+++ /dev/null
-CONFIG_32BIT=y
-# CONFIG_64BIT is not set
-# CONFIG_8139TOO is not set
-# CONFIG_ARCH_HAS_ILOG2_U32 is not set
-# CONFIG_ARCH_HAS_ILOG2_U64 is not set
-CONFIG_ARCH_POPULATES_NODE_MAP=y
-# CONFIG_ARCH_SUPPORTS_MSI is not set
-CONFIG_ARCH_SUPPORTS_OPROFILE=y
-# CONFIG_ATM is not set
-# CONFIG_AX25 is not set
-CONFIG_BASE_SMALL=0
-# CONFIG_BCM47XX is not set
-CONFIG_BITREVERSE=y
-CONFIG_BLK_DEV_CF_MIPS=y
-# CONFIG_BOOT_PRINTK_DELAY is not set
-# CONFIG_BT is not set
-CONFIG_CEVT_R4K=y
-# CONFIG_CPU_BIG_ENDIAN is not set
-CONFIG_CPU_HAS_LLSC=y
-CONFIG_CPU_HAS_PREFETCH=y
-CONFIG_CPU_HAS_SYNC=y
-CONFIG_CPU_LITTLE_ENDIAN=y
-# CONFIG_CPU_LOONGSON2 is not set
-CONFIG_CPU_MIPS32=y
-CONFIG_CPU_MIPS32_R1=y
-# CONFIG_CPU_MIPS32_R2 is not set
-# CONFIG_CPU_MIPS64_R1 is not set
-# CONFIG_CPU_MIPS64_R2 is not set
-CONFIG_CPU_MIPSR1=y
-# CONFIG_CPU_NEVADA is not set
-# CONFIG_CPU_R10000 is not set
-# CONFIG_CPU_R3000 is not set
-# CONFIG_CPU_R4300 is not set
-# CONFIG_CPU_R4X00 is not set
-# CONFIG_CPU_R5000 is not set
-# CONFIG_CPU_R5432 is not set
-# CONFIG_CPU_R6000 is not set
-# CONFIG_CPU_R8000 is not set
-# CONFIG_CPU_RM7000 is not set
-# CONFIG_CPU_RM9000 is not set
-# CONFIG_CPU_SB1 is not set
-CONFIG_CPU_SUPPORTS_32BIT_KERNEL=y
-CONFIG_CPU_SUPPORTS_HIGHMEM=y
-# CONFIG_CPU_TX39XX is not set
-# CONFIG_CPU_TX49XX is not set
-# CONFIG_CPU_VR41XX is not set
-CONFIG_CSRC_R4K=y
-# CONFIG_DEBUG_DEVRES is not set
-# CONFIG_DEBUG_DRIVER is not set
-# CONFIG_DEBUG_INFO is not set
-CONFIG_DEBUG_KERNEL=y
-# CONFIG_DEBUG_KOBJECT is not set
-# CONFIG_DEBUG_LIST is not set
-# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set
-# CONFIG_DEBUG_LOCK_ALLOC is not set
-# CONFIG_DEBUG_MUTEXES is not set
-# CONFIG_DEBUG_RT_MUTEXES is not set
-# CONFIG_DEBUG_SG is not set
-# CONFIG_DEBUG_SHIRQ is not set
-# CONFIG_DEBUG_SLAB is not set
-# CONFIG_DEBUG_SPINLOCK is not set
-# CONFIG_DEBUG_SPINLOCK_SLEEP is not set
-# CONFIG_DEBUG_STACK_USAGE is not set
-# CONFIG_DEBUG_VM is not set
-# CONFIG_DETECT_SOFTLOCKUP is not set
-CONFIG_DEVPORT=y
-# CONFIG_DM9000 is not set
-CONFIG_DMA_NEED_PCI_MAP_STATE=y
-CONFIG_DMA_NONCOHERENT=y
-CONFIG_EXT2_FS=y
-# CONFIG_FAULT_INJECTION is not set
-CONFIG_FORCED_INLINING=y
-CONFIG_FS_POSIX_ACL=y
-CONFIG_GENERIC_CLOCKEVENTS=y
-CONFIG_GENERIC_CLOCKEVENTS_BUILD=y
-CONFIG_GENERIC_CMOS_UPDATE=y
-CONFIG_GENERIC_FIND_NEXT_BIT=y
-CONFIG_GENERIC_GPIO=y
-# CONFIG_GENERIC_HARDIRQS_NO__DO_IRQ is not set
-CONFIG_HAS_DMA=y
-CONFIG_HAS_IOMEM=y
-CONFIG_HAS_IOPORT=y
-# CONFIG_HID is not set
-CONFIG_HID_SUPPORT=y
-# CONFIG_HIGH_RES_TIMERS is not set
-CONFIG_HW_HAS_PCI=y
-CONFIG_HW_RANDOM=y
-# CONFIG_I2C is not set
-# CONFIG_IBM_NEW_EMAC_EMAC4 is not set
-# CONFIG_IBM_NEW_EMAC_RGMII is not set
-# CONFIG_IBM_NEW_EMAC_TAH is not set
-# CONFIG_IBM_NEW_EMAC_ZMII is not set
-# CONFIG_IDE is not set
-CONFIG_INITRAMFS_SOURCE=""
-CONFIG_INPUT=y
-CONFIG_INPUT_KEYBOARD=y
-CONFIG_IRQ_CPU=y
-CONFIG_KALLSYMS=y
-CONFIG_KALLSYMS_ALL=y
-CONFIG_KALLSYMS_EXTRA_PASS=y
-CONFIG_KEXEC=y
-# CONFIG_KEYBOARD_ATKBD is not set
-CONFIG_KEYBOARD_GPIO=y
-# CONFIG_KEYBOARD_LKKBD is not set
-# CONFIG_KEYBOARD_NEWTON is not set
-# CONFIG_KEYBOARD_STOWAWAY is not set
-# CONFIG_KEYBOARD_SUNKBD is not set
-# CONFIG_KEYBOARD_XTKBD is not set
-CONFIG_KORINA=y
-CONFIG_LEDS_RB500=y
-# CONFIG_LEMOTE_FULONG is not set
-# CONFIG_LOCK_STAT is not set
-# CONFIG_MACH_ALCHEMY is not set
-# CONFIG_MACH_DECSTATION is not set
-# CONFIG_MACH_JAZZ is not set
-# CONFIG_MACH_VR41XX is not set
-CONFIG_MIKROTIK_RB500=y
-# CONFIG_MINI_FO is not set
-CONFIG_MIPS=y
-# CONFIG_MIPS_ATLAS is not set
-# CONFIG_MIPS_COBALT is not set
-CONFIG_MIPS_L1_CACHE_SHIFT=4
-# CONFIG_MIPS_MALTA is not set
-CONFIG_MIPS_MT_DISABLED=y
-# CONFIG_MIPS_MT_SMP is not set
-# CONFIG_MIPS_MT_SMTC is not set
-# CONFIG_MIPS_SEAD is not set
-# CONFIG_MIPS_SIM is not set
-# CONFIG_MIPS_UNCACHED is not set
-CONFIG_MTD=y
-# CONFIG_MTD_ABSENT is not set
-# CONFIG_MTD_ALAUDA is not set
-CONFIG_MTD_BLKDEVS=y
-CONFIG_MTD_BLOCK=y
-CONFIG_MTD_BLOCK2MTD=y
-# CONFIG_MTD_CFI is not set
-CONFIG_MTD_CFI_I1=y
-CONFIG_MTD_CFI_I2=y
-# CONFIG_MTD_CFI_I4 is not set
-# CONFIG_MTD_CFI_I8 is not set
-CONFIG_MTD_CHAR=y
-# CONFIG_MTD_CMDLINE_PARTS is not set
-# CONFIG_MTD_COMPLEX_MAPPINGS is not set
-# CONFIG_MTD_CONCAT is not set
-# CONFIG_MTD_DEBUG is not set
-# CONFIG_MTD_DOC2000 is not set
-# CONFIG_MTD_DOC2001 is not set
-# CONFIG_MTD_DOC2001PLUS is not set
-# CONFIG_MTD_JEDECPROBE is not set
-CONFIG_MTD_MAP_BANK_WIDTH_1=y
-# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_2=y
-# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set
-CONFIG_MTD_MAP_BANK_WIDTH_4=y
-# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set
-# CONFIG_MTD_MTDRAM is not set
-CONFIG_MTD_NAND=y
-# CONFIG_MTD_NAND_CAFE is not set
-# CONFIG_MTD_NAND_DISKONCHIP is not set
-# CONFIG_MTD_NAND_ECC_SMC is not set
-CONFIG_MTD_NAND_IDS=y
-# CONFIG_MTD_NAND_MUSEUM_IDS is not set
-# CONFIG_MTD_NAND_NANDSIM is not set
-CONFIG_MTD_NAND_PLATFORM=y
-CONFIG_MTD_NAND_VERIFY_WRITE=y
-# CONFIG_MTD_ONENAND is not set
-CONFIG_MTD_PARTITIONS=y
-# CONFIG_MTD_PHRAM is not set
-# CONFIG_MTD_PLATRAM is not set
-# CONFIG_MTD_PMC551 is not set
-# CONFIG_MTD_RAM is not set
-# CONFIG_MTD_REDBOOT_PARTS is not set
-# CONFIG_MTD_ROM is not set
-# CONFIG_MTD_SLRAM is not set
-# CONFIG_NATSEMI is not set
-# CONFIG_NE2K_PCI is not set
-# CONFIG_NET_SCH_ESFQ_NFCT is not set
-# CONFIG_NET_VENDOR_3COM is not set
-CONFIG_NF_CONNTRACK=y
-# CONFIG_NO_IOPORT is not set
-# CONFIG_PAGE_SIZE_16KB is not set
-CONFIG_PAGE_SIZE_4KB=y
-# CONFIG_PAGE_SIZE_64KB is not set
-# CONFIG_PAGE_SIZE_8KB is not set
-CONFIG_PCI=y
-# CONFIG_PCIPCWATCHDOG is not set
-# CONFIG_PCI_DEBUG is not set
-CONFIG_PCI_DOMAINS=y
-# CONFIG_PMC_MSP is not set
-# CONFIG_PMC_YOSEMITE is not set
-# CONFIG_PNX8550_JBS is not set
-# CONFIG_PNX8550_STB810 is not set
-# CONFIG_PROVE_LOCKING is not set
-CONFIG_RC32434_WDT=y
-# CONFIG_RCU_TORTURE_TEST is not set
-# CONFIG_RTC is not set
-CONFIG_RTC_LIB=y
-# CONFIG_RT_MUTEX_TESTER is not set
-# CONFIG_RUNTIME_DEBUG is not set
-CONFIG_RWSEM_GENERIC_SPINLOCK=y
-# CONFIG_SCHEDSTATS is not set
-# CONFIG_SCHED_DEBUG is not set
-CONFIG_SCHED_NO_NO_OMIT_FRAME_POINTER=y
-# CONFIG_SCSI_WAIT_SCAN is not set
-# CONFIG_SERIAL_8250_EXTENDED is not set
-# CONFIG_SGI_IP22 is not set
-# CONFIG_SGI_IP27 is not set
-# CONFIG_SGI_IP32 is not set
-# CONFIG_SIBYTE_BIGSUR is not set
-# CONFIG_SIBYTE_CARMEL is not set
-# CONFIG_SIBYTE_CRHINE is not set
-# CONFIG_SIBYTE_CRHONE is not set
-# CONFIG_SIBYTE_LITTLESUR is not set
-# CONFIG_SIBYTE_PTSWARM is not set
-# CONFIG_SIBYTE_RHONE is not set
-# CONFIG_SIBYTE_SENTOSA is not set
-# CONFIG_SIBYTE_SWARM is not set
-CONFIG_SLABINFO=y
-# CONFIG_SOFT_WATCHDOG is not set
-# CONFIG_SOUND is not set
-# CONFIG_SPARSEMEM_STATIC is not set
-# CONFIG_SPARSEMEM_VMEMMAP_ENABLE is not set
-CONFIG_SSB_POSSIBLE=y
-CONFIG_SWAP_IO_SPACE=y
-CONFIG_SYSVIPC_SYSCTL=y
-CONFIG_SYS_HAS_CPU_MIPS32_R1=y
-CONFIG_SYS_SUPPORTS_32BIT_KERNEL=y
-CONFIG_SYS_SUPPORTS_ARBIT_HZ=y
-CONFIG_SYS_SUPPORTS_LITTLE_ENDIAN=y
-# CONFIG_TC35815 is not set
-# CONFIG_TICK_ONESHOT is not set
-# CONFIG_TIMER_STATS is not set
-# CONFIG_TOSHIBA_JMR3927 is not set
-# CONFIG_TOSHIBA_RBTX4927 is not set
-# CONFIG_TOSHIBA_RBTX4938 is not set
-CONFIG_TRAD_SIGNALS=y
-# CONFIG_USB is not set
-# CONFIG_USBPCWATCHDOG is not set
-# CONFIG_USB_EHCI_HCD is not set
-# CONFIG_USB_UHCI_HCD is not set
-# CONFIG_USER_NS is not set
-# CONFIG_VGASTATE is not set
-CONFIG_VIA_RHINE=y
-# CONFIG_VIA_RHINE_MMIO is not set
-CONFIG_VIA_RHINE_NAPI=y
-# CONFIG_YAFFS_9BYTE_TAGS is not set
-CONFIG_YAFFS_ALWAYS_CHECK_CHUNK_ERASED=y
-CONFIG_YAFFS_AUTO_YAFFS2=y
-CONFIG_YAFFS_CHECKPOINT_RESERVED_BLOCKS=0
-# CONFIG_YAFFS_DISABLE_LAZY_LOAD is not set
-# CONFIG_YAFFS_DISABLE_WIDE_TNODES is not set
-CONFIG_YAFFS_DOES_ECC=y
-CONFIG_YAFFS_ECC_WRONG_ORDER=y
-CONFIG_YAFFS_FS=y
-CONFIG_YAFFS_SHORT_NAMES_IN_RAM=y
-CONFIG_YAFFS_YAFFS1=y
-CONFIG_YAFFS_YAFFS2=y
-CONFIG_ZONE_DMA_FLAG=0
+++ /dev/null
-/*
- * Copyright 2001 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * stevel@mvista.com or source@mvista.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/pci.h>
-#include <asm/io.h>
-
-#include <asm/rc32434/rc32434.h>
-
-static int __devinitdata irq_map[2][12] = {
- { 0, 0, 2, 3, 2, 3, 0, 0, 0, 0, 0, 1 },
- { 0, 0, 1, 3, 0, 2, 1, 3, 0, 2, 1, 3 }
-};
-
-int __init pcibios_map_irq(const struct pci_dev *dev, u8 slot, u8 pin)
-{
- int irq = 0;
-
- if (dev->bus->number < 2 && PCI_SLOT(dev->devfn) < 12) {
- irq = irq_map[dev->bus->number][PCI_SLOT(dev->devfn)];
- }
- return irq + GROUP4_IRQ_BASE + 4;
-}
-
+++ /dev/null
-/**************************************************************************
- *
- * BRIEF MODULE DESCRIPTION
- * pci_ops for IDT EB434 board
- *
- * Copyright 2004 IDT Inc. (rischelp@idt.com)
- * Copyright 2006 Felix Fietkau <nbd@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- **************************************************************************
- * May 2004 rkt, neb
- *
- * Initial Release
- *
- *
- *
- **************************************************************************
- */
-
-#include <linux/autoconf.h>
-#include <linux/init.h>
-#include <linux/pci.h>
-#include <linux/types.h>
-#include <linux/delay.h>
-
-#include <asm/cpu.h>
-#include <asm/io.h>
-
-#include <asm/rc32434/rc32434.h>
-#include <asm/rc32434/pci.h>
-
-#define PCI_ACCESS_READ 0
-#define PCI_ACCESS_WRITE 1
-
-
-#define PCI_CFG_SET(bus,slot,func,off) \
- (rc32434_pci->pcicfga = (0x80000000 | \
- ((bus) << 16) | ((slot)<<11) | \
- ((func)<<8) | (off)))
-
-static inline int config_access(unsigned char access_type, struct pci_bus *bus,
- unsigned int devfn, unsigned char where,
- u32 * data)
-{
- unsigned int slot = PCI_SLOT(devfn);
- u8 func = PCI_FUNC(devfn);
-
- /* Setup address */
- PCI_CFG_SET(bus->number, slot, func, where);
- rc32434_sync();
-
- if (access_type == PCI_ACCESS_WRITE)
- rc32434_pci->pcicfgd = *data;
- else
- *data = rc32434_pci->pcicfgd;
-
- rc32434_sync();
-
- return 0;
-}
-
-
-/*
- * We can't address 8 and 16 bit words directly. Instead we have to
- * read/write a 32bit word and mask/modify the data we actually want.
- */
-static int read_config_byte(struct pci_bus *bus, unsigned int devfn,
- int where, u8 * val)
-{
- u32 data;
- int ret;
-
- ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
- *val = (data >> ((where & 3) << 3)) & 0xff;
- return ret;
-}
-
-static int read_config_word(struct pci_bus *bus, unsigned int devfn,
- int where, u16 * val)
-{
- u32 data;
- int ret;
-
- ret = config_access(PCI_ACCESS_READ, bus, devfn, where, &data);
- *val = (data >> ((where & 3) << 3)) & 0xffff;
- return ret;
-}
-
-static int read_config_dword(struct pci_bus *bus, unsigned int devfn,
- int where, u32 * val)
-{
- int ret;
- int delay = 1;
-
- if (bus->number == 0 && PCI_SLOT(devfn) > 21)
- return 0;
-
-retry:
- ret = config_access(PCI_ACCESS_READ, bus, devfn, where, val);
-
- /* PCI scan: check for invalid values, device may not have
- * finished initializing */
-
- if (where == PCI_VENDOR_ID) {
- if (ret == 0xffffffff || ret == 0x00000000 ||
- ret == 0x0000ffff || ret == 0xffff0000) {
-
- if (delay > 4)
- return 0;
-
- delay *= 2;
- msleep(delay);
- goto retry;
- }
- }
-
- return ret;
-}
-
-static int
-write_config_byte(struct pci_bus *bus, unsigned int devfn, int where,
- u8 val)
-{
- u32 data = 0;
-
- if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
- return -1;
-
- data = (data & ~(0xff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
-
- if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
- return -1;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-
-static int
-write_config_word(struct pci_bus *bus, unsigned int devfn, int where,
- u16 val)
-{
- u32 data = 0;
-
- if (config_access(PCI_ACCESS_READ, bus, devfn, where, &data))
- return -1;
-
- data = (data & ~(0xffff << ((where & 3) << 3))) |
- (val << ((where & 3) << 3));
-
- if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &data))
- return -1;
-
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-
-static int
-write_config_dword(struct pci_bus *bus, unsigned int devfn, int where,
- u32 val)
-{
- if (config_access(PCI_ACCESS_WRITE, bus, devfn, where, &val))
- return -1;
-
- return PCIBIOS_SUCCESSFUL;
-}
-
-static int pci_config_read(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 * val)
-{
- switch (size) {
- case 1:
- return read_config_byte(bus, devfn, where, (u8 *) val);
- case 2:
- return read_config_word(bus, devfn, where, (u16 *) val);
- default:
- return read_config_dword(bus, devfn, where, val);
- }
-}
-
-static int pci_config_write(struct pci_bus *bus, unsigned int devfn,
- int where, int size, u32 val)
-{
- switch (size) {
- case 1:
- return write_config_byte(bus, devfn, where, (u8) val);
- case 2:
- return write_config_word(bus, devfn, where, (u16) val);
- default:
- return write_config_dword(bus, devfn, where, val);
- }
-}
-
-struct pci_ops rc32434_pci_ops = {
- .read = pci_config_read,
- .write = pci_config_write,
-};
+++ /dev/null
-/**************************************************************************
- *
- * BRIEF MODULE DESCRIPTION
- * PCI initialization for IDT EB434 board
- *
- * Copyright 2004 IDT Inc. (rischelp@idt.com)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- **************************************************************************
- * May 2004 rkt, neb
- *
- * Initial Release
- *
- *
- *
- **************************************************************************
- */
-
-#include <linux/autoconf.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/kernel.h>
-#include <linux/init.h>
-
-#include <asm/rc32434/rc32434.h>
-#include <asm/rc32434/pci.h>
-
-#define PCI_ACCESS_READ 0
-#define PCI_ACCESS_WRITE 1
-
-/* define an unsigned array for the PCI registers */
-unsigned int korinaCnfgRegs[25] = {
- KORINA_CNFG1, KORINA_CNFG2, KORINA_CNFG3, KORINA_CNFG4,
- KORINA_CNFG5, KORINA_CNFG6, KORINA_CNFG7, KORINA_CNFG8,
- KORINA_CNFG9, KORINA_CNFG10, KORINA_CNFG11, KORINA_CNFG12,
- KORINA_CNFG13, KORINA_CNFG14, KORINA_CNFG15, KORINA_CNFG16,
- KORINA_CNFG17, KORINA_CNFG18, KORINA_CNFG19, KORINA_CNFG20,
- KORINA_CNFG21, KORINA_CNFG22, KORINA_CNFG23, KORINA_CNFG24
-};
-static struct resource rc32434_res_pci_mem1;
-static struct resource rc32434_res_pci_mem2;
-
-static struct resource rc32434_res_pci_mem1 = {
- .name = "PCI MEM1",
- .start = 0x50000000,
- .end = 0x5FFFFFFF,
- .flags = IORESOURCE_MEM,
- .parent = &rc32434_res_pci_mem1,
- .sibling = NULL,
- .child = &rc32434_res_pci_mem2
-};
-
-static struct resource rc32434_res_pci_mem2 = {
- .name = "PCI Mem2",
- .start = 0x60000000,
- .end = 0x6FFFFFFF,
- .flags = IORESOURCE_MEM,
- .parent = &rc32434_res_pci_mem1,
- .sibling = NULL,
- .child = NULL
-};
-
-static struct resource rc32434_res_pci_io1 = {
- .name = "PCI I/O1",
- .start = 0x18800000,
- .end = 0x188FFFFF,
- .flags = IORESOURCE_IO,
-};
-
-extern struct pci_ops rc32434_pci_ops;
-
-#define PCI_MEM1_START PCI_ADDR_START
-#define PCI_MEM1_END PCI_ADDR_START + CPUTOPCI_MEM_WIN - 1
-#define PCI_MEM2_START PCI_ADDR_START + CPUTOPCI_MEM_WIN
-#define PCI_MEM2_END PCI_ADDR_START + ( 2* CPUTOPCI_MEM_WIN) - 1
-#define PCI_IO1_START PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN)
-#define PCI_IO1_END PCI_ADDR_START + (2* CPUTOPCI_MEM_WIN) + CPUTOPCI_IO_WIN -1
-#define PCI_IO2_START PCI_ADDR_START + (2 * CPUTOPCI_MEM_WIN) + CPUTOPCI_IO_WIN
-#define PCI_IO2_END PCI_ADDR_START + (2* CPUTOPCI_MEM_WIN) + (2 * CPUTOPCI_IO_WIN) -1
-
-
-struct pci_controller rc32434_controller2;
-
-struct pci_controller rc32434_controller = {
- .pci_ops = &rc32434_pci_ops,
- .mem_resource = &rc32434_res_pci_mem1,
- .io_resource = &rc32434_res_pci_io1,
- .mem_offset = 0,
- .io_offset = 0,
-
-};
-
-#ifdef __MIPSEB__
-#define PCI_ENDIAN_FLAG PCILBAC_sb_m
-#else
-#define PCI_ENDIAN_FLAG 0
-#endif
-
-static int __init rc32434_pcibridge_init(void)
-{
- unsigned int pcicValue, pcicData = 0;
- unsigned int dummyRead, pciCntlVal;
- int loopCount;
- unsigned int pciConfigAddr;
-
- pcicValue = rc32434_pci->pcic;
- pcicValue = (pcicValue >> PCIM_SHFT) & PCIM_BIT_LEN;
- if (!((pcicValue == PCIM_H_EA) ||
- (pcicValue == PCIM_H_IA_FIX) ||
- (pcicValue == PCIM_H_IA_RR))) {
- printk("PCI init error!!!\n");
- /* Not in Host Mode, return ERROR */
- return -1;
- }
- /* Enables the Idle Grant mode, Arbiter Parking */
- pcicData |=(PCIC_igm_m|PCIC_eap_m|PCIC_en_m);
- rc32434_pci->pcic = pcicData; /* Enable the PCI bus Interface */
- /* Zero out the PCI status & PCI Status Mask */
- for(;;)
- {
- pcicData = rc32434_pci->pcis;
- if (!(pcicData & PCIS_rip_m))
- break;
- }
-
- rc32434_pci->pcis = 0;
- rc32434_pci->pcism = 0xFFFFFFFF;
- /* Zero out the PCI decoupled registers */
- rc32434_pci->pcidac=0; /* disable PCI decoupled accesses at initialization */
- rc32434_pci->pcidas=0; /* clear the status */
- rc32434_pci->pcidasm=0x0000007F; /* Mask all the interrupts */
- /* Mask PCI Messaging Interrupts */
- rc32434_pci_msg->pciiic = 0;
- rc32434_pci_msg->pciiim = 0xFFFFFFFF;
- rc32434_pci_msg->pciioic = 0;
- rc32434_pci_msg->pciioim = 0;
-
-
- /* Setup PCILB0 as Memory Window */
- rc32434_pci->pcilba[0].a = (unsigned int) (PCI_ADDR_START);
-
- /* setup the PCI map address as same as the local address */
-
- rc32434_pci->pcilba[0].m = (unsigned int) (PCI_ADDR_START);
-
-
- /* Setup PCILBA1 as MEM */
- rc32434_pci->pcilba[0].c = ( ((SIZE_256MB & 0x1f) << PCILBAC_size_b) | PCI_ENDIAN_FLAG);
- dummyRead = rc32434_pci->pcilba[0].c; /* flush the CPU write Buffers */
- rc32434_pci->pcilba[1].a = 0x60000000;
- rc32434_pci->pcilba[1].m = 0x60000000;
-
- /* setup PCILBA2 as IO Window*/
- rc32434_pci->pcilba[1].c = (((SIZE_256MB & 0x1f) << PCILBAC_size_b )| PCI_ENDIAN_FLAG);
- dummyRead = rc32434_pci->pcilba[1].c; /* flush the CPU write Buffers */
- rc32434_pci->pcilba[2].a = 0x18C00000;
- rc32434_pci->pcilba[2].m = 0x18FFFFFF;
-
- /* setup PCILBA2 as IO Window*/
- rc32434_pci->pcilba[2].c = (((SIZE_4MB & 0x1f) << PCILBAC_size_b) | PCI_ENDIAN_FLAG );
- dummyRead = rc32434_pci->pcilba[2].c; /* flush the CPU write Buffers */
-
- /* Setup PCILBA3 as IO Window */
- rc32434_pci->pcilba[3].a = 0x18800000;
- rc32434_pci->pcilba[3].m = 0x18800000;
- rc32434_pci->pcilba[3].c = ( (((SIZE_1MB & 0x1ff) << PCILBAC_size_b) | PCILBAC_msi_m) | PCI_ENDIAN_FLAG);
- dummyRead = rc32434_pci->pcilba[3].c; /* flush the CPU write Buffers */
-
- pciConfigAddr=(unsigned int)(0x80000004);
- for(loopCount=0;loopCount<24;loopCount++){
- rc32434_pci->pcicfga=pciConfigAddr;
- dummyRead=rc32434_pci->pcicfga;
- rc32434_pci->pcicfgd = korinaCnfgRegs[loopCount];
- dummyRead=rc32434_pci->pcicfgd;
- pciConfigAddr += 4;
- }
- rc32434_pci->pcitc = (unsigned int)((PCITC_RTIMER_VAL&0xff) << PCITC_rtimer_b)
- | ((PCITC_DTIMER_VAL&0xff) << PCITC_dtimer_b);
-
- pciCntlVal=rc32434_pci->pcic;
- pciCntlVal &=~(PCIC_tnr_m);
- rc32434_pci->pcic = pciCntlVal;
- pciCntlVal=rc32434_pci->pcic;
- return 0;
-}
-
-/* Do platform specific device initialization at pci_enable_device() time */
-int pcibios_plat_dev_init(struct pci_dev *dev)
-{
- if (PCI_SLOT(dev->devfn) == 6 && dev->bus->number == 0) {
- /* disable prefetched memory range */
- pci_write_config_word(dev, PCI_PREF_MEMORY_LIMIT, 0);
- pci_write_config_word(dev, PCI_PREF_MEMORY_BASE, 0x10);
-
- pci_write_config_byte(dev, PCI_CACHE_LINE_SIZE, 4);
- }
- return 0;
-}
-
-static int __init rc32434_pci_init(void)
-{
- printk("PCI: Initializing PCI\n");
-
- ioport_resource.start = rc32434_res_pci_io1.start;
- ioport_resource.end = rc32434_res_pci_io1.end;
-
- rc32434_pcibridge_init();
-
- register_pci_controller(&rc32434_controller);
- rc32434_sync();
-
- return 0;
-}
-
-arch_initcall(rc32434_pci_init);
-
+++ /dev/null
-#
-# Makefile for the RB500 board specific parts of the kernel
-#
-
-obj-y += irq.o time.o setup.o serial.o prom.o gpio.o devices.o
+++ /dev/null
-/*
- * RouterBoard 500 Platform devices
- *
- * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
- * Copyright (C) 2007 Florian Fainelli <florian@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- */
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/ctype.h>
-#include <linux/string.h>
-#include <linux/platform_device.h>
-#include <linux/mtd/nand.h>
-#include <linux/mtd/mtd.h>
-#include <linux/mtd/partitions.h>
-#include <linux/gpio_keys.h>
-#include <linux/input.h>
-
-#include <asm/bootinfo.h>
-
-#include <asm/rc32434/rc32434.h>
-#include <asm/rc32434/dma.h>
-#include <asm/rc32434/dma_v.h>
-#include <asm/rc32434/eth.h>
-#include <asm/rc32434/rb.h>
-
-#define ETH0_DMA_RX_IRQ GROUP1_IRQ_BASE + 0
-#define ETH0_DMA_TX_IRQ GROUP1_IRQ_BASE + 1
-#define ETH0_RX_OVR_IRQ GROUP3_IRQ_BASE + 9
-#define ETH0_TX_UND_IRQ GROUP3_IRQ_BASE + 10
-
-#define ETH0_RX_DMA_ADDR (DMA0_PhysicalAddress + 0*DMA_CHAN_OFFSET)
-#define ETH0_TX_DMA_ADDR (DMA0_PhysicalAddress + 1*DMA_CHAN_OFFSET)
-
-/* NAND definitions */
-#define MEM32(x) *((volatile unsigned *) (x))
-
-#define GPIO_RDY (1 << 0x08)
-#define GPIO_WPX (1 << 0x09)
-#define GPIO_ALE (1 << 0x0a)
-#define GPIO_CLE (1 << 0x0b)
-
-extern char* board_type;
-
-static struct resource korina_dev0_res[] = {
- {
- .name = "korina_regs",
- .start = ETH0_PhysicalAddress,
- .end = ETH0_PhysicalAddress + sizeof(ETH_t),
- .flags = IORESOURCE_MEM,
- }, {
- .name = "korina_rx",
