+++ /dev/null
-menu "Configuration"
- depends on PACKAGE_uboot-ifxmips
-
-config IFXMIPS_UBOOT_A800
- bool "add ARV452 Switch bringup hack"
- help
- Say Y, if you have a arv452 board (wav-281, A800, ..)
-
-endmenu
+++ /dev/null
-#
-# Copyright (C) 2008 OpenWrt.org
-#
-# This is free software, licensed under the GNU General Public License v2.
-# See /LICENSE for more information.
-#
-
-include $(TOPDIR)/rules.mk
-include $(INCLUDE_DIR)/kernel.mk
-
-PKG_NAME:=u-boot
-PKG_VERSION:=1.1.5
-PKG_RELEASE:=2
-
-PKG_BUILD_DIR:=$(KERNEL_BUILD_DIR)/$(PKG_NAME)-$(PKG_VERSION)
-PKG_SOURCE:=$(PKG_NAME)-$(PKG_VERSION).tar.bz2
-PKG_SOURCE_URL:=ftp://ftp.denx.de/pub/u-boot
-PKG_MD5SUM:=579707c8ecbf1ab4127285d2aac2a9ee
-PKG_TARGETS:=bin
-
-include $(INCLUDE_DIR)/package.mk
-
-define Package/uboot-ifxmips
- SECTION:=boot
- CATEGORY:=Boot Loaders
- DEPENDS:=@TARGET_ifxmips @BROKEN
- TITLE:=U-Boot for Infineon MIPS boards
- URL:=http://www.denx.de/wiki/U-Boot
- MENU:=1
-endef
-
-define Build/Prepare
- $(call Build/Prepare/Default)
- cp -r $(CP_OPTS) ./files/* $(PKG_BUILD_DIR)
- find $(PKG_BUILD_DIR) -name .svn | $(XARGS) rm -rf
-endef
-
-define Package/uboot-ifxmips/config
- source "$(SOURCE)/Config.in"
-endef
-
-UBOOT_CONFIG:=danube
-
-UBOOT_MAKE_OPTS:=\
- CROSS_COMPILE=$(TARGET_CROSS) \
- CROSS_COMPILE_UCLIBC=1 \
- COMPRESS=lzma \
- PLATFORM_CPU=mips32r2 \
- UBOOT_RAM_TEXT_BASE=0xA0400000
-
-A800_FIX:=
-ifeq ($(CONFIG_IFXMIPS_UBOOT_A800),y)
-A800_FIX += -DA800_SWITCH
-endif
-
-define Build/Configure
- $(MAKE) -s -C $(PKG_BUILD_DIR) \
- $(UBOOT_MAKE_OPTS) \
- $(UBOOT_CONFIG)_config
-endef
-
-define Build/Compile
- $(MAKE) -C $(PKG_BUILD_DIR) \
- $(UBOOT_MAKE_OPTS) \
- OWRT_FLAGS="-DTEXT_BASE=0xa0400000 ${A800_FIX}" \
- ifx_all
- $(CP) $(PKG_BUILD_DIR)/u-boot.srec $(PKG_BUILD_DIR)/asc.srec
- $(PKG_BUILD_DIR)/gct \
- $(PKG_BUILD_DIR)/danube_ref_ddr166.conf \
- $(PKG_BUILD_DIR)/asc.srec \
- $(PKG_BUILD_DIR)/u-boot.asc
- $(MAKE) -C $(PKG_BUILD_DIR) \
- $(UBOOT_MAKE_OPTS) \
- OWRT_FLAGS="-DDANUBE_BOOT_FROM_EBU=1 -DTEXT_BASE=0xB0000000 ${A800_FIX}" \
- clean ifx_all
-endef
-
-define Package/uboot-ifxmips/install
- mkdir -p $(1)
- dd if=$(PKG_BUILD_DIR)/u-boot.ifx of=$(1)/u-boot.ifx bs=64k conv=sync
- $(CP) $(PKG_BUILD_DIR)/u-boot.asc $(1)
-endef
-
-$(eval $(call BuildPackage,uboot-ifxmips))
+++ /dev/null
-#
-# (C) Copyright 2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(BOARD).a
-
-COBJS = $(BOARD).o flash.o
-SOBJS = lowlevel_init.o pmuenable.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(COBJS))
-SOBJS := $(addprefix $(obj),$(SOBJS))
-
-$(LIB): $(obj).depend $(OBJS) $(SOBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS) $(SOBJS)
-
-#########################################################################
-
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-/*
-** Copyright (C) 2005 Wu Qi Ming <Qi-Ming.Wu@infineon.com>
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
-** This program is distributed in the hope that it will be useful,
-** but WITHOUT ANY WARRANTY; without even the implied warranty of
-** MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-** GNU General Public License for more details.
-**
-** You should have received a copy of the GNU General Public License
-** along with this program; if not, write to the Free Software
-** Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA.
-*/
-
-To build a u-boot for danube board, user need to do the following things:
-To configure u-boot for a proper board, user need to modify two files accordingly.
-
-To configure u-boot for evaluation board, in danube-uboot/include/configs/danube.h, set
-#define USE_EVALUATION_BOARD
-#undef USE_REFERENCE_BOARD
-and vice-versa.
-
-To let u-boot boot from ebu(flash,e.g), in danube-uboot/include/configus/danube.h, set
-#define DANUBE_BOOT_FROM_EBU
-Otherwise u-boot will be compiled for booting from RAM.
-
-To use DDR RAM running at 111M, in danube-uboot/include/configus/danube.
-h, set
-#define DANUBE_DDR_RAM_111M
-#undef DANUBE_DDR_RAM_166M
-and vice-versa.
-
-To define RAM size of RAM, in danube-uboot/include/configus/danube.
-h, set
-#define RAM_SIZE 0x2000000 /*32M ram*/
-This is an example for a 32M RAM.
-
-
-Besides above settings, user need to change danube-uboot/board/danube/config.mk to set the loading address of u-boot.
-If U-Boot is to boot from EBU(flash), user needs to set
-TEXT_BASE=0xB0000000
-If u-boot is to boot from RAM, user needs to set
-TEXT_BASE=0xa0400000
-
-Use the script gct to build a uart downloadable u-boot image:
-./gct danube_ref_ddr166.conf u-boot.srec u-boot.asc
-
-
-
-
-
+++ /dev/null
-#
-# (C) Copyright 2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-#
-# Danube board with MIPS 24Kec CPU core
-#boot from ebu
-#TEXT_BASE = 0xB0000000
-BOOTSTRAP_TEXT_BASE = 0xB0000000
-
-#boot from ram
-#TEXT_BASE = 0xa0400000
-#TEXT_BASE = 0x807c0000
-
+++ /dev/null
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <command.h>
-#include <asm/addrspace.h>
-#include <asm/danube.h>
-
-#ifdef DANUBE_USE_DDR_RAM
-long int initdram(int board_type)
-{
- return (1024*1024*DANUBE_DDR_RAM_SIZE);
-}
-#else
-extern uint danube_get_cpuclk(void);
-
-static ulong max_sdram_size(void) /* per Chip Select */
-{
- /* The only supported SDRAM data width is 16bit.
- */
-#define CFG_DW 4
-
- /* The only supported number of SDRAM banks is 4.
- */
-#define CFG_NB 4
-
- ulong cfgpb0 = *DANUBE_SDRAM_MC_CFGPB0;
- int cols = cfgpb0 & 0xF;
- int rows = (cfgpb0 & 0xF0) >> 4;
- ulong size = (1 << (rows + cols)) * CFG_DW * CFG_NB;
-
- return size;
-}
-
-/*
- * Check memory range for valid RAM. A simple memory test determines
- * the actually available RAM size between addresses `base' and
- * `base + maxsize'.
- */
-
-static long int dram_size(long int *base, long int maxsize)
-{
- volatile long int *addr;
- ulong cnt, val;
- ulong save[32]; /* to make test non-destructive */
- unsigned char i = 0;
-
- for (cnt = (maxsize / sizeof (long)) >> 1; cnt > 0; cnt >>= 1) {
- addr = base + cnt; /* pointer arith! */
-
- save[i++] = *addr;
- *addr = ~cnt;
- }
-
- /* write 0 to base address */
- addr = base;
- save[i] = *addr;
- *addr = 0;
-
- /* check at base address */
- if ((val = *addr) != 0) {
- *addr = save[i];
- return (0);
- }
-
- for (cnt = 1; cnt < maxsize / sizeof (long); cnt <<= 1) {
- addr = base + cnt; /* pointer arith! */
-
- val = *addr;
- *addr = save[--i];
-
- if (val != (~cnt)) {
- return (cnt * sizeof (long));
- }
- }
- return (maxsize);
-}
-
-long int initdram(int board_type)
-{
- int rows, cols, best_val = *DANUBE_SDRAM_MC_CFGPB0;
- ulong size, max_size = 0;
- ulong our_address;
-
- /* load t9 into our_address */
- asm volatile ("move %0, $25" : "=r" (our_address) :);
-
- /* Can't probe for RAM size unless we are running from Flash.
- * find out whether running from DRAM or Flash.
- */
- if (PHYSADDR(our_address) < PHYSADDR(PHYS_FLASH_1))
- {
- return max_sdram_size();
- }
-
- for (cols = 0x8; cols <= 0xC; cols++)
- {
- for (rows = 0xB; rows <= 0xD; rows++)
- {
- *DANUBE_SDRAM_MC_CFGPB0 = (0x14 << 8) |
- (rows << 4) | cols;
- size = dram_size((ulong *)CFG_SDRAM_BASE,
- max_sdram_size());
-
- if (size > max_size)
- {
- best_val = *DANUBE_SDRAM_MC_CFGPB0;
- max_size = size;
- }
- }
- }
-
- *DANUBE_SDRAM_MC_CFGPB0 = best_val;
- return max_size;
-}
-#endif
-
-int checkboard (void)
-{
- /* No such register in Amazon */
-#if 0
- unsigned long chipid = *AMAZON_MCD_CHIPID;
- int part_num;
-
- puts ("Board: AMAZON ");
- part_num = AMAZON_MCD_CHIPID_PART_NUMBER_GET(chipid);
- switch (part_num) {
- case AMAZON_CHIPID_STANDARD:
- printf ("Standard Version, ");
- break;
- case AMAZON_CHIPID_YANGTSE:
- printf ("Yangtse Version, ");
- break;
- default:
- printf ("Unknown Part Number 0x%x ", part_num);
- break;
- }
-
- printf ("Chip V1.%ld, ", AMAZON_MCD_CHIPID_VERSION_GET(chipid));
-
-
- printf("CPU Speed %d MHz\n", danube_get_cpuclk()/1000000);
-
-#endif
- return 0;
-}
-
-
-/*
- * Disk On Chip (NAND) Millenium initialization.
- * The NAND lives in the CS2* space
- */
-#if (CONFIG_COMMANDS & CFG_CMD_NAND)
-extern void
-nand_probe(ulong physadr);
-
-#define AT91_SMARTMEDIA_BASE 0x40000000 /* physical address to access memory on NCS3 */
-void
-nand_init(void)
-{
- int devtype;
- /* Configure EBU */
-//TODO: should we keep this?
- //Set GPIO23 to be Flash CS1;
- *DANUBE_GPIO_P1_ALTSEL0 = *DANUBE_GPIO_P1_ALTSEL0 | (1<<7);
- *DANUBE_GPIO_P1_ALTSEL1 = *DANUBE_GPIO_P1_ALTSEL1 & ~(1<<7);
- *DANUBE_GPIO_P1_DIR = *DANUBE_GPIO_P1_DIR | (1<<7) ;
- *DANUBE_GPIO_P1_OD = *DANUBE_GPIO_P1_OD | (1<<7) ;
-
- *EBU_ADDR_SEL_1 = (NAND_BASE_ADDRESS&0x1fffff00)|0x31;
- /* byte swap;minimum delay*/
- *EBU_CON_1 = 0x40C155;
- *EBU_NAND_CON = 0x000005F3;
-
- /* Set bus signals to inactive */
- NAND_READY_CLEAR;
-
- NAND_CE_CLEAR;
- nand_probe(NAND_BASE_ADDRESS);
-
-
-
- //nand_probe(AT91_SMARTMEDIA_BASE);
-}
-#endif
-
-
-
+++ /dev/null
-/* Settings for Denali DDR SDRAM controller */
-/* Optimise for Danube Eval Board DDR 167 Mhz - by Ng Aik Ann 29th April */
-#define MC_DC0_VALUE 0x1B1B
-#define MC_DC1_VALUE 0x0
-#define MC_DC2_VALUE 0x0
-#define MC_DC3_VALUE 0x0
-#define MC_DC4_VALUE 0x0
-#define MC_DC5_VALUE 0x200
-#define MC_DC6_VALUE 0x605
-#define MC_DC7_VALUE 0x303
-#define MC_DC8_VALUE 0x102
-#define MC_DC9_VALUE 0x70a
-#define MC_DC10_VALUE 0x203
-#define MC_DC11_VALUE 0xc02
-#define MC_DC12_VALUE 0x1C8
-#define MC_DC13_VALUE 0x1
-#define MC_DC14_VALUE 0x0
-#define MC_DC15_VALUE 0xf3c
-#define MC_DC16_VALUE 0xC800
-#define MC_DC17_VALUE 0xd
-#define MC_DC18_VALUE 0x300
-#define MC_DC19_VALUE 0x200
-#define MC_DC20_VALUE 0xA03
-#define MC_DC21_VALUE 0x1d00
-#define MC_DC22_VALUE 0x1d1d
-#define MC_DC23_VALUE 0x0
-#define MC_DC24_VALUE 0x5e /* was 0x7f */
-#define MC_DC25_VALUE 0x0
-#define MC_DC26_VALUE 0x0
-#define MC_DC27_VALUE 0x0
-#define MC_DC28_VALUE 0x510
-#define MC_DC29_VALUE 0x2d89
-#define MC_DC30_VALUE 0x8300
-#define MC_DC31_VALUE 0x0
-#define MC_DC32_VALUE 0x0
-#define MC_DC33_VALUE 0x0
-#define MC_DC34_VALUE 0x0
-#define MC_DC35_VALUE 0x0
-#define MC_DC36_VALUE 0x0
-#define MC_DC37_VALUE 0x0
-#define MC_DC38_VALUE 0x0
-#define MC_DC39_VALUE 0x0
-#define MC_DC40_VALUE 0x0
-#define MC_DC41_VALUE 0x0
-#define MC_DC42_VALUE 0x0
-#define MC_DC43_VALUE 0x0
-#define MC_DC44_VALUE 0x0
-#define MC_DC45_VALUE 0x500
-//#define MC_DC45_VALUE 0x400
-#define MC_DC46_VALUE 0x0
+++ /dev/null
-/* Settings for Denali DDR SDRAM controller */
-/* Optimise for Danube Eval Board DDR 167 Mhz - by Ng Aik Ann 29th April */
-#define MC_DC0_VALUE 0x1B1B
-#define MC_DC1_VALUE 0x0
-#define MC_DC2_VALUE 0x0
-#define MC_DC3_VALUE 0x0
-#define MC_DC4_VALUE 0x0
-#define MC_DC5_VALUE 0x200
-#define MC_DC6_VALUE 0x605
-#define MC_DC7_VALUE 0x303
-#define MC_DC8_VALUE 0x102
-#define MC_DC9_VALUE 0x70a
-#define MC_DC10_VALUE 0x203
-#define MC_DC11_VALUE 0xc02
-#define MC_DC12_VALUE 0x1C8
-#define MC_DC13_VALUE 0x1
-#define MC_DC14_VALUE 0x0
-#define MC_DC15_VALUE 0xf3c /* WDQS tuning for clk_wr*/
-#define MC_DC16_VALUE 0xC800
-#define MC_DC17_VALUE 0xd
-#define MC_DC18_VALUE 0x300
-#define MC_DC19_VALUE 0x200
-#define MC_DC20_VALUE 0xA03 /* A04 for reference board, A03 for Eval board */
-#define MC_DC21_VALUE 0x1800
-#define MC_DC22_VALUE 0x1818
-#define MC_DC23_VALUE 0x0
-#define MC_DC24_VALUE 0x5e /* WDQS Tuning for DQS */
-#define MC_DC25_VALUE 0x0
-#define MC_DC26_VALUE 0x0
-#define MC_DC27_VALUE 0x0
-#define MC_DC28_VALUE 0x510
-#define MC_DC29_VALUE 0x2d89
-#define MC_DC30_VALUE 0x8300
-#define MC_DC31_VALUE 0x0
-#define MC_DC32_VALUE 0x0
-#define MC_DC33_VALUE 0x0
-#define MC_DC34_VALUE 0x0
-#define MC_DC35_VALUE 0x0
-#define MC_DC36_VALUE 0x0
-#define MC_DC37_VALUE 0x0
-#define MC_DC38_VALUE 0x0
-#define MC_DC39_VALUE 0x0
-#define MC_DC40_VALUE 0x0
-#define MC_DC41_VALUE 0x0
-#define MC_DC42_VALUE 0x0
-#define MC_DC43_VALUE 0x0
-#define MC_DC44_VALUE 0x0
-#define MC_DC45_VALUE 0x500
-//#define MC_DC45_VALUE 0x400
-#define MC_DC46_VALUE 0x0
+++ /dev/null
-/* Settings for Denali DDR SDRAM controller */
-/* Optimise for Danube Eval Board DDR 167 Mhz - by Ng Aik Ann 29th April */
-#define MC_DC0_VALUE 0x1B1B
-#define MC_DC1_VALUE 0x0
-#define MC_DC2_VALUE 0x0
-#define MC_DC3_VALUE 0x0
-#define MC_DC4_VALUE 0x0
-#define MC_DC5_VALUE 0x200
-#define MC_DC6_VALUE 0x605
-#define MC_DC7_VALUE 0x303
-#define MC_DC8_VALUE 0x102
-#define MC_DC9_VALUE 0x70a
-#define MC_DC10_VALUE 0x203
-#define MC_DC11_VALUE 0xc02
-#define MC_DC12_VALUE 0x1C8
-#define MC_DC13_VALUE 0x1
-#define MC_DC14_VALUE 0x0
-#define MC_DC15_VALUE 0xf3c /* WDQS tuning for clk_wr*/
-#define MC_DC16_VALUE 0xC800
-#define MC_DC17_VALUE 0xd
-#define MC_DC18_VALUE 0x300
-#define MC_DC19_VALUE 0x200
-#define MC_DC20_VALUE 0xA03 /* A04 for reference board, A03 for Eval board */
-#define MC_DC21_VALUE 0x1800
-#define MC_DC22_VALUE 0x1818
-#define MC_DC23_VALUE 0x0
-#define MC_DC24_VALUE 0x5e /* WDQS Tuning for DQS */
-#define MC_DC25_VALUE 0x0
-#define MC_DC26_VALUE 0x0
-#define MC_DC27_VALUE 0x0
-#define MC_DC28_VALUE 0x510
-#define MC_DC29_VALUE 0x2d89
-#define MC_DC30_VALUE 0x8300
-#define MC_DC31_VALUE 0x0
-#define MC_DC32_VALUE 0x0
-#define MC_DC33_VALUE 0x0
-#define MC_DC34_VALUE 0x0
-#define MC_DC35_VALUE 0x0
-#define MC_DC36_VALUE 0x0
-#define MC_DC37_VALUE 0x0
-#define MC_DC38_VALUE 0x0
-#define MC_DC39_VALUE 0x0
-#define MC_DC40_VALUE 0x0
-#define MC_DC41_VALUE 0x0
-#define MC_DC42_VALUE 0x0
-#define MC_DC43_VALUE 0x0
-#define MC_DC44_VALUE 0x0
-#define MC_DC45_VALUE 0x500
-//#define MC_DC45_VALUE 0x400
-#define MC_DC46_VALUE 0x0
+++ /dev/null
-/* Settings for Denali DDR SDRAM controller */
-/* Optimise for Danube Ref Board DDR 166 Mhz - by Ng Aik Ann 29th April */
-#define MC_DC0_VALUE 0x1B1B
-#define MC_DC1_VALUE 0x0
-#define MC_DC2_VALUE 0x0
-#define MC_DC3_VALUE 0x0
-#define MC_DC4_VALUE 0x0
-#define MC_DC5_VALUE 0x200
-#define MC_DC6_VALUE 0x605
-#define MC_DC7_VALUE 0x303
-#define MC_DC8_VALUE 0x102
-#define MC_DC9_VALUE 0x70a
-#define MC_DC10_VALUE 0x203
-#define MC_DC11_VALUE 0xa02
-#define MC_DC12_VALUE 0x1C8
-#define MC_DC13_VALUE 0x0
-#define MC_DC14_VALUE 0x0
-#define MC_DC15_VALUE 0xf3c /* WDQS tuning for clk_wr*/
-#define MC_DC16_VALUE 0xC800
-#define MC_DC17_VALUE 0xd
-#define MC_DC18_VALUE 0x300
-#define MC_DC19_VALUE 0x200
-#define MC_DC20_VALUE 0xA04 /* A04 for reference board, A03 for Eval board */
-#define MC_DC21_VALUE 0x1200
-#define MC_DC22_VALUE 0x1212
-#define MC_DC23_VALUE 0x0
-#define MC_DC24_VALUE 0x62 /* WDQS Tuning for DQS */
-#define MC_DC25_VALUE 0x0
-#define MC_DC26_VALUE 0x0
-#define MC_DC27_VALUE 0x0
-#define MC_DC28_VALUE 0x510
-#define MC_DC29_VALUE 0x4e20
-#define MC_DC30_VALUE 0x8300
-#define MC_DC31_VALUE 0x0
-#define MC_DC32_VALUE 0x0
-#define MC_DC33_VALUE 0x0
-#define MC_DC34_VALUE 0x0
-#define MC_DC35_VALUE 0x0
-#define MC_DC36_VALUE 0x0
-#define MC_DC37_VALUE 0x0
-#define MC_DC38_VALUE 0x0
-#define MC_DC39_VALUE 0x0
-#define MC_DC40_VALUE 0x0
-#define MC_DC41_VALUE 0x0
-#define MC_DC42_VALUE 0x0
-#define MC_DC43_VALUE 0x0
-#define MC_DC44_VALUE 0x0
-#define MC_DC45_VALUE 0x500
-//#define MC_DC45_VALUE 0x400
-#define MC_DC46_VALUE 0x0
+++ /dev/null
-/* Settings for Denali DDR SDRAM controller */
-/* Optimise for Samsung DDR K4H561638H Danube Ref Board DDR 166 Mhz - by Ng Aik Ann 27th Nov 2006 */
-
-#define MC_DC0_VALUE 0x1B1B
-#define MC_DC1_VALUE 0x0
-#define MC_DC2_VALUE 0x0
-#define MC_DC3_VALUE 0x0
-#define MC_DC4_VALUE 0x0
-#define MC_DC5_VALUE 0x200
-#define MC_DC6_VALUE 0x605
-#define MC_DC7_VALUE 0x303
-#define MC_DC8_VALUE 0x102
-#define MC_DC9_VALUE 0x70a
-#define MC_DC10_VALUE 0x203
-#define MC_DC11_VALUE 0xc02
-#define MC_DC12_VALUE 0x1C8
-#define MC_DC13_VALUE 0x1
-#define MC_DC14_VALUE 0x0
-#define MC_DC15_VALUE 0x120 /* WDQS tuning for clk_wr*/
-#define MC_DC16_VALUE 0xC800
-#define MC_DC17_VALUE 0xd
-#define MC_DC18_VALUE 0x301
-#define MC_DC19_VALUE 0x200
-#define MC_DC20_VALUE 0xA04 /* A04 for reference board, A03 for Eval board */
-#define MC_DC21_VALUE 0x1400
-#define MC_DC22_VALUE 0x1414
-#define MC_DC23_VALUE 0x0
-#define MC_DC24_VALUE 0x4e /* WDQS Tuning for DQS */
-#define MC_DC25_VALUE 0x0
-#define MC_DC26_VALUE 0x0
-#define MC_DC27_VALUE 0x0
-#define MC_DC28_VALUE 0x510
-#define MC_DC29_VALUE 0x2d93
-#define MC_DC30_VALUE 0x8235
-#define MC_DC31_VALUE 0x0
-#define MC_DC32_VALUE 0x0
-#define MC_DC33_VALUE 0x0
-#define MC_DC34_VALUE 0x0
-#define MC_DC35_VALUE 0x0
-#define MC_DC36_VALUE 0x0
-#define MC_DC37_VALUE 0x0
-#define MC_DC38_VALUE 0x0
-#define MC_DC39_VALUE 0x0
-#define MC_DC40_VALUE 0x0
-#define MC_DC41_VALUE 0x0
-#define MC_DC42_VALUE 0x0
-#define MC_DC43_VALUE 0x0
-#define MC_DC44_VALUE 0x0
-#define MC_DC45_VALUE 0x500
-//#define MC_DC45_VALUE 0x400
-#define MC_DC46_VALUE 0x0
+++ /dev/null
-/* Settings for Denali DDR SDRAM controller */
-/* Optimise for Danube Eval Board DDR 167 Mhz - by Ng Aik Ann 29th April */
-#define MC_DC0_VALUE 0x1B1B
-#define MC_DC1_VALUE 0x0
-#define MC_DC2_VALUE 0x0
-#define MC_DC3_VALUE 0x0
-#define MC_DC4_VALUE 0x0
-#define MC_DC5_VALUE 0x200
-#define MC_DC6_VALUE 0x605
-#define MC_DC7_VALUE 0x303
-#define MC_DC8_VALUE 0x102
-#define MC_DC9_VALUE 0x70a
-#define MC_DC10_VALUE 0x203
-#define MC_DC11_VALUE 0xc02
-#define MC_DC12_VALUE 0x1C8
-#define MC_DC13_VALUE 0x1
-#define MC_DC14_VALUE 0x0
-#define MC_DC15_VALUE 0xf3c /* WDQS tuning for clk_wr*/
-#define MC_DC16_VALUE 0xC800
-#define MC_DC17_VALUE 0xd
-#define MC_DC18_VALUE 0x300
-#define MC_DC19_VALUE 0x200
-#define MC_DC20_VALUE 0xA03 /* A04 for reference board, A03 for Eval board */
-#define MC_DC21_VALUE 0x1800
-#define MC_DC22_VALUE 0x1818
-#define MC_DC23_VALUE 0x0
-#define MC_DC24_VALUE 0x5e /* WDQS Tuning for DQS */
-#define MC_DC25_VALUE 0x0
-#define MC_DC26_VALUE 0x0
-#define MC_DC27_VALUE 0x0
-#define MC_DC28_VALUE 0x510
-#define MC_DC29_VALUE 0x2d89
-#define MC_DC30_VALUE 0x8300
-#define MC_DC31_VALUE 0x0
-#define MC_DC32_VALUE 0x0
-#define MC_DC33_VALUE 0x0
-#define MC_DC34_VALUE 0x0
-#define MC_DC35_VALUE 0x0
-#define MC_DC36_VALUE 0x0
-#define MC_DC37_VALUE 0x0
-#define MC_DC38_VALUE 0x0
-#define MC_DC39_VALUE 0x0
-#define MC_DC40_VALUE 0x0
-#define MC_DC41_VALUE 0x0
-#define MC_DC42_VALUE 0x0
-#define MC_DC43_VALUE 0x0
-#define MC_DC44_VALUE 0x0
-#define MC_DC45_VALUE 0x500
-//#define MC_DC45_VALUE 0x400
-#define MC_DC46_VALUE 0x0
+++ /dev/null
-/* Settings for Denali DDR SDRAM controller */
-/* Optimise for Danube Eval Board DDR 167 Mhz - by Ng Aik Ann 29th April */
-#define MC_DC0_VALUE 0x1B1B
-#define MC_DC1_VALUE 0x0
-#define MC_DC2_VALUE 0x0
-#define MC_DC3_VALUE 0x0
-#define MC_DC4_VALUE 0x0
-#define MC_DC5_VALUE 0x200
-#define MC_DC6_VALUE 0x605
-#define MC_DC7_VALUE 0x303
-#define MC_DC8_VALUE 0x102
-#define MC_DC9_VALUE 0x70a
-#define MC_DC10_VALUE 0x203
-#define MC_DC11_VALUE 0xc02
-#define MC_DC12_VALUE 0x1C8
-#define MC_DC13_VALUE 0x1
-#define MC_DC14_VALUE 0x0
-#define MC_DC15_VALUE 0xf3c /* WDQS tuning for clk_wr*/
-#define MC_DC16_VALUE 0xC800
-#define MC_DC17_VALUE 0xd
-#define MC_DC18_VALUE 0x300
-#define MC_DC19_VALUE 0x200
-#define MC_DC20_VALUE 0xA03 /* A04 for reference board, A03 for Eval board */
-#define MC_DC21_VALUE 0x1800
-#define MC_DC22_VALUE 0x1818
-#define MC_DC23_VALUE 0x0
-#define MC_DC24_VALUE 0x5e /* WDQS Tuning for DQS */
-#define MC_DC25_VALUE 0x0
-#define MC_DC26_VALUE 0x0
-#define MC_DC27_VALUE 0x0
-#define MC_DC28_VALUE 0x510
-#define MC_DC29_VALUE 0x2d89
-#define MC_DC30_VALUE 0x8300
-#define MC_DC31_VALUE 0x0
-#define MC_DC32_VALUE 0x0
-#define MC_DC33_VALUE 0x0
-#define MC_DC34_VALUE 0x0
-#define MC_DC35_VALUE 0x0
-#define MC_DC36_VALUE 0x0
-#define MC_DC37_VALUE 0x0
-#define MC_DC38_VALUE 0x0
-#define MC_DC39_VALUE 0x0
-#define MC_DC40_VALUE 0x0
-#define MC_DC41_VALUE 0x0
-#define MC_DC42_VALUE 0x0
-#define MC_DC43_VALUE 0x0
-#define MC_DC44_VALUE 0x0
-#define MC_DC45_VALUE 0x500
-//#define MC_DC45_VALUE 0x400
-#define MC_DC46_VALUE 0x0
+++ /dev/null
-/* Settings for Denali DDR SDRAM controller */
-/* Optimise for PSC DDR A2S56D40CTP for Danube Ref Board DDR 166 Mhz - by Ng Aik Ann 27th Nov 2006 */
-
-#define MC_DC0_VALUE 0x1B1B
-#define MC_DC1_VALUE 0x0
-#define MC_DC2_VALUE 0x0
-#define MC_DC3_VALUE 0x0
-#define MC_DC4_VALUE 0x0
-#define MC_DC5_VALUE 0x200
-#define MC_DC6_VALUE 0x605
-#define MC_DC7_VALUE 0x303
-#define MC_DC8_VALUE 0x102
-#define MC_DC9_VALUE 0x70a
-#define MC_DC10_VALUE 0x203
-#define MC_DC11_VALUE 0xc02
-#define MC_DC12_VALUE 0x1C8
-#define MC_DC13_VALUE 0x1
-#define MC_DC14_VALUE 0x0
-#define MC_DC15_VALUE 0x120 /* WDQS tuning for clk_wr*/
-#define MC_DC16_VALUE 0xC800
-#define MC_DC17_VALUE 0xd
-#define MC_DC18_VALUE 0x301
-#define MC_DC19_VALUE 0x200
-#define MC_DC20_VALUE 0xA04 /* A04 for reference board, A03 for Eval board */
-#define MC_DC21_VALUE 0x1700
-#define MC_DC22_VALUE 0x1717
-#define MC_DC23_VALUE 0x0
-#define MC_DC24_VALUE 0x52 /* WDQS Tuning for DQS */
-#define MC_DC25_VALUE 0x0
-#define MC_DC26_VALUE 0x0
-#define MC_DC27_VALUE 0x0
-#define MC_DC28_VALUE 0x510
-#define MC_DC29_VALUE 0x4e20
-#define MC_DC30_VALUE 0x8235
-#define MC_DC31_VALUE 0x0
-#define MC_DC32_VALUE 0x0
-#define MC_DC33_VALUE 0x0
-#define MC_DC34_VALUE 0x0
-#define MC_DC35_VALUE 0x0
-#define MC_DC36_VALUE 0x0
-#define MC_DC37_VALUE 0x0
-#define MC_DC38_VALUE 0x0
-#define MC_DC39_VALUE 0x0
-#define MC_DC40_VALUE 0x0
-#define MC_DC41_VALUE 0x0
-#define MC_DC42_VALUE 0x0
-#define MC_DC43_VALUE 0x0
-#define MC_DC44_VALUE 0x0
-#define MC_DC45_VALUE 0x500
-//#define MC_DC45_VALUE 0x400
-#define MC_DC46_VALUE 0x0
+++ /dev/null
-/* Settings for Denali DDR SDRAM controller */
-/* Optimise for Danube Ref Board DDR 166 Mhz - by Ng Aik Ann 29th April */
-#define MC_DC0_VALUE 0x1B1B
-#define MC_DC1_VALUE 0x0
-#define MC_DC2_VALUE 0x0
-#define MC_DC3_VALUE 0x0
-#define MC_DC4_VALUE 0x0
-#define MC_DC5_VALUE 0x200
-#define MC_DC6_VALUE 0x605
-#define MC_DC7_VALUE 0x303
-#define MC_DC8_VALUE 0x102
-#define MC_DC9_VALUE 0x70a
-#define MC_DC10_VALUE 0x203
-#define MC_DC11_VALUE 0xc02
-#define MC_DC12_VALUE 0x1C8
-#define MC_DC13_VALUE 0x1
-#define MC_DC14_VALUE 0x0
-#define MC_DC15_VALUE 0xf3c /* WDQS tuning for clk_wr*/
-#define MC_DC16_VALUE 0xC800
-#define MC_DC17_VALUE 0xd
-#define MC_DC18_VALUE 0x300
-#define MC_DC19_VALUE 0x200
-#define MC_DC20_VALUE 0xA04 /* A04 for reference board, A03 for Eval board */
-#define MC_DC21_VALUE 0x1200
-#define MC_DC22_VALUE 0x1212
-#define MC_DC23_VALUE 0x0
-#define MC_DC24_VALUE 0x5e /* WDQS Tuning for DQS */
-#define MC_DC25_VALUE 0x0
-#define MC_DC26_VALUE 0x0
-#define MC_DC27_VALUE 0x0
-#define MC_DC28_VALUE 0x510
-#define MC_DC29_VALUE 0x2d89
-#define MC_DC30_VALUE 0x8300
-#define MC_DC31_VALUE 0x0
-#define MC_DC32_VALUE 0x0
-#define MC_DC33_VALUE 0x0
-#define MC_DC34_VALUE 0x0
-#define MC_DC35_VALUE 0x0
-#define MC_DC36_VALUE 0x0
-#define MC_DC37_VALUE 0x0
-#define MC_DC38_VALUE 0x0
-#define MC_DC39_VALUE 0x0
-#define MC_DC40_VALUE 0x0
-#define MC_DC41_VALUE 0x0
-#define MC_DC42_VALUE 0x0
-#define MC_DC43_VALUE 0x0
-#define MC_DC44_VALUE 0x0
-#define MC_DC45_VALUE 0x500
-//#define MC_DC45_VALUE 0x400
-#define MC_DC46_VALUE 0x0
+++ /dev/null
-/* Settings for Denali DDR SDRAM controller */
-/* Optimise for Danube Ref Board DDR 166 Mhz - by Ng Aik Ann 29th April */
-#define MC_DC0_VALUE 0x1B1B
-#define MC_DC1_VALUE 0x0
-#define MC_DC2_VALUE 0x0
-#define MC_DC3_VALUE 0x0
-#define MC_DC4_VALUE 0x0
-#define MC_DC5_VALUE 0x200
-#define MC_DC6_VALUE 0x605
-#define MC_DC7_VALUE 0x303
-#define MC_DC8_VALUE 0x102
-#define MC_DC9_VALUE 0x70a
-#define MC_DC10_VALUE 0x203
-#define MC_DC11_VALUE 0xc02
-#define MC_DC12_VALUE 0x1C8
-#define MC_DC13_VALUE 0x1
-#define MC_DC14_VALUE 0x0
-#define MC_DC15_VALUE 0xf3c /* WDQS tuning for clk_wr*/
-#define MC_DC16_VALUE 0xC800
-#define MC_DC17_VALUE 0xd
-#define MC_DC18_VALUE 0x300
-#define MC_DC19_VALUE 0x200
-#define MC_DC20_VALUE 0xA04 /* A04 for reference board, A03 for Eval board */
-#define MC_DC21_VALUE 0xd00
-#define MC_DC22_VALUE 0xd0d
-#define MC_DC23_VALUE 0x0
-#define MC_DC24_VALUE 0x62 /* WDQS Tuning for DQS */
-#define MC_DC25_VALUE 0x0
-#define MC_DC26_VALUE 0x0
-#define MC_DC27_VALUE 0x0
-#define MC_DC28_VALUE 0x510
-#define MC_DC29_VALUE 0x2d89
-#define MC_DC30_VALUE 0x8300
-#define MC_DC31_VALUE 0x0
-#define MC_DC32_VALUE 0x0
-#define MC_DC33_VALUE 0x0
-#define MC_DC34_VALUE 0x0
-#define MC_DC35_VALUE 0x0
-#define MC_DC36_VALUE 0x0
-#define MC_DC37_VALUE 0x0
-#define MC_DC38_VALUE 0x0
-#define MC_DC39_VALUE 0x0
-#define MC_DC40_VALUE 0x0
-#define MC_DC41_VALUE 0x0
-#define MC_DC42_VALUE 0x0
-#define MC_DC43_VALUE 0x0
-#define MC_DC44_VALUE 0x0
-#define MC_DC45_VALUE 0x500
-//#define MC_DC45_VALUE 0x400
-#define MC_DC46_VALUE 0x0
+++ /dev/null
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-//joelin 10/07/2004 for MXIC MX29LV320ABTC-90
-#include <common.h>
-#include <asm/danube.h>
-
-/*
-#ifdef CONFIG_AMAZON
- #define FLASH_DELAY {int i; \
- for(i=0;i<800;i++) \
- *((volatile u32 *)CFG_SDRAM_BASE_UNCACHE); \
- }
-#else
- #define FLASH_DELAY
-#endif
-*/
-
-flash_info_t flash_info[CFG_MAX_FLASH_BANKS]; /* info for FLASH chips */
-
-/* NOTE - CONFIG_FLASH_16BIT means the CPU interface is 16-bit, it
- * has nothing to do with the flash chip being 8-bit or 16-bit.
