[brcm63xx] add support for D-Link DVA-G3810BN/TL

This patch adds support for D-Link's DVA-G3810BN/TL product.

Signed-off-by: Roman Dumycz <roman@secureas.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@26956 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/brcm63xx/base-files/etc/defconfig/DVAG3810BN/network b/target/linux/brcm63xx/base-files/etc/defconfig/DVAG3810BN/network
new file mode 100644 (file)
index 0000000..181ca01
--- /dev/null
+++ b/target/linux/brcm63xx/base-files/etc/defconfig/DVAG3810BN/network
@@ -0,0 +1,29 @@
+# Copyright (C) 2008 OpenWrt.org
+
+config interface loopback
+        option ifname   lo
+        option proto    static
+        option ipaddr   127.0.0.1
+        option netmask  255.0.0.0
+
+config interface lan
+        option type     bridge
+        option ifname   eth1.1
+        option proto    static
+        option ipaddr   192.168.1.1
+        option netmask  255.255.255.0
+        option nat      1
+
+config interface wan
+       option ifname   eth0
+       option proto    dhcp
+
+config switch  eth1
+       option  enable  1
+       option  enable_vlan 1
+       option  reset   1
+
+config switch_vlan
+       option  vlan    1
+       option  device  eth1
+       option  ports   "0 1 2 3 5t"

diff --git a/target/linux/brcm63xx/base-files/etc/init.d/defconfig b/target/linux/brcm63xx/base-files/etc/init.d/defconfig
index dac9c23..8fd783d 100755 (executable)
--- a/target/linux/brcm63xx/base-files/etc/init.d/defconfig
+++ b/target/linux/brcm63xx/base-files/etc/init.d/defconfig
@@ -8,6 +8,10 @@ START=05
 start() {
        local board=$(awk 'BEGIN{FS="[ \t:/]+"} /system type/ {print $4}' /proc/cpuinfo)
 
+       if [ "$board" = "96358VW" ] && [ -e /proc/switch/eth1/enable ]; then
+               board="DVAG3810BN"
+       fi
+
        [ ! -d /etc/defconfig/$board ] && board="generic"
 
        for f in $( ls /etc/defconfig/$board ); do

diff --git a/target/linux/brcm63xx/image/Makefile b/target/linux/brcm63xx/image/Makefile
index bf292de..f1fa4f5 100644 (file)
--- a/target/linux/brcm63xx/image/Makefile
+++ b/target/linux/brcm63xx/image/Makefile
@@ -195,6 +195,8 @@ define Image/Build
        $(call Image/Build/CFEFIXUP,$(1),96358GW,AW4139,6358,DSL274XB-C2)
        # D-Link DSL-2740B/DSL-2741B, rev C3
        $(call Image/Build/CFE,$(1),AW4139,6358,DSL274XB-C3)
+       # D-Link DVA-G3810BN/TL
+       $(call Image/Build/CFE,$(1),96358GW,6358,DVAG3810BN)
 
        # TP-Link TD-8810A, TD-8810B, TD-8811A, TD-8811B
        $(call Image/Build/CFE,$(1),8L-2M-8M,6338,TP8810_8811)