AP96: Fix LAN/WAN setup

LAN (eth0) is behind a switch and the fixed speed/duplex was
supposed to be for it, not WAN (eth1).

Signed-off-by: Jouni Malinen <jouni.malinen@atheros.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@23147 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap96.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap96.c
index 6a7b6ff..c5b2d3a 100644 (file)
--- a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap96.c
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ap96.c
@@ -134,22 +134,26 @@ static struct gpio_button ap96_gpio_buttons[] __initdata = {
        }
 };
 
+#define AP96_WAN_PHYMASK 0x10
+#define AP96_LAN_PHYMASK 0x0f
+
 static void __init ap96_setup(void)
 {
        u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
 
-       ar71xx_add_device_mdio(0xfffffffe);
+       ar71xx_add_device_mdio(~(AP96_WAN_PHYMASK | AP96_LAN_PHYMASK));
 
        ar71xx_init_mac(ar71xx_eth0_data.mac_addr, art, 0);
        ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-       ar71xx_eth0_data.phy_mask = 0x1;
+       ar71xx_eth0_data.phy_mask = AP96_LAN_PHYMASK;
+       ar71xx_eth0_data.speed = SPEED_1000;
+       ar71xx_eth0_data.duplex = DUPLEX_FULL;
 
        ar71xx_add_device_eth(0);
 
        ar71xx_init_mac(ar71xx_eth1_data.mac_addr, art, 1);
        ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
-       ar71xx_eth1_data.speed = SPEED_1000;
-       ar71xx_eth1_data.duplex = DUPLEX_FULL;
+       ar71xx_eth1_data.phy_mask = AP96_WAN_PHYMASK;
 
        ar71xx_eth1_pll_data.pll_1000 = 0x1f000000;