-/*
- * ar2313.c: Linux driver for the Atheros AR2313 Ethernet device.
- *
- * Copyright 2004 by Sameer Dekate, <sdekate@arubanetworks.com>.
- * Copyright (C) 2006 Imre Kaloz <kaloz@openwrt.org>
- *
- * Thanks to Atheros for providing hardware and documentation
- * enabling me to write this driver.
- *
- * This program is free software; you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation; either version 2 of the License, or
- * (at your option) any later version.
- *
- * Additional credits:
- * This code is taken from John Taylor's Sibyte driver and then
- * modified for the AR2313.
- */
-
-#include <linux/autoconf.h>
-#include <linux/module.h>
-#include <linux/version.h>
-#include <linux/types.h>
-#include <linux/errno.h>
-#include <linux/ioport.h>
-#include <linux/pci.h>
-#include <linux/netdevice.h>
-#include <linux/etherdevice.h>
-#include <linux/skbuff.h>
-#include <linux/init.h>
-#include <linux/delay.h>
-#include <linux/mm.h>
-#include <linux/highmem.h>
-#include <linux/sockios.h>
-#include <linux/pkt_sched.h>
-#include <linux/compile.h>
-#include <linux/mii.h>
-#include <linux/ethtool.h>
-#include <linux/ctype.h>
-
-#include <net/sock.h>
-#include <net/ip.h>
-
-#include <asm/system.h>
-#include <asm/io.h>
-#include <asm/irq.h>
-#include <asm/byteorder.h>
-#include <asm/uaccess.h>
-#include <asm/bootinfo.h>
-
-extern char *getenv(char *e);
-
-
-#undef INDEX_DEBUG
-#define DEBUG 0
-#define DEBUG_TX 0
-#define DEBUG_RX 0
-#define DEBUG_INT 0
-#define DEBUG_MC 0
-#define DEBUG_ERR 1
-
-#ifndef __exit
-#define __exit
-#endif
-
-#ifndef min
-#define min(a,b) (((a)<(b))?(a):(b))
-#endif
-
-#ifndef SMP_CACHE_BYTES
-#define SMP_CACHE_BYTES L1_CACHE_BYTES
-#endif
-
-#ifndef SET_MODULE_OWNER
-#define SET_MODULE_OWNER(dev) {do{} while(0);}
-#define AR2313_MOD_INC_USE_COUNT MOD_INC_USE_COUNT
-#define AR2313_MOD_DEC_USE_COUNT MOD_DEC_USE_COUNT
-#else
-#define AR2313_MOD_INC_USE_COUNT {do{} while(0);}
-#define AR2313_MOD_DEC_USE_COUNT {do{} while(0);}
-#endif
-
-#define PHYSADDR(a) ((_ACAST32_ (a)) & 0x1fffffff)
-
-static char ethaddr[18] = "00:00:00:00:00:00";
-static char ifname[5] = "bond";
-
-#if LINUX_VERSION_CODE >= KERNEL_VERSION(2,5,52)
-module_param_string(ethaddr, ethaddr, 18, 0);
-module_param_string(ifname, ifname, 5, 0);
-#else
-MODULE_PARM(ethaddr, "c18");
-MODULE_PARM(ifname, "c5");
-#endif
-
-#define AR2313_MBOX_SET_BIT 0x8
-
-#define BOARD_IDX_STATIC 0
-#define BOARD_IDX_OVERFLOW -1
-
-/* margot includes */
-#include <asm/idt-boards/rc32434/rc32434.h>
-
-#include "ar2313_msg.h"
-#include "platform.h"
-#include "dma.h"
-#include "ar2313.h"
-
-/*
- * New interrupt handler strategy:
- *
- * An old interrupt handler worked using the traditional method of
- * replacing an skbuff with a new one when a packet arrives. However
- * the rx rings do not need to contain a static number of buffer
- * descriptors, thus it makes sense to move the memory allocation out
- * of the main interrupt handler and do it in a bottom half handler
- * and only allocate new buffers when the number of buffers in the
- * ring is below a certain threshold. In order to avoid starving the
- * NIC under heavy load it is however necessary to force allocation
- * when hitting a minimum threshold. The strategy for alloction is as
- * follows:
- *
- * RX_LOW_BUF_THRES - allocate buffers in the bottom half
- * RX_PANIC_LOW_THRES - we are very low on buffers, allocate
- * the buffers in the interrupt handler
- * RX_RING_THRES - maximum number of buffers in the rx ring
- *
- * One advantagous side effect of this allocation approach is that the
- * entire rx processing can be done without holding any spin lock
- * since the rx rings and registers are totally independent of the tx
- * ring and its registers. This of course includes the kmalloc's of
- * new skb's. Thus start_xmit can run in parallel with rx processing
- * and the memory allocation on SMP systems.
- *
- * Note that running the skb reallocation in a bottom half opens up
- * another can of races which needs to be handled properly. In
- * particular it can happen that the interrupt handler tries to run
- * the reallocation while the bottom half is either running on another
- * CPU or was interrupted on the same CPU. To get around this the
- * driver uses bitops to prevent the reallocation routines from being
- * reentered.
- *
- * TX handling can also be done without holding any spin lock, wheee
- * this is fun! since tx_csm is only written to by the interrupt
- * handler.
- */
-
-/*
- * Threshold values for RX buffer allocation - the low water marks for
- * when to start refilling the rings are set to 75% of the ring
- * sizes. It seems to make sense to refill the rings entirely from the
- * intrrupt handler once it gets below the panic threshold, that way
- * we don't risk that the refilling is moved to another CPU when the
- * one running the interrupt handler just got the slab code hot in its
- * cache.
