);
-+		for (irq = 1; irq <= 4; irq++) {
-+			if (((sbipsflag & sbips_int_mask[irq]) >> sbips_int_shift[irq]) == flag)
-+				break;
-+		}
-+		if (irq == 5)
-+			irq = 0;
-+	}
++		/* Read ID register and parse vendor and core */
++		val = R_REG(&sb->sbidhigh);
++		vendor = (val & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT;
++		core = (val & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT;
++		progif = 0;
 +
-+	sb_setcoreidx(sbh, idx);
++		/* Check if this core is banned */
++		for (i = 0; i < pci_banned; i++)
++			if (core == pci_ban[i])
++				break;
++		if (i < pci_banned)
++			continue;
 +
-+	return irq;
-+}
++		/* Known vendor translations */
++		switch (vendor) {
++		case SB_VEND_BCM:
++			vendor = VENDOR_BROADCOM;
++			break;
++		}
 +
-+/* Clears the specified MIPS IRQ. */
-+static void
-+sb_clearirq(void *sbh, uint irq)
-+{
-+	void *regs;
-+	sbconfig_t *sb;
++		/* Determine class based on known core codes */
++		switch (core) {
++		case SB_ILINE20:
++			class = PCI_CLASS_NET;
++			subclass = PCI_NET_ETHER;
++			core = BCM47XX_ILINE_ID;
++			break;
++		case SB_ILINE100:
++			class = PCI_CLASS_NET;
++			subclass = PCI_NET_ETHER;
++			core = BCM4610_ILINE_ID;
++			break;
++		case SB_ENET:
++			class = PCI_CLASS_NET;
++			subclass = PCI_NET_ETHER;
++			core = BCM47XX_ENET_ID;
++			break;
++		case SB_SDRAM:
++		case SB_MEMC:
++			class = PCI_CLASS_MEMORY;
++			subclass = PCI_MEMORY_RAM;
++			break;
++		case SB_PCI:
++			class = PCI_CLASS_BRIDGE;
++			subclass = PCI_BRIDGE_PCI;
++			//break;
++		case SB_MIPS:
++		case SB_MIPS33:
++			class = PCI_CLASS_CPU;
++			subclass = PCI_CPU_MIPS;
++			break;
++		case SB_CODEC:
++			class = PCI_CLASS_COMM;
++			subclass = PCI_COMM_MODEM;
++			core = BCM47XX_V90_ID;
++			break;
++		case SB_USB:
++			class = PCI_CLASS_SERIAL;
++			subclass = PCI_SERIAL_USB;
++			progif = 0x10; /* OHCI */
++			core = BCM47XX_USB_ID;
++			break;
++		case SB_USB11H:
++			class = PCI_CLASS_SERIAL;
++			subclass = PCI_SERIAL_USB;
++			progif = 0x10; /* OHCI */
++			core = BCM47XX_USBH_ID;
++			break;
++		case SB_USB11D:
++			class = PCI_CLASS_SERIAL;
++			subclass = PCI_SERIAL_USB;
++			core = BCM47XX_USBD_ID;
++			break;
++		case SB_IPSEC:
++			class = PCI_CLASS_CRYPT;
++			subclass = PCI_CRYPT_NETWORK;
++			core = BCM47XX_IPSEC_ID;
++			break;
++		case SB_EXTIF:
++		case SB_CC:
++			class = PCI_CLASS_MEMORY;
++			subclass = PCI_MEMORY_FLASH;
++			break;
++		case SB_D11:
++			class = PCI_CLASS_NET;
++			subclass = PCI_NET_OTHER;
++			/* Let an nvram variable override this */
++			sprintf(varname, "wl%did", wlidx);
++			wlidx++;
++			if ((core = getintvar(NULL, varname)) == 0) {
++				if (chip == BCM4712_DEVICE_ID) {
++					if (chippkg == BCM4712SMALL_PKG_ID)
++						core = BCM4306_D11G_ID;
++					else
++						core = BCM4306_D11DUAL_ID;
++				} else {
++					/* 4310 */
++					core = BCM4310_D11B_ID;
++				}
++			}
++			break;
 +
-+	if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) &&
-+	    !(regs = sb_setcore(sbh, SB_MIPS33, 0)))
-+		ASSERT(regs);
-+	sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
++		default:
++			class = subclass = progif = 0xff;
++			break;
++		}
 +
-+	if (irq == 0)
-+		W_REG(&sb->sbintvec, 0);
-+	else
-+		OR_REG(&sb->sbipsflag, sbips_int_mask[irq]);
++		/* Supported translations */
++		cfg->vendor = htol16(vendor);
++		cfg->device = htol16(core);
++		cfg->rev_id = chiprev;
++		cfg->prog_if = progif;
++		cfg->sub_class = subclass;
++		cfg->base_class = class;
++		cfg->base[0] = htol32(sb_base(R_REG(&sb->sbadmatch0)));
++		cfg->base[1] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch1)))*/;
++		cfg->base[2] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch2)))*/;
++		cfg->base[3] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch3)))*/;
++		cfg->base[4] = 0;
++		cfg->base[5] = 0;
++		if (class == PCI_CLASS_BRIDGE && subclass == PCI_BRIDGE_PCI)
++			cfg->header_type = PCI_HEADER_BRIDGE;
++		else
++			cfg->header_type = PCI_HEADER_NORMAL;
++		/* Save core interrupt flag */
++		cfg->int_pin = R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK;
++		/* Default to MIPS shared interrupt 0 */
++		cfg->int_line = 0;
++		/* MIPS sbipsflag maps core interrupt flags to interrupts 1 through 4 */
++		if ((regs = sb_setcore(sbh, SB_MIPS, 0)) ||
++		    (regs = sb_setcore(sbh, SB_MIPS33, 0))) {
++			sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
++			val = R_REG(&sb->sbipsflag);
++			for (cfg->int_line = 1; cfg->int_line <= 4; cfg->int_line++) {
++				if (((val & sbips_int_mask[cfg->int_line]) >> sbips_int_shift[cfg->int_line]) == cfg->int_pin)
++					break;
++			}
++			if (cfg->int_line > 4)
++				cfg->int_line = 0;
++		}
++		/* Emulated core */
++		*((uint32 *) &cfg->sprom_control) = 0xffffffff;
++	}
++
++	sb_setcoreidx(sbh, coreidx);
++	return 0;
 +}
 +
-+/* 
-+ * Assigns the specified MIPS IRQ to the specified core. Shared MIPS
-+ * IRQ 0 may be assigned more than once.
-+ */
-+static void
-+sb_setirq(void *sbh, uint irq, uint coreid, uint coreunit)
++void
++sbpci_check(void *sbh)
 +{
-+	void *regs;
-+	sbconfig_t *sb;
-+	uint32 flag;
-+
-+	regs = sb_setcore(sbh, coreid, coreunit);
-+	ASSERT(regs);
-+	flag = sb_flag(sbh);
++	uint coreidx;
++	sbpciregs_t *pci;
++	uint32 sbtopci1;
++	uint32 buf[64], *ptr, i;
++	ulong pa;
++	volatile uint j;
 +
-+	if (!(regs = sb_setcore(sbh, SB_MIPS, 0)) &&
-+	    !(regs = sb_setcore(sbh, SB_MIPS33, 0)))
-+		ASSERT(regs);
-+	sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
++	coreidx = sb_coreidx(sbh);
++	pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0);
 +
-+	if (irq == 0)
-+		OR_REG(&sb->sbintvec, 1 << flag);
-+	else {
-+		flag <<= sbips_int_shift[irq];
-+		ASSERT(!(flag & ~sbips_int_mask[irq]));
-+		flag |= R_REG(&sb->sbipsflag) & ~sbips_int_mask[irq];
-+		W_REG(&sb->sbipsflag, flag);
-+	}
-+}	
++	/* Clear the test array */
++	pa = (ulong) DMA_MAP(NULL, buf, sizeof(buf), DMA_RX, NULL);
++	ptr = (uint32 *) OSL_UNCACHED(&buf[0]);
++	memset(ptr, 0, sizeof(buf));
 +
-+/* 
-+ * Initializes clocks and interrupts. SB and NVRAM access must be
-+ * initialized prior to calling.
-+ */
-+void
-+sb_mips_init(void *sbh)
-+{
-+	ulong hz, ns, tmp;
-+	extifregs_t *eir;
-+	chipcregs_t *cc;
-+	char *value;
-+	uint irq;
++	/* Point PCI window 1 to memory */
++	sbtopci1 = R_REG(&pci->sbtopci1);
++	W_REG(&pci->sbtopci1, SBTOPCI_MEM | (pa & SBTOPCI1_MASK));
 +
-+	/* Figure out current SB clock speed */
-+	if ((hz = sb_clock(sbh)) == 0)
-+		hz = 100000000;
-+	ns = 1000000000 / hz;
++	/* Fill the test array via PCI window 1 */
++	ptr = (uint32 *) REG_MAP(SB_PCI_CFG + (pa & ~SBTOPCI1_MASK), sizeof(buf));
++	for (i = 0; i < ARRAYSIZE(buf); i++) {
++		for (j = 0; j < 2; j++);
++		W_REG(&ptr[i], i);
++	}
++	REG_UNMAP(ptr);
 +
-+	/* Setup external interface timing */
-+	if ((eir = sb_setcore(sbh, SB_EXTIF, 0))) {
-+		/* Initialize extif so we can get to the LEDs and external UART */
-+		W_REG(&eir->prog_config, CF_EN);
++	/* Restore PCI window 1 */
++	W_REG(&pci->sbtopci1, sbtopci1);
 +
-+		/* Set timing for the flash */
-+		tmp = CEIL(10, ns) << FW_W3_SHIFT;	/* W3 = 10nS */
-+		tmp = tmp | (CEIL(40, ns) << FW_W1_SHIFT); /* W1 = 40nS */
-+		tmp = tmp | CEIL(120, ns);		/* W0 = 120nS */
-+		W_REG(&eir->prog_waitcount, tmp);	/* 0x01020a0c for a 100Mhz clock */
++	/* Check the test array */
++	DMA_UNMAP(NULL, pa, sizeof(buf), DMA_RX, NULL);
++	ptr = (uint32 *) OSL_UNCACHED(&buf[0]);
++	for (i = 0; i < ARRAYSIZE(buf); i++) {
++		if (ptr[i] != i)
++			break;
++	}
 +
-+		/* Set programmable interface timing for external uart */
-+		tmp = CEIL(10, ns) << FW_W3_SHIFT;	/* W3 = 10nS */
-+		tmp = tmp | (CEIL(20, ns) << FW_W2_SHIFT); /* W2 = 20nS */
-+		tmp = tmp | (CEIL(100, ns) << FW_W1_SHIFT); /* W1 = 100nS */
-+		tmp = tmp | CEIL(120, ns);		/* W0 = 120nS */
-+		W_REG(&eir->prog_waitcount, tmp);	/* 0x01020a0c for a 100Mhz clock */
-+	} else if ((cc = sb_setcore(sbh, SB_CC, 0))) {
-+		/* Set timing for the flash */
-+		tmp = CEIL(10, ns) << FW_W3_SHIFT;	/* W3 = 10nS */
-+		tmp |= CEIL(10, ns) << FW_W1_SHIFT;	/* W1 = 10nS */
-+		tmp |= CEIL(120, ns);			/* W0 = 120nS */
-+		W_REG(&cc->parallelflashwaitcnt, tmp);
++	/* Change the clock if the test fails */
++	if (i < ARRAYSIZE(buf)) {
++		uint32 req, cur;
 +
-+		W_REG(&cc->cs01memwaitcnt, tmp);
++		cur = sb_clock(sbh);
++		printf("PCI: Test failed at %d MHz\n", (cur + 500000) / 1000000);
++		for (req = 104000000; req < 176000000; req += 4000000) {
++			printf("PCI: Resetting to %d MHz\n", (req + 500000) / 1000000);
++			/* This will only reset if the clocks are valid and have changed */
++			sb_mips_setclock(sbh, req, 0, 0);
++		}
++		/* Should not reach here */
++		ASSERT(0);
 +	}
 +
-+	/* Chip specific initialization */
-+	switch (sb_chip(sbh)) {
-+	case BCM4710_DEVICE_ID:
-+		/* Clear interrupt map */
-+		for (irq = 0; irq <= 4; irq++)
-+			sb_clearirq(sbh, irq);
-+		sb_setirq(sbh, 0, SB_CODEC, 0);
-+		sb_setirq(sbh, 0, SB_EXTIF, 0);
-+		sb_setirq(sbh, 2, SB_ENET, 1);
-+		sb_setirq(sbh, 3, SB_ILINE20, 0);
-+		sb_setirq(sbh, 4, SB_PCI, 0);
-+		ASSERT(eir);
-+		value = nvram_get("et0phyaddr");
-+		if (value && !strcmp(value, "31")) {
-+			/* Enable internal UART */
-+			W_REG(&eir->corecontrol, CC_UE);
-+			/* Give USB its own interrupt */
-+			sb_setirq(sbh, 1, SB_USB, 0);
-+		} else {
-+			/* Disable internal UART */
-+			W_REG(&eir->corecontrol, 0);
-+			/* Give Ethernet its own interrupt */
-+			sb_setirq(sbh, 1, SB_ENET, 0);
-+			sb_setirq(sbh, 0, SB_USB, 0);
-+		}
-+		break;
-+	case BCM4310_DEVICE_ID:
-+		MTC0(C0_BROADCOM, 0, MFC0(C0_BROADCOM, 0) & ~(1 << 22));
-+		break;
-+	}
++	sb_setcoreidx(sbh, coreidx);
 +}
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbutils.c
+--- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbutils.c	2005-09-16 10:29:18.172592248 +0200
+@@ -0,0 +1,1895 @@
++/*
++ * Misc utility routines for accessing chip-specific features
++ * of the SiliconBackplane-based Broadcom chips.
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ * 
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id: sbutils.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
++ */
 +
-+uint32
-+sb_mips_clock(void *sbh)
-+{
-+	extifregs_t *eir;
-+	chipcregs_t *cc;
-+	uint32 n, m;
-+	uint idx;
-+	uint32 pll_type, rate = 0;
++#include <typedefs.h>
++#include <osl.h>
++#include <bcmutils.h>
++#include <bcmdevs.h>
++#include <sbconfig.h>
++#include <sbchipc.h>
++#include <sbpci.h>
++#include <pcicfg.h>
++#include <sbpcmcia.h>
++#include <sbextif.h>
++#include <sbutils.h>
++#include <bcmsrom.h>
 +
-+	/* get index of the current core */
-+	idx = sb_coreidx(sbh);
-+	pll_type = PLL_TYPE1;
++/* debug/trace */
++#define	SB_ERROR(args)
 +
-+	/* switch to extif or chipc core */
-+	if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
-+		n = R_REG(&eir->clockcontrol_n);
-+		m = R_REG(&eir->clockcontrol_sb);
-+	} else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
-+		pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK;
-+		n = R_REG(&cc->clockcontrol_n);
-+		if ((pll_type == PLL_TYPE2) || (pll_type == PLL_TYPE4))
-+			m = R_REG(&cc->clockcontrol_mips);
-+		else if (pll_type == PLL_TYPE3) {
-+			rate = 200000000;
-+			goto out;
-+		} else
-+			m = R_REG(&cc->clockcontrol_sb);
-+	} else
-+		goto out;
++typedef uint32 (*sb_intrsoff_t)(void *intr_arg);
++typedef void (*sb_intrsrestore_t)(void *intr_arg, uint32 arg);
 +
-+	/* calculate rate */
-+	rate = sb_clock_rate(pll_type, n, m);
++/* misc sb info needed by some of the routines */
++typedef struct sb_info {
++	uint	chip;			/* chip number */
++	uint	chiprev;		/* chip revision */
++	uint	chippkg;		/* chip package option */
++	uint	boardtype;		/* board type */
++	uint	boardvendor;		/* board vendor id */
++	uint	bus;			/* what bus type we are going through */
 +
-+out:
-+	/* switch back to previous core */
-+	sb_setcoreidx(sbh, idx);
++	void	*osh;			/* osl os handle */
++	void	*sdh;			/* bcmsdh handle */
 +
-+	return rate;
-+}
++	void	*curmap;		/* current regs va */
++	void	*regs[SB_MAXCORES];	/* other regs va */
 +
-+static void
-+icache_probe(int *size, int *lsize)
-+{
-+	uint32 config1;
-+	uint sets, ways;
++	uint	curidx;			/* current core index */
++	uint	dev_coreid;		/* the core provides driver functions */
++	uint	pciidx;			/* pci core index */
++	uint	pcirev;			/* pci core rev */
 +
-+	config1 = MFC0(C0_CONFIG, 1);
++	uint	pcmciaidx;		/* pcmcia core index */
++	uint	pcmciarev;		/* pcmcia core rev */
++	bool	memseg;			/* flag to toggle MEM_SEG register */
 +
-+	/* Instruction Cache Size = Associativity * Line Size * Sets Per Way */
-+	if ((*lsize = ((config1 >> 19) & 7)))
-+		*lsize = 2 << *lsize;
-+	sets = 64 << ((config1 >> 22) & 7);
-+	ways = 1 + ((config1 >> 16) & 7);
-+	*size = *lsize * sets * ways;
-+}
++	uint	ccrev;			/* chipc core rev */
 +
-+#define ALLINTS (IE_IRQ0 | IE_IRQ1 | IE_IRQ2 | IE_IRQ3 | IE_IRQ4)
++	uint	gpioidx;		/* gpio control core index */
++	uint	gpioid;			/* gpio control coretype */
 +
-+static void
-+handler(void)
++	uint	numcores;		/* # discovered cores */
++	uint	coreid[SB_MAXCORES];	/* id of each core */
++
++	void	*intr_arg;		/* interrupt callback function arg */
++	sb_intrsoff_t		intrsoff_fn;		/* function turns chip interrupts off */
++	sb_intrsrestore_t	intrsrestore_fn;	/* function restore chip interrupts */
++} sb_info_t;
++
++/* local prototypes */
++static void* sb_doattach(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz);
++static void sb_scan(sb_info_t *si);
++static uint sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val);
++static uint _sb_coreidx(void *sbh);
++static uint sb_findcoreidx(void *sbh, uint coreid, uint coreunit);
++static uint sb_pcidev2chip(uint pcidev);
++static uint sb_chip2numcores(uint chip);
++
++#define	SB_INFO(sbh)	(sb_info_t*)sbh
++#define	SET_SBREG(sbh, r, mask, val)	W_SBREG((sbh), (r), ((R_SBREG((sbh), (r)) & ~(mask)) | (val)))
++#define	GOODCOREADDR(x)	(((x) >= SB_ENUM_BASE) && ((x) <= SB_ENUM_LIM) \
++				&& ISALIGNED((x), SB_CORE_SIZE))
++#define	GOODREGS(regs)	(regs && ISALIGNED(regs, SB_CORE_SIZE))
++#define	REGS2SB(va)	(sbconfig_t*) ((uint)(va) + SBCONFIGOFF)
++#define	GOODIDX(idx)	(((uint)idx) < SB_MAXCORES)
++#define	BADIDX		(SB_MAXCORES+1)
++
++#define	R_SBREG(sbh, sbr)	sb_read_sbreg((sbh), (sbr))
++#define	W_SBREG(sbh, sbr, v)	sb_write_sbreg((sbh), (sbr), (v))
++#define	AND_SBREG(sbh, sbr, v)	W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) & (v)))
++#define	OR_SBREG(sbh, sbr, v)	W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) | (v)))
++
++/* 
++ * Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts before/
++ * after core switching to avoid invalid register accesss inside ISR.
++ */
++#define INTR_OFF(si, intr_val) \
++	if ((si)->intrsoff_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) {	\
++		intr_val = (*(si)->intrsoff_fn)((si)->intr_arg); }
++#define INTR_RESTORE(si, intr_val) \
++	if ((si)->intrsrestore_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) {	\
++		(*(si)->intrsrestore_fn)((si)->intr_arg, intr_val); }
++
++/* power control defines */
++#define	PLL_DELAY	150			/* 150us pll on delay */
++#define	FREF_DELAY	15			/* 15us fref change delay */
++#define	LPOMINFREQ	25000			/* low power oscillator min */
++#define	LPOMAXFREQ	43000			/* low power oscillator max */
++#define	XTALMINFREQ	19800000		/* 20mhz - 1% */
++#define	XTALMAXFREQ	20200000		/* 20mhz + 1% */
++#define	PCIMINFREQ	25000000		/* 25mhz */
++#define	PCIMAXFREQ	34000000		/* 33mhz + fudge */
++
++#define SCC_LOW2FAST_LIMIT	5000	/* turn on fast clock time, in unit of ms */
++
++
++static uint32
++sb_read_sbreg(void *sbh, volatile uint32 *sbr)
 +{
-+	/* Step 11 */
-+	__asm__ (
-+		".set\tmips32\n\t"
-+		"ssnop\n\t"
-+		"ssnop\n\t"
-+	/* Disable interrupts */
-+	/*	MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~(ALLINTS | STO_IE)); */
-+		"mfc0 $15, $12\n\t"
-+		"and $15, $15, -31746\n\t"
-+		"mtc0 $15, $12\n\t"
-+		"eret\n\t"
-+		"nop\n\t"
-+		"nop\n\t"
-+		".set\tmips0"
-+	);
++	sb_info_t *si;
++	uint8 tmp;
++	uint32 val, intr_val = 0;
++
++	si = SB_INFO(sbh);
++
++	/* 
++	 * compact flash only has 11 bits address, while we needs 12 bits address.
++	 * MEM_SEG will be OR'd with other 11 bits address in hardware, 
++	 * so we program MEM_SEG with 12th bit when necessary(access sb regsiters).
++	 * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special
++	 */
++	if(si->memseg) {
++		INTR_OFF(si, intr_val);
++		tmp = 1;
++		OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
++		(uint32)sbr &= ~(1 << 11);	/* mask out bit 11*/
++	}
++
++	val = R_REG(sbr);
++	
++	if(si->memseg) {
++		tmp = 0;
++		OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
++		INTR_RESTORE(si, intr_val);
++	}
++
++	return (val);
 +}
 +
-+/* The following MUST come right after handler() */
 +static void
-+afterhandler(void)
++sb_write_sbreg(void *sbh, volatile uint32 *sbr, uint32 v)
 +{
-+}
++	sb_info_t *si;
++	uint8 tmp;
++	volatile uint32 dummy;
++	uint32 intr_val = 0;
 +
-+/*
-+ * Set the MIPS, backplane and PCI clocks as closely as possible.
-+ */
-+bool
-+sb_mips_setclock(void *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock)
-+{
-+	extifregs_t *eir = NULL;
-+	chipcregs_t *cc = NULL;
-+	mipsregs_t *mipsr = NULL;
-+	volatile uint32 *clockcontrol_n, *clockcontrol_sb, *clockcontrol_pci;
-+	uint32 orig_n, orig_sb, orig_pci, orig_m2, orig_mips, orig_ratio_parm, new_ratio;
-+	uint32 pll_type, sync_mode;
-+	uint idx, i;
-+	struct {
-+		uint32 mipsclock;
-+		uint16 n;
-+		uint32 sb;
-+		uint32 pci33;
-+		uint32 pci25;
-+	} type1_table[] = {
-+		{  96000000, 0x0303, 0x04020011, 0x11030011, 0x11050011 }, /*  96.000 32.000 24.000 */
-+		{ 100000000, 0x0009, 0x04020011, 0x11030011, 0x11050011 }, /* 100.000 33.333 25.000 */
-+		{ 104000000, 0x0802, 0x04020011, 0x11050009, 0x11090009 }, /* 104.000 31.200 24.960 */
-+		{ 108000000, 0x0403, 0x04020011, 0x11050009, 0x02000802 }, /* 108.000 32.400 24.923 */
-+		{ 112000000, 0x0205, 0x04020011, 0x11030021, 0x02000403 }, /* 112.000 32.000 24.889 */
-+		{ 115200000, 0x0303, 0x04020009, 0x11030011, 0x11050011 }, /* 115.200 32.000 24.000 */
-+		{ 120000000, 0x0011, 0x04020011, 0x11050011, 0x11090011 }, /* 120.000 30.000 24.000 */
-+		{ 124800000, 0x0802, 0x04020009, 0x11050009, 0x11090009 }, /* 124.800 31.200 24.960 */
-+		{ 128000000, 0x0305, 0x04020011, 0x11050011, 0x02000305 }, /* 128.000 32.000 24.000 */
-+		{ 132000000, 0x0603, 0x04020011, 0x11050011, 0x02000305 }, /* 132.000 33.000 24.750 */
-+		{ 136000000, 0x0c02, 0x04020011, 0x11090009, 0x02000603 }, /* 136.000 32.640 24.727 */
-+		{ 140000000, 0x0021, 0x04020011, 0x11050021, 0x02000c02 }, /* 140.000 30.000 24.706 */
-+		{ 144000000, 0x0405, 0x04020011, 0x01020202, 0x11090021 }, /* 144.000 30.857 24.686 */
-+		{ 150857142, 0x0605, 0x04020021, 0x02000305, 0x02000605 }, /* 150.857 33.000 24.000 */
-+		{ 152000000, 0x0e02, 0x04020011, 0x11050021, 0x02000e02 }, /* 152.000 32.571 24.000 */
-+		{ 156000000, 0x0802, 0x04020005, 0x11050009, 0x11090009 }, /* 156.000 31.200 24.960 */
-+		{ 160000000, 0x0309, 0x04020011, 0x11090011, 0x02000309 }, /* 160.000 32.000 24.000 */
-+		{ 163200000, 0x0c02, 0x04020009, 0x11090009, 0x02000603 }, /* 163.200 32.640 24.727 */
-+		{ 168000000, 0x0205, 0x04020005, 0x11030021, 0x02000403 }, /* 168.000 32.000 24.889 */
-+		{ 176000000, 0x0602, 0x04020003, 0x11050005, 0x02000602 }, /* 176.000 33.000 24.000 */
-+	};
-+	typedef struct {
-+		uint32 mipsclock;
-+		uint32 sbclock;
-+		uint16 n;
-+		uint32 sb;
-+		uint32 pci33;
-+		uint32 m2;
-+		uint32 m3;
-+		uint32 ratio;
-+		uint32 ratio_parm;
-+	} n4m_table_t;
-+
-+	n4m_table_t type2_table[] = {
-+		{ 180000000,  80000000, 0x0403, 0x01010000, 0x01020300, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
-+		{ 180000000,  90000000, 0x0403, 0x01000100, 0x01020300, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 },
-+		{ 200000000, 100000000, 0x0303, 0x01000000, 0x01000600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 },
-+		{ 211200000, 105600000, 0x0902, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
-+		{ 220800000, 110400000, 0x1500, 0x01000200, 0x01030400, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
-+		{ 230400000, 115200000, 0x0604, 0x01000200, 0x01020600, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
-+		{ 234000000, 104000000, 0x0b01, 0x01010000, 0x01010700, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
-+		{ 240000000, 120000000,	0x0803,	0x01000200, 0x01020600,	0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
-+		{ 252000000, 126000000,	0x0504,	0x01000100, 0x01020500,	0x01000100, 0x05000100, 0x21, 0x0aaa0555 },
-+		{ 264000000, 132000000, 0x0903, 0x01000200, 0x01020700, 0x01000200, 0x05000200, 0x21, 0x0aaa0555 },
-+		{ 270000000, 120000000, 0x0703, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
-+		{ 276000000, 122666666, 0x1500, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
-+		{ 280000000, 140000000, 0x0503, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 },
-+		{ 288000000, 128000000, 0x0604, 0x01010000, 0x01030400, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
-+		{ 288000000, 144000000, 0x0404, 0x01000000, 0x01010600, 0x01000000, 0x05000000, 0x21, 0x0aaa0555 },
-+		{ 300000000, 133333333, 0x0803, 0x01010000, 0x01020600, 0x01020600, 0x05000100, 0x94, 0x012a0115 },
-+		{ 300000000, 150000000, 0x0803, 0x01000100, 0x01020600, 0x01000100, 0x05000100, 0x21, 0x0aaa0555 }
-+	};
-+
-+	n4m_table_t type4_table[] = {
-+		{ 192000000,  96000000, 0x0702,	0x04020011, 0x11030011, 0x04020011, 0x04020003, 0x21, 0x0aaa0555 },
-+		{ 200000000, 100000000, 0x0009,	0x04020011, 0x11030011, 0x04020011, 0x04020003, 0x21, 0x0aaa0555 },
-+		{ 216000000, 108000000, 0x0211, 0x11020005, 0x11030303, 0x11020005, 0x04000005, 0x21, 0x0aaa0555 },
-+		{ 228000000, 101333333, 0x0e02, 0x11030003, 0x11210005, 0x11030305, 0x04000005, 0x94, 0x012a00a9 },
-+		{ 228000000, 114000000, 0x0e02, 0x11020005, 0x11210005, 0x11020005, 0x04000005, 0x21, 0x0aaa0555 },
-+		{ 240000000, 120000000,	0x0109,	0x11030002, 0x01050203,	0x11030002, 0x04000003, 0x21, 0x0aaa0555 },
-+		{ 252000000, 126000000,	0x0203,	0x04000005, 0x11050005,	0x04000005, 0x04000002, 0x21, 0x0aaa0555 },
-+		{ 264000000, 132000000, 0x0602, 0x04000005, 0x11050005, 0x04000005, 0x04000002, 0x21, 0x0aaa0555 },
-+		{ 272000000, 116571428, 0x0c02, 0x04000021, 0x02000909, 0x02000221, 0x04000003, 0x73, 0x254a14a9 },
-+		{ 280000000, 120000000, 0x0209, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 0x73, 0x254a14a9 },
-+		{ 288000000, 123428571, 0x0111, 0x04000021, 0x01030303, 0x02000221, 0x04000003, 0x73, 0x254a14a9 },
-+		{ 300000000, 120000000, 0x0009, 0x04000009, 0x01030203, 0x02000902, 0x04000002, 0x52, 0x02520129 }
-+	};
-+	uint icache_size, ic_lsize;
-+	ulong start, end, dst;
-+	bool ret = FALSE;
++	si = SB_INFO(sbh);
 +
-+	/* get index of the current core */
-+	idx = sb_coreidx(sbh);
++	/* 
++	 * compact flash only has 11 bits address, while we needs 12 bits address.
++	 * MEM_SEG will be OR'd with other 11 bits address in hardware, 
++	 * so we program MEM_SEG with 12th bit when necessary(access sb regsiters).
++	 * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special 
++	 */
++	if(si->memseg) {
++		INTR_OFF(si, intr_val);
++		tmp = 1;
++		OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
++		(uint32)sbr &= ~(1 << 11);	/* mask out bit 11 */
++	}
 +
-+	/* switch to extif or chipc core */
-+	if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
-+		pll_type = PLL_TYPE1;
-+		clockcontrol_n = &eir->clockcontrol_n;
-+		clockcontrol_sb = &eir->clockcontrol_sb;
-+		clockcontrol_pci = &eir->clockcontrol_pci;
-+	} else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
-+		pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK;
-+		clockcontrol_n = &cc->clockcontrol_n;
-+		clockcontrol_sb = &cc->clockcontrol_sb;
-+		clockcontrol_pci = &cc->clockcontrol_pci;
++	if ((si->bus == PCMCIA_BUS) || (si->bus == PCI_BUS)) {
++#ifdef IL_BIGENDIAN
++		dummy = R_REG(sbr);
++		W_REG((volatile uint16 *)((uint32)sbr + 2), (uint16)((v >> 16) & 0xffff));
++		dummy = R_REG(sbr);
++		W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff));
++#else
++		dummy = R_REG(sbr);
++		W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff));
++		dummy = R_REG(sbr);
++		W_REG((volatile uint16 *)((uint32)sbr + 2), (uint16)((v >> 16) & 0xffff));
++#endif
 +	} else
-+		goto done;
-+
-+	/* Store the current clock register values */
-+	orig_n = R_REG(clockcontrol_n);
-+	orig_sb = R_REG(clockcontrol_sb);
-+	orig_pci = R_REG(clockcontrol_pci);
++		W_REG(sbr, v);
 +
-+	if (pll_type == PLL_TYPE1) {
-+		/* Keep the current PCI clock if not specified */
-+		if (pciclock == 0) {
-+			pciclock = sb_clock_rate(pll_type, R_REG(clockcontrol_n), R_REG(clockcontrol_pci));
-+			pciclock = (pciclock <= 25000000) ? 25000000 : 33000000;
-+		}
++	if(si->memseg) {
++		tmp = 0;
++		OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
++		INTR_RESTORE(si, intr_val);
++	}
++}
 +
-+		/* Search for the closest MIPS clock less than or equal to a preferred value */
-+		for (i = 0; i < ARRAYSIZE(type1_table); i++) {
-+			ASSERT(type1_table[i].mipsclock ==
-+			       sb_clock_rate(pll_type, type1_table[i].n, type1_table[i].sb));
-+			if (type1_table[i].mipsclock > mipsclock)
-+				break;
-+		}
-+		if (i == 0) {
-+			ret = FALSE;
-+			goto done;
-+		} else {
-+			ret = TRUE;
-+			i--;
-+		}
-+		ASSERT(type1_table[i].mipsclock <= mipsclock);
++/*
++ * Allocate a sb handle.
++ * devid - pci device id (used to determine chip#)
++ * osh - opaque OS handle
++ * regs - virtual address of initial core registers
++ * bustype - pci/pcmcia/sb/sdio/etc
++ * vars - pointer to a pointer area for "environment" variables
++ * varsz - pointer to int to return the size of the vars
++ */
++void*
++sb_attach(uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz)
++{
++	sb_info_t *si;
 +
-+		/* No PLL change */
-+		if ((orig_n == type1_table[i].n) &&
-+		    (orig_sb == type1_table[i].sb) &&
-+		    (orig_pci == type1_table[i].pci33))
-+			goto done;
++	/* alloc sb_info_t */
++	if ((si = MALLOC(sizeof (sb_info_t))) == NULL) {
++		SB_ERROR(("sb_attach: malloc failed!\n"));
++		return (NULL);
++	}
 +
-+		/* Set the PLL controls */
-+		W_REG(clockcontrol_n, type1_table[i].n);
-+		W_REG(clockcontrol_sb, type1_table[i].sb);
-+		if (pciclock == 25000000)
-+			W_REG(clockcontrol_pci, type1_table[i].pci25);
-+		else
-+			W_REG(clockcontrol_pci, type1_table[i].pci33);
++	return (sb_doattach(si, devid, osh, regs, bustype, sdh, vars, varsz));
++}
 +
-+		/* Reset */
-+		sb_watchdog(sbh, 1);
-+		while (1);
-+	} else if ((pll_type == PLL_TYPE2) || (pll_type == PLL_TYPE4)) {
-+		n4m_table_t *table = (pll_type == PLL_TYPE2) ? type2_table : type4_table;
-+		uint tabsz = (pll_type == PLL_TYPE2) ? ARRAYSIZE(type2_table) : ARRAYSIZE(type4_table);
++/* global kernel resource */
++static sb_info_t ksi;
 +
-+		ASSERT(cc);
++/* generic kernel variant of sb_attach() */
++void*
++sb_kattach()
++{
++	uint32 *regs;
++	char *unused;
++	int varsz;
 +
-+		/* Store the current clock register values */
-+		orig_m2 = R_REG(&cc->clockcontrol_m2);
-+		orig_mips = R_REG(&cc->clockcontrol_mips);
-+		orig_ratio_parm = 0;
++	if (ksi.curmap == NULL) {
++		uint32 cid;
++		regs = (uint32 *)REG_MAP(SB_ENUM_BASE, SB_CORE_SIZE);
++		cid = R_REG((uint32 *)regs);
++		if ((cid == 0x08104712) || (cid == 0x08114712)) {
++			uint32 *scc, val;
 +
-+		/* Look up current ratio */
-+		for (i = 0; i < tabsz; i++) {
-+			if ((orig_n == table[i].n) &&
-+			    (orig_sb == table[i].sb) &&
-+			    (orig_pci == table[i].pci33) &&
-+			    (orig_m2 == table[i].m2) &&
-+			    (orig_mips == table[i].m3)) {
-+				orig_ratio_parm = table[i].ratio_parm;
-+				break;
-+			}
++			scc = (uint32 *)((uint32)regs + OFFSETOF(chipcregs_t, slow_clk_ctl));
++			val = R_REG(scc);
++			SB_ERROR(("    initial scc = 0x%x\n", val));
++			val |= SCC_SS_XTAL;
++			W_REG(scc, val);
 +		}
 +
-+		/* Search for the closest MIPS clock greater or equal to a preferred value */
-+		for (i = 0; i < tabsz; i++) {
-+			ASSERT(table[i].mipsclock ==
-+			       sb_clock_rate(pll_type, table[i].n, table[i].m3));
-+			if ((mipsclock <= table[i].mipsclock) &&
-+			    ((sbclock == 0) || (sbclock <= table[i].sbclock)))
-+				break;
-+		}
-+		if (i == tabsz) {
-+			ret = FALSE;
-+			goto done;
-+		} else {
-+			ret = TRUE;
-+		}
++		sb_doattach(&ksi, BCM4710_DEVICE_ID, NULL, (void*)regs,
++			    SB_BUS, NULL, &unused, &varsz);
++	}
 +
-+		/* No PLL change */
-+		if ((orig_n == table[i].n) &&
-+		    (orig_sb == table[i].sb) &&
-+		    (orig_pci == table[i].pci33) &&
-+		    (orig_m2 == table[i].m2) &&
-+		    (orig_mips == table[i].m3))
-+			goto done;
++	return &ksi;
++}
 +
-+		/* Set the PLL controls */
-+		W_REG(clockcontrol_n, table[i].n);
-+		W_REG(clockcontrol_sb, table[i].sb);
-+		W_REG(clockcontrol_pci, table[i].pci33);
-+		W_REG(&cc->clockcontrol_m2, table[i].m2);
-+		W_REG(&cc->clockcontrol_mips, table[i].m3);
++static void*
++sb_doattach(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz)
++{
++	uint origidx;
++	chipcregs_t *cc;
++	uint32 w;
 +
-+		/* No ratio change */
-+		if (orig_ratio_parm == table[i].ratio_parm)
-+			goto end_fill;
++	ASSERT(GOODREGS(regs));
 +
-+		new_ratio = table[i].ratio_parm;
-+
-+		icache_probe(&icache_size, &ic_lsize);
-+
-+		/* Preload the code into the cache */
-+		start = ((ulong) &&start_fill) & ~(ic_lsize - 1);
-+		end = ((ulong) &&end_fill + (ic_lsize - 1)) & ~(ic_lsize - 1);
-+		while (start < end) {
-+			cache_unroll(start, Fill_I);
-+			start += ic_lsize;
-+		}
++	bzero((uchar*)si, sizeof (sb_info_t));
 +
-+		/* Copy the handler */
-+		start = (ulong) &handler;
-+		end = (ulong) &afterhandler;
-+		dst = KSEG1ADDR(0x180);
-+		for (i = 0; i < (end - start); i += 4)
-+			*((ulong *)(dst + i)) = *((ulong *)(start + i));
-+		
-+		/* Preload handler into the cache one line at a time */
-+		for (i = 0; i < (end - start); i += 4)
-+			cache_unroll(dst + i, Fill_I);
++	si->pciidx = si->gpioidx = BADIDX;
 +
-+		/* Clear BEV bit */
-+		MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) & ~ST0_BEV);
++	si->osh = osh;
++	si->curmap = regs;
++	si->sdh = sdh;
 +
-+		/* Enable interrupts */
-+		MTC0(C0_STATUS, 0, MFC0(C0_STATUS, 0) | (ALLINTS | ST0_IE));
++	/* 4317A0 PCMCIA is no longer supported */ 
++	if ((bustype == PCMCIA_BUS) && (R_REG((uint32 *)regs) == 0x04104317))
++		return NULL;
 +
-+		/* Enable MIPS timer interrupt */
-+		if (!(mipsr = sb_setcore(sbh, SB_MIPS, 0)) &&
-+		    !(mipsr = sb_setcore(sbh, SB_MIPS33, 0)))
-+			ASSERT(mipsr);
-+		W_REG(&mipsr->intmask, 1);
++	/* check to see if we are a sb core mimic'ing a pci core */
++	if (bustype == PCI_BUS) {
++		if (OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof (uint32)) == 0xffffffff)
++			bustype = SB_BUS;
++		else
++			bustype = PCI_BUS;
++	}
 +
-+	start_fill:
-+		/* step 1, set clock ratios */
-+		MTC0(C0_BROADCOM, 3, new_ratio);
-+		MTC0(C0_BROADCOM, 1, 8);
++	si->bus = bustype;
 +
-+		/* step 2: program timer intr */
-+		W_REG(&mipsr->timer, 100);
-+		(void) R_REG(&mipsr->timer);
++	/* kludge to enable the clock on the 4306 which lacks a slowclock */
++	if (si->bus == PCI_BUS)
++		sb_pwrctl_xtal((void*)si, XTAL|PLL, ON);
 +
-+		/* step 3, switch to async */
-+		sync_mode = MFC0(C0_BROADCOM, 4);
-+		MTC0(C0_BROADCOM, 4, 1 << 22);
++	/* clear any previous epidiag-induced target abort */
++	sb_taclear((void*)si);
 +
-+		/* step 4, set cfg active */
-+		MTC0(C0_BROADCOM, 2, 0x9);
++	/* initialize current core index value */
++	si->curidx = _sb_coreidx((void*)si);
 +
++	/* keep and reuse the initial register mapping */
++	origidx = si->curidx;
++	if (si->bus == SB_BUS)
++		si->regs[origidx] = regs;
 +
-+		/* steps 5 & 6 */ 
-+		__asm__ __volatile__ (
-+			".set\tmips3\n\t"
-+			"wait\n\t"
-+			".set\tmips0"
-+		);
++	/* initialize the vars */
++	if (srom_var_init(si->bus, si->curmap, osh, vars, varsz)) {
++		SB_ERROR(("sb_attach: srom_var_init failed\n"));
++		goto bad;
++	}
++	
++	if (si->bus == PCMCIA_BUS) {
++		w = getintvar(*vars, "regwindowsz");
++		si->memseg = (w <= CFTABLE_REGWIN_2K) ? TRUE : FALSE;
++	}
 +
-+		/* step 7, clear cfg_active */
-+		MTC0(C0_BROADCOM, 2, 0);
-+		
-+		/* Additional Step: set back to orig sync mode */
-+		MTC0(C0_BROADCOM, 4, sync_mode);
++	/* is core-0 a chipcommon core? */
++	si->numcores = 1;
++	cc = (chipcregs_t*) sb_setcoreidx((void*)si, 0);
++	if (sb_coreid((void*)si) != SB_CC)
++		cc = NULL;
 +
-+		/* step 8, fake soft reset */
-+		MTC0(C0_BROADCOM, 5, MFC0(C0_BROADCOM, 5) | 4);
++	/* determine chip id and rev */
++	if (cc) {
++		/* chip common core found! */
++		si->chip = R_REG(&cc->chipid) & CID_ID_MASK;
++		si->chiprev = (R_REG(&cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT;
++		si->chippkg = (R_REG(&cc->chipid) & CID_PKG_MASK) >> CID_PKG_SHIFT;
++	} else {
++		/* without chip common core, get devid for PCMCIA */
++		if (si->bus == PCMCIA_BUS)
++			devid = getintvar(*vars, "devid");
 +
-+	end_fill:
-+		/* step 9 set watchdog timer */
-+		sb_watchdog(sbh, 20);
-+		(void) R_REG(&cc->chipid);
++		/* no chip common core -- must convert device id to chip id */
++		if ((si->chip = sb_pcidev2chip(devid)) == 0) {
++			SB_ERROR(("sb_attach: unrecognized device id 0x%04x\n", devid));
++			goto bad;
++		}
 +
-+		/* step 11 */
-+		__asm__ __volatile__ (
-+			".set\tmips3\n\t"
-+			"sync\n\t"
-+			"wait\n\t"
-+			".set\tmips0"
-+		);
-+		while (1);
++		/*
++		 * The chip revision number is hardwired into all
++		 * of the pci function config rev fields and is
++		 * independent from the individual core revision numbers.
++		 * For example, the "A0" silicon of each chip is chip rev 0.
++		 * For PCMCIA we get it from the CIS instead.
++		 */
++		if (si->bus == PCMCIA_BUS) {
++			ASSERT(vars);
++			si->chiprev = getintvar(*vars, "chiprev");
++		} else if (si->bus == PCI_BUS) {
++			w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_REV, sizeof (uint32));
++			si->chiprev = w & 0xff;
++		} else
++			si->chiprev = 0;
 +	}
 +
-+done:
-+	/* switch back to previous core */
-+	sb_setcoreidx(sbh, idx);
++	/* get chipcommon rev */
++	si->ccrev = cc? sb_corerev((void*)si) : 0;
++	
++	/* determine numcores */
++	if ((si->ccrev == 4) || (si->ccrev >= 6))
++		si->numcores = (R_REG(&cc->chipid) & CID_CC_MASK) >> CID_CC_SHIFT;
++	else
++		si->numcores = sb_chip2numcores(si->chip);
 +
-+	return ret;
-+}
++	/* return to original core */
++	sb_setcoreidx((void*)si, origidx);
 +
++	/* sanity checks */
++	ASSERT(si->chip);
++	/* 4704A1 is chiprev 8 :-( */
++	ASSERT((si->chiprev < 8) ||
++	       ((si->chip == BCM4704_DEVICE_ID) && ((si->chiprev == 8))));
 +
-+/* returns the ncdl value to be programmed into sdram_ncdl for calibration */
-+uint32
-+sb_memc_get_ncdl(void *sbh)
-+{
-+	sbmemcregs_t *memc;
-+	uint32 ret = 0;
-+	uint32 config, rd, wr, misc, dqsg, cd, sm, sd;
-+	uint idx, rev;
++	/* scan for cores */
++	sb_scan(si);
 +
-+	idx = sb_coreidx(sbh);
++	/* pci core is required */
++	if (!GOODIDX(si->pciidx)) {
++		SB_ERROR(("sb_attach: pci core not found\n"));
++		goto bad;
++	}
 +
-+	memc = (sbmemcregs_t *)sb_setcore(sbh, SB_MEMC, 0);
-+	if (memc == 0)
-+		goto out;
++	/* gpio control core is required */
++	if (!GOODIDX(si->gpioidx)) {
++		SB_ERROR(("sb_attach: gpio control core not found\n"));
++		goto bad;
++	}
 +
-+	rev = sb_corerev(sbh);
++	/* get boardtype and boardrev */
++	switch (si->bus) {
++	case PCI_BUS:
++		/* do a pci config read to get subsystem id and subvendor id */
++		w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_SVID, sizeof (uint32));
++		si->boardvendor = w & 0xffff;
++		si->boardtype = (w >> 16) & 0xffff;
++		break;
 +
-+	config = R_REG(&memc->config);
-+	wr = R_REG(&memc->wrncdlcor);
-+	rd = R_REG(&memc->rdncdlcor);
-+	misc = R_REG(&memc->miscdlyctl);
-+	dqsg = R_REG(&memc->dqsgatencdl);
++	case PCMCIA_BUS:
++	case SDIO_BUS:
++		si->boardvendor = getintvar(*vars, "manfid");
++		si->boardtype = getintvar(*vars, "prodid");
++		break;
 +
-+	rd &= MEMC_RDNCDLCOR_RD_MASK;
-+	wr &= MEMC_WRNCDLCOR_WR_MASK; 
-+	dqsg &= MEMC_DQSGATENCDL_G_MASK;
++	case SB_BUS:
++		si->boardvendor = VENDOR_BROADCOM;
++		si->boardtype = 0xffff;
++		break;
++	}
 +
-+	if (config & MEMC_CONFIG_DDR) {
-+		ret = (wr << 16) | (rd << 8) | dqsg;
-+	} else {
-+		if (rev > 0)
-+			cd = rd;
-+		else
-+			cd = (rd == MEMC_CD_THRESHOLD) ? rd : (wr + MEMC_CD_THRESHOLD);
-+		sm = (misc & MEMC_MISC_SM_MASK) >> MEMC_MISC_SM_SHIFT;
-+		sd = (misc & MEMC_MISC_SD_MASK) >> MEMC_MISC_SD_SHIFT;
-+		ret = (sm << 16) | (sd << 8) | cd;
++	if (si->boardtype == 0) {
++		SB_ERROR(("sb_attach: unknown board type\n"));
++		ASSERT(si->boardtype);
 +	}
 +
-+out:
-+	/* switch back to previous core */
-+	sb_setcoreidx(sbh, idx);
++	return ((void*)si);
 +
-+	return ret;
++bad:
++	MFREE(si, sizeof (sb_info_t));
++	return (NULL);
 +}
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbpci.c
---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbpci.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbpci.c	2005-08-28 11:12:20.479851704 +0200
-@@ -0,0 +1,530 @@
-+/*
-+ * Low-Level PCI and SB support for BCM47xx
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: sbpci.c,v 1.2 2005/02/28 13:34:25 jolt Exp $
-+ */
 +
-+#include <typedefs.h>
-+#include <pcicfg.h>
-+#include <bcmdevs.h>
-+#include <sbconfig.h>
-+#include <sbpci.h>
-+#include <osl.h>
-+#include <bcmendian.h>
-+#include <bcmutils.h>
-+#include <sbutils.h>
-+#include <bcmnvram.h>
-+#include <hndmips.h>
++uint
++sb_coreid(void *sbh)
++{
++	sb_info_t *si;
++	sbconfig_t *sb;
 +
-+/* Can free sbpci_init() memory after boot */
-+#ifndef linux
-+#define __init
-+#endif
++	si = SB_INFO(sbh);
++	sb = REGS2SB(si->curmap);
 +
-+/* Emulated configuration space */
-+static pci_config_regs sb_config_regs[SB_MAXCORES];
++	return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT);
++}
 +
-+/* Banned cores */
-+static uint16 pci_ban[32] = { 0 };
-+static uint pci_banned = 0;
++uint
++sb_coreidx(void *sbh)
++{
++	sb_info_t *si;
 +
-+/* CardBus mode */
-+static bool cardbus = FALSE;
++	si = SB_INFO(sbh);
++	return (si->curidx);
++}
 +
-+/*
-+ * Functions for accessing external PCI configuration space
-+ */
++/* return current index of core */
++static uint
++_sb_coreidx(void *sbh)
++{
++	sb_info_t *si;
++	sbconfig_t *sb;
++	uint32 sbaddr = 0;
 +
-+/* Assume one-hot slot wiring */
-+#define PCI_SLOT_MAX 16
++	si = SB_INFO(sbh);
++	ASSERT(si);
 +
-+static uint32
-+config_cmd(void *sbh, uint bus, uint dev, uint func, uint off)
-+{
-+	uint coreidx;
-+	sbpciregs_t *regs;
-+	uint32 addr = 0;
++	switch (si->bus) {
++	case SB_BUS:
++		sb = REGS2SB(si->curmap);
++		sbaddr = sb_base(R_SBREG(sbh, &sb->sbadmatch0));
++		break;
 +
-+	/* CardBusMode supports only one device */
-+	if (cardbus && dev > 1)
-+		return 0;
++	case PCI_BUS:
++		sbaddr = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof (uint32));
++		break;
 +
-+	coreidx = sb_coreidx(sbh);
-+	regs = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0);
++	case PCMCIA_BUS: {
++		uint8 tmp;
 +
-+	/* Type 0 transaction */
-+	if (bus == 1) {
-+		/* Skip unwired slots */
-+		if (dev < PCI_SLOT_MAX) {
-+			/* Slide the PCI window to the appropriate slot */
-+			W_REG(&regs->sbtopci1, SBTOPCI_CFG0 | ((1 << (dev + 16)) & SBTOPCI1_MASK));
-+			addr = SB_PCI_CFG | ((1 << (dev + 16)) & ~SBTOPCI1_MASK) |
-+				(func << 8) | (off & ~3);
-+		}
++		OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1);
++		sbaddr  = (uint)tmp << 12;
++		OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1);
++		sbaddr |= (uint)tmp << 16;
++		OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1);
++		sbaddr |= (uint)tmp << 24;
++		break;
 +	}
-+
-+	/* Type 1 transaction */
-+	else {
-+		W_REG(&regs->sbtopci1, SBTOPCI_CFG1);
-+		addr = SB_PCI_CFG | (bus << 16) | (dev << 11) | (func << 8) | (off & ~3);
++	default:
++		ASSERT(0);
 +	}
 +
-+	sb_setcoreidx(sbh, coreidx);
-+
-+	return addr;
++	ASSERT(GOODCOREADDR(sbaddr));
++	return ((sbaddr - SB_ENUM_BASE)/SB_CORE_SIZE);
 +}
 +
-+static int
-+extpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++uint
++sb_corevendor(void *sbh)
 +{
-+	uint32 addr, *reg = NULL, val;
-+	int ret = 0;
-+
-+	if (!(addr = config_cmd(sbh, bus, dev, func, off)) ||
-+	    !(reg = (uint32 *) REG_MAP(addr, len)) ||
-+	    BUSPROBE(val, reg))
-+		val = 0xffffffff;
-+
-+	val >>= 8 * (off & 3);
-+	if (len == 4)
-+		*((uint32 *) buf) = val;
-+	else if (len == 2)
-+		*((uint16 *) buf) = (uint16) val;
-+	else if (len == 1)
-+		*((uint8 *) buf) = (uint8) val;
-+	else
-+		ret = -1;
++	sb_info_t *si;
++	sbconfig_t *sb;
 +
-+	if (reg)
-+		REG_UNMAP(reg);
++	si = SB_INFO(sbh);
++	sb = REGS2SB(si->curmap);
 +
-+	return ret;
++	return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT);
 +}
 +
-+static int
-+extpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++uint
++sb_corerev(void *sbh)
 +{
-+	uint32 addr, *reg = NULL, val;
-+	int ret = 0;
-+
-+	if (!(addr = config_cmd(sbh, bus, dev, func, off)) ||
-+	    !(reg = (uint32 *) REG_MAP(addr, len)) ||
-+	    BUSPROBE(val, reg))
-+		goto done;
-+
-+	if (len == 4)
-+		val = *((uint32 *) buf);
-+	else if (len == 2) {
-+		val &= ~(0xffff << (8 * (off & 3)));
-+		val |= *((uint16 *) buf) << (8 * (off & 3));
-+	} else if (len == 1) {
-+		val &= ~(0xff << (8 * (off & 3)));
-+		val |= *((uint8 *) buf) << (8 * (off & 3));
-+	} else
-+		ret = -1;
-+
-+	W_REG(reg, val);
++	sb_info_t *si;
++	sbconfig_t *sb;
 +
-+ done:
-+	if (reg)
-+		REG_UNMAP(reg);
++	si = SB_INFO(sbh);
++	sb = REGS2SB(si->curmap);
 +
-+	return ret;
++	return (R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_RC_MASK);
 +}
 +
-+/*
-+ * Functions for accessing translated SB configuration space
-+ */
++#define	SBTML_ALLOW	(SBTML_PE | SBTML_FGC | SBTML_FL_MASK)
 +
-+static int
-+sb_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++/* set/clear sbtmstatelow core-specific flags */
++uint32
++sb_coreflags(void *sbh, uint32 mask, uint32 val)
 +{
-+	pci_config_regs *cfg;
++	sb_info_t *si;
++	sbconfig_t *sb;
++	uint32 w;
 +
-+	if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs))
-+		return -1;
-+	cfg = &sb_config_regs[dev];
++	si = SB_INFO(sbh);
++	sb = REGS2SB(si->curmap);
 +
-+	ASSERT(ISALIGNED(off, len));
-+	ASSERT(ISALIGNED(buf, len));
++	ASSERT((val & ~mask) == 0);
++	ASSERT((mask & ~SBTML_ALLOW) == 0);
 +
-+	if (len == 4)
-+		*((uint32 *) buf) = ltoh32(*((uint32 *)((ulong) cfg + off)));
-+	else if (len == 2)
-+		*((uint16 *) buf) = ltoh16(*((uint16 *)((ulong) cfg + off)));
-+	else if (len == 1)
-+		*((uint8 *) buf) = *((uint8 *)((ulong) cfg + off));
-+	else
-+		return -1;
++	/* mask and set */
++	if (mask || val) {
++		w = (R_SBREG(sbh, &sb->sbtmstatelow) & ~mask) | val;
++		W_SBREG(sbh, &sb->sbtmstatelow, w);
++	}
 +
-+	return 0;
++	/* return the new value */
++	return (R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_ALLOW);
 +}
 +
-+static int
-+sb_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++/* set/clear sbtmstatehigh core-specific flags */
++uint32
++sb_coreflagshi(void *sbh, uint32 mask, uint32 val)
 +{
-+	uint coreidx, n;
-+	void *regs;
++	sb_info_t *si;
 +	sbconfig_t *sb;
-+	pci_config_regs *cfg;
++	uint32 w;
 +
-+	if (dev >= SB_MAXCORES || (off + len) > sizeof(pci_config_regs))
-+		return -1;
-+	cfg = &sb_config_regs[dev];
++	si = SB_INFO(sbh);
++	sb = REGS2SB(si->curmap);
 +
-+	ASSERT(ISALIGNED(off, len));
-+	ASSERT(ISALIGNED(buf, len));
++	ASSERT((val & ~mask) == 0);
++	ASSERT((mask & ~SBTMH_FL_MASK) == 0);
 +
-+	/* Emulate BAR sizing */
-+	if (off >= OFFSETOF(pci_config_regs, base[0]) && off <= OFFSETOF(pci_config_regs, base[3]) &&
-+	    len == 4 && *((uint32 *) buf) == ~0) {
-+		coreidx = sb_coreidx(sbh);
-+		if ((regs = sb_setcoreidx(sbh, dev))) {
-+			sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
-+			/* Highest numbered address match register */
-+			n = (R_REG(&sb->sbidlow) & SBIDL_AR_MASK) >> SBIDL_AR_SHIFT;
-+			if (off == OFFSETOF(pci_config_regs, base[0]))
-+				cfg->base[0] = ~(sb_size(R_REG(&sb->sbadmatch0)) - 1);
-+			/*else if (off == OFFSETOF(pci_config_regs, base[1]) && n >= 1)
-+				cfg->base[1] = ~(sb_size(R_REG(&sb->sbadmatch1)) - 1);
-+			else if (off == OFFSETOF(pci_config_regs, base[2]) && n >= 2)
-+				cfg->base[2] = ~(sb_size(R_REG(&sb->sbadmatch2)) - 1);
-+			else if (off == OFFSETOF(pci_config_regs, base[3]) && n >= 3)
-+				cfg->base[3] = ~(sb_size(R_REG(&sb->sbadmatch3)) - 1);*/
-+		}
-+		sb_setcoreidx(sbh, coreidx);
-+		return 0;
++	/* mask and set */
++	if (mask || val) {
++		w = (R_SBREG(sbh, &sb->sbtmstatehigh) & ~mask) | val;
++		W_SBREG(sbh, &sb->sbtmstatehigh, w);
 +	}
 +
-+	if (len == 4)
-+		*((uint32 *)((ulong) cfg + off)) = htol32(*((uint32 *) buf));
-+	else if (len == 2)
-+		*((uint16 *)((ulong) cfg + off)) = htol16(*((uint16 *) buf));
-+	else if (len == 1)
-+		*((uint8 *)((ulong) cfg + off)) = *((uint8 *) buf);
-+	else
-+		return -1;
-+
-+	return 0;
++	/* return the new value */
++	return (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_FL_MASK);
 +}
 +
-+int
-+sbpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
++bool
++sb_iscoreup(void *sbh)
 +{
-+	if (bus == 0)
-+		return sb_read_config(sbh, bus, dev, func, off, buf, len);
-+	else
-+		return extpci_read_config(sbh, bus, dev, func, off, buf, len);
-+}
-+
-+int
-+sbpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len)
-+{
-+	if (bus == 0)
-+		return sb_write_config(sbh, bus, dev, func, off, buf, len);
-+	else
-+		return extpci_write_config(sbh, bus, dev, func, off, buf, len);
-+}
++	sb_info_t *si;
++	sbconfig_t *sb;
 +
-+void
-+sbpci_ban(uint16 core)
-+{
-+	if (pci_banned < ARRAYSIZE(pci_ban))
-+		pci_ban[pci_banned++] = core;
++	si = SB_INFO(sbh);
++	sb = REGS2SB(si->curmap);
++
++	return ((R_SBREG(sbh, &(sb)->sbtmstatelow) & (SBTML_RESET | SBTML_REJ | SBTML_CLK)) == SBTML_CLK);
 +}
 +
-+int __init
-+sbpci_init(void *sbh)
++/*
++ * Switch to 'coreidx', issue a single arbitrary 32bit register mask&set operation,
++ * switch back to the original core, and return the new value.
++ */
++static uint
++sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val)
 +{
-+	uint chip, chiprev, chippkg, coreidx, host, i;
-+	sbpciregs_t *pci;
-+	sbconfig_t *sb;
-+	pci_config_regs *cfg;
-+	void *regs;
-+	char varname[8];
-+	uint wlidx = 0;
-+	uint16 vendor, core;
-+	uint8 class, subclass, progif;
-+	uint32 val;
-+	uint32 sbips_int_mask[] = { 0, SBIPS_INT1_MASK, SBIPS_INT2_MASK, SBIPS_INT3_MASK, SBIPS_INT4_MASK };
-+	uint32 sbips_int_shift[] = { 0, 0, SBIPS_INT2_SHIFT, SBIPS_INT3_SHIFT, SBIPS_INT4_SHIFT };
-+
-+	chip = sb_chip(sbh);
-+	chiprev = sb_chiprev(sbh);
-+	chippkg = sb_chippkg(sbh);
-+	coreidx = sb_coreidx(sbh);
++	sb_info_t *si;
++	uint origidx;
++	uint32 *r;
++	uint w;
++	uint intr_val = 0;
 +
-+	if (!(pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0)))
-+		return -1;
-+	sb_core_reset(sbh, 0);
++	ASSERT(GOODIDX(coreidx));
++	ASSERT(regoff < SB_CORE_SIZE);
++	ASSERT((val & ~mask) == 0);
 +
-+	if (((chip == BCM4310_DEVICE_ID) && (chiprev == 0)) ||
-+	    ((chip == BCM4712_DEVICE_ID) && (chippkg == BCM4712SMALL_PKG_ID)))
-+		host = 0;
-+	else
-+		host = !BUSPROBE(val, &pci->control);
++	si = SB_INFO(sbh);
 +
-+	if (!host) {
-+		/* Disable PCI interrupts in client mode */
-+		sb = (sbconfig_t *)((ulong) pci + SBCONFIGOFF);
-+		W_REG(&sb->sbintvec, 0);
++	/* save current core index */
++	origidx = sb_coreidx(sbh);
 +
-+		/* Disable the PCI bridge in client mode */
-+		sbpci_ban(SB_PCI);
-+		printf("PCI: Disabled\n");
-+	} else {
-+		/* Reset the external PCI bus and enable the clock */
-+		W_REG(&pci->control, 0x5);		/* enable the tristate drivers */
-+		W_REG(&pci->control, 0xd);		/* enable the PCI clock */
-+		OSL_DELAY(100);				/* delay 100 us */
-+		W_REG(&pci->control, 0xf);		/* deassert PCI reset */
-+		W_REG(&pci->arbcontrol, PCI_INT_ARB);	/* use internal arbiter */
-+		OSL_DELAY(1);				/* delay 1 us */
++	/* switch core */
++	INTR_OFF(si, intr_val);
++	r = (uint32*) ((uint) sb_setcoreidx(sbh, coreidx) + regoff);
 +
-+		/* Enable CardBusMode */
-+		cardbus = nvram_match("cardbus", "1");
-+		if (cardbus) {
-+			printf("PCI: Enabling CardBus\n");
-+			/* GPIO 1 resets the CardBus device on bcm94710ap */
-+			sb_gpioout(sbh, 1, 1);
-+			sb_gpioouten(sbh, 1, 1);
-+			W_REG(&pci->sprom[0], R_REG(&pci->sprom[0]) | 0x400);
++	/* mask and set */
++	if (mask || val) {
++		if (regoff >= SBCONFIGOFF) {
++			w = (R_SBREG(sbh, r) & ~mask) | val;
++			W_SBREG(sbh, r, w);
++		} else {
++			w = (R_REG(r) & ~mask) | val;
++			W_REG(r, w);
 +		}
++	}
 +
-+		/* 64 MB I/O access window */
-+		W_REG(&pci->sbtopci0, SBTOPCI_IO);
-+		/* 64 MB configuration access window */
-+		W_REG(&pci->sbtopci1, SBTOPCI_CFG0);
-+		/* 1 GB memory access window */
-+		W_REG(&pci->sbtopci2, SBTOPCI_MEM | SB_PCI_DMA);
++	/* readback */
++	w = R_SBREG(sbh, r);
 +
-+		/* Enable PCI bridge BAR0 prefetch and burst */
-+		val = 6;
-+		sbpci_write_config(sbh, 1, 0, 0, PCI_CFG_CMD, &val, sizeof(val));
++	/* restore core index */
++	if (origidx != coreidx)
++		sb_setcoreidx(sbh, origidx);
 +
-+		/* Enable PCI interrupts */
-+		W_REG(&pci->intmask, PCI_INTA);
-+	}
++	INTR_RESTORE(si, intr_val);
++	return (w);
++}
 +
-+	/* Scan the SB bus */
-+	bzero(sb_config_regs, sizeof(sb_config_regs));
-+	for (cfg = sb_config_regs; cfg < &sb_config_regs[SB_MAXCORES]; cfg++) {
-+		cfg->vendor = 0xffff;
-+		if (!(regs = sb_setcoreidx(sbh, cfg - sb_config_regs)))
-+			continue;
-+		sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
++/* scan the sb enumerated space to identify all cores */
++static void
++sb_scan(sb_info_t *si)
++{
++	void *sbh;
++	uint origidx;
++	uint i;
 +
-+		/* Read ID register and parse vendor and core */
-+		val = R_REG(&sb->sbidhigh);
-+		vendor = (val & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT;
-+		core = (val & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT;
-+		progif = 0;
++	sbh = (void*) si;
 +
-+		/* Check if this core is banned */
-+		for (i = 0; i < pci_banned; i++)
-+			if (core == pci_ban[i])
-+				break;
-+		if (i < pci_banned)
-+			continue;
++	/* numcores should already be set */
++	ASSERT((si->numcores > 0) && (si->numcores <= SB_MAXCORES));
 +
-+		/* Known vendor translations */
-+		switch (vendor) {
-+		case SB_VEND_BCM:
-+			vendor = VENDOR_BROADCOM;
-+			break;
-+		}
++	/* save current core index */
++	origidx = sb_coreidx(sbh);
 +
-+		/* Determine class based on known core codes */
-+		switch (core) {
-+		case SB_ILINE20:
-+			class = PCI_CLASS_NET;
-+			subclass = PCI_NET_ETHER;
-+			core = BCM47XX_ILINE_ID;
-+			break;
-+		case SB_ILINE100:
-+			class = PCI_CLASS_NET;
-+			subclass = PCI_NET_ETHER;
-+			core = BCM4610_ILINE_ID;
-+			break;
-+		case SB_ENET:
-+			class = PCI_CLASS_NET;
-+			subclass = PCI_NET_ETHER;
-+			core = BCM47XX_ENET_ID;
-+			break;
-+		case SB_SDRAM:
-+		case SB_MEMC:
-+			class = PCI_CLASS_MEMORY;
-+			subclass = PCI_MEMORY_RAM;
-+			break;
-+		case SB_PCI:
-+			class = PCI_CLASS_BRIDGE;
-+			subclass = PCI_BRIDGE_PCI;
-+			//break;
-+		case SB_MIPS:
-+		case SB_MIPS33:
-+			class = PCI_CLASS_CPU;
-+			subclass = PCI_CPU_MIPS;
-+			break;
-+		case SB_CODEC:
-+			class = PCI_CLASS_COMM;
-+			subclass = PCI_COMM_MODEM;
-+			core = BCM47XX_V90_ID;
-+			break;
-+		case SB_USB:
-+			class = PCI_CLASS_SERIAL;
-+			subclass = PCI_SERIAL_USB;
-+			progif = 0x10; /* OHCI */
-+			core = BCM47XX_USB_ID;
-+			break;
-+		case SB_USB11H:
-+			class = PCI_CLASS_SERIAL;
-+			subclass = PCI_SERIAL_USB;
-+			progif = 0x10; /* OHCI */
-+			core = BCM47XX_USBH_ID;
-+			break;
-+		case SB_USB11D:
-+			class = PCI_CLASS_SERIAL;
-+			subclass = PCI_SERIAL_USB;
-+			core = BCM47XX_USBD_ID;
-+			break;
-+		case SB_IPSEC:
-+			class = PCI_CLASS_CRYPT;
-+			subclass = PCI_CRYPT_NETWORK;
-+			core = BCM47XX_IPSEC_ID;
-+			break;
-+		case SB_EXTIF:
-+		case SB_CC:
-+			class = PCI_CLASS_MEMORY;
-+			subclass = PCI_MEMORY_FLASH;
-+			break;
-+		case SB_D11:
-+			class = PCI_CLASS_NET;
-+			subclass = PCI_NET_OTHER;
-+			/* Let an nvram variable override this */
-+			sprintf(varname, "wl%did", wlidx);
-+			wlidx++;
-+			if ((core = getintvar(NULL, varname)) == 0) {
-+				if (chip == BCM4712_DEVICE_ID) {
-+					if (chippkg == BCM4712SMALL_PKG_ID)
-+						core = BCM4306_D11G_ID;
-+					else
-+						core = BCM4306_D11DUAL_ID;
-+				} else {
-+					/* 4310 */
-+					core = BCM4310_D11B_ID;
-+				}
-+			}
-+			break;
++	si->pciidx = si->gpioidx = BADIDX;
 +
-+		default:
-+			class = subclass = progif = 0xff;
-+			break;
++	for (i = 0; i < si->numcores; i++) {
++		sb_setcoreidx(sbh, i);
++		si->coreid[i] = sb_coreid(sbh);
++
++		if (si->coreid[i] == SB_CC)
++			si->ccrev = sb_corerev(sbh);
++
++		else if (si->coreid[i] == SB_PCI) {
++			si->pciidx = i;
++			si->pcirev = sb_corerev(sbh);
++
++		}else if (si->coreid[i] == SB_PCMCIA){
++			si->pcmciaidx = i;
++			si->pcmciarev = sb_corerev(sbh);
 +		}
++	}
 +
-+		/* Supported translations */
-+		cfg->vendor = htol16(vendor);
-+		cfg->device = htol16(core);
-+		cfg->rev_id = chiprev;
-+		cfg->prog_if = progif;
-+		cfg->sub_class = subclass;
-+		cfg->base_class = class;
-+		cfg->base[0] = htol32(sb_base(R_REG(&sb->sbadmatch0)));
-+		cfg->base[1] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch1)))*/;
-+		cfg->base[2] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch2)))*/;
-+		cfg->base[3] = 0/*htol32(sb_base(R_REG(&sb->sbadmatch3)))*/;
-+		cfg->base[4] = 0;
-+		cfg->base[5] = 0;
-+		if (class == PCI_CLASS_BRIDGE && subclass == PCI_BRIDGE_PCI)
-+			cfg->header_type = PCI_HEADER_BRIDGE;
-+		else
-+			cfg->header_type = PCI_HEADER_NORMAL;
-+		/* Save core interrupt flag */
-+		cfg->int_pin = R_REG(&sb->sbtpsflag) & SBTPS_NUM0_MASK;
-+		/* Default to MIPS shared interrupt 0 */
-+		cfg->int_line = 0;
-+		/* MIPS sbipsflag maps core interrupt flags to interrupts 1 through 4 */
-+		if ((regs = sb_setcore(sbh, SB_MIPS, 0)) ||
-+		    (regs = sb_setcore(sbh, SB_MIPS33, 0))) {
-+			sb = (sbconfig_t *)((ulong) regs + SBCONFIGOFF);
-+			val = R_REG(&sb->sbipsflag);
-+			for (cfg->int_line = 1; cfg->int_line <= 4; cfg->int_line++) {
-+				if (((val & sbips_int_mask[cfg->int_line]) >> sbips_int_shift[cfg->int_line]) == cfg->int_pin)
-+					break;
-+			}
-+			if (cfg->int_line > 4)
-+				cfg->int_line = 0;
-+		}
-+		/* Emulated core */
-+		*((uint32 *) &cfg->sprom_control) = 0xffffffff;
++	/*
++	 * Find the gpio "controlling core" type and index.
++	 * Precedence:
++	 * - if there's a chip common core - use that
++	 * - else if there's a pci core (rev >= 2) - use that
++	 * - else there had better be an extif core (4710 only)
++	 */
++	if (GOODIDX(sb_findcoreidx(sbh, SB_CC, 0))) {
++		si->gpioidx = sb_findcoreidx(sbh, SB_CC, 0);
++		si->gpioid = SB_CC;
++	} else if (GOODIDX(si->pciidx) && (si->pcirev >= 2)) {
++		si->gpioidx = si->pciidx;
++		si->gpioid = SB_PCI;
++	} else if (sb_findcoreidx(sbh, SB_EXTIF, 0)) {
++		si->gpioidx = sb_findcoreidx(sbh, SB_EXTIF, 0);
++		si->gpioid = SB_EXTIF;
 +	}
 +
-+	sb_setcoreidx(sbh, coreidx);
-+	return 0;
++	/* return to original core index */
++	sb_setcoreidx(sbh, origidx);
 +}
 +
++/* may be called with core in reset */
 +void
-+sbpci_check(void *sbh)
++sb_detach(void *sbh)
 +{
-+	uint coreidx;
-+	sbpciregs_t *pci;
-+	uint32 sbtopci1;
-+	uint32 buf[64], *ptr, i;
-+	ulong pa;
-+	volatile uint j;
-+
-+	coreidx = sb_coreidx(sbh);
-+	pci = (sbpciregs_t *) sb_setcore(sbh, SB_PCI, 0);
++	sb_info_t *si;
++	uint idx;
 +
-+	/* Clear the test array */
-+	pa = (ulong) DMA_MAP(NULL, buf, sizeof(buf), DMA_RX, NULL);
-+	ptr = (uint32 *) OSL_UNCACHED(&buf[0]);
-+	memset(ptr, 0, sizeof(buf));
++	si = SB_INFO(sbh);
 +
-+	/* Point PCI window 1 to memory */
-+	sbtopci1 = R_REG(&pci->sbtopci1);
-+	W_REG(&pci->sbtopci1, SBTOPCI_MEM | (pa & SBTOPCI1_MASK));
++	if (si == NULL)
++		return;
 +
-+	/* Fill the test array via PCI window 1 */
-+	ptr = (uint32 *) REG_MAP(SB_PCI_CFG + (pa & ~SBTOPCI1_MASK), sizeof(buf));
-+	for (i = 0; i < ARRAYSIZE(buf); i++) {
-+		for (j = 0; j < 2; j++);
-+		W_REG(&ptr[i], i);
-+	}
-+	REG_UNMAP(ptr);
++	if (si->bus == SB_BUS)
++		for (idx = 0; idx < SB_MAXCORES; idx++)
++			if (si->regs[idx]) {
++				REG_UNMAP(si->regs[idx]);
++				si->regs[idx] = NULL;
++			}
 +
-+	/* Restore PCI window 1 */
-+	W_REG(&pci->sbtopci1, sbtopci1);
++	MFREE(si, sizeof (sb_info_t));
++}
 +
-+	/* Check the test array */
-+	DMA_UNMAP(NULL, pa, sizeof(buf), DMA_RX, NULL);
-+	ptr = (uint32 *) OSL_UNCACHED(&buf[0]);
-+	for (i = 0; i < ARRAYSIZE(buf); i++) {
-+		if (ptr[i] != i)
-+			break;
-+	}
++/* use pci dev id to determine chip id for chips not having a chipcommon core */
++static uint
++sb_pcidev2chip(uint pcidev)
++{
++	if ((pcidev >= BCM4710_DEVICE_ID) && (pcidev <= BCM47XX_USB_ID))
++		return (BCM4710_DEVICE_ID);
++	if ((pcidev >= BCM4610_DEVICE_ID) && (pcidev <= BCM4610_USB_ID))
++		return (BCM4610_DEVICE_ID);
++	if ((pcidev >= BCM4402_DEVICE_ID) && (pcidev <= BCM4402_V90_ID))
++		return (BCM4402_DEVICE_ID);
++	if ((pcidev >= BCM4307_V90_ID) && (pcidev <= BCM4307_D11B_ID))
++		return (BCM4307_DEVICE_ID);
++	if (pcidev == BCM4301_DEVICE_ID)
++		return (BCM4301_DEVICE_ID);
 +
-+	/* Change the clock if the test fails */
-+	if (i < ARRAYSIZE(buf)) {
-+		uint32 req, cur;
++	return (0);
++}
 +
-+		cur = sb_clock(sbh);
-+		printf("PCI: Test failed at %d MHz\n", (cur + 500000) / 1000000);
-+		for (req = 104000000; req < 176000000; req += 4000000) {
-+			printf("PCI: Resetting to %d MHz\n", (req + 500000) / 1000000);
-+			/* This will only reset if the clocks are valid and have changed */
-+			sb_mips_setclock(sbh, req, 0, 0);
-+		}
-+		/* Should not reach here */
-+		ASSERT(0);
-+	}
++/* convert chip number to number of i/o cores */
++static uint
++sb_chip2numcores(uint chip)
++{
++	if (chip == 0x4710)
++		return (9);
++	if (chip == 0x4610)
++		return (9);
++	if (chip == 0x4402)
++		return (3);
++	if ((chip == 0x4307) || (chip == 0x4301))
++		return (5);
++	if (chip == 0x4310)
++		return (8);
++	if (chip == 0x4306)	/* < 4306c0 */
++		return (6);
++	if (chip == 0x4704)
++		return (9);
++	if (chip == 0x5365)
++		return (7);
 +
-+	sb_setcoreidx(sbh, coreidx);
++	SB_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n", chip));
++	ASSERT(0);
++	return (1);
 +}
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbutils.c
---- linux-2.6.12.5/arch/mips/bcm947xx/broadcom/sbutils.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/broadcom/sbutils.c	2005-08-28 11:12:20.482851248 +0200
-@@ -0,0 +1,1895 @@
-+/*
-+ * Misc utility routines for accessing chip-specific features
-+ * of the SiliconBackplane-based Broadcom chips.
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id: sbutils.c,v 1.1 2005/02/28 13:33:32 jolt Exp $
-+ */
-+
-+#include <typedefs.h>
-+#include <osl.h>
-+#include <bcmutils.h>
-+#include <bcmdevs.h>
-+#include <sbconfig.h>
-+#include <sbchipc.h>
-+#include <sbpci.h>
-+#include <pcicfg.h>
-+#include <sbpcmcia.h>
-+#include <sbextif.h>
-+#include <sbutils.h>
-+#include <bcmsrom.h>
 +
-+/* debug/trace */
-+#define	SB_ERROR(args)
++/* return index of coreid or BADIDX if not found */
++static uint
++sb_findcoreidx(void *sbh, uint coreid, uint coreunit)
++{
++	sb_info_t *si;
++	uint found;
++	uint i;
 +
-+typedef uint32 (*sb_intrsoff_t)(void *intr_arg);
-+typedef void (*sb_intrsrestore_t)(void *intr_arg, uint32 arg);
++	si = SB_INFO(sbh);
++	found = 0;
 +
-+/* misc sb info needed by some of the routines */
-+typedef struct sb_info {
-+	uint	chip;			/* chip number */
-+	uint	chiprev;		/* chip revision */
-+	uint	chippkg;		/* chip package option */
-+	uint	boardtype;		/* board type */
-+	uint	boardvendor;		/* board vendor id */
-+	uint	bus;			/* what bus type we are going through */
++	for (i = 0; i < si->numcores; i++)
++		if (si->coreid[i] == coreid) {
++			if (found == coreunit)
++				return (i);
++			found++;
++		}
 +
-+	void	*osh;			/* osl os handle */
-+	void	*sdh;			/* bcmsdh handle */
++	return (BADIDX);
++}
 +
-+	void	*curmap;		/* current regs va */
-+	void	*regs[SB_MAXCORES];	/* other regs va */
++/* change logical "focus" to the indiciated core */
++void*
++sb_setcoreidx(void *sbh, uint coreidx)
++{
++	sb_info_t *si;
++	uint32 sbaddr;
++	uint8 tmp;
 +
-+	uint	curidx;			/* current core index */
-+	uint	dev_coreid;		/* the core provides driver functions */
-+	uint	pciidx;			/* pci core index */
-+	uint	pcirev;			/* pci core rev */
++	si = SB_INFO(sbh);
 +
-+	uint	pcmciaidx;		/* pcmcia core index */
-+	uint	pcmciarev;		/* pcmcia core rev */
-+	bool	memseg;			/* flag to toggle MEM_SEG register */
++	if (coreidx >= si->numcores)
++		return (NULL);
 +
-+	uint	ccrev;			/* chipc core rev */
++	/*
++	 * If the user has provided an interrupt mask enabled function,
++	 * then assert interrupts are disabled before switching the core.
++	 */
++	ASSERT((si->imf == NULL) || !(*si->imf)(si->imfarg));
 +
-+	uint	gpioidx;		/* gpio control core index */
-+	uint	gpioid;			/* gpio control coretype */
++	sbaddr = SB_ENUM_BASE + (coreidx * SB_CORE_SIZE);
 +
-+	uint	numcores;		/* # discovered cores */
-+	uint	coreid[SB_MAXCORES];	/* id of each core */
++	switch (si->bus) {
++	case SB_BUS:
++		/* map new one */
++		if (!si->regs[coreidx]) {
++			si->regs[coreidx] = (void*)REG_MAP(sbaddr, SB_CORE_SIZE);
++			ASSERT(GOODREGS(si->regs[coreidx]));
++		}
++		si->curmap = si->regs[coreidx];
++		break;
 +
-+	void	*intr_arg;		/* interrupt callback function arg */
-+	sb_intrsoff_t		intrsoff_fn;		/* function turns chip interrupts off */
-+	sb_intrsrestore_t	intrsrestore_fn;	/* function restore chip interrupts */
-+} sb_info_t;
++	case PCI_BUS:
++		/* point bar0 window */
++		OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, 4, sbaddr);
++		break;
 +
-+/* local prototypes */
-+static void* sb_doattach(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz);
-+static void sb_scan(sb_info_t *si);
-+static uint sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val);
-+static uint _sb_coreidx(void *sbh);
-+static uint sb_findcoreidx(void *sbh, uint coreid, uint coreunit);
-+static uint sb_pcidev2chip(uint pcidev);
-+static uint sb_chip2numcores(uint chip);
++	case PCMCIA_BUS:
++		tmp = (sbaddr >> 12) & 0x0f;
++		OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1);
++		tmp = (sbaddr >> 16) & 0xff;
++		OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1);
++		tmp = (sbaddr >> 24) & 0xff;
++		OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1);
++		break;
++	}
 +
-+#define	SB_INFO(sbh)	(sb_info_t*)sbh
-+#define	SET_SBREG(sbh, r, mask, val)	W_SBREG((sbh), (r), ((R_SBREG((sbh), (r)) & ~(mask)) | (val)))
-+#define	GOODCOREADDR(x)	(((x) >= SB_ENUM_BASE) && ((x) <= SB_ENUM_LIM) \
-+				&& ISALIGNED((x), SB_CORE_SIZE))
-+#define	GOODREGS(regs)	(regs && ISALIGNED(regs, SB_CORE_SIZE))
-+#define	REGS2SB(va)	(sbconfig_t*) ((uint)(va) + SBCONFIGOFF)
-+#define	GOODIDX(idx)	(((uint)idx) < SB_MAXCORES)
-+#define	BADIDX		(SB_MAXCORES+1)
++	si->curidx = coreidx;
 +
-+#define	R_SBREG(sbh, sbr)	sb_read_sbreg((sbh), (sbr))
-+#define	W_SBREG(sbh, sbr, v)	sb_write_sbreg((sbh), (sbr), (v))
-+#define	AND_SBREG(sbh, sbr, v)	W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) & (v)))
-+#define	OR_SBREG(sbh, sbr, v)	W_SBREG((sbh), (sbr), (R_SBREG((sbh), (sbr)) | (v)))
++	return (si->curmap);
++}
 +
-+/* 
-+ * Macros to disable/restore function core(D11, ENET, ILINE20, etc) interrupts before/
-+ * after core switching to avoid invalid register accesss inside ISR.
-+ */
-+#define INTR_OFF(si, intr_val) \
-+	if ((si)->intrsoff_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) {	\
-+		intr_val = (*(si)->intrsoff_fn)((si)->intr_arg); }
-+#define INTR_RESTORE(si, intr_val) \
-+	if ((si)->intrsrestore_fn && (si)->coreid[(si)->curidx] == (si)->dev_coreid) {	\
-+		(*(si)->intrsrestore_fn)((si)->intr_arg, intr_val); }
++/* change logical "focus" to the indicated core */
++void*
++sb_setcore(void *sbh, uint coreid, uint coreunit)
++{
++	sb_info_t *si;
++	uint idx;
 +
-+/* power control defines */
-+#define	PLL_DELAY	150			/* 150us pll on delay */
-+#define	FREF_DELAY	15			/* 15us fref change delay */
-+#define	LPOMINFREQ	25000			/* low power oscillator min */
-+#define	LPOMAXFREQ	43000			/* low power oscillator max */
-+#define	XTALMINFREQ	19800000		/* 20mhz - 1% */
-+#define	XTALMAXFREQ	20200000		/* 20mhz + 1% */
-+#define	PCIMINFREQ	25000000		/* 25mhz */
-+#define	PCIMAXFREQ	34000000		/* 33mhz + fudge */
++	si = SB_INFO(sbh);
 +
-+#define SCC_LOW2FAST_LIMIT	5000	/* turn on fast clock time, in unit of ms */
++	idx = sb_findcoreidx(sbh, coreid, coreunit);
++	if (!GOODIDX(idx))
++		return (NULL);
 +
++	return (sb_setcoreidx(sbh, idx));
++}
 +
-+static uint32
-+sb_read_sbreg(void *sbh, volatile uint32 *sbr)
++/* return chip number */
++uint
++sb_chip(void *sbh)
 +{
 +	sb_info_t *si;
-+	uint8 tmp;
-+	uint32 val, intr_val = 0;
 +
 +	si = SB_INFO(sbh);
-+
-+	/* 
-+	 * compact flash only has 11 bits address, while we needs 12 bits address.
-+	 * MEM_SEG will be OR'd with other 11 bits address in hardware, 
-+	 * so we program MEM_SEG with 12th bit when necessary(access sb regsiters).
-+	 * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special
-+	 */
-+	if(si->memseg) {
-+		INTR_OFF(si, intr_val);
-+		tmp = 1;
-+		OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
-+		(uint32)sbr &= ~(1 << 11);	/* mask out bit 11*/
-+	}
-+
-+	val = R_REG(sbr);
-+	
-+	if(si->memseg) {
-+		tmp = 0;
-+		OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
-+		INTR_RESTORE(si, intr_val);
-+	}
-+
-+	return (val);
++	return (si->chip);
 +}
 +
-+static void
-+sb_write_sbreg(void *sbh, volatile uint32 *sbr, uint32 v)
++/* return chip revision number */
++uint
++sb_chiprev(void *sbh)
 +{
 +	sb_info_t *si;
-+	uint8 tmp;
-+	volatile uint32 dummy;
-+	uint32 intr_val = 0;
 +
 +	si = SB_INFO(sbh);
++	return (si->chiprev);
++}
 +
-+	/* 
-+	 * compact flash only has 11 bits address, while we needs 12 bits address.
-+	 * MEM_SEG will be OR'd with other 11 bits address in hardware, 
-+	 * so we program MEM_SEG with 12th bit when necessary(access sb regsiters).
-+	 * For normal PCMCIA bus(CFTable_regwinsz > 2k), do nothing special 
-+	 */
-+	if(si->memseg) {
-+		INTR_OFF(si, intr_val);
-+		tmp = 1;
-+		OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
-+		(uint32)sbr &= ~(1 << 11);	/* mask out bit 11 */
-+	}
-+
-+	if ((si->bus == PCMCIA_BUS) || (si->bus == PCI_BUS)) {
-+#ifdef IL_BIGENDIAN
-+		dummy = R_REG(sbr);
-+		W_REG((volatile uint16 *)((uint32)sbr + 2), (uint16)((v >> 16) & 0xffff));
-+		dummy = R_REG(sbr);
-+		W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff));
-+#else
-+		dummy = R_REG(sbr);
-+		W_REG((volatile uint16 *)sbr, (uint16)(v & 0xffff));
-+		dummy = R_REG(sbr);
-+		W_REG((volatile uint16 *)((uint32)sbr + 2), (uint16)((v >> 16) & 0xffff));
-+#endif
-+	} else
-+		W_REG(sbr, v);
++/* return chip package option */
++uint
++sb_chippkg(void *sbh)
++{
++	sb_info_t *si;
 +
-+	if(si->memseg) {
-+		tmp = 0;
-+		OSL_PCMCIA_WRITE_ATTR(si->osh, MEM_SEG, &tmp, 1);
-+		INTR_RESTORE(si, intr_val);
-+	}
++	si = SB_INFO(sbh);
++	return (si->chippkg);
 +}
 +
-+/*
-+ * Allocate a sb handle.
-+ * devid - pci device id (used to determine chip#)
-+ * osh - opaque OS handle
-+ * regs - virtual address of initial core registers
-+ * bustype - pci/pcmcia/sb/sdio/etc
-+ * vars - pointer to a pointer area for "environment" variables
-+ * varsz - pointer to int to return the size of the vars
-+ */
-+void*
-+sb_attach(uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz)
++/* return board vendor id */
++uint
++sb_boardvendor(void *sbh)
 +{
 +	sb_info_t *si;
 +
-+	/* alloc sb_info_t */
-+	if ((si = MALLOC(sizeof (sb_info_t))) == NULL) {
-+		SB_ERROR(("sb_attach: malloc failed!\n"));
-+		return (NULL);
-+	}
-+
-+	return (sb_doattach(si, devid, osh, regs, bustype, sdh, vars, varsz));
++	si = SB_INFO(sbh);
++	return (si->boardvendor);
 +}
 +
-+/* global kernel resource */
-+static sb_info_t ksi;
-+
-+/* generic kernel variant of sb_attach() */
-+void*
-+sb_kattach()
++/* return boardtype */
++uint
++sb_boardtype(void *sbh)
 +{
-+	uint32 *regs;
-+	char *unused;
-+	int varsz;
++	sb_info_t *si;
++	char *var;
 +
-+	if (ksi.curmap == NULL) {
-+		uint32 cid;
-+		regs = (uint32 *)REG_MAP(SB_ENUM_BASE, SB_CORE_SIZE);
-+		cid = R_REG((uint32 *)regs);
-+		if ((cid == 0x08104712) || (cid == 0x08114712)) {
-+			uint32 *scc, val;
++	si = SB_INFO(sbh);
 +
-+			scc = (uint32 *)((uint32)regs + OFFSETOF(chipcregs_t, slow_clk_ctl));
-+			val = R_REG(scc);
-+			SB_ERROR(("    initial scc = 0x%x\n", val));
-+			val |= SCC_SS_XTAL;
-+			W_REG(scc, val);
-+		}
++	if (si->bus == SB_BUS && si->boardtype == 0xffff) {
++		/* boardtype format is a hex string */
++		si->boardtype = getintvar(NULL, "boardtype");
 +
-+		sb_doattach(&ksi, BCM4710_DEVICE_ID, NULL, (void*)regs,
-+			    SB_BUS, NULL, &unused, &varsz);
++		/* backward compatibility for older boardtype string format */
++		if ((si->boardtype == 0) && (var = getvar(NULL, "boardtype"))) {
++			if (!strcmp(var, "bcm94710dev"))
++				si->boardtype = BCM94710D_BOARD;
++			else if (!strcmp(var, "bcm94710ap"))
++				si->boardtype = BCM94710AP_BOARD;
++			else if (!strcmp(var, "bcm94310u"))
++				si->boardtype = BCM94310U_BOARD;
++			else if (!strcmp(var, "bu4711"))
++				si->boardtype = BU4711_BOARD;
++			else if (!strcmp(var, "bu4710"))
++				si->boardtype = BU4710_BOARD;
++			else if (!strcmp(var, "bcm94702mn"))
++				si->boardtype = BCM94702MN_BOARD;
++			else if (!strcmp(var, "bcm94710r1"))
++				si->boardtype = BCM94710R1_BOARD;
++			else if (!strcmp(var, "bcm94710r4"))
++				si->boardtype = BCM94710R4_BOARD;
++			else if (!strcmp(var, "bcm94702cpci"))
++    				si->boardtype = BCM94702CPCI_BOARD;
++			else if (!strcmp(var, "bcm95380_rr"))
++    				si->boardtype = BCM95380RR_BOARD; 
++		}
 +	}
 +
-+	return &ksi;
++	return (si->boardtype);
 +}
 +
-+static void*
-+sb_doattach(sb_info_t *si, uint devid, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz)
++/* return board bus style */
++uint
++sb_boardstyle(void *sbh)
 +{
-+	uint origidx;
-+	chipcregs_t *cc;
-+	uint32 w;
-+
-+	ASSERT(GOODREGS(regs));
++	sb_info_t *si;
++	uint16 w;
 +
-+	bzero((uchar*)si, sizeof (sb_info_t));
++	si = SB_INFO(sbh);
 +
-+	si->pciidx = si->gpioidx = BADIDX;
++	if (si->bus == PCMCIA_BUS)
++		return (BOARDSTYLE_PCMCIA);
 +
-+	si->osh = osh;
-+	si->curmap = regs;
-+	si->sdh = sdh;
++	if (si->bus == SB_BUS)
++		return (BOARDSTYLE_SOC);
 +
-+	/* 4317A0 PCMCIA is no longer supported */ 
-+	if ((bustype == PCMCIA_BUS) && (R_REG((uint32 *)regs) == 0x04104317))
-+		return NULL;
++	/* bus is PCI */
 +
-+	/* check to see if we are a sb core mimic'ing a pci core */
-+	if (bustype == PCI_BUS) {
-+		if (OSL_PCI_READ_CONFIG(osh, PCI_SPROM_CONTROL, sizeof (uint32)) == 0xffffffff)
-+			bustype = SB_BUS;
-+		else
-+			bustype = PCI_BUS;
-+	}
-+
-+	si->bus = bustype;
-+
-+	/* kludge to enable the clock on the 4306 which lacks a slowclock */
-+	if (si->bus == PCI_BUS)
-+		sb_pwrctl_xtal((void*)si, XTAL|PLL, ON);
-+
-+	/* clear any previous epidiag-induced target abort */
-+	sb_taclear((void*)si);
-+
-+	/* initialize current core index value */
-+	si->curidx = _sb_coreidx((void*)si);
-+
-+	/* keep and reuse the initial register mapping */
-+	origidx = si->curidx;
-+	if (si->bus == SB_BUS)
-+		si->regs[origidx] = regs;
-+
-+	/* initialize the vars */
-+	if (srom_var_init(si->bus, si->curmap, osh, vars, varsz)) {
-+		SB_ERROR(("sb_attach: srom_var_init failed\n"));
-+		goto bad;
-+	}
-+	
-+	if (si->bus == PCMCIA_BUS) {
-+		w = getintvar(*vars, "regwindowsz");
-+		si->memseg = (w <= CFTABLE_REGWIN_2K) ? TRUE : FALSE;
-+	}
-+
-+	/* is core-0 a chipcommon core? */
-+	si->numcores = 1;
-+	cc = (chipcregs_t*) sb_setcoreidx((void*)si, 0);
-+	if (sb_coreid((void*)si) != SB_CC)
-+		cc = NULL;
-+
-+	/* determine chip id and rev */
-+	if (cc) {
-+		/* chip common core found! */
-+		si->chip = R_REG(&cc->chipid) & CID_ID_MASK;
-+		si->chiprev = (R_REG(&cc->chipid) & CID_REV_MASK) >> CID_REV_SHIFT;
-+		si->chippkg = (R_REG(&cc->chipid) & CID_PKG_MASK) >> CID_PKG_SHIFT;
-+	} else {
-+		/* without chip common core, get devid for PCMCIA */
-+		if (si->bus == PCMCIA_BUS)
-+			devid = getintvar(*vars, "devid");
-+
-+		/* no chip common core -- must convert device id to chip id */
-+		if ((si->chip = sb_pcidev2chip(devid)) == 0) {
-+			SB_ERROR(("sb_attach: unrecognized device id 0x%04x\n", devid));
-+			goto bad;
-+		}
-+
-+		/*
-+		 * The chip revision number is hardwired into all
-+		 * of the pci function config rev fields and is
-+		 * independent from the individual core revision numbers.
-+		 * For example, the "A0" silicon of each chip is chip rev 0.
-+		 * For PCMCIA we get it from the CIS instead.
-+		 */
-+		if (si->bus == PCMCIA_BUS) {
-+			ASSERT(vars);
-+			si->chiprev = getintvar(*vars, "chiprev");
-+		} else if (si->bus == PCI_BUS) {
-+			w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_REV, sizeof (uint32));
-+			si->chiprev = w & 0xff;
-+		} else
-+			si->chiprev = 0;
-+	}
-+
-+	/* get chipcommon rev */
-+	si->ccrev = cc? sb_corerev((void*)si) : 0;
-+	
-+	/* determine numcores */
-+	if ((si->ccrev == 4) || (si->ccrev >= 6))
-+		si->numcores = (R_REG(&cc->chipid) & CID_CC_MASK) >> CID_CC_SHIFT;
-+	else
-+		si->numcores = sb_chip2numcores(si->chip);
-+
-+	/* return to original core */
-+	sb_setcoreidx((void*)si, origidx);
-+
-+	/* sanity checks */
-+	ASSERT(si->chip);
-+	/* 4704A1 is chiprev 8 :-( */
-+	ASSERT((si->chiprev < 8) ||
-+	       ((si->chip == BCM4704_DEVICE_ID) && ((si->chiprev == 8))));
-+
-+	/* scan for cores */
-+	sb_scan(si);
-+
-+	/* pci core is required */
-+	if (!GOODIDX(si->pciidx)) {
-+		SB_ERROR(("sb_attach: pci core not found\n"));
-+		goto bad;
-+	}
-+
-+	/* gpio control core is required */
-+	if (!GOODIDX(si->gpioidx)) {
-+		SB_ERROR(("sb_attach: gpio control core not found\n"));
-+		goto bad;
-+	}
-+
-+	/* get boardtype and boardrev */
-+	switch (si->bus) {
-+	case PCI_BUS:
-+		/* do a pci config read to get subsystem id and subvendor id */
-+		w = OSL_PCI_READ_CONFIG(osh, PCI_CFG_SVID, sizeof (uint32));
-+		si->boardvendor = w & 0xffff;
-+		si->boardtype = (w >> 16) & 0xffff;
-+		break;
-+
-+	case PCMCIA_BUS:
-+	case SDIO_BUS:
-+		si->boardvendor = getintvar(*vars, "manfid");
-+		si->boardtype = getintvar(*vars, "prodid");
-+		break;
++	if (OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_CIS, sizeof (uint32)) != 0)
++		return (BOARDSTYLE_CARDBUS);
 +
-+	case SB_BUS:
-+		si->boardvendor = VENDOR_BROADCOM;
-+		si->boardtype = 0xffff;
-+		break;
-+	}
++	if ((srom_read(si->bus, si->curmap, si->osh, (SPROM_SIZE - 1) * 2, 2, &w) == 0) &&
++	    (w == 0x0313))
++		return (BOARDSTYLE_CARDBUS);
 +
-+	if (si->boardtype == 0) {
-+		SB_ERROR(("sb_attach: unknown board type\n"));
-+		ASSERT(si->boardtype);
-+	}
++	return (BOARDSTYLE_PCI);
++}
 +
-+	return ((void*)si);
++/* return boolean if sbh device is in pci hostmode or client mode */
++uint
++sb_bus(void *sbh)
++{
++	sb_info_t *si;
 +
-+bad:
-+	MFREE(si, sizeof (sb_info_t));
-+	return (NULL);
++	si = SB_INFO(sbh);
++	return (si->bus);
 +}
 +
++/* return list of found cores */
 +uint
-+sb_coreid(void *sbh)
++sb_corelist(void *sbh, uint coreid[])
 +{
 +	sb_info_t *si;
-+	sbconfig_t *sb;
 +
 +	si = SB_INFO(sbh);
-+	sb = REGS2SB(si->curmap);
 +
-+	return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_CC_MASK) >> SBIDH_CC_SHIFT);
++	bcopy((uchar*)si->coreid, (uchar*)coreid, (si->numcores * sizeof (uint)));
++	return (si->numcores);
 +}
 +
-+uint
-+sb_coreidx(void *sbh)
++/* return current register mapping */
++void *
++sb_coreregs(void *sbh)
 +{
 +	sb_info_t *si;
 +
 +	si = SB_INFO(sbh);
-+	return (si->curidx);
++	ASSERT(GOODREGS(si->curmap));
++
++	return (si->curmap);
 +}
 +
-+/* return current index of core */
-+static uint
-+_sb_coreidx(void *sbh)
++/* Check if a target abort has happened and clear it */
++bool
++sb_taclear(void *sbh)
 +{
 +	sb_info_t *si;
++	bool rc = FALSE;
 +	sbconfig_t *sb;
-+	uint32 sbaddr = 0;
 +
 +	si = SB_INFO(sbh);
-+	ASSERT(si);
-+
-+	switch (si->bus) {
-+	case SB_BUS:
-+		sb = REGS2SB(si->curmap);
-+		sbaddr = sb_base(R_SBREG(sbh, &sb->sbadmatch0));
-+		break;
++	sb = REGS2SB(si->curmap);
 +
-+	case PCI_BUS:
-+		sbaddr = OSL_PCI_READ_CONFIG(si->osh, PCI_BAR0_WIN, sizeof (uint32));
-+		break;
++	if (si->bus == PCI_BUS) {
++		uint32 stcmd;
 +
-+	case PCMCIA_BUS: {
-+		uint8 tmp;
++		stcmd = OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_CMD, sizeof(stcmd));
++		rc = (stcmd & 0x08000000) != 0;
 +
-+		OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1);
-+		sbaddr  = (uint)tmp << 12;
-+		OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1);
-+		sbaddr |= (uint)tmp << 16;
-+		OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1);
-+		sbaddr |= (uint)tmp << 24;
-+		break;
++		if (rc) {
++			/* Target abort bit is set, clear it */
++			OSL_PCI_WRITE_CONFIG(si->osh, PCI_CFG_CMD, sizeof(stcmd), stcmd);
++		}
++	} else if (si->bus == PCMCIA_BUS) {
++		rc = FALSE;
 +	}
-+	default:
-+		ASSERT(0);
++	else if (si->bus == SDIO_BUS) {
++		/* due to 4317 A0 HW bug, sdio core wedged on target abort, 
++		   just clear SBSErr bit blindly */
++		if (0x0 != R_SBREG(sbh, &sb->sbtmerrlog)) {
++			SB_ERROR(("SDIO target abort, clean it"));
++			W_SBREG(sbh, &sb->sbtmstatehigh, 0);
++		}
++		rc = FALSE;
 +	}
 +
-+	ASSERT(GOODCOREADDR(sbaddr));
-+	return ((sbaddr - SB_ENUM_BASE)/SB_CORE_SIZE);
++	return (rc);
 +}
 +
-+uint
-+sb_corevendor(void *sbh)
++/* do buffered registers update */
++void
++sb_commit(void *sbh)
 +{
 +	sb_info_t *si;
-+	sbconfig_t *sb;
++	sbpciregs_t *pciregs;
++	uint origidx;
++	uint intr_val = 0;
 +
 +	si = SB_INFO(sbh);
-+	sb = REGS2SB(si->curmap);
 +
-+	return ((R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_VC_MASK) >> SBIDH_VC_SHIFT);
++	origidx = si->curidx;
++	ASSERT(GOODIDX(origidx));
++
++	INTR_OFF(si, intr_val);
++	/* switch over to pci core */
++	pciregs = (sbpciregs_t*) sb_setcore(sbh, SB_PCI, 0);
++
++	/* do the buffer registers update */
++	W_REG(&pciregs->bcastaddr, SB_COMMIT);
++	W_REG(&pciregs->bcastdata, 0x0);
++
++	/* restore core index */
++	sb_setcoreidx(sbh, origidx);
++	INTR_RESTORE(si, intr_val);
 +}
 +
-+uint
-+sb_corerev(void *sbh)
++/* reset and re-enable a core */
++void
++sb_core_reset(void *sbh, uint32 bits)
 +{
 +	sb_info_t *si;
 +	sbconfig_t *sb;
++	volatile uint32 dummy;
 +
 +	si = SB_INFO(sbh);
++	ASSERT(GOODREGS(si->curmap));
 +	sb = REGS2SB(si->curmap);
 +
-+	return (R_SBREG(sbh, &(sb)->sbidhigh) & SBIDH_RC_MASK);
-+}
++	/*
++	 * Must do the disable sequence first to work for arbitrary current core state.
++	 */
++	sb_core_disable(sbh, bits);
 +
-+#define	SBTML_ALLOW	(SBTML_PE | SBTML_FGC | SBTML_FL_MASK)
-+
-+/* set/clear sbtmstatelow core-specific flags */
-+uint32
-+sb_coreflags(void *sbh, uint32 mask, uint32 val)
-+{
-+	sb_info_t *si;
-+	sbconfig_t *sb;
-+	uint32 w;
++	/*
++	 * Now do the initialization sequence.
++	 */
 +
-+	si = SB_INFO(sbh);
-+	sb = REGS2SB(si->curmap);
++	/* set reset while enabling the clock and forcing them on throughout the core */
++	W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | SBTML_RESET | bits));
++	dummy = R_SBREG(sbh, &sb->sbtmstatelow);
 +
-+	ASSERT((val & ~mask) == 0);
-+	ASSERT((mask & ~SBTML_ALLOW) == 0);
++	if (sb_coreid(sbh) == SB_ILINE100) {
++		bcm_mdelay(50);
++	} else {
++		OSL_DELAY(1);
++	}
 +
-+	/* mask and set */
-+	if (mask || val) {
-+		w = (R_SBREG(sbh, &sb->sbtmstatelow) & ~mask) | val;
-+		W_SBREG(sbh, &sb->sbtmstatelow, w);
++	if (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_SERR) {
++		W_SBREG(sbh, &sb->sbtmstatehigh, 0);
++	}
++	if ((dummy = R_SBREG(sbh, &sb->sbimstate)) & (SBIM_IBE | SBIM_TO)) {
++		AND_SBREG(sbh, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO));
 +	}
 +
-+	/* return the new value */
-+	return (R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_ALLOW);
++	/* clear reset and allow it to propagate throughout the core */
++	W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | bits));
++	dummy = R_SBREG(sbh, &sb->sbtmstatelow);
++	OSL_DELAY(1);
++
++	/* leave clock enabled */
++	W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_CLK | bits));
++	dummy = R_SBREG(sbh, &sb->sbtmstatelow);
++	OSL_DELAY(1);
 +}
 +
-+/* set/clear sbtmstatehigh core-specific flags */
-+uint32
-+sb_coreflagshi(void *sbh, uint32 mask, uint32 val)
++void
++sb_core_tofixup(void *sbh)
 +{
 +	sb_info_t *si;
 +	sbconfig_t *sb;
-+	uint32 w;
 +
 +	si = SB_INFO(sbh);
-+	sb = REGS2SB(si->curmap);
 +
-+	ASSERT((val & ~mask) == 0);
-+	ASSERT((mask & ~SBTMH_FL_MASK) == 0);
++	if (si->pcirev >= 5)
++		return;
 +
-+	/* mask and set */
-+	if (mask || val) {
-+		w = (R_SBREG(sbh, &sb->sbtmstatehigh) & ~mask) | val;
-+		W_SBREG(sbh, &sb->sbtmstatehigh, w);
++	ASSERT(GOODREGS(si->curmap));
++	sb = REGS2SB(si->curmap);
++
++	if (si->bus == SB_BUS) {
++		SET_SBREG(sbh, &sb->sbimconfiglow,
++			  SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
++			  (0x5 << SBIMCL_RTO_SHIFT) | 0x3);
++	} else {
++		if (sb_coreid(sbh) == SB_PCI) {
++			SET_SBREG(sbh, &sb->sbimconfiglow,
++				  SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
++				  (0x3 << SBIMCL_RTO_SHIFT) | 0x2);
++		} else {
++			SET_SBREG(sbh, &sb->sbimconfiglow, (SBIMCL_RTO_MASK | SBIMCL_STO_MASK), 0);
++		}
 +	}
 +
-+	/* return the new value */
-+	return (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_FL_MASK);
++	sb_commit(sbh);
 +}
 +
-+bool
-+sb_iscoreup(void *sbh)
++void
++sb_core_disable(void *sbh, uint32 bits)
 +{
 +	sb_info_t *si;
++	volatile uint32 dummy;
 +	sbconfig_t *sb;
 +
 +	si = SB_INFO(sbh);
-+	sb = REGS2SB(si->curmap);
-+
-+	return ((R_SBREG(sbh, &(sb)->sbtmstatelow) & (SBTML_RESET | SBTML_REJ | SBTML_CLK)) == SBTML_CLK);
-+}
-+
-+/*
-+ * Switch to 'coreidx', issue a single arbitrary 32bit register mask&set operation,
-+ * switch back to the original core, and return the new value.
-+ */
-+static uint
-+sb_corereg(void *sbh, uint coreidx, uint regoff, uint mask, uint val)
-+{
-+	sb_info_t *si;
-+	uint origidx;
-+	uint32 *r;
-+	uint w;
-+	uint intr_val = 0;
 +
-+	ASSERT(GOODIDX(coreidx));
-+	ASSERT(regoff < SB_CORE_SIZE);
-+	ASSERT((val & ~mask) == 0);
++	ASSERT(GOODREGS(si->curmap));
++	sb = REGS2SB(si->curmap);
 +
-+	si = SB_INFO(sbh);
++	/* must return if core is already in reset */
++	if (R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_RESET)
++		return;
 +
-+	/* save current core index */
-+	origidx = sb_coreidx(sbh);
++	/* put into reset and return if clocks are not enabled */
++	if ((R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_CLK) == 0)
++		goto disable;
 +
-+	/* switch core */
-+	INTR_OFF(si, intr_val);
-+	r = (uint32*) ((uint) sb_setcoreidx(sbh, coreidx) + regoff);
++	/* set the reject bit */
++	W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_CLK | SBTML_REJ));
 +
-+	/* mask and set */
-+	if (mask || val) {
-+		if (regoff >= SBCONFIGOFF) {
-+			w = (R_SBREG(sbh, r) & ~mask) | val;
-+			W_SBREG(sbh, r, w);
-+		} else {
-+			w = (R_REG(r) & ~mask) | val;
-+			W_REG(r, w);
-+		}
-+	}
++	/* spin until reject is set */
++	while ((R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_REJ) == 0)
++		OSL_DELAY(1);
 +
-+	/* readback */
-+	w = R_SBREG(sbh, r);
++	/* spin until sbtmstatehigh.busy is clear */
++	while (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_BUSY)
++		OSL_DELAY(1);
 +
-+	/* restore core index */
-+	if (origidx != coreidx)
-+		sb_setcoreidx(sbh, origidx);
++	/* set reset and reject while enabling the clocks */
++	W_SBREG(sbh, &sb->sbtmstatelow, (bits | SBTML_FGC | SBTML_CLK | SBTML_REJ | SBTML_RESET));
++	dummy = R_SBREG(sbh, &sb->sbtmstatelow);
++	OSL_DELAY(10);
 +
-+	INTR_RESTORE(si, intr_val);
-+	return (w);
++ disable:
++	/* leave reset and reject asserted */
++	W_SBREG(sbh, &sb->sbtmstatelow, (bits | SBTML_REJ | SBTML_RESET));
++	OSL_DELAY(1);
 +}
 +
-+/* scan the sb enumerated space to identify all cores */
-+static void
-+sb_scan(sb_info_t *si)
++void
++sb_watchdog(void *sbh, uint ticks)
 +{
-+	void *sbh;
-+	uint origidx;
-+	uint i;
-+
-+	sbh = (void*) si;
-+
-+	/* numcores should already be set */
-+	ASSERT((si->numcores > 0) && (si->numcores <= SB_MAXCORES));
-+
-+	/* save current core index */
-+	origidx = sb_coreidx(sbh);
-+
-+	si->pciidx = si->gpioidx = BADIDX;
-+
-+	for (i = 0; i < si->numcores; i++) {
-+		sb_setcoreidx(sbh, i);
-+		si->coreid[i] = sb_coreid(sbh);
++	sb_info_t *si = SB_INFO(sbh);
 +
-+		if (si->coreid[i] == SB_CC)
-+			si->ccrev = sb_corerev(sbh);
++	/* instant NMI */
++	switch (si->gpioid) {
++	case SB_CC:
++		sb_corereg(sbh, si->gpioidx, OFFSETOF(chipcregs_t, watchdog), ~0, ticks);
++		break;
++	case SB_EXTIF:
++		sb_corereg(sbh, si->gpioidx, OFFSETOF(extifregs_t, watchdog), ~0, ticks);
++		break;
++	}
++}
 +
-+		else if (si->coreid[i] == SB_PCI) {
-+			si->pciidx = i;
-+			si->pcirev = sb_corerev(sbh);
++/* initialize the pcmcia core */
++void
++sb_pcmcia_init(void *sbh)
++{
++	sb_info_t *si;
++	uint8 cor;
 +
-+		}else if (si->coreid[i] == SB_PCMCIA){
-+			si->pcmciaidx = i;
-+			si->pcmciarev = sb_corerev(sbh);
-+		}
-+	}
++	si = SB_INFO(sbh);
 +
-+	/*
-+	 * Find the gpio "controlling core" type and index.
-+	 * Precedence:
-+	 * - if there's a chip common core - use that
-+	 * - else if there's a pci core (rev >= 2) - use that
-+	 * - else there had better be an extif core (4710 only)
-+	 */
-+	if (GOODIDX(sb_findcoreidx(sbh, SB_CC, 0))) {
-+		si->gpioidx = sb_findcoreidx(sbh, SB_CC, 0);
-+		si->gpioid = SB_CC;
-+	} else if (GOODIDX(si->pciidx) && (si->pcirev >= 2)) {
-+		si->gpioidx = si->pciidx;
-+		si->gpioid = SB_PCI;
-+	} else if (sb_findcoreidx(sbh, SB_EXTIF, 0)) {
-+		si->gpioidx = sb_findcoreidx(sbh, SB_EXTIF, 0);
-+		si->gpioid = SB_EXTIF;
++	/* enable d11 mac interrupts */
++	if (si->chip == BCM4301_DEVICE_ID) {
++		/* Have to use FCR2 in 4301 */
++		OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1);
++		cor |= COR_IRQEN | COR_FUNEN;
++		OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1);
++	} else {
++		OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1);
++		cor |= COR_IRQEN | COR_FUNEN;
++		OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1);
 +	}
 +
-+	/* return to original core index */
-+	sb_setcoreidx(sbh, origidx);
 +}
 +
-+/* may be called with core in reset */
++
++/*
++ * Configure the pci core for pci client (NIC) action
++ * and get appropriate dma offset value.
++ * coremask is the bitvec of cores by index to be enabled.
++ */
 +void
-+sb_detach(void *sbh)
++sb_pci_setup(void *sbh, uint32 *dmaoffset, uint coremask)
 +{
 +	sb_info_t *si;
++	sbconfig_t *sb;
++	sbpciregs_t *pciregs;
++	uint32 sbflag;
++	uint32 w;
 +	uint idx;
 +
 +	si = SB_INFO(sbh);
 +
-+	if (si == NULL)
-+		return;
++	if (dmaoffset)
++		*dmaoffset = 0;
 +
-+	if (si->bus == SB_BUS)
-+		for (idx = 0; idx < SB_MAXCORES; idx++)
-+			if (si->regs[idx]) {
-+				REG_UNMAP(si->regs[idx]);
-+				si->regs[idx] = NULL;
-+			}
++	/* if not pci bus, we're done */
++	if (si->bus != PCI_BUS)
++		return;
 +
-+	MFREE(si, sizeof (sb_info_t));
-+}
++	ASSERT(si->pciidx);
 +
-+/* use pci dev id to determine chip id for chips not having a chipcommon core */
-+static uint
-+sb_pcidev2chip(uint pcidev)
-+{
-+	if ((pcidev >= BCM4710_DEVICE_ID) && (pcidev <= BCM47XX_USB_ID))
-+		return (BCM4710_DEVICE_ID);
-+	if ((pcidev >= BCM4610_DEVICE_ID) && (pcidev <= BCM4610_USB_ID))
-+		return (BCM4610_DEVICE_ID);
-+	if ((pcidev >= BCM4402_DEVICE_ID) && (pcidev <= BCM4402_V90_ID))
-+		return (BCM4402_DEVICE_ID);
-+	if ((pcidev >= BCM4307_V90_ID) && (pcidev <= BCM4307_D11B_ID))
-+		return (BCM4307_DEVICE_ID);
-+	if (pcidev == BCM4301_DEVICE_ID)
-+		return (BCM4301_DEVICE_ID);
++	/* get current core index */
++	idx = si->curidx;
 +
-+	return (0);
-+}
++	/* we interrupt on this backplane flag number */
++	ASSERT(GOODREGS(si->curmap));
++	sb = REGS2SB(si->curmap);
++	sbflag = R_SBREG(sbh, &sb->sbtpsflag) & SBTPS_NUM0_MASK;
 +
-+/* convert chip number to number of i/o cores */
-+static uint
-+sb_chip2numcores(uint chip)
-+{
-+	if (chip == 0x4710)
-+		return (9);
-+	if (chip == 0x4610)
-+		return (9);
-+	if (chip == 0x4402)
-+		return (3);
-+	if ((chip == 0x4307) || (chip == 0x4301))
-+		return (5);
-+	if (chip == 0x4310)
-+		return (8);
-+	if (chip == 0x4306)	/* < 4306c0 */
-+		return (6);
-+	if (chip == 0x4704)
-+		return (9);
-+	if (chip == 0x5365)
-+		return (7);
++	/* switch over to pci core */
++	pciregs = (sbpciregs_t*) sb_setcoreidx(sbh, si->pciidx);
++	sb = REGS2SB(pciregs);
 +
-+	SB_ERROR(("sb_chip2numcores: unsupported chip 0x%x\n", chip));
-+	ASSERT(0);
-+	return (1);
-+}
++	/*
++	 * Enable sb->pci interrupts.  Assume
++	 * PCI rev 2.3 support was added in pci core rev 6 and things changed..
++	 */
++	if (si->pcirev < 6) {
++		/* set sbintvec bit for our flag number */
++		OR_SBREG(sbh, &sb->sbintvec, (1 << sbflag));
++	} else {
++		/* pci config write to set this core bit in PCIIntMask */
++		w = OSL_PCI_READ_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32));
++		w |= (coremask << PCI_SBIM_SHIFT);
++		OSL_PCI_WRITE_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32), w);
++	}
 +
-+/* return index of coreid or BADIDX if not found */
-+static uint
-+sb_findcoreidx(void *sbh, uint coreid, uint coreunit)
-+{
-+	sb_info_t *si;
-+	uint found;
-+	uint i;
++	/* enable prefetch and bursts for sonics-to-pci translation 2 */
++	OR_REG(&pciregs->sbtopci2, (SBTOPCI_PREF|SBTOPCI_BURST));
 +
-+	si = SB_INFO(sbh);
-+	found = 0;
++	if (si->pcirev < 5) {
++		SET_SBREG(sbh, &sb->sbimconfiglow, SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
++			(0x3 << SBIMCL_RTO_SHIFT) | 0x2);
++		sb_commit(sbh);
++	}
 +
-+	for (i = 0; i < si->numcores; i++)
-+		if (si->coreid[i] == coreid) {
-+			if (found == coreunit)
-+				return (i);
-+			found++;
-+		}
++	/* switch back to previous core */
++	sb_setcoreidx(sbh, idx);
 +
-+	return (BADIDX);
++	/* use large sb pci dma window */
++	if (dmaoffset)
++		*dmaoffset = SB_PCI_DMA;
 +}
 +
-+/* change logical "focus" to the indiciated core */
-+void*
-+sb_setcoreidx(void *sbh, uint coreidx)
++uint32
++sb_base(uint32 admatch)
 +{
-+	sb_info_t *si;
-+	uint32 sbaddr;
-+	uint8 tmp;
-+
-+	si = SB_INFO(sbh);
-+
-+	if (coreidx >= si->numcores)
-+		return (NULL);
-+
-+	/*
-+	 * If the user has provided an interrupt mask enabled function,
-+	 * then assert interrupts are disabled before switching the core.
-+	 */
-+	ASSERT((si->imf == NULL) || !(*si->imf)(si->imfarg));
-+
-+	sbaddr = SB_ENUM_BASE + (coreidx * SB_CORE_SIZE);
++	uint32 base;
++	uint type;
 +
-+	switch (si->bus) {
-+	case SB_BUS:
-+		/* map new one */
-+		if (!si->regs[coreidx]) {
-+			si->regs[coreidx] = (void*)REG_MAP(sbaddr, SB_CORE_SIZE);
-+			ASSERT(GOODREGS(si->regs[coreidx]));
-+		}
-+		si->curmap = si->regs[coreidx];
-+		break;
++	type = admatch & SBAM_TYPE_MASK;
++	ASSERT(type < 3);
 +
-+	case PCI_BUS:
-+		/* point bar0 window */
-+		OSL_PCI_WRITE_CONFIG(si->osh, PCI_BAR0_WIN, 4, sbaddr);
-+		break;
++	base = 0;
 +
-+	case PCMCIA_BUS:
-+		tmp = (sbaddr >> 12) & 0x0f;
-+		OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR0, &tmp, 1);
-+		tmp = (sbaddr >> 16) & 0xff;
-+		OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR1, &tmp, 1);
-+		tmp = (sbaddr >> 24) & 0xff;
-+		OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_ADDR2, &tmp, 1);
-+		break;
++	if (type == 0) {
++		base = admatch & SBAM_BASE0_MASK;
++	} else if (type == 1) {
++		ASSERT(!(admatch & SBAM_ADNEG));	/* neg not supported */
++		base = admatch & SBAM_BASE1_MASK;
++	} else if (type == 2) {
++		ASSERT(!(admatch & SBAM_ADNEG));	/* neg not supported */
++		base = admatch & SBAM_BASE2_MASK;
 +	}
 +
-+	si->curidx = coreidx;
-+
-+	return (si->curmap);
++	return (base);
 +}
 +
-+/* change logical "focus" to the indicated core */
-+void*
-+sb_setcore(void *sbh, uint coreid, uint coreunit)
++uint32
++sb_size(uint32 admatch)
 +{
-+	sb_info_t *si;
-+	uint idx;
++	uint32 size;
++	uint type;
 +
-+	si = SB_INFO(sbh);
++	type = admatch & SBAM_TYPE_MASK;
++	ASSERT(type < 3);
 +
-+	idx = sb_findcoreidx(sbh, coreid, coreunit);
-+	if (!GOODIDX(idx))
-+		return (NULL);
++	size = 0;
 +
-+	return (sb_setcoreidx(sbh, idx));
++	if (type == 0) {
++		size = 1 << (((admatch & SBAM_ADINT0_MASK) >> SBAM_ADINT0_SHIFT) + 1);
++	} else if (type == 1) {
++		ASSERT(!(admatch & SBAM_ADNEG));	/* neg not supported */
++		size = 1 << (((admatch & SBAM_ADINT1_MASK) >> SBAM_ADINT1_SHIFT) + 1);
++	} else if (type == 2) {
++		ASSERT(!(admatch & SBAM_ADNEG));	/* neg not supported */
++		size = 1 << (((admatch & SBAM_ADINT2_MASK) >> SBAM_ADINT2_SHIFT) + 1);
++	}
++
++	return (size);
 +}
 +
-+/* return chip number */
++/* return the core-type instantiation # of the current core */
 +uint
-+sb_chip(void *sbh)
++sb_coreunit(void *sbh)
 +{
 +	sb_info_t *si;
++	uint idx;
++	uint coreid;
++	uint coreunit;
++	uint i;
 +
 +	si = SB_INFO(sbh);
-+	return (si->chip);
-+}
++	coreunit = 0;
 +
-+/* return chip revision number */
-+uint
-+sb_chiprev(void *sbh)
-+{
-+	sb_info_t *si;
++	idx = si->curidx;
 +
-+	si = SB_INFO(sbh);
-+	return (si->chiprev);
-+}
++	ASSERT(GOODREGS(si->curmap));
++	coreid = sb_coreid(sbh);
 +
-+/* return chip package option */
-+uint
-+sb_chippkg(void *sbh)
-+{
-+	sb_info_t *si;
++	/* count the cores of our type */
++	for (i = 0; i < idx; i++)
++		if (si->coreid[i] == coreid)
++			coreunit++;
 +
-+	si = SB_INFO(sbh);
-+	return (si->chippkg);
++	return (coreunit);
 +}
 +
-+/* return board vendor id */
-+uint
-+sb_boardvendor(void *sbh)
++static INLINE uint32
++factor6(uint32 x)
 +{
-+	sb_info_t *si;
-+
-+	si = SB_INFO(sbh);
-+	return (si->boardvendor);
++	switch (x) {
++	case CC_F6_2:	return 2;
++	case CC_F6_3:	return 3;
++	case CC_F6_4:	return 4;
++	case CC_F6_5:	return 5;
++	case CC_F6_6:	return 6;
++	case CC_F6_7:	return 7;
++	default:	return 0;
++	}
 +}
 +
-+/* return boardtype */
-+uint
-+sb_boardtype(void *sbh)
++/* calculate the speed the SB would run at given a set of clockcontrol values */
++uint32
++sb_clock_rate(uint32 pll_type, uint32 n, uint32 m)
 +{
-+	sb_info_t *si;
-+	char *var;
++	uint32 n1, n2, clock, m1, m2, m3, mc;
 +
-+	si = SB_INFO(sbh);
++	n1 = n & CN_N1_MASK;
++	n2 = (n & CN_N2_MASK) >> CN_N2_SHIFT;
 +
-+	if (si->bus == SB_BUS && si->boardtype == 0xffff) {
-+		/* boardtype format is a hex string */
-+		si->boardtype = getintvar(NULL, "boardtype");
++	if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE4)) {
++		n1 = factor6(n1);
++		n2 += CC_F5_BIAS;
++	} else if (pll_type == PLL_TYPE2) {
++		n1 += CC_T2_BIAS;
++		n2 += CC_T2_BIAS;
++		ASSERT((n1 >= 2) && (n1 <= 7));
++		ASSERT((n2 >= 5) && (n2 <= 23));
++	} else if (pll_type == PLL_TYPE3) {
++		return (100000000);
++	} else
++		ASSERT((pll_type >= PLL_TYPE1) && (pll_type <= PLL_TYPE4));
 +
-+		/* backward compatibility for older boardtype string format */
-+		if ((si->boardtype == 0) && (var = getvar(NULL, "boardtype"))) {
-+			if (!strcmp(var, "bcm94710dev"))
-+				si->boardtype = BCM94710D_BOARD;
-+			else if (!strcmp(var, "bcm94710ap"))
-+				si->boardtype = BCM94710AP_BOARD;
-+			else if (!strcmp(var, "bcm94310u"))
-+				si->boardtype = BCM94310U_BOARD;
-+			else if (!strcmp(var, "bu4711"))
-+				si->boardtype = BU4711_BOARD;
-+			else if (!strcmp(var, "bu4710"))
-+				si->boardtype = BU4710_BOARD;
-+			else if (!strcmp(var, "bcm94702mn"))
-+				si->boardtype = BCM94702MN_BOARD;
-+			else if (!strcmp(var, "bcm94710r1"))
-+				si->boardtype = BCM94710R1_BOARD;
-+			else if (!strcmp(var, "bcm94710r4"))
-+				si->boardtype = BCM94710R4_BOARD;
-+			else if (!strcmp(var, "bcm94702cpci"))
-+    				si->boardtype = BCM94702CPCI_BOARD;
-+			else if (!strcmp(var, "bcm95380_rr"))
-+    				si->boardtype = BCM95380RR_BOARD; 
++	clock = CC_CLOCK_BASE * n1 * n2;
++
++	if (clock == 0)
++		return 0;
++
++	m1 = m & CC_M1_MASK;
++	m2 = (m & CC_M2_MASK) >> CC_M2_SHIFT;
++	m3 = (m & CC_M3_MASK) >> CC_M3_SHIFT;
++	mc = (m & CC_MC_MASK) >> CC_MC_SHIFT;
++
++	if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE4)) {
++		m1 = factor6(m1);
++		if (pll_type == PLL_TYPE1)
++			m2 += CC_F5_BIAS;
++		else
++			m2 = factor6(m2);
++		m3 = factor6(m3);
++
++		switch (mc) {
++		case CC_MC_BYPASS:	return (clock);
++		case CC_MC_M1:		return (clock / m1);
++		case CC_MC_M1M2:	return (clock / (m1 * m2));
++		case CC_MC_M1M2M3:	return (clock / (m1 * m2 * m3));
++		case CC_MC_M1M3:	return (clock / (m1 * m3));
++		default:		return (0);
 +		}
-+	}
++	} else {
++		ASSERT(pll_type == PLL_TYPE2);
 +
-+	return (si->boardtype);
++		m1 += CC_T2_BIAS;
++		m2 += CC_T2M2_BIAS;
++		m3 += CC_T2_BIAS;
++		ASSERT((m1 >= 2) && (m1 <= 7));
++		ASSERT((m2 >= 3) && (m2 <= 10));
++		ASSERT((m3 >= 2) && (m3 <= 7));
++
++		if ((mc & CC_T2MC_M1BYP) == 0)
++			clock /= m1;
++		if ((mc & CC_T2MC_M2BYP) == 0)
++			clock /= m2;
++		if ((mc & CC_T2MC_M3BYP) == 0)
++			clock /= m3;
++
++		return(clock);
++	}
 +}
 +
-+/* return board bus style */
-+uint
-+sb_boardstyle(void *sbh)
++/* returns the current speed the SB is running at */
++uint32
++sb_clock(void *sbh)
 +{
 +	sb_info_t *si;
-+	uint16 w;
++	extifregs_t *eir;
++	chipcregs_t *cc;
++	uint32 n, m;
++	uint idx;
++	uint32 pll_type, rate;
++	uint intr_val = 0;
 +
 +	si = SB_INFO(sbh);
++	idx = si->curidx;
++	pll_type = PLL_TYPE1;
 +
-+	if (si->bus == PCMCIA_BUS)
-+		return (BOARDSTYLE_PCMCIA);
++	INTR_OFF(si, intr_val);
 +
-+	if (si->bus == SB_BUS)
-+		return (BOARDSTYLE_SOC);
++	/* switch to extif or chipc core */
++	if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
++		n = R_REG(&eir->clockcontrol_n);
++		m = R_REG(&eir->clockcontrol_sb);
++	} else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
++		pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK;
++		n = R_REG(&cc->clockcontrol_n);
++		m = R_REG(&cc->clockcontrol_sb);
++	} else {
++		INTR_RESTORE(si, intr_val);
++		return 0;
++	}
 +
-+	/* bus is PCI */
++	/* calculate rate */
++	rate = sb_clock_rate(pll_type, n, m);
 +
-+	if (OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_CIS, sizeof (uint32)) != 0)
-+		return (BOARDSTYLE_CARDBUS);
++	/* switch back to previous core */
++	sb_setcoreidx(sbh, idx);
 +
-+	if ((srom_read(si->bus, si->curmap, si->osh, (SPROM_SIZE - 1) * 2, 2, &w) == 0) &&
-+	    (w == 0x0313))
-+		return (BOARDSTYLE_CARDBUS);
++	INTR_RESTORE(si, intr_val);
 +
-+	return (BOARDSTYLE_PCI);
++	return rate;
 +}
 +
-+/* return boolean if sbh device is in pci hostmode or client mode */
-+uint
-+sb_bus(void *sbh)
++/* change logical "focus" to the gpio core for optimized access */
++void*
++sb_gpiosetcore(void *sbh)
 +{
 +	sb_info_t *si;
 +
 +	si = SB_INFO(sbh);
-+	return (si->bus);
++
++	return (sb_setcoreidx(sbh, si->gpioidx));
 +}
 +
-+/* return list of found cores */
-+uint
-+sb_corelist(void *sbh, uint coreid[])
++/* mask&set gpiocontrol bits */
++uint32
++sb_gpiocontrol(void *sbh, uint32 mask, uint32 val)
 +{
 +	sb_info_t *si;
++	uint regoff;
 +
 +	si = SB_INFO(sbh);
++	regoff = 0;
 +
-+	bcopy((uchar*)si->coreid, (uchar*)coreid, (si->numcores * sizeof (uint)));
-+	return (si->numcores);
++	switch (si->gpioid) {
++	case SB_CC:
++		regoff = OFFSETOF(chipcregs_t, gpiocontrol);
++		break;
++
++	case SB_PCI:
++		regoff = OFFSETOF(sbpciregs_t, gpiocontrol);
++		break;
++
++	case SB_EXTIF:
++		return (0);
++	}
++
++	return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
 +}
 +
-+/* return current register mapping */
-+void *
-+sb_coreregs(void *sbh)
++/* mask&set gpio output enable bits */
++uint32
++sb_gpioouten(void *sbh, uint32 mask, uint32 val)
 +{
 +	sb_info_t *si;
++	uint regoff;
 +
 +	si = SB_INFO(sbh);
-+	ASSERT(GOODREGS(si->curmap));
++	regoff = 0;
 +
-+	return (si->curmap);
++	switch (si->gpioid) {
++	case SB_CC:
++		regoff = OFFSETOF(chipcregs_t, gpioouten);
++		break;
++
++	case SB_PCI:
++		regoff = OFFSETOF(sbpciregs_t, gpioouten);
++		break;
++
++	case SB_EXTIF:
++		regoff = OFFSETOF(extifregs_t, gpio[0].outen);
++		break;
++	}
++
++	return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
 +}
 +
-+/* Check if a target abort has happened and clear it */
-+bool
-+sb_taclear(void *sbh)
++/* mask&set gpio output bits */
++uint32
++sb_gpioout(void *sbh, uint32 mask, uint32 val)
 +{
 +	sb_info_t *si;
-+	bool rc = FALSE;
-+	sbconfig_t *sb;
++	uint regoff;
 +
 +	si = SB_INFO(sbh);
-+	sb = REGS2SB(si->curmap);
++	regoff = 0;
 +
-+	if (si->bus == PCI_BUS) {
-+		uint32 stcmd;
++	switch (si->gpioid) {
++	case SB_CC:
++		regoff = OFFSETOF(chipcregs_t, gpioout);
++		break;
 +
-+		stcmd = OSL_PCI_READ_CONFIG(si->osh, PCI_CFG_CMD, sizeof(stcmd));
-+		rc = (stcmd & 0x08000000) != 0;
++	case SB_PCI:
++		regoff = OFFSETOF(sbpciregs_t, gpioout);
++		break;
 +
-+		if (rc) {
-+			/* Target abort bit is set, clear it */
-+			OSL_PCI_WRITE_CONFIG(si->osh, PCI_CFG_CMD, sizeof(stcmd), stcmd);
-+		}
-+	} else if (si->bus == PCMCIA_BUS) {
-+		rc = FALSE;
-+	}
-+	else if (si->bus == SDIO_BUS) {
-+		/* due to 4317 A0 HW bug, sdio core wedged on target abort, 
-+		   just clear SBSErr bit blindly */
-+		if (0x0 != R_SBREG(sbh, &sb->sbtmerrlog)) {
-+			SB_ERROR(("SDIO target abort, clean it"));
-+			W_SBREG(sbh, &sb->sbtmstatehigh, 0);
-+		}
-+		rc = FALSE;
++	case SB_EXTIF:
++		regoff = OFFSETOF(extifregs_t, gpio[0].out);
++		break;
 +	}
 +
-+	return (rc);
++	return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
 +}
 +
-+/* do buffered registers update */
-+void
-+sb_commit(void *sbh)
++/* return the current gpioin register value */
++uint32
++sb_gpioin(void *sbh)
 +{
 +	sb_info_t *si;
-+	sbpciregs_t *pciregs;
-+	uint origidx;
-+	uint intr_val = 0;
++	uint regoff;
 +
 +	si = SB_INFO(sbh);
++	regoff = 0;
 +
-+	origidx = si->curidx;
-+	ASSERT(GOODIDX(origidx));
++	switch (si->gpioid) {
++	case SB_CC:
++		regoff = OFFSETOF(chipcregs_t, gpioin);
++		break;
 +
-+	INTR_OFF(si, intr_val);
-+	/* switch over to pci core */
-+	pciregs = (sbpciregs_t*) sb_setcore(sbh, SB_PCI, 0);
++	case SB_PCI:
++		regoff = OFFSETOF(sbpciregs_t, gpioin);
++		break;
 +
-+	/* do the buffer registers update */
-+	W_REG(&pciregs->bcastaddr, SB_COMMIT);
-+	W_REG(&pciregs->bcastdata, 0x0);
++	case SB_EXTIF:
++		regoff = OFFSETOF(extifregs_t, gpioin);
++		break;
++	}
 +
-+	/* restore core index */
-+	sb_setcoreidx(sbh, origidx);
-+	INTR_RESTORE(si, intr_val);
++	return (sb_corereg(sbh, si->gpioidx, regoff, 0, 0));
 +}
 +
-+/* reset and re-enable a core */
-+void
-+sb_core_reset(void *sbh, uint32 bits)
++/* mask&set gpio interrupt polarity bits */
++uint32
++sb_gpiointpolarity(void *sbh, uint32 mask, uint32 val)
 +{
 +	sb_info_t *si;
-+	sbconfig_t *sb;
-+	volatile uint32 dummy;
++	uint regoff;
 +
 +	si = SB_INFO(sbh);
-+	ASSERT(GOODREGS(si->curmap));
-+	sb = REGS2SB(si->curmap);
-+
-+	/*
-+	 * Must do the disable sequence first to work for arbitrary current core state.