- .start = ETH0_DMA_RX_IRQ,
- .end = ETH0_DMA_RX_IRQ,
- .flags = IORESOURCE_IRQ
- }, {
- .name = "korina_tx",
- .start = ETH0_DMA_TX_IRQ,
- .end = ETH0_DMA_TX_IRQ,
- .flags = IORESOURCE_IRQ
- }, {
- .name = "korina_ovr",
- .start = ETH0_RX_OVR_IRQ,
- .end = ETH0_RX_OVR_IRQ,
- .flags = IORESOURCE_IRQ
- }, {
- .name = "korina_und",
- .start = ETH0_TX_UND_IRQ,
- .end = ETH0_TX_UND_IRQ,
- .flags = IORESOURCE_IRQ
- }, {
- .name = "korina_dma_rx",
- .start = ETH0_RX_DMA_ADDR,
- .end = ETH0_RX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
- .flags = IORESOURCE_MEM,
- }, {
- .name = "korina_dma_tx",
- .start = ETH0_TX_DMA_ADDR,
- .end = ETH0_TX_DMA_ADDR + DMA_CHAN_OFFSET - 1,
- .flags = IORESOURCE_MEM,
- }
-};
-
-static struct korina_device korina_dev0_data = {
- .name = "korina0",
- .mac = {0xde, 0xca, 0xff, 0xc0, 0xff, 0xee}
-};
-
-static struct platform_device korina_dev0 = {
- .id = 0,
- .name = "korina",
- .dev.platform_data = &korina_dev0_data,
- .resource = korina_dev0_res,
- .num_resources = ARRAY_SIZE(korina_dev0_res),
-};
-
-#define CF_GPIO_NUM 13
-
-static struct resource cf_slot0_res[] = {
- {
- .name = "cf_membase",
- .flags = IORESOURCE_MEM
- }, {
- .name = "cf_irq",
- .start = (8 + 4 * 32 + CF_GPIO_NUM), /* 149 */
- .end = (8 + 4 * 32 + CF_GPIO_NUM),
- .flags = IORESOURCE_IRQ
- }
-};
-
-static struct cf_device cf_slot0_data = {
- .gpio_pin = 13
-};
-
-static struct platform_device cf_slot0 = {
- .id = 0,
- .name = "rb500-cf",
- .dev.platform_data = &cf_slot0_data,
- .resource = cf_slot0_res,
- .num_resources = ARRAY_SIZE(cf_slot0_res),
-};
-
-/* Resources and device for NAND. There is no data needed and no irqs, so just define the memory used. */
-
-/*
- * We need to use the OLD Yaffs-1 OOB layout, otherwise the RB bootloader
- * will not be able to find the kernel that we load. So set the oobinfo
- * when creating the partitions
- */
-static struct nand_ecclayout rb500_nand_ecclayout = {
- .eccbytes = 6,
- .eccpos = { 8, 9, 10, 13, 14, 15 },
- .oobavail = 9,
- .oobfree = { { 0, 4 }, { 6, 2 }, { 11, 2 }, { 4, 1 } }
-};
-
-int rb500_dev_ready(struct mtd_info *mtd)
-{
- return MEM32(IDT434_REG_BASE + GPIOD) & GPIO_RDY;
-}
-
-void rb500_cmd_ctrl(struct mtd_info *mtd, int cmd, unsigned int ctrl)
-{
- struct nand_chip *chip = mtd->priv;
- unsigned char orbits, nandbits;
-
- if (ctrl & NAND_CTRL_CHANGE) {
-
- orbits = (ctrl & NAND_CLE) << 1;
- orbits |= (ctrl & NAND_ALE) >> 1;
-
- nandbits = (~ctrl & NAND_CLE) << 1;
- nandbits |= (~ctrl & NAND_ALE) >> 1;
-
- changeLatchU5(orbits, nandbits);
- }
- if (cmd != NAND_CMD_NONE)
- writeb(cmd, chip->IO_ADDR_W);
-}
-
-static struct resource nand_slot0_res[] = {
- [0] = {
- .name = "nand_membase",
- .flags = IORESOURCE_MEM
- }
-};
-
-struct platform_nand_data rb500_nand_data = {
- .ctrl.dev_ready = rb500_dev_ready,
- .ctrl.cmd_ctrl = rb500_cmd_ctrl,
-};
-
-static struct platform_device nand_slot0 = {
- .name = "gen_nand",
- .id = -1,
- .resource = nand_slot0_res,
- .num_resources = ARRAY_SIZE(nand_slot0_res),
- .dev.platform_data = &rb500_nand_data,
-};
-
-static struct mtd_partition rb500_partition_info[] = {
- {
- .name = "Routerboard NAND boot",
- .offset = 0,
- .size = 4 * 1024 * 1024,
- }, {
- .name = "rootfs",
- .offset = MTDPART_OFS_NXTBLK,
- .size = MTDPART_SIZ_FULL,
- }
-};
-
-static struct platform_device rb500_led = {
- .name = "rb500-led",
- .id = 0,
-};
-
-static struct gpio_keys_button rb500_gpio_btn[] = {
- {
- .gpio = 1,
- .code = BTN_0,
- .desc = "S1",
- .active_low = 1,
- }
-};
-
-static struct gpio_keys_platform_data rb500_gpio_btn_data = {
- .buttons = rb500_gpio_btn,
- .nbuttons = ARRAY_SIZE(rb500_gpio_btn),
-};
-
-static struct platform_device rb500_button = {
- .name = "gpio-keys",
- .id = -1,
- .dev = {
- .platform_data = &rb500_gpio_btn_data,
- }
-};
-
-static struct platform_device *rb500_devs[] = {
- &korina_dev0,
- &nand_slot0,
- &cf_slot0,
- &rb500_led,
- &rb500_button
-};
-
-static void __init parse_mac_addr(char *macstr)
-{
- int i, j;
- unsigned char result, value;
-
- for (i = 0; i < 6; i++) {
- result = 0;
-
- if (i != 5 && *(macstr + 2) != ':')
- return;
-
- for (j = 0; j < 2; j++) {
- if (isxdigit(*macstr)
- && (value =
- isdigit(*macstr) ? *macstr -
- '0' : toupper(*macstr) - 'A' + 10) < 16) {
- result = result * 16 + value;
- macstr++;
- } else
- return;
- }
-
- macstr++;
- korina_dev0_data.mac[i] = result;
- }
-}
-
-
-/* DEVICE CONTROLLER 1 */
-#define CFG_DC_DEV1 (void*)0xb8010010
-#define CFG_DC_DEV2 (void*)0xb8010020
-#define CFG_DC_DEVBASE 0x0
-#define CFG_DC_DEVMASK 0x4
-#define CFG_DC_DEVC 0x8
-#define CFG_DC_DEVTC 0xC
-
-/* NAND definitions */
-#define NAND_CHIP_DELAY 25
-
-static int rb500_nand_fixup(struct mtd_info *mtd)
-{
- struct nand_chip *chip = mtd->priv;
-
- if (mtd->writesize == 512)
- chip->ecc.layout = &rb500_nand_ecclayout;
-
- return 0;
-}
-
-static void __init rb500_nand_setup(void)
-{
- switch (mips_machtype) {
- case MACH_MIKROTIK_RB532A:
- changeLatchU5(LO_FOFF | LO_CEX, LO_ULED | LO_ALE | LO_CLE | LO_WPX);
- break;
- default:
- changeLatchU5(LO_WPX | LO_FOFF | LO_CEX, LO_ULED | LO_ALE | LO_CLE);
- break;
- }
-
- /* Setup NAND specific settings */
- rb500_nand_data.chip.nr_chips = 1;
- rb500_nand_data.chip.nr_partitions = ARRAY_SIZE(rb500_partition_info);
- rb500_nand_data.chip.partitions = rb500_partition_info;
- rb500_nand_data.chip.chip_delay = NAND_CHIP_DELAY;
- rb500_nand_data.chip.options = NAND_NO_AUTOINCR;
-
- rb500_nand_data.chip.chip_fixup = &rb500_nand_fixup;
-}
-
-
-static int __init plat_setup_devices(void)
-{
- /* Look for the CF card reader */
- if (!readl(CFG_DC_DEV1 + CFG_DC_DEVMASK))
- rb500_devs[1] = NULL;
- else {
- cf_slot0_res[0].start =
- readl(CFG_DC_DEV1 + CFG_DC_DEVBASE);
- cf_slot0_res[0].end = cf_slot0_res[0].start + 0x1000;
- }
-
- /* Read the NAND resources from the device controller */
- nand_slot0_res[0].start = readl(CFG_DC_DEV2 + CFG_DC_DEVBASE);
- nand_slot0_res[0].end = nand_slot0_res[0].start + 0x1000;
-
- /* Initialise the NAND device */
- rb500_nand_setup();
-
- return platform_add_devices(rb500_devs, ARRAY_SIZE(rb500_devs));
-}
-
-static int __init setup_kmac(char *s)
-{
- printk("korina mac = %s\n", s);
- parse_mac_addr(s);
- return 0;
-}
-
-__setup("kmac=", setup_kmac);
-
-arch_initcall(plat_setup_devices);
+++ /dev/null
-/*
- * Miscellaneous functions for IDT EB434 board
- *
- * Copyright 2004 IDT Inc. (rischelp@idt.com)
- * Copyright 2006 Phil Sutter <n0-1@freewrt.org>
- * Copyright 2007 Florian Fainelli <florian@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/types.h>
-#include <linux/pci.h>
-#include <linux/spinlock.h>
-#include <linux/io.h>
-#include <linux/platform_device.h>
-
-#include <asm/addrspace.h>
-#include <asm/gpio.h>
-
-#include <asm/rc32434/rb.h>
-
-#define GPIO_BADDR 0x18050000
-
-static volatile unsigned char *devCtl3Base;
-static unsigned char latchU5State;
-static spinlock_t clu5Lock = SPIN_LOCK_UNLOCKED;
-
-struct rb500_gpio_reg __iomem *rb500_gpio_reg0;
-EXPORT_SYMBOL(rb500_gpio_reg0);
-
-static struct resource rb500_gpio_reg0_res[] = {
- {
- .name = "gpio_reg0",
- .start = GPIO_BADDR,
- .end = GPIO_BADDR + sizeof(struct rb500_gpio_reg),
- .flags = IORESOURCE_MEM,
- }
-};
-
-void set434Reg(unsigned regOffs, unsigned bit, unsigned len, unsigned val)
-{
- unsigned flags, data;
- unsigned i = 0;
-
- spin_lock_irqsave(&clu5Lock, flags);
- data = *(volatile unsigned *) (IDT434_REG_BASE + regOffs);
- for (i = 0; i != len; ++i) {
- if (val & (1 << i))
- data |= (1 << (i + bit));
- else
- data &= ~(1 << (i + bit));
- }
- *(volatile unsigned *) (IDT434_REG_BASE + regOffs) = data;
- spin_unlock_irqrestore(&clu5Lock, flags);
-}
-EXPORT_SYMBOL(set434Reg);
-
-void changeLatchU5(unsigned char orMask, unsigned char nandMask)
-{
- unsigned flags;
-
- spin_lock_irqsave(&clu5Lock, flags);
- latchU5State = (latchU5State | orMask) & ~nandMask;
- if (!devCtl3Base)
- devCtl3Base = (volatile unsigned char *)
- KSEG1ADDR(*(volatile unsigned *)
- KSEG1ADDR(0x18010030));
- *devCtl3Base = latchU5State;
- spin_unlock_irqrestore(&clu5Lock, flags);
-}
-EXPORT_SYMBOL(changeLatchU5);
-
-unsigned char getLatchU5State(void)
-{
- return latchU5State;
-}
-EXPORT_SYMBOL(getLatchU5State);
-
-int rb500_gpio_get_value(unsigned gpio)
-{
- return readl(&rb500_gpio_reg0->gpiod) & (1 << gpio);
-}
-EXPORT_SYMBOL(rb500_gpio_get_value);
-
-void rb500_gpio_set_value(unsigned gpio, int value)
-{
- unsigned tmp;
-
- tmp = readl(&rb500_gpio_reg0->gpiod) & ~(1 << gpio);
- if (value)
- tmp |= 1 << gpio;
-
- writel(tmp, (void *)&rb500_gpio_reg0->gpiod);
-}
-EXPORT_SYMBOL(rb500_gpio_set_value);
-
-int rb500_gpio_direction_input(unsigned gpio)
-{
- writel(readl(&rb500_gpio_reg0->gpiocfg) & ~(1 << gpio), (void *)&rb500_gpio_reg0->gpiocfg);
-
- return 0;
-}
-EXPORT_SYMBOL(rb500_gpio_direction_input);
-
-int rb500_gpio_direction_output(unsigned gpio, int value)
-{
- gpio_set_value(gpio, value);
- writel(readl(&rb500_gpio_reg0->gpiocfg) | (1 << gpio), (void *)&rb500_gpio_reg0->gpiocfg);
-
- return 0;
-}
-EXPORT_SYMBOL(rb500_gpio_direction_output);
-
-void rb500_gpio_set_int_level(unsigned gpio, int value)
-{
- unsigned tmp;
-
- tmp = readl(&rb500_gpio_reg0->gpioilevel) & ~(1 << gpio);
- if (value)
- tmp |= 1 << gpio;
- writel(tmp, (void *)&rb500_gpio_reg0->gpioilevel);
-}
-EXPORT_SYMBOL(rb500_gpio_set_int_level);
-
-int rb500_gpio_get_int_level(unsigned gpio)
-{
- return readl(&rb500_gpio_reg0->gpioilevel) & (1 << gpio);
-}
-EXPORT_SYMBOL(rb500_gpio_get_int_level);
-
-void rb500_gpio_set_int_status(unsigned gpio, int value)
-{
- unsigned tmp;
-
- tmp = readl(&rb500_gpio_reg0->gpioistat);
- if (value)
- tmp |= 1 << gpio;
- writel(tmp, (void *)&rb500_gpio_reg0->gpioistat);
-}
-EXPORT_SYMBOL(rb500_gpio_set_int_status);
-
-int rb500_gpio_get_int_status(unsigned gpio)
-{
- return readl(&rb500_gpio_reg0->gpioistat) & (1 << gpio);
-}
-EXPORT_SYMBOL(rb500_gpio_get_int_status);
-
-void rb500_gpio_set_func(unsigned gpio, int value)
-{
- unsigned tmp;
-
- tmp = readl(&rb500_gpio_reg0->gpiofunc);
- if (value)
- tmp |= 1 << gpio;
- writel(tmp, (void *)&rb500_gpio_reg0->gpiofunc);
-}
-EXPORT_SYMBOL(rb500_gpio_set_func);
-
-int rb500_gpio_get_func(unsigned gpio)
-{
- return readl(&rb500_gpio_reg0->gpiofunc) & (1 << gpio);
-}
-EXPORT_SYMBOL(rb500_gpio_get_func);
-
-int __init rb500_gpio_init(void)
-{
- rb500_gpio_reg0 = ioremap_nocache(rb500_gpio_reg0_res[0].start,
- rb500_gpio_reg0_res[0].end -
- rb500_gpio_reg0_res[0].start);
-
- if (!rb500_gpio_reg0) {
- printk(KERN_ERR "rb500: cannot remap GPIO register 0\n");
- return -ENXIO;
- }
-
- return 0;
-}
-arch_initcall(rb500_gpio_init);
+++ /dev/null
-/*
- * BRIEF MODULE DESCRIPTION
- * RC32434 interrupt routines.
- *
- * Copyright 2002 MontaVista Software Inc.
- * Author: MontaVista Software, Inc.
- * stevel@mvista.com or source@mvista.com
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- */
-
-#include <linux/errno.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/module.h>
-#include <linux/signal.h>
-#include <linux/sched.h>
-#include <linux/types.h>
-#include <linux/interrupt.h>
-#include <linux/ioport.h>
-#include <linux/timex.h>
-#include <linux/slab.h>
-#include <linux/random.h>
-#include <linux/delay.h>
-
-#include <asm/bitops.h>
-#include <asm/bootinfo.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/time.h>
-#include <asm/mipsregs.h>
-#include <asm/system.h>
-#include <asm/rc32434/rc32434.h>
-#include <asm/rc32434/gpio.h>
-
-extern void set_debug_traps(void);
-extern irq_cpustat_t irq_stat [NR_CPUS];
-unsigned int local_bh_count[NR_CPUS];
-unsigned int local_irq_count[NR_CPUS];
-
-static unsigned int startup_irq(unsigned int irq);
-static void rb500_end_irq(unsigned int irq_nr);
-static void mask_and_ack_irq(unsigned int irq_nr);
-static void rb500_enable_irq(unsigned int irq_nr);
-static void rb500_disable_irq(unsigned int irq_nr);
-
-extern void __init init_generic_irq(void);
-extern struct rb500_gpio_reg __iomem *rb500_gpio_reg0;
-
-typedef struct {
- u32 mask; /* mask of valid bits in pending/mask registers */
- volatile u32 *base_addr;
-} intr_group_t;
-
-#define RC32434_NR_IRQS (GROUP4_IRQ_BASE + 32)
-
-#if (NR_IRQS < RC32434_NR_IRQS)
-#error Too little irqs defined. Did you override <asm/irq.h> ?
-#endif
-
-static const intr_group_t intr_group[NUM_INTR_GROUPS] = {
- { 0x0000efff, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 0 * IC_GROUP_OFFSET) },
- { 0x00001fff, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 1 * IC_GROUP_OFFSET) },
- { 0x00000007, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 2 * IC_GROUP_OFFSET) },
- { 0x0003ffff, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 3 * IC_GROUP_OFFSET) },
- { 0xffffffff, (u32 *)KSEG1ADDR(IC_GROUP0_PEND + 4 * IC_GROUP_OFFSET) }
-};
-
-#define READ_PEND(base) (*(base))
-#define READ_MASK(base) (*(base + 2))
-#define WRITE_MASK(base, val) (*(base + 2) = (val))
-
-static inline int irq_to_group(unsigned int irq_nr)
-{
- return ((irq_nr - GROUP0_IRQ_BASE) >> 5);
-}
-
-static inline int group_to_ip(unsigned int group)
-{
- return group + 2;
-}
-
-static inline void enable_local_irq(unsigned int ip)
-{
- int ipnum = 0x100 << ip;
- clear_c0_cause(ipnum);
- set_c0_status(ipnum);
-}
-
-static inline void disable_local_irq(unsigned int ip)
-{
- int ipnum = 0x100 << ip;
- clear_c0_status(ipnum);
-}
-
-static inline void ack_local_irq(unsigned int ip)
-{
- int ipnum = 0x100 << ip;
- clear_c0_cause(ipnum);
-}
-
-static void rb500_enable_irq(unsigned int irq_nr)
-{
- int ip = irq_nr - GROUP0_IRQ_BASE;
- unsigned int group, intr_bit;
- volatile unsigned int *addr;
-
-
- if (ip < 0)
- enable_local_irq(irq_nr);
- else {
- group = ip >> 5;
-
- ip &= (1<<5)-1;
- intr_bit = 1 << ip;
-
- enable_local_irq(group_to_ip(group));
-
- addr = intr_group[group].base_addr;
- WRITE_MASK(addr, READ_MASK(addr) & ~intr_bit);
- }
-}
-
-static void rb500_disable_irq(unsigned int irq_nr)
-{
- int ip = irq_nr - GROUP0_IRQ_BASE;
- unsigned int group, intr_bit, mask;
- volatile unsigned int *addr;
-
- if (ip < 0) {
- disable_local_irq(irq_nr);
- }else{
- group = ip >> 5;
-
- ip &= (1<<5) -1;
- intr_bit = 1 << ip;
- addr = intr_group[group].base_addr;
- mask = READ_MASK(addr);
- mask |= intr_bit;
- WRITE_MASK(addr,mask);
-
- /*
- * if there are no more interrupts enabled in this
- * group, disable corresponding IP
- */
- if (mask == intr_group[group].mask)
- disable_local_irq(group_to_ip(group));
- }
-}
-
-static unsigned int startup_irq(unsigned int irq_nr)
-{
- rb500_enable_irq(irq_nr);
- return 0;
-}
-
-static void shutdown_irq(unsigned int irq_nr)
-{
- rb500_disable_irq(irq_nr);
- return;
-}
-
-static void mask_and_ack_irq(unsigned int irq_nr)
-{
- rb500_disable_irq(irq_nr);
- ack_local_irq(group_to_ip(irq_to_group(irq_nr)));
-}
-
-static void rb500_end_irq(unsigned int irq_nr)
-{
-
- int ip = irq_nr - GROUP0_IRQ_BASE;
- unsigned int intr_bit, group;
- volatile unsigned int *addr;
-
- if ((irq_desc[irq_nr].status & (IRQ_DISABLED | IRQ_INPROGRESS))) {
- printk("warning: end_irq %d did not enable (%x)\n",
- irq_nr, irq_desc[irq_nr].status);
- return;
- }
-
- if (ip < 0) {
- enable_local_irq(irq_nr);
- } else {
- group = ip >> 5;
-
- ip &= (1 << 5) - 1;
- intr_bit = 1 << ip;
-
- if (irq_nr >= GROUP4_IRQ_BASE && irq_nr <= (GROUP4_IRQ_BASE + 13)) {
- rb500_gpio_reg0->gpioistat = rb500_gpio_reg0->gpioistat & ~intr_bit;
- }
-
- enable_local_irq(group_to_ip(group));
-
- addr = intr_group[group].base_addr;
- WRITE_MASK(addr, READ_MASK(addr) & ~intr_bit);
- }
-}
-
-static struct hw_interrupt_type rc32434_irq_type = {
- .typename = "RB500",
- .startup = startup_irq,
- .shutdown = shutdown_irq,
- .enable = rb500_enable_irq,
- .disable = rb500_disable_irq,
- .ack = mask_and_ack_irq,
- .end = rb500_end_irq,
-};
-
-
-void __init arch_init_irq(void)
-{
- int i;
-
- printk("Initializing IRQ's: %d out of %d\n", RC32434_NR_IRQS, NR_IRQS);
- memset(irq_desc, 0, sizeof(irq_desc));
-
- for (i = 0; i < RC32434_NR_IRQS; i++) {
- irq_desc[i].status = IRQ_DISABLED;
- irq_desc[i].action = NULL;
- irq_desc[i].depth = 1;
- irq_desc[i].chip = &rc32434_irq_type;
- spin_lock_init(&irq_desc[i].lock);
- }
-}
-
-/* Main Interrupt dispatcher */
-asmlinkage void plat_irq_dispatch(void)
-{
- unsigned int ip, pend, group;
- volatile unsigned int *addr;
- unsigned int cp0_cause = read_c0_cause() & read_c0_status();
-
- if (cp0_cause & CAUSEF_IP7) {
- do_IRQ(7);
- } else if ((ip = (cp0_cause & 0x7c00))) {
- group = 21 - rc32434_clz(ip);
-
- addr = intr_group[group].base_addr;
-
- pend = READ_PEND(addr);
- pend &= ~READ_MASK(addr); // only unmasked interrupts
- pend = 39 - rc32434_clz(pend);
- do_IRQ((group << 5) + pend);
- }
-}
+++ /dev/null
-/*
-* prom.c
-**********************************************************************
-* P . Sadik Oct 10, 2003
-*
-* Started change log
-* idt_cpu_freq is make a kernel configuration parameter
-* idt_cpu_freq is exported so that other modules can use it.
-* Code cleanup
-**********************************************************************
-* P. Sadik Oct 20, 2003
-*
-* Removed NVRAM code from here, since they are already available under
-* nvram directory.
-* Added serial port initialisation.
-**********************************************************************
-**********************************************************************
-* P. Sadik Oct 30, 2003
-*
-* Added reset_cons_port
-**********************************************************************
-
- P.Christeas, 2005-2006
- Port to 2.6, add 2.6 cmdline parsing
-
-*/
-
-#include <linux/autoconf.h>
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/module.h>
-#include <linux/string.h>
-#include <linux/console.h>
-#include <asm/bootinfo.h>
-#include <linux/bootmem.h>
-#include <linux/ioport.h>
-#include <linux/blkdev.h>
-#include <asm/rc32434/ddr.h>
-
-#define PROM_ENTRY(x) (0xbfc00000+((x)*8))
-extern void __init setup_serial_port(void);
-
-unsigned int idt_cpu_freq = 132000000;
-EXPORT_SYMBOL(idt_cpu_freq);
-unsigned int gpio_bootup_state = 0;
-EXPORT_SYMBOL(gpio_bootup_state);
-
-char mips_mac_address[18] = "08:00:06:05:40:01";
-EXPORT_SYMBOL(mips_mac_address);
-
-/* what to append to cmdline when button is [not] pressed */
-#define GPIO_INIT_NOBUTTON ""
-#define GPIO_INIT_BUTTON " 2"
-
-#ifdef CONFIG_MIKROTIK_RB500
-unsigned soft_reboot = 0;
-EXPORT_SYMBOL(soft_reboot);
-#endif
-
-#define SR_NMI 0x00180000 /* NMI */
-#define SERIAL_SPEED_ENTRY 0x00000001
-
-#ifdef CONFIG_REMOTE_DEBUG
-extern int remote_debug;
-#endif
-
-#define FREQ_TAG "HZ="
-#define GPIO_TAG "gpio="
-#define KMAC_TAG "kmac="
-#define MEM_TAG "mem="
-#define BOARD_TAG "board="
-#define IGNORE_CMDLINE_MEM 1
-#define DEBUG_DDR
-
-#define BOARD_RB532 "500"
-#define BOARD_RB532A "500r5"
-
-void parse_soft_settings(unsigned *ptr, unsigned size);
-void parse_hard_settings(unsigned *ptr, unsigned size);
-
-void __init prom_setup_cmdline(void);
-
-void __init prom_init(void)
-{
- DDR_t ddr = (DDR_t) DDR_VirtualAddress; /* define the pointer to the DDR registers */
- phys_t memsize = 0-ddr->ddrmask;
-
- /* this should be the very first message, even before serial is properly initialized */
- prom_setup_cmdline();
- setup_serial_port();
-
- soft_reboot = read_c0_status() & SR_NMI;
- pm_power_off = NULL;
-
- /*
- * give all RAM to boot allocator,
- * except for the first 0x400 and the last 0x200 bytes
- */
- add_memory_region(ddr->ddrbase + 0x400, memsize - 0x600, BOOT_MEM_RAM);
-}
-
-void __init prom_free_prom_memory(void)
-{
- /* No prom memory to free */
-}
-
-static inline int match_tag(char *arg, const char *tag)
-{
- return (strncmp(arg, tag, strlen(tag)) == 0);
-}
-
-static inline unsigned long tag2ul(char *arg, const char *tag)
-{
- char *num = arg+strlen(tag);
- return simple_strtoul(num, 0, 10);
-}
-
-extern char _image_cmdline;
-void __init prom_setup_cmdline(void){
- char cmd_line[CL_SIZE];
- char *cp;
- int prom_argc;
- char **prom_argv, **prom_envp;
- int i;
-
- prom_argc = fw_arg0;
- prom_argv = (char **) fw_arg1;
- prom_envp = (char **) fw_arg2;
-
- cp=cmd_line;
- /* Note: it is common that parameters start at argv[1] and not argv[0],
- however, our elf loader starts at [0] */
- for(i=0;i<prom_argc;i++){
- if (match_tag(prom_argv[i], FREQ_TAG)) {
- idt_cpu_freq = tag2ul(prom_argv[i], FREQ_TAG);
- continue;
- }
-#ifdef IGNORE_CMDLINE_MEM
- /* parses out the "mem=xx" arg */
- if (match_tag(prom_argv[i], MEM_TAG)) {
- continue;
- }
-#endif
- if (i>0) *(cp++) = ' ';
- if (match_tag(prom_argv[i], BOARD_TAG)) {
- char *board = prom_argv[i] + strlen(BOARD_TAG);
- if (match_tag(board, BOARD_RB532A))
- mips_machtype = MACH_MIKROTIK_RB532A;
- else
- mips_machtype = MACH_MIKROTIK_RB532;
- }
-
- if (match_tag(prom_argv[i], GPIO_TAG)) {
- gpio_bootup_state = tag2ul(prom_argv[i], GPIO_TAG);
- }
- strcpy(cp,prom_argv[i]);
- cp+=strlen(prom_argv[i]);
- }
- *(cp++) = ' ';
- strcpy(cp,(&_image_cmdline + 8));
- cp += strlen(&_image_cmdline);
-
- i=strlen(arcs_cmdline);
- if (i>0){
- *(cp++) = ' ';
- strcpy(cp,arcs_cmdline);
- cp+=strlen(arcs_cmdline);
- }
- if (gpio_bootup_state&0x02)
- strcpy(cp,GPIO_INIT_NOBUTTON);
- else
- strcpy(cp,GPIO_INIT_BUTTON);
- cmd_line[CL_SIZE-1] = '\0';
-
- strcpy(arcs_cmdline,cmd_line);
-}
-
+++ /dev/null
-/**************************************************************************
- *
- * BRIEF MODULE DESCRIPTION
- * Serial port initialisation.