- */
-#define RX_RING_SIZE AR2313_DESCR_ENTRIES
-#define RX_PANIC_THRES (RX_RING_SIZE/4)
-#define RX_LOW_THRES ((3*RX_RING_SIZE)/4)
-#define CRC_LEN 4
-#define RX_OFFSET 2
-
-#define AR2313_BUFSIZE (AR2313_MTU + ETH_HLEN + CRC_LEN + RX_OFFSET)
-
-#ifdef MODULE
-MODULE_AUTHOR("Sameer Dekate<sdekate@arubanetworks.com>");
-MODULE_DESCRIPTION("AR2313 Ethernet driver");
-#endif
-
-#if DEBUG
-static char version[] __initdata =
- "ar2313.c: v0.02 2006/06/19 sdekate@arubanetworks.com\n";
-#endif /* DEBUG */
-
-#define virt_to_phys(x) ((u32)(x) & 0x1fffffff)
-
-// prototypes
-static short armiiread(short phy, short reg);
-static void armiiwrite(short phy, short reg, short data);
-#ifdef TX_TIMEOUT
-static void ar2313_tx_timeout(struct net_device *dev);
-#endif
-static void ar2313_halt(struct net_device *dev);
-static void rx_tasklet_func(unsigned long data);
-static void ar2313_multicast_list(struct net_device *dev);
-
-static struct net_device *root_dev;
-static int probed __initdata = 0;
-static unsigned long ar_eth_base;
-static unsigned long ar_dma_base;
-static unsigned long ar_int_base;
-static unsigned long ar_int_mac_mask;
-static unsigned long ar_int_phy_mask;
-
-#ifndef ERR
-#define ERR(fmt, args...) printk("%s: " fmt, __func__, ##args)
-#endif
-
-static int parse_mac_addr(struct net_device *dev, char* macstr){
- int i, j;
- unsigned char result, value;
-
- for (i=0; i<6; i++) {
- result = 0;
- if (i != 5 && *(macstr+2) != ':') {
- ERR("invalid mac address format: %d %c\n",
- i, *(macstr+2));
- return -EINVAL;
- }
- for (j=0; j<2; j++) {
- if (isxdigit(*macstr) && (value = isdigit(*macstr) ? *macstr-'0' :
- toupper(*macstr)-'A'+10) < 16)
- {
- result = result*16 + value;
- macstr++;
- }
- else {
- ERR("invalid mac address "
- "character: %c\n", *macstr);
- return -EINVAL;
- }
- }
-
- macstr++;
- dev->dev_addr[i] = result;
- }
-
- return 0;
-}
-
-
-int __init ar2313_probe(void)
-{
- struct net_device *dev;
- struct ar2313_private *sp;
- int version_disp;
- char name[64] ;
-
- if (probed)
- return -ENODEV;
- probed++;
-
- version_disp = 0;
- sprintf(name, "%s%%d", ifname) ;
- dev = alloc_etherdev(sizeof(struct ar2313_private));
-
- if (dev == NULL) {
- printk(KERN_ERR "ar2313: Unable to allocate net_device structure!\n");
- return -ENOMEM;
- }
-
- SET_MODULE_OWNER(dev);
-
- sp = dev->priv;
-
- sp->link = 0;
- switch (mips_machtype) {
- case MACH_ARUBA_AP60:
- ar_eth_base = 0xb8100000;
- ar_dma_base = ar_eth_base + 0x1000;
- ar_int_base = 0x1C003020;
- ar_int_mac_mask = RESET_ENET0|RESET_ENET1;
- ar_int_phy_mask = RESET_EPHY0|RESET_EPHY1;
- sp->mac = 1;
- sp->phy = 1;
- dev->irq = 4;
- break;
-
- case MACH_ARUBA_AP40:
- ar_eth_base = 0xb0500000;
- ar_dma_base = ar_eth_base + 0x1000;
- ar_int_base = 0x11000004;
- ar_int_mac_mask = 0x800;
- ar_int_phy_mask = 0x400;
- sp->mac = 0;
- sp->phy = 1;
- dev->irq = 4;
- break;
-
- case MACH_ARUBA_AP65:
- ar_eth_base = 0xb8100000;
- ar_dma_base = ar_eth_base + 0x1000;
- ar_int_base = 0x1C003020;
- ar_int_mac_mask = RESET_ENET0|RESET_ENET1;
- ar_int_phy_mask = RESET_EPHY0|RESET_EPHY1;
- sp->mac = 0;
-#if 0
- // commented out, for now
-
- if (mips_machtype == MACH_ARUBA_SAMSUNG) {
- sp->phy = 0x1f;
- } else {
- sp->phy = 1;
- }
-#else
- sp->phy = 1;
-#endif
- dev->irq = 3;
- break;
-
- default:
- printk("%s: unsupported mips_machtype=0x%lx\n",
- __FUNCTION__, mips_machtype) ;
- return -ENODEV;
- }
-
- spin_lock_init(&sp->lock);
-
- /* initialize func pointers */
- dev->open = &ar2313_open;
- dev->stop = &ar2313_close;
- dev->hard_start_xmit = &ar2313_start_xmit;
-
- dev->get_stats = &ar2313_get_stats;
- dev->set_multicast_list = &ar2313_multicast_list;
-#ifdef TX_TIMEOUT
- dev->tx_timeout = ar2313_tx_timeout;
- dev->watchdog_timeo = AR2313_TX_TIMEOUT;
-#endif
- dev->do_ioctl = &ar2313_ioctl;
-
- // SAMEER: do we need this?
- dev->features |= NETIF_F_SG | NETIF_F_HIGHDMA;
-
- tasklet_init(&sp->rx_tasklet, rx_tasklet_func, (unsigned long) dev);
- tasklet_disable(&sp->rx_tasklet);
-
- /* display version info if adapter is found */
- if (!version_disp) {
- /* set display flag to TRUE so that */
- /* we only display this string ONCE */
- version_disp = 1;
-#if DEBUG
- printk(version);
-#endif /* DEBUG */
- }
-
- request_region(PHYSADDR(ETHERNET_BASE), ETHERNET_SIZE*ETHERNET_MACS,
- "AR2313ENET");
-
- sp->eth_regs = ioremap_nocache(PHYSADDR(ETHERNET_BASE + ETHERNET_SIZE*sp->mac),
- sizeof(*sp->eth_regs));
- if (!sp->eth_regs) {
- printk("Can't remap eth registers\n");
- return(-ENXIO);
- }
-
- sp->dma_regs = ioremap_nocache(PHYSADDR(DMA_BASE + DMA_SIZE*sp->mac),
- sizeof(*sp->dma_regs));
- dev->base_addr = (unsigned int) sp->dma_regs;
- if (!sp->dma_regs) {
- printk("Can't remap DMA registers\n");
- return(-ENXIO);
- }
-
- sp->int_regs = ioremap_nocache(PHYSADDR(INTERRUPT_BASE),
- sizeof(*sp->int_regs));
- if (!sp->int_regs) {
- printk("Can't remap INTERRUPT registers\n");
- return(-ENXIO);
- }
-
- strncpy(sp->name, "Atheros AR2313", sizeof (sp->name) - 1);
- sp->name [sizeof (sp->name) - 1] = '\0';
-
- {
- char mac[32];
- extern char *getenv(char *e);
- unsigned char def_mac[6] = {0, 0x0b, 0x86, 0xba, 0xdb, 0xad};
- memset(mac, 0, 32);
- memcpy(mac, getenv("ethaddr"), 17);
- if (parse_mac_addr(dev, mac)){
- printk("%s: MAC address not found, using default\n", __func__);
- memcpy(dev->dev_addr, def_mac, 6);
- }
- }
-
- sp->board_idx = BOARD_IDX_STATIC;
-
- if (ar2313_init(dev)) {
- /*
- * ar2313_init() calls ar2313_init_cleanup() on error.