-+	 */
-+	sb_core_disable(sbh, bits);
++	regoff = 0;
 +
-+	/*
-+	 * Now do the initialization sequence.
-+	 */
++	switch (si->gpioid) {
++	case SB_CC:
++		regoff = OFFSETOF(chipcregs_t, gpiointpolarity);
++		break;
 +
-+	/* set reset while enabling the clock and forcing them on throughout the core */
-+	W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | SBTML_RESET | bits));
-+	dummy = R_SBREG(sbh, &sb->sbtmstatelow);
++	case SB_PCI:
++		/* pci gpio implementation does not support interrupt polarity */
++		ASSERT(0);
++		break;
 +
-+	if (sb_coreid(sbh) == SB_ILINE100) {
-+		bcm_mdelay(50);
-+	} else {
-+		OSL_DELAY(1);
++	case SB_EXTIF:
++		regoff = OFFSETOF(extifregs_t, gpiointpolarity);
++		break;
 +	}
 +
-+	if (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_SERR) {
-+		W_SBREG(sbh, &sb->sbtmstatehigh, 0);
-+	}
-+	if ((dummy = R_SBREG(sbh, &sb->sbimstate)) & (SBIM_IBE | SBIM_TO)) {
-+		AND_SBREG(sbh, &sb->sbimstate, ~(SBIM_IBE | SBIM_TO));
-+	}
++	return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
++}
 +
-+	/* clear reset and allow it to propagate throughout the core */
-+	W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_FGC | SBTML_CLK | bits));
-+	dummy = R_SBREG(sbh, &sb->sbtmstatelow);
-+	OSL_DELAY(1);
++/* mask&set gpio interrupt mask bits */
++uint32
++sb_gpiointmask(void *sbh, uint32 mask, uint32 val)
++{
++	sb_info_t *si;
++	uint regoff;
 +
-+	/* leave clock enabled */
-+	W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_CLK | bits));
-+	dummy = R_SBREG(sbh, &sb->sbtmstatelow);
-+	OSL_DELAY(1);
++	si = SB_INFO(sbh);
++	regoff = 0;
++
++	switch (si->gpioid) {
++	case SB_CC:
++		regoff = OFFSETOF(chipcregs_t, gpiointmask);
++		break;
++
++	case SB_PCI:
++		/* pci gpio implementation does not support interrupt mask */
++		ASSERT(0);
++		break;
++
++	case SB_EXTIF:
++		regoff = OFFSETOF(extifregs_t, gpiointmask);
++		break;
++	}
++
++	return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
 +}
 +
-+void
-+sb_core_tofixup(void *sbh)
++
++/*
++ * Return the slowclock min or max frequency.
++ * Three sources of SLOW CLOCK:
++ *	1. On Chip LPO         -     32khz or 160khz
++ *	2. On Chip Xtal OSC    -     20mhz/4*(divider+1) 
++ *	3. External PCI clock  -     66mhz/4*(divider+1)
++ */
++static uint
++slowfreq(void *sbh, bool max)
 +{
 +	sb_info_t *si;
-+	sbconfig_t *sb;
++	chipcregs_t *cc;
++	uint32 v;
++	uint div;
 +
 +	si = SB_INFO(sbh);
 +
-+	if (si->pcirev >= 5)
-+		return;
++	ASSERT(sb_coreid(sbh) == SB_CC);
 +
-+	ASSERT(GOODREGS(si->curmap));
-+	sb = REGS2SB(si->curmap);
++	cc = (chipcregs_t*) sb_setcoreidx(sbh, si->curidx);
 +
-+	if (si->bus == SB_BUS) {
-+		SET_SBREG(sbh, &sb->sbimconfiglow,
-+			  SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
-+			  (0x5 << SBIMCL_RTO_SHIFT) | 0x3);
++	/* shouldn't be here unless we've established the chip has dynamic power control */
++	ASSERT(R_REG(&cc->capabilities) & CAP_PWR_CTL);
++
++	if (si->ccrev < 6) {
++		v = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32));
++
++		if (v & PCI_CFG_GPIO_SCS)
++			return (max? (PCIMAXFREQ/64) : (PCIMINFREQ/64));
++		else
++			return (max? (XTALMAXFREQ/32) : (XTALMINFREQ/32));
 +	} else {
-+		if (sb_coreid(sbh) == SB_PCI) {
-+			SET_SBREG(sbh, &sb->sbimconfiglow,
-+				  SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
-+				  (0x3 << SBIMCL_RTO_SHIFT) | 0x2);
-+		} else {
-+			SET_SBREG(sbh, &sb->sbimconfiglow, (SBIMCL_RTO_MASK | SBIMCL_STO_MASK), 0);
-+		}
++		v = R_REG(&cc->slow_clk_ctl) & SCC_SS_MASK;
++		div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHF) + 1);
++		if (v == SCC_SS_LPO)
++			return (max? LPOMAXFREQ : LPOMINFREQ);
++		else if (v == SCC_SS_XTAL)
++			return (max? (XTALMAXFREQ/div) : (XTALMINFREQ/div));
++		else if (v == SCC_SS_PCI)
++			return (max? (PCIMAXFREQ/div) : (PCIMINFREQ/div));
++		else
++			ASSERT(0);
 +	}
-+
-+	sb_commit(sbh);
++	return (0);
 +}
 +
++/* initialize power control delay registers */
 +void
-+sb_core_disable(void *sbh, uint32 bits)
++sb_pwrctl_init(void *sbh)
 +{
 +	sb_info_t *si;
-+	volatile uint32 dummy;
-+	sbconfig_t *sb;
++	uint origidx;
++	chipcregs_t *cc;
++	uint slowmaxfreq;
++	uint pll_on_delay, fref_sel_delay;
 +
 +	si = SB_INFO(sbh);
 +
-+	ASSERT(GOODREGS(si->curmap));
-+	sb = REGS2SB(si->curmap);
-+
-+	/* must return if core is already in reset */
-+	if (R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_RESET)
++	if (si->bus == SB_BUS)
 +		return;
 +
-+	/* put into reset and return if clocks are not enabled */
-+	if ((R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_CLK) == 0)
-+		goto disable;
-+
-+	/* set the reject bit */
-+	W_SBREG(sbh, &sb->sbtmstatelow, (SBTML_CLK | SBTML_REJ));
++	origidx = si->curidx;
 +
-+	/* spin until reject is set */
-+	while ((R_SBREG(sbh, &sb->sbtmstatelow) & SBTML_REJ) == 0)
-+		OSL_DELAY(1);
++	if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL)
++		return;
 +
-+	/* spin until sbtmstatehigh.busy is clear */
-+	while (R_SBREG(sbh, &sb->sbtmstatehigh) & SBTMH_BUSY)
-+		OSL_DELAY(1);
++	if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL))
++		goto done;
 +
-+	/* set reset and reject while enabling the clocks */
-+	W_SBREG(sbh, &sb->sbtmstatelow, (bits | SBTML_FGC | SBTML_CLK | SBTML_REJ | SBTML_RESET));
-+	dummy = R_SBREG(sbh, &sb->sbtmstatelow);
-+	OSL_DELAY(10);
++	slowmaxfreq = slowfreq(sbh, TRUE);
++	pll_on_delay = ((slowmaxfreq * PLL_DELAY) + 999999) / 1000000;
++	fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000;
 +
-+ disable:
-+	/* leave reset and reject asserted */
-+	W_SBREG(sbh, &sb->sbtmstatelow, (bits | SBTML_REJ | SBTML_RESET));
-+	OSL_DELAY(1);
-+}
++	W_REG(&cc->pll_on_delay, pll_on_delay);
++	W_REG(&cc->fref_sel_delay, fref_sel_delay);
 +
-+void
-+sb_watchdog(void *sbh, uint ticks)
-+{
-+	sb_info_t *si = SB_INFO(sbh);
++	/* 4317pc does not work with SlowClock less than 5Mhz */
++	if (si->bus == PCMCIA_BUS)
++		SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, (0 << SCC_CD_SHF));
 +
-+	/* instant NMI */
-+	switch (si->gpioid) {
-+	case SB_CC:
-+		sb_corereg(sbh, si->gpioidx, OFFSETOF(chipcregs_t, watchdog), ~0, ticks);
-+		break;
-+	case SB_EXTIF:
-+		sb_corereg(sbh, si->gpioidx, OFFSETOF(extifregs_t, watchdog), ~0, ticks);
-+		break;
-+	}
++done:
++	sb_setcoreidx(sbh, origidx);
 +}
 +
-+/* initialize the pcmcia core */
-+void
-+sb_pcmcia_init(void *sbh)
++/* return the value suitable for writing to the dot11 core FAST_PWRUP_DELAY register */
++uint16
++sb_pwrctl_fast_pwrup_delay(void *sbh)
 +{
 +	sb_info_t *si;
-+	uint8 cor;
++	uint origidx;
++	chipcregs_t *cc;
++	uint slowminfreq;
++	uint16 fpdelay;
++	uint intr_val = 0;
 +
 +	si = SB_INFO(sbh);
++	fpdelay = 0;
++	origidx = si->curidx;
 +
-+	/* enable d11 mac interrupts */
-+	if (si->chip == BCM4301_DEVICE_ID) {
-+		/* Have to use FCR2 in 4301 */
-+		OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1);
-+		cor |= COR_IRQEN | COR_FUNEN;
-+		OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR2 + PCMCIA_COR, &cor, 1);
-+	} else {
-+		OSL_PCMCIA_READ_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1);
-+		cor |= COR_IRQEN | COR_FUNEN;
-+		OSL_PCMCIA_WRITE_ATTR(si->osh, PCMCIA_FCR0 + PCMCIA_COR, &cor, 1);
-+	}
++	if (si->bus == SB_BUS)
++		goto done;
 +
-+}
++	INTR_OFF(si, intr_val);
 +
++	if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL)
++		goto done;
 +
-+/*
-+ * Configure the pci core for pci client (NIC) action
-+ * and get appropriate dma offset value.
-+ * coremask is the bitvec of cores by index to be enabled.
-+ */
-+void
-+sb_pci_setup(void *sbh, uint32 *dmaoffset, uint coremask)
++	if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL))
++		goto done;
++
++	slowminfreq = slowfreq(sbh, FALSE);
++	fpdelay = (((R_REG(&cc->pll_on_delay) + 2) * 1000000) + (slowminfreq - 1)) / slowminfreq;
++
++done:
++	sb_setcoreidx(sbh, origidx);
++	INTR_RESTORE(si, intr_val);
++	return (fpdelay);
++}
++
++/* turn primary xtal and/or pll off/on */
++int
++sb_pwrctl_xtal(void *sbh, uint what, bool on)
 +{
 +	sb_info_t *si;
-+	sbconfig_t *sb;
-+	sbpciregs_t *pciregs;
-+	uint32 sbflag;
-+	uint32 w;
-+	uint idx;
++	uint32 in, out, outen;
 +
 +	si = SB_INFO(sbh);
 +
-+	if (dmaoffset)
-+		*dmaoffset = 0;
 +
-+	/* if not pci bus, we're done */
-+	if (si->bus != PCI_BUS)
-+		return;
++	if (si->bus == PCMCIA_BUS) {
++		return (0);
++	}
 +
-+	ASSERT(si->pciidx);
-+
-+	/* get current core index */
-+	idx = si->curidx;
-+
-+	/* we interrupt on this backplane flag number */
-+	ASSERT(GOODREGS(si->curmap));
-+	sb = REGS2SB(si->curmap);
-+	sbflag = R_SBREG(sbh, &sb->sbtpsflag) & SBTPS_NUM0_MASK;
++	if (si->bus != PCI_BUS) 
++		return (-1);
 +
-+	/* switch over to pci core */
-+	pciregs = (sbpciregs_t*) sb_setcoreidx(sbh, si->pciidx);
-+	sb = REGS2SB(pciregs);
++	in = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_IN, sizeof (uint32));
++	out = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32));
++	outen = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32));
 +
 +	/*
-+	 * Enable sb->pci interrupts.  Assume
-+	 * PCI rev 2.3 support was added in pci core rev 6 and things changed..
++	 * We can't actually read the state of the PLLPD so we infer it
++	 * by the value of XTAL_PU which *is* readable via gpioin.
 +	 */
-+	if (si->pcirev < 6) {
-+		/* set sbintvec bit for our flag number */
-+		OR_SBREG(sbh, &sb->sbintvec, (1 << sbflag));
-+	} else {
-+		/* pci config write to set this core bit in PCIIntMask */
-+		w = OSL_PCI_READ_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32));
-+		w |= (coremask << PCI_SBIM_SHIFT);
-+		OSL_PCI_WRITE_CONFIG(si->osh, PCI_INT_MASK, sizeof(uint32), w);
-+	}
++	if (on && (in & PCI_CFG_GPIO_XTAL))
++		return (0);
 +
-+	/* enable prefetch and bursts for sonics-to-pci translation 2 */
-+	OR_REG(&pciregs->sbtopci2, (SBTOPCI_PREF|SBTOPCI_BURST));
++	if (what & XTAL)
++		outen |= PCI_CFG_GPIO_XTAL;
++	if (what & PLL)
++		outen |= PCI_CFG_GPIO_PLL;
 +
-+	if (si->pcirev < 5) {
-+		SET_SBREG(sbh, &sb->sbimconfiglow, SBIMCL_RTO_MASK | SBIMCL_STO_MASK,
-+			(0x3 << SBIMCL_RTO_SHIFT) | 0x2);
-+		sb_commit(sbh);
-+	}
++	if (on) {
++		/* turn primary xtal on */
++		if (what & XTAL) {
++			out |= PCI_CFG_GPIO_XTAL;
++			if (what & PLL)
++				out |= PCI_CFG_GPIO_PLL;
++			OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out);
++			OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen);
++			OSL_DELAY(200);
++		}
 +
-+	/* switch back to previous core */
-+	sb_setcoreidx(sbh, idx);
++		/* turn pll on */
++		if (what & PLL) {
++			out &= ~PCI_CFG_GPIO_PLL;
++			OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out);
++			OSL_DELAY(2000);
++		}
++	} else {
++		if (what & XTAL)
++			out &= ~PCI_CFG_GPIO_XTAL;
++		if (what & PLL)
++			out |= PCI_CFG_GPIO_PLL;
++		OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out);
++		OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen);
++	}
 +
-+	/* use large sb pci dma window */
-+	if (dmaoffset)
-+		*dmaoffset = SB_PCI_DMA;
++	return (0);
 +}
 +
-+uint32
-+sb_base(uint32 admatch)
++/* set dynamic power control mode (forceslow, forcefast, dynamic) */
++/*   returns true if ignore pll off is set and false if it is not */
++bool
++sb_pwrctl_clk(void *sbh, uint mode)
 +{
-+	uint32 base;
-+	uint type;
++	sb_info_t *si;
++	uint origidx;
++	chipcregs_t *cc;
++	uint32 scc;
++	bool forcefastclk=FALSE;
++	uint intr_val = 0;
 +
-+	type = admatch & SBAM_TYPE_MASK;
-+	ASSERT(type < 3);
++	si = SB_INFO(sbh);
 +
-+	base = 0;
++	/* chipcommon cores prior to rev6 don't support slowclkcontrol */
++	if (si->ccrev < 6)
++		return (FALSE);
 +
-+	if (type == 0) {
-+		base = admatch & SBAM_BASE0_MASK;
-+	} else if (type == 1) {
-+		ASSERT(!(admatch & SBAM_ADNEG));	/* neg not supported */
-+		base = admatch & SBAM_BASE1_MASK;
-+	} else if (type == 2) {
-+		ASSERT(!(admatch & SBAM_ADNEG));	/* neg not supported */
-+		base = admatch & SBAM_BASE2_MASK;
-+	}
++	INTR_OFF(si, intr_val);
 +
-+	return (base);
-+}
++	origidx = si->curidx;
 +
-+uint32
-+sb_size(uint32 admatch)
-+{
-+	uint32 size;
-+	uint type;
++	cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0);
++	ASSERT(cc != NULL);
 +
-+	type = admatch & SBAM_TYPE_MASK;
-+	ASSERT(type < 3);
++	if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL))
++		goto done;
 +
-+	size = 0;
++	switch (mode) {
++	case CLK_FAST:	/* force fast (pll) clock */
++		/* don't forget to force xtal back on before we clear SCC_DYN_XTAL.. */
++		sb_pwrctl_xtal(sbh, XTAL, ON);
 +
-+	if (type == 0) {
-+		size = 1 << (((admatch & SBAM_ADINT0_MASK) >> SBAM_ADINT0_SHIFT) + 1);
-+	} else if (type == 1) {
-+		ASSERT(!(admatch & SBAM_ADNEG));	/* neg not supported */
-+		size = 1 << (((admatch & SBAM_ADINT1_MASK) >> SBAM_ADINT1_SHIFT) + 1);
-+	} else if (type == 2) {
-+		ASSERT(!(admatch & SBAM_ADNEG));	/* neg not supported */
-+		size = 1 << (((admatch & SBAM_ADINT2_MASK) >> SBAM_ADINT2_SHIFT) + 1);
++		SET_REG(&cc->slow_clk_ctl, (SCC_XC | SCC_FS | SCC_IP), SCC_IP);
++		break;
++
++	case CLK_SLOW:	/* force slow clock */
++		if ((si->bus == SDIO_BUS) || (si->bus == PCMCIA_BUS))
++			return (-1);
++
++		if (si->ccrev >= 6)
++			OR_REG(&cc->slow_clk_ctl, SCC_FS);
++		break;
++
++	case CLK_DYNAMIC:	/* enable dynamic power control */
++		scc = R_REG(&cc->slow_clk_ctl);
++		scc &= ~(SCC_FS | SCC_IP | SCC_XC);
++		if ((scc & SCC_SS_MASK) != SCC_SS_XTAL)
++			scc |= SCC_XC;
++		W_REG(&cc->slow_clk_ctl, scc);
++
++		/* for dynamic control, we have to release our xtal_pu "force on" */
++		if (scc & SCC_XC)
++			sb_pwrctl_xtal(sbh, XTAL, OFF);
++		break;
 +	}
++	
++	/* Is the h/w forcing the use of the fast clk */
++	forcefastclk = (bool)((R_REG(&cc->slow_clk_ctl) & SCC_IP) == SCC_IP);
 +
-+	return (size);
++done:
++	sb_setcoreidx(sbh, origidx);
++	INTR_RESTORE(si, intr_val);
++	return (forcefastclk);
 +}
 +
-+/* return the core-type instantiation # of the current core */
-+uint
-+sb_coreunit(void *sbh)
++/* register driver interrupt disabling and restoring callback functions */
++void
++sb_register_intr_callback(void *sbh, void *intrsoff_fn, void *intrsrestore_fn, void *intr_arg)
 +{
 +	sb_info_t *si;
-+	uint idx;
-+	uint coreid;
-+	uint coreunit;
-+	uint i;
 +
 +	si = SB_INFO(sbh);
-+	coreunit = 0;
++	si->intr_arg = intr_arg;
++	si->intrsoff_fn = (sb_intrsoff_t)intrsoff_fn;
++	si->intrsrestore_fn = (sb_intrsrestore_t)intrsrestore_fn;
++	/* save current core id.  when this function called, the current core
++	 * must be the core which provides driver functions(il, et, wl, etc.)
++	 */
++	si->dev_coreid = si->coreid[si->curidx];
++}
 +
-+	idx = si->curidx;
 +
-+	ASSERT(GOODREGS(si->curmap));
-+	coreid = sb_coreid(sbh);
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcm4710.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcm4710.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/bcm4710.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcm4710.h	2005-09-16 10:29:18.172592248 +0200
+@@ -0,0 +1,90 @@
++/*
++ * BCM4710 address space map and definitions
++ * Think twice before adding to this file, this is not the kitchen sink
++ * These definitions are not guaranteed for all 47xx chips, only the 4710
++ *
++ * Copyright 2001-2003, Broadcom Corporation   
++ * All Rights Reserved.   
++ *    
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
++ * $Id$
++ */
 +
-+	/* count the cores of our type */
-+	for (i = 0; i < idx; i++)
-+		if (si->coreid[i] == coreid)
-+			coreunit++;
++#ifndef _bcm4710_h_
++#define _bcm4710_h_
 +
-+	return (coreunit);
-+}
++/* Address map */
++#define BCM4710_SDRAM		0x00000000	/* Physical SDRAM */
++#define BCM4710_PCI_MEM		0x08000000	/* Host Mode PCI memory access space (64 MB) */
++#define BCM4710_PCI_CFG		0x0c000000	/* Host Mode PCI configuration space (64 MB) */
++#define BCM4710_PCI_DMA		0x40000000	/* Client Mode PCI memory access space (1 GB) */
++#define	BCM4710_SDRAM_SWAPPED	0x10000000	/* Byteswapped Physical SDRAM */
++#define BCM4710_ENUM		0x18000000	/* Beginning of core enumeration space */
 +
-+static INLINE uint32
-+factor6(uint32 x)
-+{
-+	switch (x) {
-+	case CC_F6_2:	return 2;
-+	case CC_F6_3:	return 3;
-+	case CC_F6_4:	return 4;
-+	case CC_F6_5:	return 5;
-+	case CC_F6_6:	return 6;
-+	case CC_F6_7:	return 7;
-+	default:	return 0;
-+	}
-+}
++/* Core register space */
++#define BCM4710_REG_SDRAM	0x18000000	/* SDRAM core registers */
++#define BCM4710_REG_ILINE20	0x18001000	/* InsideLine20 core registers */
++#define BCM4710_REG_EMAC0	0x18002000	/* Ethernet MAC 0 core registers */
++#define BCM4710_REG_CODEC	0x18003000	/* Codec core registers */
++#define BCM4710_REG_USB		0x18004000	/* USB core registers */
++#define BCM4710_REG_PCI		0x18005000	/* PCI core registers */
++#define BCM4710_REG_MIPS	0x18006000	/* MIPS core registers */
++#define BCM4710_REG_EXTIF	0x18007000	/* External Interface core registers */
++#define BCM4710_REG_EMAC1	0x18008000	/* Ethernet MAC 1 core registers */
 +
-+/* calculate the speed the SB would run at given a set of clockcontrol values */
-+uint32
-+sb_clock_rate(uint32 pll_type, uint32 n, uint32 m)
-+{
-+	uint32 n1, n2, clock, m1, m2, m3, mc;
++#define	BCM4710_EXTIF		0x1f000000	/* External Interface base address */
++#define BCM4710_PCMCIA_MEM	0x1f000000	/* External Interface PCMCIA memory access */
++#define BCM4710_PCMCIA_IO	0x1f100000	/* PCMCIA I/O access */
++#define BCM4710_PCMCIA_CONF	0x1f200000	/* PCMCIA configuration */
++#define BCM4710_PROG		0x1f800000	/* Programable interface */
++#define BCM4710_FLASH		0x1fc00000	/* Flash */
 +
-+	n1 = n & CN_N1_MASK;
-+	n2 = (n & CN_N2_MASK) >> CN_N2_SHIFT;
++#define	BCM4710_EJTAG		0xff200000	/* MIPS EJTAG space (2M) */
 +
-+	if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE4)) {
-+		n1 = factor6(n1);
-+		n2 += CC_F5_BIAS;
-+	} else if (pll_type == PLL_TYPE2) {
-+		n1 += CC_T2_BIAS;
-+		n2 += CC_T2_BIAS;
-+		ASSERT((n1 >= 2) && (n1 <= 7));
-+		ASSERT((n2 >= 5) && (n2 <= 23));
-+	} else if (pll_type == PLL_TYPE3) {
-+		return (100000000);
-+	} else
-+		ASSERT((pll_type >= PLL_TYPE1) && (pll_type <= PLL_TYPE4));
++#define	BCM4710_UART		(BCM4710_REG_EXTIF + 0x00000300)
 +
-+	clock = CC_CLOCK_BASE * n1 * n2;
++#define	BCM4710_EUART		(BCM4710_EXTIF + 0x00800000)
++#define	BCM4710_LED		(BCM4710_EXTIF + 0x00900000)
 +
-+	if (clock == 0)
-+		return 0;
++#define	SBFLAG_PCI	0
++#define	SBFLAG_ENET0	1
++#define	SBFLAG_ILINE20	2
++#define	SBFLAG_CODEC	3
++#define	SBFLAG_USB	4
++#define	SBFLAG_EXTIF	5
++#define	SBFLAG_ENET1	6
 +
-+	m1 = m & CC_M1_MASK;
-+	m2 = (m & CC_M2_MASK) >> CC_M2_SHIFT;
-+	m3 = (m & CC_M3_MASK) >> CC_M3_SHIFT;
-+	mc = (m & CC_MC_MASK) >> CC_MC_SHIFT;
++#ifdef	CONFIG_HWSIM
++#define	BCM4710_TRACE(trval)        do { *((int *)0xa0000f18) = (trval); } while (0)
++#else
++#define	BCM4710_TRACE(trval)
++#endif
 +
-+	if ((pll_type == PLL_TYPE1) || (pll_type == PLL_TYPE4)) {
-+		m1 = factor6(m1);
-+		if (pll_type == PLL_TYPE1)
-+			m2 += CC_F5_BIAS;
-+		else
-+			m2 = factor6(m2);
-+		m3 = factor6(m3);
 +
-+		switch (mc) {
-+		case CC_MC_BYPASS:	return (clock);
-+		case CC_MC_M1:		return (clock / m1);
-+		case CC_MC_M1M2:	return (clock / (m1 * m2));
-+		case CC_MC_M1M2M3:	return (clock / (m1 * m2 * m3));
-+		case CC_MC_M1M3:	return (clock / (m1 * m3));
-+		default:		return (0);
-+		}
-+	} else {
-+		ASSERT(pll_type == PLL_TYPE2);
++/* BCM94702 CPCI -ExtIF used for LocalBus devs */
 +
-+		m1 += CC_T2_BIAS;
-+		m2 += CC_T2M2_BIAS;
-+		m3 += CC_T2_BIAS;
-+		ASSERT((m1 >= 2) && (m1 <= 7));
-+		ASSERT((m2 >= 3) && (m2 <= 10));
-+		ASSERT((m3 >= 2) && (m3 <= 7));
++#define BCM94702_CPCI_RESET_ADDR    	 BCM4710_EXTIF
++#define BCM94702_CPCI_BOARDID_ADDR  	(BCM4710_EXTIF | 0x4000)
++#define BCM94702_CPCI_DOC_ADDR      	(BCM4710_EXTIF | 0x6000)
++#define BCM94702_DOC_ADDR                BCM94702_CPCI_DOC_ADDR
++#define BCM94702_CPCI_LED_ADDR      	(BCM4710_EXTIF | 0xc000)
++#define BCM94702_CPCI_NVRAM_ADDR    	(BCM4710_EXTIF | 0xe000)
++#define BCM94702_CPCI_NVRAM_SIZE         0x1ff0 /* 8K NVRAM : DS1743/STM48txx*/
++#define BCM94702_CPCI_TOD_REG_BASE       (BCM94702_CPCI_NVRAM_ADDR | 0x1ff0)
 +
-+		if ((mc & CC_T2MC_M1BYP) == 0)
-+			clock /= m1;
-+		if ((mc & CC_T2MC_M2BYP) == 0)
-+			clock /= m2;
-+		if ((mc & CC_T2MC_M3BYP) == 0)
-+			clock /= m3;
++#define LED_REG(x)      \
++ (*(volatile unsigned char *) (KSEG1ADDR(BCM94702_CPCI_LED_ADDR) + (x)))
 +
-+		return(clock);
-+	}
-+}
++/* 
++ * Reset function implemented in PLD.  Read or write should trigger hard reset 
++ */
++#define SYS_HARD_RESET()   \
++    { for (;;) \
++     *( (volatile unsigned char *)\
++      KSEG1ADDR(BCM94702_CPCI_RESET_ADDR) ) = 0x80; \
++    }
 +
-+/* returns the current speed the SB is running at */
-+uint32
-+sb_clock(void *sbh)
-+{
-+	sb_info_t *si;
-+	extifregs_t *eir;
-+	chipcregs_t *cc;
-+	uint32 n, m;
-+	uint idx;
-+	uint32 pll_type, rate;
-+	uint intr_val = 0;
++#endif /* _bcm4710_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmdevs.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmdevs.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmdevs.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmdevs.h	2005-09-16 10:29:18.173592096 +0200
+@@ -0,0 +1,238 @@
++/*
++ * Broadcom device-specific manifest constants.
++ *
++ * $Id$
++ * Copyright 2001-2003, Broadcom Corporation   
++ * All Rights Reserved.   
++ *    
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
++ */
 +
-+	si = SB_INFO(sbh);
-+	idx = si->curidx;
-+	pll_type = PLL_TYPE1;
++#ifndef	_BCMDEVS_H
++#define	_BCMDEVS_H
 +
-+	INTR_OFF(si, intr_val);
 +
-+	/* switch to extif or chipc core */
-+	if ((eir = (extifregs_t *) sb_setcore(sbh, SB_EXTIF, 0))) {
-+		n = R_REG(&eir->clockcontrol_n);
-+		m = R_REG(&eir->clockcontrol_sb);
-+	} else if ((cc = (chipcregs_t *) sb_setcore(sbh, SB_CC, 0))) {
-+		pll_type = R_REG(&cc->capabilities) & CAP_PLL_MASK;
-+		n = R_REG(&cc->clockcontrol_n);
-+		m = R_REG(&cc->clockcontrol_sb);
-+	} else {
-+		INTR_RESTORE(si, intr_val);
-+		return 0;
-+	}
++/* Known PCI vendor Id's */
++#define	VENDOR_EPIGRAM		0xfeda
++#define	VENDOR_BROADCOM		0x14e4
++#define	VENDOR_3COM		0x10b7
++#define	VENDOR_NETGEAR		0x1385
++#define	VENDOR_DIAMOND		0x1092
++#define	VENDOR_DELL		0x1028
++#define	VENDOR_HP		0x0e11
++#define	VENDOR_APPLE		0x106b
 +
-+	/* calculate rate */
-+	rate = sb_clock_rate(pll_type, n, m);
++/* PCI Device Id's */
++#define	BCM4210_DEVICE_ID	0x1072		/* never used */
++#define	BCM4211_DEVICE_ID	0x4211
++#define	BCM4230_DEVICE_ID	0x1086		/* never used */
++#define	BCM4231_DEVICE_ID	0x4231
 +
-+	/* switch back to previous core */
-+	sb_setcoreidx(sbh, idx);
++#define	BCM4410_DEVICE_ID	0x4410		/* bcm44xx family pci iline */
++#define	BCM4430_DEVICE_ID	0x4430		/* bcm44xx family cardbus iline */
++#define	BCM4412_DEVICE_ID	0x4412		/* bcm44xx family pci enet */
++#define	BCM4432_DEVICE_ID	0x4432		/* bcm44xx family cardbus enet */
 +
-+	INTR_RESTORE(si, intr_val);
++#define	BCM3352_DEVICE_ID	0x3352		/* bcm3352 device id */
++#define	BCM3360_DEVICE_ID	0x3360		/* bcm3360 device id */
 +
-+	return rate;
-+}
++#define	EPI41210_DEVICE_ID	0xa0fa		/* bcm4210 */
++#define	EPI41230_DEVICE_ID	0xa10e		/* bcm4230 */
 +
-+/* change logical "focus" to the gpio core for optimized access */
-+void*
-+sb_gpiosetcore(void *sbh)
-+{
-+	sb_info_t *si;
++#define	BCM47XX_ILINE_ID	0x4711		/* 47xx iline20 */
++#define	BCM47XX_V90_ID		0x4712		/* 47xx v90 codec */
++#define	BCM47XX_ENET_ID		0x4713		/* 47xx enet */
++#define	BCM47XX_EXT_ID		0x4714		/* 47xx external i/f */
++#define	BCM47XX_USB_ID		0x4715		/* 47xx usb */
++#define	BCM47XX_USBH_ID		0x4716		/* 47xx usb host */
++#define	BCM47XX_USBD_ID		0x4717		/* 47xx usb device */
++#define	BCM47XX_IPSEC_ID	0x4718		/* 47xx ipsec */
 +
-+	si = SB_INFO(sbh);
++#define	BCM4710_DEVICE_ID	0x4710		/* 4710 primary function 0 */
 +
-+	return (sb_setcoreidx(sbh, si->gpioidx));
-+}
++#define	BCM4610_DEVICE_ID	0x4610		/* 4610 primary function 0 */
++#define	BCM4610_ILINE_ID	0x4611		/* 4610 iline100 */
++#define	BCM4610_V90_ID		0x4612		/* 4610 v90 codec */
++#define	BCM4610_ENET_ID		0x4613		/* 4610 enet */
++#define	BCM4610_EXT_ID		0x4614		/* 4610 external i/f */
++#define	BCM4610_USB_ID		0x4615		/* 4610 usb */
 +
-+/* mask&set gpiocontrol bits */
-+uint32
-+sb_gpiocontrol(void *sbh, uint32 mask, uint32 val)
-+{
-+	sb_info_t *si;
-+	uint regoff;
++#define	BCM4402_DEVICE_ID	0x4402		/* 4402 primary function 0 */
++#define	BCM4402_ENET_ID		0x4402		/* 4402 enet */
++#define	BCM4402_V90_ID		0x4403		/* 4402 v90 codec */
 +
-+	si = SB_INFO(sbh);
-+	regoff = 0;
++#define	BCM4301_DEVICE_ID	0x4301		/* 4301 primary function 0 */
++#define	BCM4301_D11B_ID		0x4301		/* 4301 802.11b */
 +
-+	switch (si->gpioid) {
-+	case SB_CC:
-+		regoff = OFFSETOF(chipcregs_t, gpiocontrol);
-+		break;
++#define	BCM4307_DEVICE_ID	0x4307		/* 4307 primary function 0 */
++#define	BCM4307_V90_ID		0x4305		/* 4307 v90 codec */
++#define	BCM4307_ENET_ID		0x4306		/* 4307 enet */
++#define	BCM4307_D11B_ID		0x4307		/* 4307 802.11b */
 +
-+	case SB_PCI:
-+		regoff = OFFSETOF(sbpciregs_t, gpiocontrol);
-+		break;
++#define	BCM4306_DEVICE_ID	0x4306		/* 4306 chipcommon chipid */
++#define	BCM4306_D11G_ID		0x4320		/* 4306 802.11g */
++#define	BCM4306_D11G_ID2	0x4325		
++#define	BCM4306_D11A_ID		0x4321		/* 4306 802.11a */
++#define	BCM4306_UART_ID		0x4322		/* 4306 uart */
++#define	BCM4306_V90_ID		0x4323		/* 4306 v90 codec */
++#define	BCM4306_D11DUAL_ID	0x4324		/* 4306 dual A+B */
 +
-+	case SB_EXTIF:
-+		return (0);
-+	}
++#define	BCM4309_PKG_ID		1		/* 4309 package id */
 +
-+	return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
-+}
++#define	BCM4303_D11B_ID		0x4303		/* 4303 802.11b */
++#define	BCM4303_PKG_ID		2		/* 4303 package id */
 +
-+/* mask&set gpio output enable bits */
-+uint32
-+sb_gpioouten(void *sbh, uint32 mask, uint32 val)
-+{
-+	sb_info_t *si;
-+	uint regoff;
++#define	BCM4310_DEVICE_ID	0x4310		/* 4310 chipcommon chipid */
++#define	BCM4310_D11B_ID		0x4311		/* 4310 802.11b */
++#define	BCM4310_UART_ID		0x4312		/* 4310 uart */
++#define	BCM4310_ENET_ID		0x4313		/* 4310 enet */
++#define	BCM4310_USB_ID		0x4315		/* 4310 usb */
 +
-+	si = SB_INFO(sbh);
-+	regoff = 0;
++#define	BCM4704_DEVICE_ID	0x4704		/* 4704 chipcommon chipid */
++#define	BCM4704_ENET_ID		0x4706		/* 4704 enet (Use 47XX_ENET_ID instead!) */
 +
-+	switch (si->gpioid) {
-+	case SB_CC:
-+		regoff = OFFSETOF(chipcregs_t, gpioouten);
-+		break;
++#define	BCM4317_DEVICE_ID	0x4317		/* 4317 chip common chipid */
 +
-+	case SB_PCI:
-+		regoff = OFFSETOF(sbpciregs_t, gpioouten);
-+		break;
++#define	BCM4712_DEVICE_ID	0x4712		/* 4712 chipcommon chipid */
++#define	BCM4712_MIPS_ID		0x4720		/* 4712 base devid */
++#define	BCM4712SMALL_PKG_ID	1		/* 200pin 4712 package id */
 +
-+	case SB_EXTIF:
-+		regoff = OFFSETOF(extifregs_t, gpio[0].outen);
-+		break;
-+	}
++#define	SDIOH_FPGA_ID		0x4380		/* sdio host fpga */
 +
-+	return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
-+}
++#define BCM5365_DEVICE_ID       0x5365          /* 5365 chipcommon chipid */
 +
-+/* mask&set gpio output bits */
-+uint32
-+sb_gpioout(void *sbh, uint32 mask, uint32 val)
-+{
-+	sb_info_t *si;
-+	uint regoff;
 +
-+	si = SB_INFO(sbh);
-+	regoff = 0;
++/* PCMCIA vendor Id's */
 +
-+	switch (si->gpioid) {
-+	case SB_CC:
-+		regoff = OFFSETOF(chipcregs_t, gpioout);
-+		break;
++#define	VENDOR_BROADCOM_PCMCIA	0x02d0
 +
-+	case SB_PCI:
-+		regoff = OFFSETOF(sbpciregs_t, gpioout);
-+		break;
++/* SDIO vendor Id's */
++#define	VENDOR_BROADCOM_SDIO	0x00BF
 +
-+	case SB_EXTIF:
-+		regoff = OFFSETOF(extifregs_t, gpio[0].out);
-+		break;
-+	}
 +
-+	return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
-+}
++/* boardflags */
++#define	BFL_BTCOEXIST		0x0001	/* This board implements Bluetooth coexistance */
++#define	BFL_PACTRL		0x0002	/* This board has gpio 9 controlling the PA */
++#define	BFL_AIRLINEMODE		0x0004	/* This board implements gpio13 radio disable indication */
++#define	BFL_ENETSPI		0x0010	/* This board has ephy roboswitch spi */
++#define	BFL_CCKHIPWR		0x0040	/* Can do high-power CCK transmission */
++#define	BFL_ENETADM		0x0080	/* This board has ADMtek switch */
++#define	BFL_ENETVLAN		0x0100	/* This board can do vlan */
 +
-+/* return the current gpioin register value */
-+uint32
-+sb_gpioin(void *sbh)
-+{
-+	sb_info_t *si;
-+	uint regoff;
++/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */
++#define BOARD_GPIO_HWRAD_B	0x010	/* bit 4 is HWRAD input on 4301 */
++#define	BOARD_GPIO_BTC_IN	0x080	/* bit 7 is BT Coexistance Input */
++#define	BOARD_GPIO_BTC_OUT	0x100	/* bit 8 is BT Coexistance Out */
++#define	BOARD_GPIO_PACTRL	0x200	/* bit 9 controls the PA on new 4306 boards */
++#define	PCI_CFG_GPIO_SCS	0x10	/* PCI config space bit 4 for 4306c0 slow clock source */
++#define PCI_CFG_GPIO_HWRAD	0x20	/* PCI config space GPIO 13 for hw radio disable */
++#define PCI_CFG_GPIO_XTAL	0x40	/* PCI config space GPIO 14 for Xtal powerup */
++#define PCI_CFG_GPIO_PLL	0x80	/* PCI config space GPIO 15 for PLL powerdown */
 +
-+	si = SB_INFO(sbh);
-+	regoff = 0;
++/* Bus types */
++#define	SB_BUS			0	/* Silicon Backplane */
++#define	PCI_BUS			1	/* PCI target */
++#define	PCMCIA_BUS		2	/* PCMCIA target */
++#define SDIO_BUS		3	/* SDIO target */
 +
-+	switch (si->gpioid) {
-+	case SB_CC:
-+		regoff = OFFSETOF(chipcregs_t, gpioin);
-+		break;
++/* Reference Board Types */
 +
-+	case SB_PCI:
-+		regoff = OFFSETOF(sbpciregs_t, gpioin);
-+		break;
++#define	BU4710_BOARD		0x0400
++#define	VSIM4710_BOARD		0x0401
++#define	QT4710_BOARD		0x0402
 +
-+	case SB_EXTIF:
-+		regoff = OFFSETOF(extifregs_t, gpioin);
-+		break;
-+	}
++#define	BU4610_BOARD		0x0403
++#define	VSIM4610_BOARD		0x0404
 +
-+	return (sb_corereg(sbh, si->gpioidx, regoff, 0, 0));
-+}
++#define	BU4307_BOARD		0x0405
++#define	BCM94301CB_BOARD	0x0406
++#define	BCM94301PC_BOARD	0x0406		/* Pcmcia 5v card */
++#define	BCM94301MP_BOARD	0x0407
++#define	BCM94307MP_BOARD	0x0408
++#define	BCMAP4307_BOARD		0x0409
 +
-+/* mask&set gpio interrupt polarity bits */
-+uint32
-+sb_gpiointpolarity(void *sbh, uint32 mask, uint32 val)
-+{
-+	sb_info_t *si;
-+	uint regoff;
++#define	BU4309_BOARD		0x040a
++#define	BCM94309CB_BOARD	0x040b
++#define	BCM94309MP_BOARD	0x040c
++#define	BCM4309AP_BOARD		0x040d
 +
-+	si = SB_INFO(sbh);
-+	regoff = 0;
++#define	BCM94302MP_BOARD	0x040e
 +
-+	switch (si->gpioid) {
-+	case SB_CC:
-+		regoff = OFFSETOF(chipcregs_t, gpiointpolarity);
-+		break;
++#define	VSIM4310_BOARD		0x040f
++#define	BU4711_BOARD		0x0410
++#define	BCM94310U_BOARD		0x0411
++#define	BCM94310AP_BOARD	0x0412
++#define	BCM94310MP_BOARD	0x0414
 +
-+	case SB_PCI:
-+		/* pci gpio implementation does not support interrupt polarity */
-+		ASSERT(0);
-+		break;
++#define	BU4306_BOARD		0x0416
++#define	BCM94306CB_BOARD	0x0417
++#define	BCM94306MP_BOARD	0x0418
 +
-+	case SB_EXTIF:
-+		regoff = OFFSETOF(extifregs_t, gpiointpolarity);
-+		break;
-+	}
++#define	BCM94710D_BOARD		0x041a
++#define	BCM94710R1_BOARD	0x041b
++#define	BCM94710R4_BOARD	0x041c
++#define	BCM94710AP_BOARD	0x041d
 +
-+	return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
-+}
 +
-+/* mask&set gpio interrupt mask bits */
-+uint32
-+sb_gpiointmask(void *sbh, uint32 mask, uint32 val)
-+{
-+	sb_info_t *si;
-+	uint regoff;
++#define	BU2050_BOARD		0x041f
 +
-+	si = SB_INFO(sbh);
-+	regoff = 0;
 +
-+	switch (si->gpioid) {
-+	case SB_CC:
-+		regoff = OFFSETOF(chipcregs_t, gpiointmask);
-+		break;
++#define	BCM94309G_BOARD		0x0421
 +
-+	case SB_PCI:
-+		/* pci gpio implementation does not support interrupt mask */
-+		ASSERT(0);
-+		break;
++#define	BCM94301PC3_BOARD	0x0422		/* Pcmcia 3.3v card */
 +
-+	case SB_EXTIF:
-+		regoff = OFFSETOF(extifregs_t, gpiointmask);
-+		break;
-+	}
++#define	BU4704_BOARD		0x0423
++#define	BU4702_BOARD		0x0424
 +
-+	return (sb_corereg(sbh, si->gpioidx, regoff, mask, val));
-+}
++#define	BCM94306PC_BOARD	0x0425		/* pcmcia 3.3v 4306 card */
 +
++#define	BU4317_BOARD		0x0426
 +
-+/*
-+ * Return the slowclock min or max frequency.
-+ * Three sources of SLOW CLOCK:
-+ *	1. On Chip LPO         -     32khz or 160khz
-+ *	2. On Chip Xtal OSC    -     20mhz/4*(divider+1) 
-+ *	3. External PCI clock  -     66mhz/4*(divider+1)
-+ */
-+static uint
-+slowfreq(void *sbh, bool max)
-+{
-+	sb_info_t *si;
-+	chipcregs_t *cc;
-+	uint32 v;
-+	uint div;
 +
-+	si = SB_INFO(sbh);
++#define	BCM94702MN_BOARD	0x0428
 +
-+	ASSERT(sb_coreid(sbh) == SB_CC);
++/* BCM4702 1U CompactPCI Board */
++#define	BCM94702CPCI_BOARD	0x0429
 +
-+	cc = (chipcregs_t*) sb_setcoreidx(sbh, si->curidx);
++/* BCM4702 with BCM95380 VLAN Router */
++#define	BCM95380RR_BOARD	0x042a
 +
-+	/* shouldn't be here unless we've established the chip has dynamic power control */
-+	ASSERT(R_REG(&cc->capabilities) & CAP_PWR_CTL);
++/* cb4306 with SiGe PA */
++#define	BCM94306CBSG_BOARD	0x042b
 +
-+	if (si->ccrev < 6) {
-+		v = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32));
++/* mp4301 with 2050 radio */
++#define	BCM94301MPL_BOARD	0x042c
 +
-+		if (v & PCI_CFG_GPIO_SCS)
-+			return (max? (PCIMAXFREQ/64) : (PCIMINFREQ/64));
-+		else
-+			return (max? (XTALMAXFREQ/32) : (XTALMINFREQ/32));
-+	} else {
-+		v = R_REG(&cc->slow_clk_ctl) & SCC_SS_MASK;
-+		div = 4 * (((R_REG(&cc->slow_clk_ctl) & SCC_CD_MASK) >> SCC_CD_SHF) + 1);
-+		if (v == SCC_SS_LPO)
-+			return (max? LPOMAXFREQ : LPOMINFREQ);
-+		else if (v == SCC_SS_XTAL)
-+			return (max? (XTALMAXFREQ/div) : (XTALMINFREQ/div));
-+		else if (v == SCC_SS_PCI)
-+			return (max? (PCIMAXFREQ/div) : (PCIMINFREQ/div));
-+		else
-+			ASSERT(0);
-+	}
-+	return (0);
-+}
++/* cb4306 with SiGe PA */
++#define	PCSG94306_BOARD		0x042d
 +
-+/* initialize power control delay registers */
-+void
-+sb_pwrctl_init(void *sbh)
-+{
-+	sb_info_t *si;
-+	uint origidx;
-+	chipcregs_t *cc;
-+	uint slowmaxfreq;
-+	uint pll_on_delay, fref_sel_delay;
++/* bu4704 with sdram */
++#define	BU4704SD_BOARD		0x042e
 +
-+	si = SB_INFO(sbh);
++/* Dual 11a/11g Router */
++#define	BCM94704AGR_BOARD	0x042f
 +
-+	if (si->bus == SB_BUS)
-+		return;
++/* 11a-only minipci */
++#define	BCM94308MP_BOARD	0x0430
 +
-+	origidx = si->curidx;
 +
-+	if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL)
-+		return;
 +
-+	if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL))
-+		goto done;
++/* BCM94317 boards */
++#define BCM94317CB_BOARD	0x0440
++#define BCM94317MP_BOARD	0x0441
++#define BCM94317PCMCIA_BOARD	0x0442
++#define BCM94317SDIO_BOARD	0x0443
 +
-+	slowmaxfreq = slowfreq(sbh, TRUE);
-+	pll_on_delay = ((slowmaxfreq * PLL_DELAY) + 999999) / 1000000;
-+	fref_sel_delay = ((slowmaxfreq * FREF_DELAY) + 999999) / 1000000;
++#define BU4712_BOARD		0x0444
 +
-+	W_REG(&cc->pll_on_delay, pll_on_delay);
-+	W_REG(&cc->fref_sel_delay, fref_sel_delay);
++/* BCM4712 boards */
++#define BCM94712AGR_BOARD	0x0445
++#define BCM94712AP_BOARD	0x0446
 +
-+	/* 4317pc does not work with SlowClock less than 5Mhz */
-+	if (si->bus == PCMCIA_BUS)
-+		SET_REG(&cc->slow_clk_ctl, SCC_CD_MASK, (0 << SCC_CD_SHF));
++/* BCM4702 boards */
++#define CT4702AP_BOARD		0x0447
 +
-+done:
-+	sb_setcoreidx(sbh, origidx);
-+}
++#endif /* _BCMDEVS_H */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmendian.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmendian.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmendian.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmendian.h	2005-09-16 10:29:18.173592096 +0200
+@@ -0,0 +1,125 @@
++/*******************************************************************************
++ * $Id$
++ * Copyright 2001-2003, Broadcom Corporation   
++ * All Rights Reserved.   
++ *    
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
++ * local version of endian.h - byte order defines
++ ******************************************************************************/
 +
-+/* return the value suitable for writing to the dot11 core FAST_PWRUP_DELAY register */
-+uint16
-+sb_pwrctl_fast_pwrup_delay(void *sbh)
-+{
-+	sb_info_t *si;
-+	uint origidx;
-+	chipcregs_t *cc;
-+	uint slowminfreq;
-+	uint16 fpdelay;
-+	uint intr_val = 0;
-+
-+	si = SB_INFO(sbh);
-+	fpdelay = 0;
-+	origidx = si->curidx;
-+
-+	if (si->bus == SB_BUS)
-+		goto done;
-+
-+	INTR_OFF(si, intr_val);
-+
-+	if ((cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0)) == NULL)
-+		goto done;
++#ifndef _BCMENDIAN_H_
++#define _BCMENDIAN_H_
 +
-+	if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL))
-+		goto done;
++#include <typedefs.h>
 +
-+	slowminfreq = slowfreq(sbh, FALSE);
-+	fpdelay = (((R_REG(&cc->pll_on_delay) + 2) * 1000000) + (slowminfreq - 1)) / slowminfreq;
++/* Byte swap a 16 bit value */
++#define BCMSWAP16(val) \
++	((uint16)( \
++		(((uint16)(val) & (uint16)0x00ffU) << 8) | \
++		(((uint16)(val) & (uint16)0xff00U) >> 8) ))
++	
++/* Byte swap a 32 bit value */
++#define BCMSWAP32(val) \
++	((uint32)( \
++		(((uint32)(val) & (uint32)0x000000ffUL) << 24) | \
++		(((uint32)(val) & (uint32)0x0000ff00UL) <<  8) | \
++		(((uint32)(val) & (uint32)0x00ff0000UL) >>  8) | \
++		(((uint32)(val) & (uint32)0xff000000UL) >> 24) ))
 +
-+done:
-+	sb_setcoreidx(sbh, origidx);
-+	INTR_RESTORE(si, intr_val);
-+	return (fpdelay);
++static INLINE uint16
++bcmswap16(uint16 val)
++{
++	return BCMSWAP16(val);
 +}
 +
-+/* turn primary xtal and/or pll off/on */
-+int
-+sb_pwrctl_xtal(void *sbh, uint what, bool on)
++static INLINE uint32
++bcmswap32(uint32 val)
 +{
-+	sb_info_t *si;
-+	uint32 in, out, outen;
-+
-+	si = SB_INFO(sbh);
++	return BCMSWAP32(val);
++}
 +
++/* buf	- start of buffer of shorts to swap */
++/* len  - byte length of buffer */
++static INLINE void
++bcmswap16_buf(uint16 *buf, uint len)
++{
++	len = len/2;
 +
-+	if (si->bus == PCMCIA_BUS) {
-+		return (0);
++	while(len--){
++		*buf = bcmswap16(*buf);
++		buf++;
 +	}
++}
 +
-+	if (si->bus != PCI_BUS) 
-+		return (-1);
-+
-+	in = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_IN, sizeof (uint32));
-+	out = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32));
-+	outen = OSL_PCI_READ_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32));
-+
-+	/*
-+	 * We can't actually read the state of the PLLPD so we infer it
-+	 * by the value of XTAL_PU which *is* readable via gpioin.
-+	 */
-+	if (on && (in & PCI_CFG_GPIO_XTAL))
-+		return (0);
++#ifndef hton16
++#ifndef IL_BIGENDIAN
++#define HTON16(i) BCMSWAP16(i)
++#define	hton16(i) bcmswap16(i)
++#define	hton32(i) bcmswap32(i)
++#define	ntoh16(i) bcmswap16(i)
++#define	ntoh32(i) bcmswap32(i)
++#define ltoh16(i) (i)
++#define ltoh32(i) (i)
++#define htol16(i) (i)
++#define htol32(i) (i)
++#else
++#define HTON16(i) (i)
++#define	hton16(i) (i)
++#define	hton32(i) (i)
++#define	ntoh16(i) (i)
++#define	ntoh32(i) (i)
++#define	ltoh16(i) bcmswap16(i)
++#define	ltoh32(i) bcmswap32(i)
++#define htol16(i) bcmswap16(i)
++#define htol32(i) bcmswap32(i)
++#endif
++#endif
 +
-+	if (what & XTAL)
-+		outen |= PCI_CFG_GPIO_XTAL;
-+	if (what & PLL)
-+		outen |= PCI_CFG_GPIO_PLL;
++#ifndef IL_BIGENDIAN
++#define ltoh16_buf(buf, i)
++#define htol16_buf(buf, i)
++#else
++#define ltoh16_buf(buf, i) bcmswap16_buf((uint16*)buf, i)
++#define htol16_buf(buf, i) bcmswap16_buf((uint16*)buf, i)
++#endif
 +
-+	if (on) {
-+		/* turn primary xtal on */
-+		if (what & XTAL) {
-+			out |= PCI_CFG_GPIO_XTAL;
-+			if (what & PLL)
-+				out |= PCI_CFG_GPIO_PLL;
-+			OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out);
-+			OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen);
-+			OSL_DELAY(200);
-+		}
++/*
++* load 16-bit value from unaligned little endian byte array.
++*/
++static INLINE uint16
++ltoh16_ua(uint8 *bytes)
++{
++	return (bytes[1]<<8)+bytes[0];
++}
 +
-+		/* turn pll on */
-+		if (what & PLL) {
-+			out &= ~PCI_CFG_GPIO_PLL;
-+			OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out);
-+			OSL_DELAY(2000);
-+		}
-+	} else {
-+		if (what & XTAL)
-+			out &= ~PCI_CFG_GPIO_XTAL;
-+		if (what & PLL)
-+			out |= PCI_CFG_GPIO_PLL;
-+		OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUT, sizeof (uint32), out);
-+		OSL_PCI_WRITE_CONFIG(si->osh, PCI_GPIO_OUTEN, sizeof (uint32), outen);
-+	}
++/*
++* load 32-bit value from unaligned little endian byte array.
++*/
++static INLINE uint32
++ltoh32_ua(uint8 *bytes)
++{
++	return (bytes[3]<<24)+(bytes[2]<<16)+(bytes[1]<<8)+bytes[0];
++}
 +
-+	return (0);
++/*
++* load 16-bit value from unaligned big(network) endian byte array.
++*/
++static INLINE uint16
++ntoh16_ua(uint8 *bytes)
++{
++	return (bytes[0]<<8)+bytes[1];
 +}
 +
-+/* set dynamic power control mode (forceslow, forcefast, dynamic) */
-+/*   returns true if ignore pll off is set and false if it is not */
-+bool
-+sb_pwrctl_clk(void *sbh, uint mode)
++/*
++* load 32-bit value from unaligned big(network) endian byte array.
++*/
++static INLINE uint32
++ntoh32_ua(uint8 *bytes)
 +{
-+	sb_info_t *si;
-+	uint origidx;
-+	chipcregs_t *cc;
-+	uint32 scc;
-+	bool forcefastclk=FALSE;
-+	uint intr_val = 0;
++	return (bytes[0]<<24)+(bytes[1]<<16)+(bytes[2]<<8)+bytes[3];
++}
 +
-+	si = SB_INFO(sbh);
++#endif /* _BCMENDIAN_H_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenet47xx.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenet47xx.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenet47xx.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenet47xx.h	2005-09-16 10:29:18.174591944 +0200
+@@ -0,0 +1,229 @@
++/*
++ * Hardware-specific definitions for
++ * Broadcom BCM47XX 10/100 Mbps Ethernet cores.
++ *
++ * Copyright 2001-2003, Broadcom Corporation   
++ * All Rights Reserved.   
++ *    
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
++ * $Id$
++ */
 +
-+	/* chipcommon cores prior to rev6 don't support slowclkcontrol */
-+	if (si->ccrev < 6)
-+		return (FALSE);
++#ifndef	_bcmenet_47xx_h_
++#define	_bcmenet_47xx_h_
 +
-+	INTR_OFF(si, intr_val);
++#include <bcmdevs.h>
++#include <hnddma.h>
 +
-+	origidx = si->curidx;
++#define	BCMENET_NFILTERS	64		/* # ethernet address filter entries */
++#define	BCMENET_MCHASHBASE	0x200		/* multicast hash filter base address */
++#define	BCMENET_MCHASHSIZE	256		/* multicast hash filter size in bytes */
++#define	BCMENET_MAX_DMA		4096		/* chip has 12 bits of DMA addressing */
 +
-+	cc = (chipcregs_t*) sb_setcore(sbh, SB_CC, 0);
-+	ASSERT(cc != NULL);
++/* power management event wakeup pattern constants */
++#define	BCMENET_NPMP		4		/* chip supports 4 wakeup patterns */
++#define	BCMENET_PMPBASE		0x400		/* wakeup pattern base address */
++#define	BCMENET_PMPSIZE		0x80		/* 128bytes each pattern */
++#define	BCMENET_PMMBASE		0x600		/* wakeup mask base address */
++#define	BCMENET_PMMSIZE		0x10		/* 128bits each mask */
 +
-+	if (!(R_REG(&cc->capabilities) & CAP_PWR_CTL))
-+		goto done;
++/* cpp contortions to concatenate w/arg prescan */
++#ifndef PAD
++#define	_PADLINE(line)	pad ## line
++#define	_XSTR(line)	_PADLINE(line)
++#define	PAD		_XSTR(__LINE__)
++#endif	/* PAD */
 +
-+	switch (mode) {
-+	case CLK_FAST:	/* force fast (pll) clock */
-+		/* don't forget to force xtal back on before we clear SCC_DYN_XTAL.. */
-+		sb_pwrctl_xtal(sbh, XTAL, ON);
++/* sometimes you just need the enet mib definitions */
++#include <bcmenetmib.h>
 +
-+		SET_REG(&cc->slow_clk_ctl, (SCC_XC | SCC_FS | SCC_IP), SCC_IP);
-+		break;
++/*
++ * Host Interface Registers
++ */
++typedef volatile struct _bcmenettregs {
++	/* Device and Power Control */
++	uint32	devcontrol;
++	uint32	PAD[2];
++	uint32	biststatus;
++	uint32	wakeuplength;
++	uint32	PAD[3];
++	
++	/* Interrupt Control */
++	uint32	intstatus;
++	uint32	intmask;
++	uint32	gptimer;
++	uint32	PAD[23];
 +
-+	case CLK_SLOW:	/* force slow clock */
-+		if ((si->bus == SDIO_BUS) || (si->bus == PCMCIA_BUS))
-+			return (-1);
++	/* Ethernet MAC Address Filtering Control */
++	uint32	PAD[2];
++	uint32	enetftaddr;
++	uint32	enetftdata;
++	uint32	PAD[2];
 +
-+		if (si->ccrev >= 6)
-+			OR_REG(&cc->slow_clk_ctl, SCC_FS);
-+		break;
++	/* Ethernet MAC Control */
++	uint32	emactxmaxburstlen;
++	uint32	emacrxmaxburstlen;
++	uint32	emaccontrol;
++	uint32	emacflowcontrol;
 +
-+	case CLK_DYNAMIC:	/* enable dynamic power control */
-+		scc = R_REG(&cc->slow_clk_ctl);
-+		scc &= ~(SCC_FS | SCC_IP | SCC_XC);
-+		if ((scc & SCC_SS_MASK) != SCC_SS_XTAL)
-+			scc |= SCC_XC;
-+		W_REG(&cc->slow_clk_ctl, scc);
++	uint32	PAD[20];
 +
-+		/* for dynamic control, we have to release our xtal_pu "force on" */
-+		if (scc & SCC_XC)
-+			sb_pwrctl_xtal(sbh, XTAL, OFF);
-+		break;
-+	}
-+	
-+	/* Is the h/w forcing the use of the fast clk */
-+	forcefastclk = (bool)((R_REG(&cc->slow_clk_ctl) & SCC_IP) == SCC_IP);
++	/* DMA Lazy Interrupt Control */
++	uint32	intrecvlazy;
++	uint32	PAD[63];
 +
-+done:
-+	sb_setcoreidx(sbh, origidx);
-+	INTR_RESTORE(si, intr_val);
-+	return (forcefastclk);
-+}
++	/* DMA engine */
++	dmaregs_t	dmaregs;
++	dmafifo_t	dmafifo;
++	uint32	PAD[116];
 +
-+/* register driver interrupt disabling and restoring callback functions */
-+void
-+sb_register_intr_callback(void *sbh, void *intrsoff_fn, void *intrsrestore_fn, void *intr_arg)
-+{
-+	sb_info_t *si;
++	/* EMAC Registers */
++	uint32 rxconfig;
++	uint32 rxmaxlength;
++	uint32 txmaxlength;
++	uint32 PAD;
++	uint32 mdiocontrol;
++	uint32 mdiodata;
++	uint32 emacintmask;
++	uint32 emacintstatus;
++	uint32 camdatalo;
++	uint32 camdatahi;
++	uint32 camcontrol;
++	uint32 enetcontrol;
++	uint32 txcontrol;
++	uint32 txwatermark;
++	uint32 mibcontrol;
++	uint32 PAD[49];
 +
-+	si = SB_INFO(sbh);
-+	si->intr_arg = intr_arg;
-+	si->intrsoff_fn = (sb_intrsoff_t)intrsoff_fn;
-+	si->intrsrestore_fn = (sb_intrsrestore_t)intrsrestore_fn;
-+	/* save current core id.  when this function called, the current core
-+	 * must be the core which provides driver functions(il, et, wl, etc.)
-+	 */
-+	si->dev_coreid = si->coreid[si->curidx];
-+}
++	/* EMAC MIB counters */
++	bcmenetmib_t	mib;
 +
++	uint32	PAD[585];
 +
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcm4710.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcm4710.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcm4710.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcm4710.h	2005-08-28 11:12:20.430859152 +0200
-@@ -0,0 +1,90 @@
-+/*
-+ * BCM4710 address space map and definitions
-+ * Think twice before adding to this file, this is not the kitchen sink
-+ * These definitions are not guaranteed for all 47xx chips, only the 4710
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation   
-+ * All Rights Reserved.   
-+ *    
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
-+ * $Id$
-+ */
++	/* Sonics SiliconBackplane config registers */
++	sbconfig_t	sbconfig;
++} bcmenetregs_t;
 +
-+#ifndef _bcm4710_h_
-+#define _bcm4710_h_
++/* device control */
++#define	DC_PM		((uint32)1 << 7)	/* pattern filtering enable */
++#define	DC_IP		((uint32)1 << 10)	/* internal ephy present (rev >= 1) */
++#define	DC_ER		((uint32)1 << 15)	/* ephy reset */
++#define	DC_MP		((uint32)1 << 16)	/* mii phy mode enable */
++#define	DC_CO		((uint32)1 << 17)	/* mii phy mode: enable clocks */
++#define	DC_PA_MASK	0x7c0000		/* mii phy mode: mdc/mdio phy address */
++#define	DC_PA_SHIFT	18
 +
-+/* Address map */
-+#define BCM4710_SDRAM		0x00000000	/* Physical SDRAM */
-+#define BCM4710_PCI_MEM		0x08000000	/* Host Mode PCI memory access space (64 MB) */
-+#define BCM4710_PCI_CFG		0x0c000000	/* Host Mode PCI configuration space (64 MB) */
-+#define BCM4710_PCI_DMA		0x40000000	/* Client Mode PCI memory access space (1 GB) */
-+#define	BCM4710_SDRAM_SWAPPED	0x10000000	/* Byteswapped Physical SDRAM */
-+#define BCM4710_ENUM		0x18000000	/* Beginning of core enumeration space */
++/* wakeup length */
++#define	WL_P0_MASK	0x7f			/* pattern 0 */
++#define	WL_D0		((uint32)1 << 7)
++#define	WL_P1_MASK	0x7f00			/* pattern 1 */
++#define	WL_P1_SHIFT	8
++#define	WL_D1		((uint32)1 << 15)
++#define	WL_P2_MASK	0x7f0000		/* pattern 2 */
++#define	WL_P2_SHIFT	16
++#define	WL_D2		((uint32)1 << 23)
++#define	WL_P3_MASK	0x7f000000		/* pattern 3 */
++#define	WL_P3_SHIFT	24
++#define	WL_D3		((uint32)1 << 31)
 +
-+/* Core register space */
-+#define BCM4710_REG_SDRAM	0x18000000	/* SDRAM core registers */
-+#define BCM4710_REG_ILINE20	0x18001000	/* InsideLine20 core registers */
-+#define BCM4710_REG_EMAC0	0x18002000	/* Ethernet MAC 0 core registers */
-+#define BCM4710_REG_CODEC	0x18003000	/* Codec core registers */
-+#define BCM4710_REG_USB		0x18004000	/* USB core registers */
-+#define BCM4710_REG_PCI		0x18005000	/* PCI core registers */
-+#define BCM4710_REG_MIPS	0x18006000	/* MIPS core registers */
-+#define BCM4710_REG_EXTIF	0x18007000	/* External Interface core registers */
-+#define BCM4710_REG_EMAC1	0x18008000	/* Ethernet MAC 1 core registers */
++/* intstatus and intmask */
++#define	I_PME		((uint32)1 << 6)	/* power management event */
++#define	I_TO		((uint32)1 << 7)	/* general purpose timeout */
++#define	I_PC		((uint32)1 << 10)	/* descriptor error */
++#define	I_PD		((uint32)1 << 11)	/* data error */
++#define	I_DE		((uint32)1 << 12)	/* descriptor protocol error */
++#define	I_RU		((uint32)1 << 13)	/* receive descriptor underflow */
++#define	I_RO		((uint32)1 << 14)	/* receive fifo overflow */
++#define	I_XU		((uint32)1 << 15)	/* transmit fifo underflow */
++#define	I_RI		((uint32)1 << 16)	/* receive interrupt */
++#define	I_XI		((uint32)1 << 24)	/* transmit interrupt */
++#define	I_EM		((uint32)1 << 26)	/* emac interrupt */
++#define	I_MW		((uint32)1 << 27)	/* mii write */
++#define	I_MR		((uint32)1 << 28)	/* mii read */
 +
-+#define	BCM4710_EXTIF		0x1f000000	/* External Interface base address */
-+#define BCM4710_PCMCIA_MEM	0x1f000000	/* External Interface PCMCIA memory access */
-+#define BCM4710_PCMCIA_IO	0x1f100000	/* PCMCIA I/O access */
-+#define BCM4710_PCMCIA_CONF	0x1f200000	/* PCMCIA configuration */
-+#define BCM4710_PROG		0x1f800000	/* Programable interface */
-+#define BCM4710_FLASH		0x1fc00000	/* Flash */
++/* emaccontrol */
++#define	EMC_CG		((uint32)1 << 0)	/* crc32 generation enable */
++#define	EMC_EP		((uint32)1 << 2)	/* onchip ephy: powerdown (rev >= 1) */
++#define	EMC_ED		((uint32)1 << 3)	/* onchip ephy: energy detected (rev >= 1) */
++#define	EMC_LC_MASK	0xe0			/* onchip ephy: led control (rev >= 1) */
++#define	EMC_LC_SHIFT	5
 +
-+#define	BCM4710_EJTAG		0xff200000	/* MIPS EJTAG space (2M) */
++/* emacflowcontrol */
++#define	EMF_RFH_MASK	0xff			/* rx fifo hi water mark */
++#define	EMF_PG		((uint32)1 << 15)	/* enable pause frame generation */
 +
-+#define	BCM4710_UART		(BCM4710_REG_EXTIF + 0x00000300)
++/* interrupt receive lazy */
++#define	IRL_TO_MASK	0x00ffffff		/* timeout */
++#define	IRL_FC_MASK	0xff000000		/* frame count */
++#define	IRL_FC_SHIFT	24			/* frame count */
 +
-+#define	BCM4710_EUART		(BCM4710_EXTIF + 0x00800000)
-+#define	BCM4710_LED		(BCM4710_EXTIF + 0x00900000)
++/* emac receive config */
++#define	ERC_DB		((uint32)1 << 0)	/* disable broadcast */
++#define	ERC_AM		((uint32)1 << 1)	/* accept all multicast */
++#define	ERC_RDT		((uint32)1 << 2)	/* receive disable while transmitting */
++#define	ERC_PE		((uint32)1 << 3)	/* promiscuous enable */
++#define	ERC_LE		((uint32)1 << 4)	/* loopback enable */
++#define	ERC_FE		((uint32)1 << 5)	/* enable flow control */
++#define	ERC_UF		((uint32)1 << 6)	/* accept unicast flow control frame */
++#define	ERC_RF		((uint32)1 << 7)	/* reject filter */
 +
-+#define	SBFLAG_PCI	0
-+#define	SBFLAG_ENET0	1
-+#define	SBFLAG_ILINE20	2
-+#define	SBFLAG_CODEC	3
-+#define	SBFLAG_USB	4
-+#define	SBFLAG_EXTIF	5
-+#define	SBFLAG_ENET1	6
++/* emac mdio control */
++#define	MC_MF_MASK	0x7f			/* mdc frequency */
++#define	MC_PE		((uint32)1 << 7)	/* mii preamble enable */
 +
-+#ifdef	CONFIG_HWSIM
-+#define	BCM4710_TRACE(trval)        do { *((int *)0xa0000f18) = (trval); } while (0)
-+#else
-+#define	BCM4710_TRACE(trval)
-+#endif
++/* emac mdio data */
++#define	MD_DATA_MASK	0xffff			/* r/w data */
++#define	MD_TA_MASK	0x30000			/* turnaround value */
++#define	MD_TA_SHIFT	16
++#define	MD_TA_VALID	(2 << MD_TA_SHIFT)	/* valid ta */
++#define	MD_RA_MASK	0x7c0000		/* register address */
++#define	MD_RA_SHIFT	18
++#define	MD_PMD_MASK	0xf800000		/* physical media device */
++#define	MD_PMD_SHIFT	23
++#define	MD_OP_MASK	0x30000000		/* opcode */
++#define	MD_OP_SHIFT	28
++#define	MD_OP_WRITE	(1 << MD_OP_SHIFT)	/* write op */
++#define	MD_OP_READ	(2 << MD_OP_SHIFT)	/* read op */
++#define	MD_SB_MASK	0xc0000000		/* start bits */
++#define	MD_SB_SHIFT	30
++#define	MD_SB_START	(0x1 << MD_SB_SHIFT)	/* start of frame */
 +
++/* emac intstatus and intmask */
++#define	EI_MII		((uint32)1 << 0)	/* mii mdio interrupt */
++#define	EI_MIB		((uint32)1 << 1)	/* mib interrupt */
++#define	EI_FLOW		((uint32)1 << 2)	/* flow control interrupt */
 +
-+/* BCM94702 CPCI -ExtIF used for LocalBus devs */
++/* emac cam data high */
++#define	CD_V		((uint32)1 << 16)	/* valid bit */
 +
-+#define BCM94702_CPCI_RESET_ADDR    	 BCM4710_EXTIF
-+#define BCM94702_CPCI_BOARDID_ADDR  	(BCM4710_EXTIF | 0x4000)
-+#define BCM94702_CPCI_DOC_ADDR      	(BCM4710_EXTIF | 0x6000)
-+#define BCM94702_DOC_ADDR                BCM94702_CPCI_DOC_ADDR
-+#define BCM94702_CPCI_LED_ADDR      	(BCM4710_EXTIF | 0xc000)
-+#define BCM94702_CPCI_NVRAM_ADDR    	(BCM4710_EXTIF | 0xe000)
-+#define BCM94702_CPCI_NVRAM_SIZE         0x1ff0 /* 8K NVRAM : DS1743/STM48txx*/
-+#define BCM94702_CPCI_TOD_REG_BASE       (BCM94702_CPCI_NVRAM_ADDR | 0x1ff0)
++/* emac cam control */
++#define	CC_CE		((uint32)1 << 0)	/* cam enable */
++#define	CC_MS		((uint32)1 << 1)	/* mask select */
++#define	CC_RD		((uint32)1 << 2)	/* read */
++#define	CC_WR		((uint32)1 << 3)	/* write */
++#define	CC_INDEX_MASK	0x3f0000		/* index */
++#define	CC_INDEX_SHIFT	16
++#define	CC_CB		((uint32)1 << 31)	/* cam busy */
 +
-+#define LED_REG(x)      \
-+ (*(volatile unsigned char *) (KSEG1ADDR(BCM94702_CPCI_LED_ADDR) + (x)))
++/* emac ethernet control */
++#define	EC_EE		((uint32)1 << 0)	/* emac enable */
++#define	EC_ED		((uint32)1 << 1)	/* emac disable */
++#define	EC_ES		((uint32)1 << 2)	/* emac soft reset */
++#define	EC_EP		((uint32)1 << 3)	/* external phy select */
 +
-+/* 
-+ * Reset function implemented in PLD.  Read or write should trigger hard reset 
-+ */
-+#define SYS_HARD_RESET()   \
-+    { for (;;) \
-+     *( (volatile unsigned char *)\
-+      KSEG1ADDR(BCM94702_CPCI_RESET_ADDR) ) = 0x80; \
-+    }
++/* emac transmit control */
++#define	EXC_FD		((uint32)1 << 0)	/* full duplex */
++#define	EXC_FM		((uint32)1 << 1)	/* flowmode */
++#define	EXC_SB		((uint32)1 << 2)	/* single backoff enable */
++#define	EXC_SS		((uint32)1 << 3)	/* small slottime */
 +
-+#endif /* _bcm4710_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmdevs.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmdevs.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmdevs.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmdevs.h	2005-08-28 11:12:20.431859000 +0200
-@@ -0,0 +1,238 @@
++/* emac mib control */
++#define	EMC_RZ		((uint32)1 << 0)	/* autoclear on read */
++
++/* sometimes you just need the enet rxheader definitions */
++#include <bcmenetrxh.h>
++
++#endif	/* _bcmenet_47xx_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenetmib.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenetmib.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenetmib.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenetmib.h	2005-09-16 10:29:18.174591944 +0200
+@@ -0,0 +1,81 @@
 +/*
-+ * Broadcom device-specific manifest constants.
-+ *
-+ * $Id$
++ * Hardware-specific MIB definition for
++ * Broadcom Home Networking Division
++ * BCM44XX and BCM47XX 10/100 Mbps Ethernet cores.
++ * 
 + * Copyright 2001-2003, Broadcom Corporation   
 + * All Rights Reserved.   
 + *    
@@ -7832,239 +6757,432 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmdevs.h linux-2.6.12.5-brc
 + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
 + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
 + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
++ * $Id$
 + */
 +
-+#ifndef	_BCMDEVS_H
-+#define	_BCMDEVS_H
-+
-+
-+/* Known PCI vendor Id's */
-+#define	VENDOR_EPIGRAM		0xfeda
-+#define	VENDOR_BROADCOM		0x14e4
-+#define	VENDOR_3COM		0x10b7
-+#define	VENDOR_NETGEAR		0x1385
-+#define	VENDOR_DIAMOND		0x1092
-+#define	VENDOR_DELL		0x1028
-+#define	VENDOR_HP		0x0e11
-+#define	VENDOR_APPLE		0x106b
++#ifndef _bcmenetmib_h_
++#define _bcmenetmib_h_
 +
-+/* PCI Device Id's */
-+#define	BCM4210_DEVICE_ID	0x1072		/* never used */
-+#define	BCM4211_DEVICE_ID	0x4211
-+#define	BCM4230_DEVICE_ID	0x1086		/* never used */
-+#define	BCM4231_DEVICE_ID	0x4231
++/* cpp contortions to concatenate w/arg prescan */
++#ifndef PAD
++#define	_PADLINE(line)	pad ## line
++#define	_XSTR(line)	_PADLINE(line)
++#define	PAD		_XSTR(__LINE__)
++#endif	/* PAD */
 +
-+#define	BCM4410_DEVICE_ID	0x4410		/* bcm44xx family pci iline */
-+#define	BCM4430_DEVICE_ID	0x4430		/* bcm44xx family cardbus iline */
-+#define	BCM4412_DEVICE_ID	0x4412		/* bcm44xx family pci enet */
-+#define	BCM4432_DEVICE_ID	0x4432		/* bcm44xx family cardbus enet */
++/*
++ * EMAC MIB Registers
++ */
++typedef volatile struct {
++	uint32 tx_good_octets;
++	uint32 tx_good_pkts;
++	uint32 tx_octets;
++	uint32 tx_pkts;
++	uint32 tx_broadcast_pkts;
++	uint32 tx_multicast_pkts;
++	uint32 tx_len_64;
++	uint32 tx_len_65_to_127;
++	uint32 tx_len_128_to_255;
++	uint32 tx_len_256_to_511;
++	uint32 tx_len_512_to_1023;
++	uint32 tx_len_1024_to_max;
++	uint32 tx_jabber_pkts;
++	uint32 tx_oversize_pkts;
++	uint32 tx_fragment_pkts;
++	uint32 tx_underruns;
++	uint32 tx_total_cols;
++	uint32 tx_single_cols;
++	uint32 tx_multiple_cols;
++	uint32 tx_excessive_cols;
++	uint32 tx_late_cols;
++	uint32 tx_defered;
++	uint32 tx_carrier_lost;
++	uint32 tx_pause_pkts;
++	uint32 PAD[8];
 +
-+#define	BCM3352_DEVICE_ID	0x3352		/* bcm3352 device id */
-+#define	BCM3360_DEVICE_ID	0x3360		/* bcm3360 device id */
++	uint32 rx_good_octets;
++	uint32 rx_good_pkts;
++	uint32 rx_octets;
++	uint32 rx_pkts;
++	uint32 rx_broadcast_pkts;
++	uint32 rx_multicast_pkts;
++	uint32 rx_len_64;
++	uint32 rx_len_65_to_127;
++	uint32 rx_len_128_to_255;
++	uint32 rx_len_256_to_511;
++	uint32 rx_len_512_to_1023;
++	uint32 rx_len_1024_to_max;
++	uint32 rx_jabber_pkts;
++	uint32 rx_oversize_pkts;
++	uint32 rx_fragment_pkts;
++	uint32 rx_missed_pkts;
++	uint32 rx_crc_align_errs;
++	uint32 rx_undersize;
++	uint32 rx_crc_errs;
++	uint32 rx_align_errs;
++	uint32 rx_symbol_errs;
++	uint32 rx_pause_pkts;
++	uint32 rx_nonpause_pkts;
++} bcmenetmib_t;
 +
-+#define	EPI41210_DEVICE_ID	0xa0fa		/* bcm4210 */
-+#define	EPI41230_DEVICE_ID	0xa10e		/* bcm4230 */
++#endif	/* _bcmenetmib_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenetrxh.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenetrxh.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenetrxh.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenetrxh.h	2005-09-16 10:29:18.183590576 +0200
+@@ -0,0 +1,43 @@
++/*
++ * Hardware-specific Receive Data Header for the
++ * Broadcom Home Networking Division
++ * BCM44XX and BCM47XX 10/100 Mbps Ethernet cores.
++ *
++ * Copyright 2001-2003, Broadcom Corporation   
++ * All Rights Reserved.   
++ *    
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
++ * $Id$
++ */
 +
-+#define	BCM47XX_ILINE_ID	0x4711		/* 47xx iline20 */
-+#define	BCM47XX_V90_ID		0x4712		/* 47xx v90 codec */
-+#define	BCM47XX_ENET_ID		0x4713		/* 47xx enet */
-+#define	BCM47XX_EXT_ID		0x4714		/* 47xx external i/f */
-+#define	BCM47XX_USB_ID		0x4715		/* 47xx usb */
-+#define	BCM47XX_USBH_ID		0x4716		/* 47xx usb host */
-+#define	BCM47XX_USBD_ID		0x4717		/* 47xx usb device */
-+#define	BCM47XX_IPSEC_ID	0x4718		/* 47xx ipsec */
++#ifndef _bcmenetrxh_h_
++#define	_bcmenetrxh_h_
 +
-+#define	BCM4710_DEVICE_ID	0x4710		/* 4710 primary function 0 */
++/*
++ * The Ethernet MAC core returns an 8-byte Receive Frame Data Header
++ * with every frame consisting of
++ * 16bits of frame length, followed by
++ * 16bits of EMAC rx descriptor info, followed by 32bits of undefined.
++ */
++typedef volatile struct {
++	uint16	len;
++	uint16	flags;
++	uint16	pad[12];
++} bcmenetrxh_t;
 +
-+#define	BCM4610_DEVICE_ID	0x4610		/* 4610 primary function 0 */
-+#define	BCM4610_ILINE_ID	0x4611		/* 4610 iline100 */
-+#define	BCM4610_V90_ID		0x4612		/* 4610 v90 codec */
-+#define	BCM4610_ENET_ID		0x4613		/* 4610 enet */
-+#define	BCM4610_EXT_ID		0x4614		/* 4610 external i/f */
-+#define	BCM4610_USB_ID		0x4615		/* 4610 usb */
++#define	RXHDR_LEN	28
 +
-+#define	BCM4402_DEVICE_ID	0x4402		/* 4402 primary function 0 */
-+#define	BCM4402_ENET_ID		0x4402		/* 4402 enet */
-+#define	BCM4402_V90_ID		0x4403		/* 4402 v90 codec */
++#define	RXF_L		((uint16)1 << 11)	/* last buffer in a frame */
++#define	RXF_MISS	((uint16)1 << 7)	/* received due to promisc mode */
++#define	RXF_BRDCAST	((uint16)1 << 6)	/* dest is broadcast address */
++#define	RXF_MULT	((uint16)1 << 5)	/* dest is multicast address */
++#define	RXF_LG		((uint16)1 << 4)	/* frame length > rxmaxlength */
++#define	RXF_NO		((uint16)1 << 3)	/* odd number of nibbles */
++#define	RXF_RXER	((uint16)1 << 2)	/* receive symbol error */
++#define	RXF_CRC		((uint16)1 << 1)	/* crc error */
++#define	RXF_OV		((uint16)1 << 0)	/* fifo overflow */
 +
-+#define	BCM4301_DEVICE_ID	0x4301		/* 4301 primary function 0 */
-+#define	BCM4301_D11B_ID		0x4301		/* 4301 802.11b */
++#endif	/* _bcmenetrxh_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmnvram.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmnvram.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmnvram.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmnvram.h	2005-09-16 10:29:18.184590424 +0200
+@@ -0,0 +1,131 @@
++/*
++ * NVRAM variable manipulation
++ *
++ * $Copyright Open Broadcom Corporation$
++ *
++ * $Id: bcmnvram.h,v 1.1.1.1 2004/01/21 03:50:44 gigis Exp $
++ */
 +
-+#define	BCM4307_DEVICE_ID	0x4307		/* 4307 primary function 0 */
-+#define	BCM4307_V90_ID		0x4305		/* 4307 v90 codec */
-+#define	BCM4307_ENET_ID		0x4306		/* 4307 enet */
-+#define	BCM4307_D11B_ID		0x4307		/* 4307 802.11b */
++#ifndef _bcmnvram_h_
++#define _bcmnvram_h_
 +
-+#define	BCM4306_DEVICE_ID	0x4306		/* 4306 chipcommon chipid */
-+#define	BCM4306_D11G_ID		0x4320		/* 4306 802.11g */
-+#define	BCM4306_D11G_ID2	0x4325		
-+#define	BCM4306_D11A_ID		0x4321		/* 4306 802.11a */
-+#define	BCM4306_UART_ID		0x4322		/* 4306 uart */
-+#define	BCM4306_V90_ID		0x4323		/* 4306 v90 codec */
-+#define	BCM4306_D11DUAL_ID	0x4324		/* 4306 dual A+B */
++#ifndef _LANGUAGE_ASSEMBLY
 +
-+#define	BCM4309_PKG_ID		1		/* 4309 package id */
++#include <typedefs.h>
 +
-+#define	BCM4303_D11B_ID		0x4303		/* 4303 802.11b */
-+#define	BCM4303_PKG_ID		2		/* 4303 package id */
++struct nvram_header {
++	uint32 magic;
++	uint32 len;
++	uint32 crc_ver_init;	/* 0:7 crc, 8:15 ver, 16:27 init, mem. test 28, 29-31 reserved */
++	uint32 config_refresh;	/* 0:15 config, 16:31 refresh */
++	uint32 config_ncdl;	/* ncdl values for memc */
++};
 +
-+#define	BCM4310_DEVICE_ID	0x4310		/* 4310 chipcommon chipid */
-+#define	BCM4310_D11B_ID		0x4311		/* 4310 802.11b */
-+#define	BCM4310_UART_ID		0x4312		/* 4310 uart */
-+#define	BCM4310_ENET_ID		0x4313		/* 4310 enet */
-+#define	BCM4310_USB_ID		0x4315		/* 4310 usb */
++struct nvram_tuple {
++	char *name;
++	char *value;
++	struct nvram_tuple *next;
++};
 +
-+#define	BCM4704_DEVICE_ID	0x4704		/* 4704 chipcommon chipid */
-+#define	BCM4704_ENET_ID		0x4706		/* 4704 enet (Use 47XX_ENET_ID instead!) */
++/*
++ * Initialize NVRAM access. May be unnecessary or undefined on certain
++ * platforms.
++ */
++extern int nvram_init(void *sbh);
 +
-+#define	BCM4317_DEVICE_ID	0x4317		/* 4317 chip common chipid */
++/*
++ * Disable NVRAM access. May be unnecessary or undefined on certain
++ * platforms.
++ */
++extern void nvram_exit(void);
 +
-+#define	BCM4712_DEVICE_ID	0x4712		/* 4712 chipcommon chipid */
-+#define	BCM4712_MIPS_ID		0x4720		/* 4712 base devid */
-+#define	BCM4712SMALL_PKG_ID	1		/* 200pin 4712 package id */
++/*
++ * Get the value of an NVRAM variable. The pointer returned may be
++ * invalid after a set.
++ * @param	name	name of variable to get
++ * @return	value of variable or NULL if undefined
++ */
++extern char * nvram_get(const char *name);
 +
-+#define	SDIOH_FPGA_ID		0x4380		/* sdio host fpga */
++/* 
++ * Get the value of an NVRAM variable.
++ * @param	name	name of variable to get
++ * @return	value of variable or NUL if undefined
++ */
++#define nvram_safe_get(name) (nvram_get(name) ? : "")
 +
-+#define BCM5365_DEVICE_ID       0x5365          /* 5365 chipcommon chipid */
++/*
++ * Match an NVRAM variable.
++ * @param	name	name of variable to match
++ * @param	match	value to compare against value of variable
++ * @return	TRUE if variable is defined and its value is string equal
++ *		to match or FALSE otherwise
++ */
++static INLINE int
++nvram_match(char *name, char *match) {
++	const char *value = nvram_get(name);
++	return (value && !strcmp(value, match));
++}
 +
++/*
++ * Inversely match an NVRAM variable.
++ * @param	name	name of variable to match
++ * @param	match	value to compare against value of variable
++ * @return	TRUE if variable is defined and its value is not string
++ *		equal to invmatch or FALSE otherwise
++ */
++static INLINE int
++nvram_invmatch(char *name, char *invmatch) {
++	const char *value = nvram_get(name);
++	return (value && strcmp(value, invmatch));
++}
 +
-+/* PCMCIA vendor Id's */
-+
-+#define	VENDOR_BROADCOM_PCMCIA	0x02d0
++/*
++ * Set the value of an NVRAM variable. The name and value strings are
++ * copied into private storage. Pointers to previously set values
++ * may become invalid. The new value may be immediately
++ * retrieved but will not be permanently stored until a commit.
++ * @param	name	name of variable to set
++ * @param	value	value of variable
++ * @return	0 on success and errno on failure
++ */
++extern int nvram_set(const char *name, const char *value);
 +
-+/* SDIO vendor Id's */
-+#define	VENDOR_BROADCOM_SDIO	0x00BF
++/*
++ * Unset an NVRAM variable. Pointers to previously set values
++ * remain valid until a set.
++ * @param	name	name of variable to unset
++ * @return	0 on success and errno on failure
++ * NOTE: use nvram_commit to commit this change to flash.
++ */
++extern int nvram_unset(const char *name);
 +
++/*
++ * Commit NVRAM variables to permanent storage. All pointers to values
++ * may be invalid after a commit.
++ * NVRAM values are undefined after a commit.
++ * @return	0 on success and errno on failure
++ */
++extern int nvram_commit(void);
 +
-+/* boardflags */
-+#define	BFL_BTCOEXIST		0x0001	/* This board implements Bluetooth coexistance */
-+#define	BFL_PACTRL		0x0002	/* This board has gpio 9 controlling the PA */
-+#define	BFL_AIRLINEMODE		0x0004	/* This board implements gpio13 radio disable indication */
-+#define	BFL_ENETSPI		0x0010	/* This board has ephy roboswitch spi */
-+#define	BFL_CCKHIPWR		0x0040	/* Can do high-power CCK transmission */
-+#define	BFL_ENETADM		0x0080	/* This board has ADMtek switch */
-+#define	BFL_ENETVLAN		0x0100	/* This board can do vlan */
++/*
++ * Get all NVRAM variables (format name=value\0 ... \0\0).
++ * @param	buf	buffer to store variables
++ * @param	count	size of buffer in bytes
++ * @return	0 on success and errno on failure
++ */
++extern int nvram_getall(char *buf, int count);
 +
-+/* board specific GPIO assignment, gpio 0-3 are also customer-configurable led */
-+#define BOARD_GPIO_HWRAD_B	0x010	/* bit 4 is HWRAD input on 4301 */
-+#define	BOARD_GPIO_BTC_IN	0x080	/* bit 7 is BT Coexistance Input */
-+#define	BOARD_GPIO_BTC_OUT	0x100	/* bit 8 is BT Coexistance Out */
-+#define	BOARD_GPIO_PACTRL	0x200	/* bit 9 controls the PA on new 4306 boards */
-+#define	PCI_CFG_GPIO_SCS	0x10	/* PCI config space bit 4 for 4306c0 slow clock source */
-+#define PCI_CFG_GPIO_HWRAD	0x20	/* PCI config space GPIO 13 for hw radio disable */
-+#define PCI_CFG_GPIO_XTAL	0x40	/* PCI config space GPIO 14 for Xtal powerup */
-+#define PCI_CFG_GPIO_PLL	0x80	/* PCI config space GPIO 15 for PLL powerdown */
++extern int kernel_write(unsigned char *buffer, int offset, int length);
 +
-+/* Bus types */
-+#define	SB_BUS			0	/* Silicon Backplane */
-+#define	PCI_BUS			1	/* PCI target */
-+#define	PCMCIA_BUS		2	/* PCMCIA target */
-+#define SDIO_BUS		3	/* SDIO target */
++#endif /* _LANGUAGE_ASSEMBLY */
 +
-+/* Reference Board Types */
++#define NVRAM_MAGIC		0x48534C46	/* 'FLSH' */
++#define NVRAM_VERSION		1
++#define NVRAM_HEADER_SIZE	20
++#define NVRAM_LOC_GAP		0x100000
++#define NVRAM_SPACE		0x2000
++#define NVRAM_FIRST_LOC		(0xbfd00000 - NVRAM_SPACE)
++#define NVRAM_LAST_LOC		(0xc0000000 - NVRAM_SPACE)
 +
-+#define	BU4710_BOARD		0x0400
-+#define	VSIM4710_BOARD		0x0401
-+#define	QT4710_BOARD		0x0402
++#endif /* _bcmnvram_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmsrom.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmsrom.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmsrom.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmsrom.h	2005-09-16 10:29:18.184590424 +0200
+@@ -0,0 +1,24 @@
++/*
++ * Misc useful routines to access NIC srom
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ * 
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id$
++ */
 +
-+#define	BU4610_BOARD		0x0403
-+#define	VSIM4610_BOARD		0x0404
++#ifndef	_bcmsrom_h_
++#define	_bcmsrom_h_
 +
-+#define	BU4307_BOARD		0x0405
-+#define	BCM94301CB_BOARD	0x0406
-+#define	BCM94301PC_BOARD	0x0406		/* Pcmcia 5v card */
-+#define	BCM94301MP_BOARD	0x0407
-+#define	BCM94307MP_BOARD	0x0408
-+#define	BCMAP4307_BOARD		0x0409
++extern int srom_var_init(uint bus, void *curmap, void *osh, char **vars, int *count);
 +
-+#define	BU4309_BOARD		0x040a
-+#define	BCM94309CB_BOARD	0x040b
-+#define	BCM94309MP_BOARD	0x040c
-+#define	BCM4309AP_BOARD		0x040d
++extern int srom_read(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf);
++extern int srom_write(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf);
++extern int srom_parsecis(uint8 *cis, char **vars, int *count);
++	   
++#endif	/* _bcmsrom_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmutils.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmutils.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmutils.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmutils.h	2005-09-16 10:29:18.184590424 +0200
+@@ -0,0 +1,136 @@
++/*
++ * Misc useful os-independent macros and functions.
++ *
++ * Copyright 2001-2003, Broadcom Corporation   
++ * All Rights Reserved.   
++ *    
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
++ * $Id$
++ */
 +
-+#define	BCM94302MP_BOARD	0x040e
++#ifndef	_bcmutils_h_
++#define	_bcmutils_h_
 +
-+#define	VSIM4310_BOARD		0x040f
-+#define	BU4711_BOARD		0x0410
-+#define	BCM94310U_BOARD		0x0411
-+#define	BCM94310AP_BOARD	0x0412
-+#define	BCM94310MP_BOARD	0x0414
++#ifndef MIN
++#define	MIN(a, b)		(((a)<(b))?(a):(b))
++#endif
 +
-+#define	BU4306_BOARD		0x0416
-+#define	BCM94306CB_BOARD	0x0417
-+#define	BCM94306MP_BOARD	0x0418
++#ifndef MAX
++#define	MAX(a, b)		(((a)>(b))?(a):(b))
++#endif
 +
-+#define	BCM94710D_BOARD		0x041a
-+#define	BCM94710R1_BOARD	0x041b
-+#define	BCM94710R4_BOARD	0x041c
-+#define	BCM94710AP_BOARD	0x041d
++#define CEIL(x, y)		(((x) + ((y)-1)) / (y))
++#define	ROUNDUP(x, y)		((((ulong)(x)+((y)-1))/(y))*(y))
++#define	ISALIGNED(a, x)		(((uint)(a) & ((x)-1)) == 0)
++#define	ISPOWEROF2(x)		((((x)-1)&(x))==0)
++#define	OFFSETOF(type, member)	((uint) &((type *)0)->member)
++#define ARRAYSIZE(a)		(sizeof(a)/sizeof(a[0]))
 +
++/* bit map related macros */
++#ifndef setbit
++#define	NBBY	8	/* 8 bits per byte */
++#define	setbit(a,i)	((a)[(i)/NBBY] |= 1<<((i)%NBBY))
++#define	clrbit(a,i)	((a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
++#define	isset(a,i)	((a)[(i)/NBBY] & (1<<((i)%NBBY)))
++#define	isclr(a,i)	(((a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
++#endif
 +
-+#define	BU2050_BOARD		0x041f
++#define	NBITS(type)	(sizeof (type) * 8)
 +
++#define _BCM_U	0x01	/* upper */
++#define _BCM_L	0x02	/* lower */
++#define _BCM_D	0x04	/* digit */
++#define _BCM_C	0x08	/* cntrl */
++#define _BCM_P	0x10	/* punct */
++#define _BCM_S	0x20	/* white space (space/lf/tab) */
++#define _BCM_X	0x40	/* hex digit */
++#define _BCM_SP	0x80	/* hard space (0x20) */
 +
-+#define	BCM94309G_BOARD		0x0421
++extern unsigned char bcm_ctype[];
++#define bcm_ismask(x) (bcm_ctype[(int)(unsigned char)(x)])
 +
-+#define	BCM94301PC3_BOARD	0x0422		/* Pcmcia 3.3v card */
++#define bcm_isalnum(c)	((bcm_ismask(c)&(_BCM_U|_BCM_L|_BCM_D)) != 0)
++#define bcm_isalpha(c)	((bcm_ismask(c)&(_BCM_U|_BCM_L)) != 0)
++#define bcm_iscntrl(c)	((bcm_ismask(c)&(_BCM_C)) != 0)
++#define bcm_isdigit(c)	((bcm_ismask(c)&(_BCM_D)) != 0)
++#define bcm_isgraph(c)	((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D)) != 0)
++#define bcm_islower(c)	((bcm_ismask(c)&(_BCM_L)) != 0)
++#define bcm_isprint(c)	((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D|_BCM_SP)) != 0)
++#define bcm_ispunct(c)	((bcm_ismask(c)&(_BCM_P)) != 0)
++#define bcm_isspace(c)	((bcm_ismask(c)&(_BCM_S)) != 0)
++#define bcm_isupper(c)	((bcm_ismask(c)&(_BCM_U)) != 0)
++#define bcm_isxdigit(c)	((bcm_ismask(c)&(_BCM_D|_BCM_X)) != 0)
 +
-+#define	BU4704_BOARD		0x0423
-+#define	BU4702_BOARD		0x0424
++/*
++ * Spin at most 'us' microseconds while 'exp' is true.
++ * Caller should explicitly test 'exp' when this completes
++ * and take appropriate error action if 'exp' is still true.
++ */
++#define SPINWAIT(exp, us) { \
++	uint countdown = (us) + 9; \
++	while ((exp) && (countdown >= 10)) {\
++		OSL_DELAY(10); \
++		countdown -= 10; \
++	} \
++}
 +
-+#define	BCM94306PC_BOARD	0x0425		/* pcmcia 3.3v 4306 card */
++/* generic osl packet queue */
++struct pktq {
++	void *head;
++	void *tail;
++	uint  len;
++	uint  maxlen; 
++};
++#define DEFAULT_QLEN	128
 +
-+#define	BU4317_BOARD		0x0426
++#define	pktq_len(q)		((q)->len)
++#define	pktq_avail(q)	((q)->maxlen - (q)->len)
++#define	pktq_head(q)	((q)->head)
++#define	pktq_full(q)	((q)->len >= (q)->maxlen)
 +
++/* crc defines */
++#define CRC8_INIT_VALUE  0xff		/* Initial CRC8 checksum value */
++#define CRC8_GOOD_VALUE  0x9f		/* Good final CRC8 checksum value */
++#define CRC16_INIT_VALUE 0xffff		/* Initial CRC16 checksum value */
++#define CRC16_GOOD_VALUE 0xf0b8		/* Good final CRC16 checksum value */
++#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
++#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */
 +
-+#define	BCM94702MN_BOARD	0x0428
++/* tag_ID/length/value_buffer tuple */
++typedef struct bcm_tlv {
++	uint8	id;
++	uint8	len;
++	uint8	data[1];
++} bcm_tlv_t;
 +
-+/* BCM4702 1U CompactPCI Board */
-+#define	BCM94702CPCI_BOARD	0x0429
++/* externs */
++extern uint bcm_atoi(char *s);
++extern uchar bcm_toupper(uchar c);
++extern ulong bcm_strtoul(char *cp, char **endp, uint base);
++extern void deadbeef(char *p, uint len);
++extern void prhex(char *msg, uchar *buf, uint len);
++extern void prpkt(char *msg, void *drv, void *p0);
++extern uint pktcopy(void *drv, void *p, uint offset, int len, uchar *buf);
++extern uint pkttotlen(void *drv, void *);
++extern uchar *bcm_ether_ntoa(char *ea, char *buf);
++extern int bcm_ether_atoe(char *p, char *ea);
++extern void bcm_mdelay(uint ms);
++extern char *getvar(char *vars, char *name);
++extern int getintvar(char *vars, char *name);
 +
-+/* BCM4702 with BCM95380 VLAN Router */
-+#define	BCM95380RR_BOARD	0x042a
-+
-+/* cb4306 with SiGe PA */
-+#define	BCM94306CBSG_BOARD	0x042b
-+
-+/* mp4301 with 2050 radio */
-+#define	BCM94301MPL_BOARD	0x042c
-+
-+/* cb4306 with SiGe PA */
-+#define	PCSG94306_BOARD		0x042d
-+
-+/* bu4704 with sdram */
-+#define	BU4704SD_BOARD		0x042e
-+
-+/* Dual 11a/11g Router */
-+#define	BCM94704AGR_BOARD	0x042f
-+
-+/* 11a-only minipci */
-+#define	BCM94308MP_BOARD	0x0430
-+
-+
-+
-+/* BCM94317 boards */
-+#define BCM94317CB_BOARD	0x0440
-+#define BCM94317MP_BOARD	0x0441
-+#define BCM94317PCMCIA_BOARD	0x0442
-+#define BCM94317SDIO_BOARD	0x0443
-+
-+#define BU4712_BOARD		0x0444
-+
-+/* BCM4712 boards */
-+#define BCM94712AGR_BOARD	0x0445
-+#define BCM94712AP_BOARD	0x0446
++extern uint8 crc8(uint8 *p, uint nbytes, uint8 crc);
++extern uint16 crc16(uint8 *p, uint nbytes, uint16 crc);
++extern uint32 crc32(uint8 *p, uint nbytes, uint32 crc);
++extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, uint key);
++extern bcm_tlv_t *bcm_parse_ordered_tlvs(void *buf, int buflen, uint key);
++extern void pktqinit(struct pktq *q, int maxlen);
++extern void pktenq(struct pktq *q, void *p, bool lifo);
++extern void *pktdeq(struct pktq *q);
 +
-+/* BCM4702 boards */
-+#define CT4702AP_BOARD		0x0447
++#define	bcmlog(fmt, a1, a2)
++#define	bcmdumplog(buf, size)	*buf = '\0'
 +
-+#endif /* _BCMDEVS_H */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmendian.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmendian.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmendian.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmendian.h	2005-08-28 11:12:20.431859000 +0200
-@@ -0,0 +1,125 @@
-+/*******************************************************************************
-+ * $Id$
++#endif	/* _bcmutils_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bitfuncs.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bitfuncs.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/bitfuncs.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bitfuncs.h	2005-09-16 10:29:18.185590272 +0200
+@@ -0,0 +1,85 @@
++/*
++ * bit manipulation utility functions
++ *
 + * Copyright 2001-2003, Broadcom Corporation   
 + * All Rights Reserved.   
 + *    
@@ -8072,448 +7190,235 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmendian.h linux-2.6.12.5-b
 + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
 + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
 + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
-+ * local version of endian.h - byte order defines
-+ ******************************************************************************/
++ * $Id$
++ */
 +
-+#ifndef _BCMENDIAN_H_
-+#define _BCMENDIAN_H_
++#ifndef _BITFUNCS_H
++#define _BITFUNCS_H
 +
 +#include <typedefs.h>
 +
-+/* Byte swap a 16 bit value */
-+#define BCMSWAP16(val) \
-+	((uint16)( \
-+		(((uint16)(val) & (uint16)0x00ffU) << 8) | \
-+		(((uint16)(val) & (uint16)0xff00U) >> 8) ))
-+	
-+/* Byte swap a 32 bit value */
-+#define BCMSWAP32(val) \
-+	((uint32)( \
-+		(((uint32)(val) & (uint32)0x000000ffUL) << 24) | \
-+		(((uint32)(val) & (uint32)0x0000ff00UL) <<  8) | \
-+		(((uint32)(val) & (uint32)0x00ff0000UL) >>  8) | \
-+		(((uint32)(val) & (uint32)0xff000000UL) >> 24) ))
++/* local prototypes */
++static INLINE uint32 find_msbit(uint32 x);
 +
-+static INLINE uint16
-+bcmswap16(uint16 val)
-+{
-+	return BCMSWAP16(val);
-+}
 +
-+static INLINE uint32
-+bcmswap32(uint32 val)
-+{
-+	return BCMSWAP32(val);
-+}
++/*
++ * find_msbit: returns index of most significant set bit in x, with index
++ *   range defined as 0-31.  NOTE: returns zero if input is zero.
++ */
 +
-+/* buf	- start of buffer of shorts to swap */
-+/* len  - byte length of buffer */
-+static INLINE void
-+bcmswap16_buf(uint16 *buf, uint len)
-+{
-+	len = len/2;
++#if defined(USE_PENTIUM_BSR) && defined(__GNUC__)
 +
-+	while(len--){
-+		*buf = bcmswap16(*buf);
-+		buf++;
-+	}
++/*
++ * Implementation for Pentium processors and gcc.  Note that this
++ * instruction is actually very slow on some processors (e.g., family 5,
++ * model 2, stepping 12, "Pentium 75 - 200"), so we use the generic
++ * implementation instead.
++ */
++static INLINE uint32 find_msbit(uint32 x)
++{
++	uint msbit;
++        __asm__("bsrl %1,%0"
++                :"=r" (msbit)
++                :"r" (x));
++        return msbit;
 +}
 +
-+#ifndef hton16
-+#ifndef IL_BIGENDIAN
-+#define HTON16(i) BCMSWAP16(i)
-+#define	hton16(i) bcmswap16(i)
-+#define	hton32(i) bcmswap32(i)
-+#define	ntoh16(i) bcmswap16(i)
-+#define	ntoh32(i) bcmswap32(i)
-+#define ltoh16(i) (i)
-+#define ltoh32(i) (i)
-+#define htol16(i) (i)
-+#define htol32(i) (i)
-+#else
-+#define HTON16(i) (i)
-+#define	hton16(i) (i)
-+#define	hton32(i) (i)
-+#define	ntoh16(i) (i)
-+#define	ntoh32(i) (i)
-+#define	ltoh16(i) bcmswap16(i)
-+#define	ltoh32(i) bcmswap32(i)
-+#define htol16(i) bcmswap16(i)
-+#define htol32(i) bcmswap32(i)
-+#endif
-+#endif
-+
-+#ifndef IL_BIGENDIAN
-+#define ltoh16_buf(buf, i)
-+#define htol16_buf(buf, i)
 +#else
-+#define ltoh16_buf(buf, i) bcmswap16_buf((uint16*)buf, i)
-+#define htol16_buf(buf, i) bcmswap16_buf((uint16*)buf, i)
-+#endif
 +
 +/*
-+* load 16-bit value from unaligned little endian byte array.
-+*/
-+static INLINE uint16
-+ltoh16_ua(uint8 *bytes)
-+{
-+	return (bytes[1]<<8)+bytes[0];
-+}
++ * Generic Implementation
++ */
 +
-+/*
-+* load 32-bit value from unaligned little endian byte array.
-+*/
-+static INLINE uint32
-+ltoh32_ua(uint8 *bytes)
-+{
-+	return (bytes[3]<<24)+(bytes[2]<<16)+(bytes[1]<<8)+bytes[0];
-+}
++#define DB_POW_MASK16	0xffff0000
++#define DB_POW_MASK8	0x0000ff00
++#define DB_POW_MASK4	0x000000f0
++#define DB_POW_MASK2	0x0000000c
++#define DB_POW_MASK1	0x00000002
 +
-+/*
-+* load 16-bit value from unaligned big(network) endian byte array.
-+*/
-+static INLINE uint16
-+ntoh16_ua(uint8 *bytes)
++static INLINE uint32 find_msbit(uint32 x)
 +{
-+	return (bytes[0]<<8)+bytes[1];
++	uint32 temp_x = x;
++	uint msbit = 0;
++	if (temp_x & DB_POW_MASK16) {
++		temp_x >>= 16;
++		msbit = 16;
++	}
++	if (temp_x & DB_POW_MASK8) {
++		temp_x >>= 8;
++		msbit += 8;
++	}
++	if (temp_x & DB_POW_MASK4) {
++		temp_x >>= 4;
++		msbit += 4;
++	}
++	if (temp_x & DB_POW_MASK2) {
++		temp_x >>= 2;
++		msbit += 2;
++	}
++	if (temp_x & DB_POW_MASK1) {
++		msbit += 1;
++	}
++	return(msbit);
 +}
 +
-+/*
-+* load 32-bit value from unaligned big(network) endian byte array.
-+*/
-+static INLINE uint32
-+ntoh32_ua(uint8 *bytes)
-+{
-+	return (bytes[0]<<24)+(bytes[1]<<16)+(bytes[2]<<8)+bytes[3];
-+}
++#endif
 +
-+#endif /* _BCMENDIAN_H_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenet47xx.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenet47xx.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenet47xx.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenet47xx.h	2005-08-28 11:12:20.432858848 +0200
-@@ -0,0 +1,229 @@
++#endif /* _BITFUNCS_H */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/epivers.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/epivers.h	2005-09-16 10:29:18.185590272 +0200
+@@ -0,0 +1,69 @@
 +/*
-+ * Hardware-specific definitions for
-+ * Broadcom BCM47XX 10/100 Mbps Ethernet cores.
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ * 
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
 + *
-+ * Copyright 2001-2003, Broadcom Corporation   
-+ * All Rights Reserved.   
-+ *    
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
 + * $Id$
-+ */
++ *
++*/
 +
-+#ifndef	_bcmenet_47xx_h_
-+#define	_bcmenet_47xx_h_
++#ifndef _epivers_h_
++#define _epivers_h_
 +
-+#include <bcmdevs.h>
-+#include <hnddma.h>
++#ifdef	linux
++#include <linux/config.h>
++#endif
 +
-+#define	BCMENET_NFILTERS	64		/* # ethernet address filter entries */
-+#define	BCMENET_MCHASHBASE	0x200		/* multicast hash filter base address */
-+#define	BCMENET_MCHASHSIZE	256		/* multicast hash filter size in bytes */
-+#define	BCMENET_MAX_DMA		4096		/* chip has 12 bits of DMA addressing */
++/* Vendor Name, ASCII, 32 chars max */
++#ifdef COMPANYNAME
++#define	HPNA_VENDOR 		COMPANYNAME
++#else
++#define	HPNA_VENDOR 		"Broadcom Corporation"
++#endif
 +
-+/* power management event wakeup pattern constants */
-+#define	BCMENET_NPMP		4		/* chip supports 4 wakeup patterns */
-+#define	BCMENET_PMPBASE		0x400		/* wakeup pattern base address */
-+#define	BCMENET_PMPSIZE		0x80		/* 128bytes each pattern */
-+#define	BCMENET_PMMBASE		0x600		/* wakeup mask base address */
-+#define	BCMENET_PMMSIZE		0x10		/* 128bits each mask */
++/* Driver Date, ASCII, 32 chars max */
++#define HPNA_DRV_BUILD_DATE	__DATE__
 +
-+/* cpp contortions to concatenate w/arg prescan */
-+#ifndef PAD
-+#define	_PADLINE(line)	pad ## line
-+#define	_XSTR(line)	_PADLINE(line)
-+#define	PAD		_XSTR(__LINE__)
-+#endif	/* PAD */
++/* Hardware Manufacture Date, ASCII, 32 chars max */
++#define HPNA_HW_MFG_DATE	"Not Specified"
 +
-+/* sometimes you just need the enet mib definitions */
-+#include <bcmenetmib.h>
++/* See documentation for Device Type values, 32 values max */
++#ifndef	HPNA_DEV_TYPE
 +
-+/*
-+ * Host Interface Registers
-+ */
-+typedef volatile struct _bcmenettregs {
-+	/* Device and Power Control */
-+	uint32	devcontrol;
-+	uint32	PAD[2];
-+	uint32	biststatus;
-+	uint32	wakeuplength;
-+	uint32	PAD[3];
-+	
-+	/* Interrupt Control */
-+	uint32	intstatus;
-+	uint32	intmask;
-+	uint32	gptimer;
-+	uint32	PAD[23];
++#if	defined(CONFIG_BRCM_VJ)
++#define HPNA_DEV_TYPE		{ CDCF_V0_DEVICE_DISPLAY }
 +
-+	/* Ethernet MAC Address Filtering Control */
-+	uint32	PAD[2];
-+	uint32	enetftaddr;
-+	uint32	enetftdata;
-+	uint32	PAD[2];
++#elif	defined(CONFIG_BCRM_93725)
++#define HPNA_DEV_TYPE		{ CDCF_V0_DEVICE_CM_BRIDGE, CDCF_V0_DEVICE_DISPLAY }
 +
-+	/* Ethernet MAC Control */
-+	uint32	emactxmaxburstlen;
-+	uint32	emacrxmaxburstlen;
-+	uint32	emaccontrol;
-+	uint32	emacflowcontrol;
++#else
++#define HPNA_DEV_TYPE		{ CDCF_V0_DEVICE_PCINIC }
 +
-+	uint32	PAD[20];
++#endif
 +
-+	/* DMA Lazy Interrupt Control */
-+	uint32	intrecvlazy;
-+	uint32	PAD[63];
++#endif	/* !HPNA_DEV_TYPE */
 +
-+	/* DMA engine */
-+	dmaregs_t	dmaregs;
-+	dmafifo_t	dmafifo;
-+	uint32	PAD[116];
 +
-+	/* EMAC Registers */
-+	uint32 rxconfig;
-+	uint32 rxmaxlength;
-+	uint32 txmaxlength;
-+	uint32 PAD;
-+	uint32 mdiocontrol;
-+	uint32 mdiodata;
-+	uint32 emacintmask;
-+	uint32 emacintstatus;
-+	uint32 camdatalo;
-+	uint32 camdatahi;
-+	uint32 camcontrol;
-+	uint32 enetcontrol;
-+	uint32 txcontrol;
-+	uint32 txwatermark;
-+	uint32 mibcontrol;
-+	uint32 PAD[49];
++#define	EPI_MAJOR_VERSION	1
 +
-+	/* EMAC MIB counters */
-+	bcmenetmib_t	mib;
++#define	EPI_MINOR_VERSION	1
 +
-+	uint32	PAD[585];
++#define	EPI_RC_NUMBER		2
 +
-+	/* Sonics SiliconBackplane config registers */
-+	sbconfig_t	sbconfig;
-+} bcmenetregs_t;
++#define	EPI_INCREMENTAL_NUMBER	0
 +
-+/* device control */
-+#define	DC_PM		((uint32)1 << 7)	/* pattern filtering enable */
-+#define	DC_IP		((uint32)1 << 10)	/* internal ephy present (rev >= 1) */
-+#define	DC_ER		((uint32)1 << 15)	/* ephy reset */
-+#define	DC_MP		((uint32)1 << 16)	/* mii phy mode enable */
-+#define	DC_CO		((uint32)1 << 17)	/* mii phy mode: enable clocks */
-+#define	DC_PA_MASK	0x7c0000		/* mii phy mode: mdc/mdio phy address */
-+#define	DC_PA_SHIFT	18
++#define	EPI_BUILD_NUMBER	0
 +
-+/* wakeup length */
-+#define	WL_P0_MASK	0x7f			/* pattern 0 */
-+#define	WL_D0		((uint32)1 << 7)
-+#define	WL_P1_MASK	0x7f00			/* pattern 1 */
-+#define	WL_P1_SHIFT	8
-+#define	WL_D1		((uint32)1 << 15)
-+#define	WL_P2_MASK	0x7f0000		/* pattern 2 */
-+#define	WL_P2_SHIFT	16
-+#define	WL_D2		((uint32)1 << 23)
-+#define	WL_P3_MASK	0x7f000000		/* pattern 3 */
-+#define	WL_P3_SHIFT	24
-+#define	WL_D3		((uint32)1 << 31)
++#define	EPI_VERSION		1,1,2,0
 +
-+/* intstatus and intmask */
-+#define	I_PME		((uint32)1 << 6)	/* power management event */
-+#define	I_TO		((uint32)1 << 7)	/* general purpose timeout */
-+#define	I_PC		((uint32)1 << 10)	/* descriptor error */
-+#define	I_PD		((uint32)1 << 11)	/* data error */
-+#define	I_DE		((uint32)1 << 12)	/* descriptor protocol error */
-+#define	I_RU		((uint32)1 << 13)	/* receive descriptor underflow */
-+#define	I_RO		((uint32)1 << 14)	/* receive fifo overflow */
-+#define	I_XU		((uint32)1 << 15)	/* transmit fifo underflow */
-+#define	I_RI		((uint32)1 << 16)	/* receive interrupt */
-+#define	I_XI		((uint32)1 << 24)	/* transmit interrupt */
-+#define	I_EM		((uint32)1 << 26)	/* emac interrupt */
-+#define	I_MW		((uint32)1 << 27)	/* mii write */
-+#define	I_MR		((uint32)1 << 28)	/* mii read */
++#define	EPI_VERSION_NUM		0x01010200
 +
-+/* emaccontrol */
-+#define	EMC_CG		((uint32)1 << 0)	/* crc32 generation enable */
-+#define	EMC_EP		((uint32)1 << 2)	/* onchip ephy: powerdown (rev >= 1) */
-+#define	EMC_ED		((uint32)1 << 3)	/* onchip ephy: energy detected (rev >= 1) */
-+#define	EMC_LC_MASK	0xe0			/* onchip ephy: led control (rev >= 1) */
-+#define	EMC_LC_SHIFT	5
++/* Driver Version String, ASCII, 32 chars max */
++#define	EPI_VERSION_STR		"1.1.2.0"
++#define	EPI_ROUTER_VERSION_STR	"1.1.2.0"
 +
-+/* emacflowcontrol */
-+#define	EMF_RFH_MASK	0xff			/* rx fifo hi water mark */
-+#define	EMF_PG		((uint32)1 << 15)	/* enable pause frame generation */
++#endif /* _epivers_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h.in linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/epivers.h.in
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h.in	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/epivers.h.in	2005-09-16 10:29:18.186590120 +0200
+@@ -0,0 +1,69 @@
++/*
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ * 
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id$
++ *
++*/
 +
-+/* interrupt receive lazy */
-+#define	IRL_TO_MASK	0x00ffffff		/* timeout */
-+#define	IRL_FC_MASK	0xff000000		/* frame count */
-+#define	IRL_FC_SHIFT	24			/* frame count */
++#ifndef _epivers_h_
++#define _epivers_h_
 +
-+/* emac receive config */
-+#define	ERC_DB		((uint32)1 << 0)	/* disable broadcast */
-+#define	ERC_AM		((uint32)1 << 1)	/* accept all multicast */
-+#define	ERC_RDT		((uint32)1 << 2)	/* receive disable while transmitting */
-+#define	ERC_PE		((uint32)1 << 3)	/* promiscuous enable */
-+#define	ERC_LE		((uint32)1 << 4)	/* loopback enable */
-+#define	ERC_FE		((uint32)1 << 5)	/* enable flow control */
-+#define	ERC_UF		((uint32)1 << 6)	/* accept unicast flow control frame */
-+#define	ERC_RF		((uint32)1 << 7)	/* reject filter */
++#ifdef	linux
++#include <linux/config.h>
++#endif
 +
-+/* emac mdio control */
-+#define	MC_MF_MASK	0x7f			/* mdc frequency */
-+#define	MC_PE		((uint32)1 << 7)	/* mii preamble enable */
++/* Vendor Name, ASCII, 32 chars max */
++#ifdef COMPANYNAME
++#define	HPNA_VENDOR 		COMPANYNAME
++#else
++#define	HPNA_VENDOR 		"Broadcom Corporation"
++#endif
 +
-+/* emac mdio data */
-+#define	MD_DATA_MASK	0xffff			/* r/w data */
-+#define	MD_TA_MASK	0x30000			/* turnaround value */
-+#define	MD_TA_SHIFT	16
-+#define	MD_TA_VALID	(2 << MD_TA_SHIFT)	/* valid ta */
-+#define	MD_RA_MASK	0x7c0000		/* register address */
-+#define	MD_RA_SHIFT	18
-+#define	MD_PMD_MASK	0xf800000		/* physical media device */
-+#define	MD_PMD_SHIFT	23
-+#define	MD_OP_MASK	0x30000000		/* opcode */
-+#define	MD_OP_SHIFT	28
-+#define	MD_OP_WRITE	(1 << MD_OP_SHIFT)	/* write op */
-+#define	MD_OP_READ	(2 << MD_OP_SHIFT)	/* read op */
-+#define	MD_SB_MASK	0xc0000000		/* start bits */
-+#define	MD_SB_SHIFT	30
-+#define	MD_SB_START	(0x1 << MD_SB_SHIFT)	/* start of frame */
++/* Driver Date, ASCII, 32 chars max */
++#define HPNA_DRV_BUILD_DATE	__DATE__
 +
-+/* emac intstatus and intmask */
-+#define	EI_MII		((uint32)1 << 0)	/* mii mdio interrupt */
-+#define	EI_MIB		((uint32)1 << 1)	/* mib interrupt */
-+#define	EI_FLOW		((uint32)1 << 2)	/* flow control interrupt */
++/* Hardware Manufacture Date, ASCII, 32 chars max */
++#define HPNA_HW_MFG_DATE	"Not Specified"
 +
-+/* emac cam data high */
-+#define	CD_V		((uint32)1 << 16)	/* valid bit */
++/* See documentation for Device Type values, 32 values max */
++#ifndef	HPNA_DEV_TYPE
 +
-+/* emac cam control */
-+#define	CC_CE		((uint32)1 << 0)	/* cam enable */
-+#define	CC_MS		((uint32)1 << 1)	/* mask select */
-+#define	CC_RD		((uint32)1 << 2)	/* read */
-+#define	CC_WR		((uint32)1 << 3)	/* write */
-+#define	CC_INDEX_MASK	0x3f0000		/* index */
-+#define	CC_INDEX_SHIFT	16
-+#define	CC_CB		((uint32)1 << 31)	/* cam busy */
++#if	defined(CONFIG_BRCM_VJ)
++#define HPNA_DEV_TYPE		{ CDCF_V0_DEVICE_DISPLAY }
 +
-+/* emac ethernet control */
-+#define	EC_EE		((uint32)1 << 0)	/* emac enable */
-+#define	EC_ED		((uint32)1 << 1)	/* emac disable */
-+#define	EC_ES		((uint32)1 << 2)	/* emac soft reset */
-+#define	EC_EP		((uint32)1 << 3)	/* external phy select */
++#elif	defined(CONFIG_BCRM_93725)
++#define HPNA_DEV_TYPE		{ CDCF_V0_DEVICE_CM_BRIDGE, CDCF_V0_DEVICE_DISPLAY }
 +
-+/* emac transmit control */
-+#define	EXC_FD		((uint32)1 << 0)	/* full duplex */
-+#define	EXC_FM		((uint32)1 << 1)	/* flowmode */
-+#define	EXC_SB		((uint32)1 << 2)	/* single backoff enable */
-+#define	EXC_SS		((uint32)1 << 3)	/* small slottime */
++#else
++#define HPNA_DEV_TYPE		{ CDCF_V0_DEVICE_PCINIC }
 +
-+/* emac mib control */
-+#define	EMC_RZ		((uint32)1 << 0)	/* autoclear on read */
++#endif
 +
-+/* sometimes you just need the enet rxheader definitions */
-+#include <bcmenetrxh.h>
++#endif	/* !HPNA_DEV_TYPE */
 +
-+#endif	/* _bcmenet_47xx_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenetmib.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenetmib.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenetmib.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenetmib.h	2005-08-28 11:12:20.432858848 +0200
-@@ -0,0 +1,81 @@
-+/*
-+ * Hardware-specific MIB definition for
-+ * Broadcom Home Networking Division
-+ * BCM44XX and BCM47XX 10/100 Mbps Ethernet cores.
-+ * 
-+ * Copyright 2001-2003, Broadcom Corporation   
-+ * All Rights Reserved.   
-+ *    
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
-+ * $Id$
-+ */
 +
-+#ifndef _bcmenetmib_h_
-+#define _bcmenetmib_h_
++#define	EPI_MAJOR_VERSION	@EPI_MAJOR_VERSION@
 +
-+/* cpp contortions to concatenate w/arg prescan */
-+#ifndef PAD
-+#define	_PADLINE(line)	pad ## line
-+#define	_XSTR(line)	_PADLINE(line)
-+#define	PAD		_XSTR(__LINE__)
-+#endif	/* PAD */
++#define	EPI_MINOR_VERSION	@EPI_MINOR_VERSION@
 +
-+/*
-+ * EMAC MIB Registers
-+ */
-+typedef volatile struct {
-+	uint32 tx_good_octets;
-+	uint32 tx_good_pkts;
-+	uint32 tx_octets;
-+	uint32 tx_pkts;
-+	uint32 tx_broadcast_pkts;
-+	uint32 tx_multicast_pkts;
-+	uint32 tx_len_64;
-+	uint32 tx_len_65_to_127;
-+	uint32 tx_len_128_to_255;
-+	uint32 tx_len_256_to_511;
-+	uint32 tx_len_512_to_1023;
-+	uint32 tx_len_1024_to_max;
-+	uint32 tx_jabber_pkts;
-+	uint32 tx_oversize_pkts;
-+	uint32 tx_fragment_pkts;
-+	uint32 tx_underruns;
-+	uint32 tx_total_cols;
-+	uint32 tx_single_cols;
-+	uint32 tx_multiple_cols;
-+	uint32 tx_excessive_cols;
-+	uint32 tx_late_cols;
-+	uint32 tx_defered;
-+	uint32 tx_carrier_lost;
-+	uint32 tx_pause_pkts;
-+	uint32 PAD[8];
++#define	EPI_RC_NUMBER		@EPI_RC_NUMBER@
 +
-+	uint32 rx_good_octets;
-+	uint32 rx_good_pkts;
-+	uint32 rx_octets;
-+	uint32 rx_pkts;
-+	uint32 rx_broadcast_pkts;
-+	uint32 rx_multicast_pkts;
-+	uint32 rx_len_64;
-+	uint32 rx_len_65_to_127;
-+	uint32 rx_len_128_to_255;
-+	uint32 rx_len_256_to_511;
-+	uint32 rx_len_512_to_1023;
-+	uint32 rx_len_1024_to_max;
-+	uint32 rx_jabber_pkts;
-+	uint32 rx_oversize_pkts;
-+	uint32 rx_fragment_pkts;
-+	uint32 rx_missed_pkts;
-+	uint32 rx_crc_align_errs;
-+	uint32 rx_undersize;
-+	uint32 rx_crc_errs;
-+	uint32 rx_align_errs;
-+	uint32 rx_symbol_errs;
-+	uint32 rx_pause_pkts;
-+	uint32 rx_nonpause_pkts;
-+} bcmenetmib_t;
++#define	EPI_INCREMENTAL_NUMBER	@EPI_INCREMENTAL_NUMBER@
 +
-+#endif	/* _bcmenetmib_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenetrxh.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenetrxh.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenetrxh.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmenetrxh.h	2005-08-28 11:12:20.433858696 +0200
-@@ -0,0 +1,43 @@
++#define	EPI_BUILD_NUMBER	@EPI_BUILD_NUMBER@
++
++#define	EPI_VERSION		@EPI_VERSION@
++
++#define	EPI_VERSION_NUM		@EPI_VERSION_NUM@
++
++/* Driver Version String, ASCII, 32 chars max */
++#define	EPI_VERSION_STR		"@EPI_VERSION_STR@"
++#define	EPI_ROUTER_VERSION_STR	"@EPI_ROUTER_VERSION_STR@"
++
++#endif /* _epivers_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/etsockio.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/etsockio.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/etsockio.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/etsockio.h	2005-09-16 10:29:18.186590120 +0200
+@@ -0,0 +1,60 @@
 +/*
-+ * Hardware-specific Receive Data Header for the
-+ * Broadcom Home Networking Division
-+ * BCM44XX and BCM47XX 10/100 Mbps Ethernet cores.
++ * Driver-specific socket ioctls
++ * used by BSD, Linux, and PSOS
++ * Broadcom BCM44XX 10/100Mbps Ethernet Device Driver
 + *
 + * Copyright 2001-2003, Broadcom Corporation   
 + * All Rights Reserved.   
@@ -8522,206 +7427,248 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmenetrxh.h linux-2.6.12.5-
 + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
 + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
 + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
++ *
 + * $Id$
 + */
 +
-+#ifndef _bcmenetrxh_h_
-+#define	_bcmenetrxh_h_
++#ifndef _etsockio_h_
++#define _etsockio_h_
 +
-+/*
-+ * The Ethernet MAC core returns an 8-byte Receive Frame Data Header
-+ * with every frame consisting of
-+ * 16bits of frame length, followed by
-+ * 16bits of EMAC rx descriptor info, followed by 32bits of undefined.
-+ */
-+typedef volatile struct {
-+	uint16	len;
-+	uint16	flags;
-+	uint16	pad[12];
-+} bcmenetrxh_t;
++/* THESE MUST BE CONTIGUOUS AND CONSISTENT WITH VALUES IN ETC.H */
 +
-+#define	RXHDR_LEN	28
 +
-+#define	RXF_L		((uint16)1 << 11)	/* last buffer in a frame */
-+#define	RXF_MISS	((uint16)1 << 7)	/* received due to promisc mode */
-+#define	RXF_BRDCAST	((uint16)1 << 6)	/* dest is broadcast address */
-+#define	RXF_MULT	((uint16)1 << 5)	/* dest is multicast address */
-+#define	RXF_LG		((uint16)1 << 4)	/* frame length > rxmaxlength */
-+#define	RXF_NO		((uint16)1 << 3)	/* odd number of nibbles */
-+#define	RXF_RXER	((uint16)1 << 2)	/* receive symbol error */
-+#define	RXF_CRC		((uint16)1 << 1)	/* crc error */
-+#define	RXF_OV		((uint16)1 << 0)	/* fifo overflow */
++#if defined(linux)
++#define SIOCSETCUP		(SIOCDEVPRIVATE + 0)
++#define SIOCSETCDOWN		(SIOCDEVPRIVATE + 1)
++#define SIOCSETCLOOP		(SIOCDEVPRIVATE + 2)
++#define SIOCGETCDUMP		(SIOCDEVPRIVATE + 3)
++#define SIOCSETCSETMSGLEVEL	(SIOCDEVPRIVATE + 4)
++#define SIOCSETCPROMISC		(SIOCDEVPRIVATE + 5)
++#define SIOCSETCTXDOWN		(SIOCDEVPRIVATE + 6)	/* obsolete */
++#define SIOCSETCSPEED		(SIOCDEVPRIVATE + 7)
++#define SIOCTXGEN		(SIOCDEVPRIVATE + 8)
++#define SIOCGETCPHYRD		(SIOCDEVPRIVATE + 9)
++#define SIOCSETCPHYWR		(SIOCDEVPRIVATE + 10)
++#define SIOCPERF		    (SIOCDEVPRIVATE + 11)
++#define SIOCPERFDMA		    (SIOCDEVPRIVATE + 12)
 +
-+#endif	/* _bcmenetrxh_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmnvram.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmnvram.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmnvram.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmnvram.h	2005-08-28 11:12:20.433858696 +0200
-@@ -0,0 +1,131 @@
++#else	/* !linux */
++
++#define SIOCSETCUP		_IOWR('e', 130 + 0, struct ifreq)
++#define SIOCSETCDOWN		_IOWR('e', 130 + 1, struct ifreq)
++#define SIOCSETCLOOP		_IOWR('e', 130 + 2, struct ifreq)
++#define SIOCGETCDUMP		_IOWR('e', 130 + 3, struct ifreq)
++#define SIOCSETCSETMSGLEVEL	_IOWR('e', 130 + 4, struct ifreq)
++#define SIOCSETCPROMISC		_IOWR('e', 130 + 5, struct ifreq)
++#define SIOCSETCTXDOWN		_IOWR('e', 130 + 6, struct ifreq)	/* obsolete */
++#define SIOCSETCSPEED		_IOWR('e', 130 + 7, struct ifreq)
++#define SIOCTXGEN		_IOWR('e', 130 + 8, struct ifreq)
++
++#endif
++
++/* arg to SIOCTXGEN */
++struct txg {
++	uint32 num;		/* number of frames to send */
++	uint32 delay;		/* delay in microseconds between sending each */
++	uint32 size;		/* size of ether frame to send */
++	uchar buf[1514];	/* starting ether frame data */
++};
++
++#endif
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/flash.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/flash.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/flash.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/flash.h	2005-09-16 10:29:18.187589968 +0200
+@@ -0,0 +1,184 @@
 +/*
-+ * NVRAM variable manipulation
++ * flash.h: Common definitions for flash access.
 + *
-+ * $Copyright Open Broadcom Corporation$
++ * Copyright 2001-2003, Broadcom Corporation   
++ * All Rights Reserved.   
++ *    
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
 + *
-+ * $Id: bcmnvram.h,v 1.1.1.1 2004/01/21 03:50:44 gigis Exp $
++ * $Id$
 + */
 +
-+#ifndef _bcmnvram_h_
-+#define _bcmnvram_h_
++/* Types of flashes we know about */
++typedef enum _flash_type {OLD, BSC, SCS, AMD, SST} flash_type_t;
 +
-+#ifndef _LANGUAGE_ASSEMBLY
++/* Commands to write/erase the flases */
++typedef struct _flash_cmds{
++	flash_type_t	type;
++	bool		need_unlock;
++	uint16		pre_erase;
++	uint16		erase_block;
++	uint16		erase_chip;
++	uint16		write_word;
++	uint16		write_buf;
++	uint16		clear_csr;
++	uint16		read_csr;
++	uint16		read_id;
++	uint16		confirm;
++	uint16		read_array;
++} flash_cmds_t;
 +
-+#include <typedefs.h>
++#define	UNLOCK_CMD_WORDS	2
 +
-+struct nvram_header {
-+	uint32 magic;
-+	uint32 len;
-+	uint32 crc_ver_init;	/* 0:7 crc, 8:15 ver, 16:27 init, mem. test 28, 29-31 reserved */
-+	uint32 config_refresh;	/* 0:15 config, 16:31 refresh */
-+	uint32 config_ncdl;	/* ncdl values for memc */
-+};
++typedef struct _unlock_cmd {
++  uint		addr[UNLOCK_CMD_WORDS];
++  uint16	cmd[UNLOCK_CMD_WORDS];
++} unlock_cmd_t;
 +
-+struct nvram_tuple {
-+	char *name;
-+	char *value;
-+	struct nvram_tuple *next;
-+};
++/* Flash descriptors */
++typedef struct _flash_desc {
++	uint16		mfgid;		/* Manufacturer Id */
++	uint16		devid;		/* Device Id */
++	uint		size;		/* Total size in bytes */
++	uint		width;		/* Device width in bytes */
++	flash_type_t	type;		/* Device type old, S, J */
++	uint		bsize;		/* Block size */
++	uint		nb;		/* Number of blocks */
++	uint		ff;		/* First full block */
++	uint		lf;		/* Last full block */
++	uint		nsub;		/* Number of subblocks */
++	uint		*subblocks;	/* Offsets for subblocks */
++	char		*desc;		/* Description */
++} flash_desc_t;
 +
-+/*
-+ * Initialize NVRAM access. May be unnecessary or undefined on certain
-+ * platforms.