- *
- * Copyright 2004 IDT Inc. (rischelp@idt.com)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- **************************************************************************
- * May 2004 rkt, neb
- *
- * Initial Release
- *
- *
- *
- **************************************************************************
- */
-
-
-#include <linux/autoconf.h>
-#include <linux/init.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/interrupt.h>
-#include <linux/tty.h>
-#include <linux/serial.h>
-#include <linux/serial_core.h>
-#include <linux/serial_8250.h>
-
-#include <asm/time.h>
-#include <asm/cpu.h>
-#include <asm/bootinfo.h>
-#include <asm/irq.h>
-#include <asm/serial.h>
-#include <asm/rc32434/rc32434.h>
-
-extern unsigned int idt_cpu_freq;
-
-static struct uart_port serial_req = {
- .type = PORT_16550A,
- .line = 0,
- .irq = RC32434_UART0_IRQ,
- //.flags = STD_COM_FLAGS,
- .iotype = UPIO_MEM,
- .membase = (char *) KSEG1ADDR(RC32434_UART0_BASE),
-// .fifosize = 14
- .regshift = 2
-};
-
-int __init setup_serial_port(void)
-{
- serial_req.uartclk = idt_cpu_freq;
-
- if (early_serial_setup(&serial_req))
- return -ENODEV;
-
- return(0);
-}
+++ /dev/null
-/*
- * setup.c - boot time setup code
- */
-
-#include <linux/init.h>
-#include <linux/mm.h>
-#include <linux/sched.h>
-#include <linux/irq.h>
-#include <linux/ioport.h>
-#include <linux/pm.h>
-#include <asm/bootinfo.h>
-#include <asm/mipsregs.h>
-#include <asm/pgtable.h>
-#include <asm/reboot.h>
-#include <asm/addrspace.h> /* for KSEG1ADDR() */
-#include <asm/time.h>
-#include <asm/io.h>
-#include <asm/rc32434/rc32434.h>
-#include <asm/rc32434/pci.h>
-
-#ifdef CONFIG_PCI
-extern void rc32434_time_init(void);
-extern int __init rc32434_pcibridge_init(void);
-#endif
-
-#define epldMask ((volatile unsigned char *)0xB900000d)
-
-static void rb_machine_restart(char *command)
-{
- /* just jump to the reset vector */
- * (volatile unsigned *) KSEG1ADDR(0x18008000) = 0x80000001;
- ((void (*)(void))KSEG1ADDR(0x1FC00000u))();
-}
-
-static void rb_machine_halt(void)
-{
- for(;;) continue;
-}
-
-#ifdef CONFIG_CPU_HAS_WB
-void (*__wbflush) (void);
-
-static void rb_write_buffer_flush(void)
-{
- __asm__ __volatile__
- ("sync\n\t" "nop\n\t" "loop: bc0f loop\n\t" "nop\n\t");
-}
-#endif
-
-void __init plat_mem_setup(void)
-{
- unsigned int pciCntlVal;
-
- //board_time_init = rc32434_time_init;
-
-#ifdef CONFIG_CPU_HAS_WB
- __wbflush = rb_write_buffer_flush;
-#endif
- _machine_restart = rb_machine_restart;
- _machine_halt = rb_machine_halt;
- /*_machine_power_off = rb_machine_power_halt;*/
- pm_power_off = rb_machine_halt;
-
- set_io_port_base(KSEG1);
-
- pciCntlVal=rc32434_pci->pcic;
- pciCntlVal &= 0xFFFFFF7;
- rc32434_pci->pcic = pciCntlVal;
-
-#ifdef CONFIG_PCI
- /* Enable PCI interrupts in EPLD Mask register */
- *epldMask = 0x0;
- *(epldMask + 1) = 0x0;
-#endif
- write_c0_wired(0);
-}
-
-const char *get_system_type(void)
-{
- return "MIPS RB500";
-}
+++ /dev/null
-/*
-****************************************************************************
-* Carsten Langgaard, carstenl@mips.com
-* Copyright (C) 1999,2000 MIPS Technologies, Inc. All rights reserved.
-*
-***************************************************************************
-*
-* This program is free software; you can distribute it and/or modify it
-* under the terms of the GNU General Public License (Version 2) as
-* published by the Free Software Foundation.
-*
-* This program is distributed in the hope it will be useful, but WITHOUT
-* ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
-* FITNESS FOR A PARTICULAR PURPOSE. See the GNU General Public License
-* for more details.
-*
-* You should have received a copy of the GNU General Public License along
-* with this program; if not, write to the Free Software Foundation, Inc.,
-* 59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
-*
-****************************************************************************
-*
-* Setting up the clock on the MIPS boards.
-*
-****************************************************************************
-* P. Sadik Oct 10, 2003
-*
-* Started change log.
-* mips_counter_frequency is now calculated at run time, based on idt_cpu_freq.
-* Code cleanup
-****************************************************************************
-*/
-
-#include <linux/autoconf.h>
-#include <linux/init.h>
-#include <linux/kernel_stat.h>
-#include <linux/sched.h>
-#include <linux/spinlock.h>
-#include <linux/mc146818rtc.h>
-#include <linux/irq.h>
-#include <linux/timex.h>
-
-#include <asm/irq_cpu.h>
-#include <asm/mipsregs.h>
-#include <asm/ptrace.h>
-#include <asm/debug.h>
-#include <asm/rc32434/rc32434.h>
-
-static unsigned long r4k_offset; /* Amount to incr compare reg each time */
-extern unsigned int mips_hpt_frequency;
-extern unsigned int idt_cpu_freq;
-
-/*
- * Figure out the r4k offset, the amount to increment the compare
- * register for each time tick. There is no RTC available.
- *
- * The RC32434 counts at half the CPU *core* speed.
- */
-static unsigned long __init cal_r4koff(void)
-{
- mips_hpt_frequency = idt_cpu_freq * IDT_CLOCK_MULT / 2;
- return (mips_hpt_frequency / HZ);
-}
-
-
-void __init plat_time_init(void)
-{
- unsigned int est_freq, flags;
-
- local_irq_save(flags);
-
- printk("calculating r4koff... ");
- r4k_offset = cal_r4koff();
- printk("%08lx(%d)\n", r4k_offset, (int) r4k_offset);
-
- est_freq = 2*r4k_offset*HZ;
- est_freq += 5000; /* round */
- est_freq -= est_freq%10000;
- printk("CPU frequency %d.%02d MHz\n", est_freq/1000000,
- (est_freq%1000000)*100/1000000);
- local_irq_restore(flags);
-}
+++ /dev/null
-## Makefile for the RB532 CF port
-
-obj-y += bdev.o ata.o
+++ /dev/null
-/* CF-mips driver
- This is a block driver for the direct (mmaped) interface to the CF-slot,
- found in Routerboard.com's RB532 board
- See SDK provided from routerboard.com.
-
- Module adapted By P.Christeas <p_christeas@yahoo.com>, 2005-6.
- Cleaned up and adapted to platform_device by Felix Fietkau <nbd@openwrt.org>
-
- This work is redistributed under the terms of the GNU General Public License.
-*/
-
-#include <linux/kernel.h> /* printk() */
-#include <linux/module.h> /* module to be loadable */
-#include <linux/delay.h>
-#include <linux/sched.h>
-#include <linux/pci.h>
-#include <linux/ioport.h> /* request_mem_region() */
-
-#include <asm/gpio.h>
-#include <asm/unaligned.h> /* ioremap() */
-#include <asm/io.h> /* ioremap() */
-#include <asm/rc32434/rb.h>
-
-#include "ata.h"
-
-#define REQUEST_MEM_REGION 0
-#define DEBUG 1
-
-#if DEBUG
-#define DEBUGP printk
-#else
-#define DEBUGP(format, args...)
-#endif
-
-#define SECS 1000000 /* unit for wait_not_busy() is 1us */
-
-unsigned cf_head = 0;
-unsigned cf_cyl = 0;
-unsigned cf_spt = 0;
-unsigned cf_sectors = 0;
-static unsigned cf_block_size = 1;
-static void *baddr = 0;
-
-#define DBUF32 ((volatile u32 *)((unsigned long)dev->baddr | ATA_DBUF_OFFSET))
-
-
-static void cf_do_tasklet(unsigned long dev_l);
-
-
-static inline void wareg(u8 val, unsigned reg, struct cf_mips_dev* dev)
-{
- writeb(val, dev->baddr + ATA_REG_OFFSET + reg);
-}
-
-static inline u8 rareg(unsigned reg, struct cf_mips_dev* dev)
-{
- return readb(dev->baddr + ATA_REG_OFFSET + reg);
-}
-
-static inline int cfrdy(struct cf_mips_dev *dev)
-{
- return gpio_get_value(dev->pin);
-}
-
-static inline void prepare_cf_irq(struct cf_mips_dev *dev)
-{
- rb500_gpio_set_int_level(1, dev->pin); /* interrupt on cf ready (not busy) */
- rb500_gpio_set_int_status(0, dev->pin); /* clear interrupt status */
-}
-
-static inline int cf_present(struct cf_mips_dev* dev)
-{
- /* TODO: read and configure CIS into memory mapped mode
- * TODO: parse CISTPL_CONFIG on CF+ cards to get base address (0x200)
- * TODO: maybe adjust power saving setting for Hitachi Microdrive
- */
- int i;
-
- /* setup CFRDY GPIO as input */
- rb500_gpio_set_func(dev->pin, 0);
- gpio_direction_input(dev->pin);
-
- for (i = 0; i < 0x10; ++i) {
- if (rareg(i,dev) != 0xff)
- return 1;
- }
- return 0;
-}
-
-static inline int is_busy(struct cf_mips_dev *dev)
-{
- return !cfrdy(dev);
-}
-
-static int wait_not_busy(int to_us, int wait_for_busy,struct cf_mips_dev *dev)
-{
- int us_passed = 0;
- if (wait_for_busy && !is_busy(dev)) {
- /* busy must appear within 400ns,
- * but it may dissapear before we see it
- * => must not wait for busy in a loop
- */
- ndelay(400);
- }
-
- do {
- if (us_passed)
- udelay(1); /* never reached in async mode */
- if (!is_busy(dev)) {
- if (us_passed > 1 * SECS) {
- printk(KERN_WARNING "cf-mips: not busy ok (after %dus)"
- ", status 0x%02x\n", us_passed, (unsigned) rareg(ATA_REG_ST,dev));
- }
- return CF_TRANS_OK;
- }
- if (us_passed == 1 * SECS) {
- printk(KERN_WARNING "cf-mips: wait not busy %dus..\n", to_us);
- }
- if (dev->async_mode) {
- dev->to_timer.expires = jiffies + (to_us * HZ / SECS);
- dev->irq_enable_time = jiffies;
- prepare_cf_irq(dev);
- if (is_busy(dev)) {
- add_timer(&dev->to_timer);
- enable_irq(dev->irq);
- return CF_TRANS_IN_PROGRESS;
- }
- continue;
- }
- ++us_passed;
- } while (us_passed < to_us);
-
- printk(KERN_ERR "cf-mips: wait not busy timeout (%dus)"
- ", status 0x%02x, state %d\n",
- to_us, (unsigned) rareg(ATA_REG_ST,dev), dev->tstate);
- return CF_TRANS_FAILED;
-}
-
-static irqreturn_t cf_irq_handler(int irq, void *dev_id)
-{
- /* While tasklet has not disabled irq, irq will be retried all the time
- * because of ILEVEL matching GPIO pin status => deadlock.
- * To avoid this, we change ILEVEL to 0.
- */
- struct cf_mips_dev *dev=dev_id;
-
- rb500_gpio_set_int_level(0, dev->pin);
- rb500_gpio_set_int_status(0, dev->pin);
-
- del_timer(&dev->to_timer);
- tasklet_schedule(&dev->tasklet);
- return IRQ_HANDLED;
-}
-
-static int do_reset(struct cf_mips_dev *dev)
-{
- printk(KERN_INFO "cf-mips: resetting..\n");
-
- wareg(ATA_REG_DC_SRST, ATA_REG_DC,dev);
- udelay(1); /* FIXME: how long should we wait here? */
- wareg(0, ATA_REG_DC,dev);
-
- return wait_not_busy(30 * SECS, 1,dev);
-}
-
-static int set_multiple(struct cf_mips_dev *dev)
-{
- if (dev->block_size <= 1)
- return CF_TRANS_OK;
-
- wareg(dev->block_size, ATA_REG_SC,dev);
- wareg(ATA_REG_DH_BASE | ATA_REG_DH_LBA, ATA_REG_DH,dev);
- wareg(ATA_CMD_SET_MULTIPLE, ATA_REG_CMD,dev);
-
- return wait_not_busy(10 * SECS, 1,dev);
-}
-
-static int set_cmd(struct cf_mips_dev *dev)
-{
- //DEBUGP(KERN_INFO "cf-mips: ata cmd 0x%02x\n", dev->tcmd);
- // sector_count should be <=24 bits..
- BUG_ON(dev->tsect_start>=0x10000000);
- // This way, it addresses 2^24 * 512 = 128G
-
- if (dev->tsector_count) {
- wareg(dev->tsector_count & 0xff, ATA_REG_SC,dev);
- wareg(dev->tsect_start & 0xff, ATA_REG_SN,dev);
- wareg((dev->tsect_start >> 8) & 0xff, ATA_REG_CL,dev);
- wareg((dev->tsect_start >> 16) & 0xff, ATA_REG_CH,dev);
- }
- wareg(((dev->tsect_start >> 24) & 0x0f) | ATA_REG_DH_BASE | ATA_REG_DH_LBA,
- ATA_REG_DH,dev); /* select drive on all commands */
- wareg(dev->tcmd, ATA_REG_CMD,dev);
- return wait_not_busy(10 * SECS, 1,dev);
-}
-
-static int do_trans(struct cf_mips_dev *dev)
-{
- int res;
- unsigned st;
- int transfered;
-
- //printk("do_trans: %d sectors left\n",dev->tsectors_left);
- while (dev->tsectors_left) {
- transfered = 0;
-
- st = rareg(ATA_REG_ST,dev);
- if (!(st & ATA_REG_ST_DRQ)) {
- printk(KERN_ERR "cf-mips: do_trans without DRQ (status 0x%x)!\n", st);
- if (st & ATA_REG_ST_ERR) {
- int errId = rareg(ATA_REG_ERR,dev);
- printk(KERN_ERR "cf-mips: %s error, status 0x%x, errid 0x%x\n",
- (dev->tread ? "read" : "write"), st, errId);
- }
- return CF_TRANS_FAILED;
- }
- do { /* Fill/read the buffer one block */
- u32 *qbuf, *qend;
- qbuf = (u32 *)dev->tbuf;
- qend = qbuf + CF_SECT_SIZE / sizeof(u32);
- if (dev->tread) {
- while (qbuf!=qend)
- put_unaligned(*DBUF32,qbuf++);
- //*(qbuf++) = *DBUF32;
- }
- else {
- while(qbuf!=qend)
- *DBUF32 = get_unaligned(qbuf++);
- }
-
- dev->tsectors_left--;
- dev->tbuf += CF_SECT_SIZE;
- dev->tbuf_size -= CF_SECT_SIZE;
- transfered++;
- } while (transfered != dev->block_size && dev->tsectors_left > 0);
-
- res = wait_not_busy(10 * SECS, 1,dev);
- if (res != CF_TRANS_OK)
- return res;
- };
-
- st = rareg(ATA_REG_ST,dev);
- if (st & (ATA_REG_ST_DRQ | ATA_REG_ST_DWF | ATA_REG_ST_ERR)) {
- if (st & ATA_REG_ST_DRQ) {
- printk(KERN_ERR "cf-mips: DRQ after all %d sectors are %s"
- ", status 0x%x\n", dev->tsector_count, (dev->tread ? "read" : "written"), st);
- } else if (st & ATA_REG_ST_DWF) {
- printk(KERN_ERR "cf-mips: write fault, status 0x%x\n", st);
- } else {
- int errId = rareg(ATA_REG_ERR,dev);
- printk(KERN_ERR "cf-mips: %s error, status 0x%x, errid 0x%x\n",
- (dev->tread ? "read" : "write"), st, errId);
- }
- return CF_TRANS_FAILED;
- }
- return CF_TRANS_OK;
-}
-
-static int cf_do_state(struct cf_mips_dev *dev)
-{
- int res;
- switch (dev->tstate) { /* fall through everywhere */
- case TS_IDLE:
- dev->tstate = TS_READY;
- if (is_busy(dev)) {
- dev->tstate = TS_AFTER_RESET;
- res = do_reset(dev);
- if (res != CF_TRANS_OK)
- break;
- }
- case TS_AFTER_RESET:
- if (dev->tstate == TS_AFTER_RESET) {
- dev->tstate = TS_READY;
- res = set_multiple(dev);
- if (res != CF_TRANS_OK)
- break;
- }
- case TS_READY:
- dev->tstate = TS_CMD;
- res = set_cmd(dev);
- if (res != CF_TRANS_OK)
- break;;
- case TS_CMD:
- dev->tstate = TS_TRANS;
- case TS_TRANS:
- res = do_trans(dev);
- break;
- default:
- printk(KERN_ERR "cf-mips: BUG: unknown tstate %d\n", dev->tstate);
- return CF_TRANS_FAILED;
- }
- if (res != CF_TRANS_IN_PROGRESS)
- dev->tstate = TS_IDLE;
- return res;
-}
-
-static void cf_do_tasklet(unsigned long dev_l)
-{
- struct cf_mips_dev* dev=(struct cf_mips_dev*) dev_l;
- int res;
-
- disable_irq(dev->irq);
-
- if (dev->tstate == TS_IDLE)
- return; /* can happen when irq is first registered */
-
-#if 0
- DEBUGP(KERN_WARNING "cf-mips: not busy ok (tasklet) status 0x%02x\n",
- (unsigned) rareg(ATA_REG_ST,dev));
-#endif
-
- res = cf_do_state(dev);
- if (res == CF_TRANS_IN_PROGRESS)
- return;
- cf_async_trans_done(dev,res);
-}
-
-static void cf_async_timeout(unsigned long dev_l)
-{
- struct cf_mips_dev* dev=(struct cf_mips_dev*) dev_l;
- disable_irq(dev->irq);
- /* Perhaps send abort to the device? */
- printk(KERN_ERR "cf-mips: wait not busy timeout (%lus)"
- ", status 0x%02x, state %d\n",
- jiffies - dev->irq_enable_time, (unsigned) rareg(ATA_REG_ST,dev), dev->tstate);
- dev->tstate = TS_IDLE;
- cf_async_trans_done(dev,CF_TRANS_FAILED);
-}
-
-int cf_do_transfer(struct cf_mips_dev* dev,sector_t sector, unsigned long nsect,
- char* buffer, int is_write)
-{
- BUG_ON(dev->tstate!=TS_IDLE);
- if (nsect > ATA_MAX_SECT_PER_CMD) {
- printk(KERN_WARNING "cf-mips: sector count %lu out of range\n",nsect);
- return CF_TRANS_FAILED;
- }
- if (sector + nsect > dev->sectors) {
- printk(KERN_WARNING "cf-mips: sector %lu out of range\n",sector);
- return CF_TRANS_FAILED;
- }
- dev->tbuf = buffer;
- dev->tbuf_size = nsect*512;
- dev->tsect_start = sector;
- dev->tsector_count = nsect;
- dev->tsectors_left = dev->tsector_count;
- dev->tread = (is_write)?0:1;
-
- dev->tcmd = (dev->block_size == 1 ?
- (is_write ? ATA_CMD_WRITE_SECTORS : ATA_CMD_READ_SECTORS) :
- (is_write ? ATA_CMD_WRITE_MULTIPLE : ATA_CMD_READ_MULTIPLE));
-
- return cf_do_state(dev);
-}
-
-static int do_identify(struct cf_mips_dev *dev)
-{
- u16 sbuf[CF_SECT_SIZE >> 1];
- int res;
- char tstr[17]; //serial
- char tmp;
- int i;
- BUG_ON(dev->tstate!=TS_IDLE);
- dev->tbuf = (char *) sbuf;
- dev->tbuf_size = CF_SECT_SIZE;
- dev->tsect_start = 0;
- dev->tsector_count = 0;
- dev->tsectors_left = 1;
- dev->tread = 1;
- dev->tcmd = ATA_CMD_IDENTIFY_DRIVE;
-
- DEBUGP(KERN_INFO "cf-mips: identify drive..\n");
- res = cf_do_state(dev);
- if (res == CF_TRANS_IN_PROGRESS) {
- printk(KERN_ERR "cf-mips: BUG: async identify cmd\n");
- return CF_TRANS_FAILED;
- }
- if (res != CF_TRANS_OK)
- return 0;
-
- dev->head = sbuf[3];
- dev->cyl = sbuf[1];
- dev->spt = sbuf[6];
- dev->sectors = ((unsigned long) sbuf[7] << 16) | sbuf[8];
- dev->dtype=sbuf[0];
- memcpy(tstr, &sbuf[12], 16);
- tstr[16] = '\0';
-
- /* Byte-swap the serial number */
- for (i = 0; i<8; i++) {
- tmp = tstr[i * 2];
- tstr[i * 2] = tstr[i * 2 +1];
- tstr[i * 2 + 1] = tmp;
- }
-
- printk(KERN_INFO "cf-mips: %s detected, C/H/S=%d/%d/%d sectors=%u (%uMB) Serial=%s\n",
- (sbuf[0] == 0x848A ? "CF card" : "ATA drive"), dev->cyl, dev->head,
- dev->spt, dev->sectors, dev->sectors >> 11, tstr);
- return 1;
-}
-
-static void init_multiple(struct cf_mips_dev * dev)
-{
- int res;
- DEBUGP(KERN_INFO "cf-mips: detecting block size\n");
-
- dev->block_size = 128; /* max block size = 128 sectors (64KB) */
- do {
- wareg(dev->block_size, ATA_REG_SC,dev);
- wareg(ATA_REG_DH_BASE | ATA_REG_DH_LBA, ATA_REG_DH,dev);
- wareg(ATA_CMD_SET_MULTIPLE, ATA_REG_CMD,dev);
-
- res = wait_not_busy(10 * SECS, 1,dev);
- if (res != CF_TRANS_OK) {
- printk(KERN_ERR "cf-mips: failed to detect block size: busy!\n");
- dev->block_size = 1;
- return;
- }
- if ((rareg(ATA_REG_ST,dev) & ATA_REG_ST_ERR) == 0)
- break;
- dev->block_size /= 2;
- } while (dev->block_size > 1);
-
- printk(KERN_INFO "cf-mips: multiple sectors = %d\n", dev->block_size);
-}
-
-int cf_init(struct cf_mips_dev *dev)
-{
- tasklet_init(&dev->tasklet,cf_do_tasklet,(unsigned long)dev);
- dev->baddr = ioremap_nocache((unsigned long)dev->base, CFDEV_BUF_SIZE);
- if (!dev->baddr) {
- printk(KERN_ERR "cf-mips: cf_init: ioremap for (%lx,%x) failed\n",
- (unsigned long) dev->base, CFDEV_BUF_SIZE);
- return -EBUSY;
- }
-
- if (!cf_present(dev)) {
- printk(KERN_WARNING "cf-mips: cf card not present\n");
- iounmap(dev->baddr);
- return -ENODEV;
- }
-
- if (do_reset(dev) != CF_TRANS_OK) {
- printk(KERN_ERR "cf-mips: cf reset failed\n");
- iounmap(dev->baddr);
- return -EBUSY;
- }
-
- if (!do_identify(dev)) {
- printk(KERN_ERR "cf-mips: cf identify failed\n");
- iounmap(dev->baddr);
- return -EBUSY;
- }
-
-/* set_apm_level(ATA_APM_WITH_STANDBY); */
- init_multiple(dev);
-
- init_timer(&dev->to_timer);
- dev->to_timer.function = cf_async_timeout;
- dev->to_timer.data = (unsigned long)dev;
-
- prepare_cf_irq(dev);
- if (request_irq(dev->irq, cf_irq_handler, 0, "CF Mips", dev)) {
- printk(KERN_ERR "cf-mips: failed to get irq\n");
- iounmap(dev->baddr);
- return -EBUSY;
- }
- /* Disable below would be odd, because request will enable, and the tasklet
- will disable it itself */
- //disable_irq(dev->irq);
-
- dev->async_mode = 1;
-
- return 0;
-}
-
-void cf_cleanup(struct cf_mips_dev *dev)
-{
- iounmap(dev->baddr);
- free_irq(dev->irq, NULL);
-#if REQUEST_MEM_REGION
- release_mem_region((unsigned long)dev->base, CFDEV_BUF_SIZE);
-#endif
-}
-
-
-/*eof*/
+++ /dev/null
-/* CF-mips driver
- This is a block driver for the direct (mmaped) interface to the CF-slot,
- found in Routerboard.com's RB532 board
- See SDK provided from routerboard.com.
-
- Module adapted By P.Christeas <p_christeas@yahoo.com>, 2005-6.
- Cleaned up and adapted to platform_device by Felix Fietkau <nbd@openwrt.org>
-
- This work is redistributed under the terms of the GNU General Public License.
-*/
-
-#ifndef __CFMIPS_ATA_H__
-#define __CFMIPS_ATA_H__
-
-#include <linux/interrupt.h>
-
-#define CFG_DC_DEV1 (void*)0xb8010010
-#define CFG_DC_DEVBASE 0x0
-#define CFG_DC_DEVMASK 0x4
-#define CFG_DC_DEVC 0x8
-#define CFG_DC_DEVTC 0xC
-
-#define CFDEV_BUF_SIZE 0x1000
-#define ATA_CIS_OFFSET 0x200
-#define ATA_REG_OFFSET 0x800
-#define ATA_DBUF_OFFSET 0xC00
-
-#define ATA_REG_FEAT 0x1
-#define ATA_REG_SC 0x2
-#define ATA_REG_SN 0x3
-#define ATA_REG_CL 0x4
-#define ATA_REG_CH 0x5
-#define ATA_REG_DH 0x6
-#define ATA_REG_DH_BASE 0xa0
-#define ATA_REG_DH_LBA 0x40
-#define ATA_REG_DH_DRV 0x10
-#define ATA_REG_CMD 0x7
-#define ATA_REG_ST 0x7
-#define ATA_REG_ST_BUSY 0x80
-#define ATA_REG_ST_RDY 0x40
-#define ATA_REG_ST_DWF 0x20
-#define ATA_REG_ST_DSC 0x10
-#define ATA_REG_ST_DRQ 0x08
-#define ATA_REG_ST_CORR 0x04
-#define ATA_REG_ST_ERR 0x01
-#define ATA_REG_ERR 0xd
-#define ATA_REG_DC 0xe
-#define ATA_REG_DC_IEN 0x02
-#define ATA_REG_DC_SRST 0x04
-
-#define ATA_CMD_READ_SECTORS 0x20
-#define ATA_CMD_WRITE_SECTORS 0x30
-#define ATA_CMD_EXEC_DRIVE_DIAG 0x90
-#define ATA_CMD_READ_MULTIPLE 0xC4
-#define ATA_CMD_WRITE_MULTIPLE 0xC5
-#define ATA_CMD_SET_MULTIPLE 0xC6
-#define ATA_CMD_IDENTIFY_DRIVE 0xEC
-#define ATA_CMD_SET_FEATURES 0xEF
-
-#define ATA_FEATURE_ENABLE_APM 0x05
-#define ATA_FEATURE_DISABLE_APM 0x85
-#define ATA_APM_DISABLED 0x00
-#define ATA_APM_MIN_POWER 0x01
-#define ATA_APM_WITH_STANDBY 0x7f
-#define ATA_APM_WITHOUT_STANDBY 0x80
-#define ATA_APM_MAX_PERFORMANCE 0xfe
-
-#define CF_SECT_SIZE 0x200
-/* That is the ratio CF_SECT_SIZE/512 (the kernel sector size) */
-#define CF_KERNEL_MUL 1
-#define ATA_MAX_SECT_PER_CMD 0x100
-
-#define CF_TRANS_FAILED 0
-#define CF_TRANS_OK 1
-#define CF_TRANS_IN_PROGRESS 2
-
-
-enum trans_state {
- TS_IDLE = 0,
- TS_AFTER_RESET,
- TS_READY,
- TS_CMD,
- TS_TRANS
-};
-
-//
-// #if DEBUG
-// static unsigned long busy_time;
-// #endif
-
-/** Struct to hold the cfdev
-Actually, all the data here only has one instance. However, for
-reasons of programming conformity, it is passed around as a pointer
-*/
-struct cf_mips_dev {
- void *base; /* base address for I/O */
- void *baddr; /* remapped address */
-
- int pin; /* gpio pin */
- int irq; /* gpio irq */
-
- unsigned head;
- unsigned cyl;
- unsigned spt;
- unsigned sectors;
-
- unsigned short block_size;
- unsigned dtype ; // ATA or CF
- struct request_queue *queue;
- struct gendisk *gd;
-
- /* Transaction state */
- enum trans_state tstate;
- char *tbuf;
- unsigned long tbuf_size;
- sector_t tsect_start;
- unsigned tsector_count;
- unsigned tsectors_left;
- int tread;
- unsigned tcmd;
- int async_mode;
- unsigned long irq_enable_time;
-
- struct request *active_req; /* A request is being carried out. Is that different from tstate? */
- int users;
- struct timer_list to_timer;
- struct tasklet_struct tasklet;
-
- /** This lock ensures that the requests to this device are all done
- atomically. Transfers can run in parallel, requests are all queued
- one-by-one */
- spinlock_t lock;
-};
-
-int cf_do_transfer(struct cf_mips_dev* dev,sector_t sector, unsigned long nsect,
- char* buffer, int is_write);
-int cf_init(struct cf_mips_dev* dev);
-void cf_cleanup(struct cf_mips_dev* dev);
-
-void cf_async_trans_done(struct cf_mips_dev* dev, int result);
-// void *cf_get_next_buf(unsigned long *buf_size);
-
-#endif
+++ /dev/null
-/* CF-mips driver
- This is a block driver for the direct (mmaped) interface to the CF-slot,
- found in Routerboard.com's RB532 board
- See SDK provided from routerboard.com.
-
- Module adapted By P.Christeas <p_christeas@yahoo.com>, 2005-6.
- Cleaned up and adapted to platform_device by Felix Fietkau <nbd@openwrt.org>
-
- This work is redistributed under the terms of the GNU General Public License.
-*/
-
-#include <linux/kernel.h>
-#include <linux/module.h>
-#include <linux/init.h>
-#include <linux/time.h>
-#include <linux/wait.h>
-#include <linux/fs.h>
-#include <linux/genhd.h>
-#include <linux/blkdev.h>
-#include <linux/blkpg.h>
-#include <linux/hdreg.h>
-#include <linux/platform_device.h>
-
-#include <asm/uaccess.h>
-#include <asm/io.h>
-#include <asm/gpio.h>
-
-#include <asm/rc32434/rb.h>
-
-#ifdef DEBUG
-#define DEBUGP printk
-#define DLEVEL 1
-#else
-#define DEBUGP(format, args...)
