X-Git-Url: https://git.rohieb.name/openwrt.git/blobdiff_plain/fe81993ab10a0e94d88d241cd47200011e917f59..b10a5d4260b7695a601bcc6d1987c2d1e41c0a86:/openwrt/target/linux/package/diag/diag_led.c

diff --git a/openwrt/target/linux/package/diag/diag_led.c b/openwrt/target/linux/package/diag/diag_led.c
index cc2bc8a24..6ad7ff102 100644
--- a/openwrt/target/linux/package/diag/diag_led.c
+++ b/openwrt/target/linux/package/diag/diag_led.c
@@ -28,6 +28,7 @@
  * 2005/03/14 asus wl-500g deluxe and buffalo v2 support added
  * 2005/04/13 added licensing informations
  * 2005/04/18 base reset polarity off initial readings
+ * 2006/02/07 motorola wa840g/we800g support added
  */
 
 #include <linux/module.h>
@@ -36,6 +37,7 @@
 #include <linux/sysctl.h>
 #include <asm/io.h>
 #include <typedefs.h>
+#include <osl.h>
 #include <bcmdevs.h>
 #include <sbutils.h>
 
@@ -47,9 +49,9 @@ static void *sbh;
 #define DMZ_GPIO  (1<<7)
 
 static void set_gpio(uint32 mask, uint32 value) {
-	sb_gpiocontrol(sbh,mask,0);
-	sb_gpioouten(sbh,mask,mask);
-	sb_gpioout(sbh,mask,value);
+	sb_gpiocontrol(sbh,mask, 0, GPIO_DRV_PRIORITY);
+	sb_gpioouten(sbh,mask,mask,GPIO_DRV_PRIORITY);
+	sb_gpioout(sbh,mask,value,GPIO_DRV_PRIORITY);
 }
 
 static void v2_set_diag(u8 state) {
@@ -78,6 +80,13 @@ static void v1_set_dmz(u8 state) {
 	}
 }
 
+static void wap1_set_diag(u8 state) {
+       set_gpio(1<<3,state);
+}
+static void wap1_set_dmz(u8 state) {
+       set_gpio(1<<4,state);
+}
+
 // - - - - -
 static void ignore(u8 ignored) {};
 
@@ -122,8 +131,8 @@ static int proc_reset(ctl_table *table, int write, struct file *filp,
 {
 
 	if (reset_gpio) {
-		sb_gpiocontrol(sbh,reset_gpio,reset_gpio);
-		sb_gpioouten(sbh,reset_gpio,0);
+		sb_gpiocontrol(sbh,reset_gpio,reset_gpio,GPIO_DRV_PRIORITY);
+		sb_gpioouten(sbh,reset_gpio,0,GPIO_DRV_PRIORITY);
 		reset=!(sb_gpioin(sbh)&reset_gpio);
 
 		if (reset_polarity) reset=!reset;
@@ -170,10 +179,10 @@ static int __init diag_init()
 	set_diag=ignore;
 	set_dmz=ignore;
 	
-	buf=nvram_get("boardrev");
-	if (((board_type & 0xf00) == 0x400) && strcmp(buf,"0x10")) {
+	buf=nvram_get("pmon_ver") ?: "";
+	if (((board_type & 0xf00) == 0x400) && (strncmp(buf, "CFE", 3) != 0)) {
 		buf=nvram_get("boardtype")?:"";
-		if (!strcmp(buf,"bcm94710dev")) {
+		if (!strncmp(buf,"bcm94710dev",11)) {
 			buf=nvram_get("boardnum")?:"";
 			if (!strcmp(buf,"42")) {
 				// wrt54g v1.x
@@ -181,10 +190,24 @@ static int __init diag_init()
 				set_dmz=v1_set_dmz;
 				reset_gpio=(1<<6);
 			}
+			if (simple_strtoul(buf, NULL, 0) == 2) {
+				// wap54g v1.0
+				// do not use strcmp as PMON v5.3.22 has some built-in nvram 
+				// defaults with trailing \r
+				set_diag=wap1_set_diag;
+				// no dmz led on wap54g, used green led 
+				// labeled "WLAN Link" instead
+				set_dmz=wap1_set_dmz;
+				reset_gpio=(1<<0);
+			}
 			if (!strcmp(buf,"asusX")) {
 				//asus wl-500g
 				reset_gpio=(1<<6);
 			}
+			if (!strcmp(buf,"2")) {
+				//wa840g v1 / we800g v1
+				reset_gpio=(1<<0);
+			}
 		}
 		if (!strcmp(buf,"bcm94710ap")) {
 			buf=nvram_get("boardnum")?:"";
@@ -222,8 +245,8 @@ static int __init diag_init()
 	}
 
 	
-	sb_gpiocontrol(sbh,reset_gpio,reset_gpio);
-	sb_gpioouten(sbh,reset_gpio,0);
+	sb_gpiocontrol(sbh,reset_gpio,reset_gpio,GPIO_DRV_PRIORITY);
+	sb_gpioouten(sbh,reset_gpio,0,GPIO_DRV_PRIORITY);
 	reset_polarity=!(sb_gpioin(sbh)&reset_gpio);
 
 	diag_sysctl_header = register_sysctl_table(sys_diag, 0);