X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/ebbec463c78aa5c4450a4e6be9ed1207f662e4ec..8b4aee843bbd9d4e87e2c63b9c6d9d34c142a272:/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch

diff --git a/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch b/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch
index 9927f6d73..425b698be 100644
--- a/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch
+++ b/target/linux/ar71xx/patches-3.2/610-MIPS-ath79-openwrt-machines.patch
@@ -1,6 +1,6 @@
 --- a/arch/mips/ath79/machtypes.h
 +++ b/arch/mips/ath79/machtypes.h
-@@ -16,17 +16,79 @@
+@@ -16,17 +16,81 @@
  
  enum ath79_mach_type {
  	ATH79_MACH_GENERIC = 0,
@@ -18,6 +18,7 @@
  	ATH79_MACH_PB44,		/* Atheros PB44 reference board */
 +	ATH79_MACH_DIR_600_A1,		/* D-Link DIR-600 rev. A1 */
 +	ATH79_MACH_DIR_615_C1,		/* D-Link DIR-615 rev. C1 */
++	ATH79_MACH_DIR_615_E4,		/* D-Link DIR-615 rev. E4 */
 +	ATH79_MACH_DIR_825_B1,		/* D-Link DIR-825 rev. B1 */
 +	ATH79_MACH_EAP7660D,		/* Senao EAP7660D */
 +	ATH79_MACH_JA76PF,		/* jjPlus JA76PF */
@@ -40,6 +41,7 @@
 +	ATH79_MACH_RB_750,		/* MikroTik RouterBOARD 750 */
 +	ATH79_MACH_RW2458N,		/* Redwave RW2458N */
 +	ATH79_MACH_TEW_632BRP,		/* TRENDnet TEW-632BRP */
++	ATH79_MACH_TL_MR11U,		/* TP-LINK TL-MR11U */
 +	ATH79_MACH_TL_MR3020,		/* TP-LINK TL-MR3020 */
 +	ATH79_MACH_TL_MR3220,		/* TP-LINK TL-MR3220 */
 +	ATH79_MACH_TL_MR3420,		/* TP-LINK TL-MR3420 */
@@ -186,7 +188,7 @@
  config ATH79_MACH_PB44
  	bool "Atheros PB44 reference board"
  	select SOC_AR71XX
-@@ -54,6 +137,359 @@ config ATH79_MACH_PB44
+@@ -54,6 +137,369 @@ config ATH79_MACH_PB44
  	  Say 'Y' here if you want your kernel to support the
  	  Atheros PB44 reference board.
  
@@ -276,7 +278,7 @@
 +	select MYLOADER
 +
 +config ATH79_MACH_DIR_600_A1
-+	bool "D-Link DIR-600 rev. A1 support"
++	bool "D-Link DIR-600 A1/DIR-615 E4 support"
 +	select SOC_AR724X
 +	select ATH79_DEV_AP9X_PCI if PCI
 +	select ATH79_DEV_ETH
@@ -419,6 +421,16 @@
 +	select ATH79_DEV_LEDS_GPIO
 +	select ATH79_DEV_M25P80
 +
++config ATH79_MACH_TL_MR11U
++	bool "TP-LINK TL-MR11U support"
++	select SOC_AR933X
++	select ATH79_DEV_ETH
++	select ATH79_DEV_GPIO_BUTTONS
++	select ATH79_DEV_LEDS_GPIO
++	select ATH79_DEV_M25P80
++	select ATH79_DEV_USB
++	select ATH79_DEV_WMAC
++
 +config ATH79_MACH_TL_MR3020
 +	bool "TP-LINK TL-MR3020 support"
 +	select SOC_AR933X
@@ -546,7 +558,7 @@
  config ATH79_MACH_UBNT_XM
  	bool "Ubiquiti Networks XM (rev 1.0) board"
  	select SOC_AR724X
-@@ -67,6 +503,24 @@ config ATH79_MACH_UBNT_XM
+@@ -67,6 +513,24 @@ config ATH79_MACH_UBNT_XM
  	  Say 'Y' here if you want your kernel to support the
  	  Ubiquiti Networks XM (rev 1.0) board.
  
@@ -571,7 +583,7 @@
  endmenu
  
  config SOC_AR71XX
-@@ -96,10 +550,6 @@ config SOC_AR934X
+@@ -96,10 +560,6 @@ config SOC_AR934X
  	select PCI_AR724X if PCI
  	def_bool n
  
@@ -582,7 +594,7 @@
  config ATH79_DEV_AP9X_PCI
  	select ATH79_PCI_ATH9K_FIXUP
  	def_bool n
-@@ -110,7 +560,14 @@ config ATH79_DEV_DSA
+@@ -110,7 +570,14 @@ config ATH79_DEV_DSA
  config ATH79_DEV_ETH
  	def_bool n
  
@@ -598,7 +610,7 @@
  	def_bool n
  
  config ATH79_DEV_GPIO_BUTTONS
-@@ -135,4 +592,7 @@ config ATH79_NVRAM
+@@ -135,4 +602,7 @@ config ATH79_NVRAM
  config ATH79_PCI_ATH9K_FIXUP
  	def_bool n
  
@@ -608,7 +620,7 @@
  endif
 --- a/arch/mips/ath79/Makefile
 +++ b/arch/mips/ath79/Makefile
-@@ -36,8 +36,55 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP)	+= p
+@@ -36,8 +36,56 @@ obj-$(CONFIG_ATH79_PCI_ATH9K_FIXUP)	+= p
  #
  # Machines
  #
@@ -640,6 +652,7 @@
 +obj-$(CONFIG_ATH79_MACH_RB750)		+= mach-rb750.o
 +obj-$(CONFIG_ATH79_MACH_RW2458N)	+= mach-rw2458n.o
 +obj-$(CONFIG_ATH79_MACH_TEW_632BRP)	+= mach-tew-632brp.o
++obj-$(CONFIG_ATH79_MACH_TL_MR11U)	+= mach-tl-mr11u.o
 +obj-$(CONFIG_ATH79_MACH_TL_MR3020)	+= mach-tl-mr3020.o
 +obj-$(CONFIG_ATH79_MACH_TL_MR3X20)	+= mach-tl-mr3x20.o
 +obj-$(CONFIG_ATH79_MACH_TL_WA901ND)	+= mach-tl-wa901nd.o