-#define DLEVEL 0
-#endif
-
-#define CF_MIPS_MAJOR 13
-#define MAJOR_NR CF_MIPS_MAJOR
-#define CF_MAX_PART 16 /* max 15 partitions */
-
-#include "ata.h"
-
-//extern struct block_device_operations cf_bdops;
-
-// static struct hd_struct cf_parts[CF_MAX_PART];
-// static int cf_part_sizes[CF_MAX_PART];
-// static int cf_hsect_sizes[CF_MAX_PART];
-// static int cf_max_sectors[CF_MAX_PART];
-// static int cf_blksize_sizes[CF_MAX_PART];
-
-// static spinlock_t lock = SPIN_LOCK_UNLOCKED;
-
-// volatile int cf_busy = 0;
-
-static struct request *active_req = NULL;
-
-static int cf_open (struct inode *, struct file *);
-static int cf_release (struct inode *, struct file *);
-static int cf_ioctl (struct inode *, struct file *, unsigned, unsigned long);
-
-static void cf_request(request_queue_t * q);
-static int cf_transfer(const struct request *req);
-
-/*long (*unlocked_ioctl) (struct file *, unsigned, unsigned long);
-long (*compat_ioctl) (struct file *, unsigned, unsigned long);*/
-// int (*direct_access) (struct block_device *, sector_t, unsigned long *);
-// int (*media_changed) (struct gendisk *);
-// int (*revalidate_disk) (struct gendisk *);
-
-static struct block_device_operations cf_bdops = {
- .owner = THIS_MODULE,
- .open = cf_open,
- .release = cf_release,
- .ioctl = cf_ioctl,
- .media_changed = NULL,
- .unlocked_ioctl = NULL,
- .revalidate_disk = NULL,
- .compat_ioctl = NULL,
- .direct_access = NULL
-};
-
-
-int cf_mips_probe(struct platform_device *pdev)
-{
- struct gendisk* cf_gendisk=NULL;
- struct cf_device *cdev = (struct cf_device *) pdev->dev.platform_data;
- struct cf_mips_dev *dev;
- struct resource *r;
- int reg_result;
-
- reg_result = register_blkdev(MAJOR_NR, "cf-mips");
- if (reg_result < 0) {
- printk(KERN_WARNING "cf-mips: can't get major %d\n", MAJOR_NR);
- return reg_result;
- }
-
- dev = (struct cf_mips_dev *)kmalloc(sizeof(struct cf_mips_dev),GFP_KERNEL);
- if (!dev)
- goto out_err;
- memset(dev, 0, sizeof(struct cf_mips_dev));
- cdev->dev = dev;
-
- dev->pin = cdev->gpio_pin;
- dev->irq = platform_get_irq_byname(pdev, "cf_irq");
- r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "cf_membase");
- dev->base = (void *) r->start;
-
- if (cf_init(dev)) goto out_err;
- printk("init done");
-
- spin_lock_init(&dev->lock);
- dev->queue = blk_init_queue(cf_request,&dev->lock);
- if (!dev->queue){
- printk(KERN_ERR "cf-mips: no mem for queue\n");
- goto out_err;
- }
- blk_queue_max_sectors(dev->queue,ATA_MAX_SECT_PER_CMD);
-
- /* For memory devices, it is always better to avoid crossing segments
- inside the same request. */
-/* if (dev->dtype==0x848A){
- printk(KERN_INFO "Setting boundary for cf to 0x%x",(dev->block_size*512)-1);
- blk_queue_segment_boundary(dev->queue, (dev->block_size*512)-1);
- }*/
-
- dev->gd = alloc_disk(CF_MAX_PART);
- cf_gendisk = dev->gd;
- cdev->gd = dev->gd;
- if (!cf_gendisk) goto out_err; /* Last of these goto's */
-
- cf_gendisk->major = MAJOR_NR;
- cf_gendisk->first_minor = 0;
- cf_gendisk->queue=dev->queue;
- BUG_ON(cf_gendisk->minors != CF_MAX_PART);
- strcpy(cf_gendisk->disk_name,"cfa");
- cf_gendisk->fops = &cf_bdops;
- cf_gendisk->flags = 0 ; /* is not yet GENHD_FL_REMOVABLE */
- cf_gendisk->private_data=dev;
-
- set_capacity(cf_gendisk,dev->sectors * CF_KERNEL_MUL);
-
- /* Let the disk go live */
- add_disk(cf_gendisk);
-#if 0
- result = cf_init();
-
- /* default cfg for all partitions */
- memset(cf_parts, 0, sizeof (cf_parts[0]) * CF_MAX_PART);
- memset(cf_part_sizes, 0, sizeof (cf_part_sizes[0]) * CF_MAX_PART);
- for (i = 0; i < CF_MAX_PART; ++i) {
- cf_hsect_sizes[i] = CF_SECT_SIZE;
- cf_max_sectors[i] = ATA_MAX_SECT_PER_CMD;
- cf_blksize_sizes[i] = BLOCK_SIZE;
- }
-
- /* setup info for whole disk (partition 0) */
- cf_part_sizes[0] = cf_sectors / 2;
- cf_parts[0].nr_sects = cf_sectors;
-
- blk_size[MAJOR_NR] = cf_part_sizes;
- blksize_size[MAJOR_NR] = cf_blksize_sizes;
- max_sectors[MAJOR_NR] = cf_max_sectors;
- hardsect_size[MAJOR_NR] = cf_hsect_sizes;
- read_ahead[MAJOR_NR] = 8; /* (4kB) */
-
- blk_init_queue(BLK_DEFAULT_QUEUE(MAJOR_NR), DEVICE_REQUEST);
-
- add_gendisk(&cf_gendisk);
-#endif
-// printk(KERN_INFO "cf-mips partition check: \n");
-// register_disk(cf_gendisk, MKDEV(MAJOR_NR, 0), CF_MAX_PART,
-// &cf_bdops, dev->sectors);
- return 0;
-
-out_err:
- if (dev->queue){
- blk_cleanup_queue(dev->queue);
- }
- if (reg_result) {
- unregister_blkdev(MAJOR_NR, "cf-mips");
- return reg_result;
- }
- if (dev){
- cf_cleanup(dev);
- kfree(dev);
- }
- return 1;
-}
-
-static int
-cf_mips_remove(struct platform_device *pdev)
-{
- struct cf_device *cdev = (struct cf_device *) pdev->dev.platform_data;
- struct cf_mips_dev *dev = (struct cf_mips_dev *) cdev->dev;
-
- unregister_blkdev(MAJOR_NR, "cf-mips");
- blk_cleanup_queue(dev->queue);
-
- del_gendisk(dev->gd);
- cf_cleanup(dev);
- return 0;
-}
-
-
-static struct platform_driver cf_driver = {
- .driver.name = "rb500-cf",
- .probe = cf_mips_probe,
- .remove = cf_mips_remove,
-};
-
-static int __init cf_mips_init(void)
-{
- printk(KERN_INFO "cf-mips module loaded\n");
- return platform_driver_register(&cf_driver);
-}
-
-static void cf_mips_cleanup(void)
-{
- platform_driver_unregister(&cf_driver);
- printk(KERN_INFO "cf-mips module removed\n");
-}
-
-module_init(cf_mips_init);
-module_exit(cf_mips_cleanup);
-
-MODULE_LICENSE("GPL");
-MODULE_ALIAS_BLOCKDEV_MAJOR(CF_MIPS_MAJOR);
-
-
-static int cf_open(struct inode *inode, struct file *filp)
-{
- struct cf_mips_dev *dev=inode->i_bdev->bd_disk->private_data;
- int minor = MINOR(inode->i_rdev);
-
- if (minor >= CF_MAX_PART)
- return -ENODEV;
- //DEBUGP(KERN_INFO "cf-mips module opened, minor %d\n", minor);
- spin_lock(&dev->lock);
- dev->users++;
- spin_unlock(&dev->lock);
- filp->private_data=dev;
-
- /* dirty workaround to set CFRDY GPIO as an input when some other
- program sets it as an output */
- gpio_set_value(dev->pin, 0);
- return 0; /* success */
-}
-
-static int cf_release(struct inode *inode, struct file *filp)
-{
- int minor = MINOR(inode->i_rdev);
- struct cf_mips_dev *dev=inode->i_bdev->bd_disk->private_data;
- spin_lock(&dev->lock);
- dev->users--;
- spin_unlock(&dev->lock);
- return 0;
-}
-
-static int cf_ioctl(struct inode *inode, struct file *filp,
- unsigned int cmd, unsigned long arg)
-{
- unsigned minor = MINOR(inode->i_rdev);
- struct cf_mips_dev *dev=inode->i_bdev->bd_disk->private_data;
-
- DEBUGP(KERN_INFO "cf_ioctl cmd %u\n", cmd);
- switch (cmd) {
- case BLKRRPART: /* re-read partition table */
- if (!capable(CAP_SYS_ADMIN))
- return -EACCES;
- printk(KERN_INFO "cf-mips partition check: \n");
- register_disk(dev->gd);
- return 0;
-
- case HDIO_GETGEO:
- {
- struct hd_geometry geo;
- geo.cylinders = dev->cyl;
- geo.heads = dev->head;
- geo.sectors = dev->spt;
- geo.start = (*dev->gd->part)[minor].start_sect;
- if (copy_to_user((void *) arg, &geo, sizeof (geo)))
- return -EFAULT;
- }
- return 0;
- }
-
- return -EINVAL; /* unknown command */
-}
-
-static void cf_request(request_queue_t * q)
-{
- struct cf_mips_dev* dev;
-
- struct request * req;
- int status;
-
- /* We could have q->queuedata = dev , but haven't yet. */
- if (active_req)
- return;
-
- while ((req=elv_next_request(q))!=NULL){
- dev=req->rq_disk->private_data;
- status=cf_transfer(req);
- if (status==CF_TRANS_IN_PROGRESS){
- active_req=req;
- return;
- }
- end_request(req,status);
- }
-}
-
-static int cf_transfer(const struct request *req)
-{
- struct cf_mips_dev* dev=req->rq_disk->private_data;
-
- if (!blk_fs_request(req)){
- if (printk_ratelimit())
- printk(KERN_WARNING "cf-mips: skipping non-fs request 0x%x\n",req->cmd[0]);
- return CF_TRANS_FAILED;
- }
-
- return cf_do_transfer(dev,req->sector,req->current_nr_sectors,req->buffer,rq_data_dir(req));
-}
-
-void cf_async_trans_done(struct cf_mips_dev * dev,int result)
-{
- struct request *req;
-
- spin_lock(&dev->lock);
- req=active_req;
- active_req=NULL;
- end_request(req,result);
- spin_unlock(&dev->lock);
-
- spin_lock(&dev->lock);
- cf_request(dev->queue);
- spin_unlock(&dev->lock);
-}
-
+++ /dev/null
-/*
- * linux/drivers/leds/leds-rb500.c
- *
- * Copyright (C) 2006
- * Twente Institute for Wireless and Mobile Communications BV
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details (see file GPLv2).
- *
- * Author: Tjalling Hattink <tjalling.hattink@ti-wmc.nl>
- */
-
-#include <linux/kernel.h>
-#include <linux/init.h>
-#include <linux/platform_device.h>
-#include <linux/leds.h>
-#include <asm/rc32434/rb.h>
-
-static void rb500led_amber_set(struct led_classdev *led_cdev, enum led_brightness value)
-{
- if (value)
- changeLatchU5(LO_ULED, 0);
- else
- changeLatchU5(0, LO_ULED);
-}
-
-static struct led_classdev rb500_amber_led = {
- .name = "rb500led:amber",
- .default_trigger = "ide-disk",
- .brightness_set = rb500led_amber_set,
-};
-
-static int rb500led_probe(struct platform_device *pdev)
-{
- int ret;
-
- changeLatchU5(0, LO_ULED);
-
- ret = led_classdev_register(&pdev->dev, &rb500_amber_led);
-
- return ret;
-}
-
-static int rb500led_remove(struct platform_device *pdev)
-{
- led_classdev_unregister(&rb500_amber_led);
-
- return 0;
-}
-
-static struct platform_driver rb500led_driver = {
- .probe = rb500led_probe,
- .remove = rb500led_remove,
- .driver = {
- .name = "rb500-led",
- },
-};
-
-static int __init rb500led_init(void)
-{
- return platform_driver_register(&rb500led_driver);
-}
-
-static void __exit rb500led_exit(void)
-{
- platform_driver_unregister(&rb500led_driver);
-}
-
-module_init(rb500led_init);
-module_exit(rb500led_exit);
-
-MODULE_AUTHOR("tjalling.hattink@ti-wmc.nl");
-MODULE_DESCRIPTION("Mikrotik RB500 LED driver");
-MODULE_LICENSE("GPL");
+++ /dev/null
-/**************************************************************************
- *
- * BRIEF MODULE DESCRIPTION
- * Driver for the IDT RC32434 on-chip ethernet controller.
- *
- * Copyright 2004 IDT Inc. (rischelp@idt.com)
- * Copyright 2006 Felix Fietkau <nbd@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- **************************************************************************
- * May 2004 rkt, neb
- *
- * Based on the driver developed by B. Maruthanayakam, H. Kou and others.
- *
- * Aug 2004 Sadik
- *
- * Added NAPI
- *
- **************************************************************************
- */
-
-#include <linux/autoconf.h>
-#include <linux/module.h>
-#include <linux/kernel.h>
-#include <linux/moduleparam.h>
-#include <linux/sched.h>
-#include <linux/ctype.h>
-#include <linux/types.h>
-#include <linux/fcntl.h>
-#include <linux/interrupt.h>
-#include <linux/ptrace.h>
-#include <linux/init.h>
-#include <linux/ioport.h>
-#include <linux/proc_fs.h>
-#include <linux/in.h>
-#include <linux/slab.h>
-#include <linux/string.h>
-#include <linux/delay.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/errno.h>
-#include <linux/platform_device.h>
-#include <asm/bootinfo.h>
-#include <asm/system.h>
-#include <asm/bitops.h>
-#include <asm/pgtable.h>
-#include <asm/segment.h>
-#include <asm/io.h>
-#include <asm/dma.h>
-
-#include <asm/rc32434/rb.h>
-#include "rc32434_eth.h"
-
-#define DRIVER_VERSION "(mar2904)"
-
-#define DRIVER_NAME "rc32434 Ethernet driver. " DRIVER_VERSION
-
-#define STATION_ADDRESS_HIGH(dev) (((dev)->dev_addr[0] << 8) | \
- ((dev)->dev_addr[1]))
-#define STATION_ADDRESS_LOW(dev) (((dev)->dev_addr[2] << 24) | \
- ((dev)->dev_addr[3] << 16) | \
- ((dev)->dev_addr[4] << 8) | \
- ((dev)->dev_addr[5]))
-
-#define MII_CLOCK 1250000 /* no more than 2.5MHz */
-#define CONFIG_IDT_USE_NAPI 1
-
-
-static inline void rc32434_abort_tx(struct net_device *dev)
-{
- struct rc32434_local *lp = (struct rc32434_local *)dev->priv;
- rc32434_abort_dma(dev, lp->tx_dma_regs);
-
-}
-
-static inline void rc32434_abort_rx(struct net_device *dev)
-{
- struct rc32434_local *lp = (struct rc32434_local *)dev->priv;
- rc32434_abort_dma(dev, lp->rx_dma_regs);
-
-}
-
-static inline void rc32434_start_tx(struct rc32434_local *lp, volatile DMAD_t td)
-{
- rc32434_start_dma(lp->tx_dma_regs, CPHYSADDR(td));
-}
-
-static inline void rc32434_start_rx(struct rc32434_local *lp, volatile DMAD_t rd)
-{
- rc32434_start_dma(lp->rx_dma_regs, CPHYSADDR(rd));
-}
-
-static inline void rc32434_chain_tx(struct rc32434_local *lp, volatile DMAD_t td)
-{
- rc32434_chain_dma(lp->tx_dma_regs, CPHYSADDR(td));
-}
-
-static inline void rc32434_chain_rx(struct rc32434_local *lp, volatile DMAD_t rd)
-{
- rc32434_chain_dma(lp->rx_dma_regs, CPHYSADDR(rd));
-}
-
-#ifdef RC32434_PROC_DEBUG
-static int rc32434_read_proc(char *buf, char **start, off_t fpos,
- int length, int *eof, void *data)
-{
- struct net_device *dev = (struct net_device *)data;
- struct rc32434_local *lp = (struct rc32434_local *)dev->priv;
- int len = 0;
-
- /* print out header */
- len += sprintf(buf + len, "\n\tKorina Ethernet Debug\n\n");
- len += sprintf (buf + len,
- "DMA halt count = %10d, DMA run count = %10d\n",
- lp->dma_halt_cnt, lp->dma_run_cnt);
-
- if (fpos >= len) {
- *start = buf;
- *eof = 1;
- return 0;
- }
- *start = buf + fpos;
-
- if ((len -= fpos) > length)
- return length;
- *eof = 1;
-
- return len;
-
-}
-#endif
-
-
-/*
- * Restart the RC32434 ethernet controller.
- */
-static int rc32434_restart(struct net_device *dev)
-{
- struct rc32434_local *lp = (struct rc32434_local *)dev->priv;
-
- /*
- * Disable interrupts
- */
- disable_irq(lp->rx_irq);
- disable_irq(lp->tx_irq);
-#ifdef RC32434_REVISION
- disable_irq(lp->ovr_irq);
-#endif
- disable_irq(lp->und_irq);
-
- /* Mask F E bit in Tx DMA */
- __raw_writel(__raw_readl(&lp->tx_dma_regs->dmasm) | DMASM_f_m | DMASM_e_m, &lp->tx_dma_regs->dmasm);
- /* Mask D H E bit in Rx DMA */
- __raw_writel(__raw_readl(&lp->rx_dma_regs->dmasm) | DMASM_d_m | DMASM_h_m | DMASM_e_m, &lp->rx_dma_regs->dmasm);
-
- rc32434_init(dev);
- rc32434_multicast_list(dev);
-
- enable_irq(lp->und_irq);
-#ifdef RC32434_REVISION
- enable_irq(lp->ovr_irq);
-#endif
- enable_irq(lp->tx_irq);
- enable_irq(lp->rx_irq);
-
- return 0;
-}
-
-static int rc32434_probe(struct platform_device *pdev)
-{
- struct korina_device *bif = (struct korina_device *) pdev->dev.platform_data;
- struct rc32434_local *lp = NULL;
- struct net_device *dev = NULL;
- struct resource *r;
- int i, retval,err;
-
- dev = alloc_etherdev(sizeof(struct rc32434_local));
- if(!dev) {
- ERR("Korina_eth: alloc_etherdev failed\n");
- return -1;
- }
-
- platform_set_drvdata(pdev, dev);
- SET_NETDEV_DEV(dev, &pdev->dev);
- bif->dev = dev;
-
- memcpy(dev->dev_addr, bif->mac, 6);
-
- /* Initialize the device structure. */
- if (dev->priv == NULL) {
- lp = (struct rc32434_local *)kmalloc(sizeof(*lp), GFP_KERNEL);
- memset(lp, 0, sizeof(struct rc32434_local));
- }
- else {
- lp = (struct rc32434_local *)dev->priv;
- }
-
- lp->rx_irq = platform_get_irq_byname(pdev, "korina_rx");
- lp->tx_irq = platform_get_irq_byname(pdev, "korina_tx");
- lp->ovr_irq = platform_get_irq_byname(pdev, "korina_ovr");
- lp->und_irq = platform_get_irq_byname(pdev, "korina_und");
-
- r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "korina_regs");
- dev->base_addr = r->start;
- lp->eth_regs = ioremap_nocache(r->start, r->end - r->start);
- if (!lp->eth_regs) {
- ERR("Can't remap eth registers\n");
- retval = -ENXIO;
- goto probe_err_out;
- }
-
- r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "korina_dma_rx");
- lp->rx_dma_regs = ioremap_nocache(r->start, r->end - r->start);
- if (!lp->rx_dma_regs) {
- ERR("Can't remap Rx DMA registers\n");
- retval = -ENXIO;
- goto probe_err_out;
- }
-
- r = platform_get_resource_byname(pdev, IORESOURCE_MEM, "korina_dma_tx");
- lp->tx_dma_regs = ioremap_nocache(r->start, r->end - r->start);
- if (!lp->tx_dma_regs) {
- ERR("Can't remap Tx DMA registers\n");
- retval = -ENXIO;
- goto probe_err_out;
- }
-
-#ifdef RC32434_PROC_DEBUG
- lp->ps = create_proc_read_entry (bif->name, 0, proc_net,
- rc32434_read_proc, dev);
-#endif
-
- lp->td_ring = (DMAD_t)kmalloc(TD_RING_SIZE + RD_RING_SIZE, GFP_KERNEL);
- if (!lp->td_ring) {
- ERR("Can't allocate descriptors\n");
- retval = -ENOMEM;
- goto probe_err_out;
- }
-
- dma_cache_inv((unsigned long)(lp->td_ring), TD_RING_SIZE + RD_RING_SIZE);
-
- /* now convert TD_RING pointer to KSEG1 */
- lp->td_ring = (DMAD_t )KSEG1ADDR(lp->td_ring);
- lp->rd_ring = &lp->td_ring[RC32434_NUM_TDS];
-
-
- spin_lock_init(&lp->lock);
-
- /* just use the rx dma irq */
- dev->irq = lp->rx_irq;
-
- dev->priv = lp;
- lp->dev = dev;
-
- dev->open = rc32434_open;
- dev->stop = rc32434_close;
- dev->hard_start_xmit = rc32434_send_packet;
- dev->get_stats = rc32434_get_stats;
- dev->set_multicast_list = &rc32434_multicast_list;
- dev->tx_timeout = rc32434_tx_timeout;
- dev->watchdog_timeo = RC32434_TX_TIMEOUT;
-
- netif_napi_add(dev, &lp->napi, rc32434_poll, 64);
- lp->tx_tasklet = kmalloc(sizeof(struct tasklet_struct), GFP_KERNEL);
- tasklet_init(lp->tx_tasklet, rc32434_tx_tasklet, (unsigned long)dev);
-
- if ((err = register_netdev(dev))) {
- printk(KERN_ERR "rc32434 ethernet. Cannot register net device %d\n", err);
- free_netdev(dev);
- retval = -EINVAL;
- goto probe_err_out;
- }
-
- INFO("Rx IRQ %d, Tx IRQ %d, ", lp->rx_irq, lp->tx_irq);
- for (i = 0; i < 6; i++) {
- printk("%2.2x", dev->dev_addr[i]);
- if (i<5)
- printk(":");
- }
- printk("\n");
-
- return 0;
-
- probe_err_out:
- rc32434_cleanup_module();
- ERR(" failed. Returns %d\n", retval);
- return retval;
-
-}
-
-static int rc32434_remove(struct platform_device *pdev)
-{
- struct korina_device *bif = (struct korina_device *) pdev->dev.platform_data;
-
- if (bif->dev != NULL) {
- struct rc32434_local *lp = (struct rc32434_local *)bif->dev->priv;
- if (lp != NULL) {
- if (lp->eth_regs)
- iounmap((void*)lp->eth_regs);
- if (lp->rx_dma_regs)
- iounmap((void*)lp->rx_dma_regs);
- if (lp->tx_dma_regs)
- iounmap((void*)lp->tx_dma_regs);
- if (lp->td_ring)
- kfree((void*)KSEG0ADDR(lp->td_ring));
-
-#ifdef RC32434_PROC_DEBUG
- if (lp->ps) {
- remove_proc_entry(bif->name, proc_net);
- }
-#endif
- kfree(lp);
- }
-
- platform_set_drvdata(pdev, NULL);
- unregister_netdev(bif->dev);
- free_netdev(bif->dev);
- kfree(bif->dev);
- }
- return 0;
-}
-
-
-static int rc32434_open(struct net_device *dev)
-{
- struct rc32434_local *lp = (struct rc32434_local *)dev->priv;
-
- /* Initialize */
- if (rc32434_init(dev)) {
- ERR("Error: cannot open the Ethernet device\n");
- return -EAGAIN;
- }
-
- /* Install the interrupt handler that handles the Done Finished Ovr and Und Events */
- if (request_irq(lp->rx_irq, &rc32434_rx_dma_interrupt,
- IRQF_SHARED | IRQF_DISABLED,
- "Korina ethernet Rx", dev)) {
- ERR(": unable to get Rx DMA IRQ %d\n",
- lp->rx_irq);
- return -EAGAIN;
- }
- if (request_irq(lp->tx_irq, &rc32434_tx_dma_interrupt,
- IRQF_SHARED | IRQF_DISABLED,
- "Korina ethernet Tx", dev)) {
- ERR(": unable to get Tx DMA IRQ %d\n",
- lp->tx_irq);
- free_irq(lp->rx_irq, dev);
- return -EAGAIN;
- }
-
-#ifdef RC32434_REVISION
- /* Install handler for overrun error. */
- if (request_irq(lp->ovr_irq, &rc32434_ovr_interrupt,
- IRQF_SHARED | IRQF_DISABLED,
- "Ethernet Overflow", dev)) {
- ERR(": unable to get OVR IRQ %d\n",
- lp->ovr_irq);
- free_irq(lp->rx_irq, dev);
- free_irq(lp->tx_irq, dev);
- return -EAGAIN;
- }
-#endif
-
- /* Install handler for underflow error. */
- if (request_irq(lp->und_irq, &rc32434_und_interrupt,
- IRQF_SHARED | IRQF_DISABLED,
- "Ethernet Underflow", dev)) {
- ERR(": unable to get UND IRQ %d\n",
- lp->und_irq);
- free_irq(lp->rx_irq, dev);
- free_irq(lp->tx_irq, dev);
-#ifdef RC32434_REVISION
- free_irq(lp->ovr_irq, dev);
-#endif
- return -EAGAIN;
- }
-
-
- return 0;
-}
-
-
-
-
-static int rc32434_close(struct net_device *dev)
-{
- struct rc32434_local *lp = (struct rc32434_local *)dev->priv;
- u32 tmp;
-
- /* Disable interrupts */
- disable_irq(lp->rx_irq);
- disable_irq(lp->tx_irq);
-#ifdef RC32434_REVISION
- disable_irq(lp->ovr_irq);
-#endif
- disable_irq(lp->und_irq);
-
- tmp = __raw_readl(&lp->tx_dma_regs->dmasm);
- tmp = tmp | DMASM_f_m | DMASM_e_m;
- __raw_writel(tmp, &lp->tx_dma_regs->dmasm);
-
- tmp = __raw_readl(&lp->rx_dma_regs->dmasm);
- tmp = tmp | DMASM_d_m | DMASM_h_m | DMASM_e_m;
- __raw_writel(tmp, &lp->rx_dma_regs->dmasm);
-
- free_irq(lp->rx_irq, dev);
- free_irq(lp->tx_irq, dev);
-#ifdef RC32434_REVISION
- free_irq(lp->ovr_irq, dev);
-#endif
- free_irq(lp->und_irq, dev);
- return 0;
-}
-
-
-/* transmit packet */
-static int rc32434_send_packet(struct sk_buff *skb, struct net_device *dev)
-{
- struct rc32434_local *lp = (struct rc32434_local *)dev->priv;
- unsigned long flags;
- u32 length;
- DMAD_t td;
-
-
- spin_lock_irqsave(&lp->lock, flags);
-
- td = &lp->td_ring[lp->tx_chain_tail];
-
- /* stop queue when full, drop pkts if queue already full */
- if(lp->tx_count >= (RC32434_NUM_TDS - 2)) {
- lp->tx_full = 1;
-
- if(lp->tx_count == (RC32434_NUM_TDS - 2)) {
- netif_stop_queue(dev);
- }
- else {
- lp->stats.tx_dropped++;
- dev_kfree_skb_any(skb);
- spin_unlock_irqrestore(&lp->lock, flags);
- return 1;
- }
- }
-
- lp->tx_count ++;
-
- lp->tx_skb[lp->tx_chain_tail] = skb;
-
- length = skb->len;
- dma_cache_wback((u32)skb->data, skb->len);
-
- /* Setup the transmit descriptor. */
- dma_cache_inv((u32) td, sizeof(*td));
- td->ca = CPHYSADDR(skb->data);
-
- if(__raw_readl(&(lp->tx_dma_regs->dmandptr)) == 0) {
- if( lp->tx_chain_status == empty ) {
- td->control = DMA_COUNT(length) |DMAD_cof_m |DMAD_iof_m; /* Update tail */
- lp->tx_chain_tail = (lp->tx_chain_tail + 1) & RC32434_TDS_MASK; /* Move tail */
- __raw_writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]), &(lp->tx_dma_regs->dmandptr)); /* Write to NDPTR */
- lp->tx_chain_head = lp->tx_chain_tail; /* Move head to tail */
- }
- else {
- td->control = DMA_COUNT(length) |DMAD_cof_m|DMAD_iof_m; /* Update tail */
- lp->td_ring[(lp->tx_chain_tail-1)& RC32434_TDS_MASK].control &= ~(DMAD_cof_m); /* Link to prev */
- lp->td_ring[(lp->tx_chain_tail-1)& RC32434_TDS_MASK].link = CPHYSADDR(td); /* Link to prev */
- lp->tx_chain_tail = (lp->tx_chain_tail + 1) & RC32434_TDS_MASK; /* Move tail */
- __raw_writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]), &(lp->tx_dma_regs->dmandptr)); /* Write to NDPTR */
- lp->tx_chain_head = lp->tx_chain_tail; /* Move head to tail */
- lp->tx_chain_status = empty;
- }
- }
- else {
- if( lp->tx_chain_status == empty ) {
- td->control = DMA_COUNT(length) |DMAD_cof_m |DMAD_iof_m; /* Update tail */
- lp->tx_chain_tail = (lp->tx_chain_tail + 1) & RC32434_TDS_MASK; /* Move tail */
- lp->tx_chain_status = filled;
- }
- else {
- td->control = DMA_COUNT(length) |DMAD_cof_m |DMAD_iof_m; /* Update tail */
- lp->td_ring[(lp->tx_chain_tail-1)& RC32434_TDS_MASK].control &= ~(DMAD_cof_m); /* Link to prev */
- lp->td_ring[(lp->tx_chain_tail-1)& RC32434_TDS_MASK].link = CPHYSADDR(td); /* Link to prev */
- lp->tx_chain_tail = (lp->tx_chain_tail + 1) & RC32434_TDS_MASK; /* Move tail */
- }
- }
- dma_cache_wback((u32) td, sizeof(*td));
-
- dev->trans_start = jiffies;
-
- spin_unlock_irqrestore(&lp->lock, flags);
-
- return 0;
-}
-
-
-/* Ethernet MII-PHY Handler */
-static void rc32434_mii_handler(unsigned long data)
-{
- struct net_device *dev = (struct net_device *)data;
- struct rc32434_local *lp = (struct rc32434_local *)dev->priv;
- unsigned long flags;
- unsigned long duplex_status;
- int port_addr = (lp->rx_irq == 0x2c? 1:0) << 8;
-
- spin_lock_irqsave(&lp->lock, flags);
-
- /* Two ports are using the same MII, the difference is the PHY address */
