X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/ef998d64e381ed0a92fc73edf4206f7be7335caf..e617fcefcd55b1184a1626ce34ab898832208862:/package/madwifi/Makefile

diff --git a/package/madwifi/Makefile b/package/madwifi/Makefile
index 380ec4ad6..ac15b2c67 100644
--- a/package/madwifi/Makefile
+++ b/package/madwifi/Makefile
@@ -1,5 +1,5 @@
 # 
-# Copyright (C) 2006 OpenWrt.org
+# Copyright (C) 2006-2008 OpenWrt.org
 #
 # This is free software, licensed under the GNU General Public License v2.
 # See /LICENSE for more information.
@@ -10,15 +10,33 @@ include $(TOPDIR)/rules.mk
 include $(INCLUDE_DIR)/kernel.mk
 
 PKG_NAME:=madwifi
-PKG_VERSION:=0.9.0
+PKG_REV:=3314
+PKG_VERSION:=r$(PKG_REV)
+# PKG_BRANCH:=madwifi-dfs
 PKG_RELEASE:=1
-PKG_MD5SUM:=9b558d1df84cab2b0006c595feee0fba
 
-PKG_SOURCE_URL:=@SF/$(PKG_NAME)
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-PKG_CAT:=bzcat
+PKG_SOURCE_PROTO:=svn
+PKG_SOURCE_VERSION:=$(PKG_REV)
+PKG_SOURCE_SUBDIR:=$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi-trunk)-$(PKG_VERSION)
+PKG_SOURCE_URL:=http://svn.madwifi.org/madwifi/$(if $(PKG_BRANCH),branches/$(PKG_BRANCH),trunk)
+PKG_SOURCE:=$(PKG_SOURCE_SUBDIR).tar.gz
 
-PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
+PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(if $(PKG_BRANCH),$(PKG_BRANCH),madwifi-trunk)-$(PKG_VERSION)
+
+include $(INCLUDE_DIR)/package.mk
+
+ifneq ($(CONFIG_TARGET_atheros),)
+  BUS:=AHB
+else
+  ifneq ($(CONFIG_PCI_SUPPORT),)
+    BUS:=PCI
+  endif
+endif
+
+# XXX: remove this check later when we have PCI support properly detected on all targets
+ifneq ($(CONFIG_TARGET_ar7)$(CONFIG_TARGET_uml),)
+  BUS:=
+endif
 
 ifeq ($(ARCH),mips)
   HAL_TARGET:=mips-be-elf
@@ -29,97 +47,171 @@ endif
 ifeq ($(ARCH),i386)
   HAL_TARGET:=i386-elf
 endif
-ifeq ($(ARCH),armeb)
+ifeq ($(ARCH),i686)
+  HAL_TARGET:=i386-elf
+endif
+ifeq ($(BOARD),ixp4xx)
   HAL_TARGET:=xscale-be-elf
 endif
-
-BUS := PCI
-ifneq ($(CONFIG_LINUX_2_4_AR531X),)
-  BUS := AHB
+ifeq ($(BOARD),iop32x)
+  HAL_TARGET:=xscale-le-elf
+endif
+ifeq ($(BOARD),orion)
+  HAL_TARGET:=xscale-le-elf
 endif
-ifneq ($(CONFIG_LINUX_2_6_ARUBA),)
-  BUS := PCI AHB	# no suitable HAL for AHB yet.
+ifeq ($(ARCH),powerpc)
+  HAL_TARGET:=powerpc-be-elf
+endif
+ifeq ($(BOARD),storm)
+  HAL_TARGET:=armv4-le-elf
+endif
+ifneq ($(CONFIG_TARGET_atheros),)
+  HAL_TARGET:=wisoc
 endif
 