- */
-#ifdef CONFIG_FLASH_16BIT
-typedef unsigned short FLASH_PORT_WIDTH;
-typedef volatile unsigned short FLASH_PORT_WIDTHV;
-#define FLASH_ID_MASK 0xFFFF
-#else
-typedef unsigned long FLASH_PORT_WIDTH;
-typedef volatile unsigned long FLASH_PORT_WIDTHV;
-#define FLASH_ID_MASK 0xFFFFFFFF
-#endif
-
-#define FPW FLASH_PORT_WIDTH
-#define FPWV FLASH_PORT_WIDTHV
-
-#define ORMASK(size) ((-size) & OR_AM_MSK) // 0xffff8000
-
-#if 0
-#define FLASH_CYCLE1 0x0555
-#define FLASH_CYCLE2 0x02aa
-#else
-#define FLASH_CYCLE1 0x0554 //joelin for MX29LV320AT/B 0x0555
-#define FLASH_CYCLE2 0x02ab //joelin for MX29LV320AT/B 0x02aa
-#endif
-
-/*-----------------------------------------------------------------------
- * Functions
- */
-static ulong flash_get_size(FPWV *addr, flash_info_t *info);
-static void flash_reset(flash_info_t *info);
-static int write_word_intel(flash_info_t *info, FPWV *dest, FPW data);
-static int write_word_amd(flash_info_t *info, FPWV *dest, FPW data);
-static void flash_get_offsets(ulong base, flash_info_t *info);
-static flash_info_t *flash_get_info(ulong base);
-
-/*-----------------------------------------------------------------------
- * flash_init()
- *
- * sets up flash_info and returns size of FLASH (bytes)
- */
-unsigned long flash_init (void)
-{
- unsigned long size = 0;
- int i;
-
- /* Init: no FLASHes known */
- for (i=0; i < CFG_MAX_FLASH_BANKS; ++i) { // 1 bank
- ulong flashbase = (i == 0) ? PHYS_FLASH_1 : PHYS_FLASH_2; // 0xb0000000, 0xb4000000
-
- volatile ulong * buscon = (ulong *)
- ((i == 0) ? DANUBE_EBU_BUSCON0 : DANUBE_EBU_BUSCON1);
-
- /* Disable write protection */
-// *buscon &= ~AMAZON_EBU_BUSCON0_WRDIS;
- /* Enable write protection */
- *buscon |= DANUBE_EBU_BUSCON0_WRDIS;
-
-#if 1
- memset(&flash_info[i], 0, sizeof(flash_info_t));
-#endif
-
- flash_info[i].size =
- flash_get_size((FPW *)flashbase, &flash_info[i]);
-
- if (flash_info[i].flash_id == FLASH_UNKNOWN) {
- printf ("## Unknown FLASH on Bank %d - Size = 0x%08lx\n",
- i, flash_info[i].size);
- }
-
- size += flash_info[i].size;
- }
-
-#if CFG_MONITOR_BASE >= CFG_FLASH_BASE // TEXT_BASE >= 0xB3000000
- /* monitor protection ON by default */ /* only use software protection, info->protect[i]=0/1 */
-/* flash_protect(FLAG_PROTECT_SET,
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
- flash_get_info(CFG_MONITOR_BASE));
-*/
- flash_protect(FLAG_PROTECT_CLEAR, // clear protect
- CFG_MONITOR_BASE,
- CFG_MONITOR_BASE+CFG_MONITOR_LEN-1,
- flash_get_info(CFG_MONITOR_BASE));
-
-#endif
-
-#ifdef CFG_ENV_IS_IN_FLASH /* 1 */
- /* ENV protection ON by default */
-/* flash_protect(FLAG_PROTECT_SET,
- CFG_ENV_ADDR,
- CFG_ENV_ADDR+CFG_ENV_SIZE-1,
- flash_get_info(CFG_ENV_ADDR));
-*/
- flash_protect(FLAG_PROTECT_CLEAR,
- CFG_ENV_ADDR,
- CFG_ENV_ADDR+CFG_ENV_SIZE-1,
- flash_get_info(CFG_ENV_ADDR));
-
-#endif
-
-
- return size;
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_reset(flash_info_t *info)
-{
- FPWV *base = (FPWV *)(info->start[0]);
-
- (*DANUBE_EBU_BUSCON0)&=(~0x80000000); // enable writing
- (*DANUBE_EBU_BUSCON1)&=(~0x80000000); // enable writing
- (*EBU_NAND_CON)=0;
- /* Put FLASH back in read mode */
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL){
- *base = (FPW)0x00FF00FF; /* Intel Read Mode */
- asm("SYNC");
- }
- else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD){
- *base = (FPW)0x00F000F0; /* AMD Read Mode */
- asm("SYNC"); //joelin
- }
- else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_MX){
- *base = (FPW)0x00F000F0; /* MXIC Read Mode */
- asm("SYNC"); //joelin
- }
-
- (*DANUBE_EBU_BUSCON0)|=0x80000000; // disable writing
- (*DANUBE_EBU_BUSCON1)|=0x80000000; // disable writing
-
-}
-
-/*-----------------------------------------------------------------------
- */
-static void flash_get_offsets (ulong base, flash_info_t *info)
-{
- int i;
-
- /* set up sector start address table */
- if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL
- && (info->flash_id & FLASH_BTYPE)) {
- int bootsect_size; /* number of bytes/boot sector */
- int sect_size; /* number of bytes/regular sector */
-
- bootsect_size = 0x00002000 * (sizeof(FPW)/2);
- sect_size = 0x00010000 * (sizeof(FPW)/2);
-
- /* set sector offsets for bottom boot block type */
- for (i = 0; i < 8; ++i) {
- info->start[i] = base + (i * bootsect_size);
- }
- for (i = 8; i < info->sector_count; i++) {
- info->start[i] = base + ((i - 7) * sect_size);
- }
- }
- else if ((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD
- && (info->flash_id & FLASH_TYPEMASK) == FLASH_AM640U) {
-
- int sect_size; /* number of bytes/sector */
-
- sect_size = 0x00010000 * (sizeof(FPW)/2);
-
- /* set up sector start address table (uniform sector type) */
- for( i = 0; i < info->sector_count; i++ )
- info->start[i] = base + (i * sect_size);
- }
- else if(((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
- && ((info->flash_id & FLASH_TYPEMASK)==FLASH_28F128J3A)){
- int sect_size;
- sect_size = 0x20000;
- for(i=0;i < info->sector_count; i++)
- info->start[i]= base + (i*sect_size);
- }
- else if(((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL)
- && ((info->flash_id & FLASH_TYPEMASK)==FLASH_28F320J3A)){
- int sect_size;
- sect_size = 0x20000;
- for(i=0;i < info->sector_count; i++)
- info->start[i]= base + (i*sect_size);
- }
-//joelin add for MX29LV320AB-- SA0~SA7:sector size=8K bytes ,SA9~SA70 :sector size=64k bytes
- else if(((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_MX)
- && ((info->flash_id & FLASH_TYPEMASK)==FLASH_29LV320AB)){
- int bootsect_size; /* number of bytes/boot sector */
- int sect_size; /* number of bytes/regular sector */
-
- bootsect_size = 0x00002000 * (sizeof(FPW)/2);
- sect_size = 0x00010000 * (sizeof(FPW)/2);
-
- /* set sector offsets for bottom boot block type */
- for (i = 0; i < 8; ++i) {
- info->start[i] = base + (i * bootsect_size);
- }
- for (i = 8; i < info->sector_count; i++) {
- info->start[i] = base + ((i - 7) * sect_size);
- }
- }
- else if(((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_AMD)
- && ((info->flash_id & FLASH_TYPEMASK)==FLASH_29LV320B)){
- int bootsect_size; /* number of bytes/boot sector */
- int sect_size; /* number of bytes/regular sector */
-
- bootsect_size = 0x00002000 * (sizeof(FPW)/2);
- sect_size = 0x00010000 * (sizeof(FPW)/2);
-
- /* set sector offsets for bottom boot block type */
- for (i = 0; i < 8; ++i) {
- info->start[i] = base + (i * bootsect_size);
- }
- for (i = 8; i < info->sector_count; i++) {
- info->start[i] = base + ((i - 7) * sect_size);
- }
- }
-//joelin add for MX29LV160BB-- SA0=16K,SA1,SA2=8K,SA3=32K bytes ,SA4~SA34 :sector size=64k bytes
- else if(((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_MX)
- && ((info->flash_id & FLASH_TYPEMASK)==FLASH_29LV160BB)){
- int bootsect_size; /* number of bytes/boot sector */
- int sect_size; /* number of bytes/regular sector */
-
- bootsect_size = 0x00002000 * (sizeof(FPW)/2);
- sect_size = 0x00010000 * (sizeof(FPW)/2);
-/* set sector offsets for bottom boot block type */
-//MX29LV160BB
- info->start[0] = base ; //SA0=16K bytes
- info->start[1] = info->start[0] + (1 * 0x00004000 * (sizeof(FPW)/2)); //SA1=8K bytes
- info->start[2] = info->start[1] + (1 * 0x00002000 * (sizeof(FPW)/2)); //SA2=8K bytes
- info->start[3] = info->start[2] + (1 * 0x00002000 * (sizeof(FPW)/2)); //SA3=32K bytes
-
- for (i = 4; i < info->sector_count; i++) {
- info->start[i] = base + ((i - 3) * sect_size);
- }
- }
-//liupeng add for MX29LV640BB-- SA0~SA7:sector size=8k bytes ,SA8~SA134 :sector size=64k bytes
- else if(((info->flash_id & FLASH_VENDMASK) == FLASH_MAN_MX)
- && ((info->flash_id & FLASH_TYPEMASK)==FLASH_29LV640BB)){
- int bootsect_size; /* number of bytes/boot sector */
- int sect_size; /* number of bytes/regular sector */
-
- bootsect_size = 0x00002000 * (sizeof(FPW)/2);
- sect_size = 0x00010000 * (sizeof(FPW)/2);
-
- /* set sector offsets for bottom boot block type */
- for (i = 0; i < 8; ++i) {
- info->start[i] = base + (i * bootsect_size);
- }
- for (i = 8; i < info->sector_count; i++) {
- info->start[i] = base + ((i - 7) * sect_size);
- }
- }
- else{
- printf("flash get offsets fail\n");
- }
-}
-
-/*-----------------------------------------------------------------------
- */
-
-static flash_info_t *flash_get_info(ulong base)
-{
- int i;
- flash_info_t * info;
-
- for (i = 0; i < CFG_MAX_FLASH_BANKS; i ++) {
- info = & flash_info[i];
- if (info->start[0] <= base && base < info->start[0] + info->size)
- break;
- }
-
- return i == CFG_MAX_FLASH_BANKS ? 0 : info;
-}
-
-/*-----------------------------------------------------------------------
- */
-
-void flash_print_info (flash_info_t *info)
-{
- int i;
- uchar *boottype;
- uchar *bootletter;
- uchar *fmt;
- uchar botbootletter[] = "B";
- uchar topbootletter[] = "T";
- uchar botboottype[] = "bottom boot sector";
- uchar topboottype[] = "top boot sector";
-
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("missing or unknown FLASH type\n");
- return;
- }
-
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD: printf ("AMD "); break;
- case FLASH_MAN_BM: printf ("BRIGHT MICRO "); break;
- case FLASH_MAN_FUJ: printf ("FUJITSU "); break;
- case FLASH_MAN_SST: printf ("SST "); break;
- case FLASH_MAN_STM: printf ("STM "); break;
- case FLASH_MAN_INTEL: printf ("INTEL "); break;
- case FLASH_MAN_MX: printf ("MXIC "); break;
- default: printf ("Unknown Vendor "); break;
- }
-
- /* check for top or bottom boot, if it applies */
- if (info->flash_id & FLASH_BTYPE) {
- boottype = botboottype;
- bootletter = botbootletter;
- }
- else {
- boottype = topboottype;
- bootletter = topbootletter;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_AM640U:
- fmt = "29LV641D (64 Mbit, uniform sectors)\n";
- break;
- case FLASH_28F800C3B:
- case FLASH_28F800C3T:
- fmt = "28F800C3%s (8 Mbit, %s)\n";
- break;
- case FLASH_INTEL800B:
- case FLASH_INTEL800T:
- fmt = "28F800B3%s (8 Mbit, %s)\n";
- break;
- case FLASH_28F160C3B:
- case FLASH_28F160C3T:
- fmt = "28F160C3%s (16 Mbit, %s)\n";
- break;
- case FLASH_INTEL160B:
- case FLASH_INTEL160T:
- fmt = "28F160B3%s (16 Mbit, %s)\n";
- break;
- case FLASH_28F320C3B:
- case FLASH_28F320C3T:
- fmt = "28F320C3%s (32 Mbit, %s)\n";
- break;
- case FLASH_INTEL320B:
- case FLASH_INTEL320T:
- fmt = "28F320B3%s (32 Mbit, %s)\n";
- break;
- case FLASH_28F640C3B:
- case FLASH_28F640C3T:
- fmt = "28F640C3%s (64 Mbit, %s)\n";
- break;
- case FLASH_INTEL640B:
- case FLASH_INTEL640T:
- fmt = "28F640B3%s (64 Mbit, %s)\n";
- break;
- case FLASH_28F128J3A:
- fmt = "28F128J3A (128 Mbit, 128 uniform sectors)\n";
- break;
- case FLASH_28F320J3A:
- fmt = "28F320J3A (32 Mbit, 32 uniform sectors)\n";
- break;
- case FLASH_29LV640BB: //liupeng for MXIC FLASH_29LV640BB
- fmt = "29LV640BB (64 Mbit, boot sector SA0~SA126 size 64k bytes,other sectors SA127~SA135 size 8k bytes)\n";
- break;
- case FLASH_29LV320B: //joelin for MXIC FLASH_29LV320AB
- case FLASH_29LV320AB: //joelin for MXIC FLASH_29LV320AB
- fmt = "29LV320AB (32 Mbit, boot sector SA0~SA7 size 8K bytes,other sectors SA8~SA70 size 64K bytes)\n";
- break;
- case FLASH_29LV160BB: //joelin for MXIC FLASH_29LV160BB
- fmt = "29LV160BB (16 Mbit, boot sector SA0 size 16K bytes,SA1,SA2 size 8K bytes,SA3 size 32k bytes,other sectors SA4~SA34 size 64K bytes)\n";
- break;
- default:
- fmt = "Unknown Chip Type\n";
- break;
- }
-
- printf (fmt, bootletter, boottype);
-
- printf (" Size: %ld MB in %d Sectors\n",
- info->size >> 20,
- info->sector_count);
-
- printf (" Sector Start Addresses:");
-
- for (i=0; i<info->sector_count; ++i) {
- if ((i % 5) == 0) {
- printf ("\n ");
- }
-
- printf (" %08lX%s", info->start[i],
- info->protect[i] ? " (RO)" : " ");
- }
-
- printf ("\n");
-}
-
-/*-----------------------------------------------------------------------
- */
-
-/*
- * The following code cannot be run from FLASH!
- */
-
-ulong flash_get_size (FPWV *addr, flash_info_t *info)
-{
- (*DANUBE_EBU_BUSCON0)=0x1d7ff; //value from Aikann, should be used on the real chip
- (*EBU_ADDR_SEL_0) = 0x10000031; //starting address from 0xb0000000
- (*EBU_NAND_CON)=0;
- (*DANUBE_EBU_BUSCON0)&=(~0x80000000); // enable writing
- (*DANUBE_EBU_BUSCON1)&=(~0x80000000); // enable writing
- /* Write auto select command: read Manufacturer ID */
-
- /* Write auto select command sequence and test FLASH answer */
- addr[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* for AMD, Intel ignores this */
- asm("SYNC");
- addr[FLASH_CYCLE2] = (FPW)0x00550055; /* for AMD, Intel ignores this */
- asm("SYNC");
- addr[FLASH_CYCLE1] = (FPW)0x00900090; /* selects Intel or AMD */
- asm("SYNC");
-
- /* The manufacturer codes are only 1 byte, so just use 1 byte.
- * This works for any bus width and any FLASH device width.
- */
-
- printf("\n type is %08lx", addr[1] & 0xff); //joelin 10/06/2004 flash type
- printf("\n type is %08lx", addr[0] & 0xff); //joelin 10/06/2004 flash type
-// asm("SYNC");
- switch (addr[1] & 0xff) {
- case (uchar)AMD_MANUFACT:
- info->flash_id = FLASH_MAN_AMD;
- break;
-
- case (uchar)INTEL_MANUFACT: // 0x0089
- info->flash_id = FLASH_MAN_INTEL; //0x00300000
- break;
-
-//joelin for MXIC
- case (uchar)MX_MANUFACT: // 0x00c2
- info->flash_id = FLASH_MAN_MX ;//0x00030000
- break;
-
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- break;
-/* default:
- info->flash_id = FLASH_MAN_INTEL; //0x00300000
- break;*/
- }
-
- /* Check 16 bits or 32 bits of ID so work on 32 or 16 bit bus. */
- if (info->flash_id != FLASH_UNKNOWN) switch (addr[0]) {
- case (FPW)EON_ID_EN29LV320B:
- info->flash_id += FLASH_29LV320B;
- info->sector_count = 71;
- info->size = 0x00400000 * (sizeof(FPW)/2);
- break;
- case (FPW)AMD_ID_LV640U: /* 29LV640 and 29LV641 have same ID */
- info->flash_id += FLASH_AM640U;
- info->sector_count = 128;
- info->size = 0x00800000 * (sizeof(FPW)/2);
- break; /* => 8 or 16 MB */
-
- case (FPW)INTEL_ID_28F800C3B:
- info->flash_id += FLASH_28F800C3B;
- info->sector_count = 23;
- info->size = 0x00100000 * (sizeof(FPW)/2);
- break; /* => 1 or 2 MB */
-
- case (FPW)INTEL_ID_28F800B3B:
- info->flash_id += FLASH_INTEL800B;
- info->sector_count = 23;
- info->size = 0x00100000 * (sizeof(FPW)/2);
- break; /* => 1 or 2 MB */
-
- case (FPW)INTEL_ID_28F160C3B:
- info->flash_id += FLASH_28F160C3B;
- info->sector_count = 39;
- info->size = 0x00200000 * (sizeof(FPW)/2);
- break; /* => 2 or 4 MB */
-
- case (FPW)INTEL_ID_28F160B3B:
- info->flash_id += FLASH_INTEL160B;
- info->sector_count = 39;
- info->size = 0x00200000 * (sizeof(FPW)/2);
- break; /* => 2 or 4 MB */
-
- case (FPW)INTEL_ID_28F320C3B:
- info->flash_id += FLASH_28F320C3B;
- info->sector_count = 71;
- info->size = 0x00400000 * (sizeof(FPW)/2);
- break; /* => 4 or 8 MB */
-
- case (FPW)INTEL_ID_28F320B3B:
- info->flash_id += FLASH_INTEL320B;
- info->sector_count = 71;
- info->size = 0x00400000 * (sizeof(FPW)/2);
- break; /* => 4 or 8 MB */
-
- case (FPW)INTEL_ID_28F640C3B:
- info->flash_id += FLASH_28F640C3B;
- info->sector_count = 135;
- info->size = 0x00800000 * (sizeof(FPW)/2);
- break; /* => 8 or 16 MB */
-
- case (FPW)INTEL_ID_28F640B3B:
- info->flash_id += FLASH_INTEL640B;
- info->sector_count = 135;
- info->size = 0x00800000 * (sizeof(FPW)/2);
- break; /* => 8 or 16 MB */
-
- case (FPW)INTEL_ID_28F128J3A:
- info->flash_id +=FLASH_28F128J3A;
- info->sector_count = 128;
- info->size = 0x01000000 * (sizeof(FPW)/2);
- break; /* => 16 MB */
- case (FPW)INTEL_ID_28F320J3A:
- info->flash_id += FLASH_28F320J3A;
- info->sector_count = 32;
- info->size = 0x00400000 * (sizeof(FPW)/2);
- break;
-//joelin for MXIC
- case (FPW)MX_ID_29LV320AB:
- info->flash_id += FLASH_29LV320AB;
- info->sector_count = 71;
- info->size = 0x00400000 * (sizeof(FPW)/2);
- break; /* => 4 MB */
- /* => 4 MB */
-//joelin for MXIC
- case (FPW)MX_ID_29LV160BB:
- info->flash_id += FLASH_29LV160BB;
- info->sector_count = 35;
- info->size = 0x00200000 * (sizeof(FPW)/2);
- break; /* => 2 MB */
- /* => 2 MB */
- /* liupeng*/
- case (FPW)MX_ID_29LV640BB:
- info->flash_id += FLASH_29LV640BB;
- info->sector_count = 135;
- info->size = 0x00800000 * (sizeof(FPW)/2);
- break; /* => 2 MB */
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
- info->size = 0;
- return (0); /* => no or unknown flash */
-/* default:
- info->flash_id += FLASH_28F320J3A;
- info->sector_count = 32;
- info->size = 0x00400000 * (sizeof(FPW)/2);
- break;*/
- }
-
-
- (*DANUBE_EBU_BUSCON0)|=0x80000000; // disable writing
- (*DANUBE_EBU_BUSCON1)|=0x80000000; // disable writing
-
- flash_get_offsets((ulong)addr, info);
-
- /* Put FLASH back in read mode */
- flash_reset(info);
-
- return (info->size);
-}
-
-/*-----------------------------------------------------------------------
- */
-
-int flash_erase (flash_info_t *info, int s_first, int s_last)
-{
- FPWV *addr;
- int flag, prot, sect;
- int intel = (info->flash_id & FLASH_VENDMASK) == FLASH_MAN_INTEL;
- ulong start, now, last;
- int rcode = 0;
- if ((s_first < 0) || (s_first > s_last)) {
- if (info->flash_id == FLASH_UNKNOWN) {
- printf ("- missing\n");
- } else {
- printf ("- no sectors to erase\n");
- }
- return 1;
- }
-
- switch (info->flash_id & FLASH_TYPEMASK) {
- case FLASH_INTEL800B:
- case FLASH_INTEL160B:
- case FLASH_INTEL320B:
- case FLASH_INTEL640B:
- case FLASH_28F800C3B:
- case FLASH_28F160C3B:
- case FLASH_28F320C3B:
- case FLASH_28F640C3B:
- case FLASH_28F128J3A:
- case FLASH_28F320J3A:
- case FLASH_AM640U:
- case FLASH_29LV640BB: //liupeng for MXIC MX29LV640BB
- case FLASH_29LV320B:
- case FLASH_29LV320AB: //joelin for MXIC MX29LV320AB
- case FLASH_29LV160BB: //joelin for MXIC MX29LV160BB
- break;
- case FLASH_UNKNOWN:
- default:
- printf ("Can't erase unknown flash type %08lx - aborted\n",
- info->flash_id);
- return 1;
- }
-
- prot = 0;
- for (sect=s_first; sect<=s_last; ++sect) {
- if (info->protect[sect]) {
- prot++;
- }
- }
-
- if (prot) {
- printf ("- Warning: %d protected sectors will not be erased!\n",
- prot);
- } else {
- printf ("\n");
- }
-
- last = get_timer(0);
-
- /* Start erase on unprotected sectors */
- for (sect = s_first; sect<=s_last && rcode == 0; sect++) {
-
- if (info->protect[sect] != 0) /* protected, skip it */
- continue;
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- (*DANUBE_EBU_BUSCON0)&=(~0x80000000); // enable writing
- (*DANUBE_EBU_BUSCON1)&=(~0x80000000); // enable writing
- (*EBU_NAND_CON)=0;
- addr = (FPWV *)(info->start[sect]);
- if (intel) {
- *addr = (FPW)0x00500050; /* clear status register */
- *addr = (FPW)0x00200020; /* erase setup */
- *addr = (FPW)0x00D000D0; /* erase confirm */
- asm("SYNC");
- }
- else {
- /* must be AMD style if not Intel */
- FPWV *base; /* first address in bank */
-
- base = (FPWV *)(info->start[0]);
- base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */
- base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */
- base[FLASH_CYCLE1] = (FPW)0x00800080; /* erase mode */
- base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */
- base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */
- *addr = (FPW)0x00300030; /* erase sector */
- }
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- start = get_timer(0);
-
- /* wait at least 50us for AMD, 80us for Intel.
- * Let's wait 1 ms.
- */
- udelay (1000);
-
- while ((*addr & (FPW)0x00800080) != (FPW)0x00800080) {
- if ((now = get_timer(start)) > CFG_FLASH_ERASE_TOUT) {
- printf ("Erase Timeout\n");
-
- if (intel) {
- /* suspend erase */
- *addr = (FPW)0x00B000B0;
- }
-
- flash_reset(info); /* reset to read mode */
- rcode = 1; /* failed */
- break;
- }
-
- /* show that we're waiting */
- if ((get_timer(last)) > CFG_HZ) {/* every second */
- putc ('.');
- last = get_timer(0);
- }
- }
-
-
-//joelin for MXIC
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_MX: //joelin for MXIC
- break;
- default:
- if((*addr & (FPW)0x00200020) != (FPW)0x0)
- printf("Erase Error\n");
- break;
- }
-
-
-
- /* show that we're waiting */
- if ((get_timer(last)) > CFG_HZ) { /* every second */
- putc ('.');
- last = get_timer(0);
- }
-
- //flash_reset(info); /* reset to read mode */
- }
-
- (*DANUBE_EBU_BUSCON0)|=0x80000000; // disable writing
- (*DANUBE_EBU_BUSCON1)|=0x80000000; // disable writing
-
- flash_reset(info); /* Homebox Black with JS28F128J3D75 had trouble reading after erase */
-
- printf (" done\n");
- return rcode;
-}
-
-/*-----------------------------------------------------------------------
- * Copy memory to flash, returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-int write_buff (flash_info_t *info, uchar *src, ulong addr, ulong cnt)
-{
- FPW data = 0; /* 16 or 32 bit word, matches flash bus width on MPC8XX */
- int bytes; /* number of bytes to program in current word */
- int left; /* number of bytes left to program */
- int i, res;
-
- for (left = cnt, res = 0;
- left > 0 && res == 0;
- addr += sizeof(data), left -= sizeof(data) - bytes) {
-
- bytes = addr & (sizeof(data) - 1);
- addr &= ~(sizeof(data) - 1);
-
- /* combine source and destination data so can program
- * an entire word of 16 or 32 bits
- */
- for (i = 0; i < sizeof(data); i++) {
- data <<= 8;
- if (i < bytes || i - bytes >= left )
- data += *((uchar *)addr + i);
- else
- data += *src++;
- }
-
- /* write one word to the flash */
- switch (info->flash_id & FLASH_VENDMASK) {
- case FLASH_MAN_AMD:
- case FLASH_MAN_MX: //joelin for MXIC
- res = write_word_amd(info, (FPWV *)addr, data);
- break;
- case FLASH_MAN_INTEL:
- res = write_word_intel(info, (FPWV *)addr, data);
- break;
- default:
- /* unknown flash type, error! */
- printf ("missing or unknown FLASH type\n");
- res = 1; /* not really a timeout, but gives error */
- break;
- }
- }
-
- return (res);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for AMD FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_amd (flash_info_t *info, FPWV *dest, FPW data)
-{
- ulong start;
- int flag;
- int res = 0; /* result, assume success */
- FPWV *base; /* first address in flash bank */
-
- /* Check if Flash is (sufficiently) erased */
- if ((*dest & data) != data) {
- return (2);
- }
-
- base = (FPWV *)(info->start[0]);
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- (*DANUBE_EBU_BUSCON0)&=(~0x80000000); // enable writing
- (*DANUBE_EBU_BUSCON1)&=(~0x80000000); // enable writing
- (*EBU_NAND_CON)=0;
-
- base[FLASH_CYCLE1] = (FPW)0x00AA00AA; /* unlock */
- base[FLASH_CYCLE2] = (FPW)0x00550055; /* unlock */
- base[FLASH_CYCLE1] = (FPW)0x00A000A0; /* selects program mode */
-
- *dest = data; /* start programming the data */
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- start = get_timer (0);
-
- /* data polling for D7 */
- while (res == 0 && (*dest & (FPW)0x00800080) != (data & (FPW)0x00800080)) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
- *dest = (FPW)0x00F000F0; /* reset bank */
- res = 1;
- }
- }
-
- (*DANUBE_EBU_BUSCON0)|=0x80000000; // disable writing
- (*DANUBE_EBU_BUSCON1)|=0x80000000; // disable writing
-
- return (res);
-}
-
-/*-----------------------------------------------------------------------
- * Write a word to Flash for Intel FLASH
- * A word is 16 or 32 bits, whichever the bus width of the flash bank
- * (not an individual chip) is.
- *
- * returns:
- * 0 - OK
- * 1 - write timeout
- * 2 - Flash not erased
- */
-static int write_word_intel (flash_info_t *info, FPWV *dest, FPW data)
-{
- ulong start;
- int flag;
- int res = 0; /* result, assume success */
-
- /* Check if Flash is (sufficiently) erased */
- if ((*dest & data) != data) {
- return (2);
- }
-
- /* Disable interrupts which might cause a timeout here */
- flag = disable_interrupts();
-
- (*DANUBE_EBU_BUSCON0)&=(~0x80000000); // enable writing
- (*DANUBE_EBU_BUSCON1)&=(~0x80000000); // enable writing
- (*EBU_NAND_CON)=0;
- *dest = (FPW)0x00500050; /* clear status register */
- *dest = (FPW)0x00FF00FF; /* make sure in read mode */
- *dest = (FPW)0x00400040; /* program setup */
- *dest = data; /* start programming the data */
- asm("SYNC");
-
- /* re-enable interrupts if necessary */
- if (flag)
- enable_interrupts();
-
- start = get_timer (0);
-
- while (res == 0 && (*dest & (FPW)0x00800080) != (FPW)0x00800080) {
- if (get_timer(start) > CFG_FLASH_WRITE_TOUT) {
- *dest = (FPW)0x00B000B0; /* Suspend program */
- res = 1;
- }
- }
-
- if (res == 0 && (*dest & (FPW)0x00100010))
- res = 1; /* write failed, time out error is close enough */
-
- *dest = (FPW)0x00500050; /* clear status register */
- flash_reset(info);
-
- (*DANUBE_EBU_BUSCON0)|=0x80000000; // disable writing
- (*DANUBE_EBU_BUSCON1)|=0x80000000; // disable writing
-
- return (res);
-}
+++ /dev/null
-
-/*
- * Memory sub-system initialization code for INCA-IP2 development board.
- * Andre Messerschmidt
- * Copyright (c) 2005 Infineon Technologies AG
- *
- * Based on Inca-IP code
- * Copyright (c) 2003 Wolfgang Denk <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-/* History:
- peng liu May 25, 2006, for PLL setting after reset, 05252006
- */
-#include <config.h>
-#include <version.h>
-#include <asm/regdef.h>
-#include <configs/danube.h>
-
-
-#ifdef USE_REFERENCE_BOARD
-#ifdef DANUBE_DDR_RAM_111M
-#include "ddr_settings_r111.h"
-#elif defined(PROMOSDDR400)
-#include "ddr_settings_PROMOSDDR400.h"
-#elif defined(DDR_SAMSUNG_166M)
-#include "ddr_settings_Samsung_166.h"
-#elif defined(DDR_PSC_166M)
-#include "ddr_settings_psc_166.h"
-#else
-#include "ddr_settings_r166.h"
-#endif
-#endif
-
-#ifdef USE_EVALUATION_BOARD
-#ifdef DANUBE_DDR_RAM_111M
-#include "ddr_settings_e111.h"
-#else
-#include "ddr_settings_e166.h"
-#endif
-#endif
-
-
-
-/*TODO: liupeng check !!! */
-#define EBU_MODUL_BASE 0xB4102000
-#define EBU_CLC(value) 0x0000(value)
-#define EBU_CON(value) 0x0010(value)
-#define EBU_ADDSEL0(value) 0x0020(value)
-#define EBU_ADDSEL1(value) 0x0024(value)
-#define EBU_ADDSEL2(value) 0x0028(value)
-#define EBU_ADDSEL3(value) 0x002C(value)
-#define EBU_BUSCON0(value) 0x0060(value)
-#define EBU_BUSCON1(value) 0x0064(value)
-#define EBU_BUSCON2(value) 0x0068(value)
-#define EBU_BUSCON3(value) 0x006C(value)
-
-#define MC_MODUL_BASE 0xBF800000
-#define MC_ERRCAUSE(value) 0x0010(value)
-#define MC_ERRADDR(value) 0x0020(value)
-#define MC_CON(value) 0x0060(value)
-
-#define MC_SRAM_ENABLE 0x00000004
-#define MC_SDRAM_ENABLE 0x00000002
-#define MC_DDRRAM_ENABLE 0x00000001
-
-#define MC_SDR_MODUL_BASE 0xBF800200
-#define MC_IOGP(value) 0x0000(value)
-#define MC_CTRLENA(value) 0x0010(value)
-#define MC_MRSCODE(value) 0x0020(value)
-#define MC_CFGDW(value) 0x0030(value)
-#define MC_CFGPB0(value) 0x0040(value)
-#define MC_LATENCY(value) 0x0080(value)
-#define MC_TREFRESH(value) 0x0090(value)
-#define MC_SELFRFSH(value) 0x00A0(value)
-
-#define MC_DDR_MODUL_BASE 0xBF801000
-#define MC_DC00(value) 0x0000(value)
-#define MC_DC01(value) 0x0010(value)
-#define MC_DC02(value) 0x0020(value)
-#define MC_DC03(value) 0x0030(value)
-#define MC_DC04(value) 0x0040(value)
-#define MC_DC05(value) 0x0050(value)
-#define MC_DC06(value) 0x0060(value)
-#define MC_DC07(value) 0x0070(value)
-#define MC_DC08(value) 0x0080(value)
-#define MC_DC09(value) 0x0090(value)
-#define MC_DC10(value) 0x00A0(value)
-#define MC_DC11(value) 0x00B0(value)
-#define MC_DC12(value) 0x00C0(value)
-#define MC_DC13(value) 0x00D0(value)
-#define MC_DC14(value) 0x00E0(value)
-#define MC_DC15(value) 0x00F0(value)
-#define MC_DC16(value) 0x0100(value)
-#define MC_DC17(value) 0x0110(value)
-#define MC_DC18(value) 0x0120(value)
-#define MC_DC19(value) 0x0130(value)
-#define MC_DC20(value) 0x0140(value)
-#define MC_DC21(value) 0x0150(value)
-#define MC_DC22(value) 0x0160(value)
-#define MC_DC23(value) 0x0170(value)
-#define MC_DC24(value) 0x0180(value)
-#define MC_DC25(value) 0x0190(value)
-#define MC_DC26(value) 0x01A0(value)
-#define MC_DC27(value) 0x01B0(value)
-#define MC_DC28(value) 0x01C0(value)
-#define MC_DC29(value) 0x01D0(value)
-#define MC_DC30(value) 0x01E0(value)
-#define MC_DC31(value) 0x01F0(value)
-#define MC_DC32(value) 0x0200(value)
-#define MC_DC33(value) 0x0210(value)
-#define MC_DC34(value) 0x0220(value)
-#define MC_DC35(value) 0x0230(value)
-#define MC_DC36(value) 0x0240(value)
-#define MC_DC37(value) 0x0250(value)
-#define MC_DC38(value) 0x0260(value)
-#define MC_DC39(value) 0x0270(value)
-#define MC_DC40(value) 0x0280(value)
-#define MC_DC41(value) 0x0290(value)
-#define MC_DC42(value) 0x02A0(value)
-#define MC_DC43(value) 0x02B0(value)
-#define MC_DC44(value) 0x02C0(value)
-#define MC_DC45(value) 0x02D0(value)
-#define MC_DC46(value) 0x02E0(value)
-
-#define RCU_OFFSET 0xBF203000
-#define RCU_RST_REQ (RCU_OFFSET + 0x0010)
-#define RCU_STS (RCU_OFFSET + 0x0014)
-
-#define CGU_OFFSET 0xBF103000
-#define PLL0_CFG (CGU_OFFSET + 0x0004)
-#define PLL1_CFG (CGU_OFFSET + 0x0008)
-#define PLL2_CFG (CGU_OFFSET + 0x000C)
-#define CGU_SYS (CGU_OFFSET + 0x0010)
-#define CGU_UPDATE (CGU_OFFSET + 0x0014)
-#define IF_CLK (CGU_OFFSET + 0x0018)
-#define CGU_SMD (CGU_OFFSET + 0x0020)
-#define CGU_CT1SR (CGU_OFFSET + 0x0028)
-#define CGU_CT2SR (CGU_OFFSET + 0x002C)
-#define CGU_PCMCR (CGU_OFFSET + 0x0030)
-#define PCI_CR_PCI (CGU_OFFSET + 0x0034)
-#define CGU_OSC_CTRL (CGU_OFFSET + 0x001C)
-#define CGU_MIPS_PWR_DWN (CGU_OFFSET + 0x0038)
-#define CLK_MEASURE (CGU_OFFSET + 0x003C)
-
-//05252006
-#define pll0_35MHz_CONFIG 0x9D861059
-#define pll1_35MHz_CONFIG 0x1A260CD9
-#define pll2_35MHz_CONFIG 0x8000f1e5
-#define pll0_36MHz_CONFIG 0x1000125D
-#define pll1_36MHz_CONFIG 0x1B1E0C99
-#define pll2_36MHz_CONFIG 0x8002f2a1
-//05252006
-
-//06063001-joelin disable the PCI CFRAME mask -start
-/*CFRAME is an I/O signal, in the chip, the output CFRAME is selected via GPIO altsel pins, so if you select MII1 RXD1, the CFRAME will not come out.
-But the CFRAME input still take the signal from the pad and not disabled when altsel choose other function. So when MII1_RXD1 is low from other device, the EBU interface will be disabled.
-
-The chip function in such a way that disable the CFRAME mask mean EBU not longer check CFRAME to be the device using the bus.
-The side effect is the entire PCI block will see CFRAME low all the time meaning PCI cannot use the bus at all so no more PCI function.
-*/
-#define PCI_CR_PR_OFFSET 0xBE105400
-#define PCI_CR_PCI_MOD_REG (PCI_CR_PR_OFFSET + 0x0030)
-#define PCI_CONFIG_SPACE 0xB7000000
-#define CS_CFM (PCI_CONFIG_SPACE + 0x6C)
-//06063001-joelin disable the PCI CFRAME mask -end
- .set noreorder
-
-
-/*
- * void ebu_init(long)
- *
- * a0 has the clock value we are going to run at
- */
- .globl ebu_init
- .ent ebu_init
-ebu_init:
-/*TODO:liupeng */
- j ra
- nop
-
- .end ebu_init
-
-
-/*
- * void cgu_init(long)
- *
- * a0 has the clock value
- */
- .globl cgu_init
- .ent cgu_init
-cgu_init:
- li t2, CGU_SYS
- lw t2,0(t2)
- beq t2,a0,freq_up2date
- nop
-
- li t2, RCU_STS
- lw t2, 0(t2)
- and t2,0x00020000
- beq t2,0x00020000,boot_36MHZ
- nop
-//05252006
- li t1, PLL0_CFG
- li t2, pll0_35MHz_CONFIG
- sw t2,0(t1)
- li t1, PLL1_CFG
- li t2, pll1_35MHz_CONFIG
- sw t2,0(t1)
- li t1, PLL2_CFG
- li t2, pll2_35MHz_CONFIG
- sw t2,0(t1)
- li t1, CGU_SYS
- sw a0,0(t1)
- li t1, RCU_RST_REQ
- li t2, 0x40000008
- sw t2,0(t1)
- b wait_reset
- nop
-boot_36MHZ:
- li t1, PLL0_CFG
- li t2, pll0_36MHz_CONFIG
- sw t2,0(t1)
- li t1, PLL1_CFG
- li t2, pll1_36MHz_CONFIG
- sw t2,0(t1)
- li t1, PLL2_CFG
- li t2, pll2_36MHz_CONFIG
- sw t2,0(t1)
- li t1, CGU_SYS
- sw a0,0(t1)
- li t1, RCU_RST_REQ
- li t2, 0x40000008
- sw t2,0(t1)
-//05252006
-
-wait_reset:
- b wait_reset
- nop
-freq_up2date:
- j ra
- nop
- .end cgu_init
-
-
-/*
- * void sdram_init(long)
- *
- * a0 has the clock value
- */
- .globl sdram_init
- .ent sdram_init
-sdram_init:
-
- /* SDRAM Initialization
- */
- li t1, MC_MODUL_BASE
-
- /* Clear Error log registers */
- sw zero, MC_ERRCAUSE(t1)
- sw zero, MC_ERRADDR(t1)
-
- /* Enable SDRAM module in memory controller */
- li t3, MC_SDRAM_ENABLE
- lw t2, MC_CON(t1)
- or t3, t2, t3
- sw t3, MC_CON(t1)
-
- li t1, MC_SDR_MODUL_BASE
-
- /* disable the controller */
- li t2, 0
- sw t2, MC_CTRLENA(t1)
-
- li t2, 0x822
- sw t2, MC_IOGP(t1)
-
- li t2, 0x2
- sw t2, MC_CFGDW(t1)
-
- /* Set CAS Latency */
- li t2, 0x00000020
- sw t2, MC_MRSCODE(t1)
-
- /* Set CS0 to SDRAM parameters */
- li t2, 0x000014d8
- sw t2, MC_CFGPB0(t1)
-
- /* Set SDRAM latency parameters */
- li t2, 0x00036325; /* BC PC100 */
- sw t2, MC_LATENCY(t1)
-
- /* Set SDRAM refresh rate */
- li t2, 0x00000C30
- sw t2, MC_TREFRESH(t1)
-
- /* Clear Power-down registers */
- sw zero, MC_SELFRFSH(t1)
-
- /* Finally enable the controller */
- li t2, 1
- sw t2, MC_CTRLENA(t1)
-
-
- j ra
- nop
-
-
- .end sdram_init
-
-/*
- * void ddrram_init(long)
- *
- * a0 has the clock value
- */
- .globl ddrram_init
- .ent ddrram_init
-ddrram_init:
-
- /* DDR-DRAM Initialization
- */
- li t1, MC_MODUL_BASE
-
- /* Clear Error log registers */
- sw zero, MC_ERRCAUSE(t1)
- sw zero, MC_ERRADDR(t1)
-
- /* Enable DDR module in memory controller */
- li t3, MC_DDRRAM_ENABLE
- lw t2, MC_CON(t1)
- or t3, t2, t3
- sw t3, MC_CON(t1)
-
- li t1, MC_DDR_MODUL_BASE
-
- /* Write configuration to DDR controller registers */
- li t2, MC_DC0_VALUE
- sw t2, MC_DC00(t1)
-
- li t2, MC_DC1_VALUE
- sw t2, MC_DC01(t1)
-
- li t2, MC_DC2_VALUE
- sw t2, MC_DC02(t1)
-
- li t2, MC_DC3_VALUE
- sw t2, MC_DC03(t1)
-
- li t2, MC_DC4_VALUE
- sw t2, MC_DC04(t1)
-
- li t2, MC_DC5_VALUE
- sw t2, MC_DC05(t1)
-
- li t2, MC_DC6_VALUE
- sw t2, MC_DC06(t1)
-
- li t2, MC_DC7_VALUE
- sw t2, MC_DC07(t1)
-
- li t2, MC_DC8_VALUE
- sw t2, MC_DC08(t1)
-
- li t2, MC_DC9_VALUE
- sw t2, MC_DC09(t1)
-
- li t2, MC_DC10_VALUE
- sw t2, MC_DC10(t1)
-
- li t2, MC_DC11_VALUE
- sw t2, MC_DC11(t1)
-
- li t2, MC_DC12_VALUE
- sw t2, MC_DC12(t1)
-
- li t2, MC_DC13_VALUE
- sw t2, MC_DC13(t1)
-
- li t2, MC_DC14_VALUE
- sw t2, MC_DC14(t1)
-
- li t2, MC_DC15_VALUE
- sw t2, MC_DC15(t1)
-
- li t2, MC_DC16_VALUE
- sw t2, MC_DC16(t1)
-
- li t2, MC_DC17_VALUE
- sw t2, MC_DC17(t1)
-
- li t2, MC_DC18_VALUE
- sw t2, MC_DC18(t1)
-
- li t2, MC_DC19_VALUE
- sw t2, MC_DC19(t1)
-
- li t2, MC_DC20_VALUE
- sw t2, MC_DC20(t1)
-
- li t2, MC_DC21_VALUE
- sw t2, MC_DC21(t1)
-
- li t2, MC_DC22_VALUE
- sw t2, MC_DC22(t1)
-
- li t2, MC_DC23_VALUE
- sw t2, MC_DC23(t1)
-
- li t2, MC_DC24_VALUE
- sw t2, MC_DC24(t1)
-
- li t2, MC_DC25_VALUE
- sw t2, MC_DC25(t1)
-
- li t2, MC_DC26_VALUE
- sw t2, MC_DC26(t1)
-
- li t2, MC_DC27_VALUE
- sw t2, MC_DC27(t1)
-
- li t2, MC_DC28_VALUE
- sw t2, MC_DC28(t1)
-
- li t2, MC_DC29_VALUE
- sw t2, MC_DC29(t1)
-
- li t2, MC_DC30_VALUE
- sw t2, MC_DC30(t1)
-
- li t2, MC_DC31_VALUE
- sw t2, MC_DC31(t1)
-
- li t2, MC_DC32_VALUE
- sw t2, MC_DC32(t1)
-
- li t2, MC_DC33_VALUE
- sw t2, MC_DC33(t1)
-
- li t2, MC_DC34_VALUE
- sw t2, MC_DC34(t1)
-
- li t2, MC_DC35_VALUE
- sw t2, MC_DC35(t1)
-
- li t2, MC_DC36_VALUE
- sw t2, MC_DC36(t1)
-
- li t2, MC_DC37_VALUE
- sw t2, MC_DC37(t1)
-
- li t2, MC_DC38_VALUE
- sw t2, MC_DC38(t1)
-
- li t2, MC_DC39_VALUE
- sw t2, MC_DC39(t1)
-
- li t2, MC_DC40_VALUE
- sw t2, MC_DC40(t1)
-
- li t2, MC_DC41_VALUE
- sw t2, MC_DC41(t1)
-
- li t2, MC_DC42_VALUE
- sw t2, MC_DC42(t1)
-
- li t2, MC_DC43_VALUE
- sw t2, MC_DC43(t1)
-
- li t2, MC_DC44_VALUE
- sw t2, MC_DC44(t1)
-
- li t2, MC_DC45_VALUE
- sw t2, MC_DC45(t1)
-
- li t2, MC_DC46_VALUE
- sw t2, MC_DC46(t1)
-
- li t2, 0x00000100
- sw t2, MC_DC03(t1)
-
- j ra
- nop
-
-
- .end ddrram_init
-
- .globl lowlevel_init
- .ent lowlevel_init
-lowlevel_init:
- /* EBU, CGU and SDRAM/DDR-RAM Initialization.
- */
- move t0, ra
- /* We rely on the fact that neither cgu_init() nor sdram_init()
- * modify t0
- */
-#ifdef DANUBE_BOOT_FROM_EBU
-#ifdef DANUBE_DDR_RAM_166M
-//05252006
- /* 0xe8 means CPU0/CPU1 333M, DDR 167M, FPI 83M, PPE 240M */
- li a0,0xe8
- bal cgu_init
- nop
-#endif
-#ifdef PROMOSDDR400
- li a0,0xe8
- bal cgu_init
- nop
-#endif
-#ifdef DDR_SAMSUNG_166M
- li a0,0xe8
- bal cgu_init
- nop
-#endif
-#ifdef DDR_PSC_166M
- li a0,0xe8
- bal cgu_init
- nop
-#endif
-#ifdef DANUBE_DDR_RAM_133M
- li a0,0xe9
-//05252006
- bal cgu_init
- nop
-#endif
-#endif
-/*TODO:liupeng add this define !!!! */
-/*
- #define DANUBE_BOOT_FROM_EBU
- #define DANUBE_USE_DDR_RAM
-*/
-
-//06063001-joelin disable the PCI CFRAME mask-start
-#ifdef DISABLE_CFRAME
- li t1, PCI_CR_PCI //mw bf103034 80000000
- li t2, 0x80000000
- sw t2,0(t1)
-
- li t1, PCI_CR_PCI_MOD_REG //mw be105430 103
- li t2, 0x103
- sw t2,0(t1)
-
- li t1, CS_CFM //mw b700006c 0
- li t2, 0x00
- sw t2, 0(t1)
-
- li t1, PCI_CR_PCI_MOD_REG //mw be105430 103
- li t2, 0x1000103
- sw t2, 0(t1)
-#endif
-//06063001-joelin disable the PCI CFRAME mask-end
-
-#ifdef DANUBE_BOOT_FROM_EBU
-#ifdef DANUBE_USE_DDR_RAM
- bal ddrram_init
- nop
-#else
- bal sdram_init
- nop
-#endif
-#endif
-
- move ra, t0
- j ra
- nop
-
- .end lowlevel_init
+++ /dev/null
-/*
- * Power Management unit initialization code for AMAZON development board.
- *
- * Copyright (c) 2003 Ou Ke, Infineon.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <config.h>
-#include <version.h>
-#include <asm/regdef.h>
-
-#define PMU_PWDCR 0xBF10201C
-#define PMU_SR 0xBF102020
-
- .globl pmuenable
-
-pmuenable:
- li t0, PMU_PWDCR
- li t1, 0x2 /* enable everything */
- sw t1, 0(t0)
-#if 0
-1:
- li t0, PMU_SR
- lw t2, 0(t0)
- bne t1, t2, 1b
- nop
-#endif
- j ra
- nop
-
-
+++ /dev/null
-/*
- * (C) Copyright 2003
- * Wolfgang Denk Engineering, <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
-OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
-*/
-OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradbigmips")
-OUTPUT_ARCH(mips)
-ENTRY(_start_bootstrap)
-SECTIONS
-{
- . = 0x00000000;
-
- . = ALIGN(4);
- .text :
- {
- *(.text)
- }
-
- . = ALIGN(4);
- .rodata : { *(.rodata*) }
-
- . = ALIGN(4);
- .data : { *(.data*) }
-
- . = ALIGN(4);
- .sdata : { *(.sdata) }
-
- _gp = ALIGN(16);
-
- __got_start_bootstrap = .;
- .got : { *(.got) }
- __got_end_bootstrap = .;
-
- .sdata : { *(.sdata) }
-
- . = .;
- __u_boot_cmd_start_bootstrap = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end_bootstrap = .;
-
- uboot_end_data_bootstrap = .;
- num_got_entries = (__got_end_bootstrap - __got_start_bootstrap) >> 2;
-
- . = ALIGN(4);
- .sbss : { *(.sbss) }
- .bss : { *(.bss) }
- uboot_end_bootstrap = .;
-}
+++ /dev/null
-/*
- * (C) Copyright 2003
- * Wolfgang Denk Engineering, <wd@denx.de>
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
-OUTPUT_FORMAT("elf32-bigmips", "elf32-bigmips", "elf32-bigmips")
-*/
-OUTPUT_FORMAT("elf32-tradbigmips", "elf32-tradbigmips", "elf32-tradbigmips")
-OUTPUT_ARCH(mips)
-ENTRY(_start)
-SECTIONS
-{
- . = 0x00000000;
-
- . = ALIGN(4);
- .text :
- {
- *(.text)
- }
-
- . = ALIGN(4);
- .rodata : { *(.rodata*) }
-
- . = ALIGN(4);
- .data : { *(.data*) }
-
- . = ALIGN(4);
- .sdata : { *(.sdata) }
-
- _gp = ALIGN(16);
-
- __got_start = .;
- .got : { *(.got) }
- __got_end = .;
-
- .sdata : { *(.sdata) }
-
- . = .;
- __u_boot_cmd_start = .;
- .u_boot_cmd : { *(.u_boot_cmd) }
- __u_boot_cmd_end = .;
-
- uboot_end_data = .;
- num_got_entries = (__got_end - __got_start) >> 2;
-
- . = ALIGN(4);
- .sbss : { *(.sbss) }
- .bss : { *(.bss) }
- uboot_end = .;
-}
+++ /dev/null
-#########################################################################
-#
-# (C) Copyright 2000-2006
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB = $(obj)lib$(SOC).a
-
-COBJS = ifx_asc.o ifx_clock.o
-
-SRCS := $(SOBJS:.o=.S) $(COBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(SOBJS) $(COBJS))
-
-all: $(obj).depend $(LIB)
-
-$(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-#########################################################################
-
-# defines $(obj).depend target
-include $(SRCTREE)/rules.mk
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-/*****************************************************************************
- * DANUBE BootROM
- * Copyright (c) 2005, Infineon Technologies AG, All rights reserved
- * IFAP DC COM SD
- *****************************************************************************/
-
-#include <config.h>
-//#include <lib.h>
-#include <asm/danube.h>
-#include <asm/addrspace.h>
-#include <asm/ifx_asc.h>
-
-
-#define ASC_FIFO_PRESENT
-#define SET_BIT(reg, mask) reg |= (mask)
-#define CLEAR_BIT(reg, mask) reg &= (~mask)
-#define CLEAR_BITS(reg, mask) CLEAR_BIT(reg, mask)
-#define SET_BITS(reg, mask) SET_BIT(reg, mask)
-#define SET_BITFIELD(reg, mask, off, val) {reg &= (~mask); reg |= (val << off);}
-
-
-typedef unsigned char u8;
-typedef unsigned short u16;
-typedef unsigned long u32;
-typedef signed long s32;
-typedef unsigned int uint;
-typedef unsigned long ulong;
-typedef volatile unsigned short vuint;
-
-
-
-void serial_setbrg (void);
-
-/*TODO: undefine this !!!*/
-#undef DEBUG_ASC_RAW
-#ifdef DEBUG_ASC_RAW
-#define DEBUG_ASC_RAW_RX_BUF 0xA0800000
-#define DEBUG_ASC_RAW_TX_BUF 0xA0900000
-#endif
-
-static volatile DanubeAsc_t *pAsc = (DanubeAsc_t *)DANUBE_ASC1;
-
-typedef struct{
- u16 fdv; /* 0~511 fractional divider value*/
- u16 reload; /* 13 bit reload value*/
-} ifx_asc_baud_reg_t;
-
-#ifdef ON_VENUS
-/*9600 @1.25M rel 00.08*/
-//#define FDV 503
-//#define RELOAD 7
-/*9600 @0.625M rel final00.01 & rtl_freeze*/
-#define FDV 503
-#define RELOAD 3
-/* first index is DDR_SEL, second index is FPI_SEL */
-#endif
-static ifx_asc_baud_reg_t g_danube_asc_baud[4][2] =
-{
-#ifdef ON_VENUS
- {{503,3},{503,3}}, /* 1152000 @ 166.67M and half*/
- {{503,3},{503,3}}, /* 1152000 @ 133.3M and half*/
- {{503,3},{503,3}}, /* 1152000 @ 111.11M and half*/
- {{503.3},{503,3}} /* 1152000 @ 83.33M and half*/
-#else
-/* TAPEOUT table */
- {{436,76},{419,36}}, /* 1152000 @ 166.67M and half*/
- {{453,63},{453,31}}, /* 1152000 @ 133.3M and half*/
- {{501,58},{510,29}}, /* 1152000 @ 111.11M and half*/
- {{419.36},{453,19}} /* 1152000 @ 83.33M and half*/
-#endif
-};
-/******************************************************************************
-*
-* asc_init - initialize a Danube ASC channel
-*
-* This routine initializes the number of data bits, parity
-* and set the selected baud rate. Interrupts are disabled.