- __raw_writel(0, &rc32434_eth0_regs->miimcfg);
- __raw_writel(0, &rc32434_eth0_regs->miimcmd);
- __raw_writel(port_addr |0x05, &rc32434_eth0_regs->miimaddr);
- __raw_writel(MIIMCMD_scn_m, &rc32434_eth0_regs->miimcmd);
- while(__raw_readl(&rc32434_eth0_regs->miimind) & MIIMIND_nv_m);
-
- ERR("irq:%x port_addr:%x RDD:%x\n",
- lp->rx_irq, port_addr, __raw_readl(&rc32434_eth0_regs->miimrdd));
- duplex_status = (__raw_readl(&rc32434_eth0_regs->miimrdd) & 0x140)? ETHMAC2_fd_m: 0;
- if(duplex_status != lp->duplex_mode) {
- ERR("The MII-PHY is Auto-negotiated to %s-Duplex mode for Eth-%x\n", duplex_status? "Full":"Half", lp->rx_irq == 0x2c? 1:0);
- lp->duplex_mode = duplex_status;
- rc32434_restart(dev);
- }
-
- lp->mii_phy_timer.expires = jiffies + 10 * HZ;
- add_timer(&lp->mii_phy_timer);
-
- spin_unlock_irqrestore(&lp->lock, flags);
-
-}
-
-#ifdef RC32434_REVISION
-/* Ethernet Rx Overflow interrupt */
-static irqreturn_t
-rc32434_ovr_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = (struct net_device *)dev_id;
- struct rc32434_local *lp;
- unsigned int ovr;
- irqreturn_t retval = IRQ_NONE;
-
- ASSERT(dev != NULL);
-
- lp = (struct rc32434_local *)dev->priv;
- spin_lock(&lp->lock);
- ovr = __raw_readl(&lp->eth_regs->ethintfc);
-
- if(ovr & ETHINTFC_ovr_m) {
- netif_stop_queue(dev);
-
- /* clear OVR bit */
- __raw_writel((ovr & ~ETHINTFC_ovr_m), &lp->eth_regs->ethintfc);
-
- /* Restart interface */
- rc32434_restart(dev);
- retval = IRQ_HANDLED;
- }
- spin_unlock(&lp->lock);
-
- return retval;
-}
-
-#endif
-
-
-/* Ethernet Tx Underflow interrupt */
-static irqreturn_t
-rc32434_und_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = (struct net_device *)dev_id;
- struct rc32434_local *lp;
- unsigned int und;
- irqreturn_t retval = IRQ_NONE;
-
- ASSERT(dev != NULL);
-
- lp = (struct rc32434_local *)dev->priv;
-
- spin_lock(&lp->lock);
-
- und = __raw_readl(&lp->eth_regs->ethintfc);
-
- if(und & ETHINTFC_und_m) {
- netif_stop_queue(dev);
-
- __raw_writel((und & ~ETHINTFC_und_m), &lp->eth_regs->ethintfc);
-
- /* Restart interface */
- rc32434_restart(dev);
- retval = IRQ_HANDLED;
- }
-
- spin_unlock(&lp->lock);
-
- return retval;
-}
-
-
-/* Ethernet Rx DMA interrupt */
-static irqreturn_t
-rc32434_rx_dma_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = (struct net_device *)dev_id;
- struct rc32434_local* lp;
- volatile u32 dmas,dmasm;
- irqreturn_t retval;
-
- ASSERT(dev != NULL);
-
- lp = (struct rc32434_local *)dev->priv;
-
- dmas = __raw_readl(&lp->rx_dma_regs->dmas);
- if(dmas & (DMAS_d_m|DMAS_h_m|DMAS_e_m)) {
- /* Mask D H E bit in Rx DMA */
- dmasm = __raw_readl(&lp->rx_dma_regs->dmasm);
- __raw_writel(dmasm | (DMASM_d_m | DMASM_h_m | DMASM_e_m), &lp->rx_dma_regs->dmasm);
- netif_rx_schedule(dev, &lp->napi);
-
- if (dmas & DMAS_e_m)
- ERR(": DMA error\n");
-
- retval = IRQ_HANDLED;
- }
- else
- retval = IRQ_NONE;
-
- return retval;
-}
-
-
-static int rc32434_rx(struct net_device *dev, int limit)
-{
- struct rc32434_local *lp = netdev_priv(dev);
- volatile DMAD_t rd = &lp->rd_ring[lp->rx_next_done];
- struct sk_buff *skb, *skb_new;
- u8 *pkt_buf;
- u32 devcs, pkt_len, dmas, rx_free_desc;
- u32 pktuncrc_len;
- int count;
-
- dma_cache_inv((u32)rd, sizeof(*rd));
- for (count = 0; count < limit; count++) {
- /* init the var. used for the later operations within the while loop */
- skb_new = NULL;
- devcs = rd->devcs;
- pkt_len = RCVPKT_LENGTH(devcs);
- skb = lp->rx_skb[lp->rx_next_done];
-
- if ((devcs & ( ETHRX_ld_m)) != ETHRX_ld_m) {
- /* check that this is a whole packet */
- /* WARNING: DMA_FD bit incorrectly set in Rc32434 (errata ref #077) */
- lp->stats.rx_errors++;
- lp->stats.rx_dropped++;
- }
- else if ( (devcs & ETHRX_rok_m) ) {
-
- /* must be the (first and) last descriptor then */
- pkt_buf = (u8*)lp->rx_skb[lp->rx_next_done]->data;
-
- pktuncrc_len = pkt_len - 4;
- /* invalidate the cache */
- dma_cache_inv((unsigned long)pkt_buf, pktuncrc_len);
-
- /* Malloc up new buffer. */
- skb_new = netdev_alloc_skb(dev, RC32434_RBSIZE + 2);
-
- if (skb_new != NULL){
- /* Make room */
- skb_put(skb, pktuncrc_len);
-
- skb->protocol = eth_type_trans(skb, dev);
-
- /* pass the packet to upper layers */
- netif_receive_skb(skb);
-
- dev->last_rx = jiffies;
- lp->stats.rx_packets++;
- lp->stats.rx_bytes += pktuncrc_len;
-
- if (IS_RCV_MP(devcs))
- lp->stats.multicast++;
-
- /* 16 bit align */
- skb_reserve(skb_new, 2);
-
- skb_new->dev = dev;
- lp->rx_skb[lp->rx_next_done] = skb_new;
- }
- else {
- ERR("no memory, dropping rx packet.\n");
- lp->stats.rx_errors++;
- lp->stats.rx_dropped++;
- }
- }
- else {
- /* This should only happen if we enable accepting broken packets */
- lp->stats.rx_errors++;
- lp->stats.rx_dropped++;
-
- /* add statistics counters */
- if (IS_RCV_CRC_ERR(devcs)) {
- DBG(2, "RX CRC error\n");
- lp->stats.rx_crc_errors++;
- }
- else if (IS_RCV_LOR_ERR(devcs)) {
- DBG(2, "RX LOR error\n");
- lp->stats.rx_length_errors++;
- }
- else if (IS_RCV_LE_ERR(devcs)) {
- DBG(2, "RX LE error\n");
- lp->stats.rx_length_errors++;
- }
- else if (IS_RCV_OVR_ERR(devcs)) {
- lp->stats.rx_over_errors++;
- }
- else if (IS_RCV_CV_ERR(devcs)) {
- /* code violation */
- DBG(2, "RX CV error\n");
- lp->stats.rx_frame_errors++;
- }
- else if (IS_RCV_CES_ERR(devcs)) {
- DBG(2, "RX Preamble error\n");
- }
- }
- rd->devcs = 0;
-
- /* restore descriptor's curr_addr */
- if(skb_new) {
- rd->ca = CPHYSADDR(skb_new->data);
- }
- else
- rd->ca = CPHYSADDR(skb->data);
-
- rd->control = DMA_COUNT(RC32434_RBSIZE) |DMAD_cod_m |DMAD_iod_m;
- lp->rd_ring[(lp->rx_next_done-1)& RC32434_RDS_MASK].control &= ~(DMAD_cod_m);
-
- lp->rx_next_done = (lp->rx_next_done + 1) & RC32434_RDS_MASK;
- dma_cache_wback((u32)rd, sizeof(*rd));
- rd = &lp->rd_ring[lp->rx_next_done];
- __raw_writel( ~DMAS_d_m, &lp->rx_dma_regs->dmas);
- }
-
- dmas = __raw_readl(&lp->rx_dma_regs->dmas);
-
- if(dmas & DMAS_h_m) {
- /* Mask off halt and error bits */
- __raw_writel( ~(DMAS_h_m | DMAS_e_m), &lp->rx_dma_regs->dmas);
-#ifdef RC32434_PROC_DEBUG
- lp->dma_halt_cnt++;
-#endif
- rd->devcs = 0;
- skb = lp->rx_skb[lp->rx_next_done];
- rd->ca = CPHYSADDR(skb->data);
- dma_cache_wback((u32)rd, sizeof(*rd));
- rc32434_chain_rx(lp,rd);
- }
-
- return count;
-}
-
-static int rc32434_poll(struct napi_struct *napi, int budget)
-{
- struct rc32434_local *lp =
- container_of(napi, struct rc32434_local, napi);
- struct net_device *dev = lp->dev;
- int work_done;
-
- work_done = rc32434_rx(dev, budget);
- if (work_done < budget) {
- netif_rx_complete(dev, napi);
-
- /* Mask off interrupts */
- writel(readl(&lp->rx_dma_regs->dmasm) &
- (DMASM_d_m | DMASM_h_m |DMASM_e_m),
- &lp->rx_dma_regs->dmasm);
- }
- return work_done;
-}
-
-
-
-/* Ethernet Tx DMA interrupt */
-static irqreturn_t
-rc32434_tx_dma_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = (struct net_device *)dev_id;
- struct rc32434_local *lp;
- volatile u32 dmas,dmasm;
- irqreturn_t retval;
-
- ASSERT(dev != NULL);
-
- lp = (struct rc32434_local *)dev->priv;
-
- dmas = __raw_readl(&lp->tx_dma_regs->dmas);
-
- if (dmas & (DMAS_f_m | DMAS_e_m)) {
- dmasm = __raw_readl(&lp->tx_dma_regs->dmasm);
- /* Mask F E bit in Tx DMA */
- __raw_writel(dmasm | (DMASM_f_m | DMASM_e_m), &lp->tx_dma_regs->dmasm);
-
- tasklet_hi_schedule(lp->tx_tasklet);
-
- if(lp->tx_chain_status == filled && (__raw_readl(&(lp->tx_dma_regs->dmandptr)) == 0)) {
- __raw_writel(CPHYSADDR(&lp->td_ring[lp->tx_chain_head]), &(lp->tx_dma_regs->dmandptr));
- lp->tx_chain_status = empty;
- lp->tx_chain_head = lp->tx_chain_tail;
- dev->trans_start = jiffies;
- }
-
- if (dmas & DMAS_e_m)
- ERR(": DMA error\n");
-
- retval = IRQ_HANDLED;
- }
- else
- retval = IRQ_NONE;
-
- return retval;
-}
-
-
-static void rc32434_tx_tasklet(unsigned long tx_data_dev)
-{
- struct net_device *dev = (struct net_device *)tx_data_dev;
- struct rc32434_local* lp = (struct rc32434_local *)dev->priv;
- volatile DMAD_t td = &lp->td_ring[lp->tx_next_done];
- u32 devcs;
- unsigned long flags;
- volatile u32 dmas;
-
- spin_lock_irqsave(&lp->lock, flags);
-
- /* process all desc that are done */
- while(IS_DMA_FINISHED(td->control)) {
- if(lp->tx_full == 1) {
- netif_wake_queue(dev);
- lp->tx_full = 0;
- }
-
- devcs = lp->td_ring[lp->tx_next_done].devcs;
- if ((devcs & (ETHTX_fd_m | ETHTX_ld_m)) != (ETHTX_fd_m | ETHTX_ld_m)) {
- lp->stats.tx_errors++;
- lp->stats.tx_dropped++;
-
- /* should never happen */
- DBG(1, __FUNCTION__ ": split tx ignored\n");
- }
- else if (IS_TX_TOK(devcs)) {
- lp->stats.tx_packets++;
- lp->stats.tx_bytes+=lp->tx_skb[lp->tx_next_done]->len;
- }
- else {
- lp->stats.tx_errors++;
- lp->stats.tx_dropped++;
-
- /* underflow */
- if (IS_TX_UND_ERR(devcs))
- lp->stats.tx_fifo_errors++;
-
- /* oversized frame */
- if (IS_TX_OF_ERR(devcs))
- lp->stats.tx_aborted_errors++;
-
- /* excessive deferrals */
- if (IS_TX_ED_ERR(devcs))
- lp->stats.tx_carrier_errors++;
-
- /* collisions: medium busy */
- if (IS_TX_EC_ERR(devcs))
- lp->stats.collisions++;
-
- /* late collision */
- if (IS_TX_LC_ERR(devcs))
- lp->stats.tx_window_errors++;
-
- }
-
- /* We must always free the original skb */
- if (lp->tx_skb[lp->tx_next_done] != NULL) {
- dev_kfree_skb_any(lp->tx_skb[lp->tx_next_done]);
- lp->tx_skb[lp->tx_next_done] = NULL;
- }
-
- lp->td_ring[lp->tx_next_done].control = DMAD_iof_m;
- lp->td_ring[lp->tx_next_done].devcs = ETHTX_fd_m | ETHTX_ld_m;
- lp->td_ring[lp->tx_next_done].link = 0;
- lp->td_ring[lp->tx_next_done].ca = 0;
- lp->tx_count --;
-
- /* go on to next transmission */
- lp->tx_next_done = (lp->tx_next_done + 1) & RC32434_TDS_MASK;
- td = &lp->td_ring[lp->tx_next_done];
-
- }
-
- dmas = __raw_readl(&lp->tx_dma_regs->dmas);
- __raw_writel( ~dmas, &lp->tx_dma_regs->dmas);
-
- /* Enable F E bit in Tx DMA */
- __raw_writel(__raw_readl(&lp->tx_dma_regs->dmasm) & ~(DMASM_f_m | DMASM_e_m), &lp->tx_dma_regs->dmasm);
- spin_unlock_irqrestore(&lp->lock, flags);
-
-}
-
-
-static struct net_device_stats * rc32434_get_stats(struct net_device *dev)
-{
- struct rc32434_local *lp = (struct rc32434_local *)dev->priv;
- return &lp->stats;
-}
-
-
-/*
- * Set or clear the multicast filter for this adaptor.
- */
-static void rc32434_multicast_list(struct net_device *dev)
-{
- /* listen to broadcasts always and to treat */
- /* IFF bits independantly */
- struct rc32434_local *lp = (struct rc32434_local *)dev->priv;
- unsigned long flags;
- u32 recognise = ETHARC_ab_m; /* always accept broadcasts */
-
- if (dev->flags & IFF_PROMISC) /* set promiscuous mode */
- recognise |= ETHARC_pro_m;
-
- if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 15))
- recognise |= ETHARC_am_m; /* all multicast & bcast */
- else if (dev->mc_count > 0) {
- DBG(2, __FUNCTION__ ": mc_count %d\n", dev->mc_count);
- recognise |= ETHARC_am_m; /* for the time being */
- }
-
- spin_lock_irqsave(&lp->lock, flags);
- __raw_writel(recognise, &lp->eth_regs->etharc);
- spin_unlock_irqrestore(&lp->lock, flags);
-}
-
-
-static void rc32434_tx_timeout(struct net_device *dev)
-{
- struct rc32434_local *lp = (struct rc32434_local *)dev->priv;
- unsigned long flags;
-
- spin_lock_irqsave(&lp->lock, flags);
- rc32434_restart(dev);
- spin_unlock_irqrestore(&lp->lock, flags);
-
-}
-
-
-/*
- * Initialize the RC32434 ethernet controller.
- */
-static int rc32434_init(struct net_device *dev)
-{
- struct rc32434_local *lp = (struct rc32434_local *)dev->priv;
- int i, j;
-
- /* Disable DMA */
- rc32434_abort_tx(dev);
- rc32434_abort_rx(dev);
-
- /* reset ethernet logic */
- __raw_writel(0, &lp->eth_regs->ethintfc);
- while((__raw_readl(&lp->eth_regs->ethintfc) & ETHINTFC_rip_m))
- dev->trans_start = jiffies;
-
- /* Enable Ethernet Interface */
- __raw_writel(ETHINTFC_en_m, &lp->eth_regs->ethintfc);
-
- tasklet_disable(lp->tx_tasklet);
-
- /* Initialize the transmit Descriptors */
- for (i = 0; i < RC32434_NUM_TDS; i++) {
- lp->td_ring[i].control = DMAD_iof_m;
- lp->td_ring[i].devcs = ETHTX_fd_m | ETHTX_ld_m;
- lp->td_ring[i].ca = 0;
- lp->td_ring[i].link = 0;
- if (lp->tx_skb[i] != NULL) {
- dev_kfree_skb_any(lp->tx_skb[i]);
- lp->tx_skb[i] = NULL;
- }
- }
- lp->tx_next_done = lp->tx_chain_head = lp->tx_chain_tail = lp->tx_full = lp->tx_count = 0;
- lp-> tx_chain_status = empty;
-
- /*
- * Initialize the receive descriptors so that they
- * become a circular linked list, ie. let the last
- * descriptor point to the first again.
- */
- for (i=0; i<RC32434_NUM_RDS; i++) {
- struct sk_buff *skb = lp->rx_skb[i];
-
- if (lp->rx_skb[i] == NULL) {
- skb = dev_alloc_skb(RC32434_RBSIZE + 2);
- if (skb == NULL) {
- ERR("No memory in the system\n");
- for (j = 0; j < RC32434_NUM_RDS; j ++)
- if (lp->rx_skb[j] != NULL)
- dev_kfree_skb_any(lp->rx_skb[j]);
-
- return 1;
- }
- else {
- skb->dev = dev;
- skb_reserve(skb, 2);
- lp->rx_skb[i] = skb;
- lp->rd_ring[i].ca = CPHYSADDR(skb->data);
-
- }
- }
- lp->rd_ring[i].control = DMAD_iod_m | DMA_COUNT(RC32434_RBSIZE);
- lp->rd_ring[i].devcs = 0;
- lp->rd_ring[i].ca = CPHYSADDR(skb->data);
- lp->rd_ring[i].link = CPHYSADDR(&lp->rd_ring[i+1]);
-
- }
- /* loop back */
- lp->rd_ring[RC32434_NUM_RDS-1].link = CPHYSADDR(&lp->rd_ring[0]);
- lp->rx_next_done = 0;
-
- lp->rd_ring[RC32434_NUM_RDS-1].control |= DMAD_cod_m;
- lp->rx_chain_head = 0;
- lp->rx_chain_tail = 0;
- lp->rx_chain_status = empty;
-
- __raw_writel(0, &lp->rx_dma_regs->dmas);
- /* Start Rx DMA */
- rc32434_start_rx(lp, &lp->rd_ring[0]);
-
- /* Enable F E bit in Tx DMA */
- __raw_writel(__raw_readl(&lp->tx_dma_regs->dmasm) & ~(DMASM_f_m | DMASM_e_m), &lp->tx_dma_regs->dmasm);
- /* Enable D H E bit in Rx DMA */
- __raw_writel(__raw_readl(&lp->rx_dma_regs->dmasm) & ~(DMASM_d_m | DMASM_h_m | DMASM_e_m), &lp->rx_dma_regs->dmasm);
-
- /* Accept only packets destined for this Ethernet device address */
- __raw_writel(ETHARC_ab_m, &lp->eth_regs->etharc);
-
- /* Set all Ether station address registers to their initial values */
- __raw_writel(STATION_ADDRESS_LOW(dev), &lp->eth_regs->ethsal0);
- __raw_writel(STATION_ADDRESS_HIGH(dev), &lp->eth_regs->ethsah0);
-
- __raw_writel(STATION_ADDRESS_LOW(dev), &lp->eth_regs->ethsal1);
- __raw_writel(STATION_ADDRESS_HIGH(dev), &lp->eth_regs->ethsah1);
-
- __raw_writel(STATION_ADDRESS_LOW(dev), &lp->eth_regs->ethsal2);
- __raw_writel(STATION_ADDRESS_HIGH(dev), &lp->eth_regs->ethsah2);
-
- __raw_writel(STATION_ADDRESS_LOW(dev), &lp->eth_regs->ethsal3);
- __raw_writel(STATION_ADDRESS_HIGH(dev), &lp->eth_regs->ethsah3);
-
-
- /* Frame Length Checking, Pad Enable, CRC Enable, Full Duplex set */
- __raw_writel(ETHMAC2_pe_m | ETHMAC2_cen_m | ETHMAC2_fd_m, &lp->eth_regs->ethmac2);
- //ETHMAC2_flc_m ETHMAC2_fd_m lp->duplex_mode
-
- /* Back to back inter-packet-gap */
- __raw_writel(0x15, &lp->eth_regs->ethipgt);
- /* Non - Back to back inter-packet-gap */
- __raw_writel(0x12, &lp->eth_regs->ethipgr);
-
- /* Management Clock Prescaler Divisor */
- /* Clock independent setting */
- __raw_writel(((idt_cpu_freq)/MII_CLOCK+1) & ~1,
- &lp->eth_regs->ethmcp);
-
- /* don't transmit until fifo contains 48b */
- __raw_writel(48, &lp->eth_regs->ethfifott);
-
- __raw_writel(ETHMAC1_re_m, &lp->eth_regs->ethmac1);
-
- napi_enable(&lp->napi);
- tasklet_enable(lp->tx_tasklet);
-
- netif_start_queue(dev);
-
- return 0;
-}
-
-static struct platform_driver korina_driver = {
- .driver.name = "korina",
- .probe = rc32434_probe,
- .remove = rc32434_remove,
-};
-
-static int __init rc32434_init_module(void)
-{
- return platform_driver_register(&korina_driver);
-}
-
-static void rc32434_cleanup_module(void)
-{
- return platform_driver_unregister(&korina_driver);
-}
-
-module_init(rc32434_init_module);
-module_exit(rc32434_cleanup_module);
+++ /dev/null
-/**************************************************************************
- *
- * BRIEF MODULE DESCRIPTION
- * Definitions for IDT RC32434 on-chip ethernet controller.
- *
- * Copyright 2004 IDT Inc. (rischelp@idt.com)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- **************************************************************************
- * May 2004 rkt, neb
- *
- * Initial Release
- *
- * Aug 2004
- *
- * Added NAPI
- *
- **************************************************************************
- */
-
-
-#include <asm/rc32434/rc32434.h>
-#include <asm/rc32434/dma_v.h>
-#include <asm/rc32434/eth_v.h>
-
-#define CONFIG_IDT_USE_NAPI 1
-#define RC32434_DEBUG 2
-//#define RC32434_PROC_DEBUG
-#undef RC32434_DEBUG
-
-#ifdef RC32434_DEBUG
-
-/* use 0 for production, 1 for verification, >2 for debug */
-static int rc32434_debug = RC32434_DEBUG;
-#define ASSERT(expr) \
- if(!(expr)) { \
- printk( "Assertion failed! %s,%s,%s,line=%d\n", \
- #expr,__FILE__,__FUNCTION__,__LINE__); }
-#define DBG(lvl, format, arg...) if (rc32434_debug > lvl) printk(KERN_INFO "%s: " format, dev->name , ## arg)
-#else
-#define ASSERT(expr) do {} while (0)
-#define DBG(lvl, format, arg...) do {} while (0)
-#endif
-
-#define INFO(format, arg...) printk(KERN_INFO "%s: " format, dev->name , ## arg)
-#define ERR(format, arg...) printk(KERN_ERR "%s: " format, dev->name , ## arg)
-#define WARN(format, arg...) printk(KERN_WARNING "%s: " format, dev->name , ## arg)
-
-/* the following must be powers of two */
-#ifdef CONFIG_IDT_USE_NAPI
-#define RC32434_NUM_RDS 64 /* number of receive descriptors */
-#define RC32434_NUM_TDS 64 /* number of transmit descriptors */
-#else
-#define RC32434_NUM_RDS 128 /* number of receive descriptors */
-#define RC32434_NUM_TDS 128 /* number of transmit descriptors */
-#endif
-
-#define RC32434_RBSIZE 1536 /* size of one resource buffer = Ether MTU */
-#define RC32434_RDS_MASK (RC32434_NUM_RDS-1)
-#define RC32434_TDS_MASK (RC32434_NUM_TDS-1)
-#define RD_RING_SIZE (RC32434_NUM_RDS * sizeof(struct DMAD_s))
-#define TD_RING_SIZE (RC32434_NUM_TDS * sizeof(struct DMAD_s))
-
-#define RC32434_TX_TIMEOUT HZ * 100
-
-#define rc32434_eth0_regs ((ETH_t)(ETH0_VirtualAddress))
-#define rc32434_eth1_regs ((ETH_t)(ETH1_VirtualAddress))
-
-enum status { filled, empty};
-#define IS_DMA_FINISHED(X) (((X) & (DMAD_f_m)) != 0)
-#define IS_DMA_DONE(X) (((X) & (DMAD_d_m)) != 0)
-
-
-/* Information that need to be kept for each board. */
-struct rc32434_local {
- ETH_t eth_regs;
- DMA_Chan_t rx_dma_regs;
- DMA_Chan_t tx_dma_regs;
- volatile DMAD_t td_ring; /* transmit descriptor ring */
- volatile DMAD_t rd_ring; /* receive descriptor ring */
-
- struct sk_buff* tx_skb[RC32434_NUM_TDS]; /* skbuffs for pkt to trans */
- struct sk_buff* rx_skb[RC32434_NUM_RDS]; /* skbuffs for pkt to trans */
-
- struct tasklet_struct * tx_tasklet;
-
- int rx_next_done;
- int rx_chain_head;
- int rx_chain_tail;
- enum status rx_chain_status;
-
- int tx_next_done;
- int tx_chain_head;
- int tx_chain_tail;
- enum status tx_chain_status;
- int tx_count;
- int tx_full;
-
- struct timer_list mii_phy_timer;
- unsigned long duplex_mode;
-
- int rx_irq;
- int tx_irq;
- int ovr_irq;
- int und_irq;
-
- struct net_device_stats stats;
- spinlock_t lock;
-
- /* debug /proc entry */
- struct proc_dir_entry *ps;
- int dma_halt_cnt; int dma_run_cnt;
- struct napi_struct napi;
- struct net_device *dev;
-};
-
-extern unsigned int idt_cpu_freq;
-
-/* Index to functions, as function prototypes. */
-static int rc32434_open(struct net_device *dev);
-static int rc32434_send_packet(struct sk_buff *skb, struct net_device *dev);
-static void rc32434_mii_handler(unsigned long data);
-static irqreturn_t rc32434_und_interrupt(int irq, void *dev_id);
-static irqreturn_t rc32434_rx_dma_interrupt(int irq, void *dev_id);
-static irqreturn_t rc32434_tx_dma_interrupt(int irq, void *dev_id);
-#ifdef RC32434_REVISION
-static irqreturn_t rc32434_ovr_interrupt(int irq, void *dev_id);
-#endif
-static int rc32434_close(struct net_device *dev);
-static struct net_device_stats *rc32434_get_stats(struct net_device *dev);
-static void rc32434_multicast_list(struct net_device *dev);
-static int rc32434_init(struct net_device *dev);
-static void rc32434_tx_timeout(struct net_device *dev);
-
-static void rc32434_tx_tasklet(unsigned long tx_data_dev);
-static int rc32434_poll(struct napi_struct *napi, int budget);
-static void rc32434_cleanup_module(void);
-
-
-static inline void rc32434_abort_dma(struct net_device *dev, DMA_Chan_t ch)
-{
- if (__raw_readl(&ch->dmac) & DMAC_run_m) {
- __raw_writel(0x10, &ch->dmac);
-
- while (!(__raw_readl(&ch->dmas) & DMAS_h_m))
- dev->trans_start = jiffies;
-
- __raw_writel(0, &ch->dmas);
- }
-
- __raw_writel(0, &ch->dmadptr);
- __raw_writel(0, &ch->dmandptr);
-}
+++ /dev/null
-/*
- * RC32434_WDT 0.01: IDT Interprise 79RC32434 watchdog driver
- * Copyright (c) Ondrej Zajicek <santiago@crfreenet.org>, 2006
- *
- * based on
- *
- * SoftDog 0.05: A Software Watchdog Device
- *
- * (c) Copyright 1996 Alan Cox <alan@redhat.com>, All Rights Reserved.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- */
-
-#include <linux/module.h>
-#include <linux/types.h>
-#include <linux/kernel.h>
-#include <linux/fs.h>
-#include <linux/mm.h>
-#include <linux/miscdevice.h>
-#include <linux/watchdog.h>
-#include <linux/reboot.h>
-#include <linux/smp_lock.h>
-#include <linux/init.h>
-#include <asm/bootinfo.h>
-#include <asm/time.h>
-#include <asm/uaccess.h>
-#include <asm/rc32434/integ.h>
-
-#define DEFAULT_TIMEOUT 15 /* (secs) Default is 15 seconds */
-#define MAX_TIMEOUT 20
-/*
- * (secs) Max is 20 seconds
- * (max frequency of counter is ~200 MHz, counter is 32-bit unsigned int)
- */
-
-#define NAME "rc32434_wdt"
-#define VERSION "0.1"
-
-static INTEG_t rc_wdt = (INTEG_t) INTEG_VirtualAddress;
-
-static int expect_close = 0;
-static int access = 0;
-static int timeout = 0;
-
-static int nowayout = WATCHDOG_NOWAYOUT;
-module_param(nowayout, int, 0);
-MODULE_PARM_DESC(nowayout, "Watchdog cannot be stopped once started (default=" __MODULE_STRING(WATCHDOG_NOWAYOUT) ")");
-MODULE_LICENSE("GPL");
-
-
-static inline void start_wdt(void)
-{
- rc_wdt -> wtcount = 0;
- rc_wdt -> errcs |= ERRCS_wre_m;
- rc_wdt -> wtc |= WTC_en_m;
-}
-
-static inline void stop_wdt(void)
-{
- rc_wdt -> wtc &= ~WTC_en_m;
- rc_wdt -> errcs &= ~ERRCS_wre_m;
-}
-
-static inline void set_wdt(int new_timeout)
-{
- u32 cmp = new_timeout * mips_hpt_frequency;
- u32 state;
-
- timeout = new_timeout;
- /*
- * store and disable WTC
- */
- state = rc_wdt -> wtc & WTC_en_m;
- rc_wdt -> wtc &= ~WTC_en_m;
-
- rc_wdt -> wtcount = 0;
- rc_wdt -> wtcompare = cmp;
-
- /*
- * restore WTC
- */
- rc_wdt -> wtc |= state;
-}
-
-static inline void update_wdt(void)
-{
- rc_wdt -> wtcount = 0;
-}
-
-/*
- * Allow only one person to hold it open
- */
-
-static int wdt_open(struct inode *inode, struct file *file)
-{
- if (access)
- return -EBUSY;
- if (nowayout) {
- __module_get(THIS_MODULE);
- }
- /*
- * Activate timer
- */
- start_wdt();
- printk(KERN_INFO NAME ": enabling watchdog timer\n");
- access = 1;
- return 0;
-}
-
-static int wdt_release(struct inode *inode, struct file *file)
-{
- /*
- * Shut off the timer.
- * Lock it in if it's a module and we set nowayout
- */
- if (expect_close && nowayout == 0) {
- stop_wdt ();
- printk(KERN_INFO NAME ": disabling watchdog timer\n");
- module_put(THIS_MODULE);
- } else {
- printk (KERN_CRIT NAME ": device closed unexpectedly. WDT will not stop!\n");
- }
- access = 0;
- return 0;
-}
-
-static ssize_t wdt_write(struct file *file, const char *data, size_t len, loff_t *ppos)
-{
- /*
- * Refresh the timer.
