[lantiq] gigaset 76x
authorblogic <blogic@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Tue, 17 Jan 2012 12:10:35 +0000 (12:10 +0000)
committerblogic <blogic@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Tue, 17 Jan 2012 12:10:35 +0000 (12:10 +0000)
* fixes leds
* adds all leds found on the sx763 board
* removes board_config from flash layout because wireless data is stored in kernel (ath5k)
* fix button handling

Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29763 3c298f89-4303-0410-b956-a3cf2f4a3e73

target/linux/lantiq/base-files/etc/uci-defaults/leds
target/linux/lantiq/files-3.1/arch/mips/lantiq/xway/mach-gigasx76x.c

index 1de8c36..411e9d8 100755 (executable)
@@ -95,6 +95,8 @@ GIGASX76X)
        set_led_wlan "wifi" "wifi" "soc:green:wifi" "phy0radio"
        set_led_netdev "online" "online" "soc:green:online" "nas0"
        set_led_usbdev "usb" "USB" "soc:green:usb" "1-1"
+       set_led_default "adsl" "adsl" "soc:green:adsl" "0"
+       set_led_default "voip" "voip" "soc:green:voip" "0"
        set_led_default "phone1" "fxs1" "soc:green:phone1" "0"
        set_led_default "phone2" "fxs2" "soc:green:phone2" "0"
        set_led_default "line" "line" "soc:green:line" "0"
index 5256fdd..3dbfcb9 100644 (file)
@@ -54,25 +54,20 @@ static struct mtd_partition gigasx76x_partitions[] =
        {
                .name   = "linux",
                .offset = 0x020000,
-               .size   = 0x7d0000,
-       },
-       {
-               .name   = "board_config",
-               .offset = 0x7f0000,
-               .size   = 0x010000,
+               .size   = 0x7e0000,
        },
 };
 
 static struct gpio_led
 gigasx76x_gpio_leds[] __initdata = {
-
-       { .name = "soc:green:usb", .gpio = 202, },
-       { .name = "soc:green:wifi", .gpio = 203, },
-       { .name = "soc:green:phone2", .gpio = 204, },
-       { .name = "soc:green:phone1", .gpio = 205, },
-       { .name = "soc:green:line", .gpio = 206, },
-       { .name = "soc:green:online", .gpio = 207, },
-       { .name = "soc:green:voip", .gpio = 208, },
+       { .name = "soc:green:voip", .gpio = 216, },
+       { .name = "soc:green:adsl", .gpio = 217, },
+       { .name = "soc:green:usb", .gpio = 218, },
+       { .name = "soc:green:wifi", .gpio = 219, },
+       { .name = "soc:green:phone2", .gpio = 220, },
+       { .name = "soc:green:phone1", .gpio = 221, },
+       { .name = "soc:green:line", .gpio = 222, },
+       { .name = "soc:green:online", .gpio = 223, },
 };
 
 static struct gpio_keys_button
@@ -80,19 +75,19 @@ gigasx76x_gpio_keys[] __initdata = {
        {
                .desc           = "wps",
                .type           = EV_KEY,
-               .code           = BTN_0,
+               .code           = KEY_WPS_BUTTON,
                .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
                .gpio           = 22,
                .active_low     = 1,
        },
-       /*{
-               .desc           = "factory",
+       {
+               .desc           = "reset",
                .type           = EV_KEY,
-               .code           = BTN_1,
+               .code           = BTN_0,
                .debounce_interval = LTQ_KEYS_DEBOUNCE_INTERVAL,
                .gpio           = 14,
-               .active_low     = 1,
-       },*/
+               .active_low     = 0,
+       },
 };
 
 static struct physmap_flash_data gigasx76x_flash_data = {
@@ -228,7 +223,6 @@ static void __init gigasx76x_init(void) {
        ltq_register_nor(&gigasx76x_flash_data);
        ltq_register_pci(&ltq_pci_data);
        ltq_register_tapi();
-       ltq_register_madwifi_eep(GIGASX76X_MADWIFI_ADDR);
        ltq_add_device_gpio_leds(-1, ARRAY_SIZE(gigasx76x_gpio_leds), gigasx76x_gpio_leds);
        ltq_register_gpio_keys_polled(-1, LTQ_KEYS_POLL_INTERVAL, ARRAY_SIZE(gigasx76x_gpio_keys), gigasx76x_gpio_keys);
        ltq_register_ath5k(gigasx76x_ath5k_eeprom_data, gigasx76x_ath5k_eeprom_mac);
This page took 0.026873 seconds and 4 git commands to generate.