-+ */
-+extern int nvram_init(void *sbh);
 +
-+/*
-+ * Disable NVRAM access. May be unnecessary or undefined on certain
-+ * platforms.
-+ */
-+extern void nvram_exit(void);
++#ifdef	DECLARE_FLASHES
 +
-+/*
-+ * Get the value of an NVRAM variable. The pointer returned may be
-+ * invalid after a set.
-+ * @param	name	name of variable to get
-+ * @return	value of variable or NULL if undefined
-+ */
-+extern char * nvram_get(const char *name);
++flash_cmds_t flash_cmds[] = {
++/*	  type	needu	preera	eraseb	erasech	write	wbuf	clcsr	rdcsr	rdid	confrm	read */
++	{ BSC,	0,	0x00,	0x20,	0x00,	0x40,	0x00,	0x50,	0x70,	0x90,	0xd0,	0xff },
++	{ SCS,	0,	0x00,	0x20,	0x00,	0x40,	0xe8,	0x50,	0x70,	0x90,	0xd0,	0xff },
++	{ AMD,	1,	0x80,	0x30,	0x10,	0xa0,	0x00,	0x00,	0x00,	0x90,	0x00,	0xf0 },
++	{ SST,	1,	0x80,	0x50,	0x10,	0xa0,	0x00,	0x00,	0x00,	0x90,	0x00,	0xf0 },
++	{ 0 }
++};
 +
-+/* 
-+ * Get the value of an NVRAM variable.
-+ * @param	name	name of variable to get
-+ * @return	value of variable or NUL if undefined
-+ */
-+#define nvram_safe_get(name) (nvram_get(name) ? : "")
++unlock_cmd_t unlock_cmd_amd = {
++#ifdef MIPSEB
++/* addr: */	{ 0x0aa8,	0x0556},
++#else
++/* addr: */	{ 0x0aaa,	0x0554},
++#endif
++/* data: */	{ 0xaa,		0x55}
++};
 +
-+/*
-+ * Match an NVRAM variable.
-+ * @param	name	name of variable to match
-+ * @param	match	value to compare against value of variable
-+ * @return	TRUE if variable is defined and its value is string equal
-+ *		to match or FALSE otherwise
-+ */
-+static INLINE int
-+nvram_match(char *name, char *match) {
-+	const char *value = nvram_get(name);
-+	return (value && !strcmp(value, match));
-+}
++unlock_cmd_t unlock_cmd_sst = {
++#ifdef MIPSEB
++/* addr: */	{ 0xaaa8,	0x5556},
++#else
++/* addr: */	{ 0xaaaa,	0x5554},
++#endif
++/* data: */	{ 0xaa,		0x55}
++};
 +
-+/*
-+ * Inversely match an NVRAM variable.
-+ * @param	name	name of variable to match
-+ * @param	match	value to compare against value of variable
-+ * @return	TRUE if variable is defined and its value is not string
-+ *		equal to invmatch or FALSE otherwise
-+ */
-+static INLINE int
-+nvram_invmatch(char *name, char *invmatch) {
-+	const char *value = nvram_get(name);
-+	return (value && strcmp(value, invmatch));
-+}
++#define AMD_CMD 0xaaa
++#define SST_CMD 0xaaaa
 +
-+/*
-+ * Set the value of an NVRAM variable. The name and value strings are
-+ * copied into private storage. Pointers to previously set values
-+ * may become invalid. The new value may be immediately
-+ * retrieved but will not be permanently stored until a commit.
-+ * @param	name	name of variable to set
-+ * @param	value	value of variable
-+ * @return	0 on success and errno on failure
-+ */
-+extern int nvram_set(const char *name, const char *value);
++/* intel unlock block cmds */
++#define INTEL_UNLOCK1	0x60
++#define INTEL_UNLOCK2	0xD0
 +
-+/*
-+ * Unset an NVRAM variable. Pointers to previously set values
-+ * remain valid until a set.
-+ * @param	name	name of variable to unset
-+ * @return	0 on success and errno on failure
-+ * NOTE: use nvram_commit to commit this change to flash.
-+ */
-+extern int nvram_unset(const char *name);
++/* Just eight blocks of 8KB byte each */
 +
-+/*
-+ * Commit NVRAM variables to permanent storage. All pointers to values
-+ * may be invalid after a commit.
-+ * NVRAM values are undefined after a commit.
-+ * @return	0 on success and errno on failure
-+ */
-+extern int nvram_commit(void);
++uint blk8x8k[] = { 0x00000000,
++		   0x00002000,
++		   0x00004000,
++		   0x00006000,
++		   0x00008000,
++		   0x0000a000,
++		   0x0000c000,
++		   0x0000e000,
++		   0x00010000
++};
 +
-+/*
-+ * Get all NVRAM variables (format name=value\0 ... \0\0).
-+ * @param	buf	buffer to store variables
-+ * @param	count	size of buffer in bytes
-+ * @return	0 on success and errno on failure
-+ */
-+extern int nvram_getall(char *buf, int count);
++/* Funky AMD arrangement for 29xx800's */
++uint amd800[] = { 0x00000000,		/* 16KB */
++		  0x00004000,		/* 32KB */
++		  0x0000c000,		/* 8KB */
++		  0x0000e000,		/* 8KB */
++		  0x00010000,		/* 8KB */
++		  0x00012000,		/* 8KB */
++		  0x00014000,		/* 32KB */
++		  0x0001c000,		/* 16KB */
++		  0x00020000
++};
 +
-+extern int kernel_write(unsigned char *buffer, int offset, int length);
++/* AMD arrangement for 29xx160's */
++uint amd4112[] = { 0x00000000,		/* 32KB */
++		   0x00008000,		/* 8KB */
++		   0x0000a000,		/* 8KB */
++		   0x0000c000,		/* 16KB */
++		   0x00010000
++};
++uint amd2114[] = { 0x00000000,		/* 16KB */
++		   0x00004000,		/* 8KB */
++		   0x00006000,		/* 8KB */
++		   0x00008000,		/* 32KB */
++		   0x00010000
++};
 +
-+#endif /* _LANGUAGE_ASSEMBLY */
 +
-+#define NVRAM_MAGIC		0x48534C46	/* 'FLSH' */
-+#define NVRAM_VERSION		1
-+#define NVRAM_HEADER_SIZE	20
-+#define NVRAM_LOC_GAP		0x100000
-+#define NVRAM_SPACE		0x2000
-+#define NVRAM_FIRST_LOC		(0xbfd00000 - NVRAM_SPACE)
-+#define NVRAM_LAST_LOC		(0xc0000000 - NVRAM_SPACE)
 +
-+#endif /* _bcmnvram_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmsrom.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmsrom.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmsrom.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmsrom.h	2005-08-28 11:12:20.433858696 +0200
-@@ -0,0 +1,24 @@
-+/*
-+ * Misc useful routines to access NIC srom
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
++flash_desc_t flashes[] = {
++	{ 0x00b0, 0x00d0, 0x0200000, 2,	SCS, 0x10000, 32,  0, 31,  0, NULL,    "Intel 28F160S3/5 1Mx16" },
++	{ 0x00b0, 0x00d4, 0x0400000, 2,	SCS, 0x10000, 64,  0, 63,  0, NULL,    "Intel 28F320S3/5 2Mx16" },
++	{ 0x0089, 0x8890, 0x0200000, 2,	BSC, 0x10000, 32,  0, 30,  8, blk8x8k, "Intel 28F160B3 1Mx16 TopB" },
++	{ 0x0089, 0x8891, 0x0200000, 2,	BSC, 0x10000, 32,  1, 31,  8, blk8x8k, "Intel 28F160B3 1Mx16 BotB" },
++	{ 0x0089, 0x8896, 0x0400000, 2,	BSC, 0x10000, 64,  0, 62,  8, blk8x8k, "Intel 28F320B3 2Mx16 TopB" },
++	{ 0x0089, 0x8897, 0x0400000, 2,	BSC, 0x10000, 64,  1, 63,  8, blk8x8k, "Intel 28F320B3 2Mx16 BotB" },
++	{ 0x0089, 0x8898, 0x0800000, 2,	BSC, 0x10000, 128, 0, 126, 8, blk8x8k, "Intel 28F640B3 4Mx16 TopB" },
++	{ 0x0089, 0x8899, 0x0800000, 2,	BSC, 0x10000, 128, 1, 127, 8, blk8x8k, "Intel 28F640B3 4Mx16 BotB" },
++	{ 0x0089, 0x88C2, 0x0200000, 2,	BSC, 0x10000, 32,  0, 30,  8, blk8x8k, "Intel 28F160C3 1Mx16 TopB" },
++	{ 0x0089, 0x88C3, 0x0200000, 2,	BSC, 0x10000, 32,  1, 31,  8, blk8x8k, "Intel 28F160C3 1Mx16 BotB" },
++	{ 0x0089, 0x88C4, 0x0400000, 2,	BSC, 0x10000, 64,  0, 62,  8, blk8x8k, "Intel 28F320C3 2Mx16 TopB" },
++	{ 0x0089, 0x88C5, 0x0400000, 2,	BSC, 0x10000, 64,  1, 63,  8, blk8x8k, "Intel 28F320C3 2Mx16 BotB" },
++	{ 0x0089, 0x88CC, 0x0800000, 2,	BSC, 0x10000, 128, 0, 126, 8, blk8x8k, "Intel 28F640C3 4Mx16 TopB" },
++	{ 0x0089, 0x88CD, 0x0800000, 2,	BSC, 0x10000, 128, 1, 127, 8, blk8x8k, "Intel 28F640C3 4Mx16 BotB" },
++	{ 0x0089, 0x0014, 0x0400000, 2,	SCS, 0x20000, 32,  0, 31,  0, NULL,    "Intel 28F320J5 2Mx16" },
++	{ 0x0089, 0x0015, 0x0800000, 2,	SCS, 0x20000, 64,  0, 63,  0, NULL,    "Intel 28F640J5 4Mx16" },
++	{ 0x0089, 0x0016, 0x0400000, 2,	SCS, 0x20000, 32,  0, 31,  0, NULL,    "Intel 28F320J3 2Mx16" },
++	{ 0x0089, 0x0017, 0x0800000, 2,	SCS, 0x20000, 64,  0, 63,  0, NULL,    "Intel 28F640J3 4Mx16" },
++	{ 0x0089, 0x0018, 0x1000000, 2,	SCS, 0x20000, 128, 0, 127, 0, NULL,    "Intel 28F128J3 8Mx16" },
++	{ 0x00b0, 0x00e3, 0x0400000, 2,	BSC, 0x10000, 64,  1, 63,  8, blk8x8k, "Sharp 28F320BJE 2Mx16 BotB" },
++	{ 0x0001, 0x224a, 0x0100000, 2,	AMD, 0x10000, 16,  0, 13,  8, amd800,  "AMD 29DL800BT 512Kx16 TopB" },
++	{ 0x0001, 0x22cb, 0x0100000, 2,	AMD, 0x10000, 16,  2, 15,  8, amd800,  "AMD 29DL800BB 512Kx16 BotB" },
++	{ 0x0001, 0x22c4, 0x0200000, 2,	AMD, 0x10000, 32,  0, 30,  4, amd2114, "AMD 29lv160DT 1Mx16 TopB" },
++	{ 0x0001, 0x2249, 0x0200000, 2,	AMD, 0x10000, 32,  1, 31,  4, amd4112, "AMD 29lv160DB 1Mx16 BotB" },
++	{ 0x0001, 0x22f6, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  8, blk8x8k, "AMD 29lv320DT 2Mx16 TopB" },
++	{ 0x0001, 0x22f9, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  8, blk8x8k, "AMD 29lv320DB 2Mx16 BotB" },
++	{ 0x0001, 0x2201, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  8, blk8x8k, "AMD 29lv320MT 2Mx16 TopB" },
++	{ 0x0001, 0x2200, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  8, blk8x8k, "AMD 29lv320MB 2Mx16 BotB" },
++	{ 0x0020, 0x22CA, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  4, amd4112, "ST 29w320DT 2Mx16 TopB" },
++	{ 0x0020, 0x22CB, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  4, amd2114, "ST 29w320DB 2Mx16 BotB" },
++	{ 0x00C2, 0x00A7, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  4, amd4112, "MX29LV320T 2Mx16 TopB" },
++	{ 0x00C2, 0x00A8, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  4, amd2114, "MX29LV320B 2Mx16 BotB" },
++	{ 0x0004, 0x22F6, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  4, amd4112, "MBM29LV320TE 2Mx16 TopB" },
++	{ 0x0004, 0x22F9, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  4, amd2114, "MBM29LV320BE 2Mx16 BotB" },
++	{ 0x0098, 0x009A, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  4, amd4112, "TC58FVT321 2Mx16 TopB" },
++	{ 0x0098, 0x009C, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  4, amd2114, "TC58FVB321 2Mx16 BotB" }, 
++	{ 0x00C2, 0x22A7, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  4, amd4112, "MX29LV320T 2Mx16 TopB" },
++	{ 0x00C2, 0x22A8, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  4, amd2114, "MX29LV320B 2Mx16 BotB" },
++	{ 0x00BF, 0x2783, 0x0400000, 2,	SST, 0x10000, 64,  0, 63,  0, NULL,    "SST39VF320 2Mx16" },
++	{ 0,      0,      0,         0,	OLD, 0,       0,   0, 0,   0, NULL,    NULL },
++};
 +
-+#ifndef	_bcmsrom_h_
-+#define	_bcmsrom_h_
++#else
 +
-+extern int srom_var_init(uint bus, void *curmap, void *osh, char **vars, int *count);
++extern flash_cmds_t flash_cmds[];
++extern unlock_cmd_t unlock_cmd;
++extern flash_desc_t flashes[];
 +
-+extern int srom_read(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf);
-+extern int srom_write(uint bus, void *curmap, void *osh, uint byteoff, uint nbytes, uint16 *buf);
-+extern int srom_parsecis(uint8 *cis, char **vars, int *count);
-+	   
-+#endif	/* _bcmsrom_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmutils.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmutils.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/bcmutils.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bcmutils.h	2005-08-28 11:12:20.435858392 +0200
-@@ -0,0 +1,136 @@
++#endif
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/flashutl.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/flashutl.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/flashutl.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/flashutl.h	2005-09-16 10:29:18.187589968 +0200
+@@ -0,0 +1,34 @@
 +/*
-+ * Misc useful os-independent macros and functions.
++ * BCM47XX FLASH driver interface
 + *
 + * Copyright 2001-2003, Broadcom Corporation   
 + * All Rights Reserved.   
@@ -8733,223 +7680,220 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bcmutils.h linux-2.6.12.5-br
 + * $Id$
 + */
 +
-+#ifndef	_bcmutils_h_
-+#define	_bcmutils_h_
++#ifndef _flashutl_h_
++#define _flashutl_h_
 +
-+#ifndef MIN
-+#define	MIN(a, b)		(((a)<(b))?(a):(b))
-+#endif
++#define FLASH_BASE      0xbfc00000		/* BCM4710 */
 +
-+#ifndef MAX
-+#define	MAX(a, b)		(((a)>(b))?(a):(b))
-+#endif
++int	flash_init(void* base_addr, char *flash_str);
++int	flash_erase(void);
++int	flash_eraseblk(unsigned long off);
++int	flash_write(unsigned long off, uint16 *src, uint nbytes);
++unsigned long	flash_block_base(unsigned long off);
++unsigned long	flash_block_lim(unsigned long off);
++int FlashWriteRange(unsigned short* dst, unsigned short* src, unsigned int numbytes);
 +
-+#define CEIL(x, y)		(((x) + ((y)-1)) / (y))
-+#define	ROUNDUP(x, y)		((((ulong)(x)+((y)-1))/(y))*(y))
-+#define	ISALIGNED(a, x)		(((uint)(a) & ((x)-1)) == 0)
-+#define	ISPOWEROF2(x)		((((x)-1)&(x))==0)
-+#define	OFFSETOF(type, member)	((uint) &((type *)0)->member)
-+#define ARRAYSIZE(a)		(sizeof(a)/sizeof(a[0]))
++void nvWrite(unsigned short *data, unsigned int len);
 +
-+/* bit map related macros */
-+#ifndef setbit
-+#define	NBBY	8	/* 8 bits per byte */
-+#define	setbit(a,i)	((a)[(i)/NBBY] |= 1<<((i)%NBBY))
-+#define	clrbit(a,i)	((a)[(i)/NBBY] &= ~(1<<((i)%NBBY)))
-+#define	isset(a,i)	((a)[(i)/NBBY] & (1<<((i)%NBBY)))
-+#define	isclr(a,i)	(((a)[(i)/NBBY] & (1<<((i)%NBBY))) == 0)
-+#endif
++/* Global vars */
++extern char*		flashutl_base;
++extern flash_desc_t*	flashutl_desc;
++extern flash_cmds_t*	flashutl_cmd;
 +
-+#define	NBITS(type)	(sizeof (type) * 8)
++#endif /* _flashutl_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/hnddma.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/hnddma.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/hnddma.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/hnddma.h	2005-09-16 10:29:18.188589816 +0200
+@@ -0,0 +1,181 @@
++/*
++ * Generic Broadcom Home Networking Division (HND) DMA engine definitions.
++ * This supports the following chips: BCM42xx, 44xx, 47xx .
++ *
++ * $Id$
++ * Copyright 2001-2003, Broadcom Corporation   
++ * All Rights Reserved.   
++ *    
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
++ */
 +
-+#define _BCM_U	0x01	/* upper */
-+#define _BCM_L	0x02	/* lower */
-+#define _BCM_D	0x04	/* digit */
-+#define _BCM_C	0x08	/* cntrl */
-+#define _BCM_P	0x10	/* punct */
-+#define _BCM_S	0x20	/* white space (space/lf/tab) */
-+#define _BCM_X	0x40	/* hex digit */
-+#define _BCM_SP	0x80	/* hard space (0x20) */
-+
-+extern unsigned char bcm_ctype[];
-+#define bcm_ismask(x) (bcm_ctype[(int)(unsigned char)(x)])
-+
-+#define bcm_isalnum(c)	((bcm_ismask(c)&(_BCM_U|_BCM_L|_BCM_D)) != 0)
-+#define bcm_isalpha(c)	((bcm_ismask(c)&(_BCM_U|_BCM_L)) != 0)
-+#define bcm_iscntrl(c)	((bcm_ismask(c)&(_BCM_C)) != 0)
-+#define bcm_isdigit(c)	((bcm_ismask(c)&(_BCM_D)) != 0)
-+#define bcm_isgraph(c)	((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D)) != 0)
-+#define bcm_islower(c)	((bcm_ismask(c)&(_BCM_L)) != 0)
-+#define bcm_isprint(c)	((bcm_ismask(c)&(_BCM_P|_BCM_U|_BCM_L|_BCM_D|_BCM_SP)) != 0)
-+#define bcm_ispunct(c)	((bcm_ismask(c)&(_BCM_P)) != 0)
-+#define bcm_isspace(c)	((bcm_ismask(c)&(_BCM_S)) != 0)
-+#define bcm_isupper(c)	((bcm_ismask(c)&(_BCM_U)) != 0)
-+#define bcm_isxdigit(c)	((bcm_ismask(c)&(_BCM_D|_BCM_X)) != 0)
++#ifndef	_hnddma_h_
++#define	_hnddma_h_
 +
 +/*
-+ * Spin at most 'us' microseconds while 'exp' is true.
-+ * Caller should explicitly test 'exp' when this completes
-+ * and take appropriate error action if 'exp' is still true.
++ * Each DMA processor consists of a transmit channel and a receive channel.
 + */
-+#define SPINWAIT(exp, us) { \
-+	uint countdown = (us) + 9; \
-+	while ((exp) && (countdown >= 10)) {\
-+		OSL_DELAY(10); \
-+		countdown -= 10; \
-+	} \
-+}
-+
-+/* generic osl packet queue */
-+struct pktq {
-+	void *head;
-+	void *tail;
-+	uint  len;
-+	uint  maxlen; 
-+};
-+#define DEFAULT_QLEN	128
-+
-+#define	pktq_len(q)		((q)->len)
-+#define	pktq_avail(q)	((q)->maxlen - (q)->len)
-+#define	pktq_head(q)	((q)->head)
-+#define	pktq_full(q)	((q)->len >= (q)->maxlen)
-+
-+/* crc defines */
-+#define CRC8_INIT_VALUE  0xff		/* Initial CRC8 checksum value */
-+#define CRC8_GOOD_VALUE  0x9f		/* Good final CRC8 checksum value */
-+#define CRC16_INIT_VALUE 0xffff		/* Initial CRC16 checksum value */
-+#define CRC16_GOOD_VALUE 0xf0b8		/* Good final CRC16 checksum value */
-+#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
-+#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */
++typedef volatile struct {
++	/* transmit channel */
++	uint32	xmtcontrol;			/* enable, et al */
++	uint32	xmtaddr;			/* descriptor ring base address (4K aligned) */
++	uint32	xmtptr;				/* last descriptor posted to chip */
++	uint32	xmtstatus;			/* current active descriptor, et al */
 +
-+/* tag_ID/length/value_buffer tuple */
-+typedef struct bcm_tlv {
-+	uint8	id;
-+	uint8	len;
-+	uint8	data[1];
-+} bcm_tlv_t;
++	/* receive channel */
++	uint32	rcvcontrol;			/* enable, et al */
++	uint32	rcvaddr;			/* descriptor ring base address (4K aligned) */
++	uint32	rcvptr;				/* last descriptor posted to chip */
++	uint32	rcvstatus;			/* current active descriptor, et al */
++} dmaregs_t;
 +
-+/* externs */
-+extern uint bcm_atoi(char *s);
-+extern uchar bcm_toupper(uchar c);
-+extern ulong bcm_strtoul(char *cp, char **endp, uint base);
-+extern void deadbeef(char *p, uint len);
-+extern void prhex(char *msg, uchar *buf, uint len);
-+extern void prpkt(char *msg, void *drv, void *p0);
-+extern uint pktcopy(void *drv, void *p, uint offset, int len, uchar *buf);
-+extern uint pkttotlen(void *drv, void *);
-+extern uchar *bcm_ether_ntoa(char *ea, char *buf);
-+extern int bcm_ether_atoe(char *p, char *ea);
-+extern void bcm_mdelay(uint ms);
-+extern char *getvar(char *vars, char *name);
-+extern int getintvar(char *vars, char *name);
++typedef volatile struct {
++	/* diag access */
++	uint32	fifoaddr;			/* diag address */
++	uint32	fifodatalow;			/* low 32bits of data */
++	uint32	fifodatahigh;			/* high 32bits of data */
++	uint32	pad;				/* reserved */
++} dmafifo_t;
 +
-+extern uint8 crc8(uint8 *p, uint nbytes, uint8 crc);
-+extern uint16 crc16(uint8 *p, uint nbytes, uint16 crc);
-+extern uint32 crc32(uint8 *p, uint nbytes, uint32 crc);
-+extern bcm_tlv_t *bcm_parse_tlvs(void *buf, int buflen, uint key);
-+extern bcm_tlv_t *bcm_parse_ordered_tlvs(void *buf, int buflen, uint key);
-+extern void pktqinit(struct pktq *q, int maxlen);
-+extern void pktenq(struct pktq *q, void *p, bool lifo);
-+extern void *pktdeq(struct pktq *q);
++/* transmit channel control */
++#define	XC_XE		((uint32)1 << 0)	/* transmit enable */
++#define	XC_SE		((uint32)1 << 1)	/* transmit suspend request */
++#define	XC_LE		((uint32)1 << 2)	/* loopback enable */
++#define	XC_FL		((uint32)1 << 4)	/* flush request */
 +
-+#define	bcmlog(fmt, a1, a2)
-+#define	bcmdumplog(buf, size)	*buf = '\0'
++/* transmit descriptor table pointer */
++#define	XP_LD_MASK	0xfff			/* last valid descriptor */
 +
-+#endif	/* _bcmutils_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/bitfuncs.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bitfuncs.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/bitfuncs.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/bitfuncs.h	2005-08-28 11:12:20.435858392 +0200
-@@ -0,0 +1,85 @@
-+/*
-+ * bit manipulation utility functions
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation   
-+ * All Rights Reserved.   
-+ *    
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
-+ * $Id$
-+ */
++/* transmit channel status */
++#define	XS_CD_MASK	0x0fff			/* current descriptor pointer */
++#define	XS_XS_MASK	0xf000			/* transmit state */
++#define	XS_XS_SHIFT	12
++#define	XS_XS_DISABLED	0x0000			/* disabled */
++#define	XS_XS_ACTIVE	0x1000			/* active */
++#define	XS_XS_IDLE	0x2000			/* idle wait */
++#define	XS_XS_STOPPED	0x3000			/* stopped */
++#define	XS_XS_SUSP	0x4000			/* suspend pending */
++#define	XS_XE_MASK	0xf0000			/* transmit errors */
++#define	XS_XE_SHIFT	16
++#define	XS_XE_NOERR	0x00000			/* no error */
++#define	XS_XE_DPE	0x10000			/* descriptor protocol error */
++#define	XS_XE_DFU	0x20000			/* data fifo underrun */
++#define	XS_XE_BEBR	0x30000			/* bus error on buffer read */
++#define	XS_XE_BEDA	0x40000			/* bus error on descriptor access */
++#define	XS_FL		((uint32)1 << 20)	/* flushed */
 +
-+#ifndef _BITFUNCS_H
-+#define _BITFUNCS_H
++/* receive channel control */
++#define	RC_RE		((uint32)1 << 0)	/* receive enable */
++#define	RC_RO_MASK	0xfe			/* receive frame offset */
++#define	RC_RO_SHIFT	1
++#define	RC_FM		((uint32)1 << 8)	/* direct fifo receive (pio) mode */
 +
-+#include <typedefs.h>
++/* receive descriptor table pointer */
++#define	RP_LD_MASK	0xfff			/* last valid descriptor */
 +
-+/* local prototypes */
-+static INLINE uint32 find_msbit(uint32 x);
++/* receive channel status */
++#define	RS_CD_MASK	0x0fff			/* current descriptor pointer */
++#define	RS_RS_MASK	0xf000			/* receive state */
++#define	RS_RS_SHIFT	12
++#define	RS_RS_DISABLED	0x0000			/* disabled */
++#define	RS_RS_ACTIVE	0x1000			/* active */
++#define	RS_RS_IDLE	0x2000			/* idle wait */
++#define	RS_RS_STOPPED	0x3000			/* reserved */
++#define	RS_RE_MASK	0xf0000			/* receive errors */
++#define	RS_RE_SHIFT	16
++#define	RS_RE_NOERR	0x00000			/* no error */
++#define	RS_RE_DPE	0x10000			/* descriptor protocol error */
++#define	RS_RE_DFO	0x20000			/* data fifo overflow */
++#define	RS_RE_BEBW	0x30000			/* bus error on buffer write */
++#define	RS_RE_BEDA	0x40000			/* bus error on descriptor access */
 +
++/* fifoaddr */
++#define	FA_OFF_MASK	0xffff			/* offset */
++#define	FA_SEL_MASK	0xf0000			/* select */
++#define	FA_SEL_SHIFT	16
++#define	FA_SEL_XDD	0x00000			/* transmit dma data */
++#define	FA_SEL_XDP	0x10000			/* transmit dma pointers */
++#define	FA_SEL_RDD	0x40000			/* receive dma data */
++#define	FA_SEL_RDP	0x50000			/* receive dma pointers */
++#define	FA_SEL_XFD	0x80000			/* transmit fifo data */
++#define	FA_SEL_XFP	0x90000			/* transmit fifo pointers */
++#define	FA_SEL_RFD	0xc0000			/* receive fifo data */
++#define	FA_SEL_RFP	0xd0000			/* receive fifo pointers */
 +
 +/*
-+ * find_msbit: returns index of most significant set bit in x, with index
-+ *   range defined as 0-31.  NOTE: returns zero if input is zero.
++ * DMA Descriptor
++ * Descriptors are only read by the hardware, never written back.
 + */
-+
-+#if defined(USE_PENTIUM_BSR) && defined(__GNUC__)
++typedef volatile struct {
++	uint32	ctrl;		/* misc control bits & bufcount */
++	uint32	addr;		/* data buffer address */
++} dmadd_t;
 +
 +/*
-+ * Implementation for Pentium processors and gcc.  Note that this
-+ * instruction is actually very slow on some processors (e.g., family 5,
-+ * model 2, stepping 12, "Pentium 75 - 200"), so we use the generic
-+ * implementation instead.
++ * Each descriptor ring must be 4096byte aligned
++ * and fit within a single 4096byte page.
 + */
-+static INLINE uint32 find_msbit(uint32 x)
-+{
-+	uint msbit;
-+        __asm__("bsrl %1,%0"
-+                :"=r" (msbit)
-+                :"r" (x));
-+        return msbit;
-+}
++#define	DMAMAXRINGSZ	4096
++#define	DMARINGALIGN	4096
 +
-+#else
++/* control flags */
++#define	CTRL_BC_MASK	0x1fff			/* buffer byte count */
++#define	CTRL_EOT	((uint32)1 << 28)	/* end of descriptor table */
++#define	CTRL_IOC	((uint32)1 << 29)	/* interrupt on completion */
++#define	CTRL_EOF	((uint32)1 << 30)	/* end of frame */
++#define	CTRL_SOF	((uint32)1 << 31)	/* start of frame */
 +
-+/*
-+ * Generic Implementation
-+ */
++/* control flags in the range [27:20] are core-specific and not defined here */
++#define	CTRL_CORE_MASK	0x0ff00000
 +
-+#define DB_POW_MASK16	0xffff0000
-+#define DB_POW_MASK8	0x0000ff00
-+#define DB_POW_MASK4	0x000000f0
-+#define DB_POW_MASK2	0x0000000c
-+#define DB_POW_MASK1	0x00000002
-+
-+static INLINE uint32 find_msbit(uint32 x)
-+{
-+	uint32 temp_x = x;
-+	uint msbit = 0;
-+	if (temp_x & DB_POW_MASK16) {
-+		temp_x >>= 16;
-+		msbit = 16;
-+	}
-+	if (temp_x & DB_POW_MASK8) {
-+		temp_x >>= 8;
-+		msbit += 8;
-+	}
-+	if (temp_x & DB_POW_MASK4) {
-+		temp_x >>= 4;
-+		msbit += 4;
-+	}
-+	if (temp_x & DB_POW_MASK2) {
-+		temp_x >>= 2;
-+		msbit += 2;
-+	}
-+	if (temp_x & DB_POW_MASK1) {
-+		msbit += 1;
-+	}
-+	return(msbit);
-+}
++/* export structure */
++typedef volatile struct {
++	/* rx error counters */
++	uint		rxgiants;	/* rx giant frames */
++	uint		rxnobuf;	/* rx out of dma descriptors */
++	/* tx error counters */
++	uint		txnobuf;	/* tx out of dma descriptors */
++} hnddma_t;
 +
++#ifndef di_t
++#define	di_t	void
 +#endif
 +
-+#endif /* _BITFUNCS_H */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/epivers.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/epivers.h	2005-08-28 11:12:20.435858392 +0200
-@@ -0,0 +1,69 @@
++/* externs */
++extern void *dma_attach(void *drv, void *dev, char *name, dmaregs_t *dmaregs,
++	uint ntxd, uint nrxd, uint rxbufsize, uint nrxpost, uint rxoffset,
++	uint ddoffset, uint dataoffset, uint *msg_level);
++extern void dma_detach(di_t *di);
++extern void dma_txreset(di_t *di);
++extern void dma_rxreset(di_t *di);
++extern void dma_txinit(di_t *di);
++extern bool dma_txenabled(di_t *di);
++extern void dma_rxinit(di_t *di);
++extern void dma_rxenable(di_t *di);
++extern bool dma_rxenabled(di_t *di);
++extern void dma_txsuspend(di_t *di);
++extern void dma_txresume(di_t *di);
++extern bool dma_txsuspended(di_t *di);
++extern bool dma_txstopped(di_t *di);
++extern bool dma_rxstopped(di_t *di);
++extern int dma_txfast(di_t *di, void *p, uint32 coreflags);
++extern int dma_tx(di_t *di, void *p, uint32 coreflags);
++extern void dma_fifoloopbackenable(di_t *di);
++extern void *dma_rx(di_t *di);
++extern void dma_rxfill(di_t *di);
++extern void dma_txreclaim(di_t *di, bool forceall);
++extern void dma_rxreclaim(di_t *di);
++extern char *dma_dump(di_t *di, char *buf);
++extern char *dma_dumptx(di_t *di, char *buf);
++extern char *dma_dumprx(di_t *di, char *buf);
++extern uint dma_getvar(di_t *di, char *name);
++extern void *dma_getnexttxp(di_t *di, bool forceall);
++extern void *dma_getnextrxp(di_t *di, bool forceall);
++extern void dma_txblock(di_t *di);
++extern void dma_txunblock(di_t *di);
++extern uint dma_txactive(di_t *di);
++
++#endif	/* _hnddma_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/hndmips.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/hndmips.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/hndmips.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/hndmips.h	2005-09-16 10:29:18.188589816 +0200
+@@ -0,0 +1,16 @@
 +/*
++ * Alternate include file for HND sbmips.h since CFE also ships with
++ * a sbmips.h.
++ *
 + * Copyright 2001-2003, Broadcom Corporation
 + * All Rights Reserved.
 + * 
@@ -8959,70 +7903,16 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h linux-2.6.12.5-brc
 + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
 + *
 + * $Id$
-+ *
-+*/
-+
-+#ifndef _epivers_h_
-+#define _epivers_h_
-+
-+#ifdef	linux
-+#include <linux/config.h>
-+#endif
-+
-+/* Vendor Name, ASCII, 32 chars max */
-+#ifdef COMPANYNAME
-+#define	HPNA_VENDOR 		COMPANYNAME
-+#else
-+#define	HPNA_VENDOR 		"Broadcom Corporation"
-+#endif
-+
-+/* Driver Date, ASCII, 32 chars max */
-+#define HPNA_DRV_BUILD_DATE	__DATE__
-+
-+/* Hardware Manufacture Date, ASCII, 32 chars max */
-+#define HPNA_HW_MFG_DATE	"Not Specified"
-+
-+/* See documentation for Device Type values, 32 values max */
-+#ifndef	HPNA_DEV_TYPE
-+
-+#if	defined(CONFIG_BRCM_VJ)
-+#define HPNA_DEV_TYPE		{ CDCF_V0_DEVICE_DISPLAY }
-+
-+#elif	defined(CONFIG_BCRM_93725)
-+#define HPNA_DEV_TYPE		{ CDCF_V0_DEVICE_CM_BRIDGE, CDCF_V0_DEVICE_DISPLAY }
-+
-+#else
-+#define HPNA_DEV_TYPE		{ CDCF_V0_DEVICE_PCINIC }
-+
-+#endif
-+
-+#endif	/* !HPNA_DEV_TYPE */
-+
-+
-+#define	EPI_MAJOR_VERSION	1
-+
-+#define	EPI_MINOR_VERSION	1
-+
-+#define	EPI_RC_NUMBER		2
-+
-+#define	EPI_INCREMENTAL_NUMBER	0
-+
-+#define	EPI_BUILD_NUMBER	0
-+
-+#define	EPI_VERSION		1,1,2,0
-+
-+#define	EPI_VERSION_NUM		0x01010200
-+
-+/* Driver Version String, ASCII, 32 chars max */
-+#define	EPI_VERSION_STR		"1.1.2.0"
-+#define	EPI_ROUTER_VERSION_STR	"1.1.2.0"
++ */
 +
-+#endif /* _epivers_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h.in linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/epivers.h.in
---- linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h.in	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/epivers.h.in	2005-08-28 11:12:20.436858240 +0200
-@@ -0,0 +1,69 @@
++#include "sbmips.h"
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/linux_osl.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/linux_osl.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/linux_osl.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/linux_osl.h	2005-09-16 10:29:18.190589512 +0200
+@@ -0,0 +1,313 @@
 +/*
++ * Linux OS Independent Layer
++ *
 + * Copyright 2001-2003, Broadcom Corporation
 + * All Rights Reserved.
 + * 
@@ -9032,135 +7922,314 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/epivers.h.in linux-2.6.12.5-
 + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
 + *
 + * $Id$
-+ *
-+*/
-+
-+#ifndef _epivers_h_
-+#define _epivers_h_
++ */
 +
-+#ifdef	linux
-+#include <linux/config.h>
-+#endif
++#ifndef _linux_osl_h_
++#define _linux_osl_h_
 +
-+/* Vendor Name, ASCII, 32 chars max */
-+#ifdef COMPANYNAME
-+#define	HPNA_VENDOR 		COMPANYNAME
-+#else
-+#define	HPNA_VENDOR 		"Broadcom Corporation"
-+#endif
++#include <typedefs.h>
 +
-+/* Driver Date, ASCII, 32 chars max */
-+#define HPNA_DRV_BUILD_DATE	__DATE__
++/* use current 2.4.x calling conventions */
++#include <linuxver.h>
 +
-+/* Hardware Manufacture Date, ASCII, 32 chars max */
-+#define HPNA_HW_MFG_DATE	"Not Specified"
++/* assert and panic */
++#define	ASSERT(exp)		do {} while (0)
 +
-+/* See documentation for Device Type values, 32 values max */
-+#ifndef	HPNA_DEV_TYPE
++/* PCMCIA attribute space access macros */
++#define	OSL_PCMCIA_READ_ATTR(osh, offset, buf, size) \
++	osl_pcmcia_read_attr((osh), (offset), (buf), (size))
++#define	OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size) \
++	osl_pcmcia_write_attr((osh), (offset), (buf), (size))
++extern void osl_pcmcia_read_attr(void *osh, uint offset, void *buf, int size);
++extern void osl_pcmcia_write_attr(void *osh, uint offset, void *buf, int size);
 +
-+#if	defined(CONFIG_BRCM_VJ)
-+#define HPNA_DEV_TYPE		{ CDCF_V0_DEVICE_DISPLAY }
++/* PCI configuration space access macros */
++#define	OSL_PCI_READ_CONFIG(loc, offset, size) \
++	osl_pci_read_config((loc), (offset), (size))
++#define	OSL_PCI_WRITE_CONFIG(loc, offset, size, val) \
++	osl_pci_write_config((loc), (offset), (size), (val))
++extern uint32 osl_pci_read_config(void *loc, uint size, uint offset);
++extern void osl_pci_write_config(void *loc, uint offset, uint size, uint val);
 +
-+#elif	defined(CONFIG_BCRM_93725)
-+#define HPNA_DEV_TYPE		{ CDCF_V0_DEVICE_CM_BRIDGE, CDCF_V0_DEVICE_DISPLAY }
++/* OSL initialization */
++#define osl_init()		do {} while (0)
 +
-+#else
-+#define HPNA_DEV_TYPE		{ CDCF_V0_DEVICE_PCINIC }
++/* host/bus architecture-specific byte swap */
++#define BUS_SWAP32(v)		(v)
 +
-+#endif
++/*
++ * BINOSL selects the slightly slower function-call-based binary compatible osl.
++ * Macros expand to calls to functions defined in linux_osl.c .
++ */
++#ifndef BINOSL
 +
-+#endif	/* !HPNA_DEV_TYPE */
++/* string library, kernel mode */
++#define	printf(fmt, args...)	printk(fmt, ## args)
++#include <linux/kernel.h>
++#include <linux/string.h>
 +
++/* register access macros */
++#define R_REG(r) ({ \
++	__typeof(*(r)) __osl_v; \
++	switch (sizeof(*(r))) { \
++	case sizeof(uint8):	__osl_v = readb((volatile uint8*)(r)); break; \
++	case sizeof(uint16):	__osl_v = readw((volatile uint16*)(r)); break; \
++	case sizeof(uint32):	__osl_v = readl((volatile uint32*)(r)); break; \
++	} \
++	__osl_v; \
++})
++#define W_REG(r, v) do { \
++	switch (sizeof(*(r))) { \
++	case sizeof(uint8):	writeb((uint8)(v), (volatile uint8*)(r)); break; \
++	case sizeof(uint16):	writew((uint16)(v), (volatile uint16*)(r)); break; \
++	case sizeof(uint32):	writel((uint32)(v), (volatile uint32*)(r)); break; \
++	} \
++} while (0)
 +
-+#define	EPI_MAJOR_VERSION	@EPI_MAJOR_VERSION@
++#define	AND_REG(r, v)		W_REG((r), R_REG(r) & (v))
++#define	OR_REG(r, v)		W_REG((r), R_REG(r) | (v))
 +
-+#define	EPI_MINOR_VERSION	@EPI_MINOR_VERSION@
++/* bcopy, bcmp, and bzero */
++#define	bcopy(src, dst, len)	memcpy((dst), (src), (len))
++#define	bcmp(b1, b2, len)	memcmp((b1), (b2), (len))
++#define	bzero(b, len)		memset((b), '\0', (len))
 +
-+#define	EPI_RC_NUMBER		@EPI_RC_NUMBER@
++/* general purpose memory allocation */
++#define	MALLOC(size)		kmalloc((size), GFP_ATOMIC)
++#define	MFREE(addr, size)	kfree((addr))
 +
-+#define	EPI_INCREMENTAL_NUMBER	@EPI_INCREMENTAL_NUMBER@
++/* uncached virtual address */
++#ifdef mips
++#define OSL_UNCACHED(va)	KSEG1ADDR((va))
++#include <asm/addrspace.h>
++#else
++#define OSL_UNCACHED(va)	(va)
++#endif
 +
-+#define	EPI_BUILD_NUMBER	@EPI_BUILD_NUMBER@
++/* get processor cycle count */
++#if defined(mips)
++#define	OSL_GETCYCLES(x)	((x) = read_c0_count() * 2)
++#elif defined(__i386__)
++#define	OSL_GETCYCLES(x)	rdtscl((x))
++#else
++#define OSL_GETCYCLES(x)	((x) = 0)
++#endif
 +
-+#define	EPI_VERSION		@EPI_VERSION@
++/* dereference an address that may cause a bus exception */
++#ifdef mips
++#if defined(MODULE) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,17))
++#define BUSPROBE(val, addr)	panic("get_dbe() will not fixup a bus exception when compiled into a module")
++#else
++#define	BUSPROBE(val, addr)	get_dbe((val), (addr))
++#include <asm/paccess.h>
++#endif
++#else
++#define	BUSPROBE(val, addr)	({ (val) = R_REG((addr)); 0; })
++#endif
 +
-+#define	EPI_VERSION_NUM		@EPI_VERSION_NUM@
++/* map/unmap physical to virtual I/O */
++#define	REG_MAP(pa, size)	ioremap_nocache((unsigned long)(pa), (unsigned long)(size))
++#define	REG_UNMAP(va)		iounmap((void *)(va))
 +
-+/* Driver Version String, ASCII, 32 chars max */
-+#define	EPI_VERSION_STR		"@EPI_VERSION_STR@"
-+#define	EPI_ROUTER_VERSION_STR	"@EPI_ROUTER_VERSION_STR@"
++/* allocate/free shared (dma-able) consistent (uncached) memory */
++#define	DMA_ALLOC_CONSISTENT(dev, size, pap) \
++	pci_alloc_consistent((dev), (size), (dma_addr_t*)(pap))
++#define	DMA_FREE_CONSISTENT(dev, va, size, pa) \
++	pci_free_consistent((dev), (size), (va), (dma_addr_t)(pa))
 +
-+#endif /* _epivers_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/etsockio.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/etsockio.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/etsockio.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/etsockio.h	2005-08-28 11:12:20.436858240 +0200
-@@ -0,0 +1,60 @@
-+/*
-+ * Driver-specific socket ioctls
-+ * used by BSD, Linux, and PSOS
-+ * Broadcom BCM44XX 10/100Mbps Ethernet Device Driver
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation   
-+ * All Rights Reserved.   
-+ *    
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
-+ *
-+ * $Id$
-+ */
-+
-+#ifndef _etsockio_h_
-+#define _etsockio_h_
++/* map/unmap direction */
++#define	DMA_TX			PCI_DMA_TODEVICE
++#define	DMA_RX			PCI_DMA_FROMDEVICE
 +
-+/* THESE MUST BE CONTIGUOUS AND CONSISTENT WITH VALUES IN ETC.H */
++/* map/unmap shared (dma-able) memory */
++#define	DMA_MAP(dev, va, size, direction, p) \
++	pci_map_single((dev), (va), (size), (direction))
++#define	DMA_UNMAP(dev, pa, size, direction, p) \
++	pci_unmap_single((dev), (dma_addr_t)(pa), (size), (direction))
 +
++/* microsecond delay */
++#define	OSL_DELAY(usec)		udelay(usec)
++#include <linux/delay.h>
++#define OSL_SLEEP(usec) set_current_state(TASK_INTERRUPTIBLE); \
++                        schedule_timeout((usec*HZ)/1000000);
++#define OSL_IN_INTERRUPT() in_interrupt()
 +
-+#if defined(linux)
-+#define SIOCSETCUP		(SIOCDEVPRIVATE + 0)
-+#define SIOCSETCDOWN		(SIOCDEVPRIVATE + 1)
-+#define SIOCSETCLOOP		(SIOCDEVPRIVATE + 2)
-+#define SIOCGETCDUMP		(SIOCDEVPRIVATE + 3)
-+#define SIOCSETCSETMSGLEVEL	(SIOCDEVPRIVATE + 4)
-+#define SIOCSETCPROMISC		(SIOCDEVPRIVATE + 5)
-+#define SIOCSETCTXDOWN		(SIOCDEVPRIVATE + 6)	/* obsolete */
-+#define SIOCSETCSPEED		(SIOCDEVPRIVATE + 7)
-+#define SIOCTXGEN		(SIOCDEVPRIVATE + 8)
-+#define SIOCGETCPHYRD		(SIOCDEVPRIVATE + 9)
-+#define SIOCSETCPHYWR		(SIOCDEVPRIVATE + 10)
-+#define SIOCPERF		    (SIOCDEVPRIVATE + 11)
-+#define SIOCPERFDMA		    (SIOCDEVPRIVATE + 12)
++/* shared (dma-able) memory access macros */
++#define	R_SM(r)			*(r)
++#define	W_SM(r, v)		(*(r) = (v))
++#define	BZERO_SM(r, len)	memset((r), '\0', (len))
 +
-+#else	/* !linux */
++/* packet primitives */
++#define	PKTGET(drv, len, send)		osl_pktget((drv), (len), (send))
++#define	PKTFREE(drv, skb, send)		osl_pktfree((skb))
++#define	PKTDATA(drv, skb)		(((struct sk_buff*)(skb))->data)
++#define	PKTLEN(drv, skb)		(((struct sk_buff*)(skb))->len)
++#define PKTHEADROOM(drv, skb)		(PKTDATA(drv,skb)-(((struct sk_buff*)(skb))->head))
++#define PKTTAILROOM(drv, skb)		((((struct sk_buff*)(skb))->end)-(((struct sk_buff*)(skb))->tail))
++#define	PKTNEXT(drv, skb)		(((struct sk_buff*)(skb))->next)
++#define	PKTSETNEXT(skb, x)		(((struct sk_buff*)(skb))->next = (struct sk_buff*)(x))
++#define	PKTSETLEN(drv, skb, len)	__skb_trim((struct sk_buff*)(skb), (len))
++#define	PKTPUSH(drv, skb, bytes)	skb_push((struct sk_buff*)(skb), (bytes))
++#define	PKTPULL(drv, skb, bytes)	skb_pull((struct sk_buff*)(skb), (bytes))
++#define	PKTDUP(drv, skb)		skb_clone((struct sk_buff*)(skb), GFP_ATOMIC)
++#define	PKTCOOKIE(skb)			((void*)((struct sk_buff*)(skb))->csum)
++#define	PKTSETCOOKIE(skb, x)		(((struct sk_buff*)(skb))->csum = (uint)(x))
++#define	PKTLINK(skb)			(((struct sk_buff*)(skb))->prev)
++#define	PKTSETLINK(skb, x)		(((struct sk_buff*)(skb))->prev = (struct sk_buff*)(x))
++extern void *osl_pktget(void *drv, uint len, bool send);
++extern void osl_pktfree(void *skb);
 +
-+#define SIOCSETCUP		_IOWR('e', 130 + 0, struct ifreq)
-+#define SIOCSETCDOWN		_IOWR('e', 130 + 1, struct ifreq)
-+#define SIOCSETCLOOP		_IOWR('e', 130 + 2, struct ifreq)
-+#define SIOCGETCDUMP		_IOWR('e', 130 + 3, struct ifreq)
-+#define SIOCSETCSETMSGLEVEL	_IOWR('e', 130 + 4, struct ifreq)
-+#define SIOCSETCPROMISC		_IOWR('e', 130 + 5, struct ifreq)
-+#define SIOCSETCTXDOWN		_IOWR('e', 130 + 6, struct ifreq)	/* obsolete */
-+#define SIOCSETCSPEED		_IOWR('e', 130 + 7, struct ifreq)
-+#define SIOCTXGEN		_IOWR('e', 130 + 8, struct ifreq)
++#else	/* BINOSL */                                    
 +
++/* string library */
++#ifndef LINUX_OSL
++#undef printf
++#define	printf(fmt, args...)		osl_printf((fmt), ## args)
++#undef sprintf
++#define sprintf(buf, fmt, args...)	osl_sprintf((buf), (fmt), ## args)
++#undef strcmp
++#define	strcmp(s1, s2)			osl_strcmp((s1), (s2))
++#undef strncmp
++#define	strncmp(s1, s2, n)		osl_strncmp((s1), (s2), (n))
++#undef strlen
++#define strlen(s)			osl_strlen((s))
++#undef strcpy
++#define	strcpy(d, s)			osl_strcpy((d), (s))
++#undef strncpy
++#define	strncpy(d, s, n)		osl_strncpy((d), (s), (n))
 +#endif
++extern int osl_printf(const char *format, ...);
++extern int osl_sprintf(char *buf, const char *format, ...);
++extern int osl_strcmp(const char *s1, const char *s2);
++extern int osl_strncmp(const char *s1, const char *s2, uint n);
++extern int osl_strlen(char *s);
++extern char* osl_strcpy(char *d, const char *s);
++extern char* osl_strncpy(char *d, const char *s, uint n);
 +
-+/* arg to SIOCTXGEN */
-+struct txg {
-+	uint32 num;		/* number of frames to send */
-+	uint32 delay;		/* delay in microseconds between sending each */
-+	uint32 size;		/* size of ether frame to send */
-+	uchar buf[1514];	/* starting ether frame data */
-+};
++/* register access macros */
++#define R_REG(r) ({ \
++	__typeof(*(r)) __osl_v; \
++	switch (sizeof(*(r))) { \
++	case sizeof(uint8):	__osl_v = osl_readb((volatile uint8*)(r)); break; \
++	case sizeof(uint16):	__osl_v = osl_readw((volatile uint16*)(r)); break; \
++	case sizeof(uint32):	__osl_v = osl_readl((volatile uint32*)(r)); break; \
++	} \
++	__osl_v; \
++})
++#define W_REG(r, v) do { \
++	switch (sizeof(*(r))) { \
++	case sizeof(uint8):	osl_writeb((uint8)(v), (volatile uint8*)(r)); break; \
++	case sizeof(uint16):	osl_writew((uint16)(v), (volatile uint16*)(r)); break; \
++	case sizeof(uint32):	osl_writel((uint32)(v), (volatile uint32*)(r)); break; \
++	} \
++} while (0)
++#define	AND_REG(r, v)		W_REG((r), R_REG(r) & (v))
++#define	OR_REG(r, v)		W_REG((r), R_REG(r) | (v))
++extern uint8 osl_readb(volatile uint8 *r);
++extern uint16 osl_readw(volatile uint16 *r);
++extern uint32 osl_readl(volatile uint32 *r);
++extern void osl_writeb(uint8 v, volatile uint8 *r);
++extern void osl_writew(uint16 v, volatile uint16 *r);
++extern void osl_writel(uint32 v, volatile uint32 *r);
 +
-+#endif
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/flash.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/flash.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/flash.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/flash.h	2005-08-28 11:12:20.437858088 +0200
-@@ -0,0 +1,184 @@
++/* bcopy, bcmp, and bzero */
++extern void bcopy(const void *src, void *dst, int len);
++extern int bcmp(const void *b1, const void *b2, int len);
++extern void bzero(void *b, int len);
++
++/* general purpose memory allocation */
++#define	MALLOC(size)		osl_malloc((size))
++#define	MFREE(addr, size)	osl_mfree((char*)(addr), (size))
++extern void *osl_malloc(uint size);
++extern void osl_mfree(void *addr, uint size);
++
++/* uncached virtual address */
++#define OSL_UNCACHED(va)	osl_uncached((va))
++extern void *osl_uncached(void *va);
++
++/* get processor cycle count */
++#define OSL_GETCYCLES(x)	((x) = osl_getcycles())
++extern uint osl_getcycles(void);
++
++/* dereference an address that may target abort */
++#define	BUSPROBE(val, addr)	osl_busprobe(&(val), (addr))
++extern int osl_busprobe(uint32 *val, uint32 addr);
++
++/* map/unmap physical to virtual */
++#define	REG_MAP(pa, size)	osl_reg_map((pa), (size))
++#define	REG_UNMAP(va)		osl_reg_unmap((va))
++extern void *osl_reg_map(uint32 pa, uint size);
++extern void osl_reg_unmap(void *va);
++
++/* allocate/free shared (dma-able) consistent (uncached) memory */
++#define	DMA_ALLOC_CONSISTENT(dev, size, pap) \
++	osl_dma_alloc_consistent((dev), (size), (pap))
++#define	DMA_FREE_CONSISTENT(dev, va, size, pa) \
++	osl_dma_free_consistent((dev), (void*)(va), (size), (pa))
++extern void *osl_dma_alloc_consistent(void *dev, uint size, ulong *pap);
++extern void osl_dma_free_consistent(void *dev, void *va, uint size, ulong pa);
++
++/* map/unmap direction */
++#define	DMA_TX	1
++#define	DMA_RX	2
++
++/* map/unmap shared (dma-able) memory */
++#define	DMA_MAP(dev, va, size, direction, p) \
++	osl_dma_map((dev), (va), (size), (direction))
++#define	DMA_UNMAP(dev, pa, size, direction, p) \
++	osl_dma_unmap((dev), (pa), (size), (direction))
++extern uint osl_dma_map(void *dev, void *va, uint size, int direction);
++extern void osl_dma_unmap(void *dev, uint pa, uint size, int direction);
++
++/* microsecond delay */
++#define	OSL_DELAY(usec)		osl_delay((usec))
++extern void osl_delay(uint usec);
++
++/* shared (dma-able) memory access macros */
++#define	R_SM(r)			*(r)
++#define	W_SM(r, v)		(*(r) = (v))
++#define	BZERO_SM(r, len)	bzero((r), (len))
++
++/* packet primitives */
++#define	PKTGET(drv, len, send)		osl_pktget((drv), (len), (send))
++#define	PKTFREE(drv, skb, send)		osl_pktfree((skb))
++#define	PKTDATA(drv, skb)		osl_pktdata((drv), (skb))
++#define	PKTLEN(drv, skb)		osl_pktlen((drv), (skb))
++#define	PKTNEXT(drv, skb)		osl_pktnext((drv), (skb))
++#define	PKTSETNEXT(skb, x)		osl_pktsetnext((skb), (x))
++#define	PKTSETLEN(drv, skb, len)	osl_pktsetlen((drv), (skb), (len))
++#define	PKTPUSH(drv, skb, bytes)	osl_pktpush((drv), (skb), (bytes))
++#define	PKTPULL(drv, skb, bytes)	osl_pktpull((drv), (skb), (bytes))
++#define	PKTDUP(drv, skb)		osl_pktdup((drv), (skb))
++#define	PKTCOOKIE(skb)			osl_pktcookie((skb))
++#define	PKTSETCOOKIE(skb, x)		osl_pktsetcookie((skb), (x))
++#define	PKTLINK(skb)			osl_pktlink((skb))
++#define	PKTSETLINK(skb, x)		osl_pktsetlink((skb), (x))
++extern void *osl_pktget(void *drv, uint len, bool send);
++extern void osl_pktfree(void *skb);
++extern uchar *osl_pktdata(void *drv, void *skb);
++extern uint osl_pktlen(void *drv, void *skb);
++extern void *osl_pktnext(void *drv, void *skb);
++extern void osl_pktsetnext(void *skb, void *x);
++extern void osl_pktsetlen(void *drv, void *skb, uint len);
++extern uchar *osl_pktpush(void *drv, void *skb, int bytes);
++extern uchar *osl_pktpull(void *drv, void *skb, int bytes);
++extern void *osl_pktdup(void *drv, void *skb);
++extern void *osl_pktcookie(void *skb);
++extern void osl_pktsetcookie(void *skb, void *x);
++extern void *osl_pktlink(void *skb);
++extern void osl_pktsetlink(void *skb, void *x);
++
++#endif	/* BINOSL */
++
++#endif	/* _linux_osl_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/linuxver.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/linuxver.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/linuxver.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/linuxver.h	2005-09-16 10:29:18.191589360 +0200
+@@ -0,0 +1,326 @@
 +/*
-+ * flash.h: Common definitions for flash access.
++ * Linux-specific abstractions to gain some independence from linux kernel versions.
++ * Pave over some 2.2 versus 2.4 kernel differences.
 + *
 + * Copyright 2001-2003, Broadcom Corporation   
 + * All Rights Reserved.   
@@ -9169,410 +8238,328 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/flash.h linux-2.6.12.5-brcm/
 + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
 + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
 + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
-+ *
 + * $Id$
 + */
 +
-+/* Types of flashes we know about */
-+typedef enum _flash_type {OLD, BSC, SCS, AMD, SST} flash_type_t;
++#ifndef _linuxver_h_
++#define _linuxver_h_
 +
-+/* Commands to write/erase the flases */
-+typedef struct _flash_cmds{
-+	flash_type_t	type;
-+	bool		need_unlock;
-+	uint16		pre_erase;
-+	uint16		erase_block;
-+	uint16		erase_chip;
-+	uint16		write_word;
-+	uint16		write_buf;
-+	uint16		clear_csr;
-+	uint16		read_csr;
-+	uint16		read_id;
-+	uint16		confirm;
-+	uint16		read_array;
-+} flash_cmds_t;
-+
-+#define	UNLOCK_CMD_WORDS	2
-+
-+typedef struct _unlock_cmd {
-+  uint		addr[UNLOCK_CMD_WORDS];
-+  uint16	cmd[UNLOCK_CMD_WORDS];
-+} unlock_cmd_t;
-+
-+/* Flash descriptors */
-+typedef struct _flash_desc {
-+	uint16		mfgid;		/* Manufacturer Id */
-+	uint16		devid;		/* Device Id */
-+	uint		size;		/* Total size in bytes */
-+	uint		width;		/* Device width in bytes */
-+	flash_type_t	type;		/* Device type old, S, J */
-+	uint		bsize;		/* Block size */
-+	uint		nb;		/* Number of blocks */
-+	uint		ff;		/* First full block */
-+	uint		lf;		/* Last full block */
-+	uint		nsub;		/* Number of subblocks */
-+	uint		*subblocks;	/* Offsets for subblocks */
-+	char		*desc;		/* Description */
-+} flash_desc_t;
-+
-+
-+#ifdef	DECLARE_FLASHES
-+
-+flash_cmds_t flash_cmds[] = {
-+/*	  type	needu	preera	eraseb	erasech	write	wbuf	clcsr	rdcsr	rdid	confrm	read */
-+	{ BSC,	0,	0x00,	0x20,	0x00,	0x40,	0x00,	0x50,	0x70,	0x90,	0xd0,	0xff },
-+	{ SCS,	0,	0x00,	0x20,	0x00,	0x40,	0xe8,	0x50,	0x70,	0x90,	0xd0,	0xff },
-+	{ AMD,	1,	0x80,	0x30,	0x10,	0xa0,	0x00,	0x00,	0x00,	0x90,	0x00,	0xf0 },
-+	{ SST,	1,	0x80,	0x50,	0x10,	0xa0,	0x00,	0x00,	0x00,	0x90,	0x00,	0xf0 },
-+	{ 0 }
-+};
++#include <linux/config.h>
++#include <linux/version.h>
 +
-+unlock_cmd_t unlock_cmd_amd = {
-+#ifdef MIPSEB
-+/* addr: */	{ 0x0aa8,	0x0556},
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0))
++/* __NO_VERSION__ must be defined for all linkables except one in 2.2 */
++#ifdef __UNDEF_NO_VERSION__
++#undef __NO_VERSION__
 +#else
-+/* addr: */	{ 0x0aaa,	0x0554},
++#define __NO_VERSION__
++#endif
 +#endif
-+/* data: */	{ 0xaa,		0x55}
-+};
 +
-+unlock_cmd_t unlock_cmd_sst = {
-+#ifdef MIPSEB
-+/* addr: */	{ 0xaaa8,	0x5556},
++#if defined(MODULE) && defined(MODVERSIONS)
++#include <linux/modversions.h>
++#endif
++
++/* linux/malloc.h is deprecated, use linux/slab.h instead. */
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,9))
++#include <linux/malloc.h>
 +#else
-+/* addr: */	{ 0xaaaa,	0x5554},
++#include <linux/slab.h>
 +#endif
-+/* data: */	{ 0xaa,		0x55}
-+};
 +
-+#define AMD_CMD 0xaaa
-+#define SST_CMD 0xaaaa
++#include <linux/types.h>
++#include <linux/init.h>
++#include <linux/module.h>
++#include <linux/mm.h>
++#include <linux/string.h>
++#include <linux/pci.h>
++#include <linux/interrupt.h>
++#include <linux/netdevice.h>
++#include <asm/io.h>
 +
-+/* intel unlock block cmds */
-+#define INTEL_UNLOCK1	0x60
-+#define INTEL_UNLOCK2	0xD0
++#ifndef __exit
++#define __exit
++#endif
++#ifndef __devexit
++#define __devexit
++#endif
++#ifndef __devinit
++#define __devinit	__init
++#endif
++#ifndef __devinitdata
++#define __devinitdata
++#endif
++#ifndef __devexit_p
++#define __devexit_p(x)	x
++#endif
 +
-+/* Just eight blocks of 8KB byte each */
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0))
 +
-+uint blk8x8k[] = { 0x00000000,
-+		   0x00002000,
-+		   0x00004000,
-+		   0x00006000,
-+		   0x00008000,
-+		   0x0000a000,
-+		   0x0000c000,
-+		   0x0000e000,
-+		   0x00010000
-+};
++#define pci_get_drvdata(dev)		(dev)->sysdata
++#define pci_set_drvdata(dev, value)	(dev)->sysdata=(value)
 +
-+/* Funky AMD arrangement for 29xx800's */
-+uint amd800[] = { 0x00000000,		/* 16KB */
-+		  0x00004000,		/* 32KB */
-+		  0x0000c000,		/* 8KB */
-+		  0x0000e000,		/* 8KB */
-+		  0x00010000,		/* 8KB */
-+		  0x00012000,		/* 8KB */
-+		  0x00014000,		/* 32KB */
-+		  0x0001c000,		/* 16KB */
-+		  0x00020000
-+};
++/*
++ * New-style (2.4.x) PCI/hot-pluggable PCI/CardBus registration
++ */
 +
-+/* AMD arrangement for 29xx160's */
-+uint amd4112[] = { 0x00000000,		/* 32KB */
-+		   0x00008000,		/* 8KB */
-+		   0x0000a000,		/* 8KB */
-+		   0x0000c000,		/* 16KB */
-+		   0x00010000
++struct pci_device_id {
++	unsigned int vendor, device;		/* Vendor and device ID or PCI_ANY_ID */
++	unsigned int subvendor, subdevice;	/* Subsystem ID's or PCI_ANY_ID */
++	unsigned int class, class_mask;		/* (class,subclass,prog-if) triplet */
++	unsigned long driver_data;		/* Data private to the driver */
 +};
-+uint amd2114[] = { 0x00000000,		/* 16KB */
-+		   0x00004000,		/* 8KB */
-+		   0x00006000,		/* 8KB */
-+		   0x00008000,		/* 32KB */
-+		   0x00010000
++
++struct pci_driver {
++	struct list_head node;
++	char *name;
++	const struct pci_device_id *id_table;	/* NULL if wants all devices */
++	int (*probe)(struct pci_dev *dev, const struct pci_device_id *id);	/* New device inserted */
++	void (*remove)(struct pci_dev *dev);	/* Device removed (NULL if not a hot-plug capable driver) */
++	void (*suspend)(struct pci_dev *dev);	/* Device suspended */
++	void (*resume)(struct pci_dev *dev);	/* Device woken up */
 +};
 +
++#define MODULE_DEVICE_TABLE(type, name)
++#define PCI_ANY_ID (~0)
 +
++/* compatpci.c */
++#define pci_module_init pci_register_driver
++extern int pci_register_driver(struct pci_driver *drv);
++extern void pci_unregister_driver(struct pci_driver *drv);
 +
-+flash_desc_t flashes[] = {
-+	{ 0x00b0, 0x00d0, 0x0200000, 2,	SCS, 0x10000, 32,  0, 31,  0, NULL,    "Intel 28F160S3/5 1Mx16" },
-+	{ 0x00b0, 0x00d4, 0x0400000, 2,	SCS, 0x10000, 64,  0, 63,  0, NULL,    "Intel 28F320S3/5 2Mx16" },
-+	{ 0x0089, 0x8890, 0x0200000, 2,	BSC, 0x10000, 32,  0, 30,  8, blk8x8k, "Intel 28F160B3 1Mx16 TopB" },
-+	{ 0x0089, 0x8891, 0x0200000, 2,	BSC, 0x10000, 32,  1, 31,  8, blk8x8k, "Intel 28F160B3 1Mx16 BotB" },
-+	{ 0x0089, 0x8896, 0x0400000, 2,	BSC, 0x10000, 64,  0, 62,  8, blk8x8k, "Intel 28F320B3 2Mx16 TopB" },
-+	{ 0x0089, 0x8897, 0x0400000, 2,	BSC, 0x10000, 64,  1, 63,  8, blk8x8k, "Intel 28F320B3 2Mx16 BotB" },
-+	{ 0x0089, 0x8898, 0x0800000, 2,	BSC, 0x10000, 128, 0, 126, 8, blk8x8k, "Intel 28F640B3 4Mx16 TopB" },
-+	{ 0x0089, 0x8899, 0x0800000, 2,	BSC, 0x10000, 128, 1, 127, 8, blk8x8k, "Intel 28F640B3 4Mx16 BotB" },
-+	{ 0x0089, 0x88C2, 0x0200000, 2,	BSC, 0x10000, 32,  0, 30,  8, blk8x8k, "Intel 28F160C3 1Mx16 TopB" },
-+	{ 0x0089, 0x88C3, 0x0200000, 2,	BSC, 0x10000, 32,  1, 31,  8, blk8x8k, "Intel 28F160C3 1Mx16 BotB" },
-+	{ 0x0089, 0x88C4, 0x0400000, 2,	BSC, 0x10000, 64,  0, 62,  8, blk8x8k, "Intel 28F320C3 2Mx16 TopB" },
-+	{ 0x0089, 0x88C5, 0x0400000, 2,	BSC, 0x10000, 64,  1, 63,  8, blk8x8k, "Intel 28F320C3 2Mx16 BotB" },
-+	{ 0x0089, 0x88CC, 0x0800000, 2,	BSC, 0x10000, 128, 0, 126, 8, blk8x8k, "Intel 28F640C3 4Mx16 TopB" },
-+	{ 0x0089, 0x88CD, 0x0800000, 2,	BSC, 0x10000, 128, 1, 127, 8, blk8x8k, "Intel 28F640C3 4Mx16 BotB" },
-+	{ 0x0089, 0x0014, 0x0400000, 2,	SCS, 0x20000, 32,  0, 31,  0, NULL,    "Intel 28F320J5 2Mx16" },
-+	{ 0x0089, 0x0015, 0x0800000, 2,	SCS, 0x20000, 64,  0, 63,  0, NULL,    "Intel 28F640J5 4Mx16" },
-+	{ 0x0089, 0x0016, 0x0400000, 2,	SCS, 0x20000, 32,  0, 31,  0, NULL,    "Intel 28F320J3 2Mx16" },
-+	{ 0x0089, 0x0017, 0x0800000, 2,	SCS, 0x20000, 64,  0, 63,  0, NULL,    "Intel 28F640J3 4Mx16" },
-+	{ 0x0089, 0x0018, 0x1000000, 2,	SCS, 0x20000, 128, 0, 127, 0, NULL,    "Intel 28F128J3 8Mx16" },
-+	{ 0x00b0, 0x00e3, 0x0400000, 2,	BSC, 0x10000, 64,  1, 63,  8, blk8x8k, "Sharp 28F320BJE 2Mx16 BotB" },
-+	{ 0x0001, 0x224a, 0x0100000, 2,	AMD, 0x10000, 16,  0, 13,  8, amd800,  "AMD 29DL800BT 512Kx16 TopB" },
-+	{ 0x0001, 0x22cb, 0x0100000, 2,	AMD, 0x10000, 16,  2, 15,  8, amd800,  "AMD 29DL800BB 512Kx16 BotB" },
-+	{ 0x0001, 0x22c4, 0x0200000, 2,	AMD, 0x10000, 32,  0, 30,  4, amd2114, "AMD 29lv160DT 1Mx16 TopB" },
-+	{ 0x0001, 0x2249, 0x0200000, 2,	AMD, 0x10000, 32,  1, 31,  4, amd4112, "AMD 29lv160DB 1Mx16 BotB" },
-+	{ 0x0001, 0x22f6, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  8, blk8x8k, "AMD 29lv320DT 2Mx16 TopB" },
-+	{ 0x0001, 0x22f9, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  8, blk8x8k, "AMD 29lv320DB 2Mx16 BotB" },
-+	{ 0x0001, 0x2201, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  8, blk8x8k, "AMD 29lv320MT 2Mx16 TopB" },
-+	{ 0x0001, 0x2200, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  8, blk8x8k, "AMD 29lv320MB 2Mx16 BotB" },
-+	{ 0x0020, 0x22CA, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  4, amd4112, "ST 29w320DT 2Mx16 TopB" },
-+	{ 0x0020, 0x22CB, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  4, amd2114, "ST 29w320DB 2Mx16 BotB" },
-+	{ 0x00C2, 0x00A7, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  4, amd4112, "MX29LV320T 2Mx16 TopB" },
-+	{ 0x00C2, 0x00A8, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  4, amd2114, "MX29LV320B 2Mx16 BotB" },
-+	{ 0x0004, 0x22F6, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  4, amd4112, "MBM29LV320TE 2Mx16 TopB" },
-+	{ 0x0004, 0x22F9, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  4, amd2114, "MBM29LV320BE 2Mx16 BotB" },
-+	{ 0x0098, 0x009A, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  4, amd4112, "TC58FVT321 2Mx16 TopB" },
-+	{ 0x0098, 0x009C, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  4, amd2114, "TC58FVB321 2Mx16 BotB" }, 
-+	{ 0x00C2, 0x22A7, 0x0400000, 2,	AMD, 0x10000, 64,  0, 62,  4, amd4112, "MX29LV320T 2Mx16 TopB" },
-+	{ 0x00C2, 0x22A8, 0x0400000, 2,	AMD, 0x10000, 64,  1, 63,  4, amd2114, "MX29LV320B 2Mx16 BotB" },
-+	{ 0x00BF, 0x2783, 0x0400000, 2,	SST, 0x10000, 64,  0, 63,  0, NULL,    "SST39VF320 2Mx16" },
-+	{ 0,      0,      0,         0,	OLD, 0,       0,   0, 0,   0, NULL,    NULL },
-+};
++#endif /* PCI registration */
 +
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18))
++#ifdef MODULE
++#define module_init(x) int init_module(void) { return x(); }
++#define module_exit(x) void cleanup_module(void) { x(); }
 +#else
++#define module_init(x)	__initcall(x);
++#define module_exit(x)	__exitcall(x);
++#endif
++#endif
 +
-+extern flash_cmds_t flash_cmds[];
-+extern unlock_cmd_t unlock_cmd;
-+extern flash_desc_t flashes[];
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,48))
++#define list_for_each(pos, head) \
++	for (pos = (head)->next; pos != (head); pos = pos->next)
++#endif
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,13))
++#define pci_resource_start(dev, bar)	((dev)->base_address[(bar)])
++#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,44))
++#define pci_resource_start(dev, bar)	((dev)->resource[(bar)].start)
++#endif
 +
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,23))
++#define pci_enable_device(dev) do { } while (0)
 +#endif
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/flashutl.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/flashutl.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/flashutl.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/flashutl.h	2005-08-28 11:12:20.437858088 +0200
-@@ -0,0 +1,34 @@
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,14))
++#define net_device device
++#endif
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,42))
++
 +/*
-+ * BCM47XX FLASH driver interface
++ * DMA mapping
 + *
-+ * Copyright 2001-2003, Broadcom Corporation   
-+ * All Rights Reserved.   
-+ *    
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
-+ * $Id$
++ * See linux/Documentation/DMA-mapping.txt
 + */
 +
-+#ifndef _flashutl_h_
-+#define _flashutl_h_
++#ifndef PCI_DMA_TODEVICE
++#define	PCI_DMA_TODEVICE	1
++#define	PCI_DMA_FROMDEVICE	2
++#endif
 +
-+#define FLASH_BASE      0xbfc00000		/* BCM4710 */
++typedef u32 dma_addr_t;
 +
-+int	flash_init(void* base_addr, char *flash_str);
-+int	flash_erase(void);
-+int	flash_eraseblk(unsigned long off);
-+int	flash_write(unsigned long off, uint16 *src, uint nbytes);
-+unsigned long	flash_block_base(unsigned long off);
-+unsigned long	flash_block_lim(unsigned long off);
-+int FlashWriteRange(unsigned short* dst, unsigned short* src, unsigned int numbytes);
++/* Pure 2^n version of get_order */
++static inline int get_order(unsigned long size)
++{
++	int order;
 +
-+void nvWrite(unsigned short *data, unsigned int len);
++	size = (size-1) >> (PAGE_SHIFT-1);
++	order = -1;
++	do {
++		size >>= 1;
++		order++;
++	} while (size);
++	return order;
++}
 +
-+/* Global vars */
-+extern char*		flashutl_base;
-+extern flash_desc_t*	flashutl_desc;
-+extern flash_cmds_t*	flashutl_cmd;
++static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
++					 dma_addr_t *dma_handle)
++{
++	void *ret;
++	int gfp = GFP_ATOMIC | GFP_DMA;
++
++	ret = (void *)__get_free_pages(gfp, get_order(size));
++
++	if (ret != NULL) {
++		memset(ret, 0, size);
++		*dma_handle = virt_to_bus(ret);
++	}
++	return ret;
++}
++static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size,
++				       void *vaddr, dma_addr_t dma_handle)
++{
++	free_pages((unsigned long)vaddr, get_order(size));
++}
++#ifdef ILSIM
++extern uint pci_map_single(void *dev, void *va, uint size, int direction);
++extern void pci_unmap_single(void *dev, uint pa, uint size, int direction);
++#else
++#define pci_map_single(cookie, address, size, dir)	virt_to_bus(address)
++#define pci_unmap_single(cookie, address, size, dir)
++#endif
++
++#endif /* DMA mapping */
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,43))
++
++#define dev_kfree_skb_any(a)		dev_kfree_skb(a)
++#define netif_down(dev)			do { (dev)->start = 0; } while(0)
++
++/* pcmcia-cs provides its own netdevice compatibility layer */
++#ifndef _COMPAT_NETDEVICE_H
 +
-+#endif /* _flashutl_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/hnddma.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/hnddma.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/hnddma.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/hnddma.h	2005-08-28 11:12:20.438857936 +0200
-@@ -0,0 +1,181 @@
 +/*
-+ * Generic Broadcom Home Networking Division (HND) DMA engine definitions.
-+ * This supports the following chips: BCM42xx, 44xx, 47xx .
++ * SoftNet
 + *
-+ * $Id$
-+ * Copyright 2001-2003, Broadcom Corporation   
-+ * All Rights Reserved.   
-+ *    
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
++ * For pre-softnet kernels we need to tell the upper layer not to
++ * re-enter start_xmit() while we are in there. However softnet
++ * guarantees not to enter while we are in there so there is no need
++ * to do the netif_stop_queue() dance unless the transmit queue really
++ * gets stuck. This should also improve performance according to tests
++ * done by Aman Singla.
 + */
 +
-+#ifndef	_hnddma_h_
-+#define	_hnddma_h_
++#define dev_kfree_skb_irq(a)		dev_kfree_skb(a)
++#define netif_wake_queue(dev)		do { clear_bit(0, &(dev)->tbusy); mark_bh(NET_BH); } while(0)
++#define netif_stop_queue(dev)		set_bit(0, &(dev)->tbusy)
 +
-+/*
-+ * Each DMA processor consists of a transmit channel and a receive channel.
-+ */
-+typedef volatile struct {
-+	/* transmit channel */
-+	uint32	xmtcontrol;			/* enable, et al */
-+	uint32	xmtaddr;			/* descriptor ring base address (4K aligned) */
-+	uint32	xmtptr;				/* last descriptor posted to chip */
-+	uint32	xmtstatus;			/* current active descriptor, et al */
++static inline void netif_start_queue(struct net_device *dev)
++{
++	dev->tbusy = 0;
++	dev->interrupt = 0;
++	dev->start = 1;
++}
 +
-+	/* receive channel */
-+	uint32	rcvcontrol;			/* enable, et al */
-+	uint32	rcvaddr;			/* descriptor ring base address (4K aligned) */
-+	uint32	rcvptr;				/* last descriptor posted to chip */
-+	uint32	rcvstatus;			/* current active descriptor, et al */
-+} dmaregs_t;
++#define netif_queue_stopped(dev)	(dev)->tbusy
++#define netif_running(dev)		(dev)->start
 +
-+typedef volatile struct {
-+	/* diag access */
-+	uint32	fifoaddr;			/* diag address */
-+	uint32	fifodatalow;			/* low 32bits of data */
-+	uint32	fifodatahigh;			/* high 32bits of data */
-+	uint32	pad;				/* reserved */
-+} dmafifo_t;
++#endif /* _COMPAT_NETDEVICE_H */
 +
-+/* transmit channel control */
-+#define	XC_XE		((uint32)1 << 0)	/* transmit enable */
-+#define	XC_SE		((uint32)1 << 1)	/* transmit suspend request */
-+#define	XC_LE		((uint32)1 << 2)	/* loopback enable */
-+#define	XC_FL		((uint32)1 << 4)	/* flush request */
++#define netif_device_attach(dev)	netif_start_queue(dev)
++#define netif_device_detach(dev)	netif_stop_queue(dev)
 +
-+/* transmit descriptor table pointer */
-+#define	XP_LD_MASK	0xfff			/* last valid descriptor */
++/* 2.4.x renamed bottom halves to tasklets */
++#define tasklet_struct				tq_struct
++static inline void tasklet_schedule(struct tasklet_struct *tasklet)
++{
++	queue_task(tasklet, &tq_immediate);
++	mark_bh(IMMEDIATE_BH);
++}
 +
-+/* transmit channel status */
-+#define	XS_CD_MASK	0x0fff			/* current descriptor pointer */
-+#define	XS_XS_MASK	0xf000			/* transmit state */
-+#define	XS_XS_SHIFT	12
-+#define	XS_XS_DISABLED	0x0000			/* disabled */
-+#define	XS_XS_ACTIVE	0x1000			/* active */
-+#define	XS_XS_IDLE	0x2000			/* idle wait */
-+#define	XS_XS_STOPPED	0x3000			/* stopped */
-+#define	XS_XS_SUSP	0x4000			/* suspend pending */
-+#define	XS_XE_MASK	0xf0000			/* transmit errors */
-+#define	XS_XE_SHIFT	16
-+#define	XS_XE_NOERR	0x00000			/* no error */
-+#define	XS_XE_DPE	0x10000			/* descriptor protocol error */
-+#define	XS_XE_DFU	0x20000			/* data fifo underrun */
-+#define	XS_XE_BEBR	0x30000			/* bus error on buffer read */
-+#define	XS_XE_BEDA	0x40000			/* bus error on descriptor access */
-+#define	XS_FL		((uint32)1 << 20)	/* flushed */
++static inline void tasklet_init(struct tasklet_struct *tasklet,
++				void (*func)(unsigned long),
++				unsigned long data)
++{
++	tasklet->next = NULL;
++	tasklet->sync = 0;
++	tasklet->routine = (void (*)(void *))func;
++	tasklet->data = (void *)data;
++}
++#define tasklet_kill(tasklet)			{do{} while(0);}
 +
-+/* receive channel control */
-+#define	RC_RE		((uint32)1 << 0)	/* receive enable */
-+#define	RC_RO_MASK	0xfe			/* receive frame offset */
-+#define	RC_RO_SHIFT	1
-+#define	RC_FM		((uint32)1 << 8)	/* direct fifo receive (pio) mode */
++/* 2.4.x introduced del_timer_sync() */
++#define del_timer_sync(timer) del_timer(timer)
 +
-+/* receive descriptor table pointer */
-+#define	RP_LD_MASK	0xfff			/* last valid descriptor */
++#else
 +
-+/* receive channel status */
-+#define	RS_CD_MASK	0x0fff			/* current descriptor pointer */
-+#define	RS_RS_MASK	0xf000			/* receive state */
-+#define	RS_RS_SHIFT	12
-+#define	RS_RS_DISABLED	0x0000			/* disabled */
-+#define	RS_RS_ACTIVE	0x1000			/* active */
-+#define	RS_RS_IDLE	0x2000			/* idle wait */
-+#define	RS_RS_STOPPED	0x3000			/* reserved */
-+#define	RS_RE_MASK	0xf0000			/* receive errors */
-+#define	RS_RE_SHIFT	16
-+#define	RS_RE_NOERR	0x00000			/* no error */
-+#define	RS_RE_DPE	0x10000			/* descriptor protocol error */
-+#define	RS_RE_DFO	0x20000			/* data fifo overflow */
-+#define	RS_RE_BEBW	0x30000			/* bus error on buffer write */
-+#define	RS_RE_BEDA	0x40000			/* bus error on descriptor access */
++#define netif_down(dev)
 +
-+/* fifoaddr */
-+#define	FA_OFF_MASK	0xffff			/* offset */
-+#define	FA_SEL_MASK	0xf0000			/* select */
-+#define	FA_SEL_SHIFT	16
-+#define	FA_SEL_XDD	0x00000			/* transmit dma data */
-+#define	FA_SEL_XDP	0x10000			/* transmit dma pointers */
-+#define	FA_SEL_RDD	0x40000			/* receive dma data */
-+#define	FA_SEL_RDP	0x50000			/* receive dma pointers */
-+#define	FA_SEL_XFD	0x80000			/* transmit fifo data */
-+#define	FA_SEL_XFP	0x90000			/* transmit fifo pointers */
-+#define	FA_SEL_RFD	0xc0000			/* receive fifo data */
-+#define	FA_SEL_RFP	0xd0000			/* receive fifo pointers */
++#endif /* SoftNet */
++
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3))
 +
 +/*
-+ * DMA Descriptor
-+ * Descriptors are only read by the hardware, never written back.
++ * Emit code to initialise a tq_struct's routine and data pointers
 + */
-+typedef volatile struct {
-+	uint32	ctrl;		/* misc control bits & bufcount */
-+	uint32	addr;		/* data buffer address */
-+} dmadd_t;
++#define PREPARE_TQUEUE(_tq, _routine, _data)			\
++	do {							\
++		(_tq)->routine = _routine;			\
++		(_tq)->data = _data;				\
++	} while (0)
 +
 +/*
-+ * Each descriptor ring must be 4096byte aligned
-+ * and fit within a single 4096byte page.
++ * Emit code to initialise all of a tq_struct
 + */
-+#define	DMAMAXRINGSZ	4096
-+#define	DMARINGALIGN	4096
++#define INIT_TQUEUE(_tq, _routine, _data)			\
++	do {							\
++		INIT_LIST_HEAD(&(_tq)->list);			\
++		(_tq)->sync = 0;				\
++		PREPARE_TQUEUE((_tq), (_routine), (_data));	\
++	} while (0)
 +
-+/* control flags */
-+#define	CTRL_BC_MASK	0x1fff			/* buffer byte count */
-+#define	CTRL_EOT	((uint32)1 << 28)	/* end of descriptor table */
-+#define	CTRL_IOC	((uint32)1 << 29)	/* interrupt on completion */
-+#define	CTRL_EOF	((uint32)1 << 30)	/* end of frame */
-+#define	CTRL_SOF	((uint32)1 << 31)	/* start of frame */
++#endif
 +
-+/* control flags in the range [27:20] are core-specific and not defined here */
-+#define	CTRL_CORE_MASK	0x0ff00000
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6))
 +
-+/* export structure */
-+typedef volatile struct {
-+	/* rx error counters */
-+	uint		rxgiants;	/* rx giant frames */
-+	uint		rxnobuf;	/* rx out of dma descriptors */
-+	/* tx error counters */
-+	uint		txnobuf;	/* tx out of dma descriptors */
-+} hnddma_t;
++/* Power management related routines */
 +
-+#ifndef di_t
-+#define	di_t	void
-+#endif
++static inline int
++pci_save_state(struct pci_dev *dev, u32 *buffer)
++{
++	int i;
++	if (buffer) {
++		for (i = 0; i < 16; i++)
++			pci_read_config_dword(dev, i * 4,&buffer[i]);
++	}
++	return 0;
++}
 +
-+/* externs */
-+extern void *dma_attach(void *drv, void *dev, char *name, dmaregs_t *dmaregs,
-+	uint ntxd, uint nrxd, uint rxbufsize, uint nrxpost, uint rxoffset,
-+	uint ddoffset, uint dataoffset, uint *msg_level);
-+extern void dma_detach(di_t *di);
-+extern void dma_txreset(di_t *di);
-+extern void dma_rxreset(di_t *di);
-+extern void dma_txinit(di_t *di);
-+extern bool dma_txenabled(di_t *di);
-+extern void dma_rxinit(di_t *di);
-+extern void dma_rxenable(di_t *di);
-+extern bool dma_rxenabled(di_t *di);
-+extern void dma_txsuspend(di_t *di);
-+extern void dma_txresume(di_t *di);
-+extern bool dma_txsuspended(di_t *di);
-+extern bool dma_txstopped(di_t *di);
-+extern bool dma_rxstopped(di_t *di);
-+extern int dma_txfast(di_t *di, void *p, uint32 coreflags);
-+extern int dma_tx(di_t *di, void *p, uint32 coreflags);
-+extern void dma_fifoloopbackenable(di_t *di);
-+extern void *dma_rx(di_t *di);
-+extern void dma_rxfill(di_t *di);
-+extern void dma_txreclaim(di_t *di, bool forceall);
-+extern void dma_rxreclaim(di_t *di);
-+extern char *dma_dump(di_t *di, char *buf);
-+extern char *dma_dumptx(di_t *di, char *buf);
-+extern char *dma_dumprx(di_t *di, char *buf);
-+extern uint dma_getvar(di_t *di, char *name);
-+extern void *dma_getnexttxp(di_t *di, bool forceall);
-+extern void *dma_getnextrxp(di_t *di, bool forceall);
-+extern void dma_txblock(di_t *di);
-+extern void dma_txunblock(di_t *di);
-+extern uint dma_txactive(di_t *di);
++static inline int 
++pci_restore_state(struct pci_dev *dev, u32 *buffer)
++{
++	int i;
 +
-+#endif	/* _hnddma_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/hndmips.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/hndmips.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/hndmips.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/hndmips.h	2005-08-28 11:12:20.439857784 +0200
-@@ -0,0 +1,16 @@
++	if (buffer) {
++		for (i = 0; i < 16; i++)
++			pci_write_config_dword(dev,i * 4, buffer[i]);
++	}
++	/*
++	 * otherwise, write the context information we know from bootup.
++	 * This works around a problem where warm-booting from Windows
++	 * combined with a D3(hot)->D0 transition causes PCI config
++	 * header data to be forgotten.
++	 */	
++	else {
++		for (i = 0; i < 6; i ++)
++			pci_write_config_dword(dev,
++					       PCI_BASE_ADDRESS_0 + (i * 4),
++					       pci_resource_start(dev, i));
++		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
++	}
++	return 0;
++}
++
++#endif /* PCI power management */
++
++/* Old cp0 access macros deprecated in 2.4.19 */
++#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,19))
++#define read_c0_count() read_32bit_cp0_register(CP0_COUNT)
++#endif
++
++#endif /* _linuxver_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/nvports.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/nvports.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/nvports.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/nvports.h	2005-09-16 10:29:18.191589360 +0200
+@@ -0,0 +1,62 @@
 +/*
-+ * Alternate include file for HND sbmips.h since CFE also ships with
-+ * a sbmips.h.
++ * Broadcom Home Gateway Reference Design
++ * Ports Web Page Configuration Support Routines
 + *
 + * Copyright 2001-2003, Broadcom Corporation
 + * All Rights Reserved.
@@ -9581,17 +8568,105 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/hndmips.h linux-2.6.12.5-brc
 + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
 + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
 + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
 + * $Id$
 + */
 +
-+#include "sbmips.h"
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/linux_osl.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/linux_osl.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/linux_osl.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/linux_osl.h	2005-08-28 11:12:20.440857632 +0200
-@@ -0,0 +1,313 @@
++#ifndef _nvports_h_
++#define _nvports_h_
++
++#define uint32 unsigned long
++#define uint16 unsigned short
++#define uint unsigned int
++#define uint8 unsigned char
++#define uint64 unsigned long long
++
++enum FORCE_PORT {
++	FORCE_OFF,
++	FORCE_10H,
++	FORCE_10F,
++	FORCE_100H,
++	FORCE_100F,
++	FORCE_DOWN,
++	POWER_OFF
++};
++
++typedef struct _PORT_ATTRIBS
++{
++	uint 	autoneg;
++	uint	force;
++	uint	native;	
++} PORT_ATTRIBS;
++
++extern uint
++nvExistsPortAttrib(char *attrib, uint portno);
++
++extern int
++nvExistsAnyForcePortAttrib(uint portno);
++
++extern void
++nvSetPortAttrib(char *attrib, uint portno);
++
++extern void
++nvUnsetPortAttrib(char *attrib, uint portno);
++
++extern void
++nvUnsetAllForcePortAttrib(uint portno);
++
++extern PORT_ATTRIBS
++nvGetSwitchPortAttribs(uint portno);
++
++#endif /* _nvports_h_ */
++
++
++
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/osl.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/osl.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/osl.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/osl.h	2005-09-16 10:29:18.192589208 +0200
+@@ -0,0 +1,38 @@
 +/*
-+ * Linux OS Independent Layer
++ * OS Independent Layer
++ * 
++ * Copyright 2001-2003, Broadcom Corporation   
++ * All Rights Reserved.   
++ *    
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
++ * $Id$
++ */
++
++#ifndef _osl_h_
++#define _osl_h_
++
++#ifdef V2_HAL
++#include <v2hal_osl.h>
++#elif defined(linux)
++#include <linux_osl.h>
++#elif PMON
++#include <pmon_osl.h>
++#elif defined(NDIS)
++#include <ndis_osl.h>
++#elif defined(_CFE_)
++#include <cfe_osl.h>
++#elif defined(MACOS9)
++#include <macos9_osl.h>
++#elif defined(MACOSX)
++#include <macosx_osl.h>
++#else
++#error "Unsupported OSL requested"
++#endif
++
++/* handy */
++#define	SET_REG(r, mask, val)	W_REG((r), ((R_REG(r) & ~(mask)) | (val)))
++
++#endif	/* _osl_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/pcicfg.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/pcicfg.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/pcicfg.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/pcicfg.h	2005-09-16 10:29:18.192589208 +0200
+@@ -0,0 +1,362 @@
++/*
++ * pcicfg.h: PCI configuration  constants and structures.
 + *
 + * Copyright 2001-2003, Broadcom Corporation
 + * All Rights Reserved.
@@ -9604,313 +8679,359 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/linux_osl.h linux-2.6.12.5-b
 + * $Id$
 + */
 +
-+#ifndef _linux_osl_h_
-+#define _linux_osl_h_
++#ifndef	_h_pci_
++#define	_h_pci_
 +
-+#include <typedefs.h>
++/* The following inside ifndef's so we don't collide with NTDDK.H */
++#ifndef PCI_MAX_BUS
++#define PCI_MAX_BUS		0x100
++#endif
++#ifndef PCI_MAX_DEVICES
++#define PCI_MAX_DEVICES		0x20
++#endif
++#ifndef PCI_MAX_FUNCTION
++#define PCI_MAX_FUNCTION	0x8
++#endif
 +
-+/* use current 2.4.x calling conventions */
-+#include <linuxver.h>
++#ifndef PCI_INVALID_VENDORID
++#define PCI_INVALID_VENDORID	0xffff
++#endif
++#ifndef PCI_INVALID_DEVICEID
++#define PCI_INVALID_DEVICEID	0xffff
++#endif
 +
-+/* assert and panic */
-+#define	ASSERT(exp)		do {} while (0)
 +
-+/* PCMCIA attribute space access macros */
-+#define	OSL_PCMCIA_READ_ATTR(osh, offset, buf, size) \
-+	osl_pcmcia_read_attr((osh), (offset), (buf), (size))
-+#define	OSL_PCMCIA_WRITE_ATTR(osh, offset, buf, size) \
-+	osl_pcmcia_write_attr((osh), (offset), (buf), (size))
-+extern void osl_pcmcia_read_attr(void *osh, uint offset, void *buf, int size);
-+extern void osl_pcmcia_write_attr(void *osh, uint offset, void *buf, int size);
++/* Convert between bus-slot-function-register and config addresses */
 +
-+/* PCI configuration space access macros */
-+#define	OSL_PCI_READ_CONFIG(loc, offset, size) \
-+	osl_pci_read_config((loc), (offset), (size))
-+#define	OSL_PCI_WRITE_CONFIG(loc, offset, size, val) \
-+	osl_pci_write_config((loc), (offset), (size), (val))
-+extern uint32 osl_pci_read_config(void *loc, uint size, uint offset);
-+extern void osl_pci_write_config(void *loc, uint offset, uint size, uint val);
++#define	PCICFG_BUS_SHIFT	16	/* Bus shift */
++#define	PCICFG_SLOT_SHIFT	11	/* Slot shift */
++#define	PCICFG_FUN_SHIFT	8	/* Function shift */
++#define	PCICFG_OFF_SHIFT	0	/* Bus shift */
 +
-+/* OSL initialization */
-+#define osl_init()		do {} while (0)
++#define	PCICFG_BUS_MASK		0xff	/* Bus mask */
++#define	PCICFG_SLOT_MASK	0x1f	/* Slot mask */
++#define	PCICFG_FUN_MASK		7	/* Function mask */
++#define	PCICFG_OFF_MASK		0xff	/* Bus mask */
 +
-+/* host/bus architecture-specific byte swap */
-+#define BUS_SWAP32(v)		(v)
++#define	PCI_CONFIG_ADDR(b, s, f, o)					\
++		((((b) & PCICFG_BUS_MASK) << PCICFG_BUS_SHIFT)		\
++		 | (((s) & PCICFG_SLOT_MASK) << PCICFG_SLOT_SHIFT)	\
++		 | (((f) & PCICFG_FUN_MASK) << PCICFG_FUN_SHIFT)	\
++		 | (((o) & PCICFG_OFF_MASK) << PCICFG_OFF_SHIFT))
 +
-+/*
-+ * BINOSL selects the slightly slower function-call-based binary compatible osl.
-+ * Macros expand to calls to functions defined in linux_osl.c .
-+ */
-+#ifndef BINOSL
++#define	PCI_CONFIG_BUS(a)	(((a) >> PCICFG_BUS_SHIFT) & PCICFG_BUS_MASK)
++#define	PCI_CONFIG_SLOT(a)	(((a) >> PCICFG_SLOT_SHIFT) & PCICFG_SLOT_MASK)
++#define	PCI_CONFIG_FUN(a)	(((a) >> PCICFG_FUN_SHIFT) & PCICFG_FUN_MASK)
++#define	PCI_CONFIG_OFF(a)	(((a) >> PCICFG_OFF_SHIFT) & PCICFG_OFF_MASK)
 +
-+/* string library, kernel mode */
-+#define	printf(fmt, args...)	printk(fmt, ## args)
-+#include <linux/kernel.h>
-+#include <linux/string.h>
 +
-+/* register access macros */
-+#define R_REG(r) ({ \
-+	__typeof(*(r)) __osl_v; \
-+	switch (sizeof(*(r))) { \
-+	case sizeof(uint8):	__osl_v = readb((volatile uint8*)(r)); break; \
-+	case sizeof(uint16):	__osl_v = readw((volatile uint16*)(r)); break; \
-+	case sizeof(uint32):	__osl_v = readl((volatile uint32*)(r)); break; \
-+	} \
-+	__osl_v; \
-+})
-+#define W_REG(r, v) do { \
-+	switch (sizeof(*(r))) { \
-+	case sizeof(uint8):	writeb((uint8)(v), (volatile uint8*)(r)); break; \
-+	case sizeof(uint16):	writew((uint16)(v), (volatile uint16*)(r)); break; \
-+	case sizeof(uint32):	writel((uint32)(v), (volatile uint32*)(r)); break; \
-+	} \
-+} while (0)
++/* The actual config space */
 +
-+#define	AND_REG(r, v)		W_REG((r), R_REG(r) & (v))
-+#define	OR_REG(r, v)		W_REG((r), R_REG(r) | (v))
++#define	PCI_BAR_MAX		6
 +
-+/* bcopy, bcmp, and bzero */
-+#define	bcopy(src, dst, len)	memcpy((dst), (src), (len))
-+#define	bcmp(b1, b2, len)	memcmp((b1), (b2), (len))
-+#define	bzero(b, len)		memset((b), '\0', (len))
++#define	PCI_ROM_BAR		8
 +
-+/* general purpose memory allocation */
-+#define	MALLOC(size)		kmalloc((size), GFP_ATOMIC)
-+#define	MFREE(addr, size)	kfree((addr))
++#define	PCR_RSVDA_MAX		2
 +
-+/* uncached virtual address */
-+#ifdef mips
-+#define OSL_UNCACHED(va)	KSEG1ADDR((va))
-+#include <asm/addrspace.h>
-+#else
-+#define OSL_UNCACHED(va)	(va)
-+#endif
++typedef struct _pci_config_regs {
++    unsigned short	vendor;
++    unsigned short	device;
++    unsigned short	command;
++    unsigned short	status;
++    unsigned char	rev_id;
++    unsigned char	prog_if;
++    unsigned char	sub_class;
++    unsigned char	base_class;
++    unsigned char	cache_line_size;
++    unsigned char	latency_timer;
++    unsigned char	header_type;
++    unsigned char	bist;
++    unsigned long	base[PCI_BAR_MAX];
++    unsigned long	cardbus_cis;
++    unsigned short	subsys_vendor;
++    unsigned short	subsys_id;
++    unsigned long	baserom;
++    unsigned long	rsvd_a[PCR_RSVDA_MAX];
++    unsigned char	int_line;
++    unsigned char	int_pin;
++    unsigned char	min_gnt;
++    unsigned char	max_lat;
++    unsigned char	dev_dep[192];
++} pci_config_regs;
 +
-+/* get processor cycle count */
-+#if defined(mips)
-+#define	OSL_GETCYCLES(x)	((x) = read_c0_count() * 2)
-+#elif defined(__i386__)
-+#define	OSL_GETCYCLES(x)	rdtscl((x))
-+#else
-+#define OSL_GETCYCLES(x)	((x) = 0)
-+#endif
++#define	SZPCR		(sizeof (pci_config_regs))
++#define	MINSZPCR	64		/* offsetof (dev_dep[0] */
 +
-+/* dereference an address that may cause a bus exception */
-+#ifdef mips
-+#if defined(MODULE) && (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,17))
-+#define BUSPROBE(val, addr)	panic("get_dbe() will not fixup a bus exception when compiled into a module")
-+#else
-+#define	BUSPROBE(val, addr)	get_dbe((val), (addr))
-+#include <asm/paccess.h>
-+#endif
-+#else
-+#define	BUSPROBE(val, addr)	({ (val) = R_REG((addr)); 0; })
-+#endif
++/* A structure for the config registers is nice, but in most
++ * systems the config space is not memory mapped, so we need
++ * filed offsetts. :-(
++ */
++#define	PCI_CFG_VID		0
++#define	PCI_CFG_DID		2
++#define	PCI_CFG_CMD		4
++#define	PCI_CFG_STAT		6
++#define	PCI_CFG_REV		8
++#define	PCI_CFG_PROGIF		9
++#define	PCI_CFG_SUBCL		0xa
++#define	PCI_CFG_BASECL		0xb
++#define	PCI_CFG_CLSZ		0xc
++#define	PCI_CFG_LATTIM		0xd
++#define	PCI_CFG_HDR		0xe
++#define	PCI_CFG_BIST		0xf
++#define	PCI_CFG_BAR0		0x10
++#define	PCI_CFG_BAR1		0x14
++#define	PCI_CFG_BAR2		0x18
++#define	PCI_CFG_BAR3		0x1c
++#define	PCI_CFG_BAR4		0x20
++#define	PCI_CFG_BAR5		0x24
++#define	PCI_CFG_CIS		0x28
++#define	PCI_CFG_SVID		0x2c
++#define	PCI_CFG_SSID		0x2e
++#define	PCI_CFG_ROMBAR		0x30
++#define	PCI_CFG_INT		0x3c
++#define	PCI_CFG_PIN		0x3d
++#define	PCI_CFG_MINGNT		0x3e
++#define	PCI_CFG_MAXLAT		0x3f
 +
-+/* map/unmap physical to virtual I/O */
-+#define	REG_MAP(pa, size)	ioremap_nocache((unsigned long)(pa), (unsigned long)(size))
-+#define	REG_UNMAP(va)		iounmap((void *)(va))
++/* Classes and subclasses */
 +
-+/* allocate/free shared (dma-able) consistent (uncached) memory */
-+#define	DMA_ALLOC_CONSISTENT(dev, size, pap) \
-+	pci_alloc_consistent((dev), (size), (dma_addr_t*)(pap))
-+#define	DMA_FREE_CONSISTENT(dev, va, size, pa) \
-+	pci_free_consistent((dev), (size), (va), (dma_addr_t)(pa))
++typedef enum {
++    PCI_CLASS_OLD = 0,
++    PCI_CLASS_DASDI,
++    PCI_CLASS_NET,
++    PCI_CLASS_DISPLAY,
++    PCI_CLASS_MMEDIA,
++    PCI_CLASS_MEMORY,
++    PCI_CLASS_BRIDGE,
++    PCI_CLASS_COMM,
++    PCI_CLASS_BASE,
++    PCI_CLASS_INPUT,
++    PCI_CLASS_DOCK,
++    PCI_CLASS_CPU,
++    PCI_CLASS_SERIAL,
++    PCI_CLASS_INTELLIGENT = 0xe,
++    PCI_CLASS_SATELLITE,
++    PCI_CLASS_CRYPT,
++    PCI_CLASS_DSP,
++    PCI_CLASS_MAX
++} pci_classes;
 +
-+/* map/unmap direction */
-+#define	DMA_TX			PCI_DMA_TODEVICE
-+#define	DMA_RX			PCI_DMA_FROMDEVICE
++typedef enum {
++    PCI_DASDI_SCSI,
++    PCI_DASDI_IDE,
++    PCI_DASDI_FLOPPY,
++    PCI_DASDI_IPI,
++    PCI_DASDI_RAID,
++    PCI_DASDI_OTHER = 0x80
++} pci_dasdi_subclasses;
 +
-+/* map/unmap shared (dma-able) memory */
-+#define	DMA_MAP(dev, va, size, direction, p) \
-+	pci_map_single((dev), (va), (size), (direction))
-+#define	DMA_UNMAP(dev, pa, size, direction, p) \
-+	pci_unmap_single((dev), (dma_addr_t)(pa), (size), (direction))
++typedef enum {
++    PCI_NET_ETHER,
++    PCI_NET_TOKEN,
++    PCI_NET_FDDI,
++    PCI_NET_ATM,
++    PCI_NET_OTHER = 0x80
++} pci_net_subclasses;
 +
-+/* microsecond delay */
-+#define	OSL_DELAY(usec)		udelay(usec)
-+#include <linux/delay.h>
-+#define OSL_SLEEP(usec) set_current_state(TASK_INTERRUPTIBLE); \
-+                        schedule_timeout((usec*HZ)/1000000);
-+#define OSL_IN_INTERRUPT() in_interrupt()
++typedef enum {
++    PCI_DISPLAY_VGA,
++    PCI_DISPLAY_XGA,
++    PCI_DISPLAY_3D,
++    PCI_DISPLAY_OTHER = 0x80
++} pci_display_subclasses;
 +
-+/* shared (dma-able) memory access macros */
-+#define	R_SM(r)			*(r)
-+#define	W_SM(r, v)		(*(r) = (v))
-+#define	BZERO_SM(r, len)	memset((r), '\0', (len))
++typedef enum {
++    PCI_MMEDIA_VIDEO,
++    PCI_MMEDIA_AUDIO,
++    PCI_MMEDIA_PHONE,
++    PCI_MEDIA_OTHER = 0x80
++} pci_mmedia_subclasses;
 +
-+/* packet primitives */
-+#define	PKTGET(drv, len, send)		osl_pktget((drv), (len), (send))
-+#define	PKTFREE(drv, skb, send)		osl_pktfree((skb))
-+#define	PKTDATA(drv, skb)		(((struct sk_buff*)(skb))->data)
-+#define	PKTLEN(drv, skb)		(((struct sk_buff*)(skb))->len)
-+#define PKTHEADROOM(drv, skb)		(PKTDATA(drv,skb)-(((struct sk_buff*)(skb))->head))
-+#define PKTTAILROOM(drv, skb)		((((struct sk_buff*)(skb))->end)-(((struct sk_buff*)(skb))->tail))
-+#define	PKTNEXT(drv, skb)		(((struct sk_buff*)(skb))->next)
-+#define	PKTSETNEXT(skb, x)		(((struct sk_buff*)(skb))->next = (struct sk_buff*)(x))
-+#define	PKTSETLEN(drv, skb, len)	__skb_trim((struct sk_buff*)(skb), (len))
-+#define	PKTPUSH(drv, skb, bytes)	skb_push((struct sk_buff*)(skb), (bytes))
-+#define	PKTPULL(drv, skb, bytes)	skb_pull((struct sk_buff*)(skb), (bytes))
-+#define	PKTDUP(drv, skb)		skb_clone((struct sk_buff*)(skb), GFP_ATOMIC)
-+#define	PKTCOOKIE(skb)			((void*)((struct sk_buff*)(skb))->csum)
-+#define	PKTSETCOOKIE(skb, x)		(((struct sk_buff*)(skb))->csum = (uint)(x))
-+#define	PKTLINK(skb)			(((struct sk_buff*)(skb))->prev)
-+#define	PKTSETLINK(skb, x)		(((struct sk_buff*)(skb))->prev = (struct sk_buff*)(x))
-+extern void *osl_pktget(void *drv, uint len, bool send);
-+extern void osl_pktfree(void *skb);
++typedef enum {
++    PCI_MEMORY_RAM,
++    PCI_MEMORY_FLASH,
++    PCI_MEMORY_OTHER = 0x80
++} pci_memory_subclasses;
 +
-+#else	/* BINOSL */                                    
++typedef enum {
++    PCI_BRIDGE_HOST,
++    PCI_BRIDGE_ISA,
++    PCI_BRIDGE_EISA,
++    PCI_BRIDGE_MC,
++    PCI_BRIDGE_PCI,
++    PCI_BRIDGE_PCMCIA,
++    PCI_BRIDGE_NUBUS,
++    PCI_BRIDGE_CARDBUS,
++    PCI_BRIDGE_RACEWAY,
++    PCI_BRIDGE_OTHER = 0x80
++} pci_bridge_subclasses;
 +
-+/* string library */
-+#ifndef LINUX_OSL
-+#undef printf
-+#define	printf(fmt, args...)		osl_printf((fmt), ## args)
-+#undef sprintf
-+#define sprintf(buf, fmt, args...)	osl_sprintf((buf), (fmt), ## args)
-+#undef strcmp
-+#define	strcmp(s1, s2)			osl_strcmp((s1), (s2))
-+#undef strncmp
-+#define	strncmp(s1, s2, n)		osl_strncmp((s1), (s2), (n))
-+#undef strlen
-+#define strlen(s)			osl_strlen((s))
-+#undef strcpy
-+#define	strcpy(d, s)			osl_strcpy((d), (s))
-+#undef strncpy
-+#define	strncpy(d, s, n)		osl_strncpy((d), (s), (n))
-+#endif
-+extern int osl_printf(const char *format, ...);
-+extern int osl_sprintf(char *buf, const char *format, ...);
-+extern int osl_strcmp(const char *s1, const char *s2);
-+extern int osl_strncmp(const char *s1, const char *s2, uint n);
-+extern int osl_strlen(char *s);
-+extern char* osl_strcpy(char *d, const char *s);
-+extern char* osl_strncpy(char *d, const char *s, uint n);
++typedef enum {
++    PCI_COMM_UART,
++    PCI_COMM_PARALLEL,
++    PCI_COMM_MULTIUART,
++    PCI_COMM_MODEM,
++    PCI_COMM_OTHER = 0x80
++} pci_comm_subclasses;
 +
-+/* register access macros */
-+#define R_REG(r) ({ \
-+	__typeof(*(r)) __osl_v; \
-+	switch (sizeof(*(r))) { \
-+	case sizeof(uint8):	__osl_v = osl_readb((volatile uint8*)(r)); break; \
-+	case sizeof(uint16):	__osl_v = osl_readw((volatile uint16*)(r)); break; \
-+	case sizeof(uint32):	__osl_v = osl_readl((volatile uint32*)(r)); break; \
-+	} \
-+	__osl_v; \
-+})
-+#define W_REG(r, v) do { \
-+	switch (sizeof(*(r))) { \
-+	case sizeof(uint8):	osl_writeb((uint8)(v), (volatile uint8*)(r)); break; \
-+	case sizeof(uint16):	osl_writew((uint16)(v), (volatile uint16*)(r)); break; \
-+	case sizeof(uint32):	osl_writel((uint32)(v), (volatile uint32*)(r)); break; \
-+	} \
-+} while (0)
-+#define	AND_REG(r, v)		W_REG((r), R_REG(r) & (v))
-+#define	OR_REG(r, v)		W_REG((r), R_REG(r) | (v))
-+extern uint8 osl_readb(volatile uint8 *r);
-+extern uint16 osl_readw(volatile uint16 *r);
-+extern uint32 osl_readl(volatile uint32 *r);
-+extern void osl_writeb(uint8 v, volatile uint8 *r);
-+extern void osl_writew(uint16 v, volatile uint16 *r);
-+extern void osl_writel(uint32 v, volatile uint32 *r);
++typedef enum {
++    PCI_BASE_PIC,
++    PCI_BASE_DMA,
++    PCI_BASE_TIMER,
++    PCI_BASE_RTC,
++    PCI_BASE_PCI_HOTPLUG,
++    PCI_BASE_OTHER = 0x80
++} pci_base_subclasses;
 +
-+/* bcopy, bcmp, and bzero */
-+extern void bcopy(const void *src, void *dst, int len);
-+extern int bcmp(const void *b1, const void *b2, int len);
-+extern void bzero(void *b, int len);
++typedef enum {
++    PCI_INPUT_KBD,
++    PCI_INPUT_PEN,
++    PCI_INPUT_MOUSE,
++    PCI_INPUT_SCANNER,
++    PCI_INPUT_GAMEPORT,
++    PCI_INPUT_OTHER = 0x80
++} pci_input_subclasses;
 +
-+/* general purpose memory allocation */
-+#define	MALLOC(size)		osl_malloc((size))
-+#define	MFREE(addr, size)	osl_mfree((char*)(addr), (size))
-+extern void *osl_malloc(uint size);
-+extern void osl_mfree(void *addr, uint size);
++typedef enum {
++    PCI_DOCK_GENERIC,
++    PCI_DOCK_OTHER = 0x80
++} pci_dock_subclasses;
 +
-+/* uncached virtual address */
-+#define OSL_UNCACHED(va)	osl_uncached((va))
-+extern void *osl_uncached(void *va);
++typedef enum {
++    PCI_CPU_386,
++    PCI_CPU_486,
++    PCI_CPU_PENTIUM,
++    PCI_CPU_ALPHA = 0x10,
++    PCI_CPU_POWERPC = 0x20,
++    PCI_CPU_MIPS = 0x30,
++    PCI_CPU_COPROC = 0x40,
++    PCI_CPU_OTHER = 0x80
++} pci_cpu_subclasses;
 +
-+/* get processor cycle count */
-+#define OSL_GETCYCLES(x)	((x) = osl_getcycles())
-+extern uint osl_getcycles(void);
++typedef enum {
++    PCI_SERIAL_IEEE1394,
++    PCI_SERIAL_ACCESS,
++    PCI_SERIAL_SSA,
++    PCI_SERIAL_USB,
++    PCI_SERIAL_FIBER,
++    PCI_SERIAL_SMBUS,
++    PCI_SERIAL_OTHER = 0x80
++} pci_serial_subclasses;
 +
-+/* dereference an address that may target abort */
-+#define	BUSPROBE(val, addr)	osl_busprobe(&(val), (addr))
-+extern int osl_busprobe(uint32 *val, uint32 addr);
++typedef enum {
++    PCI_INTELLIGENT_I2O,
++} pci_intelligent_subclasses;
 +
-+/* map/unmap physical to virtual */
-+#define	REG_MAP(pa, size)	osl_reg_map((pa), (size))
-+#define	REG_UNMAP(va)		osl_reg_unmap((va))
-+extern void *osl_reg_map(uint32 pa, uint size);
-+extern void osl_reg_unmap(void *va);
++typedef enum {
++    PCI_SATELLITE_TV,
++    PCI_SATELLITE_AUDIO,
++    PCI_SATELLITE_VOICE,
++    PCI_SATELLITE_DATA,
++    PCI_SATELLITE_OTHER = 0x80
++} pci_satellite_subclasses;
 +
-+/* allocate/free shared (dma-able) consistent (uncached) memory */
-+#define	DMA_ALLOC_CONSISTENT(dev, size, pap) \
-+	osl_dma_alloc_consistent((dev), (size), (pap))
-+#define	DMA_FREE_CONSISTENT(dev, va, size, pa) \
-+	osl_dma_free_consistent((dev), (void*)(va), (size), (pa))
-+extern void *osl_dma_alloc_consistent(void *dev, uint size, ulong *pap);
-+extern void osl_dma_free_consistent(void *dev, void *va, uint size, ulong pa);
++typedef enum {
++    PCI_CRYPT_NETWORK,
++    PCI_CRYPT_ENTERTAINMENT,
++    PCI_CRYPT_OTHER = 0x80
++} pci_crypt_subclasses;
 +
-+/* map/unmap direction */
-+#define	DMA_TX	1
-+#define	DMA_RX	2
++typedef enum {
++    PCI_DSP_DPIO,
++    PCI_DSP_OTHER = 0x80
++} pci_dsp_subclasses;
 +
-+/* map/unmap shared (dma-able) memory */
-+#define	DMA_MAP(dev, va, size, direction, p) \
-+	osl_dma_map((dev), (va), (size), (direction))
-+#define	DMA_UNMAP(dev, pa, size, direction, p) \
-+	osl_dma_unmap((dev), (pa), (size), (direction))
-+extern uint osl_dma_map(void *dev, void *va, uint size, int direction);
-+extern void osl_dma_unmap(void *dev, uint pa, uint size, int direction);
++/* Header types */
++typedef enum {
++	PCI_HEADER_NORMAL,
++	PCI_HEADER_BRIDGE,
++	PCI_HEADER_CARDBUS
++} pci_header_types;
 +
-+/* microsecond delay */
-+#define	OSL_DELAY(usec)		osl_delay((usec))
-+extern void osl_delay(uint usec);
 +
-+/* shared (dma-able) memory access macros */
-+#define	R_SM(r)			*(r)
-+#define	W_SM(r, v)		(*(r) = (v))
-+#define	BZERO_SM(r, len)	bzero((r), (len))
++/* Overlay for a PCI-to-PCI bridge */
 +
-+/* packet primitives */
-+#define	PKTGET(drv, len, send)		osl_pktget((drv), (len), (send))
-+#define	PKTFREE(drv, skb, send)		osl_pktfree((skb))
-+#define	PKTDATA(drv, skb)		osl_pktdata((drv), (skb))
-+#define	PKTLEN(drv, skb)		osl_pktlen((drv), (skb))
-+#define	PKTNEXT(drv, skb)		osl_pktnext((drv), (skb))
-+#define	PKTSETNEXT(skb, x)		osl_pktsetnext((skb), (x))
-+#define	PKTSETLEN(drv, skb, len)	osl_pktsetlen((drv), (skb), (len))
-+#define	PKTPUSH(drv, skb, bytes)	osl_pktpush((drv), (skb), (bytes))
-+#define	PKTPULL(drv, skb, bytes)	osl_pktpull((drv), (skb), (bytes))
-+#define	PKTDUP(drv, skb)		osl_pktdup((drv), (skb))
-+#define	PKTCOOKIE(skb)			osl_pktcookie((skb))
-+#define	PKTSETCOOKIE(skb, x)		osl_pktsetcookie((skb), (x))
-+#define	PKTLINK(skb)			osl_pktlink((skb))
-+#define	PKTSETLINK(skb, x)		osl_pktsetlink((skb), (x))
-+extern void *osl_pktget(void *drv, uint len, bool send);
-+extern void osl_pktfree(void *skb);
-+extern uchar *osl_pktdata(void *drv, void *skb);
-+extern uint osl_pktlen(void *drv, void *skb);
-+extern void *osl_pktnext(void *drv, void *skb);
-+extern void osl_pktsetnext(void *skb, void *x);
-+extern void osl_pktsetlen(void *drv, void *skb, uint len);
-+extern uchar *osl_pktpush(void *drv, void *skb, int bytes);
-+extern uchar *osl_pktpull(void *drv, void *skb, int bytes);
-+extern void *osl_pktdup(void *drv, void *skb);
-+extern void *osl_pktcookie(void *skb);
-+extern void osl_pktsetcookie(void *skb, void *x);
-+extern void *osl_pktlink(void *skb);
-+extern void osl_pktsetlink(void *skb, void *x);
++#define	PPB_RSVDA_MAX		2
++#define	PPB_RSVDD_MAX		8
 +
-+#endif	/* BINOSL */
++typedef struct _ppb_config_regs {
++    unsigned short	vendor;
++    unsigned short	device;
++    unsigned short	command;
++    unsigned short	status;
++    unsigned char	rev_id;
++    unsigned char	prog_if;
++    unsigned char	sub_class;
++    unsigned char	base_class;
++    unsigned char	cache_line_size;
++    unsigned char	latency_timer;
++    unsigned char	header_type;
++    unsigned char	bist;
++    unsigned long	rsvd_a[PPB_RSVDA_MAX];
++    unsigned char	prim_bus;
++    unsigned char	sec_bus;
++    unsigned char	sub_bus;
++    unsigned char	sec_lat;
++    unsigned char	io_base;
++    unsigned char	io_lim;
++    unsigned short	sec_status;
++    unsigned short	mem_base;
++    unsigned short	mem_lim;
++    unsigned short	pf_mem_base;
++    unsigned short	pf_mem_lim;
++    unsigned long	pf_mem_base_hi;
++    unsigned long	pf_mem_lim_hi;
++    unsigned short	io_base_hi;
++    unsigned short	io_lim_hi;
++    unsigned short	subsys_vendor;
++    unsigned short	subsys_id;
++    unsigned long	rsvd_b;
++    unsigned char	rsvd_c;
++    unsigned char	int_pin;
++    unsigned short	bridge_ctrl;
++    unsigned char	chip_ctrl;
++    unsigned char	diag_ctrl;
++    unsigned short	arb_ctrl;
++    unsigned long	rsvd_d[PPB_RSVDD_MAX];
++    unsigned char	dev_dep[192];
++} ppb_config_regs;
 +
-+#endif	/* _linux_osl_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/linuxver.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/linuxver.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/linuxver.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/linuxver.h	2005-08-28 11:12:20.441857480 +0200
-@@ -0,0 +1,326 @@
++/* Eveything below is BRCM HND proprietary */
++
++#define	PCI_BAR0_WIN		0x80	/* backplane addres space accessed by BAR0 */
++#define	PCI_BAR1_WIN		0x84	/* backplane addres space accessed by BAR1 */
++#define	PCI_SPROM_CONTROL	0x88	/* sprom property control */
++#define	PCI_BAR1_CONTROL	0x8c	/* BAR1 region burst control */
++#define	PCI_INT_STATUS		0x90	/* PCI and other cores interrupts */
++#define	PCI_INT_MASK		0x94	/* mask of PCI and other cores interrupts */
++#define PCI_TO_SB_MB		0x98	/* signal backplane interrupts */
++#define PCI_BACKPLANE_ADDR	0xA0	/* address an arbitrary location on the system backplane */
++#define PCI_BACKPLANE_DATA	0xA4	/* data at the location specified by above address register */
++#define	PCI_GPIO_IN		0xb0	/* pci config space gpio input (>=rev3) */
++#define	PCI_GPIO_OUT		0xb4	/* pci config space gpio output (>=rev3) */
++#define	PCI_GPIO_OUTEN		0xb8	/* pci config space gpio output enable (>=rev3) */
++
++#define	PCI_BAR0_SPROM_OFFSET	(4 * 1024)	/* bar0 + 4K accesses external sprom */
++#define	PCI_BAR0_PCIREGS_OFFSET	(6 * 1024)	/* bar0 + 6K accesses pci core registers */
++
++/* PCI_INT_MASK */
++#define	PCI_SBIM_SHIFT		8	/* backplane core interrupt mask bits offset */
++#define	PCI_SBIM_MASK		0xff00	/* backplane core interrupt mask */
++
++/* PCI_SPROM_CONTROL */
++#define	SPROM_BLANK		0x04  	/* indicating a blank sprom */
++#define SPROM_WRITEEN		0x10	/* sprom write enable */
++#define SPROM_BOOTROM_WE	0x20	/* external bootrom write enable */
++
++#define	SPROM_SIZE		256	/* sprom size in 16-bit */
++#define SPROM_CRC_RANGE		64	/* crc cover range in 16-bit */
++
++#endif
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/proto/802.11.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/proto/802.11.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/proto/802.11.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/proto/802.11.h	2005-09-16 10:29:18.204587384 +0200
+@@ -0,0 +1,679 @@
 +/*
-+ * Linux-specific abstractions to gain some independence from linux kernel versions.
-+ * Pave over some 2.2 versus 2.4 kernel differences.
-+ *
 + * Copyright 2001-2003, Broadcom Corporation   
 + * All Rights Reserved.   
 + *    
@@ -9918,800 +9039,683 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/linuxver.h linux-2.6.12.5-br
 + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
 + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
 + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
++ *
++ * Fundamental types and constants relating to 802.11 
++ *
 + * $Id$
 + */
 +
-+#ifndef _linuxver_h_
-+#define _linuxver_h_
-+
-+#include <linux/config.h>
-+#include <linux/version.h>
++#ifndef _802_11_H_
++#define _802_11_H_
 +
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,0))
-+/* __NO_VERSION__ must be defined for all linkables except one in 2.2 */
-+#ifdef __UNDEF_NO_VERSION__
-+#undef __NO_VERSION__
-+#else
-+#define __NO_VERSION__
-+#endif
++#ifndef _TYPEDEFS_H_
++#include <typedefs.h>
 +#endif
 +
-+#if defined(MODULE) && defined(MODVERSIONS)
-+#include <linux/modversions.h>
++#ifndef _NET_ETHERNET_H_
++#include <proto/ethernet.h>
 +#endif
 +
-+/* linux/malloc.h is deprecated, use linux/slab.h instead. */
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,9))
-+#include <linux/malloc.h>
-+#else
-+#include <linux/slab.h>
++/* enable structure packing */
++#if !defined(__GNUC__)
++#pragma pack(1)
 +#endif
 +
-+#include <linux/types.h>
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/mm.h>
-+#include <linux/string.h>
-+#include <linux/pci.h>
-+#include <linux/interrupt.h>
-+#include <linux/netdevice.h>
-+#include <asm/io.h>
-+
-+#ifndef __exit
-+#define __exit
-+#endif
-+#ifndef __devexit
-+#define __devexit
-+#endif
-+#ifndef __devinit
-+#define __devinit	__init
-+#endif
-+#ifndef __devinitdata
-+#define __devinitdata
-+#endif
-+#ifndef __devexit_p
-+#define __devexit_p(x)	x
++/* some platforms require stronger medicine */
++#if defined(__GNUC__)
++#define	PACKED	__attribute__((packed))
++#else
++#define	PACKED
 +#endif
 +
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,0))
-+
-+#define pci_get_drvdata(dev)		(dev)->sysdata
-+#define pci_set_drvdata(dev, value)	(dev)->sysdata=(value)
-+
-+/*
-+ * New-style (2.4.x) PCI/hot-pluggable PCI/CardBus registration
-+ */
 +
-+struct pci_device_id {
-+	unsigned int vendor, device;		/* Vendor and device ID or PCI_ANY_ID */
-+	unsigned int subvendor, subdevice;	/* Subsystem ID's or PCI_ANY_ID */
-+	unsigned int class, class_mask;		/* (class,subclass,prog-if) triplet */
-+	unsigned long driver_data;		/* Data private to the driver */
-+};
++#define DOT11_TU_TO_US			1024	/* 802.11 Time Unit is 1024 microseconds */
 +
-+struct pci_driver {
-+	struct list_head node;
-+	char *name;
-+	const struct pci_device_id *id_table;	/* NULL if wants all devices */
-+	int (*probe)(struct pci_dev *dev, const struct pci_device_id *id);	/* New device inserted */
-+	void (*remove)(struct pci_dev *dev);	/* Device removed (NULL if not a hot-plug capable driver) */
-+	void (*suspend)(struct pci_dev *dev);	/* Device suspended */
-+	void (*resume)(struct pci_dev *dev);	/* Device woken up */
-+};
++/* Generic 802.11 frame constants */
++#define DOT11_A3_HDR_LEN		24
++#define DOT11_A4_HDR_LEN		30
++#define DOT11_MAC_HDR_LEN		DOT11_A3_HDR_LEN
++#define DOT11_FCS_LEN			4
++#define DOT11_ICV_LEN			4
++#define DOT11_ICV_AES_LEN		8
 +
-+#define MODULE_DEVICE_TABLE(type, name)
-+#define PCI_ANY_ID (~0)
 +
-+/* compatpci.c */
-+#define pci_module_init pci_register_driver
-+extern int pci_register_driver(struct pci_driver *drv);
-+extern void pci_unregister_driver(struct pci_driver *drv);
++#define DOT11_KEY_INDEX_SHIFT		6
++#define DOT11_IV_LEN			4
++#define DOT11_IV_TKIP_LEN		8
++#define DOT11_IV_AES_OCB_LEN		4
++#define DOT11_IV_AES_CCM_LEN		8
 +
-+#endif /* PCI registration */
++#define DOT11_MAX_MPDU_BODY_LEN		2312
++#define DOT11_MAX_MPDU_LEN		2346	/* body len + A4 hdr + FCS */
++#define DOT11_MAX_SSID_LEN		32
 +
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,2,18))
-+#ifdef MODULE
-+#define module_init(x) int init_module(void) { return x(); }
-+#define module_exit(x) void cleanup_module(void) { x(); }
-+#else
-+#define module_init(x)	__initcall(x);
-+#define module_exit(x)	__exitcall(x);
-+#endif
-+#endif
++/* dot11RTSThreshold */
++#define DOT11_DEFAULT_RTS_LEN		2347
++#define DOT11_MAX_RTS_LEN		2347
 +
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,48))
-+#define list_for_each(pos, head) \
-+	for (pos = (head)->next; pos != (head); pos = pos->next)
-+#endif
++/* dot11FragmentationThreshold */
++#define DOT11_MIN_FRAG_LEN		256
++#define DOT11_MAX_FRAG_LEN		2346	/* Max frag is also limited by aMPDUMaxLength of the attached PHY */
++#define DOT11_DEFAULT_FRAG_LEN		2346
 +
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,13))
-+#define pci_resource_start(dev, bar)	((dev)->base_address[(bar)])
-+#elif (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,44))
-+#define pci_resource_start(dev, bar)	((dev)->resource[(bar)].start)
-+#endif
++/* dot11BeaconPeriod */
++#define DOT11_MIN_BEACON_PERIOD		1
++#define DOT11_MAX_BEACON_PERIOD		0xFFFF
 +
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,23))
-+#define pci_enable_device(dev) do { } while (0)
-+#endif
++/* dot11DTIMPeriod */
++#define DOT11_MIN_DTIM_PERIOD		1
++#define DOT11_MAX_DTIM_PERIOD		0xFF
 +
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,14))
-+#define net_device device
-+#endif
++/* 802.2 LLC/SNAP header used by 802.11 per 802.1H */
++#define DOT11_LLC_SNAP_HDR_LEN	8
++#define DOT11_OUI_LEN			3
++struct dot11_llc_snap_header {
++	uint8	dsap;				/* always 0xAA */
++	uint8	ssap;				/* always 0xAA */
++	uint8	ctl;				/* always 0x03 */
++	uint8	oui[DOT11_OUI_LEN];		/* RFC1042: 0x00 0x00 0x00
++						   Bridge-Tunnel: 0x00 0x00 0xF8 */
++	uint16	type;				/* ethertype */
++} PACKED;
 +
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,42))
++/* RFC1042 header used by 802.11 per 802.1H */
++#define RFC1042_HDR_LEN			(ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN)
 +
++/* Generic 802.11 MAC header */
 +/*
-+ * DMA mapping
-+ *
-+ * See linux/Documentation/DMA-mapping.txt
++ * N.B.: This struct reflects the full 4 address 802.11 MAC header.
++ *		 The fields are defined such that the shorter 1, 2, and 3
++ *		 address headers just use the first k fields.
 + */
++struct dot11_header {
++	uint16			fc;		/* frame control */
++	uint16			durid;		/* duration/ID */
++	struct ether_addr	a1;		/* address 1 */
++	struct ether_addr	a2;		/* address 2 */
++	struct ether_addr	a3;		/* address 3 */
++	uint16			seq;		/* sequence control */
++	struct ether_addr	a4;		/* address 4 */
++} PACKED;
 +
-+#ifndef PCI_DMA_TODEVICE
-+#define	PCI_DMA_TODEVICE	1
-+#define	PCI_DMA_FROMDEVICE	2
-+#endif
-+
-+typedef u32 dma_addr_t;
++/* Control frames */
 +
-+/* Pure 2^n version of get_order */
-+static inline int get_order(unsigned long size)
-+{
-+	int order;
++struct dot11_rts_frame {
++	uint16			fc;		/* frame control */
++	uint16			durid;		/* duration/ID */
++	struct ether_addr	ra;		/* receiver address */
++	struct ether_addr	ta;		/* transmitter address */
++} PACKED;
++#define	DOT11_RTS_LEN		16
 +
-+	size = (size-1) >> (PAGE_SHIFT-1);
-+	order = -1;
-+	do {
-+		size >>= 1;
-+		order++;
-+	} while (size);
-+	return order;
-+}
++struct dot11_cts_frame {
++	uint16			fc;		/* frame control */
++	uint16			durid;		/* duration/ID */
++	struct ether_addr	ra;		/* receiver address */
++} PACKED;
++#define	DOT11_CTS_LEN		10
 +
-+static inline void *pci_alloc_consistent(struct pci_dev *hwdev, size_t size,
-+					 dma_addr_t *dma_handle)
-+{
-+	void *ret;
-+	int gfp = GFP_ATOMIC | GFP_DMA;
++struct dot11_ack_frame {
++	uint16			fc;		/* frame control */
++	uint16			durid;		/* duration/ID */
++	struct ether_addr	ra;		/* receiver address */
++} PACKED;
++#define	DOT11_ACK_LEN		10
 +
-+	ret = (void *)__get_free_pages(gfp, get_order(size));
++struct dot11_ps_poll_frame {
++	uint16			fc;		/* frame control */
++	uint16			durid;		/* AID */
++	struct ether_addr	bssid;		/* receiver address, STA in AP */
++	struct ether_addr	ta;		/* transmitter address */
++} PACKED;
++#define	DOT11_PS_POLL_LEN	16
 +
-+	if (ret != NULL) {
-+		memset(ret, 0, size);
-+		*dma_handle = virt_to_bus(ret);
-+	}
-+	return ret;
-+}
-+static inline void pci_free_consistent(struct pci_dev *hwdev, size_t size,
-+				       void *vaddr, dma_addr_t dma_handle)
-+{
-+	free_pages((unsigned long)vaddr, get_order(size));
-+}
-+#ifdef ILSIM
-+extern uint pci_map_single(void *dev, void *va, uint size, int direction);
-+extern void pci_unmap_single(void *dev, uint pa, uint size, int direction);
-+#else
-+#define pci_map_single(cookie, address, size, dir)	virt_to_bus(address)
-+#define pci_unmap_single(cookie, address, size, dir)
-+#endif
++struct dot11_cf_end_frame {
++	uint16			fc;		/* frame control */
++	uint16			durid;		/* duration/ID */
++	struct ether_addr	ra;		/* receiver address */
++	struct ether_addr	bssid;		/* transmitter address, STA in AP */
++} PACKED;
++#define	DOT11_CS_END_LEN	16
 +
-+#endif /* DMA mapping */
++/* Management frame header */
++struct dot11_management_header {
++	uint16			fc;		/* frame control */
++	uint16			durid;		/* duration/ID */
++	struct ether_addr	da;		/* receiver address */
++	struct ether_addr	sa;		/* transmitter address */
++	struct ether_addr	bssid;		/* BSS ID */
++	uint16			seq;		/* sequence control */
++} PACKED;
++#define	DOT11_MGMT_HDR_LEN	24
 +
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,3,43))
++/* Management frame payloads */
 +
-+#define dev_kfree_skb_any(a)		dev_kfree_skb(a)
-+#define netif_down(dev)			do { (dev)->start = 0; } while(0)
++struct dot11_bcn_prb {
++	uint32			timestamp[2];
++	uint16			beacon_interval;
++	uint16			capability;
++} PACKED;
++#define	DOT11_BCN_PRB_LEN	12
 +
-+/* pcmcia-cs provides its own netdevice compatibility layer */
-+#ifndef _COMPAT_NETDEVICE_H
++struct dot11_auth {
++	uint16			alg;		/* algorithm */
++	uint16			seq;		/* sequence control */
++	uint16			status;		/* status code */
++} PACKED;
++#define DOT11_AUTH_FIXED_LEN	6		/* length of auth frame without challenge info elt */
 +
-+/*
-+ * SoftNet
-+ *
-+ * For pre-softnet kernels we need to tell the upper layer not to
-+ * re-enter start_xmit() while we are in there. However softnet
-+ * guarantees not to enter while we are in there so there is no need
-+ * to do the netif_stop_queue() dance unless the transmit queue really
-+ * gets stuck. This should also improve performance according to tests
-+ * done by Aman Singla.
-+ */
-+
-+#define dev_kfree_skb_irq(a)		dev_kfree_skb(a)
-+#define netif_wake_queue(dev)		do { clear_bit(0, &(dev)->tbusy); mark_bh(NET_BH); } while(0)
-+#define netif_stop_queue(dev)		set_bit(0, &(dev)->tbusy)
-+
-+static inline void netif_start_queue(struct net_device *dev)
-+{
-+	dev->tbusy = 0;
-+	dev->interrupt = 0;
-+	dev->start = 1;
-+}
++struct dot11_assoc_req {
++	uint16			capability;	/* capability information */
++	uint16			listen;		/* listen interval */
++} PACKED;
 +
-+#define netif_queue_stopped(dev)	(dev)->tbusy
-+#define netif_running(dev)		(dev)->start
++struct dot11_assoc_resp {
++	uint16			capability;	/* capability information */
++	uint16			status;		/* status code */
++	uint16			aid;		/* association ID */
++} PACKED;
 +
-+#endif /* _COMPAT_NETDEVICE_H */
++struct dot11_action_measure {
++	uint8	category;
++	uint8	action;
++	uint8	token;
++	uint8	data[1];
++} PACKED;
++#define DOT11_ACTION_MEASURE_LEN	3
 +
-+#define netif_device_attach(dev)	netif_start_queue(dev)
-+#define netif_device_detach(dev)	netif_stop_queue(dev)
++/**************
++  802.11h related definitions.