- */
- if (len) {
- if (!nowayout) {
- size_t i;
-
- /* In case it was set long ago */
- expect_close = 0;
-
- for (i = 0; i != len; i++) {
- char c;
- if (get_user(c, data + i))
- return -EFAULT;
- if (c == 'V')
- expect_close = 1;
- }
- }
- update_wdt ();
- return len;
- }
- return 0;
-}
-
-static int wdt_ioctl(struct inode *inode, struct file *file,
- unsigned int cmd, unsigned long arg)
-{
- int new_timeout;
- static struct watchdog_info ident = {
- .options = WDIOF_SETTIMEOUT |
- WDIOF_KEEPALIVEPING |
- WDIOF_MAGICCLOSE,
- .firmware_version = 0,
- .identity = "RC32434_WDT Watchdog",
- };
- switch (cmd) {
- default:
- return -ENOTTY;
- case WDIOC_GETSUPPORT:
- if(copy_to_user((struct watchdog_info *)arg, &ident, sizeof(ident)))
- return -EFAULT;
- return 0;
- case WDIOC_GETSTATUS:
- case WDIOC_GETBOOTSTATUS:
- return put_user(0,(int *)arg);
- case WDIOC_KEEPALIVE:
- update_wdt();
- return 0;
- case WDIOC_SETTIMEOUT:
- if (get_user(new_timeout, (int *)arg))
- return -EFAULT;
- if (new_timeout < 1)
- return -EINVAL;
- if (new_timeout > MAX_TIMEOUT)
- return -EINVAL;
- set_wdt(new_timeout);
- /* Fall */
- case WDIOC_GETTIMEOUT:
- return put_user(timeout, (int *)arg);
- }
-}
-
-static struct file_operations wdt_fops = {
- owner: THIS_MODULE,
- llseek: no_llseek,
- write: wdt_write,
- ioctl: wdt_ioctl,
- open: wdt_open,
- release: wdt_release,
-};
-
-static struct miscdevice wdt_miscdev = {
- minor: WATCHDOG_MINOR,
- name: "watchdog",
- fops: &wdt_fops,
-};
-
-static char banner[] __initdata = KERN_INFO NAME ": Watchdog Timer version " VERSION ", timer margin: %d sec\n";
-
-static int __init watchdog_init(void)
-{
- int ret;
-
- /*
- * There should be check for RC32434 SoC
- */
- if (mips_machgroup != MACH_GROUP_MIKROTIK) return -1;
-
- ret = misc_register(&wdt_miscdev);
-
- if (ret)
- return ret;
-
- stop_wdt();
- set_wdt(DEFAULT_TIMEOUT);
-
- printk(banner, timeout);
-
- return 0;
-}
-
-static void __exit watchdog_exit(void)
-{
- misc_deregister(&wdt_miscdev);
-}
-
-module_init(watchdog_init);
-module_exit(watchdog_exit);
+++ /dev/null
-#ifndef __IDT_DDR_H__
-#define __IDT_DDR_H__
-
-/*******************************************************************************
- *
- * Copyright 2002 Integrated Device Technology, Inc.
- * All rights reserved.
- *
- * DDR register definition.
- *
- *
- * Author : ryan.holmQVist@idt.com
- * Date : 20011005
- * Update :
- * $Log: ddr.h,v $
- * Revision 1.2 2002/06/06 18:34:03 astichte
- * Added XXX_PhysicalAddress and XXX_VirtualAddress
- *
- * Revision 1.1 2002/05/29 17:33:21 sysarch
- * jba File moved from vcode/include/idt/acacia
- *
- *
- ******************************************************************************/
-
-enum
-{
- DDR0_PhysicalAddress = 0x18018000,
- DDR_PhysicalAddress = DDR0_PhysicalAddress, // Default
-
- DDR0_VirtualAddress = 0xb8018000,
- DDR_VirtualAddress = DDR0_VirtualAddress, // Default
-} ;
-
-typedef struct DDR_s
-{
- u32 ddrbase ;
- u32 ddrmask ;
- u32 res1;
- u32 res2;
- u32 ddrc ;
- u32 ddrabase ;
- u32 ddramask ;
- u32 ddramap ;
- u32 ddrcust;
- u32 ddrrdc;
- u32 ddrspare;
-} volatile *DDR_t ;
-
-enum
-{
- DDR0BASE_baseaddr_b = 16,
- DDR0BASE_baseaddr_m = 0xffff0000,
-
- DDR0MASK_mask_b = 16,
- DDR0MASK_mask_m = 0xffff0000,
-
- DDR1BASE_baseaddr_b = 16,
- DDR1BASE_baseaddr_m = 0xffff0000,
-
- DDR1MASK_mask_b = 16,
- DDR1MASK_mask_m = 0xffff0000,
-
- DDRC_ata_b = 5,
- DDRC_ata_m = 0x000000E0,
- DDRC_dbw_b = 8,
- DDRC_dbw_m = 0x00000100,
- DDRC_wr_b = 9,
- DDRC_wr_m = 0x00000600,
- DDRC_ps_b = 11,
- DDRC_ps_m = 0x00001800,
- DDRC_dtype_b = 13,
- DDRC_dtype_m = 0x0000e000,
- DDRC_rfc_b = 16,
- DDRC_rfc_m = 0x000f0000,
- DDRC_rp_b = 20,
- DDRC_rp_m = 0x00300000,
- DDRC_ap_b = 22,
- DDRC_ap_m = 0x00400000,
- DDRC_rcd_b = 23,
- DDRC_rcd_m = 0x01800000,
- DDRC_cl_b = 25,
- DDRC_cl_m = 0x06000000,
- DDRC_dbm_b = 27,
- DDRC_dbm_m = 0x08000000,
- DDRC_sds_b = 28,
- DDRC_sds_m = 0x10000000,
- DDRC_atp_b = 29,
- DDRC_atp_m = 0x60000000,
- DDRC_re_b = 31,
- DDRC_re_m = 0x80000000,
-
- DDRRDC_ces_b = 0,
- DDRRDC_ces_m = 0x00000001,
- DDRRDC_ace_b = 1,
- DDRRDC_ace_m = 0x00000002,
-
- DDRABASE_baseaddr_b = 16,
- DDRABASE_baseaddr_m = 0xffff0000,
-
- DDRAMASK_mask_b = 16,
- DDRAMASK_mask_m = 0xffff0000,
-
- DDRAMAP_map_b = 16,
- DDRAMAP_map_m = 0xffff0000,
-
- DDRCUST_cs_b = 0,
- DDRCUST_cs_m = 0x00000003,
- DDRCUST_we_b = 2,
- DDRCUST_we_m = 0x00000004,
- DDRCUST_ras_b = 3,
- DDRCUST_ras_m = 0x00000008,
- DDRCUST_cas_b = 4,
- DDRCUST_cas_m = 0x00000010,
- DDRCUST_cke_b = 5,
- DDRCUST_cke_m = 0x00000020,
- DDRCUST_ba_b = 6,
- DDRCUST_ba_m = 0x000000c0,
-
- RCOUNT_rcount_b = 0,
- RCOUNT_rcount_m = 0x0000ffff,
-
- RCOMPARE_rcompare_b = 0,
- RCOMPARE_rcompare_m = 0x0000ffff,
-
- RTC_ce_b = 0,
- RTC_ce_m = 0x00000001,
- RTC_to_b = 1,
- RTC_to_m = 0x00000002,
- RTC_rqe_b = 2,
- RTC_rqe_m = 0x00000004,
-
- DDRDQSC_dm_b = 0,
- DDRDQSC_dm_m = 0x00000003,
- DDRDQSC_dqsbs_b = 2,
- DDRDQSC_dqsbs_m = 0x000000fc,
- DDRDQSC_db_b = 8,
- DDRDQSC_db_m = 0x00000100,
- DDRDQSC_dbsp_b = 9,
- DDRDQSC_dbsp_m = 0x01fffe00,
- DDRDQSC_bdp_b = 25,
- DDRDQSC_bdp_m = 0x7e000000,
-
- DDRDLLC_eao_b = 0,
- DDRDLLC_eao_m = 0x00000001,
- DDRDLLC_eo_b = 1,
- DDRDLLC_eo_m = 0x0000003e,
- DDRDLLC_fs_b = 6,
- DDRDLLC_fs_m = 0x000000c0,
- DDRDLLC_as_b = 8,
- DDRDLLC_as_m = 0x00000700,
- DDRDLLC_sp_b = 11,
- DDRDLLC_sp_m = 0x001ff800,
-
- DDRDLLFC_men_b = 0,
- DDRDLLFC_men_m = 0x00000001,
- DDRDLLFC_aen_b = 1,
- DDRDLLFC_aen_m = 0x00000002,
- DDRDLLFC_ff_b = 2,
- DDRDLLFC_ff_m = 0x00000004,
-
- DDRDLLTA_addr_b = 2,
- DDRDLLTA_addr_m = 0xfffffffc,
-
- DDRDLLED_dbe_b = 0,
- DDRDLLED_dbe_m = 0x00000001,
- DDRDLLED_dte_b = 1,
- DDRDLLED_dte_m = 0x00000002,
-
-
-} ;
-
-#endif // __IDT_DDR_H__
+++ /dev/null
-#ifndef __IDT_DMA_H__
-#define __IDT_DMA_H__
-
-/*******************************************************************************
- *
- * Copyright 2002 Integrated Device Technology, Inc.
- * All rights reserved.
- *
- * DMA register definition.
- *
- *
- * Author : ryan.holmQVist@idt.com
- * Date : 20011005
- * Update :
- * $Log: dma.h,v $
- * Revision 1.3 2002/06/06 18:34:03 astichte
- * Added XXX_PhysicalAddress and XXX_VirtualAddress
- *
- * Revision 1.2 2002/06/05 18:30:46 astichte
- * Removed IDTField
- *
- * Revision 1.1 2002/05/29 17:33:21 sysarch
- * jba File moved from vcode/include/idt/acacia
- *
- *
- ******************************************************************************/
-
-enum
-{
- DMA0_PhysicalAddress = 0x18040000,
- DMA_PhysicalAddress = DMA0_PhysicalAddress, // Default
-
- DMA0_VirtualAddress = 0xb8040000,
- DMA_VirtualAddress = DMA0_VirtualAddress, // Default
-} ;
-
-/*
- * DMA descriptor (in physical memory).
- */
-
-typedef struct DMAD_s
-{
- u32 control ; // Control. use DMAD_*
- u32 ca ; // Current Address.
- u32 devcs ; // Device control and status.
- u32 link ; // Next descriptor in chain.
-} volatile *DMAD_t ;
-
-enum
-{
- DMAD_size = sizeof (struct DMAD_s),
- DMAD_count_b = 0, // in DMAD_t -> control
- DMAD_count_m = 0x0003ffff, // in DMAD_t -> control
- DMAD_ds_b = 20, // in DMAD_t -> control
- DMAD_ds_m = 0x00300000, // in DMAD_t -> control
- DMAD_ds_ethRcv_v = 0,
- DMAD_ds_ethXmt_v = 0,
- DMAD_ds_memToFifo_v = 0,
- DMAD_ds_fifoToMem_v = 0,
- DMAD_ds_pciToMem_v = 0,
- DMAD_ds_memToPci_v = 0,
-
- DMAD_devcmd_b = 22, // in DMAD_t -> control
- DMAD_devcmd_m = 0x01c00000, // in DMAD_t -> control
- DMAD_devcmd_byte_v = 0, //memory-to-memory
- DMAD_devcmd_halfword_v = 1, //memory-to-memory
- DMAD_devcmd_word_v = 2, //memory-to-memory
- DMAD_devcmd_2words_v = 3, //memory-to-memory
- DMAD_devcmd_4words_v = 4, //memory-to-memory
- DMAD_devcmd_6words_v = 5, //memory-to-memory
- DMAD_devcmd_8words_v = 6, //memory-to-memory
- DMAD_devcmd_16words_v = 7, //memory-to-memory
- DMAD_cof_b = 25, // chain on finished
- DMAD_cof_m = 0x02000000, //
- DMAD_cod_b = 26, // chain on done
- DMAD_cod_m = 0x04000000, //
- DMAD_iof_b = 27, // interrupt on finished
- DMAD_iof_m = 0x08000000, //
- DMAD_iod_b = 28, // interrupt on done
- DMAD_iod_m = 0x10000000, //
- DMAD_t_b = 29, // terminated
- DMAD_t_m = 0x20000000, //
- DMAD_d_b = 30, // done
- DMAD_d_m = 0x40000000, //
- DMAD_f_b = 31, // finished
- DMAD_f_m = 0x80000000, //
-} ;
-
-/*
- * DMA register (within Internal Register Map).
- */
-
-struct DMA_Chan_s
-{
- u32 dmac ; // Control.
- u32 dmas ; // Status.
- u32 dmasm ; // Mask.
- u32 dmadptr ; // Descriptor pointer.
- u32 dmandptr ; // Next descriptor pointer.
-};
-
-typedef struct DMA_Chan_s volatile *DMA_Chan_t ;
-
-//DMA_Channels use DMACH_count instead
-
-enum
-{
- DMAC_run_b = 0, //
- DMAC_run_m = 0x00000001, //
- DMAC_dm_b = 1, // done mask
- DMAC_dm_m = 0x00000002, //
- DMAC_mode_b = 2, //
- DMAC_mode_m = 0x0000000c, //
- DMAC_mode_auto_v = 0,
- DMAC_mode_burst_v = 1,
- DMAC_mode_transfer_v = 2, //usually used
- DMAC_mode_reserved_v = 3,
- DMAC_a_b = 4, //
- DMAC_a_m = 0x00000010, //
-
- DMAS_f_b = 0, // finished (sticky)
- DMAS_f_m = 0x00000001, //
- DMAS_d_b = 1, // done (sticky)
- DMAS_d_m = 0x00000002, //
- DMAS_c_b = 2, // chain (sticky)
- DMAS_c_m = 0x00000004, //
- DMAS_e_b = 3, // error (sticky)
- DMAS_e_m = 0x00000008, //
- DMAS_h_b = 4, // halt (sticky)
- DMAS_h_m = 0x00000010, //
-
- DMASM_f_b = 0, // finished (1=mask)
- DMASM_f_m = 0x00000001, //
- DMASM_d_b = 1, // done (1=mask)
- DMASM_d_m = 0x00000002, //
- DMASM_c_b = 2, // chain (1=mask)
- DMASM_c_m = 0x00000004, //
- DMASM_e_b = 3, // error (1=mask)
- DMASM_e_m = 0x00000008, //
- DMASM_h_b = 4, // halt (1=mask)
- DMASM_h_m = 0x00000010, //
-} ;
-
-/*
- * DMA channel definitions
- */
-
-enum
-{
- DMACH_ethRcv = 0,
- DMACH_ethXmt = 1,
- DMACH_memToFifo = 2,
- DMACH_fifoToMem = 3,
- DMACH_pciToMem = 4,
- DMACH_memToPci = 5,
-
- DMACH_count //must be last
-};
-
-
-typedef struct DMAC_s
-{
- struct DMA_Chan_s ch [DMACH_count] ; //use ch[DMACH_]
-} volatile *DMA_t ;
-
-#endif // __IDT_DMA_H__
-
+++ /dev/null
-#ifndef __IDT_DMA_V_H__
-#define __IDT_DMA_V_H__
-
-/*******************************************************************************
- *
- * Copyright 2002 Integrated Device Technology, Inc.
- * All rights reserved.
- *
- * DMA register definition.
- *
- *
- * Author : ryan.holmQVist@idt.com
- * Date : 20011005
- * Update :
- * $Log: dma.h,v $
- * Revision 1.3 2002/06/06 18:34:03 astichte
- * Added XXX_PhysicalAddress and XXX_VirtualAddress
- *
- * Revision 1.2 2002/06/05 18:30:46 astichte
- * Removed IDTField
- *
- * Revision 1.1 2002/05/29 17:33:21 sysarch
- * jba File moved from vcode/include/idt/acacia
- *
- *
- ******************************************************************************/
-#include <asm/rc32434/dma.h>
-#include <asm/rc32434/rc32434.h>
-#define DMA_CHAN_OFFSET 0x14
-#define IS_DMA_USED(X) (((X) & (DMAD_f_m | DMAD_d_m | DMAD_t_m)) != 0)
-#define DMA_COUNT(count) \
- ((count) & DMAD_count_m)
-
-#define DMA_HALT_TIMEOUT 500
-
-
-static inline int rc32434_halt_dma(DMA_Chan_t ch)
-{
- int timeout=1;
- if (local_readl(&ch->dmac) & DMAC_run_m) {
- local_writel(0, &ch->dmac);
- for (timeout = DMA_HALT_TIMEOUT; timeout > 0; timeout--) {
- if (local_readl(&ch->dmas) & DMAS_h_m) {
- local_writel(0, &ch->dmas);
- break;
- }
- }
- }
-
- return timeout ? 0 : 1;
-}
-
-static inline void rc32434_start_dma(DMA_Chan_t ch, u32 dma_addr)
-{
- local_writel(0, &ch->dmandptr);
- local_writel(dma_addr, &ch->dmadptr);
-}
-
-static inline void rc32434_chain_dma(DMA_Chan_t ch, u32 dma_addr)
-{
- local_writel(dma_addr, &ch->dmandptr);
-}
-
-#endif // __IDT_DMA_V_H__
-
-
-
-
-
-
-
+++ /dev/null
-#ifndef __IDT_ETH_H__
-#define __IDT_ETH_H__
-
-/*******************************************************************************
- *
- * Copyright 2002 Integrated Device Technology, Inc.
- * All rights reserved.
- *
- * Ethernet register definition.
- *
- *
- * Author : Allen.Stichter@idt.com
- * Date : 20020605
- * Update :
- * $Log: eth.h,v $
- * Revision 1.3 2002/06/06 18:34:04 astichte
- * Added XXX_PhysicalAddress and XXX_VirtualAddress
- *
- * Revision 1.2 2002/06/05 18:19:46 astichte
- * Added
- *
- * Revision 1.1 2002/05/29 17:33:22 sysarch
- * jba File moved from vcode/include/idt/acacia
- *
- ******************************************************************************/
-
-enum
-{
- ETH0_PhysicalAddress = 0x18060000,
- ETH_PhysicalAddress = ETH0_PhysicalAddress, // Default
-
- ETH0_VirtualAddress = 0xb8060000,
- ETH_VirtualAddress = ETH0_VirtualAddress, // Default
-} ;
-
-typedef struct
-{
- u32 ethintfc ;
- u32 ethfifott ;
- u32 etharc ;
- u32 ethhash0 ;
- u32 ethhash1 ;
- u32 ethu0 [4] ; // Reserved.
- u32 ethpfs ;
- u32 ethmcp ;
- u32 eth_u1 [10] ; // Reserved.
- u32 ethspare ;
- u32 eth_u2 [42] ; // Reserved.
- u32 ethsal0 ;
- u32 ethsah0 ;
- u32 ethsal1 ;
- u32 ethsah1 ;
- u32 ethsal2 ;
- u32 ethsah2 ;
- u32 ethsal3 ;
- u32 ethsah3 ;
- u32 ethrbc ;
- u32 ethrpc ;
- u32 ethrupc ;
- u32 ethrfc ;
- u32 ethtbc ;
- u32 ethgpf ;
- u32 eth_u9 [50] ; // Reserved.
- u32 ethmac1 ;
- u32 ethmac2 ;
- u32 ethipgt ;
- u32 ethipgr ;
- u32 ethclrt ;
- u32 ethmaxf ;
- u32 eth_u10 ; // Reserved.
- u32 ethmtest ;
- u32 miimcfg ;
- u32 miimcmd ;
- u32 miimaddr ;
- u32 miimwtd ;
- u32 miimrdd ;
- u32 miimind ;
- u32 eth_u11 ; // Reserved.
- u32 eth_u12 ; // Reserved.
- u32 ethcfsa0 ;
- u32 ethcfsa1 ;
- u32 ethcfsa2 ;
-} volatile *ETH_t;
-
-enum
-{
- ETHINTFC_en_b = 0,
- ETHINTFC_en_m = 0x00000001,
- ETHINTFC_its_b = 1,
- ETHINTFC_its_m = 0x00000002,
- ETHINTFC_rip_b = 2,
- ETHINTFC_rip_m = 0x00000004,
- ETHINTFC_jam_b = 3,
- ETHINTFC_jam_m = 0x00000008,
- ETHINTFC_ovr_b = 4,
- ETHINTFC_ovr_m = 0x00000010,
- ETHINTFC_und_b = 5,
- ETHINTFC_und_m = 0x00000020,
- ETHINTFC_iom_b = 6,
- ETHINTFC_iom_m = 0x000000c0,
-
- ETHFIFOTT_tth_b = 0,
- ETHFIFOTT_tth_m = 0x0000007f,
-
- ETHARC_pro_b = 0,
- ETHARC_pro_m = 0x00000001,
- ETHARC_am_b = 1,
- ETHARC_am_m = 0x00000002,
- ETHARC_afm_b = 2,
- ETHARC_afm_m = 0x00000004,
- ETHARC_ab_b = 3,
- ETHARC_ab_m = 0x00000008,
-
- ETHSAL_byte5_b = 0,
- ETHSAL_byte5_m = 0x000000ff,
- ETHSAL_byte4_b = 8,
- ETHSAL_byte4_m = 0x0000ff00,
- ETHSAL_byte3_b = 16,
- ETHSAL_byte3_m = 0x00ff0000,
- ETHSAL_byte2_b = 24,
- ETHSAL_byte2_m = 0xff000000,
-
- ETHSAH_byte1_b = 0,
- ETHSAH_byte1_m = 0x000000ff,
- ETHSAH_byte0_b = 8,
- ETHSAH_byte0_m = 0x0000ff00,
-
- ETHGPF_ptv_b = 0,
- ETHGPF_ptv_m = 0x0000ffff,
-
- ETHPFS_pfd_b = 0,
- ETHPFS_pfd_m = 0x00000001,
-
- ETHCFSA0_cfsa4_b = 0,
- ETHCFSA0_cfsa4_m = 0x000000ff,
- ETHCFSA0_cfsa5_b = 8,
- ETHCFSA0_cfsa5_m = 0x0000ff00,
-
- ETHCFSA1_cfsa2_b = 0,
- ETHCFSA1_cfsa2_m = 0x000000ff,
- ETHCFSA1_cfsa3_b = 8,
- ETHCFSA1_cfsa3_m = 0x0000ff00,
-
- ETHCFSA2_cfsa0_b = 0,
- ETHCFSA2_cfsa0_m = 0x000000ff,
- ETHCFSA2_cfsa1_b = 8,
- ETHCFSA2_cfsa1_m = 0x0000ff00,
-
- ETHMAC1_re_b = 0,
- ETHMAC1_re_m = 0x00000001,
- ETHMAC1_paf_b = 1,
- ETHMAC1_paf_m = 0x00000002,
- ETHMAC1_rfc_b = 2,
- ETHMAC1_rfc_m = 0x00000004,
- ETHMAC1_tfc_b = 3,
- ETHMAC1_tfc_m = 0x00000008,
- ETHMAC1_lb_b = 4,
- ETHMAC1_lb_m = 0x00000010,
- ETHMAC1_mr_b = 31,
- ETHMAC1_mr_m = 0x80000000,
-
- ETHMAC2_fd_b = 0,
- ETHMAC2_fd_m = 0x00000001,
- ETHMAC2_flc_b = 1,
- ETHMAC2_flc_m = 0x00000002,
- ETHMAC2_hfe_b = 2,
- ETHMAC2_hfe_m = 0x00000004,
- ETHMAC2_dc_b = 3,
- ETHMAC2_dc_m = 0x00000008,
- ETHMAC2_cen_b = 4,
- ETHMAC2_cen_m = 0x00000010,
- ETHMAC2_pe_b = 5,
- ETHMAC2_pe_m = 0x00000020,
- ETHMAC2_vpe_b = 6,
- ETHMAC2_vpe_m = 0x00000040,
- ETHMAC2_ape_b = 7,
- ETHMAC2_ape_m = 0x00000080,
- ETHMAC2_ppe_b = 8,
- ETHMAC2_ppe_m = 0x00000100,
- ETHMAC2_lpe_b = 9,
- ETHMAC2_lpe_m = 0x00000200,
- ETHMAC2_nb_b = 12,
- ETHMAC2_nb_m = 0x00001000,
- ETHMAC2_bp_b = 13,
- ETHMAC2_bp_m = 0x00002000,
- ETHMAC2_ed_b = 14,
- ETHMAC2_ed_m = 0x00004000,
-
- ETHIPGT_ipgt_b = 0,
- ETHIPGT_ipgt_m = 0x0000007f,
-
- ETHIPGR_ipgr2_b = 0,
- ETHIPGR_ipgr2_m = 0x0000007f,
- ETHIPGR_ipgr1_b = 8,
- ETHIPGR_ipgr1_m = 0x00007f00,
-
- ETHCLRT_maxret_b = 0,
- ETHCLRT_maxret_m = 0x0000000f,
- ETHCLRT_colwin_b = 8,
- ETHCLRT_colwin_m = 0x00003f00,
-
- ETHMAXF_maxf_b = 0,
- ETHMAXF_maxf_m = 0x0000ffff,
-
- ETHMTEST_tb_b = 2,
- ETHMTEST_tb_m = 0x00000004,
-
- ETHMCP_div_b = 0,
- ETHMCP_div_m = 0x000000ff,
-
- MIIMCFG_rsv_b = 0,
- MIIMCFG_rsv_m = 0x0000000c,
-
- MIIMCMD_rd_b = 0,
- MIIMCMD_rd_m = 0x00000001,
- MIIMCMD_scn_b = 1,
- MIIMCMD_scn_m = 0x00000002,
-
- MIIMADDR_regaddr_b = 0,
- MIIMADDR_regaddr_m = 0x0000001f,
- MIIMADDR_phyaddr_b = 8,
- MIIMADDR_phyaddr_m = 0x00001f00,
-
- MIIMWTD_wdata_b = 0,
- MIIMWTD_wdata_m = 0x0000ffff,
-
- MIIMRDD_rdata_b = 0,
- MIIMRDD_rdata_m = 0x0000ffff,
-
- MIIMIND_bsy_b = 0,
- MIIMIND_bsy_m = 0x00000001,
- MIIMIND_scn_b = 1,
- MIIMIND_scn_m = 0x00000002,
- MIIMIND_nv_b = 2,
- MIIMIND_nv_m = 0x00000004,
-
-} ;
-
-/*
- * Values for the DEVCS field of the Ethernet DMA Rx and Tx descriptors.
- */
-enum
-{
- ETHRX_fd_b = 0,
- ETHRX_fd_m = 0x00000001,
- ETHRX_ld_b = 1,
- ETHRX_ld_m = 0x00000002,
- ETHRX_rok_b = 2,
- ETHRX_rok_m = 0x00000004,
- ETHRX_fm_b = 3,
- ETHRX_fm_m = 0x00000008,
- ETHRX_mp_b = 4,
- ETHRX_mp_m = 0x00000010,
- ETHRX_bp_b = 5,
- ETHRX_bp_m = 0x00000020,
- ETHRX_vlt_b = 6,
- ETHRX_vlt_m = 0x00000040,
- ETHRX_cf_b = 7,
- ETHRX_cf_m = 0x00000080,
- ETHRX_ovr_b = 8,
- ETHRX_ovr_m = 0x00000100,
- ETHRX_crc_b = 9,
- ETHRX_crc_m = 0x00000200,
- ETHRX_cv_b = 10,
- ETHRX_cv_m = 0x00000400,
- ETHRX_db_b = 11,
- ETHRX_db_m = 0x00000800,
- ETHRX_le_b = 12,
- ETHRX_le_m = 0x00001000,
- ETHRX_lor_b = 13,
- ETHRX_lor_m = 0x00002000,
- ETHRX_ces_b = 14,
- ETHRX_ces_m = 0x00004000,
- ETHRX_length_b = 16,
- ETHRX_length_m = 0xffff0000,
-
- ETHTX_fd_b = 0,
- ETHTX_fd_m = 0x00000001,
- ETHTX_ld_b = 1,
- ETHTX_ld_m = 0x00000002,
- ETHTX_oen_b = 2,
- ETHTX_oen_m = 0x00000004,
- ETHTX_pen_b = 3,
- ETHTX_pen_m = 0x00000008,
- ETHTX_cen_b = 4,
- ETHTX_cen_m = 0x00000010,
- ETHTX_hen_b = 5,
- ETHTX_hen_m = 0x00000020,
- ETHTX_tok_b = 6,
- ETHTX_tok_m = 0x00000040,
- ETHTX_mp_b = 7,
- ETHTX_mp_m = 0x00000080,
- ETHTX_bp_b = 8,
- ETHTX_bp_m = 0x00000100,
- ETHTX_und_b = 9,
- ETHTX_und_m = 0x00000200,
- ETHTX_of_b = 10,
- ETHTX_of_m = 0x00000400,
- ETHTX_ed_b = 11,
- ETHTX_ed_m = 0x00000800,
- ETHTX_ec_b = 12,
- ETHTX_ec_m = 0x00001000,
- ETHTX_lc_b = 13,
- ETHTX_lc_m = 0x00002000,
- ETHTX_td_b = 14,
- ETHTX_td_m = 0x00004000,
- ETHTX_crc_b = 15,
- ETHTX_crc_m = 0x00008000,
- ETHTX_le_b = 16,
- ETHTX_le_m = 0x00010000,
- ETHTX_cc_b = 17,
- ETHTX_cc_m = 0x001E0000,
-} ;
-
-#endif // __IDT_ETH_H__
-
-
-
-
+++ /dev/null
-#ifndef __IDT_ETH_V_H__
-#define __IDT_ETH_V_H__
-
-/*******************************************************************************
- *
- * Copyright 2002 Integrated Device Technology, Inc.
- * All rights reserved.
- *
- * Ethernet register definition.
