[adm8668] clean up mach-adm8668 includes

This patch cleans up the include directory, as they were from vendors
2.4 GPL source. Now only what's used is there.

Signed-off-by: Scott Nicholas <scott.nicholas@scottn.us>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@25175 3c298f89-4303-0410-b956-a3cf2f4a3e73

diff --git a/target/linux/adm8668/files/arch/mips/adm8668/platform.c b/target/linux/adm8668/files/arch/mips/adm8668/platform.c
index e97ad6a..4de38fd 100644 (file)
--- a/target/linux/adm8668/files/arch/mips/adm8668/platform.c
+++ b/target/linux/adm8668/files/arch/mips/adm8668/platform.c
@@ -85,9 +85,9 @@ static void adm8668_restart(char *cmd)
        int i;
 
        /* stop eth0 and eth1 */
-       ADM8668_LAN_REG(NETCSR6) = BIT_1|BIT_13;
+       ADM8668_LAN_REG(NETCSR6) = (1 << 13) | (1 << 1);
        ADM8668_LAN_REG(NETCSR7) = 0;
-       ADM8668_WAN_REG(NETCSR6) = BIT_1|BIT_13;
+       ADM8668_WAN_REG(NETCSR6) = (1 << 13) | (1 << 1);
        ADM8668_WAN_REG(NETCSR7) = 0;
 
        /* reset PHY */
@@ -105,7 +105,7 @@ static void adm8668_restart(char *cmd)
        /* the real deal */
        for (i = 0; i < 1000; i++)
                ;
-       ADM8668_CONFIG_REG(ADM8668_CR1) = BIT_0;
+       ADM8668_CONFIG_REG(ADM8668_CR1) = 1;
 }
 
 int __devinit adm8668_devs_register(void)

diff --git a/target/linux/adm8668/files/arch/mips/adm8668/prom.c b/target/linux/adm8668/files/arch/mips/adm8668/prom.c
index 53731c1..7187f29 100644 (file)
--- a/target/linux/adm8668/files/arch/mips/adm8668/prom.c
+++ b/target/linux/adm8668/files/arch/mips/adm8668/prom.c
@@ -96,7 +96,7 @@ void __init prom_setup_cmdline(void)
                prom_argv[i] = (char *)KSEG0ADDR(prom_argv[i]);
 
                /* default bootargs has "console=/dev/ttyS0" yet console won't
-                * show up at all if you do this ... */
+                * show up at all if you include the '/dev/' nowadays ... */
                if (match_tag(prom_argv[i], "console=/dev/")) {
                        char *ptr = prom_argv[i] + strlen("console=/dev/");
 
@@ -128,7 +128,6 @@ void __init prom_init(void)
 
        memsize = bd->bi_memsize;
        printk("Board info:\n");
-       printk("  Board ID: %#lx\n", bd->bi_arch_number);
        printk("  RAM size: %d MB\n", (int)memsize/(1024*1024));
        printk("  NOR start: %#lx\n", bd->bi_flashstart);
        printk("  NOR size: %#lx\n", bd->bi_flashsize);

diff --git a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/adm8668.h b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/adm8668.h
index 7898ccf..2cf65d8 100644 (file)
--- a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/adm8668.h
+++ b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/adm8668.h
@@ -9,20 +9,7 @@
 #ifndef  __ADM8668_H__
 #define  __ADM8668_H__
 
-#include <asm/addrspace.h>
-#include "bsp_sup.h"
-
-#define MEM_KSEG0_BASE         0x80000000
-#define MEM_KSEG1_BASE         0xA0000000
-#define MEM_SEG_MASK           0xE0000000
-#define KVA2PA(_addr)          ((unsigned long)(_addr) & ~MEM_SEG_MASK)
-
-#define MIPS_KSEG0A(_addr)     (KVA2PA(_addr) | MEM_KSEG0_BASE)
-#define MIPS_KSEG1A(_addr)     (KVA2PA(_addr) | MEM_KSEG1_BASE)
-
-#define PA2VA(_addr)           (KVA2PA(_addr) | MEM_KSEG1_BASE)
-#define PA2CACHEVA(_addr)      (KVA2PA(_addr) | MEM_KSEG0_BASE)
-
+#define SYS_CLOCK              175000000
 