-* Set the modem control signals if the option is selected.
-*
-* RETURNS: N/A
-*/
-
-int serial_init (void)
-{
-
- /* and we have to set CLC register*/
- CLEAR_BIT(pAsc->asc_clc, ASCCLC_DISS);
- SET_BITFIELD(pAsc->asc_clc, ASCCLC_RMCMASK, ASCCLC_RMCOFFSET, 0x0001);
-
- /* initialy we are in async mode */
- pAsc->asc_con = ASCCON_M_8ASYNC;
-
- /* select input port */
- pAsc->asc_pisel = (CONSOLE_TTY & 0x1);
-
- /* TXFIFO's filling level */
- SET_BITFIELD(pAsc->asc_txfcon, ASCTXFCON_TXFITLMASK,
- ASCTXFCON_TXFITLOFF, DANUBEASC_TXFIFO_FL);
- /* enable TXFIFO */
- SET_BIT(pAsc->asc_txfcon, ASCTXFCON_TXFEN);
-
- /* RXFIFO's filling level */
- SET_BITFIELD(pAsc->asc_txfcon, ASCRXFCON_RXFITLMASK,
- ASCRXFCON_RXFITLOFF, DANUBEASC_RXFIFO_FL);
- /* enable RXFIFO */
- SET_BIT(pAsc->asc_rxfcon, ASCRXFCON_RXFEN);
-
- /* set baud rate */
- serial_setbrg();
-
- /* enable error signals & Receiver enable */
- SET_BIT(pAsc->asc_whbstate, ASCWHBSTATE_SETREN|ASCCON_FEN|ASCCON_TOEN|ASCCON_ROEN);
-
- return 0;
-}
-
-void serial_setbrg (void)
-{
- u32 uiReloadValue, fdv;
-
-#if defined(ON_IKOS)
- /*1200 @77K */
- fdv=472;
- uiReloadValue=5;
-#else
- /*venus & tapeout */
- u32 ddr_sel,fpi_sel;
- ddr_sel = (* DANUBE_CGU_SYS) & 0x3;
- fpi_sel = ((* DANUBE_CGU_SYS) & 0x40)?1:0;
- fdv= g_danube_asc_baud[ddr_sel][fpi_sel].fdv;
- uiReloadValue=g_danube_asc_baud[ddr_sel][fpi_sel].reload;
-#endif //ON_IKOS
- /* Disable Baud Rate Generator; BG should only be written when R=0 */
- CLEAR_BIT(pAsc->asc_con, ASCCON_R);
-
- /* Enable Fractional Divider */
- SET_BIT(pAsc->asc_con, ASCCON_FDE); /* FDE = 1 */
-
- /* Set fractional divider value */
- pAsc->asc_fdv = fdv & ASCFDV_VALUE_MASK;
-
- /* Set reload value in BG */
- pAsc->asc_bg = uiReloadValue;
-
- /* Enable Baud Rate Generator */
- SET_BIT(pAsc->asc_con, ASCCON_R); /* R = 1 */
-}
-
-
-void serial_putc (const char c)
-{
- u32 txFl = 0;
-#ifdef DEBUG_ASC_RAW
- static u8 * debug = (u8 *) DEBUG_ASC_RAW_TX_BUF;
- *debug++=c;
-#endif
- if (c == '\n')
- serial_putc ('\r');
- /* check do we have a free space in the TX FIFO */
- /* get current filling level */
- do
- {
- txFl = ( pAsc->asc_fstat & ASCFSTAT_TXFFLMASK ) >> ASCFSTAT_TXFFLOFF;
- }
- while ( txFl == DANUBEASC_TXFIFO_FULL );
-
- pAsc->asc_tbuf = c; /* write char to Transmit Buffer Register */
-
- /* check for errors */
- if ( pAsc->asc_state & ASCSTATE_TOE )
- {
- SET_BIT(pAsc->asc_whbstate, ASCWHBSTATE_CLRTOE);
- return;
- }
-}
-
-void serial_puts (const char *s)
-{
- while (*s)
- {
- serial_putc (*s++);
- }
-}
-
-int asc_inb(int timeout)
-{
- u32 symbol_mask;
- char c;
- while ((pAsc->asc_fstat & ASCFSTAT_RXFFLMASK) == 0 ) {
- }
- symbol_mask = ((ASC_OPTIONS & ASCOPT_CSIZE) == ASCOPT_CS7) ? (0x7f) : (0xff);
- c = (char)(pAsc->asc_rbuf & symbol_mask);
- return (c);
-}
-
-int serial_getc (void)
-{
- char c;
- while ((pAsc->asc_fstat & ASCFSTAT_RXFFLMASK) == 0 );
- c = (char)(pAsc->asc_rbuf & 0xff);
-
-#ifdef DEBUG_ASC_RAW
- static u8* debug=(u8*)(DEBUG_ASC_RAW_RX_BUF);
- *debug++=c;
-#endif
- return c;
-}
-
-
-
-int serial_tstc (void)
-{
- int res = 1;
-
-#ifdef ASC_FIFO_PRESENT
- if ( (pAsc->asc_fstat & ASCFSTAT_RXFFLMASK) == 0 )
- {
- res = 0;
- }
-#else
- if (!(*(volatile unsigned long*)(SFPI_INTCON_BASEADDR + FBS_ISR) &
- FBS_ISR_AR))
-
- {
- res = 0;
- }
-#endif
-#if 0
- else if ( pAsc->asc_con & ASCCON_FE )
- {
- SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLRFE);
- res = 0;
- }
- else if ( pAsc->asc_con & ASCCON_PE )
- {
- SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLRPE);
- res = 0;
- }
- else if ( pAsc->asc_con & ASCCON_OE )
- {
- SET_BIT(pAsc->asc_whbcon, ASCWHBCON_CLROE);
- res = 0;
- }
-#endif
- return res;
-}
-
-
-int serial_start(void)
-{
- return 1;
-}
-
-int serial_stop(void)
-{
- return 1;
-}
+++ /dev/null
-
-#define IFX_CACHE_EXTRA_INVALID_TAG \
- mtc0 zero, CP0_TAGLO, 1; \
- mtc0 zero, CP0_TAGLO, 2; \
- mtc0 zero, CP0_TAGLO, 3; \
- mtc0 zero, CP0_TAGLO, 4;
-
-#define IFX_CACHE_EXTRA_OPERATION \
- /* set WST bit */ \
- mfc0 a0, CP0_ECC; \
- li a1, ECCF_WST; \
- or a0, a1; \
- mtc0 a0, CP0_ECC; \
- \
- li a0, K0BASE; \
- move a2, t2; /* icacheSize */ \
- move a3, t4; /* icacheLineSize */ \
- move a1, a2; \
- icacheop(a0,a1,a2,a3,(Index_Store_Tag_I)); \
- \
- /* clear WST bit */ \
- mfc0 a0, CP0_ECC; \
- li a1, ~ECCF_WST; \
- and a0, a1; \
- mtc0 a0, CP0_ECC; \
- \
- /* 1: initialise dcache tags. */ \
- \
- /* cache line size */ \
- li a2, CFG_CACHELINE_SIZE; \
- /* kseg0 mem address */ \
- li a1, 0; \
- li a3, CFG_CACHE_SETS * CFG_CACHE_WAYS; \
-1: \
- /* store tag (invalid, not locked) */ \
- cache 0x8, 0(a1); \
- cache 0x9, 0(a1); \
- \
- add a3, -1; \
- bne a3, zero, 1b; \
- add a1, a2; \
- \
- /* set WST bit */ \
- mfc0 a0, CP0_ECC; \
- li a1, ECCF_WST; \
- or a0, a1; \
- mtc0 a0, CP0_ECC; \
- \
- li a0, K0BASE; \
- move a2, t3; /* dcacheSize */ \
- move a3, t5; /* dcacheLineSize */ \
- move a1, a2; \
- icacheop(a0,a1,a2,a3,(Index_Store_Tag_D)); \
- \
- /* clear WST bit */ \
- mfc0 a0, CP0_ECC; \
- li a1, ~ECCF_WST; \
- and a0, a1; \
- mtc0 a0, CP0_ECC;
-
+++ /dev/null
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-#include <common.h>
-#include <asm-mips/danube.h>
-
-
-
-/*******************************************************************************
-*
-* get_cpuclk - returns the frequency of the CPU.
-*
-* NOTE:
-* This functions should be used by the hardware driver to get the correct
-* frequency of the CPU.
-*/
-
-unsigned int danube_get_ddr_hz(void)
-{
- switch((*DANUBE_CGU_SYS) & 0x3){
- case 0:
- default:
- return 166666667;
- case 1:
- return 133333333;
- case 2:
- return 111111111;
- case 3:
- return 83333333;
- }
-}
-
-
-uint danube_get_cpuclk(void)
-{
-#ifdef CONFIG_USE_EMULATOR
- return EMULATOR_CPU_SPEED;
-#else //NOT CONFIG_USE_EMULATOR
- unsigned int ddr_clock=danube_get_ddr_hz();
- switch((*DANUBE_CGU_SYS) & 0xc){
- case 0:
- default:
- return 333333333;
- case 4:
- return ddr_clock;
- case 8:
- return ddr_clock << 1;
- }
-#endif
-}
-
-
-uint danube_get_fpiclk(void)
-{
-#ifdef CONFIG_USE_EMULATOR
- unsigned int clkCPU;
- clkCPU = danube_get_cpu_hz();
- return clkCPU >> 2;
-#else //NOT CONFIG_USE_EMULATOR
- unsigned int ddr_clock=danube_get_ddr_hz();
- if ((*DANUBE_CGU_SYS) & 0x40){
- return ddr_clock >> 1;
- }
- return ddr_clock;
-#endif
-}
-
-
+++ /dev/null
-
-#define IFX_CPU_RESET \
-{ *DANUBE_RCU_RST_REQ |=1<<30; \
-}
-
+++ /dev/null
-/*
- * IFX Platform Dependent CPU Initializations
- * - for Danube
- */
-
-#define IFX_EBU_BOOTCFG_DWORD \
- .word INFINEON_EBU_BOOTCFG; /* EBU init code, fetched during booting */ \
- .word 0x00000000; /* phases of the flash */
-
-#define IFX_MORE_RESERVED_VECTORS \
- XVECENT(romExcHandle,0x400); /* Int, CauseIV=1 */ \
- RVECENT(romReserved,129); \
- RVECENT(romReserved,130); \
- RVECENT(romReserved,131); \
- RVECENT(romReserved,132); \
- RVECENT(romReserved,133); \
- RVECENT(romReserved,134); \
- RVECENT(romReserved,135); \
- RVECENT(romReserved,136); \
- RVECENT(romReserved,137); \
- RVECENT(romReserved,138); \
- RVECENT(romReserved,139); \
- RVECENT(romReserved,140); \
- RVECENT(romReserved,141); \
- RVECENT(romReserved,142); \
- RVECENT(romReserved,143); \
- RVECENT(romExcHandle,0x480); /* EJTAG debug exception */
-
-#define IFX_RESET_PRECHECK \
- mfc0 k0, CP0_EBASE; \
- and k0, EBASEF_CPUNUM; \
- bne k0, zero, ifx_mips_handler_1; \
- nop;
-
-#define IFX_CPU_EXTRA_INIT \
- mfc0 k0, CP0_CONFIG, 7; \
- li k1, 0x04; \
- or k0, k1; \
- mtc0 k0, CP0_CONFIG, 7;
-
-#define IFX_CACHE_OPER_MODE \
- li t0, CONF_CM_CACHABLE_NO_WA;
-
-/*
- * Stop VCPU
- */
-#define IFX_MIPS_HANDLER_1 \
- wait; \
- b ifx_mips_handler_1; \
- nop;
-
+++ /dev/null
- 0xbf800060 0x7
- 0xbf800010 0x0
- 0xbf800020 0x0
- 0xbf800200 0x02
- 0xbf800210 0x0
-
-;REG32(MC_DC0) = 0x00001B1B;
- 0xbf801000 0x1b1b
-;REG32(MC_DC1) = 0x00000000;
- 0xbf801010 0x0
-;REG32(MC_DC2) = 0x00000000;
- 0xbf801020 0x0
-;REG32(MC_DC3) = 0x00000000;
- 0xbf801030 0x0
-;REG32(MC_DC4) = 0x00000000;
- 0xbf801040 0x0
-;REG32(MC_DC5) = 0x00000200;
- 0xbf801050 0x200
-;REG32(MC_DC6) = 0x00000306;
-; 0xbf801060 0x0306
- 0xbf801060 0x0605
-;REG32(MC_DC7) = 0x00000303;
- 0xbf801070 0x302
-; 0xbf801070 0x0203
-;REG32(MC_DC8) = 0x00000102;
- 0xbf801080 0x102
-;REG32(MC_DC9) = 0x0000070A;
- 0xbf801090 0x70a
-; 0xbf801090 0x608
-;REG32(MC_DC10) = 0x00000203;
- 0xbf8010a0 0x203
-;REG32(MC_DC11) = 0x00000C02;
- 0xbf8010b0 0xc02
-; 0xbf8010b0 0x0a02
-;REG32(MC_DC12) = 0x000001C8;
- 0xbf8010c0 0x1c8
-;REG32(MC_DC13) = 0x00000001;
- 0xbf8010d0 0x1
-;REG32(MC_DC14) = 0x00000000;
- 0xbf8010e0 0x0
-;REG32(MC_DC15) = 0x00000F5F;
-; 0xbf8010f0 0xf5f
- 0xbf8010f0 0xf3c
-;REG32(MC_DC16) = 0x0000C800;
- 0xbf801100 0xc800
-;REG32(MC_DC17) = 0x0000000D;
-; 0xbf801110 0xd
- 0xbf801110 0xd
-;REG32(MC_DC18) = 0x00000300;
- 0xbf801120 0x300
-;REG32(MC_DC19) = 0x00000300;
-; 0xbf801130 0x300
- 0xbf801130 0x200
-;REG32(MC_DC20) = 0x00000A04;
-; 0xbf801140 0xa04
- 0xbf801140 0xa04
-;REG32(MC_DC21) = 0x00001c00;
- 0xbf801150 0xd00
-; 0xbf801150 0x1f00
-;REG32(MC_DC22) = 0x00001E1E;
- 0xbf801160 0xd0d
-; 0xbf801160 0x1f1f
-;REG32(MC_DC23) = 0x00000000;
- 0xbf801170 0x0
-;//Disable ECC
-;REG32(MC_DC24) = 0x0000007F;
-; 0xbf801180 0x7f
- 0xbf801180 0x062
-; 0xbf801180 0x37f
-;REG32(MC_DC25) = 0x00000000;
- 0xbf801190 0x0
-;REG32(MC_DC26) = 0x00000000;
- 0xbf8011a0 0x0
-;REG32(MC_DC27) = 0x00000000;
- 0xbf8011b0 0x0
-;REG32(MC_DC28) = 0x00000A24;
-; 0xbf8011c0 0xa24
- 0xbf8011c0 0x510
-;REG32(MC_DC29) = 0x00002D89;
- 0xbf8011d0 0x2d89
-; 0xbf8011d0 0x2d92
-;REG32(MC_DC30) = 0x00000022;
- 0xbf8011e0 0x8300
-; 0xbf8011e0 0x8235
-;REG32(MC_DC31) = 0x00000000;
- 0xbf8011f0 0x0
-;REG32(MC_DC32) = 0x00000000;
- 0xbf801200 0x0
-;REG32(MC_DC33) = 0x00000000;
- 0xbf801210 0x0
-;REG32(MC_DC34) = 0x00000000;
- 0xbf801220 0x0
-;REG32(MC_DC35) = 0x00000000;
- 0xbf801230 0x0
-;REG32(MC_DC36) = 0x00000000;
- 0xbf801240 0x0
-;REG32(MC_DC37) = 0x00000000;
- 0xbf801250 0x0
-;REG32(MC_DC38) = 0x00000000;
- 0xbf801260 0x0
-;REG32(MC_DC39) = 0x00000000;
- 0xbf801270 0x0
-;REG32(MC_DC40) = 0x00000000;
- 0xbf801280 0x0
-;REG32(MC_DC41) = 0x00000000;
- 0xbf801290 0x0
-;REG32(MC_DC42) = 0x00000000;
- 0xbf8012a0 0x0
-;REG32(MC_DC43) = 0x00000000;
- 0xbf8012b0 0x0
-;REG32(MC_DC44) = 0x00000000;
- 0xbf8012c0 0x0
-;REG32(MC_DC45) = 0x00000600;
- 0xbf8012d0 0x500
-;REG32(MC_DC46) = 0x00000000;
- 0xbf8012e0 0x0
-
- 0xbf800060 0x05
- 0xbf801030 0x100
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
+++ /dev/null
-/*
- * DANUBE internal switch ethernet driver.
- *
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-
-#include <common.h>
-
-#if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI) \
- && defined(CONFIG_DANUBE_SWITCH)
-
-#include <malloc.h>
-#include <net.h>
-#include <asm/danube.h>
-#include <asm/addrspace.h>
-#include <asm/pinstrap.h>
-
-#define MII_MODE 1
-#define REV_MII_MODE 2
-
-#define TX_CHAN_NO 7
-#define RX_CHAN_NO 6
-
-#define NUM_RX_DESC PKTBUFSRX
-#define NUM_TX_DESC 8
-#define MAX_PACKET_SIZE 1536
-#define TOUT_LOOP 100
-#define PHY0_ADDR 1 /*fixme: set the correct value here*/
-
-#define DMA_WRITE_REG(reg, value) *((volatile u32 *)reg) = (u32)value
-#define DMA_READ_REG(reg, value) value = (u32)*((volatile u32*)reg)
-
-#define SW_WRITE_REG(reg, value) *((volatile u32*)reg) = (u32)value
-#define SW_READ_REG(reg, value) value = (u32)*((volatile u32*)reg)
-
-#define TANTOS_CHIP_ID 0x2599
-
-typedef struct
-{
- union
- {
- struct
- {
- volatile u32 OWN :1;
- volatile u32 C :1;
- volatile u32 Sop :1;
- volatile u32 Eop :1;
- volatile u32 reserved :3;
- volatile u32 Byteoffset :2;
- volatile u32 reserve :7;
- volatile u32 DataLen :16;
- }field;
-
- volatile u32 word;
- }status;
-
- volatile u32 DataPtr;
-} danube_rx_descriptor_t;
-
-typedef struct
-{
- union
- {
- struct
- {
- volatile u32 OWN :1;
- volatile u32 C :1;
- volatile u32 Sop :1;
- volatile u32 Eop :1;
- volatile u32 Byteoffset :5;
- volatile u32 reserved :7;
- volatile u32 DataLen :16;
- }field;
-
- volatile u32 word;
- }status;
-
- volatile u32 DataPtr;
-} danube_tx_descriptor_t;
-
-
-
-
-static danube_rx_descriptor_t rx_des_ring[NUM_RX_DESC] __attribute__ ((aligned(8)));
-static danube_tx_descriptor_t tx_des_ring[NUM_TX_DESC] __attribute__ ((aligned(8)));
-static int tx_num, rx_num;
-
-int danube_switch_init(struct eth_device *dev, bd_t * bis);
-int danube_switch_send(struct eth_device *dev, volatile void *packet,int length);
-int danube_switch_recv(struct eth_device *dev);
-void danube_switch_halt(struct eth_device *dev);
-static void danube_init_switch_chip(int mode);
-static void danube_dma_init(void);
-
-
-
-int danube_switch_initialize(bd_t * bis)
-{
- struct eth_device *dev;
- unsigned short chipid;
-
-#if 0
- printf("Entered danube_switch_initialize()\n");
-#endif
-
- if (!(dev = (struct eth_device *) malloc (sizeof *dev)))
- {
- printf("Failed to allocate memory\n");
- return 0;
- }
- memset(dev, 0, sizeof(*dev));
-
- danube_dma_init();
- danube_init_switch_chip(REV_MII_MODE);
-
-#ifdef CLK_OUT2_25MHZ
- *DANUBE_GPIO_P0_DIR=0x0000ae78;
- *DANUBE_GPIO_P0_ALTSEL0=0x00008078;
- //joelin for Mii-1 *DANUBE_GPIO_P0_ALTSEL1=0x80000080;
- *DANUBE_GPIO_P0_ALTSEL1=0x80000000; //joelin for Mii-1
- *DANUBE_CGU_IFCCR=0x00400010;
- *DANUBE_GPIO_P0_OD=0x0000ae78;
-#endif
-
- /*patch for 6996*/
-
- *DANUBE_RCU_RST_REQ |=1;
- mdelay(200);
- *DANUBE_RCU_RST_REQ &=(unsigned long)~1;
- mdelay(1);
- /*while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
- *DANUBE_PPE_ETOP_MDIO_ACC =0x80123602;
- */
- /*while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
- *DANUBE_PPE_ETOP_MDIO_ACC =0x80123602;
- */
- /***************/
- sprintf(dev->name, "danube Switch");
- dev->init = danube_switch_init;
- dev->halt = danube_switch_halt;
- dev->send = danube_switch_send;
- dev->recv = danube_switch_recv;
-
- eth_register(dev);
-
- while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
- *DANUBE_PPE_ETOP_MDIO_ACC =0xc1010000;
- while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
- chipid = (unsigned short)(*DANUBE_PPE_ETOP_MDIO_ACC & 0xffff);
-
- if (chipid != TANTOS_CHIP_ID) // not tantos switch.
- {
- while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
- *DANUBE_PPE_ETOP_MDIO_ACC =0x8001840F;
- while((*DANUBE_PPE_ETOP_MDIO_ACC)&0x80000000);
- *DANUBE_PPE_ETOP_MDIO_ACC =0x8003840F;
- while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
- *DANUBE_PPE_ETOP_MDIO_ACC =0x8005840F;
- //while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
- //*DANUBE_PPE_ETOP_MDIO_ACC =0x8006840F;
- while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
- *DANUBE_PPE_ETOP_MDIO_ACC =0x8007840F;
- while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
- *DANUBE_PPE_ETOP_MDIO_ACC =0x8008840F;
- while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
- *DANUBE_PPE_ETOP_MDIO_ACC =0x8001840F;
- while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
- *DANUBE_PPE_ETOP_MDIO_ACC =0x80123602;
-#ifdef CLK_OUT2_25MHZ
- while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
- *DANUBE_PPE_ETOP_MDIO_ACC =0x80334000;
-#endif
- }
- else // Tantos switch chip
- {
- //printf("Tantos Switch detected!!\n\r");
-
- while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
- *DANUBE_PPE_ETOP_MDIO_ACC =0x80a10004;
-
- while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
- *DANUBE_PPE_ETOP_MDIO_ACC =0x80c10004;
-
- while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
- *DANUBE_PPE_ETOP_MDIO_ACC =0x80f50773;
-
- /* Software workaround. */
- /* PHY reset from P0 to P4. */
- while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
-
- mdelay(1);
- *DANUBE_PPE_ETOP_MDIO_ACC =0x81218000;
- while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
- mdelay(1);
- /* P0 */
- *DANUBE_PPE_ETOP_MDIO_ACC =0x81200400;
- while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
- mdelay(1);
- /* P1 */
- *DANUBE_PPE_ETOP_MDIO_ACC =0x81200420;
- while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
- mdelay(1);
- /* P2 */
- *DANUBE_PPE_ETOP_MDIO_ACC =0x81200440;
- while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
- mdelay(1);
- /* P3 */
- *DANUBE_PPE_ETOP_MDIO_ACC =0x81200460;
- while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
- mdelay(1);
- /* p4 */
- *DANUBE_PPE_ETOP_MDIO_ACC =0x81200480;
- while(*DANUBE_PPE_ETOP_MDIO_ACC&0x80000000);
- mdelay(1);
- }
-
- return 1;
-}
-
-int danube_switch_init(struct eth_device *dev, bd_t * bis)
-{
- int i;
-
- tx_num=0;
- rx_num=0;
-
- /* Reset DMA */
-// serial_puts("i \n\0");
-
- *DANUBE_DMA_CS=RX_CHAN_NO;
- *DANUBE_DMA_CCTRL=0x2;/*fix me, need to reset this channel first?*/
- *DANUBE_DMA_CPOLL= 0x80000040;
- /*set descriptor base*/
- *DANUBE_DMA_CDBA=(u32)rx_des_ring;
- *DANUBE_DMA_CDLEN=NUM_RX_DESC;
- *DANUBE_DMA_CIE = 0;
- *DANUBE_DMA_CCTRL=0x30000;
-
- *DANUBE_DMA_CS=TX_CHAN_NO;
- *DANUBE_DMA_CCTRL=0x2;/*fix me, need to reset this channel first?*/
- *DANUBE_DMA_CPOLL= 0x80000040;
- *DANUBE_DMA_CDBA=(u32)tx_des_ring;
- *DANUBE_DMA_CDLEN=NUM_TX_DESC;
- *DANUBE_DMA_CIE = 0;
- *DANUBE_DMA_CCTRL=0x30100;
-
- for(i=0;i < NUM_RX_DESC; i++)
- {
- danube_rx_descriptor_t * rx_desc = KSEG1ADDR(&rx_des_ring[i]);
- rx_desc->status.word=0;
- rx_desc->status.field.OWN=1;
- rx_desc->status.field.DataLen=PKTSIZE_ALIGN; /* 1536 */
- rx_desc->DataPtr=(u32)KSEG1ADDR(NetRxPackets[i]);
- }
-
- for(i=0;i < NUM_TX_DESC; i++)
- {
- danube_tx_descriptor_t * tx_desc = KSEG1ADDR(&tx_des_ring[i]);
- memset(tx_desc, 0, sizeof(tx_des_ring[0]));
- }
- /* turn on DMA rx & tx channel
- */
- *DANUBE_DMA_CS=RX_CHAN_NO;
- *DANUBE_DMA_CCTRL|=1;/*reset and turn on the channel*/
-
- return 0;
-}
-
-void danube_switch_halt(struct eth_device *dev)
-{
- int i;
- for(i=0;i<8;i++)
- {
- *DANUBE_DMA_CS=i;
- *DANUBE_DMA_CCTRL&=~1;/*stop the dma channel*/
- }
-// udelay(1000000);
-}
-
-int danube_switch_send(struct eth_device *dev, volatile void *packet,int length)
-{
-
- int i;
- int res = -1;
-
- danube_tx_descriptor_t * tx_desc= KSEG1ADDR(&tx_des_ring[tx_num]);
-
- if (length <= 0)
- {
- printf ("%s: bad packet size: %d\n", dev->name, length);
- goto Done;
- }
-
- for(i=0; tx_desc->status.field.OWN==1; i++)
- {
- if(i>=TOUT_LOOP)
- {
- printf("NO Tx Descriptor...");
- goto Done;
- }
- }
-
- //serial_putc('s');
-
- tx_desc->status.field.Sop=1;
- tx_desc->status.field.Eop=1;
- tx_desc->status.field.C=0;
- tx_desc->DataPtr = (u32)KSEG1ADDR(packet);
- if(length<60)
- tx_desc->status.field.DataLen = 60;
- else
- tx_desc->status.field.DataLen = (u32)length;
-
- asm("SYNC");
- tx_desc->status.field.OWN=1;
-
- res=length;
- tx_num++;
- if(tx_num==NUM_TX_DESC) tx_num=0;
- *DANUBE_DMA_CS=TX_CHAN_NO;
-
- if(!(*DANUBE_DMA_CCTRL & 1))
- *DANUBE_DMA_CCTRL|=1;
-
-Done:
- return res;
-}
-
-int danube_switch_recv(struct eth_device *dev)
-{
- int length = 0;
- danube_rx_descriptor_t * rx_desc;
-
- for (;;)
- {
- rx_desc = KSEG1ADDR(&rx_des_ring[rx_num]);
-
- if ((rx_desc->status.field.C == 0) || (rx_desc->status.field.OWN == 1))
- {
- break;
- }
-
- length = rx_desc->status.field.DataLen;
- if (length)
- {
- NetReceive((void*)KSEG1ADDR(NetRxPackets[rx_num]), length - 4);
- // serial_putc('*');
- }
- else
- {
- printf("Zero length!!!\n");
- }
-
- rx_desc->status.field.Sop=0;
- rx_desc->status.field.Eop=0;
- rx_desc->status.field.C=0;
- rx_desc->status.field.DataLen=PKTSIZE_ALIGN;
- rx_desc->status.field.OWN=1;
- rx_num++;
- if(rx_num==NUM_RX_DESC) rx_num=0;
-
- }
-
- return length;
-}
-
-
-static void danube_init_switch_chip(int mode)
-{
- /*get and set mac address for MAC*/
- char *tmp;
- tmp = getenv ("ethaddr");
- if (NULL == tmp) {
- printf("Can't get environment ethaddr!!!\n");
- // return NULL;
- } else {
- printf("ethaddr=%s\n", tmp);
- }
- *DANUBE_PMU_PWDCR = *DANUBE_PMU_PWDCR & 0xFFFFEFDF;
- *DANUBE_PPE32_ETOP_MDIO_CFG &= ~0x6;
- *DANUBE_PPE32_ENET_MAC_CFG = 0x187;
-
- // turn on port0, set to rmii and turn off port1.
- if (mode==REV_MII_MODE)
- {
- *DANUBE_PPE32_ETOP_CFG = (*DANUBE_PPE32_ETOP_CFG & 0xfffffffc) | 0x0000000a;
- }
- else if (mode == MII_MODE)
- {
- *DANUBE_PPE32_ETOP_CFG = (*DANUBE_PPE32_ETOP_CFG & 0xfffffffc) | 0x00000008;
- }
-
- *DANUBE_PPE32_ETOP_IG_PLEN_CTRL = 0x4005ee; // set packetlen.
- *ENET_MAC_CFG |= 1<<11; /*enable the crc*/
- return;
-}
-
-
-static void danube_dma_init(void)
-{
-// serial_puts("d \n\0");
-
- *DANUBE_PMU_PWDCR &=~(1<<DANUBE_PMU_DMA_SHIFT);/*enable DMA from PMU*/
- /* Reset DMA */
- *DANUBE_DMA_CTRL|=1;
- *DANUBE_DMA_IRNEN=0;/*disable all the interrupts first*/
-
- /* Clear Interrupt Status Register */
- *DANUBE_DMA_IRNCR=0xfffff;
- /*disable all the dma interrupts*/
- *DANUBE_DMA_IRNEN=0;
- /*disable channel 0 and channel 1 interrupts*/
-
- *DANUBE_DMA_CS=RX_CHAN_NO;
- *DANUBE_DMA_CCTRL=0x2;/*fix me, need to reset this channel first?*/
- *DANUBE_DMA_CPOLL= 0x80000040;
- /*set descriptor base*/
- *DANUBE_DMA_CDBA=(u32)rx_des_ring;
- *DANUBE_DMA_CDLEN=NUM_RX_DESC;
- *DANUBE_DMA_CIE = 0;
- *DANUBE_DMA_CCTRL=0x30000;
-
- *DANUBE_DMA_CS=TX_CHAN_NO;
- *DANUBE_DMA_CCTRL=0x2;/*fix me, need to reset this channel first?*/
- *DANUBE_DMA_CPOLL= 0x80000040;
- *DANUBE_DMA_CDBA=(u32)tx_des_ring;
- *DANUBE_DMA_CDLEN=NUM_TX_DESC;
- *DANUBE_DMA_CIE = 0;
- *DANUBE_DMA_CCTRL=0x30100;
- /*enable the poll function and set the poll counter*/
- //*DANUBE_DMA_CPOLL=DANUBE_DMA_POLL_EN | (DANUBE_DMA_POLL_COUNT<<4);
- /*set port properties, enable endian conversion for switch*/
- *DANUBE_DMA_PS=0;
- *DANUBE_DMA_PCTRL|=0xf<<8;/*enable 32 bit endian conversion*/
-
- return;
-}
-
-#endif
+++ /dev/null
-#!/usr/bin/perl
-my $aline;
-my $lineid;
-my $length;
-my $address;
-my @bytes;
-my $addstr;
-my $chsum=0;
-my $count=0;
-my $firstime=1;
-my $i;
-my $currentaddr;
-my $tmp;
-my $holder="";
-my $loadaddr;
-
-if(@ARGV < 2){
- print "\n not enough arguments";
- print "\n Syntax: ./program_SDRAM input output\n";
-}
-
-open(INFILE1, "<$ARGV[0]") || die("\ninput open fail\n");
-open(INFILE2, "<$ARGV[1]") || die("\ninput open fail\n");
-open(OUTFILE, ">$ARGV[2]") || die("\nOutput file open fail\n");
-
-$i=0;
-while ($line = <INFILE1>){
- if($line=~/\w/){
- if($line!~/[;#\*]/){
- if($i eq 0){
- printf OUTFILE ("33333333");
- }
- chomp($line);
- $line=~s/\t//;
- @array=split(/ +/,$line);
- $j=0;
- while(@array[$j]!~/\w/)
- {
- $j=$j+1;
-
- }
- $addr=@array[$j];
- $regval=@array[$j+1];
- $addr=~s/0x//;
- $regval=~s/0x//;
- printf OUTFILE ("%08x%08x",hex($addr),hex($regval));
- $i=$i+1;
- if($i eq 8)
- {
- $i=0;
- printf OUTFILE ("\n");
- }
-
- }
- }
-
- }
-
- while($i lt 8 && $i gt 0){
- printf OUTFILE "00"x8;
- $i=$i+1;
- }
- if($i eq 8){
- printf OUTFILE ("\n");
- }
-
-while($aline=<INFILE2>){
- $aline=uc($aline);
- chomp($aline);
- next if(($aline=~/^S0/) || ($aline=~/^S7/));
- ($lineid, $length, $address, @bytes) = unpack"A2A2A8"."A2"x300, $aline;
- $length = hex($length);
- $address = hex($address);
- $length -=5;
- $i=0;
-
- while($length>0){
- if($firstime==1){
- $addstr = sprintf("%x", $address);
- $addstr = "0"x(8-length($addstr)).$addstr;
- print OUTFILE $addstr;
- addchsum($addstr);
- $firstime=0;
- $currentaddr=$address;
- $loadaddr = $addstr;
- }
- else{
- if($count==64){
- $addstr = sprintf("%x", $currentaddr);
- $addstr = "0"x(8-length($addstr)).$addstr;
- print OUTFILE $addstr;
- addchsum($addstr);
- $count=0;
- }
- }
- while($count<64){
- $bytes[$i]=~tr/ABCDEF/abcdef/;
- print OUTFILE "$bytes[$i]";
- addchsum($bytes[$i]);
- $i++;
- $count++;
- $length--;
- last if($length==0);
- }
- if($count==64){
- print OUTFILE "\n";
- #print OUTFILE "\r";
- $currentaddr+=64;
- }
- }
-}
-if($count != 64){
- $tmp = "00";
- for($i=0;$i<(64-$count);$i++){
- print OUTFILE "00";
- addchsum($tmp);
- }
- print OUTFILE "\n";
- #print OUTFILE "\r";
-}
-
-
-print OUTFILE "11"x4;
-use integer;
-$chsum=$chsum & 0xffffffff;
-$chsum = sprintf("%X", $chsum);
-$chsum = "0"x(8-length($chsum)).$chsum;
-$chsum =~tr/ABCDEF/abcdef/;
-print OUTFILE $chsum;
-print OUTFILE "00"x60;
-print OUTFILE "\n";
-#print OUTFILE "\r";
-
-print OUTFILE "99"x4;
-print OUTFILE $loadaddr;
-print OUTFILE "00"x60;
-print OUTFILE "\n";
-#print OUTFILE "\r";
-
-
-close OUTFILE;
-#END of Program
-
-
-
-sub addchsum{
- my $cc=$_[0];
- $holder=$holder.$cc;
- if(length($holder)==8){
- $holder = hex($holder);
- $chsum+=$holder;
- $holder="";
- }
-}
-#END
-
-
+++ /dev/null
-/*
- LzmaDecode.h
- LZMA Decoder interface
-
- LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01)
- http://www.7-zip.org/
-
- LZMA SDK is licensed under two licenses:
- 1) GNU Lesser General Public License (GNU LGPL)
- 2) Common Public License (CPL)
- It means that you can select one of these two licenses and
- follow rules of that license.
-
- SPECIAL EXCEPTION:
- Igor Pavlov, as the author of this code, expressly permits you to
- statically or dynamically link your code (or bind by name) to the
- interfaces of this file without subjecting your linked code to the
- terms of the CPL or GNU LGPL. Any modifications or additions
- to this file, however, are subject to the LGPL or CPL terms.
-*/
-
-#ifndef __LZMADECODE_H
-#define __LZMADECODE_H
-
-#include "LzmaTypes.h"
-
-/* #define _LZMA_IN_CB */
-/* Use callback for input data */
-
-/* #define _LZMA_OUT_READ */
-/* Use read function for output data */
-
-/* #define _LZMA_PROB32 */
-/* It can increase speed on some 32-bit CPUs,
- but memory usage will be doubled in that case */
-
-/* #define _LZMA_LOC_OPT */
-/* Enable local speed optimizations inside code */
-
-#ifdef _LZMA_PROB32
-#define CProb UInt32
-#else
-#define CProb UInt16
-#endif
-
-#define LZMA_RESULT_OK 0
-#define LZMA_RESULT_DATA_ERROR 1
-
-#ifdef _LZMA_IN_CB
-typedef struct _ILzmaInCallback
-{
- int (*Read)(void *object, const unsigned char **buffer, SizeT *bufferSize);
-} ILzmaInCallback;
-#endif
-
-#define LZMA_BASE_SIZE 1846
-#define LZMA_LIT_SIZE 768
-
-#define LZMA_PROPERTIES_SIZE 5
-
-typedef struct _CLzmaProperties
-{
- int lc;
- int lp;
- int pb;
- #ifdef _LZMA_OUT_READ
- UInt32 DictionarySize;
- #endif
-}CLzmaProperties;
-
-int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size);
-
-#define LzmaGetNumProbs(Properties) (LZMA_BASE_SIZE + (LZMA_LIT_SIZE << ((Properties)->lc + (Properties)->lp)))
-
-#define kLzmaNeedInitId (-2)
-
-typedef struct _CLzmaDecoderState
-{
- CLzmaProperties Properties;
- CProb *Probs;
-
- #ifdef _LZMA_IN_CB
- const unsigned char *Buffer;
- const unsigned char *BufferLim;
- #endif
-
- #ifdef _LZMA_OUT_READ
- unsigned char *Dictionary;
- UInt32 Range;
- UInt32 Code;
- UInt32 DictionaryPos;
- UInt32 GlobalPos;
- UInt32 DistanceLimit;
- UInt32 Reps[4];
- int State;
- int RemainLen;
- unsigned char TempDictionary[4];
- #endif
-} CLzmaDecoderState;
-
-#ifdef _LZMA_OUT_READ
-#define LzmaDecoderInit(vs) { (vs)->RemainLen = kLzmaNeedInitId; }
-#endif
-
-int LzmaDecode(CLzmaDecoderState *vs,
- #ifdef _LZMA_IN_CB
- ILzmaInCallback *inCallback,
- #else
- const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
- #endif
- unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed);
-
-#endif
+++ /dev/null
-/*
-LzmaTypes.h
-
-Types for LZMA Decoder
-
-This file written and distributed to public domain by Igor Pavlov.
-This file is part of LZMA SDK 4.40 (2006-05-01)
-*/
-
-#ifndef __LZMATYPES_H
-#define __LZMATYPES_H
-
-#ifndef _7ZIP_BYTE_DEFINED
-#define _7ZIP_BYTE_DEFINED
-typedef unsigned char Byte;
-#endif
-
-#ifndef _7ZIP_UINT16_DEFINED
-#define _7ZIP_UINT16_DEFINED
-typedef unsigned short UInt16;
-#endif
-
-#ifndef _7ZIP_UINT32_DEFINED
-#define _7ZIP_UINT32_DEFINED
-#ifdef _LZMA_UINT32_IS_ULONG
-typedef unsigned long UInt32;
-#else
-typedef unsigned int UInt32;
-#endif
-#endif
-
-/* #define _LZMA_SYSTEM_SIZE_T */
-/* Use system's size_t. You can use it to enable 64-bit sizes supporting */
-
-#ifndef _7ZIP_SIZET_DEFINED
-#define _7ZIP_SIZET_DEFINED
-#ifdef _LZMA_SYSTEM_SIZE_T
-#include <stddef.h>
-typedef size_t SizeT;
-#else
-typedef UInt32 SizeT;
-#endif
-#endif
-
-#endif
+++ /dev/null
-/******************************************************************************
-**
-** FILE NAME : LzmaWrapper.h
-** PROJECT : bootloader
-** MODULES : U-boot
-**
-** DATE : 2 Nov 2006
-** AUTHOR : Lin Mars
-** DESCRIPTION : LZMA decoder support for U-boot 1.1.5
-** COPYRIGHT : Copyright (c) 2006
-** Infineon Technologies AG
-** Am Campeon 1-12, 85579 Neubiberg, Germany
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
-** HISTORY
-** $Date $Author $Comment
-** 2 Nov 2006 Lin Mars init version which derived from LzmaTest.c from
-** LZMA v4.43 SDK
-*******************************************************************************/
-#ifndef __LZMA_WRAPPER_H__
-#define __LZMA_WRAPPER_H__
-
-#ifndef LZMA_RESULT_OK
-#define LZMA_RESULT_OK 0
-#endif
-#ifndef LZMA_RESULT_DATA_ERROR
-#define LZMA_RESULT_DATA_ERROR 1
-#endif
-
-extern int lzma_inflate(unsigned char *source, int s_len, unsigned char *dest, int *d_len);
-
-#endif /*__LZMA_WRAPPER_H__*/
+++ /dev/null
-#ifndef DANUBE_H
-#define DANUBE_H
-/******************************************************************************
- Copyright (c) 2002, Infineon Technologies. All rights reserved.
-
- No Warranty
- Because the program is licensed free of charge, there is no warranty for
- the program, to the extent permitted by applicable law. Except when
- otherwise stated in writing the copyright holders and/or other parties
- provide the program "as is" without warranty of any kind, either
- expressed or implied, including, but not limited to, the implied
- warranties of merchantability and fitness for a particular purpose. The
- entire risk as to the quality and performance of the program is with
- you. should the program prove defective, you assume the cost of all
- necessary servicing, repair or correction.
-
- In no event unless required by applicable law or agreed to in writing
- will any copyright holder, or any other party who may modify and/or
- redistribute the program as permitted above, be liable to you for
- damages, including any general, special, incidental or consequential
- damages arising out of the use or inability to use the program
- (including but not limited to loss of data or data being rendered
- inaccurate or losses sustained by you or third parties or a failure of
- the program to operate with any other programs), even if such holder or
- other party has been advised of the possibility of such damages.
