Merged WAP54G v1.0 workaround, closes #205

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@2932 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/openwrt/target/linux/brcm-2.6/patches/004-b44_bcm47xx_support.patch b/openwrt/target/linux/brcm-2.6/patches/004-b44_bcm47xx_support.patch
index e1856f9..5f8f223 100644 (file)
--- a/openwrt/target/linux/brcm-2.6/patches/004-b44_bcm47xx_support.patch
+++ b/openwrt/target/linux/brcm-2.6/patches/004-b44_bcm47xx_support.patch
@@ -1,6 +1,6 @@
-diff -urN linux.old/drivers/net/b44.c linux.dev/drivers/net/b44.c
---- linux.old/drivers/net/b44.c        2006-01-12 01:44:42.548326000 +0100
-+++ linux.dev/drivers/net/b44.c        2006-01-12 03:07:38.209775500 +0100
+diff -urN orig/linux-2.6.15/drivers/net/b44.c linux-2.6.15/drivers/net/b44.c
+--- orig/linux-2.6.15/drivers/net/b44.c        2006-01-03 04:21:10.000000000 +0100
++++ linux-2.6.15/drivers/net/b44.c     2006-01-12 12:22:58.760883688 +0100
 @@ -1,7 +1,9 @@
 -/* b44.c: Broadcom 4400 device driver.
 +/* b44.c: Broadcom 4400/47xx device driver.
@@ -156,16 +156,38 @@ diff -urN linux.old/drivers/net/b44.c linux.dev/drivers/net/b44.c
        err = b44_writephy(bp, MII_BMCR, BMCR_RESET);
        if (err)
                return err;
-@@ -439,6 +478,8 @@
+@@ -439,6 +478,30 @@
        u32 val;
        int err;
  
++#ifdef CONFIG_BCM947XX
++      if (bp->pdev->device == PCI_DEVICE_ID_BCM4713) {
++              /*
++               * workaround for bad hardware design in Linksys WAP54G v1.0
++               * see https://dev.openwrt.org/ticket/146
++               * check and reset bit "isolate"
++               */
++              if (!strcmp(nvram_get("boardnum"), "2\r")) {
++                      u32 val;
++                      if (__b44_readphy(bp, 0, MII_BMCR, &val) != 0) {
++                              printk(KERN_WARNING PFX "%s: PHY WAP54G: cannot access PHY.\n", 
++                                      bp->dev->name);
++                      } else if (val & BMCR_ISOLATE) {
++                              printk(KERN_INFO PFX "%s: PHY WAP54G: resetting isolate bit.\n",
++                                      bp->dev->name);
++                              if (__b44_writephy(bp, 0, MII_BMCR, val & ~BMCR_ISOLATE) != 0)
++                                      printk(KERN_WARNING PFX "PHY WAP54G: cannot reset isolate bit.\n");
++                      }
++              }
++      }
++#endif
++
 +      if (bp->phy_addr == B44_PHY_ADDR_NO_PHY)
 +              return 0;
        if ((err = b44_readphy(bp, B44_MII_ALEDCTRL, &val)) != 0)
                goto out;
        if ((err = b44_writephy(bp, B44_MII_ALEDCTRL,
-@@ -534,6 +575,19 @@
+@@ -534,6 +597,19 @@
  {
        u32 bmsr, aux;
  
@@ -185,7 +207,7 @@ diff -urN linux.old/drivers/net/b44.c linux.dev/drivers/net/b44.c
        if (!b44_readphy(bp, MII_BMSR, &bmsr) &&
            !b44_readphy(bp, B44_MII_AUXCTRL, &aux) &&
            (bmsr != 0xffff)) {
-@@ -1281,9 +1335,10 @@
+@@ -1281,9 +1357,10 @@
                bw32(bp, B44_DMARX_CTRL, 0);
                bp->rx_prod = bp->rx_cons = 0;
        } else {
@@ -199,7 +221,7 @@ diff -urN linux.old/drivers/net/b44.c linux.dev/drivers/net/b44.c
        }
  
        ssb_core_reset(bp);
-@@ -1291,8 +1346,14 @@
+@@ -1291,8 +1368,14 @@
        b44_clear_stats(bp);
  
        /* Make PHY accessible. */
@@ -215,7 +237,7 @@ diff -urN linux.old/drivers/net/b44.c linux.dev/drivers/net/b44.c
        br32(bp, B44_MDIO_CTRL);
  
        if (!(br32(bp, B44_DEVCTRL) & DEVCTRL_IPP)) {
-@@ -1834,18 +1895,297 @@
+@@ -1834,18 +1917,297 @@
        .get_perm_addr          = ethtool_op_get_perm_addr,
  };
  
@@ -517,7 +539,7 @@ diff -urN linux.old/drivers/net/b44.c linux.dev/drivers/net/b44.c
  out:
        return err;
  }
-@@ -1865,22 +2205,43 @@
+@@ -1865,22 +2227,43 @@
  static int __devinit b44_get_invariants(struct b44 *bp)
  {
        u8 eeprom[128];
@@ -575,7 +597,7 @@ diff -urN linux.old/drivers/net/b44.c linux.dev/drivers/net/b44.c
        /* With this, plus the rx_header prepended to the data by the
         * hardware, we'll land the ethernet header on a 2-byte boundary.
         */
-@@ -1889,11 +2250,7 @@
+@@ -1889,11 +2272,7 @@
        bp->imask = IMASK_DEF;
  
        bp->core_unit = ssb_core_unit(bp);
@@ -587,7 +609,7 @@ diff -urN linux.old/drivers/net/b44.c linux.dev/drivers/net/b44.c
  out:
        return err;
  }
-@@ -2032,11 +2389,17 @@
+@@ -2032,11 +2411,17 @@
  
        pci_save_state(bp->pdev);
  
@@ -606,9 +628,9 @@ diff -urN linux.old/drivers/net/b44.c linux.dev/drivers/net/b44.c
        return 0;
  
  err_out_iounmap:
-diff -urN linux.old/drivers/net/b44.h linux.dev/drivers/net/b44.h
---- linux.old/drivers/net/b44.h        2006-01-12 01:44:42.548326000 +0100
-+++ linux.dev/drivers/net/b44.h        2006-01-12 02:55:06.290783500 +0100
+diff -urN orig/linux-2.6.15/drivers/net/b44.h linux-2.6.15/drivers/net/b44.h
+--- orig/linux-2.6.15/drivers/net/b44.h        2006-01-03 04:21:10.000000000 +0100
++++ linux-2.6.15/drivers/net/b44.h     2006-01-12 12:16:02.403179680 +0100
 @@ -292,6 +292,10 @@
  #define SSB_PCI_MASK1         0xfc000000
  #define SSB_PCI_MASK2         0xc0000000