- */
- kfree(dev);
- return -ENODEV;
- }
-
- if (register_netdev(dev)){
- printk("%s: register_netdev failed\n", __func__);
- return -1;
- }
-
- printk("%s: %s: %02x:%02x:%02x:%02x:%02x:%02x, irq %d\n",
- dev->name, sp->name,
- dev->dev_addr[0], dev->dev_addr[1], dev->dev_addr[2],
- dev->dev_addr[3], dev->dev_addr[4], dev->dev_addr[5],
- dev->irq);
-
- /* start link poll timer */
- ar2313_setup_timer(dev);
-
- /*
- * Register the device
- */
- root_dev = dev;
-
- return 0;
-}
-
-#if 0
-static void ar2313_dump_regs(struct net_device *dev)
-{
- unsigned int *ptr, i;
- struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
-
- ptr = (unsigned int *)sp->eth_regs;
- for(i=0; i< (sizeof(ETHERNET_STRUCT)/ sizeof(unsigned int)); i++, ptr++) {
- printk("ENET: %08x = %08x\n", (int)ptr, *ptr);
- }
-
- ptr = (unsigned int *)sp->dma_regs;
- for(i=0; i< (sizeof(DMA)/ sizeof(unsigned int)); i++, ptr++) {
- printk("DMA: %08x = %08x\n", (int)ptr, *ptr);
- }
-
- ptr = (unsigned int *)sp->int_regs;
- for(i=0; i< (sizeof(INTERRUPT)/ sizeof(unsigned int)); i++, ptr++){
- printk("INT: %08x = %08x\n", (int)ptr, *ptr);
- }
-
- for (i = 0; i < AR2313_DESCR_ENTRIES; i++) {
- ar2313_descr_t *td = &sp->tx_ring[i];
- printk("Tx desc %2d: %08x %08x %08x %08x\n", i,
- td->status, td->devcs, td->addr, td->descr);
- }
-}
-#endif
-
-#ifdef TX_TIMEOUT
-static void
-ar2313_tx_timeout(struct net_device *dev)
-{
- struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
- unsigned long flags;
-
-#if DEBUG_TX
- printk("Tx timeout\n");
-#endif
- spin_lock_irqsave(&sp->lock, flags);
- ar2313_restart(dev);
- spin_unlock_irqrestore(&sp->lock, flags);
-}
-#endif
-
-#if DEBUG_MC
-static void
-printMcList(struct net_device *dev)
-{
- struct dev_mc_list *list = dev->mc_list;
- int num=0, i;
- while(list){
- printk("%d MC ADDR ", num);
- for(i=0;i<list->dmi_addrlen;i++) {
- printk(":%02x", list->dmi_addr[i]);
- }
- list = list->next;
- printk("\n");
- }
-}
-#endif
-
-/*
- * Set or clear the multicast filter for this adaptor.
- * THIS IS ABSOLUTE CRAP, disabled
- */
-static void
-ar2313_multicast_list(struct net_device *dev)
-{
- /*
- * Always listen to broadcasts and
- * treat IFF bits independently
- */
- struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
- unsigned int recognise;
-
- recognise = sp->eth_regs->mac_control;
-
- if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
- recognise |= MAC_CONTROL_PR;
- } else {
- recognise &= ~MAC_CONTROL_PR;
- }
-
- if ((dev->flags & IFF_ALLMULTI) || (dev->mc_count > 15)) {
-#if DEBUG_MC
- printMcList(dev);
- printk("%s: all MULTICAST mc_count %d\n", __FUNCTION__, dev->mc_count);
-#endif
- recognise |= MAC_CONTROL_PM;/* all multicast */
- } else if (dev->mc_count > 0) {
-#if DEBUG_MC
- printMcList(dev);
- printk("%s: mc_count %d\n", __FUNCTION__, dev->mc_count);
-#endif
- recognise |= MAC_CONTROL_PM; /* for the time being */
- }
-#if DEBUG_MC
- printk("%s: setting %08x to %08x\n", __FUNCTION__, (int)sp->eth_regs, recognise);
-#endif
-
- sp->eth_regs->mac_control = recognise;
-}
-
-static void rx_tasklet_cleanup(struct net_device *dev)
-{
- struct ar2313_private *sp = dev->priv;
-
- /*
- * Tasklet may be scheduled. Need to get it removed from the list
- * since we're about to free the struct.
- */
-
- sp->unloading = 1;
- tasklet_enable(&sp->rx_tasklet);
- tasklet_kill(&sp->rx_tasklet);
-}
-
-static void __exit ar2313_module_cleanup(void)
-{
- rx_tasklet_cleanup(root_dev);
- ar2313_init_cleanup(root_dev);
- unregister_netdev(root_dev);
- kfree(root_dev);
- release_region(PHYSADDR(ETHERNET_BASE), ETHERNET_SIZE*ETHERNET_MACS);
-}
-
-
-/*
- * Restart the AR2313 ethernet controller.
- */
-static int ar2313_restart(struct net_device *dev)
-{
- /* disable interrupts */
- disable_irq(dev->irq);
-
- /* stop mac */
- ar2313_halt(dev);
-
- /* initialize */
- ar2313_init(dev);
-
- /* enable interrupts */
- enable_irq(dev->irq);
-
- return 0;
-}
-
-extern unsigned long mips_machtype;
-
-int __init ar2313_module_init(void)
-{
- int status=-1;
- switch (mips_machtype){
- case MACH_ARUBA_AP60:
- case MACH_ARUBA_AP65:
- case MACH_ARUBA_AP40:
- root_dev = NULL;
- status = ar2313_probe();
- break;
- }
- return status;
-}
-
-
-module_init(ar2313_module_init);
-module_exit(ar2313_module_cleanup);
-
-
-static void ar2313_free_descriptors(struct net_device *dev)
-{
- struct ar2313_private *sp = dev->priv;
- if (sp->rx_ring != NULL) {
- kfree((void*)KSEG0ADDR(sp->rx_ring));
- sp->rx_ring = NULL;
- sp->tx_ring = NULL;
- }
-}
-
-
-static int ar2313_allocate_descriptors(struct net_device *dev)
-{
- struct ar2313_private *sp = dev->priv;
- int size;
- int j;
- ar2313_descr_t *space;
-
- if(sp->rx_ring != NULL){
- printk("%s: already done.\n", __FUNCTION__);
- return 0;
- }
-
- size = (sizeof(ar2313_descr_t) * (AR2313_DESCR_ENTRIES * AR2313_QUEUES));
- space = kmalloc(size, GFP_KERNEL);
- if (space == NULL)
- return 1;
-
- /* invalidate caches */
- dma_cache_inv((unsigned int)space, size);
-
- /* now convert pointer to KSEG1 */
- space = (ar2313_descr_t *)KSEG1ADDR(space);
-
- memset((void *)space, 0, size);
-
- sp->rx_ring = space;
- space += AR2313_DESCR_ENTRIES;
-
- sp->tx_ring = space;
- space += AR2313_DESCR_ENTRIES;
-
- /* Initialize the transmit Descriptors */
- for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
- ar2313_descr_t *td = &sp->tx_ring[j];
- td->status = 0;
- td->devcs = DMA_TX1_CHAINED;
- td->addr = 0;
- td->descr = K1_TO_PHYS(&sp->tx_ring[(j+1) & (AR2313_DESCR_ENTRIES-1)]);
- }
-
- return 0;
-}
-
-
-/*
- * Generic cleanup handling data allocated during init. Used when the
- * module is unloaded or if an error occurs during initialization
- */
-static void ar2313_init_cleanup(struct net_device *dev)
-{
- struct ar2313_private *sp = dev->priv;
- struct sk_buff *skb;
- int j;
-
- ar2313_free_descriptors(dev);
-
- if (sp->eth_regs) iounmap((void*)sp->eth_regs);
- if (sp->dma_regs) iounmap((void*)sp->dma_regs);
-
- if (sp->rx_skb) {
- for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
- skb = sp->rx_skb[j];
- if (skb) {
- sp->rx_skb[j] = NULL;
- dev_kfree_skb(skb);
- }
- }
- kfree(sp->rx_skb);
- sp->rx_skb = NULL;
- }
-
- if (sp->tx_skb) {
- for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
- skb = sp->tx_skb[j];
- if (skb) {
- sp->tx_skb[j] = NULL;
- dev_kfree_skb(skb);
- }
- }
- kfree(sp->tx_skb);
- sp->tx_skb = NULL;
- }
-}
-
-static int ar2313_setup_timer(struct net_device *dev)
-{
- struct ar2313_private *sp = dev->priv;
-
- init_timer(&sp->link_timer);
-
- sp->link_timer.function = ar2313_link_timer_fn;
- sp->link_timer.data = (int) dev;
- sp->link_timer.expires = jiffies + HZ;
-
- add_timer(&sp->link_timer);
- return 0;
-
-}
-
-static void ar2313_link_timer_fn(unsigned long data)
-{
- struct net_device *dev = (struct net_device *) data;
- struct ar2313_private *sp = dev->priv;
-
- // see if the link status changed
- // This was needed to make sure we set the PHY to the
- // autonegotiated value of half or full duplex.
