X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/e8b81c92e78dc781a9569d7d51bd4f98d89237f8..df75fe9f172b657962ff8a78a0cf32be541a81a6:/package/busybox/config/miscutils/Config.in diff --git a/package/busybox/config/miscutils/Config.in b/package/busybox/config/miscutils/Config.in index 44f11a98d..82e48f01f 100644 --- a/package/busybox/config/miscutils/Config.in +++ b/package/busybox/config/miscutils/Config.in @@ -5,9 +5,46 @@ menu "Miscellaneous Utilities" +config BUSYBOX_CONFIG_CONSPY + bool "conspy" + default n + depends on BUSYBOX_CONFIG_PLATFORM_LINUX + help + A text-mode VNC like program for Linux virtual terminals. + example: conspy NUM shared access to console num + or conspy -nd NUM screenshot of console num + or conspy -cs NUM poor man's GNU screen like +config BUSYBOX_CONFIG_NANDWRITE + bool "nandwrite" + default n + depends on BUSYBOX_CONFIG_PLATFORM_LINUX + help + Write to the specified MTD device, with bad blocks awareness + +config BUSYBOX_CONFIG_NANDDUMP + bool "nanddump" + default n + depends on BUSYBOX_CONFIG_PLATFORM_LINUX + help + Dump the content of raw NAND chip +config BUSYBOX_CONFIG_UBIATTACH + bool "ubiattach" + default n + depends on BUSYBOX_CONFIG_PLATFORM_LINUX + help + Attach MTD device to an UBI device. + +config BUSYBOX_CONFIG_UBIDETACH + bool "ubidetach" + default n + depends on BUSYBOX_CONFIG_PLATFORM_LINUX + help + Detach MTD device from an UBI device. + config BUSYBOX_CONFIG_ADJTIMEX bool "adjtimex" default n + depends on BUSYBOX_CONFIG_PLATFORM_LINUX help Adjtimex reads and optionally sets adjustment parameters for the Linux clock adjustment algorithm. @@ -19,6 +56,110 @@ config BUSYBOX_CONFIG_BBCONFIG The bbconfig applet will print the config file with which busybox was built. +config BUSYBOX_CONFIG_FEATURE_COMPRESS_BBCONFIG + bool "Compress bbconfig data" + default n + depends on BUSYBOX_CONFIG_BBCONFIG + help + Store bbconfig data in compressed form, uncompress them on-the-fly + before output. + + If you have a really tiny busybox with few applets enabled (and + bunzip2 isn't one of them), the overhead of the decompressor might + be noticeable. Also, if you run executables directly from ROM + and have very little memory, this might not be a win. Otherwise, + you probably want this. + +config BUSYBOX_CONFIG_BEEP + bool "beep" + default n + depends on BUSYBOX_CONFIG_PLATFORM_LINUX + help + The beep applets beeps in a given freq/Hz. + +config BUSYBOX_CONFIG_FEATURE_BEEP_FREQ + int "default frequency" + range 0 2147483647 + default 4000 + depends on BUSYBOX_CONFIG_BEEP + help + Frequency for default beep. + +config BUSYBOX_CONFIG_FEATURE_BEEP_LENGTH_MS + int "default length" + range 0 2147483647 + default 30 + depends on BUSYBOX_CONFIG_BEEP + help + Length in ms for default beep. + +config BUSYBOX_CONFIG_CHAT + bool "chat" + default n + help + Simple chat utility. + +config BUSYBOX_CONFIG_FEATURE_CHAT_NOFAIL + bool "Enable NOFAIL expect strings" + depends on BUSYBOX_CONFIG_CHAT + default n + help + When enabled expect strings which are started with a dash trigger + no-fail mode. That is when expectation is not met within timeout + the script is not terminated but sends next SEND string and waits + for next EXPECT string. This allows to compose far more flexible + scripts. + +config BUSYBOX_CONFIG_FEATURE_CHAT_TTY_HIFI + bool "Force STDIN to be a TTY" + depends on BUSYBOX_CONFIG_CHAT + default n + help + Original chat always treats STDIN as a TTY device and sets for it + so-called raw mode. This option turns on such behaviour. + +config BUSYBOX_CONFIG_FEATURE_CHAT_IMPLICIT_CR + bool "Enable implicit Carriage Return" + depends on BUSYBOX_CONFIG_CHAT + default n + help + When enabled make chat to terminate all SEND strings with a "\r" + unless "\c" is met anywhere in the string. + +config BUSYBOX_CONFIG_FEATURE_CHAT_SWALLOW_OPTS + bool "Swallow options" + depends on BUSYBOX_CONFIG_CHAT + default n + help + Busybox chat require