 /*=======================  Physical Memory Map  ============================*/
 #define ADM8668_SDRAM_BASE     0
@@ -37,115 +24,45 @@
 #define ADM8668_TMR_BASE       0x1E200000
 #define ADM8668_UART0_BASE     0x1E400000
 #define ADM8668_SMEM0_BASE     0x1FC00000
-#define ADM8668_NAND_BASE      0x1fffff00
+#define ADM8668_NAND_BASE      0x1FFFFF00
 
 #define PCICFG_BASE            0x12200000
 #define PCIDAT_BASE            0x12400000
 
-/* for PCI bridge fixup ! */
-#define PCI_BRIDGE_MASK                0x40
-
-/* WLAN registers */
-#define WCSR0                  0x00
-#define WCSR11A                        0x5c
-
-#define GPIO_REG               WCSR11A
-
-#define ADM8668_WLAN_REG(_reg)         \
-       (*((volatile unsigned int *)(PA2VA(ADM8668_WLAN_BASE + (_reg)))))
+/** onboard uart **/
+#define ADM8668_UARTCLK_FREQ   62500000
+/* registers */
+#define UART_DR_REG            0x00
+#define UART_RSR_REG           0x04
+#define UART_CR_REG            0x14
+#define UART_FR_REG            0x18
+#define UART_IIR_REG           0x1C
 
-/* configuration registers */
-#define ADM8668_CR0            0x00
-#define ADM8668_CR1            0x04
-#define ADM8668_CR2            0x08
-#define ADM8668_CR3            0x0C
-#define ADM8668_CR8            0x20
-#define ADM8668_CR10           0x28
-#define ADM8668_CR11           0x2C
-#define ADM8668_CR12           0x30
-#define ADM8668_CR13           0x34
-#define ADM8668_CR14           0x38
-#define ADM8668_CR15           0x3C
-#define ADM8668_CR16           0x40
-#define ADM8668_CR17           0x44
-#define ADM8668_CR18           0x48
-#define ADM8668_CR19           0x4C
-#define ADM8668_CR20           0x50
-#define ADM8668_CR21           0x54
-#define ADM8668_CR22           0x58
-#define ADM8668_CR23           0x5C
-#define ADM8668_CR24           0x60
-#define ADM8668_CR25           0x64
-#define ADM8668_CR26           0x68
-#define ADM8668_CR27           0x6C
-#define ADM8668_CR28           0x70
-#define ADM8668_CR29           0x74
-#define ADM8668_CR30           0x78
-#define ADM8668_CR31           0x7C
-#define ADM8668_CR32           0x80
-#define ADM8668_CR33           0x84
-#define ADM8668_CR34           0x88
-#define ADM8668_CR35           0x8C
-#define ADM8668_CR36           0x90
-#define ADM8668_CR37           0x94
-#define ADM8668_CR38           0x98
-#define ADM8668_CR39           0x9C
-#define ADM8668_CR40           0xA0
-#define ADM8668_CR41           0xA4
-#define ADM8668_CR42           0xA8
-#define ADM8668_CR43           0xAC
-#define ADM8668_CR44           0xB0
-#define ADM8668_CR45           0xB4
-#define ADM8668_CR46           0xB8
-#define ADM8668_CR47           0xBC
-#define ADM8668_CR48           0xC0
-#define ADM8668_CR49           0xC4
-#define ADM8668_CR50           0xC8
-#define ADM8668_CR51           0xCC
-#define ADM8668_CR52           0xD0
-#define ADM8668_CR53           0xD4
-#define ADM8668_CR54           0xD8
-#define ADM8668_CR55           0xDC
-#define ADM8668_CR56           0xE0
-#define ADM8668_CR57           0xE4
-#define ADM8668_CR58           0xE8
-#define ADM8668_CR59           0xEC
-#define ADM8668_CR60           0xF0
-#define ADM8668_CR61           0xF4
-#define ADM8668_CR62           0xF8
-#define ADM8668_CR63           0xFC
-#define ADM8668_CR64           0x100
-#define ADM8668_CR65           0x104
-#define ADM8668_CR66           0x108
-#define ADM8668_CR67           0x10C
-#define ADM8668_CR68           0x110
+/* rsr reg */
+#define UART_FRAMING_ERR       0x01
+#define UART_PARITY_ERR                0x02
+#define UART_BREAK_ERR         0x04
+#define UART_OVERRUN_ERR       0x08
+#define UART_RX_STATUS_MASK    0x0F
 