- ar2313_check_link(dev);
-
- // Loop faster when we don't have link.
- // This was needed to speed up the AP bootstrap time.
- if(sp->link == 0) {
- mod_timer(&sp->link_timer, jiffies + HZ/2);
- } else {
- mod_timer(&sp->link_timer, jiffies + LINK_TIMER);
- }
-}
-
-static void ar2313_check_link(struct net_device *dev)
-{
- struct ar2313_private *sp = dev->priv;
- u16 phyData;
-
- phyData = armiiread(sp->phy, MII_BMSR);
- if (sp->phyData != phyData) {
- if (phyData & BMSR_LSTATUS) {
- /* link is present, ready link partner ability to deterine duplexity */
- int duplex = 0;
- u16 reg;
-
- sp->link = 1;
- reg = armiiread(sp->phy, MII_BMCR);
- if (reg & BMCR_ANENABLE) {
- /* auto neg enabled */
- reg = armiiread(sp->phy, MII_LPA);
- duplex = (reg & (LPA_100FULL|LPA_10FULL))? 1:0;
- } else {
- /* no auto neg, just read duplex config */
- duplex = (reg & BMCR_FULLDPLX)? 1:0;
- }
-
- printk(KERN_INFO "%s: Configuring MAC for %s duplex\n", dev->name,
- (duplex)? "full":"half");
-
- if (duplex) {
- /* full duplex */
- sp->eth_regs->mac_control = ((sp->eth_regs->mac_control | MAC_CONTROL_F) &
- ~MAC_CONTROL_DRO);
- } else {
- /* half duplex */
- sp->eth_regs->mac_control = ((sp->eth_regs->mac_control | MAC_CONTROL_DRO) &
- ~MAC_CONTROL_F);
- }
- } else {
- /* no link */
- sp->link = 0;
- }
- sp->phyData = phyData;
- }
-}
-
-static int
-ar2313_reset_reg(struct net_device *dev)
-{
- struct ar2313_private *sp = (struct ar2313_private *)dev->priv;
- unsigned int ethsal, ethsah;
- unsigned int flags;
-
- *sp->int_regs |= ar_int_mac_mask;
- mdelay(10);
- *sp->int_regs &= ~ar_int_mac_mask;
- mdelay(10);
- *sp->int_regs |= ar_int_phy_mask;
- mdelay(10);
- *sp->int_regs &= ~ar_int_phy_mask;
- mdelay(10);
-
- sp->dma_regs->bus_mode = (DMA_BUS_MODE_SWR);
- mdelay(10);
- sp->dma_regs->bus_mode = ((32 << DMA_BUS_MODE_PBL_SHIFT) | DMA_BUS_MODE_BLE);
-
- /* enable interrupts */
- sp->dma_regs->intr_ena = (DMA_STATUS_AIS |
- DMA_STATUS_NIS |
- DMA_STATUS_RI |
- DMA_STATUS_TI |
- DMA_STATUS_FBE);
- sp->dma_regs->xmt_base = K1_TO_PHYS(sp->tx_ring);
- sp->dma_regs->rcv_base = K1_TO_PHYS(sp->rx_ring);
- sp->dma_regs->control = (DMA_CONTROL_SR | DMA_CONTROL_ST | DMA_CONTROL_SF);
-
- sp->eth_regs->flow_control = (FLOW_CONTROL_FCE);
- sp->eth_regs->vlan_tag = (0x8100);
-
- /* Enable Ethernet Interface */
- flags = (MAC_CONTROL_TE | /* transmit enable */
- MAC_CONTROL_PM | /* pass mcast */
- MAC_CONTROL_F | /* full duplex */
- MAC_CONTROL_HBD); /* heart beat disabled */
-
- if (dev->flags & IFF_PROMISC) { /* set promiscuous mode */
- flags |= MAC_CONTROL_PR;
- }
- sp->eth_regs->mac_control = flags;
-
- /* Set all Ethernet station address registers to their initial values */
- ethsah = ((((u_int)(dev->dev_addr[5]) << 8) & (u_int)0x0000FF00) |
- (((u_int)(dev->dev_addr[4]) << 0) & (u_int)0x000000FF));
-
- ethsal = ((((u_int)(dev->dev_addr[3]) << 24) & (u_int)0xFF000000) |
- (((u_int)(dev->dev_addr[2]) << 16) & (u_int)0x00FF0000) |
- (((u_int)(dev->dev_addr[1]) << 8) & (u_int)0x0000FF00) |
- (((u_int)(dev->dev_addr[0]) << 0) & (u_int)0x000000FF) );
-
- sp->eth_regs->mac_addr[0] = ethsah;
- sp->eth_regs->mac_addr[1] = ethsal;
-
- mdelay(10);
-
- return(0);
-}
-
-
-static int ar2313_init(struct net_device *dev)
-{
- struct ar2313_private *sp = dev->priv;
- int ecode=0;
-
- /*
- * Allocate descriptors
- */
- if (ar2313_allocate_descriptors(dev)) {
- printk("%s: %s: ar2313_allocate_descriptors failed\n",
- dev->name, __FUNCTION__);
- ecode = -EAGAIN;
- goto init_error;
- }
-
- /*
- * Get the memory for the skb rings.