++**************/
++typedef struct {
++	uint8 id;
++	uint8 len;
++	uint8 power;
++} dot11_power_cnst_t;
 +
-+/* 2.4.x renamed bottom halves to tasklets */
-+#define tasklet_struct				tq_struct
-+static inline void tasklet_schedule(struct tasklet_struct *tasklet)
-+{
-+	queue_task(tasklet, &tq_immediate);
-+	mark_bh(IMMEDIATE_BH);
-+}
++typedef struct {
++	uint8 min;
++	uint8 max;
++} dot11_power_cap_t;
 +
-+static inline void tasklet_init(struct tasklet_struct *tasklet,
-+				void (*func)(unsigned long),
-+				unsigned long data)
-+{
-+	tasklet->next = NULL;
-+	tasklet->sync = 0;
-+	tasklet->routine = (void (*)(void *))func;
-+	tasklet->data = (void *)data;
-+}
-+#define tasklet_kill(tasklet)			{do{} while(0);}
++typedef struct {
++	uint8 id;
++	uint8 len;
++	uint8 tx_pwr;
++	uint8 margin;
++} dot11_tpc_rep_t;
++#define DOT11_MNG_IE_TPC_REPORT_LEN	2	/* length of IE data, not including 2 byte header */
 +
-+/* 2.4.x introduced del_timer_sync() */
-+#define del_timer_sync(timer) del_timer(timer)
++typedef struct {
++	uint8 id;
++	uint8 len;
++	uint8 first_channel;
++	uint8 num_channels;
++} dot11_supp_channels_t;
 +
-+#else
++struct dot11_channel_switch {
++	uint8 id;
++	uint8 len;
++	uint8 mode;
++	uint8 channel;
++	uint8 count;
++}  PACKED;
++typedef struct dot11_channel_switch dot11_channel_switch_t;
 +
-+#define netif_down(dev)
++/* 802.11h Measurement Request/Report IEs */
++/* Measurement Type field */
++#define DOT11_MEASURE_TYPE_BASIC 	0
++#define DOT11_MEASURE_TYPE_CCA 		1
++#define DOT11_MEASURE_TYPE_RPI	 	2
 +
-+#endif /* SoftNet */
++/* Measurement Mode field */
 +
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,3))
++/* Measurement Request Modes */
++#define DOT11_MEASURE_MODE_ENABLE 	(1<<1)
++#define DOT11_MEASURE_MODE_REQUEST	(1<<2)
++#define DOT11_MEASURE_MODE_REPORT 	(1<<3)
++/* Measurement Report Modes */
++#define DOT11_MEASURE_MODE_LATE 	(1<<0)
++#define DOT11_MEASURE_MODE_INCAPABLE	(1<<1)
++#define DOT11_MEASURE_MODE_REFUSED	(1<<2)
++/* Basic Measurement Map bits */
++#define DOT11_MEASURE_BASIC_MAP_BSS	((uint8)(1<<0))
++#define DOT11_MEASURE_BASIC_MAP_OFDM	((uint8)(1<<1))
++#define DOT11_MEASURE_BASIC_MAP_UKNOWN	((uint8)(1<<2))
++#define DOT11_MEASURE_BASIC_MAP_RADAR	((uint8)(1<<3))
++#define DOT11_MEASURE_BASIC_MAP_UNMEAS	((uint8)(1<<4))
 +
-+/*
-+ * Emit code to initialise a tq_struct's routine and data pointers
-+ */
-+#define PREPARE_TQUEUE(_tq, _routine, _data)			\
-+	do {							\
-+		(_tq)->routine = _routine;			\
-+		(_tq)->data = _data;				\
-+	} while (0)
++typedef struct {
++	uint8 id;
++	uint8 len;
++	uint8 token;
++	uint8 mode;
++	uint8 type;
++	uint8 channel;
++	uint8 start_time[8];
++	uint16 duration;
++} dot11_meas_req_t;
++#define DOT11_MNG_IE_MREQ_LEN 14
++/* length of Measure Request IE data not including variable len */
++#define DOT11_MNG_IE_MREQ_FIXED_LEN 3
 +
-+/*
-+ * Emit code to initialise all of a tq_struct
-+ */
-+#define INIT_TQUEUE(_tq, _routine, _data)			\
-+	do {							\
-+		INIT_LIST_HEAD(&(_tq)->list);			\
-+		(_tq)->sync = 0;				\
-+		PREPARE_TQUEUE((_tq), (_routine), (_data));	\
-+	} while (0)
++struct dot11_meas_rep {
++	uint8 id;
++	uint8 len;
++	uint8 token;
++	uint8 mode;
++	uint8 type;
++	union 
++	{
++		struct {
++			uint8 channel;
++			uint8 start_time[8];
++			uint16 duration;
++			uint8 map;
++		} PACKED basic;
++		uint8 data[1];
++	} PACKED rep;
++} PACKED;
++typedef struct dot11_meas_rep dot11_meas_rep_t;
 +
-+#endif
++/* length of Measure Report IE data not including variable len */
++#define DOT11_MNG_IE_MREP_FIXED_LEN	3
 +
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,6))
++struct dot11_meas_rep_basic {
++	uint8 channel;
++	uint8 start_time[8];
++	uint16 duration;
++	uint8 map;
++} PACKED;
++typedef struct dot11_meas_rep_basic dot11_meas_rep_basic_t;
++#define DOT11_MEASURE_BASIC_REP_LEN	12
 +
-+/* Power management related routines */
++struct dot11_quiet {
++	uint8 id;
++	uint8 len;
++	uint8 count;	/* TBTTs until beacon interval in quiet starts */
++	uint8 period;	/* Beacon intervals between periodic quiet periods ? */
++	uint16 duration;/* Length of quiet period, in TU's */
++	uint16 offset;	/* TU's offset from TBTT in Count field */
++} PACKED;
++typedef struct dot11_quiet dot11_quiet_t;
 +
-+static inline int
-+pci_save_state(struct pci_dev *dev, u32 *buffer)
-+{
-+	int i;
-+	if (buffer) {
-+		for (i = 0; i < 16; i++)
-+			pci_read_config_dword(dev, i * 4,&buffer[i]);
-+	}
-+	return 0;
-+}
++typedef struct {
++	uint8 channel;
++	uint8 map;
++} chan_map_tuple_t;
 +
-+static inline int 
-+pci_restore_state(struct pci_dev *dev, u32 *buffer)
-+{
-+	int i;
++typedef struct {
++	uint8 id;
++	uint8 len;
++	uint8 eaddr[ETHER_ADDR_LEN];
++	uint8 interval;
++	chan_map_tuple_t map[1];
++} dot11_ibss_dfs_t;
 +
-+	if (buffer) {
-+		for (i = 0; i < 16; i++)
-+			pci_write_config_dword(dev,i * 4, buffer[i]);
-+	}
-+	/*
-+	 * otherwise, write the context information we know from bootup.
-+	 * This works around a problem where warm-booting from Windows
-+	 * combined with a D3(hot)->D0 transition causes PCI config
-+	 * header data to be forgotten.
-+	 */	
-+	else {
-+		for (i = 0; i < 6; i ++)
-+			pci_write_config_dword(dev,
-+					       PCI_BASE_ADDRESS_0 + (i * 4),
-+					       pci_resource_start(dev, i));
-+		pci_write_config_byte(dev, PCI_INTERRUPT_LINE, dev->irq);
-+	}
-+	return 0;
-+}
 +
-+#endif /* PCI power management */
++/* Macro to take a pointer to a beacon or probe response
++ * header and return the char* pointer to the SSID info element
++ */
++#define BCN_PRB_SSID(hdr) ((char*)(hdr) + DOT11_MGMT_HDR_LEN + DOT11_BCN_PRB_LEN)
 +
-+/* Old cp0 access macros deprecated in 2.4.19 */
-+#if (LINUX_VERSION_CODE < KERNEL_VERSION(2,4,19))
-+#define read_c0_count() read_32bit_cp0_register(CP0_COUNT)
-+#endif
++/* Authentication frame payload constants */
++#define DOT11_OPEN_SYSTEM	0
++#define DOT11_SHARED_KEY	1
++#define DOT11_CHALLENGE_LEN	128
 +
-+#endif /* _linuxver_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/nvports.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/nvports.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/nvports.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/nvports.h	2005-08-28 11:12:20.441857480 +0200
-@@ -0,0 +1,62 @@
-+/*
-+ * Broadcom Home Gateway Reference Design
-+ * Ports Web Page Configuration Support Routines
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ * $Id$
-+ */
-+
-+#ifndef _nvports_h_
-+#define _nvports_h_
++/* Frame control macros */
++#define FC_PVER_MASK		0x3
++#define FC_PVER_SHIFT		0
++#define FC_TYPE_MASK		0xC
++#define FC_TYPE_SHIFT		2
++#define FC_SUBTYPE_MASK		0xF0
++#define FC_SUBTYPE_SHIFT	4
++#define FC_TODS			0x100
++#define FC_TODS_SHIFT		8
++#define FC_FROMDS		0x200
++#define FC_FROMDS_SHIFT		9
++#define FC_MOREFRAG		0x400
++#define FC_MOREFRAG_SHIFT	10
++#define FC_RETRY		0x800
++#define FC_RETRY_SHIFT		11
++#define FC_PM			0x1000
++#define FC_PM_SHIFT		12
++#define FC_MOREDATA		0x2000
++#define FC_MOREDATA_SHIFT	13
++#define FC_WEP			0x4000
++#define FC_WEP_SHIFT		14
++#define FC_ORDER		0x8000
++#define FC_ORDER_SHIFT		15
 +
-+#define uint32 unsigned long
-+#define uint16 unsigned short
-+#define uint unsigned int
-+#define uint8 unsigned char
-+#define uint64 unsigned long long
++/* sequence control macros */
++#define SEQNUM_SHIFT		4
++#define FRAGNUM_MASK		0xF
 +
-+enum FORCE_PORT {
-+	FORCE_OFF,
-+	FORCE_10H,
-+	FORCE_10F,
-+	FORCE_100H,
-+	FORCE_100F,
-+	FORCE_DOWN,
-+	POWER_OFF
-+};
++/* Frame Control type/subtype defs */
 +
-+typedef struct _PORT_ATTRIBS
-+{
-+	uint 	autoneg;
-+	uint	force;
-+	uint	native;	
-+} PORT_ATTRIBS;
++/* FC Types */
++#define FC_TYPE_MNG		0
++#define FC_TYPE_CTL		1
++#define FC_TYPE_DATA		2
 +
-+extern uint
-+nvExistsPortAttrib(char *attrib, uint portno);
++/* Management Subtypes */
++#define FC_SUBTYPE_ASSOC_REQ		0
++#define FC_SUBTYPE_ASSOC_RESP		1
++#define FC_SUBTYPE_REASSOC_REQ		2
++#define FC_SUBTYPE_REASSOC_RESP		3
++#define FC_SUBTYPE_PROBE_REQ		4
++#define FC_SUBTYPE_PROBE_RESP		5
++#define FC_SUBTYPE_BEACON		8
++#define FC_SUBTYPE_ATIM			9
++#define FC_SUBTYPE_DISASSOC		10
++#define FC_SUBTYPE_AUTH			11
++#define FC_SUBTYPE_DEAUTH		12
++#define FC_SUBTYPE_ACTION		13
 +
-+extern int
-+nvExistsAnyForcePortAttrib(uint portno);
++/* Control Subtypes */
++#define FC_SUBTYPE_PS_POLL		10
++#define FC_SUBTYPE_RTS			11
++#define FC_SUBTYPE_CTS			12
++#define FC_SUBTYPE_ACK			13
++#define FC_SUBTYPE_CF_END		14
++#define FC_SUBTYPE_CF_END_ACK		15
 +
-+extern void
-+nvSetPortAttrib(char *attrib, uint portno);
++/* Data Subtypes */
++#define FC_SUBTYPE_DATA			0
++#define FC_SUBTYPE_DATA_CF_ACK		1
++#define FC_SUBTYPE_DATA_CF_POLL		2
++#define FC_SUBTYPE_DATA_CF_ACK_POLL	3
++#define FC_SUBTYPE_NULL			4
++#define FC_SUBTYPE_CF_ACK		5
++#define FC_SUBTYPE_CF_POLL		6
++#define FC_SUBTYPE_CF_ACK_POLL		7
 +
-+extern void
-+nvUnsetPortAttrib(char *attrib, uint portno);
++/* type-subtype combos */
++#define FC_KIND_MASK		(FC_TYPE_MASK | FC_SUBTYPE_MASK)
 +
-+extern void
-+nvUnsetAllForcePortAttrib(uint portno);
++#define FC_KIND(t, s) (((t) << FC_TYPE_SHIFT) | ((s) << FC_SUBTYPE_SHIFT))
 +
-+extern PORT_ATTRIBS
-+nvGetSwitchPortAttribs(uint portno);
++#define FC_ASSOC_REQ	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_REQ)
++#define FC_ASSOC_RESP	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_RESP)
++#define FC_REASSOC_REQ	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_REQ)
++#define FC_REASSOC_RESP	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_RESP)
++#define FC_PROBE_REQ	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_REQ)
++#define FC_PROBE_RESP	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_RESP)
++#define FC_BEACON	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_BEACON)
++#define FC_DISASSOC	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DISASSOC)
++#define FC_AUTH		FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_AUTH)
++#define FC_DEAUTH	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DEAUTH)
++#define FC_ACTION	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ACTION)
 +
-+#endif /* _nvports_h_ */
++#define FC_PS_POLL	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_PS_POLL)
++#define FC_RTS		FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_RTS)
++#define FC_CTS		FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CTS)
++#define FC_ACK		FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_ACK)
++#define FC_CF_END	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END)
++#define FC_CF_END_ACK	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END_ACK)
 +
++#define FC_DATA		FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA)
++#define FC_NULL_DATA	FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_NULL)
++#define FC_DATA_CF_ACK	FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA_CF_ACK)
 +
++/* Management Frames */
 +
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/osl.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/osl.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/osl.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/osl.h	2005-08-28 11:12:20.441857480 +0200
-@@ -0,0 +1,38 @@
-+/*
-+ * OS Independent Layer
-+ * 
-+ * Copyright 2001-2003, Broadcom Corporation   
-+ * All Rights Reserved.   
-+ *    
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
-+ * $Id$
-+ */
++/* Management Frame Constants */
 +
-+#ifndef _osl_h_
-+#define _osl_h_
++/* Fixed fields */
++#define DOT11_MNG_AUTH_ALGO_LEN		2
++#define DOT11_MNG_AUTH_SEQ_LEN		2
++#define DOT11_MNG_BEACON_INT_LEN	2
++#define DOT11_MNG_CAP_LEN		2
++#define DOT11_MNG_AP_ADDR_LEN		6
++#define DOT11_MNG_LISTEN_INT_LEN	2
++#define DOT11_MNG_REASON_LEN		2
++#define DOT11_MNG_AID_LEN		2
++#define DOT11_MNG_STATUS_LEN		2
++#define DOT11_MNG_TIMESTAMP_LEN		8
 +
-+#ifdef V2_HAL
-+#include <v2hal_osl.h>
-+#elif defined(linux)
-+#include <linux_osl.h>
-+#elif PMON
-+#include <pmon_osl.h>
-+#elif defined(NDIS)
-+#include <ndis_osl.h>
-+#elif defined(_CFE_)
-+#include <cfe_osl.h>
-+#elif defined(MACOS9)
-+#include <macos9_osl.h>
-+#elif defined(MACOSX)
-+#include <macosx_osl.h>
-+#else
-+#error "Unsupported OSL requested"
-+#endif
++/* DUR/ID field in assoc resp is 0xc000 | AID */
++#define DOT11_AID_MASK			0x3fff
 +
-+/* handy */
-+#define	SET_REG(r, mask, val)	W_REG((r), ((R_REG(r) & ~(mask)) | (val)))
++/* Reason Codes */
++#define DOT11_RC_RESERVED			0
++#define DOT11_RC_UNSPECIFIED			1	/* Unspecified reason */
++#define DOT11_RC_AUTH_INVAL			2	/* Previous authentication no longer valid */
++#define DOT11_RC_DEAUTH_LEAVING			3	/* Deauthenticated because sending station is
++							   leaving (or has left) IBSS or ESS */
++#define DOT11_RC_INACTIVITY			4	/* Disassociated due to inactivity */
++#define DOT11_RC_BUSY				5	/* Disassociated because AP is unable to handle
++							   all currently associated stations */
++#define DOT11_RC_INVAL_CLASS_2			6	/* Class 2 frame received from
++							   nonauthenticated station */
++#define DOT11_RC_INVAL_CLASS_3			7	/* Class 3 frame received from
++							   nonassociated station */
++#define DOT11_RC_DISASSOC_LEAVING		8	/* Disassociated because sending station is
++							   leaving (or has left) BSS */
++#define DOT11_RC_NOT_AUTH			9	/* Station requesting (re)association is
++							   not authenticated with responding station */
++#define DOT11_RC_MAX				23	/* Reason codes > 23 are reserved */
 +
-+#endif	/* _osl_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/pcicfg.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/pcicfg.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/pcicfg.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/pcicfg.h	2005-08-28 11:12:20.442857328 +0200
-@@ -0,0 +1,362 @@
-+/*
-+ * pcicfg.h: PCI configuration  constants and structures.
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
++/* Status Codes */
++#define DOT11_STATUS_SUCCESS			0	/* Successful */
++#define DOT11_STATUS_FAILURE			1	/* Unspecified failure */
++#define DOT11_STATUS_CAP_MISMATCH		10	/* Cannot support all requested capabilities
++							   in the Capability Information field */
++#define DOT11_STATUS_REASSOC_FAIL		11	/* Reassociation denied due to inability to
++							   confirm that association exists */
++#define DOT11_STATUS_ASSOC_FAIL			12	/* Association denied due to reason outside
++							   the scope of this standard */
++#define DOT11_STATUS_AUTH_MISMATCH		13	/* Responding station does not support the
++							   specified authentication algorithm */
++#define DOT11_STATUS_AUTH_SEQ			14	/* Received an Authentication frame with
++							   authentication transaction sequence number
++							   out of expected sequence */
++#define DOT11_STATUS_AUTH_CHALLENGE_FAIL	15	/* Authentication rejected because of challenge failure */
++#define DOT11_STATUS_AUTH_TIMEOUT		16	/* Authentication rejected due to timeout waiting
++							   for next frame in sequence */
++#define DOT11_STATUS_ASSOC_BUSY_FAIL		17	/* Association denied because AP is unable to
++							   handle additional associated stations */
++#define DOT11_STATUS_ASSOC_RATE_MISMATCH	18	/* Association denied due to requesting station
++							   not supporting all of the data rates in the
++							   BSSBasicRateSet parameter */
++#define DOT11_STATUS_ASSOC_SHORT_REQUIRED	19	/* Association denied due to requesting station
++							   not supporting the Short Preamble option */
++#define DOT11_STATUS_ASSOC_PBCC_REQUIRED	20	/* Association denied due to requesting station
++							   not supporting the PBCC Modulation option */
++#define DOT11_STATUS_ASSOC_AGILITY_REQUIRED	21	/* Association denied due to requesting station
++							   not supporting the Channel Agility option */
++#define DOT11_STATUS_ASSOC_SPECTRUM_REQUIRED	22	/* Association denied because Spectrum Management 
++							   capability is required. */
++#define DOT11_STATUS_ASSOC_BAD_POWER_CAP	23	/* Association denied because the info in the 
++							   Power Cap element is unacceptable. */
++#define DOT11_STATUS_ASSOC_BAD_SUP_CHANNELS	24	/* Association denied because the info in the 
++							   Supported Channel element is unacceptable */
++#define DOT11_STATUS_ASSOC_SHORTSLOT_REQUIRED	25	/* Association denied due to requesting station
++							   not supporting the Short Slot Time option */
++#define DOT11_STATUS_ASSOC_ERPBCC_REQUIRED	26	/* Association denied due to requesting station
++							   not supporting the ER-PBCC Modulation option */
++#define DOT11_STATUS_ASSOC_DSSOFDM_REQUIRED	27	/* Association denied due to requesting station
++							   not supporting the DSS-OFDM option */
 +
-+#ifndef	_h_pci_
-+#define	_h_pci_
++/* Info Elts, length of INFORMATION portion of Info Elts */
++#define DOT11_MNG_DS_PARAM_LEN			1
++#define DOT11_MNG_IBSS_PARAM_LEN		2
 +
-+/* The following inside ifndef's so we don't collide with NTDDK.H */
-+#ifndef PCI_MAX_BUS
-+#define PCI_MAX_BUS		0x100
-+#endif
-+#ifndef PCI_MAX_DEVICES
-+#define PCI_MAX_DEVICES		0x20
-+#endif
-+#ifndef PCI_MAX_FUNCTION
-+#define PCI_MAX_FUNCTION	0x8
-+#endif
-+
-+#ifndef PCI_INVALID_VENDORID
-+#define PCI_INVALID_VENDORID	0xffff
-+#endif
-+#ifndef PCI_INVALID_DEVICEID
-+#define PCI_INVALID_DEVICEID	0xffff
-+#endif
++/* TIM Info element has 3 bytes fixed info in INFORMATION field,
++ * followed by 1 to 251 bytes of Partial Virtual Bitmap */
++#define DOT11_MNG_TIM_FIXED_LEN			3
++#define DOT11_MNG_TIM_DTIM_COUNT		0
++#define DOT11_MNG_TIM_DTIM_PERIOD		1
++#define DOT11_MNG_TIM_BITMAP_CTL		2
++#define DOT11_MNG_TIM_PVB			3
 +
++/* TLV defines */
++#define TLV_TAG_OFF		0
++#define TLV_LEN_OFF		1
++#define TLV_HDR_LEN		2
++#define TLV_BODY_OFF		2
 +
-+/* Convert between bus-slot-function-register and config addresses */
++/* Management Frame Information Element IDs */
++#define DOT11_MNG_SSID_ID			0
++#define DOT11_MNG_RATES_ID			1
++#define DOT11_MNG_FH_PARMS_ID			2
++#define DOT11_MNG_DS_PARMS_ID			3
++#define DOT11_MNG_CF_PARMS_ID			4
++#define DOT11_MNG_TIM_ID			5
++#define DOT11_MNG_IBSS_PARMS_ID			6
++#define DOT11_MNG_COUNTRY_ID			7
++#define DOT11_MNG_HOPPING_PARMS_ID		8
++#define DOT11_MNG_HOPPING_TABLE_ID		9
++#define DOT11_MNG_REQUEST_ID			10
++#define DOT11_MNG_CHALLENGE_ID			16
++#define DOT11_MNG_PWR_CONSTRAINT_ID		32    /* 11H PowerConstraint	*/
++#define DOT11_MNG_PWR_CAP_ID			33    /* 11H PowerCapability	*/
++#define DOT11_MNG_TPC_REQUEST_ID 		34    /* 11H TPC Request	*/
++#define DOT11_MNG_TPC_REPORT_ID			35    /* 11H TPC Report		*/
++#define DOT11_MNG_SUPP_CHANNELS_ID		36    /* 11H Supported Channels	*/
++#define DOT11_MNG_CHANNEL_SWITCH_ID		37    /* 11H ChannelSwitch Announcement*/
++#define DOT11_MNG_MEASURE_REQUEST_ID		38    /* 11H MeasurementRequest	*/
++#define DOT11_MNG_MEASURE_REPORT_ID		39    /* 11H MeasurementReport	*/
++#define DOT11_MNG_QUIET_ID			40    /* 11H Quiet		*/
++#define DOT11_MNG_IBSS_DFS_ID			41    /* 11H IBSS_DFS 		*/
++#define DOT11_MNG_ERP_ID			42
++#define DOT11_MNG_NONERP_ID			47
++#define DOT11_MNG_EXT_RATES_ID			50
++#define DOT11_MNG_WPA_ID			221
++#define DOT11_MNG_PROPR_ID			221
 +
-+#define	PCICFG_BUS_SHIFT	16	/* Bus shift */
-+#define	PCICFG_SLOT_SHIFT	11	/* Slot shift */
-+#define	PCICFG_FUN_SHIFT	8	/* Function shift */
-+#define	PCICFG_OFF_SHIFT	0	/* Bus shift */
++/* ERP info element bit values */
++#define DOT11_MNG_ERP_LEN			1	/* ERP is currently 1 byte long */
++#define DOT11_MNG_NONERP_PRESENT		0x01	/* NonERP (802.11b) STAs are present in the BSS */
++#define DOT11_MNG_USE_PROTECTION		0x02	/* Use protection mechanisms for ERP-OFDM frames */
++#define DOT11_MNG_BARKER_PREAMBLE		0x04	/* Short Preambles: 0 == allowed, 1 == not allowed */
 +
-+#define	PCICFG_BUS_MASK		0xff	/* Bus mask */
-+#define	PCICFG_SLOT_MASK	0x1f	/* Slot mask */
-+#define	PCICFG_FUN_MASK		7	/* Function mask */
-+#define	PCICFG_OFF_MASK		0xff	/* Bus mask */
++/* Capability Information Field */
++#define DOT11_CAP_ESS				0x0001
++#define DOT11_CAP_IBSS				0x0002
++#define DOT11_CAP_POLLABLE			0x0004
++#define DOT11_CAP_POLL_RQ			0x0008
++#define DOT11_CAP_PRIVACY			0x0010
++#define DOT11_CAP_SHORT				0x0020
++#define DOT11_CAP_PBCC				0x0040
++#define DOT11_CAP_AGILITY			0x0080
++#define DOT11_CAP_SPECTRUM			0x0100
++#define DOT11_CAP_SHORTSLOT			0x0400
++#define DOT11_CAP_CCK_OFDM			0x2000
 +
-+#define	PCI_CONFIG_ADDR(b, s, f, o)					\
-+		((((b) & PCICFG_BUS_MASK) << PCICFG_BUS_SHIFT)		\
-+		 | (((s) & PCICFG_SLOT_MASK) << PCICFG_SLOT_SHIFT)	\
-+		 | (((f) & PCICFG_FUN_MASK) << PCICFG_FUN_SHIFT)	\
-+		 | (((o) & PCICFG_OFF_MASK) << PCICFG_OFF_SHIFT))
++/* Action Frame Constants */
++#define DOT11_ACTION_CAT_ERR_MASK	0x10
++#define DOT11_ACTION_CAT_SPECT_MNG	0x00
 +
-+#define	PCI_CONFIG_BUS(a)	(((a) >> PCICFG_BUS_SHIFT) & PCICFG_BUS_MASK)
-+#define	PCI_CONFIG_SLOT(a)	(((a) >> PCICFG_SLOT_SHIFT) & PCICFG_SLOT_MASK)
-+#define	PCI_CONFIG_FUN(a)	(((a) >> PCICFG_FUN_SHIFT) & PCICFG_FUN_MASK)
-+#define	PCI_CONFIG_OFF(a)	(((a) >> PCICFG_OFF_SHIFT) & PCICFG_OFF_MASK)
++#define DOT11_ACTION_ID_M_REQ		0
++#define DOT11_ACTION_ID_M_REP		1
++#define DOT11_ACTION_ID_TPC_REQ		2
++#define DOT11_ACTION_ID_TPC_REP		3
++#define DOT11_ACTION_ID_CHANNEL_SWITCH	4
 +
++/* MLME Enumerations */
++#define DOT11_BSSTYPE_INFRASTRUCTURE		0
++#define DOT11_BSSTYPE_INDEPENDENT		1
++#define DOT11_BSSTYPE_ANY			2
++#define DOT11_SCANTYPE_ACTIVE			0
++#define DOT11_SCANTYPE_PASSIVE			1
 +
-+/* The actual config space */
++/* 802.11 A PHY constants */
++#define APHY_SLOT_TIME		9
++#define APHY_SIFS_TIME		16
++#define APHY_DIFS_TIME		(APHY_SIFS_TIME + (2 * APHY_SLOT_TIME))
++#define APHY_PREAMBLE_TIME	16
++#define APHY_SIGNAL_TIME	4
++#define APHY_SYMBOL_TIME	4
++#define APHY_SERVICE_NBITS	16
++#define APHY_TAIL_NBITS		6
++#define	APHY_CWMIN		15
 +
-+#define	PCI_BAR_MAX		6
++/* 802.11 B PHY constants */
++#define BPHY_SLOT_TIME		20
++#define BPHY_SIFS_TIME		10
++#define BPHY_DIFS_TIME		50
++#define BPHY_PLCP_TIME		192
++#define BPHY_PLCP_SHORT_TIME	96
++#define	BPHY_CWMIN		31
 +
-+#define	PCI_ROM_BAR		8
++/* 802.11 G constants */
++#define DOT11_OFDM_SIGNAL_EXTENSION	6
 +
-+#define	PCR_RSVDA_MAX		2
++#define PHY_CWMAX		1023
 +
-+typedef struct _pci_config_regs {
-+    unsigned short	vendor;
-+    unsigned short	device;
-+    unsigned short	command;
-+    unsigned short	status;
-+    unsigned char	rev_id;
-+    unsigned char	prog_if;
-+    unsigned char	sub_class;
-+    unsigned char	base_class;
-+    unsigned char	cache_line_size;
-+    unsigned char	latency_timer;
-+    unsigned char	header_type;
-+    unsigned char	bist;
-+    unsigned long	base[PCI_BAR_MAX];
-+    unsigned long	cardbus_cis;
-+    unsigned short	subsys_vendor;
-+    unsigned short	subsys_id;
-+    unsigned long	baserom;
-+    unsigned long	rsvd_a[PCR_RSVDA_MAX];
-+    unsigned char	int_line;
-+    unsigned char	int_pin;
-+    unsigned char	min_gnt;
-+    unsigned char	max_lat;
-+    unsigned char	dev_dep[192];
-+} pci_config_regs;
++#define	DOT11_MAXNUMFRAGS	16	/* max # fragments per MSDU */
 +
-+#define	SZPCR		(sizeof (pci_config_regs))
-+#define	MINSZPCR	64		/* offsetof (dev_dep[0] */
++/* dot11Counters Table - 802.11 spec., Annex D */
++typedef struct d11cnt {
++	uint32		txfrag;		/* dot11TransmittedFragmentCount */
++	uint32		txmulti;	/* dot11MulticastTransmittedFrameCount */
++	uint32		txfail;		/* dot11FailedCount */
++	uint32		txretry;	/* dot11RetryCount */
++	uint32		txretrie;	/* dot11MultipleRetryCount */
++	uint32		rxdup;		/* dot11FrameduplicateCount */
++	uint32		txrts;		/* dot11RTSSuccessCount */
++	uint32		txnocts;	/* dot11RTSFailureCount */
++	uint32		txnoack;	/* dot11ACKFailureCount */
++	uint32		rxfrag;		/* dot11ReceivedFragmentCount */
++	uint32		rxmulti;	/* dot11MulticastReceivedFrameCount */
++	uint32		rxcrc;		/* dot11FCSErrorCount */
++	uint32		txfrmsnt;	/* dot11TransmittedFrameCount */
++	uint32		rxundec;	/* dot11WEPUndecryptableCount */
++} d11cnt_t;
 +
-+/* A structure for the config registers is nice, but in most
-+ * systems the config space is not memory mapped, so we need
-+ * filed offsetts. :-(
-+ */
-+#define	PCI_CFG_VID		0
-+#define	PCI_CFG_DID		2
-+#define	PCI_CFG_CMD		4
-+#define	PCI_CFG_STAT		6
-+#define	PCI_CFG_REV		8
-+#define	PCI_CFG_PROGIF		9
-+#define	PCI_CFG_SUBCL		0xa
-+#define	PCI_CFG_BASECL		0xb
-+#define	PCI_CFG_CLSZ		0xc
-+#define	PCI_CFG_LATTIM		0xd
-+#define	PCI_CFG_HDR		0xe
-+#define	PCI_CFG_BIST		0xf
-+#define	PCI_CFG_BAR0		0x10
-+#define	PCI_CFG_BAR1		0x14
-+#define	PCI_CFG_BAR2		0x18
-+#define	PCI_CFG_BAR3		0x1c
-+#define	PCI_CFG_BAR4		0x20
-+#define	PCI_CFG_BAR5		0x24
-+#define	PCI_CFG_CIS		0x28
-+#define	PCI_CFG_SVID		0x2c
-+#define	PCI_CFG_SSID		0x2e
-+#define	PCI_CFG_ROMBAR		0x30
-+#define	PCI_CFG_INT		0x3c
-+#define	PCI_CFG_PIN		0x3d
-+#define	PCI_CFG_MINGNT		0x3e
-+#define	PCI_CFG_MAXLAT		0x3f
++/* BRCM OUI */
++#define BRCM_OUI		"\x00\x10\x18"
 +
-+/* Classes and subclasses */
++/* WPA definitions */
++#define WPA_VERSION		1
++#define WPA_OUI			"\x00\x50\xF2"
 +
-+typedef enum {
-+    PCI_CLASS_OLD = 0,
-+    PCI_CLASS_DASDI,
-+    PCI_CLASS_NET,
-+    PCI_CLASS_DISPLAY,
-+    PCI_CLASS_MMEDIA,
-+    PCI_CLASS_MEMORY,
-+    PCI_CLASS_BRIDGE,
-+    PCI_CLASS_COMM,
-+    PCI_CLASS_BASE,
-+    PCI_CLASS_INPUT,
-+    PCI_CLASS_DOCK,
-+    PCI_CLASS_CPU,
-+    PCI_CLASS_SERIAL,
-+    PCI_CLASS_INTELLIGENT = 0xe,
-+    PCI_CLASS_SATELLITE,
-+    PCI_CLASS_CRYPT,
-+    PCI_CLASS_DSP,
-+    PCI_CLASS_MAX
-+} pci_classes;
++#define WPA_OUI_LEN	3
 +
-+typedef enum {
-+    PCI_DASDI_SCSI,
-+    PCI_DASDI_IDE,
-+    PCI_DASDI_FLOPPY,
-+    PCI_DASDI_IPI,
-+    PCI_DASDI_RAID,
-+    PCI_DASDI_OTHER = 0x80
-+} pci_dasdi_subclasses;
++/* WPA authentication modes */
++#define WPA_AUTH_NONE		0	/* None */
++#define WPA_AUTH_UNSPECIFIED	1	/* Unspecified authentication over 802.1X: default for WPA */
++#define WPA_AUTH_PSK		2	/* Pre-shared Key over 802.1X */
++#define WPA_AUTH_DISABLED	255	/* Legacy (i.e., non-WPA) */
++				 
++#define IS_WPA_AUTH(auth)	((auth) == WPA_AUTH_NONE || \
++				 (auth) == WPA_AUTH_UNSPECIFIED || \
++				 (auth) == WPA_AUTH_PSK)
 +
-+typedef enum {
-+    PCI_NET_ETHER,
-+    PCI_NET_TOKEN,
-+    PCI_NET_FDDI,
-+    PCI_NET_ATM,
-+    PCI_NET_OTHER = 0x80
-+} pci_net_subclasses;
 +
-+typedef enum {
-+    PCI_DISPLAY_VGA,
-+    PCI_DISPLAY_XGA,
-+    PCI_DISPLAY_3D,
-+    PCI_DISPLAY_OTHER = 0x80
-+} pci_display_subclasses;
-+
-+typedef enum {
-+    PCI_MMEDIA_VIDEO,
-+    PCI_MMEDIA_AUDIO,
-+    PCI_MMEDIA_PHONE,
-+    PCI_MEDIA_OTHER = 0x80
-+} pci_mmedia_subclasses;
-+
-+typedef enum {
-+    PCI_MEMORY_RAM,
-+    PCI_MEMORY_FLASH,
-+    PCI_MEMORY_OTHER = 0x80
-+} pci_memory_subclasses;
-+
-+typedef enum {
-+    PCI_BRIDGE_HOST,
-+    PCI_BRIDGE_ISA,
-+    PCI_BRIDGE_EISA,
-+    PCI_BRIDGE_MC,
-+    PCI_BRIDGE_PCI,
-+    PCI_BRIDGE_PCMCIA,
-+    PCI_BRIDGE_NUBUS,
-+    PCI_BRIDGE_CARDBUS,
-+    PCI_BRIDGE_RACEWAY,
-+    PCI_BRIDGE_OTHER = 0x80
-+} pci_bridge_subclasses;
-+
-+typedef enum {
-+    PCI_COMM_UART,
-+    PCI_COMM_PARALLEL,
-+    PCI_COMM_MULTIUART,
-+    PCI_COMM_MODEM,
-+    PCI_COMM_OTHER = 0x80
-+} pci_comm_subclasses;
-+
-+typedef enum {
-+    PCI_BASE_PIC,
-+    PCI_BASE_DMA,
-+    PCI_BASE_TIMER,
-+    PCI_BASE_RTC,
-+    PCI_BASE_PCI_HOTPLUG,
-+    PCI_BASE_OTHER = 0x80
-+} pci_base_subclasses;
-+
-+typedef enum {
-+    PCI_INPUT_KBD,
-+    PCI_INPUT_PEN,
-+    PCI_INPUT_MOUSE,
-+    PCI_INPUT_SCANNER,
-+    PCI_INPUT_GAMEPORT,
-+    PCI_INPUT_OTHER = 0x80
-+} pci_input_subclasses;
-+
-+typedef enum {
-+    PCI_DOCK_GENERIC,
-+    PCI_DOCK_OTHER = 0x80
-+} pci_dock_subclasses;
-+
-+typedef enum {
-+    PCI_CPU_386,
-+    PCI_CPU_486,
-+    PCI_CPU_PENTIUM,
-+    PCI_CPU_ALPHA = 0x10,
-+    PCI_CPU_POWERPC = 0x20,
-+    PCI_CPU_MIPS = 0x30,
-+    PCI_CPU_COPROC = 0x40,
-+    PCI_CPU_OTHER = 0x80
-+} pci_cpu_subclasses;
-+
-+typedef enum {
-+    PCI_SERIAL_IEEE1394,
-+    PCI_SERIAL_ACCESS,
-+    PCI_SERIAL_SSA,
-+    PCI_SERIAL_USB,
-+    PCI_SERIAL_FIBER,
-+    PCI_SERIAL_SMBUS,
-+    PCI_SERIAL_OTHER = 0x80
-+} pci_serial_subclasses;
-+
-+typedef enum {
-+    PCI_INTELLIGENT_I2O,
-+} pci_intelligent_subclasses;
-+
-+typedef enum {
-+    PCI_SATELLITE_TV,
-+    PCI_SATELLITE_AUDIO,
-+    PCI_SATELLITE_VOICE,
-+    PCI_SATELLITE_DATA,
-+    PCI_SATELLITE_OTHER = 0x80
-+} pci_satellite_subclasses;
-+
-+typedef enum {
-+    PCI_CRYPT_NETWORK,
-+    PCI_CRYPT_ENTERTAINMENT,
-+    PCI_CRYPT_OTHER = 0x80
-+} pci_crypt_subclasses;
-+
-+typedef enum {
-+    PCI_DSP_DPIO,
-+    PCI_DSP_OTHER = 0x80
-+} pci_dsp_subclasses;
-+
-+/* Header types */
-+typedef enum {
-+	PCI_HEADER_NORMAL,
-+	PCI_HEADER_BRIDGE,
-+	PCI_HEADER_CARDBUS
-+} pci_header_types;
-+
-+
-+/* Overlay for a PCI-to-PCI bridge */
-+
-+#define	PPB_RSVDA_MAX		2
-+#define	PPB_RSVDD_MAX		8
-+
-+typedef struct _ppb_config_regs {
-+    unsigned short	vendor;
-+    unsigned short	device;
-+    unsigned short	command;
-+    unsigned short	status;
-+    unsigned char	rev_id;
-+    unsigned char	prog_if;
-+    unsigned char	sub_class;
-+    unsigned char	base_class;
-+    unsigned char	cache_line_size;
-+    unsigned char	latency_timer;
-+    unsigned char	header_type;
-+    unsigned char	bist;
-+    unsigned long	rsvd_a[PPB_RSVDA_MAX];
-+    unsigned char	prim_bus;
-+    unsigned char	sec_bus;
-+    unsigned char	sub_bus;
-+    unsigned char	sec_lat;
-+    unsigned char	io_base;
-+    unsigned char	io_lim;
-+    unsigned short	sec_status;
-+    unsigned short	mem_base;
-+    unsigned short	mem_lim;
-+    unsigned short	pf_mem_base;
-+    unsigned short	pf_mem_lim;
-+    unsigned long	pf_mem_base_hi;
-+    unsigned long	pf_mem_lim_hi;
-+    unsigned short	io_base_hi;
-+    unsigned short	io_lim_hi;
-+    unsigned short	subsys_vendor;
-+    unsigned short	subsys_id;
-+    unsigned long	rsvd_b;
-+    unsigned char	rsvd_c;
-+    unsigned char	int_pin;
-+    unsigned short	bridge_ctrl;
-+    unsigned char	chip_ctrl;
-+    unsigned char	diag_ctrl;
-+    unsigned short	arb_ctrl;
-+    unsigned long	rsvd_d[PPB_RSVDD_MAX];
-+    unsigned char	dev_dep[192];
-+} ppb_config_regs;
-+
-+/* Eveything below is BRCM HND proprietary */
-+
-+#define	PCI_BAR0_WIN		0x80	/* backplane addres space accessed by BAR0 */
-+#define	PCI_BAR1_WIN		0x84	/* backplane addres space accessed by BAR1 */
-+#define	PCI_SPROM_CONTROL	0x88	/* sprom property control */
-+#define	PCI_BAR1_CONTROL	0x8c	/* BAR1 region burst control */
-+#define	PCI_INT_STATUS		0x90	/* PCI and other cores interrupts */
-+#define	PCI_INT_MASK		0x94	/* mask of PCI and other cores interrupts */
-+#define PCI_TO_SB_MB		0x98	/* signal backplane interrupts */
-+#define PCI_BACKPLANE_ADDR	0xA0	/* address an arbitrary location on the system backplane */
-+#define PCI_BACKPLANE_DATA	0xA4	/* data at the location specified by above address register */
-+#define	PCI_GPIO_IN		0xb0	/* pci config space gpio input (>=rev3) */
-+#define	PCI_GPIO_OUT		0xb4	/* pci config space gpio output (>=rev3) */
-+#define	PCI_GPIO_OUTEN		0xb8	/* pci config space gpio output enable (>=rev3) */
-+
-+#define	PCI_BAR0_SPROM_OFFSET	(4 * 1024)	/* bar0 + 4K accesses external sprom */
-+#define	PCI_BAR0_PCIREGS_OFFSET	(6 * 1024)	/* bar0 + 6K accesses pci core registers */
-+
-+/* PCI_INT_MASK */
-+#define	PCI_SBIM_SHIFT		8	/* backplane core interrupt mask bits offset */
-+#define	PCI_SBIM_MASK		0xff00	/* backplane core interrupt mask */
-+
-+/* PCI_SPROM_CONTROL */
-+#define	SPROM_BLANK		0x04  	/* indicating a blank sprom */
-+#define SPROM_WRITEEN		0x10	/* sprom write enable */
-+#define SPROM_BOOTROM_WE	0x20	/* external bootrom write enable */
++/* Key related defines */
++#define DOT11_MAX_KEY_SIZE	32	/* max size of any key */
++#define DOT11_MAX_IV_SIZE	16	/* max size of any IV */
++#define DOT11_EXT_IV_FLAG	(1<<5)	/* flag to indicate IV is > 4 bytes */
 +
-+#define	SPROM_SIZE		256	/* sprom size in 16-bit */
-+#define SPROM_CRC_RANGE		64	/* crc cover range in 16-bit */
++#define WEP1_KEY_SIZE		5	/* max size of any WEP key */
++#define WEP1_KEY_HEX_SIZE	10	/* size of WEP key in hex. */
++#define WEP128_KEY_SIZE		13	/* max size of any WEP key */
++#define WEP128_KEY_HEX_SIZE	26	/* size of WEP key in hex. */
++#define TKIP_MIC_SIZE		8	/* size of TKIP MIC */
++#define TKIP_EOM_SIZE		7	/* max size of TKIP EOM */
++#define TKIP_EOM_FLAG		0x5a	/* TKIP EOM flag byte */
++#define TKIP_KEY_SIZE		32	/* size of any TKIP key */
++#define TKIP_MIC_AUTH_TX	16	/* offset to Authenticator MIC TX key */
++#define TKIP_MIC_AUTH_RX	24	/* offset to Authenticator MIC RX key */
++#define TKIP_MIC_SUP_RX		16	/* offset to Supplicant MIC RX key */
++#define TKIP_MIC_SUP_TX		24	/* offset to Supplicant MIC TX key */
++#define AES_KEY_SIZE		16	/* size of AES key */
 +
++#undef PACKED
++#if !defined(__GNUC__)
++#pragma pack()
 +#endif
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/proto/802.11.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/proto/802.11.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/proto/802.11.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/proto/802.11.h	2005-08-28 11:12:20.450856112 +0200
-@@ -0,0 +1,679 @@
-+/*
++
++#endif /* _802_11_H_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/proto/ethernet.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/proto/ethernet.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/proto/ethernet.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/proto/ethernet.h	2005-09-16 10:29:18.205587232 +0200
+@@ -0,0 +1,145 @@
++/*******************************************************************************
++ * $Id$
 + * Copyright 2001-2003, Broadcom Corporation   
 + * All Rights Reserved.   
 + *    
@@ -10719,7384 +9723,3316 @@ diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/proto/802.11.h linux-2.6.12.
 + * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
 + * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
 + * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
-+ *
-+ * Fundamental types and constants relating to 802.11 
-+ *
-+ * $Id$
-+ */
++ * From FreeBSD 2.2.7: Fundamental constants relating to ethernet.
++ ******************************************************************************/
 +
-+#ifndef _802_11_H_
-+#define _802_11_H_
++#ifndef _NET_ETHERNET_H_	    /* use native BSD ethernet.h when available */
++#define _NET_ETHERNET_H_
 +
 +#ifndef _TYPEDEFS_H_
-+#include <typedefs.h>
-+#endif
-+
-+#ifndef _NET_ETHERNET_H_
-+#include <proto/ethernet.h>
-+#endif
-+
-+/* enable structure packing */
-+#if !defined(__GNUC__)
-+#pragma pack(1)
++#include "typedefs.h"
 +#endif
 +
-+/* some platforms require stronger medicine */
 +#if defined(__GNUC__)
 +#define	PACKED	__attribute__((packed))
 +#else
 +#define	PACKED
 +#endif
 +
++/*
++ * The number of bytes in an ethernet (MAC) address.
++ */
++#define	ETHER_ADDR_LEN		6
 +
-+#define DOT11_TU_TO_US			1024	/* 802.11 Time Unit is 1024 microseconds */
++/*
++ * The number of bytes in the type field.
++ */
++#define	ETHER_TYPE_LEN		2
 +
-+/* Generic 802.11 frame constants */
-+#define DOT11_A3_HDR_LEN		24
-+#define DOT11_A4_HDR_LEN		30
-+#define DOT11_MAC_HDR_LEN		DOT11_A3_HDR_LEN
-+#define DOT11_FCS_LEN			4
-+#define DOT11_ICV_LEN			4
-+#define DOT11_ICV_AES_LEN		8
++/*
++ * The number of bytes in the trailing CRC field.
++ */
++#define	ETHER_CRC_LEN		4
 +
++/*
++ * The length of the combined header.
++ */
++#define	ETHER_HDR_LEN		(ETHER_ADDR_LEN*2+ETHER_TYPE_LEN)
 +
-+#define DOT11_KEY_INDEX_SHIFT		6
-+#define DOT11_IV_LEN			4
-+#define DOT11_IV_TKIP_LEN		8
-+#define DOT11_IV_AES_OCB_LEN		4
-+#define DOT11_IV_AES_CCM_LEN		8
++/*
++ * The minimum packet length.
++ */
++#define	ETHER_MIN_LEN		64
 +
-+#define DOT11_MAX_MPDU_BODY_LEN		2312
-+#define DOT11_MAX_MPDU_LEN		2346	/* body len + A4 hdr + FCS */
-+#define DOT11_MAX_SSID_LEN		32
++/*
++ * The minimum packet user data length.
++ */
++#define	ETHER_MIN_DATA		46
 +
-+/* dot11RTSThreshold */
-+#define DOT11_DEFAULT_RTS_LEN		2347
-+#define DOT11_MAX_RTS_LEN		2347
++/*
++ * The maximum packet length.
++ */
++#define	ETHER_MAX_LEN		1518
 +
-+/* dot11FragmentationThreshold */
-+#define DOT11_MIN_FRAG_LEN		256
-+#define DOT11_MAX_FRAG_LEN		2346	/* Max frag is also limited by aMPDUMaxLength of the attached PHY */
-+#define DOT11_DEFAULT_FRAG_LEN		2346
++/*
++ * The maximum packet user data length.
++ */
++#define	ETHER_MAX_DATA		1500
 +
-+/* dot11BeaconPeriod */
-+#define DOT11_MIN_BEACON_PERIOD		1
-+#define DOT11_MAX_BEACON_PERIOD		0xFFFF
++/*
++ * Used to uniquely identify a 802.1q VLAN-tagged header.
++ */
++#define	VLAN_TAG			0x8100
 +
-+/* dot11DTIMPeriod */
-+#define DOT11_MIN_DTIM_PERIOD		1
-+#define DOT11_MAX_DTIM_PERIOD		0xFF
++/*
++ * Located after dest & src address in ether header.
++ */
++#define VLAN_FIELDS_OFFSET		(ETHER_ADDR_LEN * 2)
 +
-+/* 802.2 LLC/SNAP header used by 802.11 per 802.1H */
-+#define DOT11_LLC_SNAP_HDR_LEN	8
-+#define DOT11_OUI_LEN			3
-+struct dot11_llc_snap_header {
-+	uint8	dsap;				/* always 0xAA */
-+	uint8	ssap;				/* always 0xAA */
-+	uint8	ctl;				/* always 0x03 */
-+	uint8	oui[DOT11_OUI_LEN];		/* RFC1042: 0x00 0x00 0x00
-+						   Bridge-Tunnel: 0x00 0x00 0xF8 */
-+	uint16	type;				/* ethertype */
-+} PACKED;
++/*
++ * 4 bytes of vlan field info.
++ */
++#define VLAN_FIELDS_SIZE		4
 +
-+/* RFC1042 header used by 802.11 per 802.1H */
-+#define RFC1042_HDR_LEN			(ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN)
++/* location of pri bits in 16-bit vlan fields */
++#define VLAN_PRI_SHIFT			13
++
++/* 3 bits of priority */
++#define VLAN_PRI_MASK			7
++
++/* 802.1X ethertype */
++#define ETHER_TYPE_802_1X	0x888e
 +
-+/* Generic 802.11 MAC header */
 +/*
-+ * N.B.: This struct reflects the full 4 address 802.11 MAC header.
-+ *		 The fields are defined such that the shorter 1, 2, and 3
-+ *		 address headers just use the first k fields.
++ * A macro to validate a length with
 + */
-+struct dot11_header {
-+	uint16			fc;		/* frame control */
-+	uint16			durid;		/* duration/ID */
-+	struct ether_addr	a1;		/* address 1 */
-+	struct ether_addr	a2;		/* address 2 */
-+	struct ether_addr	a3;		/* address 3 */
-+	uint16			seq;		/* sequence control */
-+	struct ether_addr	a4;		/* address 4 */
-+} PACKED;
++#define	ETHER_IS_VALID_LEN(foo)	\
++	((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN)
 +
-+/* Control frames */
 +
-+struct dot11_rts_frame {
-+	uint16			fc;		/* frame control */
-+	uint16			durid;		/* duration/ID */
-+	struct ether_addr	ra;		/* receiver address */
-+	struct ether_addr	ta;		/* transmitter address */
-+} PACKED;
-+#define	DOT11_RTS_LEN		16
++#ifndef __INCif_etherh     /* Quick and ugly hack for VxWorks */
++/*
++ * Structure of a 10Mb/s Ethernet header.
++ */
++struct	ether_header {
++	uint8	ether_dhost[ETHER_ADDR_LEN];
++	uint8	ether_shost[ETHER_ADDR_LEN];
++	uint16	ether_type;
++} PACKED ;
 +
-+struct dot11_cts_frame {
-+	uint16			fc;		/* frame control */
-+	uint16			durid;		/* duration/ID */
-+	struct ether_addr	ra;		/* receiver address */
-+} PACKED;
-+#define	DOT11_CTS_LEN		10
++/*
++ * Structure of a 48-bit Ethernet address.
++ */
++struct	ether_addr {
++	uint8 octet[ETHER_ADDR_LEN];
++} PACKED ;
++#endif
 +
-+struct dot11_ack_frame {
-+	uint16			fc;		/* frame control */
-+	uint16			durid;		/* duration/ID */
-+	struct ether_addr	ra;		/* receiver address */
-+} PACKED;
-+#define	DOT11_ACK_LEN		10
++/*
++ * Takes a pointer, returns true if a 48-bit multicast address
++ * (including broadcast, since it is all ones)
++ */
++#define ETHER_ISMULTI(ea) (((uint8 *)(ea))[0] & 1)
 +
-+struct dot11_ps_poll_frame {
-+	uint16			fc;		/* frame control */
-+	uint16			durid;		/* AID */
-+	struct ether_addr	bssid;		/* receiver address, STA in AP */
-+	struct ether_addr	ta;		/* transmitter address */
-+} PACKED;
-+#define	DOT11_PS_POLL_LEN	16
++/*
++ * Takes a pointer, returns true if a 48-bit broadcast (all ones)
++ */
++#define ETHER_ISBCAST(ea) ((((uint8 *)(ea))[0] &		\
++			    ((uint8 *)(ea))[1] &		\
++			    ((uint8 *)(ea))[2] &		\
++			    ((uint8 *)(ea))[3] &		\
++			    ((uint8 *)(ea))[4] &		\
++			    ((uint8 *)(ea))[5]) == 0xff)
 +
-+struct dot11_cf_end_frame {
-+	uint16			fc;		/* frame control */
-+	uint16			durid;		/* duration/ID */
-+	struct ether_addr	ra;		/* receiver address */
-+	struct ether_addr	bssid;		/* transmitter address, STA in AP */
-+} PACKED;
-+#define	DOT11_CS_END_LEN	16
++static const struct ether_addr ether_bcast = {{255, 255, 255, 255, 255, 255}};
 +
-+/* Management frame header */
-+struct dot11_management_header {
-+	uint16			fc;		/* frame control */
-+	uint16			durid;		/* duration/ID */
-+	struct ether_addr	da;		/* receiver address */
-+	struct ether_addr	sa;		/* transmitter address */
-+	struct ether_addr	bssid;		/* BSS ID */
-+	uint16			seq;		/* sequence control */
-+} PACKED;
-+#define	DOT11_MGMT_HDR_LEN	24
++/*
++ * Takes a pointer, returns true if a 48-bit null address (all zeros)
++ */
++#define ETHER_ISNULLADDR(ea) ((((uint8 *)(ea))[0] |		\
++			    ((uint8 *)(ea))[1] |		\
++			    ((uint8 *)(ea))[2] |		\
++			    ((uint8 *)(ea))[3] |		\
++			    ((uint8 *)(ea))[4] |		\
++			    ((uint8 *)(ea))[5]) == 0)
 +
-+/* Management frame payloads */
++#undef PACKED
 +
-+struct dot11_bcn_prb {
-+	uint32			timestamp[2];
-+	uint16			beacon_interval;
-+	uint16			capability;
-+} PACKED;
-+#define	DOT11_BCN_PRB_LEN	12
++#endif /* _NET_ETHERNET_H_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/rts/crc.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/rts/crc.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/rts/crc.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/rts/crc.h	2005-09-16 10:29:18.205587232 +0200
+@@ -0,0 +1,69 @@
++/*******************************************************************************
++ * $Id$
++ * Copyright 2001-2003, Broadcom Corporation   
++ * All Rights Reserved.   
++ *    
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
++ * crc.h - a function to compute crc for iLine10 headers
++ ******************************************************************************/
 +
-+struct dot11_auth {
-+	uint16			alg;		/* algorithm */
-+	uint16			seq;		/* sequence control */
-+	uint16			status;		/* status code */
-+} PACKED;
-+#define DOT11_AUTH_FIXED_LEN	6		/* length of auth frame without challenge info elt */
++#ifndef _RTS_CRC_H_
++#define _RTS_CRC_H_ 1
 +
-+struct dot11_assoc_req {
-+	uint16			capability;	/* capability information */
-+	uint16			listen;		/* listen interval */
-+} PACKED;
++#include "typedefs.h"
 +
-+struct dot11_assoc_resp {
-+	uint16			capability;	/* capability information */
-+	uint16			status;		/* status code */
-+	uint16			aid;		/* association ID */
-+} PACKED;
++#ifdef __cplusplus
++extern "C" {
++#endif
 +
-+struct dot11_action_measure {
-+	uint8	category;
-+	uint8	action;
-+	uint8	token;
-+	uint8	data[1];
-+} PACKED;
-+#define DOT11_ACTION_MEASURE_LEN	3
 +
-+/**************
-+  802.11h related definitions.
-+**************/
-+typedef struct {
-+	uint8 id;
-+	uint8 len;
-+	uint8 power;
-+} dot11_power_cnst_t;
++#define CRC8_INIT_VALUE  0xff       /* Initial CRC8 checksum value */
++#define CRC8_GOOD_VALUE  0x9f       /* Good final CRC8 checksum value */
++#define HCS_GOOD_VALUE   0x39       /* Good final header checksum value */
 +
-+typedef struct {
-+	uint8 min;
-+	uint8 max;
-+} dot11_power_cap_t;
++#define CRC16_INIT_VALUE 0xffff     /* Initial CRC16 checksum value */
++#define CRC16_GOOD_VALUE 0xf0b8     /* Good final CRC16 checksum value */
 +
-+typedef struct {
-+	uint8 id;
-+	uint8 len;
-+	uint8 tx_pwr;
-+	uint8 margin;
-+} dot11_tpc_rep_t;
-+#define DOT11_MNG_IE_TPC_REPORT_LEN	2	/* length of IE data, not including 2 byte header */
-+
-+typedef struct {
-+	uint8 id;
-+	uint8 len;
-+	uint8 first_channel;
-+	uint8 num_channels;
-+} dot11_supp_channels_t;
++#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
++#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */
 +
-+struct dot11_channel_switch {
-+	uint8 id;
-+	uint8 len;
-+	uint8 mode;
-+	uint8 channel;
-+	uint8 count;
-+}  PACKED;
-+typedef struct dot11_channel_switch dot11_channel_switch_t;
++void   hcs(uint8 *, uint);
++uint8  crc8(uint8 *, uint, uint8);
++uint16 crc16(uint8 *, uint, uint16);
++uint32 crc32(uint8 *, uint, uint32);
 +
-+/* 802.11h Measurement Request/Report IEs */
-+/* Measurement Type field */
-+#define DOT11_MEASURE_TYPE_BASIC 	0
-+#define DOT11_MEASURE_TYPE_CCA 		1
-+#define DOT11_MEASURE_TYPE_RPI	 	2
++/* macros for common usage */
 +
-+/* Measurement Mode field */
++#define APPEND_CRC8(pbytes, nbytes)                           \
++do {                                                          \
++    uint8 tmp = crc8(pbytes, nbytes, CRC8_INIT_VALUE) ^ 0xff; \
++    (pbytes)[(nbytes)] = tmp;                                 \
++    (nbytes) += 1;                                            \
++} while (0)
 +
-+/* Measurement Request Modes */
-+#define DOT11_MEASURE_MODE_ENABLE 	(1<<1)
-+#define DOT11_MEASURE_MODE_REQUEST	(1<<2)
-+#define DOT11_MEASURE_MODE_REPORT 	(1<<3)
-+/* Measurement Report Modes */
-+#define DOT11_MEASURE_MODE_LATE 	(1<<0)
-+#define DOT11_MEASURE_MODE_INCAPABLE	(1<<1)
-+#define DOT11_MEASURE_MODE_REFUSED	(1<<2)
-+/* Basic Measurement Map bits */
-+#define DOT11_MEASURE_BASIC_MAP_BSS	((uint8)(1<<0))
-+#define DOT11_MEASURE_BASIC_MAP_OFDM	((uint8)(1<<1))
-+#define DOT11_MEASURE_BASIC_MAP_UKNOWN	((uint8)(1<<2))
-+#define DOT11_MEASURE_BASIC_MAP_RADAR	((uint8)(1<<3))
-+#define DOT11_MEASURE_BASIC_MAP_UNMEAS	((uint8)(1<<4))
++#define APPEND_CRC16(pbytes, nbytes)                               \
++do {                                                               \
++    uint16 tmp = crc16(pbytes, nbytes, CRC16_INIT_VALUE) ^ 0xffff; \
++    (pbytes)[(nbytes) + 0] = (tmp >> 0) & 0xff;                    \
++    (pbytes)[(nbytes) + 1] = (tmp >> 8) & 0xff;                    \
++    (nbytes) += 2;                                                 \
++} while (0)
 +
-+typedef struct {
-+	uint8 id;
-+	uint8 len;
-+	uint8 token;
-+	uint8 mode;
-+	uint8 type;
-+	uint8 channel;
-+	uint8 start_time[8];
-+	uint16 duration;
-+} dot11_meas_req_t;
-+#define DOT11_MNG_IE_MREQ_LEN 14
-+/* length of Measure Request IE data not including variable len */
-+#define DOT11_MNG_IE_MREQ_FIXED_LEN 3
++#define APPEND_CRC32(pbytes, nbytes)                                   \
++do {                                                                   \
++    uint32 tmp = crc32(pbytes, nbytes, CRC32_INIT_VALUE) ^ 0xffffffff; \
++    (pbytes)[(nbytes) + 0] = (tmp >>  0) & 0xff;                       \
++    (pbytes)[(nbytes) + 1] = (tmp >>  8) & 0xff;                       \
++    (pbytes)[(nbytes) + 2] = (tmp >> 16) & 0xff;                       \
++    (pbytes)[(nbytes) + 3] = (tmp >> 24) & 0xff;                       \
++    (nbytes) += 4;                                                     \
++} while (0)
 +
-+struct dot11_meas_rep {
-+	uint8 id;
-+	uint8 len;
-+	uint8 token;
-+	uint8 mode;
-+	uint8 type;
-+	union 
-+	{
-+		struct {
-+			uint8 channel;
-+			uint8 start_time[8];
-+			uint16 duration;
-+			uint8 map;
-+		} PACKED basic;
-+		uint8 data[1];
-+	} PACKED rep;
-+} PACKED;
-+typedef struct dot11_meas_rep dot11_meas_rep_t;
++#ifdef __cplusplus
++}
++#endif
 +
-+/* length of Measure Report IE data not including variable len */
-+#define DOT11_MNG_IE_MREP_FIXED_LEN	3
++#endif /* _RTS_CRC_H_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/s5.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/s5.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/s5.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/s5.h	2005-09-16 10:29:18.206587080 +0200
+@@ -0,0 +1,103 @@
++#ifndef _S5_H_
++#define _S5_H_
++/*
++ *   Copyright 2003, Broadcom Corporation
++ *   All Rights Reserved.
++ * 
++ *   Broadcom Sentry5 (S5) BCM5365, 53xx, BCM58xx SOC Internal Core
++ *   and MIPS3301 (R4K) System Address Space
++ *
++ *   This program is free software; you can redistribute it and/or
++ *   modify it under the terms of the GNU General Public License as
++ *   published by the Free Software Foundation, located in the file
++ *   LICENSE.
++ *
++ *   $Id: s5.h,v 1.3 2003/06/10 18:54:51 jfd Exp $
++ * 
++ */
 +
-+struct dot11_meas_rep_basic {
-+	uint8 channel;
-+	uint8 start_time[8];
-+	uint16 duration;
-+	uint8 map;
-+} PACKED;
-+typedef struct dot11_meas_rep_basic dot11_meas_rep_basic_t;
-+#define DOT11_MEASURE_BASIC_REP_LEN	12
++/* BCM5365 Address map */
++#define KSEG1ADDR(x)    ( (x) | 0xa0000000)
++#define BCM5365_SDRAM		0x00000000 /* 0-128MB Physical SDRAM */
++#define BCM5365_PCI_MEM		0x08000000 /* Host Mode PCI mem space (64MB) */
++#define BCM5365_PCI_CFG		0x0c000000 /* Host Mode PCI cfg space (64MB) */
++#define BCM5365_PCI_DMA		0x40000000 /* Client Mode PCI mem space (1GB)*/
++#define	BCM5365_SDRAM_SWAPPED	0x10000000 /* Byteswapped Physical SDRAM */
++#define BCM5365_ENUM		0x18000000 /* Beginning of core enum space */
 +
-+struct dot11_quiet {
-+	uint8 id;
-+	uint8 len;
-+	uint8 count;	/* TBTTs until beacon interval in quiet starts */
-+	uint8 period;	/* Beacon intervals between periodic quiet periods ? */
-+	uint16 duration;/* Length of quiet period, in TU's */
-+	uint16 offset;	/* TU's offset from TBTT in Count field */
-+} PACKED;
-+typedef struct dot11_quiet dot11_quiet_t;
++/* BCM5365 Core register space */
++#define BCM5365_REG_CHIPC	0x18000000 /* Chipcommon  registers */
++#define BCM5365_REG_EMAC0	0x18001000 /* Ethernet MAC0 core registers */
++#define BCM5365_REG_IPSEC	0x18002000 /* BCM582x CryptoCore registers */
++#define BCM5365_REG_USB		0x18003000 /* USB core registers */
++#define BCM5365_REG_PCI		0x18004000 /* PCI core registers */
++#define BCM5365_REG_MIPS33	0x18005000 /* MIPS core registers */
++#define BCM5365_REG_MEMC	0x18006000 /* MEMC core registers */
++#define BCM5365_REG_UARTS       (BCM5365_REG_CHIPC + 0x300) /* UART regs */
++#define	BCM5365_EJTAG		0xff200000 /* MIPS EJTAG space (2M) */
 +
-+typedef struct {
-+	uint8 channel;
-+	uint8 map;
-+} chan_map_tuple_t;
++/* COM Ports 1/2 */
++#define	BCM5365_UART		(BCM5365_REG_UARTS)
++#define BCM5365_UART_COM2	(BCM5365_REG_UARTS + 0x00000100)
 +
-+typedef struct {
-+	uint8 id;
-+	uint8 len;
-+	uint8 eaddr[ETHER_ADDR_LEN];
-+	uint8 interval;
-+	chan_map_tuple_t map[1];
-+} dot11_ibss_dfs_t;
++/* Registers common to MIPS33 Core used in 5365 */
++#define MIPS33_FLASH_REGION           0x1fc00000 /* Boot FLASH Region  */
++#define MIPS33_EXTIF_REGION           0x1a000000 /* Chipcommon EXTIF region*/
++#define BCM5365_EXTIF                 0x1b000000 /* MISC_CS */
++#define MIPS33_FLASH_REGION_AUX       0x1c000000 /* FLASH Region 2*/
 +
++/* Internal Core Sonics Backplane Devices */
++#define INTERNAL_UART_COM1            BCM5365_UART
++#define INTERNAL_UART_COM2            BCM5365_UART_COM2
++#define SB_REG_CHIPC                  BCM5365_REG_CHIPC
++#define SB_REG_ENET0                  BCM5365_REG_EMAC0
++#define SB_REG_IPSEC                  BCM5365_REG_IPSEC
++#define SB_REG_USB                    BCM5365_REG_USB
++#define SB_REG_PCI                    BCM5365_REG_PCI
++#define SB_REG_MIPS                   BCM5365_REG_MIPS33
++#define SB_REG_MEMC                   BCM5365_REG_MEMC
++#define SB_REG_MEMC_OFF               0x6000
++#define SB_EXTIF_SPACE                MIPS33_EXTIF_REGION
++#define SB_FLASH_SPACE                MIPS33_FLASH_REGION
 +
-+/* Macro to take a pointer to a beacon or probe response
-+ * header and return the char* pointer to the SSID info element
++/*
++ * XXX
++ * 5365-specific backplane interrupt flag numbers.  This should be done
++ * dynamically instead.
 + */
-+#define BCN_PRB_SSID(hdr) ((char*)(hdr) + DOT11_MGMT_HDR_LEN + DOT11_BCN_PRB_LEN)
++#define	SBFLAG_PCI	0
++#define	SBFLAG_ENET0	1
++#define	SBFLAG_ILINE20	2
++#define	SBFLAG_CODEC	3
++#define	SBFLAG_USB	4
++#define	SBFLAG_EXTIF	5
++#define	SBFLAG_ENET1	6
 +
-+/* Authentication frame payload constants */
-+#define DOT11_OPEN_SYSTEM	0
-+#define DOT11_SHARED_KEY	1
-+#define DOT11_CHALLENGE_LEN	128
++/* BCM95365 Local Bus devices */
++#define BCM95365K_RESET_ADDR    	 BCM5365_EXTIF
++#define BCM95365K_BOARDID_ADDR  	(BCM5365_EXTIF | 0x4000)
++#define BCM95365K_DOC_ADDR      	(BCM5365_EXTIF | 0x6000)
++#define BCM95365K_LED_ADDR      	(BCM5365_EXTIF | 0xc000)
++#define BCM95365K_TOD_REG_BASE          (BCM95365K_NVRAM_ADDR | 0x1ff0)
++#define BCM95365K_NVRAM_ADDR    	(BCM5365_EXTIF | 0xe000)
++#define BCM95365K_NVRAM_SIZE             0x1ff0 /* 8K NVRAM : DS1743/STM48txx*/
 +
-+/* Frame control macros */
-+#define FC_PVER_MASK		0x3
-+#define FC_PVER_SHIFT		0
-+#define FC_TYPE_MASK		0xC
-+#define FC_TYPE_SHIFT		2
-+#define FC_SUBTYPE_MASK		0xF0
-+#define FC_SUBTYPE_SHIFT	4
-+#define FC_TODS			0x100
-+#define FC_TODS_SHIFT		8
-+#define FC_FROMDS		0x200
-+#define FC_FROMDS_SHIFT		9
-+#define FC_MOREFRAG		0x400
-+#define FC_MOREFRAG_SHIFT	10
-+#define FC_RETRY		0x800
-+#define FC_RETRY_SHIFT		11
-+#define FC_PM			0x1000
-+#define FC_PM_SHIFT		12
-+#define FC_MOREDATA		0x2000
-+#define FC_MOREDATA_SHIFT	13
-+#define FC_WEP			0x4000
-+#define FC_WEP_SHIFT		14
-+#define FC_ORDER		0x8000
-+#define FC_ORDER_SHIFT		15
++/* Write to DLR2416 VFD Display character RAM */
++#define LED_REG(x)      \
++ (*(volatile unsigned char *) (KSEG1ADDR(BCM95365K_LED_ADDR) + (x)))
 +
-+/* sequence control macros */
-+#define SEQNUM_SHIFT		4
-+#define FRAGNUM_MASK		0xF
++#ifdef	CONFIG_VSIM
++#define	BCM5365_TRACE(trval)        do { *((int *)0xa0002ff8) = (trval); \
++                                       } while (0)
++#else
++#define	BCM5365_TRACE(trval)        do { *((unsigned char *)\
++                                         KSEG1ADDR(BCM5365K_LED_ADDR)) = (trval); \
++				    *((int *)0xa0002ff8) = (trval); } while (0)
++#endif
 +
-+/* Frame Control type/subtype defs */
++/* BCM9536R Local Bus devices */
++#define BCM95365R_DOC_ADDR      	BCM5365_EXTIF
 +
-+/* FC Types */
-+#define FC_TYPE_MNG		0
-+#define FC_TYPE_CTL		1
-+#define FC_TYPE_DATA		2
-+
-+/* Management Subtypes */
-+#define FC_SUBTYPE_ASSOC_REQ		0
-+#define FC_SUBTYPE_ASSOC_RESP		1
-+#define FC_SUBTYPE_REASSOC_REQ		2
-+#define FC_SUBTYPE_REASSOC_RESP		3
-+#define FC_SUBTYPE_PROBE_REQ		4
-+#define FC_SUBTYPE_PROBE_RESP		5
-+#define FC_SUBTYPE_BEACON		8
-+#define FC_SUBTYPE_ATIM			9
-+#define FC_SUBTYPE_DISASSOC		10
-+#define FC_SUBTYPE_AUTH			11
-+#define FC_SUBTYPE_DEAUTH		12
-+#define FC_SUBTYPE_ACTION		13
-+
-+/* Control Subtypes */
-+#define FC_SUBTYPE_PS_POLL		10
-+#define FC_SUBTYPE_RTS			11
-+#define FC_SUBTYPE_CTS			12
-+#define FC_SUBTYPE_ACK			13
-+#define FC_SUBTYPE_CF_END		14
-+#define FC_SUBTYPE_CF_END_ACK		15
-+
-+/* Data Subtypes */
-+#define FC_SUBTYPE_DATA			0
-+#define FC_SUBTYPE_DATA_CF_ACK		1
-+#define FC_SUBTYPE_DATA_CF_POLL		2
-+#define FC_SUBTYPE_DATA_CF_ACK_POLL	3
-+#define FC_SUBTYPE_NULL			4
-+#define FC_SUBTYPE_CF_ACK		5
-+#define FC_SUBTYPE_CF_POLL		6
-+#define FC_SUBTYPE_CF_ACK_POLL		7
-+
-+/* type-subtype combos */
-+#define FC_KIND_MASK		(FC_TYPE_MASK | FC_SUBTYPE_MASK)
-+
-+#define FC_KIND(t, s) (((t) << FC_TYPE_SHIFT) | ((s) << FC_SUBTYPE_SHIFT))
-+
-+#define FC_ASSOC_REQ	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_REQ)
-+#define FC_ASSOC_RESP	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ASSOC_RESP)
-+#define FC_REASSOC_REQ	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_REQ)
-+#define FC_REASSOC_RESP	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_REASSOC_RESP)
-+#define FC_PROBE_REQ	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_REQ)
-+#define FC_PROBE_RESP	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_PROBE_RESP)
-+#define FC_BEACON	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_BEACON)
-+#define FC_DISASSOC	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DISASSOC)
-+#define FC_AUTH		FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_AUTH)
-+#define FC_DEAUTH	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_DEAUTH)
-+#define FC_ACTION	FC_KIND(FC_TYPE_MNG, FC_SUBTYPE_ACTION)
-+
-+#define FC_PS_POLL	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_PS_POLL)
-+#define FC_RTS		FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_RTS)
-+#define FC_CTS		FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CTS)
-+#define FC_ACK		FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_ACK)
-+#define FC_CF_END	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END)
-+#define FC_CF_END_ACK	FC_KIND(FC_TYPE_CTL, FC_SUBTYPE_CF_END_ACK)
 +
-+#define FC_DATA		FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA)
-+#define FC_NULL_DATA	FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_NULL)
-+#define FC_DATA_CF_ACK	FC_KIND(FC_TYPE_DATA, FC_SUBTYPE_DATA_CF_ACK)
 +
-+/* Management Frames */
++#endif /*!_S5_H_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbchipc.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbchipc.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/sbchipc.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbchipc.h	2005-09-16 10:29:18.207586928 +0200
+@@ -0,0 +1,281 @@
++/*
++ * SiliconBackplane Chipcommon core hardware definitions.
++ *
++ * The chipcommon core provides chip identification, SB control,
++ * jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer,
++ * gpio interface, extbus, and support for serial and parallel flashes.
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ * 
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id$
++ */
 +
-+/* Management Frame Constants */
++#ifndef	_SBCHIPC_H
++#define	_SBCHIPC_H
 +
-+/* Fixed fields */
-+#define DOT11_MNG_AUTH_ALGO_LEN		2
-+#define DOT11_MNG_AUTH_SEQ_LEN		2
-+#define DOT11_MNG_BEACON_INT_LEN	2
-+#define DOT11_MNG_CAP_LEN		2
-+#define DOT11_MNG_AP_ADDR_LEN		6
-+#define DOT11_MNG_LISTEN_INT_LEN	2
-+#define DOT11_MNG_REASON_LEN		2
-+#define DOT11_MNG_AID_LEN		2
-+#define DOT11_MNG_STATUS_LEN		2
-+#define DOT11_MNG_TIMESTAMP_LEN		8
 +
-+/* DUR/ID field in assoc resp is 0xc000 | AID */
-+#define DOT11_AID_MASK			0x3fff
++/* cpp contortions to concatenate w/arg prescan */
++#ifndef PAD
++#define	_PADLINE(line)	pad ## line
++#define	_XSTR(line)	_PADLINE(line)
++#define	PAD		_XSTR(__LINE__)
++#endif	/* PAD */
 +
-+/* Reason Codes */
-+#define DOT11_RC_RESERVED			0
-+#define DOT11_RC_UNSPECIFIED			1	/* Unspecified reason */
-+#define DOT11_RC_AUTH_INVAL			2	/* Previous authentication no longer valid */
-+#define DOT11_RC_DEAUTH_LEAVING			3	/* Deauthenticated because sending station is
-+							   leaving (or has left) IBSS or ESS */
-+#define DOT11_RC_INACTIVITY			4	/* Disassociated due to inactivity */
-+#define DOT11_RC_BUSY				5	/* Disassociated because AP is unable to handle
-+							   all currently associated stations */
-+#define DOT11_RC_INVAL_CLASS_2			6	/* Class 2 frame received from
-+							   nonauthenticated station */
-+#define DOT11_RC_INVAL_CLASS_3			7	/* Class 3 frame received from
-+							   nonassociated station */
-+#define DOT11_RC_DISASSOC_LEAVING		8	/* Disassociated because sending station is
-+							   leaving (or has left) BSS */
-+#define DOT11_RC_NOT_AUTH			9	/* Station requesting (re)association is
-+							   not authenticated with responding station */
-+#define DOT11_RC_MAX				23	/* Reason codes > 23 are reserved */
++typedef volatile struct {
++	uint32	chipid;			/* 0x0 */
++	uint32	capabilities;
++	uint32	corecontrol;		/* corerev >= 1 */
++	uint32	PAD[5];
 +
-+/* Status Codes */
-+#define DOT11_STATUS_SUCCESS			0	/* Successful */
-+#define DOT11_STATUS_FAILURE			1	/* Unspecified failure */
-+#define DOT11_STATUS_CAP_MISMATCH		10	/* Cannot support all requested capabilities
-+							   in the Capability Information field */
-+#define DOT11_STATUS_REASSOC_FAIL		11	/* Reassociation denied due to inability to
-+							   confirm that association exists */
-+#define DOT11_STATUS_ASSOC_FAIL			12	/* Association denied due to reason outside
-+							   the scope of this standard */
-+#define DOT11_STATUS_AUTH_MISMATCH		13	/* Responding station does not support the
-+							   specified authentication algorithm */
-+#define DOT11_STATUS_AUTH_SEQ			14	/* Received an Authentication frame with
-+							   authentication transaction sequence number
-+							   out of expected sequence */
-+#define DOT11_STATUS_AUTH_CHALLENGE_FAIL	15	/* Authentication rejected because of challenge failure */
-+#define DOT11_STATUS_AUTH_TIMEOUT		16	/* Authentication rejected due to timeout waiting
-+							   for next frame in sequence */
-+#define DOT11_STATUS_ASSOC_BUSY_FAIL		17	/* Association denied because AP is unable to
-+							   handle additional associated stations */
-+#define DOT11_STATUS_ASSOC_RATE_MISMATCH	18	/* Association denied due to requesting station
-+							   not supporting all of the data rates in the
-+							   BSSBasicRateSet parameter */
-+#define DOT11_STATUS_ASSOC_SHORT_REQUIRED	19	/* Association denied due to requesting station
-+							   not supporting the Short Preamble option */
-+#define DOT11_STATUS_ASSOC_PBCC_REQUIRED	20	/* Association denied due to requesting station
-+							   not supporting the PBCC Modulation option */
-+#define DOT11_STATUS_ASSOC_AGILITY_REQUIRED	21	/* Association denied due to requesting station
-+							   not supporting the Channel Agility option */
-+#define DOT11_STATUS_ASSOC_SPECTRUM_REQUIRED	22	/* Association denied because Spectrum Management 
-+							   capability is required. */
-+#define DOT11_STATUS_ASSOC_BAD_POWER_CAP	23	/* Association denied because the info in the 
-+							   Power Cap element is unacceptable. */
-+#define DOT11_STATUS_ASSOC_BAD_SUP_CHANNELS	24	/* Association denied because the info in the 
-+							   Supported Channel element is unacceptable */
-+#define DOT11_STATUS_ASSOC_SHORTSLOT_REQUIRED	25	/* Association denied due to requesting station
-+							   not supporting the Short Slot Time option */
-+#define DOT11_STATUS_ASSOC_ERPBCC_REQUIRED	26	/* Association denied due to requesting station
-+							   not supporting the ER-PBCC Modulation option */
-+#define DOT11_STATUS_ASSOC_DSSOFDM_REQUIRED	27	/* Association denied due to requesting station
-+							   not supporting the DSS-OFDM option */
++	/* Interrupt control */
++	uint32	intstatus;		/* 0x20 */
++	uint32	intmask;
++	uint32	PAD[6];
 +
-+/* Info Elts, length of INFORMATION portion of Info Elts */
-+#define DOT11_MNG_DS_PARAM_LEN			1
-+#define DOT11_MNG_IBSS_PARAM_LEN		2
++	/* serial flash interface registers */
++	uint32	flashcontrol;		/* 0x40 */
++	uint32	flashaddress;
++	uint32	flashdata;
++	uint32	PAD[1];
 +
-+/* TIM Info element has 3 bytes fixed info in INFORMATION field,
-+ * followed by 1 to 251 bytes of Partial Virtual Bitmap */
-+#define DOT11_MNG_TIM_FIXED_LEN			3
-+#define DOT11_MNG_TIM_DTIM_COUNT		0
-+#define DOT11_MNG_TIM_DTIM_PERIOD		1
-+#define DOT11_MNG_TIM_BITMAP_CTL		2
-+#define DOT11_MNG_TIM_PVB			3
++	/* Silicon backplane configuration broadcast control */
++	uint32	broadcastaddress;
++	uint32	broadcastdata;
++	uint32	PAD[2];
 +
-+/* TLV defines */
-+#define TLV_TAG_OFF		0
-+#define TLV_LEN_OFF		1
-+#define TLV_HDR_LEN		2
-+#define TLV_BODY_OFF		2
++	/* gpio - cleared only by power-on-reset */
++	uint32	gpioin;			/* 0x60 */
++	uint32	gpioout;
++	uint32	gpioouten;
++	uint32	gpiocontrol;
++	uint32	gpiointpolarity;
++	uint32	gpiointmask;
++	uint32	PAD[2];
 +
-+/* Management Frame Information Element IDs */
-+#define DOT11_MNG_SSID_ID			0
-+#define DOT11_MNG_RATES_ID			1
-+#define DOT11_MNG_FH_PARMS_ID			2
-+#define DOT11_MNG_DS_PARMS_ID			3
-+#define DOT11_MNG_CF_PARMS_ID			4
-+#define DOT11_MNG_TIM_ID			5
-+#define DOT11_MNG_IBSS_PARMS_ID			6
-+#define DOT11_MNG_COUNTRY_ID			7
-+#define DOT11_MNG_HOPPING_PARMS_ID		8
-+#define DOT11_MNG_HOPPING_TABLE_ID		9
-+#define DOT11_MNG_REQUEST_ID			10
-+#define DOT11_MNG_CHALLENGE_ID			16
-+#define DOT11_MNG_PWR_CONSTRAINT_ID		32    /* 11H PowerConstraint	*/
-+#define DOT11_MNG_PWR_CAP_ID			33    /* 11H PowerCapability	*/
-+#define DOT11_MNG_TPC_REQUEST_ID 		34    /* 11H TPC Request	*/
-+#define DOT11_MNG_TPC_REPORT_ID			35    /* 11H TPC Report		*/
-+#define DOT11_MNG_SUPP_CHANNELS_ID		36    /* 11H Supported Channels	*/
-+#define DOT11_MNG_CHANNEL_SWITCH_ID		37    /* 11H ChannelSwitch Announcement*/
-+#define DOT11_MNG_MEASURE_REQUEST_ID		38    /* 11H MeasurementRequest	*/
-+#define DOT11_MNG_MEASURE_REPORT_ID		39    /* 11H MeasurementReport	*/
-+#define DOT11_MNG_QUIET_ID			40    /* 11H Quiet		*/
-+#define DOT11_MNG_IBSS_DFS_ID			41    /* 11H IBSS_DFS 		*/
-+#define DOT11_MNG_ERP_ID			42
-+#define DOT11_MNG_NONERP_ID			47
-+#define DOT11_MNG_EXT_RATES_ID			50
-+#define DOT11_MNG_WPA_ID			221
-+#define DOT11_MNG_PROPR_ID			221
++	/* Watchdog timer */
++	uint32	watchdog;		/* 0x80 */
++	uint32	PAD[3];
 +
-+/* ERP info element bit values */
-+#define DOT11_MNG_ERP_LEN			1	/* ERP is currently 1 byte long */
-+#define DOT11_MNG_NONERP_PRESENT		0x01	/* NonERP (802.11b) STAs are present in the BSS */
-+#define DOT11_MNG_USE_PROTECTION		0x02	/* Use protection mechanisms for ERP-OFDM frames */
-+#define DOT11_MNG_BARKER_PREAMBLE		0x04	/* Short Preambles: 0 == allowed, 1 == not allowed */
++	/* clock control */
++	uint32	clockcontrol_n;		/* 0x90 */
++	uint32	clockcontrol_sb;	/* aka m0 */
++	uint32	clockcontrol_pci;	/* aka m1 */
++	uint32	clockcontrol_m2;	/* mii/uart/mipsref */
++	uint32	clockcontrol_mips;	/* aka m3 */
++	uint32	uart_clkdiv;		/* corerev >= 3 */
++	uint32	PAD[2];
 +
-+/* Capability Information Field */
-+#define DOT11_CAP_ESS				0x0001
-+#define DOT11_CAP_IBSS				0x0002
-+#define DOT11_CAP_POLLABLE			0x0004
-+#define DOT11_CAP_POLL_RQ			0x0008
-+#define DOT11_CAP_PRIVACY			0x0010
-+#define DOT11_CAP_SHORT				0x0020
-+#define DOT11_CAP_PBCC				0x0040
-+#define DOT11_CAP_AGILITY			0x0080
-+#define DOT11_CAP_SPECTRUM			0x0100
-+#define DOT11_CAP_SHORTSLOT			0x0400
-+#define DOT11_CAP_CCK_OFDM			0x2000
-+
-+/* Action Frame Constants */
-+#define DOT11_ACTION_CAT_ERR_MASK	0x10
-+#define DOT11_ACTION_CAT_SPECT_MNG	0x00
-+
-+#define DOT11_ACTION_ID_M_REQ		0
-+#define DOT11_ACTION_ID_M_REP		1
-+#define DOT11_ACTION_ID_TPC_REQ		2
-+#define DOT11_ACTION_ID_TPC_REP		3
-+#define DOT11_ACTION_ID_CHANNEL_SWITCH	4
-+
-+/* MLME Enumerations */
-+#define DOT11_BSSTYPE_INFRASTRUCTURE		0
-+#define DOT11_BSSTYPE_INDEPENDENT		1
-+#define DOT11_BSSTYPE_ANY			2
-+#define DOT11_SCANTYPE_ACTIVE			0
-+#define DOT11_SCANTYPE_PASSIVE			1
-+
-+/* 802.11 A PHY constants */
-+#define APHY_SLOT_TIME		9
-+#define APHY_SIFS_TIME		16
-+#define APHY_DIFS_TIME		(APHY_SIFS_TIME + (2 * APHY_SLOT_TIME))
-+#define APHY_PREAMBLE_TIME	16
-+#define APHY_SIGNAL_TIME	4
-+#define APHY_SYMBOL_TIME	4
-+#define APHY_SERVICE_NBITS	16
-+#define APHY_TAIL_NBITS		6
-+#define	APHY_CWMIN		15
-+
-+/* 802.11 B PHY constants */
-+#define BPHY_SLOT_TIME		20
-+#define BPHY_SIFS_TIME		10
-+#define BPHY_DIFS_TIME		50
-+#define BPHY_PLCP_TIME		192
-+#define BPHY_PLCP_SHORT_TIME	96
-+#define	BPHY_CWMIN		31
-+
-+/* 802.11 G constants */
-+#define DOT11_OFDM_SIGNAL_EXTENSION	6
-+
-+#define PHY_CWMAX		1023
-+
-+#define	DOT11_MAXNUMFRAGS	16	/* max # fragments per MSDU */
-+
-+/* dot11Counters Table - 802.11 spec., Annex D */
-+typedef struct d11cnt {
-+	uint32		txfrag;		/* dot11TransmittedFragmentCount */
-+	uint32		txmulti;	/* dot11MulticastTransmittedFrameCount */
-+	uint32		txfail;		/* dot11FailedCount */
-+	uint32		txretry;	/* dot11RetryCount */
-+	uint32		txretrie;	/* dot11MultipleRetryCount */
-+	uint32		rxdup;		/* dot11FrameduplicateCount */
-+	uint32		txrts;		/* dot11RTSSuccessCount */
-+	uint32		txnocts;	/* dot11RTSFailureCount */
-+	uint32		txnoack;	/* dot11ACKFailureCount */
-+	uint32		rxfrag;		/* dot11ReceivedFragmentCount */
-+	uint32		rxmulti;	/* dot11MulticastReceivedFrameCount */
-+	uint32		rxcrc;		/* dot11FCSErrorCount */
-+	uint32		txfrmsnt;	/* dot11TransmittedFrameCount */
-+	uint32		rxundec;	/* dot11WEPUndecryptableCount */
-+} d11cnt_t;
-+
-+/* BRCM OUI */
-+#define BRCM_OUI		"\x00\x10\x18"
-+
-+/* WPA definitions */
-+#define WPA_VERSION		1
-+#define WPA_OUI			"\x00\x50\xF2"
-+
-+#define WPA_OUI_LEN	3
-+
-+/* WPA authentication modes */
-+#define WPA_AUTH_NONE		0	/* None */
-+#define WPA_AUTH_UNSPECIFIED	1	/* Unspecified authentication over 802.1X: default for WPA */
-+#define WPA_AUTH_PSK		2	/* Pre-shared Key over 802.1X */
-+#define WPA_AUTH_DISABLED	255	/* Legacy (i.e., non-WPA) */
-+				 
-+#define IS_WPA_AUTH(auth)	((auth) == WPA_AUTH_NONE || \
-+				 (auth) == WPA_AUTH_UNSPECIFIED || \
-+				 (auth) == WPA_AUTH_PSK)
-+
-+
-+/* Key related defines */
-+#define DOT11_MAX_KEY_SIZE	32	/* max size of any key */
-+#define DOT11_MAX_IV_SIZE	16	/* max size of any IV */
-+#define DOT11_EXT_IV_FLAG	(1<<5)	/* flag to indicate IV is > 4 bytes */
-+
-+#define WEP1_KEY_SIZE		5	/* max size of any WEP key */
-+#define WEP1_KEY_HEX_SIZE	10	/* size of WEP key in hex. */
-+#define WEP128_KEY_SIZE		13	/* max size of any WEP key */
-+#define WEP128_KEY_HEX_SIZE	26	/* size of WEP key in hex. */
-+#define TKIP_MIC_SIZE		8	/* size of TKIP MIC */
-+#define TKIP_EOM_SIZE		7	/* max size of TKIP EOM */
-+#define TKIP_EOM_FLAG		0x5a	/* TKIP EOM flag byte */
-+#define TKIP_KEY_SIZE		32	/* size of any TKIP key */
-+#define TKIP_MIC_AUTH_TX	16	/* offset to Authenticator MIC TX key */
-+#define TKIP_MIC_AUTH_RX	24	/* offset to Authenticator MIC RX key */
-+#define TKIP_MIC_SUP_RX		16	/* offset to Supplicant MIC RX key */
-+#define TKIP_MIC_SUP_TX		24	/* offset to Supplicant MIC TX key */
-+#define AES_KEY_SIZE		16	/* size of AES key */
-+
-+#undef PACKED
-+#if !defined(__GNUC__)
-+#pragma pack()
-+#endif
-+
-+#endif /* _802_11_H_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/proto/ethernet.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/proto/ethernet.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/proto/ethernet.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/proto/ethernet.h	2005-08-28 11:12:20.450856112 +0200
-@@ -0,0 +1,145 @@
-+/*******************************************************************************
-+ * $Id$
-+ * Copyright 2001-2003, Broadcom Corporation   
-+ * All Rights Reserved.   
-+ *    
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
-+ * From FreeBSD 2.2.7: Fundamental constants relating to ethernet.
-+ ******************************************************************************/
-+
-+#ifndef _NET_ETHERNET_H_	    /* use native BSD ethernet.h when available */
-+#define _NET_ETHERNET_H_
-+
-+#ifndef _TYPEDEFS_H_
-+#include "typedefs.h"
-+#endif
-+
-+#if defined(__GNUC__)
-+#define	PACKED	__attribute__((packed))
-+#else
-+#define	PACKED
-+#endif
-+
-+/*
-+ * The number of bytes in an ethernet (MAC) address.
-+ */
-+#define	ETHER_ADDR_LEN		6
-+
-+/*
-+ * The number of bytes in the type field.
-+ */
-+#define	ETHER_TYPE_LEN		2
-+
-+/*
-+ * The number of bytes in the trailing CRC field.
-+ */
-+#define	ETHER_CRC_LEN		4
-+
-+/*
-+ * The length of the combined header.
-+ */
-+#define	ETHER_HDR_LEN		(ETHER_ADDR_LEN*2+ETHER_TYPE_LEN)
-+
-+/*
-+ * The minimum packet length.
-+ */
-+#define	ETHER_MIN_LEN		64
-+
-+/*
-+ * The minimum packet user data length.
-+ */
-+#define	ETHER_MIN_DATA		46
-+
-+/*
-+ * The maximum packet length.
-+ */
-+#define	ETHER_MAX_LEN		1518
-+
-+/*
-+ * The maximum packet user data length.
-+ */
-+#define	ETHER_MAX_DATA		1500
-+
-+/*
-+ * Used to uniquely identify a 802.1q VLAN-tagged header.
-+ */
-+#define	VLAN_TAG			0x8100
-+
-+/*
-+ * Located after dest & src address in ether header.
-+ */
-+#define VLAN_FIELDS_OFFSET		(ETHER_ADDR_LEN * 2)
-+
-+/*
-+ * 4 bytes of vlan field info.
-+ */
-+#define VLAN_FIELDS_SIZE		4
-+
-+/* location of pri bits in 16-bit vlan fields */
-+#define VLAN_PRI_SHIFT			13
-+
-+/* 3 bits of priority */
-+#define VLAN_PRI_MASK			7
-+
-+/* 802.1X ethertype */
-+#define ETHER_TYPE_802_1X	0x888e
-+
-+/*
-+ * A macro to validate a length with
-+ */
-+#define	ETHER_IS_VALID_LEN(foo)	\
-+	((foo) >= ETHER_MIN_LEN && (foo) <= ETHER_MAX_LEN)
-+
-+
-+#ifndef __INCif_etherh     /* Quick and ugly hack for VxWorks */
-+/*
-+ * Structure of a 10Mb/s Ethernet header.
-+ */
-+struct	ether_header {
-+	uint8	ether_dhost[ETHER_ADDR_LEN];
-+	uint8	ether_shost[ETHER_ADDR_LEN];
-+	uint16	ether_type;
-+} PACKED ;
-+
-+/*
-+ * Structure of a 48-bit Ethernet address.
-+ */
-+struct	ether_addr {
-+	uint8 octet[ETHER_ADDR_LEN];
-+} PACKED ;
-+#endif
-+
-+/*
-+ * Takes a pointer, returns true if a 48-bit multicast address
-+ * (including broadcast, since it is all ones)
-+ */
-+#define ETHER_ISMULTI(ea) (((uint8 *)(ea))[0] & 1)
-+
-+/*
-+ * Takes a pointer, returns true if a 48-bit broadcast (all ones)
-+ */
-+#define ETHER_ISBCAST(ea) ((((uint8 *)(ea))[0] &		\
-+			    ((uint8 *)(ea))[1] &		\
-+			    ((uint8 *)(ea))[2] &		\
-+			    ((uint8 *)(ea))[3] &		\
-+			    ((uint8 *)(ea))[4] &		\
-+			    ((uint8 *)(ea))[5]) == 0xff)
-+
-+static const struct ether_addr ether_bcast = {{255, 255, 255, 255, 255, 255}};
-+
-+/*
-+ * Takes a pointer, returns true if a 48-bit null address (all zeros)
-+ */
-+#define ETHER_ISNULLADDR(ea) ((((uint8 *)(ea))[0] |		\
-+			    ((uint8 *)(ea))[1] |		\
-+			    ((uint8 *)(ea))[2] |		\
-+			    ((uint8 *)(ea))[3] |		\
-+			    ((uint8 *)(ea))[4] |		\
-+			    ((uint8 *)(ea))[5]) == 0)
-+
-+#undef PACKED
-+
-+#endif /* _NET_ETHERNET_H_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/rts/crc.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/rts/crc.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/rts/crc.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/rts/crc.h	2005-08-28 11:12:20.451855960 +0200
-@@ -0,0 +1,69 @@
-+/*******************************************************************************
-+ * $Id$
-+ * Copyright 2001-2003, Broadcom Corporation   
-+ * All Rights Reserved.   
-+ *    
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
-+ * crc.h - a function to compute crc for iLine10 headers
-+ ******************************************************************************/
-+
-+#ifndef _RTS_CRC_H_
-+#define _RTS_CRC_H_ 1
-+
-+#include "typedefs.h"
-+
-+#ifdef __cplusplus
-+extern "C" {
-+#endif
-+
-+
-+#define CRC8_INIT_VALUE  0xff       /* Initial CRC8 checksum value */
-+#define CRC8_GOOD_VALUE  0x9f       /* Good final CRC8 checksum value */
-+#define HCS_GOOD_VALUE   0x39       /* Good final header checksum value */
-+
-+#define CRC16_INIT_VALUE 0xffff     /* Initial CRC16 checksum value */
-+#define CRC16_GOOD_VALUE 0xf0b8     /* Good final CRC16 checksum value */
-+
-+#define CRC32_INIT_VALUE 0xffffffff /* Initial CRC32 checksum value */
-+#define CRC32_GOOD_VALUE 0xdebb20e3 /* Good final CRC32 checksum value */
-+
-+void   hcs(uint8 *, uint);
-+uint8  crc8(uint8 *, uint, uint8);
-+uint16 crc16(uint8 *, uint, uint16);
-+uint32 crc32(uint8 *, uint, uint32);
-+
-+/* macros for common usage */
-+
-+#define APPEND_CRC8(pbytes, nbytes)                           \
-+do {                                                          \
-+    uint8 tmp = crc8(pbytes, nbytes, CRC8_INIT_VALUE) ^ 0xff; \
-+    (pbytes)[(nbytes)] = tmp;                                 \
-+    (nbytes) += 1;                                            \
-+} while (0)
-+
-+#define APPEND_CRC16(pbytes, nbytes)                               \
-+do {                                                               \
-+    uint16 tmp = crc16(pbytes, nbytes, CRC16_INIT_VALUE) ^ 0xffff; \
-+    (pbytes)[(nbytes) + 0] = (tmp >> 0) & 0xff;                    \
-+    (pbytes)[(nbytes) + 1] = (tmp >> 8) & 0xff;                    \
-+    (nbytes) += 2;                                                 \
-+} while (0)
-+
-+#define APPEND_CRC32(pbytes, nbytes)                                   \
-+do {                                                                   \
-+    uint32 tmp = crc32(pbytes, nbytes, CRC32_INIT_VALUE) ^ 0xffffffff; \
-+    (pbytes)[(nbytes) + 0] = (tmp >>  0) & 0xff;                       \
-+    (pbytes)[(nbytes) + 1] = (tmp >>  8) & 0xff;                       \
-+    (pbytes)[(nbytes) + 2] = (tmp >> 16) & 0xff;                       \
-+    (pbytes)[(nbytes) + 3] = (tmp >> 24) & 0xff;                       \
-+    (nbytes) += 4;                                                     \
-+} while (0)
-+
-+#ifdef __cplusplus
-+}
-+#endif
-+
-+#endif /* _RTS_CRC_H_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/s5.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/s5.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/s5.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/s5.h	2005-08-28 11:12:20.451855960 +0200
-@@ -0,0 +1,103 @@
-+#ifndef _S5_H_
-+#define _S5_H_
-+/*
-+ *   Copyright 2003, Broadcom Corporation
-+ *   All Rights Reserved.
-+ * 
-+ *   Broadcom Sentry5 (S5) BCM5365, 53xx, BCM58xx SOC Internal Core
-+ *   and MIPS3301 (R4K) System Address Space
-+ *
-+ *   This program is free software; you can redistribute it and/or
-+ *   modify it under the terms of the GNU General Public License as
-+ *   published by the Free Software Foundation, located in the file
-+ *   LICENSE.
-+ *
-+ *   $Id: s5.h,v 1.3 2003/06/10 18:54:51 jfd Exp $
-+ * 
-+ */
-+
-+/* BCM5365 Address map */
-+#define KSEG1ADDR(x)    ( (x) | 0xa0000000)
-+#define BCM5365_SDRAM		0x00000000 /* 0-128MB Physical SDRAM */
-+#define BCM5365_PCI_MEM		0x08000000 /* Host Mode PCI mem space (64MB) */
-+#define BCM5365_PCI_CFG		0x0c000000 /* Host Mode PCI cfg space (64MB) */
-+#define BCM5365_PCI_DMA		0x40000000 /* Client Mode PCI mem space (1GB)*/
-+#define	BCM5365_SDRAM_SWAPPED	0x10000000 /* Byteswapped Physical SDRAM */
-+#define BCM5365_ENUM		0x18000000 /* Beginning of core enum space */
-+
-+/* BCM5365 Core register space */
-+#define BCM5365_REG_CHIPC	0x18000000 /* Chipcommon  registers */
-+#define BCM5365_REG_EMAC0	0x18001000 /* Ethernet MAC0 core registers */
-+#define BCM5365_REG_IPSEC	0x18002000 /* BCM582x CryptoCore registers */
-+#define BCM5365_REG_USB		0x18003000 /* USB core registers */
-+#define BCM5365_REG_PCI		0x18004000 /* PCI core registers */
-+#define BCM5365_REG_MIPS33	0x18005000 /* MIPS core registers */
-+#define BCM5365_REG_MEMC	0x18006000 /* MEMC core registers */
-+#define BCM5365_REG_UARTS       (BCM5365_REG_CHIPC + 0x300) /* UART regs */
-+#define	BCM5365_EJTAG		0xff200000 /* MIPS EJTAG space (2M) */
-+
-+/* COM Ports 1/2 */
-+#define	BCM5365_UART		(BCM5365_REG_UARTS)
-+#define BCM5365_UART_COM2	(BCM5365_REG_UARTS + 0x00000100)
-+
-+/* Registers common to MIPS33 Core used in 5365 */
-+#define MIPS33_FLASH_REGION           0x1fc00000 /* Boot FLASH Region  */
-+#define MIPS33_EXTIF_REGION           0x1a000000 /* Chipcommon EXTIF region*/
-+#define BCM5365_EXTIF                 0x1b000000 /* MISC_CS */
-+#define MIPS33_FLASH_REGION_AUX       0x1c000000 /* FLASH Region 2*/
-+
-+/* Internal Core Sonics Backplane Devices */
-+#define INTERNAL_UART_COM1            BCM5365_UART
-+#define INTERNAL_UART_COM2            BCM5365_UART_COM2
-+#define SB_REG_CHIPC                  BCM5365_REG_CHIPC
-+#define SB_REG_ENET0                  BCM5365_REG_EMAC0
-+#define SB_REG_IPSEC                  BCM5365_REG_IPSEC
-+#define SB_REG_USB                    BCM5365_REG_USB
-+#define SB_REG_PCI                    BCM5365_REG_PCI
-+#define SB_REG_MIPS                   BCM5365_REG_MIPS33
-+#define SB_REG_MEMC                   BCM5365_REG_MEMC
-+#define SB_REG_MEMC_OFF               0x6000
-+#define SB_EXTIF_SPACE                MIPS33_EXTIF_REGION
-+#define SB_FLASH_SPACE                MIPS33_FLASH_REGION
-+
-+/*
-+ * XXX
-+ * 5365-specific backplane interrupt flag numbers.  This should be done
-+ * dynamically instead.
-+ */
-+#define	SBFLAG_PCI	0
-+#define	SBFLAG_ENET0	1
-+#define	SBFLAG_ILINE20	2
-+#define	SBFLAG_CODEC	3
-+#define	SBFLAG_USB	4
-+#define	SBFLAG_EXTIF	5
-+#define	SBFLAG_ENET1	6
-+
-+/* BCM95365 Local Bus devices */
-+#define BCM95365K_RESET_ADDR    	 BCM5365_EXTIF
-+#define BCM95365K_BOARDID_ADDR  	(BCM5365_EXTIF | 0x4000)
-+#define BCM95365K_DOC_ADDR      	(BCM5365_EXTIF | 0x6000)
-+#define BCM95365K_LED_ADDR      	(BCM5365_EXTIF | 0xc000)
-+#define BCM95365K_TOD_REG_BASE          (BCM95365K_NVRAM_ADDR | 0x1ff0)
-+#define BCM95365K_NVRAM_ADDR    	(BCM5365_EXTIF | 0xe000)
-+#define BCM95365K_NVRAM_SIZE             0x1ff0 /* 8K NVRAM : DS1743/STM48txx*/
-+
-+/* Write to DLR2416 VFD Display character RAM */
-+#define LED_REG(x)      \
-+ (*(volatile unsigned char *) (KSEG1ADDR(BCM95365K_LED_ADDR) + (x)))
-+
-+#ifdef	CONFIG_VSIM
-+#define	BCM5365_TRACE(trval)        do { *((int *)0xa0002ff8) = (trval); \
-+                                       } while (0)
-+#else
-+#define	BCM5365_TRACE(trval)        do { *((unsigned char *)\
-+                                         KSEG1ADDR(BCM5365K_LED_ADDR)) = (trval); \
-+				    *((int *)0xa0002ff8) = (trval); } while (0)
-+#endif
-+
-+/* BCM9536R Local Bus devices */
-+#define BCM95365R_DOC_ADDR      	BCM5365_EXTIF
-+
-+
-+
-+#endif /*!_S5_H_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbchipc.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbchipc.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbchipc.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbchipc.h	2005-08-28 11:12:20.468853376 +0200
-@@ -0,0 +1,281 @@
-+/*
-+ * SiliconBackplane Chipcommon core hardware definitions.
-+ *
-+ * The chipcommon core provides chip identification, SB control,
-+ * jtag, 0/1/2 uarts, clock frequency control, a watchdog interrupt timer,
-+ * gpio interface, extbus, and support for serial and parallel flashes.
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#ifndef	_SBCHIPC_H
-+#define	_SBCHIPC_H
-+
-+
-+/* cpp contortions to concatenate w/arg prescan */
-+#ifndef PAD
-+#define	_PADLINE(line)	pad ## line
-+#define	_XSTR(line)	_PADLINE(line)
-+#define	PAD		_XSTR(__LINE__)
-+#endif	/* PAD */
-+
-+typedef volatile struct {
-+	uint32	chipid;			/* 0x0 */
-+	uint32	capabilities;
-+	uint32	corecontrol;		/* corerev >= 1 */
-+	uint32	PAD[5];
-+
-+	/* Interrupt control */
-+	uint32	intstatus;		/* 0x20 */
-+	uint32	intmask;
-+	uint32	PAD[6];
-+
-+	/* serial flash interface registers */
-+	uint32	flashcontrol;		/* 0x40 */
-+	uint32	flashaddress;
-+	uint32	flashdata;
-+	uint32	PAD[1];
-+
-+	/* Silicon backplane configuration broadcast control */
-+	uint32	broadcastaddress;
-+	uint32	broadcastdata;
-+	uint32	PAD[2];
-+
-+	/* gpio - cleared only by power-on-reset */
-+	uint32	gpioin;			/* 0x60 */
-+	uint32	gpioout;
-+	uint32	gpioouten;
-+	uint32	gpiocontrol;
-+	uint32	gpiointpolarity;
-+	uint32	gpiointmask;
-+	uint32	PAD[2];
-+
-+	/* Watchdog timer */
-+	uint32	watchdog;		/* 0x80 */
-+	uint32	PAD[3];
-+
-+	/* clock control */
-+	uint32	clockcontrol_n;		/* 0x90 */
-+	uint32	clockcontrol_sb;	/* aka m0 */
-+	uint32	clockcontrol_pci;	/* aka m1 */
-+	uint32	clockcontrol_m2;	/* mii/uart/mipsref */
-+	uint32	clockcontrol_mips;	/* aka m3 */
-+	uint32	uart_clkdiv;		/* corerev >= 3 */
-+	uint32	PAD[2];
-+
-+	/* pll delay registers (corerev >= 4) */
-+	uint32	pll_on_delay;		/* 0xb0 */
-+	uint32	fref_sel_delay;
-+	uint32	slow_clk_ctl;
-+	uint32	PAD[17];
-+
-+	/* ExtBus control registers (corerev >= 3) */
-+	uint32	cs01config;		/* 0x100 */
-+	uint32	cs01memwaitcnt;
-+	uint32	cs01attrwaitcnt;
-+	uint32	cs01iowaitcnt;
-+	uint32	cs23config;
-+	uint32	cs23memwaitcnt;
-+	uint32	cs23attrwaitcnt;
-+	uint32	cs23iowaitcnt;
-+	uint32	cs4config;
-+	uint32	cs4waitcnt;
-+	uint32	parallelflashconfig;
-+	uint32	parallelflashwaitcnt;
-+	uint32	PAD[116];
-+
-+	/* uarts */
-+	uint8	uart0data;		/* 0x300 */
-+	uint8	uart0imr;
-+	uint8	uart0fcr;
-+	uint8	uart0lcr;
-+	uint8	uart0mcr;
-+	uint8	uart0lsr;
-+	uint8	uart0msr;
-+	uint8	uart0scratch;
-+	uint8	PAD[248];		/* corerev >= 1 */
-+
-+	uint8	uart1data;		/* 0x400 */
-+	uint8	uart1imr;
-+	uint8	uart1fcr;
-+	uint8	uart1lcr;
-+	uint8	uart1mcr;
-+	uint8	uart1lsr;
-+	uint8	uart1msr;
-+	uint8	uart1scratch;
-+} chipcregs_t;
-+
-+/* chipid */
-+#define	CID_ID_MASK		0x0000ffff		/* Chip Id mask */
-+#define	CID_REV_MASK		0x000f0000		/* Chip Revision mask */
-+#define	CID_REV_SHIFT		16			/* Chip Revision shift */
-+#define	CID_PKG_MASK		0x00f00000		/* Package Option mask */
-+#define	CID_PKG_SHIFT		20			/* Package Option shift */
-+#define	CID_CC_MASK		0x0f000000		/* CoreCount (corerev >= 4) */
-+#define CID_CC_SHIFT		24
-+
-+/* capabilities */
-+#define	CAP_UARTS_MASK		0x00000003		/* Number of uarts */
-+#define CAP_MIPSEB		0x00000004		/* MIPS is in big-endian mode */
-+#define CAP_UCLKSEL		0x00000018		/* UARTs clock select */
-+#define CAP_UINTCLK		0x00000008		/* UARTs are driven by internal divided clock */
-+#define CAP_UARTGPIO		0x00000020		/* UARTs own Gpio's 15:12 */
-+#define CAP_EXTBUS		0x00000040		/* External bus present */
-+#define	CAP_FLASH_MASK		0x00000700		/* Type of flash */
-+#define	CAP_PLL_MASK		0x00038000		/* Type of PLL */
-+#define CAP_PWR_CTL		0x00040000		/* Power control */
-+
-+/* PLL type */
-+#define PLL_NONE		0x00000000
-+#define PLL_TYPE1		0x00010000		/* 48Mhz base, 3 dividers */
-+#define PLL_TYPE2		0x00020000		/* 48Mhz, 4 dividers */
-+#define PLL_TYPE3		0x00030000		/* 25Mhz, 2 dividers */
-+#define PLL_TYPE4		0x00008000		/* 48Mhz, 4 dividers */
-+
-+/* corecontrol */
-+#define CC_UARTCLKO		0x00000001		/* Drive UART with internal clock */
-+#define	CC_SE			0x00000002		/* sync clk out enable (corerev >= 3) */
-+
-+/* intstatus/intmask */
-+#define	CI_EI			0x00000002		/* ro: ext intr pin (corerev >= 3) */
-+
-+/* slow_clk_ctl */
-+#define SCC_SS_MASK		0x00000007		/* slow clock source mask */
-+#define	SCC_SS_LPO		0x00000000		/* source of slow clock is LPO */
-+#define	SCC_SS_XTAL		0x00000001		/* source of slow clock is crystal */
-+#define	SCC_SS_PCI		0x00000002		/* source of slow clock is PCI */
-+#define SCC_LF			0x00000200		/* LPOFreqSel, 1: 160Khz, 0: 32KHz */
-+#define SCC_LP			0x00000400		/* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
-+#define SCC_FS			0x00000800		/* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
-+#define SCC_IP			0x00001000		/* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
-+#define SCC_XC			0x00002000		/* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
-+#define SCC_XP			0x00004000		/* XtalPU (RO), 1/0: crystal running/disabled */
-+#define SCC_CD_MASK		0xffff0000		/* ClockDivider mask, SlowClk = 1/(4+divisor) * crystal/PCI clock */
-+#define SCC_CD_SHF		16			/* CLockDivider shift */
-+
-+/* clockcontrol_n */
-+#define	CN_N1_MASK		0x3f			/* n1 control */
-+#define	CN_N2_MASK		0x3f00			/* n2 control */
-+#define	CN_N2_SHIFT		8
-+
-+/* clockcontrol_sb/pci/uart */
-+#define	CC_M1_MASK		0x3f			/* m1 control */
-+#define	CC_M2_MASK		0x3f00			/* m2 control */
-+#define	CC_M2_SHIFT		8
-+#define	CC_M3_MASK		0x3f0000		/* m3 control */
-+#define	CC_M3_SHIFT		16
-+#define	CC_MC_MASK		0x1f000000		/* mux control */
-+#define	CC_MC_SHIFT		24
-+
-+/* N3M Clock control values for 125Mhz */
-+#define	CC_125_N		0x0802			/* Default values for bcm4310 */
-+#define	CC_125_M		0x04020009
-+#define	CC_125_M25		0x11090009
-+#define	CC_125_M33		0x11090005
-+
-+/* N3M Clock control magic field values */
-+#define	CC_F6_2			0x02			/* A factor of 2 in */
-+#define	CC_F6_3			0x03			/* 6-bit fields like */
-+#define	CC_F6_4			0x05			/* N1, M1 or M3 */
-+#define	CC_F6_5			0x09
-+#define	CC_F6_6			0x11
-+#define	CC_F6_7			0x21
-+
-+#define	CC_F5_BIAS		5			/* 5-bit fields get this added */
-+
-+#define	CC_MC_BYPASS		0x08
-+#define	CC_MC_M1		0x04
-+#define	CC_MC_M1M2		0x02
-+#define	CC_MC_M1M2M3		0x01
-+#define	CC_MC_M1M3		0x11
-+
-+/* Type 2 Clock control magic field values */
-+#define	CC_T2_BIAS		2			/* n1, n2, m1 & m3 bias */
-+#define	CC_T2M2_BIAS		3			/* m2 bias */
-+
-+#define	CC_T2MC_M1BYP		1
-+#define	CC_T2MC_M2BYP		2
-+#define	CC_T2MC_M3BYP		4
-+
-+/* Common clock base */
-+#define	CC_CLOCK_BASE		24000000		/* Half the clock freq */
-+
-+/* Flash types in the chipcommon capabilities register */
-+#define FLASH_NONE		0x000		/* No flash */
-+#define SFLASH_ST		0x100		/* ST serial flash */
-+#define SFLASH_AT		0x200		/* Atmel serial flash */
-+#define	PFLASH			0x700		/* Parallel flash */
-+
-+/* Bits in the config registers */
-+#define	CC_CFG_EN		0x0001		/* Enable */
-+#define	CC_CFG_EM_MASK		0x000e		/* Extif Mode */
-+#define	CC_CFG_EM_ASYNC		0x0002		/*   Async/Parallel flash */
-+#define	CC_CFG_EM_SYNC		0x0004		/*   Synchronous */
-+#define	CC_CFG_EM_PCMCIA	0x0008		/*   PCMCIA */
-+#define	CC_CFG_EM_IDE		0x000a		/*   IDE */
-+#define	CC_CFG_DS		0x0010		/* Data size, 0=8bit, 1=16bit */
-+#define	CC_CFG_CD_MASK		0x0060		/* Sync: Clock divisor */
-+#define	CC_CFG_CE		0x0080		/* Sync: Clock enable */
-+#define	CC_CFG_SB		0x0100		/* Sync: Size/Bytestrobe */
-+
-+/* Start/busy bit in flashcontrol */
-+#define SFLASH_START		0x80000000
-+#define SFLASH_BUSY		SFLASH_START
-+
-+/* flashcontrol opcodes for ST flashes */
-+#define SFLASH_ST_WREN		0x0006		/* Write Enable */
-+#define SFLASH_ST_WRDIS		0x0004		/* Write Disable */
-+#define SFLASH_ST_RDSR		0x0105		/* Read Status Register */
-+#define SFLASH_ST_WRSR		0x0101		/* Write Status Register */
-+#define SFLASH_ST_READ		0x0303		/* Read Data Bytes */
-+#define SFLASH_ST_PP		0x0302		/* Page Program */
-+#define SFLASH_ST_SE		0x02d8		/* Sector Erase */
-+#define SFLASH_ST_BE		0x00c7		/* Bulk Erase */
-+#define SFLASH_ST_DP		0x00b9		/* Deep Power-down */
-+#define SFLASH_ST_RES		0x03ab		/* Read Electronic Signature */
-+
-+/* Status register bits for ST flashes */
-+#define SFLASH_ST_WIP		0x01		/* Write In Progress */
-+#define SFLASH_ST_WEL		0x02		/* Write Enable Latch */
-+#define SFLASH_ST_BP_MASK	0x1c		/* Block Protect */
-+#define SFLASH_ST_BP_SHIFT	2
-+#define SFLASH_ST_SRWD		0x80		/* Status Register Write Disable */
-+
-+/* flashcontrol opcodes for Atmel flashes */
-+#define SFLASH_AT_READ				0x07e8
-+#define SFLASH_AT_PAGE_READ			0x07d2
-+#define SFLASH_AT_BUF1_READ
-+#define SFLASH_AT_BUF2_READ
-+#define SFLASH_AT_STATUS			0x01d7
-+#define SFLASH_AT_BUF1_WRITE			0x0384
-+#define SFLASH_AT_BUF2_WRITE			0x0387
-+#define SFLASH_AT_BUF1_ERASE_PROGRAM		0x0283
-+#define SFLASH_AT_BUF2_ERASE_PROGRAM		0x0286
-+#define SFLASH_AT_BUF1_PROGRAM			0x0288
-+#define SFLASH_AT_BUF2_PROGRAM			0x0289
-+#define SFLASH_AT_PAGE_ERASE			0x0281
-+#define SFLASH_AT_BLOCK_ERASE			0x0250
-+#define SFLASH_AT_BUF1_WRITE_ERASE_PROGRAM	0x0382
-+#define SFLASH_AT_BUF2_WRITE_ERASE_PROGRAM	0x0385
-+#define SFLASH_AT_BUF1_LOAD			0x0253
-+#define SFLASH_AT_BUF2_LOAD			0x0255
-+#define SFLASH_AT_BUF1_COMPARE			0x0260
-+#define SFLASH_AT_BUF2_COMPARE			0x0261
-+#define SFLASH_AT_BUF1_REPROGRAM		0x0258
-+#define SFLASH_AT_BUF2_REPROGRAM		0x0259
-+
-+/* Status register bits for Atmel flashes */
-+#define SFLASH_AT_READY				0x80
-+#define SFLASH_AT_MISMATCH			0x40
-+#define SFLASH_AT_ID_MASK			0x38
-+#define SFLASH_AT_ID_SHIFT			3
-+
-+#endif	/* _SBCHIPC_H */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbconfig.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbconfig.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbconfig.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbconfig.h	2005-08-28 11:12:20.469853224 +0200
-@@ -0,0 +1,296 @@
-+/*
-+ * Broadcom SiliconBackplane hardware register definitions.
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation   
-+ * All Rights Reserved.   
-+ *    
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
-+ * $Id$
-+ */
-+
-+#ifndef	_SBCONFIG_H
-+#define	_SBCONFIG_H
-+
-+/* cpp contortions to concatenate w/arg prescan */
-+#ifndef PAD
-+#define	_PADLINE(line)	pad ## line
-+#define	_XSTR(line)	_PADLINE(line)
-+#define	PAD		_XSTR(__LINE__)
-+#endif
-+
-+/*
-+ * SiliconBackplane Address Map.
-+ * All regions may not exist on all chips.
-+ */
-+#define SB_SDRAM_BASE		0x00000000	/* Physical SDRAM */
-+#define SB_PCI_MEM		0x08000000	/* Host Mode PCI memory access space (64 MB) */
-+#define SB_PCI_CFG		0x0c000000	/* Host Mode PCI configuration space (64 MB) */
-+#define	SB_SDRAM_SWAPPED	0x10000000	/* Byteswapped Physical SDRAM */
-+#define SB_ENUM_BASE    	0x18000000	/* Enumeration space base */
-+#define	SB_ENUM_LIM		0x18010000	/* Enumeration space limit */
-+#define	SB_EXTIF_BASE		0x1f000000	/* External Interface region base address */
-+#define SB_PCI_DMA		0x40000000	/* Client Mode PCI memory access space (1 GB) */
-+#define	SB_EUART		(SB_EXTIF_BASE + 0x00800000)
-+#define	SB_LED			(SB_EXTIF_BASE + 0x00900000)
-+
-+/* enumeration space related defs */
-+#define SB_CORE_SIZE    	0x1000		/* each core gets 4Kbytes for registers */
-+#define	SB_MAXCORES		((SB_ENUM_LIM - SB_ENUM_BASE)/SB_CORE_SIZE)
-+#define	SBCONFIGOFF		0xf00		/* core sbconfig regs are top 256bytes of regs */
-+#define	SBCONFIGSIZE		256		/* sizeof (sbconfig_t) */
-+
-+/* mips address */
-+#define	SB_EJTAG		0xff200000	/* MIPS EJTAG space (2M) */
-+
-+/*
-+ * Sonics Configuration Space Registers.
-+ */
-+#ifdef _LANGUAGE_ASSEMBLY
-+
-+#define SBIPSFLAG		0x08
-+#define SBTPSFLAG		0x18
-+#define	SBTMERRLOGA		0x48		/* sonics >= 2.3 */
-+#define	SBTMERRLOG		0x50		/* sonics >= 2.3 */
-+#define SBADMATCH3		0x60
-+#define SBADMATCH2		0x68
-+#define SBADMATCH1		0x70
-+#define SBIMSTATE		0x90
-+#define SBINTVEC		0x94
-+#define SBTMSTATELOW		0x98
-+#define SBTMSTATEHIGH		0x9c
-+#define SBBWA0			0xa0
-+#define SBIMCONFIGLOW		0xa8
-+#define SBIMCONFIGHIGH		0xac
-+#define SBADMATCH0		0xb0
-+#define SBTMCONFIGLOW		0xb8
-+#define SBTMCONFIGHIGH		0xbc
-+#define SBBCONFIG		0xc0
-+#define SBBSTATE		0xc8
-+#define SBACTCNFG		0xd8
-+#define	SBFLAGST		0xe8
-+#define SBIDLOW			0xf8
-+#define SBIDHIGH		0xfc
-+
-+
-+#else
-+
-+typedef volatile struct _sbconfig {
-+	uint32	PAD[2];
-+	uint32	sbipsflag;		/* initiator port ocp slave flag */
-+	uint32	PAD[3];
-+	uint32	sbtpsflag;		/* target port ocp slave flag */
-+	uint32	PAD[11];
-+	uint32	sbtmerrloga;		/* (sonics >= 2.3) */
-+	uint32	PAD;
-+	uint32	sbtmerrlog;		/* (sonics >= 2.3) */
-+	uint32	PAD[3];
-+	uint32	sbadmatch3;		/* address match3 */
-+	uint32	PAD;
-+	uint32	sbadmatch2;		/* address match2 */
-+	uint32	PAD;
-+	uint32	sbadmatch1;		/* address match1 */
-+	uint32	PAD[7];
-+	uint32	sbimstate;		/* initiator agent state */
-+	uint32	sbintvec;		/* interrupt mask */
-+	uint32	sbtmstatelow;		/* target state */
-+	uint32	sbtmstatehigh;		/* target state */
-+	uint32	sbbwa0;			/* bandwidth allocation table0 */
-+	uint32	PAD;
-+	uint32	sbimconfiglow;		/* initiator configuration */
-+	uint32	sbimconfighigh;		/* initiator configuration */
-+	uint32	sbadmatch0;		/* address match0 */
-+	uint32	PAD;
-+	uint32	sbtmconfiglow;		/* target configuration */
-+	uint32	sbtmconfighigh;		/* target configuration */
-+	uint32	sbbconfig;		/* broadcast configuration */
-+	uint32	PAD;
-+	uint32	sbbstate;		/* broadcast state */
-+	uint32	PAD[3];
-+	uint32	sbactcnfg;		/* activate configuration */
-+	uint32	PAD[3];
-+	uint32	sbflagst;		/* current sbflags */
-+	uint32	PAD[3];
-+	uint32	sbidlow;		/* identification */
-+	uint32	sbidhigh;		/* identification */
-+} sbconfig_t;
-+
-+#endif /* _LANGUAGE_ASSEMBLY */
-+
-+/* sbipsflag */
-+#define	SBIPS_INT1_MASK		0x3f		/* which sbflags get routed to mips interrupt 1 */
-+#define	SBIPS_INT1_SHIFT	0
-+#define	SBIPS_INT2_MASK		0x3f00		/* which sbflags get routed to mips interrupt 2 */
-+#define	SBIPS_INT2_SHIFT	8
-+#define	SBIPS_INT3_MASK		0x3f0000	/* which sbflags get routed to mips interrupt 3 */
-+#define	SBIPS_INT3_SHIFT	16
-+#define	SBIPS_INT4_MASK		0x3f000000	/* which sbflags get routed to mips interrupt 4 */
-+#define	SBIPS_INT4_SHIFT	24
-+
-+/* sbtpsflag */
-+#define	SBTPS_NUM0_MASK		0x3f		/* interrupt sbFlag # generated by this core */
-+#define	SBTPS_F0EN0		0x40		/* interrupt is always sent on the backplane */
-+
-+/* sbtmerrlog */
-+#define	SBTMEL_CM		0x00000007	/* command */
-+#define	SBTMEL_CI		0x0000ff00	/* connection id */
-+#define	SBTMEL_EC		0x0f000000	/* error code */
-+#define	SBTMEL_ME		0x80000000	/* multiple error */
-+
-+/* sbimstate */
-+#define	SBIM_PC			0xf		/* pipecount */
-+#define	SBIM_AP_MASK		0x30		/* arbitration policy */
-+#define	SBIM_AP_BOTH		0x00		/* use both timeslaces and token */
-+#define	SBIM_AP_TS		0x10		/* use timesliaces only */
-+#define	SBIM_AP_TK		0x20		/* use token only */
-+#define	SBIM_AP_RSV		0x30		/* reserved */
-+#define	SBIM_IBE		0x20000		/* inbanderror */
-+#define	SBIM_TO			0x40000		/* timeout */
-+#define	SBIM_BY			0x01800000	/* busy (sonics >= 2.3) */
-+#define	SBIM_RJ			0x02000000	/* reject (sonics >= 2.3) */
-+
-+/* sbtmstatelow */
-+#define	SBTML_RESET		0x1		/* reset */
-+#define	SBTML_REJ		0x2		/* reject */
-+#define	SBTML_CLK		0x10000		/* clock enable */
-+#define	SBTML_FGC		0x20000		/* force gated clocks on */
-+#define	SBTML_FL_MASK		0x3ffc0000	/* core-specific flags */
-+#define	SBTML_PE		0x40000000	/* pme enable */
-+#define	SBTML_BE		0x80000000	/* bist enable */
-+
-+/* sbtmstatehigh */
-+#define	SBTMH_SERR		0x1		/* serror */
-+#define	SBTMH_INT		0x2		/* interrupt */
-+#define	SBTMH_BUSY		0x4		/* busy */
-+#define	SBTMH_TO		0x00000020	/* timeout (sonics >= 2.3) */
-+#define	SBTMH_FL_MASK		0x1fff0000	/* core-specific flags */
-+#define	SBTMH_GCR		0x20000000	/* gated clock request */
-+#define	SBTMH_BISTF		0x40000000	/* bist failed */
-+#define	SBTMH_BISTD		0x80000000	/* bist done */
-+
-+/* sbbwa0 */
-+#define	SBBWA_TAB0_MASK		0xffff		/* lookup table 0 */
-+#define	SBBWA_TAB1_MASK		0xffff		/* lookup table 1 */
-+#define	SBBWA_TAB1_SHIFT	16
-+
-+/* sbimconfiglow */
-+#define	SBIMCL_STO_MASK		0x7		/* service timeout */
-+#define	SBIMCL_RTO_MASK		0x70		/* request timeout */
-+#define	SBIMCL_RTO_SHIFT	4
-+#define	SBIMCL_CID_MASK		0xff0000	/* connection id */
-+#define	SBIMCL_CID_SHIFT	16
-+
-+/* sbimconfighigh */
-+#define	SBIMCH_IEM_MASK		0xc		/* inband error mode */
-+#define	SBIMCH_TEM_MASK		0x30		/* timeout error mode */
-+#define	SBIMCH_TEM_SHIFT	4
-+#define	SBIMCH_BEM_MASK		0xc0		/* bus error mode */
-+#define	SBIMCH_BEM_SHIFT	6
-+
-+/* sbadmatch0 */
-+#define	SBAM_TYPE_MASK		0x3		/* address type */
-+#define	SBAM_AD64		0x4		/* reserved */
-+#define	SBAM_ADINT0_MASK	0xf8		/* type0 size */
-+#define	SBAM_ADINT0_SHIFT	3
-+#define	SBAM_ADINT1_MASK	0x1f8		/* type1 size */
-+#define	SBAM_ADINT1_SHIFT	3
-+#define	SBAM_ADINT2_MASK	0x1f8		/* type2 size */
-+#define	SBAM_ADINT2_SHIFT	3
-+#define	SBAM_ADEN		0x400		/* enable */
-+#define	SBAM_ADNEG		0x800		/* negative decode */
-+#define	SBAM_BASE0_MASK		0xffffff00	/* type0 base address */
-+#define	SBAM_BASE0_SHIFT	8
-+#define	SBAM_BASE1_MASK		0xfffff000	/* type1 base address for the core */
-+#define	SBAM_BASE1_SHIFT	12
-+#define	SBAM_BASE2_MASK		0xffff0000	/* type2 base address for the core */
-+#define	SBAM_BASE2_SHIFT	16
-+
-+/* sbtmconfiglow */
-+#define	SBTMCL_CD_MASK		0xff		/* clock divide */
-+#define	SBTMCL_CO_MASK		0xf800		/* clock offset */
-+#define	SBTMCL_CO_SHIFT		11
-+#define	SBTMCL_IF_MASK		0xfc0000	/* interrupt flags */
-+#define	SBTMCL_IF_SHIFT		18
-+#define	SBTMCL_IM_MASK		0x3000000	/* interrupt mode */
-+#define	SBTMCL_IM_SHIFT		24
-+
-+/* sbtmconfighigh */
-+#define	SBTMCH_BM_MASK		0x3		/* busy mode */
-+#define	SBTMCH_RM_MASK		0x3		/* retry mode */
-+#define	SBTMCH_RM_SHIFT		2
-+#define	SBTMCH_SM_MASK		0x30		/* stop mode */
-+#define	SBTMCH_SM_SHIFT		4
-+#define	SBTMCH_EM_MASK		0x300		/* sb error mode */
-+#define	SBTMCH_EM_SHIFT		8
-+#define	SBTMCH_IM_MASK		0xc00		/* int mode */
-+#define	SBTMCH_IM_SHIFT		10
-+
-+/* sbbconfig */
-+#define	SBBC_LAT_MASK		0x3		/* sb latency */
-+#define	SBBC_MAX0_MASK		0xf0000		/* maxccntr0 */
-+#define	SBBC_MAX0_SHIFT		16
-+#define	SBBC_MAX1_MASK		0xf00000	/* maxccntr1 */
-+#define	SBBC_MAX1_SHIFT		20
-+
-+/* sbbstate */
-+#define	SBBS_SRD		0x1		/* st reg disable */
-+#define	SBBS_HRD		0x2		/* hold reg disable */
-+
-+/* sbidlow */
-+#define	SBIDL_CS_MASK		0x3		/* config space */
-+#define	SBIDL_AR_MASK		0x38		/* # address ranges supported */
-+#define	SBIDL_AR_SHIFT		3
-+#define	SBIDL_SYNCH		0x40		/* sync */
-+#define	SBIDL_INIT		0x80		/* initiator */
-+#define	SBIDL_MINLAT_MASK	0xf00		/* minimum backplane latency */
-+#define	SBIDL_MINLAT_SHIFT	8
-+#define	SBIDL_MAXLAT		0xf000		/* maximum backplane latency */
-+#define	SBIDL_MAXLAT_SHIFT	12
-+#define	SBIDL_FIRST		0x10000		/* this initiator is first */
-+#define	SBIDL_CW_MASK		0xc0000		/* cycle counter width */
-+#define	SBIDL_CW_SHIFT		18
-+#define	SBIDL_TP_MASK		0xf00000	/* target ports */
-+#define	SBIDL_TP_SHIFT		20
-+#define	SBIDL_IP_MASK		0xf000000	/* initiator ports */
-+#define	SBIDL_IP_SHIFT		24
-+#define	SBIDL_RV_MASK		0xf0000000	/* sonics backplane revision code */
-+#define	SBIDL_RV_SHIFT		28
-+
-+/* sbidhigh */
-+#define	SBIDH_RC_MASK		0xf		/* revision code*/
-+#define	SBIDH_CC_MASK		0xfff0		/* core code */
-+#define	SBIDH_CC_SHIFT		4
-+#define	SBIDH_VC_MASK		0xffff0000	/* vendor code */
-+#define	SBIDH_VC_SHIFT		16
-+
-+#define	SB_COMMIT		0xfd8		/* update buffered registers value */
-+
-+/* vendor codes */
-+#define	SB_VEND_BCM		0x4243		/* Broadcom's SB vendor code */
-+
-+/* core codes */
-+#define	SB_CC			0x800		/* chipcommon core */
-+#define	SB_ILINE20		0x801		/* iline20 core */
-+#define	SB_SDRAM		0x803		/* sdram core */
-+#define	SB_PCI			0x804		/* pci core */
-+#define	SB_MIPS			0x805		/* mips core */
-+#define	SB_ENET			0x806		/* enet mac core */
-+#define	SB_CODEC		0x807		/* v90 codec core */
-+#define	SB_USB			0x808		/* usb 1.1 host/device core */
-+#define	SB_ILINE100		0x80a		/* iline100 core */
-+#define	SB_IPSEC		0x80b		/* ipsec core */
-+#define	SB_PCMCIA		0x80d		/* pcmcia core */
-+#define	SB_MEMC			0x80f		/* memc sdram core */
-+#define	SB_EXTIF		0x811		/* external interface core */
-+#define	SB_D11			0x812		/* 802.11 MAC core */
-+#define	SB_MIPS33		0x816		/* mips3302 core */
-+#define	SB_USB11H		0x817		/* usb 1.1 host core */
-+#define	SB_USB11D		0x818		/* usb 1.1 device core */
-+#define	SB_USB20H		0x819		/* usb 2.0 host core */
-+#define	SB_USB20D		0x81A		/* usb 2.0 device core */
-+#define	SB_SDIOH		0x81B		/* sdio host core */
-+#define SB_ROBO                 0x81C           /* robo switch core */
-+
-+#endif	/* _SBCONFIG_H */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbextif.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbextif.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbextif.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbextif.h	2005-08-28 11:12:20.470853072 +0200
-@@ -0,0 +1,242 @@
-+/*
-+ * Hardware-specific External Interface I/O core definitions
-+ * for the BCM47xx family of SiliconBackplane-based chips.