-BUS_MODULES:=
-ifeq ($(findstring AHB,$(BUS)),AHB)
-  BUS_MODULES+=$(PKG_BUILD_DIR)/ath/ath_ahb.$(LINUX_KMOD_SUFFIX)
+ifdef CONFIG_MADWIFI_RCA_MINSTREL
+  RATE_CONTROL:=minstrel
 endif
-ifeq ($(findstring PCI,$(BUS)),PCI)
-  BUS_MODULES+=$(PKG_BUILD_DIR)/ath/ath_pci.$(LINUX_KMOD_SUFFIX)
+
+ifdef CONFIG_MADWIFI_RCA_ONOE
+  RATE_CONTROL:=onoe
 endif
 
-MADWIFI_MAKEOPTS= -C $(PKG_BUILD_DIR) \
-		ARCH="$(LINUX_KARCH)" \
-		CROSS_COMPILE="$(TARGET_CROSS)" \
-		CC="$(TARGET_CC)" \
-		TARGET="$(HAL_TARGET)" \
-		TOOLPREFIX="$(KERNEL_CROSS)" \
-		TOOLPATH="$(KERNEL_CROSS)" \
-		KERNELPATH="$(LINUX_DIR)" \
-		LDOPTS="" \
-		DOMULTI=1
+ifdef CONFIG_MADWIFI_RCA_AMRR
+  RATE_CONTROL:=amrr
+endif
 
-include $(INCLUDE_DIR)/package.mk
+ifdef CONFIG_MADWIFI_RCA_SAMPLERATE
+  RATE_CONTROL:=sample
+endif
+
+MADWIFI_FILES:= \
+	$(PKG_BUILD_DIR)/net80211/wlan.$(LINUX_KMOD_SUFFIX) \
+	$(PKG_BUILD_DIR)/net80211/wlan_scan_ap.$(LINUX_KMOD_SUFFIX) \
+	$(PKG_BUILD_DIR)/net80211/wlan_scan_sta.$(LINUX_KMOD_SUFFIX) \
+	$(PKG_BUILD_DIR)/ath_hal/ath_hal.$(LINUX_KMOD_SUFFIX) \
+	$(PKG_BUILD_DIR)/ath_rate/$(RATE_CONTROL)/ath_rate_$(RATE_CONTROL).$(LINUX_KMOD_SUFFIX) \
+	$(PKG_BUILD_DIR)/net80211/wlan_acl.$(LINUX_KMOD_SUFFIX) \
+	$(PKG_BUILD_DIR)/net80211/wlan_ccmp.$(LINUX_KMOD_SUFFIX) \
+	$(PKG_BUILD_DIR)/net80211/wlan_tkip.$(LINUX_KMOD_SUFFIX) \
+	$(PKG_BUILD_DIR)/net80211/wlan_wep.$(LINUX_KMOD_SUFFIX) \
+	$(PKG_BUILD_DIR)/net80211/wlan_xauth.$(LINUX_KMOD_SUFFIX) \
+
+MADWIFI_AUTOLOAD:= \
+	wlan \
+	wlan_scan_ap \
+	wlan_scan_sta \
+	ath_hal \
+	ath_rate_$(RATE_CONTROL) \
+	wlan_acl \
+	wlan_ccmp \
+	wlan_tkip \
+	wlan_wep \
+	wlan_xauth \
 
 ifeq ($(findstring AHB,$(BUS)),AHB)
-define Build/Compile/ahb
-	$(MAKE) $(MADWIFI_MAKEOPTS) BUS="AHB" all
-endef
+  MADWIFI_FILES+= $(PKG_BUILD_DIR)/ath/ath_ahb.$(LINUX_KMOD_SUFFIX)
+  MADWIFI_AUTOLOAD+= ath_ahb
 endif
-
 ifeq ($(findstring PCI,$(BUS)),PCI)
-define Build/Compile/pci
-	$(MAKE) $(MADWIFI_MAKEOPTS) BUS="PCI" all
-endef
+  MADWIFI_FILES+= $(PKG_BUILD_DIR)/ath/ath_pci.$(LINUX_KMOD_SUFFIX)
+  MADWIFI_AUTOLOAD+= ath_pci
 endif
 