- */
- if(sp->rx_skb == NULL) {
- sp->rx_skb = kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, GFP_KERNEL);
- if (!(sp->rx_skb)) {
- printk("%s: %s: rx_skb kmalloc failed\n",
- dev->name, __FUNCTION__);
- ecode = -EAGAIN;
- goto init_error;
- }
- }
- memset(sp->rx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
-
- if(sp->tx_skb == NULL) {
- sp->tx_skb = kmalloc(sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES, GFP_KERNEL);
- if (!(sp->tx_skb)) {
- printk("%s: %s: tx_skb kmalloc failed\n",
- dev->name, __FUNCTION__);
- ecode = -EAGAIN;
- goto init_error;
- }
- }
- memset(sp->tx_skb, 0, sizeof(struct sk_buff *) * AR2313_DESCR_ENTRIES);
-
- /*
- * Set tx_csm before we start receiving interrupts, otherwise
- * the interrupt handler might think it is supposed to process
- * tx ints before we are up and running, which may cause a null
- * pointer access in the int handler.
- */
- sp->rx_skbprd = 0;
- sp->cur_rx = 0;
- sp->tx_prd = 0;
- sp->tx_csm = 0;
-
- /*
- * Zero the stats before starting the interface
- */
- memset(&sp->stats, 0, sizeof(sp->stats));
-
- /*
- * We load the ring here as there seem to be no way to tell the
- * firmware to wipe the ring without re-initializing it.
- */
- ar2313_load_rx_ring(dev, RX_RING_SIZE);
-
- /*
- * Init hardware
- */
- ar2313_reset_reg(dev);
-
- /*
- * Get the IRQ
- */
- ecode = request_irq(dev->irq, &ar2313_interrupt, SA_SHIRQ | SA_INTERRUPT, dev->name, dev);
- if (ecode) {
- printk(KERN_WARNING "%s: %s: Requested IRQ %d is busy\n",
- dev->name, __FUNCTION__, dev->irq);
- goto init_error;
- }
-
-#if 0
- // commented out, for now
-
- if(mips_machtype == MACH_ARUBA_SAMSUNG) {
- int i;
- /* configure Marvell 88E6060 */
- /* reset chip */
- armiiwrite(0x1f, 0xa, 0xa130);
- do {
- udelay(1000);
- i = armiiread(sp->phy, 0xa);
- } while (i & 0x8000);
-
- /* configure MAC address */
- armiiwrite(sp->phy, 0x1, dev->dev_addr[0] << 8 | dev->dev_addr[1]);
- armiiwrite(sp->phy, 0x2, dev->dev_addr[2] << 8 | dev->dev_addr[3]);
- armiiwrite(sp->phy, 0x3, dev->dev_addr[4] << 8 | dev->dev_addr[5]);
-
- /* set ports to forwarding */
- armiiwrite(0x18, 0x4, 0x3);
- armiiwrite(0x1c, 0x4, 0x3);
- armiiwrite(0x1d, 0x4, 0x3);
- }
-#endif
-
- tasklet_enable(&sp->rx_tasklet);
-
- return 0;
-
- init_error:
- ar2313_init_cleanup(dev);
- return ecode;
-}
-
-/*
- * Load the rx ring.
- *
- * Loading rings is safe without holding the spin lock since this is
- * done only before the device is enabled, thus no interrupts are
- * generated and by the interrupt handler/tasklet handler.
- */
-static void ar2313_load_rx_ring(struct net_device *dev, int nr_bufs)
-{
-
- struct ar2313_private *sp = ((struct net_device *)dev)->priv;
- short i, idx;
-
- idx = sp->rx_skbprd;
-
- for (i = 0; i < nr_bufs; i++) {
- struct sk_buff *skb;
- ar2313_descr_t *rd;
-
- if (sp->rx_skb[idx]) {
-#if DEBUG_RX
- printk(KERN_INFO "ar2313 rx refill full\n");
-#endif /* DEBUG */
- break;
- }
-
- // partha: create additional room for the second GRE fragment
- skb = alloc_skb(AR2313_BUFSIZE+128, GFP_ATOMIC);
- if (!skb) {
- printk("\n\n\n\n %s: No memory in system\n\n\n\n", __FUNCTION__);
- break;
- }
- // partha: create additional room in the front for tx pkt capture
- skb_reserve(skb, 32);
-
- /*
- * Make sure IP header starts on a fresh cache line.
- */
- skb->dev = dev;
- skb_reserve(skb, RX_OFFSET);
- sp->rx_skb[idx] = skb;
-
- rd = (ar2313_descr_t *) &sp->rx_ring[idx];
-
- /* initialize dma descriptor */
- rd->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
- DMA_RX1_CHAINED);
- rd->addr = virt_to_phys(skb->data);
- rd->descr = virt_to_phys(&sp->rx_ring[(idx+1) & (AR2313_DESCR_ENTRIES-1)]);
- rd->status = DMA_RX_OWN;
-
- idx = DSC_NEXT(idx);
- }
-
- if (!i) {
-#if DEBUG_ERR
- printk(KERN_INFO "Out of memory when allocating standard receive buffers\n");
-#endif /* DEBUG */
- } else {
- sp->rx_skbprd = idx;
- }
-
- return;
-}
-
-#define AR2313_MAX_PKTS_PER_CALL 64
-
-static int ar2313_rx_int(struct net_device *dev)
-{
- struct ar2313_private *sp = dev->priv;
- struct sk_buff *skb, *skb_new;
- ar2313_descr_t *rxdesc;
- unsigned int status;
- u32 idx;
- int pkts = 0;
- int rval;
-
- idx = sp->cur_rx;
-
- /* process at most the entire ring and then wait for another interrupt */
- while(1) {
-
- rxdesc = &sp->rx_ring[idx];
- status = rxdesc->status;
- if (status & DMA_RX_OWN) {
- /* SiByte owns descriptor or descr not yet filled in */
- rval = 0;
- break;
- }
-
- if (++pkts > AR2313_MAX_PKTS_PER_CALL) {
- rval = 1;
- break;
- }
-
-#if DEBUG_RX
- printk("index %d\n", idx);
- printk("RX status %08x\n", rxdesc->status);
- printk("RX devcs %08x\n", rxdesc->devcs );
- printk("RX addr %08x\n", rxdesc->addr );
- printk("RX descr %08x\n", rxdesc->descr );
-#endif
-
- if ((status & (DMA_RX_ERROR|DMA_RX_ERR_LENGTH)) &&
- (!(status & DMA_RX_LONG))){
-#if DEBUG_RX
- printk("%s: rx ERROR %08x\n", __FUNCTION__, status);
-#endif
- sp->stats.rx_errors++;
- sp->stats.rx_dropped++;
-
- /* add statistics counters */
- if (status & DMA_RX_ERR_CRC) sp->stats.rx_crc_errors++;
- if (status & DMA_RX_ERR_COL) sp->stats.rx_over_errors++;
- if (status & DMA_RX_ERR_LENGTH)
- sp->stats.rx_length_errors++;
- if (status & DMA_RX_ERR_RUNT) sp->stats.rx_over_errors++;
- if (status & DMA_RX_ERR_DESC) sp->stats.rx_over_errors++;
-
- } else {