-******************************************************************************/
-
-/***********************************************************************/
-/* Module : MEI register address and bits */
-/***********************************************************************/
-#define MEI_SPACE_ACCESS 0xB0100C00
-#define MEI_DATA_XFR (0x0000 + MEI_SPACE_ACCESS)
-#define MEI_VERSION (0x0200 + MEI_SPACE_ACCESS)
-#define ARC_GP_STAT (0x0204 + MEI_SPACE_ACCESS)
-#define MEI_XFR_ADDR (0x020C + MEI_SPACE_ACCESS)
-#define MEI_TO_ARC_INT (0x021C + MEI_SPACE_ACCESS)
-#define ARC_TO_MEI_INT (0x0220 + MEI_SPACE_ACCESS)
-#define ARC_TO_MEI_INT_MASK (0x0224 + MEI_SPACE_ACCESS)
-#define MEI_DEBUG_WAD (0x0228 + MEI_SPACE_ACCESS)
-#define MEI_DEBUG_RAD (0x022C + MEI_SPACE_ACCESS)
-#define MEI_DEBUG_DATA (0x0230 + MEI_SPACE_ACCESS)
-#define MEI_DEBUG_DEC (0x0234 + MEI_SPACE_ACCESS)
-#define MEI_CONTROL (0x0238 + MEI_SPACE_ACCESS)
-#define AT_CELLRDY_BC0 (0x023C + MEI_SPACE_ACCESS)
-#define AT_CELLRDY_BC1 (0x0240 + MEI_SPACE_ACCESS)
-#define AR_CELLRDY_BC0 (0x0244 + MEI_SPACE_ACCESS)
-#define AR_CELLRDY_BC1 (0x0248 + MEI_SPACE_ACCESS)
-#define AAI_ACCESS (0x024C + MEI_SPACE_ACCESS)
-#define AAITXCB0 (0x0300 + MEI_SPACE_ACCESS)
-#define AAITXCB1 (0x0304 + MEI_SPACE_ACCESS)
-#define AAIRXCB0 (0x0308 + MEI_SPACE_ACCESS)
-#define AAIRXCB1 (0x030C + MEI_SPACE_ACCESS)
-
-
-/***********************************************************************/
-/* Module : WDT register address and bits */
-/***********************************************************************/
-#define DANUBE_BIU_WDT_BASE (0xBf8803F0)
-#define DANUBE_BIU_WDT_CR (0x0000 + DANUBE_BIU_WDT_BASE)
-#define DANUBE_BIU_WDT_SR (0x0008 + DANUBE_BIU_WDT_BASE)
-
-
-/***********************************************************************/
-/* Module : PMU register address and bits */
-/***********************************************************************/
-#define DANUBE_PMU_BASE_ADDR (KSEG1+0x1F102000)
-
-/***PM Control Register***/
-#define DANUBE_PMU_CR ((volatile u32*)(0x001C + DANUBE_PMU_BASE_ADDR))
-#define DANUBE_PMU_PWDCR DANUBE_PMU_CR
-#define DANUBE_PMU_SR ((volatile u32*)(0x0020 + DANUBE_PMU_BASE_ADDR))
-
-#define DANUBE_PMU_DMA_SHIFT 5
-#define DANUBE_PMU_PPE_SHIFT 13
-#define DANUBE_PMU_ETOP_SHIFT 22
-#define DANUBE_PMU_ENET0_SHIFT 24
-#define DANUBE_PMU_ENET1_SHIFT 25
-
-
-#define DANUBE_PMU DANUBE_PMU_BASE_ADDR
-/***PM Global Enable Register***/
-#define DANUBE_PMU_PM_GEN ((volatile u32*)(DANUBE_PMU+ 0x0000))
-#define DANUBE_PMU_PM_GEN_EN16 (1 << 16)
-#define DANUBE_PMU_PM_GEN_EN15 (1 << 15)
-#define DANUBE_PMU_PM_GEN_EN14 (1 << 14)
-#define DANUBE_PMU_PM_GEN_EN13 (1 << 13)
-#define DANUBE_PMU_PM_GEN_EN12 (1 << 12)
-#define DANUBE_PMU_PM_GEN_EN11 (1 << 11)
-#define DANUBE_PMU_PM_GEN_EN10 (1 << 10)
-#define DANUBE_PMU_PM_GEN_EN9 (1 << 9)
-#define DANUBE_PMU_PM_GEN_EN8 (1 << 8)
-#define DANUBE_PMU_PM_GEN_EN7 (1 << 7)
-#define DANUBE_PMU_PM_GEN_EN6 (1 << 6)
-#define DANUBE_PMU_PM_GEN_EN5 (1 << 5)
-#define DANUBE_PMU_PM_GEN_EN4 (1 << 4)
-#define DANUBE_PMU_PM_GEN_EN3 (1 << 3)
-#define DANUBE_PMU_PM_GEN_EN2 (1 << 2)
-#define DANUBE_PMU_PM_GEN_EN0 (1 << 0)
-
-/***PM Power Down Enable Register***/
-#define DANUBE_PMU_PM_PDEN ((volatile u32*)(DANUBE_PMU+ 0x0008))
-#define DANUBE_PMU_PM_PDEN_EN16 (1 << 16)
-#define DANUBE_PMU_PM_PDEN_EN15 (1 << 15)
-#define DANUBE_PMU_PM_PDEN_EN14 (1 << 14)
-#define DANUBE_PMU_PM_PDEN_EN13 (1 << 13)
-#define DANUBE_PMU_PM_PDEN_EN12 (1 << 12)
-#define DANUBE_PMU_PM_PDEN_EN11 (1 << 11)
-#define DANUBE_PMU_PM_PDEN_EN10 (1 << 10)
-#define DANUBE_PMU_PM_PDEN_EN9 (1 << 9)
-#define DANUBE_PMU_PM_PDEN_EN8 (1 << 8)
-#define DANUBE_PMU_PM_PDEN_EN7 (1 << 7)
-#define DANUBE_PMU_PM_PDEN_EN5 (1 << 5)
-#define DANUBE_PMU_PM_PDEN_EN4 (1 << 4)
-#define DANUBE_PMU_PM_PDEN_EN3 (1 << 3)
-#define DANUBE_PMU_PM_PDEN_EN2 (1 << 2)
-#define DANUBE_PMU_PM_PDEN_EN0 (1 << 0)
-
-/***PM Wake-Up from Power Down Register***/
-#define DANUBE_PMU_PM_WUP ((volatile u32*)(DANUBE_PMU+ 0x0010))
-#define DANUBE_PMU_PM_WUP_WUP16 (1 << 16)
-#define DANUBE_PMU_PM_WUP_WUP15 (1 << 15)
-#define DANUBE_PMU_PM_WUP_WUP14 (1 << 14)
-#define DANUBE_PMU_PM_WUP_WUP13 (1 << 13)
-#define DANUBE_PMU_PM_WUP_WUP12 (1 << 12)
-#define DANUBE_PMU_PM_WUP_WUP11 (1 << 11)
-#define DANUBE_PMU_PM_WUP_WUP10 (1 << 10)
-#define DANUBE_PMU_PM_WUP_WUP9 (1 << 9)
-#define DANUBE_PMU_PM_WUP_WUP8 (1 << 8)
-#define DANUBE_PMU_PM_PDEN_EN7 (1 << 7)
-#define DANUBE_PMU_PM_PDEN_EN5 (1 << 5)
-#define DANUBE_PMU_PM_PDEN_EN4 (1 << 4)
-#define DANUBE_PMU_PM_PDEN_EN3 (1 << 3)
-#define DANUBE_PMU_PM_PDEN_EN2 (1 << 2)
-#define DANUBE_PMU_PM_PDEN_EN0 (1 << 0)
-
-/***PM Wake-Up from Power Down Register***/
-#define DANUBE_PMU_PM_WUP ((volatile u32*)(DANUBE_PMU+ 0x0010))
-#define DANUBE_PMU_PM_WUP_WUP16 (1 << 16)
-#define DANUBE_PMU_PM_WUP_WUP15 (1 << 15)
-#define DANUBE_PMU_PM_WUP_WUP14 (1 << 14)
-#define DANUBE_PMU_PM_WUP_WUP13 (1 << 13)
-#define DANUBE_PMU_PM_WUP_WUP12 (1 << 12)
-#define DANUBE_PMU_PM_WUP_WUP11 (1 << 11)
-#define DANUBE_PMU_PM_WUP_WUP10 (1 << 10)
-#define DANUBE_PMU_PM_WUP_WUP9 (1 << 9)
-#define DANUBE_PMU_PM_WUP_WUP8 (1 << 8)
-#define DANUBE_PMU_PM_WUP_WUP7 (1 << 7)
-#define DANUBE_PMU_PM_WUP_WUP5 (1 << 5)
-#define DANUBE_PMU_PM_WUP_WUP4 (1 << 4)
-#define DANUBE_PMU_PM_WUP_WUP3 (1 << 3)
-#define DANUBE_PMU_PM_WUP_WUP2 (1 << 2)
-#define DANUBE_PMU_PM_WUP_WUP0 (1 << 0)
-
-/***PM Control Register***/
-#define DANUBE_PMU_PM_CR ((volatile u32*)(DANUBE_PMU+ 0x0014))
-#define DANUBE_PMU_PM_CR_AWEN (1 << 31)
-#define DANUBE_PMU_PM_CR_SWRST (1 << 30)
-#define DANUBE_PMU_PM_CR_SWCR (1 << 2)
-#define DANUBE_PMU_PM_CR_CRD (value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***********************************************************************/
-/* Module : RCU register address and bits */
-/***********************************************************************/
-#define DANUBE_RCU_BASE_ADDR (0xBF203000)
-
-#define DANUBE_RCU_REQ (0x0010 + DANUBE_RCU_BASE_ADDR)
-#define DANUBE_RCU_RST_REQ ((volatile u32*)(DANUBE_RCU_REQ))
-#define DANUBE_RCU_STAT (0x0014 + DANUBE_RCU_BASE_ADDR)
-#define DANUBE_RCU_RST_SR ( (volatile u32 *)(DANUBE_RCU_STAT))
-#define DANUBE_RCU_PCI_RDY ( (volatile u32 *)(DANUBE_RCU_BASE_ADDR+0x28))
-#define DANUBE_RCU_MON (0x0030 + DANUBE_RCU_BASE_ADDR)
-
-
-/***********************************************************************/
-/* Module : BCU register address and bits */
-/***********************************************************************/
-#define DANUBE_BCU_BASE_ADDR (0xB0100000)
-/***BCU Control Register (0010H)***/
-#define DANUBE_BCU_CON (0x0010 + DANUBE_BCU_BASE_ADDR)
-#define DANUBE_BCU_BCU_CON_SPC (value) (((( 1 << 8) - 1) & (value)) << 24)
-#define DANUBE_BCU_BCU_CON_SPE (1 << 19)
-#define DANUBE_BCU_BCU_CON_PSE (1 << 18)
-#define DANUBE_BCU_BCU_CON_DBG (1 << 16)
-#define DANUBE_BCU_BCU_CON_TOUT (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-
-/***BCU Error Control Capture Register (0020H)***/
-#define DANUBE_BCU_ECON (0x0020 + DANUBE_BCU_BASE_ADDR)
-#define DANUBE_BCU_BCU_ECON_TAG (value) (((( 1 << 4) - 1) & (value)) << 24)
-#define DANUBE_BCU_BCU_ECON_RDN (1 << 23)
-#define DANUBE_BCU_BCU_ECON_WRN (1 << 22)
-#define DANUBE_BCU_BCU_ECON_SVM (1 << 21)
-#define DANUBE_BCU_BCU_ECON_ACK (value) (((( 1 << 2) - 1) & (value)) << 19)
-#define DANUBE_BCU_BCU_ECON_ABT (1 << 18)
-#define DANUBE_BCU_BCU_ECON_RDY (1 << 17)
-#define DANUBE_BCU_BCU_ECON_TOUT (1 << 16)
-#define DANUBE_BCU_BCU_ECON_ERRCNT (value) (((( 1 << 16) - 1) & (value)) << 0)
-#define DANUBE_BCU_BCU_ECON_OPC (value) (((( 1 << 4) - 1) & (value)) << 28)
-
-/***BCU Error Address Capture Register (0024 H)***/
-#define DANUBE_BCU_EADD (0x0024 + DANUBE_BCU_BASE_ADDR)
-
-/***BCU Error Data Capture Register (0028H)***/
-#define DANUBE_BCU_EDAT (0x0028 + DANUBE_BCU_BASE_ADDR)
-
-#define DANUBE_BCU_IRNEN (0x00F4 + DANUBE_BCU_BASE_ADDR)
-#define DANUBE_BCU_IRNICR (0x00F8 + DANUBE_BCU_BASE_ADDR)
-#define DANUBE_BCU_IRNCR (0x00FC + DANUBE_BCU_BASE_ADDR)
-
-
-/***********************************************************************/
-/* Module : MBC register address and bits */
-/***********************************************************************/
-
-#define DANUBE_MBC (0xBF103000)
-/***********************************************************************/
-
-
-/***Mailbox CPU Configuration Register***/
-#define DANUBE_MBC_MBC_CFG ((volatile u32*)(DANUBE_MBC+ 0x0080))
-#define DANUBE_MBC_MBC_CFG_SWAP (value) (((( 1 << 2) - 1) & (value)) << 6)
-#define DANUBE_MBC_MBC_CFG_RES (1 << 5)
-#define DANUBE_MBC_MBC_CFG_FWID (value) (((( 1 << 4) - 1) & (value)) << 1)
-#define DANUBE_MBC_MBC_CFG_SIZE (1 << 0)
-
-/***Mailbox CPU Interrupt Status Register***/
-#define DANUBE_MBC_MBC_ISR ((volatile u32*)(DANUBE_MBC+ 0x0084))
-#define DANUBE_MBC_MBC_ISR_B3DA (1 << 31)
-#define DANUBE_MBC_MBC_ISR_B2DA (1 << 30)
-#define DANUBE_MBC_MBC_ISR_B1E (1 << 29)
-#define DANUBE_MBC_MBC_ISR_B0E (1 << 28)
-#define DANUBE_MBC_MBC_ISR_WDT (1 << 27)
-#define DANUBE_MBC_MBC_ISR_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0)
-
-/***Mailbox CPU Mask Register***/
-#define DANUBE_MBC_MBC_MSK ((volatile u32*)(DANUBE_MBC+ 0x0088))
-#define DANUBE_MBC_MBC_MSK_B3DA (1 << 31)
-#define DANUBE_MBC_MBC_MSK_B2DA (1 << 30)
-#define DANUBE_MBC_MBC_MSK_B1E (1 << 29)
-#define DANUBE_MBC_MBC_MSK_B0E (1 << 28)
-#define DANUBE_MBC_MBC_MSK_WDT (1 << 27)
-#define DANUBE_MBC_MBC_MSK_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0)
-
-/***Mailbox CPU Mask 01 Register***/
-#define DANUBE_MBC_MBC_MSK01 ((volatile u32*)(DANUBE_MBC+ 0x008C))
-#define DANUBE_MBC_MBC_MSK01_B3DA (1 << 31)
-#define DANUBE_MBC_MBC_MSK01_B2DA (1 << 30)
-#define DANUBE_MBC_MBC_MSK01_B1E (1 << 29)
-#define DANUBE_MBC_MBC_MSK01_B0E (1 << 28)
-#define DANUBE_MBC_MBC_MSK01_WDT (1 << 27)
-#define DANUBE_MBC_MBC_MSK01_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0)
-
-/***Mailbox CPU Mask 10 Register***/
-#define DANUBE_MBC_MBC_MSK10 ((volatile u32*)(DANUBE_MBC+ 0x0090))
-#define DANUBE_MBC_MBC_MSK10_B3DA (1 << 31)
-#define DANUBE_MBC_MBC_MSK10_B2DA (1 << 30)
-#define DANUBE_MBC_MBC_MSK10_B1E (1 << 29)
-#define DANUBE_MBC_MBC_MSK10_B0E (1 << 28)
-#define DANUBE_MBC_MBC_MSK10_WDT (1 << 27)
-#define DANUBE_MBC_MBC_MSK10_DS260 (value) (((( 1 << 27) - 1) & (value)) << 0)
-
-/***Mailbox CPU Short Command Register***/
-#define DANUBE_MBC_MBC_CMD ((volatile u32*)(DANUBE_MBC+ 0x0094))
-#define DANUBE_MBC_MBC_CMD_CS270 (value) (((( 1 << 28) - 1) & (value)) << 0)
-
-/***Mailbox CPU Input Data of Buffer 0***/
-#define DANUBE_MBC_MBC_ID0 ((volatile u32*)(DANUBE_MBC+ 0x0000))
-#define DANUBE_MBC_MBC_ID0_INDATA
-
-/***Mailbox CPU Input Data of Buffer 1***/
-#define DANUBE_MBC_MBC_ID1 ((volatile u32*)(DANUBE_MBC+ 0x0020))
-#define DANUBE_MBC_MBC_ID1_INDATA
-
-/***Mailbox CPU Output Data of Buffer 2***/
-#define DANUBE_MBC_MBC_OD2 ((volatile u32*)(DANUBE_MBC+ 0x0040))
-#define DANUBE_MBC_MBC_OD2_OUTDATA
-
-/***Mailbox CPU Output Data of Buffer 3***/
-#define DANUBE_MBC_MBC_OD3 ((volatile u32*)(DANUBE_MBC+ 0x0060))
-#define DANUBE_MBC_MBC_OD3_OUTDATA
-
-/***Mailbox CPU Control Register of Buffer 0***/
-#define DANUBE_MBC_MBC_CR0 ((volatile u32*)(DANUBE_MBC+ 0x0004))
-#define DANUBE_MBC_MBC_CR0_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***Mailbox CPU Control Register of Buffer 1***/
-#define DANUBE_MBC_MBC_CR1 ((volatile u32*)(DANUBE_MBC+ 0x0024))
-#define DANUBE_MBC_MBC_CR1_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***Mailbox CPU Control Register of Buffer 2***/
-#define DANUBE_MBC_MBC_CR2 ((volatile u32*)(DANUBE_MBC+ 0x0044))
-#define DANUBE_MBC_MBC_CR2_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***Mailbox CPU Control Register of Buffer 3***/
-#define DANUBE_MBC_MBC_CR3 ((volatile u32*)(DANUBE_MBC+ 0x0064))
-#define DANUBE_MBC_MBC_CR3_RDYABTFLS (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***Mailbox CPU Free Space of Buffer 0***/
-#define DANUBE_MBC_MBC_FS0 ((volatile u32*)(DANUBE_MBC+ 0x0008))
-#define DANUBE_MBC_MBC_FS0_FS
-
-/***Mailbox CPU Free Space of Buffer 1***/
-#define DANUBE_MBC_MBC_FS1 ((volatile u32*)(DANUBE_MBC+ 0x0028))
-#define DANUBE_MBC_MBC_FS1_FS
-
-/***Mailbox CPU Free Space of Buffer 2***/
-#define DANUBE_MBC_MBC_FS2 ((volatile u32*)(DANUBE_MBC+ 0x0048))
-#define DANUBE_MBC_MBC_FS2_FS
-
-/***Mailbox CPU Free Space of Buffer 3***/
-#define DANUBE_MBC_MBC_FS3 ((volatile u32*)(DANUBE_MBC+ 0x0068))
-#define DANUBE_MBC_MBC_FS3_FS
-
-/***Mailbox CPU Data Available in Buffer 0***/
-#define DANUBE_MBC_MBC_DA0 ((volatile u32*)(DANUBE_MBC+ 0x000C))
-#define DANUBE_MBC_MBC_DA0_DA
-
-/***Mailbox CPU Data Available in Buffer 1***/
-#define DANUBE_MBC_MBC_DA1 ((volatile u32*)(DANUBE_MBC+ 0x002C))
-#define DANUBE_MBC_MBC_DA1_DA
-
-/***Mailbox CPU Data Available in Buffer 2***/
-#define DANUBE_MBC_MBC_DA2 ((volatile u32*)(DANUBE_MBC+ 0x004C))
-#define DANUBE_MBC_MBC_DA2_DA
-
-/***Mailbox CPU Data Available in Buffer 3***/
-#define DANUBE_MBC_MBC_DA3 ((volatile u32*)(DANUBE_MBC+ 0x006C))
-#define DANUBE_MBC_MBC_DA3_DA
-
-/***Mailbox CPU Input Absolute Pointer of Buffer 0***/
-#define DANUBE_MBC_MBC_IABS0 ((volatile u32*)(DANUBE_MBC+ 0x0010))
-#define DANUBE_MBC_MBC_IABS0_IABS
-
-/***Mailbox CPU Input Absolute Pointer of Buffer 1***/
-#define DANUBE_MBC_MBC_IABS1 ((volatile u32*)(DANUBE_MBC+ 0x0030))
-#define DANUBE_MBC_MBC_IABS1_IABS
-
-/***Mailbox CPU Input Absolute Pointer of Buffer 2***/
-#define DANUBE_MBC_MBC_IABS2 ((volatile u32*)(DANUBE_MBC+ 0x0050))
-#define DANUBE_MBC_MBC_IABS2_IABS
-
-/***Mailbox CPU Input Absolute Pointer of Buffer 3***/
-#define DANUBE_MBC_MBC_IABS3 ((volatile u32*)(DANUBE_MBC+ 0x0070))
-#define DANUBE_MBC_MBC_IABS3_IABS
-
-/***Mailbox CPU Input Temporary Pointer of Buffer 0***/
-#define DANUBE_MBC_MBC_ITMP0 ((volatile u32*)(DANUBE_MBC+ 0x0014))
-#define DANUBE_MBC_MBC_ITMP0_ITMP
-
-/***Mailbox CPU Input Temporary Pointer of Buffer 1***/
-#define DANUBE_MBC_MBC_ITMP1 ((volatile u32*)(DANUBE_MBC+ 0x0034))
-#define DANUBE_MBC_MBC_ITMP1_ITMP
-
-/***Mailbox CPU Input Temporary Pointer of Buffer 2***/
-#define DANUBE_MBC_MBC_ITMP2 ((volatile u32*)(DANUBE_MBC+ 0x0054))
-#define DANUBE_MBC_MBC_ITMP2_ITMP
-
-/***Mailbox CPU Input Temporary Pointer of Buffer 3***/
-#define DANUBE_MBC_MBC_ITMP3 ((volatile u32*)(DANUBE_MBC+ 0x0074))
-#define DANUBE_MBC_MBC_ITMP3_ITMP
-
-/***Mailbox CPU Output Absolute Pointer of Buffer 0***/
-#define DANUBE_MBC_MBC_OABS0 ((volatile u32*)(DANUBE_MBC+ 0x0018))
-#define DANUBE_MBC_MBC_OABS0_OABS
-
-/***Mailbox CPU Output Absolute Pointer of Buffer 1***/
-#define DANUBE_MBC_MBC_OABS1 ((volatile u32*)(DANUBE_MBC+ 0x0038))
-#define DANUBE_MBC_MBC_OABS1_OABS
-
-/***Mailbox CPU Output Absolute Pointer of Buffer 2***/
-#define DANUBE_MBC_MBC_OABS2 ((volatile u32*)(DANUBE_MBC+ 0x0058))
-#define DANUBE_MBC_MBC_OABS2_OABS
-
-/***Mailbox CPU Output Absolute Pointer of Buffer 3***/
-#define DANUBE_MBC_MBC_OABS3 ((volatile u32*)(DANUBE_MBC+ 0x0078))
-#define DANUBE_MBC_MBC_OABS3_OABS
-
-/***Mailbox CPU Output Temporary Pointer of Buffer 0***/
-#define DANUBE_MBC_MBC_OTMP0 ((volatile u32*)(DANUBE_MBC+ 0x001C))
-#define DANUBE_MBC_MBC_OTMP0_OTMP
-
-/***Mailbox CPU Output Temporary Pointer of Buffer 1***/
-#define DANUBE_MBC_MBC_OTMP1 ((volatile u32*)(DANUBE_MBC+ 0x003C))
-#define DANUBE_MBC_MBC_OTMP1_OTMP
-
-/***Mailbox CPU Output Temporary Pointer of Buffer 2***/
-#define DANUBE_MBC_MBC_OTMP2 ((volatile u32*)(DANUBE_MBC+ 0x005C))
-#define DANUBE_MBC_MBC_OTMP2_OTMP
-
-/***Mailbox CPU Output Temporary Pointer of Buffer 3***/
-#define DANUBE_MBC_MBC_OTMP3 ((volatile u32*)(DANUBE_MBC+ 0x007C))
-#define DANUBE_MBC_MBC_OTMP3_OTMP
-
-/***DSP Control Register***/
-#define DANUBE_MBC_DCTRL ((volatile u32*)(DANUBE_MBC+ 0x00A0))
-#define DANUBE_MBC_DCTRL_BA (1 << 0)
-#define DANUBE_MBC_DCTRL_BMOD (value) (((( 1 << 3) - 1) & (value)) << 1)
-#define DANUBE_MBC_DCTRL_IDL (1 << 4)
-#define DANUBE_MBC_DCTRL_RES (1 << 15)
-
-/***DSP Status Register***/
-#define DANUBE_MBC_DSTA ((volatile u32*)(DANUBE_MBC+ 0x00A4))
-#define DANUBE_MBC_DSTA_IDLE (1 << 0)
-#define DANUBE_MBC_DSTA_PD (1 << 1)
-
-/***DSP Test 1 Register***/
-#define DANUBE_MBC_DTST1 ((volatile u32*)(DANUBE_MBC+ 0x00A8))
-#define DANUBE_MBC_DTST1_ABORT (1 << 0)
-#define DANUBE_MBC_DTST1_HWF32 (1 << 1)
-#define DANUBE_MBC_DTST1_HWF4M (1 << 2)
-#define DANUBE_MBC_DTST1_HWFOP (1 << 3)
-
-
-/***********************************************************************/
-/* Module : SSC1 register address and bits */
-/***********************************************************************/
-#define DANUBE_SSC1 (KSEG1+0x1e100800)
-/***********************************************************************/
-/***SSC Clock Control Register***/
-#define DANUBE_SSC_CLC (0x0000)
-#define DANUBE_SSC_CLC_RMC(value) (((( 1 << 8) - 1) & (value)) << 8)
-#define DANUBE_SSC_CLC_DISS (1 << 1)
-#define DANUBE_SSC_CLC_DISR (1 << 0)
-/***SSC Port Input Selection Register***/
-#define DANUBE_SSC_PISEL (0x0004)
-/***SSC Identification Register***/
-#define DANUBE_SSC_ID (0x0008)
-/***Control Register (Programming Mode)***/
-#define DANUBE_SSC_CON (0x0010)
-#define DANUBE_SSC_CON_RUEN (1 << 12)
-#define DANUBE_SSC_CON_TUEN (1 << 11)
-#define DANUBE_SSC_CON_AEN (1 << 10)
-#define DANUBE_SSC_CON_REN (1 << 9)
-#define DANUBE_SSC_CON_TEN (1 << 8)
-#define DANUBE_SSC_CON_LB (1 << 7)
-#define DANUBE_SSC_CON_PO (1 << 6)
-#define DANUBE_SSC_CON_PH (1 << 5)
-#define DANUBE_SSC_CON_HB (1 << 4)
-#define DANUBE_SSC_CON_BM(value) (((( 1 << 5) - 1) & (value)) << 16)
-#define DANUBE_SSC_CON_RX_OFF (1 << 1)
-#define DANUBE_SSC_CON_TX_OFF (1 << 0)
-/***SCC Status Register***/
-#define DANUBE_SSC_STATE (0x0014)
-#define DANUBE_SSC_STATE_EN (1 << 0)
-#define DANUBE_SSC_STATE_MS (1 << 1)
-#define DANUBE_SSC_STATE_BSY (1 << 13)
-#define DANUBE_SSC_STATE_RUE (1 << 12)
-#define DANUBE_SSC_STATE_TUE (1 << 11)
-#define DANUBE_SSC_STATE_AE (1 << 10)
-#define DANUBE_SSC_STATE_RE (1 << 9)
-#define DANUBE_SSC_STATE_TE (1 << 8)
-#define DANUBE_SSC_STATE_BC(value) (((( 1 << 5) - 1) & (value)) << 16)
-/***SSC Write Hardware Modified Control Register***/
-#define DANUBE_SSC_WHBSTATE ( 0x0018)
-#define DANUBE_SSC_WHBSTATE_SETBE (1 << 15)
-#define DANUBE_SSC_WHBSTATE_SETPE (1 << 14)
-#define DANUBE_SSC_WHBSTATE_SETRE (1 << 13)
-#define DANUBE_SSC_WHBSTATE_SETTE (1 << 12)
-#define DANUBE_SSC_WHBSTATE_CLRBE (1 << 11)
-#define DANUBE_SSC_WHBSTATE_CLRPE (1 << 10)
-#define DANUBE_SSC_WHBSTATE_CLRRE (1 << 9)
-#define DANUBE_SSC_WHBSTATE_CLRTE (1 << 8)
-/***SSC Transmitter Buffer Register***/
-#define DANUBE_SSC_TB (0x0020)
-#define DANUBE_SSC_TB_TB_VALUE(value) (((( 1 << 16) - 1) & (value)) << 0)
-/***SSC Receiver Buffer Register***/
-#define DANUBE_SSC_RB (0x0024)
-#define DANUBE_SSC_RB_RB_VALUE(value) (((( 1 << 16) - 1) & (value)) << 0)
-/***SSC Receive FIFO Control Register***/
-#define DANUBE_SSC_RXFCON (0x0030)
-#define DANUBE_SSC_RXFCON_RXFITL(value) (((( 1 << 6) - 1) & (value)) << 8)
-#define DANUBE_SSC_RXFCON_RXTMEN (1 << 2)
-#define DANUBE_SSC_RXFCON_RXFLU (1 << 1)
-#define DANUBE_SSC_RXFCON_RXFEN (1 << 0)
-/***SSC Transmit FIFO Control Register***/
-#define DANUBE_SSC_TXFCON ( 0x0034)
-#define DANUBE_SSC_TXFCON_RXFITL(value) (((( 1 << 6) - 1) & (value)) << 8)
-#define DANUBE_SSC_TXFCON_TXTMEN (1 << 2)
-#define DANUBE_SSC_TXFCON_TXFLU (1 << 1)
-#define DANUBE_SSC_TXFCON_TXFEN (1 << 0)
-/***SSC FIFO Status Register***/
-#define DANUBE_SSC_FSTAT (0x0038)
-#define DANUBE_SSC_FSTAT_TXFFL(value) (((( 1 << 6) - 1) & (value)) << 8)
-#define DANUBE_SSC_FSTAT_RXFFL(value) (((( 1 << 6) - 1) & (value)) << 0)
-/***SSC Baudrate Timer Reload Register***/
-#define DANUBE_SSC_BR (0x0040)
-#define DANUBE_SSC_BR_BR_VALUE(value) (((( 1 << 16) - 1) & (value)) << 0)
-#define DANUBE_SSC_BRSTAT (0x0044)
-#define DANUBE_SSC_SFCON (0x0060)
-#define DANUBE_SSC_SFSTAT (0x0064)
-#define DANUBE_SSC_GPOCON (0x0070)
-#define DANUBE_SSC_GPOSTAT (0x0074)
-#define DANUBE_SSC_WHBGPOSTAT (0x0078)
-#define DANUBE_SSC_RXREQ (0x0080)
-#define DANUBE_SSC_RXCNT (0x0084)
-/*DMA Registers in Bus Clock Domain*/
-#define DANUBE_SSC_DMA_CON (0x00EC)
-/*interrupt Node Registers in Bus Clock Domain*/
-#define DANUBE_SSC_IRNEN (0x00F4)
-#define DANUBE_SSC_IRNCR (0x00F8)
-#define DANUBE_SSC_IRNICR (0x00FC)
-#define DANUBE_SSC_IRN_FIR 0x8
-#define DANUBE_SSC_IRN_EIR 0x4
-#define DANUBE_SSC_IRN_RIR 0x2
-#define DANUBE_SSC_IRN_TIR 0x1
-
-
-#define DANUBE_SSC1_CLC ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_CLC))
-#define DANUBE_SSC1_ID ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_ID))
-#define DANUBE_SSC1_CON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_CON))
-#define DANUBE_SSC1_STATE ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_STATE))
-#define DANUBE_SSC1_WHBSTATE ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_WHBSTATE))
-#define DANUBE_SSC1_TB ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_TB))
-#define DANUBE_SSC1_RB ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_RB))
-#define DANUBE_SSC1_FSTAT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_FSTAT))
-#define DANUBE_SSC1_PISEL ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_PISEL))
-#define DANUBE_SSC1_RXFCON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_RXFCON))
-#define DANUBE_SSC1_TXFCON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_TXFCON))
-#define DANUBE_SSC1_BR ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_BR))
-#define DANUBE_SSC1_BRSTAT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_BRSTAT))
-#define DANUBE_SSC1_SFCON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_SFCON))
-#define DANUBE_SSC1_SFSTAT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_SFSTAT))
-#define DANUBE_SSC1_GPOCON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_GPOCON))
-#define DANUBE_SSC1_GPOSTAT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_GPOSTAT))
-#define DANUBE_SSC1_WHBGPOSTAT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_WHBGPOSTAT))
-#define DANUBE_SSC1_RXREQ ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_RXREQ))
-#define DANUBE_SSC1_RXCNT ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_RXCNT))
-#define DANUBE_SSC1_DMA_CON ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_DMA_CON))
-#define DANUBE_SSC1_IRNEN ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_IRNEN))
-#define DANUBE_SSC1_IRNICR ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_IRNICR))
-#define DANUBE_SSC1_IRNCR ((volatile u32*)(DANUBE_SSC1+DANUBE_SSC_IRNCR))
-
-/***********************************************************************/
-/* Module : GPIO register address and bits */
-/***********************************************************************/
-#define DANUBE_GPIO (0xBE100B00)
-/***Port 0 Data Output Register (0010H)***/
-#define DANUBE_GPIO_P0_OUT ((volatile u32 *)(DANUBE_GPIO+ 0x0010))
-/***Port 1 Data Output Register (0040H)***/
-#define DANUBE_GPIO_P1_OUT ((volatile u32 *)(DANUBE_GPIO+ 0x0040))
-/***Port 0 Data Input Register (0014H)***/
-#define DANUBE_GPIO_P0_IN ((volatile u32 *)(DANUBE_GPIO+ 0x0014))
-/***Port 1 Data Input Register (0044H)***/
-#define DANUBE_GPIO_P1_IN ((volatile u32 *)(DANUBE_GPIO+ 0x0044))
-/***Port 0 Direction Register (0018H)***/
-#define DANUBE_GPIO_P0_DIR ((volatile u32 *)(DANUBE_GPIO+ 0x0018))
-/***Port 1 Direction Register (0048H)***/
-#define DANUBE_GPIO_P1_DIR ((volatile u32 *)(DANUBE_GPIO+ 0x0048))
-/***Port 0 Alternate Function Select Register 0 (001C H) ***/
-#define DANUBE_GPIO_P0_ALTSEL0 ((volatile u32 *)(DANUBE_GPIO+ 0x001C))
-/***Port 1 Alternate Function Select Register 0 (004C H) ***/
-#define DANUBE_GPIO_P1_ALTSEL0 ((volatile u32 *)(DANUBE_GPIO+ 0x004C))
-/***Port 0 Alternate Function Select Register 1 (0020 H) ***/
-#define DANUBE_GPIO_P0_ALTSEL1 ((volatile u32 *)(DANUBE_GPIO+ 0x0020))
-/***Port 1 Alternate Function Select Register 0 (0050 H) ***/
-#define DANUBE_GPIO_P1_ALTSEL1 ((volatile u32 *)(DANUBE_GPIO+ 0x0050))
-/***Port 0 Open Drain Control Register (0024H)***/
-#define DANUBE_GPIO_P0_OD ((volatile u32 *)(DANUBE_GPIO+ 0x0024))
-/***Port 1 Open Drain Control Register (0054H)***/
-#define DANUBE_GPIO_P1_OD ((volatile u32 *)(DANUBE_GPIO+ 0x0054))
-/***Port 0 Input Schmitt-Trigger Off Register (0028 H) ***/
-#define DANUBE_GPIO_P0_STOFF ((volatile u32 *)(DANUBE_GPIO+ 0x0028))
-/***Port 1 Input Schmitt-Trigger Off Register (0058 H) ***/
-#define DANUBE_GPIO_P1_STOFF ((volatile u32 *)(DANUBE_GPIO+ 0x0058))
-/***Port 0 Pull Up/Pull Down Select Register (002C H)***/
-#define DANUBE_GPIO_P0_PUDSEL ((volatile u32 *)(DANUBE_GPIO+ 0x002C))
-/***Port 1 Pull Up/Pull Down Select Register (005C H)***/
-#define DANUBE_GPIO_P1_PUDSEL ((volatile u32 *)(DANUBE_GPIO+ 0x005C))
-/***Port 0 Pull Up Device Enable Register (0030 H)***/
-#define DANUBE_GPIO_P0_PUDEN ((volatile u32 *)(DANUBE_GPIO+ 0x0030))
-/***Port 1 Pull Up Device Enable Register (0060 H)***/
-#define DANUBE_GPIO_P1_PUDEN ((volatile u32 *)(DANUBE_GPIO+ 0x0060))
-/***********************************************************************/
-/* Module : CGU register address and bits */
-/***********************************************************************/
-
-#define DANUBE_CGU (0xBF103000)
-/***********************************************************************/
-
-/***CGU Clock PLL0 ***/
-#define DANUBE_CGU_PLL0_CFG ((volatile u32*)(DANUBE_CGU+ 0x0004))
-/***CGU Clock PLL1 ***/
-#define DANUBE_CGU_PLL1_CFG ((volatile u32*)(DANUBE_CGU+ 0x0008))
-/***CGU Clock SYS Mux Register***/
-#define DANUBE_CGU_SYS ((volatile u32*)(DANUBE_CGU+ 0x0010))
-/***CGU Interface Clock Control Register***/
-#define DANUBE_CGU_IFCCR ((volatile u32*)(DANUBE_CGU+ 0x0018))
-/***CGU PCI Clock Control Register**/
-#define DANUBE_CGU_PCICR ((volatile u32*)(DANUBE_CGU+ 0x0034))
-
-
-/***********************************************************************/
-/* Module : PCI register address and bits */
-/***********************************************************************/
-#define PCI_CR_PR_OFFSET 0xBE105400
-#define PCI_CR_CLK_CTRL_REG (PCI_CR_PR_OFFSET + 0x0000)
-
-#define PCI_CR_PCI_ID_REG (PCI_CR_PR_OFFSET + 0x0004)
-#define PCI_CR_SFT_RST_REG (PCI_CR_PR_OFFSET + 0x0010)
-#define PCI_CR_PCI_FPI_ERR_ADDR_REG (PCI_CR_PR_OFFSET + 0x0014)
-#define PCI_CR_FCI_PCI_ERR_ADDR_REG (PCI_CR_PR_OFFSET + 0x0018)
-#define PCI_CR_FPI_ERR_TAG_REG (PCI_CR_PR_OFFSET + 0x001C)
-#define PCI_CR_PCI_IRR_REG (PCI_CR_PR_OFFSET + 0x0020)
-#define PCI_CR_PCI_IRA_REG (PCI_CR_PR_OFFSET + 0x0024)
-#define PCI_CR_PCI_IRM_REG (PCI_CR_PR_OFFSET + 0x0028)
-#define PCI_CR_PCI_EOI_REG (PCI_CR_PR_OFFSET + 0x002C)
-#define PCI_CR_PCI_MOD_REG (PCI_CR_PR_OFFSET + 0x0030)
-#define PCI_CR_DV_ID_REG (PCI_CR_PR_OFFSET + 0x0034)
-#define PCI_CR_SUBSYS_ID_REG (PCI_CR_PR_OFFSET + 0x0038)
-#define PCI_CR_PCI_PM_REG (PCI_CR_PR_OFFSET + 0x003C)
-#define PCI_CR_CLASS_CODE1_REG (PCI_CR_PR_OFFSET + 0x0040)
-#define PCI_CR_BAR11MASK_REG (PCI_CR_PR_OFFSET + 0x0044)
-#define PCI_CR_BAR12MASK_REG (PCI_CR_PR_OFFSET + 0x0048)
-#define PCI_CR_BAR13MASK_REG (PCI_CR_PR_OFFSET + 0x004C)
-#define PCI_CR_BAR14MASK_REG (PCI_CR_PR_OFFSET + 0x0050)
-#define PCI_CR_BAR15MASK_REG (PCI_CR_PR_OFFSET + 0x0054)
-#define PCI_CR_BAR16MASK_REG (PCI_CR_PR_OFFSET + 0x0058)
-#define PCI_CR_CIS_PT1_REG (PCI_CR_PR_OFFSET + 0x005C)
-#define PCI_CR_SUBSYS_ID1_REG (PCI_CR_PR_OFFSET + 0x0060)
-#define PCI_CR_PCI_ADDR_MAP11_REG (PCI_CR_PR_OFFSET + 0x0064)
-#define PCI_CR_PCI_ADDR_MAP12_REG (PCI_CR_PR_OFFSET + 0x0068)
-#define PCI_CR_PCI_ADDR_MAP13_REG (PCI_CR_PR_OFFSET + 0x006C)
-#define PCI_CR_PCI_ADDR_MAP14_REG (PCI_CR_PR_OFFSET + 0x0070)
-#define PCI_CR_PCI_ADDR_MAP15_REG (PCI_CR_PR_OFFSET + 0x0074)
-#define PCI_CR_PCI_ADDR_MAP16_REG (PCI_CR_PR_OFFSET + 0x0078)
-#define PCI_CR_FPI_SEG_EN_REG (PCI_CR_PR_OFFSET + 0x007C)
-#define PCI_CR_PC_ARB_REG (PCI_CR_PR_OFFSET + 0x0080)
-#define PCI_CR_BAR21MASK_REG (PCI_CR_PR_OFFSET + 0x0084)
-#define PCI_CR_BAR22MASK_REG (PCI_CR_PR_OFFSET + 0x0088)
-#define PCI_CR_BAR23MASK_REG (PCI_CR_PR_OFFSET + 0x008C)
-#define PCI_CR_BAR24MASK_REG (PCI_CR_PR_OFFSET + 0x0090)
-#define PCI_CR_BAR25MASK_REG (PCI_CR_PR_OFFSET + 0x0094)
-#define PCI_CR_BAR26MASK_REG (PCI_CR_PR_OFFSET + 0x0098)
-#define PCI_CR_CIS_PT2_REG (PCI_CR_PR_OFFSET + 0x009C)
-#define PCI_CR_SUBSYS_ID2_REG (PCI_CR_PR_OFFSET + 0x00A0)
-#define PCI_CR_PCI_ADDR_MAP21_REG (PCI_CR_PR_OFFSET + 0x00A4)
-#define PCI_CR_PCI_ADDR_MAP22_REG (PCI_CR_PR_OFFSET + 0x00A8)
-#define PCI_CR_PCI_ADDR_MAP23_REG (PCI_CR_PR_OFFSET + 0x00AC)
-
-
-/***********************************************************************/
-/* Module : MCD register address and bits */
-/***********************************************************************/
-#define DANUBE_MCD (KSEG1+0x1F106000)
-
-/***Manufacturer Identification Register***/
-#define DANUBE_MCD_MANID ((volatile u32*)(DANUBE_MCD+ 0x0024))
-#define DANUBE_MCD_MANID_MANUF(value) (((( 1 << 11) - 1) & (value)) << 5)
-
-/***Chip Identification Register***/
-#define DANUBE_MCD_CHIPID ((volatile u32*)(DANUBE_MCD+ 0x0028))
-#define DANUBE_MCD_CHIPID_VERSION_GET(value) (((value) >> 28) & ((1 << 4) - 1))
-#define DANUBE_MCD_CHIPID_VERSION_SET(value) (((( 1 << 4) - 1) & (value)) << 28)
-#define DANUBE_MCD_CHIPID_PART_NUMBER_GET(value) (((value) >> 12) & ((1 << 16) - 1))
-#define DANUBE_MCD_CHIPID_PART_NUMBER_SET(value) (((( 1 << 16) - 1) & (value)) << 12)
-#define DANUBE_MCD_CHIPID_MANID_GET(value) (((value) >> 1) & ((1 << 11) - 1))
-#define DANUBE_MCD_CHIPID_MANID_SET(value) (((( 1 << 11) - 1) & (value)) << 1)