-define Build/Compile
-$(call Build/Compile/ahb)
-$(call Build/Compile/pci)
-endef
+MADWIFI_APPLETS:=80211stats,athchans,athctrl,athkey,athstats,wlanconfig,ath_info
+ifdef CONFIG_MADWIFI_DEBUG
+  MADWIFI_APPLETS:=$(strip $(MADWIFI_APPLETS)),athdebug,80211debug
+endif
 
-define Build/InstallDev
-	mkdir -p $(STAGING_DIR)/usr/include/madwifi
-	$(CP) $(PKG_BUILD_DIR)/include $(STAGING_DIR)/usr/include/madwifi/
-	mkdir -p $(STAGING_DIR)/usr/include/madwifi/net80211
-	$(CP) $(PKG_BUILD_DIR)/net80211/*.h $(STAGING_DIR)/usr/include/madwifi/net80211/
+
+define KernelPackage/madwifi
+  SUBMENU:=Wireless Drivers
+  TITLE:=Driver for Atheros wireless chipsets
+  URL:=http://madwifi.org/
+  DEPENDS:=+wireless-tools @PCI_SUPPORT||TARGET_atheros @!TARGET_ar7 @!TARGET_avr32 @!TARGET_etrax @!TARGET_uml
+  FILES:=$(MADWIFI_FILES)
+  AUTOLOAD:=$(call AutoLoad,50,$(MADWIFI_AUTOLOAD))
 endef
 
-define Build/UninstallDev
-	rm -rf $(STAGING_DIR)/usr/include/madwifi
+define KernelPackage/madwifi/description
+ This package contains a driver for Atheros 802.11a/b/g chipsets.
 endef
 
-define Package/kmod-madwifi
- SECTION:=drivers
- CATEGORY:=Drivers
- DEFAULT:=y if LINUX_2_6_BRCM || LINUX_2_6_ARUBA || LINUX_2_4_AR531X || LINUX_2_6_XSCALE, m if ALL
- TITLE:=Driver for Atheros wireless chipsets
- DESCRIPTION:=Driver for Atheros 802.11a/b/g chipsets
- URL:=http://madwifi.org/
- VERSION:=$(LINUX_VERSION)+$(PKG_VERSION)-$(BOARD)-$(PKG_RELEASE)
+define KernelPackage/madwifi/config
+	source "$(SOURCE)/Config.in"
 endef
 