- /* alloc new buffer. */
- skb_new = dev_alloc_skb(AR2313_BUFSIZE + RX_OFFSET + 128);
- if (skb_new != NULL) {
-
- skb = sp->rx_skb[idx];
- /* set skb */
- skb_put(skb, ((status >> DMA_RX_LEN_SHIFT) & 0x3fff) - CRC_LEN);
-
-#ifdef CONFIG_MERLOT
- if ((dev->am_pkt_handler == NULL) ||
- (dev->am_pkt_handler(skb, dev) == 0)) {
-#endif
- sp->stats.rx_bytes += skb->len;
- skb->protocol = eth_type_trans(skb, dev);
- /* pass the packet to upper layers */
-
-#ifdef CONFIG_MERLOT
- if (dev->asap_netif_rx)
- dev->asap_netif_rx(skb);
- else
-#endif
- netif_rx(skb);
-#ifdef CONFIG_MERLOT
- }
-#endif
- skb_new->dev = dev;
- /* 16 bit align */
- skb_reserve(skb_new, RX_OFFSET+32);
- /* reset descriptor's curr_addr */
- rxdesc->addr = virt_to_phys(skb_new->data);
-
- sp->stats.rx_packets++;
- sp->rx_skb[idx] = skb_new;
-
- } else {
- sp->stats.rx_dropped++;
- }
- }
-
- rxdesc->devcs = ((AR2313_BUFSIZE << DMA_RX1_BSIZE_SHIFT) |
- DMA_RX1_CHAINED);
- rxdesc->status = DMA_RX_OWN;
-
- idx = DSC_NEXT(idx);
- }
-
- sp->cur_rx = idx;
-
- return rval;
-}
-
-
-static void ar2313_tx_int(struct net_device *dev)
-{
- struct ar2313_private *sp = dev->priv;
- u32 idx;
- struct sk_buff *skb;
- ar2313_descr_t *txdesc;
- unsigned int status=0;
-
- idx = sp->tx_csm;
-
- while (idx != sp->tx_prd) {
-
- txdesc = &sp->tx_ring[idx];
-
-#if DEBUG_TX
- printk("%s: TXINT: csm=%d idx=%d prd=%d status=%x devcs=%x addr=%08x descr=%x\n",
- dev->name, sp->tx_csm, idx, sp->tx_prd,
- txdesc->status, txdesc->devcs, txdesc->addr, txdesc->descr);
-#endif /* DEBUG */
-
- if ((status = txdesc->status) & DMA_TX_OWN) {
- /* ar2313 dma still owns descr */
- break;
- }
- /* done with this descriptor */
- txdesc->status = 0;
-
- if (status & DMA_TX_ERROR){
- sp->stats.tx_errors++;
- sp->stats.tx_dropped++;
- if(status & DMA_TX_ERR_UNDER)
- sp->stats.tx_fifo_errors++;
- if(status & DMA_TX_ERR_HB)
- sp->stats.tx_heartbeat_errors++;
- if(status & (DMA_TX_ERR_LOSS |
- DMA_TX_ERR_LINK))
- sp->stats.tx_carrier_errors++;
- if (status & (DMA_TX_ERR_LATE|
- DMA_TX_ERR_COL |
- DMA_TX_ERR_JABBER |
- DMA_TX_ERR_DEFER))
- sp->stats.tx_aborted_errors++;
- } else {
- /* transmit OK */
- sp->stats.tx_packets++;
- }
-
- skb = sp->tx_skb[idx];
- sp->tx_skb[idx] = NULL;
- idx = DSC_NEXT(idx);
- sp->stats.tx_bytes += skb->len;
- dev_kfree_skb_irq(skb);
- }
-
- sp->tx_csm = idx;
-
- return;
-}
-
-
-static void
-rx_tasklet_func(unsigned long data)
-{
- struct net_device *dev = (struct net_device *) data;
- struct ar2313_private *sp = dev->priv;
-
- if (sp->unloading) {
- return;
- }
-
- if (ar2313_rx_int(dev)) {
- tasklet_hi_schedule(&sp->rx_tasklet);
- }
- else {
- unsigned long flags;
- spin_lock_irqsave(&sp->lock, flags);
- sp->dma_regs->intr_ena |= DMA_STATUS_RI;
- spin_unlock_irqrestore(&sp->lock, flags);
- }
-}
-
-static void
-rx_schedule(struct net_device *dev)
-{
- struct ar2313_private *sp = dev->priv;
-
- sp->dma_regs->intr_ena &= ~DMA_STATUS_RI;
-
- tasklet_hi_schedule(&sp->rx_tasklet);
-}
-
-static irqreturn_t ar2313_interrupt(int irq, void *dev_id)
-{
- struct net_device *dev = (struct net_device *)dev_id;
- struct ar2313_private *sp = dev->priv;
- unsigned int status, enabled;
-
- /* clear interrupt */
- /*
- * Don't clear RI bit if currently disabled.
- */
- status = sp->dma_regs->status;
- enabled = sp->dma_regs->intr_ena;
- sp->dma_regs->status = status & enabled;
-
- if (status & DMA_STATUS_NIS) {
- /* normal status */
- /*
- * Don't schedule rx processing if interrupt
- * is already disabled.
- */
- if (status & enabled & DMA_STATUS_RI) {
- /* receive interrupt */
- rx_schedule(dev);
- }
- if (status & DMA_STATUS_TI) {
- /* transmit interrupt */
- ar2313_tx_int(dev);
- }
- }
-
- if (status & DMA_STATUS_AIS) {
-#if DEBUG_INT
- printk("%s: AIS set %08x & %x\n", __FUNCTION__,
- status, (DMA_STATUS_FBE | DMA_STATUS_TPS));
-#endif
- /* abnormal status */
- if (status & (DMA_STATUS_FBE | DMA_STATUS_TPS)) {
- ar2313_restart(dev);
- }
- }
- return IRQ_HANDLED;
-}
-
-
-static int ar2313_open(struct net_device *dev)
-{
- struct ar2313_private *sp;
-
- sp = dev->priv;
-
- dev->mtu = 1500;
- netif_start_queue(dev);
-
- sp->eth_regs->mac_control |= MAC_CONTROL_RE;
-
- AR2313_MOD_INC_USE_COUNT;
-
- return 0;
-}
-
-static void ar2313_halt(struct net_device *dev)
-{
- struct ar2313_private *sp = dev->priv;
- int j;
-
- tasklet_disable(&sp->rx_tasklet);
-
- /* kill the MAC */
- sp->eth_regs->mac_control &= ~(MAC_CONTROL_RE | /* disable Receives */
- MAC_CONTROL_TE); /* disable Transmits */
- /* stop dma */
- sp->dma_regs->control = 0;
- sp->dma_regs->bus_mode = DMA_BUS_MODE_SWR;
-
- /* place phy and MAC in reset */
- *sp->int_regs |= (ar_int_mac_mask | ar_int_phy_mask);
-
- /* free buffers on tx ring */
- for (j = 0; j < AR2313_DESCR_ENTRIES; j++) {
- struct sk_buff *skb;
- ar2313_descr_t *txdesc;
-
- txdesc = &sp->tx_ring[j];
- txdesc->descr = 0;
-
- skb = sp->tx_skb[j];
- if (skb) {
- dev_kfree_skb(skb);
- sp->tx_skb[j] = NULL;
- }
- }
-}
-
-/*
- * close should do nothing. Here's why. It's called when
- * 'ifconfig bond0 down' is run. If it calls free_irq then
- * the irq is gone forever ! When bond0 is made 'up' again,
- * the ar2313_open () does not call request_irq (). Worse,
- * the call to ar2313_halt() generates a WDOG reset due to
- * the write to 'sp->int_regs' and the box reboots.
