X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/f57ff12b980ffee7bdbc42105d366a5900ad3c10..46495ea2d9709eac79bc4cfb13f13f4d778f3d47:/target/linux/ramips/image/Makefile diff --git a/target/linux/ramips/image/Makefile b/target/linux/ramips/image/Makefile index c6b214ff3..97f4a9a42 100644 --- a/target/linux/ramips/image/Makefile +++ b/target/linux/ramips/image/Makefile @@ -11,9 +11,15 @@ define imgname $(BIN_DIR)/$(IMG_PREFIX)-$(2)-$(1) endef +define sysupname +$(call imgname,$(1),$(2))-sysupgrade.bin +endef + VMLINUX:=$(IMG_PREFIX)-vmlinux UIMAGE:=$(IMG_PREFIX)-uImage +fs_squash:=squashfs-only ifeq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y) + fs_squash:=initramfs VMLINUX:=$(IMG_PREFIX)-vmlinux-initramfs UIMAGE:=$(IMG_PREFIX)-uImage-initramfs endif @@ -28,6 +34,10 @@ define kernel_entry endef endif +define mkcmdline +board=$(1) console=$(2),$(3) +endef + define CompressLzma $(STAGING_DIR_HOST)/bin/lzma e $(1) -lc1 -lp2 -pb2 $(2) endef @@ -44,37 +54,87 @@ define MkImage -d $(2) $(3) endef +define MkImageLzma + $(call PatchKernelLzma,$(1),$(2)) + $(call MkImage,lzma,$(KDIR)/vmlinux-$(1).bin.lzma,$(KDIR)/vmlinux-$(1).uImage) +endef + +define CatFiles + if [ `stat -c%s "$(1)"` -gt $(2) ]; then \ + echo "Warning: $(1) is too big"; \ + else if [ `stat -c%s $(3)` -gt $(4) ]; then \ + echo "Warning: $(3) is too big"; \ + else \ + ( dd if=$(1) bs=$(2) conv=sync; dd if=$(3) ) > $(5); \ + fi; fi +endef + +define Sysupgrade/KRuImage + $(call CatFiles,$(KDIR)/vmlinux-$(2).uImage,$(3),$(KDIR)/root.$(1),$(4),$(call sysupname,$(1),$(2))) +endef + +define mkmtd +mtdparts=$(1):$(2) +endef + +define mkmtd/phys +$(call mkmtd,physmap-flash.0,$(1)) +endef + +define mkmtd/spi +$(call mkmtd,spi0.0,$(1)) +endef + define Image/BuildKernel cp $(KDIR)/vmlinux.elf $(BIN_DIR)/$(VMLINUX).elf cp $(KDIR)/vmlinux $(BIN_DIR)/$(VMLINUX).bin $(call CompressLzma,$(KDIR)/vmlinux,$(KDIR)/vmlinux.bin.lzma) $(call MkImage,lzma,$(KDIR)/vmlinux.bin.lzma,$(KDIR)/uImage.lzma) cp $(KDIR)/uImage.lzma $(BIN_DIR)/$(UIMAGE).bin + $(call Image/Build/Initramfs) endef define BuildFirmware/Generic - $(call PatchKernelLzma,$(2),$(3) $($(4))) - $(call MkImage,lzma,"$(KDIR)/vmlinux-$(2).bin.lzma","$(KDIR)/vmlinux-$(2).uImage") - if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \ - echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \ - else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \ - echo "Warning: $(KDIR)/root.$(1) is too big"; \ - else \ - ( \ - dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(5) conv=sync; \ - dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \ - ) > $(call imgname,$(1),$(2))-sysupgrade.bin; \ - fi; fi + $(call MkImageLzma,$(2),$(3)) + $(call Sysupgrade/KRuImage,$(1),$(2),$(4),$(5)) +endef + +define BuildFirmware/Generic/initramfs + $(call MkImageLzma,$(2),$(3)) + $(CP) $(KDIR)/vmlinux-$(2).uImage $(call imgname,$(1),$(2))-uImage.bin +endef + +mtdlayout_4M=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware) +define