no options. To make it not fail when used + in place of original chat (which has a bunch of options) turn + this on. + +config BUSYBOX_CONFIG_FEATURE_CHAT_SEND_ESCAPES + bool "Support weird SEND escapes" + depends on BUSYBOX_CONFIG_CHAT + default n + help + Original chat uses some escape sequences in SEND arguments which + are not sent to device but rather performs special actions. + E.g. "\K" means to send a break sequence to device. + "\d" delays execution for a second, "\p" -- for a 1/100 of second. + Before turning this option on think twice: do you really need them? + +config BUSYBOX_CONFIG_FEATURE_CHAT_VAR_ABORT_LEN + bool "Support variable-length ABORT conditions" + depends on BUSYBOX_CONFIG_CHAT + default n + help + Original chat uses fixed 50-bytes length ABORT conditions. Say N here. + +config BUSYBOX_CONFIG_FEATURE_CHAT_CLR_ABORT + bool "Support revoking of ABORT conditions" + depends on BUSYBOX_CONFIG_CHAT + default n + help + Support CLR_ABORT directive. + config BUSYBOX_CONFIG_CHRT bool "chrt" default n @@ -29,40 +170,45 @@ config BUSYBOX_CONFIG_CHRT config BUSYBOX_CONFIG_CROND bool "crond" default y - select BUSYBOX_CONFIG_FEATURE_SUID select BUSYBOX_CONFIG_FEATURE_SYSLOG help Crond is a background daemon that parses individual crontab files and executes commands on behalf of the users in question. - This is a port of dcron from slackware. It uses files of the + This is a port of dcron from slackware. It uses files of the format /var/spool/cron/crontabs/ files, for example: $ cat /var/spool/cron/crontabs/root # Run daily cron jobs at 4:40 every day: 40 4 * * * /etc/cron/daily > /dev/null 2>&1 - Note that Busybox binary must be setuid root for this applet to - work properly. -config BUSYBOX_CONFIG_DEBUG_CROND_OPTION - bool "Support debug option -d" +config BUSYBOX_CONFIG_FEATURE_CROND_D + bool "Support option -d to redirect output to stderr" depends on BUSYBOX_CONFIG_CROND default n help - Support option -d to enter debug mode. + -d sets loglevel to 0 (most verbose) and directs all output to stderr. config BUSYBOX_CONFIG_FEATURE_CROND_CALL_SENDMAIL - bool "Using /usr/sbin/sendmail?" + bool "Report command output via email (using sendmail)" default n depends on BUSYBOX_CONFIG_CROND help - Support calling /usr/sbin/sendmail for send cmd outputs. + Command output will be sent to corresponding user via email. + +config BUSYBOX_CONFIG_FEATURE_CROND_DIR + string "crond spool directory" + default "/var/spool/cron" + depends on BUSYBOX_CONFIG_CROND || BUSYBOX_CONFIG_CRONTAB + help + Location of crond spool. config BUSYBOX_CONFIG_CRONTAB bool "crontab" default y - select BUSYBOX_CONFIG_FEATURE_SUID help - Crontab manipulates the crontab for a particular user. Only + Crontab manipulates the crontab for a particular user. Only the superuser may specify a different user and/or crontab directory. + Note that Busybox binary must be setuid root for this applet to + work properly. config BUSYBOX_CONFIG_DC bool "dc" @@ -71,12 +217,24 @@ config BUSYBOX_CONFIG_DC Dc is a reverse-polish desk calculator which supports unlimited precision arithmetic. +config BUSYBOX_CONFIG_FEATURE_DC_LIBM + bool "Enable power and exp functions (requires libm)" + default n + depends on BUSYBOX_CONFIG_DC + help + Enable power and exp functions. + NOTE: This will require libm to be present for linking. + config BUSYBOX_CONFIG_DEVFSD bool "devfsd (obsolete)" default n + depends on BUSYBOX_CONFIG_PLATFORM_LINUX select BUSYBOX_CONFIG_FEATURE_SYSLOG help - This is deprecated, and will be removed at the end of 2008. + This is deprecated and should NOT be used anymore. + Use linux >= 2.6 (optionally with hotplug) and mdev instead! + See docs/mdev.txt for detailed instructions on how to use mdev + instead. Provides compatibility with old device names on a devfs systems. You should set it to true if you have devfs enabled. @@ -85,7 +243,7 @@ config BUSYBOX_CONFIG_DEVFSD "PERMISSIONS", "EXECUTE", "COPY", "IGNORE", "MKOLDCOMPAT", "MKNEWCOMPAT","RMOLDCOMPAT", "RMNEWCOMPAT". - But only if they are written UPPERCASE!!!!!!!! + But only if they are written UPPERCASE!!!!!!!! config BUSYBOX_CONFIG_DEVFSD_MODLOAD bool "Adds support for MODLOAD keyword in devsfd.conf" @@ -100,8 +258,9 @@ config BUSYBOX_CONFIG_DEVFSD_FG_NP default n depends on BUSYBOX_CONFIG_DEVFSD help - -fg Run the daemon in the foreground. - -np Exit after parsing the configuration file. Do not poll for events. + -fg Run the daemon in the foreground. + -np Exit after parsing the configuration file. + Do not poll for events. config BUSYBOX_CONFIG_DEVFSD_VERBOSE bool "Increases logging (and size)" @@ -111,28 +270,130 @@ config BUSYBOX_CONFIG_DEVFSD_VERBOSE Increases logging to stderr or syslog. config BUSYBOX_CONFIG_FEATURE_DEVFS - bool " Use devfs names for all devices (obsolete)" + bool "Use devfs names for all devices (obsolete)" default n + depends on BUSYBOX_CONFIG_PLATFORM_LINUX help - This is obsolete and will be going away at the end of 2008.. + This is obsolete and should NOT be used anymore. + Use linux >= 2.6 (optionally with hotplug) and mdev instead! - This tells busybox to look for names like /dev/loop/0 instead of - /dev/loop0. If your /dev directory has normal names instead of + For legacy systems -- if there is no way around devfsd -- this + tells busybox to look for names like /dev/loop/0 instead of + /dev/loop0. If your /dev directory has normal names instead of devfs names, you don't want this. +config BUSYBOX_CONFIG_DEVMEM + bool "devmem" + default n + help + devmem is a small program that reads and writes from physical + memory using /dev/mem. + config BUSYBOX_CONFIG_EJECT bool "eject" default n + depends on BUSYBOX_CONFIG_PLATFORM_LINUX + help + Used to eject cdroms. (defaults to /dev/cdrom) + +config BUSYBOX_CONFIG_FEATURE_EJECT_SCSI + bool "SCSI support" + default n + depends on BUSYBOX_CONFIG_EJECT + help + Add the -s option to eject, this allows to eject SCSI-Devices and + usb-storage devices. + +config BUSYBOX_CONFIG_FBSPLASH + bool "fbsplash" + default n + depends on BUSYBOX_CONFIG_PLATFORM_LINUX + help + Shows splash image and progress bar on framebuffer device. + Can be used during boot phase of an embedded device. ~2kb. + Usage: + - use kernel option 'vga=xxx' or otherwise enable fb device. + - put somewhere fbsplash.cfg file and an image in .ppm format. + - $ setsid fbsplash [params] & + -c: hide cursor + -d /dev/fbN: framebuffer device (if not /dev/fb0) + -s path_to_image_file (can be "-" for stdin) + -i path_to_cfg_file (can be "-" for stdin) + -f path_to_fifo (can be "-" for stdin) + - if you want to run it only in presence of kernel parameter: + grep -q "fbsplash=on" = 2.6.13 + +config BUSYBOX_CONFIG_INOTIFYD + bool "inotifyd" + default n + help + Simple inotify daemon. Reports filesystem changes. Requires + kernel >= 2.6.13 config BUSYBOX_CONFIG_LAST bool "last" default n - select BUSYBOX_CONFIG_FEATURE_WTMP + depends on BUSYBOX_CONFIG_FEATURE_WTMP help 'last' displays a list of the last users that logged into the system. +choice + prompt "Choose last implementation" + depends on BUSYBOX_CONFIG_LAST + default BUSYBOX_CONFIG_FEATURE_LAST_FANCY + +config BUSYBOX_CONFIG_FEATURE_LAST_SMALL + bool "small" + help + This is a small version of last with just the basic set of + features. + +config BUSYBOX_CONFIG_FEATURE_LAST_FANCY + bool "huge" + help + 'last' displays detailed information about the last users that + logged into the system (mimics sysvinit last). +900 bytes. +endchoice + config BUSYBOX_CONFIG_LESS bool "less" default y @@ -163,14 +424,6 @@ config BUSYBOX_CONFIG_FEATURE_LESS_FLAGS The -M flag enables a more sophisticated status line. The -m flag enables a simpler status line with a percentage. -config BUSYBOX_CONFIG_FEATURE_LESS_FLAGCS - bool "Enable flag changes" - default n - depends on BUSYBOX_CONFIG_LESS - help - This enables the ability to