- *
- *
- * Author : Allen.Stichter@idt.com
- * Date : 20020605
- * Update :
- * $Log: eth.h,v $
- * Revision 1.3 2002/06/06 18:34:04 astichte
- * Added XXX_PhysicalAddress and XXX_VirtualAddress
- *
- * Revision 1.2 2002/06/05 18:19:46 astichte
- * Added
- *
- * Revision 1.1 2002/05/29 17:33:22 sysarch
- * jba File moved from vcode/include/idt/acacia
- *
- ******************************************************************************/
-
-#include <asm/rc32434/eth.h>
-
-#define IS_TX_TOK(X) (((X) & (1<<ETHTX_tok_b)) >> ETHTX_tok_b ) /* Transmit Okay */
-#define IS_TX_MP(X) (((X) & (1<<ETHTX_mp_b)) >> ETHTX_mp_b ) /* Multicast */
-#define IS_TX_BP(X) (((X) & (1<<ETHTX_bp_b)) >> ETHTX_bp_b ) /* Broadcast */
-#define IS_TX_UND_ERR(X) (((X) & (1<<ETHTX_und_b)) >> ETHTX_und_b ) /* Transmit FIFO Underflow */
-#define IS_TX_OF_ERR(X) (((X) & (1<<ETHTX_of_b)) >> ETHTX_of_b ) /* Oversized frame */
-#define IS_TX_ED_ERR(X) (((X) & (1<<ETHTX_ed_b)) >> ETHTX_ed_b ) /* Excessive deferral */
-#define IS_TX_EC_ERR(X) (((X) & (1<<ETHTX_ec_b)) >> ETHTX_ec_b) /* Excessive collisions */
-#define IS_TX_LC_ERR(X) (((X) & (1<<ETHTX_lc_b)) >> ETHTX_lc_b ) /* Late Collision */
-#define IS_TX_TD_ERR(X) (((X) & (1<<ETHTX_td_b)) >> ETHTX_td_b ) /* Transmit deferred*/
-#define IS_TX_CRC_ERR(X) (((X) & (1<<ETHTX_crc_b)) >> ETHTX_crc_b ) /* CRC Error */
-#define IS_TX_LE_ERR(X) (((X) & (1<<ETHTX_le_b)) >> ETHTX_le_b ) /* Length Error */
-
-#define TX_COLLISION_COUNT(X) (((X) & ETHTX_cc_m)>>ETHTX_cc_b) /* Collision Count */
-
-#define IS_RCV_ROK(X) (((X) & (1<<ETHRX_rok_b)) >> ETHRX_rok_b) /* Receive Okay */
-#define IS_RCV_FM(X) (((X) & (1<<ETHRX_fm_b)) >> ETHRX_fm_b) /* Is Filter Match */
-#define IS_RCV_MP(X) (((X) & (1<<ETHRX_mp_b)) >> ETHRX_mp_b) /* Is it MP */
-#define IS_RCV_BP(X) (((X) & (1<<ETHRX_bp_b)) >> ETHRX_bp_b) /* Is it BP */
-#define IS_RCV_VLT(X) (((X) & (1<<ETHRX_vlt_b)) >> ETHRX_vlt_b) /* VLAN Tag Detect */
-#define IS_RCV_CF(X) (((X) & (1<<ETHRX_cf_b)) >> ETHRX_cf_b) /* Control Frame */
-#define IS_RCV_OVR_ERR(X) (((X) & (1<<ETHRX_ovr_b)) >> ETHRX_ovr_b) /* Receive Overflow */
-#define IS_RCV_CRC_ERR(X) (((X) & (1<<ETHRX_crc_b)) >> ETHRX_crc_b) /* CRC Error */
-#define IS_RCV_CV_ERR(X) (((X) & (1<<ETHRX_cv_b)) >> ETHRX_cv_b) /* Code Violation */
-#define IS_RCV_DB_ERR(X) (((X) & (1<<ETHRX_db_b)) >> ETHRX_db_b) /* Dribble Bits */
-#define IS_RCV_LE_ERR(X) (((X) & (1<<ETHRX_le_b)) >> ETHRX_le_b) /* Length error */
-#define IS_RCV_LOR_ERR(X) (((X) & (1<<ETHRX_lor_b)) >> ETHRX_lor_b) /* Length Out of Range */
-#define IS_RCV_CES_ERR(X) (((X) & (1<<ETHRX_ces_b)) >> ETHRX_ces_b) /* Preamble error */
-#define RCVPKT_LENGTH(X) (((X) & ETHRX_length_m) >> ETHRX_length_b) /* Length of the received packet */
-#endif // __IDT_ETH_V_H__
-
-
-
-
-
+++ /dev/null
-/*
- * Copyright 2002 Integrated Device Technology, Inc.
- * All rights reserved.
- *
- * GPIO register definition.
- *
- * Author : ryan.holmQVist@idt.com
- * Date : 20011005
- * Copyright (C) 2001, 2002 Ryan Holm <ryan.holmQVist@idt.com>
- * Copyright (C) 2008 Florian Fainelli <florian@openwrt.org>
- */
-
-#ifndef _RC32434_GPIO_H_
-#define _RC32434_GPIO_H_
-
-#include <linux/types.h>
-
-struct rb500_gpio_reg {
- u32 gpiofunc; /* GPIO Function Register
- * gpiofunc[x]==0 bit = gpio
- * func[x]==1 bit = altfunc
- */
- u32 gpiocfg; /* GPIO Configuration Register
- * gpiocfg[x]==0 bit = input
- * gpiocfg[x]==1 bit = output
- */
- u32 gpiod; /* GPIO Data Register
- * gpiod[x] read/write gpio pinX status
- */
- u32 gpioilevel; /* GPIO Interrupt Status Register
- * interrupt level (see gpioistat)
- */
- u32 gpioistat; /* Gpio Interrupt Status Register
- * istat[x] = (gpiod[x] == level[x])
- * cleared in ISR (STICKY bits)
- */
- u32 gpionmien; /* GPIO Non-maskable Interrupt Enable Register */
-};
-
-/* UART GPIO signals */
-#define RC32434_UART0_SOUT (1 << 0)
-#define RC32434_UART0_SIN (1 << 1)
-#define RC32434_UART0_RTS (1 << 2)
-#define RC32434_UART0_CTS (1 << 3)
-
-/* M & P bus GPIO signals */
-#define RC32434_MP_BIT_22 (1 << 4)
-#define RC32434_MP_BIT_23 (1 << 5)
-#define RC32434_MP_BIT_24 (1 << 6)
-#define RC32434_MP_BIT_25 (1 << 7)
-
-/* CPU GPIO signals */
-#define RC32434_CPU_GPIO (1 << 8)
-
-/* Reserved GPIO signals */
-#define RC32434_AF_SPARE_6 (1 << 9)
-#define RC32434_AF_SPARE_4 (1 << 10)
-#define RC32434_AF_SPARE_3 (1 << 11)
-#define RC32434_AF_SPARE_2 (1 << 12)
-
-/* PCI messaging unit */
-#define RC32434_PCI_MSU_GPIO (1 << 13)
-
-extern int rb500_gpio_get_value(unsigned gpio);
-extern void rb500_gpio_set_value(unsigned gpio, int value);
-extern int rb500_gpio_direction_input(unsigned gpio);
-extern int rb500_gpio_direction_output(unsigned gpio, int value);
-extern void rb500_gpio_set_int_level(unsigned gpio, int value);
-extern int rb500_gpio_get_int_level(unsigned gpio);
-extern void rb500_gpio_set_int_status(unsigned gpio, int value);
-extern int rb500_gpio_get_int_status(unsigned gpio);
-extern void rb500_gpio_set_func(unsigned gpio, int value);
-extern int rb500_gpio_get_func(unsigned gpio);
-
-
-/* Wrappers for the arch-neutral GPIO API */
-
-static inline int gpio_request(unsigned gpio, const char *label)
-{
- /* Not yet implemented */
- return 0;
-}
-
-static inline void gpio_free(unsigned gpio)
-{
- /* Not yet implemented */
-}
-
-static inline int gpio_direction_input(unsigned gpio)
-{
- return rb500_gpio_direction_input(gpio);
-}
-
-static inline int gpio_direction_output(unsigned gpio, int value)
-{
- return rb500_gpio_direction_output(gpio, value);
-}
-
-static inline int gpio_get_value(unsigned gpio)
-{
- return rb500_gpio_get_value(gpio);
-}
-
-static inline void gpio_set_value(unsigned gpio, int value)
-{
- rb500_gpio_set_value(gpio, value);
-}
-
-static inline int gpio_to_irq(unsigned gpio)
-{
- return gpio;
-}
-
-static inline int irq_to_gpio(unsigned irq)
-{
- return irq;
-}
-
-/* For cansleep */
-#include <asm-generic/gpio.h>
-
-#endif /* _RC32434_GPIO_H_ */
+++ /dev/null
-#ifndef __IDT_INTEG_H__
-#define __IDT_INTEG_H__
-
-/*******************************************************************************
- *
- * Copyright 2002 Integrated Device Technology, Inc.
- * All rights reserved.
- *
- * System Integrity register definition.
- *
- *
- * Author : ryan.holmQVist@idt.com
- * Date : 20011005
- * Update :
- * $Log: integ.h,v $
- * Revision 1.3 2002/06/06 18:34:04 astichte
- * Added XXX_PhysicalAddress and XXX_VirtualAddress
- *
- * Revision 1.2 2002/06/05 18:32:33 astichte
- * Removed IDTField
- *
- * Revision 1.1 2002/05/29 17:33:22 sysarch
- * jba File moved from vcode/include/idt/acacia
- *
- ******************************************************************************/
-
-enum
-{
- INTEG0_PhysicalAddress = 0x18030000,
- INTEG_PhysicalAddress = INTEG0_PhysicalAddress, // Default
-
- INTEG0_VirtualAddress = 0xb8030000,
- INTEG_VirtualAddress = INTEG0_VirtualAddress, // Default
-} ;
-
-// if you are looing for CEA, try rst.h
-typedef struct
-{
- u32 filler [0xc] ; // 0x30 bytes unused.
- u32 errcs ; // sticky use ERRCS_
- u32 wtcount ; // Watchdog timer count reg.
- u32 wtcompare ; // Watchdog timer timeout value.
- u32 wtc ; // Watchdog timer control. use WTC_
-} volatile *INTEG_t ;
-
-enum
-{
- ERRCS_wto_b = 0, // In INTEG_t -> errcs
- ERRCS_wto_m = 0x00000001,
- ERRCS_wne_b = 1, // In INTEG_t -> errcs
- ERRCS_wne_m = 0x00000002,
- ERRCS_ucw_b = 2, // In INTEG_t -> errcs
- ERRCS_ucw_m = 0x00000004,
- ERRCS_ucr_b = 3, // In INTEG_t -> errcs
- ERRCS_ucr_m = 0x00000008,
- ERRCS_upw_b = 4, // In INTEG_t -> errcs
- ERRCS_upw_m = 0x00000010,
- ERRCS_upr_b = 5, // In INTEG_t -> errcs
- ERRCS_upr_m = 0x00000020,
- ERRCS_udw_b = 6, // In INTEG_t -> errcs
- ERRCS_udw_m = 0x00000040,
- ERRCS_udr_b = 7, // In INTEG_t -> errcs
- ERRCS_udr_m = 0x00000080,
- ERRCS_sae_b = 8, // In INTEG_t -> errcs
- ERRCS_sae_m = 0x00000100,
- ERRCS_wre_b = 9, // In INTEG_t -> errcs
- ERRCS_wre_m = 0x00000200,
-
- WTC_en_b = 0, // In INTEG_t -> wtc
- WTC_en_m = 0x00000001,
- WTC_to_b = 1, // In INTEG_t -> wtc
- WTC_to_m = 0x00000002,
-} ;
-
-#endif // __IDT_INTEG_H__
+++ /dev/null
-#ifndef __ASM_MACH_MIPS_IRQ_H
-#define __ASM_MACH_MIPS_IRQ_H
-
-#define NR_IRQS 256
-#include_next <irq.h>
-
-#endif /* __ASM_MACH_MIPS_IRQ_H */
+++ /dev/null
-/**************************************************************************
- *
- * BRIEF MODULE DESCRIPTION
- * PCI register definitio
- *
- * Copyright 2004 IDT Inc. (rischelp@idt.com)
- *
- * This program is free software; you can redistribute it and/or modify it
- * under the terms of the GNU General Public License as published by the
- * Free Software Foundation; either version 2 of the License, or (at your
- * option) any later version.
- *
- * THIS SOFTWARE IS PROVIDED ``AS IS'' AND ANY EXPRESS OR IMPLIED
- * WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN
- * NO EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT,
- * INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF
- * USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON
- * ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT
- * (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF
- * THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- *
- * You should have received a copy of the GNU General Public License along
- * with this program; if not, write to the Free Software Foundation, Inc.,
- * 675 Mass Ave, Cambridge, MA 02139, USA.
- *
- *
- **************************************************************************
- * May 2004 rkt, neb.
- *
- * Initial Release
- *
- *
- *
- **************************************************************************
- */
-
-#ifndef __IDT_PCI_H__
-#define __IDT_PCI_H__
-
-enum
-{
- PCI0_PhysicalAddress = 0x18080000,
- PCI_PhysicalAddress = PCI0_PhysicalAddress,
-
- PCI0_VirtualAddress = 0xB8080000,
- PCI_VirtualAddress = PCI0_VirtualAddress,
-} ;
-
-enum
-{
- PCI_LbaCount = 4, // Local base addresses.
-} ;
-
-typedef struct
-{
- u32 a ; // Address.
- u32 c ; // Control.
- u32 m ; // mapping.
-} PCI_Map_s ;
-
-typedef struct
-{
- u32 pcic ;
- u32 pcis ;
- u32 pcism ;
- u32 pcicfga ;
- u32 pcicfgd ;
- PCI_Map_s pcilba [PCI_LbaCount] ;
- u32 pcidac ;
- u32 pcidas ;
- u32 pcidasm ;
- u32 pcidad ;
- u32 pcidma8c ;
- u32 pcidma9c ;
- u32 pcitc ;
-} volatile *PCI_t ;
-
-// PCI messaging unit.
-enum
-{
- PCIM_Count = 2,
-} ;
-typedef struct
-{
- u32 pciim [PCIM_Count] ;
- u32 pciom [PCIM_Count] ;
- u32 pciid ;
- u32 pciiic ;
- u32 pciiim ;
- u32 pciiod ;
- u32 pciioic ;
- u32 pciioim ;
-} volatile *PCIM_t ;
-
-/*******************************************************************************
- *
- * PCI Control Register
- *
- ******************************************************************************/
-enum
-{
- PCIC_en_b = 0,
- PCIC_en_m = 0x00000001,
- PCIC_tnr_b = 1,
- PCIC_tnr_m = 0x00000002,
- PCIC_sce_b = 2,
- PCIC_sce_m = 0x00000004,
- PCIC_ien_b = 3,
- PCIC_ien_m = 0x00000008,
- PCIC_aaa_b = 4,
- PCIC_aaa_m = 0x00000010,
- PCIC_eap_b = 5,
- PCIC_eap_m = 0x00000020,
- PCIC_pcim_b = 6,
- PCIC_pcim_m = 0x000001c0,
- PCIC_pcim_disabled_v = 0,
- PCIC_pcim_tnr_v = 1, // Satellite - target not ready
- PCIC_pcim_suspend_v = 2, // Satellite - suspended CPU.
- PCIC_pcim_extern_v = 3, // Host - external arbiter.
- PCIC_pcim_fixed_v = 4, // Host - fixed priority arb.
- PCIC_pcim_roundrobin_v = 5, // Host - round robin priority.
- PCIC_pcim_reserved6_v = 6,
- PCIC_pcim_reserved7_v = 7,
- PCIC_igm_b = 9,
- PCIC_igm_m = 0x00000200,
-} ;
-
-/*******************************************************************************
- *
- * PCI Status Register
- *
- ******************************************************************************/
-enum {
- PCIS_eed_b = 0,
- PCIS_eed_m = 0x00000001,
- PCIS_wr_b = 1,
- PCIS_wr_m = 0x00000002,
- PCIS_nmi_b = 2,
- PCIS_nmi_m = 0x00000004,
- PCIS_ii_b = 3,
- PCIS_ii_m = 0x00000008,
- PCIS_cwe_b = 4,
- PCIS_cwe_m = 0x00000010,
- PCIS_cre_b = 5,
- PCIS_cre_m = 0x00000020,
- PCIS_mdpe_b = 6,
- PCIS_mdpe_m = 0x00000040,
- PCIS_sta_b = 7,
- PCIS_sta_m = 0x00000080,
- PCIS_rta_b = 8,
- PCIS_rta_m = 0x00000100,
- PCIS_rma_b = 9,
- PCIS_rma_m = 0x00000200,
- PCIS_sse_b = 10,
- PCIS_sse_m = 0x00000400,
- PCIS_ose_b = 11,
- PCIS_ose_m = 0x00000800,
- PCIS_pe_b = 12,
- PCIS_pe_m = 0x00001000,
- PCIS_tae_b = 13,
- PCIS_tae_m = 0x00002000,
- PCIS_rle_b = 14,
- PCIS_rle_m = 0x00004000,
- PCIS_bme_b = 15,
- PCIS_bme_m = 0x00008000,
- PCIS_prd_b = 16,
- PCIS_prd_m = 0x00010000,
- PCIS_rip_b = 17,
- PCIS_rip_m = 0x00020000,
-} ;
-
-/*******************************************************************************
- *
- * PCI Status Mask Register
- *
- ******************************************************************************/
-enum {
- PCISM_eed_b = 0,
- PCISM_eed_m = 0x00000001,
- PCISM_wr_b = 1,
- PCISM_wr_m = 0x00000002,
- PCISM_nmi_b = 2,
- PCISM_nmi_m = 0x00000004,
- PCISM_ii_b = 3,
- PCISM_ii_m = 0x00000008,
- PCISM_cwe_b = 4,
- PCISM_cwe_m = 0x00000010,
- PCISM_cre_b = 5,
- PCISM_cre_m = 0x00000020,
- PCISM_mdpe_b = 6,
- PCISM_mdpe_m = 0x00000040,
- PCISM_sta_b = 7,
- PCISM_sta_m = 0x00000080,
- PCISM_rta_b = 8,
- PCISM_rta_m = 0x00000100,
- PCISM_rma_b = 9,
- PCISM_rma_m = 0x00000200,
- PCISM_sse_b = 10,
- PCISM_sse_m = 0x00000400,
- PCISM_ose_b = 11,
- PCISM_ose_m = 0x00000800,
- PCISM_pe_b = 12,
- PCISM_pe_m = 0x00001000,
- PCISM_tae_b = 13,
- PCISM_tae_m = 0x00002000,
- PCISM_rle_b = 14,
- PCISM_rle_m = 0x00004000,
- PCISM_bme_b = 15,
- PCISM_bme_m = 0x00008000,
- PCISM_prd_b = 16,
- PCISM_prd_m = 0x00010000,
- PCISM_rip_b = 17,
- PCISM_rip_m = 0x00020000,
-} ;
-
-/*******************************************************************************
- *
- * PCI Configuration Address Register
- *
- ******************************************************************************/
-enum {
- PCICFGA_reg_b = 2,
- PCICFGA_reg_m = 0x000000fc,
- PCICFGA_reg_id_v = 0x00>>2, //use PCFGID_
- PCICFGA_reg_04_v = 0x04>>2, //use PCFG04_
- PCICFGA_reg_08_v = 0x08>>2, //use PCFG08_
- PCICFGA_reg_0C_v = 0x0C>>2, //use PCFG0C_
- PCICFGA_reg_pba0_v = 0x10>>2, //use PCIPBA_
- PCICFGA_reg_pba1_v = 0x14>>2, //use PCIPBA_
- PCICFGA_reg_pba2_v = 0x18>>2, //use PCIPBA_
- PCICFGA_reg_pba3_v = 0x1c>>2, //use PCIPBA_
- PCICFGA_reg_subsystem_v = 0x2c>>2, //use PCFGSS_
- PCICFGA_reg_3C_v = 0x3C>>2, //use PCFG3C_
- PCICFGA_reg_pba0c_v = 0x44>>2, //use PCIPBAC_
- PCICFGA_reg_pba0m_v = 0x48>>2,
- PCICFGA_reg_pba1c_v = 0x4c>>2, //use PCIPBAC_
- PCICFGA_reg_pba1m_v = 0x50>>2,
- PCICFGA_reg_pba2c_v = 0x54>>2, //use PCIPBAC_
- PCICFGA_reg_pba2m_v = 0x58>>2,
- PCICFGA_reg_pba3c_v = 0x5c>>2, //use PCIPBAC_
- PCICFGA_reg_pba3m_v = 0x60>>2,
- PCICFGA_reg_pmgt_v = 0x64>>2,
- PCICFGA_func_b = 8,
- PCICFGA_func_m = 0x00000700,
- PCICFGA_dev_b = 11,
- PCICFGA_dev_m = 0x0000f800,
- PCICFGA_dev_internal_v = 0,
- PCICFGA_bus_b = 16,
- PCICFGA_bus_m = 0x00ff0000,
- PCICFGA_bus_type0_v = 0, //local bus
- PCICFGA_en_b = 31, // read only
- PCICFGA_en_m = 0x80000000,
-} ;
-
-enum {
- PCFGID_vendor_b = 0,
- PCFGID_vendor_m = 0x0000ffff,
- PCFGID_vendor_IDT_v = 0x111d,
- PCFGID_device_b = 16,
- PCFGID_device_m = 0xffff0000,
- PCFGID_device_Korinade_v = 0x0214,
-
- PCFG04_command_ioena_b = 1,
- PCFG04_command_ioena_m = 0x00000001,
- PCFG04_command_memena_b = 2,
- PCFG04_command_memena_m = 0x00000002,
- PCFG04_command_bmena_b = 3,
- PCFG04_command_bmena_m = 0x00000004,
- PCFG04_command_mwinv_b = 5,
- PCFG04_command_mwinv_m = 0x00000010,
- PCFG04_command_parena_b = 7,
- PCFG04_command_parena_m = 0x00000040,
- PCFG04_command_serrena_b = 9,
- PCFG04_command_serrena_m = 0x00000100,
- PCFG04_command_fastbbena_b = 10,
- PCFG04_command_fastbbena_m = 0x00000200,
- PCFG04_status_b = 16,
- PCFG04_status_m = 0xffff0000,
- PCFG04_status_66MHz_b = 21, // 66 MHz enable
- PCFG04_status_66MHz_m = 0x00200000,
- PCFG04_status_fbb_b = 23,
- PCFG04_status_fbb_m = 0x00800000,
- PCFG04_status_mdpe_b = 24,
- PCFG04_status_mdpe_m = 0x01000000,
- PCFG04_status_dst_b = 25,
- PCFG04_status_dst_m = 0x06000000,
- PCFG04_status_sta_b = 27,
- PCFG04_status_sta_m = 0x08000000,
- PCFG04_status_rta_b = 28,
- PCFG04_status_rta_m = 0x10000000,
- PCFG04_status_rma_b = 29,
- PCFG04_status_rma_m = 0x20000000,
- PCFG04_status_sse_b = 30,
- PCFG04_status_sse_m = 0x40000000,
- PCFG04_status_pe_b = 31,
- PCFG04_status_pe_m = 0x40000000,
-
- PCFG08_revId_b = 0,
- PCFG08_revId_m = 0x000000ff,
- PCFG08_classCode_b = 0,
- PCFG08_classCode_m = 0xffffff00,
- PCFG08_classCode_bridge_v = 06,
- PCFG08_classCode_proc_v = 0x0b3000, // processor-MIPS
- PCFG0C_cacheline_b = 0,
- PCFG0C_cacheline_m = 0x000000ff,
- PCFG0C_masterLatency_b = 8,
- PCFG0C_masterLatency_m = 0x0000ff00,
- PCFG0C_headerType_b = 16,
- PCFG0C_headerType_m = 0x00ff0000,
- PCFG0C_bist_b = 24,
- PCFG0C_bist_m = 0xff000000,
-
- PCIPBA_msi_b = 0,
- PCIPBA_msi_m = 0x00000001,
- PCIPBA_p_b = 3,
- PCIPBA_p_m = 0x00000004,
- PCIPBA_baddr_b = 8,
- PCIPBA_baddr_m = 0xffffff00,
-
- PCFGSS_vendorId_b = 0,
- PCFGSS_vendorId_m = 0x0000ffff,
- PCFGSS_id_b = 16,
- PCFGSS_id_m = 0xffff0000,
-
- PCFG3C_interruptLine_b = 0,
- PCFG3C_interruptLine_m = 0x000000ff,
- PCFG3C_interruptPin_b = 8,
- PCFG3C_interruptPin_m = 0x0000ff00,
- PCFG3C_minGrant_b = 16,
- PCFG3C_minGrant_m = 0x00ff0000,
- PCFG3C_maxLat_b = 24,
- PCFG3C_maxLat_m = 0xff000000,
-
- PCIPBAC_msi_b = 0,
- PCIPBAC_msi_m = 0x00000001,
- PCIPBAC_p_b = 1,
- PCIPBAC_p_m = 0x00000002,
- PCIPBAC_size_b = 2,
- PCIPBAC_size_m = 0x0000007c,
- PCIPBAC_sb_b = 7,
- PCIPBAC_sb_m = 0x00000080,
- PCIPBAC_pp_b = 8,
- PCIPBAC_pp_m = 0x00000100,
- PCIPBAC_mr_b = 9,
- PCIPBAC_mr_m = 0x00000600,
- PCIPBAC_mr_read_v =0, //no prefetching
- PCIPBAC_mr_readLine_v =1,
- PCIPBAC_mr_readMult_v =2,
- PCIPBAC_mrl_b = 11,
- PCIPBAC_mrl_m = 0x00000800,
- PCIPBAC_mrm_b = 12,
- PCIPBAC_mrm_m = 0x00001000,
- PCIPBAC_trp_b = 13,
- PCIPBAC_trp_m = 0x00002000,
-
- PCFG40_trdyTimeout_b = 0,
- PCFG40_trdyTimeout_m = 0x000000ff,
- PCFG40_retryLim_b = 8,
- PCFG40_retryLim_m = 0x0000ff00,
-};
-
-/*******************************************************************************
- *
- * PCI Local Base Address [0|1|2|3] Register
- *
- ******************************************************************************/
-enum {
- PCILBA_baddr_b = 0, // In PCI_t -> pcilba [] .a
- PCILBA_baddr_m = 0xffffff00,
-} ;
-/*******************************************************************************
- *
- * PCI Local Base Address Control Register
- *
- ******************************************************************************/
-enum {
- PCILBAC_msi_b = 0, // In pPci->pcilba[i].c
- PCILBAC_msi_m = 0x00000001,
- PCILBAC_msi_mem_v = 0,
- PCILBAC_msi_io_v = 1,
- PCILBAC_size_b = 2, // In pPci->pcilba[i].c
- PCILBAC_size_m = 0x0000007c,
- PCILBAC_sb_b = 7, // In pPci->pcilba[i].c
- PCILBAC_sb_m = 0x00000080,
- PCILBAC_rt_b = 8, // In pPci->pcilba[i].c
- PCILBAC_rt_m = 0x00000100,
- PCILBAC_rt_noprefetch_v = 0, // mem read
- PCILBAC_rt_prefetch_v = 1, // mem readline
-} ;
-
-/*******************************************************************************
- *
- * PCI Local Base Address [0|1|2|3] Mapping Register
- *
- ******************************************************************************/
-enum {
- PCILBAM_maddr_b = 8,
- PCILBAM_maddr_m = 0xffffff00,
-} ;
-
-/*******************************************************************************
- *
- * PCI Decoupled Access Control Register
- *
- ******************************************************************************/
-enum {
- PCIDAC_den_b = 0,
- PCIDAC_den_m = 0x00000001,
-} ;
-
-/*******************************************************************************
- *
- * PCI Decoupled Access Status Register
- *
- ******************************************************************************/
-enum {
- PCIDAS_d_b = 0,
- PCIDAS_d_m = 0x00000001,
- PCIDAS_b_b = 1,
- PCIDAS_b_m = 0x00000002,
- PCIDAS_e_b = 2,
- PCIDAS_e_m = 0x00000004,
- PCIDAS_ofe_b = 3,
- PCIDAS_ofe_m = 0x00000008,
- PCIDAS_off_b = 4,
- PCIDAS_off_m = 0x00000010,
- PCIDAS_ife_b = 5,
- PCIDAS_ife_m = 0x00000020,
- PCIDAS_iff_b = 6,
- PCIDAS_iff_m = 0x00000040,
-} ;
-
-/*******************************************************************************
- *
- * PCI DMA Channel 8 Configuration Register
- *
- ******************************************************************************/
-enum
-{
- PCIDMA8C_mbs_b = 0, // Maximum Burst Size.
- PCIDMA8C_mbs_m = 0x00000fff, // { pcidma8c }
- PCIDMA8C_our_b = 12, // Optimize Unaligned Burst Reads.
- PCIDMA8C_our_m = 0x00001000, // { pcidma8c }
-} ;
-
-/*******************************************************************************
- *
- * PCI DMA Channel 9 Configuration Register
- *
- ******************************************************************************/
-enum
-{
- PCIDMA9C_mbs_b = 0, // Maximum Burst Size.
