ar71xx: add missing files for the JA76PF board

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@24444 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/ar71xx/base-files/etc/defconfig/ja76pf/network b/target/linux/ar71xx/base-files/etc/defconfig/ja76pf/network
new file mode 100644 (file)
index 0000000..b60053f
--- /dev/null
+++ b/target/linux/ar71xx/base-files/etc/defconfig/ja76pf/network
@@ -0,0 +1,26 @@
+config interface loopback
+       option ifname   lo
+       option proto    static
+       option ipaddr   127.0.0.1
+       option netmask  255.0.0.0
+
+config interface lan
+       option ifname   eth0
+       option type     bridge
+       option proto    static
+       option ipaddr   192.168.1.1
+       option netmask  255.255.255.0
+
+config interface wan
+       option ifname   eth1
+       option proto    dhcp
+
+config switch
+       option name     eth0
+       option reset    1
+       option enable_vlan      1
+
+config switch_vlan
+       option device   eth0
+       option vlan     1
+       option ports    "0 1 2 3 4"

diff --git a/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ja76pf.c b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ja76pf.c
new file mode 100644 (file)
index 0000000..d39de3c
--- /dev/null
+++ b/target/linux/ar71xx/files/arch/mips/ar71xx/mach-ja76pf.c
@@ -0,0 +1,96 @@
+/*
+ *  jjPlus JA76PF board support
+ */
+
+#include <asm/mach-ar71xx/ar71xx.h>
+#include <linux/platform_device.h>
+#include <linux/i2c.h>
+#include <linux/i2c-gpio.h>
+
+#include "machtype.h"
+#include "devices.h"
+#include "dev-m25p80.h"
+#include "dev-gpio-buttons.h"
+#include "dev-pb42-pci.h"
+#include "dev-usb.h"
+#include "dev-leds-gpio.h"
+
+#define JA76PF_BUTTONS_POLL_INTERVAL   20
+
+#define JA76PF_GPIO_I2C_SCL            0
+#define JA76PF_GPIO_I2C_SDA            1
+#define JA76PF_GPIO_LED_1              5
+#define JA76PF_GPIO_LED_2              4
+#define JA76PF_GPIO_BTN_RESET          11
+
+static struct gpio_led ja76pf_leds_gpio[] __initdata = {
+       {
+               .name           = "ja76pf:green:led1",
+               .gpio           = JA76PF_GPIO_LED_1,
+               .active_low     = 1,
+       }, {
+               .name           = "ja76pf:green:led2",
+               .gpio           = JA76PF_GPIO_LED_2,
+               .active_low     = 1,
+       }
+};
+
+static struct gpio_button ja76pf_gpio_buttons[] __initdata = {
+       {
+               .desc           = "reset",
+               .type           = EV_KEY,
+               .code           = KEY_RESTART,
+               .threshold      = 3,
+               .gpio           = JA76PF_GPIO_BTN_RESET,
+               .active_low     = 1,
+       }
+};
+
+static struct i2c_gpio_platform_data ja76pf_i2c_gpio_data = {
+       .sda_pin        = JA76PF_GPIO_I2C_SDA,
+       .scl_pin        = JA76PF_GPIO_I2C_SCL,
+};
+
+static struct platform_device ja76pf_i2c_gpio_device = {
+       .name           = "i2c-gpio",
+       .id             = 0,
+       .dev = {
+               .platform_data  = &ja76pf_i2c_gpio_data,
+       }
+};
+
+#define JA76PF_WAN_PHYMASK     (1 << 4)
+#define JA76PF_LAN_PHYMASK     ((1 << 0) | (1 << 1) | (1 << 2) | (1 < 3))
+#define JA76PF_MDIO_PHYMASK    (JA76PF_LAN_PHYMASK | JA76PF_WAN_PHYMASK)
+
+static void __init ja76pf_init(void)
+{
+       ar71xx_add_device_m25p80(NULL);
+
+       ar71xx_add_device_mdio(~JA76PF_MDIO_PHYMASK);
+
+       ar71xx_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+       ar71xx_eth0_data.phy_mask = JA76PF_LAN_PHYMASK;
+
+       ar71xx_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_RGMII;
+       ar71xx_eth1_data.phy_mask = JA76PF_WAN_PHYMASK;
+       ar71xx_eth1_data.speed = SPEED_1000;
+       ar71xx_eth1_data.duplex = DUPLEX_FULL;
+
+       ar71xx_add_device_eth(0);
+       ar71xx_add_device_eth(1);
+
+       platform_device_register(&ja76pf_i2c_gpio_device);
+
+       ar71xx_add_device_leds_gpio(-1, ARRAY_SIZE(ja76pf_leds_gpio),
+                                       ja76pf_leds_gpio);
+
+       ar71xx_add_device_gpio_buttons(-1, JA76PF_BUTTONS_POLL_INTERVAL,
+                                       ARRAY_SIZE(ja76pf_gpio_buttons),
+                                       ja76pf_gpio_buttons);
+
+       ar71xx_add_device_usb();
+       pb42_pci_init();
+}
+
+MIPS_MACHINE(AR71XX_MACH_JA76PF, "JA76PF", "jjPlus JA76PF", ja76pf_init);