- * Commenting this out is good since it allows the
- * system to resume when bond0 is made up again.
- */
-static int ar2313_close(struct net_device *dev)
-{
-#if 0
- /*
- * Disable interrupts
- */
- disable_irq(dev->irq);
-
- /*
- * Without (or before) releasing irq and stopping hardware, this
- * is an absolute non-sense, by the way. It will be reset instantly
- * by the first irq.
- */
- netif_stop_queue(dev);
-
- /* stop the MAC and DMA engines */
- ar2313_halt(dev);
-
- /* release the interrupt */
- free_irq(dev->irq, dev);
-
-#endif
- AR2313_MOD_DEC_USE_COUNT;
- return 0;
-}
-
-static int ar2313_start_xmit(struct sk_buff *skb, struct net_device *dev)
-{
- struct ar2313_private *sp = dev->priv;
- ar2313_descr_t *td;
- u32 idx;
-
- idx = sp->tx_prd;
- td = &sp->tx_ring[idx];
-
- if (td->status & DMA_TX_OWN) {
-#if DEBUG_TX
- printk("%s: No space left to Tx\n", __FUNCTION__);
-#endif
- /* free skbuf and lie to the caller that we sent it out */
- sp->stats.tx_dropped++;
- dev_kfree_skb(skb);
-
- /* restart transmitter in case locked */
- sp->dma_regs->xmt_poll = 0;
- return 0;
- }
-
- /* Setup the transmit descriptor. */
- td->devcs = ((skb->len << DMA_TX1_BSIZE_SHIFT) |
- (DMA_TX1_LS|DMA_TX1_IC|DMA_TX1_CHAINED));
- td->addr = virt_to_phys(skb->data);
- td->status = DMA_TX_OWN;
-
- /* kick transmitter last */
- sp->dma_regs->xmt_poll = 0;
-
-#if DEBUG_TX
- printk("index %d\n", idx);
- printk("TX status %08x\n", td->status);
- printk("TX devcs %08x\n", td->devcs );
- printk("TX addr %08x\n", td->addr );
- printk("TX descr %08x\n", td->descr );
-#endif
-
- sp->tx_skb[idx] = skb;
- idx = DSC_NEXT(idx);
- sp->tx_prd = idx;
-
- //dev->trans_start = jiffies;
-
- return 0;
-}
-
-static int netdev_get_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
-{
- struct ar2313_private *np = dev->priv;
- u32 tmp;
-
- ecmd->supported =
- (SUPPORTED_10baseT_Half | SUPPORTED_10baseT_Full |
- SUPPORTED_100baseT_Half | SUPPORTED_100baseT_Full |
- SUPPORTED_Autoneg | SUPPORTED_TP | SUPPORTED_MII);
-
- ecmd->port = PORT_TP;
- /* only supports internal transceiver */
- ecmd->transceiver = XCVR_INTERNAL;
- /* not sure what this is for */
- ecmd->phy_address = 1;
-
- ecmd->advertising = ADVERTISED_MII;
- tmp = armiiread(np->phy, MII_ADVERTISE);
- if (tmp & ADVERTISE_10HALF)
- ecmd->advertising |= ADVERTISED_10baseT_Half;
- if (tmp & ADVERTISE_10FULL)
- ecmd->advertising |= ADVERTISED_10baseT_Full;
- if (tmp & ADVERTISE_100HALF)
- ecmd->advertising |= ADVERTISED_100baseT_Half;
- if (tmp & ADVERTISE_100FULL)
- ecmd->advertising |= ADVERTISED_100baseT_Full;
-
- tmp = armiiread(np->phy, MII_BMCR);
- if (tmp & BMCR_ANENABLE) {
- ecmd->advertising |= ADVERTISED_Autoneg;
- ecmd->autoneg = AUTONEG_ENABLE;
- } else {
- ecmd->autoneg = AUTONEG_DISABLE;
- }
-
- if (ecmd->autoneg == AUTONEG_ENABLE) {
- tmp = armiiread(np->phy, MII_LPA);
- if (tmp & (LPA_100FULL|LPA_10FULL)) {
- ecmd->duplex = DUPLEX_FULL;
- } else {
- ecmd->duplex = DUPLEX_HALF;
- }
- if (tmp & (LPA_100FULL|LPA_100HALF)) {
- ecmd->speed = SPEED_100;
- } else {
- ecmd->speed = SPEED_10;
- }
- } else {
- if (tmp & BMCR_FULLDPLX) {
- ecmd->duplex = DUPLEX_FULL;
- } else {
- ecmd->duplex = DUPLEX_HALF;
- }
- if (tmp & BMCR_SPEED100) {
- ecmd->speed = SPEED_100;
- } else {
- ecmd->speed = SPEED_10;
- }
- }
-
- /* ignore maxtxpkt, maxrxpkt for now */
-
- return 0;
-}
-
-static int netdev_set_ecmd(struct net_device *dev, struct ethtool_cmd *ecmd)
-{
- struct ar2313_private *np = dev->priv;
- u32 tmp;
-
- if (ecmd->speed != SPEED_10 && ecmd->speed != SPEED_100)
- return -EINVAL;
- if (ecmd->duplex != DUPLEX_HALF && ecmd->duplex != DUPLEX_FULL)
- return -EINVAL;
- if (ecmd->port != PORT_TP)
- return -EINVAL;
- if (ecmd->transceiver != XCVR_INTERNAL)
- return -EINVAL;
- if (ecmd->autoneg != AUTONEG_DISABLE && ecmd->autoneg != AUTONEG_ENABLE)
- return -EINVAL;
- /* ignore phy_address, maxtxpkt, maxrxpkt for now */
-
- /* WHEW! now lets bang some bits */
-
- tmp = armiiread(np->phy, MII_BMCR);
- if (ecmd->autoneg == AUTONEG_ENABLE) {
- /* turn on autonegotiation */
- tmp |= BMCR_ANENABLE;
- printk("%s: Enabling auto-neg\n", dev->name);
- } else {
- /* turn off auto negotiation, set speed and duplexity */
- tmp &= ~(BMCR_ANENABLE | BMCR_SPEED100 | BMCR_FULLDPLX);
- if (ecmd->speed == SPEED_100)
- tmp |= BMCR_SPEED100;
- if (ecmd->duplex == DUPLEX_FULL)
- tmp |= BMCR_FULLDPLX;
- printk("%s: Hard coding %d/%s\n", dev->name,
- (ecmd->speed == SPEED_100)? 100:10,
- (ecmd->duplex == DUPLEX_FULL)? "full":"half");
- }
- armiiwrite(np->phy, MII_BMCR, tmp);