BuildFirmware/GENERIC_4M + $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_4M)),917504,2949120) +endef + +define BuildFirmware/GENERIC_4M/initramfs + $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_4M))) +endef + +mtdlayout_8M=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),6976k(rootfs),7872k@0x50000(firmware) +kernel_size_8M=917504 +rootfs_size_8M=7143424 +define BuildFirmware/GENERIC_8M + $(call BuildFirmware/Generic,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_8M)),$(kernel_size_8M),$(rootfs_size_8M)) +endef + +define BuildFirmware/GENERIC_8M/initramfs + $(call BuildFirmware/Generic/initramfs,$(1),$(2),$(call mkcmdline,$(3),$(4),$(5)) $(call mkmtd/$(6),$(mtdlayout_8M))) +endef + +mtdlayout_argus_atp52b=192k(bootloader)ro,64k(config),64k(factory),1152k(kernel),6656k(rootfs),7808k@0x50000(firmware) +mtd_argus_atp52b_kernel_part_size=1179648 +mtd_argus_atp52b_rootfs_part_size=6815744 +define BuildFirmware/ARGUS_ATP52B + $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_argus_atp52b)),$(mtd_argus_atp52b_kernel_part_size),$(mtd_argus_atp52b_rootfs_part_size)) endef define BuildFirmware/Buffalo - $(call PatchKernelLzma,$(2),board=$(3) $($(4))) - $(call MkImage,lzma,"$(KDIR)/vmlinux-$(2).bin.lzma","$(KDIR)/vmlinux-$(2).uImage") - if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \ - echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \ - else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \ - echo "Warning: $(KDIR)/root.$(1) is too big"; \ - else \ + $(call MkImageLzma,$(2),$(3)) + $(call Sysupgrade/KRuImage,$(1),$(2),$(4),$(5)) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ buffalo-enc -p $(3) -v 1.76 \ -i $(KDIR)/vmlinux-$(2).uImage \ -o $(KDIR)/vmlinux-$(2).uImage.enc; \ @@ -86,239 +146,293 @@ define BuildFirmware/Buffalo -i $(KDIR)/vmlinux-$(2).uImage.enc \ -i $(KDIR)/root.$(2).enc \ -o $(call imgname,$(1),$(2))-factory-EU.bin; \ - fi; fi + fi endef + define BuildFirmware/Buffalo2 - $(call BuildFirmware/Generic,$(1),$(2),board=$(3),$($(4)),$(5),$(6)) + $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(4),$(5),$(6)) +endef + +mtdlayout_dir300b1=192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware) +mtd_dir300b1_kernel_part_size=917504 +mtd_dir300b1_rootfs_part_size=2949120 +define BuildFirmware/DIR300B1 + $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_dir300b1)),$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size)) + mkwrgimg -s $(4) -d /dev/mtdblock/2 \ + -i $(call sysupname,$(1),$(2)) \ + -o $(call imgname,$(1),$(2))-factory.bin endef +define BuildFirmware/DIR300B1/initramfs + $(call BuildFirmware/Generic/initramfs,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_dir300b1)),$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size)) +endef + +define BuildFirmware/Edimax + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ + mkedimaximg -i $(call sysupname,$(1),$(2)) \ + -o $(call imgname,$(1),$(2))-factory.bin \ + -s $(3) -m $(4) -f $(5) -S $(6); \ + fi +endef + +mtdlayout_f5d8235=320k(u-boot)ro,1536k(kernel),6208k(rootfs),64k(nvram),64k(factory),7744k@0x50000(firmware) +mtd_f5d8235_kernel_part_size=1572864 +mtd_f5d8235_rootfs_part_size=6356992 +define BuildFirmware/F5D8235 + $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_f5d8235)),$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size)) +endef + +define BuildFirmware/FONERA20N + $(call BuildFirmware/GENERIC_8M,$(1),fonera20n,FONERA20N,ttyS1,57600,phys) + $(call BuildFirmware/Edimax,$(1),fonera20n,RSDK,NL1T,0x50000,0xc0000) +endef + +mtdlayout_nw718=192k(u-boot)ro,128k(config)ro,64k(factory)ro,896k(kernel),2816k(rootfs),3712k@0x60000(firmware) +kernel_size_nw718=917504 +rootfs_size_nw718=2883584 +cmdline_nw718=$(call mkcmdline,NW718,ttyS1,57600) $(call mkmtd/spi,$(mtdlayout_nw718)) define BuildFirmware/NW718 - $(call PatchKernelLzma,$(2),$(3) $($(4))) + $(call BuildFirmware/Generic,$(1),$(2),$(cmdline_nw718),$(kernel_size_nw718),$(rootfs_size_nw718)) + $(call PatchKernelLzma,$(2),$(cmdline_nw718)) mkimage -A mips -O linux -T kernel -C lzma $(call kernel_entry) \ -n "ARA1B4NCRNW718;1" \ -d "$(KDIR)/vmlinux-$(2).bin.lzma" \ "$(KDIR)/vmlinux-$(2).uImage" - if [ `stat -c%s "$(KDIR)/vmlinux-$(2).uImage"` -gt $(5) ]; then \ - echo "Warning: $(KDIR)/vmlinux-$(2).uImage is too big"; \ - else if [ `stat -c%s $(KDIR)/root.$(1)` -gt $(6) ]; then \ - echo "Warning: $(KDIR)/root.$(1) is too big"; \ - else \ + $(call CatFiles,$(KDIR)/vmlinux-$(2).uImage,$(kernel_size_nw718),$(KDIR)/root.$(1),$(rootfs_size_nw718),$(call imgname,$(1),$(2))-factory.bin) +endef + +mtdlayout_rtg32b1=192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware) +mtd_rtg32b1_kernel_part_size=917504 +mtd_rtg32b1_rootfs_part_size=2949120 +define BuildFirmware/RTG32B1 + $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/spi,$(mtdlayout_rtg32b1)),$(mtd_rtg32b1_kernel_part_size),$(mtd_rtg32b1_rootfs_part_size)) +endef + +mtdlayout_rtn10plus=192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,896k(kernel),2880k(rootfs),3776k@0x50000(firmware) +mtd_rtn10plus_kernel_part_size=917504 +mtd_rtn10plus_rootfs_part_size=2949120 +define BuildFirmware/RTN10PLUS + $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_rtn10plus)),$(mtd_rtn10plus_kernel_part_size),$(mtd_rtn10plus_rootfs_part_size)) +endef + +mtdlayout_whrg300n=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,960k(kernel),2752k(rootfs),64k(user)ro,3712k@0x50000(firmware) +define BuildFirmware/WHRG300N + $(call Image/Build/Template/GENERIC_4M,$(1),whr-g300n,WHR-G300N,ttyS1,57600,phys) + $(call BuildFirmware/Buffalo,$(1),whr-g300n,$(call mkcmdline,WHR-G300N,ttyS1,57600) $(call mkmtd/phys,$(mtdlayout_whrg300n)),983040,3801088) + ( \ + echo -n -e "# Airstation FirmWare\nrun u_fw\nreset\n\n" | \ + dd bs=512 count=1 conv=sync; \ + dd if=$(call sysupname,$(1),whr-g300n); \ + ) > $(KDIR)/whr-g300n-tftp.tmp + buffalo-tftp -i $(KDIR)/whr-g300n-tftp.tmp \ + -o $(call imgname,$(1),whr-g300n)-tftp.bin +endef + +mtdlayout_wl341v3=128k(u-boot)ro,64k(board-nvram)ro,64k(u-boot-env)ro,896k(kernel),2880k(rootfs),64k(signature-eRcOmM),3776k@0x40000(firmware),4096k@0x0(fullflash) +kernel_size_wl341v3=917504 +rootfs_size_wl341v3=2949120 +define BuildFirmware/WL341V3 + $(call BuildFirmware/Generic,$(1),$(2),board=$(3) $(call mkmtd/phys,$(mtdlayout_wl341v3)),$(kernel_size_wl341v3),$(rootfs_size_wl341v3)) + if [ -e "$(call sysupname,$(1),$(2))" ]; then \ ( \ - dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(5) conv=sync; \ + dd if=/dev/zero bs=195936 count=1; \ + echo "1.01"; \ + dd if=/dev/zero bs=581 count=1; \ + echo -n -e "\x73\x45\x72\x43\x6F\x4D\x6D\x00\x01\x00\x00\x59\x4E\x37\x95\x58\x10\x00\x20\x00\x28\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x00\x11\x03\x00\x00\x80\x00\x00\x00\x00\x03\x00\x00\x10\x12\x00\x00\x00\x10\x73\x45\x72\x43\x6F\x4D\x6D"; \ + dd if=/dev/zero bs=65552 count=1; \ + dd if=$(KDIR)/vmlinux-$(2).uImage bs=$(kernel_size_wl341v3) conv=sync; \ dd if=$(KDIR)/root.$(1) bs=64k conv=sync; \ + dd if=/dev/zero bs=`expr 4194304 - 262144 - 16 - $(kernel_size_wl341v3) - \( \( \( \`stat -c%s $(KDIR)/root.$(1)\` / 65536 \) + 1 \) \* 65536 \)` count=1; \ + echo -n -e "\x11\x03\x80\x00\x10\x12\x90\xF7\x65\x52\x63\x4F\x6D\x4D\x00\x00"; \ ) > $(call imgname,$(1),$(2))-factory.bin; \ - fi; fi + fi endef -define BuildFirmware/Edimax - mkedimaximg -i $(call imgname,$(1),$(2))-sysupgrade.bin \ - -o $(call imgname,$(1),$(2))-factory.bin \ - -s $(3) -m $(4) -f $(5) -S $(6) +mtdlayout_wlitx4ag300n=192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,896k(kernel),2816k(rootfs),64k(user)ro,3712k@0x50000(firmware) +define BuildFirmware/WLITX4AG300N + $(call BuildFirmware/Buffalo2,$(1),wli-tx4-ag300n,WLI-TX4-AG300N,$(call mkmtd/phys,$(mtdlayout_wlitx4ag300n)),917504,2883584) endef -mtdlayout_4M=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware) -define Image/Build/Template/GENERIC_4M - $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_4M,851968,3014656) +# +# Templates +# +define Image/Build/Template/initramfs/initramfs + $(call BuildFirmware/$(1)/initramfs,initramfs,$(2),$(3),$(4),$(5),$(6),$(7),$(8)) endef -mtdlayout_8M=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),7040k(rootfs),7872k@0x50000(firmware) -kernel_size_8M=851968 -rootfs_size_8M=7208960 -define Image/Build/Template/GENERIC_8M - $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_8M,$(kernel_size_8M),$(rootfs_size_8M)) +define Image/Build/Template/squashfs-only/squashfs + $(call BuildFirmware/$(1),squashfs,$(2),$(3),$(4),$(5),$(6),$(7),$(8)) endef -mtdlayout_dir300b1=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware) -mtd_dir300b1_kernel_part_size=851968 -mtd_dir300b1_rootfs_part_size=3014656 -define Image/Build/Template/DIR300B1 - $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_dir300b1,$(mtd_dir300b1_kernel_part_size),$(mtd_dir300b1_rootfs_part_size)) - mkwrgimg -s $(4) -d /dev/mtdblock/2 \ - -i $(call