-+ *
-+ * The External Interface core supports a total of three external chip selects
-+ * supporting external interfaces. One of the external chip selects is
-+ * used for Flash, one is used for PCMCIA, and the other may be
-+ * programmed to support either a synchronous interface or an
-+ * asynchronous interface. The asynchronous interface can be used to
-+ * support external devices such as UARTs and the BCM2019 Bluetooth
-+ * baseband processor.
-+ * The external interface core also contains 2 on-chip 16550 UARTs, clock
-+ * frequency control, a watchdog interrupt timer, and a GPIO interface.
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation   
-+ * All Rights Reserved.   
-+ *    
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
-+ * $Id$
-+ */
-+
-+#ifndef	_SBEXTIF_H
-+#define	_SBEXTIF_H
-+
-+/* external interface address space */
-+#define	EXTIF_PCMCIA_MEMBASE(x)	(x)
-+#define	EXTIF_PCMCIA_IOBASE(x)	((x) + 0x100000)
-+#define	EXTIF_PCMCIA_CFGBASE(x)	((x) + 0x200000)
-+#define	EXTIF_CFGIF_BASE(x)	((x) + 0x800000)
-+#define	EXTIF_FLASH_BASE(x)	((x) + 0xc00000)
-+
-+/* cpp contortions to concatenate w/arg prescan */
-+#ifndef PAD
-+#define	_PADLINE(line)	pad ## line
-+#define	_XSTR(line)	_PADLINE(line)
-+#define	PAD		_XSTR(__LINE__)
-+#endif	/* PAD */
-+
-+/*
-+ * The multiple instances of output and output enable registers
-+ * are present to allow driver software for multiple cores to control
-+ * gpio outputs without needing to share a single register pair.
-+ */
-+struct gpiouser {
-+	uint32	out;
-+	uint32	outen;
-+};
-+#define	NGPIOUSER	5
-+
-+typedef volatile struct {
-+	uint32	corecontrol;
-+	uint32	extstatus;
-+	uint32	PAD[2];
-+
-+	/* pcmcia control registers */
-+	uint32	pcmcia_config;
-+	uint32	pcmcia_memwait;
-+	uint32	pcmcia_attrwait;
-+	uint32	pcmcia_iowait;
-+
-+	/* programmable interface control registers */
-+	uint32	prog_config;
-+	uint32	prog_waitcount;
-+
-+	/* flash control registers */
-+	uint32	flash_config;
-+	uint32	flash_waitcount;
-+	uint32	PAD[4];
-+
-+	uint32	watchdog;
-+
-+	/* clock control */
-+	uint32	clockcontrol_n;
-+	uint32	clockcontrol_sb;
-+	uint32	clockcontrol_pci;
-+	uint32	clockcontrol_mii;
-+	uint32	PAD[3];
-+
-+	/* gpio */
-+	uint32	gpioin;
-+	struct gpiouser	gpio[NGPIOUSER];
-+	uint32	PAD;
-+	uint32	ejtagouten;
-+	uint32	gpiointpolarity;
-+	uint32	gpiointmask;
-+	uint32	PAD[153];
-+
-+	uint8	uartdata;
-+	uint8	PAD[3];
-+	uint8	uartimer;
-+	uint8	PAD[3];
-+	uint8	uartfcr;
-+	uint8	PAD[3];
-+	uint8	uartlcr;
-+	uint8	PAD[3];
-+	uint8	uartmcr;
-+	uint8	PAD[3];
-+	uint8	uartlsr;
-+	uint8	PAD[3];
-+	uint8	uartmsr;
-+	uint8	PAD[3];
-+	uint8	uartscratch;
-+	uint8	PAD[3];
-+} extifregs_t;
-+
-+/* corecontrol */
-+#define	CC_UE		(1 << 0)		/* uart enable */
-+
-+/* extstatus */
-+#define	ES_EM		(1 << 0)		/* endian mode (ro) */
-+#define	ES_EI		(1 << 1)		/* external interrupt pin (ro) */
-+#define	ES_GI		(1 << 2)		/* gpio interrupt pin (ro) */
-+
-+/* gpio bit mask */
-+#define GPIO_BIT0	(1 << 0)
-+#define GPIO_BIT1	(1 << 1)
-+#define GPIO_BIT2	(1 << 2)
-+#define GPIO_BIT3	(1 << 3)
-+#define GPIO_BIT4	(1 << 4)
-+#define GPIO_BIT5	(1 << 5)
-+#define GPIO_BIT6	(1 << 6)
-+#define GPIO_BIT7	(1 << 7)
-+
-+
-+/* pcmcia/prog/flash_config */
-+#define	CF_EN		(1 << 0)		/* enable */
-+#define	CF_EM_MASK	0xe			/* mode */
-+#define	CF_EM_SHIFT	1
-+#define	CF_EM_FLASH	0x0			/* flash/asynchronous mode */
-+#define	CF_EM_SYNC	0x2			/* synchronous mode */
-+#define	CF_EM_PCMCIA	0x4			/* pcmcia mode */
-+#define	CF_DS		(1 << 4)		/* destsize:  0=8bit, 1=16bit */
-+#define	CF_BS		(1 << 5)		/* byteswap */
-+#define	CF_CD_MASK	0xc0			/* clock divider */
-+#define	CF_CD_SHIFT	6
-+#define	CF_CD_DIV2	0x0			/* backplane/2 */
-+#define	CF_CD_DIV3	0x40			/* backplane/3 */
-+#define	CF_CD_DIV4	0x80			/* backplane/4 */
-+#define	CF_CE		(1 << 8)		/* clock enable */
-+#define	CF_SB		(1 << 9)		/* size/bytestrobe (synch only) */
-+
-+/* pcmcia_memwait */
-+#define	PM_W0_MASK	0x3f			/* waitcount0 */
-+#define	PM_W1_MASK	0x1f00			/* waitcount1 */
-+#define	PM_W1_SHIFT	8
-+#define	PM_W2_MASK	0x1f0000		/* waitcount2 */
-+#define	PM_W2_SHIFT	16
-+#define	PM_W3_MASK	0x1f000000		/* waitcount3 */
-+#define	PM_W3_SHIFT	24
-+
-+/* pcmcia_attrwait */
-+#define	PA_W0_MASK	0x3f			/* waitcount0 */
-+#define	PA_W1_MASK	0x1f00			/* waitcount1 */
-+#define	PA_W1_SHIFT	8
-+#define	PA_W2_MASK	0x1f0000		/* waitcount2 */
-+#define	PA_W2_SHIFT	16
-+#define	PA_W3_MASK	0x1f000000		/* waitcount3 */
-+#define	PA_W3_SHIFT	24
-+
-+/* pcmcia_iowait */
-+#define	PI_W0_MASK	0x3f			/* waitcount0 */
-+#define	PI_W1_MASK	0x1f00			/* waitcount1 */
-+#define	PI_W1_SHIFT	8
-+#define	PI_W2_MASK	0x1f0000		/* waitcount2 */
-+#define	PI_W2_SHIFT	16
-+#define	PI_W3_MASK	0x1f000000		/* waitcount3 */
-+#define	PI_W3_SHIFT	24
-+
-+/* prog_waitcount */
-+#define	PW_W0_MASK	0x0000001f			/* waitcount0 */
-+#define	PW_W1_MASK	0x00001f00			/* waitcount1 */
-+#define	PW_W1_SHIFT	8
-+#define	PW_W2_MASK	0x001f0000		/* waitcount2 */
-+#define	PW_W2_SHIFT	16
-+#define	PW_W3_MASK	0x1f000000		/* waitcount3 */
-+#define	PW_W3_SHIFT	24
-+
-+#define PW_W0       0x0000000c
-+#define PW_W1       0x00000a00
-+#define PW_W2       0x00020000
-+#define PW_W3       0x01000000
-+
-+/* flash_waitcount */
-+#define	FW_W0_MASK	0x1f			/* waitcount0 */
-+#define	FW_W1_MASK	0x1f00			/* waitcount1 */
-+#define	FW_W1_SHIFT	8
-+#define	FW_W2_MASK	0x1f0000		/* waitcount2 */
-+#define	FW_W2_SHIFT	16
-+#define	FW_W3_MASK	0x1f000000		/* waitcount3 */
-+#define	FW_W3_SHIFT	24
-+
-+/* watchdog */
-+#define WATCHDOG_CLOCK	48000000		/* Hz */
-+
-+/* clockcontrol_n */
-+#define	CN_N1_MASK	0x3f			/* n1 control */
-+#define	CN_N2_MASK	0x3f00			/* n2 control */
-+#define	CN_N2_SHIFT	8
-+
-+/* clockcontrol_sb/pci/mii */
-+#define	CC_M1_MASK	0x3f			/* m1 control */
-+#define	CC_M2_MASK	0x3f00			/* m2 control */
-+#define	CC_M2_SHIFT	8
-+#define	CC_M3_MASK	0x3f0000		/* m3 control */
-+#define	CC_M3_SHIFT	16
-+#define	CC_MC_MASK	0x1f000000		/* mux control */
-+#define	CC_MC_SHIFT	24
-+
-+/* Clock control default values */
-+#define CC_DEF_N	0x0009			/* Default values for bcm4710 */
-+#define CC_DEF_100	0x04020011
-+#define CC_DEF_33	0x11030011
-+#define CC_DEF_25	0x11050011
-+
-+/* Clock control values for 125Mhz */
-+#define	CC_125_N	0x0802
-+#define	CC_125_M	0x04020009
-+#define	CC_125_M25	0x11090009
-+#define	CC_125_M33	0x11090005
-+
-+/* Clock control magic field values */
-+#define	CC_F6_2		0x02			/* A factor of 2 in */
-+#define	CC_F6_3		0x03			/*  6-bit fields like */
-+#define	CC_F6_4		0x05			/*  N1, M1 or M3 */
-+#define	CC_F6_5		0x09
-+#define	CC_F6_6		0x11
-+#define	CC_F6_7		0x21
-+
-+#define	CC_F5_BIAS	5			/* 5-bit fields get this added */
-+
-+#define	CC_MC_BYPASS	0x08
-+#define	CC_MC_M1	0x04
-+#define	CC_MC_M1M2	0x02
-+#define	CC_MC_M1M2M3	0x01
-+#define	CC_MC_M1M3	0x11
-+
-+#define	CC_CLOCK_BASE	24000000	/* Half the clock freq. in the 4710 */
-+
-+#endif	/* _SBEXTIF_H */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbmemc.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbmemc.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbmemc.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbmemc.h	2005-08-28 11:12:20.471852920 +0200
-@@ -0,0 +1,144 @@
-+/*
-+ * BCM47XX Sonics SiliconBackplane DDR/SDRAM controller core hardware definitions.
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation   
-+ * All Rights Reserved.   
-+ *    
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
-+ * $Id$
-+ */
-+
-+#ifndef	_SBMEMC_H
-+#define	_SBMEMC_H
-+
-+#ifdef _LANGUAGE_ASSEMBLY
-+
-+#define	MEMC_CONTROL		0x00
-+#define	MEMC_CONFIG		0x04
-+#define	MEMC_REFRESH		0x08
-+#define	MEMC_BISTSTAT		0x0c
-+#define	MEMC_MODEBUF		0x10
-+#define	MEMC_BKCLS		0x14
-+#define	MEMC_PRIORINV		0x18
-+#define	MEMC_DRAMTIM		0x1c
-+#define	MEMC_INTSTAT		0x20
-+#define	MEMC_INTMASK		0x24
-+#define	MEMC_INTINFO		0x28
-+#define	MEMC_NCDLCTL		0x30
-+#define	MEMC_RDNCDLCOR		0x34
-+#define	MEMC_WRNCDLCOR		0x38
-+#define	MEMC_MISCDLYCTL		0x3c
-+#define	MEMC_DQSGATENCDL	0x40
-+#define	MEMC_SPARE		0x44
-+#define	MEMC_TPADDR		0x48
-+#define	MEMC_TPDATA		0x4c
-+#define	MEMC_BARRIER		0x50
-+#define	MEMC_CORE		0x54
-+
-+
-+#else
-+
-+/* Sonics side: MEMC core registers */
-+typedef volatile struct sbmemcregs {
-+	uint32	control;
-+	uint32	config;
-+	uint32	refresh;
-+	uint32	biststat;
-+	uint32	modebuf;
-+	uint32	bkcls;
-+	uint32	priorinv;
-+	uint32	dramtim;
-+	uint32	intstat;
-+	uint32	intmask;
-+	uint32	intinfo;
-+	uint32	reserved1;
-+	uint32	ncdlctl;
-+	uint32	rdncdlcor;
-+	uint32	wrncdlcor;
-+	uint32	miscdlyctl;
-+	uint32	dqsgatencdl;
-+	uint32	spare;
-+	uint32	tpaddr;
-+	uint32	tpdata;
-+	uint32	barrier;
-+	uint32	core;
-+} sbmemcregs_t;
-+
-+#endif
-+
-+/* MEMC Core Init values (OCP ID 0x80f) */
-+
-+/* For sdr: */
-+#define MEMC_SD_CONFIG_INIT	0x00048000
-+#define MEMC_SD_DRAMTIM_INIT	0x000754da
-+#define MEMC_SD_RDNCDLCOR_INIT	0x00000000
-+#define MEMC_SD_WRNCDLCOR_INIT	0x49351200
-+#define MEMC_SD1_WRNCDLCOR_INIT	0x14500200	/* For corerev 1 (4712) */
-+#define MEMC_SD_MISCDLYCTL_INIT	0x00061c1b
-+#define MEMC_SD1_MISCDLYCTL_INIT 0x00021416	/* For corerev 1 (4712) */
-+#define MEMC_SD_CONTROL_INIT0	0x00000002
-+#define MEMC_SD_CONTROL_INIT1	0x00000008
-+#define MEMC_SD_CONTROL_INIT2	0x00000004
-+#define MEMC_SD_CONTROL_INIT3	0x00000010
-+#define MEMC_SD_CONTROL_INIT4	0x00000001
-+#define MEMC_SD_MODEBUF_INIT	0x00000000
-+#define MEMC_SD_REFRESH_INIT	0x0000840f
-+
-+
-+/* This is for SDRM8X8X4 */
-+#define	MEMC_SDR_INIT		0x0008
-+#define	MEMC_SDR_MODE		0x32
-+#define	MEMC_SDR_NCDL		0x00020032
-+#define	MEMC_SDR1_NCDL		0x0002020f	/* For corerev 1 (4712) */
-+
-+/* For ddr: */
-+#define MEMC_CONFIG_INIT	0x00048000
-+#define MEMC_DRAMTIM_INIT	0x000754d9
-+#define MEMC_RDNCDLCOR_INIT	0x00000000
-+#define MEMC_WRNCDLCOR_INIT	0x49351200
-+#define MEMC_1_WRNCDLCOR_INIT	0x14500200
-+#define MEMC_DQSGATENCDL_INIT	0x00030000
-+#define MEMC_MISCDLYCTL_INIT	0x21061c1b
-+#define MEMC_1_MISCDLYCTL_INIT	0x21021400
-+#define MEMC_NCDLCTL_INIT	0x00002001
-+#define MEMC_CONTROL_INIT0	0x00000002
-+#define MEMC_CONTROL_INIT1	0x00000008
-+#define MEMC_MODEBUF_INIT0	0x00004000
-+#define MEMC_CONTROL_INIT2	0x00000010
-+#define MEMC_MODEBUF_INIT1	0x00000100
-+#define MEMC_CONTROL_INIT3	0x00000010
-+#define MEMC_CONTROL_INIT4	0x00000008
-+#define MEMC_REFRESH_INIT	0x0000840f
-+#define MEMC_CONTROL_INIT5	0x00000004
-+#define MEMC_MODEBUF_INIT2	0x00000000
-+#define MEMC_CONTROL_INIT6	0x00000010
-+#define MEMC_CONTROL_INIT7	0x00000001
-+
-+
-+/* This is for DDRM16X16X2 */
-+#define	MEMC_DDR_INIT		0x0009
-+#define	MEMC_DDR_MODE		0x62
-+#define	MEMC_DDR_NCDL		0x0005050a
-+#define	MEMC_DDR1_NCDL		0x00000a0a	/* For corerev 1 (4712) */
-+
-+/* mask for sdr/ddr calibration registers */
-+#define MEMC_RDNCDLCOR_RD_MASK	0x000000ff
-+#define MEMC_WRNCDLCOR_WR_MASK	0x000000ff
-+#define MEMC_DQSGATENCDL_G_MASK	0x000000ff
-+
-+/* masks for miscdlyctl registers */
-+#define MEMC_MISC_SM_MASK	0x30000000
-+#define MEMC_MISC_SM_SHIFT	28
-+#define MEMC_MISC_SD_MASK	0x0f000000
-+#define MEMC_MISC_SD_SHIFT	24
-+
-+/* hw threshhold for calculating wr/rd for sdr memc */
-+#define MEMC_CD_THRESHOLD	128
-+
-+/* Low bit of init register says if memc is ddr or sdr */
-+#define MEMC_CONFIG_DDR		0x00000001
-+
-+#endif	/* _SBMEMC_H */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbmips.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbmips.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbmips.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbmips.h	2005-08-28 11:12:20.471852920 +0200
-@@ -0,0 +1,56 @@
-+/*
-+ * Broadcom SiliconBackplane MIPS definitions
-+ *
-+ * SB MIPS cores are custom MIPS32 processors with SiliconBackplane
-+ * OCP interfaces. The CP0 processor ID is 0x00024000, where bits
-+ * 23:16 mean Broadcom and bits 15:8 mean a MIPS core with an OCP
-+ * interface. The core revision is stored in the SB ID register in SB
-+ * configuration space.
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#ifndef	_SBMIPS_H
-+#define	_SBMIPS_H
-+
-+#ifndef _LANGUAGE_ASSEMBLY
-+
-+/* cpp contortions to concatenate w/arg prescan */
-+#ifndef PAD
-+#define	_PADLINE(line)	pad ## line
-+#define	_XSTR(line)	_PADLINE(line)
-+#define	PAD		_XSTR(__LINE__)
-+#endif	/* PAD */
-+
-+typedef volatile struct {
-+	uint32	corecontrol;
-+	uint32	PAD[2];
-+	uint32	biststatus;
-+	uint32	PAD[4];
-+	uint32	intstatus;
-+	uint32	intmask;
-+	uint32	timer;
-+} mipsregs_t;
-+
-+extern uint32 sb_flag(void *sbh);
-+extern uint sb_irq(void *sbh);
-+
-+extern void sb_serial_init(void *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift));
-+
-+extern void sb_mips_init(void *sbh);
-+extern uint32 sb_mips_clock(void *sbh);
-+extern bool sb_mips_setclock(void *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock);
-+
-+extern uint32 sb_memc_get_ncdl(void *sbh);
-+
-+#endif /* _LANGUAGE_ASSEMBLY */
-+
-+#endif	/* _SBMIPS_H */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbpci.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbpci.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbpci.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbpci.h	2005-08-28 11:12:20.471852920 +0200
-@@ -0,0 +1,113 @@
-+/*
-+ * BCM47XX Sonics SiliconBackplane PCI core hardware definitions.
-+ *
-+ * $Id$
-+ * Copyright 2001-2003, Broadcom Corporation   
-+ * All Rights Reserved.   
-+ *    
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
-+ */
-+
-+#ifndef	_SBPCI_H
-+#define	_SBPCI_H
-+
-+/* cpp contortions to concatenate w/arg prescan */
-+#ifndef PAD
-+#define	_PADLINE(line)	pad ## line
-+#define	_XSTR(line)	_PADLINE(line)
-+#define	PAD		_XSTR(__LINE__)
-+#endif
-+
-+/* Sonics side: PCI core and host control registers */
-+typedef struct sbpciregs {
-+	uint32 control;		/* PCI control */
-+	uint32 PAD[3];
-+	uint32 arbcontrol;	/* PCI arbiter control */
-+	uint32 PAD[3];
-+	uint32 intstatus;	/* Interrupt status */
-+	uint32 intmask;		/* Interrupt mask */
-+	uint32 sbtopcimailbox;	/* Sonics to PCI mailbox */
-+	uint32 PAD[9];
-+	uint32 bcastaddr;	/* Sonics broadcast address */
-+	uint32 bcastdata;	/* Sonics broadcast data */
-+	uint32 PAD[2];
-+	uint32 gpioin;		/* ro: gpio input (>=rev2) */
-+	uint32 gpioout;		/* rw: gpio output (>=rev2) */
-+	uint32 gpioouten;	/* rw: gpio output enable (>= rev2) */
-+	uint32 gpiocontrol;	/* rw: gpio control (>= rev2) */
-+	uint32 PAD[36];
-+	uint32 sbtopci0;	/* Sonics to PCI translation 0 */
-+	uint32 sbtopci1;	/* Sonics to PCI translation 1 */
-+	uint32 sbtopci2;	/* Sonics to PCI translation 2 */
-+	uint32 PAD[445];
-+	uint16 sprom[36];	/* SPROM shadow Area */
-+	uint32 PAD[46];
-+} sbpciregs_t;
-+
-+/* PCI control */
-+#define PCI_RST_OE	0x01	/* When set, drives PCI_RESET out to pin */
-+#define PCI_RST		0x02	/* Value driven out to pin */
-+#define PCI_CLK_OE	0x04	/* When set, drives clock as gated by PCI_CLK out to pin */
-+#define PCI_CLK		0x08	/* Gate for clock driven out to pin */	
-+
-+/* PCI arbiter control */
-+#define PCI_INT_ARB	0x01	/* When set, use an internal arbiter */
-+#define PCI_EXT_ARB	0x02	/* When set, use an external arbiter */
-+#define PCI_PARKID_MASK	0x06	/* Selects which agent is parked on an idle bus */
-+#define PCI_PARKID_SHIFT   1
-+#define PCI_PARKID_LAST	   0	/* Last requestor */
-+#define PCI_PARKID_4710	   1	/* 4710 */
-+#define PCI_PARKID_EXTREQ0 2	/* External requestor 0 */
-+#define PCI_PARKID_EXTREQ1 3	/* External requestor 1 */
-+
-+/* Interrupt status/mask */
-+#define PCI_INTA	0x01	/* PCI INTA# is asserted */
-+#define PCI_INTB	0x02	/* PCI INTB# is asserted */
-+#define PCI_SERR	0x04	/* PCI SERR# has been asserted (write one to clear) */
-+#define PCI_PERR	0x08	/* PCI PERR# has been asserted (write one to clear) */
-+#define PCI_PME		0x10	/* PCI PME# is asserted */
-+
-+/* (General) PCI/SB mailbox interrupts, two bits per pci function */
-+#define	MAILBOX_F0_0	0x100	/* function 0, int 0 */
-+#define	MAILBOX_F0_1	0x200	/* function 0, int 1 */
-+#define	MAILBOX_F1_0	0x400	/* function 1, int 0 */
-+#define	MAILBOX_F1_1	0x800	/* function 1, int 1 */
-+#define	MAILBOX_F2_0	0x1000	/* function 2, int 0 */
-+#define	MAILBOX_F2_1	0x2000	/* function 2, int 1 */
-+#define	MAILBOX_F3_0	0x4000	/* function 3, int 0 */
-+#define	MAILBOX_F3_1	0x8000	/* function 3, int 1 */
-+
-+/* Sonics broadcast address */
-+#define BCAST_ADDR_MASK	0xff	/* Broadcast register address */
-+
-+/* Sonics to PCI translation types */
-+#define SBTOPCI0_MASK	0xfc000000
-+#define SBTOPCI1_MASK	0xfc000000
-+#define SBTOPCI2_MASK	0xc0000000
-+#define SBTOPCI_MEM	0
-+#define SBTOPCI_IO	1
-+#define SBTOPCI_CFG0	2
-+#define SBTOPCI_CFG1	3
-+#define	SBTOPCI_PREF	0x4	/* prefetch enable */
-+#define	SBTOPCI_BURST	0x8	/* burst enable */
-+
-+/* PCI side: Reserved PCI configuration registers (see pcicfg.h) */
-+#define cap_list	rsvd_a[0]
-+#define bar0_window	dev_dep[0x80 - 0x40]
-+#define bar1_window	dev_dep[0x84 - 0x40]
-+#define sprom_control	dev_dep[0x88 - 0x40]
-+
-+#ifndef _LANGUAGE_ASSEMBLY
-+
-+extern int sbpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len);
-+extern int sbpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len);
-+extern void sbpci_ban(uint16 core);
-+extern int sbpci_init(void *sbh);
-+extern void sbpci_check(void *sbh);
-+
-+#endif /* !_LANGUAGE_ASSEMBLY */
-+
-+#endif	/* _SBPCI_H */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbpcmcia.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbpcmcia.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbpcmcia.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbpcmcia.h	2005-08-28 11:12:20.472852768 +0200
-@@ -0,0 +1,131 @@
-+/*
-+ * BCM43XX Sonics SiliconBackplane PCMCIA core hardware definitions.
-+ *
-+ * $Id$
-+ * Copyright 2001-2003, Broadcom Corporation   
-+ * All Rights Reserved.   
-+ *    
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
-+ */
-+
-+#ifndef	_SBPCMCIA_H
-+#define	_SBPCMCIA_H
-+
-+
-+/* All the addresses that are offsets in attribute space are divided
-+ * by two to account for the fact that odd bytes are invalid in
-+ * attribute space and our read/write routines make the space appear
-+ * as if they didn't exist. Still we want to show the original numbers
-+ * as documented in the hnd_pcmcia core manual.
-+ */
-+
-+/* PCMCIA Function Configuration Registers */
-+#define	PCMCIA_FCR		(0x700 / 2)
-+
-+#define	FCR0_OFF		0
-+#define	FCR1_OFF		(0x40 / 2)
-+#define	FCR2_OFF		(0x80 / 2)
-+#define	FCR3_OFF		(0xc0 / 2)
-+
-+#define	PCMCIA_FCR0		(0x700 / 2)
-+#define	PCMCIA_FCR1		(0x740 / 2)
-+#define	PCMCIA_FCR2		(0x780 / 2)
-+#define	PCMCIA_FCR3		(0x7c0 / 2)
-+
-+/* Standard PCMCIA FCR registers */
-+
-+#define	PCMCIA_COR		0
-+
-+#define	COR_RST			0x80
-+#define	COR_LEV			0x40
-+#define	COR_IRQEN		0x04
-+#define	COR_BLREN		0x01
-+#define	COR_FUNEN		0x01
-+
-+
-+#define	PCICIA_FCSR		(2 / 2)
-+#define	PCICIA_PRR		(4 / 2)
-+#define	PCICIA_SCR		(6 / 2)
-+#define	PCICIA_ESR		(8 / 2)
-+
-+
-+#define PCM_MEMOFF		0x0000
-+#define F0_MEMOFF		0x1000
-+#define F1_MEMOFF		0x2000
-+#define F2_MEMOFF		0x3000
-+#define F3_MEMOFF		0x4000
-+
-+/* Memory base in the function fcr's */
-+#define MEM_ADDR0		(0x728 / 2)
-+#define MEM_ADDR1		(0x72a / 2)
-+#define MEM_ADDR2		(0x72c / 2)
-+
-+/* PCMCIA base plus Srom access in fcr0: */
-+#define PCMCIA_ADDR0		(0x072e / 2)
-+#define PCMCIA_ADDR1		(0x0730 / 2)
-+#define PCMCIA_ADDR2		(0x0732 / 2)
-+
-+#define MEM_SEG			(0x0734 / 2)
-+#define SROM_CS			(0x0736 / 2)
-+#define SROM_DATAL		(0x0738 / 2)
-+#define SROM_DATAH		(0x073a / 2)
-+#define SROM_ADDRL		(0x073c / 2)
-+#define SROM_ADDRH		(0x073e / 2)
-+
-+/*  Values for srom_cs: */
-+#define SROM_IDLE		0
-+#define SROM_WRITE		1
-+#define SROM_READ		2
-+#define SROM_WEN		4
-+#define SROM_WDS		7
-+#define SROM_DONE		8
-+
-+/* CIS stuff */
-+
-+/* The CIS stops where the FCRs start */
-+#define	CIS_SIZE		PCMCIA_FCR
-+
-+/* Standard tuples we know about */
-+
-+#define	CISTPL_MANFID		0x20		/* Manufacturer and device id */
-+#define	CISTPL_FUNCE		0x22		/* Function extensions */
-+#define	CISTPL_CFTABLE		0x1b		/* Config table entry */
-+
-+/* Function extensions for LANs */
-+
-+#define	LAN_TECH		1		/* Technology type */
-+#define	LAN_SPEED		2		/* Raw bit rate */
-+#define	LAN_MEDIA		3		/* Transmission media */
-+#define	LAN_NID			4		/* Node identification (aka MAC addr) */
-+#define	LAN_CONN		5		/* Connector standard */
-+
-+
-+/* CFTable */
-+#define CFTABLE_REGWIN_2K	0x08		/* 2k reg windows size */
-+#define CFTABLE_REGWIN_4K	0x10		/* 4k reg windows size */
-+#define CFTABLE_REGWIN_8K	0x20		/* 8k reg windows size */
-+
-+/* Vendor unique tuples are 0x80-0x8f. Within Broadcom we'll
-+ * take one for HNBU, and use "extensions" (a la FUNCE) within it.
-+ */
-+
-+#define	CISTPL_BRCM_HNBU	0x80
-+
-+/* Subtypes of BRCM_HNBU: */
-+
-+#define	HNBU_CHIPID		0x01		/* Six bytes with PCI vendor &
-+						 * device id and chiprev
-+						 */
-+#define	HNBU_BOARDREV		0x02		/* Two bytes board revision */
-+#define	HNBU_PAPARMS		0x03		/* Eleven bytes PA parameters */
-+#define	HNBU_OEM		0x04		/* Eight bytes OEM data */
-+#define	HNBU_CC			0x05		/* Default country code */
-+#define	HNBU_AA			0x06		/* Antennas available */
-+#define	HNBU_AG			0x07		/* Antenna gain */
-+#define HNBU_BOARDFLAGS		0x08		/* board flags */
-+#define HNBU_LED		0x09		/* LED set */
-+
-+#endif	/* _SBPCMCIA_H */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbsdram.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbsdram.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbsdram.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbsdram.h	2005-08-28 11:12:20.472852768 +0200
-@@ -0,0 +1,75 @@
-+/*
-+ * BCM47XX Sonics SiliconBackplane SDRAM controller core hardware definitions.
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation   
-+ * All Rights Reserved.   
-+ *    
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
-+ * $Id$
-+ */
-+
-+#ifndef	_SBSDRAM_H
-+#define	_SBSDRAM_H
-+
-+#ifndef _LANGUAGE_ASSEMBLY
-+
-+/* Sonics side: SDRAM core registers */
-+typedef volatile struct sbsdramregs {
-+	uint32	initcontrol;	/* Generates external SDRAM initialization sequence */
-+	uint32	config;		/* Initializes external SDRAM mode register */
-+	uint32	refresh;	/* Controls external SDRAM refresh rate */
-+	uint32	pad1;
-+	uint32	pad2;
-+} sbsdramregs_t;
-+
-+#endif
-+
-+/* SDRAM initialization control (initcontrol) register bits */
-+#define SDRAM_CBR	0x0001	/* Writing 1 generates refresh cycle and toggles bit */
-+#define SDRAM_PRE	0x0002	/* Writing 1 generates precharge cycle and toggles bit */
-+#define SDRAM_MRS	0x0004	/* Writing 1 generates mode register select cycle and toggles bit */
-+#define SDRAM_EN	0x0008	/* When set, enables access to SDRAM */
-+#define SDRAM_16Mb	0x0000	/* Use 16 Megabit SDRAM */
-+#define SDRAM_64Mb	0x0010	/* Use 64 Megabit SDRAM */
-+#define SDRAM_128Mb	0x0020	/* Use 128 Megabit SDRAM */
-+#define SDRAM_RSVMb	0x0030	/* Use special SDRAM */
-+#define SDRAM_RST	0x0080	/* Writing 1 causes soft reset of controller */
-+#define SDRAM_SELFREF	0x0100	/* Writing 1 enables self refresh mode */
-+#define SDRAM_PWRDOWN	0x0200	/* Writing 1 causes controller to power down */
-+#define SDRAM_32BIT	0x0400	/* When set, indicates 32 bit SDRAM interface */
-+#define SDRAM_9BITCOL	0x0800	/* When set, indicates 9 bit column */
-+
-+/* SDRAM configuration (config) register bits */
-+#define SDRAM_BURSTFULL	0x0000	/* Use full page bursts */
-+#define SDRAM_BURST8	0x0001	/* Use burst of 8 */
-+#define SDRAM_BURST4	0x0002	/* Use burst of 4 */
-+#define SDRAM_BURST2	0x0003	/* Use burst of 2 */
-+#define SDRAM_CAS3	0x0000	/* Use CAS latency of 3 */
-+#define SDRAM_CAS2	0x0004	/* Use CAS latency of 2 */
-+
-+/* SDRAM refresh control (refresh) register bits */
-+#define SDRAM_REF(p)	(((p)&0xff) | SDRAM_REF_EN)	/* Refresh period */
-+#define SDRAM_REF_EN	0x8000		/* Writing 1 enables periodic refresh */
-+
-+/* SDRAM Core default Init values (OCP ID 0x803) */
-+#define SDRAM_INIT	MEM4MX16X2
-+#define SDRAM_CONFIG    SDRAM_BURSTFULL
-+#define SDRAM_REFRESH   SDRAM_REF(0x40)
-+
-+#define MEM1MX16	0x009	/* 2 MB */
-+#define MEM1MX16X2	0x409	/* 4 MB */
-+#define MEM2MX8X2	0x809	/* 4 MB */
-+#define MEM2MX8X4	0xc09	/* 8 MB */
-+#define MEM2MX32	0x439	/* 8 MB */
-+#define MEM4MX16	0x019	/* 8 MB */
-+#define MEM4MX16X2	0x419	/* 16 MB */
-+#define MEM8MX8X2	0x819	/* 16 MB */
-+#define MEM8MX16	0x829	/* 16 MB */
-+#define MEM4MX32	0x429	/* 16 MB */
-+#define MEM8MX8X4	0xc19	/* 32 MB */
-+#define MEM8MX16X2	0xc29	/* 32 MB */
-+
-+#endif	/* _SBSDRAM_H */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbutils.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbutils.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/sbutils.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbutils.h	2005-08-28 11:12:20.473852616 +0200
-@@ -0,0 +1,90 @@
-+/*
-+ * Misc utility routines for accessing chip-specific features
-+ * of Broadcom HNBU SiliconBackplane-based chips.
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#ifndef	_sbutils_h_
-+#define	_sbutils_h_
-+
-+/* Board styles (bustype) */
-+#define	BOARDSTYLE_SOC		0		/* Silicon Backplane */
-+#define	BOARDSTYLE_PCI		1		/* PCI/MiniPCI board */
-+#define	BOARDSTYLE_PCMCIA	2		/* PCMCIA board */
-+#define	BOARDSTYLE_CARDBUS	3		/* Cardbus board */
-+
-+/*
-+ * Many of the routines below take an 'sbh' handle as their first arg.
-+ * Allocate this by calling sb_attach().  Free it by calling sb_detach().
-+ * At any one time, the sbh is logically focused on one particular sb core
-+ * (the "current core").
-+ * Use sb_setcore() or sb_setcoreidx() to change the association to another core.
-+ */
-+
-+/* exported externs */
-+extern void *sb_attach(uint pcidev, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz);
-+extern void *sb_kattach(void);
-+extern void sb_detach(void *sbh);
-+extern uint sb_chip(void *sbh);
-+extern uint sb_chiprev(void *sbh);
-+extern uint sb_chippkg(void *sbh);
-+extern uint sb_boardvendor(void *sbh);
-+extern uint sb_boardtype(void *sbh);
-+extern uint sb_boardstyle(void *sbh);
-+extern uint sb_bus(void *sbh);
-+extern uint sb_corelist(void *sbh, uint coreid[]);
-+extern uint sb_coreid(void *sbh);
-+extern uint sb_coreidx(void *sbh);
-+extern uint sb_coreunit(void *sbh);
-+extern uint sb_corevendor(void *sbh);
-+extern uint sb_corerev(void *sbh);
-+extern void *sb_coreregs(void *sbh);
-+extern uint32 sb_coreflags(void *sbh, uint32 mask, uint32 val);
-+extern uint32 sb_coreflagshi(void *sbh, uint32 mask, uint32 val);
-+extern bool sb_iscoreup(void *sbh);
-+extern void *sb_setcoreidx(void *sbh, uint coreidx);
-+extern void *sb_setcore(void *sbh, uint coreid, uint coreunit);
-+extern void sb_commit(void *sbh);
-+extern uint32 sb_base(uint32 admatch);
-+extern uint32 sb_size(uint32 admatch);
-+extern void sb_core_reset(void *sbh, uint32 bits);
-+extern void sb_core_tofixup(void *sbh);
-+extern void sb_core_disable(void *sbh, uint32 bits);
-+extern uint32 sb_clock_rate(uint32 pll_type, uint32 n, uint32 m);
-+extern uint32 sb_clock(void *sbh);
-+extern void sb_pci_setup(void *sbh, uint32 *dmaoffset, uint coremask);
-+extern void sb_pcmcia_init(void *sbh);
-+extern void sb_watchdog(void *sbh, uint ticks);
-+extern void *sb_gpiosetcore(void *sbh);
-+extern uint32 sb_gpiocontrol(void *sbh, uint32 mask, uint32 val);
-+extern uint32 sb_gpioouten(void *sbh, uint32 mask, uint32 val);
-+extern uint32 sb_gpioout(void *sbh, uint32 mask, uint32 val);
-+extern uint32 sb_gpioin(void *sbh);
-+extern uint32 sb_gpiointpolarity(void *sbh, uint32 mask, uint32 val);
-+extern uint32 sb_gpiointmask(void *sbh, uint32 mask, uint32 val);
-+extern bool sb_taclear(void *sbh);
-+extern void sb_pwrctl_init(void *sbh);
-+extern uint16 sb_pwrctl_fast_pwrup_delay(void *sbh);
-+extern bool sb_pwrctl_clk(void *sbh, uint mode);
-+extern int sb_pwrctl_xtal(void *sbh, uint what, bool on);
-+extern void sb_register_intr_callback(void *sbh, void *intrsoff_fn, void *intrsrestore_fn, void *intr_arg);
-+
-+/* pwrctl xtal what flags */
-+#define	XTAL		0x1			/* primary crystal oscillator (2050) */
-+#define	PLL		0x2			/* main chip pll */
-+
-+/* pwrctl clk mode */
-+#define	CLK_FAST	0			/* force fast (pll) clock */
-+#define	CLK_SLOW	1			/* force slow clock */
-+#define	CLK_DYNAMIC	2			/* enable dynamic power control */
-+
-+#endif	/* _sbutils_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sflash.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sflash.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/sflash.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sflash.h	2005-08-28 11:12:20.473852616 +0200
-@@ -0,0 +1,46 @@
-+/*
-+ * Broadcom SiliconBackplane chipcommon serial flash interface
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation   
-+ * All Rights Reserved.   
-+ *    
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
-+ *
-+ * $Id$
-+ */
-+
-+#ifndef _sflash_h_
-+#define _sflash_h_
-+
-+#include <typedefs.h>
-+#include <sbchipc.h>
-+
-+/* GPIO based bank selection (1 GPIO bit) */
-+#define SFLASH_MAX_BANKS	1
-+#define SFLASH_GPIO_SHIFT	2
-+#define SFLASH_GPIO_MASK	((SFLASH_MAX_BANKS - 1) << SFLASH_GPIO_SHIFT)
-+
-+struct sflash_bank {
-+	uint offset;					/* Byte offset */
-+	uint erasesize;					/* Block size */
-+	uint numblocks;					/* Number of blocks */
-+	uint size;					/* Total bank size in bytes */
-+};
-+
-+struct sflash {
-+	struct sflash_bank banks[SFLASH_MAX_BANKS];	/* GPIO selectable banks */
-+	uint32 type;					/* Type */
-+	uint size;					/* Total array size in bytes */
-+};
-+
-+/* Utility functions */
-+extern int sflash_poll(chipcregs_t *cc, uint offset);
-+extern int sflash_read(chipcregs_t *cc, uint offset, uint len, uchar *buf);
-+extern int sflash_write(chipcregs_t *cc, uint offset, uint len, const uchar *buf);
-+extern int sflash_erase(chipcregs_t *cc, uint offset);
-+extern struct sflash * sflash_init(chipcregs_t *cc);
-+
-+#endif /* _sflash_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/trxhdr.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/trxhdr.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/trxhdr.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/trxhdr.h	2005-08-28 11:12:20.474852464 +0200
-@@ -0,0 +1,31 @@
-+/*
-+ * TRX image file header format.
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */ 
-+
-+#include <typedefs.h>
-+
-+#define TRX_MAGIC	0x30524448	/* "HDR0" */
-+#define TRX_VERSION	1
-+#define TRX_MAX_LEN	0x3A0000
-+#define TRX_NO_HEADER	1		/* Do not write TRX header */	
-+
-+struct trx_header {
-+	uint32 magic;		/* "HDR0" */
-+	uint32 len;		/* Length of file including header */
-+	uint32 crc32;		/* 32-bit CRC from flag_version to end of file */
-+	uint32 flag_version;	/* 0:15 flags, 16:31 version */
-+	uint32 offsets[3];	/* Offsets of partitions from start of header */
-+};
-+
-+/* Compatibility */
-+typedef struct trx_header TRXHDR, *PTRXHDR;
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/typedefs.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/typedefs.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/typedefs.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/typedefs.h	2005-08-28 11:12:20.474852464 +0200
-@@ -0,0 +1,162 @@
-+/*
-+ * Copyright 2001-2003, Broadcom Corporation   
-+ * All Rights Reserved.   
-+ *    
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
-+ * $Id$
-+ */
-+
-+#ifndef _TYPEDEFS_H_
-+#define _TYPEDEFS_H_
-+
-+/*----------------------- define TRUE, FALSE, NULL, bool ----------------*/
-+#ifdef __cplusplus
-+
-+#ifndef FALSE
-+#define FALSE	false
-+#endif
-+#ifndef TRUE
-+#define TRUE	true
-+#endif
-+
-+#else /* !__cplusplus */
-+
-+#if defined(_WIN32)
-+
-+typedef	unsigned char	bool;
-+
-+#else
-+
-+#if defined(MACOSX) && defined(KERNEL)
-+#include <IOKit/IOTypes.h>
-+#else
-+typedef	int	bool;
-+#endif
-+
-+#endif
-+
-+#ifndef FALSE
-+#define FALSE	0
-+#endif
-+#ifndef TRUE
-+#define TRUE	1
-+
-+#ifndef NULL
-+#define	NULL 0
-+#endif
-+
-+#endif
-+
-+#endif /* __cplusplus */
-+
-+#ifndef OFF
-+#define	OFF	0
-+#endif
-+
-+#ifndef ON
-+#define	ON	1
-+#endif
-+
-+/*----------------------- define uchar, ushort, uint, ulong ----------------*/
-+
-+typedef unsigned char uchar;
-+
-+#if defined(_WIN32) || defined(PMON) || defined(__MRC__) || defined(V2_HAL) || defined(_CFE_)
-+
-+#ifndef V2_HAL
-+typedef unsigned short	ushort;
-+#endif
-+
-+typedef unsigned int	uint;
-+typedef unsigned long	ulong;
-+
-+#else
-+
-+/* pick up ushort & uint from standard types.h */
-+#if defined(linux) && defined(__KERNEL__)
-+#include <linux/types.h>	/* sys/types.h and linux/types.h are oil and water */
-+#else
-+#include <sys/types.h>	
-+#if !defined(TARGETENV_sun4) && !defined(linux)
-+typedef unsigned long	ulong;
-+#endif /* TARGETENV_sun4 */
-+#endif
-+#if defined(PMON)
-+typedef unsigned int	uint;
-+typedef unsigned long long       uint64;
-+#endif
-+
-+#endif /* WIN32 || PMON || .. */
-+
-+/*----------------------- define [u]int8/16/32/64 --------------------------*/
-+
-+
-+#ifdef V2_HAL
-+#include <bcmos.h>
-+#else
-+typedef signed char	int8;
-+typedef signed short	int16;
-+typedef signed int	int32;
-+
-+typedef unsigned char	uint8;
-+typedef unsigned short	uint16;
-+typedef unsigned int	uint32;
-+#endif	/* V2_HAL */
-+
-+typedef float		float32;
-+typedef double		float64;
-+
-+/*
-+ * abstracted floating point type allows for compile time selection of
-+ * single or double precision arithmetic.  Compiling with -DFLOAT32
-+ * selects single precision; the default is double precision.
-+ */
-+
-+#if defined(FLOAT32)
-+typedef float32 float_t;
-+#else /* default to double precision floating point */
-+typedef float64 float_t;
-+#endif /* FLOAT32 */
-+
-+#ifdef _MSC_VER	    /* Microsoft C */
-+typedef signed __int64	int64;
-+typedef unsigned __int64 uint64;
-+
-+#elif defined(__GNUC__) && !defined(__STRICT_ANSI__)
-+/* gcc understands signed/unsigned 64 bit types, but complains in ANSI mode */
-+typedef signed long long int64;
-+typedef unsigned long long uint64;
-+
-+#elif defined(__ICL) && !defined(__STDC__)
-+/* ICL accepts unsigned 64 bit type only, and complains in ANSI mode */
-+typedef unsigned long long uint64;
-+
-+#endif /* _MSC_VER */
-+
-+
-+/*----------------------- define PTRSZ, INLINE --------------------------*/
-+
-+#define	PTRSZ	sizeof (char*)
-+
-+#ifndef INLINE
-+
-+#ifdef _MSC_VER
-+
-+#define INLINE __inline
-+
-+#elif __GNUC__
-+
-+#define INLINE __inline__
-+
-+#else
-+
-+#define INLINE
-+
-+#endif /* _MSC_VER */
-+
-+#endif /* INLINE */
-+
-+#endif /* _TYPEDEFS_H_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/wlioctl.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/wlioctl.h
---- linux-2.6.12.5/arch/mips/bcm947xx/include/wlioctl.h	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/wlioctl.h	2005-08-28 11:12:20.475852312 +0200
-@@ -0,0 +1,690 @@
-+/*
-+ * Custom OID/ioctl definitions for
-+ * Broadcom 802.11abg Networking Device Driver
-+ *
-+ * Definitions subject to change without notice.
-+ *
-+ * Copyright 2001-2003, Broadcom Corporation
-+ * All Rights Reserved.
-+ * 
-+ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
-+ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
-+ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
-+ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
-+ *
-+ * $Id$
-+ */
-+
-+#ifndef _wlioctl_h_
-+#define	_wlioctl_h_
-+
-+#include <typedefs.h>
-+#include <proto/ethernet.h>
-+#include <proto/802.11.h>
-+
-+#if defined(__GNUC__)
-+#define	PACKED	__attribute__((packed))
-+#else
-+#define	PACKED
-+#endif
-+
-+/*
-+ * Per-bss information structure.
-+ */
-+
-+#define WL_NUMRATES		255	/* max # of rates in a rateset */
-+
-+typedef struct wl_rateset {
-+	uint32	count;			/* # rates in this set */
-+	uint8	rates[WL_NUMRATES];	/* rates in 500kbps units w/hi bit set if basic */
-+} wl_rateset_t;
-+
-+#define	WL_LEGACY_BSS_INFO_VERSION	106	/* an older supported version of wl_bss_info struct */
-+#define	WL_BSS_INFO_VERSION		107	/* current version of wl_bss_info struct */
-+
-+typedef struct wl_bss_info106 {
-+	uint		version;	/* version field */
-+	struct ether_addr BSSID;
-+	uint8		SSID_len;
-+	uint8		SSID[32];
-+	uint8		Privacy;	/* 0=No WEP, 1=Use WEP */
-+	int16		RSSI;		/* receive signal strength (in dBm) */
-+	uint16		beacon_period;	/* units are Kusec */
-+	uint16		atim_window;	/* units are Kusec */
-+	uint8		channel;	/* Channel no. */
-+	int8		infra;		/* 0=IBSS, 1=infrastructure, 2=unknown */
-+	struct {
-+		uint	count;		/* # rates in this set */
-+		uint8	rates[12];	/* rates in 500kbps units w/hi bit set if basic */
-+	} rateset;			/* supported rates */
-+        uint8           dtim_period;    /* DTIM period */
-+	int8		phy_noise;	/* noise right after tx (in dBm) */
-+	uint16		capability;	/* Capability information */
-+	struct dot11_bcn_prb *prb;	/* probe response frame (ioctl na) */
-+	uint16		prb_len;	/* probe response frame length (ioctl na) */
-+	struct {
-+		uint8 supported;	/* wpa supported */
-+		uint8 multicast;	/* multicast cipher */
-+		uint8 ucount;		/* count of unicast ciphers */
-+		uint8 unicast[4];	/* unicast ciphers */
-+		uint8 acount;		/* count of auth modes */
-+		uint8 auth[4];		/* Authentication modes */
-+	} wpa;
-+} wl_bss_info106_t;
-+
-+typedef struct wl_bss_info {
-+	uint32		version;	/* version field */
-+	uint32		length;		/* byte length of data in this record, starting at version and including IEs */
-+	struct ether_addr BSSID;
-+	uint16		beacon_period;	/* units are Kusec */
-+	uint16		capability;	/* Capability information */
-+	uint8		SSID_len;
-+	uint8		SSID[32];
-+	struct {
-+		uint	count;		/* # rates in this set */
-+		uint8	rates[16];	/* rates in 500kbps units w/hi bit set if basic */
-+	} rateset;			/* supported rates */
-+	uint8		channel;	/* Channel no. */
-+	uint16		atim_window;	/* units are Kusec */
-+        uint8           dtim_period;    /* DTIM period */
-+	int16		RSSI;		/* receive signal strength (in dBm) */
-+	int8		phy_noise;	/* noise (in dBm) */
-+	uint32		ie_length;	/* byte length of Information Elements */
-+	/* variable length Information Elements */
-+} wl_bss_info_t;
-+
-+typedef struct wl_scan_results {
-+	uint32 buflen;
-+	uint32 version;
-+	uint32 count;
-+	wl_bss_info_t bss_info[1];
-+} wl_scan_results_t;
-+/* size of wl_scan_results not including variable length array */
-+#define WL_SCAN_RESULTS_FIXED_SIZE 12
-+
-+/* uint32 list */
-+typedef struct wl_uint32_list {
-+	/* in - # of elements, out - # of entries */
-+	uint32 count;
-+	/* variable length uint32 list */
-+	uint32 element[1];
-+} wl_uint32_list_t;
-+
-+typedef struct wlc_ssid {
-+	uint32		SSID_len;
-+	uchar		SSID[32];
-+} wlc_ssid_t;
-+
-+#define WLC_CNTRY_BUF_SZ        4       /* Country string is 3 bytes + NULL */
-+
-+typedef struct wl_channels_in_country {
-+	uint32 buflen;
-+	uint32 band;
-+	char country_abbrev[WLC_CNTRY_BUF_SZ];
-+	uint32 count;
-+	uint32 channel[1];
-+} wl_channels_in_country_t;
-+
-+typedef struct wl_country_list {
-+	uint32 buflen;
-+	uint32 band_set;
-+	uint32 band;
-+	uint32 count;
-+	char country_abbrev[1];
-+} wl_country_list_t;
-+
-+
-+/*
-+* Maximum # of keys that wl driver supports in S/W. Keys supported 
-+* in H/W is less than or equal to WSEC_MAX_KEYS.
-+*/
-+#define WSEC_MAX_KEYS		54	/* Max # of keys (50 + 4 default keys) */
-+#define WSEC_MAX_DEFAULT_KEYS	4	/* # of default keys */
-+
-+/*
-+* Remove these two defines if access to crypto/tkhash.h 
-+* is unconditionally permitted.
-+*/
-+#define TKHASH_P1_KEY_SIZE	10	/* size of TKHash Phase1 output, in bytes */
-+#define TKHASH_P2_KEY_SIZE	16	/* size of TKHash Phase2 output */
-+
-+/* Enumerate crypto algorithms */
-+#define	CRYPTO_ALGO_OFF			0
-+#define	CRYPTO_ALGO_WEP1		1
-+#define	CRYPTO_ALGO_TKIP		2
-+#define	CRYPTO_ALGO_WEP128		3
-+#define CRYPTO_ALGO_AES_CCM		4
-+#define CRYPTO_ALGO_AES_OCB_MSDU	5
-+#define CRYPTO_ALGO_AES_OCB_MPDU	6
-+#define CRYPTO_ALGO_NALG		7
-+
-+/* For use with wlc_wep_key.flags */
-+#define WSEC_PRIMARY_KEY	(1 << 1)	/* Indicates this key is the primary (ie tx) key */
-+#define WSEC_TKIP_ERROR		(1 << 2)	/* Provoke deliberate MIC error */
-+#define WSEC_REPLAY_ERROR	(1 << 3)	/* Provoke deliberate replay */
-+
-+#define WSEC_GEN_MIC_ERROR	0x0001
-+#define WSEC_GEN_REPLAY		0x0002
-+
-+typedef struct tkip_info {
-+	uint16		phase1[TKHASH_P1_KEY_SIZE/sizeof(uint16)];	/* tkhash phase1 result */
-+	uint8		phase2[TKHASH_P2_KEY_SIZE];	/* tkhash phase2 result */
-+	uint32		micl;
-+	uint32		micr;
-+} tkip_info_t;
-+
-+typedef struct wsec_iv {
-+	uint32		hi;	/* upper 32 bits of IV */
-+	uint16		lo;	/* lower 16 bits of IV */
-+} wsec_iv_t;
-+
-+typedef struct wsec_key {
-+	uint32		index;		/* key index */
-+	uint32		len;		/* key length */
-+	uint8		data[DOT11_MAX_KEY_SIZE];	/* key data */
-+	tkip_info_t	tkip_tx;	/* tkip transmit state */
-+	tkip_info_t	tkip_rx;	/* tkip receive state */
-+	uint32		algo;		/* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
-+	uint32		flags;		/* misc flags */
-+	uint32 		algo_hw;	/* cache for hw register*/
-+	uint32 		aes_mode;	/* cache for hw register*/
-+	int		iv_len;		/* IV length */		
-+	int		iv_initialized;	/* has IV been initialized already? */		
-+	int		icv_len;	/* ICV length */
-+	wsec_iv_t	rxiv;		/* Rx IV */
-+	wsec_iv_t	txiv;		/* Tx IV */
-+	struct ether_addr ea;		/* per station */
-+} wsec_key_t;
-+
-+/* wireless security bitvec */
-+#define WEP_ENABLED		1
-+#define TKIP_ENABLED		2
-+#define AES_ENABLED		4
-+#define WSEC_SWFLAG		8
-+
-+#define WSEC_SW(wsec)		((wsec) & WSEC_SWFLAG)
-+#define WSEC_HW(wsec)		(!WSEC_SW(wsec))
-+#define WSEC_WEP_ENABLED(wsec)	((wsec) & WEP_ENABLED)
-+#define WSEC_TKIP_ENABLED(wsec)	((wsec) & TKIP_ENABLED)
-+#define WSEC_AES_ENABLED(wsec)	((wsec) & AES_ENABLED)
-+#define WSEC_ENABLED(wsec)	((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED))
-+
-+/* wireless authentication bit vector */
-+#define WPA_ENABLED	1
-+#define PSK_ENABLED	2
-+
-+#define WAUTH_WPA_ENABLED(wauth)	((wauth) & WPA_ENABLED)
-+#define WAUTH_PSK_ENABLED(wauth)	((wauth) & PSK_ENABLED)
-+#define WAUTH_ENABLED(wauth)		((wauth) & (WPA_ENABLED | PSK_ENABLED))
-+
-+/* group/mcast cipher */
-+#define WPA_MCAST_CIPHER(wsec)	(((wsec) & TKIP_ENABLED) ? WPA_CIPHER_TKIP : \
-+				((wsec) & AES_ENABLED) ? WPA_CIPHER_AES_CCM : \
-+				WPA_CIPHER_NONE)
-+
-+typedef struct wl_led_info {
-+	uint32		index;		/* led index */
-+	uint32		behavior;
-+	bool		activehi;
-+} wl_led_info_t;
-+
-+/*
-+ * definitions for driver messages passed from WL to NAS.
-+ */
-+/* Use this to recognize wpa and 802.1x driver messages. */
-+static const uint8 wl_wpa_snap_template[] =
-+	{ 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c };
-+
-+#define WL_WPA_MSG_IFNAME_MAX	16
-+
-+/* WPA driver message */
-+typedef struct wl_wpa_header {
-+	struct ether_header eth;
-+	struct dot11_llc_snap_header snap;
-+	uint8 version;
-+	uint8 type;
-+	/* version 2 additions */
-+	char ifname[WL_WPA_MSG_IFNAME_MAX];
-+	/* version specific data */
-+	/* uint8 data[1]; */
-+} wl_wpa_header_t PACKED;
-+
-+#define WL_WPA_HEADER_LEN	(ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX)
-+
-+/* WPA driver message ethertype - private between wlc and nas */
-+#define WL_WPA_ETHER_TYPE	0x9999
-+
-+/* WPA driver message current version */
-+#define WL_WPA_MSG_VERSION	2
-+
-+/* Type field values for the 802.2 driver messages for WPA. */
-+#define WLC_ASSOC_MSG		1
-+#define WLC_DISASSOC_MSG	2
-+#define WLC_PTK_MIC_MSG		3
-+#define WLC_GTK_MIC_MSG		4
-+
-+/* 802.1x driver message */
-+typedef struct wl_eapol_header {
-+	struct ether_header eth;
-+	struct dot11_llc_snap_header snap;
-+	uint8 version;
-+	uint8 reserved;
-+	char ifname[WL_WPA_MSG_IFNAME_MAX];
-+	/* version specific data */
-+	/* uint8 802_1x_msg[1]; */
-+} wl_eapol_header_t PACKED;
-+
-+#define WL_EAPOL_HEADER_LEN	(ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX)
-+
-+/* 802.1x driver message ethertype - private between wlc and nas */
-+#define WL_EAPOL_ETHER_TYPE	0x999A
-+
-+/* 802.1x driver message current version */
-+#define WL_EAPOL_MSG_VERSION	1
-+
-+/* srom read/write struct passed through ioctl */
-+typedef struct {
-+	uint   byteoff;		/* byte offset */
-+	uint   nbytes;		/* number of bytes */
-+	uint16 buf[1];
-+} srom_rw_t;
-+
-+/* R_REG and W_REG struct passed through ioctl */
-+typedef struct {
-+	uint32	byteoff;	/* byte offset of the field in d11regs_t */
-+	uint32	val;		/* read/write value of the field */
-+	uint32	size;		/* sizeof the field */
-+} rw_reg_t;
-+
-+/* Structure used by GET/SET_ATTEN ioctls */
-+typedef struct {
-+	uint16	auto_ctrl;	/* 1: Automatic control, 0: overriden */
-+	uint16	bb;		/* Baseband attenuation */
-+	uint16	radio;		/* Radio attenuation */
-+	uint16	txctl1;		/* Radio TX_CTL1 value */
-+} atten_t;
-+
-+/* Used to get specific STA parameters */ 
-+typedef struct {
-+	uint32	val;
-+	struct ether_addr ea;
-+} scb_val_t;
-+
-+/* callback registration data types */
-+
-+typedef struct _mac_event_params {
-+	uint msg;
-+	struct ether_addr *addr;
-+	uint result;
-+	uint status; 
-+	uint auth_type;
-+} mac_event_params_t;
-+
-+typedef struct _mic_error_params {
-+	struct ether_addr *ea;
-+	bool group;
-+	bool flush_txq;
-+} mic_error_params_t;
-+
-+typedef enum _wl_callback {
-+	WL_MAC_EVENT_CALLBACK = 0,
-+	WL_LINK_UP_CALLBACK,
-+	WL_LINK_DOWN_CALLBACK,
-+	WL_MIC_ERROR_CALLBACK,
-+	WL_LAST_CALLBACK
-+} wl_callback_t;
-+
-+typedef struct _callback {
-+	void (*fn)(void *, void *);
-+	void *context;
-+} callback_t;
-+
-+typedef struct _scan_callback {
-+	void (*fn)(void *);
-+	void *context;
-+} scan_callback_t;
-+
-+/* used to register an arbitrary callback via the IOCTL interface */
-+typedef struct _set_callback {
-+	int index;
-+	callback_t callback;
-+} set_callback_t;
-+
-+/*
-+ * Country locale determines which channels are available to us.
-+ */
-+typedef enum _wlc_locale {
-+	WLC_WW = 0,	/* Worldwide */
-+	WLC_THA,	/* Thailand */
-+	WLC_ISR,	/* Israel */
-+	WLC_JDN,	/* Jordan */
-+	WLC_PRC,	/* China */
-+	WLC_JPN,	/* Japan */
-+	WLC_FCC,	/* USA */
-+	WLC_EUR,	/* Europe */
-+	WLC_USL,	/* US Low Band only */
-+	WLC_JPH,	/* Japan High Band only */
-+	WLC_ALL,	/* All the channels in this band */
-+	WLC_11D,	/* Represents locale recieved by 11d beacons */
-+	WLC_LAST_LOCALE,
-+	WLC_UNDEFINED_LOCALE = 0xf
-+} wlc_locale_t;
-+
-+/* channel encoding */
-+typedef struct channel_info {
-+	int hw_channel;
-+	int target_channel;
-+	int scan_channel;
-+} channel_info_t;
-+
-+/* For ioctls that take a list of MAC addresses */
-+struct maclist {
-+	uint count;			/* number of MAC addresses */
-+	struct ether_addr ea[1];	/* variable length array of MAC addresses */
-+};
-+
-+/* get pkt count struct passed through ioctl */
-+typedef struct get_pktcnt {
-+	uint rx_good_pkt;
-+	uint rx_bad_pkt;
-+	uint tx_good_pkt;
-+	uint tx_bad_pkt;
-+} get_pktcnt_t;
-+
-+/* Linux network driver ioctl encoding */
-+typedef struct wl_ioctl {
-+	int cmd;	/* common ioctl definition */
-+	void *buf;	/* pointer to user buffer */
-+	int len;	/* length of user buffer */
-+} wl_ioctl_t;
-+
-+/* 
-+ * Structure for passing hardware and software 
-+ * revision info up from the driver. 
-+ */
-+typedef struct wlc_rev_info {
-+	uint		vendorid;	/* PCI vendor id */
-+	uint		deviceid;	/* device id of chip */
-+	uint		radiorev;	/* radio revision */
-+	uint		chiprev;	/* chip revision */
-+	uint		corerev;	/* core revision */
-+	uint		boardid;	/* board identifier (usu. PCI sub-device id) */
-+	uint		boardvendor;	/* board vendor (usu. PCI sub-vendor id) */
-+	uint		boardrev;	/* board revision */
-+	uint		driverrev;	/* driver version */
-+	uint		ucoderev;	/* microcode version */
-+	uint		bus;		/* bus type */
-+	uint        chipnum;    /* chip number */
-+} wlc_rev_info_t;
-+
-+/* check this magic number */
-+#define WLC_IOCTL_MAGIC		0x14e46c77
-+
-+/* bump this number if you change the ioctl interface */
-+#define WLC_IOCTL_VERSION	1
-+
-+/* maximum length buffer required */
-+#define WLC_IOCTL_MAXLEN	8192
-+
-+/* common ioctl definitions */
-+#define WLC_GET_MAGIC				0
-+#define WLC_GET_VERSION				1
-+#define WLC_UP					2
-+#define WLC_DOWN				3
-+#define WLC_DUMP				6
-+#define WLC_GET_MSGLEVEL			7
-+#define WLC_SET_MSGLEVEL			8
-+#define WLC_GET_PROMISC				9
-+#define WLC_SET_PROMISC				10
-+#define WLC_GET_RATE				12
-+#define WLC_SET_RATE				13
-+#define WLC_GET_INSTANCE			14
-+#define WLC_GET_FRAG				15
-+#define WLC_SET_FRAG				16
-+#define WLC_GET_RTS				17
-+#define WLC_SET_RTS				18
-+#define WLC_GET_INFRA				19
-+#define WLC_SET_INFRA				20
-+#define WLC_GET_AUTH				21
-+#define WLC_SET_AUTH				22
-+#define WLC_GET_BSSID				23
-+#define WLC_SET_BSSID				24
-+#define WLC_GET_SSID				25
-+#define WLC_SET_SSID				26
-+#define WLC_RESTART				27
-+#define WLC_GET_CHANNEL				29
-+#define WLC_SET_CHANNEL				30
-+#define WLC_GET_SRL				31
-+#define WLC_SET_SRL				32
-+#define WLC_GET_LRL				33
-+#define WLC_SET_LRL				34
-+#define WLC_GET_PLCPHDR				35
-+#define WLC_SET_PLCPHDR				36
-+#define WLC_GET_RADIO				37
-+#define WLC_SET_RADIO				38
-+#define WLC_GET_PHYTYPE				39
-+#define WLC_GET_WEP				42
-+#define WLC_SET_WEP				43
-+#define WLC_GET_KEY				44
-+#define WLC_SET_KEY				45
-+#define WLC_SCAN				50
-+#define WLC_SCAN_RESULTS			51
-+#define WLC_DISASSOC				52
-+#define WLC_REASSOC				53
-+#define WLC_GET_ROAM_TRIGGER			54
-+#define WLC_SET_ROAM_TRIGGER			55
-+#define WLC_GET_TXANT				61
-+#define WLC_SET_TXANT				62
-+#define WLC_GET_ANTDIV				63
-+#define WLC_SET_ANTDIV				64
-+#define WLC_GET_TXPWR				65
-+#define WLC_SET_TXPWR				66
-+#define WLC_GET_CLOSED				67
-+#define WLC_SET_CLOSED				68
-+#define WLC_GET_MACLIST				69
-+#define WLC_SET_MACLIST				70
-+#define WLC_GET_RATESET				71
-+#define WLC_SET_RATESET				72
-+#define WLC_GET_LOCALE				73
-+#define WLC_SET_LOCALE				74
-+#define WLC_GET_BCNPRD				75
-+#define WLC_SET_BCNPRD				76
-+#define WLC_GET_DTIMPRD				77
-+#define WLC_SET_DTIMPRD				78
-+#define WLC_GET_SROM				79
-+#define WLC_SET_SROM				80
-+#define WLC_GET_WEP_RESTRICT			81
-+#define WLC_SET_WEP_RESTRICT			82
-+#define WLC_GET_COUNTRY				83
-+#define WLC_SET_COUNTRY				84
-+#define WLC_GET_REVINFO				98
-+#define WLC_GET_MACMODE				105
-+#define WLC_SET_MACMODE				106
-+#define WLC_GET_GMODE				109
-+#define WLC_SET_GMODE				110
-+#define WLC_GET_CURR_RATESET			114	/* current rateset */
-+#define WLC_GET_SCANSUPPRESS			115
-+#define WLC_SET_SCANSUPPRESS			116
-+#define WLC_GET_AP				117
-+#define WLC_SET_AP				118
-+#define WLC_GET_EAP_RESTRICT			119
-+#define WLC_SET_EAP_RESTRICT			120
-+#define WLC_GET_WDSLIST				123
-+#define WLC_SET_WDSLIST				124
-+#define WLC_GET_RSSI				127
-+#define WLC_GET_WSEC				133
-+#define WLC_SET_WSEC				134
-+#define WLC_GET_BSS_INFO			136
-+#define WLC_GET_LAZYWDS				138
-+#define WLC_SET_LAZYWDS				139
-+#define WLC_GET_BANDLIST			140
-+#define WLC_GET_BAND				141
-+#define WLC_SET_BAND				142
-+#define WLC_GET_SHORTSLOT			144
-+#define WLC_GET_SHORTSLOT_OVERRIDE		145
-+#define WLC_SET_SHORTSLOT_OVERRIDE		146
-+#define WLC_GET_SHORTSLOT_RESTRICT		147
-+#define WLC_SET_SHORTSLOT_RESTRICT		148
-+#define WLC_GET_GMODE_PROTECTION		149
-+#define WLC_GET_GMODE_PROTECTION_OVERRIDE	150
-+#define WLC_SET_GMODE_PROTECTION_OVERRIDE	151
-+#define WLC_UPGRADE				152
-+#define WLC_GET_ASSOCLIST			159
-+#define WLC_GET_CLK				160
-+#define WLC_SET_CLK				161
-+#define WLC_GET_UP				162
-+#define WLC_OUT					163
-+#define WLC_GET_WPA_AUTH			164
-+#define WLC_SET_WPA_AUTH			165
-+#define WLC_GET_GMODE_PROTECTION_CONTROL	178
-+#define WLC_SET_GMODE_PROTECTION_CONTROL	179
-+#define WLC_GET_PHYLIST				180
-+#define WLC_GET_GMODE_PROTECTION_CTS		198
-+#define WLC_SET_GMODE_PROTECTION_CTS		199
-+#define WLC_GET_PIOMODE				203
-+#define WLC_SET_PIOMODE				204
-+#define WLC_SET_LED				209
-+#define WLC_GET_LED				210
-+#define WLC_GET_CHANNEL_SEL			215
-+#define WLC_START_CHANNEL_SEL			216
-+#define WLC_GET_VALID_CHANNELS			217
-+#define WLC_GET_FAKEFRAG			218
-+#define WLC_SET_FAKEFRAG			219
-+#define WLC_GET_WET				230
-+#define WLC_SET_WET				231
-+#define WLC_GET_KEY_PRIMARY			235
-+#define WLC_SET_KEY_PRIMARY			236
-+#define WLC_SCAN_WITH_CALLBACK			240
-+#define WLC_SET_CS_SCAN_TIMER			248
-+#define WLC_GET_CS_SCAN_TIMER			249
-+#define WLC_CURRENT_PWR				256
-+#define WLC_GET_CHANNELS_IN_COUNTRY		260
-+#define WLC_GET_COUNTRY_LIST			261
-+#define WLC_NVRAM_GET				264
-+#define WLC_NVRAM_SET				265
-+#define WLC_LAST				271	/* bump after adding */
-+
-+/*
-+ * Minor kludge alert:
-+ * Duplicate a few definitions that irelay requires from epiioctl.h here
-+ * so caller doesn't have to include this file and epiioctl.h .
-+ * If this grows any more, it would be time to move these irelay-specific
-+ * definitions out of the epiioctl.h and into a separate driver common file.
-+ */
-+#ifndef EPICTRL_COOKIE
-+#define EPICTRL_COOKIE		0xABADCEDE
-+#endif
-+
-+/* vx wlc ioctl's offset */
-+#define CMN_IOCTL_OFF 0x180
-+
-+/*
-+ * custom OID support
-+ *
-+ * 0xFF - implementation specific OID
-+ * 0xE4 - first byte of Broadcom PCI vendor ID
-+ * 0x14 - second byte of Broadcom PCI vendor ID
-+ * 0xXX - the custom OID number
-+ */
-+
-+/* begin 0x1f values beyond the start of the ET driver range. */
-+#define WL_OID_BASE		0xFFE41420
-+
-+/* NDIS overrides */
-+#define OID_WL_GETINSTANCE	(WL_OID_BASE + WLC_GET_INSTANCE)
-+
-+#define WL_DECRYPT_STATUS_SUCCESS	1
-+#define WL_DECRYPT_STATUS_FAILURE	2
-+#define WL_DECRYPT_STATUS_UNKNOWN	3
-+
-+/* allows user-mode app to poll the status of USB image upgrade */
-+#define WLC_UPGRADE_SUCCESS			0
-+#define WLC_UPGRADE_PENDING			1
++	/* pll delay registers (corerev >= 4) */
++	uint32	pll_on_delay;		/* 0xb0 */
++	uint32	fref_sel_delay;
++	uint32	slow_clk_ctl;
++	uint32	PAD[17];
 +
-+/* Bit masks for radio disabled status - returned by WL_GET_RADIO */
-+#define WL_RADIO_SW_DISABLE	(1<<0)
-+#define WL_RADIO_HW_DISABLE	(1<<1)
++	/* ExtBus control registers (corerev >= 3) */
++	uint32	cs01config;		/* 0x100 */
++	uint32	cs01memwaitcnt;
++	uint32	cs01attrwaitcnt;
++	uint32	cs01iowaitcnt;
++	uint32	cs23config;
++	uint32	cs23memwaitcnt;
++	uint32	cs23attrwaitcnt;
++	uint32	cs23iowaitcnt;
++	uint32	cs4config;
++	uint32	cs4waitcnt;
++	uint32	parallelflashconfig;
++	uint32	parallelflashwaitcnt;
++	uint32	PAD[116];
 +
-+/* Override bit for WLC_SET_TXPWR.  if set, ignore other level limits */
-+#define WL_TXPWR_OVERRIDE	(1<<31)
++	/* uarts */
++	uint8	uart0data;		/* 0x300 */
++	uint8	uart0imr;
++	uint8	uart0fcr;
++	uint8	uart0lcr;
++	uint8	uart0mcr;
++	uint8	uart0lsr;
++	uint8	uart0msr;
++	uint8	uart0scratch;
++	uint8	PAD[248];		/* corerev >= 1 */
 +
++	uint8	uart1data;		/* 0x400 */
++	uint8	uart1imr;
++	uint8	uart1fcr;
++	uint8	uart1lcr;
++	uint8	uart1mcr;
++	uint8	uart1lsr;
++	uint8	uart1msr;
++	uint8	uart1scratch;
++} chipcregs_t;
 +
-+/* Bus types */
-+#define WL_SB_BUS	0	/* Silicon Backplane */
-+#define WL_PCI_BUS	1	/* PCI target */
-+#define WL_PCMCIA_BUS	2	/* PCMCIA target */
++/* chipid */
++#define	CID_ID_MASK		0x0000ffff		/* Chip Id mask */
++#define	CID_REV_MASK		0x000f0000		/* Chip Revision mask */
++#define	CID_REV_SHIFT		16			/* Chip Revision shift */
++#define	CID_PKG_MASK		0x00f00000		/* Package Option mask */
++#define	CID_PKG_SHIFT		20			/* Package Option shift */
++#define	CID_CC_MASK		0x0f000000		/* CoreCount (corerev >= 4) */
++#define CID_CC_SHIFT		24
 +
-+/* band types */
-+#define	WLC_BAND_AUTO		0	/* auto-select */
-+#define	WLC_BAND_A		1	/* "a" band (5   Ghz) */
-+#define	WLC_BAND_B		2	/* "b" band (2.4 Ghz) */
++/* capabilities */
++#define	CAP_UARTS_MASK		0x00000003		/* Number of uarts */
++#define CAP_MIPSEB		0x00000004		/* MIPS is in big-endian mode */
++#define CAP_UCLKSEL		0x00000018		/* UARTs clock select */
++#define CAP_UINTCLK		0x00000008		/* UARTs are driven by internal divided clock */
++#define CAP_UARTGPIO		0x00000020		/* UARTs own Gpio's 15:12 */
++#define CAP_EXTBUS		0x00000040		/* External bus present */
++#define	CAP_FLASH_MASK		0x00000700		/* Type of flash */
++#define	CAP_PLL_MASK		0x00038000		/* Type of PLL */
++#define CAP_PWR_CTL		0x00040000		/* Power control */
 +
-+/* MAC list modes */
-+#define WLC_MACMODE_DISABLED	0	/* MAC list disabled */
-+#define WLC_MACMODE_DENY	1	/* Deny specified (i.e. allow unspecified) */
-+#define WLC_MACMODE_ALLOW	2	/* Allow specified (i.e. deny unspecified) */	
++/* PLL type */
++#define PLL_NONE		0x00000000
++#define PLL_TYPE1		0x00010000		/* 48Mhz base, 3 dividers */
++#define PLL_TYPE2		0x00020000		/* 48Mhz, 4 dividers */
++#define PLL_TYPE3		0x00030000		/* 25Mhz, 2 dividers */
++#define PLL_TYPE4		0x00008000		/* 48Mhz, 4 dividers */
 +
-+/* 
-+ *
-+ */
-+#define GMODE_LEGACY_B		0
-+#define GMODE_AUTO		1
-+#define GMODE_ONLY		2
-+#define GMODE_B_DEFERRED	3
-+#define GMODE_PERFORMANCE	4
-+#define GMODE_LRS		5
-+#define GMODE_MAX		6
++/* corecontrol */
++#define CC_UARTCLKO		0x00000001		/* Drive UART with internal clock */
++#define	CC_SE			0x00000002		/* sync clk out enable (corerev >= 3) */
 +
-+/* values for PLCPHdr_override */
-+#define WLC_PLCP_AUTO	-1
-+#define WLC_PLCP_SHORT	0
-+#define WLC_PLCP_LONG	1
++/* intstatus/intmask */
++#define	CI_EI			0x00000002		/* ro: ext intr pin (corerev >= 3) */
 +
-+/* values for g_protection_override */
-+#define WLC_G_PROTECTION_AUTO	-1
-+#define WLC_G_PROTECTION_OFF	0
-+#define WLC_G_PROTECTION_ON	1
++/* slow_clk_ctl */
++#define SCC_SS_MASK		0x00000007		/* slow clock source mask */
++#define	SCC_SS_LPO		0x00000000		/* source of slow clock is LPO */
++#define	SCC_SS_XTAL		0x00000001		/* source of slow clock is crystal */
++#define	SCC_SS_PCI		0x00000002		/* source of slow clock is PCI */
++#define SCC_LF			0x00000200		/* LPOFreqSel, 1: 160Khz, 0: 32KHz */
++#define SCC_LP			0x00000400		/* LPOPowerDown, 1: LPO is disabled, 0: LPO is enabled */
++#define SCC_FS			0x00000800		/* ForceSlowClk, 1: sb/cores running on slow clock, 0: power logic control */
++#define SCC_IP			0x00001000		/* IgnorePllOffReq, 1/0: power logic ignores/honors PLL clock disable requests from core */
++#define SCC_XC			0x00002000		/* XtalControlEn, 1/0: power logic does/doesn't disable crystal when appropriate */
++#define SCC_XP			0x00004000		/* XtalPU (RO), 1/0: crystal running/disabled */
++#define SCC_CD_MASK		0xffff0000		/* ClockDivider mask, SlowClk = 1/(4+divisor) * crystal/PCI clock */
++#define SCC_CD_SHF		16			/* CLockDivider shift */
 +
-+/* values for g_protection_control */
-+#define WLC_G_PROTECTION_CTL_OFF	0
-+#define WLC_G_PROTECTION_CTL_LOCAL	1
-+#define WLC_G_PROTECTION_CTL_OVERLAP	2
++/* clockcontrol_n */
++#define	CN_N1_MASK		0x3f			/* n1 control */
++#define	CN_N2_MASK		0x3f00			/* n2 control */
++#define	CN_N2_SHIFT		8
++
++/* clockcontrol_sb/pci/uart */
++#define	CC_M1_MASK		0x3f			/* m1 control */
++#define	CC_M2_MASK		0x3f00			/* m2 control */
++#define	CC_M2_SHIFT		8
++#define	CC_M3_MASK		0x3f0000		/* m3 control */
++#define	CC_M3_SHIFT		16
++#define	CC_MC_MASK		0x1f000000		/* mux control */
++#define	CC_MC_SHIFT		24
 +
++/* N3M Clock control values for 125Mhz */
++#define	CC_125_N		0x0802			/* Default values for bcm4310 */
++#define	CC_125_M		0x04020009
++#define	CC_125_M25		0x11090009
++#define	CC_125_M33		0x11090005
 +
++/* N3M Clock control magic field values */
++#define	CC_F6_2			0x02			/* A factor of 2 in */
++#define	CC_F6_3			0x03			/* 6-bit fields like */
++#define	CC_F6_4			0x05			/* N1, M1 or M3 */
++#define	CC_F6_5			0x09
++#define	CC_F6_6			0x11
++#define	CC_F6_7			0x21
 +
++#define	CC_F5_BIAS		5			/* 5-bit fields get this added */
 +
++#define	CC_MC_BYPASS		0x08
++#define	CC_MC_M1		0x04
++#define	CC_MC_M1M2		0x02
++#define	CC_MC_M1M2M3		0x01
++#define	CC_MC_M1M3		0x11
 +
++/* Type 2 Clock control magic field values */
++#define	CC_T2_BIAS		2			/* n1, n2, m1 & m3 bias */
++#define	CC_T2M2_BIAS		3			/* m2 bias */
 +
-+/* max # of leds supported by GPIO (gpio pin# == led index#) */
-+#define	WL_LED_NUMGPIO		16	/* gpio 0-15 */
++#define	CC_T2MC_M1BYP		1
++#define	CC_T2MC_M2BYP		2
++#define	CC_T2MC_M3BYP		4
 +
-+/* led per-pin behaviors */
-+#define	WL_LED_OFF		0		/* always off */
-+#define	WL_LED_ON		1		/* always on */
-+#define	WL_LED_ACTIVITY		2		/* activity */
-+#define	WL_LED_RADIO		3		/* radio enabled */
-+#define	WL_LED_ARADIO		4		/* 5  Ghz radio enabled */
-+#define	WL_LED_BRADIO		5		/* 2.4Ghz radio enabled */
-+#define	WL_LED_BGMODE		6		/* on if gmode, off if bmode */
-+#define	WL_LED_WI1		7		
-+#define	WL_LED_WI2		8		
-+#define	WL_LED_WI3		9		
-+#define	WL_LED_ASSOC		10		/* associated state indicator */
-+#define	WL_LED_INACTIVE		11		/* null behavior (clears default behavior) */
-+#define	WL_LED_NUMBEHAVIOR	12
++/* Common clock base */
++#define	CC_CLOCK_BASE		24000000		/* Half the clock freq */
 +
-+/* led behavior numeric value format */
-+#define	WL_LED_BEH_MASK		0x7f		/* behavior mask */
-+#define	WL_LED_AL_MASK		0x80		/* activelow (polarity) bit */
++/* Flash types in the chipcommon capabilities register */
++#define FLASH_NONE		0x000		/* No flash */
++#define SFLASH_ST		0x100		/* ST serial flash */
++#define SFLASH_AT		0x200		/* Atmel serial flash */
++#define	PFLASH			0x700		/* Parallel flash */
 +
++/* Bits in the config registers */
++#define	CC_CFG_EN		0x0001		/* Enable */
++#define	CC_CFG_EM_MASK		0x000e		/* Extif Mode */
++#define	CC_CFG_EM_ASYNC		0x0002		/*   Async/Parallel flash */
++#define	CC_CFG_EM_SYNC		0x0004		/*   Synchronous */
++#define	CC_CFG_EM_PCMCIA	0x0008		/*   PCMCIA */
++#define	CC_CFG_EM_IDE		0x000a		/*   IDE */
++#define	CC_CFG_DS		0x0010		/* Data size, 0=8bit, 1=16bit */
++#define	CC_CFG_CD_MASK		0x0060		/* Sync: Clock divisor */
++#define	CC_CFG_CE		0x0080		/* Sync: Clock enable */
++#define	CC_CFG_SB		0x0100		/* Sync: Size/Bytestrobe */
 +
-+/* rate check */
-+#define WL_RATE_OFDM(r)		(((r) & 0x7f) == 12 || ((r) & 0x7f) == 18 || \
-+				 ((r) & 0x7f) == 24 || ((r) & 0x7f) == 36 || \
-+				 ((r) & 0x7f) == 48 || ((r) & 0x7f) == 72 || \
-+				 ((r) & 0x7f) == 96 || ((r) & 0x7f) == 108)
++/* Start/busy bit in flashcontrol */
++#define SFLASH_START		0x80000000
++#define SFLASH_BUSY		SFLASH_START
 +
++/* flashcontrol opcodes for ST flashes */
++#define SFLASH_ST_WREN		0x0006		/* Write Enable */
++#define SFLASH_ST_WRDIS		0x0004		/* Write Disable */
++#define SFLASH_ST_RDSR		0x0105		/* Read Status Register */
++#define SFLASH_ST_WRSR		0x0101		/* Write Status Register */
++#define SFLASH_ST_READ		0x0303		/* Read Data Bytes */
++#define SFLASH_ST_PP		0x0302		/* Page Program */
++#define SFLASH_ST_SE		0x02d8		/* Sector Erase */
++#define SFLASH_ST_BE		0x00c7		/* Bulk Erase */
++#define SFLASH_ST_DP		0x00b9		/* Deep Power-down */
++#define SFLASH_ST_RES		0x03ab		/* Read Electronic Signature */
 +
-+#undef PACKED
++/* Status register bits for ST flashes */
++#define SFLASH_ST_WIP		0x01		/* Write In Progress */
++#define SFLASH_ST_WEL		0x02		/* Write Enable Latch */
++#define SFLASH_ST_BP_MASK	0x1c		/* Block Protect */
++#define SFLASH_ST_BP_SHIFT	2
++#define SFLASH_ST_SRWD		0x80		/* Status Register Write Disable */
 +
-+#endif /* _wlioctl_h_ */
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/int-handler.S linux-2.6.12.5-brcm/arch/mips/bcm947xx/int-handler.S
---- linux-2.6.12.5/arch/mips/bcm947xx/int-handler.S	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/int-handler.S	2005-08-28 16:58:08.027788792 +0200
-@@ -0,0 +1,48 @@
-+/*
-+ *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++/* flashcontrol opcodes for Atmel flashes */
++#define SFLASH_AT_READ				0x07e8
++#define SFLASH_AT_PAGE_READ			0x07d2
++#define SFLASH_AT_BUF1_READ
++#define SFLASH_AT_BUF2_READ
++#define SFLASH_AT_STATUS			0x01d7
++#define SFLASH_AT_BUF1_WRITE			0x0384
++#define SFLASH_AT_BUF2_WRITE			0x0387
++#define SFLASH_AT_BUF1_ERASE_PROGRAM		0x0283
++#define SFLASH_AT_BUF2_ERASE_PROGRAM		0x0286
++#define SFLASH_AT_BUF1_PROGRAM			0x0288
++#define SFLASH_AT_BUF2_PROGRAM			0x0289
++#define SFLASH_AT_PAGE_ERASE			0x0281
++#define SFLASH_AT_BLOCK_ERASE			0x0250
++#define SFLASH_AT_BUF1_WRITE_ERASE_PROGRAM	0x0382
++#define SFLASH_AT_BUF2_WRITE_ERASE_PROGRAM	0x0385
++#define SFLASH_AT_BUF1_LOAD			0x0253
++#define SFLASH_AT_BUF2_LOAD			0x0255
++#define SFLASH_AT_BUF1_COMPARE			0x0260
++#define SFLASH_AT_BUF2_COMPARE			0x0261
++#define SFLASH_AT_BUF1_REPROGRAM		0x0258
++#define SFLASH_AT_BUF2_REPROGRAM		0x0259
++
++/* Status register bits for Atmel flashes */
++#define SFLASH_AT_READY				0x80
++#define SFLASH_AT_MISMATCH			0x40
++#define SFLASH_AT_ID_MASK			0x38
++#define SFLASH_AT_ID_SHIFT			3
++
++#endif	/* _SBCHIPC_H */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbconfig.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbconfig.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/sbconfig.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbconfig.h	2005-09-16 10:29:18.207586928 +0200
+@@ -0,0 +1,296 @@
++/*
++ * Broadcom SiliconBackplane hardware register definitions.
 + *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
++ * Copyright 2001-2003, Broadcom Corporation   
++ * All Rights Reserved.   
++ *    
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
++ * $Id$
 + */
 +
-+#include <asm/asm.h>
-+#include <asm/mipsregs.h>
-+#include <asm/regdef.h>
-+#include <asm/stackframe.h>
++#ifndef	_SBCONFIG_H
++#define	_SBCONFIG_H
 +
-+	.text
-+	.set	noreorder
-+	.set	noat
-+	.align	5
++/* cpp contortions to concatenate w/arg prescan */
++#ifndef PAD
++#define	_PADLINE(line)	pad ## line
++#define	_XSTR(line)	_PADLINE(line)
++#define	PAD		_XSTR(__LINE__)
++#endif
 +
-+	NESTED(bcm47xx_irq_handler, PT_SIZE, sp)
-+	SAVE_ALL
-+	CLI
++/*
++ * SiliconBackplane Address Map.
++ * All regions may not exist on all chips.
++ */
++#define SB_SDRAM_BASE		0x00000000	/* Physical SDRAM */
++#define SB_PCI_MEM		0x08000000	/* Host Mode PCI memory access space (64 MB) */
++#define SB_PCI_CFG		0x0c000000	/* Host Mode PCI configuration space (64 MB) */
++#define	SB_SDRAM_SWAPPED	0x10000000	/* Byteswapped Physical SDRAM */
++#define SB_ENUM_BASE    	0x18000000	/* Enumeration space base */
++#define	SB_ENUM_LIM		0x18010000	/* Enumeration space limit */
++#define	SB_EXTIF_BASE		0x1f000000	/* External Interface region base address */
++#define SB_PCI_DMA		0x40000000	/* Client Mode PCI memory access space (1 GB) */
++#define	SB_EUART		(SB_EXTIF_BASE + 0x00800000)
++#define	SB_LED			(SB_EXTIF_BASE + 0x00900000)
 +
-+	.set	at
-+	.set    noreorder
++/* enumeration space related defs */
++#define SB_CORE_SIZE    	0x1000		/* each core gets 4Kbytes for registers */
++#define	SB_MAXCORES		((SB_ENUM_LIM - SB_ENUM_BASE)/SB_CORE_SIZE)
++#define	SBCONFIGOFF		0xf00		/* core sbconfig regs are top 256bytes of regs */
++#define	SBCONFIGSIZE		256		/* sizeof (sbconfig_t) */
 +
-+	jal	bcm47xx_irq_dispatch
-+	move	a0, sp
++/* mips address */
++#define	SB_EJTAG		0xff200000	/* MIPS EJTAG space (2M) */
 +
-+	j	ret_from_irq
-+	nop
-+		
-+	END(bcm47xx_irq_handler)
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/irq.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/irq.c
---- linux-2.6.12.5/arch/mips/bcm947xx/irq.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/irq.c	2005-08-28 16:58:26.178029536 +0200
-@@ -0,0 +1,68 @@
 +/*
-+ *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
++ * Sonics Configuration Space Registers.
 + */
++#ifdef _LANGUAGE_ASSEMBLY
 +
-+#include <linux/config.h>
-+#include <linux/errno.h>
-+#include <linux/init.h>
-+#include <linux/interrupt.h>
-+#include <linux/irq.h>
-+#include <linux/module.h>
-+#include <linux/smp.h>
-+#include <linux/types.h>
++#define SBIPSFLAG		0x08
++#define SBTPSFLAG		0x18
++#define	SBTMERRLOGA		0x48		/* sonics >= 2.3 */
++#define	SBTMERRLOG		0x50		/* sonics >= 2.3 */
++#define SBADMATCH3		0x60
++#define SBADMATCH2		0x68
++#define SBADMATCH1		0x70
++#define SBIMSTATE		0x90
++#define SBINTVEC		0x94
++#define SBTMSTATELOW		0x98
++#define SBTMSTATEHIGH		0x9c
++#define SBBWA0			0xa0
++#define SBIMCONFIGLOW		0xa8
++#define SBIMCONFIGHIGH		0xac
++#define SBADMATCH0		0xb0
++#define SBTMCONFIGLOW		0xb8
++#define SBTMCONFIGHIGH		0xbc
++#define SBBCONFIG		0xc0
++#define SBBSTATE		0xc8
++#define SBACTCNFG		0xd8
++#define	SBFLAGST		0xe8
++#define SBIDLOW			0xf8
++#define SBIDHIGH		0xfc
 +
-+#include <asm/cpu.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
-+#include <asm/irq_cpu.h>
-+#include <asm/gdb-stub.h>
 +
-+extern asmlinkage void bcm47xx_irq_handler(void);
++#else
 +
-+void bcm47xx_irq_dispatch(struct pt_regs *regs)
-+{
-+	u32 cause;
++typedef volatile struct _sbconfig {
++	uint32	PAD[2];
++	uint32	sbipsflag;		/* initiator port ocp slave flag */
++	uint32	PAD[3];
++	uint32	sbtpsflag;		/* target port ocp slave flag */
++	uint32	PAD[11];
++	uint32	sbtmerrloga;		/* (sonics >= 2.3) */
++	uint32	PAD;
++	uint32	sbtmerrlog;		/* (sonics >= 2.3) */
++	uint32	PAD[3];
++	uint32	sbadmatch3;		/* address match3 */
++	uint32	PAD;
++	uint32	sbadmatch2;		/* address match2 */
++	uint32	PAD;
++	uint32	sbadmatch1;		/* address match1 */
++	uint32	PAD[7];
++	uint32	sbimstate;		/* initiator agent state */
++	uint32	sbintvec;		/* interrupt mask */
++	uint32	sbtmstatelow;		/* target state */
++	uint32	sbtmstatehigh;		/* target state */
++	uint32	sbbwa0;			/* bandwidth allocation table0 */
++	uint32	PAD;
++	uint32	sbimconfiglow;		/* initiator configuration */
++	uint32	sbimconfighigh;		/* initiator configuration */
++	uint32	sbadmatch0;		/* address match0 */
++	uint32	PAD;
++	uint32	sbtmconfiglow;		/* target configuration */
++	uint32	sbtmconfighigh;		/* target configuration */
++	uint32	sbbconfig;		/* broadcast configuration */
++	uint32	PAD;
++	uint32	sbbstate;		/* broadcast state */
++	uint32	PAD[3];
++	uint32	sbactcnfg;		/* activate configuration */
++	uint32	PAD[3];
++	uint32	sbflagst;		/* current sbflags */
++	uint32	PAD[3];
++	uint32	sbidlow;		/* identification */
++	uint32	sbidhigh;		/* identification */
++} sbconfig_t;
 +
-+	cause = read_c0_cause() & read_c0_status() & CAUSEF_IP;
++#endif /* _LANGUAGE_ASSEMBLY */
 +
-+	clear_c0_status(cause);
++/* sbipsflag */
++#define	SBIPS_INT1_MASK		0x3f		/* which sbflags get routed to mips interrupt 1 */
++#define	SBIPS_INT1_SHIFT	0
++#define	SBIPS_INT2_MASK		0x3f00		/* which sbflags get routed to mips interrupt 2 */
++#define	SBIPS_INT2_SHIFT	8
++#define	SBIPS_INT3_MASK		0x3f0000	/* which sbflags get routed to mips interrupt 3 */
++#define	SBIPS_INT3_SHIFT	16
++#define	SBIPS_INT4_MASK		0x3f000000	/* which sbflags get routed to mips interrupt 4 */
++#define	SBIPS_INT4_SHIFT	24
 +
-+	if (cause & CAUSEF_IP7)
-+		do_IRQ(7, regs);
-+	if (cause & CAUSEF_IP2)
-+		do_IRQ(2, regs);
-+	if (cause & CAUSEF_IP3)
-+		do_IRQ(3, regs);
-+	if (cause & CAUSEF_IP4)
-+		do_IRQ(4, regs);
-+	if (cause & CAUSEF_IP5)
-+		do_IRQ(5, regs);
-+	if (cause & CAUSEF_IP6)
-+		do_IRQ(6, regs);
-+}
++/* sbtpsflag */
++#define	SBTPS_NUM0_MASK		0x3f		/* interrupt sbFlag # generated by this core */
++#define	SBTPS_F0EN0		0x40		/* interrupt is always sent on the backplane */
 +
-+void __init arch_init_irq(void)
-+{
-+	set_except_vector(0, bcm47xx_irq_handler);
-+	mips_cpu_irq_init(0);
-+}
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/prom.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/prom.c
---- linux-2.6.12.5/arch/mips/bcm947xx/prom.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/prom.c	2005-08-28 16:58:41.789656208 +0200
-@@ -0,0 +1,59 @@
-+/*
-+ *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
++/* sbtmerrlog */
++#define	SBTMEL_CM		0x00000007	/* command */
++#define	SBTMEL_CI		0x0000ff00	/* connection id */
++#define	SBTMEL_EC		0x0f000000	/* error code */
++#define	SBTMEL_ME		0x80000000	/* multiple error */
++
++/* sbimstate */
++#define	SBIM_PC			0xf		/* pipecount */
++#define	SBIM_AP_MASK		0x30		/* arbitration policy */
++#define	SBIM_AP_BOTH		0x00		/* use both timeslaces and token */
++#define	SBIM_AP_TS		0x10		/* use timesliaces only */
++#define	SBIM_AP_TK		0x20		/* use token only */
++#define	SBIM_AP_RSV		0x30		/* reserved */
++#define	SBIM_IBE		0x20000		/* inbanderror */
++#define	SBIM_TO			0x40000		/* timeout */
++#define	SBIM_BY			0x01800000	/* busy (sonics >= 2.3) */
++#define	SBIM_RJ			0x02000000	/* reject (sonics >= 2.3) */
 +
-+#include <linux/init.h>
-+#include <linux/mm.h>
-+#include <linux/sched.h>
-+#include <linux/bootmem.h>
++/* sbtmstatelow */
++#define	SBTML_RESET		0x1		/* reset */
++#define	SBTML_REJ		0x2		/* reject */
++#define	SBTML_CLK		0x10000		/* clock enable */
++#define	SBTML_FGC		0x20000		/* force gated clocks on */
++#define	SBTML_FL_MASK		0x3ffc0000	/* core-specific flags */
++#define	SBTML_PE		0x40000000	/* pme enable */
++#define	SBTML_BE		0x80000000	/* bist enable */
 +
-+#include <asm/addrspace.h>
-+#include <asm/bootinfo.h>
-+#include <asm/pmon.h>
++/* sbtmstatehigh */
++#define	SBTMH_SERR		0x1		/* serror */
++#define	SBTMH_INT		0x2		/* interrupt */
++#define	SBTMH_BUSY		0x4		/* busy */
++#define	SBTMH_TO		0x00000020	/* timeout (sonics >= 2.3) */
++#define	SBTMH_FL_MASK		0x1fff0000	/* core-specific flags */
++#define	SBTMH_GCR		0x20000000	/* gated clock request */
++#define	SBTMH_BISTF		0x40000000	/* bist failed */
++#define	SBTMH_BISTD		0x80000000	/* bist done */
 +
-+const char *get_system_type(void)
-+{
-+	return "Broadcom BCM47xx";
-+}
++/* sbbwa0 */
++#define	SBBWA_TAB0_MASK		0xffff		/* lookup table 0 */
++#define	SBBWA_TAB1_MASK		0xffff		/* lookup table 1 */
++#define	SBBWA_TAB1_SHIFT	16
 +
-+void __init prom_init(void)
-+{
-+	unsigned long mem;
++/* sbimconfiglow */
++#define	SBIMCL_STO_MASK		0x7		/* service timeout */
++#define	SBIMCL_RTO_MASK		0x70		/* request timeout */
++#define	SBIMCL_RTO_SHIFT	4
++#define	SBIMCL_CID_MASK		0xff0000	/* connection id */
++#define	SBIMCL_CID_SHIFT	16
 +
-+        mips_machgroup = MACH_GROUP_BRCM;
-+        mips_machtype = MACH_BCM47XX;
++/* sbimconfighigh */
++#define	SBIMCH_IEM_MASK		0xc		/* inband error mode */
++#define	SBIMCH_TEM_MASK		0x30		/* timeout error mode */
++#define	SBIMCH_TEM_SHIFT	4
++#define	SBIMCH_BEM_MASK		0xc0		/* bus error mode */
++#define	SBIMCH_BEM_SHIFT	6
 +
-+	/* Figure out memory size by finding aliases */
-+	for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) {
-+		if (*(unsigned long *)((unsigned long)(prom_init) + mem) == 
-+		    *(unsigned long *)(prom_init))
-+			break;
-+	}
++/* sbadmatch0 */
++#define	SBAM_TYPE_MASK		0x3		/* address type */
++#define	SBAM_AD64		0x4		/* reserved */
++#define	SBAM_ADINT0_MASK	0xf8		/* type0 size */
++#define	SBAM_ADINT0_SHIFT	3
++#define	SBAM_ADINT1_MASK	0x1f8		/* type1 size */
++#define	SBAM_ADINT1_SHIFT	3
++#define	SBAM_ADINT2_MASK	0x1f8		/* type2 size */
++#define	SBAM_ADINT2_SHIFT	3
++#define	SBAM_ADEN		0x400		/* enable */
++#define	SBAM_ADNEG		0x800		/* negative decode */
++#define	SBAM_BASE0_MASK		0xffffff00	/* type0 base address */
++#define	SBAM_BASE0_SHIFT	8
++#define	SBAM_BASE1_MASK		0xfffff000	/* type1 base address for the core */
++#define	SBAM_BASE1_SHIFT	12
++#define	SBAM_BASE2_MASK		0xffff0000	/* type2 base address for the core */
++#define	SBAM_BASE2_SHIFT	16
 +
-+	add_memory_region(0, mem, BOOT_MEM_RAM);
-+}
++/* sbtmconfiglow */
++#define	SBTMCL_CD_MASK		0xff		/* clock divide */
++#define	SBTMCL_CO_MASK		0xf800		/* clock offset */
++#define	SBTMCL_CO_SHIFT		11
++#define	SBTMCL_IF_MASK		0xfc0000	/* interrupt flags */
++#define	SBTMCL_IF_SHIFT		18
++#define	SBTMCL_IM_MASK		0x3000000	/* interrupt mode */
++#define	SBTMCL_IM_SHIFT		24
 +
-+unsigned long __init prom_free_prom_memory(void)
-+{
-+	return 0;
-+}
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/setup.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/setup.c
---- linux-2.6.12.5/arch/mips/bcm947xx/setup.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/setup.c	2005-08-28 16:57:28.317825624 +0200
-@@ -0,0 +1,127 @@
-+/*
-+ *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
++/* sbtmconfighigh */
++#define	SBTMCH_BM_MASK		0x3		/* busy mode */
++#define	SBTMCH_RM_MASK		0x3		/* retry mode */
++#define	SBTMCH_RM_SHIFT		2
++#define	SBTMCH_SM_MASK		0x30		/* stop mode */
++#define	SBTMCH_SM_SHIFT		4
++#define	SBTMCH_EM_MASK		0x300		/* sb error mode */
++#define	SBTMCH_EM_SHIFT		8
++#define	SBTMCH_IM_MASK		0xc00		/* int mode */
++#define	SBTMCH_IM_SHIFT		10
 +
-+#include <linux/init.h>
-+#include <linux/types.h>
-+#include <linux/tty.h>
-+#include <linux/serial.h>
-+#include <linux/serial_core.h>
-+#include <linux/serial_reg.h>
-+#include <asm/time.h>
-+#include <asm/reboot.h>
++/* sbbconfig */
++#define	SBBC_LAT_MASK		0x3		/* sb latency */
++#define	SBBC_MAX0_MASK		0xf0000		/* maxccntr0 */
++#define	SBBC_MAX0_SHIFT		16
++#define	SBBC_MAX1_MASK		0xf00000	/* maxccntr1 */
++#define	SBBC_MAX1_SHIFT		20
 +
-+#include <typedefs.h>
-+#include <sbutils.h>
-+#include <sbmips.h>
-+#include <sbpci.h>
-+#include <sbconfig.h>
-+#include <bcmdevs.h>
++/* sbbstate */
++#define	SBBS_SRD		0x1		/* st reg disable */
++#define	SBBS_HRD		0x2		/* hold reg disable */
 +
-+#if 1
++/* sbidlow */
++#define	SBIDL_CS_MASK		0x3		/* config space */
++#define	SBIDL_AR_MASK		0x38		/* # address ranges supported */
++#define	SBIDL_AR_SHIFT		3
++#define	SBIDL_SYNCH		0x40		/* sync */
++#define	SBIDL_INIT		0x80		/* initiator */
++#define	SBIDL_MINLAT_MASK	0xf00		/* minimum backplane latency */
++#define	SBIDL_MINLAT_SHIFT	8
++#define	SBIDL_MAXLAT		0xf000		/* maximum backplane latency */
++#define	SBIDL_MAXLAT_SHIFT	12
++#define	SBIDL_FIRST		0x10000		/* this initiator is first */
++#define	SBIDL_CW_MASK		0xc0000		/* cycle counter width */
++#define	SBIDL_CW_SHIFT		18
++#define	SBIDL_TP_MASK		0xf00000	/* target ports */
++#define	SBIDL_TP_SHIFT		20
++#define	SBIDL_IP_MASK		0xf000000	/* initiator ports */
++#define	SBIDL_IP_SHIFT		24
++#define	SBIDL_RV_MASK		0xf0000000	/* sonics backplane revision code */
++#define	SBIDL_RV_SHIFT		28
 +
-+#define SER_PORT1(reg)	(*((volatile unsigned char *)(0xb8000400+reg)))
++/* sbidhigh */
++#define	SBIDH_RC_MASK		0xf		/* revision code*/
++#define	SBIDH_CC_MASK		0xfff0		/* core code */
++#define	SBIDH_CC_SHIFT		4
++#define	SBIDH_VC_MASK		0xffff0000	/* vendor code */
++#define	SBIDH_VC_SHIFT		16
 +
-+int putDebugChar(char c)
-+{
-+	while (!(SER_PORT1(UART_LSR) & UART_LSR_THRE));
-+	SER_PORT1(UART_TX) = c;
-+	
-+	return 1;
-+}
++#define	SB_COMMIT		0xfd8		/* update buffered registers value */
 +
-+char getDebugChar(void)
-+{
-+	while (!(SER_PORT1(UART_LSR) & 1));
-+	return SER_PORT1(UART_RX);
-+}
++/* vendor codes */
++#define	SB_VEND_BCM		0x4243		/* Broadcom's SB vendor code */
++
++/* core codes */
++#define	SB_CC			0x800		/* chipcommon core */
++#define	SB_ILINE20		0x801		/* iline20 core */
++#define	SB_SDRAM		0x803		/* sdram core */
++#define	SB_PCI			0x804		/* pci core */
++#define	SB_MIPS			0x805		/* mips core */
++#define	SB_ENET			0x806		/* enet mac core */
++#define	SB_CODEC		0x807		/* v90 codec core */
++#define	SB_USB			0x808		/* usb 1.1 host/device core */
++#define	SB_ILINE100		0x80a		/* iline100 core */
++#define	SB_IPSEC		0x80b		/* ipsec core */
++#define	SB_PCMCIA		0x80d		/* pcmcia core */
++#define	SB_MEMC			0x80f		/* memc sdram core */
++#define	SB_EXTIF		0x811		/* external interface core */
++#define	SB_D11			0x812		/* 802.11 MAC core */
++#define	SB_MIPS33		0x816		/* mips3302 core */
++#define	SB_USB11H		0x817		/* usb 1.1 host core */
++#define	SB_USB11D		0x818		/* usb 1.1 device core */
++#define	SB_USB20H		0x819		/* usb 2.0 host core */
++#define	SB_USB20D		0x81A		/* usb 2.0 device core */
++#define	SB_SDIOH		0x81B		/* sdio host core */
++#define SB_ROBO                 0x81C           /* robo switch core */
++
++#endif	/* _SBCONFIG_H */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbextif.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbextif.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/sbextif.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbextif.h	2005-09-16 10:29:18.208586776 +0200
+@@ -0,0 +1,242 @@
++/*
++ * Hardware-specific External Interface I/O core definitions
++ * for the BCM47xx family of SiliconBackplane-based chips.
++ *
++ * The External Interface core supports a total of three external chip selects
++ * supporting external interfaces. One of the external chip selects is
++ * used for Flash, one is used for PCMCIA, and the other may be
++ * programmed to support either a synchronous interface or an
++ * asynchronous interface. The asynchronous interface can be used to
++ * support external devices such as UARTs and the BCM2019 Bluetooth
++ * baseband processor.
++ * The external interface core also contains 2 on-chip 16550 UARTs, clock
++ * frequency control, a watchdog interrupt timer, and a GPIO interface.
++ *
++ * Copyright 2001-2003, Broadcom Corporation   
++ * All Rights Reserved.   
++ *    
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
++ * $Id$
++ */
 +
++#ifndef	_SBEXTIF_H
++#define	_SBEXTIF_H
 +
-+static int ser_line = 0;
++/* external interface address space */
++#define	EXTIF_PCMCIA_MEMBASE(x)	(x)
++#define	EXTIF_PCMCIA_IOBASE(x)	((x) + 0x100000)
++#define	EXTIF_PCMCIA_CFGBASE(x)	((x) + 0x200000)
++#define	EXTIF_CFGIF_BASE(x)	((x) + 0x800000)
++#define	EXTIF_FLASH_BASE(x)	((x) + 0xc00000)
 +
-+static void
-+serial_add(void *regs, uint irq, uint baud_base, uint reg_shift)
-+{
-+	struct uart_port s;
++/* cpp contortions to concatenate w/arg prescan */
++#ifndef PAD
++#define	_PADLINE(line)	pad ## line
++#define	_XSTR(line)	_PADLINE(line)
++#define	PAD		_XSTR(__LINE__)
++#endif	/* PAD */
 +
-+	memset(&s, 0, sizeof(s));
++/*
++ * The multiple instances of output and output enable registers
++ * are present to allow driver software for multiple cores to control
++ * gpio outputs without needing to share a single register pair.
++ */
++struct gpiouser {
++	uint32	out;
++	uint32	outen;
++};
++#define	NGPIOUSER	5
 +
-+	s.line = ser_line++;
-+	s.membase = regs;
-+	s.irq = irq + 2;
-+	s.uartclk = baud_base;
-+	s.flags = ASYNC_BOOT_AUTOCONF;
-+	s.iotype = SERIAL_IO_MEM;
-+	s.regshift = reg_shift;
++typedef volatile struct {
++	uint32	corecontrol;
++	uint32	extstatus;
++	uint32	PAD[2];
 +
-+	if (early_serial_setup(&s) != 0) {
-+		printk(KERN_ERR "Serial setup failed!\n");
-+	}
-+}
-+#endif
++	/* pcmcia control registers */
++	uint32	pcmcia_config;
++	uint32	pcmcia_memwait;
++	uint32	pcmcia_attrwait;
++	uint32	pcmcia_iowait;
 +
-+extern void bcm47xx_time_init(void);
-+extern void bcm47xx_timer_setup(struct irqaction *irq);
++	/* programmable interface control registers */
++	uint32	prog_config;
++	uint32	prog_waitcount;
 +
-+void *nvram_get(char *foo)
-+{
-+	return NULL;
-+}
++	/* flash control registers */
++	uint32	flash_config;
++	uint32	flash_waitcount;
++	uint32	PAD[4];
 +
-+void *sbh;
++	uint32	watchdog;
 +
-+static void bcm47xx_machine_restart(char *command)
-+{
-+	/* Set the watchdog timer to reset immediately */
-+	cli();
-+	sb_watchdog(sbh, 1);
-+	while (1);
-+}
++	/* clock control */
++	uint32	clockcontrol_n;
++	uint32	clockcontrol_sb;
++	uint32	clockcontrol_pci;
++	uint32	clockcontrol_mii;
++	uint32	PAD[3];
 +
-+static void bcm47xx_machine_halt(void)
-+{
-+	/* Disable interrupts and watchdog and spin forever */
-+	cli();
-+	sb_watchdog(sbh, 0);
-+	while (1);
-+}
++	/* gpio */
++	uint32	gpioin;
++	struct gpiouser	gpio[NGPIOUSER];
++	uint32	PAD;
++	uint32	ejtagouten;
++	uint32	gpiointpolarity;
++	uint32	gpiointmask;
++	uint32	PAD[153];
 +
-+static int __init bcm47xx_init(void)
-+{
++	uint8	uartdata;
++	uint8	PAD[3];
++	uint8	uartimer;
++	uint8	PAD[3];
++	uint8	uartfcr;
++	uint8	PAD[3];
++	uint8	uartlcr;
++	uint8	PAD[3];
++	uint8	uartmcr;
++	uint8	PAD[3];
++	uint8	uartlsr;
++	uint8	PAD[3];
++	uint8	uartmsr;
++	uint8	PAD[3];
++	uint8	uartscratch;
++	uint8	PAD[3];
++} extifregs_t;
 +
-+	sbh = sb_kattach();
-+	sb_mips_init(sbh);
-+	sbpci_init(sbh);
-+	sb_serial_init(sbh, serial_add);
++/* corecontrol */
++#define	CC_UE		(1 << 0)		/* uart enable */
 +
-+	_machine_restart = bcm47xx_machine_restart;
-+	_machine_halt = bcm47xx_machine_halt;
-+	_machine_power_off = bcm47xx_machine_halt;
-+	
-+	board_time_init = bcm47xx_time_init;
-+	board_timer_setup = bcm47xx_timer_setup;
-+	
-+	return 0;
-+}
++/* extstatus */
++#define	ES_EM		(1 << 0)		/* endian mode (ro) */
++#define	ES_EI		(1 << 1)		/* external interrupt pin (ro) */
++#define	ES_GI		(1 << 2)		/* gpio interrupt pin (ro) */
 +
-+early_initcall(bcm47xx_init);
-diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/time.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/time.c
---- linux-2.6.12.5/arch/mips/bcm947xx/time.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/time.c	2005-08-28 16:57:55.440702320 +0200
-@@ -0,0 +1,59 @@
-+/*
-+ *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
-+ *
-+ *  This program is free software; you can redistribute  it and/or modify it
-+ *  under  the terms of  the GNU General  Public License as published by the
-+ *  Free Software Foundation;  either version 2 of the  License, or (at your
-+ *  option) any later version.
-+ *
-+ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
-+ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
-+ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
-+ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
-+ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
-+ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
-+ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
-+ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
-+ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
-+ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-+ *
-+ *  You should have received a copy of the  GNU General Public License along
-+ *  with this program; if not, write  to the Free Software Foundation, Inc.,
-+ *  675 Mass Ave, Cambridge, MA 02139, USA.
-+ */
++/* gpio bit mask */
++#define GPIO_BIT0	(1 << 0)
++#define GPIO_BIT1	(1 << 1)
++#define GPIO_BIT2	(1 << 2)
++#define GPIO_BIT3	(1 << 3)
++#define GPIO_BIT4	(1 << 4)
++#define GPIO_BIT5	(1 << 5)
++#define GPIO_BIT6	(1 << 6)
++#define GPIO_BIT7	(1 << 7)
 +
-+#include <linux/config.h>
-+#include <linux/init.h>
-+#include <linux/kernel.h>
-+#include <linux/sched.h>
-+#include <linux/serial_reg.h>
-+#include <linux/interrupt.h>
-+#include <asm/addrspace.h>
-+#include <asm/io.h>
-+#include <asm/time.h>
 +
-+void __init
-+bcm47xx_time_init(void)
-+{
-+	unsigned int hz;
++/* pcmcia/prog/flash_config */
++#define	CF_EN		(1 << 0)		/* enable */
++#define	CF_EM_MASK	0xe			/* mode */
++#define	CF_EM_SHIFT	1
++#define	CF_EM_FLASH	0x0			/* flash/asynchronous mode */
++#define	CF_EM_SYNC	0x2			/* synchronous mode */
++#define	CF_EM_PCMCIA	0x4			/* pcmcia mode */
++#define	CF_DS		(1 << 4)		/* destsize:  0=8bit, 1=16bit */
++#define	CF_BS		(1 << 5)		/* byteswap */
++#define	CF_CD_MASK	0xc0			/* clock divider */
++#define	CF_CD_SHIFT	6
++#define	CF_CD_DIV2	0x0			/* backplane/2 */
++#define	CF_CD_DIV3	0x40			/* backplane/3 */
++#define	CF_CD_DIV4	0x80			/* backplane/4 */
++#define	CF_CE		(1 << 8)		/* clock enable */
++#define	CF_SB		(1 << 9)		/* size/bytestrobe (synch only) */
 +
-+	/*
-+	 * Use deterministic values for initial counter interrupt
-+	 * so that calibrate delay avoids encountering a counter wrap.
-+	 */
-+	write_c0_count(0);
-+	write_c0_compare(0xffff);
++/* pcmcia_memwait */
++#define	PM_W0_MASK	0x3f			/* waitcount0 */
++#define	PM_W1_MASK	0x1f00			/* waitcount1 */
++#define	PM_W1_SHIFT	8
++#define	PM_W2_MASK	0x1f0000		/* waitcount2 */
++#define	PM_W2_SHIFT	16
++#define	PM_W3_MASK	0x1f000000		/* waitcount3 */
++#define	PM_W3_SHIFT	24
 +
-+	hz = 200 * 1000 * 1000;
++/* pcmcia_attrwait */
++#define	PA_W0_MASK	0x3f			/* waitcount0 */
++#define	PA_W1_MASK	0x1f00			/* waitcount1 */
++#define	PA_W1_SHIFT	8
++#define	PA_W2_MASK	0x1f0000		/* waitcount2 */
++#define	PA_W2_SHIFT	16
++#define	PA_W3_MASK	0x1f000000		/* waitcount3 */
++#define	PA_W3_SHIFT	24
 +
-+	/* Set MIPS counter frequency for fixed_rate_gettimeoffset() */
-+	mips_hpt_frequency = hz / 2;
++/* pcmcia_iowait */
++#define	PI_W0_MASK	0x3f			/* waitcount0 */
++#define	PI_W1_MASK	0x1f00			/* waitcount1 */
++#define	PI_W1_SHIFT	8
++#define	PI_W2_MASK	0x1f0000		/* waitcount2 */
++#define	PI_W2_SHIFT	16
++#define	PI_W3_MASK	0x1f000000		/* waitcount3 */
++#define	PI_W3_SHIFT	24
 +
-+}
++/* prog_waitcount */
++#define	PW_W0_MASK	0x0000001f			/* waitcount0 */
++#define	PW_W1_MASK	0x00001f00			/* waitcount1 */
++#define	PW_W1_SHIFT	8
++#define	PW_W2_MASK	0x001f0000		/* waitcount2 */
++#define	PW_W2_SHIFT	16
++#define	PW_W3_MASK	0x1f000000		/* waitcount3 */
++#define	PW_W3_SHIFT	24
 +
-+void __init
-+bcm47xx_timer_setup(struct irqaction *irq)
-+{
-+	/* Enable the timer interrupt */
-+	setup_irq(7, irq);
-+}
-diff -Nur linux-2.6.12.5/arch/mips/kernel/cpu-probe.c linux-2.6.12.5-brcm/arch/mips/kernel/cpu-probe.c
---- linux-2.6.12.5/arch/mips/kernel/cpu-probe.c	2005-08-15 02:20:18.000000000 +0200
-+++ linux-2.6.12.5-brcm/arch/mips/kernel/cpu-probe.c	2005-08-28 11:12:20.538842736 +0200
-@@ -555,6 +555,28 @@
- 	}
- }
- 
-+static inline void cpu_probe_broadcom(struct cpuinfo_mips *c)
-+{
-+	decode_config1(c);
-+	switch (c->processor_id & 0xff00) {
-+		case PRID_IMP_BCM3302:
-+			c->cputype = CPU_BCM3302;
-+			c->isa_level = MIPS_CPU_ISA_M32;
-+			c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
-+					MIPS_CPU_4KTLB | MIPS_CPU_COUNTER;
-+		break;
-+		case PRID_IMP_BCM4710:
-+			c->cputype = CPU_BCM4710;
-+			c->isa_level = MIPS_CPU_ISA_M32;
-+			c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
-+					MIPS_CPU_4KTLB | MIPS_CPU_COUNTER;
-+		break;
-+	default:
-+		c->cputype = CPU_UNKNOWN;
-+		break;
-+	}
-+}
++#define PW_W0       0x0000000c
++#define PW_W1       0x00000a00
++#define PW_W2       0x00020000
++#define PW_W3       0x01000000
 +
- __init void cpu_probe(void)
- {
- 	struct cpuinfo_mips *c = &current_cpu_data;
-@@ -577,7 +599,9 @@
- 	case PRID_COMP_SIBYTE:
- 		cpu_probe_sibyte(c);
- 		break;
--
-+	case PRID_COMP_BROADCOM:
-+		cpu_probe_broadcom(c);
-+		break;
- 	case PRID_COMP_SANDCRAFT:
- 		cpu_probe_sandcraft(c);
- 		break;
-diff -Nur linux-2.6.12.5/arch/mips/kernel/head.S linux-2.6.12.5-brcm/arch/mips/kernel/head.S
---- linux-2.6.12.5/arch/mips/kernel/head.S	2005-08-15 02:20:18.000000000 +0200
-+++ linux-2.6.12.5-brcm/arch/mips/kernel/head.S	2005-08-28 11:12:20.539842584 +0200
-@@ -122,6 +122,14 @@
- #endif
- 	.endm
- 
-+#ifdef CONFIG_BCM4710
-+#undef eret
-+#define eret nop; nop; eret
-+#endif
++/* flash_waitcount */
++#define	FW_W0_MASK	0x1f			/* waitcount0 */
++#define	FW_W1_MASK	0x1f00			/* waitcount1 */
++#define	FW_W1_SHIFT	8
++#define	FW_W2_MASK	0x1f0000		/* waitcount2 */
++#define	FW_W2_SHIFT	16
++#define	FW_W3_MASK	0x1f000000		/* waitcount3 */
++#define	FW_W3_SHIFT	24
 +
-+	j	kernel_entry
-+	nop
++/* watchdog */
++#define WATCHDOG_CLOCK	48000000		/* Hz */
 +
- 	/*
- 	 * Reserved space for exception handlers.
- 	 * Necessary for machines which link their kernels at KSEG0.
-diff -Nur linux-2.6.12.5/arch/mips/kernel/proc.c linux-2.6.12.5-brcm/arch/mips/kernel/proc.c
---- linux-2.6.12.5/arch/mips/kernel/proc.c	2005-08-15 02:20:18.000000000 +0200
-+++ linux-2.6.12.5-brcm/arch/mips/kernel/proc.c	2005-08-28 11:12:20.553840456 +0200
-@@ -75,7 +75,9 @@
- 	[CPU_VR4133]	"NEC VR4133",
- 	[CPU_VR4181]	"NEC VR4181",
- 	[CPU_VR4181A]	"NEC VR4181A",
--	[CPU_SR71000]	"Sandcraft SR71000"
-+	[CPU_SR71000]	"Sandcraft SR71000",
-+	[CPU_BCM3302]	"Broadcom BCM3302",
-+	[CPU_BCM4710]	"Broadcom BCM4710"
- };
- 
- 
-diff -Nur linux-2.6.12.5/arch/mips/mm/tlbex.c linux-2.6.12.5-brcm/arch/mips/mm/tlbex.c
---- linux-2.6.12.5/arch/mips/mm/tlbex.c	2005-08-15 02:20:18.000000000 +0200
-+++ linux-2.6.12.5-brcm/arch/mips/mm/tlbex.c	2005-08-28 11:12:20.587835288 +0200
-@@ -851,6 +851,8 @@
- 	case CPU_4KSC:
- 	case CPU_20KC:
- 	case CPU_25KF:
-+	case CPU_BCM3302:
-+	case CPU_BCM4710:
- 		tlbw(p);
- 		break;
- 
-diff -Nur linux-2.6.12.5/arch/mips/pci/Makefile linux-2.6.12.5-brcm/arch/mips/pci/Makefile
---- linux-2.6.12.5/arch/mips/pci/Makefile	2005-08-15 02:20:18.000000000 +0200
-+++ linux-2.6.12.5-brcm/arch/mips/pci/Makefile	2005-08-28 16:41:44.565297816 +0200
-@@ -18,6 +18,7 @@
- obj-$(CONFIG_MIPS_TX3927)	+= ops-jmr3927.o
- obj-$(CONFIG_PCI_VR41XX)	+= ops-vr41xx.o pci-vr41xx.o
- obj-$(CONFIG_NEC_CMBVR4133)	+= fixup-vr4133.o
-+obj-$(CONFIG_BCM947XX)		+= ops-sb.o fixup-bcm47xx.o pci-bcm47xx.o
- 
- #
- # These are still pretty much in the old state, watch, go blind.
-diff -Nur linux-2.6.12.5/arch/mips/pci/fixup-bcm47xx.c linux-2.6.12.5-brcm/arch/mips/pci/fixup-bcm47xx.c
---- linux-2.6.12.5/arch/mips/pci/fixup-bcm47xx.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/pci/fixup-bcm47xx.c	2005-08-28 11:12:20.611831640 +0200
-@@ -0,0 +1,23 @@
-+#include <linux/init.h>
-+#include <linux/pci.h>
++/* clockcontrol_n */
++#define	CN_N1_MASK	0x3f			/* n1 control */
++#define	CN_N2_MASK	0x3f00			/* n2 control */
++#define	CN_N2_SHIFT	8
 +
-+/* Do platform specific device initialization at pci_enable_device() time */
-+int pcibios_plat_dev_init(struct pci_dev *dev)
-+{
-+	return 0;
-+}
++/* clockcontrol_sb/pci/mii */
++#define	CC_M1_MASK	0x3f			/* m1 control */
++#define	CC_M2_MASK	0x3f00			/* m2 control */
++#define	CC_M2_SHIFT	8
++#define	CC_M3_MASK	0x3f0000		/* m3 control */
++#define	CC_M3_SHIFT	16
++#define	CC_MC_MASK	0x1f000000		/* mux control */
++#define	CC_MC_SHIFT	24
 +
-+int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
-+{
-+	u8 irq;
-+	
-+	if (dev->bus->number == 1)
-+		return 2;
++/* Clock control default values */
++#define CC_DEF_N	0x0009			/* Default values for bcm4710 */
++#define CC_DEF_100	0x04020011
++#define CC_DEF_33	0x11030011
++#define CC_DEF_25	0x11050011
 +
-+	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
-+	return irq + 2;
-+}
++/* Clock control values for 125Mhz */
++#define	CC_125_N	0x0802
++#define	CC_125_M	0x04020009
++#define	CC_125_M25	0x11090009
++#define	CC_125_M33	0x11090005
 +
-+struct pci_fixup pcibios_fixups[] __initdata = {
-+	{ 0 }
-+};
-diff -Nur linux-2.6.12.5/arch/mips/pci/ops-sb.c linux-2.6.12.5-brcm/arch/mips/pci/ops-sb.c
---- linux-2.6.12.5/arch/mips/pci/ops-sb.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/pci/ops-sb.c	2005-08-28 11:12:20.612831488 +0200
-@@ -0,0 +1,44 @@
-+#include <linux/kernel.h>
-+#include <linux/init.h>
-+#include <linux/pci.h>
-+#include <linux/types.h>
-+#include <asm/pci.h>
++/* Clock control magic field values */
++#define	CC_F6_2		0x02			/* A factor of 2 in */
++#define	CC_F6_3		0x03			/*  6-bit fields like */
++#define	CC_F6_4		0x05			/*  N1, M1 or M3 */
++#define	CC_F6_5		0x09
++#define	CC_F6_6		0x11
++#define	CC_F6_7		0x21
 +
-+#include <typedefs.h>
-+#include <sbpci.h>
++#define	CC_F5_BIAS	5			/* 5-bit fields get this added */
 +
-+extern void *sbh;
-+//extern spinlock_t bcm47xx_sbh_lock;
++#define	CC_MC_BYPASS	0x08
++#define	CC_MC_M1	0x04
++#define	CC_MC_M1M2	0x02
++#define	CC_MC_M1M2M3	0x01
++#define	CC_MC_M1M3	0x11
 +
-+static int
-+sb_pci_read_config(struct pci_bus *bus, unsigned int devfn,
-+		     int reg, int size, u32 *val)
-+{
-+	//unsigned long flags;
-+	int ret;
++#define	CC_CLOCK_BASE	24000000	/* Half the clock freq. in the 4710 */
 +
++#endif	/* _SBEXTIF_H */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbmemc.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbmemc.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/sbmemc.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbmemc.h	2005-09-16 10:29:18.209586624 +0200
+@@ -0,0 +1,144 @@
++/*
++ * BCM47XX Sonics SiliconBackplane DDR/SDRAM controller core hardware definitions.
++ *
++ * Copyright 2001-2003, Broadcom Corporation   
++ * All Rights Reserved.   
++ *    
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
++ * $Id$
++ */
 +
-+	//spin_lock_irqsave(&sbh_lock, flags);
-+	ret = sbpci_read_config(sbh, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), reg, val, size);
-+	//spin_unlock_irqrestore(&sbh_lock, flags);
++#ifndef	_SBMEMC_H
++#define	_SBMEMC_H
 +
-+	return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-+}
++#ifdef _LANGUAGE_ASSEMBLY
 +
-+static int
-+sb_pci_write_config(struct pci_bus *bus, unsigned int devfn,
-+		      int reg, int size, u32 val)
-+{
-+//	unsigned long flags;
-+	int ret;
++#define	MEMC_CONTROL		0x00
++#define	MEMC_CONFIG		0x04
++#define	MEMC_REFRESH		0x08
++#define	MEMC_BISTSTAT		0x0c
++#define	MEMC_MODEBUF		0x10
++#define	MEMC_BKCLS		0x14
++#define	MEMC_PRIORINV		0x18
++#define	MEMC_DRAMTIM		0x1c
++#define	MEMC_INTSTAT		0x20
++#define	MEMC_INTMASK		0x24
++#define	MEMC_INTINFO		0x28
++#define	MEMC_NCDLCTL		0x30
++#define	MEMC_RDNCDLCOR		0x34
++#define	MEMC_WRNCDLCOR		0x38
++#define	MEMC_MISCDLYCTL		0x3c
++#define	MEMC_DQSGATENCDL	0x40
++#define	MEMC_SPARE		0x44
++#define	MEMC_TPADDR		0x48
++#define	MEMC_TPDATA		0x4c
++#define	MEMC_BARRIER		0x50
++#define	MEMC_CORE		0x54
 +
-+//	spin_lock_irqsave(&sbh_lock, flags);
-+	ret = sbpci_write_config(sbh, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), reg, &val, size);
-+//	spin_unlock_irqrestore(&sbh_lock, flags);
-+	return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
-+}
 +
-+struct pci_ops sb_pci_ops = {
-+	.read = sb_pci_read_config,
-+	.write = sb_pci_write_config,
-+};
-diff -Nur linux-2.6.12.5/arch/mips/pci/pci-bcm47xx.c linux-2.6.12.5-brcm/arch/mips/pci/pci-bcm47xx.c
---- linux-2.6.12.5/arch/mips/pci/pci-bcm47xx.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/arch/mips/pci/pci-bcm47xx.c	2005-08-28 11:12:20.612831488 +0200
-@@ -0,0 +1,61 @@
-+#include <linux/init.h>
-+#include <linux/pci.h>
-+#include <linux/types.h>
++#else
 +
-+#include <asm/cpu.h>
-+#include <asm/io.h>
++/* Sonics side: MEMC core registers */
++typedef volatile struct sbmemcregs {
++	uint32	control;
++	uint32	config;
++	uint32	refresh;
++	uint32	biststat;
++	uint32	modebuf;
++	uint32	bkcls;
++	uint32	priorinv;
++	uint32	dramtim;
++	uint32	intstat;
++	uint32	intmask;
++	uint32	intinfo;
++	uint32	reserved1;
++	uint32	ncdlctl;
++	uint32	rdncdlcor;
++	uint32	wrncdlcor;
++	uint32	miscdlyctl;
++	uint32	dqsgatencdl;
++	uint32	spare;
++	uint32	tpaddr;
++	uint32	tpdata;
++	uint32	barrier;
++	uint32	core;
++} sbmemcregs_t;
++
++#endif
++
++/* MEMC Core Init values (OCP ID 0x80f) */
++
++/* For sdr: */
++#define MEMC_SD_CONFIG_INIT	0x00048000
++#define MEMC_SD_DRAMTIM_INIT	0x000754da
++#define MEMC_SD_RDNCDLCOR_INIT	0x00000000
++#define MEMC_SD_WRNCDLCOR_INIT	0x49351200
++#define MEMC_SD1_WRNCDLCOR_INIT	0x14500200	/* For corerev 1 (4712) */
++#define MEMC_SD_MISCDLYCTL_INIT	0x00061c1b
++#define MEMC_SD1_MISCDLYCTL_INIT 0x00021416	/* For corerev 1 (4712) */
++#define MEMC_SD_CONTROL_INIT0	0x00000002
++#define MEMC_SD_CONTROL_INIT1	0x00000008
++#define MEMC_SD_CONTROL_INIT2	0x00000004
++#define MEMC_SD_CONTROL_INIT3	0x00000010
++#define MEMC_SD_CONTROL_INIT4	0x00000001
++#define MEMC_SD_MODEBUF_INIT	0x00000000
++#define MEMC_SD_REFRESH_INIT	0x0000840f
 +
-+#include <typedefs.h>
-+#include <sbconfig.h>
 +
-+extern struct pci_ops sb_pci_ops;
++/* This is for SDRM8X8X4 */
++#define	MEMC_SDR_INIT		0x0008
++#define	MEMC_SDR_MODE		0x32
++#define	MEMC_SDR_NCDL		0x00020032
++#define	MEMC_SDR1_NCDL		0x0002020f	/* For corerev 1 (4712) */
 +
-+static struct resource sb_pci_mem_resource = {
-+	.name   = "SB PCI Memory resources",
-+	.start  = SB_ENUM_BASE,
-+	.end    = SB_ENUM_LIM - 1,
-+	.flags  = IORESOURCE_MEM,
-+};
++/* For ddr: */
++#define MEMC_CONFIG_INIT	0x00048000
++#define MEMC_DRAMTIM_INIT	0x000754d9
++#define MEMC_RDNCDLCOR_INIT	0x00000000
++#define MEMC_WRNCDLCOR_INIT	0x49351200
++#define MEMC_1_WRNCDLCOR_INIT	0x14500200
++#define MEMC_DQSGATENCDL_INIT	0x00030000
++#define MEMC_MISCDLYCTL_INIT	0x21061c1b
++#define MEMC_1_MISCDLYCTL_INIT	0x21021400
++#define MEMC_NCDLCTL_INIT	0x00002001
++#define MEMC_CONTROL_INIT0	0x00000002
++#define MEMC_CONTROL_INIT1	0x00000008
++#define MEMC_MODEBUF_INIT0	0x00004000
++#define MEMC_CONTROL_INIT2	0x00000010
++#define MEMC_MODEBUF_INIT1	0x00000100
++#define MEMC_CONTROL_INIT3	0x00000010
++#define MEMC_CONTROL_INIT4	0x00000008
++#define MEMC_REFRESH_INIT	0x0000840f
++#define MEMC_CONTROL_INIT5	0x00000004
++#define MEMC_MODEBUF_INIT2	0x00000000
++#define MEMC_CONTROL_INIT6	0x00000010
++#define MEMC_CONTROL_INIT7	0x00000001
 +
-+static struct resource sb_pci_io_resource = {
-+	.name   = "SB PCI I/O resources",
-+	.start  = 0x100,
-+	.end    = 0x1FF,
-+	.flags  = IORESOURCE_IO,
-+};
 +
-+static struct pci_controller bcm47xx_sb_pci_controller = {
-+	.pci_ops        = &sb_pci_ops,
-+	.mem_resource	= &sb_pci_mem_resource,
-+	.io_resource	= &sb_pci_io_resource,
-+};
++/* This is for DDRM16X16X2 */
++#define	MEMC_DDR_INIT		0x0009
++#define	MEMC_DDR_MODE		0x62
++#define	MEMC_DDR_NCDL		0x0005050a
++#define	MEMC_DDR1_NCDL		0x00000a0a	/* For corerev 1 (4712) */
 +
-+static struct resource ext_pci_mem_resource = {
-+	.name   = "Ext PCI Memory resources",
-+	.start  = SB_PCI_DMA,
-+//	.end    = 0x7FFFFFFF,
-+	.end    = 0x40FFFFFF,
-+	.flags  = IORESOURCE_MEM,
-+};
++/* mask for sdr/ddr calibration registers */
++#define MEMC_RDNCDLCOR_RD_MASK	0x000000ff
++#define MEMC_WRNCDLCOR_WR_MASK	0x000000ff
++#define MEMC_DQSGATENCDL_G_MASK	0x000000ff
 +
-+static struct resource ext_pci_io_resource = {
-+	.name   = "Ext PCI I/O resources",
-+	.start  = 0x200,
-+	.end    = 0x2FF,
-+	.flags  = IORESOURCE_IO,
-+};
++/* masks for miscdlyctl registers */
++#define MEMC_MISC_SM_MASK	0x30000000
++#define MEMC_MISC_SM_SHIFT	28
++#define MEMC_MISC_SD_MASK	0x0f000000
++#define MEMC_MISC_SD_SHIFT	24
 +
-+static struct pci_controller bcm47xx_ext_pci_controller = {
-+	.pci_ops        = &sb_pci_ops,
-+	.mem_resource	= &ext_pci_mem_resource,
-+	.io_resource	= &ext_pci_io_resource,
-+};
++/* hw threshhold for calculating wr/rd for sdr memc */
++#define MEMC_CD_THRESHOLD	128
 +
-+static int __init bcm47xx_pci_init(void)
-+{
-+	register_pci_controller(&bcm47xx_sb_pci_controller);
-+	register_pci_controller(&bcm47xx_ext_pci_controller);
-+	return 0;
-+}
++/* Low bit of init register says if memc is ddr or sdr */
++#define MEMC_CONFIG_DDR		0x00000001
 +
-+early_initcall(bcm47xx_pci_init);
-diff -Nur linux-2.6.12.5/arch/mips/pci/pci.c linux-2.6.12.5-brcm/arch/mips/pci/pci.c
---- linux-2.6.12.5/arch/mips/pci/pci.c	2005-08-15 02:20:18.000000000 +0200
-+++ linux-2.6.12.5-brcm/arch/mips/pci/pci.c	2005-08-28 11:12:20.629828904 +0200
-@@ -238,7 +238,8 @@
- 		if (dev->resource[i].flags & IORESOURCE_IO)
- 			offset = hose->io_offset;
- 		else if (dev->resource[i].flags & IORESOURCE_MEM)
--			offset = hose->mem_offset;
-+			offset = 0x26000000;
-+		//	offset = hose->mem_offset;
- 
- 		dev->resource[i].start += offset;
- 		dev->resource[i].end += offset;
-diff -Nur linux-2.6.12.5/drivers/mtd/maps/Kconfig linux-2.6.12.5-brcm/drivers/mtd/maps/Kconfig
---- linux-2.6.12.5/drivers/mtd/maps/Kconfig	2005-08-15 02:20:18.000000000 +0200
-+++ linux-2.6.12.5-brcm/drivers/mtd/maps/Kconfig	2005-08-28 16:21:23.595930936 +0200
-@@ -357,6 +357,12 @@
- 	  Mapping for the Flaga digital module. If you don't have one, ignore
- 	  this setting.