-#define CRGPIO_REG             ADM8668_CR8
+/* cr reg */
+#define UART_RX_INT_EN         0x10
+#define UART_TX_INT_EN         0x20
+#define UART_RX_TIMEOUT_INT_EN 0x40
 
-#define ADM8668_CONFIG_REG(_reg)               \
-       (*((volatile unsigned int *)(PA2VA(ADM8668_CONFIG_BASE + (_reg)))))
-#define ADM8668_MPMC_REG(_reg)         \
-       (*((volatile unsigned int *)(PA2VA(ADM8668_MPMC_BASE + (_reg)))))
+/* fr reg */
+#define UART_RX_FIFO_EMPTY     0x10
+#define UART_TX_FIFO_FULL      0x20
 
+/* iir reg */
+#define UART_RX_INT            0x02
+#define UART_TX_INT            0x04
+#define UART_RX_TIMEOUT_INT    0x08
 
-/*==========================  Interrupt Controller ==========================*/
-/* registers offset */
+/* interrupt controller */
 #define IRQ_STATUS_REG         0x00    /* Read */
-#define IRQ_RAW_STATUS_REG     0x04    /* Read */
 #define IRQ_ENABLE_REG         0x08    /* Read/Write */
 #define IRQ_DISABLE_REG                0x0C    /* Write */
-#define IRQ_SOFT_REG           0x10    /* Write */
-
-#define FIQ_STATUS_REG         0x100   /* Read */
-#define FIQ_RAW_STATUS_REG     0x104
-#define FIQ_ENABLE_REG         0x108
-#define FIQ_DISABLE_REG                0x10c
-
-
-/*  Macro for accessing Interrupt controller register  */
-#define ADM8668_INTC_REG(_reg)         \
-       (*((volatile unsigned long *)(PA2VA(ADM8668_INTC_BASE + (_reg)))))
-
 
 /* interrupt levels */
 #define INT_LVL_SWI            1
@@ -165,146 +82,31 @@
 #define INT_LVL_USB            15
 #define INT_LVL_MAX            INT_LVL_USB
 