imgname,$(1),$(2))-sysupgrade.bin \ - -o $(call imgname,$(1),$(2))-factory.bin +# +# RT288X Profiles +# +define Image/Build/Profile/F5D8235V1 + $(call Image/Build/Template/$(fs_squash)/$(1),F5D8235,f5d8235v1,F5D8235_V1) endef -mtdlayout_nw718=mtdparts=spi0.0:192k(u-boot)ro,128k(config)ro,64k(factory)ro,832k(kernel),2880k(rootfs),3712k@0x60000(firmware) -define Image/Build/Template/NW718 - $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_nw718,851968,2949120) - $(call BuildFirmware/NW718,$(1),$(2),board=$(3),mtdlayout_nw718,851968,2949120) +define Image/Build/Profile/RTN15 + $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,rt-n15,RT-N15,ttyS1,57600,phys) endef -console_OMNIEMB=ttyS1,57600 -mtdlayout_ONMIEMB=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,1024k(kernel),6848k(rootfs),7872k@0x50000(firmware) -define Image/Build/Template/OMNIEMB - $(call BuildFirmware/Generic,$(1),$(2),board=$(3) console=$(console_OMNIEMB),mtdlayout_OMNIEMB,1048576,7012352) +define Image/Build/Profile/V11STFE + $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,v11st-fe,V11ST-FE,ttyS1,57600,phys) endef -define Image/Build/Profile/DIR300B1 - $(call Image/Build/Template/DIR300B1,$(1),dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b) - $(call Image/Build/Template/DIR300B1,$(1),dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b) - $(call Image/Build/Template/DIR300B1,$(1),dir-600-b2,DIR-600-B2,wrgn23_dlwbr_dir600b) +define Image/Build/Profile/WLITX4AG300N + $(call Image/Build/Template/$(fs_squash)/$(1),WLITX4AG300N) +endef + +ifeq ($(CONFIG_RALINK_RT288X),y) +define Image/Build/Profile/Default + $(call Image/Build/Profile/F5D8235V1,$(1)) + $(call Image/Build/Profile/RTN15,$(1)) + $(call Image/Build/Profile/V11STFE,$(1)) + $(call Image/Build/Profile/WLITX4AG300N,$(1)) endef +endif -mtdlayout_rtg32b1=mtdparts=spi0.0:192k(u-boot)ro,64k(devdata)ro,64k(devconf)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware) -mtd_rtg32b1_kernel_part_size=851968 -mtd_rtg32b1_rootfs_part_size=3014656 -define Image/Build/Template/RTG32B1 - $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_rtg32b1,$(mtd_rtg32b1_kernel_part_size),$(mtd_rtg32b1_rootfs_part_size)) +# +# RT305X Profiles +# +define Image/Build/Profile/ALL0256N + $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,all0256n,ALL0256N,ttyS1,57600,spi) endef -define Image/Build/Profile/RTG32B1 - $(call Image/Build/Template/RTG32B1,$(1),rt-g32-b1,RT-G32-B1) +define Image/Build/Profile/ARGUS_ATP52B + $(call Image/Build/Template/$(fs_squash)/$(1),ARGUS_ATP52B,argus_atp52b,ARGUS_ATP52B) +endef + +define Image/Build/Profile/BC2 + $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,bc2,BC2,ttyS1,57600,phys) +endef + +define Image/Build/Profile/DIR300B1 + $(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-300-b1,DIR-300-B1,wrgn23_dlwbr_dir300b) + $(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-600-b1,DIR-600-B1,wrgn23_dlwbr_dir600b) + $(call