-
-#define DANUBE_CHIPID_STANDARD 0x00EB
-#define DANUBE_CHIPID_YANGTSE 0x00ED
-
-/***Redesign Tracing Identification Register***/
-#define DANUBE_MCD_RTID ((volatile u32*)(DANUBE_MCD+ 0x002C))
-#define DANUBE_MCD_RTID_LC (1 << 15)
-#define DANUBE_MCD_RTID_RIX(value) (((( 1 << 3) - 1) & (value)) << 0)
-
-
-/***********************************************************************/
-/* Module : EBU register address and bits */
-/***********************************************************************/
-
-#define DANUBE_EBU (0xBE105300)
-#define EBU_ADDR_SEL_0 (volatile u32*)(DANUBE_EBU + 0x20)
-#define EBU_ADDR_SEL_1 (volatile u32*)(DANUBE_EBU + 0x24)
-#define EBU_CON_0 (volatile u32*)(DANUBE_EBU + 0x60)
-#define EBU_CON_1 (volatile u32*)(DANUBE_EBU + 0x64)
-#define EBU_NAND_CON (volatile u32*)(DANUBE_EBU + 0xB0)
-#define EBU_NAND_WAIT (volatile u32*)(DANUBE_EBU + 0xB4)
-#define EBU_NAND_ECC0 (volatile u32*)(DANUBE_EBU + 0xB8)
-#define EBU_NAND_ECC_AC (volatile u32*)(DANUBE_EBU + 0xBC)
-
-/***********************************************************************/
-
-
-/***EBU Clock Control Register***/
-#define DANUBE_EBU_CLC ((volatile u32*)(DANUBE_EBU+ 0x0000))
-#define DANUBE_EBU_CLC_DISS (1 << 1)
-#define DANUBE_EBU_CLC_DISR (1 << 0)
-
-/***EBU Global Control Register***/
-#define DANUBE_EBU_CON ((volatile u32*)(DANUBE_EBU+ 0x0010))
-#define DANUBE_EBU_CON_DTACS (value) (((( 1 << 3) - 1) & (value)) << 20)
-#define DANUBE_EBU_CON_DTARW (value) (((( 1 << 3) - 1) & (value)) << 16)
-#define DANUBE_EBU_CON_TOUTC (value) (((( 1 << 8) - 1) & (value)) << 8)
-#define DANUBE_EBU_CON_ARBMODE (value) (((( 1 << 2) - 1) & (value)) << 6)
-#define DANUBE_EBU_CON_ARBSYNC (1 << 5)
-#define DANUBE_EBU_CON_1 (1 << 3)
-
-/***EBU Address Select Register 0***/
-#define DANUBE_EBU_ADDSEL0 ((volatile u32*)(DANUBE_EBU+ 0x0020))
-#define DANUBE_EBU_ADDSEL0_BASE (value) (((( 1 << 20) - 1) & (value)) << 12)
-#define DANUBE_EBU_ADDSEL0_MASK (value) (((( 1 << 4) - 1) & (value)) << 4)
-#define DANUBE_EBU_ADDSEL0_MIRRORE (1 << 1)
-#define DANUBE_EBU_ADDSEL0_REGEN (1 << 0)
-
-/***EBU Address Select Register 1***/
-#define DANUBE_EBU_ADDSEL1 ((volatile u32*)(DANUBE_EBU+ 0x0024))
-#define DANUBE_EBU_ADDSEL1_BASE (value) (((( 1 << 20) - 1) & (value)) << 12)
-#define DANUBE_EBU_ADDSEL1_MASK (value) (((( 1 << 4) - 1) & (value)) << 4)
-#define DANUBE_EBU_ADDSEL1_MIRRORE (1 << 1)
-#define DANUBE_EBU_ADDSEL1_REGEN (1 << 0)
-
-/***EBU Address Select Register 2***/
-#define DANUBE_EBU_ADDSEL2 ((volatile u32*)(DANUBE_EBU+ 0x0028))
-#define DANUBE_EBU_ADDSEL2_BASE (value) (((( 1 << 20) - 1) & (value)) << 12)
-#define DANUBE_EBU_ADDSEL2_MASK (value) (((( 1 << 4) - 1) & (value)) << 4)
-#define DANUBE_EBU_ADDSEL2_MIRRORE (1 << 1)
-#define DANUBE_EBU_ADDSEL2_REGEN (1 << 0)
-
-/***EBU Address Select Register 3***/
-#define DANUBE_EBU_ADDSEL3 ((volatile u32*)(DANUBE_EBU+ 0x0028))
-#define DANUBE_EBU_ADDSEL3_BASE (value) (((( 1 << 20) - 1) & (value)) << 12)
-#define DANUBE_EBU_ADDSEL3_MASK (value) (((( 1 << 4) - 1) & (value)) << 4)
-#define DANUBE_EBU_ADDSEL3_MIRRORE (1 << 1)
-#define DANUBE_EBU_ADDSEL3_REGEN (1 << 0)
-
-/***EBU Bus Configuration Register 0***/
-#define DANUBE_EBU_BUSCON0 ((volatile u32*)(DANUBE_EBU+ 0x0060))
-#define DANUBE_EBU_BUSCON0_WRDIS (1 << 31)
-#define DANUBE_EBU_BUSCON0_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29)
-#define DANUBE_EBU_BUSCON0_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27)
-#define DANUBE_EBU_BUSCON0_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24)
-#define DANUBE_EBU_BUSCON0_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22)
-#define DANUBE_EBU_BUSCON0_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20)
-#define DANUBE_EBU_BUSCON0_WAITINV (1 << 19)
-#define DANUBE_EBU_BUSCON0_SETUP (1 << 18)
-#define DANUBE_EBU_BUSCON0_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16)
-#define DANUBE_EBU_BUSCON0_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9)
-#define DANUBE_EBU_BUSCON0_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6)
-#define DANUBE_EBU_BUSCON0_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4)
-#define DANUBE_EBU_BUSCON0_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2)
-#define DANUBE_EBU_BUSCON0_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***EBU Bus Configuration Register 1***/
-#define DANUBE_EBU_BUSCON1 ((volatile u32*)(DANUBE_EBU+ 0x0064))
-#define DANUBE_EBU_BUSCON1_WRDIS (1 << 31)
-#define DANUBE_EBU_BUSCON1_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29)
-#define DANUBE_EBU_BUSCON1_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27)
-#define DANUBE_EBU_BUSCON1_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24)
-#define DANUBE_EBU_BUSCON1_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22)
-#define DANUBE_EBU_BUSCON1_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20)
-#define DANUBE_EBU_BUSCON1_WAITINV (1 << 19)
-#define DANUBE_EBU_BUSCON1_SETUP (1 << 18)
-#define DANUBE_EBU_BUSCON1_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16)
-#define DANUBE_EBU_BUSCON1_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9)
-#define DANUBE_EBU_BUSCON1_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6)
-#define DANUBE_EBU_BUSCON1_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4)
-#define DANUBE_EBU_BUSCON1_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2)
-#define DANUBE_EBU_BUSCON1_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***EBU Bus Configuration Register 2***/
-#define DANUBE_EBU_BUSCON2 ((volatile u32*)(DANUBE_EBU+ 0x0068))
-#define DANUBE_EBU_BUSCON2_WRDIS (1 << 31)
-#define DANUBE_EBU_BUSCON2_ALEC (value) (((( 1 << 2) - 1) & (value)) << 29)
-#define DANUBE_EBU_BUSCON2_BCGEN (value) (((( 1 << 2) - 1) & (value)) << 27)
-#define DANUBE_EBU_BUSCON2_AGEN (value) (((( 1 << 2) - 1) & (value)) << 24)
-#define DANUBE_EBU_BUSCON2_CMULTR (value) (((( 1 << 2) - 1) & (value)) << 22)
-#define DANUBE_EBU_BUSCON2_WAIT (value) (((( 1 << 2) - 1) & (value)) << 20)
-#define DANUBE_EBU_BUSCON2_WAITINV (1 << 19)
-#define DANUBE_EBU_BUSCON2_SETUP (1 << 18)
-#define DANUBE_EBU_BUSCON2_PORTW (value) (((( 1 << 2) - 1) & (value)) << 16)
-#define DANUBE_EBU_BUSCON2_WAITRDC (value) (((( 1 << 7) - 1) & (value)) << 9)
-#define DANUBE_EBU_BUSCON2_WAITWRC (value) (((( 1 << 3) - 1) & (value)) << 6)
-#define DANUBE_EBU_BUSCON2_HOLDC (value) (((( 1 << 2) - 1) & (value)) << 4)
-#define DANUBE_EBU_BUSCON2_RECOVC (value) (((( 1 << 2) - 1) & (value)) << 2)
-#define DANUBE_EBU_BUSCON2_CMULT (value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***********************************************************************/
-/* Module : SDRAM register address and bits */
-/***********************************************************************/
-
-#define DANUBE_SDRAM (0xBF800000)
-/***********************************************************************/
-
-
-/***MC Access Error Cause Register***/
-#define DANUBE_SDRAM_MC_ERRCAUSE ((volatile u32*)(DANUBE_SDRAM+ 0x0100))
-#define DANUBE_SDRAM_MC_ERRCAUSE_ERR (1 << 31)
-#define DANUBE_SDRAM_MC_ERRCAUSE_PORT (value) (((( 1 << 4) - 1) & (value)) << 16)
-#define DANUBE_SDRAM_MC_ERRCAUSE_CAUSE (value) (((( 1 << 2) - 1) & (value)) << 0)
-#define DANUBE_SDRAM_MC_ERRCAUSE_Res (value) (((( 1 << NaN) - 1) & (value)) << NaN)
-
-/***MC Access Error Address Register***/
-#define DANUBE_SDRAM_MC_ERRADDR ((volatile u32*)(DANUBE_SDRAM+ 0x0108))
-#define DANUBE_SDRAM_MC_ERRADDR_ADDR
-
-/***MC I/O General Purpose Register***/
-#define DANUBE_SDRAM_MC_IOGP ((volatile u32*)(DANUBE_SDRAM+ 0x0800))
-#define DANUBE_SDRAM_MC_IOGP_GPR6 (value) (((( 1 << 4) - 1) & (value)) << 28)
-#define DANUBE_SDRAM_MC_IOGP_GPR5 (value) (((( 1 << 4) - 1) & (value)) << 24)
-#define DANUBE_SDRAM_MC_IOGP_GPR4 (value) (((( 1 << 4) - 1) & (value)) << 20)
-#define DANUBE_SDRAM_MC_IOGP_GPR3 (value) (((( 1 << 4) - 1) & (value)) << 16)
-#define DANUBE_SDRAM_MC_IOGP_GPR2 (value) (((( 1 << 4) - 1) & (value)) << 12)
-#define DANUBE_SDRAM_MC_IOGP_CPS (1 << 11)
-#define DANUBE_SDRAM_MC_IOGP_CLKDELAY (value) (((( 1 << 3) - 1) & (value)) << 8)
-#define DANUBE_SDRAM_MC_IOGP_CLKRAT (value) (((( 1 << 4) - 1) & (value)) << 4)
-#define DANUBE_SDRAM_MC_IOGP_RDDEL (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***MC Self Refresh Register***/
-#define DANUBE_SDRAM_MC_SELFRFSH ((volatile u32*)(DANUBE_SDRAM+ 0x0A00))
-#define DANUBE_SDRAM_MC_SELFRFSH_PWDS (1 << 1)
-#define DANUBE_SDRAM_MC_SELFRFSH_PWD (1 << 0)
-#define DANUBE_SDRAM_MC_SELFRFSH_Res (value) (((( 1 << 30) - 1) & (value)) << 2)
-
-/***MC Enable Register***/
-#define DANUBE_SDRAM_MC_CTRLENA ((volatile u32*)(DANUBE_SDRAM+ 0x1000))
-#define DANUBE_SDRAM_MC_CTRLENA_ENA (1 << 0)
-#define DANUBE_SDRAM_MC_CTRLENA_Res (value) (((( 1 << 31) - 1) & (value)) << 1)
-
-/***MC Mode Register Setup Code***/
-#define DANUBE_SDRAM_MC_MRSCODE ((volatile u32*)(DANUBE_SDRAM+ 0x1008))
-#define DANUBE_SDRAM_MC_MRSCODE_UMC (value) (((( 1 << 5) - 1) & (value)) << 7)
-#define DANUBE_SDRAM_MC_MRSCODE_CL (value) (((( 1 << 3) - 1) & (value)) << 4)
-#define DANUBE_SDRAM_MC_MRSCODE_WT (1 << 3)
-#define DANUBE_SDRAM_MC_MRSCODE_BL (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***MC Configuration Data-word Width Register***/
-#define DANUBE_SDRAM_MC_CFGDW ((volatile u32*)(DANUBE_SDRAM+ 0x1010))
-#define DANUBE_SDRAM_MC_CFGDW_DW (value) (((( 1 << 4) - 1) & (value)) << 0)
-#define DANUBE_SDRAM_MC_CFGDW_Res (value) (((( 1 << 28) - 1) & (value)) << 4)
-
-/***MC Configuration Physical Bank 0 Register***/
-#define DANUBE_SDRAM_MC_CFGPB0 ((volatile u32*)(DANUBE_SDRAM+ 0x1018))
-#define DANUBE_SDRAM_MC_CFGPB0_MCSEN0 (value) (((( 1 << 4) - 1) & (value)) << 12)
-#define DANUBE_SDRAM_MC_CFGPB0_BANKN0 (value) (((( 1 << 4) - 1) & (value)) << 8)
-#define DANUBE_SDRAM_MC_CFGPB0_ROWW0 (value) (((( 1 << 4) - 1) & (value)) << 4)
-#define DANUBE_SDRAM_MC_CFGPB0_COLW0 (value) (((( 1 << 4) - 1) & (value)) << 0)
-#define DANUBE_SDRAM_MC_CFGPB0_Res (value) (((( 1 << 16) - 1) & (value)) << 16)
-
-/***MC Latency Register***/
-#define DANUBE_SDRAM_MC_LATENCY ((volatile u32*)(DANUBE_SDRAM+ 0x1038))
-#define DANUBE_SDRAM_MC_LATENCY_TRP (value) (((( 1 << 4) - 1) & (value)) << 16)
-#define DANUBE_SDRAM_MC_LATENCY_TRAS (value) (((( 1 << 4) - 1) & (value)) << 12)
-#define DANUBE_SDRAM_MC_LATENCY_TRCD (value) (((( 1 << 4) - 1) & (value)) << 8)
-#define DANUBE_SDRAM_MC_LATENCY_TDPL (value) (((( 1 << 4) - 1) & (value)) << 4)
-#define DANUBE_SDRAM_MC_LATENCY_TDAL (value) (((( 1 << 4) - 1) & (value)) << 0)
-#define DANUBE_SDRAM_MC_LATENCY_Res (value) (((( 1 << 12) - 1) & (value)) << 20)
-
-/***MC Refresh Cycle Time Register***/
-#define DANUBE_SDRAM_MC_TREFRESH ((volatile u32*)(DANUBE_SDRAM+ 0x1040))
-#define DANUBE_SDRAM_MC_TREFRESH_TREF (value) (((( 1 << 13) - 1) & (value)) << 0)
-#define DANUBE_SDRAM_MC_TREFRESH_Res (value) (((( 1 << 19) - 1) & (value)) << 13)
-
-
-/***********************************************************************/
-/* Module : GPTU register address and bits */
-/***********************************************************************/
-
-#define DANUBE_GPTU (0xB8000300)
-/***********************************************************************/
-
-
-/***GPT Clock Control Register***/
-#define DANUBE_GPTU_GPT_CLC ((volatile u32*)(DANUBE_GPTU+ 0x0000))
-#define DANUBE_GPTU_GPT_CLC_RMC (value) (((( 1 << 8) - 1) & (value)) << 8)
-#define DANUBE_GPTU_GPT_CLC_DISS (1 << 1)
-#define DANUBE_GPTU_GPT_CLC_DISR (1 << 0)
-
-/***GPT Timer 3 Control Register***/
-#define DANUBE_GPTU_GPT_T3CON ((volatile u32*)(DANUBE_GPTU+ 0x0014))
-#define DANUBE_GPTU_GPT_T3CON_T3RDIR (1 << 15)
-#define DANUBE_GPTU_GPT_T3CON_T3CHDIR (1 << 14)
-#define DANUBE_GPTU_GPT_T3CON_T3EDGE (1 << 13)
-#define DANUBE_GPTU_GPT_T3CON_BPS1 (value) (((( 1 << 2) - 1) & (value)) << 11)
-#define DANUBE_GPTU_GPT_T3CON_T3OTL (1 << 10)
-#define DANUBE_GPTU_GPT_T3CON_T3UD (1 << 7)
-#define DANUBE_GPTU_GPT_T3CON_T3R (1 << 6)
-#define DANUBE_GPTU_GPT_T3CON_T3M (value) (((( 1 << 3) - 1) & (value)) << 3)
-#define DANUBE_GPTU_GPT_T3CON_T3I (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***GPT Write Hardware Modified Timer 3 Control Register
-If set and clear bit are written concurrently with 1, the associated bit is not changed.***/
-#define DANUBE_GPTU_GPT_WHBT3CON ((volatile u32*)(DANUBE_GPTU+ 0x004C))
-#define DANUBE_GPTU_GPT_WHBT3CON_SETT3CHDIR (1 << 15)
-#define DANUBE_GPTU_GPT_WHBT3CON_CLRT3CHDIR (1 << 14)
-#define DANUBE_GPTU_GPT_WHBT3CON_SETT3EDGE (1 << 13)
-#define DANUBE_GPTU_GPT_WHBT3CON_CLRT3EDGE (1 << 12)
-#define DANUBE_GPTU_GPT_WHBT3CON_SETT3OTL (1 << 11)
-#define DANUBE_GPTU_GPT_WHBT3CON_CLRT3OTL (1 << 10)
-
-/***GPT Timer 2 Control Register***/
-#define DANUBE_GPTU_GPT_T2CON ((volatile u32*)(DANUBE_GPTU+ 0x0010))
-#define DANUBE_GPTU_GPT_T2CON_TxRDIR (1 << 15)
-#define DANUBE_GPTU_GPT_T2CON_TxCHDIR (1 << 14)
-#define DANUBE_GPTU_GPT_T2CON_TxEDGE (1 << 13)
-#define DANUBE_GPTU_GPT_T2CON_TxIRDIS (1 << 12)
-#define DANUBE_GPTU_GPT_T2CON_TxRC (1 << 9)
-#define DANUBE_GPTU_GPT_T2CON_TxUD (1 << 7)
-#define DANUBE_GPTU_GPT_T2CON_TxR (1 << 6)
-#define DANUBE_GPTU_GPT_T2CON_TxM (value) (((( 1 << 3) - 1) & (value)) << 3)
-#define DANUBE_GPTU_GPT_T2CON_TxI (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***GPT Timer 4 Control Register***/
-#define DANUBE_GPTU_GPT_T4CON ((volatile u32*)(DANUBE_GPTU+ 0x0018))
-#define DANUBE_GPTU_GPT_T4CON_TxRDIR (1 << 15)
-#define DANUBE_GPTU_GPT_T4CON_TxCHDIR (1 << 14)
-#define DANUBE_GPTU_GPT_T4CON_TxEDGE (1 << 13)
-#define DANUBE_GPTU_GPT_T4CON_TxIRDIS (1 << 12)
-#define DANUBE_GPTU_GPT_T4CON_TxRC (1 << 9)
-#define DANUBE_GPTU_GPT_T4CON_TxUD (1 << 7)
-#define DANUBE_GPTU_GPT_T4CON_TxR (1 << 6)
-#define DANUBE_GPTU_GPT_T4CON_TxM (value) (((( 1 << 3) - 1) & (value)) << 3)
-#define DANUBE_GPTU_GPT_T4CON_TxI (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***GPT Write HW Modified Timer 2 Control Register If set
- and clear bit are written concurrently with 1, the associated bit is not changed.***/
-#define DANUBE_GPTU_GPT_WHBT2CON ((volatile u32*)(DANUBE_GPTU+ 0x0048))
-#define DANUBE_GPTU_GPT_WHBT2CON_SETTxCHDIR (1 << 15)
-#define DANUBE_GPTU_GPT_WHBT2CON_CLRTxCHDIR (1 << 14)
-#define DANUBE_GPTU_GPT_WHBT2CON_SETTxEDGE (1 << 13)
-#define DANUBE_GPTU_GPT_WHBT2CON_CLRTxEDGE (1 << 12)
-
-/***GPT Write HW Modified Timer 4 Control Register If set
- and clear bit are written concurrently with 1, the associated bit is not changed.***/
-#define DANUBE_GPTU_GPT_WHBT4CON ((volatile u32*)(DANUBE_GPTU+ 0x0050))
-#define DANUBE_GPTU_GPT_WHBT4CON_SETTxCHDIR (1 << 15)
-#define DANUBE_GPTU_GPT_WHBT4CON_CLRTxCHDIR (1 << 14)
-#define DANUBE_GPTU_GPT_WHBT4CON_SETTxEDGE (1 << 13)
-#define DANUBE_GPTU_GPT_WHBT4CON_CLRTxEDGE (1 << 12)
-
-/***GPT Capture Reload Register***/
-#define DANUBE_GPTU_GPT_CAPREL ((volatile u32*)(DANUBE_GPTU+ 0x0030))
-#define DANUBE_GPTU_GPT_CAPREL_CAPREL (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***GPT Timer 2 Register***/
-#define DANUBE_GPTU_GPT_T2 ((volatile u32*)(DANUBE_GPTU+ 0x0034))
-#define DANUBE_GPTU_GPT_T2_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***GPT Timer 3 Register***/
-#define DANUBE_GPTU_GPT_T3 ((volatile u32*)(DANUBE_GPTU+ 0x0038))
-#define DANUBE_GPTU_GPT_T3_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***GPT Timer 4 Register***/
-#define DANUBE_GPTU_GPT_T4 ((volatile u32*)(DANUBE_GPTU+ 0x003C))
-#define DANUBE_GPTU_GPT_T4_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***GPT Timer 5 Register***/
-#define DANUBE_GPTU_GPT_T5 ((volatile u32*)(DANUBE_GPTU+ 0x0040))
-#define DANUBE_GPTU_GPT_T5_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***GPT Timer 6 Register***/
-#define DANUBE_GPTU_GPT_T6 ((volatile u32*)(DANUBE_GPTU+ 0x0044))
-#define DANUBE_GPTU_GPT_T6_TVAL (value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***GPT Timer 6 Control Register***/
-#define DANUBE_GPTU_GPT_T6CON ((volatile u32*)(DANUBE_GPTU+ 0x0020))
-#define DANUBE_GPTU_GPT_T6CON_T6SR (1 << 15)
-#define DANUBE_GPTU_GPT_T6CON_T6CLR (1 << 14)
-#define DANUBE_GPTU_GPT_T6CON_BPS2 (value) (((( 1 << 2) - 1) & (value)) << 11)
-#define DANUBE_GPTU_GPT_T6CON_T6OTL (1 << 10)
-#define DANUBE_GPTU_GPT_T6CON_T6UD (1 << 7)
-#define DANUBE_GPTU_GPT_T6CON_T6R (1 << 6)
-#define DANUBE_GPTU_GPT_T6CON_T6M (value) (((( 1 << 3) - 1) & (value)) << 3)
-#define DANUBE_GPTU_GPT_T6CON_T6I (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-/***GPT Write HW Modified Timer 6 Control Register If set
- and clear bit are written concurrently with 1, the associated bit is not changed.***/
-#define DANUBE_GPTU_GPT_WHBT6CON ((volatile u32*)(DANUBE_GPTU+ 0x0054))
-#define DANUBE_GPTU_GPT_WHBT6CON_SETT6OTL (1 << 11)
-#define DANUBE_GPTU_GPT_WHBT6CON_CLRT6OTL (1 << 10)
-
-/***GPT Timer 5 Control Register***/
-#define DANUBE_GPTU_GPT_T5CON ((volatile u32*)(DANUBE_GPTU+ 0x001C))
-#define DANUBE_GPTU_GPT_T5CON_T5SC (1 << 15)
-#define DANUBE_GPTU_GPT_T5CON_T5CLR (1 << 14)
-#define DANUBE_GPTU_GPT_T5CON_CI (value) (((( 1 << 2) - 1) & (value)) << 12)
-#define DANUBE_GPTU_GPT_T5CON_T5CC (1 << 11)
-#define DANUBE_GPTU_GPT_T5CON_CT3 (1 << 10)
-#define DANUBE_GPTU_GPT_T5CON_T5RC (1 << 9)
-#define DANUBE_GPTU_GPT_T5CON_T5UDE (1 << 8)
-#define DANUBE_GPTU_GPT_T5CON_T5UD (1 << 7)
-#define DANUBE_GPTU_GPT_T5CON_T5R (1 << 6)
-#define DANUBE_GPTU_GPT_T5CON_T5M (value) (((( 1 << 3) - 1) & (value)) << 3)
-#define DANUBE_GPTU_GPT_T5CON_T5I (value) (((( 1 << 3) - 1) & (value)) << 0)
-
-
-/***********************************************************************/
-/* Module : IOM register address and bits */
-/***********************************************************************/
-
-#define DANUBE_IOM (0xBF105000)
-/***********************************************************************/
-
-
-/***Receive FIFO***/
-#define DANUBE_IOM_RFIFO ((volatile u32*)(DANUBE_IOM+ 0x0000))
-#define DANUBE_IOM_RFIFO_RXD (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***Transmit FIFO***/
-#define DANUBE_IOM_XFIFO ((volatile u32*)(DANUBE_IOM+ 0x0000))
-#define DANUBE_IOM_XFIFO_TXD (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***Interrupt Status Register HDLC***/
-#define DANUBE_IOM_ISTAH ((volatile u32*)(DANUBE_IOM+ 0x0080))
-#define DANUBE_IOM_ISTAH_RME (1 << 7)
-#define DANUBE_IOM_ISTAH_RPF (1 << 6)
-#define DANUBE_IOM_ISTAH_RFO (1 << 5)
-#define DANUBE_IOM_ISTAH_XPR (1 << 4)
-#define DANUBE_IOM_ISTAH_XMR (1 << 3)
-#define DANUBE_IOM_ISTAH_XDU (1 << 2)
-
-/***Interrupt Mask Register HDLC***/
-#define DANUBE_IOM_MASKH ((volatile u32*)(DANUBE_IOM+ 0x0080))
-#define DANUBE_IOM_MASKH_RME (1 << 7)
-#define DANUBE_IOM_MASKH_RPF (1 << 6)
-#define DANUBE_IOM_MASKH_RFO (1 << 5)
-#define DANUBE_IOM_MASKH_XPR (1 << 4)
-#define DANUBE_IOM_MASKH_XMR (1 << 3)
-#define DANUBE_IOM_MASKH_XDU (1 << 2)
-
-/***Status Register***/
-#define DANUBE_IOM_STAR ((volatile u32*)(DANUBE_IOM+ 0x0084))
-#define DANUBE_IOM_STAR_XDOV (1 << 7)
-#define DANUBE_IOM_STAR_XFW (1 << 6)
-#define DANUBE_IOM_STAR_RACI (1 << 3)
-#define DANUBE_IOM_STAR_XACI (1 << 1)
-
-/***Command Register***/
-#define DANUBE_IOM_CMDR ((volatile u32*)(DANUBE_IOM+ 0x0084))
-#define DANUBE_IOM_CMDR_RMC (1 << 7)
-#define DANUBE_IOM_CMDR_RRES (1 << 6)
-#define DANUBE_IOM_CMDR_XTF (1 << 3)
-#define DANUBE_IOM_CMDR_XME (1 << 1)
-#define DANUBE_IOM_CMDR_XRES (1 << 0)
-
-/***Mode Register***/
-#define DANUBE_IOM_MODEH ((volatile u32*)(DANUBE_IOM+ 0x0088))
-#define DANUBE_IOM_MODEH_MDS2 (1 << 7)
-#define DANUBE_IOM_MODEH_MDS1 (1 << 6)
-#define DANUBE_IOM_MODEH_MDS0 (1 << 5)
-#define DANUBE_IOM_MODEH_RAC (1 << 3)
-#define DANUBE_IOM_MODEH_DIM2 (1 << 2)
-#define DANUBE_IOM_MODEH_DIM1 (1 << 1)
-#define DANUBE_IOM_MODEH_DIM0 (1 << 0)
-
-/***Extended Mode Register***/
-#define DANUBE_IOM_EXMR ((volatile u32*)(DANUBE_IOM+ 0x008C))
-#define DANUBE_IOM_EXMR_XFBS (1 << 7)
-#define DANUBE_IOM_EXMR_RFBS (value) (((( 1 << 2) - 1) & (value)) << 5)
-#define DANUBE_IOM_EXMR_SRA (1 << 4)
-#define DANUBE_IOM_EXMR_XCRC (1 << 3)
-#define DANUBE_IOM_EXMR_RCRC (1 << 2)
-#define DANUBE_IOM_EXMR_ITF (1 << 0)
-
-/***SAPI1 Register***/
-#define DANUBE_IOM_SAP1 ((volatile u32*)(DANUBE_IOM+ 0x0094))
-#define DANUBE_IOM_SAP1_SAPI1 (value) (((( 1 << 6) - 1) & (value)) << 2)
-#define DANUBE_IOM_SAP1_MHA (1 << 0)
-
-/***Receive Frame Byte Count Low***/
-#define DANUBE_IOM_RBCL ((volatile u32*)(DANUBE_IOM+ 0x0098))
-#define DANUBE_IOM_RBCL_RBC(value) (1 << value)
-
-
-/***SAPI2 Register***/
-#define DANUBE_IOM_SAP2 ((volatile u32*)(DANUBE_IOM+ 0x0098))
-#define DANUBE_IOM_SAP2_SAPI2 (value) (((( 1 << 6) - 1) & (value)) << 2)
-#define DANUBE_IOM_SAP2_MLA (1 << 0)
-
-/***Receive Frame Byte Count High***/
-#define DANUBE_IOM_RBCH ((volatile u32*)(DANUBE_IOM+ 0x009C))
-#define DANUBE_IOM_RBCH_OV (1 << 4)
-#define DANUBE_IOM_RBCH_RBC11 (1 << 3)
-#define DANUBE_IOM_RBCH_RBC10 (1 << 2)
-#define DANUBE_IOM_RBCH_RBC9 (1 << 1)
-#define DANUBE_IOM_RBCH_RBC8 (1 << 0)
-
-/***TEI1 Register 1***/
-#define DANUBE_IOM_TEI1 ((volatile u32*)(DANUBE_IOM+ 0x009C))
-#define DANUBE_IOM_TEI1_TEI1 (value) (((( 1 << 7) - 1) & (value)) << 1)
-#define DANUBE_IOM_TEI1_EA (1 << 0)
-
-/***Receive Status Register***/
-#define DANUBE_IOM_RSTA ((volatile u32*)(DANUBE_IOM+ 0x00A0))
-#define DANUBE_IOM_RSTA_VFR (1 << 7)
-#define DANUBE_IOM_RSTA_RDO (1 << 6)
-#define DANUBE_IOM_RSTA_CRC (1 << 5)
-#define DANUBE_IOM_RSTA_RAB (1 << 4)
-#define DANUBE_IOM_RSTA_SA1 (1 << 3)
-#define DANUBE_IOM_RSTA_SA0 (1 << 2)
-#define DANUBE_IOM_RSTA_TA (1 << 0)
-#define DANUBE_IOM_RSTA_CR (1 << 1)
-
-/***TEI2 Register***/
-#define DANUBE_IOM_TEI2 ((volatile u32*)(DANUBE_IOM+ 0x00A0))
-#define DANUBE_IOM_TEI2_TEI2 (value) (((( 1 << 7) - 1) & (value)) << 1)
-#define DANUBE_IOM_TEI2_EA (1 << 0)
-
-/***Test Mode Register HDLC***/
-#define DANUBE_IOM_TMH ((volatile u32*)(DANUBE_IOM+ 0x00A4))
-#define DANUBE_IOM_TMH_TLP (1 << 0)
-
-/***Command/Indication Receive 0***/
-#define DANUBE_IOM_CIR0 ((volatile u32*)(DANUBE_IOM+ 0x00B8))
-#define DANUBE_IOM_CIR0_CODR0 (value) (((( 1 << 4) - 1) & (value)) << 4)
-#define DANUBE_IOM_CIR0_CIC0 (1 << 3)
-#define DANUBE_IOM_CIR0_CIC1 (1 << 2)
-#define DANUBE_IOM_CIR0_SG (1 << 1)
-#define DANUBE_IOM_CIR0_BAS (1 << 0)
-
-/***Command/Indication Transmit 0***/
-#define DANUBE_IOM_CIX0 ((volatile u32*)(DANUBE_IOM+ 0x00B8))
-#define DANUBE_IOM_CIX0_CODX0 (value) (((( 1 << 4) - 1) & (value)) << 4)
-#define DANUBE_IOM_CIX0_TBA2 (1 << 3)
-#define DANUBE_IOM_CIX0_TBA1 (1 << 2)
-#define DANUBE_IOM_CIX0_TBA0 (1 << 1)
-#define DANUBE_IOM_CIX0_BAC (1 << 0)
-
-/***Command/Indication Receive 1***/
-#define DANUBE_IOM_CIR1 ((volatile u32*)(DANUBE_IOM+ 0x00BC))
-#define DANUBE_IOM_CIR1_CODR1 (value) (((( 1 << 6) - 1) & (value)) << 2)
-
-/***Command/Indication Transmit 1***/
-#define DANUBE_IOM_CIX1 ((volatile u32*)(DANUBE_IOM+ 0x00BC))
-#define DANUBE_IOM_CIX1_CODX1 (value) (((( 1 << 6) - 1) & (value)) << 2)
-#define DANUBE_IOM_CIX1_CICW (1 << 1)
-#define DANUBE_IOM_CIX1_CI1E (1 << 0)
-
-/***Controller Data Access Reg. (CH10)***/
-#define DANUBE_IOM_CDA10 ((volatile u32*)(DANUBE_IOM+ 0x0100))
-#define DANUBE_IOM_CDA10_CDA (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***Controller Data Access Reg. (CH11)***/
-#define DANUBE_IOM_CDA11 ((volatile u32*)(DANUBE_IOM+ 0x0104))
-#define DANUBE_IOM_CDA11_CDA (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***Controller Data Access Reg. (CH20)***/
-#define DANUBE_IOM_CDA20 ((volatile u32*)(DANUBE_IOM+ 0x0108))
-#define DANUBE_IOM_CDA20_CDA (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***Controller Data Access Reg. (CH21)***/
-#define DANUBE_IOM_CDA21 ((volatile u32*)(DANUBE_IOM+ 0x010C))
-#define DANUBE_IOM_CDA21_CDA (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***Time Slot and Data Port Sel. (CH10)***/
-#define DANUBE_IOM_CDA_TSDP10 ((volatile u32*)(DANUBE_IOM+ 0x0110))
-#define DANUBE_IOM_CDA_TSDP10_DPS (1 << 7)
-#define DANUBE_IOM_CDA_TSDP10_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Time Slot and Data Port Sel. (CH11)***/
-#define DANUBE_IOM_CDA_TSDP11 ((volatile u32*)(DANUBE_IOM+ 0x0114))
-#define DANUBE_IOM_CDA_TSDP11_DPS (1 << 7)
-#define DANUBE_IOM_CDA_TSDP11_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Time Slot and Data Port Sel. (CH20)***/
-#define DANUBE_IOM_CDA_TSDP20 ((volatile u32*)(DANUBE_IOM+ 0x0118))
-#define DANUBE_IOM_CDA_TSDP20_DPS (1 << 7)
-#define DANUBE_IOM_CDA_TSDP20_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Time Slot and Data Port Sel. (CH21)***/
-#define DANUBE_IOM_CDA_TSDP21 ((volatile u32*)(DANUBE_IOM+ 0x011C))
-#define DANUBE_IOM_CDA_TSDP21_DPS (1 << 7)
-#define DANUBE_IOM_CDA_TSDP21_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Time Slot and Data Port Sel. (CH10)***/
-#define DANUBE_IOM_CO_TSDP10 ((volatile u32*)(DANUBE_IOM+ 0x0120))
-#define DANUBE_IOM_CO_TSDP10_DPS (1 << 7)
-#define DANUBE_IOM_CO_TSDP10_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Time Slot and Data Port Sel. (CH11)***/
-#define DANUBE_IOM_CO_TSDP11 ((volatile u32*)(DANUBE_IOM+ 0x0124))
-#define DANUBE_IOM_CO_TSDP11_DPS (1 << 7)
-#define DANUBE_IOM_CO_TSDP11_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Time Slot and Data Port Sel. (CH20)***/
-#define DANUBE_IOM_CO_TSDP20 ((volatile u32*)(DANUBE_IOM+ 0x0128))
-#define DANUBE_IOM_CO_TSDP20_DPS (1 << 7)
-#define DANUBE_IOM_CO_TSDP20_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Time Slot and Data Port Sel. (CH21)***/
-#define DANUBE_IOM_CO_TSDP21 ((volatile u32*)(DANUBE_IOM+ 0x012C))
-#define DANUBE_IOM_CO_TSDP21_DPS (1 << 7)
-#define DANUBE_IOM_CO_TSDP21_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Ctrl. Reg. Contr. Data Access CH1x***/
-#define DANUBE_IOM_CDA1_CR ((volatile u32*)(DANUBE_IOM+ 0x0138))
-#define DANUBE_IOM_CDA1_CR_EN_TBM (1 << 5)
-#define DANUBE_IOM_CDA1_CR_EN_I1 (1 << 4)
-#define DANUBE_IOM_CDA1_CR_EN_I0 (1 << 3)
-#define DANUBE_IOM_CDA1_CR_EN_O1 (1 << 2)
-#define DANUBE_IOM_CDA1_CR_EN_O0 (1 << 1)
-#define DANUBE_IOM_CDA1_CR_SWAP (1 << 0)
-
-/***Ctrl. Reg. Contr. Data Access CH1x***/
-#define DANUBE_IOM_CDA2_CR ((volatile u32*)(DANUBE_IOM+ 0x013C))
-#define DANUBE_IOM_CDA2_CR_EN_TBM (1 << 5)
-#define DANUBE_IOM_CDA2_CR_EN_I1 (1 << 4)
-#define DANUBE_IOM_CDA2_CR_EN_I0 (1 << 3)
-#define DANUBE_IOM_CDA2_CR_EN_O1 (1 << 2)
-#define DANUBE_IOM_CDA2_CR_EN_O0 (1 << 1)
-#define DANUBE_IOM_CDA2_CR_SWAP (1 << 0)
-
-/***Control Register B-Channel Data***/
-#define DANUBE_IOM_BCHA_CR ((volatile u32*)(DANUBE_IOM+ 0x0144))
-#define DANUBE_IOM_BCHA_CR_EN_BC2 (1 << 4)
-#define DANUBE_IOM_BCHA_CR_EN_BC1 (1 << 3)
-
-/***Control Register B-Channel Data***/
-#define DANUBE_IOM_BCHB_CR ((volatile u32*)(DANUBE_IOM+ 0x0148))
-#define DANUBE_IOM_BCHB_CR_EN_BC2 (1 << 4)
-#define DANUBE_IOM_BCHB_CR_EN_BC1 (1 << 3)
-
-/***Control Reg. for HDLC and CI1 Data***/
-#define DANUBE_IOM_DCI_CR ((volatile u32*)(DANUBE_IOM+ 0x014C))
-#define DANUBE_IOM_DCI_CR_DPS_CI1 (1 << 7)
-#define DANUBE_IOM_DCI_CR_EN_CI1 (1 << 6)
-#define DANUBE_IOM_DCI_CR_EN_D (1 << 5)
-
-/***Control Reg. for HDLC and CI1 Data***/
-#define DANUBE_IOM_DCIC_CR ((volatile u32*)(DANUBE_IOM+ 0x014C))
-#define DANUBE_IOM_DCIC_CR_DPS_CI0 (1 << 7)
-#define DANUBE_IOM_DCIC_CR_EN_CI0 (1 << 6)
-#define DANUBE_IOM_DCIC_CR_DPS_D (1 << 5)
-
-/***Control Reg. Serial Data Strobe x***/
-#define DANUBE_IOM_SDS_CR ((volatile u32*)(DANUBE_IOM+ 0x0154))
-#define DANUBE_IOM_SDS_CR_ENS_TSS (1 << 7)
-#define DANUBE_IOM_SDS_CR_ENS_TSS_1 (1 << 6)
-#define DANUBE_IOM_SDS_CR_ENS_TSS_3 (1 << 5)
-#define DANUBE_IOM_SDS_CR_TSS (value) (((( 1 << 4) - 1) & (value)) << 0)
-
-/***Control Register IOM Data***/
-#define DANUBE_IOM_IOM_CR ((volatile u32*)(DANUBE_IOM+ 0x015C))
-#define DANUBE_IOM_IOM_CR_SPU (1 << 7)
-#define DANUBE_IOM_IOM_CR_CI_CS (1 << 5)
-#define DANUBE_IOM_IOM_CR_TIC_DIS (1 << 4)
-#define DANUBE_IOM_IOM_CR_EN_BCL (1 << 3)
-#define DANUBE_IOM_IOM_CR_CLKM (1 << 2)
-#define DANUBE_IOM_IOM_CR_Res (1 << 1)
-#define DANUBE_IOM_IOM_CR_DIS_IOM (1 << 0)
-
-/***Synchronous Transfer Interrupt***/
-#define DANUBE_IOM_STI ((volatile u32*)(DANUBE_IOM+ 0x0160))
-#define DANUBE_IOM_STI_STOV21 (1 << 7)
-#define DANUBE_IOM_STI_STOV20 (1 << 6)
-#define DANUBE_IOM_STI_STOV11 (1 << 5)
-#define DANUBE_IOM_STI_STOV10 (1 << 4)
-#define DANUBE_IOM_STI_STI21 (1 << 3)
-#define DANUBE_IOM_STI_STI20 (1 << 2)
-#define DANUBE_IOM_STI_STI11 (1 << 1)
-#define DANUBE_IOM_STI_STI10 (1 << 0)
-
-/***Acknowledge Synchronous Transfer Interrupt***/
-#define DANUBE_IOM_ASTI ((volatile u32*)(DANUBE_IOM+ 0x0160))
-#define DANUBE_IOM_ASTI_ACK21 (1 << 3)
-#define DANUBE_IOM_ASTI_ACK20 (1 << 2)
-#define DANUBE_IOM_ASTI_ACK11 (1 << 1)
-#define DANUBE_IOM_ASTI_ACK10 (1 << 0)
-
-/***Mask Synchronous Transfer Interrupt***/
-#define DANUBE_IOM_MSTI ((volatile u32*)(DANUBE_IOM+ 0x0164))
-#define DANUBE_IOM_MSTI_STOV21 (1 << 7)
-#define DANUBE_IOM_MSTI_STOV20 (1 << 6)
-#define DANUBE_IOM_MSTI_STOV11 (1 << 5)
-#define DANUBE_IOM_MSTI_STOV10 (1 << 4)
-#define DANUBE_IOM_MSTI_STI21 (1 << 3)
-#define DANUBE_IOM_MSTI_STI20 (1 << 2)
-#define DANUBE_IOM_MSTI_STI11 (1 << 1)
-#define DANUBE_IOM_MSTI_STI10 (1 << 0)
-
-/***Configuration Register for Serial Data Strobes***/
-#define DANUBE_IOM_SDS_CONF ((volatile u32*)(DANUBE_IOM+ 0x0168))
-#define DANUBE_IOM_SDS_CONF_SDS_BCL (1 << 0)
-
-/***Monitoring CDA Bits***/
-#define DANUBE_IOM_MCDA ((volatile u32*)(DANUBE_IOM+ 0x016C))
-#define DANUBE_IOM_MCDA_MCDA21 (value) (((( 1 << 2) - 1) & (value)) << 6)
-#define DANUBE_IOM_MCDA_MCDA20 (value) (((( 1 << 2) - 1) & (value)) << 4)