-#define IRQ_MASK               0xffff
-
-#define IRQ_SWI                        (0x1<<INT_LVL_SWI)
-#define IRQ_TIMERINT0          (0x1<<INT_LVL_TIMERINT0)
-#define IRQ_TIMERINT1          (0x1<<INT_LVL_TIMERINT1)
-#define IRQ_UART0              (0x1<<INT_LVL_UART0)
-#define IRQ_LAN                        (0x1<<INT_LVL_LAN)
-#define IRQ_WAN                        (0x1<<INT_LVL_WAN)
-#define IRQ_WLAN               (0x1<<INT_LVL_WLAN)
-#define IRQ_GPIO               (0x1<<INT_LVL_GPIO)
-#define IRQ_IDEINT             (0x1<<INT_LVL_IDE)
-#define IRQ_PCI2               (0x1<<INT_LVL_PCI2)
-#define IRQ_PCI1               (0x1<<INT_LVL_PCI1)
-#define IRQ_PCI0               (0x1<<INT_LVL_PCI0)
-#define IRQ_USB                        (0x1<<INT_LVL_USB)
-
-
-/*===========================  UART Control Register ========================*/
-#define UART_DR_REG            0x00
-#define UART_RSR_REG           0x04
-#define UART_ECR_REG           0x04
-#define UART_LCR_H_REG         0x08
-#define UART_LCR_M_REG         0x0c
-#define UART_LCR_L_REG         0x10
-#define UART_CR_REG            0x14
-#define UART_FR_REG            0x18
-#define UART_IIR_REG           0x1c
-#define UART_ICR_REG           0x1C
-#define UART_ILPR_REG          0x20
-
-/*  rsr/ecr reg  */
-#define UART_OVERRUN_ERR       0x08
-#define UART_BREAK_ERR         0x04
-#define UART_PARITY_ERR                0x02
-#define UART_FRAMING_ERR       0x01
-#define UART_RX_STATUS_MASK    0x0f
-#define UART_RX_ERROR          ( UART_BREAK_ERR        \
-                               | UART_PARITY_ERR       \
-                               | UART_FRAMING_ERR)
-
-/*  lcr_h reg  */
-#define UART_SEND_BREAK                0x01
-#define UART_PARITY_EN         0x02
-#define UART_EVEN_PARITY       0x04
-#define UART_TWO_STOP_BITS     0x08
-#define UART_ENABLE_FIFO       0x10
-
-#define UART_WLEN_5BITS                0x00
-#define UART_WLEN_6BITS                0x20
-#define UART_WLEN_7BITS                0x40
-#define UART_WLEN_8BITS                0x60
-#define UART_WLEN_MASK         0x60
-
-/*  cr reg  */
-#define UART_PORT_EN                   0x01
-#define UART_SIREN                     0x02
-#define UART_SIRLP                     0x04
-#define UART_MODEM_STATUS_INT_EN       0x08
-#define UART_RX_INT_EN                 0x10
-#define UART_TX_INT_EN                 0x20
-#define UART_RX_TIMEOUT_INT_EN         0x40
-#define UART_LOOPBACK_EN               0x80
-
-/*  fr reg  */
-#define UART_CTS               0x01
-#define UART_DSR               0x02
-#define UART_DCD               0x04
-#define UART_BUSY              0x08
-#define UART_RX_FIFO_EMPTY     0x10
-#define UART_TX_FIFO_FULL      0x20
-#define UART_RX_FIFO_FULL      0x40
-#define UART_TX_FIFO_EMPTY     0x80
-
-/*  iir/icr reg  */
-#define UART_MODEM_STATUS_INT  0x01
-#define UART_RX_INT            0x02
-#define UART_TX_INT            0x04
-#define UART_RX_TIMEOUT_INT    0x08
-
-#define UART_INT_MASK          0x0f
-
-#ifdef _FPGA_
-#define ADM8668_UARTCLK_FREQ   3686400
-#else
-#define ADM8668_UARTCLK_FREQ   62500000
-#endif
-
-#define UART_BAUDDIV(_rate)                            \
-       ((unsigned long)(ADM8668_UARTCLK_FREQ/(16*(_rate)) - 1))
-
-/*  uart_baudrate  */
-#define UART_230400bps_DIVISOR UART_BAUDDIV(230400)
-#define UART_115200bps_DIVISOR UART_BAUDDIV(115200)
-#define UART_76800bps_DIVISOR  UART_BAUDDIV(76800)
-#define UART_57600bps_DIVISOR  UART_BAUDDIV(57600)
-#define UART_38400bps_DIVISOR  UART_BAUDDIV(38400)
-#define UART_19200bps_DIVISOR  UART_BAUDDIV(19200)
-#define UART_14400bps_DIVISOR  UART_BAUDDIV(14400)
-#define UART_9600bps_DIVISOR   UART_BAUDDIV(9600)
-#define UART_2400bps_DIVISOR   UART_BAUDDIV(2400)
-#define UART_1200bps_DIVISOR   UART_BAUDDIV(1200)
-
-
-/*===========================  Counter Timer ==============================*/
-#define TIMER0_REG_BASE                ADM8668_TMR_BASE
-#define TIMER1_REG_BASE                ADM8668_TMR_BASE+0x20
-
-#define TIMER_LOAD_REG         0x00
-#define TIMER_VALUE_REG                0x04
-#define TIMER_CTRL_REG         0x08
-#define TIMER_CLR_REG          0x0c
-
-/* TIMER_LOAD_REG */
-#ifdef _FPGA_
-#define SYS_CLOCK              56000000
-#else
-#define SYS_CLOCK              175000000
-#endif
-
-#define SYS_PRESCALE           256
-
-#define TMR_10MS_TICKS         (SYS_CLOCK/SYS_PRESCALE/100)
-
-/* TIMER_CTRL_REG */
-#define TMR_PRESCALE_1         0x00
-#define TMR_PRESCALE_16                0x04
-#define TMR_PRESCALE_256       0x08
-#define TMR_MODE_PERIODIC      0x40
-#define TMR_ENABLE             0x80
-
-/* TIMER_CLR_REG */
-#define TMR_CLEAR_BIT          1
-
+/* register access macros */
+#define ADM8668_INTC_REG(_reg) \
+       (*((volatile unsigned long *)(KSEG1ADDR(ADM8668_INTC_BASE + (_reg)))))
+#define ADM8668_LAN_REG(_reg)          \
+       (*((volatile unsigned int *)(KSEG1ADDR(ADM8668_LAN_BASE + (_reg)))))
+#define ADM8668_WAN_REG(_reg)          \
+       (*((volatile unsigned int *)(KSEG1ADDR(ADM8668_WAN_BASE + (_reg)))))
+#define ADM8668_WLAN_REG(_reg)         \
+       (*((volatile unsigned int *)(KSEG1ADDR(ADM8668_WLAN_BASE + (_reg)))))
+#define ADM8668_CONFIG_REG(_reg)       \
+       (*((volatile unsigned int *)(KSEG1ADDR(ADM8668_CONFIG_BASE + (_reg)))))
 