- 
-+config MTD_BCM47XX
-+	tristate "BCM47xx flash device"
-+	depends on MIPS && MTD_CFI && BCM947XX
-+	help
-+	  Support for the flash chips on the BCM947xx board.
-+	  
- config MTD_BEECH
- 	tristate "CFI Flash device mapped on IBM 405LP Beech"
- 	depends on MTD_CFI && PPC32 && 40x && BEECH
-diff -Nur linux-2.6.12.5/drivers/mtd/maps/Makefile linux-2.6.12.5-brcm/drivers/mtd/maps/Makefile
---- linux-2.6.12.5/drivers/mtd/maps/Makefile	2005-08-15 02:20:18.000000000 +0200
-+++ linux-2.6.12.5-brcm/drivers/mtd/maps/Makefile	2005-08-28 11:12:20.666823280 +0200
-@@ -31,6 +31,7 @@
- obj-$(CONFIG_MTD_PCMCIA)	+= pcmciamtd.o
- obj-$(CONFIG_MTD_RPXLITE)	+= rpxlite.o
- obj-$(CONFIG_MTD_TQM8XXL)	+= tqm8xxl.o
-+obj-$(CONFIG_MTD_BCM47XX)	+= bcm47xx-flash.o
- obj-$(CONFIG_MTD_SA1100)	+= sa1100-flash.o
- obj-$(CONFIG_MTD_IPAQ)		+= ipaq-flash.o
- obj-$(CONFIG_MTD_SBC_GXX)	+= sbc_gxx.o
-diff -Nur linux-2.6.12.5/drivers/mtd/maps/bcm47xx-flash.c linux-2.6.12.5-brcm/drivers/mtd/maps/bcm47xx-flash.c
---- linux-2.6.12.5/drivers/mtd/maps/bcm47xx-flash.c	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/drivers/mtd/maps/bcm47xx-flash.c	2005-08-28 17:01:50.948899632 +0200
-@@ -0,0 +1,131 @@
++#endif	/* _SBMEMC_H */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbmips.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbmips.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/sbmips.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbmips.h	2005-09-16 10:29:18.209586624 +0200
+@@ -0,0 +1,56 @@
 +/*
-+ * Flash mapping for BCM947XX boards
++ * Broadcom SiliconBackplane MIPS definitions
++ *
++ * SB MIPS cores are custom MIPS32 processors with SiliconBackplane
++ * OCP interfaces. The CP0 processor ID is 0x00024000, where bits
++ * 23:16 mean Broadcom and bits 15:8 mean a MIPS core with an OCP
++ * interface. The core revision is stored in the SB ID register in SB
++ * configuration space.
 + *
-+ * Copyright (C) 2001 Broadcom Corporation
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ * 
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
 + *
-+ * $Id: bcm47xx-flash.c,v 1.1 2004/10/21 07:18:31 jolt Exp $
++ * $Id$
 + */
 +
-+#include <linux/init.h>
-+#include <linux/module.h>
-+#include <linux/types.h>
-+#include <linux/kernel.h>
-+#include <asm/io.h>
-+#include <linux/mtd/mtd.h>
-+#include <linux/mtd/map.h>
-+#include <linux/mtd/partitions.h>
-+#include <linux/config.h>
-+
-+#define WINDOW_ADDR 0x1c000000
-+#define WINDOW_SIZE (0x400000*2)
-+#define BUSWIDTH 2
-+
-+static struct mtd_info *bcm947xx_mtd;
-+
-+static void bcm947xx_map_copy_from(struct map_info *map, void *to, unsigned long from, ssize_t len)
-+{
-+#define MIPS_MEMCPY_ALIGN 4
-+	map_word ret;
-+	ssize_t transfer;
-+	ssize_t done = 0;
-+	if ((len >= MIPS_MEMCPY_ALIGN) && (!(from & (MIPS_MEMCPY_ALIGN - 1))) && (!(((unsigned int)to & (MIPS_MEMCPY_ALIGN - 1))))) {
-+		done = len & ~(MIPS_MEMCPY_ALIGN - 1);
-+		memcpy_fromio(to, map->virt + from, done);
-+	}
-+	while (done < len) {
-+		ret = map->read(map, from + done);
-+		transfer = len - done;
-+		if (transfer > map->bankwidth)
-+			transfer = map->bankwidth;
-+		memcpy((void *)((unsigned long)to + done), &ret.x[0], transfer);
-+		done += transfer;
-+	}
-+}
++#ifndef	_SBMIPS_H
++#define	_SBMIPS_H
 +
-+static struct map_info bcm947xx_map = {
-+	name: "Physically mapped flash",
-+	size: WINDOW_SIZE,
-+	bankwidth: BUSWIDTH,
-+	phys: WINDOW_ADDR,
-+};
++#ifndef _LANGUAGE_ASSEMBLY
 +
-+#define SECTORS *64*1024
-+
-+#ifdef CONFIG_MTD_PARTITIONS
-+#if 0
-+static struct mtd_partition bcm947xx_parts[] = {
-+// 64 - 4 - 14 - 1 = 45 = 8 + 37
-+	{ name: "pmon",	offset: 0, size: 4 SECTORS, mask_flags: MTD_WRITEABLE },
-+	{ name: "linux", offset: MTDPART_OFS_APPEND, size: 14 SECTORS },
-+	{ name: "rescue", offset: MTDPART_OFS_APPEND, size: 8 SECTORS },
-+	{ name: "rootfs", offset: MTDPART_OFS_APPEND, size: 37 SECTORS },
-+	{ name: "nvram", offset: MTDPART_OFS_APPEND, size: 1 SECTORS, mask_flags: MTD_WRITEABLE },
-+};
-+#else
-+static struct mtd_partition bcm947xx_parts[] = {
-+ 	{ name: "cfe",
-+           offset:  0,
-+           size:  384*1024,
-+           mask_flags: MTD_WRITEABLE
-+         },
-+ 	{ name: "config",
-+           offset:  MTDPART_OFS_APPEND,
-+           size:  128*1024
-+         },
-+ 	{ name: "linux",
-+           offset:  MTDPART_OFS_APPEND,
-+           size:  10*128*1024
-+         },
-+ 	{ name: "jffs",
-+           offset: MTDPART_OFS_APPEND,
-+           size: (8*1024*1024)-((384*1024)+(128*1024)+(10*128*1024)+(128*1024)),
-+         },
-+ 	{ name: "nvram",
-+           offset: MTDPART_OFS_APPEND,
-+           size: 128*1024,
-+           mask_flags: MTD_WRITEABLE
-+         },
-+};
-+#endif
-+#endif
++/* cpp contortions to concatenate w/arg prescan */
++#ifndef PAD
++#define	_PADLINE(line)	pad ## line
++#define	_XSTR(line)	_PADLINE(line)
++#define	PAD		_XSTR(__LINE__)
++#endif	/* PAD */
 +
-+int __init init_bcm947xx_map(void)
-+{
-+	bcm947xx_map.virt = (unsigned long)ioremap(WINDOW_ADDR, WINDOW_SIZE);
++typedef volatile struct {
++	uint32	corecontrol;
++	uint32	PAD[2];
++	uint32	biststatus;
++	uint32	PAD[4];
++	uint32	intstatus;
++	uint32	intmask;
++	uint32	timer;
++} mipsregs_t;
 +
-+	if (!bcm947xx_map.virt) {
-+		printk("Failed to ioremap\n");
-+		return -EIO;
-+	}
-+	simple_map_init(&bcm947xx_map);
-+	
-+	bcm947xx_map.copy_from = bcm947xx_map_copy_from;
-+	
-+	if (!(bcm947xx_mtd = do_map_probe("cfi_probe", &bcm947xx_map))) {
-+		printk("Failed to do_map_probe\n");
-+		iounmap((void *)bcm947xx_map.virt);
-+		return -ENXIO;
-+	}
++extern uint32 sb_flag(void *sbh);
++extern uint sb_irq(void *sbh);
 +
-+	bcm947xx_mtd->owner = THIS_MODULE;
++extern void sb_serial_init(void *sbh, void (*add)(void *regs, uint irq, uint baud_base, uint reg_shift));
 +
-+	printk(KERN_NOTICE "flash device: %x at %x\n", bcm947xx_mtd->size, WINDOW_ADDR);
++extern void sb_mips_init(void *sbh);
++extern uint32 sb_mips_clock(void *sbh);
++extern bool sb_mips_setclock(void *sbh, uint32 mipsclock, uint32 sbclock, uint32 pciclock);
 +
-+#ifdef CONFIG_MTD_PARTITIONS
-+	return add_mtd_partitions(bcm947xx_mtd, bcm947xx_parts, sizeof(bcm947xx_parts)/sizeof(bcm947xx_parts[0]));
-+#else
-+	return 0;
-+#endif
-+}
++extern uint32 sb_memc_get_ncdl(void *sbh);
 +
-+void __exit cleanup_bcm947xx_map(void)
-+{
-+#ifdef CONFIG_MTD_PARTITIONS
-+	del_mtd_partitions(bcm947xx_mtd);
-+#endif
-+	map_destroy(bcm947xx_mtd);
-+	iounmap((void *)bcm947xx_map.virt);
-+}
++#endif /* _LANGUAGE_ASSEMBLY */
 +
-+module_init(init_bcm947xx_map);
-+module_exit(cleanup_bcm947xx_map);
-diff -Nur linux-2.6.12.5/drivers/net/b44.c linux-2.6.12.5-brcm/drivers/net/b44.c
---- linux-2.6.12.5/drivers/net/b44.c	2005-08-15 02:20:18.000000000 +0200
-+++ linux-2.6.12.5-brcm/drivers/net/b44.c	2005-08-28 11:12:20.691819480 +0200
-@@ -1,7 +1,8 @@
--/* b44.c: Broadcom 4400 device driver.
-+/* b44.c: Broadcom 4400/47xx device driver.
-  *
-  * Copyright (C) 2002 David S. Miller (davem@redhat.com)
-- * Fixed by Pekka Pietikainen (pp@ee.oulu.fi)
-+ * Copyright (C) 2004 Pekka Pietikainen (pp@ee.oulu.fi)
-+ * Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
-  *
-  * Distribute under GPL.
-  */
-@@ -78,7 +79,7 @@
- 	DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
- 
- MODULE_AUTHOR("Florian Schirmer, Pekka Pietikainen, David S. Miller");
--MODULE_DESCRIPTION("Broadcom 4400 10/100 PCI ethernet driver");
-+MODULE_DESCRIPTION("Broadcom 4400/47xx 10/100 PCI ethernet driver");
- MODULE_LICENSE("GPL");
- MODULE_VERSION(DRV_MODULE_VERSION);
- 
-@@ -93,6 +94,8 @@
- 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
- 	{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B1,
- 	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
-+	{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4713,
-+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
- 	{ }	/* terminate list with empty entry */
- };
- 
-@@ -106,24 +109,13 @@
- static void b44_poll_controller(struct net_device *dev);
- #endif
- 
--static inline unsigned long br32(const struct b44 *bp, unsigned long reg)
--{
--	return readl(bp->regs + reg);
--}
--
--static inline void bw32(const struct b44 *bp, 
--			unsigned long reg, unsigned long val)
--{
--	writel(val, bp->regs + reg);
--}
--
- static int b44_wait_bit(struct b44 *bp, unsigned long reg,
- 			u32 bit, unsigned long timeout, const int clear)
- {
- 	unsigned long i;
- 
- 	for (i = 0; i < timeout; i++) {
--		u32 val = br32(bp, reg);
-+		u32 val = br32(reg);
- 
- 		if (clear && !(val & bit))
- 			break;
-@@ -154,7 +146,7 @@
- 
- static u32 ssb_get_core_rev(struct b44 *bp)
- {
--	return (br32(bp, B44_SBIDHIGH) & SBIDHIGH_RC_MASK);
-+	return (br32(B44_SBIDHIGH) & SBIDHIGH_RC_MASK);
- }
- 
- static u32 ssb_pci_setup(struct b44 *bp, u32 cores)
-@@ -165,13 +157,13 @@
- 	pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, BCM4400_PCI_CORE_ADDR);
- 	pci_rev = ssb_get_core_rev(bp);
- 
--	val = br32(bp, B44_SBINTVEC);
-+	val = br32(B44_SBINTVEC);
- 	val |= cores;
--	bw32(bp, B44_SBINTVEC, val);
-+	bw32(B44_SBINTVEC, val);
- 
--	val = br32(bp, SSB_PCI_TRANS_2);
-+	val = br32(SSB_PCI_TRANS_2);
- 	val |= SSB_PCI_PREF | SSB_PCI_BURST;
--	bw32(bp, SSB_PCI_TRANS_2, val);
-+	bw32(SSB_PCI_TRANS_2, val);
- 
- 	pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, bar_orig);
- 
-@@ -180,18 +172,18 @@
- 
- static void ssb_core_disable(struct b44 *bp)
- {
--	if (br32(bp, B44_SBTMSLOW) & SBTMSLOW_RESET)
-+	if (br32(B44_SBTMSLOW) & SBTMSLOW_RESET)
- 		return;
- 
--	bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_CLOCK));
-+	bw32(B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_CLOCK));
- 	b44_wait_bit(bp, B44_SBTMSLOW, SBTMSLOW_REJECT, 100000, 0);
- 	b44_wait_bit(bp, B44_SBTMSHIGH, SBTMSHIGH_BUSY, 100000, 1);
--	bw32(bp, B44_SBTMSLOW, (SBTMSLOW_FGC | SBTMSLOW_CLOCK |
-+	bw32(B44_SBTMSLOW, (SBTMSLOW_FGC | SBTMSLOW_CLOCK |
- 			    SBTMSLOW_REJECT | SBTMSLOW_RESET));
--	br32(bp, B44_SBTMSLOW);
-+	br32(B44_SBTMSLOW);
- 	udelay(1);
--	bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_RESET));
--	br32(bp, B44_SBTMSLOW);
-+	bw32(B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_RESET));
-+	br32(B44_SBTMSLOW);
- 	udelay(1);
- }
- 
-@@ -200,58 +192,65 @@
- 	u32 val;
- 
- 	ssb_core_disable(bp);
--	bw32(bp, B44_SBTMSLOW, (SBTMSLOW_RESET | SBTMSLOW_CLOCK | SBTMSLOW_FGC));
--	br32(bp, B44_SBTMSLOW);
-+	bw32(B44_SBTMSLOW, (SBTMSLOW_RESET | SBTMSLOW_CLOCK | SBTMSLOW_FGC));
-+	br32(B44_SBTMSLOW);
- 	udelay(1);
- 
- 	/* Clear SERR if set, this is a hw bug workaround.  */
--	if (br32(bp, B44_SBTMSHIGH) & SBTMSHIGH_SERR)
--		bw32(bp, B44_SBTMSHIGH, 0);
-+	if (br32(B44_SBTMSHIGH) & SBTMSHIGH_SERR)
-+		bw32(B44_SBTMSHIGH, 0);
- 
--	val = br32(bp, B44_SBIMSTATE);
-+	val = br32(B44_SBIMSTATE);
- 	if (val & (SBIMSTATE_IBE | SBIMSTATE_TO))
--		bw32(bp, B44_SBIMSTATE, val & ~(SBIMSTATE_IBE | SBIMSTATE_TO));
-+		bw32(B44_SBIMSTATE, val & ~(SBIMSTATE_IBE | SBIMSTATE_TO));
- 
--	bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK | SBTMSLOW_FGC));
--	br32(bp, B44_SBTMSLOW);
-+	bw32(B44_SBTMSLOW, (SBTMSLOW_CLOCK | SBTMSLOW_FGC));
-+	br32(B44_SBTMSLOW);
- 	udelay(1);
- 
--	bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK));
--	br32(bp, B44_SBTMSLOW);
-+	bw32(B44_SBTMSLOW, (SBTMSLOW_CLOCK));
-+	br32(B44_SBTMSLOW);
- 	udelay(1);
- }
- 
-+static int b44_4713_instance;
++#endif	/* _SBMIPS_H */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbpci.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbpci.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/sbpci.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbpci.h	2005-09-16 10:29:18.209586624 +0200
+@@ -0,0 +1,113 @@
++/*
++ * BCM47XX Sonics SiliconBackplane PCI core hardware definitions.
++ *
++ * $Id$
++ * Copyright 2001-2003, Broadcom Corporation   
++ * All Rights Reserved.   
++ *    
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
++ */
 +
- static int ssb_core_unit(struct b44 *bp)
- {
--#if 0
--	u32 val = br32(bp, B44_SBADMATCH0);
--	u32 base;
--
--	type = val & SBADMATCH0_TYPE_MASK;
--	switch (type) {
--	case 0:
--		base = val & SBADMATCH0_BS0_MASK;
--		break;
--
--	case 1:
--		base = val & SBADMATCH0_BS1_MASK;
--		break;
--
--	case 2:
--	default:
--		base = val & SBADMATCH0_BS2_MASK;
--		break;
--	};
--#endif
--	return 0;
-+	if (bp->pdev->device == PCI_DEVICE_ID_BCM4713)
-+		return b44_4713_instance++;
-+	else
-+		return 0;
- }
- 
- static int ssb_is_core_up(struct b44 *bp)
- {
--	return ((br32(bp, B44_SBTMSLOW) & (SBTMSLOW_RESET | SBTMSLOW_REJECT | SBTMSLOW_CLOCK))
-+	return ((br32(B44_SBTMSLOW) & (SBTMSLOW_RESET | SBTMSLOW_REJECT | SBTMSLOW_CLOCK))
- 		== SBTMSLOW_CLOCK);
- }
- 
-+static void __b44_cam_read(struct b44 *bp, unsigned char *data, int index)
-+{
-+	u32 val;
++#ifndef	_SBPCI_H
++#define	_SBPCI_H
 +
-+	bw32(B44_CAM_CTRL, (CAM_CTRL_READ |
-+			    (index << CAM_CTRL_INDEX_SHIFT)));
++/* cpp contortions to concatenate w/arg prescan */
++#ifndef PAD
++#define	_PADLINE(line)	pad ## line
++#define	_XSTR(line)	_PADLINE(line)
++#define	PAD		_XSTR(__LINE__)
++#endif
 +
-+	b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1);	
++/* Sonics side: PCI core and host control registers */
++typedef struct sbpciregs {
++	uint32 control;		/* PCI control */
++	uint32 PAD[3];
++	uint32 arbcontrol;	/* PCI arbiter control */
++	uint32 PAD[3];
++	uint32 intstatus;	/* Interrupt status */
++	uint32 intmask;		/* Interrupt mask */
++	uint32 sbtopcimailbox;	/* Sonics to PCI mailbox */
++	uint32 PAD[9];
++	uint32 bcastaddr;	/* Sonics broadcast address */
++	uint32 bcastdata;	/* Sonics broadcast data */
++	uint32 PAD[2];
++	uint32 gpioin;		/* ro: gpio input (>=rev2) */
++	uint32 gpioout;		/* rw: gpio output (>=rev2) */
++	uint32 gpioouten;	/* rw: gpio output enable (>= rev2) */
++	uint32 gpiocontrol;	/* rw: gpio control (>= rev2) */
++	uint32 PAD[36];
++	uint32 sbtopci0;	/* Sonics to PCI translation 0 */
++	uint32 sbtopci1;	/* Sonics to PCI translation 1 */
++	uint32 sbtopci2;	/* Sonics to PCI translation 2 */
++	uint32 PAD[445];
++	uint16 sprom[36];	/* SPROM shadow Area */
++	uint32 PAD[46];
++} sbpciregs_t;
 +
-+	val = br32(B44_CAM_DATA_LO);
++/* PCI control */
++#define PCI_RST_OE	0x01	/* When set, drives PCI_RESET out to pin */
++#define PCI_RST		0x02	/* Value driven out to pin */
++#define PCI_CLK_OE	0x04	/* When set, drives clock as gated by PCI_CLK out to pin */
++#define PCI_CLK		0x08	/* Gate for clock driven out to pin */	
 +
-+	data[2] = (val >> 24) & 0xFF;
-+	data[3] = (val >> 16) & 0xFF;
-+	data[4] = (val >> 8) & 0xFF;
-+	data[5] = (val >> 0) & 0xFF;
++/* PCI arbiter control */
++#define PCI_INT_ARB	0x01	/* When set, use an internal arbiter */
++#define PCI_EXT_ARB	0x02	/* When set, use an external arbiter */
++#define PCI_PARKID_MASK	0x06	/* Selects which agent is parked on an idle bus */
++#define PCI_PARKID_SHIFT   1
++#define PCI_PARKID_LAST	   0	/* Last requestor */
++#define PCI_PARKID_4710	   1	/* 4710 */
++#define PCI_PARKID_EXTREQ0 2	/* External requestor 0 */
++#define PCI_PARKID_EXTREQ1 3	/* External requestor 1 */
 +
-+	val = br32(B44_CAM_DATA_HI);
-+	
-+	data[0] = (val >> 8) & 0xFF;
-+	data[1] = (val >> 0) & 0xFF;
-+}
++/* Interrupt status/mask */
++#define PCI_INTA	0x01	/* PCI INTA# is asserted */
++#define PCI_INTB	0x02	/* PCI INTB# is asserted */
++#define PCI_SERR	0x04	/* PCI SERR# has been asserted (write one to clear) */
++#define PCI_PERR	0x08	/* PCI PERR# has been asserted (write one to clear) */
++#define PCI_PME		0x10	/* PCI PME# is asserted */
 +
- static void __b44_cam_write(struct b44 *bp, unsigned char *data, int index)
- {
- 	u32 val;
-@@ -260,19 +259,19 @@
- 	val |= ((u32) data[3]) << 16;
- 	val |= ((u32) data[4]) <<  8;
- 	val |= ((u32) data[5]) <<  0;
--	bw32(bp, B44_CAM_DATA_LO, val);
-+	bw32(B44_CAM_DATA_LO, val);
- 	val = (CAM_DATA_HI_VALID | 
- 	       (((u32) data[0]) << 8) |
- 	       (((u32) data[1]) << 0));
--	bw32(bp, B44_CAM_DATA_HI, val);
--	bw32(bp, B44_CAM_CTRL, (CAM_CTRL_WRITE |
-+	bw32(B44_CAM_DATA_HI, val);
-+	bw32(B44_CAM_CTRL, (CAM_CTRL_WRITE |
- 			    (index << CAM_CTRL_INDEX_SHIFT)));
- 	b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1);	
- }
- 
- static inline void __b44_disable_ints(struct b44 *bp)
- {
--	bw32(bp, B44_IMASK, 0);
-+	bw32(B44_IMASK, 0);
- }
- 
- static void b44_disable_ints(struct b44 *bp)
-@@ -280,34 +279,40 @@
- 	__b44_disable_ints(bp);
- 
- 	/* Flush posted writes. */
--	br32(bp, B44_IMASK);
-+	br32(B44_IMASK);
- }
- 
- static void b44_enable_ints(struct b44 *bp)
- {
--	bw32(bp, B44_IMASK, bp->imask);
-+	bw32(B44_IMASK, bp->imask);
- }
- 
- static int b44_readphy(struct b44 *bp, int reg, u32 *val)
- {
- 	int err;
- 
--	bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII);
--	bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START |
-+	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
-+		return 0;
++/* (General) PCI/SB mailbox interrupts, two bits per pci function */
++#define	MAILBOX_F0_0	0x100	/* function 0, int 0 */
++#define	MAILBOX_F0_1	0x200	/* function 0, int 1 */
++#define	MAILBOX_F1_0	0x400	/* function 1, int 0 */
++#define	MAILBOX_F1_1	0x800	/* function 1, int 1 */
++#define	MAILBOX_F2_0	0x1000	/* function 2, int 0 */
++#define	MAILBOX_F2_1	0x2000	/* function 2, int 1 */
++#define	MAILBOX_F3_0	0x4000	/* function 3, int 0 */
++#define	MAILBOX_F3_1	0x8000	/* function 3, int 1 */
 +
-+	bw32(B44_EMAC_ISTAT, EMAC_INT_MII);
-+	bw32(B44_MDIO_DATA, (MDIO_DATA_SB_START |
- 			     (MDIO_OP_READ << MDIO_DATA_OP_SHIFT) |
- 			     (bp->phy_addr << MDIO_DATA_PMD_SHIFT) |
- 			     (reg << MDIO_DATA_RA_SHIFT) |
- 			     (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT)));
- 	err = b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0);
--	*val = br32(bp, B44_MDIO_DATA) & MDIO_DATA_DATA;
-+	*val = br32(B44_MDIO_DATA) & MDIO_DATA_DATA;
- 
- 	return err;
- }
- 
- static int b44_writephy(struct b44 *bp, int reg, u32 val)
- {
--	bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII);
--	bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START |
-+	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
-+		return 0;
++/* Sonics broadcast address */
++#define BCAST_ADDR_MASK	0xff	/* Broadcast register address */
 +
-+	bw32(B44_EMAC_ISTAT, EMAC_INT_MII);
-+	bw32(B44_MDIO_DATA, (MDIO_DATA_SB_START |
- 			     (MDIO_OP_WRITE << MDIO_DATA_OP_SHIFT) |
- 			     (bp->phy_addr << MDIO_DATA_PMD_SHIFT) |
- 			     (reg << MDIO_DATA_RA_SHIFT) |
-@@ -344,6 +349,9 @@
- 	u32 val;
- 	int err;
- 
-+	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
-+		return 0;
++/* Sonics to PCI translation types */
++#define SBTOPCI0_MASK	0xfc000000
++#define SBTOPCI1_MASK	0xfc000000
++#define SBTOPCI2_MASK	0xc0000000
++#define SBTOPCI_MEM	0
++#define SBTOPCI_IO	1
++#define SBTOPCI_CFG0	2
++#define SBTOPCI_CFG1	3
++#define	SBTOPCI_PREF	0x4	/* prefetch enable */
++#define	SBTOPCI_BURST	0x8	/* burst enable */
 +
- 	err = b44_writephy(bp, MII_BMCR, BMCR_RESET);
- 	if (err)
- 		return err;
-@@ -367,20 +375,20 @@
- 	bp->flags &= ~(B44_FLAG_TX_PAUSE | B44_FLAG_RX_PAUSE);
- 	bp->flags |= pause_flags;
- 
--	val = br32(bp, B44_RXCONFIG);
-+	val = br32(B44_RXCONFIG);
- 	if (pause_flags & B44_FLAG_RX_PAUSE)
- 		val |= RXCONFIG_FLOW;
- 	else
- 		val &= ~RXCONFIG_FLOW;
--	bw32(bp, B44_RXCONFIG, val);
-+	bw32(B44_RXCONFIG, val);
- 
--	val = br32(bp, B44_MAC_FLOW);
-+	val = br32(B44_MAC_FLOW);
- 	if (pause_flags & B44_FLAG_TX_PAUSE)
- 		val |= (MAC_FLOW_PAUSE_ENAB |
- 			(0xc0 & MAC_FLOW_RX_HI_WATER));
- 	else
- 		val &= ~MAC_FLOW_PAUSE_ENAB;
--	bw32(bp, B44_MAC_FLOW, val);
-+	bw32(B44_MAC_FLOW, val);
- }
- 
- static void b44_set_flow_ctrl(struct b44 *bp, u32 local, u32 remote)
-@@ -414,6 +422,9 @@
- 	u32 val;
- 	int err;
- 
-+	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
-+		return 0;
++/* PCI side: Reserved PCI configuration registers (see pcicfg.h) */
++#define cap_list	rsvd_a[0]
++#define bar0_window	dev_dep[0x80 - 0x40]
++#define bar1_window	dev_dep[0x84 - 0x40]
++#define sprom_control	dev_dep[0x88 - 0x40]
 +
- 	if ((err = b44_readphy(bp, B44_MII_ALEDCTRL, &val)) != 0)
- 		goto out;
- 	if ((err = b44_writephy(bp, B44_MII_ALEDCTRL,
-@@ -476,11 +487,11 @@
- 
- 	val = &bp->hw_stats.tx_good_octets;
- 	for (reg = B44_TX_GOOD_O; reg <= B44_TX_PAUSE; reg += 4UL) {
--		*val++ += br32(bp, reg);
-+		*val++ += br32(reg);
- 	}
- 	val = &bp->hw_stats.rx_good_octets;
- 	for (reg = B44_RX_GOOD_O; reg <= B44_RX_NPAUSE; reg += 4UL) {
--		*val++ += br32(bp, reg);
-+		*val++ += br32(reg);
- 	}
- }
- 
-@@ -506,6 +517,19 @@
- {
- 	u32 bmsr, aux;
- 
-+	if (bp->phy_addr == B44_PHY_ADDR_NO_PHY) {
-+		bp->flags |= B44_FLAG_100_BASE_T;
-+		bp->flags |= B44_FLAG_FULL_DUPLEX;
-+		if (!netif_carrier_ok(bp->dev)) {
-+			u32 val = br32(B44_TX_CTRL);
-+			val |= TX_CTRL_DUPLEX;
-+			bw32(B44_TX_CTRL, val);
-+			netif_carrier_on(bp->dev);
-+			b44_link_report(bp);
-+		}
-+		return;
-+	}
++#ifndef _LANGUAGE_ASSEMBLY
 +
- 	if (!b44_readphy(bp, MII_BMSR, &bmsr) &&
- 	    !b44_readphy(bp, B44_MII_AUXCTRL, &aux) &&
- 	    (bmsr != 0xffff)) {
-@@ -520,14 +544,14 @@
- 
- 		if (!netif_carrier_ok(bp->dev) &&
- 		    (bmsr & BMSR_LSTATUS)) {
--			u32 val = br32(bp, B44_TX_CTRL);
-+			u32 val = br32(B44_TX_CTRL);
- 			u32 local_adv, remote_adv;
- 
- 			if (bp->flags & B44_FLAG_FULL_DUPLEX)
- 				val |= TX_CTRL_DUPLEX;
- 			else
- 				val &= ~TX_CTRL_DUPLEX;
--			bw32(bp, B44_TX_CTRL, val);
-+			bw32(B44_TX_CTRL, val);
- 
- 			if (!(bp->flags & B44_FLAG_FORCE_LINK) &&
- 			    !b44_readphy(bp, MII_ADVERTISE, &local_adv) &&
-@@ -572,7 +596,7 @@
- {
- 	u32 cur, cons;
- 
--	cur  = br32(bp, B44_DMATX_STAT) & DMATX_STAT_CDMASK;
-+	cur  = br32(B44_DMATX_STAT) & DMATX_STAT_CDMASK;
- 	cur /= sizeof(struct dma_desc);
- 
- 	/* XXX needs updating when NETIF_F_SG is supported */
-@@ -596,7 +620,7 @@
- 	    TX_BUFFS_AVAIL(bp) > B44_TX_WAKEUP_THRESH)
- 		netif_wake_queue(bp->dev);
- 
--	bw32(bp, B44_GPTIMER, 0);
-+	bw32(B44_GPTIMER, 0);
- }
- 
- /* Works like this.  This chip writes a 'struct rx_header" 30 bytes
-@@ -713,7 +737,7 @@
- 	u32 cons, prod;
- 
- 	received = 0;
--	prod  = br32(bp, B44_DMARX_STAT) & DMARX_STAT_CDMASK;
-+	prod  = br32(B44_DMARX_STAT) & DMARX_STAT_CDMASK;
- 	prod /= sizeof(struct dma_desc);
- 	cons = bp->rx_cons;
- 
-@@ -792,7 +816,7 @@
- 	}
- 
- 	bp->rx_cons = cons;
--	bw32(bp, B44_DMARX_PTR, cons * sizeof(struct dma_desc));
-+	bw32(B44_DMARX_PTR, cons * sizeof(struct dma_desc));
- 
- 	return received;
- }
-@@ -856,8 +880,8 @@
- 
- 	spin_lock_irqsave(&bp->lock, flags);
- 
--	istat = br32(bp, B44_ISTAT);
--	imask = br32(bp, B44_IMASK);
-+	istat = br32(B44_ISTAT);
-+	imask = br32(B44_IMASK);
- 
- 	/* ??? What the fuck is the purpose of the interrupt mask
- 	 * ??? register if we have to mask it out by hand anyways?
-@@ -877,8 +901,8 @@
- 			       dev->name);
- 		}
- 
--		bw32(bp, B44_ISTAT, istat);
--		br32(bp, B44_ISTAT);
-+		bw32(B44_ISTAT, istat);
-+		br32(B44_ISTAT);
- 	}
- 	spin_unlock_irqrestore(&bp->lock, flags);
- 	return IRQ_RETVAL(handled);
-@@ -965,11 +989,11 @@
- 
- 	wmb();
- 
--	bw32(bp, B44_DMATX_PTR, entry * sizeof(struct dma_desc));
-+	bw32(B44_DMATX_PTR, entry * sizeof(struct dma_desc));
- 	if (bp->flags & B44_FLAG_BUGGY_TXPTR)
--		bw32(bp, B44_DMATX_PTR, entry * sizeof(struct dma_desc));
-+		bw32(B44_DMATX_PTR, entry * sizeof(struct dma_desc));
- 	if (bp->flags & B44_FLAG_REORDER_BUG)
--		br32(bp, B44_DMATX_PTR);
-+		br32(B44_DMATX_PTR);
- 
- 	if (TX_BUFFS_AVAIL(bp) < 1)
- 		netif_stop_queue(dev);
-@@ -1137,32 +1161,35 @@
- {
- 	unsigned long reg;
- 
--	bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
-+	bw32(B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
- 	for (reg = B44_TX_GOOD_O; reg <= B44_TX_PAUSE; reg += 4UL)
--		br32(bp, reg);
-+		br32(reg);
- 	for (reg = B44_RX_GOOD_O; reg <= B44_RX_NPAUSE; reg += 4UL)
--		br32(bp, reg);
-+		br32(reg);
- }
- 
- /* bp->lock is held. */
- static void b44_chip_reset(struct b44 *bp)
- {
-+	unsigned int sb_clock;
-+
- 	if (ssb_is_core_up(bp)) {
--		bw32(bp, B44_RCV_LAZY, 0);
--		bw32(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE);
-+		bw32(B44_RCV_LAZY, 0);
-+		bw32(B44_ENET_CTRL, ENET_CTRL_DISABLE);
- 		b44_wait_bit(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE, 100, 1);
--		bw32(bp, B44_DMATX_CTRL, 0);
-+		bw32(B44_DMATX_CTRL, 0);
- 		bp->tx_prod = bp->tx_cons = 0;
--		if (br32(bp, B44_DMARX_STAT) & DMARX_STAT_EMASK) {
-+		if (br32(B44_DMARX_STAT) & DMARX_STAT_EMASK) {
- 			b44_wait_bit(bp, B44_DMARX_STAT, DMARX_STAT_SIDLE,
- 				     100, 0);
- 		}
--		bw32(bp, B44_DMARX_CTRL, 0);
-+		bw32(B44_DMARX_CTRL, 0);
- 		bp->rx_prod = bp->rx_cons = 0;
- 	} else {
--		ssb_pci_setup(bp, (bp->core_unit == 0 ?
--				   SBINTVEC_ENET0 :
--				   SBINTVEC_ENET1));
-+		if (bp->pdev->device != PCI_DEVICE_ID_BCM4713)
-+			ssb_pci_setup(bp, (bp->core_unit == 0 ?
-+					   SBINTVEC_ENET0 :
-+					   SBINTVEC_ENET1));
- 	}
- 
- 	ssb_core_reset(bp);
-@@ -1170,20 +1197,26 @@
- 	b44_clear_stats(bp);
- 
- 	/* Make PHY accessible. */
--	bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
--			     (0x0d & MDIO_CTRL_MAXF_MASK)));
--	br32(bp, B44_MDIO_CTRL);
--
--	if (!(br32(bp, B44_DEVCTRL) & DEVCTRL_IPP)) {
--		bw32(bp, B44_ENET_CTRL, ENET_CTRL_EPSEL);
--		br32(bp, B44_ENET_CTRL);
-+	if (bp->pdev->device == PCI_DEVICE_ID_BCM4713)
-+		sb_clock = 100000000; /* 100 MHz */
-+	else
-+		sb_clock = 62500000; /* 62.5 MHz */
-+
-+	bw32(B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
-+			     (((sb_clock + (B44_MDC_RATIO / 2)) / B44_MDC_RATIO)
-+			     & MDIO_CTRL_MAXF_MASK)));
-+	br32(B44_MDIO_CTRL);
-+
-+	if (!(br32(B44_DEVCTRL) & DEVCTRL_IPP)) {
-+		bw32(B44_ENET_CTRL, ENET_CTRL_EPSEL);
-+		br32(B44_ENET_CTRL);
- 		bp->flags &= ~B44_FLAG_INTERNAL_PHY;
- 	} else {
--		u32 val = br32(bp, B44_DEVCTRL);
-+		u32 val = br32(B44_DEVCTRL);
- 
- 		if (val & DEVCTRL_EPR) {
--			bw32(bp, B44_DEVCTRL, (val & ~DEVCTRL_EPR));
--			br32(bp, B44_DEVCTRL);
-+			bw32(B44_DEVCTRL, (val & ~DEVCTRL_EPR));
-+			br32(B44_DEVCTRL);
- 			udelay(100);
- 		}
- 		bp->flags |= B44_FLAG_INTERNAL_PHY;
-@@ -1200,13 +1233,13 @@
- /* bp->lock is held. */
- static void __b44_set_mac_addr(struct b44 *bp)
- {
--	bw32(bp, B44_CAM_CTRL, 0);
-+	bw32(B44_CAM_CTRL, 0);
- 	if (!(bp->dev->flags & IFF_PROMISC)) {
- 		u32 val;
- 
- 		__b44_cam_write(bp, bp->dev->dev_addr, 0);
--		val = br32(bp, B44_CAM_CTRL);
--		bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
-+		val = br32(B44_CAM_CTRL);
-+		bw32(B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
- 	}
- }
- 
-@@ -1240,30 +1273,30 @@
- 	b44_setup_phy(bp);
- 
- 	/* Enable CRC32, set proper LED modes and power on PHY */
--	bw32(bp, B44_MAC_CTRL, MAC_CTRL_CRC32_ENAB | MAC_CTRL_PHY_LEDCTRL);
--	bw32(bp, B44_RCV_LAZY, (1 << RCV_LAZY_FC_SHIFT));
-+	bw32(B44_MAC_CTRL, MAC_CTRL_CRC32_ENAB | MAC_CTRL_PHY_LEDCTRL);
-+	bw32(B44_RCV_LAZY, (1 << RCV_LAZY_FC_SHIFT));
- 
- 	/* This sets the MAC address too.  */
- 	__b44_set_rx_mode(bp->dev);
- 
- 	/* MTU + eth header + possible VLAN tag + struct rx_header */
--	bw32(bp, B44_RXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
--	bw32(bp, B44_TXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
-+	bw32(B44_RXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
-+	bw32(B44_TXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
- 
--	bw32(bp, B44_TX_WMARK, 56); /* XXX magic */
--	bw32(bp, B44_DMATX_CTRL, DMATX_CTRL_ENABLE);
--	bw32(bp, B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset);
--	bw32(bp, B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
-+	bw32(B44_TX_WMARK, 56); /* XXX magic */
-+	bw32(B44_DMATX_CTRL, DMATX_CTRL_ENABLE);
-+	bw32(B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset);
-+	bw32(B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
- 			      (bp->rx_offset << DMARX_CTRL_ROSHIFT)));
--	bw32(bp, B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset);
-+	bw32(B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset);
- 
--	bw32(bp, B44_DMARX_PTR, bp->rx_pending);
-+	bw32(B44_DMARX_PTR, bp->rx_pending);
- 	bp->rx_prod = bp->rx_pending;	
- 
--	bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
-+	bw32(B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
- 
--	val = br32(bp, B44_ENET_CTRL);
--	bw32(bp, B44_ENET_CTRL, (val | ENET_CTRL_ENABLE));
-+	val = br32(B44_ENET_CTRL);
-+	bw32(B44_ENET_CTRL, (val | ENET_CTRL_ENABLE));
- }
- 
- static int b44_open(struct net_device *dev)
-@@ -1416,11 +1449,11 @@
- 	int i=0;
- 	unsigned char zero[6] = {0,0,0,0,0,0};
- 
--	val = br32(bp, B44_RXCONFIG);
-+	val = br32(B44_RXCONFIG);
- 	val &= ~(RXCONFIG_PROMISC | RXCONFIG_ALLMULTI);
- 	if (dev->flags & IFF_PROMISC) {
- 		val |= RXCONFIG_PROMISC;
--		bw32(bp, B44_RXCONFIG, val);
-+		bw32(B44_RXCONFIG, val);
- 	} else {
- 		__b44_set_mac_addr(bp);
- 
-@@ -1432,9 +1465,9 @@
- 		for(;i<64;i++) {
- 			__b44_cam_write(bp, zero, i);			
- 		}
--		bw32(bp, B44_RXCONFIG, val);
--        	val = br32(bp, B44_CAM_CTRL);
--	        bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
-+		bw32(B44_RXCONFIG, val);
-+        	val = br32(B44_CAM_CTRL);
-+	        bw32(B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
- 	}
- }
- 
-@@ -1704,19 +1737,41 @@
- {
- 	u8 eeprom[128];
- 	int err;
-+	unsigned long flags;
- 
--	err = b44_read_eeprom(bp, &eeprom[0]);
--	if (err)
--		goto out;
--
--	bp->dev->dev_addr[0] = eeprom[79];
--	bp->dev->dev_addr[1] = eeprom[78];
--	bp->dev->dev_addr[2] = eeprom[81];
--	bp->dev->dev_addr[3] = eeprom[80];
--	bp->dev->dev_addr[4] = eeprom[83];
--	bp->dev->dev_addr[5] = eeprom[82];
--
--	bp->phy_addr = eeprom[90] & 0x1f;
-+	if (bp->pdev->device == PCI_DEVICE_ID_BCM4713) {
-+		/* 
-+		 * BCM47xx boards don't have a EEPROM. The MAC is stored in
-+		 * a NVRAM area somewhere in the flash memory. As we don't
-+		 * know the location and/or the format of the NVRAM area
-+		 * here, we simply rely on the bootloader to write the
-+		 * MAC into the CAM.
-+		 */
-+		spin_lock_irqsave(&bp->lock, flags);
-+		__b44_cam_read(bp, bp->dev->dev_addr, 0);
-+		spin_unlock_irqrestore(&bp->lock, flags);
++extern int sbpci_read_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len);
++extern int sbpci_write_config(void *sbh, uint bus, uint dev, uint func, uint off, void *buf, int len);
++extern void sbpci_ban(uint16 core);
++extern int sbpci_init(void *sbh);
++extern void sbpci_check(void *sbh);
 +
-+		/* 
-+		 * BCM47xx boards don't have a PHY. Usually there is a switch
-+		 * chip with multiple PHYs connected to the PHY port.
-+		 */
-+		bp->phy_addr = B44_PHY_ADDR_NO_PHY;
-+		bp->dma_offset = 0;
-+	} else {
-+		err = b44_read_eeprom(bp, &eeprom[0]);
-+		if (err)
-+			return err;
-+
-+		bp->dev->dev_addr[0] = eeprom[79];
-+		bp->dev->dev_addr[1] = eeprom[78];
-+		bp->dev->dev_addr[2] = eeprom[81];
-+		bp->dev->dev_addr[3] = eeprom[80];
-+		bp->dev->dev_addr[4] = eeprom[83];
-+		bp->dev->dev_addr[5] = eeprom[82];
-+
-+		bp->phy_addr = eeprom[90] & 0x1f;
-+		bp->dma_offset = SB_PCI_DMA;
-+	} 
- 
- 	/* With this, plus the rx_header prepended to the data by the
- 	 * hardware, we'll land the ethernet header on a 2-byte boundary.
-@@ -1726,13 +1781,12 @@
- 	bp->imask = IMASK_DEF;
- 
- 	bp->core_unit = ssb_core_unit(bp);
--	bp->dma_offset = SB_PCI_DMA;
- 
- 	/* XXX - really required? 
- 	   bp->flags |= B44_FLAG_BUGGY_TXPTR;
-          */
--out:
--	return err;
++#endif /* !_LANGUAGE_ASSEMBLY */
 +
-+	return 0;
- }
- 
- static int __devinit b44_init_one(struct pci_dev *pdev,
-@@ -1810,7 +1864,7 @@
- 
- 	spin_lock_init(&bp->lock);
- 
--	bp->regs = ioremap(b44reg_base, b44reg_len);
-+	bp->regs = (unsigned long) ioremap(b44reg_base, b44reg_len);
- 	if (bp->regs == 0UL) {
- 		printk(KERN_ERR PFX "Cannot map device registers, "
- 		       "aborting.\n");
-@@ -1871,7 +1925,8 @@
- 
- 	pci_save_state(bp->pdev);
- 
--	printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name);
-+	printk(KERN_INFO "%s: Broadcom %s 10/100BaseT Ethernet ", dev->name,
-+		(pdev->device == PCI_DEVICE_ID_BCM4713) ? "47xx" : "4400");
- 	for (i = 0; i < 6; i++)
- 		printk("%2.2x%c", dev->dev_addr[i],
- 		       i == 5 ? '\n' : ':');
-@@ -1879,7 +1934,7 @@
- 	return 0;
- 
- err_out_iounmap:
--	iounmap(bp->regs);
-+	iounmap((void *) bp->regs);
- 
- err_out_free_dev:
- 	free_netdev(dev);
-@@ -1901,7 +1956,7 @@
- 		struct b44 *bp = netdev_priv(dev);
- 
- 		unregister_netdev(dev);
--		iounmap(bp->regs);
-+		iounmap((void *) bp->regs);
- 		free_netdev(dev);
- 		pci_release_regions(pdev);
- 		pci_disable_device(pdev);
-diff -Nur linux-2.6.12.5/drivers/net/b44.c.orig linux-2.6.12.5-brcm/drivers/net/b44.c.orig
---- linux-2.6.12.5/drivers/net/b44.c.orig	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/drivers/net/b44.c.orig	2005-08-15 02:20:18.000000000 +0200
-@@ -0,0 +1,1978 @@
-+/* b44.c: Broadcom 4400 device driver.
-+ *
-+ * Copyright (C) 2002 David S. Miller (davem@redhat.com)
-+ * Fixed by Pekka Pietikainen (pp@ee.oulu.fi)
++#endif	/* _SBPCI_H */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbpcmcia.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbpcmcia.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/sbpcmcia.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbpcmcia.h	2005-09-16 10:29:18.210586472 +0200
+@@ -0,0 +1,131 @@
++/*
++ * BCM43XX Sonics SiliconBackplane PCMCIA core hardware definitions.
 + *
-+ * Distribute under GPL.
++ * $Id$
++ * Copyright 2001-2003, Broadcom Corporation   
++ * All Rights Reserved.   
++ *    
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
 + */
 +
-+#include <linux/kernel.h>
-+#include <linux/module.h>
-+#include <linux/moduleparam.h>
-+#include <linux/types.h>
-+#include <linux/netdevice.h>
-+#include <linux/ethtool.h>
-+#include <linux/mii.h>
-+#include <linux/if_ether.h>
-+#include <linux/etherdevice.h>
-+#include <linux/pci.h>
-+#include <linux/delay.h>
-+#include <linux/init.h>
-+#include <linux/version.h>
++#ifndef	_SBPCMCIA_H
++#define	_SBPCMCIA_H
 +
-+#include <asm/uaccess.h>
-+#include <asm/io.h>
-+#include <asm/irq.h>
 +
-+#include "b44.h"
-+
-+#define DRV_MODULE_NAME		"b44"
-+#define PFX DRV_MODULE_NAME	": "
-+#define DRV_MODULE_VERSION	"0.95"
-+#define DRV_MODULE_RELDATE	"Aug 3, 2004"
-+
-+#define B44_DEF_MSG_ENABLE	  \
-+	(NETIF_MSG_DRV		| \
-+	 NETIF_MSG_PROBE	| \
-+	 NETIF_MSG_LINK		| \
-+	 NETIF_MSG_TIMER	| \
-+	 NETIF_MSG_IFDOWN	| \
-+	 NETIF_MSG_IFUP		| \
-+	 NETIF_MSG_RX_ERR	| \
-+	 NETIF_MSG_TX_ERR)
-+
-+/* length of time before we decide the hardware is borked,
-+ * and dev->tx_timeout() should be called to fix the problem
++/* All the addresses that are offsets in attribute space are divided
++ * by two to account for the fact that odd bytes are invalid in
++ * attribute space and our read/write routines make the space appear
++ * as if they didn't exist. Still we want to show the original numbers
++ * as documented in the hnd_pcmcia core manual.
 + */
-+#define B44_TX_TIMEOUT			(5 * HZ)
-+
-+/* hardware minimum and maximum for a single frame's data payload */
-+#define B44_MIN_MTU			60
-+#define B44_MAX_MTU			1500
-+
-+#define B44_RX_RING_SIZE		512
-+#define B44_DEF_RX_RING_PENDING		200
-+#define B44_RX_RING_BYTES	(sizeof(struct dma_desc) * \
-+				 B44_RX_RING_SIZE)
-+#define B44_TX_RING_SIZE		512
-+#define B44_DEF_TX_RING_PENDING		(B44_TX_RING_SIZE - 1)
-+#define B44_TX_RING_BYTES	(sizeof(struct dma_desc) * \
-+				 B44_TX_RING_SIZE)
-+#define B44_DMA_MASK 0x3fffffff
-+
-+#define TX_RING_GAP(BP)	\
-+	(B44_TX_RING_SIZE - (BP)->tx_pending)
-+#define TX_BUFFS_AVAIL(BP)						\
-+	(((BP)->tx_cons <= (BP)->tx_prod) ?				\
-+	  (BP)->tx_cons + (BP)->tx_pending - (BP)->tx_prod :		\
-+	  (BP)->tx_cons - (BP)->tx_prod - TX_RING_GAP(BP))
-+#define NEXT_TX(N)		(((N) + 1) & (B44_TX_RING_SIZE - 1))
-+
-+#define RX_PKT_BUF_SZ		(1536 + bp->rx_offset + 64)
-+#define TX_PKT_BUF_SZ		(B44_MAX_MTU + ETH_HLEN + 8)
-+
-+/* minimum number of free TX descriptors required to wake up TX process */
-+#define B44_TX_WAKEUP_THRESH		(B44_TX_RING_SIZE / 4)
-+
-+static char version[] __devinitdata =
-+	DRV_MODULE_NAME ".c:v" DRV_MODULE_VERSION " (" DRV_MODULE_RELDATE ")\n";
-+
-+MODULE_AUTHOR("Florian Schirmer, Pekka Pietikainen, David S. Miller");
-+MODULE_DESCRIPTION("Broadcom 4400 10/100 PCI ethernet driver");
-+MODULE_LICENSE("GPL");
-+MODULE_VERSION(DRV_MODULE_VERSION);
-+
-+static int b44_debug = -1;	/* -1 == use B44_DEF_MSG_ENABLE as value */
-+module_param(b44_debug, int, 0);
-+MODULE_PARM_DESC(b44_debug, "B44 bitmapped debugging message enable value");
-+
-+static struct pci_device_id b44_pci_tbl[] = {
-+	{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401,
-+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
-+	{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B0,
-+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
-+	{ PCI_VENDOR_ID_BROADCOM, PCI_DEVICE_ID_BCM4401B1,
-+	  PCI_ANY_ID, PCI_ANY_ID, 0, 0, 0UL },
-+	{ }	/* terminate list with empty entry */
-+};
 +
-+MODULE_DEVICE_TABLE(pci, b44_pci_tbl);
++/* PCMCIA Function Configuration Registers */
++#define	PCMCIA_FCR		(0x700 / 2)
 +
-+static void b44_halt(struct b44 *);
-+static void b44_init_rings(struct b44 *);
-+static void b44_init_hw(struct b44 *);
-+static int b44_poll(struct net_device *dev, int *budget);
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+static void b44_poll_controller(struct net_device *dev);
-+#endif
++#define	FCR0_OFF		0
++#define	FCR1_OFF		(0x40 / 2)
++#define	FCR2_OFF		(0x80 / 2)
++#define	FCR3_OFF		(0xc0 / 2)
 +
-+static inline unsigned long br32(const struct b44 *bp, unsigned long reg)
-+{
-+	return readl(bp->regs + reg);
-+}
++#define	PCMCIA_FCR0		(0x700 / 2)
++#define	PCMCIA_FCR1		(0x740 / 2)
++#define	PCMCIA_FCR2		(0x780 / 2)
++#define	PCMCIA_FCR3		(0x7c0 / 2)
 +
-+static inline void bw32(const struct b44 *bp, 
-+			unsigned long reg, unsigned long val)
-+{
-+	writel(val, bp->regs + reg);
-+}
++/* Standard PCMCIA FCR registers */
 +
-+static int b44_wait_bit(struct b44 *bp, unsigned long reg,
-+			u32 bit, unsigned long timeout, const int clear)
-+{
-+	unsigned long i;
++#define	PCMCIA_COR		0
++
++#define	COR_RST			0x80
++#define	COR_LEV			0x40
++#define	COR_IRQEN		0x04
++#define	COR_BLREN		0x01
++#define	COR_FUNEN		0x01
 +
-+	for (i = 0; i < timeout; i++) {
-+		u32 val = br32(bp, reg);
 +
-+		if (clear && !(val & bit))
-+			break;
-+		if (!clear && (val & bit))
-+			break;
-+		udelay(10);
-+	}
-+	if (i == timeout) {
-+		printk(KERN_ERR PFX "%s: BUG!  Timeout waiting for bit %08x of register "
-+		       "%lx to %s.\n",
-+		       bp->dev->name,
-+		       bit, reg,
-+		       (clear ? "clear" : "set"));
-+		return -ENODEV;
-+	}
-+	return 0;
-+}
++#define	PCICIA_FCSR		(2 / 2)
++#define	PCICIA_PRR		(4 / 2)
++#define	PCICIA_SCR		(6 / 2)
++#define	PCICIA_ESR		(8 / 2)
 +
-+/* Sonics SiliconBackplane support routines.  ROFL, you should see all the
-+ * buzz words used on this company's website :-)
-+ *
-+ * All of these routines must be invoked with bp->lock held and
-+ * interrupts disabled.
-+ */
 +
-+#define SB_PCI_DMA             0x40000000      /* Client Mode PCI memory access space (1 GB) */
-+#define BCM4400_PCI_CORE_ADDR  0x18002000      /* Address of PCI core on BCM4400 cards */
++#define PCM_MEMOFF		0x0000
++#define F0_MEMOFF		0x1000
++#define F1_MEMOFF		0x2000
++#define F2_MEMOFF		0x3000
++#define F3_MEMOFF		0x4000
 +
-+static u32 ssb_get_core_rev(struct b44 *bp)
-+{
-+	return (br32(bp, B44_SBIDHIGH) & SBIDHIGH_RC_MASK);
-+}
++/* Memory base in the function fcr's */
++#define MEM_ADDR0		(0x728 / 2)
++#define MEM_ADDR1		(0x72a / 2)
++#define MEM_ADDR2		(0x72c / 2)
 +
-+static u32 ssb_pci_setup(struct b44 *bp, u32 cores)
-+{
-+	u32 bar_orig, pci_rev, val;
++/* PCMCIA base plus Srom access in fcr0: */
++#define PCMCIA_ADDR0		(0x072e / 2)
++#define PCMCIA_ADDR1		(0x0730 / 2)
++#define PCMCIA_ADDR2		(0x0732 / 2)
 +
-+	pci_read_config_dword(bp->pdev, SSB_BAR0_WIN, &bar_orig);
-+	pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, BCM4400_PCI_CORE_ADDR);
-+	pci_rev = ssb_get_core_rev(bp);
++#define MEM_SEG			(0x0734 / 2)
++#define SROM_CS			(0x0736 / 2)
++#define SROM_DATAL		(0x0738 / 2)
++#define SROM_DATAH		(0x073a / 2)
++#define SROM_ADDRL		(0x073c / 2)
++#define SROM_ADDRH		(0x073e / 2)
 +
-+	val = br32(bp, B44_SBINTVEC);
-+	val |= cores;
-+	bw32(bp, B44_SBINTVEC, val);
++/*  Values for srom_cs: */
++#define SROM_IDLE		0
++#define SROM_WRITE		1
++#define SROM_READ		2
++#define SROM_WEN		4
++#define SROM_WDS		7
++#define SROM_DONE		8
 +
-+	val = br32(bp, SSB_PCI_TRANS_2);
-+	val |= SSB_PCI_PREF | SSB_PCI_BURST;
-+	bw32(bp, SSB_PCI_TRANS_2, val);
++/* CIS stuff */
 +
-+	pci_write_config_dword(bp->pdev, SSB_BAR0_WIN, bar_orig);
++/* The CIS stops where the FCRs start */
++#define	CIS_SIZE		PCMCIA_FCR
 +
-+	return pci_rev;
-+}
++/* Standard tuples we know about */
 +
-+static void ssb_core_disable(struct b44 *bp)
-+{
-+	if (br32(bp, B44_SBTMSLOW) & SBTMSLOW_RESET)
-+		return;
++#define	CISTPL_MANFID		0x20		/* Manufacturer and device id */
++#define	CISTPL_FUNCE		0x22		/* Function extensions */
++#define	CISTPL_CFTABLE		0x1b		/* Config table entry */
 +
-+	bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_CLOCK));
-+	b44_wait_bit(bp, B44_SBTMSLOW, SBTMSLOW_REJECT, 100000, 0);
-+	b44_wait_bit(bp, B44_SBTMSHIGH, SBTMSHIGH_BUSY, 100000, 1);
-+	bw32(bp, B44_SBTMSLOW, (SBTMSLOW_FGC | SBTMSLOW_CLOCK |
-+			    SBTMSLOW_REJECT | SBTMSLOW_RESET));
-+	br32(bp, B44_SBTMSLOW);
-+	udelay(1);
-+	bw32(bp, B44_SBTMSLOW, (SBTMSLOW_REJECT | SBTMSLOW_RESET));
-+	br32(bp, B44_SBTMSLOW);
-+	udelay(1);
-+}
++/* Function extensions for LANs */
 +
-+static void ssb_core_reset(struct b44 *bp)
-+{
-+	u32 val;
++#define	LAN_TECH		1		/* Technology type */
++#define	LAN_SPEED		2		/* Raw bit rate */
++#define	LAN_MEDIA		3		/* Transmission media */
++#define	LAN_NID			4		/* Node identification (aka MAC addr) */
++#define	LAN_CONN		5		/* Connector standard */
 +
-+	ssb_core_disable(bp);
-+	bw32(bp, B44_SBTMSLOW, (SBTMSLOW_RESET | SBTMSLOW_CLOCK | SBTMSLOW_FGC));
-+	br32(bp, B44_SBTMSLOW);
-+	udelay(1);
 +
-+	/* Clear SERR if set, this is a hw bug workaround.  */
-+	if (br32(bp, B44_SBTMSHIGH) & SBTMSHIGH_SERR)
-+		bw32(bp, B44_SBTMSHIGH, 0);
++/* CFTable */
++#define CFTABLE_REGWIN_2K	0x08		/* 2k reg windows size */
++#define CFTABLE_REGWIN_4K	0x10		/* 4k reg windows size */
++#define CFTABLE_REGWIN_8K	0x20		/* 8k reg windows size */
 +
-+	val = br32(bp, B44_SBIMSTATE);
-+	if (val & (SBIMSTATE_IBE | SBIMSTATE_TO))
-+		bw32(bp, B44_SBIMSTATE, val & ~(SBIMSTATE_IBE | SBIMSTATE_TO));
++/* Vendor unique tuples are 0x80-0x8f. Within Broadcom we'll
++ * take one for HNBU, and use "extensions" (a la FUNCE) within it.
++ */
 +
-+	bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK | SBTMSLOW_FGC));
-+	br32(bp, B44_SBTMSLOW);
-+	udelay(1);
++#define	CISTPL_BRCM_HNBU	0x80
 +
-+	bw32(bp, B44_SBTMSLOW, (SBTMSLOW_CLOCK));
-+	br32(bp, B44_SBTMSLOW);
-+	udelay(1);
-+}
++/* Subtypes of BRCM_HNBU: */
 +
-+static int ssb_core_unit(struct b44 *bp)
-+{
-+#if 0
-+	u32 val = br32(bp, B44_SBADMATCH0);
-+	u32 base;
-+
-+	type = val & SBADMATCH0_TYPE_MASK;
-+	switch (type) {
-+	case 0:
-+		base = val & SBADMATCH0_BS0_MASK;
-+		break;
++#define	HNBU_CHIPID		0x01		/* Six bytes with PCI vendor &
++						 * device id and chiprev
++						 */
++#define	HNBU_BOARDREV		0x02		/* Two bytes board revision */
++#define	HNBU_PAPARMS		0x03		/* Eleven bytes PA parameters */
++#define	HNBU_OEM		0x04		/* Eight bytes OEM data */
++#define	HNBU_CC			0x05		/* Default country code */
++#define	HNBU_AA			0x06		/* Antennas available */
++#define	HNBU_AG			0x07		/* Antenna gain */
++#define HNBU_BOARDFLAGS		0x08		/* board flags */
++#define HNBU_LED		0x09		/* LED set */
 +
-+	case 1:
-+		base = val & SBADMATCH0_BS1_MASK;
-+		break;
++#endif	/* _SBPCMCIA_H */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbsdram.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbsdram.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/sbsdram.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbsdram.h	2005-09-16 10:29:18.210586472 +0200
+@@ -0,0 +1,75 @@
++/*
++ * BCM47XX Sonics SiliconBackplane SDRAM controller core hardware definitions.
++ *
++ * Copyright 2001-2003, Broadcom Corporation   
++ * All Rights Reserved.   
++ *    
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
++ * $Id$
++ */
 +
-+	case 2:
-+	default:
-+		base = val & SBADMATCH0_BS2_MASK;
-+		break;
-+	};
-+#endif
-+	return 0;
-+}
++#ifndef	_SBSDRAM_H
++#define	_SBSDRAM_H
 +
-+static int ssb_is_core_up(struct b44 *bp)
-+{
-+	return ((br32(bp, B44_SBTMSLOW) & (SBTMSLOW_RESET | SBTMSLOW_REJECT | SBTMSLOW_CLOCK))
-+		== SBTMSLOW_CLOCK);
-+}
++#ifndef _LANGUAGE_ASSEMBLY
 +
-+static void __b44_cam_write(struct b44 *bp, unsigned char *data, int index)
-+{
-+	u32 val;
-+
-+	val  = ((u32) data[2]) << 24;
-+	val |= ((u32) data[3]) << 16;
-+	val |= ((u32) data[4]) <<  8;
-+	val |= ((u32) data[5]) <<  0;
-+	bw32(bp, B44_CAM_DATA_LO, val);
-+	val = (CAM_DATA_HI_VALID | 
-+	       (((u32) data[0]) << 8) |
-+	       (((u32) data[1]) << 0));
-+	bw32(bp, B44_CAM_DATA_HI, val);
-+	bw32(bp, B44_CAM_CTRL, (CAM_CTRL_WRITE |
-+			    (index << CAM_CTRL_INDEX_SHIFT)));
-+	b44_wait_bit(bp, B44_CAM_CTRL, CAM_CTRL_BUSY, 100, 1);	
-+}
++/* Sonics side: SDRAM core registers */
++typedef volatile struct sbsdramregs {
++	uint32	initcontrol;	/* Generates external SDRAM initialization sequence */
++	uint32	config;		/* Initializes external SDRAM mode register */
++	uint32	refresh;	/* Controls external SDRAM refresh rate */
++	uint32	pad1;
++	uint32	pad2;
++} sbsdramregs_t;
 +
-+static inline void __b44_disable_ints(struct b44 *bp)
-+{
-+	bw32(bp, B44_IMASK, 0);
-+}
++#endif
 +
-+static void b44_disable_ints(struct b44 *bp)
-+{
-+	__b44_disable_ints(bp);
++/* SDRAM initialization control (initcontrol) register bits */
++#define SDRAM_CBR	0x0001	/* Writing 1 generates refresh cycle and toggles bit */
++#define SDRAM_PRE	0x0002	/* Writing 1 generates precharge cycle and toggles bit */
++#define SDRAM_MRS	0x0004	/* Writing 1 generates mode register select cycle and toggles bit */
++#define SDRAM_EN	0x0008	/* When set, enables access to SDRAM */
++#define SDRAM_16Mb	0x0000	/* Use 16 Megabit SDRAM */
++#define SDRAM_64Mb	0x0010	/* Use 64 Megabit SDRAM */
++#define SDRAM_128Mb	0x0020	/* Use 128 Megabit SDRAM */
++#define SDRAM_RSVMb	0x0030	/* Use special SDRAM */
++#define SDRAM_RST	0x0080	/* Writing 1 causes soft reset of controller */
++#define SDRAM_SELFREF	0x0100	/* Writing 1 enables self refresh mode */
++#define SDRAM_PWRDOWN	0x0200	/* Writing 1 causes controller to power down */
++#define SDRAM_32BIT	0x0400	/* When set, indicates 32 bit SDRAM interface */
++#define SDRAM_9BITCOL	0x0800	/* When set, indicates 9 bit column */
 +
-+	/* Flush posted writes. */
-+	br32(bp, B44_IMASK);
-+}
++/* SDRAM configuration (config) register bits */
++#define SDRAM_BURSTFULL	0x0000	/* Use full page bursts */
++#define SDRAM_BURST8	0x0001	/* Use burst of 8 */
++#define SDRAM_BURST4	0x0002	/* Use burst of 4 */
++#define SDRAM_BURST2	0x0003	/* Use burst of 2 */
++#define SDRAM_CAS3	0x0000	/* Use CAS latency of 3 */
++#define SDRAM_CAS2	0x0004	/* Use CAS latency of 2 */
 +
-+static void b44_enable_ints(struct b44 *bp)
-+{
-+	bw32(bp, B44_IMASK, bp->imask);
-+}
++/* SDRAM refresh control (refresh) register bits */
++#define SDRAM_REF(p)	(((p)&0xff) | SDRAM_REF_EN)	/* Refresh period */
++#define SDRAM_REF_EN	0x8000		/* Writing 1 enables periodic refresh */
 +
-+static int b44_readphy(struct b44 *bp, int reg, u32 *val)
-+{
-+	int err;
-+
-+	bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII);
-+	bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START |
-+			     (MDIO_OP_READ << MDIO_DATA_OP_SHIFT) |
-+			     (bp->phy_addr << MDIO_DATA_PMD_SHIFT) |
-+			     (reg << MDIO_DATA_RA_SHIFT) |
-+			     (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT)));
-+	err = b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0);
-+	*val = br32(bp, B44_MDIO_DATA) & MDIO_DATA_DATA;
-+
-+	return err;
-+}
++/* SDRAM Core default Init values (OCP ID 0x803) */
++#define SDRAM_INIT	MEM4MX16X2
++#define SDRAM_CONFIG    SDRAM_BURSTFULL
++#define SDRAM_REFRESH   SDRAM_REF(0x40)
 +
-+static int b44_writephy(struct b44 *bp, int reg, u32 val)
-+{
-+	bw32(bp, B44_EMAC_ISTAT, EMAC_INT_MII);
-+	bw32(bp, B44_MDIO_DATA, (MDIO_DATA_SB_START |
-+			     (MDIO_OP_WRITE << MDIO_DATA_OP_SHIFT) |
-+			     (bp->phy_addr << MDIO_DATA_PMD_SHIFT) |
-+			     (reg << MDIO_DATA_RA_SHIFT) |
-+			     (MDIO_TA_VALID << MDIO_DATA_TA_SHIFT) |
-+			     (val & MDIO_DATA_DATA)));
-+	return b44_wait_bit(bp, B44_EMAC_ISTAT, EMAC_INT_MII, 100, 0);
-+}
++#define MEM1MX16	0x009	/* 2 MB */
++#define MEM1MX16X2	0x409	/* 4 MB */
++#define MEM2MX8X2	0x809	/* 4 MB */
++#define MEM2MX8X4	0xc09	/* 8 MB */
++#define MEM2MX32	0x439	/* 8 MB */
++#define MEM4MX16	0x019	/* 8 MB */
++#define MEM4MX16X2	0x419	/* 16 MB */
++#define MEM8MX8X2	0x819	/* 16 MB */
++#define MEM8MX16	0x829	/* 16 MB */
++#define MEM4MX32	0x429	/* 16 MB */
++#define MEM8MX8X4	0xc19	/* 32 MB */
++#define MEM8MX16X2	0xc29	/* 32 MB */
 +
-+/* miilib interface */
-+/* FIXME FIXME: phy_id is ignored, bp->phy_addr use is unconditional
-+ * due to code existing before miilib use was added to this driver.
-+ * Someone should remove this artificial driver limitation in
-+ * b44_{read,write}phy.  bp->phy_addr itself is fine (and needed).
++#endif	/* _SBSDRAM_H */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/sbutils.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbutils.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/sbutils.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/sbutils.h	2005-09-16 10:29:18.211586320 +0200
+@@ -0,0 +1,90 @@
++/*
++ * Misc utility routines for accessing chip-specific features
++ * of Broadcom HNBU SiliconBackplane-based chips.
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ * 
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id$
 + */
-+static int b44_mii_read(struct net_device *dev, int phy_id, int location)
-+{
-+	u32 val;
-+	struct b44 *bp = netdev_priv(dev);
-+	int rc = b44_readphy(bp, location, &val);
-+	if (rc)
-+		return 0xffffffff;
-+	return val;
-+}
 +
-+static void b44_mii_write(struct net_device *dev, int phy_id, int location,
-+			 int val)
-+{
-+	struct b44 *bp = netdev_priv(dev);
-+	b44_writephy(bp, location, val);
-+}
++#ifndef	_sbutils_h_
++#define	_sbutils_h_
 +
-+static int b44_phy_reset(struct b44 *bp)
-+{
-+	u32 val;
-+	int err;
-+
-+	err = b44_writephy(bp, MII_BMCR, BMCR_RESET);
-+	if (err)
-+		return err;
-+	udelay(100);
-+	err = b44_readphy(bp, MII_BMCR, &val);
-+	if (!err) {
-+		if (val & BMCR_RESET) {
-+			printk(KERN_ERR PFX "%s: PHY Reset would not complete.\n",
-+			       bp->dev->name);
-+			err = -ENODEV;
-+		}
-+	}
++/* Board styles (bustype) */
++#define	BOARDSTYLE_SOC		0		/* Silicon Backplane */
++#define	BOARDSTYLE_PCI		1		/* PCI/MiniPCI board */
++#define	BOARDSTYLE_PCMCIA	2		/* PCMCIA board */
++#define	BOARDSTYLE_CARDBUS	3		/* Cardbus board */
 +
-+	return 0;
-+}
++/*
++ * Many of the routines below take an 'sbh' handle as their first arg.
++ * Allocate this by calling sb_attach().  Free it by calling sb_detach().
++ * At any one time, the sbh is logically focused on one particular sb core
++ * (the "current core").
++ * Use sb_setcore() or sb_setcoreidx() to change the association to another core.
++ */
 +
-+static void __b44_set_flow_ctrl(struct b44 *bp, u32 pause_flags)
-+{
-+	u32 val;
++/* exported externs */
++extern void *sb_attach(uint pcidev, void *osh, void *regs, uint bustype, void *sdh, char **vars, int *varsz);
++extern void *sb_kattach(void);
++extern void sb_detach(void *sbh);
++extern uint sb_chip(void *sbh);
++extern uint sb_chiprev(void *sbh);
++extern uint sb_chippkg(void *sbh);
++extern uint sb_boardvendor(void *sbh);
++extern uint sb_boardtype(void *sbh);
++extern uint sb_boardstyle(void *sbh);
++extern uint sb_bus(void *sbh);
++extern uint sb_corelist(void *sbh, uint coreid[]);
++extern uint sb_coreid(void *sbh);
++extern uint sb_coreidx(void *sbh);
++extern uint sb_coreunit(void *sbh);
++extern uint sb_corevendor(void *sbh);
++extern uint sb_corerev(void *sbh);
++extern void *sb_coreregs(void *sbh);
++extern uint32 sb_coreflags(void *sbh, uint32 mask, uint32 val);
++extern uint32 sb_coreflagshi(void *sbh, uint32 mask, uint32 val);
++extern bool sb_iscoreup(void *sbh);
++extern void *sb_setcoreidx(void *sbh, uint coreidx);
++extern void *sb_setcore(void *sbh, uint coreid, uint coreunit);
++extern void sb_commit(void *sbh);
++extern uint32 sb_base(uint32 admatch);
++extern uint32 sb_size(uint32 admatch);
++extern void sb_core_reset(void *sbh, uint32 bits);
++extern void sb_core_tofixup(void *sbh);
++extern void sb_core_disable(void *sbh, uint32 bits);
++extern uint32 sb_clock_rate(uint32 pll_type, uint32 n, uint32 m);
++extern uint32 sb_clock(void *sbh);
++extern void sb_pci_setup(void *sbh, uint32 *dmaoffset, uint coremask);
++extern void sb_pcmcia_init(void *sbh);
++extern void sb_watchdog(void *sbh, uint ticks);
++extern void *sb_gpiosetcore(void *sbh);
++extern uint32 sb_gpiocontrol(void *sbh, uint32 mask, uint32 val);
++extern uint32 sb_gpioouten(void *sbh, uint32 mask, uint32 val);
++extern uint32 sb_gpioout(void *sbh, uint32 mask, uint32 val);
++extern uint32 sb_gpioin(void *sbh);
++extern uint32 sb_gpiointpolarity(void *sbh, uint32 mask, uint32 val);
++extern uint32 sb_gpiointmask(void *sbh, uint32 mask, uint32 val);
++extern bool sb_taclear(void *sbh);
++extern void sb_pwrctl_init(void *sbh);
++extern uint16 sb_pwrctl_fast_pwrup_delay(void *sbh);
++extern bool sb_pwrctl_clk(void *sbh, uint mode);
++extern int sb_pwrctl_xtal(void *sbh, uint what, bool on);
++extern void sb_register_intr_callback(void *sbh, void *intrsoff_fn, void *intrsrestore_fn, void *intr_arg);
 +
-+	bp->flags &= ~(B44_FLAG_TX_PAUSE | B44_FLAG_RX_PAUSE);
-+	bp->flags |= pause_flags;
++/* pwrctl xtal what flags */
++#define	XTAL		0x1			/* primary crystal oscillator (2050) */
++#define	PLL		0x2			/* main chip pll */
 +
-+	val = br32(bp, B44_RXCONFIG);
-+	if (pause_flags & B44_FLAG_RX_PAUSE)
-+		val |= RXCONFIG_FLOW;
-+	else
-+		val &= ~RXCONFIG_FLOW;
-+	bw32(bp, B44_RXCONFIG, val);
++/* pwrctl clk mode */
++#define	CLK_FAST	0			/* force fast (pll) clock */
++#define	CLK_SLOW	1			/* force slow clock */
++#define	CLK_DYNAMIC	2			/* enable dynamic power control */
 +
-+	val = br32(bp, B44_MAC_FLOW);
-+	if (pause_flags & B44_FLAG_TX_PAUSE)
-+		val |= (MAC_FLOW_PAUSE_ENAB |
-+			(0xc0 & MAC_FLOW_RX_HI_WATER));
-+	else
-+		val &= ~MAC_FLOW_PAUSE_ENAB;
-+	bw32(bp, B44_MAC_FLOW, val);
-+}
++#endif	/* _sbutils_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/trxhdr.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/trxhdr.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/trxhdr.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/trxhdr.h	2005-09-16 10:29:18.211586320 +0200
+@@ -0,0 +1,31 @@
++/*
++ * TRX image file header format.
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ * 
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id$
++ */ 
 +
-+static void b44_set_flow_ctrl(struct b44 *bp, u32 local, u32 remote)
-+{
-+	u32 pause_enab = bp->flags & (B44_FLAG_TX_PAUSE |
-+				      B44_FLAG_RX_PAUSE);
-+
-+	if (local & ADVERTISE_PAUSE_CAP) {
-+		if (local & ADVERTISE_PAUSE_ASYM) {
-+			if (remote & LPA_PAUSE_CAP)
-+				pause_enab |= (B44_FLAG_TX_PAUSE |
-+					       B44_FLAG_RX_PAUSE);
-+			else if (remote & LPA_PAUSE_ASYM)
-+				pause_enab |= B44_FLAG_RX_PAUSE;
-+		} else {
-+			if (remote & LPA_PAUSE_CAP)
-+				pause_enab |= (B44_FLAG_TX_PAUSE |
-+					       B44_FLAG_RX_PAUSE);
-+		}
-+	} else if (local & ADVERTISE_PAUSE_ASYM) {
-+		if ((remote & LPA_PAUSE_CAP) &&
-+		    (remote & LPA_PAUSE_ASYM))
-+			pause_enab |= B44_FLAG_TX_PAUSE;
-+	}
++#include <typedefs.h>
 +
-+	__b44_set_flow_ctrl(bp, pause_enab);
-+}
++#define TRX_MAGIC	0x30524448	/* "HDR0" */
++#define TRX_VERSION	1
++#define TRX_MAX_LEN	0x3A0000
++#define TRX_NO_HEADER	1		/* Do not write TRX header */	
 +
-+static int b44_setup_phy(struct b44 *bp)
-+{
-+	u32 val;
-+	int err;
++struct trx_header {
++	uint32 magic;		/* "HDR0" */
++	uint32 len;		/* Length of file including header */
++	uint32 crc32;		/* 32-bit CRC from flag_version to end of file */
++	uint32 flag_version;	/* 0:15 flags, 16:31 version */
++	uint32 offsets[3];	/* Offsets of partitions from start of header */
++};
 +
-+	if ((err = b44_readphy(bp, B44_MII_ALEDCTRL, &val)) != 0)
-+		goto out;
-+	if ((err = b44_writephy(bp, B44_MII_ALEDCTRL,
-+				val & MII_ALEDCTRL_ALLMSK)) != 0)
-+		goto out;
-+	if ((err = b44_readphy(bp, B44_MII_TLEDCTRL, &val)) != 0)
-+		goto out;
-+	if ((err = b44_writephy(bp, B44_MII_TLEDCTRL,
-+				val | MII_TLEDCTRL_ENABLE)) != 0)
-+		goto out;
++/* Compatibility */
++typedef struct trx_header TRXHDR, *PTRXHDR;
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/typedefs.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/typedefs.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/typedefs.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/typedefs.h	2005-09-16 10:29:18.212586168 +0200
+@@ -0,0 +1,162 @@
++/*
++ * Copyright 2001-2003, Broadcom Corporation   
++ * All Rights Reserved.   
++ *    
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY   
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM   
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS   
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.   
++ * $Id$
++ */
 +
-+	if (!(bp->flags & B44_FLAG_FORCE_LINK)) {
-+		u32 adv = ADVERTISE_CSMA;
++#ifndef _TYPEDEFS_H_
++#define _TYPEDEFS_H_
 +
-+		if (bp->flags & B44_FLAG_ADV_10HALF)
-+			adv |= ADVERTISE_10HALF;
-+		if (bp->flags & B44_FLAG_ADV_10FULL)
-+			adv |= ADVERTISE_10FULL;
-+		if (bp->flags & B44_FLAG_ADV_100HALF)
-+			adv |= ADVERTISE_100HALF;
-+		if (bp->flags & B44_FLAG_ADV_100FULL)
-+			adv |= ADVERTISE_100FULL;
++/*----------------------- define TRUE, FALSE, NULL, bool ----------------*/
++#ifdef __cplusplus
 +
-+		if (bp->flags & B44_FLAG_PAUSE_AUTO)
-+			adv |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
++#ifndef FALSE
++#define FALSE	false
++#endif
++#ifndef TRUE
++#define TRUE	true
++#endif
 +
-+		if ((err = b44_writephy(bp, MII_ADVERTISE, adv)) != 0)
-+			goto out;
-+		if ((err = b44_writephy(bp, MII_BMCR, (BMCR_ANENABLE |
-+						       BMCR_ANRESTART))) != 0)
-+			goto out;
-+	} else {
-+		u32 bmcr;
++#else /* !__cplusplus */
 +
-+		if ((err = b44_readphy(bp, MII_BMCR, &bmcr)) != 0)
-+			goto out;
-+		bmcr &= ~(BMCR_FULLDPLX | BMCR_ANENABLE | BMCR_SPEED100);
-+		if (bp->flags & B44_FLAG_100_BASE_T)
-+			bmcr |= BMCR_SPEED100;
-+		if (bp->flags & B44_FLAG_FULL_DUPLEX)
-+			bmcr |= BMCR_FULLDPLX;
-+		if ((err = b44_writephy(bp, MII_BMCR, bmcr)) != 0)
-+			goto out;
++#if defined(_WIN32)
 +
-+		/* Since we will not be negotiating there is no safe way
-+		 * to determine if the link partner supports flow control
-+		 * or not.  So just disable it completely in this case.
-+		 */
-+		b44_set_flow_ctrl(bp, 0, 0);
-+	}
++typedef	unsigned char	bool;
 +
-+out:
-+	return err;
-+}
++#else
 +
-+static void b44_stats_update(struct b44 *bp)
-+{
-+	unsigned long reg;
-+	u32 *val;
++#if defined(MACOSX) && defined(KERNEL)
++#include <IOKit/IOTypes.h>
++#else
++typedef	int	bool;
++#endif
 +
-+	val = &bp->hw_stats.tx_good_octets;
-+	for (reg = B44_TX_GOOD_O; reg <= B44_TX_PAUSE; reg += 4UL) {
-+		*val++ += br32(bp, reg);
-+	}
-+	val = &bp->hw_stats.rx_good_octets;
-+	for (reg = B44_RX_GOOD_O; reg <= B44_RX_NPAUSE; reg += 4UL) {
-+		*val++ += br32(bp, reg);
-+	}
-+}
++#endif
 +
-+static void b44_link_report(struct b44 *bp)
-+{
-+	if (!netif_carrier_ok(bp->dev)) {
-+		printk(KERN_INFO PFX "%s: Link is down.\n", bp->dev->name);
-+	} else {
-+		printk(KERN_INFO PFX "%s: Link is up at %d Mbps, %s duplex.\n",
-+		       bp->dev->name,
-+		       (bp->flags & B44_FLAG_100_BASE_T) ? 100 : 10,
-+		       (bp->flags & B44_FLAG_FULL_DUPLEX) ? "full" : "half");
-+
-+		printk(KERN_INFO PFX "%s: Flow control is %s for TX and "
-+		       "%s for RX.\n",
-+		       bp->dev->name,
-+		       (bp->flags & B44_FLAG_TX_PAUSE) ? "on" : "off",
-+		       (bp->flags & B44_FLAG_RX_PAUSE) ? "on" : "off");
-+	}
-+}
++#ifndef FALSE
++#define FALSE	0
++#endif
++#ifndef TRUE
++#define TRUE	1
 +
-+static void b44_check_phy(struct b44 *bp)
-+{
-+	u32 bmsr, aux;
++#ifndef NULL
++#define	NULL 0
++#endif
 +
-+	if (!b44_readphy(bp, MII_BMSR, &bmsr) &&
-+	    !b44_readphy(bp, B44_MII_AUXCTRL, &aux) &&
-+	    (bmsr != 0xffff)) {
-+		if (aux & MII_AUXCTRL_SPEED)
-+			bp->flags |= B44_FLAG_100_BASE_T;
-+		else
-+			bp->flags &= ~B44_FLAG_100_BASE_T;
-+		if (aux & MII_AUXCTRL_DUPLEX)
-+			bp->flags |= B44_FLAG_FULL_DUPLEX;
-+		else
-+			bp->flags &= ~B44_FLAG_FULL_DUPLEX;
++#endif
 +
-+		if (!netif_carrier_ok(bp->dev) &&
-+		    (bmsr & BMSR_LSTATUS)) {
-+			u32 val = br32(bp, B44_TX_CTRL);
-+			u32 local_adv, remote_adv;
++#endif /* __cplusplus */
 +
-+			if (bp->flags & B44_FLAG_FULL_DUPLEX)
-+				val |= TX_CTRL_DUPLEX;
-+			else
-+				val &= ~TX_CTRL_DUPLEX;
-+			bw32(bp, B44_TX_CTRL, val);
-+
-+			if (!(bp->flags & B44_FLAG_FORCE_LINK) &&
-+			    !b44_readphy(bp, MII_ADVERTISE, &local_adv) &&
-+			    !b44_readphy(bp, MII_LPA, &remote_adv))
-+				b44_set_flow_ctrl(bp, local_adv, remote_adv);
-+
-+			/* Link now up */
-+			netif_carrier_on(bp->dev);
-+			b44_link_report(bp);
-+		} else if (netif_carrier_ok(bp->dev) && !(bmsr & BMSR_LSTATUS)) {
-+			/* Link now down */
-+			netif_carrier_off(bp->dev);
-+			b44_link_report(bp);
-+		}
++#ifndef OFF
++#define	OFF	0
++#endif
 +
-+		if (bmsr & BMSR_RFAULT)
-+			printk(KERN_WARNING PFX "%s: Remote fault detected in PHY\n",
-+			       bp->dev->name);
-+		if (bmsr & BMSR_JCD)
-+			printk(KERN_WARNING PFX "%s: Jabber detected in PHY\n",
-+			       bp->dev->name);
-+	}
-+}
++#ifndef ON
++#define	ON	1
++#endif
 +
-+static void b44_timer(unsigned long __opaque)
-+{
-+	struct b44 *bp = (struct b44 *) __opaque;
++/*----------------------- define uchar, ushort, uint, ulong ----------------*/
 +
-+	spin_lock_irq(&bp->lock);
++typedef unsigned char uchar;
 +
-+	b44_check_phy(bp);
++#if defined(_WIN32) || defined(PMON) || defined(__MRC__) || defined(V2_HAL) || defined(_CFE_)
 +
-+	b44_stats_update(bp);
++#ifndef V2_HAL
++typedef unsigned short	ushort;
++#endif
 +
-+	spin_unlock_irq(&bp->lock);
++typedef unsigned int	uint;
++typedef unsigned long	ulong;
 +
-+	bp->timer.expires = jiffies + HZ;
-+	add_timer(&bp->timer);
-+}
++#else
 +
-+static void b44_tx(struct b44 *bp)
-+{
-+	u32 cur, cons;
++/* pick up ushort & uint from standard types.h */
++#if defined(linux) && defined(__KERNEL__)
++#include <linux/types.h>	/* sys/types.h and linux/types.h are oil and water */
++#else
++#include <sys/types.h>	
++#if !defined(TARGETENV_sun4) && !defined(linux)
++typedef unsigned long	ulong;
++#endif /* TARGETENV_sun4 */
++#endif
++#if defined(PMON)
++typedef unsigned int	uint;
++typedef unsigned long long       uint64;
++#endif
 +
-+	cur  = br32(bp, B44_DMATX_STAT) & DMATX_STAT_CDMASK;
-+	cur /= sizeof(struct dma_desc);
++#endif /* WIN32 || PMON || .. */
 +
-+	/* XXX needs updating when NETIF_F_SG is supported */
-+	for (cons = bp->tx_cons; cons != cur; cons = NEXT_TX(cons)) {
-+		struct ring_info *rp = &bp->tx_buffers[cons];
-+		struct sk_buff *skb = rp->skb;
++/*----------------------- define [u]int8/16/32/64 --------------------------*/
 +
-+		if (unlikely(skb == NULL))
-+			BUG();
 +
-+		pci_unmap_single(bp->pdev,
-+				 pci_unmap_addr(rp, mapping),
-+				 skb->len,
-+				 PCI_DMA_TODEVICE);
-+		rp->skb = NULL;
-+		dev_kfree_skb_irq(skb);
-+	}
++#ifdef V2_HAL
++#include <bcmos.h>
++#else
++typedef signed char	int8;
++typedef signed short	int16;
++typedef signed int	int32;
 +
-+	bp->tx_cons = cons;
-+	if (netif_queue_stopped(bp->dev) &&
-+	    TX_BUFFS_AVAIL(bp) > B44_TX_WAKEUP_THRESH)
-+		netif_wake_queue(bp->dev);
++typedef unsigned char	uint8;
++typedef unsigned short	uint16;
++typedef unsigned int	uint32;
++#endif	/* V2_HAL */
 +
-+	bw32(bp, B44_GPTIMER, 0);
-+}
++typedef float		float32;
++typedef double		float64;
 +
-+/* Works like this.  This chip writes a 'struct rx_header" 30 bytes
-+ * before the DMA address you give it.  So we allocate 30 more bytes
-+ * for the RX buffer, DMA map all of it, skb_reserve the 30 bytes, then
-+ * point the chip at 30 bytes past where the rx_header will go.
++/*
++ * abstracted floating point type allows for compile time selection of
++ * single or double precision arithmetic.  Compiling with -DFLOAT32
++ * selects single precision; the default is double precision.
 + */
-+static int b44_alloc_rx_skb(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
-+{
-+	struct dma_desc *dp;
-+	struct ring_info *src_map, *map;
-+	struct rx_header *rh;
-+	struct sk_buff *skb;
-+	dma_addr_t mapping;
-+	int dest_idx;
-+	u32 ctrl;
-+
-+	src_map = NULL;
-+	if (src_idx >= 0)
-+		src_map = &bp->rx_buffers[src_idx];
-+	dest_idx = dest_idx_unmasked & (B44_RX_RING_SIZE - 1);
-+	map = &bp->rx_buffers[dest_idx];
-+	skb = dev_alloc_skb(RX_PKT_BUF_SZ);
-+	if (skb == NULL)
-+		return -ENOMEM;
-+
-+	mapping = pci_map_single(bp->pdev, skb->data,
-+				 RX_PKT_BUF_SZ,
-+				 PCI_DMA_FROMDEVICE);
-+
-+	/* Hardware bug work-around, the chip is unable to do PCI DMA
-+	   to/from anything above 1GB :-( */
-+	if(mapping+RX_PKT_BUF_SZ > B44_DMA_MASK) {
-+		/* Sigh... */
-+		pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
-+		dev_kfree_skb_any(skb);
-+		skb = __dev_alloc_skb(RX_PKT_BUF_SZ,GFP_DMA);
-+		if (skb == NULL)
-+			return -ENOMEM;
-+		mapping = pci_map_single(bp->pdev, skb->data,
-+					 RX_PKT_BUF_SZ,
-+					 PCI_DMA_FROMDEVICE);
-+		if(mapping+RX_PKT_BUF_SZ > B44_DMA_MASK) {
-+			pci_unmap_single(bp->pdev, mapping, RX_PKT_BUF_SZ,PCI_DMA_FROMDEVICE);
-+			dev_kfree_skb_any(skb);
-+			return -ENOMEM;
-+		}
-+	}
 +
-+	skb->dev = bp->dev;
-+	skb_reserve(skb, bp->rx_offset);
-+
-+	rh = (struct rx_header *)
-+		(skb->data - bp->rx_offset);
-+	rh->len = 0;
-+	rh->flags = 0;
++#if defined(FLOAT32)
++typedef float32 float_t;
++#else /* default to double precision floating point */
++typedef float64 float_t;
++#endif /* FLOAT32 */
 +
-+	map->skb = skb;
-+	pci_unmap_addr_set(map, mapping, mapping);
++#ifdef _MSC_VER	    /* Microsoft C */
++typedef signed __int64	int64;
++typedef unsigned __int64 uint64;
 +
-+	if (src_map != NULL)
-+		src_map->skb = NULL;
++#elif defined(__GNUC__) && !defined(__STRICT_ANSI__)
++/* gcc understands signed/unsigned 64 bit types, but complains in ANSI mode */
++typedef signed long long int64;
++typedef unsigned long long uint64;
 +
-+	ctrl  = (DESC_CTRL_LEN & (RX_PKT_BUF_SZ - bp->rx_offset));
-+	if (dest_idx == (B44_RX_RING_SIZE - 1))
-+		ctrl |= DESC_CTRL_EOT;
++#elif defined(__ICL) && !defined(__STDC__)
++/* ICL accepts unsigned 64 bit type only, and complains in ANSI mode */
++typedef unsigned long long uint64;
 +
-+	dp = &bp->rx_ring[dest_idx];
-+	dp->ctrl = cpu_to_le32(ctrl);
-+	dp->addr = cpu_to_le32((u32) mapping + bp->rx_offset + bp->dma_offset);
++#endif /* _MSC_VER */
 +
-+	return RX_PKT_BUF_SZ;
-+}
 +
-+static void b44_recycle_rx(struct b44 *bp, int src_idx, u32 dest_idx_unmasked)
-+{
-+	struct dma_desc *src_desc, *dest_desc;
-+	struct ring_info *src_map, *dest_map;
-+	struct rx_header *rh;
-+	int dest_idx;
-+	u32 ctrl;
-+
-+	dest_idx = dest_idx_unmasked & (B44_RX_RING_SIZE - 1);
-+	dest_desc = &bp->rx_ring[dest_idx];
-+	dest_map = &bp->rx_buffers[dest_idx];
-+	src_desc = &bp->rx_ring[src_idx];
-+	src_map = &bp->rx_buffers[src_idx];
-+
-+	dest_map->skb = src_map->skb;
-+	rh = (struct rx_header *) src_map->skb->data;
-+	rh->len = 0;
-+	rh->flags = 0;
-+	pci_unmap_addr_set(dest_map, mapping,
-+			   pci_unmap_addr(src_map, mapping));
-+
-+	ctrl = src_desc->ctrl;
-+	if (dest_idx == (B44_RX_RING_SIZE - 1))
-+		ctrl |= cpu_to_le32(DESC_CTRL_EOT);
-+	else
-+		ctrl &= cpu_to_le32(~DESC_CTRL_EOT);
++/*----------------------- define PTRSZ, INLINE --------------------------*/
 +
-+	dest_desc->ctrl = ctrl;
-+	dest_desc->addr = src_desc->addr;
-+	src_map->skb = NULL;
++#define	PTRSZ	sizeof (char*)
 +
-+	pci_dma_sync_single_for_device(bp->pdev, src_desc->addr,
-+				       RX_PKT_BUF_SZ,
-+				       PCI_DMA_FROMDEVICE);
-+}
++#ifndef INLINE
 +
-+static int b44_rx(struct b44 *bp, int budget)
-+{
-+	int received;
-+	u32 cons, prod;
-+
-+	received = 0;
-+	prod  = br32(bp, B44_DMARX_STAT) & DMARX_STAT_CDMASK;
-+	prod /= sizeof(struct dma_desc);
-+	cons = bp->rx_cons;
-+
-+	while (cons != prod && budget > 0) {
-+		struct ring_info *rp = &bp->rx_buffers[cons];
-+		struct sk_buff *skb = rp->skb;
-+		dma_addr_t map = pci_unmap_addr(rp, mapping);
-+		struct rx_header *rh;
-+		u16 len;
-+
-+		pci_dma_sync_single_for_cpu(bp->pdev, map,
-+					    RX_PKT_BUF_SZ,
-+					    PCI_DMA_FROMDEVICE);
-+		rh = (struct rx_header *) skb->data;
-+		len = cpu_to_le16(rh->len);
-+		if ((len > (RX_PKT_BUF_SZ - bp->rx_offset)) ||
-+		    (rh->flags & cpu_to_le16(RX_FLAG_ERRORS))) {
-+		drop_it:
-+			b44_recycle_rx(bp, cons, bp->rx_prod);
-+		drop_it_no_recycle:
-+			bp->stats.rx_dropped++;
-+			goto next_pkt;
-+		}
++#ifdef _MSC_VER
 +
-+		if (len == 0) {
-+			int i = 0;
++#define INLINE __inline
 +
-+			do {
-+				udelay(2);
-+				barrier();
-+				len = cpu_to_le16(rh->len);
-+			} while (len == 0 && i++ < 5);
-+			if (len == 0)
-+				goto drop_it;
-+		}
++#elif __GNUC__
 +
-+		/* Omit CRC. */
-+		len -= 4;
-+
-+		if (len > RX_COPY_THRESHOLD) {
-+			int skb_size;
-+			skb_size = b44_alloc_rx_skb(bp, cons, bp->rx_prod);
-+			if (skb_size < 0)
-+				goto drop_it;
-+			pci_unmap_single(bp->pdev, map,
-+					 skb_size, PCI_DMA_FROMDEVICE);
-+			/* Leave out rx_header */
-+                	skb_put(skb, len+bp->rx_offset);
-+            	        skb_pull(skb,bp->rx_offset);
-+		} else {
-+			struct sk_buff *copy_skb;
++#define INLINE __inline__
 +
-+			b44_recycle_rx(bp, cons, bp->rx_prod);
-+			copy_skb = dev_alloc_skb(len + 2);
-+			if (copy_skb == NULL)
-+				goto drop_it_no_recycle;
++#else
 +
-+			copy_skb->dev = bp->dev;
-+			skb_reserve(copy_skb, 2);
-+			skb_put(copy_skb, len);
-+			/* DMA sync done above, copy just the actual packet */
-+			memcpy(copy_skb->data, skb->data+bp->rx_offset, len);
++#define INLINE
 +
-+			skb = copy_skb;
-+		}
-+		skb->ip_summed = CHECKSUM_NONE;
-+		skb->protocol = eth_type_trans(skb, bp->dev);
-+		netif_receive_skb(skb);
-+		bp->dev->last_rx = jiffies;
-+		received++;
-+		budget--;
-+	next_pkt:
-+		bp->rx_prod = (bp->rx_prod + 1) &
-+			(B44_RX_RING_SIZE - 1);
-+		cons = (cons + 1) & (B44_RX_RING_SIZE - 1);
-+	}
++#endif /* _MSC_VER */
 +
-+	bp->rx_cons = cons;
-+	bw32(bp, B44_DMARX_PTR, cons * sizeof(struct dma_desc));
++#endif /* INLINE */
 +
-+	return received;
-+}
++#endif /* _TYPEDEFS_H_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/include/wlioctl.h linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/wlioctl.h
+--- linux-2.6.12.5/arch/mips/bcm947xx/include/wlioctl.h	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/include/wlioctl.h	2005-09-16 10:29:18.213586016 +0200
+@@ -0,0 +1,690 @@
++/*
++ * Custom OID/ioctl definitions for
++ * Broadcom 802.11abg Networking Device Driver
++ *
++ * Definitions subject to change without notice.
++ *
++ * Copyright 2001-2003, Broadcom Corporation
++ * All Rights Reserved.
++ * 
++ * THIS SOFTWARE IS OFFERED "AS IS", AND BROADCOM GRANTS NO WARRANTIES OF ANY
++ * KIND, EXPRESS OR IMPLIED, BY STATUTE, COMMUNICATION OR OTHERWISE. BROADCOM
++ * SPECIFICALLY DISCLAIMS ANY IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS
++ * FOR A SPECIFIC PURPOSE OR NONINFRINGEMENT CONCERNING THIS SOFTWARE.
++ *
++ * $Id$
++ */
 +
-+static int b44_poll(struct net_device *netdev, int *budget)
-+{
-+	struct b44 *bp = netdev_priv(netdev);
-+	int done;
++#ifndef _wlioctl_h_
++#define	_wlioctl_h_
 +
-+	spin_lock_irq(&bp->lock);
++#include <typedefs.h>
++#include <proto/ethernet.h>
++#include <proto/802.11.h>
 +
-+	if (bp->istat & (ISTAT_TX | ISTAT_TO)) {
-+		/* spin_lock(&bp->tx_lock); */
-+		b44_tx(bp);
-+		/* spin_unlock(&bp->tx_lock); */
-+	}
-+	spin_unlock_irq(&bp->lock);
++#if defined(__GNUC__)
++#define	PACKED	__attribute__((packed))
++#else
++#define	PACKED
++#endif
 +
-+	done = 1;
-+	if (bp->istat & ISTAT_RX) {
-+		int orig_budget = *budget;
-+		int work_done;
++/*
++ * Per-bss information structure.
++ */
 +
-+		if (orig_budget > netdev->quota)
-+			orig_budget = netdev->quota;
++#define WL_NUMRATES		255	/* max # of rates in a rateset */
 +
-+		work_done = b44_rx(bp, orig_budget);
++typedef struct wl_rateset {
++	uint32	count;			/* # rates in this set */
++	uint8	rates[WL_NUMRATES];	/* rates in 500kbps units w/hi bit set if basic */
++} wl_rateset_t;
 +
-+		*budget -= work_done;
-+		netdev->quota -= work_done;
++#define	WL_LEGACY_BSS_INFO_VERSION	106	/* an older supported version of wl_bss_info struct */
++#define	WL_BSS_INFO_VERSION		107	/* current version of wl_bss_info struct */
 +
-+		if (work_done >= orig_budget)
-+			done = 0;
-+	}
++typedef struct wl_bss_info106 {
++	uint		version;	/* version field */
++	struct ether_addr BSSID;
++	uint8		SSID_len;
++	uint8		SSID[32];
++	uint8		Privacy;	/* 0=No WEP, 1=Use WEP */
++	int16		RSSI;		/* receive signal strength (in dBm) */
++	uint16		beacon_period;	/* units are Kusec */
++	uint16		atim_window;	/* units are Kusec */
++	uint8		channel;	/* Channel no. */
++	int8		infra;		/* 0=IBSS, 1=infrastructure, 2=unknown */
++	struct {
++		uint	count;		/* # rates in this set */
++		uint8	rates[12];	/* rates in 500kbps units w/hi bit set if basic */
++	} rateset;			/* supported rates */
++        uint8           dtim_period;    /* DTIM period */
++	int8		phy_noise;	/* noise right after tx (in dBm) */
++	uint16		capability;	/* Capability information */
++	struct dot11_bcn_prb *prb;	/* probe response frame (ioctl na) */
++	uint16		prb_len;	/* probe response frame length (ioctl na) */
++	struct {
++		uint8 supported;	/* wpa supported */
++		uint8 multicast;	/* multicast cipher */
++		uint8 ucount;		/* count of unicast ciphers */
++		uint8 unicast[4];	/* unicast ciphers */
++		uint8 acount;		/* count of auth modes */
++		uint8 auth[4];		/* Authentication modes */
++	} wpa;
++} wl_bss_info106_t;
 +
-+	if (bp->istat & ISTAT_ERRORS) {
-+		spin_lock_irq(&bp->lock);
-+		b44_halt(bp);
-+		b44_init_rings(bp);
-+		b44_init_hw(bp);
-+		netif_wake_queue(bp->dev);
-+		spin_unlock_irq(&bp->lock);
-+		done = 1;
-+	}
++typedef struct wl_bss_info {
++	uint32		version;	/* version field */
++	uint32		length;		/* byte length of data in this record, starting at version and including IEs */
++	struct ether_addr BSSID;
++	uint16		beacon_period;	/* units are Kusec */
++	uint16		capability;	/* Capability information */
++	uint8		SSID_len;
++	uint8		SSID[32];
++	struct {
++		uint	count;		/* # rates in this set */
++		uint8	rates[16];	/* rates in 500kbps units w/hi bit set if basic */
++	} rateset;			/* supported rates */
++	uint8		channel;	/* Channel no. */
++	uint16		atim_window;	/* units are Kusec */
++        uint8           dtim_period;    /* DTIM period */
++	int16		RSSI;		/* receive signal strength (in dBm) */
++	int8		phy_noise;	/* noise (in dBm) */
++	uint32		ie_length;	/* byte length of Information Elements */
++	/* variable length Information Elements */
++} wl_bss_info_t;
 +
-+	if (done) {
-+		netif_rx_complete(netdev);
-+		b44_enable_ints(bp);
-+	}
++typedef struct wl_scan_results {
++	uint32 buflen;
++	uint32 version;
++	uint32 count;
++	wl_bss_info_t bss_info[1];
++} wl_scan_results_t;
++/* size of wl_scan_results not including variable length array */
++#define WL_SCAN_RESULTS_FIXED_SIZE 12
 +
-+	return (done ? 0 : 1);
-+}
++/* uint32 list */
++typedef struct wl_uint32_list {
++	/* in - # of elements, out - # of entries */
++	uint32 count;
++	/* variable length uint32 list */
++	uint32 element[1];
++} wl_uint32_list_t;
 +
-+static irqreturn_t b44_interrupt(int irq, void *dev_id, struct pt_regs *regs)
-+{
-+	struct net_device *dev = dev_id;
-+	struct b44 *bp = netdev_priv(dev);
-+	unsigned long flags;
-+	u32 istat, imask;
-+	int handled = 0;
++typedef struct wlc_ssid {
++	uint32		SSID_len;
++	uchar		SSID[32];
++} wlc_ssid_t;
 +
-+	spin_lock_irqsave(&bp->lock, flags);
++#define WLC_CNTRY_BUF_SZ        4       /* Country string is 3 bytes + NULL */
 +
-+	istat = br32(bp, B44_ISTAT);
-+	imask = br32(bp, B44_IMASK);
++typedef struct wl_channels_in_country {
++	uint32 buflen;
++	uint32 band;
++	char country_abbrev[WLC_CNTRY_BUF_SZ];
++	uint32 count;
++	uint32 channel[1];
++} wl_channels_in_country_t;
 +
-+	/* ??? What the fuck is the purpose of the interrupt mask
-+	 * ??? register if we have to mask it out by hand anyways?
-+	 */
-+	istat &= imask;
-+	if (istat) {
-+		handled = 1;
-+		if (netif_rx_schedule_prep(dev)) {
-+			/* NOTE: These writes are posted by the readback of
-+			 *       the ISTAT register below.
-+			 */
-+			bp->istat = istat;
-+			__b44_disable_ints(bp);
-+			__netif_rx_schedule(dev);
-+		} else {
-+			printk(KERN_ERR PFX "%s: Error, poll already scheduled\n",
-+			       dev->name);
-+		}
++typedef struct wl_country_list {
++	uint32 buflen;
++	uint32 band_set;
++	uint32 band;
++	uint32 count;
++	char country_abbrev[1];
++} wl_country_list_t;
 +
-+		bw32(bp, B44_ISTAT, istat);
-+		br32(bp, B44_ISTAT);
-+	}
-+	spin_unlock_irqrestore(&bp->lock, flags);
-+	return IRQ_RETVAL(handled);
-+}
 +
-+static void b44_tx_timeout(struct net_device *dev)
-+{
-+	struct b44 *bp = netdev_priv(dev);
++/*
++* Maximum # of keys that wl driver supports in S/W. Keys supported 
++* in H/W is less than or equal to WSEC_MAX_KEYS.
++*/
++#define WSEC_MAX_KEYS		54	/* Max # of keys (50 + 4 default keys) */
++#define WSEC_MAX_DEFAULT_KEYS	4	/* # of default keys */
 +
-+	printk(KERN_ERR PFX "%s: transmit timed out, resetting\n",
-+	       dev->name);
++/*
++* Remove these two defines if access to crypto/tkhash.h 
++* is unconditionally permitted.
++*/
++#define TKHASH_P1_KEY_SIZE	10	/* size of TKHash Phase1 output, in bytes */
++#define TKHASH_P2_KEY_SIZE	16	/* size of TKHash Phase2 output */
 +
-+	spin_lock_irq(&bp->lock);
++/* Enumerate crypto algorithms */
++#define	CRYPTO_ALGO_OFF			0
++#define	CRYPTO_ALGO_WEP1		1
++#define	CRYPTO_ALGO_TKIP		2
++#define	CRYPTO_ALGO_WEP128		3
++#define CRYPTO_ALGO_AES_CCM		4
++#define CRYPTO_ALGO_AES_OCB_MSDU	5
++#define CRYPTO_ALGO_AES_OCB_MPDU	6
++#define CRYPTO_ALGO_NALG		7
 +
-+	b44_halt(bp);
-+	b44_init_rings(bp);
-+	b44_init_hw(bp);
++/* For use with wlc_wep_key.flags */
++#define WSEC_PRIMARY_KEY	(1 << 1)	/* Indicates this key is the primary (ie tx) key */
++#define WSEC_TKIP_ERROR		(1 << 2)	/* Provoke deliberate MIC error */
++#define WSEC_REPLAY_ERROR	(1 << 3)	/* Provoke deliberate replay */
 +
-+	spin_unlock_irq(&bp->lock);
++#define WSEC_GEN_MIC_ERROR	0x0001
++#define WSEC_GEN_REPLAY		0x0002
 +
-+	b44_enable_ints(bp);
++typedef struct tkip_info {
++	uint16		phase1[TKHASH_P1_KEY_SIZE/sizeof(uint16)];	/* tkhash phase1 result */
++	uint8		phase2[TKHASH_P2_KEY_SIZE];	/* tkhash phase2 result */
++	uint32		micl;
++	uint32		micr;
++} tkip_info_t;
 +
-+	netif_wake_queue(dev);
-+}
++typedef struct wsec_iv {
++	uint32		hi;	/* upper 32 bits of IV */
++	uint16		lo;	/* lower 16 bits of IV */
++} wsec_iv_t;
 +
-+static int b44_start_xmit(struct sk_buff *skb, struct net_device *dev)
-+{
-+	struct b44 *bp = netdev_priv(dev);
-+	struct sk_buff *bounce_skb;
-+	dma_addr_t mapping;
-+	u32 len, entry, ctrl;
-+
-+	len = skb->len;
-+	spin_lock_irq(&bp->lock);
-+
-+	/* This is a hard error, log it. */
-+	if (unlikely(TX_BUFFS_AVAIL(bp) < 1)) {
-+		netif_stop_queue(dev);
-+		spin_unlock_irq(&bp->lock);
-+		printk(KERN_ERR PFX "%s: BUG! Tx Ring full when queue awake!\n",
-+		       dev->name);
-+		return 1;
-+	}
++typedef struct wsec_key {
++	uint32		index;		/* key index */
++	uint32		len;		/* key length */
++	uint8		data[DOT11_MAX_KEY_SIZE];	/* key data */
++	tkip_info_t	tkip_tx;	/* tkip transmit state */
++	tkip_info_t	tkip_rx;	/* tkip receive state */
++	uint32		algo;		/* CRYPTO_ALGO_AES_CCM, CRYPTO_ALGO_WEP128, etc */
++	uint32		flags;		/* misc flags */
++	uint32 		algo_hw;	/* cache for hw register*/
++	uint32 		aes_mode;	/* cache for hw register*/
++	int		iv_len;		/* IV length */		
++	int		iv_initialized;	/* has IV been initialized already? */		
++	int		icv_len;	/* ICV length */
++	wsec_iv_t	rxiv;		/* Rx IV */
++	wsec_iv_t	txiv;		/* Tx IV */
++	struct ether_addr ea;		/* per station */
++} wsec_key_t;
 +
-+	mapping = pci_map_single(bp->pdev, skb->data, len, PCI_DMA_TODEVICE);
-+	if(mapping+len > B44_DMA_MASK) {
-+		/* Chip can't handle DMA to/from >1GB, use bounce buffer */
-+		pci_unmap_single(bp->pdev, mapping, len, PCI_DMA_TODEVICE);
-+
-+		bounce_skb = __dev_alloc_skb(TX_PKT_BUF_SZ,
-+					     GFP_ATOMIC|GFP_DMA);
-+		if (!bounce_skb)
-+			return NETDEV_TX_BUSY;
-+
-+		mapping = pci_map_single(bp->pdev, bounce_skb->data,
-+					 len, PCI_DMA_TODEVICE);
-+		if(mapping+len > B44_DMA_MASK) {
-+			pci_unmap_single(bp->pdev, mapping,
-+					 len, PCI_DMA_TODEVICE);
-+			dev_kfree_skb_any(bounce_skb);
-+			return NETDEV_TX_BUSY;
-+		}
++/* wireless security bitvec */
++#define WEP_ENABLED		1
++#define TKIP_ENABLED		2
++#define AES_ENABLED		4
++#define WSEC_SWFLAG		8
 +
-+		memcpy(skb_put(bounce_skb, len), skb->data, skb->len);
-+		dev_kfree_skb_any(skb);
-+		skb = bounce_skb;
-+	}
++#define WSEC_SW(wsec)		((wsec) & WSEC_SWFLAG)
++#define WSEC_HW(wsec)		(!WSEC_SW(wsec))
++#define WSEC_WEP_ENABLED(wsec)	((wsec) & WEP_ENABLED)
++#define WSEC_TKIP_ENABLED(wsec)	((wsec) & TKIP_ENABLED)
++#define WSEC_AES_ENABLED(wsec)	((wsec) & AES_ENABLED)
++#define WSEC_ENABLED(wsec)	((wsec) & (WEP_ENABLED | TKIP_ENABLED | AES_ENABLED))
 +
-+	entry = bp->tx_prod;
-+	bp->tx_buffers[entry].skb = skb;
-+	pci_unmap_addr_set(&bp->tx_buffers[entry], mapping, mapping);
++/* wireless authentication bit vector */
++#define WPA_ENABLED	1
++#define PSK_ENABLED	2
 +
-+	ctrl  = (len & DESC_CTRL_LEN);
-+	ctrl |= DESC_CTRL_IOC | DESC_CTRL_SOF | DESC_CTRL_EOF;
-+	if (entry == (B44_TX_RING_SIZE - 1))
-+		ctrl |= DESC_CTRL_EOT;
++#define WAUTH_WPA_ENABLED(wauth)	((wauth) & WPA_ENABLED)
++#define WAUTH_PSK_ENABLED(wauth)	((wauth) & PSK_ENABLED)
++#define WAUTH_ENABLED(wauth)		((wauth) & (WPA_ENABLED | PSK_ENABLED))
 +
-+	bp->tx_ring[entry].ctrl = cpu_to_le32(ctrl);
-+	bp->tx_ring[entry].addr = cpu_to_le32((u32) mapping+bp->dma_offset);
++/* group/mcast cipher */
++#define WPA_MCAST_CIPHER(wsec)	(((wsec) & TKIP_ENABLED) ? WPA_CIPHER_TKIP : \
++				((wsec) & AES_ENABLED) ? WPA_CIPHER_AES_CCM : \
++				WPA_CIPHER_NONE)
 +
-+	entry = NEXT_TX(entry);
++typedef struct wl_led_info {
++	uint32		index;		/* led index */
++	uint32		behavior;
++	bool		activehi;
++} wl_led_info_t;
 +
-+	bp->tx_prod = entry;
++/*
++ * definitions for driver messages passed from WL to NAS.
++ */
++/* Use this to recognize wpa and 802.1x driver messages. */
++static const uint8 wl_wpa_snap_template[] =
++	{ 0xaa, 0xaa, 0x03, 0x00, 0x90, 0x4c };
 +
-+	wmb();
++#define WL_WPA_MSG_IFNAME_MAX	16
 +
-+	bw32(bp, B44_DMATX_PTR, entry * sizeof(struct dma_desc));
-+	if (bp->flags & B44_FLAG_BUGGY_TXPTR)
-+		bw32(bp, B44_DMATX_PTR, entry * sizeof(struct dma_desc));
-+	if (bp->flags & B44_FLAG_REORDER_BUG)
-+		br32(bp, B44_DMATX_PTR);
++/* WPA driver message */
++typedef struct wl_wpa_header {
++	struct ether_header eth;
++	struct dot11_llc_snap_header snap;
++	uint8 version;
++	uint8 type;
++	/* version 2 additions */
++	char ifname[WL_WPA_MSG_IFNAME_MAX];
++	/* version specific data */
++	/* uint8 data[1]; */
++} wl_wpa_header_t PACKED;
 +
-+	if (TX_BUFFS_AVAIL(bp) < 1)
-+		netif_stop_queue(dev);
++#define WL_WPA_HEADER_LEN	(ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX)
 +
-+	spin_unlock_irq(&bp->lock);
++/* WPA driver message ethertype - private between wlc and nas */
++#define WL_WPA_ETHER_TYPE	0x9999
 +
-+	dev->trans_start = jiffies;
++/* WPA driver message current version */
++#define WL_WPA_MSG_VERSION	2
 +
-+	return 0;
-+}
++/* Type field values for the 802.2 driver messages for WPA. */
++#define WLC_ASSOC_MSG		1
++#define WLC_DISASSOC_MSG	2
++#define WLC_PTK_MIC_MSG		3
++#define WLC_GTK_MIC_MSG		4
 +
-+static int b44_change_mtu(struct net_device *dev, int new_mtu)
-+{
-+	struct b44 *bp = netdev_priv(dev);
++/* 802.1x driver message */
++typedef struct wl_eapol_header {
++	struct ether_header eth;
++	struct dot11_llc_snap_header snap;
++	uint8 version;
++	uint8 reserved;
++	char ifname[WL_WPA_MSG_IFNAME_MAX];
++	/* version specific data */
++	/* uint8 802_1x_msg[1]; */
++} wl_eapol_header_t PACKED;
 +
-+	if (new_mtu < B44_MIN_MTU || new_mtu > B44_MAX_MTU)
-+		return -EINVAL;
++#define WL_EAPOL_HEADER_LEN	(ETHER_HDR_LEN + DOT11_LLC_SNAP_HDR_LEN + 2 + WL_WPA_MSG_IFNAME_MAX)
 +
-+	if (!netif_running(dev)) {
-+		/* We'll just catch it later when the
-+		 * device is up'd.
-+		 */
-+		dev->mtu = new_mtu;
-+		return 0;
-+	}
++/* 802.1x driver message ethertype - private between wlc and nas */
++#define WL_EAPOL_ETHER_TYPE	0x999A
 +
-+	spin_lock_irq(&bp->lock);
-+	b44_halt(bp);
-+	dev->mtu = new_mtu;
-+	b44_init_rings(bp);
-+	b44_init_hw(bp);
-+	spin_unlock_irq(&bp->lock);
++/* 802.1x driver message current version */
++#define WL_EAPOL_MSG_VERSION	1
 +
-+	b44_enable_ints(bp);
-+	
-+	return 0;
-+}
++/* srom read/write struct passed through ioctl */
++typedef struct {
++	uint   byteoff;		/* byte offset */
++	uint   nbytes;		/* number of bytes */
++	uint16 buf[1];
++} srom_rw_t;
 +
-+/* Free up pending packets in all rx/tx rings.
-+ *
-+ * The chip has been shut down and the driver detached from
-+ * the networking, so no interrupts or new tx packets will
-+ * end up in the driver.  bp->lock is not held and we are not
-+ * in an interrupt context and thus may sleep.
-+ */
-+static void b44_free_rings(struct b44 *bp)
-+{
-+	struct ring_info *rp;
-+	int i;
++/* R_REG and W_REG struct passed through ioctl */
++typedef struct {
++	uint32	byteoff;	/* byte offset of the field in d11regs_t */
++	uint32	val;		/* read/write value of the field */
++	uint32	size;		/* sizeof the field */
++} rw_reg_t;
 +
-+	for (i = 0; i < B44_RX_RING_SIZE; i++) {
-+		rp = &bp->rx_buffers[i];
++/* Structure used by GET/SET_ATTEN ioctls */
++typedef struct {
++	uint16	auto_ctrl;	/* 1: Automatic control, 0: overriden */
++	uint16	bb;		/* Baseband attenuation */
++	uint16	radio;		/* Radio attenuation */
++	uint16	txctl1;		/* Radio TX_CTL1 value */
++} atten_t;
 +
-+		if (rp->skb == NULL)
-+			continue;
-+		pci_unmap_single(bp->pdev,
-+				 pci_unmap_addr(rp, mapping),
-+				 RX_PKT_BUF_SZ,
-+				 PCI_DMA_FROMDEVICE);
-+		dev_kfree_skb_any(rp->skb);
-+		rp->skb = NULL;
-+	}
++/* Used to get specific STA parameters */ 
++typedef struct {
++	uint32	val;
++	struct ether_addr ea;
++} scb_val_t;
 +
-+	/* XXX needs changes once NETIF_F_SG is set... */
-+	for (i = 0; i < B44_TX_RING_SIZE; i++) {
-+		rp = &bp->tx_buffers[i];
++/* callback registration data types */
 +
-+		if (rp->skb == NULL)
-+			continue;
-+		pci_unmap_single(bp->pdev,
-+				 pci_unmap_addr(rp, mapping),
-+				 rp->skb->len,
-+				 PCI_DMA_TODEVICE);
-+		dev_kfree_skb_any(rp->skb);
-+		rp->skb = NULL;
-+	}
-+}
++typedef struct _mac_event_params {
++	uint msg;
++	struct ether_addr *addr;
++	uint result;
++	uint status; 
++	uint auth_type;
++} mac_event_params_t;
 +
-+/* Initialize tx/rx rings for packet processing.
-+ *
-+ * The chip has been shut down and the driver detached from
-+ * the networking, so no interrupts or new tx packets will
-+ * end up in the driver.  bp->lock is not held and we are not
-+ * in an interrupt context and thus may sleep.
-+ */
-+static void b44_init_rings(struct b44 *bp)
-+{
-+	int i;
++typedef struct _mic_error_params {
++	struct ether_addr *ea;
++	bool group;
++	bool flush_txq;
++} mic_error_params_t;
 +
-+	b44_free_rings(bp);
++typedef enum _wl_callback {
++	WL_MAC_EVENT_CALLBACK = 0,
++	WL_LINK_UP_CALLBACK,
++	WL_LINK_DOWN_CALLBACK,
++	WL_MIC_ERROR_CALLBACK,
++	WL_LAST_CALLBACK
++} wl_callback_t;
 +
-+	memset(bp->rx_ring, 0, B44_RX_RING_BYTES);
-+	memset(bp->tx_ring, 0, B44_TX_RING_BYTES);
++typedef struct _callback {
++	void (*fn)(void *, void *);
++	void *context;
++} callback_t;
 +
-+	for (i = 0; i < bp->rx_pending; i++) {
-+		if (b44_alloc_rx_skb(bp, -1, i) < 0)
-+			break;
-+	}
-+}
++typedef struct _scan_callback {
++	void (*fn)(void *);
++	void *context;
++} scan_callback_t;
 +
-+/*
-+ * Must not be invoked with interrupt sources disabled and
-+ * the hardware shutdown down.
-+ */
-+static void b44_free_consistent(struct b44 *bp)
-+{
-+	if (bp->rx_buffers) {
-+		kfree(bp->rx_buffers);
-+		bp->rx_buffers = NULL;
-+	}
-+	if (bp->tx_buffers) {
-+		kfree(bp->tx_buffers);
-+		bp->tx_buffers = NULL;
-+	}
-+	if (bp->rx_ring) {
-+		pci_free_consistent(bp->pdev, DMA_TABLE_BYTES,
-+				    bp->rx_ring, bp->rx_ring_dma);
-+		bp->rx_ring = NULL;
-+	}
-+	if (bp->tx_ring) {
-+		pci_free_consistent(bp->pdev, DMA_TABLE_BYTES,
-+				    bp->tx_ring, bp->tx_ring_dma);
-+		bp->tx_ring = NULL;
-+	}
-+}
++/* used to register an arbitrary callback via the IOCTL interface */
++typedef struct _set_callback {
++	int index;
++	callback_t callback;
++} set_callback_t;
 +
 +/*
-+ * Must not be invoked with interrupt sources disabled and
-+ * the hardware shutdown down.  Can sleep.
++ * Country locale determines which channels are available to us.
 + */
-+static int b44_alloc_consistent(struct b44 *bp)
-+{
-+	int size;
++typedef enum _wlc_locale {
++	WLC_WW = 0,	/* Worldwide */
++	WLC_THA,	/* Thailand */
++	WLC_ISR,	/* Israel */
++	WLC_JDN,	/* Jordan */
++	WLC_PRC,	/* China */
++	WLC_JPN,	/* Japan */
++	WLC_FCC,	/* USA */
++	WLC_EUR,	/* Europe */
++	WLC_USL,	/* US Low Band only */
++	WLC_JPH,	/* Japan High Band only */
++	WLC_ALL,	/* All the channels in this band */
++	WLC_11D,	/* Represents locale recieved by 11d beacons */
++	WLC_LAST_LOCALE,
++	WLC_UNDEFINED_LOCALE = 0xf
++} wlc_locale_t;
 +
-+	size  = B44_RX_RING_SIZE * sizeof(struct ring_info);
-+	bp->rx_buffers = kmalloc(size, GFP_KERNEL);
-+	if (!bp->rx_buffers)
-+		goto out_err;
-+	memset(bp->rx_buffers, 0, size);
++/* channel encoding */
++typedef struct channel_info {
++	int hw_channel;
++	int target_channel;
++	int scan_channel;
++} channel_info_t;
 +
-+	size = B44_TX_RING_SIZE * sizeof(struct ring_info);
-+	bp->tx_buffers = kmalloc(size, GFP_KERNEL);
-+	if (!bp->tx_buffers)
-+		goto out_err;
-+	memset(bp->tx_buffers, 0, size);
++/* For ioctls that take a list of MAC addresses */
++struct maclist {
++	uint count;			/* number of MAC addresses */
++	struct ether_addr ea[1];	/* variable length array of MAC addresses */
++};
 +
-+	size = DMA_TABLE_BYTES;
-+	bp->rx_ring = pci_alloc_consistent(bp->pdev, size, &bp->rx_ring_dma);
-+	if (!bp->rx_ring)
-+		goto out_err;
++/* get pkt count struct passed through ioctl */
++typedef struct get_pktcnt {
++	uint rx_good_pkt;
++	uint rx_bad_pkt;
++	uint tx_good_pkt;
++	uint tx_bad_pkt;
++} get_pktcnt_t;
 +
-+	bp->tx_ring = pci_alloc_consistent(bp->pdev, size, &bp->tx_ring_dma);
-+	if (!bp->tx_ring)
-+		goto out_err;
++/* Linux network driver ioctl encoding */
++typedef struct wl_ioctl {
++	int cmd;	/* common ioctl definition */
++	void *buf;	/* pointer to user buffer */
++	int len;	/* length of user buffer */
++} wl_ioctl_t;
 +
-+	return 0;
++/* 
++ * Structure for passing hardware and software 
++ * revision info up from the driver. 
++ */
++typedef struct wlc_rev_info {
++	uint		vendorid;	/* PCI vendor id */
++	uint		deviceid;	/* device id of chip */
++	uint		radiorev;	/* radio revision */
++	uint		chiprev;	/* chip revision */
++	uint		corerev;	/* core revision */
++	uint		boardid;	/* board identifier (usu. PCI sub-device id) */
++	uint		boardvendor;	/* board vendor (usu. PCI sub-vendor id) */
++	uint		boardrev;	/* board revision */
++	uint		driverrev;	/* driver version */
++	uint		ucoderev;	/* microcode version */
++	uint		bus;		/* bus type */
++	uint        chipnum;    /* chip number */
++} wlc_rev_info_t;
 +
-+out_err:
-+	b44_free_consistent(bp);
-+	return -ENOMEM;
-+}
++/* check this magic number */
++#define WLC_IOCTL_MAGIC		0x14e46c77
 +
-+/* bp->lock is held. */
-+static void b44_clear_stats(struct b44 *bp)
-+{
-+	unsigned long reg;
++/* bump this number if you change the ioctl interface */
++#define WLC_IOCTL_VERSION	1
 +
-+	bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
-+	for (reg = B44_TX_GOOD_O; reg <= B44_TX_PAUSE; reg += 4UL)
-+		br32(bp, reg);
-+	for (reg = B44_RX_GOOD_O; reg <= B44_RX_NPAUSE; reg += 4UL)
-+		br32(bp, reg);
-+}
++/* maximum length buffer required */
++#define WLC_IOCTL_MAXLEN	8192
 +
-+/* bp->lock is held. */
-+static void b44_chip_reset(struct b44 *bp)
-+{
-+	if (ssb_is_core_up(bp)) {
-+		bw32(bp, B44_RCV_LAZY, 0);
-+		bw32(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE);
-+		b44_wait_bit(bp, B44_ENET_CTRL, ENET_CTRL_DISABLE, 100, 1);
-+		bw32(bp, B44_DMATX_CTRL, 0);
-+		bp->tx_prod = bp->tx_cons = 0;
-+		if (br32(bp, B44_DMARX_STAT) & DMARX_STAT_EMASK) {
-+			b44_wait_bit(bp, B44_DMARX_STAT, DMARX_STAT_SIDLE,
-+				     100, 0);
-+		}
-+		bw32(bp, B44_DMARX_CTRL, 0);
-+		bp->rx_prod = bp->rx_cons = 0;
-+	} else {
-+		ssb_pci_setup(bp, (bp->core_unit == 0 ?
-+				   SBINTVEC_ENET0 :
-+				   SBINTVEC_ENET1));
-+	}
++/* common ioctl definitions */
++#define WLC_GET_MAGIC				0
++#define WLC_GET_VERSION				1
++#define WLC_UP					2
++#define WLC_DOWN				3
++#define WLC_DUMP				6
++#define WLC_GET_MSGLEVEL			7
++#define WLC_SET_MSGLEVEL			8
++#define WLC_GET_PROMISC				9
++#define WLC_SET_PROMISC				10
++#define WLC_GET_RATE				12
++#define WLC_SET_RATE				13
++#define WLC_GET_INSTANCE			14
++#define WLC_GET_FRAG				15
++#define WLC_SET_FRAG				16
++#define WLC_GET_RTS				17
++#define WLC_SET_RTS				18
++#define WLC_GET_INFRA				19
++#define WLC_SET_INFRA				20
++#define WLC_GET_AUTH				21
++#define WLC_SET_AUTH				22
++#define WLC_GET_BSSID				23
++#define WLC_SET_BSSID				24
++#define WLC_GET_SSID				25
++#define WLC_SET_SSID				26
++#define WLC_RESTART				27
++#define WLC_GET_CHANNEL				29
++#define WLC_SET_CHANNEL				30
++#define WLC_GET_SRL				31
++#define WLC_SET_SRL				32
++#define WLC_GET_LRL				33
++#define WLC_SET_LRL				34
++#define WLC_GET_PLCPHDR				35
++#define WLC_SET_PLCPHDR				36
++#define WLC_GET_RADIO				37
++#define WLC_SET_RADIO				38
++#define WLC_GET_PHYTYPE				39
++#define WLC_GET_WEP				42
++#define WLC_SET_WEP				43
++#define WLC_GET_KEY				44
++#define WLC_SET_KEY				45
++#define WLC_SCAN				50
++#define WLC_SCAN_RESULTS			51
++#define WLC_DISASSOC				52
++#define WLC_REASSOC				53
++#define WLC_GET_ROAM_TRIGGER			54
++#define WLC_SET_ROAM_TRIGGER			55
++#define WLC_GET_TXANT				61
++#define WLC_SET_TXANT				62
++#define WLC_GET_ANTDIV				63
++#define WLC_SET_ANTDIV				64
++#define WLC_GET_TXPWR				65
++#define WLC_SET_TXPWR				66
++#define WLC_GET_CLOSED				67
++#define WLC_SET_CLOSED				68
++#define WLC_GET_MACLIST				69
++#define WLC_SET_MACLIST				70
++#define WLC_GET_RATESET				71
++#define WLC_SET_RATESET				72
++#define WLC_GET_LOCALE				73
++#define WLC_SET_LOCALE				74
++#define WLC_GET_BCNPRD				75
++#define WLC_SET_BCNPRD				76
++#define WLC_GET_DTIMPRD				77
++#define WLC_SET_DTIMPRD				78
++#define WLC_GET_SROM				79
++#define WLC_SET_SROM				80
++#define WLC_GET_WEP_RESTRICT			81
++#define WLC_SET_WEP_RESTRICT			82
++#define WLC_GET_COUNTRY				83
++#define WLC_SET_COUNTRY				84
++#define WLC_GET_REVINFO				98
++#define WLC_GET_MACMODE				105
++#define WLC_SET_MACMODE				106
++#define WLC_GET_GMODE				109
++#define WLC_SET_GMODE				110
++#define WLC_GET_CURR_RATESET			114	/* current rateset */
++#define WLC_GET_SCANSUPPRESS			115
++#define WLC_SET_SCANSUPPRESS			116
++#define WLC_GET_AP				117
++#define WLC_SET_AP				118
++#define WLC_GET_EAP_RESTRICT			119
++#define WLC_SET_EAP_RESTRICT			120
++#define WLC_GET_WDSLIST				123
++#define WLC_SET_WDSLIST				124
++#define WLC_GET_RSSI				127
++#define WLC_GET_WSEC				133
++#define WLC_SET_WSEC				134
++#define WLC_GET_BSS_INFO			136
++#define WLC_GET_LAZYWDS				138
++#define WLC_SET_LAZYWDS				139
++#define WLC_GET_BANDLIST			140
++#define WLC_GET_BAND				141
++#define WLC_SET_BAND				142
++#define WLC_GET_SHORTSLOT			144
++#define WLC_GET_SHORTSLOT_OVERRIDE		145
++#define WLC_SET_SHORTSLOT_OVERRIDE		146
++#define WLC_GET_SHORTSLOT_RESTRICT		147
++#define WLC_SET_SHORTSLOT_RESTRICT		148
++#define WLC_GET_GMODE_PROTECTION		149
++#define WLC_GET_GMODE_PROTECTION_OVERRIDE	150
++#define WLC_SET_GMODE_PROTECTION_OVERRIDE	151
++#define WLC_UPGRADE				152
++#define WLC_GET_ASSOCLIST			159
++#define WLC_GET_CLK				160
++#define WLC_SET_CLK				161
++#define WLC_GET_UP				162
++#define WLC_OUT					163
++#define WLC_GET_WPA_AUTH			164
++#define WLC_SET_WPA_AUTH			165
++#define WLC_GET_GMODE_PROTECTION_CONTROL	178
++#define WLC_SET_GMODE_PROTECTION_CONTROL	179
++#define WLC_GET_PHYLIST				180
++#define WLC_GET_GMODE_PROTECTION_CTS		198
++#define WLC_SET_GMODE_PROTECTION_CTS		199
++#define WLC_GET_PIOMODE				203
++#define WLC_SET_PIOMODE				204
++#define WLC_SET_LED				209
++#define WLC_GET_LED				210
++#define WLC_GET_CHANNEL_SEL			215
++#define WLC_START_CHANNEL_SEL			216
++#define WLC_GET_VALID_CHANNELS			217
++#define WLC_GET_FAKEFRAG			218
++#define WLC_SET_FAKEFRAG			219
++#define WLC_GET_WET				230
++#define WLC_SET_WET				231
++#define WLC_GET_KEY_PRIMARY			235
++#define WLC_SET_KEY_PRIMARY			236
++#define WLC_SCAN_WITH_CALLBACK			240
++#define WLC_SET_CS_SCAN_TIMER			248
++#define WLC_GET_CS_SCAN_TIMER			249
++#define WLC_CURRENT_PWR				256
++#define WLC_GET_CHANNELS_IN_COUNTRY		260
++#define WLC_GET_COUNTRY_LIST			261
++#define WLC_NVRAM_GET				264
++#define WLC_NVRAM_SET				265
++#define WLC_LAST				271	/* bump after adding */
 +
-+	ssb_core_reset(bp);
++/*
++ * Minor kludge alert:
++ * Duplicate a few definitions that irelay requires from epiioctl.h here
++ * so caller doesn't have to include this file and epiioctl.h .