- PCIDMA9C_mbs_m = 0x00000fff, // { pcidma9c }
-} ;
-
-/*******************************************************************************
- *
- * PCI to Memory(DMA Channel 8) AND Memory to PCI DMA(DMA Channel 9)Descriptors
- *
- ******************************************************************************/
-enum {
- PCIDMAD_pt_b = 22, // in DEVCMD field (descriptor)
- PCIDMAD_pt_m = 0x00c00000, // preferred transaction field
- // These are for reads (DMA channel 8)
- PCIDMAD_devcmd_mr_v = 0, //memory read
- PCIDMAD_devcmd_mrl_v = 1, //memory read line
- PCIDMAD_devcmd_mrm_v = 2, //memory read multiple
- PCIDMAD_devcmd_ior_v = 3, //I/O read
- // These are for writes (DMA channel 9)
- PCIDMAD_devcmd_mw_v = 0, //memory write
- PCIDMAD_devcmd_mwi_v = 1, //memory write invalidate
- PCIDMAD_devcmd_iow_v = 3, //I/O write
-
- // Swap byte field applies to both DMA channel 8 and 9
- PCIDMAD_sb_b = 24, // in DEVCMD field (descriptor)
- PCIDMAD_sb_m = 0x01000000, // swap byte field
-} ;
-
-
-/*******************************************************************************
- *
- * PCI Target Control Register
- *
- ******************************************************************************/
-enum
-{
- PCITC_rtimer_b = 0, // In PCITC_t -> pcitc
- PCITC_rtimer_m = 0x000000ff,
- PCITC_dtimer_b = 8, // In PCITC_t -> pcitc
- PCITC_dtimer_m = 0x0000ff00,
- PCITC_rdr_b = 18, // In PCITC_t -> pcitc
- PCITC_rdr_m = 0x00040000,
- PCITC_ddt_b = 19, // In PCITC_t -> pcitc
- PCITC_ddt_m = 0x00080000,
-} ;
-/*******************************************************************************
- *
- * PCI messaging unit [applies to both inbound and outbound registers ]
- *
- ******************************************************************************/
-enum
-{
- PCIM_m0_b = 0, // In PCIM_t -> {pci{iic,iim,ioic,ioim}}
- PCIM_m0_m = 0x00000001, // inbound or outbound message 0
- PCIM_m1_b = 1, // In PCIM_t -> {pci{iic,iim,ioic,ioim}}
- PCIM_m1_m = 0x00000002, // inbound or outbound message 1
- PCIM_db_b = 2, // In PCIM_t -> {pci{iic,iim,ioic,ioim}}
- PCIM_db_m = 0x00000004, // inbound or outbound doorbell
-};
-
-
-
-
-
-
-#define PCI_MSG_VirtualAddress 0xB8088010
-#define rc32434_pci ((volatile PCI_t) PCI0_VirtualAddress)
-#define rc32434_pci_msg ((volatile PCIM_t) PCI_MSG_VirtualAddress)
-
-#define PCIM_SHFT 0x6
-#define PCIM_BIT_LEN 0x7
-#define PCIM_H_EA 0x3
-#define PCIM_H_IA_FIX 0x4
-#define PCIM_H_IA_RR 0x5
-
-#define PCI_ADDR_START 0x50000000
-
-#define CPUTOPCI_MEM_WIN 0x02000000
-#define CPUTOPCI_IO_WIN 0x00100000
-#define PCILBA_SIZE_SHFT 2
-#define PCILBA_SIZE_MASK 0x1F
-#define SIZE_256MB 0x1C
-#define SIZE_128MB 0x1B
-#define SIZE_64MB 0x1A
-#define SIZE_32MB 0x19
-#define SIZE_16MB 0x18
-#define SIZE_4MB 0x16
-#define SIZE_2MB 0x15
-#define SIZE_1MB 0x14
-#define KORINA_CONFIG0_ADDR 0x80000000
-#define KORINA_CONFIG1_ADDR 0x80000004
-#define KORINA_CONFIG2_ADDR 0x80000008
-#define KORINA_CONFIG3_ADDR 0x8000000C
-#define KORINA_CONFIG4_ADDR 0x80000010
-#define KORINA_CONFIG5_ADDR 0x80000014
-#define KORINA_CONFIG6_ADDR 0x80000018
-#define KORINA_CONFIG7_ADDR 0x8000001C
-#define KORINA_CONFIG8_ADDR 0x80000020
-#define KORINA_CONFIG9_ADDR 0x80000024
-#define KORINA_CONFIG10_ADDR 0x80000028
-#define KORINA_CONFIG11_ADDR 0x8000002C
-#define KORINA_CONFIG12_ADDR 0x80000030
-#define KORINA_CONFIG13_ADDR 0x80000034
-#define KORINA_CONFIG14_ADDR 0x80000038
-#define KORINA_CONFIG15_ADDR 0x8000003C
-#define KORINA_CONFIG16_ADDR 0x80000040
-#define KORINA_CONFIG17_ADDR 0x80000044
-#define KORINA_CONFIG18_ADDR 0x80000048
-#define KORINA_CONFIG19_ADDR 0x8000004C
-#define KORINA_CONFIG20_ADDR 0x80000050
-#define KORINA_CONFIG21_ADDR 0x80000054
-#define KORINA_CONFIG22_ADDR 0x80000058
-#define KORINA_CONFIG23_ADDR 0x8000005C
-#define KORINA_CONFIG24_ADDR 0x80000060
-#define KORINA_CONFIG25_ADDR 0x80000064
-#define KORINA_CMD (PCFG04_command_ioena_m | \
- PCFG04_command_memena_m | \
- PCFG04_command_bmena_m | \
- PCFG04_command_mwinv_m | \
- PCFG04_command_parena_m | \
- PCFG04_command_serrena_m )
-
-#define KORINA_STAT (PCFG04_status_mdpe_m | \
- PCFG04_status_sta_m | \
- PCFG04_status_rta_m | \
- PCFG04_status_rma_m | \
- PCFG04_status_sse_m | \
- PCFG04_status_pe_m)
-
-#define KORINA_CNFG1 ((KORINA_STAT<<16)|KORINA_CMD)
-
-#define KORINA_REVID 0
-#define KORINA_CLASS_CODE 0
-#define KORINA_CNFG2 ((KORINA_CLASS_CODE<<8) | \
- KORINA_REVID)
-
-#define KORINA_CACHE_LINE_SIZE 4
-#define KORINA_MASTER_LAT 0x3c
-#define KORINA_HEADER_TYPE 0
-#define KORINA_BIST 0
-
-#define KORINA_CNFG3 ((KORINA_BIST << 24) | \
- (KORINA_HEADER_TYPE<<16) | \
- (KORINA_MASTER_LAT<<8) | \
- KORINA_CACHE_LINE_SIZE )
-
-#define KORINA_BAR0 0x00000008 /* 128 MB Memory */
-#define KORINA_BAR1 0x18800001 /* 1 MB IO */
-#define KORINA_BAR2 0x18000001 /* 2 MB IO window for Korina
- internal Registers */
-#define KORINA_BAR3 0x48000008 /* Spare 128 MB Memory */
-
-#define KORINA_CNFG4 KORINA_BAR0
-#define KORINA_CNFG5 KORINA_BAR1
-#define KORINA_CNFG6 KORINA_BAR2
-#define KORINA_CNFG7 KORINA_BAR3
-
-#define KORINA_SUBSYS_VENDOR_ID 0x011d
-#define KORINA_SUBSYSTEM_ID 0x0214
-#define KORINA_CNFG8 0
-#define KORINA_CNFG9 0
-#define KORINA_CNFG10 0
-#define KORINA_CNFG11 ((KORINA_SUBSYS_VENDOR_ID<<16) | \
- KORINA_SUBSYSTEM_ID)
-#define KORINA_INT_LINE 1
-#define KORINA_INT_PIN 1
-#define KORINA_MIN_GNT 8
-#define KORINA_MAX_LAT 0x38
-#define KORINA_CNFG12 0
-#define KORINA_CNFG13 0
-#define KORINA_CNFG14 0
-#define KORINA_CNFG15 ((KORINA_MAX_LAT<<24) | \
- (KORINA_MIN_GNT<<16) | \
- (KORINA_INT_PIN<<8) | \
- KORINA_INT_LINE)
-#define KORINA_RETRY_LIMIT 0x80
-#define KORINA_TRDY_LIMIT 0x80
-#define KORINA_CNFG16 ((KORINA_RETRY_LIMIT<<8) | \
- KORINA_TRDY_LIMIT)
-#define PCI_PBAxC_R 0x0
-#define PCI_PBAxC_RL 0x1
-#define PCI_PBAxC_RM 0x2
-#define SIZE_SHFT 2
-
-#if defined(__MIPSEB__)
-#define KORINA_PBA0C ( PCIPBAC_mrl_m | PCIPBAC_sb_m | \
- ((PCI_PBAxC_RM &0x3) << PCIPBAC_mr_b) | \
- PCIPBAC_pp_m | \
- (SIZE_128MB<<SIZE_SHFT) | \
- PCIPBAC_p_m)
-#else
-#define KORINA_PBA0C ( PCIPBAC_mrl_m | \
- ((PCI_PBAxC_RM &0x3) << PCIPBAC_mr_b) | \
- PCIPBAC_pp_m | \
- (SIZE_128MB<<SIZE_SHFT) | \
- PCIPBAC_p_m)
-#endif
-#define KORINA_CNFG17 KORINA_PBA0C
-#define KORINA_PBA0M 0x0
-#define KORINA_CNFG18 KORINA_PBA0M
-
-#if defined(__MIPSEB__)
-#define KORINA_PBA1C ((SIZE_1MB<<SIZE_SHFT) | PCIPBAC_sb_m | \
- PCIPBAC_msi_m)
-#else
-#define KORINA_PBA1C ((SIZE_1MB<<SIZE_SHFT) | \
- PCIPBAC_msi_m)
-#endif
-#define KORINA_CNFG19 KORINA_PBA1C
-#define KORINA_PBA1M 0x0
-#define KORINA_CNFG20 KORINA_PBA1M
-
-#if defined(__MIPSEB__)
-#define KORINA_PBA2C ((SIZE_2MB<<SIZE_SHFT) | PCIPBAC_sb_m | \
- PCIPBAC_msi_m)
-#else
-#define KORINA_PBA2C ((SIZE_2MB<<SIZE_SHFT) | \
- PCIPBAC_msi_m)
-#endif
-#define KORINA_CNFG21 KORINA_PBA2C
-#define KORINA_PBA2M 0x18000000
-#define KORINA_CNFG22 KORINA_PBA2M
-#define KORINA_PBA3C 0
-#define KORINA_CNFG23 KORINA_PBA3C
-#define KORINA_PBA3M 0
-#define KORINA_CNFG24 KORINA_PBA3M
-
-
-
-#define PCITC_DTIMER_VAL 8
-#define PCITC_RTIMER_VAL 0x10
-
-
-
-
-#endif // __IDT_PCI_H__
-
-
-
+++ /dev/null
-/*
- * Copyright (C) 2004 IDT Inc.
- * Copyright (C) 2006 Felix Fietkau <nbd@openwrt.org>
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- */
-#ifndef __MIPS_RB_H__
-#define __MIPS_RB_H__
-#include <linux/genhd.h>
-
-#define IDT434_REG_BASE ((volatile void *) KSEG1ADDR(0x18000000))
-#define DEV0BASE 0x010000
-#define DEV0MASK 0x010004
-#define DEV0C 0x010008
-#define DEV0TC 0x01000C
-#define DEV1BASE 0x010010
-#define DEV1MASK 0x010014
-#define DEV1C 0x010018
-#define DEV1TC 0x01001C
-#define DEV2BASE 0x010020
-#define DEV2MASK 0x010024
-#define DEV2C 0x010028
-#define DEV2TC 0x01002C
-#define DEV3BASE 0x010030
-#define DEV3MASK 0x010034
-#define DEV3C 0x010038
-#define DEV3TC 0x01003C
-#define BTCS 0x010040
-#define BTCOMPARE 0x010044
-#define GPIOFUNC 0x050000
-#define GPIOCFG 0x050004
-#define GPIOD 0x050008
-#define GPIOILEVEL 0x05000C
-#define GPIOISTAT 0x050010
-#define GPIONMIEN 0x050014
-#define IMASK6 0x038038
-
-#define LO_WPX (1 << 0)
-#define LO_ALE (1 << 1)
-#define LO_CLE (1 << 2)
-#define LO_CEX (1 << 3)
-#define LO_FOFF (1 << 5)
-#define LO_SPICS (1 << 6)
-#define LO_ULED (1 << 7)
-
-typedef enum {
- FUNC = 0x00,
- CFG = 0x04,
- DATA = 0x08,
- ILEVEL = 0x0c,
- ISTAT = 0x10,
- NMIEN = 0x14
-} gpio_func;
-
-extern void changeLatchU5(unsigned char orMask, unsigned char nandMask);
-extern unsigned get434Reg(unsigned regOffs);
-extern void set434Reg(unsigned regOffs, unsigned bit, unsigned len, unsigned val);
-extern void gpio_set(gpio_func func, u32 mask, u32 value);
-extern u32 gpio_get(gpio_func func);
-
-#define get434Reg(x) (*(volatile unsigned *) (IDT434_REG_BASE + (x)))
-
-struct korina_device {
- char *name;
- unsigned char mac[6];
- struct net_device *dev;
-};
-
-struct cf_device {
- int gpio_pin;
- void *dev;
- struct gendisk *gd;
-};
-
-#endif
+++ /dev/null
-/*
- ***************************************************************************
- * Definitions for IDT RC323434 CPU.
- *
- ****************************************************************************
- * Kiran Rao
- *
- * Original form
- ****************************************************************************
- * P. Sadik Oct 08, 2003
- *
- * Started revision history
- * Made IDT_BUS_FREQ a kernel configuration parameter
- ****************************************************************************
- * P. Sadik Oct 10, 2003
- *
- * Removed IDT_BUS_FREQ, since this parameter is no longer required. Instead
- * idt_cpu_freq is used everywhere
- ****************************************************************************
- * P. Sadik Oct 20, 2003
- *
- * Removed RC32434_BASE_BAUD
- ****************************************************************************
-*/
-#ifndef _RC32434_H_
-#define _RC32434_H_
-
-#include <linux/autoconf.h>
-#include <linux/delay.h>
-#include <asm/io.h>
-
-#define RC32434_REG_BASE 0x18000000
-
-#define interrupt ((volatile INT_t ) INT0_VirtualAddress)
-
-
-#define IDT_CLOCK_MULT 2
-#define MIPS_CPU_TIMER_IRQ 7
-/* Interrupt Controller */
-#define IC_GROUP0_PEND (RC32434_REG_BASE + 0x38000)
-#define IC_GROUP0_MASK (RC32434_REG_BASE + 0x38008)
-#define IC_GROUP_OFFSET 0x0C
-
-#define NUM_INTR_GROUPS 5
-/* 16550 UARTs */
-
-#define GROUP0_IRQ_BASE 8 /* GRP2 IRQ numbers start here */
-#define GROUP1_IRQ_BASE (GROUP0_IRQ_BASE + 32) /* GRP3 IRQ numbers start here */
-#define GROUP2_IRQ_BASE (GROUP1_IRQ_BASE + 32) /* GRP4 IRQ numbers start here */
-#define GROUP3_IRQ_BASE (GROUP2_IRQ_BASE + 32) /* GRP5 IRQ numbers start here */
-#define GROUP4_IRQ_BASE (GROUP3_IRQ_BASE + 32)
-
-
-#ifdef __MIPSEB__
-#define RC32434_UART0_BASE (RC32434_REG_BASE + 0x58003)
-#else
-#define RC32434_UART0_BASE (RC32434_REG_BASE + 0x58000)
-#endif
-
-#define RC32434_UART0_IRQ GROUP3_IRQ_BASE + 0
-// #define EB434_UART1_IRQ GROUP4_IRQ_BASE + 11
-
-#define local_readl(addr) __raw_readl(addr)
-#define local_writel(l,addr) __raw_writel(l,addr)
-
-/* cpu pipeline flush */
-static inline void rc32434_sync(void)
-{
- __asm__ volatile ("sync");
-}
-
-static inline void rc32434_sync_udelay(int us)
-{
- __asm__ volatile ("sync");
- udelay(us);
-}
-
-static inline void rc32434_sync_delay(int ms)
-{
- __asm__ volatile ("sync");
- mdelay(ms);
-}
-
-/*
- * C access to CLZ and CLO instructions
- * (count leading zeroes/ones).
- */
-static inline int rc32434_clz(unsigned long val)
-{
- int ret;
- __asm__ volatile (
- ".set\tnoreorder\n\t"
- ".set\tnoat\n\t"
- ".set\tmips32\n\t"
- "clz\t%0,%1\n\t"
- ".set\tmips0\n\t"
- ".set\tat\n\t"
- ".set\treorder"
- : "=r" (ret)
- : "r" (val));
-
- return ret;
-}
-static inline int rc32434_clo(unsigned long val)
-{
- int ret;
- __asm__ volatile (
- ".set\tnoreorder\n\t"
- ".set\tnoat\n\t"
- ".set\tmips32\n\t"
- "clo\t%0,%1\n\t"
- ".set\tmips0\n\t"
- ".set\tat\n\t"
- ".set\treorder"
- : "=r" (ret)
- : "r" (val));
-
- return ret;
-}
-
-#endif /* _RC32434_H_ */
+++ /dev/null
-/*
- * This file is subject to the terms and conditions of the GNU General Public
- * License. See the file "COPYING" in the main directory of this archive
- * for more details.
- *
- * Copyright (C) 2002, 2004, 2007 by Ralf Baechle <ralf@linux-mips.org>
- */
-#ifndef __ASM_MIPS_MACH_MIPS_WAR_H
-#define __ASM_MIPS_MACH_MIPS_WAR_H
-
-#define R4600_V1_INDEX_ICACHEOP_WAR 0
-#define R4600_V1_HIT_CACHEOP_WAR 0
-#define R4600_V2_HIT_CACHEOP_WAR 0
-#define R5432_CP0_INTERRUPT_WAR 0
-#define BCM1250_M3_WAR 0
-#define SIBYTE_1956_WAR 0
-#define MIPS4K_ICACHE_REFILL_WAR 1
-#define MIPS_CACHE_SYNC_WAR 0
-#define TX49XX_ICACHE_INDEX_INV_WAR 0
-#define RM9000_CDEX_SMP_WAR 0
-#define ICACHE_REFILLS_WORKAROUND_WAR 0
-#define R10000_LLSC_WAR 0
-#define MIPS34K_MISSED_ITLB_WAR 0
-
-#endif /* __ASM_MIPS_MACH_MIPS_WAR_H */
+++ /dev/null
---- a/arch/mips/Kconfig
-+++ b/arch/mips/Kconfig
-@@ -687,6 +687,23 @@ config WR_PPMC
- This enables support for the Wind River MIPS32 4KC PPMC evaluation
- board, which is based on GT64120 bridge chip.
-
-+config MIKROTIK_RB500
-+ bool "Support for RB5xx boards"
-+ select HW_HAS_PCI
-+ select CEVT_R4K
-+ select CSRC_R4K
-+ select IRQ_CPU
-+ select SYS_HAS_CPU_MIPS32_R1
-+ select SYS_SUPPORTS_LITTLE_ENDIAN
-+ select SYS_SUPPORTS_32BIT_KERNEL
-+ select SWAP_IO_SPACE
-+ select DMA_NONCOHERENT
-+ select GENERIC_GPIO
-+ help
-+ Support the Mikrotik(tm) Routerboard 500 series,
-+ such as the RB532.
-+
-+
- endchoice
-
- source "arch/mips/au1000/Kconfig"
-@@ -967,6 +984,7 @@ config MIPS_L1_CACHE_SHIFT
- default "4" if MACH_DECSTATION
- default "7" if SGI_IP27 || SNI_RM
- default "4" if PMC_MSP4200_EVAL
-+ default "4" if MIKROTIK_RB500
- default "5"
-
- config HAVE_STD_PC_SERIAL_PORT
---- a/arch/mips/Makefile
-+++ b/arch/mips/Makefile
-@@ -297,6 +297,13 @@ load-$(CONFIG_LEMOTE_FULONG) +=0xfffffff
- cflags-$(CONFIG_LEMOTE_FULONG) += -Iinclude/asm-mips/mach-lemote
-
- #
-+# Routerboard 532 board
-+#
-+core-$(CONFIG_MIKROTIK_RB500) += arch/mips/rb500/
-+cflags-$(CONFIG_MIKROTIK_RB500) += -Iinclude/asm-mips/rc32434
-+load-$(CONFIG_MIKROTIK_RB500) += 0xffffffff80101000
-+
-+#
- # For all MIPS, Inc. eval boards
- #
- core-$(CONFIG_MIPS_BOARDS_GEN) += arch/mips/mips-boards/generic/
---- a/arch/mips/pci/Makefile
-+++ b/arch/mips/pci/Makefile
-@@ -48,3 +48,4 @@ obj-$(CONFIG_TOSHIBA_RBTX4938) += fixup-
- obj-$(CONFIG_VICTOR_MPC30X) += fixup-mpc30x.o
- obj-$(CONFIG_ZAO_CAPCELLA) += fixup-capcella.o
- obj-$(CONFIG_WR_PPMC) += fixup-wrppmc.o
-+obj-$(CONFIG_MIKROTIK_RB500) += pci-rc32434.o ops-rc32434.o fixup-rb500.o
---- a/drivers/pci/Makefile
-+++ b/drivers/pci/Makefile
-@@ -35,6 +35,7 @@ obj-$(CONFIG_PPC32) += setup-irq.o
- obj-$(CONFIG_PPC64) += setup-bus.o
- obj-$(CONFIG_MIPS) += setup-bus.o setup-irq.o
- obj-$(CONFIG_X86_VISWS) += setup-irq.o
-+obj-$(CONFIG_MIKROTIK_RB500) += setup-irq.o
-
- #
- # ACPI Related PCI FW Functions
---- a/include/asm-mips/bootinfo.h
-+++ b/include/asm-mips/bootinfo.h
-@@ -198,6 +198,14 @@
- #define MACH_GROUP_BRCM 23 /* Broadcom */
- #define MACH_BCM47XX 1 /* Broadcom BCM47XX */
-
-+
-+/*
-+ * Valid machtype for group Mikrotik
-+ */
-+#define MACH_GROUP_MIKROTIK 29 /* Mikrotik Boards */
-+#define MACH_MIKROTIK_RB532 0 /* Mikrotik RouterBoard 532 */
-+#define MACH_MIKROTIK_RB532A 1 /* Mikrotik RouterBoard 532A */
-+
- #define CL_SIZE COMMAND_LINE_SIZE
-
- const char *get_system_type(void);
---- a/include/asm-mips/cpu.h
-+++ b/include/asm-mips/cpu.h
-@@ -196,7 +196,7 @@ enum cpu_type_enum {
- */
- CPU_4KC, CPU_4KEC, CPU_4KSC, CPU_24K, CPU_34K, CPU_74K, CPU_AU1000,
- CPU_AU1100, CPU_AU1200, CPU_AU1500, CPU_AU1550, CPU_PR4450,
-- CPU_BCM3302, CPU_BCM4710,
-+ CPU_BCM3302, CPU_BCM4710, CPU_RC32300,
-
- /*
- * MIPS64 class processors
+++ /dev/null
---- a/drivers/net/Kconfig
-+++ b/drivers/net/Kconfig
-@@ -362,6 +362,13 @@ config AX88796_93CX6
- help
- Select this if your platform comes with an external 93CX6 eeprom.
-
-+config KORINA
-+ tristate "Korina Local Ethernet support"
-+ depends on NET_ETHERNET && ( IDT_EB434 || MIKROTIK_RB500)
-+ help
-+ IDT RC32434 has one local ethernet port. Say Y here to enable it.
-+ To compile this driver as a module, choose M here.
-+
- config MACE
- tristate "MACE (Power Mac ethernet) support"
- depends on PPC_PMAC && PPC32
---- a/drivers/net/Makefile
-+++ b/drivers/net/Makefile
-@@ -30,6 +30,8 @@ ucc_geth_driver-objs := ucc_geth.o ucc_g
- #
- obj-$(CONFIG_PLIP) += plip.o
-
-+obj-$(CONFIG_KORINA) += korina.o
-+
- obj-$(CONFIG_ROADRUNNER) += rrunner.o
-
- obj-$(CONFIG_HAPPYMEAL) += sunhme.o
+++ /dev/null
---- a/drivers/block/Kconfig
-+++ b/drivers/block/Kconfig
-@@ -408,6 +408,14 @@ config SUNVDC
- Support for virtual disk devices as a client under Sun
- Logical Domains.
-
-+config BLK_DEV_CF_MIPS
-+ bool "CF slot of RB532 board"
-+ depends on MIKROTIK_RB500
-+ default y
-+ help
-+ The Routerboard 532 has a CF slot on it. Enable the special block
-+ device driver for it.
-+
- source "drivers/s390/block/Kconfig"
-
- config XILINX_SYSACE
---- a/drivers/block/Makefile
-+++ b/drivers/block/Makefile
-@@ -21,6 +21,7 @@ obj-$(CONFIG_BLK_DEV_DAC960) += DAC960.o
- obj-$(CONFIG_XILINX_SYSACE) += xsysace.o
- obj-$(CONFIG_CDROM_PKTCDVD) += pktcdvd.o
- obj-$(CONFIG_SUNVDC) += sunvdc.o
-+obj-$(CONFIG_BLK_DEV_CF_MIPS) += rb500/
-
- obj-$(CONFIG_BLK_DEV_UMEM) += umem.o
- obj-$(CONFIG_BLK_DEV_NBD) += nbd.o
+++ /dev/null
---- a/arch/mips/kernel/head.S
-+++ b/arch/mips/kernel/head.S
-@@ -122,6 +122,10 @@
-
- j kernel_entry
- nop
-+
-+EXPORT(_image_cmdline)
-+ .ascii "CMDLINE:"
-+
- #ifndef CONFIG_NO_EXCEPT_FILL
- /*
- * Reserved space for exception handlers.
+++ /dev/null
---- a/arch/mips/pci/pci.c
-+++ b/arch/mips/pci/pci.c
-@@ -64,8 +64,10 @@ pcibios_align_resource(void *data, struc
- /*
- * Put everything into 0x00-0xff region modulo 0x400
- */
-+#ifndef CONFIG_MIKROTIK_RB500
- if (start & 0x300)
- start = (start + 0x3ff) & ~0x3ff;
-+#endif
- } else if (res->flags & IORESOURCE_MEM) {
- /* Make sure we start at our min on all hoses */
- if (start < PCIBIOS_MIN_MEM + hose->mem_resource->start)
+++ /dev/null
---- a/drivers/serial/8250.c
-+++ b/drivers/serial/8250.c
-@@ -433,6 +433,13 @@ serial_out(struct uart_8250_port *up, in
- default:
- outb(value, up->port.iobase + offset);
- }
-+
-+#if defined(CONFIG_IDT_EB434) || defined(CONFIG_MIKROTIK_RB500)
-+ __SLOW_DOWN_IO;
-+ __SLOW_DOWN_IO;
-+ __SLOW_DOWN_IO;
-+ __SLOW_DOWN_IO;
-+#endif
- }
-
- static void
+++ /dev/null
---- a/drivers/net/via-rhine.c
-+++ b/drivers/net/via-rhine.c
-@@ -33,6 +33,8 @@
- #define DRV_VERSION "1.4.3"
- #define DRV_RELDATE "2007-03-06"
-
-+#define PKT_ALIGN 1
-+
-
- /* A few user-configurable values.
- These may be modified when a driver module is loaded. */
-@@ -40,6 +42,7 @@
- static int debug = 1; /* 1 normal messages, 0 quiet .. 7 verbose. */
- static int max_interrupt_work = 20;
-
-+#ifndef PKT_ALIGN
- /* Set the copy breakpoint for the copy-only-tiny-frames scheme.
- Setting to > 1518 effectively disables this feature. */
- #if defined(__alpha__) || defined(__arm__) || defined(__hppa__) \
-@@ -49,6 +52,7 @@ static int rx_copybreak = 1518;
- #else
- static int rx_copybreak;
- #endif
-+#endif /* PKT_ALIGN */
-
- /* Work-around for broken BIOSes: they are unable to get the chip back out of
- power state D3 so PXE booting fails. bootparam(7): via-rhine.avoid_D3=1 */
-@@ -111,6 +115,7 @@ static const int multicast_filter_limit
- #include <asm/io.h>
- #include <asm/irq.h>
- #include <asm/uaccess.h>
-+#include <asm/unaligned.h>
- #include <linux/dmi.h>
-
- /* These identify the driver base version and may not be removed. */
-@@ -130,12 +135,14 @@ MODULE_LICENSE("GPL");
-
- module_param(max_interrupt_work, int, 0);
- module_param(debug, int, 0);
--module_param(rx_copybreak, int, 0);
- module_param(avoid_D3, bool, 0);
- MODULE_PARM_DESC(max_interrupt_work, "VIA Rhine maximum events handled per interrupt");
- MODULE_PARM_DESC(debug, "VIA Rhine debug level (0-7)");
--MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames");
- MODULE_PARM_DESC(avoid_D3, "Avoid power state D3 (work-around for broken BIOSes)");
-+#ifndef PKT_ALIGN
-+module_param(rx_copybreak, int, 0);
-+MODULE_PARM_DESC(rx_copybreak, "VIA Rhine copy breakpoint for copy-only-tiny-frames");
-+#endif
-
- /*
- Theory of Operation
-@@ -922,7 +929,7 @@ static void alloc_rbufs(struct net_devic
-
- /* Fill in the Rx buffers. Handle allocation failure gracefully. */
- for (i = 0; i < RX_RING_SIZE; i++) {
-- struct sk_buff *skb = dev_alloc_skb(rp->rx_buf_sz);
-+ struct sk_buff *skb = dev_alloc_skb(rp->rx_buf_sz + 4);
- rp->rx_skbuff[i] = skb;
- if (skb == NULL)
- break;
-@@ -1485,7 +1492,9 @@ static int rhine_rx(struct net_device *d
- struct sk_buff *skb;
- /* Length should omit the CRC */
- int pkt_len = data_size - 4;
--
-+#ifdef PKT_ALIGN
-+ int i;
-+#else
- /* Check if the packet is long enough to accept without
- copying to a minimally-sized skbuff. */
- if (pkt_len < rx_copybreak &&
-@@ -1504,7 +1513,9 @@ static int rhine_rx(struct net_device *d
- rp->rx_skbuff_dma[entry],
- rp->rx_buf_sz,
- PCI_DMA_FROMDEVICE);
-- } else {
-+ } else
-+#endif
-+ {
- skb = rp->rx_skbuff[entry];
- if (skb == NULL) {
- printk(KERN_ERR "%s: Inconsistent Rx "
-@@ -1518,6 +1529,14 @@ static int rhine_rx(struct net_device *d
- rp->rx_skbuff_dma[entry],
- rp->rx_buf_sz,
- PCI_DMA_FROMDEVICE);
-+#ifdef PKT_ALIGN
-+ /* align the data to the ip header - should be faster than copying the entire packet */
-+ for (i = pkt_len - (pkt_len % 4); i >= 0; i -= 4) {
-+ put_unaligned(*((u32 *) (skb->data + i)), (u32 *) (skb->data + i + 2));
-+ }
-+ skb->data += 2;
-+ skb->tail += 2;
-+#endif
- }
- skb->protocol = eth_type_trans(skb, dev);
- #ifdef CONFIG_VIA_RHINE_NAPI
+++ /dev/null
---- a/drivers/leds/Kconfig
-+++ b/drivers/leds/Kconfig
-@@ -120,6 +120,12 @@ config LEDS_CM_X270
- help
- This option enables support for the CM-X270 LEDs.
-
-+config LEDS_RB500
-+ tristate "LED Support for RB5xx boards"
-+ depends on LEDS_CLASS && MIKROTIK_RB500
-+ help
-+ This option enables support for the yellow user LED on RB5xx boards.
-+
- comment "LED Triggers"
-
- config LEDS_TRIGGERS
---- a/drivers/leds/Makefile
-+++ b/drivers/leds/Makefile
-@@ -20,6 +20,7 @@ obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-
- obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
- obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
- obj-$(CONFIG_LEDS_CM_X270) += leds-cm-x270.o
-+obj-$(CONFIG_LEDS_RB500) += leds-rb500.o
-
- # LED Triggers
- obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
+++ /dev/null
---- a/arch/mips/kernel/time.c
-+++ b/arch/mips/kernel/time.c
-@@ -75,6 +75,7 @@ EXPORT_SYMBOL(perf_irq);
- */
-
- unsigned int mips_hpt_frequency;
-+EXPORT_SYMBOL(mips_hpt_frequency);
-
- void __init clocksource_set_clock(struct clocksource *cs, unsigned int clock)
- {
---- a/drivers/watchdog/Kconfig
-+++ b/drivers/watchdog/Kconfig
-@@ -639,6 +639,18 @@ config AR7_WDT
- help
- Hardware driver for the TI AR7 Watchdog Timer.
-
-+config RC32434_WDT
-+ tristate "IDT Interprise 79RC32434 SoC hardware watchdog"
-+ depends on WATCHDOG && MIKROTIK_RB500
-+ help
-+ This is a driver for hardware watchdog integrated in IDT Interprise
-+ 79RC32434 SoC. This watchdog simply watches your kernel to make sure
-+ it doesn't freeze, and if it does, it reboots your computer after a
-+ certain amount of time.
-+
-+ To compile this driver as a module, choose M here: the module will be
-+ called rc32434_wdt.
-+
- # PARISC Architecture
-
- # POWERPC Architecture
+++ /dev/null
---- a/arch/mips/lib/iomap-pci.c
-+++ b/arch/mips/lib/iomap-pci.c
-@@ -32,7 +32,7 @@ static void __iomem *ioport_map_pci(stru
- "report it to linux-mips@linux-mips.org or your "
- "vendor.\n", name);
- #ifdef CONFIG_PCI_DOMAINS
-- panic("To avoid data corruption io_map_base MUST be set with "
-+ printk(KERN_WARNING "To avoid data corruption io_map_base MUST be set with "
- "multiple PCI domains.");
- #endif
- }
projects / openwrt.git / commitdiff