-/* Macro for access MPMC register */
-#define ADM8668_TMR_REG(base, _offset)                         \
-               (*((volatile unsigned long *)(PA2VA(base + (_offset)))))
+/* lan registers */
+#define        NETCSR6                 0x30
+#define        NETCSR7                 0x38
+#define        NETCSR37                0xF8
 
+/* known/used CPU configuration registers */
+#define ADM8668_CR0            0x00
+#define ADM8668_CR1            0x04
+#define ADM8668_CR3            0x0C
 
-/* For GPIO control */
+/** For GPIO control **/
+#define        GPIO_REG                0x5C    /* on WLAN */
+#define CRGPIO_REG             0x20    /* on CPU */
 #define GPIO0_OUTPUT_ENABLE    0x1000
 #define GPIO1_OUTPUT_ENABLE    0x2000
 #define GPIO2_OUTPUT_ENABLE    0x4000
@@ -334,83 +136,4 @@
 #define CRGPIO_TOGGLE(num)     \
        ADM8668_CONFIG_REG(CRGPIO_REG) ^= (1 << (6 + num))
 
-
-/*==========================================================================*/
-/* Cache Controller */
-#define ADM8668_CACHE_LINE_SIZE                16
-
-#define BIT_0                  0x00000001
-#define BIT_1                  0x00000002
-#define BIT_2                  0x00000004
-#define BIT_3                  0x00000008
-#define BIT_4                  0x00000010
-#define BIT_5                  0x00000020
-#define BIT_6                  0x00000040
-#define BIT_7                  0x00000080
-#define BIT_8                  0x00000100
-#define BIT_9                  0x00000200
-#define BIT_10                 0x00000400
-#define BIT_11                 0x00000800
-#define BIT_12                 0x00001000
-#define BIT_13                 0x00002000
-#define BIT_14                 0x00004000
-#define BIT_15                 0x00008000
-#define BIT_16                 0x00010000
-#define BIT_17                 0x00020000
-#define BIT_18                 0x00040000
-#define BIT_19                 0x00080000
-#define BIT_20                 0x00100000
-#define BIT_21                 0x00200000
-#define BIT_22                 0x00400000
-#define BIT_23                 0x00800000
-#define BIT_24                 0x01000000
-#define BIT_25                 0x02000000
-#define BIT_26                 0x04000000
-#define BIT_27                 0x08000000
-#define BIT_28                 0x10000000
-#define BIT_29                 0x20000000
-#define BIT_30                 0x40000000
-#define BIT_31                 0x80000000
-
-/* network regs */
-#define        NETCSR0                 0x0
-#define        NETCSR1                 0x08
-#define        NETCSR2                 0x10
-#define        NETCSR3                 0x18
-#define        NETCSR4                 0x20
-#define        NETCSR5                 0x28
-#define        NETCSR6                 0x30
-#define        NETCSR7                 0x38
-#define        NETCSR8                 0x40
-#define        NETCSR9                 0x48
-#define        NETCSR10                0x50
-#define        NETCSR11                0x58
-#define        NETCSR12                0x60
-#define        NETCSR13                0x68
-#define        NETCSR14                0x70
-#define        NETCSR15                0x78
-#define        NETCSR36                0xD0
-#define        NETCSR36A               0xD4
-#define        NETCSR36B               0xD8
-#define        NETCSR36C               0xDC    // dummy
-#define        NETCSR36D               0xE0
-#define        NETCSR36E               0xE4
-#define        NETCSR36F               0xE8
-#define        NETCSR36G               0xEC
-#define        NETCSR36H               0xF0
-#define        NETCSR36I               0xF4
-#define        NETCSR37                0xF8
-
-/* for descriptor skip DWs */
-#define NETDESCSKIP_1DW                BIT_2
-#define NETDESCSKIP_2DW                BIT_3
-#define NETDESCSKIP_3DW                (BIT_3|BIT_2)
-#define NETDESCSKIP_4DW                BIT_4
-
-
-#define ADM8668_LAN_REG(_reg)          \
-       (*((volatile unsigned int *)(PA2VA(ADM8668_LAN_BASE + (_reg)))))
-#define ADM8668_WAN_REG(_reg)          \
-       (*((volatile unsigned int *)(PA2VA(ADM8668_WAN_BASE + (_reg)))))
-
 #endif /* __ADM8668_H__ */