++ * If this grows any more, it would be time to move these irelay-specific
++ * definitions out of the epiioctl.h and into a separate driver common file.
++ */
++#ifndef EPICTRL_COOKIE
++#define EPICTRL_COOKIE		0xABADCEDE
++#endif
 +
-+	b44_clear_stats(bp);
++/* vx wlc ioctl's offset */
++#define CMN_IOCTL_OFF 0x180
 +
-+	/* Make PHY accessible. */
-+	bw32(bp, B44_MDIO_CTRL, (MDIO_CTRL_PREAMBLE |
-+			     (0x0d & MDIO_CTRL_MAXF_MASK)));
-+	br32(bp, B44_MDIO_CTRL);
++/*
++ * custom OID support
++ *
++ * 0xFF - implementation specific OID
++ * 0xE4 - first byte of Broadcom PCI vendor ID
++ * 0x14 - second byte of Broadcom PCI vendor ID
++ * 0xXX - the custom OID number
++ */
 +
-+	if (!(br32(bp, B44_DEVCTRL) & DEVCTRL_IPP)) {
-+		bw32(bp, B44_ENET_CTRL, ENET_CTRL_EPSEL);
-+		br32(bp, B44_ENET_CTRL);
-+		bp->flags &= ~B44_FLAG_INTERNAL_PHY;
-+	} else {
-+		u32 val = br32(bp, B44_DEVCTRL);
++/* begin 0x1f values beyond the start of the ET driver range. */
++#define WL_OID_BASE		0xFFE41420
 +
-+		if (val & DEVCTRL_EPR) {
-+			bw32(bp, B44_DEVCTRL, (val & ~DEVCTRL_EPR));
-+			br32(bp, B44_DEVCTRL);
-+			udelay(100);
-+		}
-+		bp->flags |= B44_FLAG_INTERNAL_PHY;
-+	}
-+}
++/* NDIS overrides */
++#define OID_WL_GETINSTANCE	(WL_OID_BASE + WLC_GET_INSTANCE)
 +
-+/* bp->lock is held. */
-+static void b44_halt(struct b44 *bp)
-+{
-+	b44_disable_ints(bp);
-+	b44_chip_reset(bp);
-+}
++#define WL_DECRYPT_STATUS_SUCCESS	1
++#define WL_DECRYPT_STATUS_FAILURE	2
++#define WL_DECRYPT_STATUS_UNKNOWN	3
 +
-+/* bp->lock is held. */
-+static void __b44_set_mac_addr(struct b44 *bp)
-+{
-+	bw32(bp, B44_CAM_CTRL, 0);
-+	if (!(bp->dev->flags & IFF_PROMISC)) {
-+		u32 val;
++/* allows user-mode app to poll the status of USB image upgrade */
++#define WLC_UPGRADE_SUCCESS			0
++#define WLC_UPGRADE_PENDING			1
 +
-+		__b44_cam_write(bp, bp->dev->dev_addr, 0);
-+		val = br32(bp, B44_CAM_CTRL);
-+		bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
-+	}
-+}
++/* Bit masks for radio disabled status - returned by WL_GET_RADIO */
++#define WL_RADIO_SW_DISABLE	(1<<0)
++#define WL_RADIO_HW_DISABLE	(1<<1)
 +
-+static int b44_set_mac_addr(struct net_device *dev, void *p)
-+{
-+	struct b44 *bp = netdev_priv(dev);
-+	struct sockaddr *addr = p;
++/* Override bit for WLC_SET_TXPWR.  if set, ignore other level limits */
++#define WL_TXPWR_OVERRIDE	(1<<31)
 +
-+	if (netif_running(dev))
-+		return -EBUSY;
 +
-+	memcpy(dev->dev_addr, addr->sa_data, dev->addr_len);
++/* Bus types */
++#define WL_SB_BUS	0	/* Silicon Backplane */
++#define WL_PCI_BUS	1	/* PCI target */
++#define WL_PCMCIA_BUS	2	/* PCMCIA target */
 +
-+	spin_lock_irq(&bp->lock);
-+	__b44_set_mac_addr(bp);
-+	spin_unlock_irq(&bp->lock);
++/* band types */
++#define	WLC_BAND_AUTO		0	/* auto-select */
++#define	WLC_BAND_A		1	/* "a" band (5   Ghz) */
++#define	WLC_BAND_B		2	/* "b" band (2.4 Ghz) */
 +
-+	return 0;
-+}
++/* MAC list modes */
++#define WLC_MACMODE_DISABLED	0	/* MAC list disabled */
++#define WLC_MACMODE_DENY	1	/* Deny specified (i.e. allow unspecified) */
++#define WLC_MACMODE_ALLOW	2	/* Allow specified (i.e. deny unspecified) */	
 +
-+/* Called at device open time to get the chip ready for
-+ * packet processing.  Invoked with bp->lock held.
++/* 
++ *
 + */
-+static void __b44_set_rx_mode(struct net_device *);
-+static void b44_init_hw(struct b44 *bp)
-+{
-+	u32 val;
-+
-+	b44_chip_reset(bp);
-+	b44_phy_reset(bp);
-+	b44_setup_phy(bp);
-+
-+	/* Enable CRC32, set proper LED modes and power on PHY */
-+	bw32(bp, B44_MAC_CTRL, MAC_CTRL_CRC32_ENAB | MAC_CTRL_PHY_LEDCTRL);
-+	bw32(bp, B44_RCV_LAZY, (1 << RCV_LAZY_FC_SHIFT));
-+
-+	/* This sets the MAC address too.  */
-+	__b44_set_rx_mode(bp->dev);
-+
-+	/* MTU + eth header + possible VLAN tag + struct rx_header */
-+	bw32(bp, B44_RXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
-+	bw32(bp, B44_TXMAXLEN, bp->dev->mtu + ETH_HLEN + 8 + RX_HEADER_LEN);
-+
-+	bw32(bp, B44_TX_WMARK, 56); /* XXX magic */
-+	bw32(bp, B44_DMATX_CTRL, DMATX_CTRL_ENABLE);
-+	bw32(bp, B44_DMATX_ADDR, bp->tx_ring_dma + bp->dma_offset);
-+	bw32(bp, B44_DMARX_CTRL, (DMARX_CTRL_ENABLE |
-+			      (bp->rx_offset << DMARX_CTRL_ROSHIFT)));
-+	bw32(bp, B44_DMARX_ADDR, bp->rx_ring_dma + bp->dma_offset);
-+
-+	bw32(bp, B44_DMARX_PTR, bp->rx_pending);
-+	bp->rx_prod = bp->rx_pending;	
++#define GMODE_LEGACY_B		0
++#define GMODE_AUTO		1
++#define GMODE_ONLY		2
++#define GMODE_B_DEFERRED	3
++#define GMODE_PERFORMANCE	4
++#define GMODE_LRS		5
++#define GMODE_MAX		6
 +
-+	bw32(bp, B44_MIB_CTRL, MIB_CTRL_CLR_ON_READ);
++/* values for PLCPHdr_override */
++#define WLC_PLCP_AUTO	-1
++#define WLC_PLCP_SHORT	0
++#define WLC_PLCP_LONG	1
 +
-+	val = br32(bp, B44_ENET_CTRL);
-+	bw32(bp, B44_ENET_CTRL, (val | ENET_CTRL_ENABLE));
-+}
++/* values for g_protection_override */
++#define WLC_G_PROTECTION_AUTO	-1
++#define WLC_G_PROTECTION_OFF	0
++#define WLC_G_PROTECTION_ON	1
 +
-+static int b44_open(struct net_device *dev)
-+{
-+	struct b44 *bp = netdev_priv(dev);
-+	int err;
++/* values for g_protection_control */
++#define WLC_G_PROTECTION_CTL_OFF	0
++#define WLC_G_PROTECTION_CTL_LOCAL	1
++#define WLC_G_PROTECTION_CTL_OVERLAP	2
 +
-+	err = b44_alloc_consistent(bp);
-+	if (err)
-+		return err;
 +
-+	err = request_irq(dev->irq, b44_interrupt, SA_SHIRQ, dev->name, dev);
-+	if (err)
-+		goto err_out_free;
 +
-+	spin_lock_irq(&bp->lock);
 +
-+	b44_init_rings(bp);
-+	b44_init_hw(bp);
-+	bp->flags |= B44_FLAG_INIT_COMPLETE;
 +
-+	spin_unlock_irq(&bp->lock);
 +
-+	init_timer(&bp->timer);
-+	bp->timer.expires = jiffies + HZ;
-+	bp->timer.data = (unsigned long) bp;
-+	bp->timer.function = b44_timer;
-+	add_timer(&bp->timer);
++/* max # of leds supported by GPIO (gpio pin# == led index#) */
++#define	WL_LED_NUMGPIO		16	/* gpio 0-15 */
 +
-+	b44_enable_ints(bp);
++/* led per-pin behaviors */
++#define	WL_LED_OFF		0		/* always off */
++#define	WL_LED_ON		1		/* always on */
++#define	WL_LED_ACTIVITY		2		/* activity */
++#define	WL_LED_RADIO		3		/* radio enabled */
++#define	WL_LED_ARADIO		4		/* 5  Ghz radio enabled */
++#define	WL_LED_BRADIO		5		/* 2.4Ghz radio enabled */
++#define	WL_LED_BGMODE		6		/* on if gmode, off if bmode */
++#define	WL_LED_WI1		7		
++#define	WL_LED_WI2		8		
++#define	WL_LED_WI3		9		
++#define	WL_LED_ASSOC		10		/* associated state indicator */
++#define	WL_LED_INACTIVE		11		/* null behavior (clears default behavior) */
++#define	WL_LED_NUMBEHAVIOR	12
 +
-+	return 0;
++/* led behavior numeric value format */
++#define	WL_LED_BEH_MASK		0x7f		/* behavior mask */
++#define	WL_LED_AL_MASK		0x80		/* activelow (polarity) bit */
 +
-+err_out_free:
-+	b44_free_consistent(bp);
-+	return err;
-+}
 +
-+#if 0
-+/*static*/ void b44_dump_state(struct b44 *bp)
-+{
-+	u32 val32, val32_2, val32_3, val32_4, val32_5;
-+	u16 val16;
++/* rate check */
++#define WL_RATE_OFDM(r)		(((r) & 0x7f) == 12 || ((r) & 0x7f) == 18 || \
++				 ((r) & 0x7f) == 24 || ((r) & 0x7f) == 36 || \
++				 ((r) & 0x7f) == 48 || ((r) & 0x7f) == 72 || \
++				 ((r) & 0x7f) == 96 || ((r) & 0x7f) == 108)
 +
-+	pci_read_config_word(bp->pdev, PCI_STATUS, &val16);
-+	printk("DEBUG: PCI status [%04x] \n", val16);
 +
-+}
-+#endif
++#undef PACKED
 +
-+#ifdef CONFIG_NET_POLL_CONTROLLER
++#endif /* _wlioctl_h_ */
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/int-handler.S linux-2.6.12.5-brcm/arch/mips/bcm947xx/int-handler.S
+--- linux-2.6.12.5/arch/mips/bcm947xx/int-handler.S	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/int-handler.S	2005-09-16 10:29:18.213586016 +0200
+@@ -0,0 +1,48 @@
 +/*
-+ * Polling receive - used by netconsole and other diagnostic tools
-+ * to allow network i/o with interrupts disabled.
++ *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
++ *
++ *  This program is free software; you can redistribute  it and/or modify it
++ *  under  the terms of  the GNU General  Public License as published by the
++ *  Free Software Foundation;  either version 2 of the  License, or (at your
++ *  option) any later version.
++ *
++ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
++ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
++ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
++ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
++ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
++ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
++ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ *  You should have received a copy of the  GNU General Public License along
++ *  with this program; if not, write  to the Free Software Foundation, Inc.,
++ *  675 Mass Ave, Cambridge, MA 02139, USA.
 + */
-+static void b44_poll_controller(struct net_device *dev)
-+{
-+	disable_irq(dev->irq);
-+	b44_interrupt(dev->irq, dev, NULL);
-+	enable_irq(dev->irq);
-+}
-+#endif
-+
-+static int b44_close(struct net_device *dev)
-+{
-+	struct b44 *bp = netdev_priv(dev);
-+
-+	netif_stop_queue(dev);
-+
-+	del_timer_sync(&bp->timer);
-+
-+	spin_lock_irq(&bp->lock);
-+
-+#if 0
-+	b44_dump_state(bp);
-+#endif
-+	b44_halt(bp);
-+	b44_free_rings(bp);
-+	bp->flags &= ~B44_FLAG_INIT_COMPLETE;
-+	netif_carrier_off(bp->dev);
-+
-+	spin_unlock_irq(&bp->lock);
-+
-+	free_irq(dev->irq, dev);
-+
-+	b44_free_consistent(bp);
 +
-+	return 0;
-+}
-+
-+static struct net_device_stats *b44_get_stats(struct net_device *dev)
-+{
-+	struct b44 *bp = netdev_priv(dev);
-+	struct net_device_stats *nstat = &bp->stats;
-+	struct b44_hw_stats *hwstat = &bp->hw_stats;
-+
-+	/* Convert HW stats into netdevice stats. */
-+	nstat->rx_packets = hwstat->rx_pkts;
-+	nstat->tx_packets = hwstat->tx_pkts;
-+	nstat->rx_bytes   = hwstat->rx_octets;
-+	nstat->tx_bytes   = hwstat->tx_octets;
-+	nstat->tx_errors  = (hwstat->tx_jabber_pkts +
-+			     hwstat->tx_oversize_pkts +
-+			     hwstat->tx_underruns +
-+			     hwstat->tx_excessive_cols +
-+			     hwstat->tx_late_cols);
-+	nstat->multicast  = hwstat->tx_multicast_pkts;
-+	nstat->collisions = hwstat->tx_total_cols;
-+
-+	nstat->rx_length_errors = (hwstat->rx_oversize_pkts +
-+				   hwstat->rx_undersize);
-+	nstat->rx_over_errors   = hwstat->rx_missed_pkts;
-+	nstat->rx_frame_errors  = hwstat->rx_align_errs;
-+	nstat->rx_crc_errors    = hwstat->rx_crc_errs;
-+	nstat->rx_errors        = (hwstat->rx_jabber_pkts +
-+				   hwstat->rx_oversize_pkts +
-+				   hwstat->rx_missed_pkts +
-+				   hwstat->rx_crc_align_errs +
-+				   hwstat->rx_undersize +
-+				   hwstat->rx_crc_errs +
-+				   hwstat->rx_align_errs +
-+				   hwstat->rx_symbol_errs);
-+
-+	nstat->tx_aborted_errors = hwstat->tx_underruns;
-+#if 0
-+	/* Carrier lost counter seems to be broken for some devices */
-+	nstat->tx_carrier_errors = hwstat->tx_carrier_lost;
-+#endif
++#include <asm/asm.h>
++#include <asm/mipsregs.h>
++#include <asm/regdef.h>
++#include <asm/stackframe.h>
 +
-+	return nstat;
-+}
++	.text
++	.set	noreorder
++	.set	noat
++	.align	5
 +
-+static int __b44_load_mcast(struct b44 *bp, struct net_device *dev)
-+{
-+	struct dev_mc_list *mclist;
-+	int i, num_ents;
++	NESTED(bcm47xx_irq_handler, PT_SIZE, sp)
++	SAVE_ALL
++	CLI
 +
-+	num_ents = min_t(int, dev->mc_count, B44_MCAST_TABLE_SIZE);
-+	mclist = dev->mc_list;
-+	for (i = 0; mclist && i < num_ents; i++, mclist = mclist->next) {
-+		__b44_cam_write(bp, mclist->dmi_addr, i + 1);
-+	}
-+	return i+1;
-+}
++	.set	at
++	.set    noreorder
 +
-+static void __b44_set_rx_mode(struct net_device *dev)
-+{
-+	struct b44 *bp = netdev_priv(dev);
-+	u32 val;
-+	int i=0;
-+	unsigned char zero[6] = {0,0,0,0,0,0};
-+
-+	val = br32(bp, B44_RXCONFIG);
-+	val &= ~(RXCONFIG_PROMISC | RXCONFIG_ALLMULTI);
-+	if (dev->flags & IFF_PROMISC) {
-+		val |= RXCONFIG_PROMISC;
-+		bw32(bp, B44_RXCONFIG, val);
-+	} else {
-+		__b44_set_mac_addr(bp);
++	jal	bcm47xx_irq_dispatch
++	move	a0, sp
 +
-+		if (dev->flags & IFF_ALLMULTI)
-+			val |= RXCONFIG_ALLMULTI;
-+		else
-+			i=__b44_load_mcast(bp, dev);
++	j	ret_from_irq
++	nop
 +		
-+		for(;i<64;i++) {
-+			__b44_cam_write(bp, zero, i);			
-+		}
-+		bw32(bp, B44_RXCONFIG, val);
-+        	val = br32(bp, B44_CAM_CTRL);
-+	        bw32(bp, B44_CAM_CTRL, val | CAM_CTRL_ENABLE);
-+	}
-+}
-+
-+static void b44_set_rx_mode(struct net_device *dev)
-+{
-+	struct b44 *bp = netdev_priv(dev);
-+
-+	spin_lock_irq(&bp->lock);
-+	__b44_set_rx_mode(dev);
-+	spin_unlock_irq(&bp->lock);
-+}
-+
-+static u32 b44_get_msglevel(struct net_device *dev)
-+{
-+	struct b44 *bp = netdev_priv(dev);
-+	return bp->msg_enable;
-+}
-+
-+static void b44_set_msglevel(struct net_device *dev, u32 value)
-+{
-+	struct b44 *bp = netdev_priv(dev);
-+	bp->msg_enable = value;
-+}
-+
-+static void b44_get_drvinfo (struct net_device *dev, struct ethtool_drvinfo *info)
-+{
-+	struct b44 *bp = netdev_priv(dev);
-+	struct pci_dev *pci_dev = bp->pdev;
-+
-+	strcpy (info->driver, DRV_MODULE_NAME);
-+	strcpy (info->version, DRV_MODULE_VERSION);
-+	strcpy (info->bus_info, pci_name(pci_dev));
-+}
-+
-+static int b44_nway_reset(struct net_device *dev)
-+{
-+	struct b44 *bp = netdev_priv(dev);
-+	u32 bmcr;
-+	int r;
-+
-+	spin_lock_irq(&bp->lock);
-+	b44_readphy(bp, MII_BMCR, &bmcr);
-+	b44_readphy(bp, MII_BMCR, &bmcr);
-+	r = -EINVAL;
-+	if (bmcr & BMCR_ANENABLE) {
-+		b44_writephy(bp, MII_BMCR,
-+			     bmcr | BMCR_ANRESTART);
-+		r = 0;
-+	}
-+	spin_unlock_irq(&bp->lock);
-+
-+	return r;
-+}
-+
-+static int b44_get_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-+{
-+	struct b44 *bp = netdev_priv(dev);
-+
-+	if (!(bp->flags & B44_FLAG_INIT_COMPLETE))
-+		return -EAGAIN;
-+	cmd->supported = (SUPPORTED_Autoneg);
-+	cmd->supported |= (SUPPORTED_100baseT_Half |
-+			  SUPPORTED_100baseT_Full |
-+			  SUPPORTED_10baseT_Half |
-+			  SUPPORTED_10baseT_Full |
-+			  SUPPORTED_MII);
-+
-+	cmd->advertising = 0;
-+	if (bp->flags & B44_FLAG_ADV_10HALF)
-+		cmd->advertising |= ADVERTISE_10HALF;
-+	if (bp->flags & B44_FLAG_ADV_10FULL)
-+		cmd->advertising |= ADVERTISE_10FULL;
-+	if (bp->flags & B44_FLAG_ADV_100HALF)
-+		cmd->advertising |= ADVERTISE_100HALF;
-+	if (bp->flags & B44_FLAG_ADV_100FULL)
-+		cmd->advertising |= ADVERTISE_100FULL;
-+	cmd->advertising |= ADVERTISE_PAUSE_CAP | ADVERTISE_PAUSE_ASYM;
-+	cmd->speed = (bp->flags & B44_FLAG_100_BASE_T) ?
-+		SPEED_100 : SPEED_10;
-+	cmd->duplex = (bp->flags & B44_FLAG_FULL_DUPLEX) ?
-+		DUPLEX_FULL : DUPLEX_HALF;
-+	cmd->port = 0;
-+	cmd->phy_address = bp->phy_addr;
-+	cmd->transceiver = (bp->flags & B44_FLAG_INTERNAL_PHY) ?
-+		XCVR_INTERNAL : XCVR_EXTERNAL;
-+	cmd->autoneg = (bp->flags & B44_FLAG_FORCE_LINK) ?
-+		AUTONEG_DISABLE : AUTONEG_ENABLE;
-+	cmd->maxtxpkt = 0;
-+	cmd->maxrxpkt = 0;
-+	return 0;
-+}
-+
-+static int b44_set_settings(struct net_device *dev, struct ethtool_cmd *cmd)
-+{
-+	struct b44 *bp = netdev_priv(dev);
-+
-+	if (!(bp->flags & B44_FLAG_INIT_COMPLETE))
-+		return -EAGAIN;
-+
-+	/* We do not support gigabit. */
-+	if (cmd->autoneg == AUTONEG_ENABLE) {
-+		if (cmd->advertising &
-+		    (ADVERTISED_1000baseT_Half |
-+		     ADVERTISED_1000baseT_Full))
-+			return -EINVAL;
-+	} else if ((cmd->speed != SPEED_100 &&
-+		    cmd->speed != SPEED_10) ||
-+		   (cmd->duplex != DUPLEX_HALF &&
-+		    cmd->duplex != DUPLEX_FULL)) {
-+			return -EINVAL;
-+	}
-+
-+	spin_lock_irq(&bp->lock);
-+
-+	if (cmd->autoneg == AUTONEG_ENABLE) {
-+		bp->flags &= ~B44_FLAG_FORCE_LINK;
-+		bp->flags &= ~(B44_FLAG_ADV_10HALF |
-+			       B44_FLAG_ADV_10FULL |
-+			       B44_FLAG_ADV_100HALF |
-+			       B44_FLAG_ADV_100FULL);
-+		if (cmd->advertising & ADVERTISE_10HALF)
-+			bp->flags |= B44_FLAG_ADV_10HALF;
-+		if (cmd->advertising & ADVERTISE_10FULL)
-+			bp->flags |= B44_FLAG_ADV_10FULL;
-+		if (cmd->advertising & ADVERTISE_100HALF)
-+			bp->flags |= B44_FLAG_ADV_100HALF;
-+		if (cmd->advertising & ADVERTISE_100FULL)
-+			bp->flags |= B44_FLAG_ADV_100FULL;
-+	} else {
-+		bp->flags |= B44_FLAG_FORCE_LINK;
-+		if (cmd->speed == SPEED_100)
-+			bp->flags |= B44_FLAG_100_BASE_T;
-+		if (cmd->duplex == DUPLEX_FULL)
-+			bp->flags |= B44_FLAG_FULL_DUPLEX;
-+	}
-+
-+	b44_setup_phy(bp);
-+
-+	spin_unlock_irq(&bp->lock);
-+
-+	return 0;
-+}
++	END(bcm47xx_irq_handler)
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/irq.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/irq.c
+--- linux-2.6.12.5/arch/mips/bcm947xx/irq.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/irq.c	2005-09-16 10:29:18.214585864 +0200
+@@ -0,0 +1,68 @@
++/*
++ *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
++ *
++ *  This program is free software; you can redistribute  it and/or modify it
++ *  under  the terms of  the GNU General  Public License as published by the
++ *  Free Software Foundation;  either version 2 of the  License, or (at your
++ *  option) any later version.
++ *
++ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
++ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
++ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
++ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
++ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
++ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
++ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ *  You should have received a copy of the  GNU General Public License along
++ *  with this program; if not, write  to the Free Software Foundation, Inc.,
++ *  675 Mass Ave, Cambridge, MA 02139, USA.
++ */
 +
-+static void b44_get_ringparam(struct net_device *dev,
-+			      struct ethtool_ringparam *ering)
-+{
-+	struct b44 *bp = netdev_priv(dev);
++#include <linux/config.h>
++#include <linux/errno.h>
++#include <linux/init.h>
++#include <linux/interrupt.h>
++#include <linux/irq.h>
++#include <linux/module.h>
++#include <linux/smp.h>
++#include <linux/types.h>
 +
-+	ering->rx_max_pending = B44_RX_RING_SIZE - 1;
-+	ering->rx_pending = bp->rx_pending;
++#include <asm/cpu.h>
++#include <asm/io.h>
++#include <asm/irq.h>
++#include <asm/irq_cpu.h>
++#include <asm/gdb-stub.h>
 +
-+	/* XXX ethtool lacks a tx_max_pending, oops... */
-+}
++extern asmlinkage void bcm47xx_irq_handler(void);
 +
-+static int b44_set_ringparam(struct net_device *dev,
-+			     struct ethtool_ringparam *ering)
++void bcm47xx_irq_dispatch(struct pt_regs *regs)
 +{
-+	struct b44 *bp = netdev_priv(dev);
-+
-+	if ((ering->rx_pending > B44_RX_RING_SIZE - 1) ||
-+	    (ering->rx_mini_pending != 0) ||
-+	    (ering->rx_jumbo_pending != 0) ||
-+	    (ering->tx_pending > B44_TX_RING_SIZE - 1))
-+		return -EINVAL;
-+
-+	spin_lock_irq(&bp->lock);
++	u32 cause;
 +
-+	bp->rx_pending = ering->rx_pending;
-+	bp->tx_pending = ering->tx_pending;
++	cause = read_c0_cause() & read_c0_status() & CAUSEF_IP;
 +
-+	b44_halt(bp);
-+	b44_init_rings(bp);
-+	b44_init_hw(bp);
-+	netif_wake_queue(bp->dev);
-+	spin_unlock_irq(&bp->lock);
++	clear_c0_status(cause);
 +
-+	b44_enable_ints(bp);
-+	
-+	return 0;
++	if (cause & CAUSEF_IP7)
++		do_IRQ(7, regs);
++	if (cause & CAUSEF_IP2)
++		do_IRQ(2, regs);
++	if (cause & CAUSEF_IP3)
++		do_IRQ(3, regs);
++	if (cause & CAUSEF_IP4)
++		do_IRQ(4, regs);
++	if (cause & CAUSEF_IP5)
++		do_IRQ(5, regs);
++	if (cause & CAUSEF_IP6)
++		do_IRQ(6, regs);
 +}
 +
-+static void b44_get_pauseparam(struct net_device *dev,
-+				struct ethtool_pauseparam *epause)
++void __init arch_init_irq(void)
 +{
-+	struct b44 *bp = netdev_priv(dev);
-+
-+	epause->autoneg =
-+		(bp->flags & B44_FLAG_PAUSE_AUTO) != 0;
-+	epause->rx_pause =
-+		(bp->flags & B44_FLAG_RX_PAUSE) != 0;
-+	epause->tx_pause =
-+		(bp->flags & B44_FLAG_TX_PAUSE) != 0;
++	set_except_vector(0, bcm47xx_irq_handler);
++	mips_cpu_irq_init(0);
 +}
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/prom.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/prom.c
+--- linux-2.6.12.5/arch/mips/bcm947xx/prom.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/prom.c	2005-09-16 10:29:18.214585864 +0200
+@@ -0,0 +1,59 @@
++/*
++ *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
++ *
++ *  This program is free software; you can redistribute  it and/or modify it
++ *  under  the terms of  the GNU General  Public License as published by the
++ *  Free Software Foundation;  either version 2 of the  License, or (at your
++ *  option) any later version.
++ *
++ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
++ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
++ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
++ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
++ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
++ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
++ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ *  You should have received a copy of the  GNU General Public License along
++ *  with this program; if not, write  to the Free Software Foundation, Inc.,
++ *  675 Mass Ave, Cambridge, MA 02139, USA.
++ */
 +
-+static int b44_set_pauseparam(struct net_device *dev,
-+				struct ethtool_pauseparam *epause)
-+{
-+	struct b44 *bp = netdev_priv(dev);
++#include <linux/init.h>
++#include <linux/mm.h>
++#include <linux/sched.h>
++#include <linux/bootmem.h>
 +
-+	spin_lock_irq(&bp->lock);
-+	if (epause->autoneg)
-+		bp->flags |= B44_FLAG_PAUSE_AUTO;
-+	else
-+		bp->flags &= ~B44_FLAG_PAUSE_AUTO;
-+	if (epause->rx_pause)
-+		bp->flags |= B44_FLAG_RX_PAUSE;
-+	else
-+		bp->flags &= ~B44_FLAG_RX_PAUSE;
-+	if (epause->tx_pause)
-+		bp->flags |= B44_FLAG_TX_PAUSE;
-+	else
-+		bp->flags &= ~B44_FLAG_TX_PAUSE;
-+	if (bp->flags & B44_FLAG_PAUSE_AUTO) {
-+		b44_halt(bp);
-+		b44_init_rings(bp);
-+		b44_init_hw(bp);
-+	} else {
-+		__b44_set_flow_ctrl(bp, bp->flags);
-+	}
-+	spin_unlock_irq(&bp->lock);
++#include <asm/addrspace.h>
++#include <asm/bootinfo.h>
++#include <asm/pmon.h>
 +
-+	b44_enable_ints(bp);
-+	
-+	return 0;
++const char *get_system_type(void)
++{
++	return "Broadcom BCM47xx";
 +}
 +
-+static struct ethtool_ops b44_ethtool_ops = {
-+	.get_drvinfo		= b44_get_drvinfo,
-+	.get_settings		= b44_get_settings,
-+	.set_settings		= b44_set_settings,
-+	.nway_reset		= b44_nway_reset,
-+	.get_link		= ethtool_op_get_link,
-+	.get_ringparam		= b44_get_ringparam,
-+	.set_ringparam		= b44_set_ringparam,
-+	.get_pauseparam		= b44_get_pauseparam,
-+	.set_pauseparam		= b44_set_pauseparam,
-+	.get_msglevel		= b44_get_msglevel,
-+	.set_msglevel		= b44_set_msglevel,
-+};
-+
-+static int b44_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
++void __init prom_init(void)
 +{
-+	struct mii_ioctl_data *data = if_mii(ifr);
-+	struct b44 *bp = netdev_priv(dev);
-+	int err;
++	unsigned long mem;
 +
-+	spin_lock_irq(&bp->lock);
-+	err = generic_mii_ioctl(&bp->mii_if, data, cmd, NULL);
-+	spin_unlock_irq(&bp->lock);
++        mips_machgroup = MACH_GROUP_BRCM;
++        mips_machtype = MACH_BCM47XX;
++
++	/* Figure out memory size by finding aliases */
++	for (mem = (1 << 20); mem < (128 << 20); mem += (1 << 20)) {
++		if (*(unsigned long *)((unsigned long)(prom_init) + mem) == 
++		    *(unsigned long *)(prom_init))
++			break;
++	}
 +
-+	return err;
++	add_memory_region(0, mem, BOOT_MEM_RAM);
 +}
 +
-+/* Read 128-bytes of EEPROM. */
-+static int b44_read_eeprom(struct b44 *bp, u8 *data)
++unsigned long __init prom_free_prom_memory(void)
 +{
-+	long i;
-+	u16 *ptr = (u16 *) data;
-+
-+	for (i = 0; i < 128; i += 2)
-+		ptr[i / 2] = readw(bp->regs + 4096 + i);
-+
 +	return 0;
 +}
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/setup.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/setup.c
+--- linux-2.6.12.5/arch/mips/bcm947xx/setup.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/setup.c	2005-09-16 10:29:18.215585712 +0200
+@@ -0,0 +1,127 @@
++/*
++ *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
++ *
++ *  This program is free software; you can redistribute  it and/or modify it
++ *  under  the terms of  the GNU General  Public License as published by the
++ *  Free Software Foundation;  either version 2 of the  License, or (at your
++ *  option) any later version.
++ *
++ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
++ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
++ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
++ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
++ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
++ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
++ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ *  You should have received a copy of the  GNU General Public License along
++ *  with this program; if not, write  to the Free Software Foundation, Inc.,
++ *  675 Mass Ave, Cambridge, MA 02139, USA.
++ */
 +
-+static int __devinit b44_get_invariants(struct b44 *bp)
-+{
-+	u8 eeprom[128];
-+	int err;
-+
-+	err = b44_read_eeprom(bp, &eeprom[0]);
-+	if (err)
-+		goto out;
-+
-+	bp->dev->dev_addr[0] = eeprom[79];
-+	bp->dev->dev_addr[1] = eeprom[78];
-+	bp->dev->dev_addr[2] = eeprom[81];
-+	bp->dev->dev_addr[3] = eeprom[80];
-+	bp->dev->dev_addr[4] = eeprom[83];
-+	bp->dev->dev_addr[5] = eeprom[82];
-+
-+	bp->phy_addr = eeprom[90] & 0x1f;
-+
-+	/* With this, plus the rx_header prepended to the data by the
-+	 * hardware, we'll land the ethernet header on a 2-byte boundary.
-+	 */
-+	bp->rx_offset = 30;
++#include <linux/init.h>
++#include <linux/types.h>
++#include <linux/tty.h>
++#include <linux/serial.h>
++#include <linux/serial_core.h>
++#include <linux/serial_reg.h>
++#include <asm/time.h>
++#include <asm/reboot.h>
 +
-+	bp->imask = IMASK_DEF;
++#include <typedefs.h>
++#include <sbutils.h>
++#include <sbmips.h>
++#include <sbpci.h>
++#include <sbconfig.h>
++#include <bcmdevs.h>
 +
-+	bp->core_unit = ssb_core_unit(bp);
-+	bp->dma_offset = SB_PCI_DMA;
++#if 1
 +
-+	/* XXX - really required? 
-+	   bp->flags |= B44_FLAG_BUGGY_TXPTR;
-+         */
-+out:
-+	return err;
-+}
++#define SER_PORT1(reg)	(*((volatile unsigned char *)(0xb8000400+reg)))
 +
-+static int __devinit b44_init_one(struct pci_dev *pdev,
-+				  const struct pci_device_id *ent)
++int putDebugChar(char c)
 +{
-+	static int b44_version_printed = 0;
-+	unsigned long b44reg_base, b44reg_len;
-+	struct net_device *dev;
-+	struct b44 *bp;
-+	int err, i;
-+
-+	if (b44_version_printed++ == 0)
-+		printk(KERN_INFO "%s", version);
-+
-+	err = pci_enable_device(pdev);
-+	if (err) {
-+		printk(KERN_ERR PFX "Cannot enable PCI device, "
-+		       "aborting.\n");
-+		return err;
-+	}
-+
-+	if (!(pci_resource_flags(pdev, 0) & IORESOURCE_MEM)) {
-+		printk(KERN_ERR PFX "Cannot find proper PCI device "
-+		       "base address, aborting.\n");
-+		err = -ENODEV;
-+		goto err_out_disable_pdev;
-+	}
-+
-+	err = pci_request_regions(pdev, DRV_MODULE_NAME);
-+	if (err) {
-+		printk(KERN_ERR PFX "Cannot obtain PCI resources, "
-+		       "aborting.\n");
-+		goto err_out_disable_pdev;
-+	}
-+
-+	pci_set_master(pdev);
-+
-+	err = pci_set_dma_mask(pdev, (u64) B44_DMA_MASK);
-+	if (err) {
-+		printk(KERN_ERR PFX "No usable DMA configuration, "
-+		       "aborting.\n");
-+		goto err_out_free_res;
-+	}
++	while (!(SER_PORT1(UART_LSR) & UART_LSR_THRE));
++	SER_PORT1(UART_TX) = c;
 +	
-+	err = pci_set_consistent_dma_mask(pdev, (u64) B44_DMA_MASK);
-+	if (err) {
-+	  printk(KERN_ERR PFX "No usable DMA configuration, "
-+		 "aborting.\n");
-+	  goto err_out_free_res;
-+	}
++	return 1;
++}
 +
-+	b44reg_base = pci_resource_start(pdev, 0);
-+	b44reg_len = pci_resource_len(pdev, 0);
++char getDebugChar(void)
++{
++	while (!(SER_PORT1(UART_LSR) & 1));
++	return SER_PORT1(UART_RX);
++}
 +
-+	dev = alloc_etherdev(sizeof(*bp));
-+	if (!dev) {
-+		printk(KERN_ERR PFX "Etherdev alloc failed, aborting.\n");
-+		err = -ENOMEM;
-+		goto err_out_free_res;
-+	}
 +
-+	SET_MODULE_OWNER(dev);
-+	SET_NETDEV_DEV(dev,&pdev->dev);
++static int ser_line = 0;
 +
-+	/* No interesting netdevice features in this card... */
-+	dev->features |= 0;
++static void
++serial_add(void *regs, uint irq, uint baud_base, uint reg_shift)
++{
++	struct uart_port s;
 +
-+	bp = netdev_priv(dev);
-+	bp->pdev = pdev;
-+	bp->dev = dev;
-+	if (b44_debug >= 0)
-+		bp->msg_enable = (1 << b44_debug) - 1;
-+	else
-+		bp->msg_enable = B44_DEF_MSG_ENABLE;
++	memset(&s, 0, sizeof(s));
 +
-+	spin_lock_init(&bp->lock);
++	s.line = ser_line++;
++	s.membase = regs;
++	s.irq = irq + 2;
++	s.uartclk = baud_base;
++	s.flags = ASYNC_BOOT_AUTOCONF;
++	s.iotype = SERIAL_IO_MEM;
++	s.regshift = reg_shift;
 +
-+	bp->regs = ioremap(b44reg_base, b44reg_len);
-+	if (bp->regs == 0UL) {
-+		printk(KERN_ERR PFX "Cannot map device registers, "
-+		       "aborting.\n");
-+		err = -ENOMEM;
-+		goto err_out_free_dev;
++	if (early_serial_setup(&s) != 0) {
++		printk(KERN_ERR "Serial setup failed!\n");
 +	}
-+
-+	bp->rx_pending = B44_DEF_RX_RING_PENDING;
-+	bp->tx_pending = B44_DEF_TX_RING_PENDING;
-+
-+	dev->open = b44_open;
-+	dev->stop = b44_close;
-+	dev->hard_start_xmit = b44_start_xmit;
-+	dev->get_stats = b44_get_stats;
-+	dev->set_multicast_list = b44_set_rx_mode;
-+	dev->set_mac_address = b44_set_mac_addr;
-+	dev->do_ioctl = b44_ioctl;
-+	dev->tx_timeout = b44_tx_timeout;
-+	dev->poll = b44_poll;
-+	dev->weight = 64;
-+	dev->watchdog_timeo = B44_TX_TIMEOUT;
-+#ifdef CONFIG_NET_POLL_CONTROLLER
-+	dev->poll_controller = b44_poll_controller;
++}
 +#endif
-+	dev->change_mtu = b44_change_mtu;
-+	dev->irq = pdev->irq;
-+	SET_ETHTOOL_OPS(dev, &b44_ethtool_ops);
-+
-+	err = b44_get_invariants(bp);
-+	if (err) {
-+		printk(KERN_ERR PFX "Problem fetching invariants of chip, "
-+		       "aborting.\n");
-+		goto err_out_iounmap;
-+	}
-+
-+	bp->mii_if.dev = dev;
-+	bp->mii_if.mdio_read = b44_mii_read;
-+	bp->mii_if.mdio_write = b44_mii_write;
-+	bp->mii_if.phy_id = bp->phy_addr;
-+	bp->mii_if.phy_id_mask = 0x1f;
-+	bp->mii_if.reg_num_mask = 0x1f;
-+
-+	/* By default, advertise all speed/duplex settings. */
-+	bp->flags |= (B44_FLAG_ADV_10HALF | B44_FLAG_ADV_10FULL |
-+		      B44_FLAG_ADV_100HALF | B44_FLAG_ADV_100FULL);
-+
-+	/* By default, auto-negotiate PAUSE. */
-+	bp->flags |= B44_FLAG_PAUSE_AUTO;
-+
-+	err = register_netdev(dev);
-+	if (err) {
-+		printk(KERN_ERR PFX "Cannot register net device, "
-+		       "aborting.\n");
-+		goto err_out_iounmap;
-+	}
-+
-+	pci_set_drvdata(pdev, dev);
-+
-+	pci_save_state(bp->pdev);
-+
-+	printk(KERN_INFO "%s: Broadcom 4400 10/100BaseT Ethernet ", dev->name);
-+	for (i = 0; i < 6; i++)
-+		printk("%2.2x%c", dev->dev_addr[i],
-+		       i == 5 ? '\n' : ':');
 +
-+	return 0;
-+
-+err_out_iounmap:
-+	iounmap(bp->regs);
++extern void bcm47xx_time_init(void);
++extern void bcm47xx_timer_setup(struct irqaction *irq);
 +
-+err_out_free_dev:
-+	free_netdev(dev);
++void *nvram_get(char *foo)
++{
++	return NULL;
++}
 +
-+err_out_free_res:
-+	pci_release_regions(pdev);
++void *sbh;
 +
-+err_out_disable_pdev:
-+	pci_disable_device(pdev);
-+	pci_set_drvdata(pdev, NULL);
-+	return err;
++static void bcm47xx_machine_restart(char *command)
++{
++	/* Set the watchdog timer to reset immediately */
++	local_irq_disable();
++	sb_watchdog(sbh, 1);
++	while (1);
 +}
 +
-+static void __devexit b44_remove_one(struct pci_dev *pdev)
++static void bcm47xx_machine_halt(void)
 +{
-+	struct net_device *dev = pci_get_drvdata(pdev);
-+
-+	if (dev) {
-+		struct b44 *bp = netdev_priv(dev);
-+
-+		unregister_netdev(dev);
-+		iounmap(bp->regs);
-+		free_netdev(dev);
-+		pci_release_regions(pdev);
-+		pci_disable_device(pdev);
-+		pci_set_drvdata(pdev, NULL);
-+	}
++	/* Disable interrupts and watchdog and spin forever */
++	local_irq_disable();
++	sb_watchdog(sbh, 0);
++	while (1);
 +}
 +
-+static int b44_suspend(struct pci_dev *pdev, pm_message_t state)
++static int __init bcm47xx_init(void)
 +{
-+	struct net_device *dev = pci_get_drvdata(pdev);
-+	struct b44 *bp = netdev_priv(dev);
 +
-+        if (!netif_running(dev))
-+                 return 0;
-+
-+	del_timer_sync(&bp->timer);
++	sbh = sb_kattach();
++	sb_mips_init(sbh);
++	sbpci_init(sbh);
++	sb_serial_init(sbh, serial_add);
 +
-+	spin_lock_irq(&bp->lock); 
++	_machine_restart = bcm47xx_machine_restart;
++	_machine_halt = bcm47xx_machine_halt;
++	_machine_power_off = bcm47xx_machine_halt;
++	
++	board_time_init = bcm47xx_time_init;
++	board_timer_setup = bcm47xx_timer_setup;
++	
++	return 0;
++}
 +
-+	b44_halt(bp);
-+	netif_carrier_off(bp->dev); 
-+	netif_device_detach(bp->dev);
-+	b44_free_rings(bp);
++early_initcall(bcm47xx_init);
+diff -Nur linux-2.6.12.5/arch/mips/bcm947xx/time.c linux-2.6.12.5-brcm/arch/mips/bcm947xx/time.c
+--- linux-2.6.12.5/arch/mips/bcm947xx/time.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/bcm947xx/time.c	2005-09-16 10:29:18.215585712 +0200
+@@ -0,0 +1,59 @@
++/*
++ *  Copyright (C) 2004 Florian Schirmer (jolt@tuxbox.org)
++ *
++ *  This program is free software; you can redistribute  it and/or modify it
++ *  under  the terms of  the GNU General  Public License as published by the
++ *  Free Software Foundation;  either version 2 of the  License, or (at your
++ *  option) any later version.
++ *
++ *  THIS  SOFTWARE  IS PROVIDED   ``AS  IS'' AND   ANY  EXPRESS OR IMPLIED
++ *  WARRANTIES,   INCLUDING, BUT NOT  LIMITED  TO, THE IMPLIED WARRANTIES OF
++ *  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN
++ *  NO  EVENT  SHALL   THE AUTHOR  BE    LIABLE FOR ANY   DIRECT, INDIRECT,
++ *  INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
++ *  NOT LIMITED   TO, PROCUREMENT OF  SUBSTITUTE GOODS  OR SERVICES; LOSS OF
++ *  USE, DATA,  OR PROFITS; OR  BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
++ *  ANY THEORY OF LIABILITY, WHETHER IN  CONTRACT, STRICT LIABILITY, OR TORT
++ *  (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
++ *  THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
++ *
++ *  You should have received a copy of the  GNU General Public License along
++ *  with this program; if not, write  to the Free Software Foundation, Inc.,
++ *  675 Mass Ave, Cambridge, MA 02139, USA.
++ */
 +
-+	spin_unlock_irq(&bp->lock);
-+	return 0;
-+}
++#include <linux/config.h>
++#include <linux/init.h>
++#include <linux/kernel.h>
++#include <linux/sched.h>
++#include <linux/serial_reg.h>
++#include <linux/interrupt.h>
++#include <asm/addrspace.h>
++#include <asm/io.h>
++#include <asm/time.h>
 +
-+static int b44_resume(struct pci_dev *pdev)
++void __init
++bcm47xx_time_init(void)
 +{
-+	struct net_device *dev = pci_get_drvdata(pdev);
-+	struct b44 *bp = netdev_priv(dev);
-+
-+	pci_restore_state(pdev);
-+
-+	if (!netif_running(dev))
-+		return 0;
++	unsigned int hz;
 +
-+	spin_lock_irq(&bp->lock);
++	/*
++	 * Use deterministic values for initial counter interrupt
++	 * so that calibrate delay avoids encountering a counter wrap.
++	 */
++	write_c0_count(0);
++	write_c0_compare(0xffff);
 +
-+	b44_init_rings(bp);
-+	b44_init_hw(bp);
-+	netif_device_attach(bp->dev);
-+	spin_unlock_irq(&bp->lock);
++	hz = 200 * 1000 * 1000;
 +
-+	bp->timer.expires = jiffies + HZ;
-+	add_timer(&bp->timer);
++	/* Set MIPS counter frequency for fixed_rate_gettimeoffset() */
++	mips_hpt_frequency = hz / 2;
 +
-+	b44_enable_ints(bp);
-+	return 0;
 +}
 +
-+static struct pci_driver b44_driver = {
-+	.name		= DRV_MODULE_NAME,
-+	.id_table	= b44_pci_tbl,
-+	.probe		= b44_init_one,
-+	.remove		= __devexit_p(b44_remove_one),
-+        .suspend        = b44_suspend,
-+        .resume         = b44_resume,
-+};
-+
-+static int __init b44_init(void)
++void __init
++bcm47xx_timer_setup(struct irqaction *irq)
 +{
-+	return pci_module_init(&b44_driver);
++	/* Enable the timer interrupt */
++	setup_irq(7, irq);
 +}
-+
-+static void __exit b44_cleanup(void)
+diff -Nur linux-2.6.12.5/arch/mips/kernel/cpu-probe.c linux-2.6.12.5-brcm/arch/mips/kernel/cpu-probe.c
+--- linux-2.6.12.5/arch/mips/kernel/cpu-probe.c	2005-08-15 02:20:18.000000000 +0200
++++ linux-2.6.12.5-brcm/arch/mips/kernel/cpu-probe.c	2005-09-16 10:29:18.243581456 +0200
+@@ -555,6 +555,28 @@
+ 	}
+ }
+ 
++static inline void cpu_probe_broadcom(struct cpuinfo_mips *c)
 +{
-+	pci_unregister_driver(&b44_driver);
++	decode_config1(c);
++	switch (c->processor_id & 0xff00) {
++		case PRID_IMP_BCM3302:
++			c->cputype = CPU_BCM3302;
++			c->isa_level = MIPS_CPU_ISA_M32;
++			c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
++					MIPS_CPU_4KTLB | MIPS_CPU_COUNTER;
++		break;
++		case PRID_IMP_BCM4710:
++			c->cputype = CPU_BCM4710;
++			c->isa_level = MIPS_CPU_ISA_M32;
++			c->options = MIPS_CPU_TLB | MIPS_CPU_4KEX |
++					MIPS_CPU_4KTLB | MIPS_CPU_COUNTER;
++		break;
++	default:
++		c->cputype = CPU_UNKNOWN;
++		break;
++	}
 +}
 +
-+module_init(b44_init);
-+module_exit(b44_cleanup);
-+
-diff -Nur linux-2.6.12.5/drivers/net/b44.h linux-2.6.12.5-brcm/drivers/net/b44.h
---- linux-2.6.12.5/drivers/net/b44.h	2005-08-15 02:20:18.000000000 +0200
-+++ linux-2.6.12.5-brcm/drivers/net/b44.h	2005-08-28 11:12:20.694819024 +0200
-@@ -292,6 +292,9 @@
- #define SSB_PCI_MASK1		0xfc000000
- #define SSB_PCI_MASK2		0xc0000000
+ __init void cpu_probe(void)
+ {
+ 	struct cpuinfo_mips *c = &current_cpu_data;
+@@ -577,7 +599,9 @@
+ 	case PRID_COMP_SIBYTE:
+ 		cpu_probe_sibyte(c);
+ 		break;
+-
++	case PRID_COMP_BROADCOM:
++		cpu_probe_broadcom(c);
++		break;
+ 	case PRID_COMP_SANDCRAFT:
+ 		cpu_probe_sandcraft(c);
+ 		break;
+diff -Nur linux-2.6.12.5/arch/mips/kernel/head.S linux-2.6.12.5-brcm/arch/mips/kernel/head.S
+--- linux-2.6.12.5/arch/mips/kernel/head.S	2005-08-15 02:20:18.000000000 +0200
++++ linux-2.6.12.5-brcm/arch/mips/kernel/head.S	2005-09-16 10:29:18.244581304 +0200
+@@ -122,6 +122,14 @@
+ #endif
+ 	.endm
  
-+#define br32(REG)	readl(bp->regs + (REG))
-+#define bw32(REG,VAL)	writel((VAL), bp->regs + (REG))
++#ifdef CONFIG_BCM4710
++#undef eret
++#define eret nop; nop; eret
++#endif
++
++	j	kernel_entry
++	nop
 +
- /* 4400 PHY registers */
- #define B44_MII_AUXCTRL		24	/* Auxiliary Control */
- #define  MII_AUXCTRL_DUPLEX	0x0001  /* Full Duplex */
-@@ -345,6 +348,8 @@
+ 	/*
+ 	 * Reserved space for exception handlers.
+ 	 * Necessary for machines which link their kernels at KSEG0.
+diff -Nur linux-2.6.12.5/arch/mips/kernel/proc.c linux-2.6.12.5-brcm/arch/mips/kernel/proc.c
+--- linux-2.6.12.5/arch/mips/kernel/proc.c	2005-08-15 02:20:18.000000000 +0200
++++ linux-2.6.12.5-brcm/arch/mips/kernel/proc.c	2005-09-16 10:29:18.250580392 +0200
+@@ -75,7 +75,9 @@
+ 	[CPU_VR4133]	"NEC VR4133",
+ 	[CPU_VR4181]	"NEC VR4181",
+ 	[CPU_VR4181A]	"NEC VR4181A",
+-	[CPU_SR71000]	"Sandcraft SR71000"
++	[CPU_SR71000]	"Sandcraft SR71000",
++	[CPU_BCM3302]	"Broadcom BCM3302",
++	[CPU_BCM4710]	"Broadcom BCM4710"
  };
  
- #define B44_MCAST_TABLE_SIZE	32
-+#define B44_PHY_ADDR_NO_PHY	30
-+#define B44_MDC_RATIO		5000000
  
- /* SW copy of device statistics, kept up to date by periodic timer
-  * which probes HW values.  Must have same relative layout as HW
-@@ -410,7 +415,7 @@
- 	struct net_device_stats	stats;
- 	struct b44_hw_stats	hw_stats;
+diff -Nur linux-2.6.12.5/arch/mips/mm/tlbex.c linux-2.6.12.5-brcm/arch/mips/mm/tlbex.c
+--- linux-2.6.12.5/arch/mips/mm/tlbex.c	2005-08-15 02:20:18.000000000 +0200
++++ linux-2.6.12.5-brcm/arch/mips/mm/tlbex.c	2005-09-16 10:29:18.273576896 +0200
+@@ -851,6 +851,8 @@
+ 	case CPU_4KSC:
+ 	case CPU_20KC:
+ 	case CPU_25KF:
++	case CPU_BCM3302:
++	case CPU_BCM4710:
+ 		tlbw(p);
+ 		break;
  
--	void __iomem		*regs;
-+	unsigned long		regs;
- 	struct pci_dev		*pdev;
- 	struct net_device	*dev;
+diff -Nur linux-2.6.12.5/arch/mips/pci/Makefile linux-2.6.12.5-brcm/arch/mips/pci/Makefile
+--- linux-2.6.12.5/arch/mips/pci/Makefile	2005-08-15 02:20:18.000000000 +0200
++++ linux-2.6.12.5-brcm/arch/mips/pci/Makefile	2005-09-16 10:29:18.311571120 +0200
+@@ -18,6 +18,7 @@
+ obj-$(CONFIG_MIPS_TX3927)	+= ops-jmr3927.o
+ obj-$(CONFIG_PCI_VR41XX)	+= ops-vr41xx.o pci-vr41xx.o
+ obj-$(CONFIG_NEC_CMBVR4133)	+= fixup-vr4133.o
++obj-$(CONFIG_BCM947XX)		+= ops-sb.o fixup-bcm47xx.o pci-bcm47xx.o
  
-diff -Nur linux-2.6.12.5/drivers/net/b44.h.orig linux-2.6.12.5-brcm/drivers/net/b44.h.orig
---- linux-2.6.12.5/drivers/net/b44.h.orig	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/drivers/net/b44.h.orig	2005-08-15 02:20:18.000000000 +0200
-@@ -0,0 +1,427 @@
-+#ifndef _B44_H
-+#define _B44_H
-+
-+/* Register layout. (These correspond to struct _bcmenettregs in bcm4400.) */
-+#define	B44_DEVCTRL	0x0000UL /* Device Control */
-+#define  DEVCTRL_MPM		0x00000040 /* Magic Packet PME Enable (B0 only) */
-+#define  DEVCTRL_PFE		0x00000080 /* Pattern Filtering Enable */
-+#define  DEVCTRL_IPP		0x00000400 /* Internal EPHY Present */
-+#define  DEVCTRL_EPR		0x00008000 /* EPHY Reset */
-+#define  DEVCTRL_PME		0x00001000 /* PHY Mode Enable */
-+#define  DEVCTRL_PMCE		0x00002000 /* PHY Mode Clocks Enable */
-+#define  DEVCTRL_PADDR		0x0007c000 /* PHY Address */
-+#define  DEVCTRL_PADDR_SHIFT	18
-+#define B44_BIST_STAT	0x000CUL /* Built-In Self-Test Status */
-+#define B44_WKUP_LEN	0x0010UL /* Wakeup Length */
-+#define  WKUP_LEN_P0_MASK	0x0000007f /* Pattern 0 */
-+#define  WKUP_LEN_D0		0x00000080
-+#define  WKUP_LEN_P1_MASK	0x00007f00 /* Pattern 1 */
-+#define  WKUP_LEN_P1_SHIFT	8
-+#define  WKUP_LEN_D1		0x00008000
-+#define  WKUP_LEN_P2_MASK	0x007f0000 /* Pattern 2 */
-+#define  WKUP_LEN_P2_SHIFT	16
-+#define  WKUP_LEN_D2		0x00000000
-+#define  WKUP_LEN_P3_MASK	0x7f000000 /* Pattern 3 */
-+#define  WKUP_LEN_P3_SHIFT	24
-+#define  WKUP_LEN_D3		0x80000000
-+#define B44_ISTAT	0x0020UL /* Interrupt Status */
-+#define  ISTAT_LS		0x00000020 /* Link Change (B0 only) */
-+#define  ISTAT_PME		0x00000040 /* Power Management Event */
-+#define  ISTAT_TO		0x00000080 /* General Purpose Timeout */
-+#define  ISTAT_DSCE		0x00000400 /* Descriptor Error */
-+#define  ISTAT_DATAE		0x00000800 /* Data Error */
-+#define  ISTAT_DPE		0x00001000 /* Descr. Protocol Error */
-+#define  ISTAT_RDU		0x00002000 /* Receive Descr. Underflow */
-+#define  ISTAT_RFO		0x00004000 /* Receive FIFO Overflow */
-+#define  ISTAT_TFU		0x00008000 /* Transmit FIFO Underflow */
-+#define  ISTAT_RX		0x00010000 /* RX Interrupt */
-+#define  ISTAT_TX		0x01000000 /* TX Interrupt */
-+#define  ISTAT_EMAC		0x04000000 /* EMAC Interrupt */
-+#define  ISTAT_MII_WRITE	0x08000000 /* MII Write Interrupt */
-+#define  ISTAT_MII_READ		0x10000000 /* MII Read Interrupt */
-+#define  ISTAT_ERRORS (ISTAT_DSCE|ISTAT_DATAE|ISTAT_DPE|ISTAT_RDU|ISTAT_RFO|ISTAT_TFU)
-+#define B44_IMASK	0x0024UL /* Interrupt Mask */
-+#define  IMASK_DEF		(ISTAT_ERRORS | ISTAT_TO | ISTAT_RX | ISTAT_TX)
-+#define B44_GPTIMER	0x0028UL /* General Purpose Timer */
-+#define B44_ADDR_LO	0x0088UL /* ENET Address Lo (B0 only) */
-+#define B44_ADDR_HI	0x008CUL /* ENET Address Hi (B0 only) */
-+#define B44_FILT_ADDR	0x0090UL /* ENET Filter Address */
-+#define B44_FILT_DATA	0x0094UL /* ENET Filter Data */
-+#define B44_TXBURST	0x00A0UL /* TX Max Burst Length */
-+#define B44_RXBURST	0x00A4UL /* RX Max Burst Length */
-+#define B44_MAC_CTRL	0x00A8UL /* MAC Control */
-+#define  MAC_CTRL_CRC32_ENAB	0x00000001 /* CRC32 Generation Enable */
-+#define  MAC_CTRL_PHY_PDOWN	0x00000004 /* Onchip EPHY Powerdown */
-+#define  MAC_CTRL_PHY_EDET	0x00000008 /* Onchip EPHY Energy Detected */
-+#define  MAC_CTRL_PHY_LEDCTRL	0x000000e0 /* Onchip EPHY LED Control */
-+#define  MAC_CTRL_PHY_LEDCTRL_SHIFT 5
-+#define B44_MAC_FLOW	0x00ACUL /* MAC Flow Control */
-+#define  MAC_FLOW_RX_HI_WATER	0x000000ff /* Receive FIFO HI Water Mark */
-+#define  MAC_FLOW_PAUSE_ENAB	0x00008000 /* Enable Pause Frame Generation */
-+#define B44_RCV_LAZY	0x0100UL /* Lazy Interrupt Control */
-+#define  RCV_LAZY_TO_MASK	0x00ffffff /* Timeout */
-+#define  RCV_LAZY_FC_MASK	0xff000000 /* Frame Count */
-+#define  RCV_LAZY_FC_SHIFT	24
-+#define B44_DMATX_CTRL	0x0200UL /* DMA TX Control */
-+#define  DMATX_CTRL_ENABLE	0x00000001 /* Enable */
-+#define  DMATX_CTRL_SUSPEND	0x00000002 /* Suepend Request */
-+#define  DMATX_CTRL_LPBACK	0x00000004 /* Loopback Enable */
-+#define  DMATX_CTRL_FAIRPRIOR	0x00000008 /* Fair Priority */
-+#define  DMATX_CTRL_FLUSH	0x00000010 /* Flush Request */
-+#define B44_DMATX_ADDR	0x0204UL /* DMA TX Descriptor Ring Address */
-+#define B44_DMATX_PTR	0x0208UL /* DMA TX Last Posted Descriptor */
-+#define B44_DMATX_STAT	0x020CUL /* DMA TX Current Active Desc. + Status */
-+#define  DMATX_STAT_CDMASK	0x00000fff /* Current Descriptor Mask */
-+#define  DMATX_STAT_SMASK	0x0000f000 /* State Mask */
-+#define  DMATX_STAT_SDISABLED	0x00000000 /* State Disabled */
-+#define  DMATX_STAT_SACTIVE	0x00001000 /* State Active */
-+#define  DMATX_STAT_SIDLE	0x00002000 /* State Idle Wait */
-+#define  DMATX_STAT_SSTOPPED	0x00003000 /* State Stopped */
-+#define  DMATX_STAT_SSUSP	0x00004000 /* State Suspend Pending */
-+#define  DMATX_STAT_EMASK	0x000f0000 /* Error Mask */
-+#define  DMATX_STAT_ENONE	0x00000000 /* Error None */
-+#define  DMATX_STAT_EDPE	0x00010000 /* Error Desc. Protocol Error */
-+#define  DMATX_STAT_EDFU	0x00020000 /* Error Data FIFO Underrun */
-+#define  DMATX_STAT_EBEBR	0x00030000 /* Error Bus Error on Buffer Read */
-+#define  DMATX_STAT_EBEDA	0x00040000 /* Error Bus Error on Desc. Access */
-+#define  DMATX_STAT_FLUSHED	0x00100000 /* Flushed */
-+#define B44_DMARX_CTRL	0x0210UL /* DMA RX Control */
-+#define  DMARX_CTRL_ENABLE	0x00000001 /* Enable */
-+#define  DMARX_CTRL_ROMASK	0x000000fe /* Receive Offset Mask */
-+#define  DMARX_CTRL_ROSHIFT	1 	   /* Receive Offset Shift */
-+#define B44_DMARX_ADDR	0x0214UL /* DMA RX Descriptor Ring Address */
-+#define B44_DMARX_PTR	0x0218UL /* DMA RX Last Posted Descriptor */
-+#define B44_DMARX_STAT	0x021CUL /* DMA RX Current Active Desc. + Status */
-+#define  DMARX_STAT_CDMASK	0x00000fff /* Current Descriptor Mask */
-+#define  DMARX_STAT_SMASK	0x0000f000 /* State Mask */
-+#define  DMARX_STAT_SDISABLED	0x00000000 /* State Disbaled */
-+#define  DMARX_STAT_SACTIVE	0x00001000 /* State Active */
-+#define  DMARX_STAT_SIDLE	0x00002000 /* State Idle Wait */
-+#define  DMARX_STAT_SSTOPPED	0x00003000 /* State Stopped */
-+#define  DMARX_STAT_EMASK	0x000f0000 /* Error Mask */
-+#define  DMARX_STAT_ENONE	0x00000000 /* Error None */
-+#define  DMARX_STAT_EDPE	0x00010000 /* Error Desc. Protocol Error */
-+#define  DMARX_STAT_EDFO	0x00020000 /* Error Data FIFO Overflow */
-+#define  DMARX_STAT_EBEBW	0x00030000 /* Error Bus Error on Buffer Write */
-+#define  DMARX_STAT_EBEDA	0x00040000 /* Error Bus Error on Desc. Access */
-+#define B44_DMAFIFO_AD	0x0220UL /* DMA FIFO Diag Address */
-+#define  DMAFIFO_AD_OMASK	0x0000ffff /* Offset Mask */
-+#define  DMAFIFO_AD_SMASK	0x000f0000 /* Select Mask */
-+#define  DMAFIFO_AD_SXDD	0x00000000 /* Select Transmit DMA Data */
-+#define  DMAFIFO_AD_SXDP	0x00010000 /* Select Transmit DMA Pointers */
-+#define  DMAFIFO_AD_SRDD	0x00040000 /* Select Receive DMA Data */
-+#define  DMAFIFO_AD_SRDP	0x00050000 /* Select Receive DMA Pointers */
-+#define  DMAFIFO_AD_SXFD	0x00080000 /* Select Transmit FIFO Data */
-+#define  DMAFIFO_AD_SXFP	0x00090000 /* Select Transmit FIFO Pointers */
-+#define  DMAFIFO_AD_SRFD	0x000c0000 /* Select Receive FIFO Data */
-+#define  DMAFIFO_AD_SRFP	0x000c0000 /* Select Receive FIFO Pointers */
-+#define B44_DMAFIFO_LO	0x0224UL /* DMA FIFO Diag Low Data */
-+#define B44_DMAFIFO_HI	0x0228UL /* DMA FIFO Diag High Data */
-+#define B44_RXCONFIG	0x0400UL /* EMAC RX Config */
-+#define  RXCONFIG_DBCAST	0x00000001 /* Disable Broadcast */
-+#define  RXCONFIG_ALLMULTI	0x00000002 /* Accept All Multicast */
-+#define  RXCONFIG_NORX_WHILE_TX	0x00000004 /* Receive Disable While Transmitting */
-+#define  RXCONFIG_PROMISC	0x00000008 /* Promiscuous Enable */
-+#define  RXCONFIG_LPBACK	0x00000010 /* Loopback Enable */
-+#define  RXCONFIG_FLOW		0x00000020 /* Flow Control Enable */
-+#define  RXCONFIG_FLOW_ACCEPT	0x00000040 /* Accept Unicast Flow Control Frame */
-+#define  RXCONFIG_RFILT		0x00000080 /* Reject Filter */
-+#define B44_RXMAXLEN	0x0404UL /* EMAC RX Max Packet Length */
-+#define B44_TXMAXLEN	0x0408UL /* EMAC TX Max Packet Length */
-+#define B44_MDIO_CTRL	0x0410UL /* EMAC MDIO Control */
-+#define  MDIO_CTRL_MAXF_MASK	0x0000007f /* MDC Frequency */
-+#define  MDIO_CTRL_PREAMBLE	0x00000080 /* MII Preamble Enable */
-+#define B44_MDIO_DATA	0x0414UL /* EMAC MDIO Data */
-+#define  MDIO_DATA_DATA		0x0000ffff /* R/W Data */
-+#define  MDIO_DATA_TA_MASK	0x00030000 /* Turnaround Value */
-+#define  MDIO_DATA_TA_SHIFT	16
-+#define  MDIO_TA_VALID		2
-+#define  MDIO_DATA_RA_MASK	0x007c0000 /* Register Address */
-+#define  MDIO_DATA_RA_SHIFT	18
-+#define  MDIO_DATA_PMD_MASK	0x0f800000 /* Physical Media Device */
-+#define  MDIO_DATA_PMD_SHIFT	23
-+#define  MDIO_DATA_OP_MASK	0x30000000 /* Opcode */
-+#define  MDIO_DATA_OP_SHIFT	28
-+#define  MDIO_OP_WRITE		1
-+#define  MDIO_OP_READ		2
-+#define  MDIO_DATA_SB_MASK	0xc0000000 /* Start Bits */
-+#define  MDIO_DATA_SB_SHIFT	30
-+#define  MDIO_DATA_SB_START	0x40000000 /* Start Of Frame */
-+#define B44_EMAC_IMASK	0x0418UL /* EMAC Interrupt Mask */
-+#define B44_EMAC_ISTAT	0x041CUL /* EMAC Interrupt Status */
-+#define  EMAC_INT_MII		0x00000001 /* MII MDIO Interrupt */
-+#define  EMAC_INT_MIB		0x00000002 /* MIB Interrupt */
-+#define  EMAC_INT_FLOW		0x00000003 /* Flow Control Interrupt */
-+#define B44_CAM_DATA_LO	0x0420UL /* EMAC CAM Data Low */
-+#define B44_CAM_DATA_HI	0x0424UL /* EMAC CAM Data High */
-+#define  CAM_DATA_HI_VALID	0x00010000 /* Valid Bit */
-+#define B44_CAM_CTRL	0x0428UL /* EMAC CAM Control */
-+#define  CAM_CTRL_ENABLE	0x00000001 /* CAM Enable */
-+#define  CAM_CTRL_MSEL		0x00000002 /* Mask Select */
-+#define  CAM_CTRL_READ		0x00000004 /* Read */
-+#define  CAM_CTRL_WRITE		0x00000008 /* Read */
-+#define  CAM_CTRL_INDEX_MASK	0x003f0000 /* Index Mask */
-+#define  CAM_CTRL_INDEX_SHIFT	16
-+#define  CAM_CTRL_BUSY		0x80000000 /* CAM Busy */
-+#define B44_ENET_CTRL	0x042CUL /* EMAC ENET Control */
-+#define  ENET_CTRL_ENABLE	0x00000001 /* EMAC Enable */
-+#define  ENET_CTRL_DISABLE	0x00000002 /* EMAC Disable */
-+#define  ENET_CTRL_SRST		0x00000004 /* EMAC Soft Reset */
-+#define  ENET_CTRL_EPSEL	0x00000008 /* External PHY Select */
-+#define B44_TX_CTRL	0x0430UL /* EMAC TX Control */
-+#define  TX_CTRL_DUPLEX		0x00000001 /* Full Duplex */
-+#define  TX_CTRL_FMODE		0x00000002 /* Flow Mode */
-+#define  TX_CTRL_SBENAB		0x00000004 /* Single Backoff Enable */
-+#define  TX_CTRL_SMALL_SLOT	0x00000008 /* Small Slottime */
-+#define B44_TX_WMARK	0x0434UL /* EMAC TX Watermark */
-+#define B44_MIB_CTRL	0x0438UL /* EMAC MIB Control */
-+#define  MIB_CTRL_CLR_ON_READ	0x00000001 /* Autoclear on Read */
-+#define B44_TX_GOOD_O	0x0500UL /* MIB TX Good Octets */
-+#define B44_TX_GOOD_P	0x0504UL /* MIB TX Good Packets */
-+#define B44_TX_O	0x0508UL /* MIB TX Octets */
-+#define B44_TX_P	0x050CUL /* MIB TX Packets */
-+#define B44_TX_BCAST	0x0510UL /* MIB TX Broadcast Packets */
-+#define B44_TX_MCAST	0x0514UL /* MIB TX Multicast Packets */
-+#define B44_TX_64	0x0518UL /* MIB TX <= 64 byte Packets */
-+#define B44_TX_65_127	0x051CUL /* MIB TX 65 to 127 byte Packets */
-+#define B44_TX_128_255	0x0520UL /* MIB TX 128 to 255 byte Packets */
-+#define B44_TX_256_511	0x0524UL /* MIB TX 256 to 511 byte Packets */
-+#define B44_TX_512_1023	0x0528UL /* MIB TX 512 to 1023 byte Packets */
-+#define B44_TX_1024_MAX	0x052CUL /* MIB TX 1024 to max byte Packets */
-+#define B44_TX_JABBER	0x0530UL /* MIB TX Jabber Packets */
-+#define B44_TX_OSIZE	0x0534UL /* MIB TX Oversize Packets */
-+#define B44_TX_FRAG	0x0538UL /* MIB TX Fragment Packets */
-+#define B44_TX_URUNS	0x053CUL /* MIB TX Underruns */
-+#define B44_TX_TCOLS	0x0540UL /* MIB TX Total Collisions */
-+#define B44_TX_SCOLS	0x0544UL /* MIB TX Single Collisions */
-+#define B44_TX_MCOLS	0x0548UL /* MIB TX Multiple Collisions */
-+#define B44_TX_ECOLS	0x054CUL /* MIB TX Excessive Collisions */
-+#define B44_TX_LCOLS	0x0550UL /* MIB TX Late Collisions */
-+#define B44_TX_DEFERED	0x0554UL /* MIB TX Defered Packets */
-+#define B44_TX_CLOST	0x0558UL /* MIB TX Carrier Lost */
-+#define B44_TX_PAUSE	0x055CUL /* MIB TX Pause Packets */
-+#define B44_RX_GOOD_O	0x0580UL /* MIB RX Good Octets */
-+#define B44_RX_GOOD_P	0x0584UL /* MIB RX Good Packets */
-+#define B44_RX_O	0x0588UL /* MIB RX Octets */
-+#define B44_RX_P	0x058CUL /* MIB RX Packets */
-+#define B44_RX_BCAST	0x0590UL /* MIB RX Broadcast Packets */
-+#define B44_RX_MCAST	0x0594UL /* MIB RX Multicast Packets */
-+#define B44_RX_64	0x0598UL /* MIB RX <= 64 byte Packets */
-+#define B44_RX_65_127	0x059CUL /* MIB RX 65 to 127 byte Packets */
-+#define B44_RX_128_255	0x05A0UL /* MIB RX 128 to 255 byte Packets */
-+#define B44_RX_256_511	0x05A4UL /* MIB RX 256 to 511 byte Packets */
-+#define B44_RX_512_1023	0x05A8UL /* MIB RX 512 to 1023 byte Packets */
-+#define B44_RX_1024_MAX	0x05ACUL /* MIB RX 1024 to max byte Packets */
-+#define B44_RX_JABBER	0x05B0UL /* MIB RX Jabber Packets */
-+#define B44_RX_OSIZE	0x05B4UL /* MIB RX Oversize Packets */
-+#define B44_RX_FRAG	0x05B8UL /* MIB RX Fragment Packets */
-+#define B44_RX_MISS	0x05BCUL /* MIB RX Missed Packets */
-+#define B44_RX_CRCA	0x05C0UL /* MIB RX CRC Align Errors */
-+#define B44_RX_USIZE	0x05C4UL /* MIB RX Undersize Packets */
-+#define B44_RX_CRC	0x05C8UL /* MIB RX CRC Errors */
-+#define B44_RX_ALIGN	0x05CCUL /* MIB RX Align Errors */
-+#define B44_RX_SYM	0x05D0UL /* MIB RX Symbol Errors */
-+#define B44_RX_PAUSE	0x05D4UL /* MIB RX Pause Packets */
-+#define B44_RX_NPAUSE	0x05D8UL /* MIB RX Non-Pause Packets */
-+
-+/* Silicon backplane register definitions */
-+#define B44_SBIMSTATE	0x0F90UL /* SB Initiator Agent State */
-+#define  SBIMSTATE_PC		0x0000000f /* Pipe Count */
-+#define  SBIMSTATE_AP_MASK	0x00000030 /* Arbitration Priority */
-+#define  SBIMSTATE_AP_BOTH	0x00000000 /* Use both timeslices and token */
-+#define  SBIMSTATE_AP_TS	0x00000010 /* Use timeslices only */
-+#define  SBIMSTATE_AP_TK	0x00000020 /* Use token only */
-+#define  SBIMSTATE_AP_RSV	0x00000030 /* Reserved */
-+#define  SBIMSTATE_IBE		0x00020000 /* In Band Error */
-+#define  SBIMSTATE_TO		0x00040000 /* Timeout */
-+#define B44_SBINTVEC	0x0F94UL /* SB Interrupt Mask */
-+#define  SBINTVEC_PCI		0x00000001 /* Enable interrupts for PCI */
-+#define  SBINTVEC_ENET0		0x00000002 /* Enable interrupts for enet 0 */
-+#define  SBINTVEC_ILINE20	0x00000004 /* Enable interrupts for iline20 */
-+#define  SBINTVEC_CODEC		0x00000008 /* Enable interrupts for v90 codec */
-+#define  SBINTVEC_USB		0x00000010 /* Enable interrupts for usb */
-+#define  SBINTVEC_EXTIF		0x00000020 /* Enable interrupts for external i/f */
-+#define  SBINTVEC_ENET1		0x00000040 /* Enable interrupts for enet 1 */
-+#define B44_SBTMSLOW	0x0F98UL /* SB Target State Low */
-+#define  SBTMSLOW_RESET		0x00000001 /* Reset */
-+#define  SBTMSLOW_REJECT	0x00000002 /* Reject */
-+#define  SBTMSLOW_CLOCK		0x00010000 /* Clock Enable */
-+#define  SBTMSLOW_FGC		0x00020000 /* Force Gated Clocks On */
-+#define  SBTMSLOW_PE		0x40000000 /* Power Management Enable */
-+#define  SBTMSLOW_BE		0x80000000 /* BIST Enable */
-+#define B44_SBTMSHIGH	0x0F9CUL /* SB Target State High */
-+#define  SBTMSHIGH_SERR		0x00000001 /* S-error */
-+#define  SBTMSHIGH_INT		0x00000002 /* Interrupt */
-+#define  SBTMSHIGH_BUSY		0x00000004 /* Busy */
-+#define  SBTMSHIGH_GCR		0x20000000 /* Gated Clock Request */
-+#define  SBTMSHIGH_BISTF	0x40000000 /* BIST Failed */
-+#define  SBTMSHIGH_BISTD	0x80000000 /* BIST Done */
-+#define B44_SBIDHIGH	0x0FFCUL /* SB Identification High */
-+#define  SBIDHIGH_RC_MASK	0x0000000f /* Revision Code */
-+#define  SBIDHIGH_CC_MASK	0x0000fff0 /* Core Code */
-+#define  SBIDHIGH_CC_SHIFT	4
-+#define  SBIDHIGH_VC_MASK	0xffff0000 /* Vendor Code */
-+#define  SBIDHIGH_VC_SHIFT	16
-+
-+/* SSB PCI config space registers.  */
-+#define	SSB_BAR0_WIN		0x80
-+#define	SSB_BAR1_WIN		0x84
-+#define	SSB_SPROM_CONTROL	0x88
-+#define	SSB_BAR1_CONTROL	0x8c
-+
-+/* SSB core and host control registers.  */
-+#define SSB_CONTROL		0x0000UL
-+#define SSB_ARBCONTROL		0x0010UL
-+#define SSB_ISTAT		0x0020UL
-+#define SSB_IMASK		0x0024UL
-+#define SSB_MBOX		0x0028UL
-+#define SSB_BCAST_ADDR		0x0050UL
-+#define SSB_BCAST_DATA		0x0054UL
-+#define SSB_PCI_TRANS_0		0x0100UL
-+#define SSB_PCI_TRANS_1		0x0104UL
-+#define SSB_PCI_TRANS_2		0x0108UL
-+#define SSB_SPROM		0x0800UL
-+
-+#define SSB_PCI_MEM		0x00000000
-+#define SSB_PCI_IO		0x00000001
-+#define SSB_PCI_CFG0		0x00000002
-+#define SSB_PCI_CFG1		0x00000003
-+#define SSB_PCI_PREF		0x00000004
-+#define SSB_PCI_BURST		0x00000008
-+#define SSB_PCI_MASK0		0xfc000000
-+#define SSB_PCI_MASK1		0xfc000000
-+#define SSB_PCI_MASK2		0xc0000000
-+
-+/* 4400 PHY registers */
-+#define B44_MII_AUXCTRL		24	/* Auxiliary Control */
-+#define  MII_AUXCTRL_DUPLEX	0x0001  /* Full Duplex */
-+#define  MII_AUXCTRL_SPEED	0x0002  /* 1=100Mbps, 0=10Mbps */
-+#define  MII_AUXCTRL_FORCED	0x0004	/* Forced 10/100 */
-+#define B44_MII_ALEDCTRL	26	/* Activity LED */
-+#define  MII_ALEDCTRL_ALLMSK	0x7fff
-+#define B44_MII_TLEDCTRL	27	/* Traffic Meter LED */
-+#define  MII_TLEDCTRL_ENABLE	0x0040
-+
-+struct dma_desc {
-+	u32	ctrl;
-+	u32	addr;
-+};
+ #
+ # These are still pretty much in the old state, watch, go blind.
+diff -Nur linux-2.6.12.5/arch/mips/pci/fixup-bcm47xx.c linux-2.6.12.5-brcm/arch/mips/pci/fixup-bcm47xx.c
+--- linux-2.6.12.5/arch/mips/pci/fixup-bcm47xx.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/pci/fixup-bcm47xx.c	2005-09-16 10:29:18.312570968 +0200
+@@ -0,0 +1,23 @@
++#include <linux/init.h>
++#include <linux/pci.h>
 +
-+/* There are only 12 bits in the DMA engine for descriptor offsetting
-+ * so the table must be aligned on a boundary of this.
-+ */
-+#define DMA_TABLE_BYTES		4096
++/* Do platform specific device initialization at pci_enable_device() time */
++int pcibios_plat_dev_init(struct pci_dev *dev)
++{
++	return 0;
++}
 +
-+#define DESC_CTRL_LEN	0x00001fff
-+#define DESC_CTRL_CMASK	0x0ff00000 /* Core specific bits */
-+#define DESC_CTRL_EOT	0x10000000 /* End of Table */
-+#define DESC_CTRL_IOC	0x20000000 /* Interrupt On Completion */
-+#define DESC_CTRL_EOF	0x40000000 /* End of Frame */
-+#define DESC_CTRL_SOF	0x80000000 /* Start of Frame */
++int __init pcibios_map_irq(struct pci_dev *dev, u8 slot, u8 pin)
++{
++	u8 irq;
++	
++	if (dev->bus->number == 1)
++		return 2;
 +
-+#define RX_COPY_THRESHOLD  	256
++	pci_read_config_byte(dev, PCI_INTERRUPT_LINE, &irq);
++	return irq + 2;
++}
 +
-+struct rx_header {
-+	u16	len;
-+	u16	flags;
-+	u16	pad[12];
-+};
-+#define RX_HEADER_LEN	28
-+
-+#define RX_FLAG_OFIFO	0x00000001 /* FIFO Overflow */
-+#define RX_FLAG_CRCERR	0x00000002 /* CRC Error */
-+#define RX_FLAG_SERR	0x00000004 /* Receive Symbol Error */
-+#define RX_FLAG_ODD	0x00000008 /* Frame has odd number of nibbles */
-+#define RX_FLAG_LARGE	0x00000010 /* Frame is > RX MAX Length */
-+#define RX_FLAG_MCAST	0x00000020 /* Dest is Multicast Address */
-+#define RX_FLAG_BCAST	0x00000040 /* Dest is Broadcast Address */
-+#define RX_FLAG_MISS	0x00000080 /* Received due to promisc mode */
-+#define RX_FLAG_LAST	0x00000800 /* Last buffer in frame */
-+#define RX_FLAG_ERRORS	(RX_FLAG_ODD | RX_FLAG_SERR | RX_FLAG_CRCERR | RX_FLAG_OFIFO)
-+
-+struct ring_info {
-+	struct sk_buff		*skb;
-+	DECLARE_PCI_UNMAP_ADDR(mapping);
++struct pci_fixup pcibios_fixups[] __initdata = {
++	{ 0 }
 +};
+diff -Nur linux-2.6.12.5/arch/mips/pci/ops-sb.c linux-2.6.12.5-brcm/arch/mips/pci/ops-sb.c
+--- linux-2.6.12.5/arch/mips/pci/ops-sb.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/pci/ops-sb.c	2005-09-16 10:29:18.312570968 +0200
+@@ -0,0 +1,44 @@
++#include <linux/kernel.h>
++#include <linux/init.h>
++#include <linux/pci.h>
++#include <linux/types.h>
++#include <asm/pci.h>
 +
-+#define B44_MCAST_TABLE_SIZE	32
++#include <typedefs.h>
++#include <sbpci.h>
 +
-+/* SW copy of device statistics, kept up to date by periodic timer
-+ * which probes HW values.  Must have same relative layout as HW
-+ * register above, because b44_stats_update depends upon this.
-+ */
-+struct b44_hw_stats {
-+	u32 tx_good_octets, tx_good_pkts, tx_octets;
-+	u32 tx_pkts, tx_broadcast_pkts, tx_multicast_pkts;
-+	u32 tx_len_64, tx_len_65_to_127, tx_len_128_to_255;
-+	u32 tx_len_256_to_511, tx_len_512_to_1023, tx_len_1024_to_max;
-+	u32 tx_jabber_pkts, tx_oversize_pkts, tx_fragment_pkts;
-+	u32 tx_underruns, tx_total_cols, tx_single_cols;
-+	u32 tx_multiple_cols, tx_excessive_cols, tx_late_cols;
-+	u32 tx_defered, tx_carrier_lost, tx_pause_pkts;
-+	u32 __pad1[8];
-+
-+	u32 rx_good_octets, rx_good_pkts, rx_octets;
-+	u32 rx_pkts, rx_broadcast_pkts, rx_multicast_pkts;
-+	u32 rx_len_64, rx_len_65_to_127, rx_len_128_to_255;
-+	u32 rx_len_256_to_511, rx_len_512_to_1023, rx_len_1024_to_max;
-+	u32 rx_jabber_pkts, rx_oversize_pkts, rx_fragment_pkts;
-+	u32 rx_missed_pkts, rx_crc_align_errs, rx_undersize;
-+	u32 rx_crc_errs, rx_align_errs, rx_symbol_errs;
-+	u32 rx_pause_pkts, rx_nonpause_pkts;
-+};
++extern void *sbh;
++//extern spinlock_t bcm47xx_sbh_lock;
++
++static int
++sb_pci_read_config(struct pci_bus *bus, unsigned int devfn,
++		     int reg, int size, u32 *val)
++{
++	//unsigned long flags;
++	int ret;
 +
-+struct b44 {
-+	spinlock_t		lock;
 +
-+	u32			imask, istat;
++	//spin_lock_irqsave(&sbh_lock, flags);
++	ret = sbpci_read_config(sbh, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), reg, val, size);
++	//spin_unlock_irqrestore(&sbh_lock, flags);
++
++	return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
++}
 +
-+	struct dma_desc		*rx_ring, *tx_ring;
++static int
++sb_pci_write_config(struct pci_bus *bus, unsigned int devfn,
++		      int reg, int size, u32 val)
++{
++//	unsigned long flags;
++	int ret;
 +
-+	u32			tx_prod, tx_cons;
-+	u32			rx_prod, rx_cons;
++//	spin_lock_irqsave(&sbh_lock, flags);
++	ret = sbpci_write_config(sbh, bus->number, PCI_SLOT(devfn), PCI_FUNC(devfn), reg, &val, size);
++//	spin_unlock_irqrestore(&sbh_lock, flags);
++	return ret ? PCIBIOS_DEVICE_NOT_FOUND : PCIBIOS_SUCCESSFUL;
++}
 +
-+	struct ring_info	*rx_buffers;
-+	struct ring_info	*tx_buffers;
++struct pci_ops sb_pci_ops = {
++	.read = sb_pci_read_config,
++	.write = sb_pci_write_config,
++};
+diff -Nur linux-2.6.12.5/arch/mips/pci/pci-bcm47xx.c linux-2.6.12.5-brcm/arch/mips/pci/pci-bcm47xx.c
+--- linux-2.6.12.5/arch/mips/pci/pci-bcm47xx.c	1970-01-01 01:00:00.000000000 +0100
++++ linux-2.6.12.5-brcm/arch/mips/pci/pci-bcm47xx.c	2005-09-16 10:29:18.313570816 +0200
+@@ -0,0 +1,61 @@
++#include <linux/init.h>
++#include <linux/pci.h>
++#include <linux/types.h>
 +
-+	u32			dma_offset;
-+	u32			flags;
-+#define B44_FLAG_INIT_COMPLETE	0x00000001
-+#define B44_FLAG_BUGGY_TXPTR	0x00000002
-+#define B44_FLAG_REORDER_BUG	0x00000004
-+#define B44_FLAG_PAUSE_AUTO	0x00008000
-+#define B44_FLAG_FULL_DUPLEX	0x00010000
-+#define B44_FLAG_100_BASE_T	0x00020000
-+#define B44_FLAG_TX_PAUSE	0x00040000
-+#define B44_FLAG_RX_PAUSE	0x00080000
-+#define B44_FLAG_FORCE_LINK	0x00100000
-+#define B44_FLAG_ADV_10HALF	0x01000000
-+#define B44_FLAG_ADV_10FULL	0x02000000
-+#define B44_FLAG_ADV_100HALF	0x04000000
-+#define B44_FLAG_ADV_100FULL	0x08000000
-+#define B44_FLAG_INTERNAL_PHY	0x10000000
++#include <asm/cpu.h>
++#include <asm/io.h>
 +
-+	u32			rx_offset;
++#include <typedefs.h>
++#include <sbconfig.h>
 +
-+	u32			msg_enable;
++extern struct pci_ops sb_pci_ops;
 +
-+	struct timer_list	timer;
++static struct resource sb_pci_mem_resource = {
++	.name   = "SB PCI Memory resources",
++	.start  = SB_ENUM_BASE,
++	.end    = SB_ENUM_LIM - 1,
++	.flags  = IORESOURCE_MEM,
++};
 +
-+	struct net_device_stats	stats;
-+	struct b44_hw_stats	hw_stats;
++static struct resource sb_pci_io_resource = {
++	.name   = "SB PCI I/O resources",
++	.start  = 0x100,
++	.end    = 0x1FF,
++	.flags  = IORESOURCE_IO,
++};
 +
-+	void __iomem		*regs;
-+	struct pci_dev		*pdev;
-+	struct net_device	*dev;
++static struct pci_controller bcm47xx_sb_pci_controller = {
++	.pci_ops        = &sb_pci_ops,
++	.mem_resource	= &sb_pci_mem_resource,
++	.io_resource	= &sb_pci_io_resource,
++};
 +
-+	dma_addr_t		rx_ring_dma, tx_ring_dma;
++static struct resource ext_pci_mem_resource = {
++	.name   = "Ext PCI Memory resources",
++	.start  = SB_PCI_DMA,
++//	.end    = 0x7FFFFFFF,
++	.end    = 0x40FFFFFF,
++	.flags  = IORESOURCE_MEM,
++};
 +
-+	u32			rx_pending;
-+	u32			tx_pending;
-+	u8			phy_addr;
-+	u8			core_unit;
++static struct resource ext_pci_io_resource = {
++	.name   = "Ext PCI I/O resources",
++	.start  = 0x200,
++	.end    = 0x2FF,
++	.flags  = IORESOURCE_IO,
++};
 +
-+	struct mii_if_info	mii_if;
++static struct pci_controller bcm47xx_ext_pci_controller = {
++	.pci_ops        = &sb_pci_ops,
++	.mem_resource	= &ext_pci_mem_resource,
++	.io_resource	= &ext_pci_io_resource,
 +};
 +
-+#endif /* _B44_H */
++static int __init bcm47xx_pci_init(void)
++{
++	register_pci_controller(&bcm47xx_sb_pci_controller);
++	register_pci_controller(&bcm47xx_ext_pci_controller);
++	return 0;
++}
++
++early_initcall(bcm47xx_pci_init);
+diff -Nur linux-2.6.12.5/arch/mips/pci/pci.c linux-2.6.12.5-brcm/arch/mips/pci/pci.c
+--- linux-2.6.12.5/arch/mips/pci/pci.c	2005-08-15 02:20:18.000000000 +0200
++++ linux-2.6.12.5-brcm/arch/mips/pci/pci.c	2005-09-16 10:29:18.327568688 +0200
+@@ -238,7 +238,8 @@
+ 		if (dev->resource[i].flags & IORESOURCE_IO)
+ 			offset = hose->io_offset;
+ 		else if (dev->resource[i].flags & IORESOURCE_MEM)
+-			offset = hose->mem_offset;
++			offset = 0x26000000;
++		//	offset = hose->mem_offset;
+ 
+ 		dev->resource[i].start += offset;
+ 		dev->resource[i].end += offset;
 diff -Nur linux-2.6.12.5/include/asm-mips/bootinfo.h linux-2.6.12.5-brcm/include/asm-mips/bootinfo.h
 --- linux-2.6.12.5/include/asm-mips/bootinfo.h	2005-08-15 02:20:18.000000000 +0200
-+++ linux-2.6.12.5-brcm/include/asm-mips/bootinfo.h	2005-08-28 11:12:20.695818872 +0200
++++ linux-2.6.12.5-brcm/include/asm-mips/bootinfo.h	2005-09-16 10:29:18.415555312 +0200
 @@ -213,6 +213,12 @@
  #define MACH_GROUP_TITAN       22	/* PMC-Sierra Titan		*/
  #define  MACH_TITAN_YOSEMITE	1	/* PMC-Sierra Yosemite		*/
@@ -18112,7 +13048,7 @@ diff -Nur linux-2.6.12.5/include/asm-mips/bootinfo.h linux-2.6.12.5-brcm/include
  const char *get_system_type(void);
 diff -Nur linux-2.6.12.5/include/asm-mips/cpu.h linux-2.6.12.5-brcm/include/asm-mips/cpu.h
 --- linux-2.6.12.5/include/asm-mips/cpu.h	2005-08-15 02:20:18.000000000 +0200
-+++ linux-2.6.12.5-brcm/include/asm-mips/cpu.h	2005-08-28 11:12:20.695818872 +0200
++++ linux-2.6.12.5-brcm/include/asm-mips/cpu.h	2005-09-16 10:29:18.416555160 +0200
 @@ -87,6 +87,13 @@
  #define PRID_IMP_SR71000        0x0400
  
@@ -18140,7 +13076,7 @@ diff -Nur linux-2.6.12.5/include/asm-mips/cpu.h linux-2.6.12.5-brcm/include/asm-
   * ISA Level encodings
 diff -Nur linux-2.6.12.5/include/asm-mips/mipsregs.h linux-2.6.12.5-brcm/include/asm-mips/mipsregs.h
 --- linux-2.6.12.5/include/asm-mips/mipsregs.h	2005-08-15 02:20:18.000000000 +0200
-+++ linux-2.6.12.5-brcm/include/asm-mips/mipsregs.h	2005-08-28 11:12:20.722814768 +0200
++++ linux-2.6.12.5-brcm/include/asm-mips/mipsregs.h	2005-09-16 10:29:18.426553640 +0200
 @@ -790,10 +790,18 @@
  #define read_c0_config1()	__read_32bit_c0_register($16, 1)
  #define read_c0_config2()	__read_32bit_c0_register($16, 2)
@@ -18162,7 +13098,7 @@ diff -Nur linux-2.6.12.5/include/asm-mips/mipsregs.h linux-2.6.12.5-brcm/include
   * The WatchLo register.  There may be upto 8 of them.
 diff -Nur linux-2.6.12.5/include/linux/init.h linux-2.6.12.5-brcm/include/linux/init.h
 --- linux-2.6.12.5/include/linux/init.h	2005-08-15 02:20:18.000000000 +0200
-+++ linux-2.6.12.5-brcm/include/linux/init.h	2005-08-28 11:12:20.723814616 +0200
++++ linux-2.6.12.5-brcm/include/linux/init.h	2005-09-16 10:29:18.426553640 +0200
 @@ -86,6 +86,8 @@
  	static initcall_t __initcall_##fn __attribute_used__ \
  	__attribute__((__section__(".initcall" level ".init"))) = fn
@@ -18174,7 +13110,7 @@ diff -Nur linux-2.6.12.5/include/linux/init.h linux-2.6.12.5-brcm/include/linux/
  #define arch_initcall(fn)		__define_initcall("3",fn)
 diff -Nur linux-2.6.12.5/include/linux/pci_ids.h linux-2.6.12.5-brcm/include/linux/pci_ids.h
 --- linux-2.6.12.5/include/linux/pci_ids.h	2005-08-15 02:20:18.000000000 +0200
-+++ linux-2.6.12.5-brcm/include/linux/pci_ids.h	2005-08-28 11:12:20.726814160 +0200
++++ linux-2.6.12.5-brcm/include/linux/pci_ids.h	2005-09-16 10:29:18.429553184 +0200
 @@ -2110,6 +2110,7 @@
  #define PCI_DEVICE_ID_TIGON3_5901_2	0x170e
  #define PCI_DEVICE_ID_BCM4401		0x4401
@@ -18183,2616 +13119,3 @@ diff -Nur linux-2.6.12.5/include/linux/pci_ids.h linux-2.6.12.5-brcm/include/lin
  
  #define PCI_VENDOR_ID_TOPIC		0x151f
  #define PCI_DEVICE_ID_TOPIC_TP560	0x0000
-diff -Nur linux-2.6.12.5/include/linux/pci_ids.h.orig linux-2.6.12.5-brcm/include/linux/pci_ids.h.orig
---- linux-2.6.12.5/include/linux/pci_ids.h.orig	1970-01-01 01:00:00.000000000 +0100
-+++ linux-2.6.12.5-brcm/include/linux/pci_ids.h.orig	2005-08-15 02:20:18.000000000 +0200
-@@ -0,0 +1,2609 @@
-+/*
-+ *	PCI Class, Vendor and Device IDs
-+ *
-+ *	Please keep sorted.