-#define DANUBE_IOM_MCDA_MCDA11 (value) (((( 1 << 2) - 1) & (value)) << 2)
-#define DANUBE_IOM_MCDA_MCDA10 (value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***********************************************************************/
-/* Module : ASC0 register address and bits */
-/***********************************************************************/
-#define DANUBE_ASC0 (KSEG1+0x1E100400)
-/***********************************************************************/
-#define DANUBE_ASC0_TBUF ((volatile u32*)(DANUBE_ASC0 + 0x0020))
-#define DANUBE_ASC0_RBUF ((volatile u32*)(DANUBE_ASC0 + 0x0024))
-#define DANUBE_ASC0_FSTAT ((volatile u32*)(DANUBE_ASC0 + 0x0048))
-#define DANUBE_ASC0_FSTAT_TXFREE_GET(value) (((value) >> 24) & ((1 << 6) - 1))
-#define DANUBE_ASC0_FSTAT_TXFREE_SET(value) (((( 1 << 6) - 1) & (value)) << 24)
-#define DANUBE_ASC0_FSTAT_RXFREE_GET(value) (((value) >> 16) & ((1 << 6) - 1))
-#define DANUBE_ASC0_FSTAT_RXFREE_SET(value) (((( 1 << 6) - 1) & (value)) << 16)
-#define DANUBE_ASC0_FSTAT_TXFFL_GET(value) (((value) >> 8) & ((1 << 6) - 1))
-#define DANUBE_ASC0_FSTAT_TXFFL_SET(value) (((( 1 << 6) - 1) & (value)) << 8)
-#define DANUBE_ASC0_FSTAT_RXFFL_GET(value) (((value) >> 0) & ((1 << 6) - 1))
-#define DANUBE_ASC0_FSTAT_RXFFL_SET(value) (((( 1 << 6) - 1) & (value)) << 0)
-
-
-/***********************************************************************/
-/* Module : ASC1 register address and bits */
-/***********************************************************************/
-
-#define DANUBE_ASC1 (KSEG1+0x1E100C00)
- /***********************************************************************/
-
-#define DANUBE_ASC1_TBUF ((volatile u32*)(DANUBE_ASC1 + 0x0020))
-#define DANUBE_ASC1_RBUF ((volatile u32*)(DANUBE_ASC1 + 0x0024))
-#define DANUBE_ASC1_FSTAT ((volatile u32*)(DANUBE_ASC1 + 0x0048))
-#define DANUBE_ASC1_FSTAT_TXFREE_GET(value) (((value) >> 24) & ((1 << 6) - 1))
-#define DANUBE_ASC1_FSTAT_TXFREE_SET(value) (((( 1 << 6) - 1) & (value)) << 24)
-#define DANUBE_ASC1_FSTAT_RXFREE_GET(value) (((value) >> 16) & ((1 << 6) - 1))
-#define DANUBE_ASC1_FSTAT_RXFREE_SET(value) (((( 1 << 6) - 1) & (value)) << 16)
-#define DANUBE_ASC1_FSTAT_TXFFL_GET(value) (((value) >> 8) & ((1 << 6) - 1))
-#define DANUBE_ASC1_FSTAT_TXFFL_SET(value) (((( 1 << 6) - 1) & (value)) << 8)
-#define DANUBE_ASC1_FSTAT_RXFFL_GET(value) (((value) >> 0) & ((1 << 6) - 1))
-#define DANUBE_ASC1_FSTAT_RXFFL_SET(value) (((( 1 << 6) - 1) & (value)) << 0)
-
-/***********************************************************************/
-/* Module : DMA register address and bits */
-/***********************************************************************/
-/***********************************************************************/
-/* Module : DMA register address and bits */
-/***********************************************************************/
-
-#define DANUBE_DMA (0xBE104100)
-/***********************************************************************/
-
-#define DANUBE_DMA_BASE DANUBE_DMA
-#define DANUBE_DMA_CLC (volatile u32*)DANUBE_DMA_BASE
-#define DANUBE_DMA_ID (volatile u32*)(DANUBE_DMA_BASE+0x08)
-#define DANUBE_DMA_CTRL (volatile u32*)(DANUBE_DMA_BASE+0x10)
-#define DANUBE_DMA_CPOLL (volatile u32*)(DANUBE_DMA_BASE+0x14)
-#define DANUBE_DMA_CS (volatile u32*)(DANUBE_DMA_BASE+0x18)
-#define DANUBE_DMA_CCTRL (volatile u32*)(DANUBE_DMA_BASE+0x1C)
-#define DANUBE_DMA_CDBA (volatile u32*)(DANUBE_DMA_BASE+0x20)
-#define DANUBE_DMA_CDLEN (volatile u32*)(DANUBE_DMA_BASE+0x24)
-#define DANUBE_DMA_CIS (volatile u32*)(DANUBE_DMA_BASE+0x28)
-#define DANUBE_DMA_CIE (volatile u32*)(DANUBE_DMA_BASE+0x2C)
-
-#define DANUBE_DMA_PS (volatile u32*)(DANUBE_DMA_BASE+0x40)
-#define DANUBE_DMA_PCTRL (volatile u32*)(DANUBE_DMA_BASE+0x44)
-
-#define DANUBE_DMA_IRNEN (volatile u32*)(DANUBE_DMA_BASE+0xf4)
-#define DANUBE_DMA_IRNCR (volatile u32*)(DANUBE_DMA_BASE+0xf8)
-#define DANUBE_DMA_IRNICR (volatile u32*)(DANUBE_DMA_BASE+0xfc)
-/***********************************************************************/
-/* Module : Debug register address and bits */
-/***********************************************************************/
-
-#define DANUBE_Debug (0xBF106000)
-/***********************************************************************/
-
-
-/***MCD Break Bus Switch Register***/
-#define DANUBE_Debug_MCD_BBS ((volatile u32*)(DANUBE_Debug+ 0x0000))
-#define DANUBE_Debug_MCD_BBS_BTP1 (1 << 19)
-#define DANUBE_Debug_MCD_BBS_BTP0 (1 << 18)
-#define DANUBE_Debug_MCD_BBS_BSP1 (1 << 17)
-#define DANUBE_Debug_MCD_BBS_BSP0 (1 << 16)
-#define DANUBE_Debug_MCD_BBS_BT5EN (1 << 15)
-#define DANUBE_Debug_MCD_BBS_BT4EN (1 << 14)
-#define DANUBE_Debug_MCD_BBS_BT5 (1 << 13)
-#define DANUBE_Debug_MCD_BBS_BT4 (1 << 12)
-#define DANUBE_Debug_MCD_BBS_BS5EN (1 << 7)
-#define DANUBE_Debug_MCD_BBS_BS4EN (1 << 6)
-#define DANUBE_Debug_MCD_BBS_BS5 (1 << 5)
-#define DANUBE_Debug_MCD_BBS_BS4 (1 << 4)
-
-/***MCD Multiplexer Control Register***/
-#define DANUBE_Debug_MCD_MCR ((volatile u32*)(DANUBE_Debug+ 0x0008))
-#define DANUBE_Debug_MCD_MCR_MUX5 (1 << 4)
-#define DANUBE_Debug_MCD_MCR_MUX4 (1 << 3)
-#define DANUBE_Debug_MCD_MCR_MUX1 (1 << 0)
-
-
-/***********************************************************************/
-/* Module : SRAM register address and bits */
-/***********************************************************************/
-
-#define DANUBE_SRAM (0xBF980000)
-/***********************************************************************/
-
-
-/***SRAM Size Register***/
-#define DANUBE_SRAM_SRAM_SIZE ((volatile u32*)(DANUBE_SRAM+ 0x0800))
-#define DANUBE_SRAM_SRAM_SIZE_SIZE (value) (((( 1 << 23) - 1) & (value)) << 0)
-
-/***********************************************************************/
-/* Module : BIU register address and bits */
-/***********************************************************************/
-
-#define DANUBE_BIU (0xBFA80000)
-/***********************************************************************/
-
-
-/***BIU Identification Register***/
-#define DANUBE_BIU_BIU_ID ((volatile u32*)(DANUBE_BIU+ 0x0000))
-#define DANUBE_BIU_BIU_ID_ARCH (1 << 16)
-#define DANUBE_BIU_BIU_ID_ID (value) (((( 1 << 8) - 1) & (value)) << 8)
-#define DANUBE_BIU_BIU_ID_REV (value) (((( 1 << 8) - 1) & (value)) << 0)
-
-/***BIU Access Error Cause Register***/
-#define DANUBE_BIU_BIU_ERRCAUSE ((volatile u32*)(DANUBE_BIU+ 0x0100))
-#define DANUBE_BIU_BIU_ERRCAUSE_ERR (1 << 31)
-#define DANUBE_BIU_BIU_ERRCAUSE_PORT (value) (((( 1 << 4) - 1) & (value)) << 16)
-#define DANUBE_BIU_BIU_ERRCAUSE_CAUSE (value) (((( 1 << 2) - 1) & (value)) << 0)
-
-/***BIU Access Error Address Register***/
-#define DANUBE_BIU_BIU_ERRADDR ((volatile u32*)(DANUBE_BIU+ 0x0108))
-#define DANUBE_BIU_BIU_ERRADDR_ADDR
-
-
-/***********************************************************************/
-/* Module : ICU register address and bits */
-/***********************************************************************/
-
-#define DANUBE_ICU (0xBF880200)
-#define DANUBE_ICU (0xBF880200)
-#define DANUBE_ICU_EXI (0xBF101000)
-/***********************************************************************/
-
-
-/***IM0 Interrupt Status Register***/
-#define DANUBE_ICU_IM0_ISR ((volatile u32*)(DANUBE_ICU+ 0x0000))
-#define DANUBE_ICU_IM0_ISR_IR(value) (1 << (value))
-
-
-/***IM1 Interrupt Status Register***/
-#define DANUBE_ICU_IM1_ISR ((volatile u32*)(DANUBE_ICU+ 0x0020))
-#define DANUBE_ICU_IM1_ISR_IR(value) (1 << (value))
-
-
-/***IM2 Interrupt Status Register***/
-#define DANUBE_ICU_IM2_ISR ((volatile u32*)(DANUBE_ICU+ 0x0040))
-#define DANUBE_ICU_IM2_ISR_IR(value) (1 << (value))
-
-/***IM3 Interrupt Status Register***/
-#define DANUBE_ICU_IM3_ISR ((volatile u32*)(DANUBE_ICU+ 0x0060))
-#define DANUBE_ICU_IM3_ISR_IR(value) (1 << (value))
-
-/***IM4 Interrupt Status Register***/
-#define DANUBE_ICU_IM4_ISR ((volatile u32*)(DANUBE_ICU+ 0x0080))
-#define DANUBE_ICU_IM4_ISR_IR(value) (1 << (value))
-
-
-/***IM0 Interrupt Enable Register***/
-#define DANUBE_ICU_IM0_IER ((volatile u32*)(DANUBE_ICU+ 0x0008))
-#define DANUBE_ICU_IM0_IER_IR(value) (1 << (value))
-
-
-/***IM1 Interrupt Enable Register***/
-#define DANUBE_ICU_IM1_IER ((volatile u32*)(DANUBE_ICU+ 0x0028))
-#define DANUBE_ICU_IM1_IER_IR(value) (1 << (value))
-
-
-/***IM2 Interrupt Enable Register***/
-#define DANUBE_ICU_IM2_IER ((volatile u32*)(DANUBE_ICU+ 0x0048))
-#define DANUBE_ICU_IM2_IER_IR(value) (1 << (value)8
-
-/***IM3 Interrupt Enable Register***/
-#define DANUBE_ICU_IM3_IER ((volatile u32*)(DANUBE_ICU+ 0x0068))
-#define DANUBE_ICU_IM3_IER_IR(value) (1 << (value))
-
-/***IM4 Interrupt Enable Register***/
-#define DANUBE_ICU_IM4_IER ((volatile u32*)(DANUBE_ICU+ 0x0088))
-#define DANUBE_ICU_IM4_IER_IR(value) (1 << (value))
-
-
-/***IM0 Interrupt Output Status Register***/
-#define DANUBE_ICU_IM0_IOSR ((volatile u32*)(DANUBE_ICU+ 0x0010))
-#define DANUBE_ICU_IM0_IOSR_IR(value) (1 << (value))
-
-
-/***IM1 Interrupt Output Status Register***/
-#define DANUBE_ICU_IM1_IOSR ((volatile u32*)(DANUBE_ICU+ 0x0030))
-#define DANUBE_ICU_IM1_IOSR_IR(value) (1 << (value))
-
-
-/***IM2 Interrupt Output Status Register***/
-#define DANUBE_ICU_IM2_IOSR ((volatile u32*)(DANUBE_ICU+ 0x0050))
-#define DANUBE_ICU_IM2_IOSR_IR(value) (1 << (value))
-
-/***IM3 Interrupt Output Status Register***/
-#define DANUBE_ICU_IM3_IOSR ((volatile u32*)(DANUBE_ICU+ 0x0070))
-#define DANUBE_ICU_IM3_IOSR_IR(value) (1 << (value))
-
-/***IM4 Interrupt Output Status Register***/
-#define DANUBE_ICU_IM4_IOSR ((volatile u32*)(DANUBE_ICU+ 0x0090))
-#define DANUBE_ICU_IM4_IOSR_IR(value) (1 << (value))
-
-
-/***IM0 Interrupt Request Set Register***/
-#define DANUBE_ICU_IM0_IRSR ((volatile u32*)(DANUBE_ICU+ 0x0018))
-#define DANUBE_ICU_IM0_IRSR_IR(value) (1 << (value))
-
-
-/***IM1 Interrupt Request Set Register***/
-#define DANUBE_ICU_IM1_IRSR ((volatile u32*)(DANUBE_ICU+ 0x0038))
-#define DANUBE_ICU_IM1_IRSR_IR(value) (1 << (value))
-
-
-/***IM2 Interrupt Request Set Register***/
-#define DANUBE_ICU_IM2_IRSR ((volatile u32*)(DANUBE_ICU+ 0x0058))
-#define DANUBE_ICU_IM2_IRSR_IR(value) (1 << (value))
-
-/***IM3 Interrupt Request Set Register***/
-#define DANUBE_ICU_IM3_IRSR ((volatile u32*)(DANUBE_ICU+ 0x0078))
-#define DANUBE_ICU_IM3_IRSR_IR(value) (1 << (value))
-
-/***IM4 Interrupt Request Set Register***/
-#define DANUBE_ICU_IM4_IRSR ((volatile u32*)(DANUBE_ICU+ 0x0098))
-#define DANUBE_ICU_IM4_IRSR_IR(value) (1 << (value))
-
-/***Interrupt Vector Value Register***/
-#define DANUBE_ICU_IM_VEC ((volatile u32*)(DANUBE_ICU+ 0x0060))
-
-/***Interrupt Vector Value Mask***/
-#define DANUBE_ICU_IM0_VEC_MASK 0x0000001f
-#define DANUBE_ICU_IM1_VEC_MASK 0x000003e0
-#define DANUBE_ICU_IM2_VEC_MASK 0x00007c00
-#define DANUBE_ICU_IM3_VEC_MASK 0x000f8000
-#define DANUBE_ICU_IM4_VEC_MASK 0x01f00000
-
-/***DMA Interrupt Mask Value***/
-#define DANUBE_DMA_H_MASK 0x00000fff
-
-/***External Interrupt Control Register***/
-#define DANUBE_ICU_EXTINTCR ((volatile u32*)(DANUBE_ICU_EXI+ 0x0000))
-#define DANUBE_ICU_IRNICR ((volatile u32*)(DANUBE_ICU_EXI+ 0x0004))
-#define DANUBE_ICU_IRNCR ((volatile u32*)(DANUBE_ICU_EXI+ 0x0008))
-#define DANUBE_ICU_IRNEN ((volatile u32*)(DANUBE_ICU_EXI+ 0x000c))
-#define DANUBE_ICU_NMI_CR ((volatile u32*)(DANUBE_ICU_EXI+ 0x00f0))
-#define DANUBE_ICU_NMI_SR ((volatile u32*)(DANUBE_ICU_EXI+ 0x00f4))
-
-/***********************************************************************/
-/* Module : MPS register address and bits */
-/***********************************************************************/
-
-#define DANUBE_MPS (KSEG1+0x1F107000)
-/***********************************************************************/
-
-#define DANUBE_MPS_CHIPID ((volatile u32*)(DANUBE_MPS + 0x0344))
-#define DANUBE_MPS_CHIPID_VERSION_GET(value) (((value) >> 28) & ((1 << 4) - 1))
-#define DANUBE_MPS_CHIPID_VERSION_SET(value) (((( 1 << 4) - 1) & (value)) << 28)
-#define DANUBE_MPS_CHIPID_PARTNUM_GET(value) (((value) >> 12) & ((1 << 16) - 1))
-#define DANUBE_MPS_CHIPID_PARTNUM_SET(value) (((( 1 << 16) - 1) & (value)) << 12)
-#define DANUBE_MPS_CHIPID_MANID_GET(value) (((value) >> 1) & ((1 << 10) - 1))
-#define DANUBE_MPS_CHIPID_MANID_SET(value) (((( 1 << 10) - 1) & (value)) << 1)
-
-
-/* voice channel 0 ... 3 interrupt enable register */
-#define DANUBE_MPS_VC0ENR ((volatile u32*)(DANUBE_MPS + 0x0000))
-#define DANUBE_MPS_VC1ENR ((volatile u32*)(DANUBE_MPS + 0x0004))
-#define DANUBE_MPS_VC2ENR ((volatile u32*)(DANUBE_MPS + 0x0008))
-#define DANUBE_MPS_VC3ENR ((volatile u32*)(DANUBE_MPS + 0x000C))
-/* voice channel 0 ... 3 interrupt status read register */
-#define DANUBE_MPS_RVC0SR ((volatile u32*)(DANUBE_MPS + 0x0010))
-#define DANUBE_MPS_RVC1SR ((volatile u32*)(DANUBE_MPS + 0x0014))
-#define DANUBE_MPS_RVC2SR ((volatile u32*)(DANUBE_MPS + 0x0018))
-#define DANUBE_MPS_RVC3SR ((volatile u32*)(DANUBE_MPS + 0x001C))
-/* voice channel 0 ... 3 interrupt status set register */
-#define DANUBE_MPS_SVC0SR ((volatile u32*)(DANUBE_MPS + 0x0020))
-#define DANUBE_MPS_SVC1SR ((volatile u32*)(DANUBE_MPS + 0x0024))
-#define DANUBE_MPS_SVC2SR ((volatile u32*)(DANUBE_MPS + 0x0028))
-#define DANUBE_MPS_SVC3SR ((volatile u32*)(DANUBE_MPS + 0x002C))
-/* voice channel 0 ... 3 interrupt status clear register */
-#define DANUBE_MPS_CVC0SR ((volatile u32*)(DANUBE_MPS + 0x0030))
-#define DANUBE_MPS_CVC1SR ((volatile u32*)(DANUBE_MPS + 0x0034))
-#define DANUBE_MPS_CVC2SR ((volatile u32*)(DANUBE_MPS + 0x0038))
-#define DANUBE_MPS_CVC3SR ((volatile u32*)(DANUBE_MPS + 0x003C))
-/* common status 0 and 1 read register */
-#define DANUBE_MPS_RAD0SR ((volatile u32*)(DANUBE_MPS + 0x0040))
-#define DANUBE_MPS_RAD1SR ((volatile u32*)(DANUBE_MPS + 0x0044))
-/* common status 0 and 1 set register */
-#define DANUBE_MPS_SAD0SR ((volatile u32*)(DANUBE_MPS + 0x0048))
-#define DANUBE_MPS_SAD1SR ((volatile u32*)(DANUBE_MPS + 0x004C))
-/* common status 0 and 1 clear register */
-#define DANUBE_MPS_CAD0SR ((volatile u32*)(DANUBE_MPS + 0x0050))
-#define DANUBE_MPS_CAD1SR ((volatile u32*)(DANUBE_MPS + 0x0054))
-/* common status 0 and 1 enable register */
-#define DANUBE_MPS_AD0ENR ((volatile u32*)(DANUBE_MPS + 0x0058))
-#define DANUBE_MPS_AD1ENR ((volatile u32*)(DANUBE_MPS + 0x005C))
-/* notification enable register */
-#define DANUBE_MPS_CPU0_NFER ((volatile u32*)(DANUBE_MPS + 0x0060))
-#define DANUBE_MPS_CPU1_NFER ((volatile u32*)(DANUBE_MPS + 0x0064))
-/* CPU to CPU interrup request register */
-#define DANUBE_MPS_CPU0_2_CPU1_IRR ((volatile u32*)(DANUBE_MPS + 0x0070))
-#define DANUBE_MPS_CPU0_2_CPU1_IER ((volatile u32*)(DANUBE_MPS + 0x0074))
-/* Global interrupt request and request enable register */
-#define DANUBE_MPS_GIRR ((volatile u32*)(DANUBE_MPS + 0x0078))
-#define DANUBE_MPS_GIER ((volatile u32*)(DANUBE_MPS + 0x007C))
-
-
-#define DANUBE_MPS_CPU0_SMP0 ((volatile u32*)(DANUBE_MPS + 0x00100))
-
-#define DANUBE_MPS_CPU1_SMP0 ((volatile u32*)(DANUBE_MPS + 0x00200))
-
-/************************************************************************/
-/* Module : DEU register address and bits */
-/************************************************************************/
-#define DANUBE_DEU_BASE_ADDR (0xBE102000)
-/* DEU Control Register */
-#define DANUBE_DEU_CLK ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0000))
-#define DANUBE_DEU_ID ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0008))
-
-/* DEU control register */
-#define DANUBE_DEU_CON ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0010))
-#define DANUBE_DEU_IHR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0014))
-#define DANUBE_DEU_ILR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0018))
-#define DANUBE_DEU_K1HR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x001C))
-#define DANUBE_DEU_K1LR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0020))
-#define DANUBE_DEU_K3HR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0024))
-#define DANUBE_DEU_K3LR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0028))
-#define DANUBE_DEU_IVHR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x002C))
-#define DANUBE_DEU_IVLR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0030))
-#define DANUBE_DEU_OHR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0040))
-#define DANUBE_DEU_OLR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0050))
-
-/* AES DEU register */
-#define DANUBE_AES_CON ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0050))
-#define DANUBE_AES_ID3R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0054))
-#define DANUBE_AES_ID2R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0058))
-#define DANUBE_AES_ID1R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x005C))
-#define DANUBE_AES_ID0R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0060))
-
-/* AES Key register */
-#define DANUBE_AES_K7R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0064))
-#define DANUBE_AES_K6R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0068))
-#define DANUBE_AES_K5R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x006C))
-#define DANUBE_AES_K4R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0070))
-#define DANUBE_AES_K3R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0074))
-#define DANUBE_AES_K2R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0078))
-#define DANUBE_AES_K1R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x007C))
-#define DANUBE_AES_K0R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0080))
-
-/* AES vector register */
-#define DANUBE_AES_IV3R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0084))
-#define DANUBE_AES_IV2R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0088))
-#define DANUBE_AES_IV1R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x008C))
-#define DANUBE_AES_IV0R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0090))
-#define DANUBE_AES_0D3R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0094))
-#define DANUBE_AES_0D2R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x0098))
-#define DANUBE_AES_OD1R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x009C))
-#define DANUBE_AES_OD0R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00A0))
-
-/* hash control registe */
-#define DANUBE_HASH_CON ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00B0))
-#define DANUBE_HASH_MR ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00B4))
-#define DANUBE_HASH_D1R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00B8 ))
-#define DANUBE_HASH_D2R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00BC ))
-#define DANUBE_HASH_D3R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00C0 ))
-#define DANUBE_HASH_D4R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00C4))
-#define DANUBE_HASH_D5R ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00C8))
-
-#define DANUBE_CON ((volatile u32 *)(DANUBE_DEU_BASE_ADDR + 0x00EC))
-
-
-
-
-/************************************************************************/
-/* Module : PPE register address and bits */
-/************************************************************************/
-#define DANUBE_PPE_BASE_ADDR (KSEG1 + 0x1E180000)
-#define DANUBE_PPE_PP32_DEBUG_REG_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x0000) << 2)))
-#define DANUBE_PPE_PPM_INT_REG_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x0030) << 2)))
-#define DANUBE_PPE_PP32_INTERNAL_RES_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x0040) << 2)))
-#define DANUBE_PPE_PPE_CLOCK_CONTROL_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x0100) << 2)))
-#define DANUBE_PPE_CDM_CODE_MEMORY_RAM0_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x1000) << 2)))
-#define DANUBE_PPE_CDM_CODE_MEMORY_RAM1_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x2000) << 2)))
-#define DANUBE_PPE_REG_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x4000) << 2)))
-#define DANUBE_PPE_PP32_DATA_MEMORY_RAM1_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x5000) << 2)))
-#define DANUBE_PPE_PPM_INT_UNIT_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x6000) << 2)))
-#define DANUBE_PPE_PPM_TIMER0_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x6100) << 2)))
-#define DANUBE_PPE_PPM_TASK_IND_REG_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x6200) << 2)))
-#define DANUBE_PPE_PPS_BRK_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x6300) << 2)))
-#define DANUBE_PPE_PPM_TIMER1_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x6400) << 2)))
-#define DANUBE_PPE_SB_RAM0_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x8000) << 2)))
-#define DANUBE_PPE_SB_RAM1_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x8400) << 2)))
-#define DANUBE_PPE_SB_RAM2_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x8C00) << 2)))
-#define DANUBE_PPE_SB_RAM3_ADDR(x) ((volatile u32*)(DANUBE_PPE_BASE_ADDR + (((x) + 0x9600) << 2)))
-
-#define DANUBE_PPE_PP32_SLEEP DANUBE_PPE_REG_ADDR(0x0010) /* PP32 Power Saving Register */
-#define DANUBE_PPE_CDM_CFG DANUBE_PPE_REG_ADDR(0x0100) /* Code/Data Memory (CDM) Register */
-
-/* Mailbox Registers */
-#define DANUBE_PPE_MBOX_IGU0_ISRS DANUBE_PPE_REG_ADDR(0x0200)
-#define DANUBE_PPE_MBOX_IGU0_ISRC DANUBE_PPE_REG_ADDR(0x0201)
-#define DANUBE_PPE_MBOX_IGU0_ISR DANUBE_PPE_REG_ADDR(0x0202)
-#define DANUBE_PPE_MBOX_IGU0_IER DANUBE_PPE_REG_ADDR(0x0203)
-#define DANUBE_PPE_MBOX_IGU1_ISRS0 DANUBE_PPE_REG_ADDR(0x0204)
-#define DANUBE_PPE_MBOX_IGU1_ISRC0 DANUBE_PPE_REG_ADDR(0x0205)
-#define DANUBE_PPE_MBOX_IGU1_ISR0 DANUBE_PPE_REG_ADDR(0x0206)
-#define DANUBE_PPE_MBOX_IGU1_IER0 DANUBE_PPE_REG_ADDR(0x0207)
-#define DANUBE_PPE_MBOX_IGU1_ISRS1 DANUBE_PPE_REG_ADDR(0x0208)
-#define DANUBE_PPE_MBOX_IGU1_ISRC1 DANUBE_PPE_REG_ADDR(0x0209)
-#define DANUBE_PPE_MBOX_IGU1_ISR1 DANUBE_PPE_REG_ADDR(0x020A)
-#define DANUBE_PPE_MBOX_IGU1_IER1 DANUBE_PPE_REG_ADDR(0x020B)
-#define DANUBE_PPE_MBOX_IGU1_ISRS2 DANUBE_PPE_REG_ADDR(0x020C)
-#define DANUBE_PPE_MBOX_IGU1_ISRC2 DANUBE_PPE_REG_ADDR(0x020D)
-#define DANUBE_PPE_MBOX_IGU1_ISR2 DANUBE_PPE_REG_ADDR(0x020E)
-#define DANUBE_PPE_MBOX_IGU1_IER2 DANUBE_PPE_REG_ADDR(0x020F)
-#define DANUBE_PPE_MBOX_IGU2_ISRS DANUBE_PPE_REG_ADDR(0x0210)
-#define DANUBE_PPE_MBOX_IGU2_ISRC DANUBE_PPE_REG_ADDR(0x0211)
-#define DANUBE_PPE_MBOX_IGU2_ISR DANUBE_PPE_REG_ADDR(0x0212)
-#define DANUBE_PPE_MBOX_IGU2_IER DANUBE_PPE_REG_ADDR(0x0213)
-#define DANUBE_PPE_MBOX_IGU3_ISRS DANUBE_PPE_REG_ADDR(0x0214)
-#define DANUBE_PPE_MBOX_IGU3_ISRC DANUBE_PPE_REG_ADDR(0x0215)
-#define DANUBE_PPE_MBOX_IGU3_ISR DANUBE_PPE_REG_ADDR(0x0216)
-#define DANUBE_PPE_MBOX_IGU3_IER DANUBE_PPE_REG_ADDR(0x0217)
-#define DANUBE_PPE_MBOX_IGU4_ISRS DANUBE_PPE_REG_ADDR(0x0218)
-#define DANUBE_PPE_MBOX_IGU4_ISRC DANUBE_PPE_REG_ADDR(0x0219)
-#define DANUBE_PPE_MBOX_IGU4_ISR DANUBE_PPE_REG_ADDR(0x021A)
-#define DANUBE_PPE_MBOX_IGU4_IER DANUBE_PPE_REG_ADDR(0x021B)
-/*
- * Shared Buffer (SB) Registers
- */
-#define DANUBE_PPE_SB_MST_PRI0 DANUBE_PPE_REG_ADDR(0x0300)
-#define DANUBE_PPE_SB_MST_PRI1 DANUBE_PPE_REG_ADDR(0x0301)
-#define DANUBE_PPE_SB_MST_PRI2 DANUBE_PPE_REG_ADDR(0x0302)
-#define DANUBE_PPE_SB_MST_PRI3 DANUBE_PPE_REG_ADDR(0x0303)
-#define DANUBE_PPE_SB_MST_PRI4 DANUBE_PPE_REG_ADDR(0x0304)
-#define DANUBE_PPE_SB_MST_SEL DANUBE_PPE_REG_ADDR(0x0305)
-/*
- * RTHA Registers
- */
-#define DANUBE_PPE_RFBI_CFG DANUBE_PPE_REG_ADDR(0x0400)
-#define DANUBE_PPE_RBA_CFG0 DANUBE_PPE_REG_ADDR(0x0404)
-#define DANUBE_PPE_RBA_CFG1 DANUBE_PPE_REG_ADDR(0x0405)
-#define DANUBE_PPE_RCA_CFG0 DANUBE_PPE_REG_ADDR(0x0408)
-#define DANUBE_PPE_RCA_CFG1 DANUBE_PPE_REG_ADDR(0x0409)
-#define DANUBE_PPE_RDES_CFG0 DANUBE_PPE_REG_ADDR(0x040C)
-#define DANUBE_PPE_RDES_CFG1 DANUBE_PPE_REG_ADDR(0x040D)
-#define DANUBE_PPE_SFSM_STATE0 DANUBE_PPE_REG_ADDR(0x0410)
-#define DANUBE_PPE_SFSM_STATE1 DANUBE_PPE_REG_ADDR(0x0411)
-#define DANUBE_PPE_SFSM_DBA0 DANUBE_PPE_REG_ADDR(0x0412)
-#define DANUBE_PPE_SFSM_DBA1 DANUBE_PPE_REG_ADDR(0x0413)
-#define DANUBE_PPE_SFSM_CBA0 DANUBE_PPE_REG_ADDR(0x0414)
-#define DANUBE_PPE_SFSM_CBA1 DANUBE_PPE_REG_ADDR(0x0415)
-#define DANUBE_PPE_SFSM_CFG0 DANUBE_PPE_REG_ADDR(0x0416)
-#define DANUBE_PPE_SFSM_CFG1 DANUBE_PPE_REG_ADDR(0x0417)
-#define DANUBE_PPE_SFSM_PGCNT0 DANUBE_PPE_REG_ADDR(0x041C)
-#define DANUBE_PPE_SFSM_PGCNT1 DANUBE_PPE_REG_ADDR(0x041D)
-/*
- * TTHA Registers
- */
-#define DANUBE_PPE_FFSM_DBA0 DANUBE_PPE_REG_ADDR(0x0508)
-#define DANUBE_PPE_FFSM_DBA1 DANUBE_PPE_REG_ADDR(0x0509)
-#define DANUBE_PPE_FFSM_CFG0 DANUBE_PPE_REG_ADDR(0x050A)
-#define DANUBE_PPE_FFSM_CFG1 DANUBE_PPE_REG_ADDR(0x050B)
-#define DANUBE_PPE_FFSM_IDLE_HEAD_BC0 DANUBE_PPE_REG_ADDR(0x050E)
-#define DANUBE_PPE_FFSM_IDLE_HEAD_BC1 DANUBE_PPE_REG_ADDR(0x050F)
-#define DANUBE_PPE_FFSM_PGCNT0 DANUBE_PPE_REG_ADDR(0x0514)
-#define DANUBE_PPE_FFSM_PGCNT1 DANUBE_PPE_REG_ADDR(0x0515)
-/*
- * ETOP MDIO Registers
- */
-#define DANUBE_PPE_ETOP_MDIO_CFG DANUBE_PPE_REG_ADDR(0x0600)
-#define DANUBE_PPE_ETOP_MDIO_ACC DANUBE_PPE_REG_ADDR(0x0601)
-#define DANUBE_PPE_ETOP_CFG DANUBE_PPE_REG_ADDR(0x0602)
-#define DANUBE_PPE_ETOP_IG_VLAN_COS DANUBE_PPE_REG_ADDR(0x0603)
-#define DANUBE_PPE_ETOP_IG_DSCP_COS3 DANUBE_PPE_REG_ADDR(0x0604)
-#define DANUBE_PPE_ETOP_IG_DSCP_COS2 DANUBE_PPE_REG_ADDR(0x0605)
-#define DANUBE_PPE_ETOP_IG_DSCP_COS1 DANUBE_PPE_REG_ADDR(0x0606)
-#define DANUBE_PPE_ETOP_IG_DSCP_COS0 DANUBE_PPE_REG_ADDR(0x0607)
-#define DANUBE_PPE_ETOP_IG_PLEN_CTRL0 DANUBE_PPE_REG_ADDR(0x0608)
-#define DANUBE_PPE_ETOP_IG_PLEN_CTRL1 DANUBE_PPE_REG_ADDR(0x0609)
-#define DANUBE_PPE_ETOP_ISR DANUBE_PPE_REG_ADDR(0x060A)
-#define DANUBE_PPE_ETOP_IER DANUBE_PPE_REG_ADDR(0x060B)
-#define DANUBE_PPE_ETOP_VPID DANUBE_PPE_REG_ADDR(0x060C)
-#define DANUBE_PPE_ENET_MAC_CFG DANUBE_PPE_REG_ADDR(0x0610)
-#define DANUBE_PPE_ENETS_DBA DANUBE_PPE_REG_ADDR(0x0612)
-#define DANUBE_PPE_ENETS_CBA DANUBE_PPE_REG_ADDR(0x0613)
-#define DANUBE_PPE_ENETS_CFG DANUBE_PPE_REG_ADDR(0x0614)
-#define DANUBE_PPE_ENETS_PGCNT DANUBE_PPE_REG_ADDR(0x0615)
-#define DANUBE_PPE_ENETS_PGCNT_DSRC_PP32 (0x00020000)
-#define DANUBE_PPE_ENETS_PGCNT_DVAL_SHIFT (9)
-#define DANUBE_PPE_ENETS_PGCNT_DCMD (0x00000100)
-#define DANUBE_PPE_ENETS_PKTCNT DANUBE_PPE_REG_ADDR(0x0616)
-#define DANUBE_PPE_ENETS_PKTCNT_DSRC_PP32 (0x00000200)
-#define DANUBE_PPE_ENETS_PKTCNT_DCMD (0x00000100)
-#define DANUBE_PPE_ENETS_PKTCNT_UPKT (0x000000FF)
-#define DANUBE_PPE_ENETS_BUF_CTRL DANUBE_PPE_REG_ADDR(0x0617)
-#define DANUBE_PPE_ENETS_COS_CFG DANUBE_PPE_REG_ADDR(0x0618)
-#define DANUBE_PPE_ENETS_IGDROP DANUBE_PPE_REG_ADDR(0x0619)
-#define DANUBE_PPE_ENETF_DBA DANUBE_PPE_REG_ADDR(0x0630)
-#define DANUBE_PPE_ENETF_CBA DANUBE_PPE_REG_ADDR(0x0631)
-#define DANUBE_PPE_ENETF_CFG DANUBE_PPE_REG_ADDR(0x0632)
-#define DANUBE_PPE_ENETF_PGCNT DANUBE_PPE_REG_ADDR(0x0633)
-#define DANUBE_PPE_ENETF_PGCNT_ISRC_PP32 (0x00020000)
-#define DANUBE_PPE_ENETF_PGCNT_IVAL_SHIFT (9)
-#define DANUBE_PPE_ENETF_PGCNT_ICMD (0x00000100)
-#define DANUBE_PPE_ENETF_PKTCNT DANUBE_PPE_REG_ADDR(0x0634)
-#define DANUBE_PPE_ENETF_PKTCNT_ISRC_PP32 (0x00000200)
-#define DANUBE_PPE_ENETF_PKTCNT_ICMD (0x00000100)
-#define DANUBE_PPE_ENETF_PKTCNT_VPKT (0x000000FF)
-#define DANUBE_PPE_ENETF_HFCTRL DANUBE_PPE_REG_ADDR(0x0635)
-#define DANUBE_PPE_ENETF_TXCTRL DANUBE_PPE_REG_ADDR(0x0636)
-#define DANUBE_PPE_ENETF_VLCOS0 DANUBE_PPE_REG_ADDR(0x0638)
-#define DANUBE_PPE_ENETF_VLCOS1 DANUBE_PPE_REG_ADDR(0x0639)
-#define DANUBE_PPE_ENETF_VLCOS2 DANUBE_PPE_REG_ADDR(0x063A)
-#define DANUBE_PPE_ENETF_VLCOS3 DANUBE_PPE_REG_ADDR(0x063B)
-#define DANUBE_PPE_ENETF_EGERR DANUBE_PPE_REG_ADDR(0x063C)
-#define DANUBE_PPE_ENETF_EGDROP DANUBE_PPE_REG_ADDR(0x063D)
-/*
- * DPLUS Registers
- */
-#define DANUBE_PPE_DPLUS_TXDB DANUBE_PPE_REG_ADDR(0x0700)
-#define DANUBE_PPE_DPLUS_TXCB DANUBE_PPE_REG_ADDR(0x0701)
-#define DANUBE_PPE_DPLUS_TXCFG DANUBE_PPE_REG_ADDR(0x0702)
-#define DANUBE_PPE_DPLUS_TXPGCNT DANUBE_PPE_REG_ADDR(0x0703)
-#define DANUBE_PPE_DPLUS_RXDB DANUBE_PPE_REG_ADDR(0x0710)
-#define DANUBE_PPE_DPLUS_RXCB DANUBE_PPE_REG_ADDR(0x0711)
-#define DANUBE_PPE_DPLUS_RXCFG DANUBE_PPE_REG_ADDR(0x0712)
-#define DANUBE_PPE_DPLUS_RXPGCNT DANUBE_PPE_REG_ADDR(0x0713)
-/*
- * BMC Registers
- */
-#define DANUBE_PPE_BMC_CMD3 DANUBE_PPE_REG_ADDR(0x0800)
-#define DANUBE_PPE_BMC_CMD2 DANUBE_PPE_REG_ADDR(0x0801)
-#define DANUBE_PPE_BMC_CMD1 DANUBE_PPE_REG_ADDR(0x0802)
-#define DANUBE_PPE_BMC_CMD0 DANUBE_PPE_REG_ADDR(0x0803)
-#define DANUBE_PPE_BMC_CFG0 DANUBE_PPE_REG_ADDR(0x0804)
-#define DANUBE_PPE_BMC_CFG1 DANUBE_PPE_REG_ADDR(0x0805)
-#define DANUBE_PPE_BMC_POLY0 DANUBE_PPE_REG_ADDR(0x0806)
-#define DANUBE_PPE_BMC_POLY1 DANUBE_PPE_REG_ADDR(0x0807)
-#define DANUBE_PPE_BMC_CRC0 DANUBE_PPE_REG_ADDR(0x0808)
-#define DANUBE_PPE_BMC_CRC1 DANUBE_PPE_REG_ADDR(0x0809)
-/*
- * SLL Registers
- */
-#define DANUBE_PPE_SLL_CMD1 DANUBE_PPE_REG_ADDR(0x0900)
-#define DANUBE_PPE_SLL_CMD0 DANUBE_PPE_REG_ADDR(0x0901)
-#define DANUBE_PPE_SLL_KEY0 DANUBE_PPE_REG_ADDR(0x0910)
-#define DANUBE_PPE_SLL_KEY1 DANUBE_PPE_REG_ADDR(0x0911)
-#define DANUBE_PPE_SLL_KEY2 DANUBE_PPE_REG_ADDR(0x0912)
-#define DANUBE_PPE_SLL_KEY3 DANUBE_PPE_REG_ADDR(0x0913)
-#define DANUBE_PPE_SLL_KEY4 DANUBE_PPE_REG_ADDR(0x0914)
-#define DANUBE_PPE_SLL_KEY5 DANUBE_PPE_REG_ADDR(0x0915)
-#define DANUBE_PPE_SLL_RESULT DANUBE_PPE_REG_ADDR(0x0920)
-/*
- * EMA Registers
- */
-#define DANUBE_PPE_EMA_CMD2 DANUBE_PPE_REG_ADDR(0x0A00)
-#define DANUBE_PPE_EMA_CMD1 DANUBE_PPE_REG_ADDR(0x0A01)
-#define DANUBE_PPE_EMA_CMD0 DANUBE_PPE_REG_ADDR(0x0A02)
-#define DANUBE_PPE_EMA_ISR DANUBE_PPE_REG_ADDR(0x0A04)
-#define DANUBE_PPE_EMA_IER DANUBE_PPE_REG_ADDR(0x0A05)