diff --git a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/bsp_sup.h b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/bsp_sup.h
deleted file mode 100644 (file)
index 23fdab9..0000000
--- a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/bsp_sup.h
+++ /dev/null
@@ -1,84 +0,0 @@
-/************************************************************************
- *
- *    Copyright (c) 2005
- *    Infineon Technologies AG
- *    St. Martin Strasse 53; 81669 Muenchen; Germany
- *
- ************************************************************************/
-#ifndef _BSP_SUP_H_
-#define _BSP_SUP_H_
-
-#define ADD_WAN_MAC
-#define CONFIG_IFX_GAN
-#define UBOOT_CFG_ENV_SIZE     (0x400-4)
-#define ADM8668_BL_MAGIC       0x6c62676d
-#define ADM8668_MAC_MAGIC      0x69666164
-#define ADM8668_VER_MAGIC      0x7276676d
-#define ADM8668_ID_MAGIC       0x6469676d
-#define ADM8668_IF_MAGIC       0x6669676d
-#define ADM8668_WANMAC_MAGIC   0x69666164
-#define ADM8668_IMEI_MAGIC     0x6669676e
-
-#define BSP_IFNAME_MAX_LEN     15
-#define BOOT_LINE_SIZE         255
-#define BSP_STR_LEN            79
-
-
-/*
- * Boot mode configuration
- */
-typedef struct BTMODE_CFG_S
-{
-       unsigned long btmode;
-       unsigned long dlmethod;
-} BTMODE_CFG_T;
-
-
-/*
- * Interface configuration
- */
-typedef struct IF_CFG_S
-{
-       char ifname[BSP_IFNAME_MAX_LEN+1];
-       unsigned long ip;
-       unsigned long mask;
-       unsigned long gateway;
-} IF_CFG_T;
-
-
-/*
- * Board configuration
- */
-typedef struct BOARD_CFG_S
-{
-       unsigned long blmagic;
-       unsigned char blreserved[UBOOT_CFG_ENV_SIZE];
-
-       unsigned long macmagic;
-       unsigned char mac[8];
-       unsigned long macnum;
-
-       unsigned long idmagic;
-       unsigned char serial[BSP_STR_LEN+1];
-
-       unsigned long vermagic;
-       unsigned char ver[BSP_STR_LEN+1];
-
-       unsigned long ifmagic;
-       IF_CFG_T ifcfg[8];
-
-       unsigned long btmagic;
-       BTMODE_CFG_T bootmode;
-
-       unsigned long wanmagic;
-       unsigned char wanmac[8];
-
-       unsigned long imeimagic;
-       unsigned char imei0[16];
-       unsigned char imei1[16];
-} BOARD_CFG_T, *PBOARD_CFG_T;
-
-#define ADM8668_BOARD_CFG_ADDR (ADM8668_SMEM0_BASE + CONFIG_ADM8668_BSP_OFFSET*1024)
-#define ADM8668_BOARD_CFG_SIZE (CONFIG_ADM8668_BSP_SIZE*1024)
-
-#endif  /* _BSP_SUP_H_   */

diff --git a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/irq.h b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/irq.h
index 425bba6..1341309 100644 (file)
--- a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/irq.h
+++ b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/irq.h
@@ -8,28 +8,9 @@
 #ifndef __ASM_MACH_ADM8668_IRQ_H
 #define __ASM_MACH_ADM8668_IRQ_H
 