-+ */
-+
-+/* Device classes and subclasses */
-+
-+#define PCI_CLASS_NOT_DEFINED		0x0000
-+#define PCI_CLASS_NOT_DEFINED_VGA	0x0001
-+
-+#define PCI_BASE_CLASS_STORAGE		0x01
-+#define PCI_CLASS_STORAGE_SCSI		0x0100
-+#define PCI_CLASS_STORAGE_IDE		0x0101
-+#define PCI_CLASS_STORAGE_FLOPPY	0x0102
-+#define PCI_CLASS_STORAGE_IPI		0x0103
-+#define PCI_CLASS_STORAGE_RAID		0x0104
-+#define PCI_CLASS_STORAGE_OTHER		0x0180
-+
-+#define PCI_BASE_CLASS_NETWORK		0x02
-+#define PCI_CLASS_NETWORK_ETHERNET	0x0200
-+#define PCI_CLASS_NETWORK_TOKEN_RING	0x0201
-+#define PCI_CLASS_NETWORK_FDDI		0x0202
-+#define PCI_CLASS_NETWORK_ATM		0x0203
-+#define PCI_CLASS_NETWORK_OTHER		0x0280
-+
-+#define PCI_BASE_CLASS_DISPLAY		0x03
-+#define PCI_CLASS_DISPLAY_VGA		0x0300
-+#define PCI_CLASS_DISPLAY_XGA		0x0301
-+#define PCI_CLASS_DISPLAY_3D		0x0302
-+#define PCI_CLASS_DISPLAY_OTHER		0x0380
-+
-+#define PCI_BASE_CLASS_MULTIMEDIA	0x04
-+#define PCI_CLASS_MULTIMEDIA_VIDEO	0x0400
-+#define PCI_CLASS_MULTIMEDIA_AUDIO	0x0401
-+#define PCI_CLASS_MULTIMEDIA_PHONE	0x0402
-+#define PCI_CLASS_MULTIMEDIA_OTHER	0x0480
-+
-+#define PCI_BASE_CLASS_MEMORY		0x05
-+#define PCI_CLASS_MEMORY_RAM		0x0500
-+#define PCI_CLASS_MEMORY_FLASH		0x0501
-+#define PCI_CLASS_MEMORY_OTHER		0x0580
-+
-+#define PCI_BASE_CLASS_BRIDGE		0x06
-+#define PCI_CLASS_BRIDGE_HOST		0x0600
-+#define PCI_CLASS_BRIDGE_ISA		0x0601
-+#define PCI_CLASS_BRIDGE_EISA		0x0602
-+#define PCI_CLASS_BRIDGE_MC		0x0603
-+#define PCI_CLASS_BRIDGE_PCI		0x0604
-+#define PCI_CLASS_BRIDGE_PCMCIA		0x0605
-+#define PCI_CLASS_BRIDGE_NUBUS		0x0606
-+#define PCI_CLASS_BRIDGE_CARDBUS	0x0607
-+#define PCI_CLASS_BRIDGE_RACEWAY	0x0608
-+#define PCI_CLASS_BRIDGE_OTHER		0x0680
-+
-+#define PCI_BASE_CLASS_COMMUNICATION	0x07
-+#define PCI_CLASS_COMMUNICATION_SERIAL	0x0700
-+#define PCI_CLASS_COMMUNICATION_PARALLEL 0x0701
-+#define PCI_CLASS_COMMUNICATION_MULTISERIAL 0x0702
-+#define PCI_CLASS_COMMUNICATION_MODEM	0x0703
-+#define PCI_CLASS_COMMUNICATION_OTHER	0x0780
-+
-+#define PCI_BASE_CLASS_SYSTEM		0x08
-+#define PCI_CLASS_SYSTEM_PIC		0x0800
-+#define PCI_CLASS_SYSTEM_DMA		0x0801
-+#define PCI_CLASS_SYSTEM_TIMER		0x0802
-+#define PCI_CLASS_SYSTEM_RTC		0x0803
-+#define PCI_CLASS_SYSTEM_PCI_HOTPLUG	0x0804
-+#define PCI_CLASS_SYSTEM_OTHER		0x0880
-+
-+#define PCI_BASE_CLASS_INPUT		0x09
-+#define PCI_CLASS_INPUT_KEYBOARD	0x0900
-+#define PCI_CLASS_INPUT_PEN		0x0901
-+#define PCI_CLASS_INPUT_MOUSE		0x0902
-+#define PCI_CLASS_INPUT_SCANNER		0x0903
-+#define PCI_CLASS_INPUT_GAMEPORT	0x0904
-+#define PCI_CLASS_INPUT_OTHER		0x0980
-+
-+#define PCI_BASE_CLASS_DOCKING		0x0a
-+#define PCI_CLASS_DOCKING_GENERIC	0x0a00
-+#define PCI_CLASS_DOCKING_OTHER		0x0a80
-+
-+#define PCI_BASE_CLASS_PROCESSOR	0x0b
-+#define PCI_CLASS_PROCESSOR_386		0x0b00
-+#define PCI_CLASS_PROCESSOR_486		0x0b01
-+#define PCI_CLASS_PROCESSOR_PENTIUM	0x0b02
-+#define PCI_CLASS_PROCESSOR_ALPHA	0x0b10
-+#define PCI_CLASS_PROCESSOR_POWERPC	0x0b20
-+#define PCI_CLASS_PROCESSOR_MIPS	0x0b30
-+#define PCI_CLASS_PROCESSOR_CO		0x0b40
-+
-+#define PCI_BASE_CLASS_SERIAL		0x0c
-+#define PCI_CLASS_SERIAL_FIREWIRE	0x0c00
-+#define PCI_CLASS_SERIAL_ACCESS		0x0c01
-+#define PCI_CLASS_SERIAL_SSA		0x0c02
-+#define PCI_CLASS_SERIAL_USB		0x0c03
-+#define PCI_CLASS_SERIAL_FIBER		0x0c04
-+#define PCI_CLASS_SERIAL_SMBUS		0x0c05
-+
-+#define PCI_BASE_CLASS_INTELLIGENT	0x0e
-+#define PCI_CLASS_INTELLIGENT_I2O	0x0e00
-+
-+#define PCI_BASE_CLASS_SATELLITE	0x0f
-+#define PCI_CLASS_SATELLITE_TV		0x0f00
-+#define PCI_CLASS_SATELLITE_AUDIO	0x0f01
-+#define PCI_CLASS_SATELLITE_VOICE	0x0f03
-+#define PCI_CLASS_SATELLITE_DATA	0x0f04
-+
-+#define PCI_BASE_CLASS_CRYPT		0x10
-+#define PCI_CLASS_CRYPT_NETWORK		0x1000
-+#define PCI_CLASS_CRYPT_ENTERTAINMENT	0x1001
-+#define PCI_CLASS_CRYPT_OTHER		0x1080
-+
-+#define PCI_BASE_CLASS_SIGNAL_PROCESSING 0x11
-+#define PCI_CLASS_SP_DPIO		0x1100
-+#define PCI_CLASS_SP_OTHER		0x1180
-+
-+#define PCI_CLASS_OTHERS		0xff
-+
-+/* Vendors and devices.  Sort key: vendor first, device next. */
-+
-+#define PCI_VENDOR_ID_DYNALINK		0x0675
-+#define PCI_DEVICE_ID_DYNALINK_IS64PH	0x1702
-+
-+#define PCI_VENDOR_ID_BERKOM			0x0871
-+#define PCI_DEVICE_ID_BERKOM_A1T		0xffa1
-+#define PCI_DEVICE_ID_BERKOM_T_CONCEPT		0xffa2
-+#define PCI_DEVICE_ID_BERKOM_A4T		0xffa4
-+#define PCI_DEVICE_ID_BERKOM_SCITEL_QUADRO	0xffa8
-+
-+#define PCI_VENDOR_ID_COMPAQ		0x0e11
-+#define PCI_DEVICE_ID_COMPAQ_TOKENRING	0x0508
-+#define PCI_DEVICE_ID_COMPAQ_1280	0x3033
-+#define PCI_DEVICE_ID_COMPAQ_TRIFLEX	0x4000
-+#define PCI_DEVICE_ID_COMPAQ_6010	0x6010
-+#define PCI_DEVICE_ID_COMPAQ_TACHYON	0xa0fc
-+#define PCI_DEVICE_ID_COMPAQ_SMART2P	0xae10
-+#define PCI_DEVICE_ID_COMPAQ_NETEL100	0xae32
-+#define PCI_DEVICE_ID_COMPAQ_NETEL10	0xae34
-+#define PCI_DEVICE_ID_COMPAQ_TRIFLEX_IDE 0xae33
-+#define PCI_DEVICE_ID_COMPAQ_NETFLEX3I	0xae35
-+#define PCI_DEVICE_ID_COMPAQ_NETEL100D	0xae40
-+#define PCI_DEVICE_ID_COMPAQ_NETEL100PI	0xae43
-+#define PCI_DEVICE_ID_COMPAQ_NETEL100I	0xb011
-+#define PCI_DEVICE_ID_COMPAQ_CISS	0xb060
-+#define PCI_DEVICE_ID_COMPAQ_CISSB	0xb178
-+#define PCI_DEVICE_ID_COMPAQ_CISSC	0x46
-+#define PCI_DEVICE_ID_COMPAQ_THUNDER	0xf130
-+#define PCI_DEVICE_ID_COMPAQ_NETFLEX3B	0xf150
-+
-+#define PCI_VENDOR_ID_NCR		0x1000
-+#define PCI_VENDOR_ID_LSI_LOGIC		0x1000
-+#define PCI_DEVICE_ID_NCR_53C810	0x0001
-+#define PCI_DEVICE_ID_NCR_53C820	0x0002
-+#define PCI_DEVICE_ID_NCR_53C825	0x0003
-+#define PCI_DEVICE_ID_NCR_53C815	0x0004
-+#define PCI_DEVICE_ID_LSI_53C810AP	0x0005
-+#define PCI_DEVICE_ID_NCR_53C860	0x0006
-+#define PCI_DEVICE_ID_LSI_53C1510	0x000a
-+#define PCI_DEVICE_ID_NCR_53C896	0x000b
-+#define PCI_DEVICE_ID_NCR_53C895	0x000c
-+#define PCI_DEVICE_ID_NCR_53C885	0x000d
-+#define PCI_DEVICE_ID_NCR_53C875	0x000f
-+#define PCI_DEVICE_ID_NCR_53C1510	0x0010
-+#define PCI_DEVICE_ID_LSI_53C895A	0x0012
-+#define PCI_DEVICE_ID_LSI_53C875A	0x0013
-+#define PCI_DEVICE_ID_LSI_53C1010_33	0x0020
-+#define PCI_DEVICE_ID_LSI_53C1010_66	0x0021
-+#define PCI_DEVICE_ID_LSI_53C1030	0x0030
-+#define PCI_DEVICE_ID_LSI_1030_53C1035	0x0032
-+#define PCI_DEVICE_ID_LSI_53C1035	0x0040
-+#define PCI_DEVICE_ID_NCR_53C875J	0x008f
-+#define PCI_DEVICE_ID_LSI_FC909		0x0621
-+#define PCI_DEVICE_ID_LSI_FC929		0x0622
-+#define PCI_DEVICE_ID_LSI_FC929_LAN	0x0623
-+#define PCI_DEVICE_ID_LSI_FC919		0x0624
-+#define PCI_DEVICE_ID_LSI_FC919_LAN	0x0625
-+#define PCI_DEVICE_ID_LSI_FC929X	0x0626
-+#define PCI_DEVICE_ID_LSI_FC939X	0x0642
-+#define PCI_DEVICE_ID_LSI_FC949X	0x0640
-+#define PCI_DEVICE_ID_LSI_FC919X	0x0628
-+#define PCI_DEVICE_ID_NCR_YELLOWFIN	0x0701
-+#define PCI_DEVICE_ID_LSI_61C102	0x0901
-+#define PCI_DEVICE_ID_LSI_63C815	0x1000
-+#define PCI_DEVICE_ID_LSI_SAS1064	0x0050
-+#define PCI_DEVICE_ID_LSI_SAS1066	0x005E
-+#define PCI_DEVICE_ID_LSI_SAS1068	0x0054
-+#define PCI_DEVICE_ID_LSI_SAS1064A	0x005C
-+#define PCI_DEVICE_ID_LSI_SAS1064E	0x0056
-+#define PCI_DEVICE_ID_LSI_SAS1066E	0x005A
-+#define PCI_DEVICE_ID_LSI_SAS1068E	0x0058
-+#define PCI_DEVICE_ID_LSI_SAS1078	0x0060
-+
-+#define PCI_VENDOR_ID_ATI		0x1002
-+/* Mach64 */
-+#define PCI_DEVICE_ID_ATI_68800		0x4158
-+#define PCI_DEVICE_ID_ATI_215CT222	0x4354
-+#define PCI_DEVICE_ID_ATI_210888CX	0x4358
-+#define PCI_DEVICE_ID_ATI_215ET222	0x4554
-+/* Mach64 / Rage */
-+#define PCI_DEVICE_ID_ATI_215GB		0x4742
-+#define PCI_DEVICE_ID_ATI_215GD		0x4744
-+#define PCI_DEVICE_ID_ATI_215GI		0x4749
-+#define PCI_DEVICE_ID_ATI_215GP		0x4750
-+#define PCI_DEVICE_ID_ATI_215GQ		0x4751
-+#define PCI_DEVICE_ID_ATI_215XL		0x4752
-+#define PCI_DEVICE_ID_ATI_215GT		0x4754
-+#define PCI_DEVICE_ID_ATI_215GTB	0x4755
-+#define PCI_DEVICE_ID_ATI_215_IV	0x4756
-+#define PCI_DEVICE_ID_ATI_215_IW	0x4757
-+#define PCI_DEVICE_ID_ATI_215_IZ	0x475A
-+#define PCI_DEVICE_ID_ATI_210888GX	0x4758
-+#define PCI_DEVICE_ID_ATI_215_LB	0x4c42
-+#define PCI_DEVICE_ID_ATI_215_LD	0x4c44
-+#define PCI_DEVICE_ID_ATI_215_LG	0x4c47
-+#define PCI_DEVICE_ID_ATI_215_LI	0x4c49
-+#define PCI_DEVICE_ID_ATI_215_LM	0x4c4D
-+#define PCI_DEVICE_ID_ATI_215_LN	0x4c4E
-+#define PCI_DEVICE_ID_ATI_215_LR	0x4c52
-+#define PCI_DEVICE_ID_ATI_215_LS	0x4c53
-+#define PCI_DEVICE_ID_ATI_264_LT	0x4c54
-+/* Mach64 VT */
-+#define PCI_DEVICE_ID_ATI_264VT		0x5654
-+#define PCI_DEVICE_ID_ATI_264VU		0x5655
-+#define PCI_DEVICE_ID_ATI_264VV		0x5656
-+/* Rage128 GL */
-+#define PCI_DEVICE_ID_ATI_RAGE128_RE	0x5245
-+#define PCI_DEVICE_ID_ATI_RAGE128_RF	0x5246
-+#define PCI_DEVICE_ID_ATI_RAGE128_RG	0x5247
-+/* Rage128 VR */
-+#define PCI_DEVICE_ID_ATI_RAGE128_RK	0x524b
-+#define PCI_DEVICE_ID_ATI_RAGE128_RL	0x524c
-+#define PCI_DEVICE_ID_ATI_RAGE128_SE	0x5345
-+#define PCI_DEVICE_ID_ATI_RAGE128_SF	0x5346
-+#define PCI_DEVICE_ID_ATI_RAGE128_SG	0x5347
-+#define PCI_DEVICE_ID_ATI_RAGE128_SH	0x5348
-+#define PCI_DEVICE_ID_ATI_RAGE128_SK	0x534b
-+#define PCI_DEVICE_ID_ATI_RAGE128_SL	0x534c
-+#define PCI_DEVICE_ID_ATI_RAGE128_SM	0x534d
-+#define PCI_DEVICE_ID_ATI_RAGE128_SN	0x534e
-+/* Rage128 Ultra */
-+#define PCI_DEVICE_ID_ATI_RAGE128_TF	0x5446
-+#define PCI_DEVICE_ID_ATI_RAGE128_TL	0x544c
-+#define PCI_DEVICE_ID_ATI_RAGE128_TR	0x5452
-+#define PCI_DEVICE_ID_ATI_RAGE128_TS	0x5453
-+#define PCI_DEVICE_ID_ATI_RAGE128_TT	0x5454
-+#define PCI_DEVICE_ID_ATI_RAGE128_TU	0x5455
-+/* Rage128 M3 */
-+#define PCI_DEVICE_ID_ATI_RAGE128_LE	0x4c45
-+#define PCI_DEVICE_ID_ATI_RAGE128_LF	0x4c46
-+/* Rage128 M4 */
-+#define PCI_DEVICE_ID_ATI_RAGE128_MF    0x4d46
-+#define PCI_DEVICE_ID_ATI_RAGE128_ML    0x4d4c
-+/* Rage128 Pro GL */
-+#define PCI_DEVICE_ID_ATI_RAGE128_PA	0x5041
-+#define PCI_DEVICE_ID_ATI_RAGE128_PB	0x5042
-+#define PCI_DEVICE_ID_ATI_RAGE128_PC	0x5043
-+#define PCI_DEVICE_ID_ATI_RAGE128_PD	0x5044
-+#define PCI_DEVICE_ID_ATI_RAGE128_PE	0x5045
-+#define PCI_DEVICE_ID_ATI_RAGE128_PF	0x5046
-+/* Rage128 Pro VR */
-+#define PCI_DEVICE_ID_ATI_RAGE128_PG	0x5047
-+#define PCI_DEVICE_ID_ATI_RAGE128_PH	0x5048
-+#define PCI_DEVICE_ID_ATI_RAGE128_PI	0x5049
-+#define PCI_DEVICE_ID_ATI_RAGE128_PJ	0x504A
-+#define PCI_DEVICE_ID_ATI_RAGE128_PK	0x504B
-+#define PCI_DEVICE_ID_ATI_RAGE128_PL	0x504C
-+#define PCI_DEVICE_ID_ATI_RAGE128_PM	0x504D
-+#define PCI_DEVICE_ID_ATI_RAGE128_PN	0x504E
-+#define PCI_DEVICE_ID_ATI_RAGE128_PO	0x504F
-+#define PCI_DEVICE_ID_ATI_RAGE128_PP	0x5050
-+#define PCI_DEVICE_ID_ATI_RAGE128_PQ	0x5051
-+#define PCI_DEVICE_ID_ATI_RAGE128_PR	0x5052
-+#define PCI_DEVICE_ID_ATI_RAGE128_TR	0x5452
-+#define PCI_DEVICE_ID_ATI_RAGE128_PS	0x5053
-+#define PCI_DEVICE_ID_ATI_RAGE128_PT	0x5054
-+#define PCI_DEVICE_ID_ATI_RAGE128_PU	0x5055
-+#define PCI_DEVICE_ID_ATI_RAGE128_PV	0x5056
-+#define PCI_DEVICE_ID_ATI_RAGE128_PW	0x5057
-+#define PCI_DEVICE_ID_ATI_RAGE128_PX	0x5058
-+/* Rage128 M4 */
-+#define PCI_DEVICE_ID_ATI_RADEON_LE	0x4d45
-+#define PCI_DEVICE_ID_ATI_RADEON_LF	0x4d46
-+/* Radeon R100 */
-+#define PCI_DEVICE_ID_ATI_RADEON_QD	0x5144
-+#define PCI_DEVICE_ID_ATI_RADEON_QE	0x5145
-+#define PCI_DEVICE_ID_ATI_RADEON_QF	0x5146
-+#define PCI_DEVICE_ID_ATI_RADEON_QG	0x5147
-+/* Radeon RV100 (VE) */
-+#define PCI_DEVICE_ID_ATI_RADEON_QY	0x5159
-+#define PCI_DEVICE_ID_ATI_RADEON_QZ	0x515a
-+/* Radeon R200 (8500) */
-+#define PCI_DEVICE_ID_ATI_RADEON_QL	0x514c
-+#define PCI_DEVICE_ID_ATI_RADEON_QN	0x514e
-+#define PCI_DEVICE_ID_ATI_RADEON_QO	0x514f
-+#define PCI_DEVICE_ID_ATI_RADEON_Ql	0x516c
-+#define PCI_DEVICE_ID_ATI_RADEON_BB	0x4242
-+/* Radeon R200 (9100) */
-+#define PCI_DEVICE_ID_ATI_RADEON_QM	0x514d
-+/* Radeon RV200 (7500) */
-+#define PCI_DEVICE_ID_ATI_RADEON_QW	0x5157
-+#define PCI_DEVICE_ID_ATI_RADEON_QX	0x5158
-+/* Radeon NV-100 */
-+#define PCI_DEVICE_ID_ATI_RADEON_N1	0x5159
-+#define PCI_DEVICE_ID_ATI_RADEON_N2	0x515a
-+/* Radeon RV250 (9000) */
-+#define PCI_DEVICE_ID_ATI_RADEON_Id	0x4964
-+#define PCI_DEVICE_ID_ATI_RADEON_Ie	0x4965
-+#define PCI_DEVICE_ID_ATI_RADEON_If	0x4966
-+#define PCI_DEVICE_ID_ATI_RADEON_Ig	0x4967
-+/* Radeon RV280 (9200) */
-+#define PCI_DEVICE_ID_ATI_RADEON_Y_	0x5960
-+#define PCI_DEVICE_ID_ATI_RADEON_Ya	0x5961
-+#define PCI_DEVICE_ID_ATI_RADEON_Yd	0x5964
-+/* Radeon R300 (9500) */
-+#define PCI_DEVICE_ID_ATI_RADEON_AD	0x4144
-+/* Radeon R300 (9700) */
-+#define PCI_DEVICE_ID_ATI_RADEON_ND	0x4e44
-+#define PCI_DEVICE_ID_ATI_RADEON_NE	0x4e45
-+#define PCI_DEVICE_ID_ATI_RADEON_NF	0x4e46
-+#define PCI_DEVICE_ID_ATI_RADEON_NG	0x4e47
-+#define PCI_DEVICE_ID_ATI_RADEON_AE	0x4145
-+#define PCI_DEVICE_ID_ATI_RADEON_AF	0x4146
-+/* Radeon R350 (9800) */
-+#define PCI_DEVICE_ID_ATI_RADEON_NH	0x4e48
-+#define PCI_DEVICE_ID_ATI_RADEON_NI	0x4e49
-+/* Radeon RV350 (9600) */
-+#define PCI_DEVICE_ID_ATI_RADEON_AP	0x4150
-+#define PCI_DEVICE_ID_ATI_RADEON_AR	0x4152
-+/* Radeon M6 */
-+#define PCI_DEVICE_ID_ATI_RADEON_LY	0x4c59
-+#define PCI_DEVICE_ID_ATI_RADEON_LZ	0x4c5a
-+/* Radeon M7 */
-+#define PCI_DEVICE_ID_ATI_RADEON_LW	0x4c57
-+#define PCI_DEVICE_ID_ATI_RADEON_LX	0x4c58
-+/* Radeon M9 */
-+#define PCI_DEVICE_ID_ATI_RADEON_Ld	0x4c64
-+#define PCI_DEVICE_ID_ATI_RADEON_Le	0x4c65
-+#define PCI_DEVICE_ID_ATI_RADEON_Lf	0x4c66
-+#define PCI_DEVICE_ID_ATI_RADEON_Lg	0x4c67
-+/* Radeon */
-+#define PCI_DEVICE_ID_ATI_RADEON_RA	0x5144
-+#define PCI_DEVICE_ID_ATI_RADEON_RB	0x5145
-+#define PCI_DEVICE_ID_ATI_RADEON_RC	0x5146
-+#define PCI_DEVICE_ID_ATI_RADEON_RD	0x5147
-+/* RadeonIGP */
-+#define PCI_DEVICE_ID_ATI_RS100		0xcab0
-+#define PCI_DEVICE_ID_ATI_RS200		0xcab2
-+#define PCI_DEVICE_ID_ATI_RS200_B	0xcbb2
-+#define PCI_DEVICE_ID_ATI_RS250		0xcab3
-+#define PCI_DEVICE_ID_ATI_RS300_100	0x5830
-+#define PCI_DEVICE_ID_ATI_RS300_133	0x5831
-+#define PCI_DEVICE_ID_ATI_RS300_166	0x5832
-+#define PCI_DEVICE_ID_ATI_RS300_200	0x5833
-+#define PCI_DEVICE_ID_ATI_RS350_100     0x7830
-+#define PCI_DEVICE_ID_ATI_RS350_133     0x7831
-+#define PCI_DEVICE_ID_ATI_RS350_166     0x7832
-+#define PCI_DEVICE_ID_ATI_RS350_200     0x7833
-+#define PCI_DEVICE_ID_ATI_RS400_100     0x5a30
-+#define PCI_DEVICE_ID_ATI_RS400_133     0x5a31
-+#define PCI_DEVICE_ID_ATI_RS400_166     0x5a32
-+#define PCI_DEVICE_ID_ATI_RS400_200     0x5a33
-+#define PCI_DEVICE_ID_ATI_RS480         0x5950
-+/* ATI IXP Chipset */
-+#define PCI_DEVICE_ID_ATI_IXP200_IDE	0x4349
-+#define PCI_DEVICE_ID_ATI_IXP300_IDE	0x4369
-+#define PCI_DEVICE_ID_ATI_IXP300_SATA   0x436e
-+#define PCI_DEVICE_ID_ATI_IXP400_IDE	0x4376
-+#define PCI_DEVICE_ID_ATI_IXP400_SATA   0x4379
-+
-+#define PCI_VENDOR_ID_VLSI		0x1004
-+#define PCI_DEVICE_ID_VLSI_82C592	0x0005
-+#define PCI_DEVICE_ID_VLSI_82C593	0x0006
-+#define PCI_DEVICE_ID_VLSI_82C594	0x0007
-+#define PCI_DEVICE_ID_VLSI_82C597	0x0009
-+#define PCI_DEVICE_ID_VLSI_82C541	0x000c
-+#define PCI_DEVICE_ID_VLSI_82C543	0x000d
-+#define PCI_DEVICE_ID_VLSI_82C532	0x0101
-+#define PCI_DEVICE_ID_VLSI_82C534	0x0102
-+#define PCI_DEVICE_ID_VLSI_82C535	0x0104
-+#define PCI_DEVICE_ID_VLSI_82C147	0x0105
-+#define PCI_DEVICE_ID_VLSI_VAS96011	0x0702
-+
-+#define PCI_VENDOR_ID_ADL		0x1005
-+#define PCI_DEVICE_ID_ADL_2301		0x2301
-+
-+#define PCI_VENDOR_ID_NS		0x100b
-+#define PCI_DEVICE_ID_NS_87415		0x0002
-+#define PCI_DEVICE_ID_NS_87560_LIO	0x000e
-+#define PCI_DEVICE_ID_NS_87560_USB	0x0012
-+#define PCI_DEVICE_ID_NS_83815		0x0020
-+#define PCI_DEVICE_ID_NS_83820		0x0022
-+#define PCI_DEVICE_ID_NS_SCx200_BRIDGE	0x0500
-+#define PCI_DEVICE_ID_NS_SCx200_SMI	0x0501
-+#define PCI_DEVICE_ID_NS_SCx200_IDE	0x0502
-+#define PCI_DEVICE_ID_NS_SCx200_AUDIO	0x0503
-+#define PCI_DEVICE_ID_NS_SCx200_VIDEO	0x0504
-+#define PCI_DEVICE_ID_NS_SCx200_XBUS	0x0505
-+#define PCI_DEVICE_ID_NS_SC1100_BRIDGE	0x0510
-+#define PCI_DEVICE_ID_NS_SC1100_SMI	0x0511
-+#define PCI_DEVICE_ID_NS_SC1100_XBUS	0x0515
-+#define PCI_DEVICE_ID_NS_87410		0xd001
-+
-+#define PCI_VENDOR_ID_TSENG		0x100c
-+#define PCI_DEVICE_ID_TSENG_W32P_2	0x3202
-+#define PCI_DEVICE_ID_TSENG_W32P_b	0x3205
-+#define PCI_DEVICE_ID_TSENG_W32P_c	0x3206
-+#define PCI_DEVICE_ID_TSENG_W32P_d	0x3207
-+#define PCI_DEVICE_ID_TSENG_ET6000	0x3208
-+
-+#define PCI_VENDOR_ID_WEITEK		0x100e
-+#define PCI_DEVICE_ID_WEITEK_P9000	0x9001
-+#define PCI_DEVICE_ID_WEITEK_P9100	0x9100
-+
-+#define PCI_VENDOR_ID_DEC		0x1011
-+#define PCI_DEVICE_ID_DEC_BRD		0x0001
-+#define PCI_DEVICE_ID_DEC_TULIP		0x0002
-+#define PCI_DEVICE_ID_DEC_TGA		0x0004
-+#define PCI_DEVICE_ID_DEC_TULIP_FAST	0x0009
-+#define PCI_DEVICE_ID_DEC_TGA2		0x000D
-+#define PCI_DEVICE_ID_DEC_FDDI		0x000F
-+#define PCI_DEVICE_ID_DEC_TULIP_PLUS	0x0014
-+#define PCI_DEVICE_ID_DEC_21142		0x0019
-+#define PCI_DEVICE_ID_DEC_21052		0x0021
-+#define PCI_DEVICE_ID_DEC_21150		0x0022
-+#define PCI_DEVICE_ID_DEC_21152		0x0024
-+#define PCI_DEVICE_ID_DEC_21153		0x0025
-+#define PCI_DEVICE_ID_DEC_21154		0x0026
-+#define PCI_DEVICE_ID_DEC_21285		0x1065
-+#define PCI_DEVICE_ID_COMPAQ_42XX	0x0046
-+
-+#define PCI_VENDOR_ID_CIRRUS		0x1013
-+#define PCI_DEVICE_ID_CIRRUS_7548	0x0038
-+#define PCI_DEVICE_ID_CIRRUS_5430	0x00a0
-+#define PCI_DEVICE_ID_CIRRUS_5434_4	0x00a4
-+#define PCI_DEVICE_ID_CIRRUS_5434_8	0x00a8
-+#define PCI_DEVICE_ID_CIRRUS_5436	0x00ac
-+#define PCI_DEVICE_ID_CIRRUS_5446	0x00b8
-+#define PCI_DEVICE_ID_CIRRUS_5480	0x00bc
-+#define PCI_DEVICE_ID_CIRRUS_5462	0x00d0
-+#define PCI_DEVICE_ID_CIRRUS_5464	0x00d4
-+#define PCI_DEVICE_ID_CIRRUS_5465	0x00d6
-+#define PCI_DEVICE_ID_CIRRUS_6729	0x1100
-+#define PCI_DEVICE_ID_CIRRUS_6832	0x1110
-+#define PCI_DEVICE_ID_CIRRUS_7542	0x1200
-+#define PCI_DEVICE_ID_CIRRUS_7543	0x1202
-+#define PCI_DEVICE_ID_CIRRUS_7541	0x1204
-+
-+#define PCI_VENDOR_ID_IBM		0x1014
-+#define PCI_DEVICE_ID_IBM_FIRE_CORAL	0x000a
-+#define PCI_DEVICE_ID_IBM_TR		0x0018
-+#define PCI_DEVICE_ID_IBM_82G2675	0x001d
-+#define PCI_DEVICE_ID_IBM_MCA		0x0020
-+#define PCI_DEVICE_ID_IBM_82351		0x0022
-+#define PCI_DEVICE_ID_IBM_PYTHON	0x002d
-+#define PCI_DEVICE_ID_IBM_SERVERAID	0x002e
-+#define PCI_DEVICE_ID_IBM_TR_WAKE	0x003e
-+#define PCI_DEVICE_ID_IBM_MPIC		0x0046
-+#define PCI_DEVICE_ID_IBM_3780IDSP	0x007d
-+#define PCI_DEVICE_ID_IBM_CHUKAR	0x0096
-+#define PCI_DEVICE_ID_IBM_CPC710_PCI64	0x00fc
-+#define PCI_DEVICE_ID_IBM_CPC710_PCI32	0x0105
-+#define	PCI_DEVICE_ID_IBM_405GP		0x0156
-+#define PCI_DEVICE_ID_IBM_SNIPE		0x0180
-+#define PCI_DEVICE_ID_IBM_SERVERAIDI960	0x01bd
-+#define PCI_DEVICE_ID_IBM_CITRINE		0x028C
-+#define PCI_DEVICE_ID_IBM_GEMSTONE		0xB166
-+#define PCI_DEVICE_ID_IBM_MPIC_2	0xffff
-+#define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_1	0x0031
-+#define PCI_DEVICE_ID_IBM_ICOM_DEV_ID_2	0x0219
-+#define PCI_DEVICE_ID_IBM_ICOM_V2_TWO_PORTS_RVX		0x021A
-+#define PCI_DEVICE_ID_IBM_ICOM_V2_ONE_PORT_RVX_ONE_PORT_MDM	0x0251
-+#define PCI_DEVICE_ID_IBM_ICOM_FOUR_PORT_MODEL	0x252
-+
-+#define PCI_VENDOR_ID_COMPEX2		0x101a // pci.ids says "AT&T GIS (NCR)"
-+#define PCI_DEVICE_ID_COMPEX2_100VG	0x0005
-+
-+#define PCI_VENDOR_ID_WD		0x101c
-+#define PCI_DEVICE_ID_WD_7197		0x3296
-+#define PCI_DEVICE_ID_WD_90C		0xc24a
-+
-+#define PCI_VENDOR_ID_AMI		0x101e
-+#define PCI_DEVICE_ID_AMI_MEGARAID3	0x1960
-+#define PCI_DEVICE_ID_AMI_MEGARAID	0x9010
-+#define PCI_DEVICE_ID_AMI_MEGARAID2	0x9060
-+
-+#define PCI_VENDOR_ID_AMD		0x1022
-+#define PCI_DEVICE_ID_AMD_LANCE		0x2000
-+#define PCI_DEVICE_ID_AMD_LANCE_HOME	0x2001
-+#define PCI_DEVICE_ID_AMD_SCSI		0x2020
-+#define PCI_DEVICE_ID_AMD_SERENADE	0x36c0
-+#define PCI_DEVICE_ID_AMD_FE_GATE_7006	0x7006
-+#define PCI_DEVICE_ID_AMD_FE_GATE_7007	0x7007
-+#define PCI_DEVICE_ID_AMD_FE_GATE_700C	0x700C
-+#define PCI_DEVICE_ID_AMD_FE_GATE_700D	0x700D
-+#define PCI_DEVICE_ID_AMD_FE_GATE_700E	0x700E
-+#define PCI_DEVICE_ID_AMD_FE_GATE_700F	0x700F
-+#define PCI_DEVICE_ID_AMD_COBRA_7400	0x7400
-+#define PCI_DEVICE_ID_AMD_COBRA_7401	0x7401
-+#define PCI_DEVICE_ID_AMD_COBRA_7403	0x7403
-+#define PCI_DEVICE_ID_AMD_COBRA_7404	0x7404
-+#define PCI_DEVICE_ID_AMD_VIPER_7408	0x7408
-+#define PCI_DEVICE_ID_AMD_VIPER_7409	0x7409
-+#define PCI_DEVICE_ID_AMD_VIPER_740B	0x740B
-+#define PCI_DEVICE_ID_AMD_VIPER_740C	0x740C
-+#define PCI_DEVICE_ID_AMD_VIPER_7410	0x7410
-+#define PCI_DEVICE_ID_AMD_VIPER_7411	0x7411
-+#define PCI_DEVICE_ID_AMD_VIPER_7413	0x7413
-+#define PCI_DEVICE_ID_AMD_VIPER_7414	0x7414
-+#define PCI_DEVICE_ID_AMD_OPUS_7440	0x7440
-+#	define PCI_DEVICE_ID_AMD_VIPER_7440	PCI_DEVICE_ID_AMD_OPUS_7440
-+#define PCI_DEVICE_ID_AMD_OPUS_7441	0x7441
-+#	define PCI_DEVICE_ID_AMD_VIPER_7441	PCI_DEVICE_ID_AMD_OPUS_7441
-+#define PCI_DEVICE_ID_AMD_OPUS_7443	0x7443
-+#	define PCI_DEVICE_ID_AMD_VIPER_7443	PCI_DEVICE_ID_AMD_OPUS_7443
-+#define PCI_DEVICE_ID_AMD_OPUS_7445	0x7445
-+#define PCI_DEVICE_ID_AMD_OPUS_7448	0x7448
-+# define	PCI_DEVICE_ID_AMD_VIPER_7448	PCI_DEVICE_ID_AMD_OPUS_7448
-+#define PCI_DEVICE_ID_AMD_OPUS_7449	0x7449
-+#	define PCI_DEVICE_ID_AMD_VIPER_7449	PCI_DEVICE_ID_AMD_OPUS_7449
-+#define PCI_DEVICE_ID_AMD_8111_LAN	0x7462
-+#define PCI_DEVICE_ID_AMD_8111_LPC	0x7468
-+#define PCI_DEVICE_ID_AMD_8111_IDE	0x7469
-+#define PCI_DEVICE_ID_AMD_8111_SMBUS2	0x746a
-+#define PCI_DEVICE_ID_AMD_8111_SMBUS	0x746b
-+#define PCI_DEVICE_ID_AMD_8111_AUDIO	0x746d
-+#define PCI_DEVICE_ID_AMD_8151_0	0x7454
-+#define PCI_DEVICE_ID_AMD_8131_APIC     0x7450
-+
-+#define PCI_VENDOR_ID_TRIDENT		0x1023
-+#define PCI_DEVICE_ID_TRIDENT_4DWAVE_DX	0x2000
-+#define PCI_DEVICE_ID_TRIDENT_4DWAVE_NX	0x2001
-+#define PCI_DEVICE_ID_TRIDENT_9320	0x9320
-+#define PCI_DEVICE_ID_TRIDENT_9388	0x9388
-+#define PCI_DEVICE_ID_TRIDENT_9397	0x9397
-+#define PCI_DEVICE_ID_TRIDENT_939A	0x939A
-+#define PCI_DEVICE_ID_TRIDENT_9520	0x9520
-+#define PCI_DEVICE_ID_TRIDENT_9525	0x9525
-+#define PCI_DEVICE_ID_TRIDENT_9420	0x9420
-+#define PCI_DEVICE_ID_TRIDENT_9440	0x9440
-+#define PCI_DEVICE_ID_TRIDENT_9660	0x9660
-+#define PCI_DEVICE_ID_TRIDENT_9750	0x9750
-+#define PCI_DEVICE_ID_TRIDENT_9850	0x9850
-+#define PCI_DEVICE_ID_TRIDENT_9880	0x9880
-+#define PCI_DEVICE_ID_TRIDENT_8400	0x8400
-+#define PCI_DEVICE_ID_TRIDENT_8420	0x8420
-+#define PCI_DEVICE_ID_TRIDENT_8500	0x8500
-+
-+#define PCI_VENDOR_ID_AI		0x1025
-+#define PCI_DEVICE_ID_AI_M1435		0x1435
-+
-+#define PCI_VENDOR_ID_DELL		0x1028
-+#define PCI_DEVICE_ID_DELL_RACIII	0x0008
-+#define PCI_DEVICE_ID_DELL_RAC4		0x0012
-+
-+#define PCI_VENDOR_ID_MATROX		0x102B
-+#define PCI_DEVICE_ID_MATROX_MGA_2	0x0518
-+#define PCI_DEVICE_ID_MATROX_MIL	0x0519
-+#define PCI_DEVICE_ID_MATROX_MYS	0x051A
-+#define PCI_DEVICE_ID_MATROX_MIL_2	0x051b
-+#define PCI_DEVICE_ID_MATROX_MIL_2_AGP	0x051f
-+#define PCI_DEVICE_ID_MATROX_MGA_IMP	0x0d10
-+#define PCI_DEVICE_ID_MATROX_G100_MM	0x1000
-+#define PCI_DEVICE_ID_MATROX_G100_AGP	0x1001
-+#define PCI_DEVICE_ID_MATROX_G200_PCI	0x0520
-+#define PCI_DEVICE_ID_MATROX_G200_AGP	0x0521
-+#define	PCI_DEVICE_ID_MATROX_G400	0x0525
-+#define PCI_DEVICE_ID_MATROX_G550	0x2527
-+#define PCI_DEVICE_ID_MATROX_VIA	0x4536
-+
-+#define PCI_VENDOR_ID_CT		0x102c
-+#define PCI_DEVICE_ID_CT_69000		0x00c0
-+#define PCI_DEVICE_ID_CT_65545		0x00d8
-+#define PCI_DEVICE_ID_CT_65548		0x00dc
-+#define PCI_DEVICE_ID_CT_65550		0x00e0
-+#define PCI_DEVICE_ID_CT_65554		0x00e4
-+#define PCI_DEVICE_ID_CT_65555		0x00e5
-+
-+#define PCI_VENDOR_ID_MIRO		0x1031
-+#define PCI_DEVICE_ID_MIRO_36050	0x5601
-+#define PCI_DEVICE_ID_MIRO_DC10PLUS	0x7efe
-+#define PCI_DEVICE_ID_MIRO_DC30PLUS	0xd801
-+
-+#define PCI_VENDOR_ID_NEC		0x1033
-+#define PCI_DEVICE_ID_NEC_CBUS_1	0x0001 /* PCI-Cbus Bridge */
-+#define PCI_DEVICE_ID_NEC_LOCAL		0x0002 /* Local Bridge */
-+#define PCI_DEVICE_ID_NEC_ATM		0x0003 /* ATM LAN Controller */
-+#define PCI_DEVICE_ID_NEC_R4000		0x0004 /* R4000 Bridge */
-+#define PCI_DEVICE_ID_NEC_486		0x0005 /* 486 Like Peripheral Bus Bridge */
-+#define PCI_DEVICE_ID_NEC_ACCEL_1	0x0006 /* Graphic Accelerator */
-+#define PCI_DEVICE_ID_NEC_UXBUS		0x0007 /* UX-Bus Bridge */
-+#define PCI_DEVICE_ID_NEC_ACCEL_2	0x0008 /* Graphic Accelerator */
-+#define PCI_DEVICE_ID_NEC_GRAPH		0x0009 /* PCI-CoreGraph Bridge */
-+#define PCI_DEVICE_ID_NEC_VL		0x0016 /* PCI-VL Bridge */
-+#define PCI_DEVICE_ID_NEC_STARALPHA2	0x002c /* STAR ALPHA2 */
-+#define PCI_DEVICE_ID_NEC_CBUS_2	0x002d /* PCI-Cbus Bridge */
-+#define PCI_DEVICE_ID_NEC_USB		0x0035 /* PCI-USB Host */
-+#define PCI_DEVICE_ID_NEC_CBUS_3	0x003b
-+#define PCI_DEVICE_ID_NEC_NAPCCARD	0x003e
-+#define PCI_DEVICE_ID_NEC_PCX2		0x0046 /* PowerVR */
-+#define PCI_DEVICE_ID_NEC_NILE4		0x005a
-+#define PCI_DEVICE_ID_NEC_VRC5476       0x009b
-+#define PCI_DEVICE_ID_NEC_VRC4173	0x00a5
-+#define PCI_DEVICE_ID_NEC_VRC5477_AC97  0x00a6
-+#define PCI_DEVICE_ID_NEC_PC9821CS01    0x800c /* PC-9821-CS01 */
-+#define PCI_DEVICE_ID_NEC_PC9821NRB06   0x800d /* PC-9821NR-B06 */
-+
-+#define PCI_VENDOR_ID_FD		0x1036
-+#define PCI_DEVICE_ID_FD_36C70		0x0000
-+
-+#define PCI_VENDOR_ID_SI		0x1039
-+#define PCI_DEVICE_ID_SI_5591_AGP	0x0001
-+#define PCI_DEVICE_ID_SI_6202		0x0002
-+#define PCI_DEVICE_ID_SI_503		0x0008
-+#define PCI_DEVICE_ID_SI_ACPI		0x0009
-+#define PCI_DEVICE_ID_SI_SMBUS		0x0016
-+#define PCI_DEVICE_ID_SI_LPC		0x0018
-+#define PCI_DEVICE_ID_SI_5597_VGA	0x0200
-+#define PCI_DEVICE_ID_SI_6205		0x0205
-+#define PCI_DEVICE_ID_SI_501		0x0406
-+#define PCI_DEVICE_ID_SI_496		0x0496
-+#define PCI_DEVICE_ID_SI_300		0x0300
-+#define PCI_DEVICE_ID_SI_315H		0x0310
-+#define PCI_DEVICE_ID_SI_315		0x0315
-+#define PCI_DEVICE_ID_SI_315PRO		0x0325
-+#define PCI_DEVICE_ID_SI_530		0x0530
-+#define PCI_DEVICE_ID_SI_540		0x0540
-+#define PCI_DEVICE_ID_SI_550		0x0550
-+#define PCI_DEVICE_ID_SI_540_VGA	0x5300
-+#define PCI_DEVICE_ID_SI_550_VGA	0x5315
-+#define PCI_DEVICE_ID_SI_601		0x0601
-+#define PCI_DEVICE_ID_SI_620		0x0620
-+#define PCI_DEVICE_ID_SI_630		0x0630
-+#define PCI_DEVICE_ID_SI_633		0x0633
-+#define PCI_DEVICE_ID_SI_635		0x0635
-+#define PCI_DEVICE_ID_SI_640		0x0640
-+#define PCI_DEVICE_ID_SI_645		0x0645
-+#define PCI_DEVICE_ID_SI_646		0x0646
-+#define PCI_DEVICE_ID_SI_648		0x0648
-+#define PCI_DEVICE_ID_SI_650		0x0650
-+#define PCI_DEVICE_ID_SI_651		0x0651
-+#define PCI_DEVICE_ID_SI_652		0x0652
-+#define PCI_DEVICE_ID_SI_655		0x0655
-+#define PCI_DEVICE_ID_SI_661		0x0661
-+#define PCI_DEVICE_ID_SI_730		0x0730
-+#define PCI_DEVICE_ID_SI_733		0x0733
-+#define PCI_DEVICE_ID_SI_630_VGA	0x6300
-+#define PCI_DEVICE_ID_SI_730_VGA	0x7300
-+#define PCI_DEVICE_ID_SI_735		0x0735
-+#define PCI_DEVICE_ID_SI_740		0x0740
-+#define PCI_DEVICE_ID_SI_741		0x0741
-+#define PCI_DEVICE_ID_SI_745		0x0745
-+#define PCI_DEVICE_ID_SI_746		0x0746
-+#define PCI_DEVICE_ID_SI_748		0x0748
-+#define PCI_DEVICE_ID_SI_750		0x0750
-+#define PCI_DEVICE_ID_SI_751		0x0751
-+#define PCI_DEVICE_ID_SI_752		0x0752
-+#define PCI_DEVICE_ID_SI_755		0x0755
-+#define PCI_DEVICE_ID_SI_760		0x0760
-+#define PCI_DEVICE_ID_SI_900		0x0900
-+#define PCI_DEVICE_ID_SI_961		0x0961
-+#define PCI_DEVICE_ID_SI_962		0x0962
-+#define PCI_DEVICE_ID_SI_963		0x0963
-+#define PCI_DEVICE_ID_SI_5107		0x5107
-+#define PCI_DEVICE_ID_SI_5300		0x5300
-+#define PCI_DEVICE_ID_SI_5511		0x5511
-+#define PCI_DEVICE_ID_SI_5513		0x5513
-+#define PCI_DEVICE_ID_SI_5518		0x5518
-+#define PCI_DEVICE_ID_SI_5571		0x5571
-+#define PCI_DEVICE_ID_SI_5581		0x5581
-+#define PCI_DEVICE_ID_SI_5582		0x5582
-+#define PCI_DEVICE_ID_SI_5591		0x5591
-+#define PCI_DEVICE_ID_SI_5596		0x5596
-+#define PCI_DEVICE_ID_SI_5597		0x5597
-+#define PCI_DEVICE_ID_SI_5598		0x5598
-+#define PCI_DEVICE_ID_SI_5600		0x5600
-+#define PCI_DEVICE_ID_SI_6300		0x6300
-+#define PCI_DEVICE_ID_SI_6306		0x6306
-+#define PCI_DEVICE_ID_SI_6326		0x6326
-+#define PCI_DEVICE_ID_SI_7001		0x7001
-+#define PCI_DEVICE_ID_SI_7012		0x7012
-+#define PCI_DEVICE_ID_SI_7016		0x7016
-+
-+#define PCI_VENDOR_ID_HP		0x103c
-+#define PCI_DEVICE_ID_HP_VISUALIZE_EG	0x1005
-+#define PCI_DEVICE_ID_HP_VISUALIZE_FX6	0x1006
-+#define PCI_DEVICE_ID_HP_VISUALIZE_FX4	0x1008
-+#define PCI_DEVICE_ID_HP_VISUALIZE_FX2	0x100a
-+#define PCI_DEVICE_ID_HP_TACHYON	0x1028
-+#define PCI_DEVICE_ID_HP_TACHLITE	0x1029
-+#define PCI_DEVICE_ID_HP_J2585A		0x1030
-+#define PCI_DEVICE_ID_HP_J2585B		0x1031
-+#define PCI_DEVICE_ID_HP_J2973A		0x1040
-+#define PCI_DEVICE_ID_HP_J2970A		0x1042
-+#define PCI_DEVICE_ID_HP_DIVA		0x1048
-+#define PCI_DEVICE_ID_HP_DIVA_TOSCA1	0x1049
-+#define PCI_DEVICE_ID_HP_DIVA_TOSCA2	0x104A
-+#define PCI_DEVICE_ID_HP_DIVA_MAESTRO	0x104B
-+#define PCI_DEVICE_ID_HP_PCI_LBA	0x1054
-+#define PCI_DEVICE_ID_HP_REO_SBA	0x10f0
-+#define PCI_DEVICE_ID_HP_REO_IOC	0x10f1
-+#define PCI_DEVICE_ID_HP_VISUALIZE_FXE	0x108b
-+#define PCI_DEVICE_ID_HP_DIVA_HALFDOME	0x1223
-+#define PCI_DEVICE_ID_HP_DIVA_KEYSTONE	0x1226
-+#define PCI_DEVICE_ID_HP_DIVA_POWERBAR	0x1227
-+#define PCI_DEVICE_ID_HP_ZX1_SBA	0x1229
-+#define PCI_DEVICE_ID_HP_ZX1_IOC	0x122a
-+#define PCI_DEVICE_ID_HP_PCIX_LBA	0x122e
-+#define PCI_DEVICE_ID_HP_SX1000_IOC	0x127c
-+#define PCI_DEVICE_ID_HP_DIVA_EVEREST	0x1282
-+#define PCI_DEVICE_ID_HP_DIVA_AUX	0x1290
-+#define PCI_DEVICE_ID_HP_DIVA_RMP3	0x1301
-+#define PCI_DEVICE_ID_HP_CISSA		0x3220
-+#define PCI_DEVICE_ID_HP_CISSB		0x3230
-+#define PCI_DEVICE_ID_HP_ZX2_IOC	0x4031
-+
-+#define PCI_VENDOR_ID_PCTECH		0x1042
-+#define PCI_DEVICE_ID_PCTECH_RZ1000	0x1000
-+#define PCI_DEVICE_ID_PCTECH_RZ1001	0x1001
-+#define PCI_DEVICE_ID_PCTECH_SAMURAI_0	0x3000
-+#define PCI_DEVICE_ID_PCTECH_SAMURAI_1	0x3010
-+#define PCI_DEVICE_ID_PCTECH_SAMURAI_IDE 0x3020
-+
-+#define PCI_VENDOR_ID_ASUSTEK		0x1043
-+#define PCI_DEVICE_ID_ASUSTEK_0675	0x0675
-+
-+#define PCI_VENDOR_ID_DPT		0x1044
-+#define PCI_DEVICE_ID_DPT		0xa400
-+
-+#define PCI_VENDOR_ID_OPTI		0x1045
-+#define PCI_DEVICE_ID_OPTI_92C178	0xc178
-+#define PCI_DEVICE_ID_OPTI_82C557	0xc557
-+#define PCI_DEVICE_ID_OPTI_82C558	0xc558
-+#define PCI_DEVICE_ID_OPTI_82C621	0xc621
-+#define PCI_DEVICE_ID_OPTI_82C700	0xc700
-+#define PCI_DEVICE_ID_OPTI_82C701	0xc701
-+#define PCI_DEVICE_ID_OPTI_82C814	0xc814
-+#define PCI_DEVICE_ID_OPTI_82C822	0xc822
-+#define PCI_DEVICE_ID_OPTI_82C861	0xc861
-+#define PCI_DEVICE_ID_OPTI_82C825	0xd568
-+
-+#define PCI_VENDOR_ID_ELSA		0x1048
-+#define PCI_DEVICE_ID_ELSA_MICROLINK	0x1000
-+#define PCI_DEVICE_ID_ELSA_QS3000	0x3000
-+
-+#define PCI_VENDOR_ID_SGS		0x104a
-+#define PCI_DEVICE_ID_SGS_2000		0x0008
-+#define PCI_DEVICE_ID_SGS_1764		0x0009
-+
-+#define PCI_VENDOR_ID_BUSLOGIC		      0x104B
-+#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER_NC 0x0140
-+#define PCI_DEVICE_ID_BUSLOGIC_MULTIMASTER    0x1040
-+#define PCI_DEVICE_ID_BUSLOGIC_FLASHPOINT     0x8130
-+
-+#define PCI_VENDOR_ID_TI		0x104c
-+#define PCI_DEVICE_ID_TI_TVP4010	0x3d04
-+#define PCI_DEVICE_ID_TI_TVP4020	0x3d07
-+#define PCI_DEVICE_ID_TI_4450		0x8011
-+#define PCI_DEVICE_ID_TI_1130		0xac12
-+#define PCI_DEVICE_ID_TI_1031		0xac13
-+#define PCI_DEVICE_ID_TI_1131		0xac15
-+#define PCI_DEVICE_ID_TI_1250		0xac16
-+#define PCI_DEVICE_ID_TI_1220		0xac17
-+#define PCI_DEVICE_ID_TI_1221		0xac19
-+#define PCI_DEVICE_ID_TI_1210		0xac1a
-+#define PCI_DEVICE_ID_TI_1450		0xac1b
-+#define PCI_DEVICE_ID_TI_1225		0xac1c
-+#define PCI_DEVICE_ID_TI_1251A		0xac1d
-+#define PCI_DEVICE_ID_TI_1211		0xac1e
-+#define PCI_DEVICE_ID_TI_1251B		0xac1f
-+#define PCI_DEVICE_ID_TI_4410		0xac41
-+#define PCI_DEVICE_ID_TI_4451		0xac42
-+#define PCI_DEVICE_ID_TI_4510		0xac44
-+#define PCI_DEVICE_ID_TI_4520		0xac46
-+#define PCI_DEVICE_ID_TI_1410		0xac50
-+#define PCI_DEVICE_ID_TI_1420		0xac51
-+#define PCI_DEVICE_ID_TI_1451A		0xac52
-+#define PCI_DEVICE_ID_TI_1620		0xac54
-+#define PCI_DEVICE_ID_TI_1520		0xac55
-+#define PCI_DEVICE_ID_TI_1510		0xac56
-+
-+#define PCI_VENDOR_ID_SONY		0x104d
-+#define PCI_DEVICE_ID_SONY_CXD3222	0x8039
-+
-+#define PCI_VENDOR_ID_OAK		0x104e
-+#define PCI_DEVICE_ID_OAK_OTI107	0x0107
-+
-+/* Winbond have two vendor IDs! See 0x10ad as well */
-+#define PCI_VENDOR_ID_WINBOND2		0x1050
-+#define PCI_DEVICE_ID_WINBOND2_89C940	0x0940
-+#define PCI_DEVICE_ID_WINBOND2_89C940F	0x5a5a
-+#define PCI_DEVICE_ID_WINBOND2_6692	0x6692
-+
-+#define PCI_VENDOR_ID_ANIGMA		0x1051
-+#define PCI_DEVICE_ID_ANIGMA_MC145575	0x0100
-+  
-+#define PCI_VENDOR_ID_EFAR		0x1055
-+#define PCI_DEVICE_ID_EFAR_SLC90E66_1	0x9130
-+#define PCI_DEVICE_ID_EFAR_SLC90E66_0	0x9460
-+#define PCI_DEVICE_ID_EFAR_SLC90E66_2	0x9462
-+#define PCI_DEVICE_ID_EFAR_SLC90E66_3	0x9463
-+
-+#define PCI_VENDOR_ID_MOTOROLA		0x1057
-+#define PCI_VENDOR_ID_MOTOROLA_OOPS	0x1507
-+#define PCI_DEVICE_ID_MOTOROLA_MPC105	0x0001
-+#define PCI_DEVICE_ID_MOTOROLA_MPC106	0x0002
-+#define PCI_DEVICE_ID_MOTOROLA_MPC107	0x0004
-+#define PCI_DEVICE_ID_MOTOROLA_RAVEN	0x4801
-+#define PCI_DEVICE_ID_MOTOROLA_FALCON	0x4802
-+#define PCI_DEVICE_ID_MOTOROLA_HAWK	0x4803
-+#define PCI_DEVICE_ID_MOTOROLA_CPX8216	0x4806
-+#define PCI_DEVICE_ID_MOTOROLA_HARRIER	0x480b
-+#define PCI_DEVICE_ID_MOTOROLA_MPC5200	0x5803
-+
-+#define PCI_VENDOR_ID_PROMISE		0x105a
-+#define PCI_DEVICE_ID_PROMISE_20265	0x0d30
-+#define PCI_DEVICE_ID_PROMISE_20267	0x4d30
-+#define PCI_DEVICE_ID_PROMISE_20246	0x4d33
-+#define PCI_DEVICE_ID_PROMISE_20262	0x4d38
-+#define PCI_DEVICE_ID_PROMISE_20263	0x0D38
-+#define PCI_DEVICE_ID_PROMISE_20268	0x4d68
-+#define PCI_DEVICE_ID_PROMISE_20268R	0x6268
-+#define PCI_DEVICE_ID_PROMISE_20269	0x4d69
-+#define PCI_DEVICE_ID_PROMISE_20270	0x6268
-+#define PCI_DEVICE_ID_PROMISE_20271	0x6269
-+#define PCI_DEVICE_ID_PROMISE_20275	0x1275
-+#define PCI_DEVICE_ID_PROMISE_20276	0x5275
-+#define PCI_DEVICE_ID_PROMISE_20277	0x7275
-+#define PCI_DEVICE_ID_PROMISE_5300	0x5300
-+
-+#define PCI_VENDOR_ID_N9		0x105d
-+#define PCI_DEVICE_ID_N9_I128		0x2309
-+#define PCI_DEVICE_ID_N9_I128_2		0x2339
-+#define PCI_DEVICE_ID_N9_I128_T2R	0x493d
-+
-+#define PCI_VENDOR_ID_UMC		0x1060
-+#define PCI_DEVICE_ID_UMC_UM8673F	0x0101
-+#define PCI_DEVICE_ID_UMC_UM8891A	0x0891
-+#define PCI_DEVICE_ID_UMC_UM8886BF	0x673a
-+#define PCI_DEVICE_ID_UMC_UM8886A	0x886a
-+#define PCI_DEVICE_ID_UMC_UM8881F	0x8881
-+#define PCI_DEVICE_ID_UMC_UM8886F	0x8886
-+#define PCI_DEVICE_ID_UMC_UM9017F	0x9017
-+#define PCI_DEVICE_ID_UMC_UM8886N	0xe886
-+#define PCI_DEVICE_ID_UMC_UM8891N	0xe891
-+
-+#define PCI_VENDOR_ID_X			0x1061
-+#define PCI_DEVICE_ID_X_AGX016		0x0001
-+
-+#define PCI_VENDOR_ID_MYLEX		0x1069
-+#define PCI_DEVICE_ID_MYLEX_DAC960_P	0x0001
-+#define PCI_DEVICE_ID_MYLEX_DAC960_PD	0x0002
-+#define PCI_DEVICE_ID_MYLEX_DAC960_PG	0x0010
-+#define PCI_DEVICE_ID_MYLEX_DAC960_LA	0x0020
-+#define PCI_DEVICE_ID_MYLEX_DAC960_LP	0x0050
-+#define PCI_DEVICE_ID_MYLEX_DAC960_BA	0xBA56
-+#define PCI_DEVICE_ID_MYLEX_DAC960_GEM	0xB166
-+
-+#define PCI_VENDOR_ID_PICOP		0x1066
-+#define PCI_DEVICE_ID_PICOP_PT86C52X	0x0001
-+#define PCI_DEVICE_ID_PICOP_PT80C524	0x8002
-+
-+#define PCI_VENDOR_ID_APPLE		0x106b
-+#define PCI_DEVICE_ID_APPLE_BANDIT	0x0001
-+#define PCI_DEVICE_ID_APPLE_GC		0x0002
-+#define PCI_DEVICE_ID_APPLE_HYDRA	0x000e
-+#define PCI_DEVICE_ID_APPLE_UNI_N_FW	0x0018
-+#define PCI_DEVICE_ID_APPLE_KL_USB	0x0019
-+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP	0x0020
-+#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC	0x0021
-+#define PCI_DEVICE_ID_APPLE_KEYLARGO	0x0022
-+#define PCI_DEVICE_ID_APPLE_UNI_N_GMACP	0x0024
-+#define PCI_DEVICE_ID_APPLE_KEYLARGO_P	0x0025
-+#define PCI_DEVICE_ID_APPLE_KL_USB_P	0x0026
-+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP_P	0x0027
-+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP15	0x002d
-+#define PCI_DEVICE_ID_APPLE_UNI_N_PCI15	0x002e
-+#define PCI_DEVICE_ID_APPLE_UNI_N_FW2	0x0030
-+#define PCI_DEVICE_ID_APPLE_UNI_N_GMAC2	0x0032
-+#define PCI_DEVIEC_ID_APPLE_UNI_N_ATA	0x0033
-+#define PCI_DEVICE_ID_APPLE_UNI_N_AGP2	0x0034
-+#define PCI_DEVICE_ID_APPLE_IPID_ATA100	0x003b
-+#define PCI_DEVICE_ID_APPLE_KEYLARGO_I	0x003e
-+#define PCI_DEVICE_ID_APPLE_K2_ATA100	0x0043
-+#define PCI_DEVICE_ID_APPLE_U3_AGP	0x004b
-+#define PCI_DEVICE_ID_APPLE_K2_GMAC	0x004c
-+#define PCI_DEVICE_ID_APPLE_SH_ATA      0x0050
-+#define PCI_DEVICE_ID_APPLE_SH_SUNGEM   0x0051
-+#define PCI_DEVICE_ID_APPLE_SH_FW       0x0052
-+#define PCI_DEVICE_ID_APPLE_U3L_AGP	0x0058
-+#define PCI_DEVICE_ID_APPLE_U3H_AGP	0x0059
-+#define PCI_DEVICE_ID_APPLE_TIGON3	0x1645
-+
-+#define PCI_VENDOR_ID_YAMAHA		0x1073
-+#define PCI_DEVICE_ID_YAMAHA_724	0x0004
-+#define PCI_DEVICE_ID_YAMAHA_724F	0x000d
-+#define PCI_DEVICE_ID_YAMAHA_740	0x000a
-+#define PCI_DEVICE_ID_YAMAHA_740C	0x000c
-+#define PCI_DEVICE_ID_YAMAHA_744	0x0010
-+#define PCI_DEVICE_ID_YAMAHA_754	0x0012
-+
-+#define PCI_VENDOR_ID_NEXGEN		0x1074
-+#define PCI_DEVICE_ID_NEXGEN_82C501	0x4e78
-+
-+#define PCI_VENDOR_ID_QLOGIC		0x1077
-+#define PCI_DEVICE_ID_QLOGIC_ISP1020	0x1020
-+#define PCI_DEVICE_ID_QLOGIC_ISP1022	0x1022
-+#define PCI_DEVICE_ID_QLOGIC_ISP2100	0x2100
-+#define PCI_DEVICE_ID_QLOGIC_ISP2200	0x2200
-+
-+#define PCI_VENDOR_ID_CYRIX		0x1078
-+#define PCI_DEVICE_ID_CYRIX_5510	0x0000
-+#define PCI_DEVICE_ID_CYRIX_PCI_MASTER	0x0001
-+#define PCI_DEVICE_ID_CYRIX_5520	0x0002
-+#define PCI_DEVICE_ID_CYRIX_5530_LEGACY	0x0100
-+#define PCI_DEVICE_ID_CYRIX_5530_SMI	0x0101
-+#define PCI_DEVICE_ID_CYRIX_5530_IDE	0x0102
-+#define PCI_DEVICE_ID_CYRIX_5530_AUDIO	0x0103
-+#define PCI_DEVICE_ID_CYRIX_5530_VIDEO	0x0104
-+
-+#define PCI_VENDOR_ID_LEADTEK		0x107d
-+#define PCI_DEVICE_ID_LEADTEK_805	0x0000
-+
-+#define PCI_VENDOR_ID_INTERPHASE	0x107e
-+#define PCI_DEVICE_ID_INTERPHASE_5526	0x0004
-+#define PCI_DEVICE_ID_INTERPHASE_55x6	0x0005
-+#define PCI_DEVICE_ID_INTERPHASE_5575	0x0008
-+
-+#define PCI_VENDOR_ID_CONTAQ		0x1080
-+#define PCI_DEVICE_ID_CONTAQ_82C599	0x0600
-+#define PCI_DEVICE_ID_CONTAQ_82C693	0xc693
-+
-+#define PCI_VENDOR_ID_FOREX		0x1083
-+
-+#define PCI_VENDOR_ID_OLICOM		0x108d
-+#define PCI_DEVICE_ID_OLICOM_OC3136	0x0001
-+#define PCI_DEVICE_ID_OLICOM_OC2315	0x0011
-+#define PCI_DEVICE_ID_OLICOM_OC2325	0x0012
-+#define PCI_DEVICE_ID_OLICOM_OC2183	0x0013
-+#define PCI_DEVICE_ID_OLICOM_OC2326	0x0014
-+#define PCI_DEVICE_ID_OLICOM_OC6151	0x0021
-+
-+#define PCI_VENDOR_ID_SUN		0x108e
-+#define PCI_DEVICE_ID_SUN_EBUS		0x1000
-+#define PCI_DEVICE_ID_SUN_HAPPYMEAL	0x1001
-+#define PCI_DEVICE_ID_SUN_RIO_EBUS	0x1100
-+#define PCI_DEVICE_ID_SUN_RIO_GEM	0x1101
-+#define PCI_DEVICE_ID_SUN_RIO_1394	0x1102
-+#define PCI_DEVICE_ID_SUN_RIO_USB	0x1103
-+#define PCI_DEVICE_ID_SUN_GEM		0x2bad
-+#define PCI_DEVICE_ID_SUN_SIMBA		0x5000
-+#define PCI_DEVICE_ID_SUN_PBM		0x8000
-+#define PCI_DEVICE_ID_SUN_SCHIZO	0x8001
-+#define PCI_DEVICE_ID_SUN_SABRE		0xa000
-+#define PCI_DEVICE_ID_SUN_HUMMINGBIRD	0xa001
-+#define PCI_DEVICE_ID_SUN_TOMATILLO	0xa801
-+
-+#define PCI_VENDOR_ID_CMD		0x1095
-+#define PCI_DEVICE_ID_CMD_640		0x0640
-+#define PCI_DEVICE_ID_CMD_643		0x0643
-+#define PCI_DEVICE_ID_CMD_646		0x0646
-+#define PCI_DEVICE_ID_CMD_647		0x0647
-+#define PCI_DEVICE_ID_CMD_648		0x0648
-+#define PCI_DEVICE_ID_CMD_649		0x0649
-+#define PCI_DEVICE_ID_CMD_670		0x0670
-+#define PCI_DEVICE_ID_CMD_680		0x0680
-+
-+#define PCI_DEVICE_ID_SII_680		0x0680
-+#define PCI_DEVICE_ID_SII_3112		0x3112
-+#define PCI_DEVICE_ID_SII_1210SA	0x0240
-+
-+#define PCI_VENDOR_ID_VISION		0x1098
-+#define PCI_DEVICE_ID_VISION_QD8500	0x0001
-+#define PCI_DEVICE_ID_VISION_QD8580	0x0002
-+
-+#define PCI_VENDOR_ID_BROOKTREE		0x109e
-+#define PCI_DEVICE_ID_BROOKTREE_848	0x0350
-+#define PCI_DEVICE_ID_BROOKTREE_849A	0x0351
-+#define PCI_DEVICE_ID_BROOKTREE_878_1	0x036e
-+#define PCI_DEVICE_ID_BROOKTREE_878	0x0878
-+#define PCI_DEVICE_ID_BROOKTREE_8474	0x8474
-+
-+#define PCI_VENDOR_ID_SIERRA		0x10a8
-+#define PCI_DEVICE_ID_SIERRA_STB	0x0000
-+
-+#define PCI_VENDOR_ID_SGI		0x10a9
-+#define PCI_DEVICE_ID_SGI_IOC3		0x0003
-+#define PCI_DEVICE_ID_SGI_IOC4		0x100a
-+#define PCI_VENDOR_ID_SGI_LITHIUM	0x1002
-+
-+#define PCI_VENDOR_ID_ACC		0x10aa
-+#define PCI_DEVICE_ID_ACC_2056		0x0000
-+
-+#define PCI_VENDOR_ID_WINBOND		0x10ad
-+#define PCI_DEVICE_ID_WINBOND_83769	0x0001
-+#define PCI_DEVICE_ID_WINBOND_82C105	0x0105
-+#define PCI_DEVICE_ID_WINBOND_83C553	0x0565
-+
-+#define PCI_VENDOR_ID_DATABOOK		0x10b3
-+#define PCI_DEVICE_ID_DATABOOK_87144	0xb106
-+
-+#define PCI_VENDOR_ID_PLX		0x10b5
-+#define PCI_DEVICE_ID_PLX_R685		0x1030
-+#define PCI_DEVICE_ID_PLX_ROMULUS	0x106a
-+#define PCI_DEVICE_ID_PLX_SPCOM800	0x1076
-+#define PCI_DEVICE_ID_PLX_1077		0x1077
-+#define PCI_DEVICE_ID_PLX_SPCOM200	0x1103
-+#define PCI_DEVICE_ID_PLX_DJINN_ITOO	0x1151
-+#define PCI_DEVICE_ID_PLX_R753		0x1152
-+#define PCI_DEVICE_ID_PLX_9030		0x9030
-+#define PCI_DEVICE_ID_PLX_9050		0x9050
-+#define PCI_DEVICE_ID_PLX_9060		0x9060
-+#define PCI_DEVICE_ID_PLX_9060ES	0x906E
-+#define PCI_DEVICE_ID_PLX_9060SD	0x906D
-+#define PCI_DEVICE_ID_PLX_9080		0x9080
-+#define PCI_DEVICE_ID_PLX_GTEK_SERIAL2	0xa001
-+
-+#define PCI_VENDOR_ID_MADGE		0x10b6
-+#define PCI_DEVICE_ID_MADGE_MK2		0x0002
-+#define PCI_DEVICE_ID_MADGE_C155S	0x1001
-+
-+#define PCI_VENDOR_ID_3COM		0x10b7
-+#define PCI_DEVICE_ID_3COM_3C985	0x0001
-+#define PCI_DEVICE_ID_3COM_3C940	0x1700
-+#define PCI_DEVICE_ID_3COM_3C339	0x3390
-+#define PCI_DEVICE_ID_3COM_3C359	0x3590
-+#define PCI_DEVICE_ID_3COM_3C590	0x5900
-+#define PCI_DEVICE_ID_3COM_3C595TX	0x5950
-+#define PCI_DEVICE_ID_3COM_3C595T4	0x5951
-+#define PCI_DEVICE_ID_3COM_3C595MII	0x5952
-+#define PCI_DEVICE_ID_3COM_3C940B	0x80eb
-+#define PCI_DEVICE_ID_3COM_3C900TPO	0x9000
-+#define PCI_DEVICE_ID_3COM_3C900COMBO	0x9001
-+#define PCI_DEVICE_ID_3COM_3C905TX	0x9050
-+#define PCI_DEVICE_ID_3COM_3C905T4	0x9051
-+#define PCI_DEVICE_ID_3COM_3C905B_TX	0x9055
-+#define PCI_DEVICE_ID_3COM_3CR990	0x9900
-+#define PCI_DEVICE_ID_3COM_3CR990_TX_95	0x9902
-+#define PCI_DEVICE_ID_3COM_3CR990_TX_97	0x9903
-+#define PCI_DEVICE_ID_3COM_3CR990B	0x9904
-+#define PCI_DEVICE_ID_3COM_3CR990_FX	0x9905
-+#define PCI_DEVICE_ID_3COM_3CR990SVR95	0x9908
-+#define PCI_DEVICE_ID_3COM_3CR990SVR97	0x9909
-+#define PCI_DEVICE_ID_3COM_3CR990SVR	0x990a
-+
-+#define PCI_VENDOR_ID_SMC		0x10b8
-+#define PCI_DEVICE_ID_SMC_EPIC100	0x0005
-+
-+#define PCI_VENDOR_ID_AL		0x10b9
-+#define PCI_DEVICE_ID_AL_M1445		0x1445
-+#define PCI_DEVICE_ID_AL_M1449		0x1449
-+#define PCI_DEVICE_ID_AL_M1451		0x1451
-+#define PCI_DEVICE_ID_AL_M1461		0x1461
-+#define PCI_DEVICE_ID_AL_M1489		0x1489
-+#define PCI_DEVICE_ID_AL_M1511		0x1511
-+#define PCI_DEVICE_ID_AL_M1513		0x1513
-+#define PCI_DEVICE_ID_AL_M1521		0x1521
-+#define PCI_DEVICE_ID_AL_M1523		0x1523
-+#define PCI_DEVICE_ID_AL_M1531		0x1531
-+#define PCI_DEVICE_ID_AL_M1533		0x1533
-+#define PCI_DEVICE_ID_AL_M1535 		0x1535
-+#define PCI_DEVICE_ID_AL_M1541		0x1541
-+#define PCI_DEVICE_ID_AL_M1543		0x1543
-+#define PCI_DEVICE_ID_AL_M1563		0x1563
-+#define PCI_DEVICE_ID_AL_M1621		0x1621
-+#define PCI_DEVICE_ID_AL_M1631		0x1631
-+#define PCI_DEVICE_ID_AL_M1632		0x1632
-+#define PCI_DEVICE_ID_AL_M1641		0x1641
-+#define PCI_DEVICE_ID_AL_M1644		0x1644
-+#define PCI_DEVICE_ID_AL_M1647		0x1647
-+#define PCI_DEVICE_ID_AL_M1651		0x1651
-+#define PCI_DEVICE_ID_AL_M1671		0x1671
-+#define PCI_DEVICE_ID_AL_M1681		0x1681
-+#define PCI_DEVICE_ID_AL_M1683		0x1683
-+#define PCI_DEVICE_ID_AL_M1689		0x1689
-+#define PCI_DEVICE_ID_AL_M3307		0x3307
-+#define PCI_DEVICE_ID_AL_M4803		0x5215
-+#define PCI_DEVICE_ID_AL_M5219		0x5219
-+#define PCI_DEVICE_ID_AL_M5228		0x5228
-+#define PCI_DEVICE_ID_AL_M5229		0x5229
-+#define PCI_DEVICE_ID_AL_M5237		0x5237
-+#define PCI_DEVICE_ID_AL_M5243		0x5243
-+#define PCI_DEVICE_ID_AL_M5451		0x5451
-+#define PCI_DEVICE_ID_AL_M7101		0x7101
-+
-+#define PCI_VENDOR_ID_MITSUBISHI	0x10ba
-+
-+#define PCI_VENDOR_ID_SURECOM		0x10bd
-+#define PCI_DEVICE_ID_SURECOM_NE34	0x0e34
-+
-+#define PCI_VENDOR_ID_NEOMAGIC		0x10c8
-+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_NM2070 0x0001
-+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128V 0x0002
-+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128ZV 0x0003
-+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_NM2160 0x0004
-+#define PCI_DEVICE_ID_NEOMAGIC_MAGICMEDIA_256AV       0x0005
-+#define PCI_DEVICE_ID_NEOMAGIC_MAGICGRAPH_128ZVPLUS   0x0083
-+
-+#define PCI_VENDOR_ID_ASP		0x10cd
-+#define PCI_DEVICE_ID_ASP_ABP940	0x1200
-+#define PCI_DEVICE_ID_ASP_ABP940U	0x1300
-+#define PCI_DEVICE_ID_ASP_ABP940UW	0x2300
-+
-+#define PCI_VENDOR_ID_MACRONIX		0x10d9
-+#define PCI_DEVICE_ID_MACRONIX_MX98713	0x0512
-+#define PCI_DEVICE_ID_MACRONIX_MX987x5	0x0531
-+
-+#define PCI_VENDOR_ID_TCONRAD		0x10da
-+#define PCI_DEVICE_ID_TCONRAD_TOKENRING	0x0508
-+
-+#define PCI_VENDOR_ID_CERN		0x10dc
-+#define PCI_DEVICE_ID_CERN_SPSB_PMC	0x0001
-+#define PCI_DEVICE_ID_CERN_SPSB_PCI	0x0002
-+#define PCI_DEVICE_ID_CERN_HIPPI_DST	0x0021
-+#define PCI_DEVICE_ID_CERN_HIPPI_SRC	0x0022
-+
-+#define PCI_VENDOR_ID_NVIDIA			0x10de
-+#define PCI_DEVICE_ID_NVIDIA_TNT		0x0020
-+#define PCI_DEVICE_ID_NVIDIA_TNT2		0x0028
-+#define PCI_DEVICE_ID_NVIDIA_UTNT2		0x0029
-+#define PCI_DEVICE_ID_NVIDIA_TNT_UNKNOWN        0x002a
-+#define PCI_DEVICE_ID_NVIDIA_VTNT2		0x002C
-+#define PCI_DEVICE_ID_NVIDIA_UVTNT2		0x002D
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_IDE	0x0035
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA	0x0036
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_10		0x0037
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_11		0x0038
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP04_SATA2	0x003e
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_ULTRA 0x0040
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800       0x0041
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_LE    0x0042
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800_GT    0x0045
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_4000     0x004E
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE4_SMBUS	0x0052
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_IDE	0x0053
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA	0x0054
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_CK804_SATA2	0x0055
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_8		0x0056
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_9		0x0057
-+#define PCI_DEVICE_ID_NVIDIA_CK804_AUDIO	0x0059
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE2_SMBUS	0x0064
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE2_IDE	0x0065
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_2		0x0066
-+#define PCI_DEVICE_ID_NVIDIA_MCP2_AUDIO		0x006a
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SMBUS	0x0084
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_IDE	0x0085
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_4		0x0086
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_5		0x008c
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE2S_SATA	0x008e
-+#define PCI_DEVICE_ID_NVIDIA_ITNT2		0x00A0
-+#define PCI_DEVICE_ID_GEFORCE_6800A             0x00c1
-+#define PCI_DEVICE_ID_GEFORCE_6800A_LE          0x00c2
-+#define PCI_DEVICE_ID_GEFORCE_GO_6800           0x00c8
-+#define PCI_DEVICE_ID_GEFORCE_GO_6800_ULTRA     0x00c9
-+#define PCI_DEVICE_ID_QUADRO_FX_GO1400          0x00cc
-+#define PCI_DEVICE_ID_QUADRO_FX_1400            0x00ce
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE3		0x00d1
-+#define PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO		0x00da
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE3_SMBUS	0x00d4
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE3_IDE	0x00d5
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_3		0x00d6
-+#define PCI_DEVICE_ID_NVIDIA_MCP3_AUDIO		0x00da
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_7		0x00df
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S		0x00e1
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA	0x00e3
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SMBUS	0x00e4
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_IDE	0x00e5
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_6		0x00e6
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE3S_SATA2	0x00ee
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_SDR	0x0100
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_DDR	0x0101
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO		0x0103
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX	0x0110
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_MX2	0x0111
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GO	0x0112
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO2_MXR	0x0113
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6600_GT	0x0140
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6600	0x0141
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6610_XL	0x0145
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_540	0x014E
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6200	0x014F
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS	0x0150
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_GTS2	0x0151
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE2_ULTRA	0x0152
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO2_PRO	0x0153
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6200_TURBOCACHE 0x0161
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6200    0x0164
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6250    0x0166
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6200_1  0x0167
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_GO_6250_1  0x0168
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_460	0x0170
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440	0x0171
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420	0x0172
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440_SE	0x0173
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_440_GO	0x0174
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_420_GO	0x0175
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_420_GO_M32 0x0176
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_460_GO    0x0177
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_500XGL	0x0178
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_440_GO_M64 0x0179
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_200	0x017A
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_550XGL	0x017B
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_500_GOGL	0x017C
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_410_GO_M16 0x017D
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440_8X 0x0181
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_440SE_8X 0x0182
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_420_8X 0x0183
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_448_GO    0x0186
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_488_GO    0x0187
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_580_XGL    0x0188
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_MX_MAC    0x0189
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_280_NVS    0x018A
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_380_XGL    0x018B
-+#define PCI_DEVICE_ID_NVIDIA_IGEFORCE2		0x01a0
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE		0x01a4
-+#define PCI_DEVICE_ID_NVIDIA_MCP1_AUDIO		0x01b1
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_SMBUS	0x01b4
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_IDE		0x01bc
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_1		0x01c3
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE2		0x01e0
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE3		0x0200
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE3_1		0x0201
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE3_2		0x0202
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_DDC		0x0203
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B      0x0211
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B_LE   0x0212
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_6800B_GT   0x0215
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4600	0x0250
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4400	0x0251
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4200	0x0253
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_900XGL	0x0258
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_750XGL	0x0259
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_700XGL	0x025B
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_IDE	0x0265
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA	0x0266
-+#define PCI_DEVICE_ID_NVIDIA_NFORCE_MCP51_SATA2	0x0267
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_12		0x0268
-+#define PCI_DEVICE_ID_NVIDIA_NVENET_13		0x0269
-+#define PCI_DEVICE_ID_NVIDIA_MCP51_AUDIO	0x026B
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800	0x0280
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800_8X    0x0281
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_TI_4800SE     0x0282
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE4_4200_GO       0x0286
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_980_XGL        0x0288
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_780_XGL        0x0289
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO4_700_GOGL       0x028C
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5800_ULTRA  0x0301
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5800        0x0302
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_2000         0x0308
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1000         0x0309
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600_ULTRA  0x0311
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600        0x0312
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5600SE      0x0314
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5600      0x031A
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5650      0x031B
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO700        0x031C
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200        0x0320
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200_ULTRA  0x0321
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200_1      0x0322
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5200SE      0x0323
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5200      0x0324
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5250      0x0325
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5500        0x0326
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5100        0x0327
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5250_32   0x0328
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO_5200	    0x0329
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_NVS_280_PCI     0x032A
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_500          0x032B
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5300      0x032C
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5100      0x032D
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900_ULTRA  0x0330
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900        0x0331
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900XT      0x0332
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5950_ULTRA  0x0333
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5900ZT      0x0334
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_3000         0x0338
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_700          0x033F
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700_ULTRA  0x0341
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700        0x0342
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700LE      0x0343
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_5700VE      0x0344
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_1    0x0347
-+#define PCI_DEVICE_ID_NVIDIA_GEFORCE_FX_GO5700_2    0x0348
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_GO1000       0x034C
-+#define PCI_DEVICE_ID_NVIDIA_QUADRO_FX_1100         0x034E
-+
-+#define PCI_VENDOR_ID_IMS		0x10e0
-+#define PCI_DEVICE_ID_IMS_8849		0x8849
-+#define PCI_DEVICE_ID_IMS_TT128		0x9128
-+#define PCI_DEVICE_ID_IMS_TT3D		0x9135
-+
-+#define PCI_VENDOR_ID_TEKRAM2		0x10e1
-+#define PCI_DEVICE_ID_TEKRAM2_690c	0x690c
-+
-+#define PCI_VENDOR_ID_TUNDRA		0x10e3
-+#define PCI_DEVICE_ID_TUNDRA_CA91C042	0x0000
-+
-+#define PCI_VENDOR_ID_AMCC		0x10e8
-+#define PCI_DEVICE_ID_AMCC_MYRINET	0x8043
-+#define PCI_DEVICE_ID_AMCC_PARASTATION	0x8062
-+#define PCI_DEVICE_ID_AMCC_S5933	0x807d
-+#define PCI_DEVICE_ID_AMCC_S5933_HEPC3	0x809c
-+
-+#define PCI_VENDOR_ID_INTERG		0x10ea
-+#define PCI_DEVICE_ID_INTERG_1680	0x1680
-+#define PCI_DEVICE_ID_INTERG_1682	0x1682
-+#define PCI_DEVICE_ID_INTERG_2000	0x2000
-+#define PCI_DEVICE_ID_INTERG_2010	0x2010
-+#define PCI_DEVICE_ID_INTERG_5000	0x5000
-+#define PCI_DEVICE_ID_INTERG_5050	0x5050
-+
-+#define PCI_VENDOR_ID_REALTEK		0x10ec
-+#define PCI_DEVICE_ID_REALTEK_8029	0x8029
-+#define PCI_DEVICE_ID_REALTEK_8129	0x8129
-+#define PCI_DEVICE_ID_REALTEK_8139	0x8139
-+#define PCI_DEVICE_ID_REALTEK_8169	0x8169
-+
-+#define PCI_VENDOR_ID_XILINX		0x10ee
-+#define PCI_DEVICE_ID_TURBOPAM		0x4020
-+
-+#define PCI_VENDOR_ID_TRUEVISION	0x10fa
-+#define PCI_DEVICE_ID_TRUEVISION_T1000	0x000c
-+
-+#define PCI_VENDOR_ID_INIT		0x1101
-+#define PCI_DEVICE_ID_INIT_320P		0x9100
-+#define PCI_DEVICE_ID_INIT_360P		0x9500
-+
-+#define PCI_VENDOR_ID_CREATIVE		0x1102 // duplicate: ECTIVA
-+#define PCI_DEVICE_ID_CREATIVE_EMU10K1	0x0002
-+
-+#define PCI_VENDOR_ID_ECTIVA		0x1102 // duplicate: CREATIVE
-+#define PCI_DEVICE_ID_ECTIVA_EV1938	0x8938
-+
-+#define PCI_VENDOR_ID_TTI		0x1103
-+#define PCI_DEVICE_ID_TTI_HPT343	0x0003
-+#define PCI_DEVICE_ID_TTI_HPT366	0x0004
-+#define PCI_DEVICE_ID_TTI_HPT372	0x0005
-+#define PCI_DEVICE_ID_TTI_HPT302	0x0006
-+#define PCI_DEVICE_ID_TTI_HPT371	0x0007
-+#define PCI_DEVICE_ID_TTI_HPT374	0x0008
-+#define PCI_DEVICE_ID_TTI_HPT372N	0x0009	// apparently a 372N variant?
-+
-+#define PCI_VENDOR_ID_VIA		0x1106
-+#define PCI_DEVICE_ID_VIA_8763_0	0x0198
-+#define PCI_DEVICE_ID_VIA_8380_0	0x0204
-+#define PCI_DEVICE_ID_VIA_3238_0	0x0238
-+#define PCI_DEVICE_ID_VIA_PT880		0x0258
-+#define PCI_DEVICE_ID_VIA_PX8X0_0	0x0259
-+#define PCI_DEVICE_ID_VIA_3269_0	0x0269
-+#define PCI_DEVICE_ID_VIA_K8T800PRO_0	0x0282
-+#define PCI_DEVICE_ID_VIA_8363_0	0x0305
-+#define PCI_DEVICE_ID_VIA_8371_0	0x0391
-+#define PCI_DEVICE_ID_VIA_8501_0	0x0501
-+#define PCI_DEVICE_ID_VIA_82C505	0x0505
-+#define PCI_DEVICE_ID_VIA_82C561	0x0561
-+#define PCI_DEVICE_ID_VIA_82C586_1	0x0571
-+#define PCI_DEVICE_ID_VIA_82C576	0x0576
-+#define PCI_DEVICE_ID_VIA_82C585	0x0585
-+#define PCI_DEVICE_ID_VIA_82C586_0	0x0586
-+#define PCI_DEVICE_ID_VIA_82C595	0x0595
-+#define PCI_DEVICE_ID_VIA_82C596	0x0596
-+#define PCI_DEVICE_ID_VIA_82C597_0	0x0597
-+#define PCI_DEVICE_ID_VIA_82C598_0	0x0598
-+#define PCI_DEVICE_ID_VIA_8601_0	0x0601
-+#define PCI_DEVICE_ID_VIA_8605_0	0x0605
-+#define PCI_DEVICE_ID_VIA_82C680	0x0680
-+#define PCI_DEVICE_ID_VIA_82C686	0x0686
-+#define PCI_DEVICE_ID_VIA_82C691_0	0x0691
-+#define PCI_DEVICE_ID_VIA_82C693	0x0693
-+#define PCI_DEVICE_ID_VIA_82C693_1	0x0698
-+#define PCI_DEVICE_ID_VIA_82C926	0x0926
-+#define PCI_DEVICE_ID_VIA_82C576_1	0x1571
-+#define PCI_DEVICE_ID_VIA_82C595_97	0x1595
-+#define PCI_DEVICE_ID_VIA_82C586_2	0x3038
-+#define PCI_DEVICE_ID_VIA_82C586_3	0x3040
-+#define PCI_DEVICE_ID_VIA_6305		0x3044
-+#define PCI_DEVICE_ID_VIA_82C596_3	0x3050
-+#define PCI_DEVICE_ID_VIA_82C596B_3	0x3051
-+#define PCI_DEVICE_ID_VIA_82C686_4	0x3057
-+#define PCI_DEVICE_ID_VIA_82C686_5	0x3058
-+#define PCI_DEVICE_ID_VIA_8233_5	0x3059
-+#define PCI_DEVICE_ID_VIA_8233_7	0x3065
-+#define PCI_DEVICE_ID_VIA_82C686_6	0x3068
-+#define PCI_DEVICE_ID_VIA_8233_0	0x3074
-+#define PCI_DEVICE_ID_VIA_8633_0	0x3091
-+#define PCI_DEVICE_ID_VIA_8367_0	0x3099
-+#define PCI_DEVICE_ID_VIA_8653_0	0x3101
-+#define PCI_DEVICE_ID_VIA_8622		0x3102
-+#define PCI_DEVICE_ID_VIA_8233C_0	0x3109
-+#define PCI_DEVICE_ID_VIA_8361		0x3112
-+#define PCI_DEVICE_ID_VIA_XM266		0x3116
-+#define PCI_DEVICE_ID_VIA_612X		0x3119
-+#define PCI_DEVICE_ID_VIA_862X_0	0x3123
-+#define PCI_DEVICE_ID_VIA_8753_0	0x3128
-+#define PCI_DEVICE_ID_VIA_8233A		0x3147
-+#define PCI_DEVICE_ID_VIA_8703_51_0	0x3148
-+#define PCI_DEVICE_ID_VIA_8237_SATA	0x3149
-+#define PCI_DEVICE_ID_VIA_XN266		0x3156
-+#define PCI_DEVICE_ID_VIA_8754C_0	0x3168
-+#define PCI_DEVICE_ID_VIA_8235		0x3177
-+#define PCI_DEVICE_ID_VIA_P4N333	0x3178
-+#define PCI_DEVICE_ID_VIA_8385_0	0x3188
-+#define PCI_DEVICE_ID_VIA_8377_0	0x3189
-+#define PCI_DEVICE_ID_VIA_8378_0	0x3205
-+#define PCI_DEVICE_ID_VIA_8783_0	0x3208
-+#define PCI_DEVICE_ID_VIA_P4M400	0x3209
-+#define PCI_DEVICE_ID_VIA_8237		0x3227
-+#define PCI_DEVICE_ID_VIA_3296_0	0x0296
-+#define PCI_DEVICE_ID_VIA_86C100A	0x6100
-+#define PCI_DEVICE_ID_VIA_8231		0x8231
-+#define PCI_DEVICE_ID_VIA_8231_4	0x8235
-+#define PCI_DEVICE_ID_VIA_8365_1	0x8305
-+#define PCI_DEVICE_ID_VIA_8371_1	0x8391
-+#define PCI_DEVICE_ID_VIA_8501_1	0x8501
-+#define PCI_DEVICE_ID_VIA_82C597_1	0x8597
-+#define PCI_DEVICE_ID_VIA_82C598_1	0x8598
-+#define PCI_DEVICE_ID_VIA_8601_1	0x8601
-+#define PCI_DEVICE_ID_VIA_8505_1	0x8605
-+#define PCI_DEVICE_ID_VIA_8633_1	0xB091
-+#define PCI_DEVICE_ID_VIA_8367_1	0xB099
-+#define PCI_DEVICE_ID_VIA_P4X266_1	0xB101
-+#define PCI_DEVICE_ID_VIA_8615_1	0xB103
-+#define PCI_DEVICE_ID_VIA_8361_1	0xB112
-+#define PCI_DEVICE_ID_VIA_8235_1	0xB168
-+#define PCI_DEVICE_ID_VIA_838X_1	0xB188
-+#define PCI_DEVICE_ID_VIA_83_87XX_1	0xB198
-+
-+#define PCI_VENDOR_ID_SIEMENS           0x110A
-+#define PCI_DEVICE_ID_SIEMENS_DSCC4     0x2102
-+
-+#define PCI_VENDOR_ID_SMC2		0x1113
-+#define PCI_DEVICE_ID_SMC2_1211TX	0x1211
-+
-+#define PCI_VENDOR_ID_VORTEX		0x1119
-+#define PCI_DEVICE_ID_VORTEX_GDT60x0	0x0000
-+#define PCI_DEVICE_ID_VORTEX_GDT6000B	0x0001
-+#define PCI_DEVICE_ID_VORTEX_GDT6x10	0x0002
-+#define PCI_DEVICE_ID_VORTEX_GDT6x20	0x0003
-+#define PCI_DEVICE_ID_VORTEX_GDT6530	0x0004
-+#define PCI_DEVICE_ID_VORTEX_GDT6550	0x0005
-+#define PCI_DEVICE_ID_VORTEX_GDT6x17	0x0006
-+#define PCI_DEVICE_ID_VORTEX_GDT6x27	0x0007
-+#define PCI_DEVICE_ID_VORTEX_GDT6537	0x0008
-+#define PCI_DEVICE_ID_VORTEX_GDT6557	0x0009
-+#define PCI_DEVICE_ID_VORTEX_GDT6x15	0x000a
-+#define PCI_DEVICE_ID_VORTEX_GDT6x25	0x000b
-+#define PCI_DEVICE_ID_VORTEX_GDT6535	0x000c
-+#define PCI_DEVICE_ID_VORTEX_GDT6555	0x000d
-+#define PCI_DEVICE_ID_VORTEX_GDT6x17RP	0x0100
-+#define PCI_DEVICE_ID_VORTEX_GDT6x27RP	0x0101
-+#define PCI_DEVICE_ID_VORTEX_GDT6537RP	0x0102
-+#define PCI_DEVICE_ID_VORTEX_GDT6557RP	0x0103
-+#define PCI_DEVICE_ID_VORTEX_GDT6x11RP	0x0104
-+#define PCI_DEVICE_ID_VORTEX_GDT6x21RP	0x0105
-+#define PCI_DEVICE_ID_VORTEX_GDT6x17RP1	0x0110
-+#define PCI_DEVICE_ID_VORTEX_GDT6x27RP1	0x0111
-+#define PCI_DEVICE_ID_VORTEX_GDT6537RP1	0x0112
-+#define PCI_DEVICE_ID_VORTEX_GDT6557RP1	0x0113
-+#define PCI_DEVICE_ID_VORTEX_GDT6x11RP1	0x0114
-+#define PCI_DEVICE_ID_VORTEX_GDT6x21RP1	0x0115
-+#define PCI_DEVICE_ID_VORTEX_GDT6x17RP2	0x0120
-+#define PCI_DEVICE_ID_VORTEX_GDT6x27RP2	0x0121
-+#define PCI_DEVICE_ID_VORTEX_GDT6537RP2	0x0122
-+#define PCI_DEVICE_ID_VORTEX_GDT6557RP2	0x0123
-+#define PCI_DEVICE_ID_VORTEX_GDT6x11RP2	0x0124
-+#define PCI_DEVICE_ID_VORTEX_GDT6x21RP2	0x0125
-+
-+#define PCI_VENDOR_ID_EF		0x111a
-+#define PCI_DEVICE_ID_EF_ATM_FPGA	0x0000
-+#define PCI_DEVICE_ID_EF_ATM_ASIC	0x0002
-+#define PCI_VENDOR_ID_EF_ATM_LANAI2	0x0003
-+#define PCI_VENDOR_ID_EF_ATM_LANAIHB	0x0005
-+
-+#define PCI_VENDOR_ID_IDT		0x111d
-+#define PCI_DEVICE_ID_IDT_IDT77201	0x0001
-+
-+#define PCI_VENDOR_ID_FORE		0x1127
-+#define PCI_DEVICE_ID_FORE_PCA200PC	0x0210
-+#define PCI_DEVICE_ID_FORE_PCA200E	0x0300
-+
-+#define PCI_VENDOR_ID_IMAGINGTECH	0x112f
-+#define PCI_DEVICE_ID_IMAGINGTECH_ICPCI	0x0000
-+
-+#define PCI_VENDOR_ID_PHILIPS		0x1131
-+#define PCI_DEVICE_ID_PHILIPS_SAA7145	0x7145
-+#define PCI_DEVICE_ID_PHILIPS_SAA7146	0x7146
-+#define PCI_DEVICE_ID_PHILIPS_SAA9730	0x9730
-+
-+#define PCI_VENDOR_ID_EICON		0x1133
-+#define PCI_DEVICE_ID_EICON_DIVA20PRO	0xe001
-+#define PCI_DEVICE_ID_EICON_DIVA20	0xe002
-+#define PCI_DEVICE_ID_EICON_DIVA20PRO_U	0xe003
-+#define PCI_DEVICE_ID_EICON_DIVA20_U	0xe004
-+#define PCI_DEVICE_ID_EICON_DIVA201	0xe005
-+#define PCI_DEVICE_ID_EICON_DIVA202	0xe00b
-+#define PCI_DEVICE_ID_EICON_MAESTRA	0xe010
-+#define PCI_DEVICE_ID_EICON_MAESTRAQ	0xe012
-+#define PCI_DEVICE_ID_EICON_MAESTRAQ_U	0xe013
-+#define PCI_DEVICE_ID_EICON_MAESTRAP	0xe014
-+
-+#define PCI_VENDOR_ID_ZIATECH		0x1138
-+#define PCI_DEVICE_ID_ZIATECH_5550_HC	0x5550
-+ 
-+#define PCI_VENDOR_ID_CYCLONE		0x113c
-+#define PCI_DEVICE_ID_CYCLONE_SDK	0x0001
-+
-+#define PCI_VENDOR_ID_ALLIANCE		0x1142
-+#define PCI_DEVICE_ID_ALLIANCE_PROMOTIO	0x3210
-+#define PCI_DEVICE_ID_ALLIANCE_PROVIDEO	0x6422
-+#define PCI_DEVICE_ID_ALLIANCE_AT24	0x6424
-+#define PCI_DEVICE_ID_ALLIANCE_AT3D	0x643d
-+
-+#define PCI_VENDOR_ID_SYSKONNECT	0x1148
-+#define PCI_DEVICE_ID_SYSKONNECT_FP	0x4000
-+#define PCI_DEVICE_ID_SYSKONNECT_TR	0x4200
-+#define PCI_DEVICE_ID_SYSKONNECT_GE	0x4300
-+#define PCI_DEVICE_ID_SYSKONNECT_YU	0x4320
-+#define PCI_DEVICE_ID_SYSKONNECT_9DXX	0x4400
-+#define PCI_DEVICE_ID_SYSKONNECT_9MXX	0x4500
-+
-+#define PCI_VENDOR_ID_VMIC		0x114a
-+#define PCI_DEVICE_ID_VMIC_VME		0x7587
-+
-+#define PCI_VENDOR_ID_DIGI		0x114f
-+#define PCI_DEVICE_ID_DIGI_EPC		0x0002
-+#define PCI_DEVICE_ID_DIGI_RIGHTSWITCH	0x0003
-+#define PCI_DEVICE_ID_DIGI_XEM		0x0004
-+#define PCI_DEVICE_ID_DIGI_XR		0x0005
-+#define PCI_DEVICE_ID_DIGI_CX		0x0006
-+#define PCI_DEVICE_ID_DIGI_XRJ		0x0009
-+#define PCI_DEVICE_ID_DIGI_EPCJ		0x000a
-+#define PCI_DEVICE_ID_DIGI_XR_920	0x0027
-+#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_E	0x0070
-+#define PCI_DEVICE_ID_DIGI_DF_M_E	0x0071
-+#define PCI_DEVICE_ID_DIGI_DF_M_IOM2_A	0x0072
-+#define PCI_DEVICE_ID_DIGI_DF_M_A	0x0073
-+#define PCI_DEVICE_ID_NEO_2DB9          0x00C8
-+#define PCI_DEVICE_ID_NEO_2DB9PRI       0x00C9
-+#define PCI_DEVICE_ID_NEO_2RJ45         0x00CA
-+#define PCI_DEVICE_ID_NEO_2RJ45PRI      0x00CB
-+
-+#define PCI_VENDOR_ID_MUTECH		0x1159
-+#define PCI_DEVICE_ID_MUTECH_MV1000	0x0001
-+
-+#define PCI_VENDOR_ID_XIRCOM		0x115d
-+#define PCI_DEVICE_ID_XIRCOM_X3201_ETH	0x0003
-+#define PCI_DEVICE_ID_XIRCOM_RBM56G	0x0101
-+#define PCI_DEVICE_ID_XIRCOM_X3201_MDM	0x0103
-+
-+#define PCI_VENDOR_ID_RENDITION		0x1163
-+#define PCI_DEVICE_ID_RENDITION_VERITE	0x0001
-+#define PCI_DEVICE_ID_RENDITION_VERITE2100 0x2000
-+
-+#define PCI_VENDOR_ID_SERVERWORKS	  0x1166
-+#define PCI_DEVICE_ID_SERVERWORKS_HE	  0x0008
-+#define PCI_DEVICE_ID_SERVERWORKS_LE	  0x0009
-+#define PCI_DEVICE_ID_SERVERWORKS_CIOB30  0x0010
-+#define PCI_DEVICE_ID_SERVERWORKS_CMIC_HE 0x0011
-+#define PCI_DEVICE_ID_SERVERWORKS_GCNB_LE 0x0017
-+#define PCI_DEVICE_ID_SERVERWORKS_OSB4	  0x0200
-+#define PCI_DEVICE_ID_SERVERWORKS_CSB5	  0x0201
-+#define PCI_DEVICE_ID_SERVERWORKS_CSB6    0x0203
-+#define PCI_DEVICE_ID_SERVERWORKS_OSB4IDE 0x0211
-+#define PCI_DEVICE_ID_SERVERWORKS_CSB5IDE 0x0212
-+#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE 0x0213
-+#define PCI_DEVICE_ID_SERVERWORKS_CSB6IDE2 0x0217
-+#define PCI_DEVICE_ID_SERVERWORKS_OSB4USB 0x0220
-+#define PCI_DEVICE_ID_SERVERWORKS_CSB5USB PCI_DEVICE_ID_SERVERWORKS_OSB4USB
-+#define PCI_DEVICE_ID_SERVERWORKS_CSB6USB 0x0221
-+#define PCI_DEVICE_ID_SERVERWORKS_GCLE    0x0225
-+#define PCI_DEVICE_ID_SERVERWORKS_GCLE2   0x0227
-+#define PCI_DEVICE_ID_SERVERWORKS_CSB5ISA 0x0230
-+
-+#define PCI_VENDOR_ID_SBE		0x1176
-+#define PCI_DEVICE_ID_SBE_WANXL100	0x0301
-+#define PCI_DEVICE_ID_SBE_WANXL200	0x0302
-+#define PCI_DEVICE_ID_SBE_WANXL400	0x0104
-+
-+#define PCI_VENDOR_ID_TOSHIBA		0x1179
-+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO	0x0102
-+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_1	0x0103
-+#define PCI_DEVICE_ID_TOSHIBA_PICCOLO_2	0x0105
-+#define PCI_DEVICE_ID_TOSHIBA_601	0x0601
-+#define PCI_DEVICE_ID_TOSHIBA_TOPIC95	0x060a
-+#define PCI_DEVICE_ID_TOSHIBA_TOPIC95_A 0x0603
-+#define PCI_DEVICE_ID_TOSHIBA_TOPIC95_B 0x060a
-+#define PCI_DEVICE_ID_TOSHIBA_TOPIC97	0x060f
-+#define PCI_DEVICE_ID_TOSHIBA_TOPIC100	0x0617
-+
-+#define PCI_VENDOR_ID_TOSHIBA_2		0x102f
-+#define PCI_DEVICE_ID_TOSHIBA_TX3927	0x000a
-+#define PCI_DEVICE_ID_TOSHIBA_TC35815CF	0x0030
-+#define PCI_DEVICE_ID_TOSHIBA_TX4927	0x0180
-+#define PCI_DEVICE_ID_TOSHIBA_TC86C001_MISC	0x0108
-+
-+#define PCI_VENDOR_ID_RICOH		0x1180
-+#define PCI_DEVICE_ID_RICOH_RL5C465	0x0465
-+#define PCI_DEVICE_ID_RICOH_RL5C466	0x0466
-+#define PCI_DEVICE_ID_RICOH_RL5C475	0x0475
-+#define PCI_DEVICE_ID_RICOH_RL5C476	0x0476
-+#define PCI_DEVICE_ID_RICOH_RL5C478	0x0478
-+
-+#define PCI_VENDOR_ID_DLINK		0x1186
-+#define PCI_DEVICE_ID_DLINK_DGE510T	0x4c00
-+
-+#define PCI_VENDOR_ID_ARTOP		0x1191
-+#define PCI_DEVICE_ID_ARTOP_ATP8400	0x0004
-+#define PCI_DEVICE_ID_ARTOP_ATP850UF	0x0005
-+#define PCI_DEVICE_ID_ARTOP_ATP860	0x0006
-+#define PCI_DEVICE_ID_ARTOP_ATP860R	0x0007
-+#define PCI_DEVICE_ID_ARTOP_ATP865	0x0008
-+#define PCI_DEVICE_ID_ARTOP_ATP865R	0x0009
-+#define PCI_DEVICE_ID_ARTOP_AEC7610	0x8002
-+#define PCI_DEVICE_ID_ARTOP_AEC7612UW	0x8010
-+#define PCI_DEVICE_ID_ARTOP_AEC7612U	0x8020
-+#define PCI_DEVICE_ID_ARTOP_AEC7612S	0x8030
-+#define PCI_DEVICE_ID_ARTOP_AEC7612D	0x8040
-+#define PCI_DEVICE_ID_ARTOP_AEC7612SUW	0x8050
-+#define PCI_DEVICE_ID_ARTOP_8060	0x8060
-+#define PCI_DEVICE_ID_ARTOP_AEC67160	0x8080
-+#define PCI_DEVICE_ID_ARTOP_AEC67160_2	0x8081
-+#define PCI_DEVICE_ID_ARTOP_AEC67162	0x808a
-+
-+#define PCI_VENDOR_ID_ZEITNET		0x1193
-+#define PCI_DEVICE_ID_ZEITNET_1221	0x0001
-+#define PCI_DEVICE_ID_ZEITNET_1225	0x0002
-+
-+#define PCI_VENDOR_ID_OMEGA		0x119b
-+#define PCI_DEVICE_ID_OMEGA_82C092G	0x1221
-+
-+#define PCI_VENDOR_ID_FUJITSU_ME	0x119e
-+#define PCI_DEVICE_ID_FUJITSU_FS155	0x0001
-+#define PCI_DEVICE_ID_FUJITSU_FS50	0x0003
-+
-+#define PCI_SUBVENDOR_ID_KEYSPAN	0x11a9
-+#define PCI_SUBDEVICE_ID_KEYSPAN_SX2	0x5334
-+
-+#define PCI_VENDOR_ID_MARVELL		0x11ab
-+#define PCI_DEVICE_ID_MARVELL_GT64011	0x4146
-+#define PCI_DEVICE_ID_MARVELL_GT64111	0x4146
-+#define PCI_DEVICE_ID_MARVELL_GT64260	0x6430
-+#define PCI_DEVICE_ID_MARVELL_MV64360	0x6460
-+#define PCI_DEVICE_ID_MARVELL_MV64460	0x6480
-+#define PCI_DEVICE_ID_MARVELL_GT96100	0x9652
-+#define PCI_DEVICE_ID_MARVELL_GT96100A	0x9653
-+
-+#define PCI_VENDOR_ID_LITEON		0x11ad
-+#define PCI_DEVICE_ID_LITEON_LNE100TX	0x0002
-+
-+#define PCI_VENDOR_ID_V3		0x11b0
-+#define PCI_DEVICE_ID_V3_V960		0x0001
-+#define PCI_DEVICE_ID_V3_V350		0x0001
-+#define PCI_DEVICE_ID_V3_V961		0x0002
-+#define PCI_DEVICE_ID_V3_V351		0x0002
-+
-+#define PCI_VENDOR_ID_NP		0x11bc
-+#define PCI_DEVICE_ID_NP_PCI_FDDI	0x0001
-+
-+#define PCI_VENDOR_ID_ATT		0x11c1
-+#define PCI_DEVICE_ID_ATT_L56XMF	0x0440
-+#define PCI_DEVICE_ID_ATT_VENUS_MODEM	0x480
-+
-+#define PCI_VENDOR_ID_NEC2		0x11c3 /* NEC (2nd) */
-+
-+#define PCI_VENDOR_ID_SPECIALIX		0x11cb
-+#define PCI_DEVICE_ID_SPECIALIX_IO8	0x2000
-+#define PCI_DEVICE_ID_SPECIALIX_XIO	0x4000
-+#define PCI_DEVICE_ID_SPECIALIX_RIO	0x8000
-+#define PCI_SUBDEVICE_ID_SPECIALIX_SPEED4 0xa004
-+
-+#define PCI_VENDOR_ID_AURAVISION	0x11d1
-+#define PCI_DEVICE_ID_AURAVISION_VXP524	0x01f7
-+
-+#define PCI_VENDOR_ID_ANALOG_DEVICES	0x11d4
-+#define PCI_DEVICE_ID_AD1889JS		0x1889
-+
-+#define PCI_VENDOR_ID_IKON		0x11d5
-+#define PCI_DEVICE_ID_IKON_10115	0x0115
-+#define PCI_DEVICE_ID_IKON_10117	0x0117
-+
-+#define PCI_VENDOR_ID_SEGA		0x11db
-+#define PCI_DEVICE_ID_SEGA_BBA		0x1234
-+
-+#define PCI_VENDOR_ID_ZORAN		0x11de
-+#define PCI_DEVICE_ID_ZORAN_36057	0x6057
-+#define PCI_DEVICE_ID_ZORAN_36120	0x6120
-+
-+#define PCI_VENDOR_ID_KINETIC		0x11f4
-+#define PCI_DEVICE_ID_KINETIC_2915	0x2915
-+
-+#define PCI_VENDOR_ID_COMPEX		0x11f6
-+#define PCI_DEVICE_ID_COMPEX_ENET100VG4	0x0112
-+#define PCI_DEVICE_ID_COMPEX_RL2000	0x1401
-+
-+#define PCI_VENDOR_ID_RP		0x11fe
-+#define PCI_DEVICE_ID_RP32INTF		0x0001
-+#define PCI_DEVICE_ID_RP8INTF		0x0002
-+#define PCI_DEVICE_ID_RP16INTF		0x0003
-+#define PCI_DEVICE_ID_RP4QUAD		0x0004
-+#define PCI_DEVICE_ID_RP8OCTA		0x0005
-+#define PCI_DEVICE_ID_RP8J		0x0006
-+#define PCI_DEVICE_ID_RP4J		0x0007
-+#define PCI_DEVICE_ID_RP8SNI		0x0008	
-+#define PCI_DEVICE_ID_RP16SNI		0x0009	
-+#define PCI_DEVICE_ID_RPP4		0x000A
-+#define PCI_DEVICE_ID_RPP8		0x000B
-+#define PCI_DEVICE_ID_RP8M		0x000C
-+#define PCI_DEVICE_ID_RP4M		0x000D
-+#define PCI_DEVICE_ID_RP2_232		0x000E
-+#define PCI_DEVICE_ID_RP2_422		0x000F
-+#define PCI_DEVICE_ID_URP32INTF		0x0801
-+#define PCI_DEVICE_ID_URP8INTF		0x0802
-+#define PCI_DEVICE_ID_URP16INTF		0x0803
-+#define PCI_DEVICE_ID_URP8OCTA		0x0805
-+#define PCI_DEVICE_ID_UPCI_RM3_8PORT	0x080C       
-+#define PCI_DEVICE_ID_UPCI_RM3_4PORT	0x080D
-+#define PCI_DEVICE_ID_CRP16INTF		0x0903       
-+
-+#define PCI_VENDOR_ID_CYCLADES		0x120e
-+#define PCI_DEVICE_ID_CYCLOM_Y_Lo	0x0100
-+#define PCI_DEVICE_ID_CYCLOM_Y_Hi	0x0101
-+#define PCI_DEVICE_ID_CYCLOM_4Y_Lo	0x0102
-+#define PCI_DEVICE_ID_CYCLOM_4Y_Hi	0x0103
-+#define PCI_DEVICE_ID_CYCLOM_8Y_Lo	0x0104
-+#define PCI_DEVICE_ID_CYCLOM_8Y_Hi	0x0105
-+#define PCI_DEVICE_ID_CYCLOM_Z_Lo	0x0200
-+#define PCI_DEVICE_ID_CYCLOM_Z_Hi	0x0201
-+#define PCI_DEVICE_ID_PC300_RX_2	0x0300
-+#define PCI_DEVICE_ID_PC300_RX_1	0x0301
-+#define PCI_DEVICE_ID_PC300_TE_2	0x0310
-+#define PCI_DEVICE_ID_PC300_TE_1	0x0311
-+#define PCI_DEVICE_ID_PC300_TE_M_2	0x0320
-+#define PCI_DEVICE_ID_PC300_TE_M_1	0x0321
-+
-+/* Allied Telesyn */
-+#define PCI_VENDOR_ID_AT    		0x1259
-+#define PCI_SUBDEVICE_ID_AT_2701FX	0x2703
-+
-+#define PCI_VENDOR_ID_ESSENTIAL		0x120f
-+#define PCI_DEVICE_ID_ESSENTIAL_ROADRUNNER	0x0001
-+
-+#define PCI_VENDOR_ID_O2		0x1217
-+#define PCI_DEVICE_ID_O2_6729		0x6729
-+#define PCI_DEVICE_ID_O2_6730		0x673a
-+#define PCI_DEVICE_ID_O2_6832		0x6832
-+#define PCI_DEVICE_ID_O2_6836		0x6836
-+
-+#define PCI_VENDOR_ID_3DFX		0x121a
-+#define PCI_DEVICE_ID_3DFX_VOODOO	0x0001
-+#define PCI_DEVICE_ID_3DFX_VOODOO2	0x0002
-+#define PCI_DEVICE_ID_3DFX_BANSHEE	0x0003
-+#define PCI_DEVICE_ID_3DFX_VOODOO3	0x0005
-+#define PCI_DEVICE_ID_3DFX_VOODOO5	0x0009
-+
-+#define PCI_VENDOR_ID_SIGMADES		0x1236
-+#define PCI_DEVICE_ID_SIGMADES_6425	0x6401
-+
-+#define PCI_VENDOR_ID_CCUBE		0x123f
-+
-+#define PCI_VENDOR_ID_AVM		0x1244
-+#define PCI_DEVICE_ID_AVM_B1		0x0700
-+#define PCI_DEVICE_ID_AVM_C4		0x0800
-+#define PCI_DEVICE_ID_AVM_A1		0x0a00
-+#define PCI_DEVICE_ID_AVM_A1_V2		0x0e00
-+#define PCI_DEVICE_ID_AVM_C2		0x1100
-+#define PCI_DEVICE_ID_AVM_T1		0x1200
-+
-+#define PCI_VENDOR_ID_DIPIX		0x1246
-+
-+#define PCI_VENDOR_ID_STALLION		0x124d
-+#define PCI_DEVICE_ID_STALLION_ECHPCI832 0x0000
-+#define PCI_DEVICE_ID_STALLION_ECHPCI864 0x0002
-+#define PCI_DEVICE_ID_STALLION_EIOPCI	0x0003
-+
-+#define PCI_VENDOR_ID_OPTIBASE		0x1255
-+#define PCI_DEVICE_ID_OPTIBASE_FORGE	0x1110
-+#define PCI_DEVICE_ID_OPTIBASE_FUSION	0x1210
-+#define PCI_DEVICE_ID_OPTIBASE_VPLEX	0x2110
-+#define PCI_DEVICE_ID_OPTIBASE_VPLEXCC	0x2120
-+#define PCI_DEVICE_ID_OPTIBASE_VQUEST	0x2130
-+
-+/* Allied Telesyn */
-+#define PCI_VENDOR_ID_AT    		0x1259
-+#define PCI_SUBDEVICE_ID_AT_2700FX	0x2701
-+#define PCI_SUBDEVICE_ID_AT_2701FX	0x2703
-+
-+#define PCI_VENDOR_ID_ESS		0x125d
-+#define PCI_DEVICE_ID_ESS_ESS1968	0x1968
-+#define PCI_DEVICE_ID_ESS_AUDIOPCI	0x1969
-+#define PCI_DEVICE_ID_ESS_ESS1978	0x1978
-+
-+#define PCI_VENDOR_ID_SATSAGEM		0x1267
-+#define PCI_DEVICE_ID_SATSAGEM_NICCY	0x1016
-+#define PCI_DEVICE_ID_SATSAGEM_PCR2101	0x5352
-+#define PCI_DEVICE_ID_SATSAGEM_TELSATTURBO 0x5a4b
-+
-+#define PCI_VENDOR_ID_HUGHES		0x1273
-+#define PCI_DEVICE_ID_HUGHES_DIRECPC	0x0002
-+
-+#define PCI_VENDOR_ID_ENSONIQ		0x1274
-+#define PCI_DEVICE_ID_ENSONIQ_CT5880	0x5880
-+#define PCI_DEVICE_ID_ENSONIQ_ES1370	0x5000
-+#define PCI_DEVICE_ID_ENSONIQ_ES1371	0x1371
-+
-+#define PCI_VENDOR_ID_TRANSMETA		0x1279
-+#define PCI_DEVICE_ID_EFFICEON		0x0060
-+
-+#define PCI_VENDOR_ID_ROCKWELL		0x127A
-+
-+#define PCI_VENDOR_ID_ITE		0x1283
-+#define PCI_DEVICE_ID_ITE_IT8172G	0x8172
-+#define PCI_DEVICE_ID_ITE_IT8172G_AUDIO 0x0801
-+#define PCI_DEVICE_ID_ITE_8872		0x8872
-+#define PCI_DEVICE_ID_ITE_IT8330G_0	0xe886
-+
-+/* formerly Platform Tech */
-+#define PCI_VENDOR_ID_ESS_OLD		0x1285
-+#define PCI_DEVICE_ID_ESS_ESS0100	0x0100
-+
-+#define PCI_VENDOR_ID_ALTEON		0x12ae
-+#define PCI_DEVICE_ID_ALTEON_ACENIC	0x0001
-+
-+#define PCI_VENDOR_ID_USR		0x12B9
-+
-+#define PCI_SUBVENDOR_ID_CONNECT_TECH			0x12c4
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_232		0x0001
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_232		0x0002
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_232		0x0003
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485		0x0004
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_4_4	0x0005
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485		0x0006
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH4_485_2_2	0x0007
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH2_485		0x0008
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH8_485_2_6	0x0009
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH081101V1	0x000A
-+#define PCI_SUBDEVICE_ID_CONNECT_TECH_BH041101V1	0x000B
-+
-+#define PCI_VENDOR_ID_PICTUREL		0x12c5
-+#define PCI_DEVICE_ID_PICTUREL_PCIVST	0x0081
-+
-+#define PCI_VENDOR_ID_NVIDIA_SGS	0x12d2
-+#define PCI_DEVICE_ID_NVIDIA_SGS_RIVA128 0x0018
-+
-+#define PCI_SUBVENDOR_ID_CHASE_PCIFAST		0x12E0
-+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST4		0x0031
-+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST8		0x0021
-+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16	0x0011
-+#define PCI_SUBDEVICE_ID_CHASE_PCIFAST16FMC	0x0041
-+#define PCI_SUBVENDOR_ID_CHASE_PCIRAS		0x124D
-+#define PCI_SUBDEVICE_ID_CHASE_PCIRAS4		0xF001
-+#define PCI_SUBDEVICE_ID_CHASE_PCIRAS8		0xF010
-+
-+#define PCI_VENDOR_ID_AUREAL		0x12eb
-+#define PCI_DEVICE_ID_AUREAL_VORTEX_1	0x0001
-+#define PCI_DEVICE_ID_AUREAL_VORTEX_2	0x0002
-+#define PCI_DEVICE_ID_AUREAL_ADVANTAGE	0x0003
-+
-+#define PCI_VENDOR_ID_ELECTRONICDESIGNGMBH 0x12f8
-+#define PCI_DEVICE_ID_LML_33R10		0x8a02
-+
-+#define PCI_VENDOR_ID_CBOARDS		0x1307
-+#define PCI_DEVICE_ID_CBOARDS_DAS1602_16 0x0001
-+
-+#define PCI_VENDOR_ID_SIIG		0x131f
-+#define PCI_DEVICE_ID_SIIG_1S_10x_550	0x1000
-+#define PCI_DEVICE_ID_SIIG_1S_10x_650	0x1001
-+#define PCI_DEVICE_ID_SIIG_1S_10x_850	0x1002
-+#define PCI_DEVICE_ID_SIIG_1S1P_10x_550	0x1010
-+#define PCI_DEVICE_ID_SIIG_1S1P_10x_650	0x1011
-+#define PCI_DEVICE_ID_SIIG_1S1P_10x_850	0x1012
-+#define PCI_DEVICE_ID_SIIG_1P_10x	0x1020
-+#define PCI_DEVICE_ID_SIIG_2P_10x	0x1021
-+#define PCI_DEVICE_ID_SIIG_2S_10x_550	0x1030
-+#define PCI_DEVICE_ID_SIIG_2S_10x_650	0x1031
-+#define PCI_DEVICE_ID_SIIG_2S_10x_850	0x1032
-+#define PCI_DEVICE_ID_SIIG_2S1P_10x_550	0x1034
-+#define PCI_DEVICE_ID_SIIG_2S1P_10x_650	0x1035
-+#define PCI_DEVICE_ID_SIIG_2S1P_10x_850	0x1036
-+#define PCI_DEVICE_ID_SIIG_4S_10x_550	0x1050
-+#define PCI_DEVICE_ID_SIIG_4S_10x_650	0x1051
-+#define PCI_DEVICE_ID_SIIG_4S_10x_850	0x1052
-+#define PCI_DEVICE_ID_SIIG_1S_20x_550	0x2000
-+#define PCI_DEVICE_ID_SIIG_1S_20x_650	0x2001
-+#define PCI_DEVICE_ID_SIIG_1S_20x_850	0x2002
-+#define PCI_DEVICE_ID_SIIG_1P_20x	0x2020
-+#define PCI_DEVICE_ID_SIIG_2P_20x	0x2021
-+#define PCI_DEVICE_ID_SIIG_2S_20x_550	0x2030
-+#define PCI_DEVICE_ID_SIIG_2S_20x_650	0x2031
-+#define PCI_DEVICE_ID_SIIG_2S_20x_850	0x2032
-+#define PCI_DEVICE_ID_SIIG_2P1S_20x_550	0x2040
-+#define PCI_DEVICE_ID_SIIG_2P1S_20x_650	0x2041
-+#define PCI_DEVICE_ID_SIIG_2P1S_20x_850	0x2042
-+#define PCI_DEVICE_ID_SIIG_1S1P_20x_550	0x2010
-+#define PCI_DEVICE_ID_SIIG_1S1P_20x_650	0x2011
-+#define PCI_DEVICE_ID_SIIG_1S1P_20x_850	0x2012
-+#define PCI_DEVICE_ID_SIIG_4S_20x_550	0x2050
-+#define PCI_DEVICE_ID_SIIG_4S_20x_650	0x2051
-+#define PCI_DEVICE_ID_SIIG_4S_20x_850	0x2052
-+#define PCI_DEVICE_ID_SIIG_2S1P_20x_550	0x2060
-+#define PCI_DEVICE_ID_SIIG_2S1P_20x_650	0x2061
-+#define PCI_DEVICE_ID_SIIG_2S1P_20x_850	0x2062
-+
-+#define PCI_VENDOR_ID_RADISYS		0x1331
-+#define PCI_DEVICE_ID_RADISYS_ENP2611	0x0030
-+
-+#define PCI_VENDOR_ID_DOMEX		0x134a
-+#define PCI_DEVICE_ID_DOMEX_DMX3191D	0x0001
-+
-+#define PCI_VENDOR_ID_QUATECH		0x135C
-+#define PCI_DEVICE_ID_QUATECH_QSC100	0x0010
-+#define PCI_DEVICE_ID_QUATECH_DSC100	0x0020
-+#define PCI_DEVICE_ID_QUATECH_DSC200	0x0030
-+#define PCI_DEVICE_ID_QUATECH_QSC200	0x0040
-+#define PCI_DEVICE_ID_QUATECH_ESC100D	0x0050
-+#define PCI_DEVICE_ID_QUATECH_ESC100M	0x0060
-+
-+#define PCI_VENDOR_ID_SEALEVEL		0x135e
-+#define PCI_DEVICE_ID_SEALEVEL_U530	0x7101
-+#define PCI_DEVICE_ID_SEALEVEL_UCOMM2	0x7201
-+#define PCI_DEVICE_ID_SEALEVEL_UCOMM422	0x7402
-+#define PCI_DEVICE_ID_SEALEVEL_UCOMM232	0x7202
-+#define PCI_DEVICE_ID_SEALEVEL_COMM4	0x7401
-+#define PCI_DEVICE_ID_SEALEVEL_COMM8	0x7801
-+#define PCI_DEVICE_ID_SEALEVEL_UCOMM8	0x7804
-+
-+#define PCI_VENDOR_ID_HYPERCOPE		0x1365
-+#define PCI_DEVICE_ID_HYPERCOPE_PLX	0x9050
-+#define PCI_SUBDEVICE_ID_HYPERCOPE_OLD_ERGO	0x0104
-+#define PCI_SUBDEVICE_ID_HYPERCOPE_ERGO		0x0106
-+#define PCI_SUBDEVICE_ID_HYPERCOPE_METRO	0x0107
-+#define PCI_SUBDEVICE_ID_HYPERCOPE_CHAMP2	0x0108
-+#define PCI_SUBDEVICE_ID_HYPERCOPE_PLEXUS	0x0109
-+
-+#define PCI_VENDOR_ID_KAWASAKI		0x136b
-+#define PCI_DEVICE_ID_MCHIP_KL5A72002	0xff01
-+
-+#define PCI_VENDOR_ID_CNET		0x1371
-+#define PCI_DEVICE_ID_CNET_GIGACARD	0x434e
-+
-+#define PCI_VENDOR_ID_LMC		0x1376
-+#define PCI_DEVICE_ID_LMC_HSSI		0x0003
-+#define PCI_DEVICE_ID_LMC_DS3		0x0004
-+#define PCI_DEVICE_ID_LMC_SSI		0x0005
-+#define PCI_DEVICE_ID_LMC_T1		0x0006
-+
-+#define PCI_VENDOR_ID_NETGEAR		0x1385
-+#define PCI_DEVICE_ID_NETGEAR_GA620	0x620a
-+#define PCI_DEVICE_ID_NETGEAR_GA622	0x622a
-+
-+#define PCI_VENDOR_ID_APPLICOM		0x1389
-+#define PCI_DEVICE_ID_APPLICOM_PCIGENERIC 0x0001
-+#define PCI_DEVICE_ID_APPLICOM_PCI2000IBS_CAN 0x0002
-+#define PCI_DEVICE_ID_APPLICOM_PCI2000PFB 0x0003
-+
-+#define PCI_VENDOR_ID_MOXA		0x1393
-+#define PCI_DEVICE_ID_MOXA_RC7000	0x0001
-+#define PCI_DEVICE_ID_MOXA_CP102	0x1020
-+#define PCI_DEVICE_ID_MOXA_CP102UL	0x1021
-+#define PCI_DEVICE_ID_MOXA_CP102U	0x1022
-+#define PCI_DEVICE_ID_MOXA_C104		0x1040
-+#define PCI_DEVICE_ID_MOXA_CP104U	0x1041
-+#define PCI_DEVICE_ID_MOXA_CP104JU	0x1042
-+#define PCI_DEVICE_ID_MOXA_CT114	0x1140
-+#define PCI_DEVICE_ID_MOXA_CP114	0x1141
-+#define PCI_DEVICE_ID_MOXA_CP118U	0x1180
-+#define PCI_DEVICE_ID_MOXA_CP132	0x1320
-+#define PCI_DEVICE_ID_MOXA_CP132U	0x1321
-+#define PCI_DEVICE_ID_MOXA_CP134U	0x1340
-+#define PCI_DEVICE_ID_MOXA_C168		0x1680
-+#define PCI_DEVICE_ID_MOXA_CP168U	0x1681
-+#define PCI_DEVICE_ID_MOXA_CP204J	0x2040
-+#define PCI_DEVICE_ID_MOXA_C218		0x2180
-+#define PCI_DEVICE_ID_MOXA_C320		0x3200
-+
-+#define PCI_VENDOR_ID_CCD		0x1397
-+#define PCI_DEVICE_ID_CCD_2BD0		0x2bd0
-+#define PCI_DEVICE_ID_CCD_B000		0xb000
-+#define PCI_DEVICE_ID_CCD_B006		0xb006
-+#define PCI_DEVICE_ID_CCD_B007		0xb007
-+#define PCI_DEVICE_ID_CCD_B008		0xb008
-+#define PCI_DEVICE_ID_CCD_B009		0xb009
-+#define PCI_DEVICE_ID_CCD_B00A		0xb00a
-+#define PCI_DEVICE_ID_CCD_B00B		0xb00b
-+#define PCI_DEVICE_ID_CCD_B00C		0xb00c
-+#define PCI_DEVICE_ID_CCD_B100		0xb100
-+
-+#define PCI_VENDOR_ID_EXAR		0x13a8
-+#define PCI_DEVICE_ID_EXAR_XR17C152	0x0152
-+#define PCI_DEVICE_ID_EXAR_XR17C154	0x0154
-+#define PCI_DEVICE_ID_EXAR_XR17C158	0x0158
-+
-+#define PCI_VENDOR_ID_MICROGATE		0x13c0
-+#define PCI_DEVICE_ID_MICROGATE_USC	0x0010
-+#define PCI_DEVICE_ID_MICROGATE_SCC	0x0020
-+#define PCI_DEVICE_ID_MICROGATE_SCA	0x0030
-+#define PCI_DEVICE_ID_MICROGATE_USC2	0x0210
-+
-+#define PCI_VENDOR_ID_3WARE		0x13C1
-+#define PCI_DEVICE_ID_3WARE_1000	0x1000
-+#define PCI_DEVICE_ID_3WARE_7000	0x1001
-+#define PCI_DEVICE_ID_3WARE_9000	0x1002
-+
-+#define PCI_VENDOR_ID_IOMEGA		0x13ca
-+#define PCI_DEVICE_ID_IOMEGA_BUZ	0x4231
-+
-+#define PCI_VENDOR_ID_ABOCOM		0x13D1
-+#define PCI_DEVICE_ID_ABOCOM_2BD1       0x2BD1
-+
-+#define PCI_VENDOR_ID_CMEDIA		0x13f6
-+#define PCI_DEVICE_ID_CMEDIA_CM8338A	0x0100
-+#define PCI_DEVICE_ID_CMEDIA_CM8338B	0x0101
-+#define PCI_DEVICE_ID_CMEDIA_CM8738	0x0111
-+#define PCI_DEVICE_ID_CMEDIA_CM8738B	0x0112
-+
-+#define PCI_VENDOR_ID_LAVA		0x1407
-+#define PCI_DEVICE_ID_LAVA_DSERIAL	0x0100 /* 2x 16550 */
-+#define PCI_DEVICE_ID_LAVA_QUATRO_A	0x0101 /* 2x 16550, half of 4 port */
-+#define PCI_DEVICE_ID_LAVA_QUATRO_B	0x0102 /* 2x 16550, half of 4 port */
-+#define PCI_DEVICE_ID_LAVA_OCTO_A	0x0180 /* 4x 16550A, half of 8 port */
-+#define PCI_DEVICE_ID_LAVA_OCTO_B	0x0181 /* 4x 16550A, half of 8 port */
-+#define PCI_DEVICE_ID_LAVA_PORT_PLUS	0x0200 /* 2x 16650 */
-+#define PCI_DEVICE_ID_LAVA_QUAD_A	0x0201 /* 2x 16650, half of 4 port */
-+#define PCI_DEVICE_ID_LAVA_QUAD_B	0x0202 /* 2x 16650, half of 4 port */
-+#define PCI_DEVICE_ID_LAVA_SSERIAL	0x0500 /* 1x 16550 */
-+#define PCI_DEVICE_ID_LAVA_PORT_650	0x0600 /* 1x 16650 */
-+#define PCI_DEVICE_ID_LAVA_PARALLEL	0x8000
-+#define PCI_DEVICE_ID_LAVA_DUAL_PAR_A	0x8002 /* The Lava Dual Parallel is */
-+#define PCI_DEVICE_ID_LAVA_DUAL_PAR_B	0x8003 /* two PCI devices on a card */
-+#define PCI_DEVICE_ID_LAVA_BOCA_IOPPAR	0x8800
-+
-+#define PCI_VENDOR_ID_TIMEDIA		0x1409
-+#define PCI_DEVICE_ID_TIMEDIA_1889	0x7168
-+
-+#define PCI_VENDOR_ID_OXSEMI		0x1415
-+#define PCI_DEVICE_ID_OXSEMI_12PCI840	0x8403
-+#define PCI_DEVICE_ID_OXSEMI_16PCI954	0x9501
-+#define PCI_DEVICE_ID_OXSEMI_16PCI95N	0x9511
-+#define PCI_DEVICE_ID_OXSEMI_16PCI954PP	0x9513
-+#define PCI_DEVICE_ID_OXSEMI_16PCI952	0x9521
-+
-+#define PCI_VENDOR_ID_SAMSUNG		0x144d
-+
-+#define PCI_VENDOR_ID_AIRONET		0x14b9
-+#define PCI_DEVICE_ID_AIRONET_4800_1	0x0001
-+#define PCI_DEVICE_ID_AIRONET_4800	0x4500 // values switched?  see
-+#define PCI_DEVICE_ID_AIRONET_4500	0x4800 // drivers/net/aironet4500_card.c
-+
-+#define PCI_VENDOR_ID_TITAN		0x14D2
-+#define PCI_DEVICE_ID_TITAN_010L	0x8001
-+#define PCI_DEVICE_ID_TITAN_100L	0x8010
-+#define PCI_DEVICE_ID_TITAN_110L	0x8011
-+#define PCI_DEVICE_ID_TITAN_200L	0x8020
-+#define PCI_DEVICE_ID_TITAN_210L	0x8021
-+#define PCI_DEVICE_ID_TITAN_400L	0x8040
-+#define PCI_DEVICE_ID_TITAN_800L	0x8080
-+#define PCI_DEVICE_ID_TITAN_100		0xA001
-+#define PCI_DEVICE_ID_TITAN_200		0xA005
-+#define PCI_DEVICE_ID_TITAN_400		0xA003
-+#define PCI_DEVICE_ID_TITAN_800B	0xA004
-+
-+#define PCI_VENDOR_ID_PANACOM		0x14d4
-+#define PCI_DEVICE_ID_PANACOM_QUADMODEM	0x0400
-+#define PCI_DEVICE_ID_PANACOM_DUALMODEM	0x0402
-+
-+#define PCI_VENDOR_ID_SIPACKETS		0x14d9
-+#define PCI_DEVICE_ID_SP_HT		0x0010
-+
-+#define PCI_VENDOR_ID_AFAVLAB		0x14db
-+#define PCI_DEVICE_ID_AFAVLAB_P028	0x2180
-+#define PCI_DEVICE_ID_AFAVLAB_P030	0x2182
-+
-+#define PCI_VENDOR_ID_BROADCOM		0x14e4
-+#define PCI_DEVICE_ID_TIGON3_5752	0x1600
-+#define PCI_DEVICE_ID_TIGON3_5752M	0x1601
-+#define PCI_DEVICE_ID_TIGON3_5700	0x1644
-+#define PCI_DEVICE_ID_TIGON3_5701	0x1645
-+#define PCI_DEVICE_ID_TIGON3_5702	0x1646
-+#define PCI_DEVICE_ID_TIGON3_5703	0x1647
-+#define PCI_DEVICE_ID_TIGON3_5704	0x1648
-+#define PCI_DEVICE_ID_TIGON3_5704S_2	0x1649
-+#define PCI_DEVICE_ID_NX2_5706		0x164a
-+#define PCI_DEVICE_ID_TIGON3_5702FE	0x164d
-+#define PCI_DEVICE_ID_TIGON3_5705	0x1653
-+#define PCI_DEVICE_ID_TIGON3_5705_2	0x1654
-+#define PCI_DEVICE_ID_TIGON3_5720	0x1658
-+#define PCI_DEVICE_ID_TIGON3_5721	0x1659
-+#define PCI_DEVICE_ID_TIGON3_5705M	0x165d
-+#define PCI_DEVICE_ID_TIGON3_5705M_2	0x165e
-+#define PCI_DEVICE_ID_TIGON3_5705F	0x166e
-+#define PCI_DEVICE_ID_TIGON3_5750	0x1676
-+#define PCI_DEVICE_ID_TIGON3_5751	0x1677
-+#define PCI_DEVICE_ID_TIGON3_5750M	0x167c
-+#define PCI_DEVICE_ID_TIGON3_5751M	0x167d
-+#define PCI_DEVICE_ID_TIGON3_5751F	0x167e
-+#define PCI_DEVICE_ID_TIGON3_5782	0x1696
-+#define PCI_DEVICE_ID_TIGON3_5788	0x169c
-+#define PCI_DEVICE_ID_TIGON3_5789	0x169d
-+#define PCI_DEVICE_ID_TIGON3_5702X	0x16a6
-+#define PCI_DEVICE_ID_TIGON3_5703X	0x16a7
-+#define PCI_DEVICE_ID_TIGON3_5704S	0x16a8
-+#define PCI_DEVICE_ID_NX2_5706S		0x16aa
-+#define PCI_DEVICE_ID_TIGON3_5702A3	0x16c6
-+#define PCI_DEVICE_ID_TIGON3_5703A3	0x16c7
-+#define PCI_DEVICE_ID_TIGON3_5781	0x16dd
-+#define PCI_DEVICE_ID_TIGON3_5753	0x16f7
-+#define PCI_DEVICE_ID_TIGON3_5753M	0x16fd
-+#define PCI_DEVICE_ID_TIGON3_5753F	0x16fe
-+#define PCI_DEVICE_ID_TIGON3_5901	0x170d
-+#define PCI_DEVICE_ID_BCM4401B1		0x170c
-+#define PCI_DEVICE_ID_TIGON3_5901_2	0x170e
-+#define PCI_DEVICE_ID_BCM4401		0x4401
-+#define PCI_DEVICE_ID_BCM4401B0		0x4402
-+
-+#define PCI_VENDOR_ID_TOPIC		0x151f
-+#define PCI_DEVICE_ID_TOPIC_TP560	0x0000
-+
-+#define PCI_VENDOR_ID_ENE		0x1524
-+#define PCI_DEVICE_ID_ENE_1211		0x1211
-+#define PCI_DEVICE_ID_ENE_1225		0x1225
-+#define PCI_DEVICE_ID_ENE_1410		0x1410
-+#define PCI_DEVICE_ID_ENE_1420		0x1420
-+
-+#define PCI_VENDOR_ID_SYBA		0x1592
-+#define PCI_DEVICE_ID_SYBA_2P_EPP	0x0782
-+#define PCI_DEVICE_ID_SYBA_1P_ECP	0x0783
-+
-+#define PCI_VENDOR_ID_MORETON		0x15aa
-+#define PCI_DEVICE_ID_RASTEL_2PORT	0x2000
-+
-+#define PCI_VENDOR_ID_ZOLTRIX		0x15b0
-+#define PCI_DEVICE_ID_ZOLTRIX_2BD0	0x2bd0 
-+
-+#define PCI_VENDOR_ID_MELLANOX		0x15b3
-+#define PCI_DEVICE_ID_MELLANOX_TAVOR	0x5a44
-+#define PCI_DEVICE_ID_MELLANOX_ARBEL_COMPAT 0x6278
-+#define PCI_DEVICE_ID_MELLANOX_ARBEL	0x6282
-+#define PCI_DEVICE_ID_MELLANOX_SINAI_OLD 0x5e8c
-+#define PCI_DEVICE_ID_MELLANOX_SINAI	0x6274
-+
-+#define PCI_VENDOR_ID_PDC		0x15e9
-+#define PCI_DEVICE_ID_PDC_1841		0x1841
-+
-+#define PCI_VENDOR_ID_MACROLINK		0x15ed
-+#define PCI_DEVICE_ID_MACROLINK_MCCS8	0x1000
-+#define PCI_DEVICE_ID_MACROLINK_MCCS	0x1001
-+#define PCI_DEVICE_ID_MACROLINK_MCCS8H	0x1002
-+#define PCI_DEVICE_ID_MACROLINK_MCCSH	0x1003
-+#define PCI_DEVICE_ID_MACROLINK_MCCR8	0x2000
-+#define PCI_DEVICE_ID_MACROLINK_MCCR	0x2001
-+
-+#define PCI_VENDOR_ID_FARSITE           0x1619
-+#define PCI_DEVICE_ID_FARSITE_T2P       0x0400
-+#define PCI_DEVICE_ID_FARSITE_T4P       0x0440
-+#define PCI_DEVICE_ID_FARSITE_T1U       0x0610
-+#define PCI_DEVICE_ID_FARSITE_T2U       0x0620
-+#define PCI_DEVICE_ID_FARSITE_T4U       0x0640
-+#define PCI_DEVICE_ID_FARSITE_TE1       0x1610
-+#define PCI_DEVICE_ID_FARSITE_TE1C      0x1612
-+
-+#define PCI_VENDOR_ID_SIBYTE		0x166d
-+#define PCI_DEVICE_ID_BCM1250_HT	0x0002
-+
-+#define PCI_VENDOR_ID_LINKSYS		0x1737
-+#define PCI_DEVICE_ID_LINKSYS_EG1032	0x1032
-+#define PCI_DEVICE_ID_LINKSYS_EG1064	0x1064
-+
-+#define PCI_VENDOR_ID_ALTIMA		0x173b
-+#define PCI_DEVICE_ID_ALTIMA_AC1000	0x03e8
-+#define PCI_DEVICE_ID_ALTIMA_AC1001	0x03e9
-+#define PCI_DEVICE_ID_ALTIMA_AC9100	0x03ea
-+#define PCI_DEVICE_ID_ALTIMA_AC1003	0x03eb
-+
-+#define PCI_VENDOR_ID_S2IO		0x17d5
-+#define	PCI_DEVICE_ID_S2IO_WIN		0x5731
-+#define	PCI_DEVICE_ID_S2IO_UNI		0x5831
-+#define PCI_DEVICE_ID_HERC_WIN		0x5732
-+#define PCI_DEVICE_ID_HERC_UNI		0x5832
-+
-+#define PCI_VENDOR_ID_INFINICON		0x1820
-+
-+#define PCI_VENDOR_ID_TOPSPIN		0x1867
-+
-+#define PCI_VENDOR_ID_TDI               0x192E
-+#define PCI_DEVICE_ID_TDI_EHCI          0x0101
-+
-+#define PCI_VENDOR_ID_SYMPHONY		0x1c1c
-+#define PCI_DEVICE_ID_SYMPHONY_101	0x0001
-+
-+#define PCI_VENDOR_ID_TEKRAM		0x1de1
-+#define PCI_DEVICE_ID_TEKRAM_DC290	0xdc29
-+
-+#define PCI_VENDOR_ID_HINT             0x3388
-+#define PCI_DEVICE_ID_HINT_VXPROII_IDE 0x8013
-+
-+#define PCI_VENDOR_ID_3DLABS		0x3d3d
-+#define PCI_DEVICE_ID_3DLABS_300SX	0x0001
-+#define PCI_DEVICE_ID_3DLABS_500TX	0x0002
-+#define PCI_DEVICE_ID_3DLABS_DELTA	0x0003
-+#define PCI_DEVICE_ID_3DLABS_PERMEDIA	0x0004
-+#define PCI_DEVICE_ID_3DLABS_MX		0x0006
-+#define PCI_DEVICE_ID_3DLABS_PERMEDIA2	0x0007
-+#define PCI_DEVICE_ID_3DLABS_GAMMA	0x0008
-+#define PCI_DEVICE_ID_3DLABS_PERMEDIA2V	0x0009
-+
-+#define PCI_VENDOR_ID_AVANCE		0x4005
-+#define PCI_DEVICE_ID_AVANCE_ALG2064	0x2064
-+#define PCI_DEVICE_ID_AVANCE_2302	0x2302
-+
-+#define PCI_VENDOR_ID_AKS		0x416c
-+#define PCI_DEVICE_ID_AKS_ALADDINCARD	0x0100
-+#define PCI_DEVICE_ID_AKS_CPC		0x0200
-+
-+#define PCI_VENDOR_ID_REDCREEK		0x4916
-+#define PCI_DEVICE_ID_RC45		0x1960
-+
-+#define PCI_VENDOR_ID_NETVIN		0x4a14
-+#define PCI_DEVICE_ID_NETVIN_NV5000SC	0x5000
-+
-+#define PCI_VENDOR_ID_S3		0x5333
-+#define PCI_DEVICE_ID_S3_PLATO_PXS	0x0551
-+#define PCI_DEVICE_ID_S3_ViRGE		0x5631
-+#define PCI_DEVICE_ID_S3_TRIO		0x8811
-+#define PCI_DEVICE_ID_S3_AURORA64VP	0x8812
-+#define PCI_DEVICE_ID_S3_TRIO64UVP	0x8814
-+#define PCI_DEVICE_ID_S3_ViRGE_VX	0x883d
-+#define PCI_DEVICE_ID_S3_868		0x8880
-+#define PCI_DEVICE_ID_S3_928		0x88b0
-+#define PCI_DEVICE_ID_S3_864_1		0x88c0
-+#define PCI_DEVICE_ID_S3_864_2		0x88c1
-+#define PCI_DEVICE_ID_S3_964_1		0x88d0
-+#define PCI_DEVICE_ID_S3_964_2		0x88d1
-+#define PCI_DEVICE_ID_S3_968		0x88f0
-+#define PCI_DEVICE_ID_S3_TRIO64V2	0x8901
-+#define PCI_DEVICE_ID_S3_PLATO_PXG	0x8902
-+#define PCI_DEVICE_ID_S3_ViRGE_DXGX	0x8a01
-+#define PCI_DEVICE_ID_S3_ViRGE_GX2	0x8a10
-+#define PCI_DEVICE_ID_S3_SAVAGE4	0x8a25
-+#define PCI_DEVICE_ID_S3_ViRGE_MX	0x8c01
-+#define PCI_DEVICE_ID_S3_ViRGE_MXP	0x8c02
-+#define PCI_DEVICE_ID_S3_ViRGE_MXPMV	0x8c03
-+#define PCI_DEVICE_ID_S3_PROSAVAGE8	0x8d04
-+#define PCI_DEVICE_ID_S3_SONICVIBES	0xca00
-+
-+#define PCI_VENDOR_ID_DUNORD		0x5544
-+#define PCI_DEVICE_ID_DUNORD_I3000	0x0001
-+
-+#define PCI_VENDOR_ID_DCI		0x6666
-+#define PCI_DEVICE_ID_DCI_PCCOM4	0x0001
-+#define PCI_DEVICE_ID_DCI_PCCOM8	0x0002
-+
-+#define PCI_VENDOR_ID_DUNORD		0x5544
-+#define PCI_DEVICE_ID_DUNORD_I3000	0x0001
-+
-+#define PCI_VENDOR_ID_GENROCO		0x5555
-+#define PCI_DEVICE_ID_GENROCO_HFP832	0x0003
-+
-+#define PCI_VENDOR_ID_INTEL		0x8086
-+#define PCI_DEVICE_ID_INTEL_EESSC	0x0008
-+#define PCI_DEVICE_ID_INTEL_21145	0x0039
-+#define PCI_DEVICE_ID_INTEL_82375	0x0482
-+#define PCI_DEVICE_ID_INTEL_82424	0x0483
-+#define PCI_DEVICE_ID_INTEL_82378	0x0484
-+#define PCI_DEVICE_ID_INTEL_82430	0x0486
-+#define PCI_DEVICE_ID_INTEL_82434	0x04a3
-+#define PCI_DEVICE_ID_INTEL_I960	0x0960
-+#define PCI_DEVICE_ID_INTEL_I960RM	0x0962
-+#define PCI_DEVICE_ID_INTEL_82562ET	0x1031
-+#define PCI_DEVICE_ID_INTEL_82801CAM	0x1038
-+#define PCI_DEVICE_ID_INTEL_82815_MC	0x1130
-+#define PCI_DEVICE_ID_INTEL_82815_AB	0x1131
-+#define PCI_DEVICE_ID_INTEL_82815_CGC	0x1132
-+#define PCI_DEVICE_ID_INTEL_82559ER	0x1209
-+#define PCI_DEVICE_ID_INTEL_82092AA_0	0x1221
-+#define PCI_DEVICE_ID_INTEL_82092AA_1	0x1222
-+#define PCI_DEVICE_ID_INTEL_7116	0x1223
-+#define PCI_DEVICE_ID_INTEL_7505_0	0x2550  
-+#define PCI_DEVICE_ID_INTEL_7505_1	0x2552  
-+#define PCI_DEVICE_ID_INTEL_7205_0	0x255d
-+#define PCI_DEVICE_ID_INTEL_82596	0x1226
-+#define PCI_DEVICE_ID_INTEL_82865	0x1227
-+#define PCI_DEVICE_ID_INTEL_82557	0x1229
-+#define PCI_DEVICE_ID_INTEL_82437	0x122d
-+#define PCI_DEVICE_ID_INTEL_82371FB_0	0x122e
-+#define PCI_DEVICE_ID_INTEL_82371FB_1	0x1230
-+#define PCI_DEVICE_ID_INTEL_82371MX	0x1234
-+#define PCI_DEVICE_ID_INTEL_82437MX	0x1235
-+#define PCI_DEVICE_ID_INTEL_82441	0x1237
-+#define PCI_DEVICE_ID_INTEL_82380FB	0x124b
-+#define PCI_DEVICE_ID_INTEL_82439	0x1250
-+#define PCI_DEVICE_ID_INTEL_80960_RP	0x1960
-+#define PCI_DEVICE_ID_INTEL_82840_HB	0x1a21
-+#define PCI_DEVICE_ID_INTEL_82845_HB	0x1a30
-+#define PCI_DEVICE_ID_INTEL_82801AA_0	0x2410
-+#define PCI_DEVICE_ID_INTEL_82801AA_1	0x2411
-+#define PCI_DEVICE_ID_INTEL_82801AA_2	0x2412
-+#define PCI_DEVICE_ID_INTEL_82801AA_3	0x2413
-+#define PCI_DEVICE_ID_INTEL_82801AA_5	0x2415
-+#define PCI_DEVICE_ID_INTEL_82801AA_6	0x2416
-+#define PCI_DEVICE_ID_INTEL_82801AA_8	0x2418
-+#define PCI_DEVICE_ID_INTEL_82801AB_0	0x2420
-+#define PCI_DEVICE_ID_INTEL_82801AB_1	0x2421
-+#define PCI_DEVICE_ID_INTEL_82801AB_2	0x2422
-+#define PCI_DEVICE_ID_INTEL_82801AB_3	0x2423
-+#define PCI_DEVICE_ID_INTEL_82801AB_5	0x2425
-+#define PCI_DEVICE_ID_INTEL_82801AB_6	0x2426
-+#define PCI_DEVICE_ID_INTEL_82801AB_8	0x2428
-+#define PCI_DEVICE_ID_INTEL_82801BA_0	0x2440
-+#define PCI_DEVICE_ID_INTEL_82801BA_1	0x2442
-+#define PCI_DEVICE_ID_INTEL_82801BA_2	0x2443
-+#define PCI_DEVICE_ID_INTEL_82801BA_3	0x2444
-+#define PCI_DEVICE_ID_INTEL_82801BA_4	0x2445
-+#define PCI_DEVICE_ID_INTEL_82801BA_5	0x2446
-+#define PCI_DEVICE_ID_INTEL_82801BA_6	0x2448
-+#define PCI_DEVICE_ID_INTEL_82801BA_7	0x2449
-+#define PCI_DEVICE_ID_INTEL_82801BA_8	0x244a
-+#define PCI_DEVICE_ID_INTEL_82801BA_9	0x244b
-+#define PCI_DEVICE_ID_INTEL_82801BA_10	0x244c
-+#define PCI_DEVICE_ID_INTEL_82801BA_11	0x244e
-+#define PCI_DEVICE_ID_INTEL_82801E_0	0x2450
-+#define PCI_DEVICE_ID_INTEL_82801E_2	0x2452
-+#define PCI_DEVICE_ID_INTEL_82801E_3	0x2453
-+#define PCI_DEVICE_ID_INTEL_82801E_9	0x2459
-+#define PCI_DEVICE_ID_INTEL_82801E_11	0x245b
-+#define PCI_DEVICE_ID_INTEL_82801E_13	0x245d
-+#define PCI_DEVICE_ID_INTEL_82801E_14	0x245e
-+#define PCI_DEVICE_ID_INTEL_82801CA_0	0x2480
-+#define PCI_DEVICE_ID_INTEL_82801CA_2	0x2482
-+#define PCI_DEVICE_ID_INTEL_82801CA_3	0x2483
-+#define PCI_DEVICE_ID_INTEL_82801CA_4	0x2484
-+#define PCI_DEVICE_ID_INTEL_82801CA_5	0x2485
-+#define PCI_DEVICE_ID_INTEL_82801CA_6	0x2486
-+#define PCI_DEVICE_ID_INTEL_82801CA_7	0x2487
-+#define PCI_DEVICE_ID_INTEL_82801CA_10	0x248a
-+#define PCI_DEVICE_ID_INTEL_82801CA_11	0x248b
-+#define PCI_DEVICE_ID_INTEL_82801CA_12	0x248c
-+#define PCI_DEVICE_ID_INTEL_82801DB_0	0x24c0
-+#define PCI_DEVICE_ID_INTEL_82801DB_1	0x24c1
-+#define PCI_DEVICE_ID_INTEL_82801DB_2	0x24c2
-+#define PCI_DEVICE_ID_INTEL_82801DB_3	0x24c3
-+#define PCI_DEVICE_ID_INTEL_82801DB_4	0x24c4
-+#define PCI_DEVICE_ID_INTEL_82801DB_5	0x24c5
-+#define PCI_DEVICE_ID_INTEL_82801DB_6	0x24c6
-+#define PCI_DEVICE_ID_INTEL_82801DB_7	0x24c7
-+#define PCI_DEVICE_ID_INTEL_82801DB_9	0x24c9
-+#define PCI_DEVICE_ID_INTEL_82801DB_10	0x24ca
-+#define PCI_DEVICE_ID_INTEL_82801DB_11	0x24cb
-+#define PCI_DEVICE_ID_INTEL_82801DB_12  0x24cc
-+#define PCI_DEVICE_ID_INTEL_82801DB_13	0x24cd
-+#define PCI_DEVICE_ID_INTEL_82801EB_0	0x24d0
-+#define PCI_DEVICE_ID_INTEL_82801EB_1	0x24d1
-+#define PCI_DEVICE_ID_INTEL_82801EB_2	0x24d2
-+#define PCI_DEVICE_ID_INTEL_82801EB_3	0x24d3
-+#define PCI_DEVICE_ID_INTEL_82801EB_4	0x24d4
-+#define PCI_DEVICE_ID_INTEL_82801EB_5	0x24d5
-+#define PCI_DEVICE_ID_INTEL_82801EB_6	0x24d6
-+#define PCI_DEVICE_ID_INTEL_82801EB_7	0x24d7
-+#define PCI_DEVICE_ID_INTEL_82801EB_11	0x24db
-+#define PCI_DEVICE_ID_INTEL_82801EB_13	0x24dd
-+#define PCI_DEVICE_ID_INTEL_ESB_1	0x25a1
-+#define PCI_DEVICE_ID_INTEL_ESB_2	0x25a2
-+#define PCI_DEVICE_ID_INTEL_ESB_3	0x25a3
-+#define PCI_DEVICE_ID_INTEL_ESB_31	0x25b0
-+#define PCI_DEVICE_ID_INTEL_ESB_4	0x25a4
-+#define PCI_DEVICE_ID_INTEL_ESB_5	0x25a6
-+#define PCI_DEVICE_ID_INTEL_ESB_6	0x25a7
-+#define PCI_DEVICE_ID_INTEL_ESB_7	0x25a9
-+#define PCI_DEVICE_ID_INTEL_ESB_8	0x25aa
-+#define PCI_DEVICE_ID_INTEL_ESB_9	0x25ab
-+#define PCI_DEVICE_ID_INTEL_ESB_11	0x25ac
-+#define PCI_DEVICE_ID_INTEL_ESB_12	0x25ad
-+#define PCI_DEVICE_ID_INTEL_ESB_13	0x25ae
-+#define PCI_DEVICE_ID_INTEL_82820_HB	0x2500
-+#define PCI_DEVICE_ID_INTEL_82820_UP_HB	0x2501
-+#define PCI_DEVICE_ID_INTEL_82850_HB	0x2530
-+#define PCI_DEVICE_ID_INTEL_82860_HB	0x2531
-+#define PCI_DEVICE_ID_INTEL_82845G_HB	0x2560
-+#define PCI_DEVICE_ID_INTEL_82845G_IG	0x2562
-+#define PCI_DEVICE_ID_INTEL_82865_HB	0x2570
-+#define PCI_DEVICE_ID_INTEL_82865_IG	0x2572
-+#define PCI_DEVICE_ID_INTEL_82875_HB	0x2578
-+#define PCI_DEVICE_ID_INTEL_82875_IG	0x257b
-+#define PCI_DEVICE_ID_INTEL_82915G_HB	0x2580
-+#define PCI_DEVICE_ID_INTEL_82915G_IG	0x2582
-+#define PCI_DEVICE_ID_INTEL_82915GM_HB	0x2590
-+#define PCI_DEVICE_ID_INTEL_82915GM_IG	0x2592
-+#define PCI_DEVICE_ID_INTEL_82945G_HB	0x2770
-+#define PCI_DEVICE_ID_INTEL_82945G_IG	0x2772
-+#define PCI_DEVICE_ID_INTEL_ICH6_0	0x2640
-+#define PCI_DEVICE_ID_INTEL_ICH6_1	0x2641
-+#define PCI_DEVICE_ID_INTEL_ICH6_2	0x2642
-+#define PCI_DEVICE_ID_INTEL_ICH6_3	0x2651
-+#define PCI_DEVICE_ID_INTEL_ICH6_4	0x2652
-+#define PCI_DEVICE_ID_INTEL_ICH6_5	0x2653
-+#define PCI_DEVICE_ID_INTEL_ICH6_6	0x2658
-+#define PCI_DEVICE_ID_INTEL_ICH6_7	0x2659
-+#define PCI_DEVICE_ID_INTEL_ICH6_8	0x265a
-+#define PCI_DEVICE_ID_INTEL_ICH6_9	0x265b
-+#define PCI_DEVICE_ID_INTEL_ICH6_10	0x265c
-+#define PCI_DEVICE_ID_INTEL_ICH6_11	0x2660
-+#define PCI_DEVICE_ID_INTEL_ICH6_12	0x2662
-+#define PCI_DEVICE_ID_INTEL_ICH6_13	0x2664
-+#define PCI_DEVICE_ID_INTEL_ICH6_14	0x2666
-+#define PCI_DEVICE_ID_INTEL_ICH6_15	0x2668
-+#define PCI_DEVICE_ID_INTEL_ICH6_16	0x266a
-+#define PCI_DEVICE_ID_INTEL_ICH6_17	0x266d
-+#define PCI_DEVICE_ID_INTEL_ICH6_18	0x266e
-+#define PCI_DEVICE_ID_INTEL_ICH6_19	0x266f
-+#define PCI_DEVICE_ID_INTEL_ESB2_0	0x2670
-+#define PCI_DEVICE_ID_INTEL_ESB2_1	0x2680
-+#define PCI_DEVICE_ID_INTEL_ESB2_2	0x2681
-+#define PCI_DEVICE_ID_INTEL_ESB2_3	0x2682
-+#define PCI_DEVICE_ID_INTEL_ESB2_4	0x2683
-+#define PCI_DEVICE_ID_INTEL_ESB2_5	0x2688
-+#define PCI_DEVICE_ID_INTEL_ESB2_6	0x2689
-+#define PCI_DEVICE_ID_INTEL_ESB2_7	0x268a
-+#define PCI_DEVICE_ID_INTEL_ESB2_8	0x268b
-+#define PCI_DEVICE_ID_INTEL_ESB2_9	0x268c
-+#define PCI_DEVICE_ID_INTEL_ESB2_10	0x2690
-+#define PCI_DEVICE_ID_INTEL_ESB2_11	0x2692
-+#define PCI_DEVICE_ID_INTEL_ESB2_12	0x2694
-+#define PCI_DEVICE_ID_INTEL_ESB2_13	0x2696
-+#define PCI_DEVICE_ID_INTEL_ESB2_14	0x2698
-+#define PCI_DEVICE_ID_INTEL_ESB2_15	0x2699
-+#define PCI_DEVICE_ID_INTEL_ESB2_16	0x269a
-+#define PCI_DEVICE_ID_INTEL_ESB2_17	0x269b
-+#define PCI_DEVICE_ID_INTEL_ESB2_18	0x269e
-+#define PCI_DEVICE_ID_INTEL_ICH7_0	0x27b8
-+#define PCI_DEVICE_ID_INTEL_ICH7_1	0x27b9
-+#define PCI_DEVICE_ID_INTEL_ICH7_2	0x27c0
-+#define PCI_DEVICE_ID_INTEL_ICH7_3	0x27c1
-+#define PCI_DEVICE_ID_INTEL_ICH7_30	0x27b0
-+#define PCI_DEVICE_ID_INTEL_ICH7_31	0x27bd
-+#define PCI_DEVICE_ID_INTEL_ICH7_5	0x27c4
-+#define PCI_DEVICE_ID_INTEL_ICH7_6	0x27c5
-+#define PCI_DEVICE_ID_INTEL_ICH7_7	0x27c8
-+#define PCI_DEVICE_ID_INTEL_ICH7_8	0x27c9
-+#define PCI_DEVICE_ID_INTEL_ICH7_9	0x27ca
-+#define PCI_DEVICE_ID_INTEL_ICH7_10	0x27cb
-+#define PCI_DEVICE_ID_INTEL_ICH7_11	0x27cc
-+#define PCI_DEVICE_ID_INTEL_ICH7_12	0x27d0
-+#define PCI_DEVICE_ID_INTEL_ICH7_13	0x27d2
-+#define PCI_DEVICE_ID_INTEL_ICH7_14	0x27d4
-+#define PCI_DEVICE_ID_INTEL_ICH7_15	0x27d6
-+#define PCI_DEVICE_ID_INTEL_ICH7_16	0x27d8
-+#define PCI_DEVICE_ID_INTEL_ICH7_17	0x27da
-+#define PCI_DEVICE_ID_INTEL_ICH7_18	0x27dc
-+#define PCI_DEVICE_ID_INTEL_ICH7_19	0x27dd
-+#define PCI_DEVICE_ID_INTEL_ICH7_20	0x27de
-+#define PCI_DEVICE_ID_INTEL_ICH7_21	0x27df
-+#define PCI_DEVICE_ID_INTEL_ICH7_22	0x27e0
-+#define PCI_DEVICE_ID_INTEL_ICH7_23	0x27e2
-+#define PCI_DEVICE_ID_INTEL_82855PM_HB	0x3340
-+#define PCI_DEVICE_ID_INTEL_ESB2_19	0x3500
-+#define PCI_DEVICE_ID_INTEL_ESB2_20	0x3501
-+#define PCI_DEVICE_ID_INTEL_ESB2_21	0x3504
-+#define PCI_DEVICE_ID_INTEL_ESB2_22	0x3505
-+#define PCI_DEVICE_ID_INTEL_ESB2_23	0x350c
-+#define PCI_DEVICE_ID_INTEL_ESB2_24	0x350d
-+#define PCI_DEVICE_ID_INTEL_ESB2_25	0x3510
-+#define PCI_DEVICE_ID_INTEL_ESB2_26	0x3511
-+#define PCI_DEVICE_ID_INTEL_ESB2_27	0x3514
-+#define PCI_DEVICE_ID_INTEL_ESB2_28	0x3515
-+#define PCI_DEVICE_ID_INTEL_ESB2_29	0x3518
-+#define PCI_DEVICE_ID_INTEL_ESB2_30	0x3519
-+#define PCI_DEVICE_ID_INTEL_82830_HB	0x3575
-+#define PCI_DEVICE_ID_INTEL_82830_CGC	0x3577
-+#define PCI_DEVICE_ID_INTEL_82855GM_HB	0x3580
-+#define PCI_DEVICE_ID_INTEL_82855GM_IG	0x3582
-+#define PCI_DEVICE_ID_INTEL_E7520_MCH	0x3590
-+#define PCI_DEVICE_ID_INTEL_E7320_MCH	0x3592
-+#define PCI_DEVICE_ID_INTEL_MCH_PA	0x3595
-+#define PCI_DEVICE_ID_INTEL_MCH_PA1	0x3596
-+#define PCI_DEVICE_ID_INTEL_MCH_PB	0x3597
-+#define PCI_DEVICE_ID_INTEL_MCH_PB1	0x3598
-+#define PCI_DEVICE_ID_INTEL_MCH_PC	0x3599
-+#define PCI_DEVICE_ID_INTEL_MCH_PC1	0x359a
-+#define PCI_DEVICE_ID_INTEL_E7525_MCH	0x359e
-+#define PCI_DEVICE_ID_INTEL_80310	0x530d
-+#define PCI_DEVICE_ID_INTEL_82371SB_0	0x7000
-+#define PCI_DEVICE_ID_INTEL_82371SB_1	0x7010
-+#define PCI_DEVICE_ID_INTEL_82371SB_2	0x7020
-+#define PCI_DEVICE_ID_INTEL_82437VX	0x7030
-+#define PCI_DEVICE_ID_INTEL_82439TX	0x7100
-+#define PCI_DEVICE_ID_INTEL_82371AB_0	0x7110
-+#define PCI_DEVICE_ID_INTEL_82371AB	0x7111
-+#define PCI_DEVICE_ID_INTEL_82371AB_2	0x7112
-+#define PCI_DEVICE_ID_INTEL_82371AB_3	0x7113
-+#define PCI_DEVICE_ID_INTEL_82810_MC1	0x7120
-+#define PCI_DEVICE_ID_INTEL_82810_IG1	0x7121
-+#define PCI_DEVICE_ID_INTEL_82810_MC3	0x7122
-+#define PCI_DEVICE_ID_INTEL_82810_IG3	0x7123
-+#define PCI_DEVICE_ID_INTEL_82810E_MC	0x7124
-+#define PCI_DEVICE_ID_INTEL_82810E_IG	0x7125
-+#define PCI_DEVICE_ID_INTEL_82443LX_0	0x7180
-+#define PCI_DEVICE_ID_INTEL_82443LX_1	0x7181
-+#define PCI_DEVICE_ID_INTEL_82443BX_0	0x7190
-+#define PCI_DEVICE_ID_INTEL_82443BX_1	0x7191
-+#define PCI_DEVICE_ID_INTEL_82443BX_2	0x7192
-+#define PCI_DEVICE_ID_INTEL_440MX	0x7195
-+#define PCI_DEVICE_ID_INTEL_82443MX_0	0x7198
-+#define PCI_DEVICE_ID_INTEL_82443MX_1	0x7199
-+#define PCI_DEVICE_ID_INTEL_82443MX_2	0x719a
-+#define PCI_DEVICE_ID_INTEL_82443MX_3	0x719b
-+#define PCI_DEVICE_ID_INTEL_82443GX_0	0x71a0
-+#define PCI_DEVICE_ID_INTEL_82443GX_1	0x71a1
-+#define PCI_DEVICE_ID_INTEL_82443GX_2	0x71a2
-+#define PCI_DEVICE_ID_INTEL_82372FB_0	0x7600
-+#define PCI_DEVICE_ID_INTEL_82372FB_1	0x7601
-+#define PCI_DEVICE_ID_INTEL_82372FB_2	0x7602
-+#define PCI_DEVICE_ID_INTEL_82372FB_3	0x7603
-+#define PCI_DEVICE_ID_INTEL_82454GX	0x84c4
-+#define PCI_DEVICE_ID_INTEL_82450GX	0x84c5
-+#define PCI_DEVICE_ID_INTEL_82451NX	0x84ca
-+#define PCI_DEVICE_ID_INTEL_82454NX     0x84cb
-+#define PCI_DEVICE_ID_INTEL_84460GX	0x84ea
-+#define PCI_DEVICE_ID_INTEL_IXP4XX	0x8500
-+#define PCI_DEVICE_ID_INTEL_IXP2400	0x9001
-+#define PCI_DEVICE_ID_INTEL_IXP2800	0x9004
-+#define PCI_DEVICE_ID_INTEL_S21152BB	0xb152
-+
-+#define PCI_VENDOR_ID_COMPUTONE		0x8e0e
-+#define PCI_DEVICE_ID_COMPUTONE_IP2EX	0x0291
-+#define PCI_DEVICE_ID_COMPUTONE_PG	0x0302
-+#define PCI_SUBVENDOR_ID_COMPUTONE	0x8e0e
-+#define PCI_SUBDEVICE_ID_COMPUTONE_PG4	0x0001
-+#define PCI_SUBDEVICE_ID_COMPUTONE_PG8	0x0002
-+#define PCI_SUBDEVICE_ID_COMPUTONE_PG6	0x0003
-+
-+#define PCI_VENDOR_ID_KTI		0x8e2e
-+#define PCI_DEVICE_ID_KTI_ET32P2	0x3000
-+
-+#define PCI_VENDOR_ID_ADAPTEC		0x9004
-+#define PCI_DEVICE_ID_ADAPTEC_7810	0x1078
-+#define PCI_DEVICE_ID_ADAPTEC_7821	0x2178
-+#define PCI_DEVICE_ID_ADAPTEC_38602	0x3860
-+#define PCI_DEVICE_ID_ADAPTEC_7850	0x5078
-+#define PCI_DEVICE_ID_ADAPTEC_7855	0x5578
-+#define PCI_DEVICE_ID_ADAPTEC_5800	0x5800
-+#define PCI_DEVICE_ID_ADAPTEC_3860	0x6038
-+#define PCI_DEVICE_ID_ADAPTEC_1480A	0x6075
-+#define PCI_DEVICE_ID_ADAPTEC_7860	0x6078
-+#define PCI_DEVICE_ID_ADAPTEC_7861	0x6178
-+#define PCI_DEVICE_ID_ADAPTEC_7870	0x7078
-+#define PCI_DEVICE_ID_ADAPTEC_7871	0x7178
-+#define PCI_DEVICE_ID_ADAPTEC_7872	0x7278
-+#define PCI_DEVICE_ID_ADAPTEC_7873	0x7378
-+#define PCI_DEVICE_ID_ADAPTEC_7874	0x7478
-+#define PCI_DEVICE_ID_ADAPTEC_7895	0x7895
-+#define PCI_DEVICE_ID_ADAPTEC_7880	0x8078
-+#define PCI_DEVICE_ID_ADAPTEC_7881	0x8178
-+#define PCI_DEVICE_ID_ADAPTEC_7882	0x8278
-+#define PCI_DEVICE_ID_ADAPTEC_7883	0x8378
-+#define PCI_DEVICE_ID_ADAPTEC_7884	0x8478
-+#define PCI_DEVICE_ID_ADAPTEC_7885	0x8578
-+#define PCI_DEVICE_ID_ADAPTEC_7886	0x8678
-+#define PCI_DEVICE_ID_ADAPTEC_7887	0x8778
-+#define PCI_DEVICE_ID_ADAPTEC_7888	0x8878
-+#define PCI_DEVICE_ID_ADAPTEC_1030	0x8b78
-+
-+#define PCI_VENDOR_ID_ADAPTEC2		0x9005
-+#define PCI_DEVICE_ID_ADAPTEC2_2940U2	0x0010
-+#define PCI_DEVICE_ID_ADAPTEC2_2930U2	0x0011
-+#define PCI_DEVICE_ID_ADAPTEC2_7890B	0x0013
-+#define PCI_DEVICE_ID_ADAPTEC2_7890	0x001f
-+#define PCI_DEVICE_ID_ADAPTEC2_3940U2	0x0050
-+#define PCI_DEVICE_ID_ADAPTEC2_3950U2D	0x0051
-+#define PCI_DEVICE_ID_ADAPTEC2_7896	0x005f
-+#define PCI_DEVICE_ID_ADAPTEC2_7892A	0x0080
-+#define PCI_DEVICE_ID_ADAPTEC2_7892B	0x0081
-+#define PCI_DEVICE_ID_ADAPTEC2_7892D	0x0083
-+#define PCI_DEVICE_ID_ADAPTEC2_7892P	0x008f
-+#define PCI_DEVICE_ID_ADAPTEC2_7899A	0x00c0
-+#define PCI_DEVICE_ID_ADAPTEC2_7899B	0x00c1
-+#define PCI_DEVICE_ID_ADAPTEC2_7899D	0x00c3
-+#define PCI_DEVICE_ID_ADAPTEC2_7899P	0x00cf
-+#define PCI_DEVICE_ID_ADAPTEC2_SCAMP	0x0503
-+
-+#define PCI_VENDOR_ID_ATRONICS		0x907f
-+#define PCI_DEVICE_ID_ATRONICS_2015	0x2015
-+
-+#define PCI_VENDOR_ID_HOLTEK		0x9412
-+#define PCI_DEVICE_ID_HOLTEK_6565	0x6565
-+
-+#define PCI_VENDOR_ID_NETMOS		0x9710
-+#define PCI_DEVICE_ID_NETMOS_9705	0x9705
-+#define PCI_DEVICE_ID_NETMOS_9715	0x9715
-+#define PCI_DEVICE_ID_NETMOS_9735	0x9735
-+#define PCI_DEVICE_ID_NETMOS_9745	0x9745
-+#define PCI_DEVICE_ID_NETMOS_9755	0x9755
-+#define PCI_DEVICE_ID_NETMOS_9805	0x9805
-+#define PCI_DEVICE_ID_NETMOS_9815	0x9815
-+#define PCI_DEVICE_ID_NETMOS_9835	0x9835
-+#define PCI_DEVICE_ID_NETMOS_9845	0x9845
-+#define PCI_DEVICE_ID_NETMOS_9855	0x9855
-+
-+#define PCI_SUBVENDOR_ID_EXSYS		0xd84d
-+#define PCI_SUBDEVICE_ID_EXSYS_4014	0x4014
-+
-+#define PCI_VENDOR_ID_TIGERJET		0xe159
-+#define PCI_DEVICE_ID_TIGERJET_300	0x0001
-+#define PCI_DEVICE_ID_TIGERJET_100	0x0002
-+
-+#define PCI_VENDOR_ID_TTTECH		0x0357
-+#define PCI_DEVICE_ID_TTTECH_MC322	0x000A
-+
-+#define PCI_VENDOR_ID_ARK		0xedd8
-+#define PCI_DEVICE_ID_ARK_STING		0xa091
-+#define PCI_DEVICE_ID_ARK_STINGARK	0xa099
-+#define PCI_DEVICE_ID_ARK_2000MT	0xa0a1