-#define DANUBE_PPE_EMA_CFG DANUBE_PPE_REG_ADDR(0x0A06)
-/*
- * UTPS Registers
- */
-#define DANUBE_PPE_UTP_TXCA0 DANUBE_PPE_REG_ADDR(0x0B00)
-#define DANUBE_PPE_UTP_TXNA0 DANUBE_PPE_REG_ADDR(0x0B01)
-#define DANUBE_PPE_UTP_TXCA1 DANUBE_PPE_REG_ADDR(0x0B02)
-#define DANUBE_PPE_UTP_TXNA1 DANUBE_PPE_REG_ADDR(0x0B03)
-#define DANUBE_PPE_UTP_RXCA0 DANUBE_PPE_REG_ADDR(0x0B10)
-#define DANUBE_PPE_UTP_RXNA0 DANUBE_PPE_REG_ADDR(0x0B11)
-#define DANUBE_PPE_UTP_RXCA1 DANUBE_PPE_REG_ADDR(0x0B12)
-#define DANUBE_PPE_UTP_RXNA1 DANUBE_PPE_REG_ADDR(0x0B13)
-#define DANUBE_PPE_UTP_CFG DANUBE_PPE_REG_ADDR(0x0B20)
-#define DANUBE_PPE_UTP_ISR DANUBE_PPE_REG_ADDR(0x0B30)
-#define DANUBE_PPE_UTP_IER DANUBE_PPE_REG_ADDR(0x0B31)
-/*
- * QSB Registers
- */
-#define DANUBE_PPE_QSB_RELOG DANUBE_PPE_REG_ADDR(0x0C00)
-#define DANUBE_PPE_QSB_EMIT0 DANUBE_PPE_REG_ADDR(0x0C01)
-#define DANUBE_PPE_QSB_EMIT1 DANUBE_PPE_REG_ADDR(0x0C02)
-#define DANUBE_PPE_QSB_ICDV DANUBE_PPE_REG_ADDR(0x0C07)
-#define DANUBE_PPE_QSB_SBL DANUBE_PPE_REG_ADDR(0x0C09)
-#define DANUBE_PPE_QSB_CFG DANUBE_PPE_REG_ADDR(0x0C0A)
-#define DANUBE_PPE_QSB_RTM DANUBE_PPE_REG_ADDR(0x0C0B)
-#define DANUBE_PPE_QSB_RTD DANUBE_PPE_REG_ADDR(0x0C0C)
-#define DANUBE_PPE_QSB_RAMAC DANUBE_PPE_REG_ADDR(0x0C0D)
-#define DANUBE_PPE_QSB_ISTAT DANUBE_PPE_REG_ADDR(0x0C0E)
-#define DANUBE_PPE_QSB_IMR DANUBE_PPE_REG_ADDR(0x0C0F)
-#define DANUBE_PPE_QSB_SRC DANUBE_PPE_REG_ADDR(0x0C10)
-/*
- * DSP User Registers
- */
-#define DANUBE_PPE_DREG_A_VERSION DANUBE_PPE_REG_ADDR(0x0D00)
-#define DANUBE_PPE_DREG_A_CFG DANUBE_PPE_REG_ADDR(0x0D01)
-#define DANUBE_PPE_DREG_AT_CTRL DANUBE_PPE_REG_ADDR(0x0D02)
-#define DANUBE_PPE_DREG_AR_CTRL DANUBE_PPE_REG_ADDR(0x0D08)
-#define DANUBE_PPE_DREG_A_UTPCFG DANUBE_PPE_REG_ADDR(0x0D0E)
-#define DANUBE_PPE_DREG_A_STATUS DANUBE_PPE_REG_ADDR(0x0D0F)
-#define DANUBE_PPE_DREG_AT_CFG0 DANUBE_PPE_REG_ADDR(0x0D20)
-#define DANUBE_PPE_DREG_AT_CFG1 DANUBE_PPE_REG_ADDR(0x0D21)
-#define DANUBE_PPE_DREG_FB_SIZE0 DANUBE_PPE_REG_ADDR(0x0D22)
-#define DANUBE_PPE_DREG_FB_SIZE1 DANUBE_PPE_REG_ADDR(0x0D23)
-#define DANUBE_PPE_DREG_AT_CELL0 DANUBE_PPE_REG_ADDR(0x0D24)
-#define DANUBE_PPE_DREG_AT_CELL1 DANUBE_PPE_REG_ADDR(0x0D25)
-#define DANUBE_PPE_DREG_AT_IDLE_CNT0 DANUBE_PPE_REG_ADDR(0x0D26)
-#define DANUBE_PPE_DREG_AT_IDLE_CNT1 DANUBE_PPE_REG_ADDR(0x0D27)
-#define DANUBE_PPE_DREG_AT_IDLE0 DANUBE_PPE_REG_ADDR(0x0D28)
-#define DANUBE_PPE_DREG_AT_IDLE1 DANUBE_PPE_REG_ADDR(0x0D29)
-#define DANUBE_PPE_DREG_AR_CFG0 DANUBE_PPE_REG_ADDR(0x0D60)
-#define DANUBE_PPE_DREG_AR_CFG1 DANUBE_PPE_REG_ADDR(0x0D61)
-#define DANUBE_PPE_DREG_AR_FB_START0 DANUBE_PPE_REG_ADDR(0x0D62)
-#define DANUBE_PPE_DREG_AR_FB_START1 DANUBE_PPE_REG_ADDR(0x0D63)
-#define DANUBE_PPE_DREG_AR_FB_END0 DANUBE_PPE_REG_ADDR(0x0D64)
-#define DANUBE_PPE_DREG_AR_FB_END1 DANUBE_PPE_REG_ADDR(0x0D65)
-#define DANUBE_PPE_DREG_AR_ATM_STAT0 DANUBE_PPE_REG_ADDR(0x0D66)
-#define DANUBE_PPE_DREG_AR_ATM_STAT1 DANUBE_PPE_REG_ADDR(0x0D67)
-#define DANUBE_PPE_DREG_AR_CELL0 DANUBE_PPE_REG_ADDR(0x0D68)
-#define DANUBE_PPE_DREG_AR_CELL1 DANUBE_PPE_REG_ADDR(0x0D69)
-#define DANUBE_PPE_DREG_AR_IDLE_CNT0 DANUBE_PPE_REG_ADDR(0x0D6A)
-#define DANUBE_PPE_DREG_AR_IDLE_CNT1 DANUBE_PPE_REG_ADDR(0x0D6B)
-#define DANUBE_PPE_DREG_AR_AIIDLE_CNT0 DANUBE_PPE_REG_ADDR(0x0D6C)
-#define DANUBE_PPE_DREG_AR_AIIDLE_CNT1 DANUBE_PPE_REG_ADDR(0x0D6D)
-#define DANUBE_PPE_DREG_AR_BE_CNT0 DANUBE_PPE_REG_ADDR(0x0D6E)
-#define DANUBE_PPE_DREG_AR_BE_CNT1 DANUBE_PPE_REG_ADDR(0x0D6F)
-#define DANUBE_PPE_DREG_AR_HEC_CNT0 DANUBE_PPE_REG_ADDR(0x0D70)
-#define DANUBE_PPE_DREG_AR_HEC_CNT1 DANUBE_PPE_REG_ADDR(0x0D71)
-#define DANUBE_PPE_DREG_AR_CD_CNT0 DANUBE_PPE_REG_ADDR(0x0D72)
-#define DANUBE_PPE_DREG_AR_CD_CNT1 DANUBE_PPE_REG_ADDR(0x0D73)
-#define DANUBE_PPE_DREG_AR_IDLE0 DANUBE_PPE_REG_ADDR(0x0D74)
-#define DANUBE_PPE_DREG_AR_IDLE1 DANUBE_PPE_REG_ADDR(0x0D75)
-#define DANUBE_PPE_DREG_AR_DELIN0 DANUBE_PPE_REG_ADDR(0x0D76)
-#define DANUBE_PPE_DREG_AR_DELIN1 DANUBE_PPE_REG_ADDR(0x0D77)
-#define DANUBE_PPE_DREG_RESV0 DANUBE_PPE_REG_ADDR(0x0D78)
-#define DANUBE_PPE_DREG_RESV1 DANUBE_PPE_REG_ADDR(0x0D79)
-#define DANUBE_PPE_DREG_RX_MIB_CMD0 DANUBE_PPE_REG_ADDR(0x0D80)
-#define DANUBE_PPE_DREG_RX_MIB_CMD1 DANUBE_PPE_REG_ADDR(0x0D81)
-#define DANUBE_PPE_DREG_AR_OVDROP_CNT0 DANUBE_PPE_REG_ADDR(0x0D98)
-#define DANUBE_PPE_DREG_AR_OVDROP_CNT1 DANUBE_PPE_REG_ADDR(0x0D99)
-
-
-/************************************************************************/
-/* Module : PPE register address and bits */
-/************************************************************************/
-#define DANUBE_PPE32_BASE 0xBE180000
-#define DANUBE_PPE32_DEBUG_BREAK_TRACE_REG (DANUBE_PPE32_BASE + (0x0000 * 4))
-#define DANUBE_PPE32_INT_MASK_STATUS_REG (DANUBE_PPE32_BASE + (0x0030 * 4))
-#define DANUBE_PPE32_INT_RESOURCE_REG (DANUBE_PPE32_BASE + (0x0040 * 4))
-#define DANUBE_PPE32_CDM_CODE_MEM_B0 (DANUBE_PPE32_BASE + (0x1000 * 4))
-#define DANUBE_PPE32_CDM_CODE_MEM_B1 (DANUBE_PPE32_BASE + (0x2000 * 4))
-#define DANUBE_PPE32_DATA_MEM_MAP_REG_BASE (DANUBE_PPE32_BASE + (0x4000 * 4))
-
-/************************************************************************/
-/* Module : PPE register address and bits */
-/************************************************************************/
-#define DANUBE_PPE32_BASE 0xBE180000
-#define DANUBE_PPE32_DEBUG_BREAK_TRACE_REG (DANUBE_PPE32_BASE + (0x0000 * 4))
-#define DANUBE_PPE32_INT_MASK_STATUS_REG (DANUBE_PPE32_BASE + (0x0030 * 4))
-#define DANUBE_PPE32_INT_RESOURCE_REG (DANUBE_PPE32_BASE + (0x0040 * 4))
-#define DANUBE_PPE32_CDM_CODE_MEM_B0 (DANUBE_PPE32_BASE + (0x1000 * 4))
-#define DANUBE_PPE32_CDM_CODE_MEM_B1 (DANUBE_PPE32_BASE + (0x2000 * 4))
-#define DANUBE_PPE32_DATA_MEM_MAP_REG_BASE (DANUBE_PPE32_BASE + (0x4000 * 4))
-
-/*
- * ETOP MDIO Registers
- */
-#define ETOP_MDIO_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0600 * 4)))
-#define ETOP_MDIO_ACC ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0601 * 4)))
-#define ETOP_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0602 * 4)))
-#define ETOP_IG_VLAN_COS ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0603 * 4)))
-#define ETOP_IG_DSCP_COS3 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0604 * 4)))
-#define ETOP_IG_DSCP_COS2 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0605 * 4)))
-#define ETOP_IG_DSCP_COS1 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0606 * 4)))
-#define ETOP_IG_DSCP_COS0 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0607 * 4)))
-#define ETOP_IG_PLEN_CTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0608 * 4)))
-#define ETOP_ISR ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060A * 4)))
-#define ETOP_IER ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060B * 4)))
-#define ETOP_VPID ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060C * 4)))
-#define ENET_MAC_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0610 * 4)))
-#define ENETS_DBA ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0612 * 4)))
-#define ENETS_CBA ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0613 * 4)))
-#define ENETS_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0614 * 4)))
-#define ENETS_PGCNT ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0615 * 4)))
-#define ENETS_PKTCNT ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0616 * 4)))
-#define ENETS_BUF_CTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0617 * 4)))
-#define ENETS_COS_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0618 * 4)))
-#define ENETS_IGDROP ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0619 * 4)))
-#define ENETS_IGERR ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x061A * 4)))
-#define ENET_MAC_DA0 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x061B * 4)))
-#define ENET_MAC_DA1 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x061C * 4)))
-
-#define ENETF_DBA ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0630 * 4)))
-#define ENETF_CBA ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0631 * 4)))
-#define ENETF_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0632 * 4)))
-#define ENETF_PGCNT ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0633 * 4)))
-#define ENETF_PKTCNT ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0634 * 4)))
-#define ENETF_HFCTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0635 * 4)))
-#define ENETF_TXCTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0636 * 4)))
-
-#define ENETF_VLCOS0 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0638 * 4)))
-#define ENETF_VLCOS1 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0639 * 4)))
-#define ENETF_VLCOS2 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x063A * 4)))
-#define ENETF_VLCOS3 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x063B * 4)))
-#define ENETF_EGERR ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x063C * 4)))
-#define ENETF_EGDROP ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x063D * 4)))
-
-
-/*
- * ETOP MDIO Registers
- */
-#define DANUBE_PPE32_ETOP_MDIO_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0600 * 4)))
-#define DANUBE_PPE32_ETOP_MDIO_ACC ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0601 * 4)))
-#define DANUBE_PPE32_ETOP_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0602 * 4)))
-#define DANUBE_PPE32_ETOP_IG_VLAN_COS ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0603 * 4)))
-#define DANUBE_PPE32_ETOP_IG_DSCP_COS3 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0604 * 4)))
-#define DANUBE_PPE32_ETOP_IG_DSCP_COS2 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0605 * 4)))
-#define DANUBE_PPE32_ETOP_IG_DSCP_COS1 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0606 * 4)))
-#define DANUBE_PPE32_ETOP_IG_DSCP_COS0 ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0607 * 4)))
-#define DANUBE_PPE32_ETOP_IG_PLEN_CTRL ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0608 * 4)))
-#define DANUBE_PPE32_ETOP_ISR ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060A * 4)))
-#define DANUBE_PPE32_ETOP_IER ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060B * 4)))
-#define DANUBE_PPE32_ETOP_VPID ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x060C * 4)))
-
-
-/* ENET Register */
-#define DANUBE_PPE32_ENET_MAC_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0610 * 4)))
-#define DANUBE_PPE32_ENET_IG_PKTDROP ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0619 * 4)))
-#define DANUBE_PPE32_ENET_CoS_CFG ((volatile u32 *)(DANUBE_PPE32_DATA_MEM_MAP_REG_BASE + (0x0618 * 4)))
-
-/*********LED register definition****************/
-
-#define DANUBE_LED 0xBE100BB0
-#define DANUBE_LED_CON0 ((volatile u32*)(DANUBE_LED + 0x0000))
-#define DANUBE_LED_CON1 ((volatile u32*)(DANUBE_LED + 0x0004))
-#define DANUBE_LED_CPU0 ((volatile u32*)(DANUBE_LED + 0x0008))
-#define DANUBE_LED_CPU1 ((volatile u32*)(DANUBE_LED + 0x000C))
-#define DANUBE_LED_AR ((volatile u32*)(DANUBE_LED + 0x0010))
-
-
-
-
-/***********************************************************************/
-#define DANUBE_REG32(addr) *((volatile u32 *)(addr))
-/***********************************************************************/
-#endif //DANUBE_H
+++ /dev/null
-/*****************************************************************************
- * DANUBE BootROM
- * Copyright (c) 2005, Infineon Technologies AG, All rights reserved
- * IFAP DC COM SD
- *****************************************************************************/
-#ifndef __ASC_H
-#define __ASC_H
-
-#define DANUBEASC_TXFIFO_FL 1
-#define DANUBEASC_RXFIFO_FL 1
-#define DANUBEASC_TXFIFO_FULL 16
-
-/* channel operating modes */
-#define ASCOPT_CSIZE 0x00000003
-#define ASCOPT_CS7 0x00000001
-#define ASCOPT_CS8 0x00000002
-#define ASCOPT_PARENB 0x00000004
-#define ASCOPT_STOPB 0x00000008
-#define ASCOPT_PARODD 0x00000010
-#define ASCOPT_CREAD 0x00000020
-
-#define ASC_OPTIONS (ASCOPT_CREAD | ASCOPT_CS8)
-
-/* ASC input select (0 or 1) */
-#define CONSOLE_TTY 0
-
-#define DANUBEASC_TXFIFO_FL 1
-#define DANUBEASC_RXFIFO_FL 1
-#define DANUBEASC_TXFIFO_FULL 16
-
-/* interrupt lines masks for the ASC device interrupts*/
-/* change these macroses if it's necessary */
-#define DANUBEASC_IRQ_LINE_ALL 0x0000007f /* all IRQs */
-
-#define DANUBEASC_IRQ_LINE_TIR 0x00000001 /* Tx Int */
-#define DANUBEASC_IRQ_LINE_TBIR 0x00000002 /* Tx Buffer Int */
-#define DANUBEASC_IRQ_LINE_RIR 0x00000004 /* Rx Int */
-#define DANUBEASC_IRQ_LINE_EIR 0x00000008 /* Error Int */
-#define DANUBEASC_IRQ_LINE_ABSTIR 0x00000010 /* Autobaud Start Int */
-#define DANUBEASC_IRQ_LINE_ABDETIP 0x00000020 /* Autobaud Detection Int */
-#define DANUBEASC_IRQ_LINE_SFCIR 0x00000040 /* Software Flow Control Int */
-
-/* interrupt controller access macros */
-#define ASC_INTERRUPTS_ENABLE(X) \
-*((volatile unsigned int*) DANUBE_ICU_IM0_IER) |= X;
-#define ASC_INTERRUPTS_DISABLE(X) \
-*((volatile unsigned int*) DANUBE_ICU_IM0_IER) &= ~X;
-#define ASC_INTERRUPTS_CLEAR(X) \
-*((volatile unsigned int*) DANUBE_ICU_IM0_ISR) = X;
-
-/* CLC register's bits and bitfields */
-#define ASCCLC_DISR 0x00000001
-#define ASCCLC_DISS 0x00000002
-#define ASCCLC_RMCMASK 0x0000FF00
-#define ASCCLC_RMCOFFSET 8
-
-/* CON register's bits and bitfields */
-#define ASCCON_MODEMASK 0x0000000f
-#define ASCCON_M_8ASYNC 0x0
-#define ASCCON_M_8IRDA 0x1
-#define ASCCON_M_7ASYNC 0x2
-#define ASCCON_M_7IRDA 0x3
-#define ASCCON_WLSMASK 0x0000000c
-#define ASCCON_WLSOFFSET 2
-#define ASCCON_WLS_8BIT 0x0
-#define ASCCON_WLS_7BIT 0x1
-#define ASCCON_PEN 0x00000010
-#define ASCCON_ODD 0x00000020
-#define ASCCON_SP 0x00000040
-#define ASCCON_STP 0x00000080
-#define ASCCON_BRS 0x00000100
-#define ASCCON_FDE 0x00000200
-#define ASCCON_ERRCLK 0x00000400
-#define ASCCON_EMMASK 0x00001800
-#define ASCCON_EMOFFSET 11
-#define ASCCON_EM_ECHO_OFF 0x0
-#define ASCCON_EM_ECHO_AB 0x1
-#define ASCCON_EM_ECHO_ON 0x2
-#define ASCCON_LB 0x00002000
-#define ASCCON_ACO 0x00004000
-#define ASCCON_R 0x00008000
-#define ASCCON_PAL 0x00010000
-#define ASCCON_FEN 0x00020000
-#define ASCCON_RUEN 0x00040000
-#define ASCCON_ROEN 0x00080000
-#define ASCCON_TOEN 0x00100000
-#define ASCCON_BEN 0x00200000
-#define ASCCON_TXINV 0x01000000
-#define ASCCON_RXINV 0x02000000
-#define ASCCON_TXMSB 0x04000000
-#define ASCCON_RXMSB 0x08000000
-
-/* STATE register's bits and bitfields */
-#define ASCSTATE_REN 0x00000001
-#define ASCSTATE_PE 0x00010000
-#define ASCSTATE_FE 0x00020000
-#define ASCSTATE_RUE 0x00040000
-#define ASCSTATE_ROE 0x00080000
-#define ASCSTATE_TOE 0x00100000
-#define ASCSTATE_BE 0x00200000
-#define ASCSTATE_TXBVMASK 0x07000000
-#define ASCSTATE_TXBVOFFSET 24
-#define ASCSTATE_TXEOM 0x08000000
-#define ASCSTATE_RXBVMASK 0x70000000
-#define ASCSTATE_RXBVOFFSET 28
-#define ASCSTATE_RXEOM 0x80000000
-
-/* WHBSTATE register's bits and bitfields */
-#define ASCWHBSTATE_CLRREN 0x00000001
-#define ASCWHBSTATE_SETREN 0x00000002
-#define ASCWHBSTATE_CLRPE 0x00000004
-#define ASCWHBSTATE_CLRFE 0x00000008
-#define ASCWHBSTATE_CLRRUE 0x00000010
-#define ASCWHBSTATE_CLRROE 0x00000020
-#define ASCWHBSTATE_CLRTOE 0x00000040
-#define ASCWHBSTATE_CLRBE 0x00000080
-#define ASCWHBSTATE_SETPE 0x00000100
-#define ASCWHBSTATE_SETFE 0x00000200
-#define ASCWHBSTATE_SETRUE 0x00000400
-#define ASCWHBSTATE_SETROE 0x00000800
-#define ASCWHBSTATE_SETTOE 0x00001000
-#define ASCWHBSTATE_SETBE 0x00002000
-
-/* ABCON register's bits and bitfields */
-#define ASCABCON_ABEN 0x0001
-#define ASCABCON_AUREN 0x0002
-#define ASCABCON_ABSTEN 0x0004
-#define ASCABCON_ABDETEN 0x0008
-#define ASCABCON_FCDETEN 0x0010
-
-/* FDV register mask, offset and bitfields*/
-#define ASCFDV_VALUE_MASK 0x000001FF
-
-/* WHBABCON register's bits and bitfields */
-#define ASCWHBABCON_CLRABEN 0x0001
-#define ASCWHBABCON_SETABEN 0x0002
-
-/* ABSTAT register's bits and bitfields */
-#define ASCABSTAT_FCSDET 0x0001
-#define ASCABSTAT_FCCDET 0x0002
-#define ASCABSTAT_SCSDET 0x0004
-#define ASCABSTAT_SCCDET 0x0008
-#define ASCABSTAT_DETWAIT 0x0010
-
-/* WHBABSTAT register's bits and bitfields */
-#define ASCWHBABSTAT_CLRFCSDET 0x0001
-#define ASCWHBABSTAT_SETFCSDET 0x0002
-#define ASCWHBABSTAT_CLRFCCDET 0x0004
-#define ASCWHBABSTAT_SETFCCDET 0x0008
-#define ASCWHBABSTAT_CLRSCSDET 0x0010
-#define ASCWHBABSTAT_SETSCSDET 0x0020
-#define ASCWHBABSTAT_CLRSCCDET 0x0040
-#define ASCWHBABSTAT_SETSCCDET 0x0080
-#define ASCWHBABSTAT_CLRDETWAIT 0x0100
-#define ASCWHBABSTAT_SETDETWAIT 0x0200
-
-/* TXFCON register's bits and bitfields */
-#define ASCTXFCON_TXFIFO1 0x00000400
-#define ASCTXFCON_TXFEN 0x0001
-#define ASCTXFCON_TXFFLU 0x0002
-#define ASCTXFCON_TXFITLMASK 0x3F00
-#define ASCTXFCON_TXFITLOFF 8
-
-/* RXFCON register's bits and bitfields */
-#define ASCRXFCON_RXFIFO1 0x00000400
-#define ASCRXFCON_RXFEN 0x0001
-#define ASCRXFCON_RXFFLU 0x0002
-#define ASCRXFCON_RXFITLMASK 0x3F00
-#define ASCRXFCON_RXFITLOFF 8
-
-/* FSTAT register's bits and bitfields */
-#define ASCFSTAT_RXFFLMASK 0x003F
-#define ASCFSTAT_TXFFLMASK 0x3F00
-#define ASCFSTAT_TXFFLOFF 8
-
-typedef struct /* DanubeAsc_t */
-{
- volatile unsigned long asc_clc; /*0x0000*/
- volatile unsigned long asc_pisel; /*0x0004*/
- volatile unsigned long asc_id; /*0x0008*/
- volatile unsigned long asc_rsvd1[1]; /* for mapping */ /*0x000C*/
- volatile unsigned long asc_con; /*0x0010*/
- volatile unsigned long asc_state; /*0x0014*/
- volatile unsigned long asc_whbstate; /*0x0018*/
- volatile unsigned long asc_rsvd2[1]; /* for mapping */ /*0x001C*/
- volatile unsigned long asc_tbuf; /*0x0020*/
- volatile unsigned long asc_rbuf; /*0x0024*/
- volatile unsigned long asc_rsvd3[2]; /* for mapping */ /*0x0028*/
- volatile unsigned long asc_abcon; /*0x0030*/
- volatile unsigned long asc_abstat; /* not used */ /*0x0034*/
- volatile unsigned long asc_whbabcon; /*0x0038*/
- volatile unsigned long asc_whbabstat; /* not used */ /*0x003C*/
- volatile unsigned long asc_rxfcon; /*0x0040*/
- volatile unsigned long asc_txfcon; /*0x0044*/
- volatile unsigned long asc_fstat; /*0x0048*/
- volatile unsigned long asc_rsvd4[1]; /* for mapping */ /*0x004C*/
- volatile unsigned long asc_bg; /*0x0050*/
- volatile unsigned long asc_bg_timer; /*0x0054*/
- volatile unsigned long asc_fdv; /*0x0058*/
- volatile unsigned long asc_pmw; /*0x005C*/
- volatile unsigned long asc_modcon; /*0x0060*/
- volatile unsigned long asc_modstat; /*0x0064*/
- volatile unsigned long asc_rsvd5[2]; /* for mapping */ /*0x0068*/
- volatile unsigned long asc_sfcc; /*0x0070*/
- volatile unsigned long asc_rsvd6[3]; /* for mapping */ /*0x0074*/
- volatile unsigned long asc_eomcon; /*0x0080*/
- volatile unsigned long asc_rsvd7[26]; /* for mapping */ /*0x0084*/
- volatile unsigned long asc_dmacon; /*0x00EC*/
- volatile unsigned long asc_rsvd8[1]; /* for mapping */ /*0x00F0*/
- volatile unsigned long asc_irnen; /*0x00F4*/
- volatile unsigned long asc_irnicr; /*0x00F8*/
- volatile unsigned long asc_irncr; /*0x00FC*/
-} DanubeAsc_t;
-
-int asc_init (void);
-void asc_puts (const char *s);
-void asc_putc (const char c);
-int asc_getc (void);
-
-#endif /* __ASC_H */
+++ /dev/null
-/************************************************************************
- *
- * Copyright (c) 2005
- * Infineon Technologies AG
- * St. Martin Strasse 53; 81669 Muenchen; Germany
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License
- * as published by the Free Software Foundation; either version
- * 2 of the License, or (at your option) any later version.
- *
- ************************************************************************/
-
-/***********************************************************************/
-/* Module : DMA register address and bits */
-/***********************************************************************/
-
-#define INCA_IP2_DMA (KSEG1+0x14101000)
-/***********************************************************************/
-#define CONFIGURATION_REGISTERS_CLC (INCA_IP2_DMA + 0x00)
-#define CONFIGURATION_REGISTERS_ID (INCA_IP2_DMA + 0x08)
-#define GENERAL_REGISTERS_DMA_CTRL (INCA_IP2_DMA + 0x10)
-#define CHANNEL_RELATED_REGISTERS_DMA_CS (INCA_IP2_DMA + 0x18)
-#define CHANNEL_RELATED_REGISTERS_DMA_CCTRL (INCA_IP2_DMA + 0x1C)
-#define CHANNEL_RELATED_REGISTERS_DMA_CDBA (INCA_IP2_DMA + 0x20)
-#define CHANNEL_RELATED_REGISTERS_DMA_CDLEN (INCA_IP2_DMA + 0x24)
-#define CHANNEL_RELATED_REGISTERS_DMA_CIE (INCA_IP2_DMA + 0x2C)
-#define CHANNEL_RELATED_REGISTERS_DMA_CIS (INCA_IP2_DMA + 0x28)
-#define CHANNEL_RELATED_REGISTERS_DMA_CPOLL (INCA_IP2_DMA + 0x14)
-
-#define PORT_RELATED_REGISTERS_DMA_PS (INCA_IP2_DMA + 0x40)
-#define PORT_RELATED_REGISTERS_DMA_PCTRL (INCA_IP2_DMA + 0x44)
-
-#define INTERRUPT_NODE_REGISTERS_DMA_IRNEN (INCA_IP2_DMA + 0xF4)
-#define INTERRUPT_NODE_REGISTERS_DMA_IRNCR (INCA_IP2_DMA + 0xF8)
-#define INTERRUPT_NODE_REGISTERS_DMA_IRNICR (INCA_IP2_DMA + 0xFC)
-
-#if 0
-/* ISR */
-#define DMA_ISR_RDERR 0x20
-#define DMA_ISR_CMDCPT 0x10
-#define DMA_ISR_CPT 0x8
-#define DMA_ISR_DURR 0x4
-#define DMA_ISR_EOP 0x2
-#endif
-#define DMA_RESET_CHANNEL 0x00000002
-#define DMA_ENABLE_CHANNEL 0x00000001
-#define DMA_DESC_BYTEOFF_SHIFT 22
-
-#define DMA_POLLING_ENABLE 0x80000000
-#define DMA_POLLING_CNT 0x50 /*minimum 0x10, max 0xfff0*/
-
-/***********************************************************************/
-/* Module : ICU register address and bits */
-/***********************************************************************/
-
-#define INCA_IP2_ICU (KSEG1+0x1F880200)
-/***********************************************************************/
-
-#define INCA_IP2_ICU_IM0_ISR ((volatile u32*)(INCA_IP2_ICU + 0x0000))
-#define INCA_IP2_ICU_IM0_IER ((volatile u32*)(INCA_IP2_ICU + 0x0008))
-#define INCA_IP2_ICU_IM0_IOSR ((volatile u32*)(INCA_IP2_ICU + 0x0010))
-#define INCA_IP2_ICU_IM0_IRSR ((volatile u32*)(INCA_IP2_ICU + 0x0018))
-#define INCA_IP2_ICU_IM0_IMR ((volatile u32*)(INCA_IP2_ICU + 0x0020))
-#define INCA_IP2_ICU_IM0_IMR_IID (1 << 31)
-#define INCA_IP2_ICU_IM0_IMR_IN_GET(value) (((value) >> 0) & ((1 << 5) - 1))
-#define INCA_IP2_ICU_IM0_IMR_IN_SET(value) (((( 1 << 5) - 1) & (value)) << 0)
-#define INCA_IP2_ICU_IM0_IR(value) (1 << (value))
-
-#define INCA_IP2_ICU_IM1_ISR ((volatile u32*)(INCA_IP2_ICU + 0x0028))
-#define INCA_IP2_ICU_IM1_IER ((volatile u32*)(INCA_IP2_ICU + 0x0030))
-#define INCA_IP2_ICU_IM1_IOSR ((volatile u32*)(INCA_IP2_ICU + 0x0038))
-#define INCA_IP2_ICU_IM1_IRSR ((volatile u32*)(INCA_IP2_ICU + 0x0040))
-#define INCA_IP2_ICU_IM1_IMR ((volatile u32*)(INCA_IP2_ICU + 0x0048))
-#define INCA_IP2_ICU_IM1_IMR_IID (1 << 31)
-#define INCA_IP2_ICU_IM1_IMR_IN_GET(value) (((value) >> 0) & ((1 << 5) - 1))
-#define INCA_IP2_ICU_IM1_IMR_IN_SET(value) (((( 1 << 5) - 1) & (value)) << 0)
-#define INCA_IP2_ICU_IM1_IR(value) (1 << (value))
-
-#define INCA_IP2_ICU_IM2_ISR ((volatile u32*)(INCA_IP2_ICU + 0x0050))
-#define INCA_IP2_ICU_IM2_IER ((volatile u32*)(INCA_IP2_ICU + 0x0058))
-#define INCA_IP2_ICU_IM2_IOSR ((volatile u32*)(INCA_IP2_ICU + 0x0060))
-#define INCA_IP2_ICU_IM2_IRSR ((volatile u32*)(INCA_IP2_ICU + 0x0068))
-#define INCA_IP2_ICU_IM2_IMR ((volatile u32*)(INCA_IP2_ICU + 0x0070))
-#define INCA_IP2_ICU_IM2_IMR_IID (1 << 31)
-#define INCA_IP2_ICU_IM2_IMR_IN_GET(value) (((value) >> 0) & ((1 << 5) - 1))
-#define INCA_IP2_ICU_IM2_IMR_IN_SET(value) (((( 1 << 5) - 1) & (value)) << 0)
-#define INCA_IP2_ICU_IM2_IR(value) (1 << (value))
-
-#define INCA_IP2_ICU_IM3_ISR ((volatile u32*)(INCA_IP2_ICU + 0x0078))
-#define INCA_IP2_ICU_IM3_IER ((volatile u32*)(INCA_IP2_ICU + 0x0080))
-#define INCA_IP2_ICU_IM3_IOSR ((volatile u32*)(INCA_IP2_ICU + 0x0088))
-#define INCA_IP2_ICU_IM3_IRSR ((volatile u32*)(INCA_IP2_ICU + 0x0090))
-#define INCA_IP2_ICU_IM3_IMR ((volatile u32*)(INCA_IP2_ICU + 0x0098))
-#define INCA_IP2_ICU_IM3_IMR_IID (1 << 31)
-#define INCA_IP2_ICU_IM3_IMR_IN_GET(value) (((value) >> 0) & ((1 << 5) - 1))
-#define INCA_IP2_ICU_IM3_IMR_IN_SET(value) (((( 1 << 5) - 1) & (value)) << 0)
-#define INCA_IP2_ICU_IM3_IR(value) (1 << (value))
-
-#define INCA_IP2_ICU_IM4_ISR ((volatile u32*)(INCA_IP2_ICU + 0x00A0))
-#define INCA_IP2_ICU_IM4_IER ((volatile u32*)(INCA_IP2_ICU + 0x00A8))
-#define INCA_IP2_ICU_IM4_IOSR ((volatile u32*)(INCA_IP2_ICU + 0x00B0))
-#define INCA_IP2_ICU_IM4_IRSR ((volatile u32*)(INCA_IP2_ICU + 0x00B8))
-#define INCA_IP2_ICU_IM4_IMR ((volatile u32*)(INCA_IP2_ICU + 0x00C0))
-#define INCA_IP2_ICU_IM4_IMR_IID (1 << 31)
-#define INCA_IP2_ICU_IM4_IMR_IN_GET(value) (((value) >> 0) & ((1 << 5) - 1))
-#define INCA_IP2_ICU_IM4_IMR_IN_SET(value) (((( 1 << 5) - 1) & (value)) << 0)
-#define INCA_IP2_ICU_IM4_IR(value) (1 << (value))
-
-#define INCA_IP2_ICU_IM5_ISR ((volatile u32*)(INCA_IP2_ICU + 0x00C8))
-#define INCA_IP2_ICU_IM5_IER ((volatile u32*)(INCA_IP2_ICU + 0x00D0))
-#define INCA_IP2_ICU_IM5_IOSR ((volatile u32*)(INCA_IP2_ICU + 0x00D8))
-#define INCA_IP2_ICU_IM5_IRSR ((volatile u32*)(INCA_IP2_ICU + 0x00E0))
-#define INCA_IP2_ICU_IM5_IMR ((volatile u32*)(INCA_IP2_ICU + 0x00E8))
-#define INCA_IP2_ICU_IM5_IMR_IID (1 << 31)
-#define INCA_IP2_ICU_IM5_IMR_IN_GET(value) (((value) >> 0) & ((1 << 5) - 1))
-#define INCA_IP2_ICU_IM5_IMR_IN_SET(value) (((( 1 << 5) - 1) & (value)) << 0)
-#define INCA_IP2_ICU_IM5_IR(value) (1 << (value))
-
-
-/***********************************************************************/
-/* Module : CGU register address and bits */
-/***********************************************************************/
-
-#define INCA_IP2_CGU (KSEG1+0x1F100800)
-/***********************************************************************/
-
-#define INCA_IP2_CGU_PLL2CR ((volatile u32*)(INCA_IP2_CGU + 0x0008))
-#define INCA_IP2_CGU_FBSCR ((volatile u32*)(INCA_IP2_CGU + 0x0018))
-#define INCA_IP2_CGU_FBSCR_LPBSDIV_GET(value) (((value) >> 6) & ((1 << 2) - 1))
-#define INCA_IP2_CGU_FBSCR_DIV0_GET(value) (((value) >> 0) & ((1 << 3) - 1))
-#define INCA_IP2_CGU_FBSCR_DIV1_GET(value) (((value) >> 4) & ((1 << 2) - 1))
-
-/***********************************************************************/
-/* Module : MPS register address and bits */
-/***********************************************************************/
-
-#define INCA_IP2_MPS (KSEG1+0x1F101400)
-/***********************************************************************/
-
-#define INCA_IP2_MPS_CHIPID ((volatile u32*)(INCA_IP2_MPS + 0x0344))
-#define INCA_IP2_MPS_CHIPID_VERSION_GET(value) (((value) >> 28) & ((1 << 4) - 1))
-#define INCA_IP2_MPS_CHIPID_VERSION_SET(value) (((( 1 << 4) - 1) & (value)) << 28)
-#define INCA_IP2_MPS_CHIPID_PARTNUM_GET(value) (((value) >> 12) & ((1 << 16) - 1))
-#define INCA_IP2_MPS_CHIPID_PARTNUM_SET(value) (((( 1 << 16) - 1) & (value)) << 12)
-#define INCA_IP2_MPS_CHIPID_MANID_GET(value) (((value) >> 1) & ((1 << 10) - 1))
-#define INCA_IP2_MPS_CHIPID_MANID_SET(value) (((( 1 << 10) - 1) & (value)) << 1)
-
-
-/* voice channel 0 ... 3 interrupt enable register */
-#define INCA_IP2_MPS_VC0ENR ((volatile u32*)(INCA_IP2_MPS + 0x0000))
-#define INCA_IP2_MPS_VC1ENR ((volatile u32*)(INCA_IP2_MPS + 0x0004))
-#define INCA_IP2_MPS_VC2ENR ((volatile u32*)(INCA_IP2_MPS + 0x0008))
-#define INCA_IP2_MPS_VC3ENR ((volatile u32*)(INCA_IP2_MPS + 0x000C))
-/* voice channel 0 ... 3 interrupt status read register */
-#define INCA_IP2_MPS_RVC0SR ((volatile u32*)(INCA_IP2_MPS + 0x0010))
-#define INCA_IP2_MPS_RVC1SR ((volatile u32*)(INCA_IP2_MPS + 0x0014))
-#define INCA_IP2_MPS_RVC2SR ((volatile u32*)(INCA_IP2_MPS + 0x0018))
-#define INCA_IP2_MPS_RVC3SR ((volatile u32*)(INCA_IP2_MPS + 0x001C))
-/* voice channel 0 ... 3 interrupt status set register */
-#define INCA_IP2_MPS_SVC0SR ((volatile u32*)(INCA_IP2_MPS + 0x0020))
-#define INCA_IP2_MPS_SVC1SR ((volatile u32*)(INCA_IP2_MPS + 0x0024))
-#define INCA_IP2_MPS_SVC2SR ((volatile u32*)(INCA_IP2_MPS + 0x0028))
-#define INCA_IP2_MPS_SVC3SR ((volatile u32*)(INCA_IP2_MPS + 0x002C))
-/* voice channel 0 ... 3 interrupt status clear register */
-#define INCA_IP2_MPS_CVC0SR ((volatile u32*)(INCA_IP2_MPS + 0x0030))
-#define INCA_IP2_MPS_CVC1SR ((volatile u32*)(INCA_IP2_MPS + 0x0034))
-#define INCA_IP2_MPS_CVC2SR ((volatile u32*)(INCA_IP2_MPS + 0x0038))
-#define INCA_IP2_MPS_CVC3SR ((volatile u32*)(INCA_IP2_MPS + 0x003C))
-/* common status 0 and 1 read register */
-#define INCA_IP2_MPS_RAD0SR ((volatile u32*)(INCA_IP2_MPS + 0x0040))
-#define INCA_IP2_MPS_RAD1SR ((volatile u32*)(INCA_IP2_MPS + 0x0044))
-/* common status 0 and 1 set register */
-#define INCA_IP2_MPS_SAD0SR ((volatile u32*)(INCA_IP2_MPS + 0x0048))
-#define INCA_IP2_MPS_SAD1SR ((volatile u32*)(INCA_IP2_MPS + 0x004C))
-/* common status 0 and 1 clear register */
-#define INCA_IP2_MPS_CAD0SR ((volatile u32*)(INCA_IP2_MPS + 0x0050))
-#define INCA_IP2_MPS_CAD1SR ((volatile u32*)(INCA_IP2_MPS + 0x0054))
-/* notification enable register */
-#define INCA_IP2_MPS_CPU0_NFER ((volatile u32*)(INCA_IP2_MPS + 0x0060))
-#define INCA_IP2_MPS_CPU1_NFER ((volatile u32*)(INCA_IP2_MPS + 0x0064))
-/* CPU to CPU interrup request register */
-#define INCA_IP2_MPS_CPU0_2_CPU1_IRR ((volatile u32*)(INCA_IP2_MPS + 0x0070))
-#define INCA_IP2_MPS_CPU0_2_CPU1_IER ((volatile u32*)(INCA_IP2_MPS + 0x0074))
-/* Global interrupt request and request enable register */
-#define INCA_IP2_MPS_GIRR ((volatile u32*)(INCA_IP2_MPS + 0x0078))
-#define INCA_IP2_MPS_GIER ((volatile u32*)(INCA_IP2_MPS + 0x007C))
-
-/* Addresses of enable registers not yet defined
-#define INCA_IP2_MPS_AD0ENR ((volatile u32*)(INCA_IP2_MPS + 0x????))
-#define INCA_IP2_MPS_AD1ENR ((volatile u32*)(INCA_IP2_MPS + 0x????))