-define Package/kmod-madwifi/install
-	mkdir -p $(1)/etc/modules.d
-	mkdir -p $(1)/etc/init.d
-	mkdir -p $(1)/lib/modules/$(LINUX_VERSION)
-	mkdir -p $(1)/usr/sbin
-	install -m0644 ./files/madwifi.modules $(1)/etc/modules.d/20-madwifi
+MAKE_ARGS:= \
+	PATH="$(TARGET_PATH)" \
+	ARCH="$(LINUX_KARCH)" \
+	CROSS_COMPILE="$(TARGET_CROSS)" \
+	TARGET="$(HAL_TARGET)" \
+	TOOLPREFIX="$(KERNEL_CROSS)" \
+	TOOLPATH="$(KERNEL_CROSS)" \
+	KERNELPATH="$(LINUX_DIR)" \
+	LDOPTS="--no-warn-mismatch " \
+	ATH_RATE="ath_rate/$(RATE_CONTROL)" \
+	WARNINGS="-Wno-unused" \
+	$(if $(CONFIG_MADWIFI_DEBUG),,DEBUG="") \
+	DO_MULTI=1
+
+MAKE_VARS:= \
+	COPTS="-DCONFIG_ATHEROS_RATE_DEFAULT='\"$(RATE_CONTROL)\"' -DATH_REVERSE_ENGINEERING=1" \
+
+HALFILE:=$(lastword $(sort $(wildcard ./ath_hal-*.tgz)))
+ifneq ($(HALFILE),)
+  define Build/Prepare
+	$(call Build/Prepare/Default)
+	rm -rf $(PKG_BUILD_DIR)/tmp
+	mkdir -p $(PKG_BUILD_DIR)/tmp
+	tar xvzf $(HALFILE) -C $(PKG_BUILD_DIR)/tmp
+	$(CP) $(PKG_BUILD_DIR)/tmp/ath_hal*/* $(PKG_BUILD_DIR)/hal/
+	rm -rf $(PKG_BUILD_DIR)/tmp
+	# patch cflags
+	$(SED) 's, -E[LB],,' \
+		-e 's, -mips2,,' \
+		-e 's, -mapcs-32,,' \
+		$(PKG_BUILD_DIR)/hal/public/*.inc
+	$(SED) 's,march=armv4,march=armv5te,' \
+		$(PKG_BUILD_DIR)/hal/public/xscale*.inc
+  endef
+endif
+
 ifeq ($(findstring AHB,$(BUS)),AHB)
-	echo ath_ahb >> $(1)/etc/modules.d/20-madwifi
+  define Build/Compile/ahb
+	$(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) BUS="AHB" modules
+	$(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) CFLAGS="$(TARGET_CFLAGS)" tools
+  endef
 endif
+
 ifeq ($(findstring PCI,$(BUS)),PCI)
-	echo ath_pci >> $(1)/etc/modules.d/20-madwifi
-endif
-	install -m0755 ./files/madwifi.init $(1)/etc/init.d/S20madwifi
-	$(CP) \
-		$(PKG_BUILD_DIR)/ath_hal/ath_hal.$(LINUX_KMOD_SUFFIX) \
-		$(BUS_MODULES) \
-		$(PKG_BUILD_DIR)/ath_rate/sample/ath_rate_sample.$(LINUX_KMOD_SUFFIX) \
-		$(PKG_BUILD_DIR)/net80211/*.$(LINUX_KMOD_SUFFIX) \
-		$(1)/lib/modules/$(LINUX_VERSION)/
-	$(CP) $(PKG_BUILD_DIR)/tools/{madwifi_multi,80211debug,80211stats,athchans,athctrl,athdebug,athkey,athstats,wlanconfig} $(1)/usr/sbin/
+  define Build/Compile/pci
+	$(MAKE_VARS) $(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) BUS="PCI" modules
+	$(MAKE) -C $(PKG_BUILD_DIR) $(MAKE_ARGS) CFLAGS="$(TARGET_CFLAGS)" tools
+  endef
+endif
+
+define Build/Configure
+	$(SED) 's,-E[LB] ,,g' $(PKG_BUILD_DIR)/hal/public/*.inc
+endef
+
+define Build/Compile
+	$(call Build/Compile/ahb)
+	$(call Build/Compile/pci)
+endef
+
+define Build/InstallDev
+	mkdir -p $(1)/usr/include/madwifi
+	$(CP) $(PKG_BUILD_DIR)/include $(1)/usr/include/madwifi/
+	mkdir -p $(1)/usr/include/madwifi/net80211
+	$(CP) $(PKG_BUILD_DIR)/net80211/*.h $(1)/usr/include/madwifi/net80211/
+endef
+
+define KernelPackage/madwifi/install
+	$(INSTALL_DIR) $(1)/lib/wifi
+	$(INSTALL_DATA) ./files/lib/wifi/madwifi.sh $(1)/lib/wifi
+	$(INSTALL_DIR) $(1)/usr/sbin
+	$(CP) $(PKG_BUILD_DIR)/tools/{madwifi_multi,$(MADWIFI_APPLETS)} $(1)/usr/sbin/
 endef
 
-$(eval $(call BuildPackage,kmod-madwifi))
+$(eval $(call KernelPackage,madwifi))