Image/Build/Template/$(fs_squash)/$(1),DIR300B1,dir-600-b2,DIR-600-B2,wrgn23_dlwbr_dir600b) endef define Image/Build/Profile/ESR9753 - $(call Image/Build/Template/GENERIC_4M,$(1),esr-9753,ESR-9753) + $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,esr-9753,ESR-9753,ttyS1,57600,phys) endef -define Image/Build/Profile/FONERA20N - $(call Image/Build/Template/GENERIC_8M,$(1),fonera20n,FONERA20N) - $(call BuildFirmware/Edimax,$(1),fonera20n,RSDK,NL1T,0x50000,0xc0000) +define Image/Build/Profile/HW5503G + $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,hw550-3g,HW550-3G,ttyS1,57600,phys) endef -define Image/Build/Profile/BC2 - $(call Image/Build/Template/GENERIC_8M,$(1),bc2,BC2) +define Image/Build/Profile/F5D8235V2 + $(call Image/Build/Template/$(fs_squash)/$(1),F5D8235,f5d8235v2,F5D8235_V2) endef -define Image/Build/Profile/ALL0256N - $(call Image/Build/Template/GENERIC_4M,$(1),all0256n,ALL0256N) +define Image/Build/Profile/FONERA20N + $(call Image/Build/Template/$(fs_squash)/$(1),FONERA20N) endef -define Image/Build/Profile/NBG419N - $(call Image/Build/Template/GENERIC_4M,$(1),nbg-419n,NBG-419N) +define Image/Build/Profile/MOFI35003GN + $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,mofi3500-3gn,MOFI3500-3GN,ttyS1,57600,phys) endef -define Image/Build/Profile/WL351 - $(call Image/Build/Template/GENERIC_4M,$(1),wl-351,WL-351) +define Image/Build/Profile/NBG419N + $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,nbg-419n,NBG419N,ttyS1,57600,phys) endef define Image/Build/Profile/NW718 - $(call Image/Build/Template/NW718,$(1),nw718,NW718) + $(call Image/Build/Template/$(fs_squash)/$(1),NW718,nw718) endef define Image/Build/Profile/OMNIEMB - $(call Image/Build/Template/OMNIEMB,$(1),omni-emb,OMNI-EMB) + $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,omni-emb,OMNI-EMB,ttyS1,57600,phys) endef define Image/Build/Profile/PWH2004 - $(call Image/Build/Template/GENERIC_8M,$(1),pwh2004,PWH2004) + $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,pwh2004,PWH2004,ttyS1,57600,phys) endef -define Image/Build/Profile/V22RW2X2 - $(call Image/Build/Template/GENERIC_4M,$(1),v22rw-2x2,V22RW-2X2) -endef - -mtdlayout_whrg300n=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,960k(kernel),2752k(rootfs),64k(user)ro,3712k@0x50000(firmware) -define Image/Build/Profile/WHRG300N - $(call Image/Build/Template/GENERIC_4M,$(1),whr-g300n,WHR-G300N) - $(call BuildFirmware/Buffalo,$(1),whr-g300n,WHR-G300N,mtdlayout_whrg300n,983040,3801088) - ( \ - echo -n -e "# Airstation FirmWare\nrun u_fw\nreset\n\n" | \ - dd bs=512 count=1 conv=sync; \ - dd if=$(call imgname,$(1),whr-g300n)-sysupgrade.bin; \ - ) > $(KDIR)/whr-g300n-tftp.tmp - buffalo-tftp -i $(KDIR)/whr-g300n-tftp.tmp \ - -o $(call imgname,$(1),whr-g300n)-tftp.bin +define Image/Build/Profile/RTG32B1 + $(call Image/Build/Template/$(fs_squash)/$(1),RTG32B1,rt-g32-b1,RT-G32-B1) endef -define Image/Build/Profile/HW5503G - $(call Image/Build/Template/GENERIC_8M,$(1),hw550-3g,HW550-3G) +define Image/Build/Profile/RTN10PLUS + $(call Image/Build/Template/$(fs_squash)/$(1),RTN10PLUS,rt-n10-plus,RT-N10-PLUS) endef -define Image/Build/Profile/MOFI35003GN - $(call Image/Build/Template/GENERIC_8M,$(1),mofi3500-3gn,MOFI3500-3GN) +define Image/Build/Profile/SLR7205 + $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,sl-r7205,SL-R7205,ttyS1,57600,phys) endef -define Image/Build/Profile/WCR150GN - $(call Image/Build/Template/GENERIC_4M,$(1),wcr150gn,WCR150GN) +define Image/Build/Profile/V22RW2X2 + $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,v22rw-2x2,V22RW-2X2,ttyS1,57600,phys) endef -w502u_cmdline=board=W502U console=ttyS1,115200 define Image/Build/Profile/W502U - $(call BuildFirmware/Generic,$(1),w502u,$(w502u_cmdline),mtdlayout_8M,$(kernel_size_8M),$(rootfs_size_8M)) + $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,w502u,W502U,ttyS1,115200,phys) endef -mtdlayout_argus_atp52b=mtdparts=physmap-flash.0:192k(bootloader)ro,64k(config),64k(factory),1152k(kernel),6656k(rootfs),7808k@0x50000(firmware) -mtd_argus_atp52b_kernel_part_size=1179648 -mtd_argus_atp52b_rootfs_part_size=6815744 -define Image/Build/Template/ARGUS_ATP52B - $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_argus_atp52b,$(mtd_argus_atp52b_kernel_part_size),$(mtd_argus_atp52b_rootfs_part_size)) +define Image/Build/Profile/WCR150GN + $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wcr150gn,WCR150GN,ttyS1,57600,phys) endef -define Image/Build/Profile/ARGUS_ATP52B - $(call Image/Build/Template/ARGUS_ATP52B,$(1),argus_atp52b,ARGUS_ATP52B) +define Image/Build/Profile/WHRG300N + $(call Image/Build/Template/$(fs_squashfs)/$(1),WHRG300N) endef -mtdlayout_f5d8235=mtdparts=physmap-flash.0:320k(u-boot)ro,1536k(kernel),6208k(rootfs),64k(nvram),64k(factory),7744k@0x50000(firmware) -mtd_f5d8235_kernel_part_size=1572864 -mtd_f5d8235_rootfs_part_size=6356992 -define Image/Build/Template/F5D8235V2 - $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_f5d8235,$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size)) +define Image/Build/Profile/WL341V3 + $(call Image/Build/Template/$(fs_squash)/$(1),WL341V3,wl341v3,WL341V3) endef -define Image/Build/Profile/F5D8235V2 - $(call Image/Build/Template/F5D8235V2,$(1),f5d8235v2,F5D8235_V2) +define Image/Build/Profile/WL351 + $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wl-351,WL-351,ttyS1,57600,phys) endef -define Image/Build/Template/F5D8235V1 - $(call BuildFirmware/Generic,$(1),$(2),board=$(3),mtdlayout_f5d8235,$(mtd_f5d8235_kernel_part_size),$(mtd_f5d8235_rootfs_part_size)) +define Image/Build/Profile/WR5123GN + $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,wr512-3gn-4M,WR512-3GN,ttyS1,57600,phys) + $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,wr512-3gn-8M,WR512-3GN,ttyS1,57600,phys) endef +define Image/Build/Profile/WR6202 + $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_8M,wr6202,WR6202,ttyS1,115200,phys) +endef -mtdlayout_wr5123gn=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2944k(rootfs),3776k@0x50000(firmware) -mtdlayout_wr5123gn8m=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),7040k(rootfs),7872k@0x50000(firmware) -define Image/Build/Profile/WR5123GN - $(call BuildFirmware/Generic,$(1),wr512-3gn-4M,board="WR512-3GN",mtdlayout_wr5123gn,851968,3014656) - $(call BuildFirmware/Generic,$(1),wr512-3gn-8M,board="WR512-3GN",mtdlayout_wr5123gn8m,851968,7208960) +define Image/Build/Profile/XDXRN502J + $(call Image/Build/Template/$(fs_squash)/$(1),GENERIC_4M,xdxrn502j,XDXRN502J,ttyS1,57600,phys) endef ifeq ($(CONFIG_RALINK_RT305X),y) define Image/Build/Profile/Default + $(call Image/Build/Profile/ALL0256N,$(1)) $(call Image/Build/Profile/ARGUS_ATP52B,$(1)) $(call Image/Build/Profile/BC2,$(1)) - $(call Image/Build/Profile/ALL0256N,$(1)) $(call Image/Build/Profile/DIR300B1,$(1)) $(call Image/Build/Profile/ESR9753,$(1)) - $(call Image/Build/Profile/RTG32B1,$(1)) + $(call Image/Build/Profile/F5D8235V2,$(1)) + $(call Image/Build/Profile/RTN10PLUS,$(1)) $(call Image/Build/Profile/FONERA20N,$(1)) - $(call Image/Build/Profile/V22RW2X2,$(1)) + $(call Image/Build/Profile/HW5503G,$(1)) + $(call Image/Build/Profile/MOFI35003GN,$(1)) $(call Image/Build/Profile/NBG419N,$(1)) $(call Image/Build/Profile/NW718,$(1)) $(call Image/Build/Profile/OMNIEMB,$(1)) $(call Image/Build/Profile/PWH2004,$(1)) - $(call Image/Build/Profile/WHRG300N,$(1)) - $(call Image/Build/Profile/WCR150GN,$(1)) - $(call Image/Build/Profile/F5D8235V2,$(1)) - $(call Image/Build/Profile/HW5503G,$(1)) - $(call Image/Build/Profile/MOFI35003GN,$(1)) + $(call Image/Build/Profile/RTG32B1,$(1)) + $(call Image/Build/Profile/SLR7205,$(1)) + $(call Image/Build/Profile/V22RW2X2,$(1)) $(call Image/Build/Profile/W502U,$(1)) - $(call Image/Build/Profile/WR5123GN,$(1)) + $(call Image/Build/Profile/WCR150GN,$(1)) + $(call Image/Build/Profile/WHRG300N,$(1)) + $(call Image/Build/Profile/WL341V3,$(1)) $(call Image/Build/Profile/WL351,$(1)) + $(call Image/Build/Profile/WR5123GN,$(1)) + $(call Image/Build/Profile/WR6202,$(1)) + $(call Image/Build/Profile/XDXRN502J,$(1)) endef endif -define Image/Build/Profile/F5D8235V1 - $(call Image/Build/Template/F5D8235V1,$(1),f5d8235v1,F5D8235_V1) +define Image/Build/Initramfs + $(call Image/Build/Profile/$(PROFILE),initramfs) endef -define Image/Build/Profile/RTN15 - $(call Image/Build/Template/GENERIC_4M,$(1),rt-n15,RT-N15) -endef - -mtdlayout_wlitx4ag300n=mtdparts=physmap-flash.0:192k(u-boot)ro,64k(u-boot-env)ro,64k(factory)ro,832k(kernel),2880k(rootfs),64k(user)ro,3712k@0x50000(firmware) -define Image/Build/Profile/WLITX4AG300N - $(call BuildFirmware/Buffalo2,$(1),wli-tx4-ag300n,WLI-TX4-AG300N,mtdlayout_wlitx4ag300n,851968,2949120) -endef - -ifeq ($(CONFIG_RALINK_RT288X),y) -define Image/Build/Profile/Default - $(call Image/Build/Profile/F5D8235V1,$(1)) - $(call Image/Build/Profile/RTN15,$(1)) - $(call Image/Build/Profile/WLITX4AG300N,$(1)) -endef -endif - define Image/Build/squashfs $(call prepare_generic_squashfs,$(KDIR)/root.squashfs) endef