- np->phyData = 0;
- return 0;
-}
-
-static int netdev_ethtool_ioctl(struct net_device *dev, void *useraddr)
-{
- struct ar2313_private *np = dev->priv;
- u32 cmd;
-
- if (get_user(cmd, (u32 *)useraddr))
- return -EFAULT;
-
- switch (cmd) {
- /* get settings */
- case ETHTOOL_GSET: {
- struct ethtool_cmd ecmd = { ETHTOOL_GSET };
- spin_lock_irq(&np->lock);
- netdev_get_ecmd(dev, &ecmd);
- spin_unlock_irq(&np->lock);
- if (copy_to_user(useraddr, &ecmd, sizeof(ecmd)))
- return -EFAULT;
- return 0;
- }
- /* set settings */
- case ETHTOOL_SSET: {
- struct ethtool_cmd ecmd;
- int r;
- if (copy_from_user(&ecmd, useraddr, sizeof(ecmd)))
- return -EFAULT;
- spin_lock_irq(&np->lock);
- r = netdev_set_ecmd(dev, &ecmd);
- spin_unlock_irq(&np->lock);
- return r;
- }
- /* restart autonegotiation */
- case ETHTOOL_NWAY_RST: {
- int tmp;
- int r = -EINVAL;
- /* if autoneg is off, it's an error */
- tmp = armiiread(np->phy, MII_BMCR);
- if (tmp & BMCR_ANENABLE) {
- tmp |= (BMCR_ANRESTART);
- armiiwrite(np->phy, MII_BMCR, tmp);
- r = 0;
- }
- return r;
- }
- /* get link status */
- case ETHTOOL_GLINK: {
- struct ethtool_value edata = {ETHTOOL_GLINK};
- edata.data = (armiiread(np->phy, MII_BMSR)&BMSR_LSTATUS) ? 1:0;
- if (copy_to_user(useraddr, &edata, sizeof(edata)))
- return -EFAULT;
- return 0;
- }
- }
-
- return -EOPNOTSUPP;
-}
-
-static int ar2313_ioctl(struct net_device *dev, struct ifreq *ifr, int cmd)
-{
- struct mii_ioctl_data *data = (struct mii_ioctl_data *)&ifr->ifr_data;
-
- switch (cmd) {
- case SIOCDEVPRIVATE: {
- struct ar2313_cmd scmd;
-
- if (copy_from_user(&scmd, ifr->ifr_data, sizeof(scmd)))
- return -EFAULT;
-
-#if DEBUG
- printk("%s: ioctl devprivate c=%d a=%x l=%d m=%d d=%x,%x\n",
- dev->name, scmd.cmd,
- scmd.address, scmd.length,
- scmd.mailbox, scmd.data[0], scmd.data[1]);
-#endif /* DEBUG */
-
- switch (scmd.cmd) {
- case AR2313_READ_DATA:
- if(scmd.length==4){
- scmd.data[0] = *((u32*)scmd.address);
- } else if(scmd.length==2) {
- scmd.data[0] = *((u16*)scmd.address);
- } else if (scmd.length==1) {
- scmd.data[0] = *((u8*)scmd.address);
- } else {
- return -EOPNOTSUPP;
- }
- if(copy_to_user(ifr->ifr_data, &scmd, sizeof(scmd)))
- return -EFAULT;
- break;
-
- case AR2313_WRITE_DATA:
- if(scmd.length==4){
- *((u32*)scmd.address) = scmd.data[0];
- } else if(scmd.length==2) {
- *((u16*)scmd.address) = scmd.data[0];
- } else if (scmd.length==1) {
- *((u8*)scmd.address) = scmd.data[0];
- } else {
- return -EOPNOTSUPP;
- }
- break;
-
- case AR2313_GET_VERSION:
- // SAMEER: sprintf((char*) &scmd, "%s", ARUBA_VERSION);
- if(copy_to_user(ifr->ifr_data, &scmd, sizeof(scmd)))
- return -EFAULT;
- break;
-
- default:
- return -EOPNOTSUPP;
- }
- return 0;
- }
-
- case SIOCETHTOOL:
- return netdev_ethtool_ioctl(dev, (void *) ifr->ifr_data);
-
- case SIOCGMIIPHY: /* Get address of MII PHY in use. */
- data->phy_id = 1;
- /* Fall Through */
-
- case SIOCGMIIREG: /* Read MII PHY register. */
- case SIOCDEVPRIVATE+1: /* for binary compat, remove in 2.5 */
- data->val_out = armiiread(data->phy_id & 0x1f,
- data->reg_num & 0x1f);
- return 0;
- case SIOCSMIIREG: /* Write MII PHY register. */
- case SIOCDEVPRIVATE+2: /* for binary compat, remove in 2.5 */
- if (!capable(CAP_NET_ADMIN))
- return -EPERM;
- armiiwrite(data->phy_id & 0x1f,
- data->reg_num & 0x1f, data->val_in);
- return 0;
-
- case SIOCSIFHWADDR:
- if (copy_from_user(dev->dev_addr, ifr->ifr_data, sizeof(dev->dev_addr)))
- return -EFAULT;
- return 0;
-
- case SIOCGIFHWADDR:
- if (copy_to_user(ifr->ifr_data, dev->dev_addr, sizeof(dev->dev_addr)))
- return -EFAULT;
- return 0;
-
- default:
- break;
- }
-
- return -EOPNOTSUPP;
-}
-
-static struct net_device_stats *ar2313_get_stats(struct net_device *dev)
-{
- struct ar2313_private *sp = dev->priv;
- return &sp->stats;
-}
-
-static short
-armiiread(short phy, short reg)
-{
- volatile ETHERNET_STRUCT * ethernet;
-
- ethernet = (volatile ETHERNET_STRUCT *)ETHERNET_BASE; /* always MAC 0 */
- ethernet->mii_addr = ((reg << MII_ADDR_REG_SHIFT) |
- (phy << MII_ADDR_PHY_SHIFT));
- while (ethernet->mii_addr & MII_ADDR_BUSY);
- return (ethernet->mii_data >> MII_DATA_SHIFT);
-}
-
-static void
-armiiwrite(short phy, short reg, short data)
-{
- volatile ETHERNET_STRUCT * ethernet;
-
- ethernet = (volatile ETHERNET_STRUCT *)ETHERNET_BASE; /* always MAC 0 */
- while (ethernet->mii_addr & MII_ADDR_BUSY);
- ethernet->mii_data = data << MII_DATA_SHIFT;
- ethernet->mii_addr = ((reg << MII_ADDR_REG_SHIFT) |
- (phy << MII_ADDR_PHY_SHIFT) |
- MII_ADDR_WRITE);
-}
-
projects / openwrt.git / commitdiff