-#ifndef NR_IRQS
-#define NR_IRQS        32
-#endif
+#define        NR_IRQS 32
+#define        MIPS_CPU_IRQ_BASE       16
 
-#ifdef CONFIG_IRQ_CPU
-
-#ifndef MIPS_CPU_IRQ_BASE
-#define MIPS_CPU_IRQ_BASE 16
-#endif
-
-#ifdef CONFIG_IRQ_CPU_RM7K
-#ifndef RM7K_CPU_IRQ_BASE
-#define RM7K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+8)
-#endif
-#endif
-
-#ifdef CONFIG_IRQ_CPU_RM9K
-#ifndef RM9K_CPU_IRQ_BASE
-#define RM9K_CPU_IRQ_BASE (MIPS_CPU_IRQ_BASE+12)
-#endif
-#endif
-
-#endif /* CONFIG_IRQ_CPU */
+#define IRQ_MASK               0xffff
 
 #endif /* __ASM_MACH_ADM8668_IRQ_H */

diff --git a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/prom.h b/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/prom.h
deleted file mode 100644 (file)
index 000d0f4..0000000
--- a/target/linux/adm8668/files/arch/mips/include/asm/mach-adm8668/prom.h
+++ /dev/null
@@ -1,55 +0,0 @@
-/*
- * Carsten Langgaard, carstenl@mips.com
- * Copyright (C) 2000 MIPS Technologies, Inc.  All rights reserved.
- *
- * ########################################################################
- *
- *  This program is free software; you can distribute it and/or modify it
- *  under the terms of the GNU General Public License (Version 2) as
- *  published by the Free Software Foundation.
- *
- *  This program is distributed in the hope it will be useful, but WITHOUT
- *  ANY WARRANTY; without even the implied warranty of MERCHANTABILITY or
- *  FITNESS FOR A PARTICULAR PURPOSE.  See the GNU General Public License
- *  for more details.
- *
- *  You should have received a copy of the GNU General Public License along
- *  with this program; if not, write to the Free Software Foundation, Inc.,
- *  59 Temple Place - Suite 330, Boston MA 02111-1307, USA.
- *
- * ########################################################################
- *
- * MIPS boards bootprom interface for the Linux kernel.
- *
- */
-/************************************************************************
- *
- * Copyright (c) 2005
- * Infineon Technologies AG
- * St. Martin Strasse 53; 81669 Muenchen; Germany
- *
- ************************************************************************/
-#ifndef _MIPS_PROM_H
-#define _MIPS_PROM_H
-
-extern char *prom_getcmdline(void);
-extern char *prom_getenv(char *name);
-extern void setup_prom_printf(int tty_no);
-extern void prom_printf(char *fmt, ...);
-extern void prom_init_cmdline(void);
-extern void prom_meminit(void);
-extern void prom_fixup_mem_map(unsigned long start_mem, unsigned long end_mem);
-extern void prom_free_prom_memory (void);
-extern void mips_display_message(const char *str);
-extern void mips_display_word(unsigned int num);
-extern int get_ethernet_addr(char *ethernet_addr);
-
-/* Memory descriptor management. */
-#define PROM_MAX_PMEMBLOCKS    32
-struct prom_pmemblock {
-        unsigned long base; /* Within KSEG0. */
-        unsigned int size;  /* In bytes. */
-        unsigned int type;  /* free or prom memory */
-};
-
-#endif /* !(_MIPS_PROM_H) */

diff --git a/target/linux/adm8668/image/lzma-loader/src/Makefile b/target/linux/adm8668/image/lzma-loader/src/Makefile
index c1be46f..998e390 100644 (file)
--- a/target/linux/adm8668/image/lzma-loader/src/Makefile
+++ b/target/linux/adm8668/image/lzma-loader/src/Makefile
@@ -5,7 +5,7 @@
 # See /LICENSE for more information.
 #
 RAMSTART       = 0x80000000
-RAMSIZE                = 0x00800000            # 1MB
+RAMSIZE                = 0x00800000            # 8MB
 LOADADDR       = 0x80400000            # RAM start + 4M
 KERNEL_ENTRY   = 0x80002000