change command-line flags within - less itself. - config BUSYBOX_CONFIG_FEATURE_LESS_MARKS bool "Enable marks" default n @@ -185,12 +438,35 @@ config BUSYBOX_CONFIG_FEATURE_LESS_REGEXP help Enable regular expressions, allowing complex file searches. +config BUSYBOX_CONFIG_FEATURE_LESS_WINCH + bool "Enable automatic resizing on window size changes" + default n + depends on BUSYBOX_CONFIG_LESS + help + Makes less track window size changes. + +config BUSYBOX_CONFIG_FEATURE_LESS_DASHCMD + bool "Enable flag changes ('-' command)" + default n + depends on BUSYBOX_CONFIG_LESS + help + This enables the ability to change command-line flags within + less itself ('-' keyboard command). + +config BUSYBOX_CONFIG_FEATURE_LESS_LINENUMS + bool "Enable dynamic switching of line numbers" + default n + depends on BUSYBOX_CONFIG_FEATURE_LESS_DASHCMD + help + Enables "-N" command. + config BUSYBOX_CONFIG_HDPARM bool "hdparm" default n + depends on BUSYBOX_CONFIG_PLATFORM_LINUX help - Get/Set hard drive parameters. Primarily intended for ATA - drives. Adds about 13k (or around 30k if you enable the + Get/Set hard drive parameters. Primarily intended for ATA + drives. Adds about 13k (or around 30k if you enable the FEATURE_HDPARM_GET_IDENTITY option).... config BUSYBOX_CONFIG_FEATURE_HDPARM_GET_IDENTITY @@ -220,7 +496,7 @@ config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_UNREGISTER_HWIF This is dangerous stuff, so you should probably say N. config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET - bool "perform device reset (DANGEROUS)" + bool "Perform device reset (DANGEROUS)" default n depends on BUSYBOX_CONFIG_HDPARM help @@ -228,21 +504,20 @@ config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_DRIVE_RESET This is dangerous stuff, so you should probably say N. config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_TRISTATE_HWIF - bool "tristate device for hotswap (DANGEROUS)" + bool "Tristate device for hotswap (DANGEROUS)" default n depends on BUSYBOX_CONFIG_HDPARM help Enables the 'hdparm -x' option to tristate device for hotswap, - and the '-b' option to get/set bus state. This is dangerous + and the '-b' option to get/set bus state. This is dangerous stuff, so you should probably say N. config BUSYBOX_CONFIG_FEATURE_HDPARM_HDIO_GETSET_DMA - bool "get/set using_dma flag (DANGEROUS)" + bool "Get/set using_dma flag" default n depends on BUSYBOX_CONFIG_HDPARM help Enables the 'hdparm -d' option to get/set using_dma flag. - This is dangerous stuff, so you should probably say N. config BUSYBOX_CONFIG_LOCK bool "lock" @@ -256,15 +531,15 @@ config BUSYBOX_CONFIG_MAKEDEVS help 'makedevs' is a utility used to create a batch of devices with one command. - . + There are two choices for command line behaviour, the interface as used by LEAF/Linux Router Project, or a device table file. - . + 'leaf' is traditionally what busybox follows, it allows multiple devices of a particluar type to be created per command. e.g. /dev/hda[0-9] Device properties are passed as command line arguments. - . + 'table' reads device properties from a file or stdin, allowing a batch of unrelated devices to be made with one command. User/group names are allowed as an alternative to uid/gid. @@ -282,6 +557,18 @@ config BUSYBOX_CONFIG_FEATURE_MAKEDEVS_TABLE endchoice +config BUSYBOX_CONFIG_MAN + bool "man" + default n + help + Format and display manual pages. + +config BUSYBOX_CONFIG_MICROCOM + bool "microcom" + default n + help + The poor man's minicom utility for chatting with serial port devices. + config BUSYBOX_CONFIG_MOUNTPOINT bool "mountpoint" default n @@ -292,13 +579,14 @@ config BUSYBOX_CONFIG_MT bool "mt" default n help - mt is used to control tape devices. You can use the mt utility + mt is used to control tape devices. You can use the mt utility to advance or rewind a tape past a specified number of archive files on the tape. config BUSYBOX_CONFIG_RAIDAUTORUN bool "raidautorun" default n + depends on BUSYBOX_CONFIG_PLATFORM_LINUX help raidautorun tells the kernel md driver to search and start RAID arrays. @@ -306,20 +594,32 @@ config BUSYBOX_CONFIG_RAIDAUTORUN config BUSYBOX_CONFIG_READAHEAD bool "readahead" default n - depends on BUSYBOX_CONFIG_LFS + depends on BUSYBOX_CONFIG_LFS && BUSYBOX_CONFIG_PLATFORM_LINUX help Preload the files listed on the command line into RAM cache so that subsequent reads on these files will not block on disk I/O. This applet just calls the readahead(2) system call on each file. It is mainly useful in system startup scripts to preload files - or executables before they are used. When used at the right time - (in particular when a CPU boundprocess is running) it can + or executables before they are used. When used at the right time + (in particular when a CPU bound process is running) it can significantly speed up system startup. As readahead(2) blocks until each file has been read, it is best to run this applet as a background job. +config BUSYBOX_CONFIG_RFKILL + bool "rfkill" + default n + depends on BUSYBOX_CONFIG_PLATFORM_LINUX + help + Enable/disable wireless devices. + + rfkill list : list all wireless devices + rfkill list bluetooth : list all bluetooth devices + rfkill list 1 : list device corresponding to the given index + rfkill block|unblock wlan : block/unblock all wlan(wifi) devices + config BUSYBOX_CONFIG_RUNLEVEL bool "runlevel" default n @@ -332,9 +632,16 @@ config BUSYBOX_CONFIG_RUNLEVEL config BUSYBOX_CONFIG_RX bool "rx" default n + depends on BUSYBOX_CONFIG_PLATFORM_LINUX help Receive files using the Xmodem protocol. +config BUSYBOX_CONFIG_SETSID + bool "setsid" + default n + help + setsid runs a program in a new session + config BUSYBOX_CONFIG_STRINGS bool "strings" default y @@ -342,12 +649,6 @@ config BUSYBOX_CONFIG_STRINGS strings prints the printable character sequences for each file specified. -config BUSYBOX_CONFIG_SETSID - bool "setsid" - default n - help - setsid runs a program in a new session - config BUSYBOX_CONFIG_TASKSET bool "taskset" default n @@ -356,7 +657,7 @@ config BUSYBOX_CONFIG_TASKSET This requires sched_{g,s}etaffinity support in your libc. config BUSYBOX_CONFIG_FEATURE_TASKSET_FANCY - bool "fancy output" + bool "Fancy output" default n depends on BUSYBOX_CONFIG_TASKSET help @@ -372,24 +673,44 @@ config BUSYBOX_CONFIG_TIME When the command finishes, time writes a message to standard output giving timing statistics about this program run. +config BUSYBOX_CONFIG_TIMEOUT + bool "timeout" + default n + help + Runs a program and watches it. If it does not terminate in + specified number of seconds, it is sent a signal. + config BUSYBOX_CONFIG_TTYSIZE bool "ttysize" default n help A replacement for "stty size". Unlike stty, can report only width, - only height, or both, in any order. It also does not complain on error, - but returns default 80x24. Usage in shell scripts: width=`ttysize w`. + only height, or both, in any order. It also does not complain on + error, but returns default 80x24. + Usage in shell scripts: width=`ttysize w`. + +config BUSYBOX_CONFIG_VOLNAME + bool "volname" + default n + help + Prints a CD-ROM volume name. + +config BUSYBOX_CONFIG_WALL + bool "wall" + default n + help + Write a message to all users that are logged in. config BUSYBOX_CONFIG_WATCHDOG bool "watchdog" default y + depends on BUSYBOX_CONFIG_PLATFORM_LINUX help The watchdog utility is used with hardware or software watchdog - device drivers. It opens the specified watchdog device special file - and periodically writes a magic character to the device. If the + device drivers. It opens the specified watchdog device special file + and periodically writes a magic character to the device. If the watchdog applet ever fails to write the magic character within a certain amount of time, the watchdog device assumes the system has hung, and will cause the hardware to reboot. endmenu -