-*/
-
-
-/***********************************************************************/
-/* Module : ASC0 register address and bits */
-/***********************************************************************/
-
-#define INCA_IP2_ASC0 (KSEG1+0x1E000400)
-/***********************************************************************/
-
-#define INCA_IP2_ASC0_TBUF ((volatile u32*)(INCA_IP2_ASC0 + 0x0020))
-#define INCA_IP2_ASC0_RBUF ((volatile u32*)(INCA_IP2_ASC0 + 0x0024))
-#define INCA_IP2_ASC0_FSTAT ((volatile u32*)(INCA_IP2_ASC0 + 0x0048))
-#define INCA_IP2_ASC0_FSTAT_TXFREE_GET(value) (((value) >> 24) & ((1 << 6) - 1))
-#define INCA_IP2_ASC0_FSTAT_TXFREE_SET(value) (((( 1 << 6) - 1) & (value)) << 24)
-#define INCA_IP2_ASC0_FSTAT_RXFREE_GET(value) (((value) >> 16) & ((1 << 6) - 1))
-#define INCA_IP2_ASC0_FSTAT_RXFREE_SET(value) (((( 1 << 6) - 1) & (value)) << 16)
-#define INCA_IP2_ASC0_FSTAT_TXFFL_GET(value) (((value) >> 8) & ((1 << 6) - 1))
-#define INCA_IP2_ASC0_FSTAT_TXFFL_SET(value) (((( 1 << 6) - 1) & (value)) << 8)
-#define INCA_IP2_ASC0_FSTAT_RXFFL_GET(value) (((value) >> 0) & ((1 << 6) - 1))
-#define INCA_IP2_ASC0_FSTAT_RXFFL_SET(value) (((( 1 << 6) - 1) & (value)) << 0)
-
-
-/***********************************************************************/
-/* Module : ASC1 register address and bits */
-/***********************************************************************/
-
-#define INCA_IP2_ASC1 (KSEG1+0x1E000800)
-/***********************************************************************/
-
-#define INCA_IP2_ASC1_TBUF ((volatile u32*)(INCA_IP2_ASC1 + 0x0020))
-#define INCA_IP2_ASC1_RBUF ((volatile u32*)(INCA_IP2_ASC1 + 0x0024))
-#define INCA_IP2_ASC1_FSTAT ((volatile u32*)(INCA_IP2_ASC1 + 0x0048))
-#define INCA_IP2_ASC1_FSTAT_TXFREE_GET(value) (((value) >> 24) & ((1 << 6) - 1))
-#define INCA_IP2_ASC1_FSTAT_TXFREE_SET(value) (((( 1 << 6) - 1) & (value)) << 24)
-#define INCA_IP2_ASC1_FSTAT_RXFREE_GET(value) (((value) >> 16) & ((1 << 6) - 1))
-#define INCA_IP2_ASC1_FSTAT_RXFREE_SET(value) (((( 1 << 6) - 1) & (value)) << 16)
-#define INCA_IP2_ASC1_FSTAT_TXFFL_GET(value) (((value) >> 8) & ((1 << 6) - 1))
-#define INCA_IP2_ASC1_FSTAT_TXFFL_SET(value) (((( 1 << 6) - 1) & (value)) << 8)
-#define INCA_IP2_ASC1_FSTAT_RXFFL_GET(value) (((value) >> 0) & ((1 << 6) - 1))
-#define INCA_IP2_ASC1_FSTAT_RXFFL_SET(value) (((( 1 << 6) - 1) & (value)) << 0)
-
-
-/***********************************************************************/
-/* Module : RCU register address and bits */
-/***********************************************************************/
-
-#define INCA_IP2_RCU (KSEG1+0x1E001C00)
-/***********************************************************************/
-
-/***Reset Request Register***/
-#define INCA_IP2_RCU_RST_REQ ((volatile u32*)(INCA_IP2_RCU + 0x0000))
-#define INCA_IP2_RCU_RST_REQ_CPU0 (1 << 31)
-#define INCA_IP2_RCU_RST_REQ_CPU1 (1 << 30)
-#define INCA_IP2_RCU_RST_REQ_CPUSUB (1 << 29)
-#define INCA_IP2_RCU_RST_REQ_HRST (1 << 28)
-#define INCA_IP2_RCU_RST_REQ_WDT0 (1 << 27)
-#define INCA_IP2_RCU_RST_REQ_WDT1 (1 << 26)
-#define INCA_IP2_RCU_RST_REQ_CFG_GET(value) (((value) >> 23) & ((1 << 3) - 1))
-#define INCA_IP2_RCU_RST_REQ_CFG_SET(value) (((( 1 << 3) - 1) & (value)) << 23)
-#define INCA_IP2_RCU_RST_REQ_SWTBOOT (1 << 22)
-#define INCA_IP2_RCU_RST_REQ_DMA (1 << 21)
-#define INCA_IP2_RCU_RST_REQ_ETHPHY1 (1 << 20)
-#define INCA_IP2_RCU_RST_REQ_ETHPHY0 (1 << 19)
-#define INCA_IP2_RCU_RST_REQ_CPU0_BR (1 << 18)
-
-/* CPU0, CPU1, CPUSUB, HRST, WDT0, WDT1, DMA, ETHPHY1, ETHPHY0 */
-#define INCA_IP2_RCU_RST_REQ_ALL 0xFC380000
-
-/***NMI Status Register***/
-#define INCA_IP2_RCU_NMISR ((volatile u32*)(INCA_IP2_RCU + 0x00F4))
-#define INCA_IP2_RCU_NMISR_NMIEXT (1 << 2)
-#define INCA_IP2_RCU_NMISR_NMIPLL2 (1 << 1)
-#define INCA_IP2_RCU_NMISR_NMIPLL1 (1 << 0)
-
-
-/***********************************************************************/
-/* Module : WDT register address and bits */
-/***********************************************************************/
-
-#define INCA_IP2_WDT (KSEG1+0x1F880000)
-/***********************************************************************/
-
-/***Watchdog Timer Control Register ***/
-#define INCA_IP2_WDT_BIU_WDT_CR ((volatile u32*)(INCA_IP2_WDT + 0x03F0))
-#define INCA_IP2_WDT_BIU_WDT_CR_GEN (1 << 31)
-#define INCA_IP2_WDT_BIU_WDT_CR_DSEN (1 << 30)
-#define INCA_IP2_WDT_BIU_WDT_CR_LPEN (1 << 29)
-#define INCA_IP2_WDT_BIU_WDT_CR_PWL_GET(value) (((value) >> 26) & ((1 << 2) - 1))
-#define INCA_IP2_WDT_BIU_WDT_CR_PWL_SET(value) (((( 1 << 2) - 1) & (value)) << 26)
-#define INCA_IP2_WDT_BIU_WDT_CR_CLKDIV_GET(value) (((value) >> 24) & ((1 << 2) - 1))
-#define INCA_IP2_WDT_BIU_WDT_CR_CLKDIV_SET(value) (((( 1 << 2) - 1) & (value)) << 24)
-#define INCA_IP2_WDT_BIU_WDT_CR_PW_GET(value) (((value) >> 16) & ((1 << 8) - 1))
-#define INCA_IP2_WDT_BIU_WDT_CR_PW_SET(value) (((( 1 << 8) - 1) & (value)) << 16)
-#define INCA_IP2_WDT_BIU_WDT_CR_RELOAD_GET(value) (((value) >> 0) & ((1 << 16) - 1))
-#define INCA_IP2_WDT_BIU_WDT_CR_RELOAD_SET(value) (((( 1 << 16) - 1) & (value)) << 0)
-
-/***Watchdog Timer Status Register***/
-#define INCA_IP2_WDT_BIU_WDT_SR ((volatile u32*)(INCA_IP2_WDT + 0x03F8))
-#define INCA_IP2_WDT_BIU_WDT_SR_EN (1 << 31)
-#define INCA_IP2_WDT_BIU_WDT_SR_AE (1 << 30)
-#define INCA_IP2_WDT_BIU_WDT_SR_PRW (1 << 29)
-#define INCA_IP2_WDT_BIU_WDT_SR_EXP (1 << 28)
-#define INCA_IP2_WDT_BIU_WDT_SR_PWD (1 << 27)
-#define INCA_IP2_WDT_BIU_WDT_SR_DS (1 << 26)
-#define INCA_IP2_WDT_BIU_WDT_SR_VALUE_GET(value) (((value) >> 0) & ((1 << 16) - 1))
-#define INCA_IP2_WDT_BIU_WDT_SR_VALUE_SET(value) (((( 1 << 16) - 1) & (value)) << 0)
-
-
-/***********************************************************************/
-/* Module : BCU0 register address and bits */
-/***********************************************************************/
-
-#define INCA_IP2_BCU0 (KSEG1+0x14100000)
-/***********************************************************************/
-
-#define INCA_IP2_BCU0_CON ((volatile u32*)(INCA_IP2_BCU0 + 0x0010))
-#define INCA_IP2_BCU0_ECON ((volatile u32*)(INCA_IP2_BCU0 + 0x0020))
-#define INCA_IP2_BCU0_EADD ((volatile u32*)(INCA_IP2_BCU0 + 0x0024))
-#define INCA_IP2_BCU0_EDAT ((volatile u32*)(INCA_IP2_BCU0 + 0x0028))
-#define INCA_IP2_BCU0_IRNCR1 ((volatile u32*)(INCA_IP2_BCU0 + 0x00F8))
-#define INCA_IP2_BCU0_IRNCR0 ((volatile u32*)(INCA_IP2_BCU0 + 0x00FC))
-
-
-/***********************************************************************/
-/* Module : BCU1 register address and bits */
-/***********************************************************************/
-
-#define INCA_IP2_BCU1 (KSEG1+0x1E000000)
-/***********************************************************************/
-
-#define INCA_IP2_BCU1_CON ((volatile u32*)(INCA_IP2_BCU1 + 0x0010))
-#define INCA_IP2_BCU1_ECON ((volatile u32*)(INCA_IP2_BCU1 + 0x0020))
-#define INCA_IP2_BCU1_EADD ((volatile u32*)(INCA_IP2_BCU1 + 0x0024))
-#define INCA_IP2_BCU1_EDAT ((volatile u32*)(INCA_IP2_BCU1 + 0x0028))
-#define INCA_IP2_BCU1_IRNCR1 ((volatile u32*)(INCA_IP2_BCU1 + 0x00F8))
-#define INCA_IP2_BCU1_IRNCR0 ((volatile u32*)(INCA_IP2_BCU1 + 0x00FC))
-
-
-/***********************************************************************/
-/* Module : MC register address and bits */
-/***********************************************************************/
-
-#define INCA_IP2_MC (KSEG1+0x1F800000)
-/***********************************************************************/
-
-#define INCA_IP2_MC_ERRCAUSE ((volatile u32*)(INCA_IP2_MC + 0x0010))
-#define INCA_IP2_MC_ERRADDR ((volatile u32*)(INCA_IP2_MC + 0x0020))
-#define INCA_IP2_MC_CON ((volatile u32*)(INCA_IP2_MC + 0x0060))
-
-/***********************************************************************/
-/* Module : MC SDRAM register address and bits */
-/***********************************************************************/
-#define INCA_IP2_SDRAM (KSEG1+0x1F800200)
-/***********************************************************************/
-#define INCA_IP2_SDRAM_MC_CFGPB0 ((volatile u32*)(INCA_IP2_SDRAM + 0x0040))
-
-/***********************************************************************/
-/* Module : MC DDR register address and bits */
-/***********************************************************************/
-#define INCA_IP2_DDR (KSEG1+0x1F801000)
-/***********************************************************************/
-#define INCA_IP2_DDR_MC_DC19 ((volatile u32*)(INCA_IP2_DDR + 0x0130))
-#define INCA_IP2_DDR_MC_DC20 ((volatile u32*)(INCA_IP2_DDR + 0x0140))
-
-
-/***********************************************************************/
-/* Module : PMS register address and bits */
-/***********************************************************************/
-
-#define INCA_IP2_PMS (KSEG1 + 0x1F100C00)
-
-#define INCA_IP2_PMS_PMS_SR ((volatile u32*) (INCA_IP2_PMS + 0x0000))
-#define INCA_IP2_PMS_PMS_SR_ASC1 (1 << 14)
-#define INCA_IP2_PMS_PMS_SR_ASC0 (1 << 13)
-#define INCA_IP2_PMS_PMS_GEN ((volatile u32*) (INCA_IP2_PMS + 0x0004))
-#define INCA_IP2_PMS_PMS_GEN_DMA (1 << 16)
-#define INCA_IP2_PMS_PMS_GEN_ASC1 (1 << 14)
-#define INCA_IP2_PMS_PMS_GEN_ASC0 (1 << 13)
-#define INCA_IP2_PMS_PMS_GEN_SPI0 (1 << 11)
-#define INCA_IP2_PMS_PMS_GEN_SPI1 (1 << 12)
-#define INCA_IP2_PMS_PMS_CFG ((volatile u32*) (INCA_IP2_PMS + 0x0008))
-
-
-/***********************************************************************/
-/* Module : GPIO register address and bits */
-/***********************************************************************/
-
-#define INCA_IP2_GPIO (KSEG1 + 0x1F102600)
-
-#define INCA_IP2_GPIO_OUT ((volatile u32*) (INCA_IP2_GPIO + 0x0000))
-#define INCA_IP2_GPIO_IN ((volatile u32*) (INCA_IP2_GPIO + 0x0004))
-#define INCA_IP2_GPIO_DIR ((volatile u32*) (INCA_IP2_GPIO + 0x0008))
-#define INCA_IP2_GPIO_ALTSEL1 ((volatile u32*) (INCA_IP2_GPIO + 0x000C))
-#define INCA_IP2_GPIO_ALTSEL2 ((volatile u32*) (INCA_IP2_GPIO + 0x0010))
-#define INCA_IP2_GPIO_STOFF ((volatile u32*) (INCA_IP2_GPIO + 0x0014))
-#define INCA_IP2_GPIO_OD ((volatile u32*) (INCA_IP2_GPIO + 0x0018))
-#define INCA_IP2_GPIO_PUDEB ((volatile u32*) (INCA_IP2_GPIO + 0x001C))
-
-/***********************************************************************/
-/* Module : RCU register address and bits */
-/***********************************************************************/
-
-#define INCA_IP2_RCU (KSEG1+0x1E001C00)
-/***********************************************************************/
-
-/***Reset Request Register***/
-#define INCA_IP2_RCU_RST_REQ ((volatile u32*)(INCA_IP2_RCU + 0x0000))
-#define INCA_IP2_RCU_RST_REQ_CPU0 (1 << 31)
-#define INCA_IP2_RCU_RST_REQ_CPU1 (1 << 30)
-#define INCA_IP2_RCU_RST_REQ_CPUSUB (1 << 29)
-#define INCA_IP2_RCU_RST_REQ_HRST (1 << 28)
-#define INCA_IP2_RCU_RST_REQ_WDT0 (1 << 27)
-#define INCA_IP2_RCU_RST_REQ_WDT1 (1 << 26)
-#define INCA_IP2_RCU_RST_REQ_CFG_GET(value) (((value) >> 23) & ((1 << 3) - 1))
-#define INCA_IP2_RCU_RST_REQ_CFG_SET(value) (((( 1 << 3) - 1) & (value)) << 23)
-#define INCA_IP2_RCU_RST_REQ_SWTBOOT (1 << 22)
-#define INCA_IP2_RCU_RST_REQ_DMA (1 << 21)
-#define INCA_IP2_RCU_RST_REQ_ETHPHY1 (1 << 20)
-#define INCA_IP2_RCU_RST_REQ_ETHPHY0 (1 << 19)
-#define INCA_IP2_RCU_RST_REQ_CPU0_BR (1 << 18)
-
-/* CPU0, CPU1, CPUSUB, HRST, WDT0, WDT1, DMA, ETHPHY1, ETHPHY0 */
-#define INCA_IP2_RCU_RST_REQ_ALL 0xFC380000
-
-/***Reset Status Register***/
-#define INCA_IP2_RCU_SR ((volatile u32*)(INCA_IP2_RCU + 0x0008))
-
-/***NMI Status Register***/
-#define INCA_IP2_RCU_NMISR ((volatile u32*)(INCA_IP2_RCU + 0x00F4))
-#define INCA_IP2_RCU_NMISR_NMIEXT (1 << 2)
-#define INCA_IP2_RCU_NMISR_NMIPLL2 (1 << 1)
-#define INCA_IP2_RCU_NMISR_NMIPLL1 (1 << 0)
-
-/***********************************************************************/
-/* Module : EBU register address and bits */
-/***********************************************************************/
-
-#define INCA_IP2_EBU (KSEG1+0x14102000)
-/***********************************************************************/
-
-#define INCA_IP2_EBU_ADDSEL0 ((volatile u32*)(INCA_IP2_EBU + 0x0020))
-#define INCA_IP2_EBU_ADDSEL1 ((volatile u32*)(INCA_IP2_EBU + 0x0024))
-#define INCA_IP2_EBU_ADDSEL2 ((volatile u32*)(INCA_IP2_EBU + 0x0028))
-#define INCA_IP2_EBU_ADDSEL3 ((volatile u32*)(INCA_IP2_EBU + 0x002C))
-#define INCA_IP2_EBU_CON0 ((volatile u32*)(INCA_IP2_EBU + 0x0060))
-#define INCA_IP2_EBU_CON1 ((volatile u32*)(INCA_IP2_EBU + 0x0064))
-#define INCA_IP2_EBU_CON2 ((volatile u32*)(INCA_IP2_EBU + 0x0068))
-#define INCA_IP2_EBU_CON3 ((volatile u32*)(INCA_IP2_EBU + 0x006C))
-#define INCA_IP2_EBU_CON_WRDIS (1 << 31)
-
-
-
-
-/***********************************************************************/
-/* Module : SWITCH register address and bits */
-/***********************************************************************/
-
-#define INCA_IP2_SWITCH (KSEG1+0x18000000)
-/***********************************************************************/
-
-/* PR Base address */
-#define PR_BASE (INCA_IP2_SWITCH + 0x00008000)
-
-/* SE Base Address */
-#define SE_BASE (INCA_IP2_SWITCH + 0x00009000)
-
-#define PR_CTRL_REG (PR_BASE + 0x0000)
-#define MA_LEARN_REG (PR_BASE + 0x0004)
-#define DST_LOOKUP_REG (PR_BASE + 0x0008)
-
-#define COS_SEL_REG (PR_BASE + 0x000c)
-#define PRI2_COS_REG (PR_BASE + 0x0010)
-#define UNKNOWN_DEST_REG (PR_BASE + 0x0014)
-
-#define CPU_ACS_CTRL_REG (PR_BASE + 0x0018)
-#define CPU_ACS_DATA_REG (PR_BASE + 0x001c)
-
-#define MA_READ_REG (PR_BASE + 0x0020)
-#define TB_CTRL_REG (PR_BASE + 0x0024)
-#define RATE_REG (PR_BASE + 0x0028)
-#define BURST_REG (PR_BASE + 0x0048)
-#define EBURST_REG (PR_BASE + 0x0068)
-
-#define RULE_SEL_REG (PR_BASE + 0x0088)
-
-#define GEN_SFT_AGE_STB (PR_BASE + 0x008C)
-#define PR_ISR_REG (PR_BASE + 0x0090)
-#define PR_IMR_REG (PR_BASE + 0x0094)
-#define PR_IPR_REG (PR_BASE + 0x0098)
-#define BPDU_REG (PR_BASE + 0x00A4)
-
-/* Switching Engine Register Description */
-#define QLL_CMD_REG (SE_BASE)
-#define QLL_DATA_REG0 (SE_BASE + 0x0004)
-#define QLL_DATA_REG1 (SE_BASE + 0x0008)
-
-#define VLAN_MIBS_CMD_REG (SE_BASE + 0x000c)
-#define VLAN_MIBS_DATA_REG (SE_BASE + 0x0010)
-
-#define SD_CMD_REG (SE_BASE + 0x0014)
-#define SD_DATA_REGS0 (SE_BASE + 0x0018)
-#define SD_DATA_REGS1 (SE_BASE + 0x001C)
-#define SD_DATA_REGS2 (SE_BASE + 0x0020)
-
-#define VLAN_TBL_CMD_REG (SE_BASE + 0x0024)
-#define VLAN_TBL_DATA_REG (SE_BASE + 0x0028)
-
-#define FD_TBL_CMD_REG (SE_BASE + 0x002c)
-#define FD_TBL_DATA_REG (SE_BASE + 0x0030)
-
-#define SYMM_VLAN_REG (SE_BASE + 0x0038)
-#define PORT_AUTH (SE_BASE + 0x0048)
-#define CPU_LINK_OK_REG (SE_BASE + 0x0050)
-/* #define TRUNK_CTRL_REGS (SE_BASE + 0x0054) */
-#define MIRROR_PORT_REG (SE_BASE + 0x0064)
-
-#define ST_PT_REG (SE_BASE + 0x0068)
-#define JUMBO_ENABLE_REG (SE_BASE + 0x006C)
-#define STACK_PORT_REG (SE_BASE + 0x0074)
-#define EG_MON_REG (SE_BASE + 0x007C)
-#define VR_MIB_REG (SE_BASE + 0x0080)
-#define QUEUE_CMD_REGS (SE_BASE + 0x0090)
-
-#define GLOBAL_RX_WM_REG (SE_BASE + 0x0200)
-#define PORT0_RX_WM_REG0 (SE_BASE + 0x0204)
-#define PORT1_RX_WM_REG0 (SE_BASE + 0x0208)
-#define PORT2_RX_WM_REG0 (SE_BASE + 0x020C)
-
-#define PORT_RX_WM_REGS (SE_BASE + 0x0200)
-#define PORT_TX_WM_REGS (SE_BASE + 0x0300)
-#define PORT0_TX_WM_REG0 (SE_BASE + 0x0330)
-#define PORT1_TX_WM_REG0 (SE_BASE + 0x0338)
-#define PORT2_TX_WM_REG0 (SE_BASE + 0x0340)
-#define PORT0_TX_WM_REG1 (SE_BASE + 0x0334)
-#define PORT1_TX_WM_REG1 (SE_BASE + 0x033C)
-#define PORT2_TX_WM_REG1 (SE_BASE + 0x0344)
-
-
-#define QUEUE_STATUS_REGS (SE_BASE + 0x0400)
-
-#define SE_INT_STS_REG (SE_BASE + 0x08e0)
-#define SE_INT_MSK_REG_RD (SE_BASE + 0x08e4)
-#define SE_INT_MSK_REG_WR (SE_BASE + 0x08e8)
-#define SE_INT_PRI_REG_RD (SE_BASE + 0x08ec)
-#define SE_INT_PRI_REG_WR (SE_BASE + 0x08f0) /* address too be defined*/
-
-/***********************************************************************/
-/* Module : Ethernet Switch port related addresses and bits */
-/***********************************************************************/
-#define GPORT0_BASE (KSEG1+0x18006000)
-#define GPORT1_BASE (KSEG1+0x18007000)
-#define GPORT2_BASE (KSEG1+0x1800C000)
-
-#define PORTREG_BASE GPORT0_BASE
-
-#define SWITCH_P0_GMAC_REG (GPORT0_BASE + 0x0004)
-#define SWITCH_P0_GMAC_CTRL (GPORT0_BASE + 0x000C)
-#define SWITCH_P0_RTX_INT_STATUS (GPORT0_BASE + 0x0010)
-#define SWITCH_P0_RTX_INT_MASK (GPORT0_BASE + 0x0014)
-#define SWITCH_P0_INT_PRIORITY (GPORT0_BASE + 0x0018)
-#define SWITCH_P0_RX_CONF (GPORT0_BASE + 0x0400)
-#define SWITCH_P0_OFFSET0_REG (GPORT0_BASE + 0x0404)
-#define SWITCH_P0_OFFSET1_REG (GPORT0_BASE + 0x0408)
-#define SWITCH_P0_PORT_MASK0_REG (GPORT0_BASE + 0x0420)
-#define SWITCH_P0_PORT_MASK1_REG (GPORT0_BASE + 0x0424)
-#define SWITCH_P0_PORT_MASK2_REG (GPORT0_BASE + 0x0428)
-#define SWITCH_P0_PORT_MASK3_REG (GPORT0_BASE + 0x042C)
-#define SWITCH_P0_PORT_RULE0_REG (GPORT0_BASE + 0x0430)
-#define SWITCH_P0_PORT_RULE1_REG (GPORT0_BASE + 0x0434)
-#define SWITCH_P0_PORT_RULE2_REG (GPORT0_BASE + 0x0438)
-#define SWITCH_P0_PORT_RULE3_REG (GPORT0_BASE + 0x043C)
-#define SWITCH_P0_PORT_IKEY_SEL (GPORT0_BASE + 0x0440)
-#define SWITCH_P0_PORT_RX_VLAN_ID (GPORT0_BASE + 0x0450)
-#define SWITCH_P0_TX_CONF (GPORT0_BASE + 0x0800)
-#define SWITCH_P0_PORT_TX_VLAN_ID (GPORT0_BASE + 0x0804)
-#define SWITCH_P0_PORT_MIB_REG_0 (GPORT0_BASE + 0x0C00)
-#define SWITCH_P0_GMAC_MIB_REG_0 (GPORT0_BASE + 0x0C54)
-
-#define SWITCH_P1_GMAC_REG (GPORT1_BASE + 0x0004)
-#define SWITCH_P1_GMAC_CTRL (GPORT1_BASE + 0x000C)
-#define SWITCH_P1_RTX_INT_STATUS (GPORT1_BASE + 0x0010)
-#define SWITCH_P1_RTX_INT_MASK (GPORT1_BASE + 0x0014)
-#define SWITCH_P1_INT_PRIORITY (GPORT1_BASE + 0x0018)
-#define SWITCH_P1_RX_CONF (GPORT1_BASE + 0x0400)
-#define SWITCH_P1_OFFSET0_REG (GPORT1_BASE + 0x0404)
-#define SWITCH_P1_OFFSET1_REG (GPORT1_BASE + 0x0408)
-#define SWITCH_P1_PORT_MASK0_REG (GPORT1_BASE + 0x0420)
-#define SWITCH_P1_PORT_MASK1_REG (GPORT1_BASE + 0x0424)
-#define SWITCH_P1_PORT_MASK2_REG (GPORT1_BASE + 0x0428)
-#define SWITCH_P1_PORT_MASK3_REG (GPORT1_BASE + 0x042C)
-#define SWITCH_P1_PORT_RULE0_REG (GPORT1_BASE + 0x0430)
-#define SWITCH_P1_PORT_RULE1_REG (GPORT1_BASE + 0x0434)
-#define SWITCH_P1_PORT_RULE2_REG (GPORT1_BASE + 0x0438)
-#define SWITCH_P1_PORT_RULE3_REG (GPORT1_BASE + 0x043C)
-#define SWITCH_P1_PORT_IKEY_SEL (GPORT1_BASE + 0x0440)
-#define SWITCH_P1_PORT_RX_VLAN_ID (GPORT1_BASE + 0x0450)
-#define SWITCH_P1_TX_CONF (GPORT1_BASE + 0x0800)
-#define SWITCH_P1_PORT_TX_VLAN_ID (GPORT1_BASE + 0x0804)
-#define SWITCH_P1_PORT_MIB_REG_0 (GPORT1_BASE + 0x0C00)
-#define SWITCH_P1_GMAC_MIB_REG_0 (GPORT1_BASE + 0x0C54)
-
-#define SWITCH_P2_GMAC_REG (GPORT2_BASE + 0x0004)
-#define SWITCH_P2_GMAC_CTRL (GPORT2_BASE + 0x000C)
-#define SWITCH_P2_RTX_INT_STATUS (GPORT2_BASE + 0x0010)
-#define SWITCH_P2_RTX_INT_MASK (GPORT2_BASE + 0x0014)
-#define SWITCH_P2_INT_PRIORITY (GPORT2_BASE + 0x0018)
-#define SWITCH_P2_MDIO_ID_1 (GPORT2_BASE + 0x00A8)
-#define SWITCH_P2_PAUSE_CTL_1 (GPORT2_BASE + 0x00B0)
-#define SWITCH_P2_MDIO_MOD_SEL (GPORT2_BASE + 0x00B4)
-#define SWITCH_P2_MDIO_ACC_0 (GPORT2_BASE + 0x00B8)
-#define SWITCH_P2_RX_CONF (GPORT2_BASE + 0x0400)
-#define SWITCH_P2_OFFSET0_REG (GPORT2_BASE + 0x0404)
-#define SWITCH_P2_OFFSET1_REG (GPORT2_BASE + 0x0408)
-#define SWITCH_P2_PORT_MASK0_REG (GPORT2_BASE + 0x0420)
-#define SWITCH_P2_PORT_MASK1_REG (GPORT2_BASE + 0x0424)
-#define SWITCH_P2_PORT_MASK2_REG (GPORT2_BASE + 0x0428)
-#define SWITCH_P2_PORT_MASK3_REG (GPORT2_BASE + 0x042C)
-#define SWITCH_P2_PORT_RULE0_REG (GPORT2_BASE + 0x0430)
-#define SWITCH_P2_PORT_RULE1_REG (GPORT2_BASE + 0x0434)
-#define SWITCH_P2_PORT_RULE2_REG (GPORT2_BASE + 0x0438)
-#define SWITCH_P2_PORT_RULE3_REG (GPORT2_BASE + 0x043C)
-#define SWITCH_P2_PORT_IKEY_SEL (GPORT2_BASE + 0x0440)
-#define SWITCH_P2_PORT_RX_VLAN_ID (GPORT2_BASE + 0x0450)
-#define SWITCH_P2_TX_CONF (GPORT2_BASE + 0x0800)
-#define SWITCH_P2_PORT_TX_VLAN_ID (GPORT2_BASE + 0x0804)
-#define SWITCH_P2_PORT_MIB_REG_0 (GPORT2_BASE + 0x0C00)
-#define SWITCH_P2_GMAC_MIB_REG_0 (GPORT2_BASE + 0x0C54)
-
-#define MDIO_MOD_SEL SWITCH_P2_MDIO_MOD_SEL
-#define SWITCH_MDIO_ACC SWITCH_P2_MDIO_ACC_0
-#define SWITCH_MDIO_ID SWITCH_P2_MDIO_ID_1
-/* #define TX_CONFIG_REG SWITCH_P0_TX_CONF */
-
-#define SWITCH_PMAC_HD_CTL (GPORT2_BASE + 0x0070)
-#define SWITCH_PMAC_SA1 (GPORT2_BASE + 0x0074)
-#define SWITCH_PMAC_SA2 (GPORT2_BASE + 0x0078)
-#define SWITCH_PMAC_DA1 (GPORT2_BASE + 0x007C)
-#define SWITCH_PMAC_DA2 (GPORT2_BASE + 0x0080)
-#define SWITCH_PMAC_VLAN (GPORT2_BASE + 0x0084)
-#define SWITCH_PMAC_TX_IPG (GPORT2_BASE + 0x0088)
-#define SWITCH_PMAC_RX_IPG (GPORT2_BASE + 0x008C)
-
+++ /dev/null
-#define FLASH_STRAP 0x1
-#define MII_0_STRAP 0x2
-#define MII_1_STRAP 0x3
-#define ASC_STRAP 0x4
-#define SFLASH_STRAP 0x5
-#define RESERVE_STRAP 0x6
-#define PRODUCT_TEST_STRAP 0x7
-#define PIN_STRAP_MASK 0x001C0000
-#define PIN_STRAP_SHIFT 18
-#define PIN_STRAP 0xB0100914
-#define SDRAM_WIDTH_MASK 0x400000
-#define SDRAM_WIDTH_SHIFT 22
+++ /dev/null
-#ifndef _BOOT_H
-#define _BOOT_H
-
-/* All this should be defined somewhere in danube.h later... */
-
-#define MPS_SRAM_BASE_ADDRESS 0xBF200000
-#define MPS_SRAM_BOOT_OFFSET 0x1C0
-
-/* Offset for CPU1 (both CPUs have same register set) */
-#define BOOT_BASE_ADDRESS (MPS_SRAM_BASE_ADDRESS + MPS_SRAM_BOOT_OFFSET)
-#define BOOT_CPU_OFFSET 0x20
-
-
-#ifdef __ASSEMBLY__
-#define BOOT_RVEC (BOOT_BASE_ADDRESS + 0x00)
-#define BOOT_NVEC (BOOT_BASE_ADDRESS + 0x04)
-#define BOOT_EVEC (BOOT_BASE_ADDRESS + 0x08)
-#define BOOT_CP0_CAUSE (BOOT_BASE_ADDRESS + 0x0C)
-#define BOOT_CP0_EPC (BOOT_BASE_ADDRESS + 0x10)
-#define BOOT_CP0_EEPC (BOOT_BASE_ADDRESS + 0x14)
-#define BOOT_SIZE (BOOT_BASE_ADDRESS + 0x18) /* for CPU1 */
-#define BOOT_RCU_SR (BOOT_BASE_ADDRESS + 0x18) /* for CPU0 */
-#define BOOT_CFG_STAT (BOOT_BASE_ADDRESS + 0x1C)
-#else
-#define BOOT_RVEC(cpu) (volatile u32*)(BOOT_BASE_ADDRESS + (cpu * BOOT_CPU_OFFSET) + 0x00)
-#define BOOT_NVEC(cpu) (volatile u32*)(BOOT_BASE_ADDRESS + (cpu * BOOT_CPU_OFFSET) + 0x04)
-#define BOOT_EVEC(cpu) (volatile u32*)(BOOT_BASE_ADDRESS + (cpu * BOOT_CPU_OFFSET) + 0x08)
-#define BOOT_CP0_STATUS(cpu) (volatile u32*)(BOOT_BASE_ADDRESS + (cpu * BOOT_CPU_OFFSET) + 0x0C)
-#define BOOT_CP0_EPC(cpu) (volatile u32*)(BOOT_BASE_ADDRESS + (cpu * BOOT_CPU_OFFSET) + 0x10)
-#define BOOT_CP0_EEPC(cpu) (volatile u32*)(BOOT_BASE_ADDRESS + (cpu * BOOT_CPU_OFFSET) + 0x14)
-#define BOOT_SIZE(cpu) (volatile u32*)(BOOT_BASE_ADDRESS + (cpu * BOOT_CPU_OFFSET) + 0x18) /* for CPU1 */
-#define BOOT_RCU_SR(cpu) (volatile u32*)(BOOT_BASE_ADDRESS + (cpu * BOOT_CPU_OFFSET) + 0x18) /* for CPU0 */
-#define BOOT_CFG_STAT(cpu) (volatile u32*)(BOOT_BASE_ADDRESS + (cpu * BOOT_CPU_OFFSET) + 0x1C)
-#endif
-
-#define BOOT_CFG_NOR 0x01
-#define BOOT_CFG_MII 0x02
-#define BOOT_CFG_PCI 0x03
-#define BOOT_CFG_ASC 0x04
-#define BOOT_CFG_SFLASH 0x05
-#define BOOT_CFG_NAND 0x06
-#define BOOT_CFG_RMII 0x07
-#define BOOT_CFG_TEST 0x00
-
-#define BOOT_NUM_RETRY 3
-
-#define BOOT_STAT_MASK_ALL 0x0000FFFF
-#define BOOT_STAT_MASK_STAT 0x0000F000
-#define BOOT_STAT_MASK_BERR 0x00000F00
-#define BOOT_STAT_MASK_BSTRAP 0x000000F0
-#define BOOT_STAT_MASK_BMODULE 0x0000000F
-
-#define BOOT_STAT_INIT 0x00000000
-#define BOOT_STAT_BSTRAP 0x00001000
-#define BOOT_STAT_RETRY 0x00002000
-#define BOOT_STAT_START 0x00003000
-#define BOOT_STAT_HALT 0x0000F000
-
-#define BOOT_ERR_NO_RVEC 0x00000100
-#define BOOT_ERR_NO_NVEC 0x00000200
-#define BOOT_ERR_NO_EVEC 0x00000300
-#define BOOT_ERR_BSTRAP 0x00000400
-#define BOOT_ERR_EXC 0x00000800
-
-#ifndef __ASSEMBLY__
-void boot_set_status( u32 status, u32 mask);
-void boot_set_config( u32 config);
-void boot_set_rvec( u32 vector);
-void boot_set_size( u32 size);
-void boot_sdbg( u8* string, u32 value);
-void boot_error( u32 berr);
-int boot_from_ebu(void);
-void _boot_rvec(void);
-typedef struct
-{
- u32 cpu; /** CPU number */
- u32 config; /** Boot configuration */
- u32 endian; /** CPU endianess */
- u32 debug; /** Debug mode */
- u32 (*exit)(void); /** application vector */
-} boot_data;
-
-extern boot_data bootrom;
-#endif
-
-#endif /* #ifdef _BOOT_H */
+++ /dev/null
-/*
- * (C) Copyright 2003
- * Wolfgang Denk, DENX Software Engineering, wd@denx.de.
- *
- * See file CREDITS for list of people who contributed to this
- * project.
- *
- * This program is free software; you can redistribute it and/or
- * modify it under the terms of the GNU General Public License as
- * published by the Free Software Foundation; either version 2 of
- * the License, or (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program; if not, write to the Free Software
- * Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- * MA 02111-1307 USA
- */
-
-/*
- * This file contains the configuration parameters for the danube board.
- */
-
-#ifndef __CONFIG_H
-#define __CONFIG_H
-
-#define USE_REFERENCE_BOARD
-//#define USE_EVALUATION_BOARD
-
-//#define DANUBE_BOOT_FROM_EBU
-#define DANUBE_USE_DDR_RAM
-
-#ifdef DANUBE_USE_DDR_RAM
-//#define DANUBE_DDR_RAM_111M
-//#define DANUBE_DDR_RAM_166M
-//#define PROMOSDDR400
-//#define DDR_SAMSUNG_166M
-#define DDR_PSC_166M
-//#define DANUBE_DDR_RAM_133M
-#define DANUBE_DDR_RAM_SIZE 32 /* 32M DDR-DRAM for reference board */
-#endif
-
-#define CONFIG_LZMA 1 /* use LZMA for compression */
-
-#define CLK_OUT2_25MHZ
-#define CONFIG_MIPS32 1 /* MIPS 4Kc CPU core */
-#define CONFIG_IFX_MIPS 1 /* in an Infineon chip */
-#define CONFIG_DANUBE 1 /* on a danube Board */
-#define RAM_SIZE 0x2000000 /*32M ram*/
-
-#define CPU_CLOCK_RATE 235000000 /* 235 MHz clock for the MIPS core */
-
-#define INFINEON_EBU_BOOTCFG 0x688C688C /* CMULT = 8 for 150 MHz */
-
-#define CONFIG_BOOTDELAY 3 /* autoboot after 3 seconds */
-
-#define CONFIG_BAUDRATE 115200
-
-#define DEBUG_PARSER 2
-
-/* valid baudrates */
-#define CFG_BAUDRATE_TABLE { 300, 9600, 19200, 38400, 57600, 115200 }
-
-#ifndef CFG_BOOTSTRAP_CODE
-#define CONFIG_TIMESTAMP /* Print image info with timestamp */
-#endif
-
-#define CONFIG_PREBOOT "echo;" \
- "echo Type \"run flash_nfs\" to mount root filesystem over NFS;" \
- "echo"
-
-#undef CONFIG_BOOTARGS
-/* by MarsLin 2005/05/10, to support different hardware configuations */
-//#define CONFIG_EXTRA_ENV_SETTINGS <configs/ifx_extra_env.h>
-#define CONFIG_EXTRA_ENV_SETTINGS \
- "ethaddr=11:22:33:44:55:66\0" \
- "serverip=192.168.45.100\0" \
- "ipaddr=192.168.45.108\0" \
- "ram_addr=0x80500000\0" \
- "kernel_addr=0xb0030000\0" \
- "flashargs=setenv bootargs rootfstype=squashfs,jffs2 init=/etc/preinit\0" \
- "nfsargs=setenv bootargs root=/dev/nfs rw nfsroot=${serverip}:${rootpath} init=/etc/preinit\0" \
- "addip=setenv bootargs ${bootargs} ip=${ipaddr}:${serverip}:${gatewayip}:${netmask}:${hostname}:${netdev}:off\0" \
- "addmisc=setenv bootargs ${bootargs} console=ttyS1,115200 ethaddr=${ethaddr} ${mtdparts}\0" \
- "flash_flash=run flashargs addip addmisc;bootm ${kernel_addr}\0" \
- "flash_nfs=run nfsargs addip addmisc;bootm ${kernel_addr}\0" \
- "net_flash=run load_kernel flashargs addip addmisc;bootm ${ram_addr}\0" \
- "net_nfs=run load_kernel nfsargs addip addmisc;bootm ${ram_addr}\0" \
- "load_kernel=tftp ${ram_addr} ${tftppath}openwrt-ifxmips-uImage\0" \
- "update_uboot=tftp 0x80500000 u-boot.ifx;era 1:0-10; cp.b 0x80500000 0xb0000000 0x10000\0" \
- "update_openwrt=tftp ${ram_addr} ${tftppath}openwrt-ifxmips-squashfs.image; era ${kernel_addr} +${filesize} 0; cp.b ${ram_addr} ${kernel_addr} ${filesize}\0"
-
-#define CONFIG_BOOTCOMMAND "run flash_flash"
-
-#define CONFIG_COMMANDS_YES (CONFIG_CMD_DFL | \
- CFG_CMD_ASKENV | \
- CFG_CMD_NET )
-
-#define CONFIG_COMMANDS_NO (CFG_CMD_NFS | \
- CFG_CMD_FPGA | \
- CFG_CMD_IMLS | \
- CFG_CMD_ITEST | \
- CFG_CMD_XING | \
- CFG_CMD_IMI | \
- CFG_CMD_BMP | \
- CFG_CMD_BOOTD | \
- CFG_CMD_CONSOLE | \
- CFG_CMD_LOADS | \
- CFG_CMD_LOADB )
-
-#define CONFIG_COMMANDS (CONFIG_COMMANDS_YES & ~CONFIG_COMMANDS_NO)
-
-#if 0
- CFG_CMD_DHCP
- CFG_CMD_ELF
- CFG_CMD_NAND
-#endif
-
-#include <cmd_confdefs.h>
-
-/*
- * Miscellaneous configurable options
- */
-#define CFG_LONGHELP /* undef to save memory */
-#define CFG_PROMPT "DANUBE # " /* Monitor Command Prompt */
-#define CFG_CBSIZE 256 /* Console I/O Buffer Size */
-#define CFG_PBSIZE (CFG_CBSIZE+sizeof(CFG_PROMPT)+16) /* Print Buffer Size */
-#define CFG_MAXARGS 16 /* max number of command args*/
-
-#define CFG_MALLOC_LEN 128*1024
-
-#define CFG_BOOTPARAMS_LEN 128*1024
-
-#define CFG_HZ (CPU_CLOCK_RATE / 2)
-
-#define CFG_LOAD_ADDR 0x80100000 /* default load address */
-
-#define CFG_MEMTEST_START 0x80100000
-#define CFG_MEMTEST_END 0x80400000
-
-/*-----------------------------------------------------------------------
- * FLASH and environment organization
- */
-#define CFG_MAX_FLASH_BANKS 1 /* max number of memory banks */
-#define CFG_MAX_FLASH_SECT (135) /* max number of sectors on one chip */
-
-#define PHYS_FLASH_1 0xB0000000 /* Flash Bank #1 */
-#define PHYS_FLASH_2 0xB4000000 /* Flash Bank #2 */
-
-#define BOOTSTRAP_TEXT_BASE 0xb0000000
-
-/* The following #defines are needed to get flash environment right */
-#define CFG_MONITOR_BASE UBOOT_RAM_TEXT_BASE /* board/danube/config.mk. = 0xA0800000 */
-#define BOOTSTRAP_CFG_MONITOR_BASE BOOTSTRAP_TEXT_BASE /* board/danube/config.mk. = 0xA0800000 */
-#define CFG_MONITOR_LEN (256 << 10)
-
-#define CFG_INIT_SP_OFFSET 0x400000
-
-#define CFG_FLASH_BASE PHYS_FLASH_1
-
-/* timeout values are in ticks */
-#define CFG_FLASH_ERASE_TOUT (20 * CFG_HZ) /* Timeout for Flash Erase */
-#define CFG_FLASH_WRITE_TOUT (20 * CFG_HZ) /* Timeout for Flash Write */
-
-#define CFG_ENV_IS_IN_FLASH 1
-//#define CFG_ENV_IS_NOWHERE 1
-//#define CFG_ENV_IS_IN_NVRAM 1
-/* Address and size of Primary Environment Sector */
-#define CFG_ENV_ADDR 0xB0020000
-#define CFG_ENV_SIZE 0x10000
-
-#define CONFIG_FLASH_16BIT
-
-#define CONFIG_NR_DRAM_BANKS 1
-
-#define CONFIG_DANUBE_SWITCH
-#define CONFIG_NET_MULTI
-#define CONFIG_ENV_OVERWRITE
-
-#define EXCEPTION_BASE 0x200
-
-/**
- *\brief definition for nand
- *
- */
-#define CFG_MAX_NAND_DEVICE 1 /* Max number of NAND devices */
-#define NAND_ChipID_UNKNOWN 0x00
-#define SECTORSIZE 512
-#define NAND_MAX_FLOORS 1
-#define NAND_MAX_CHIPS 1
-
-
-#define ADDR_COLUMN 1
-#define ADDR_PAGE 2
-#define ADDR_COLUMN_PAGE 3
-
-
-#define AT91_SMART_MEDIA_ALE (1 << 22) /* our ALE is AD22 */
-#define AT91_SMART_MEDIA_CLE (1 << 21) /* our CLE is AD21 */
-
-#define NAND_DISABLE_CE(nand)
-#define NAND_ENABLE_CE(nand)
-#define NAND_WAIT_READY(nand)
-#define WRITE_NAND_COMMAND(d, adr)
-#define WRITE_NAND_ADDRESS(d, adr)
-#define WRITE_NAND(d, adr)
-#define READ_NAND(adr)
-/* the following are NOP's in our implementation */
-#define NAND_CTL_CLRALE(nandptr)
-#define NAND_CTL_SETALE(nandptr)
-#define NAND_CTL_CLRCLE(nandptr)
-#define NAND_CTL_SETCLE(nandptr)
-
-
-
-#define NAND_BASE_ADDRESS 0xB4000000
-
-#define NAND_WRITE(addr, val) *((u8*)(NAND_BASE_ADDRESS | (addr))) = val;while((*EBU_NAND_WAIT & 0x08) == 0);
-#define NAND_READ(addr, val) val = *((u8*)(NAND_BASE_ADDRESS | (addr)))
-#define NAND_CE_SET
-#define NAND_CE_CLEAR
-#define NAND_READY ( ((*EBU_NAND_WAIT)&0x07) == 7)
-#define NAND_READY_CLEAR *EBU_NAND_WAIT = 0;
-#define WRITE_CMD 0x18
-#define WRITE_ADDR 0x14
-#define WRITE_LADDR 0x10
-#define WRITE_DATA 0x10
-#define READ_DATA 0x10
-#define READ_LDATA 0x00
-#define ACCESS_WAIT
-#define IFX_ATC_NAND 0xc176
-#define IFX_BTC_NAND 0xc166
-#define ST_512WB2_NAND 0x2076
-
-#define NAND_OK 0x00000000 /* Bootstrap succesful, start address in BOOT_RVEC */
-#define NAND_ERR 0x80000000
-#define NAND_ACC_TIMEOUT (NAND_ERR | 0x00000001)
-#define NAND_ACC_ERR (NAND_ERR | 0x00000002)
-
-
-/*****************************************************************************
- * DANUBE
- *****************************************************************************/
-/* lock cache for C program stack */
-/* points to ROM */
-/* stack size is 16K */
-#define LOCK_DCACHE_ADDR 0x9FC00000
-#define LOCK_DCACHE_SIZE 0x1000
-
-/*
- * Memory layout
- */
-#define CFG_SDRAM_BASE 0x80000000
-#define CFG_SDRAM_BASE_UNCACHE 0xA0000000
-#define CFG_CACHE_LOCK_SIZE LOCK_DCACHE_SIZE
-
-/*
- * Cache settings
- */
-#define CFG_CACHE_SIZE 16384
-#define CFG_CACHE_LINES 32
-#define CFG_CACHE_WAYS 4
-#define CFG_CACHE_SETS 128
-
-#define CFG_ICACHE_SIZE CFG_CACHE_SIZE
-#define CFG_DCACHE_SIZE CFG_CACHE_SIZE
-#define CFG_CACHELINE_SIZE CFG_CACHE_LINES
-
-#endif /* __CONFIG_H */
+++ /dev/null
-#
-# (C) Copyright 2003
-# Wolfgang Denk, DENX Software Engineering, wd@denx.de.
-#
-# See file CREDITS for list of people who contributed to this
-# project.
-#
-# This program is free software; you can redistribute it and/or
-# modify it under the terms of the GNU General Public License as
-# published by the Free Software Foundation; either version 2 of
-# the License, or (at your option) any later version.
-#
-# This program is distributed in the hope that it will be useful,
-# but WITHOUT ANY WARRANTY; without even the implied warranty of
-# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
-# GNU General Public License for more details.
-#
-# You should have received a copy of the GNU General Public License
-# along with this program; if not, write to the Free Software
-# Foundation, Inc., 59 Temple Place, Suite 330, Boston,
-# MA 02111-1307 USA
-#
-
-include $(TOPDIR)/config.mk
-
-LIB := $(obj)libbootstrap.a
-
-OBJS := board.o LzmaDecode.o string.o crc32.o LzmaWrapper.o
-CFLAGS += -DCFG_BOOTSTRAP_CODE
-
-ifeq ($(BOOTSTRAP_PRINTF_STATUS), BOOTSTRAP_PRINTF_ENABLED)
-OBJS += time.o console.o ctype.o display_options.o vsprintf.o lists.o devices.o
-CFLAGS += -DDEBUG_ENABLE_BOOTSTRAP_PRINTF
-endif
-
-SRCS := $(OBJS:.o=.c)
-OBJS := $(addprefix $(obj),$(OBJS))
-
-all: $(SRCS) $(obj).depend $(LIB)
-
-$(LIB): $(obj).depend $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
-vpath %.c ../common ../lib_generic ../lib_$(CPU)
-
-board_bootstrap.c:
- ln -s ../lib_$(CPU)/board.c $@
-
-#LzmaDecode.c LzmaWrapper.c string.c crc32.c:
-# ln -s ../lib_generic/$@ $@
-
-#########################################################################
-
-#include $(SRCTREE)/rules.mk
-$(obj).depend: $(SRCS)
- $(CC) -M $(CFLAGS) $^ > $@
-
-sinclude $(obj).depend
-
-#########################################################################
+++ /dev/null
-/*
- LzmaDecode.c
- LZMA Decoder (optimized for Speed version)
-
- LZMA SDK 4.40 Copyright (c) 1999-2006 Igor Pavlov (2006-05-01)
- http://www.7-zip.org/
-
- LZMA SDK is licensed under two licenses:
- 1) GNU Lesser General Public License (GNU LGPL)
- 2) Common Public License (CPL)
- It means that you can select one of these two licenses and
- follow rules of that license.
-
- SPECIAL EXCEPTION:
- Igor Pavlov, as the author of this Code, expressly permits you to
- statically or dynamically link your Code (or bind by name) to the
- interfaces of this file without subjecting your linked Code to the
- terms of the CPL or GNU LGPL. Any modifications or additions
- to this file, however, are subject to the LGPL or CPL terms.
-*/
-
-#include <config.h>
-#include <common.h>
-
-#ifdef CONFIG_LZMA
-
-#include "LzmaDecode.h"
-
-#define kNumTopBits 24
-#define kTopValue ((UInt32)1 << kNumTopBits)
-
-#define kNumBitModelTotalBits 11
-#define kBitModelTotal (1 << kNumBitModelTotalBits)
-#define kNumMoveBits 5
-
-#define RC_READ_BYTE (*Buffer++)
-
-#define RC_INIT2 Code = 0; Range = 0xFFFFFFFF; \
- { int i; for(i = 0; i < 5; i++) { RC_TEST; Code = (Code << 8) | RC_READ_BYTE; }}
-
-#ifdef _LZMA_IN_CB
-
-#ifndef CFG_BOOTSTRAP_CODE
-#define RC_TEST { if (Buffer == BufferLim) \
- { SizeT size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) { printf("ERROR, %s, %d\n", __FILE__, __LINE__); return result; } \
- BufferLim = Buffer + size; if (size == 0) { printf("ERROR, %s, %d\n", __FILE__, __LINE__); return LZMA_RESULT_DATA_ERROR; } }}
-#else //CFG_BOOTSTRAP_CODE
-#define RC_TEST { if (Buffer == BufferLim) \
- { SizeT size; int result = InCallback->Read(InCallback, &Buffer, &size); if (result != LZMA_RESULT_OK) { return result; } \
- BufferLim = Buffer + size; if (size == 0) { return LZMA_RESULT_DATA_ERROR; } }}
-#endif //CFG_BOOTSTRAP_CODE
-
-#define RC_INIT Buffer = BufferLim = 0; RC_INIT2
-
-#else //_LZMA_IN_CB
-
-#ifndef CFG_BOOTSTRAP_CODE
-#define RC_TEST { if (Buffer == BufferLim) { printf("ERROR, %s, %d\n", __FILE__, __LINE__); return LZMA_RESULT_DATA_ERROR; } }
-#else //CFG_BOOTSTRAP_CODE
-#define RC_TEST { if (Buffer == BufferLim) { return LZMA_RESULT_DATA_ERROR; } }
-#endif //CFG_BOOTSTRAP_CODE
-
-#define RC_INIT(buffer, bufferSize) Buffer = buffer; BufferLim = buffer + bufferSize; RC_INIT2
-
-#endif //_LZMA_IN_CB
-
-#define RC_NORMALIZE if (Range < kTopValue) { RC_TEST; Range <<= 8; Code = (Code << 8) | RC_READ_BYTE; }
-#define IfBit0(p) RC_NORMALIZE; bound = (Range >> kNumBitModelTotalBits) * *(p); if (Code < bound)
-#define UpdateBit0(p) Range = bound; *(p) += (kBitModelTotal - *(p)) >> kNumMoveBits;
-#define UpdateBit1(p) Range -= bound; Code -= bound; *(p) -= (*(p)) >> kNumMoveBits;
-
-#define RC_GET_BIT2(p, mi, A0, A1) IfBit0(p) \
- { UpdateBit0(p); mi <<= 1; A0; } else \
- { UpdateBit1(p); mi = (mi + mi) + 1; A1; }
-
-#define RC_GET_BIT(p, mi) RC_GET_BIT2(p, mi, ; , ;)
-
-#define RangeDecoderBitTreeDecode(probs, numLevels, res) \
- { int i = numLevels; res = 1; \
- do { CProb *p = probs + res; RC_GET_BIT(p, res) } while(--i != 0); \
- res -= (1 << numLevels); }
-
-
-#define kNumPosBitsMax 4
-#define kNumPosStatesMax (1 << kNumPosBitsMax)
-
-#define kLenNumLowBits 3
-#define kLenNumLowSymbols (1 << kLenNumLowBits)
-#define kLenNumMidBits 3
-#define kLenNumMidSymbols (1 << kLenNumMidBits)
-#define kLenNumHighBits 8
-#define kLenNumHighSymbols (1 << kLenNumHighBits)
-
-#define LenChoice 0
-#define LenChoice2 (LenChoice + 1)
-#define LenLow (LenChoice2 + 1)
-#define LenMid (LenLow + (kNumPosStatesMax << kLenNumLowBits))
-#define LenHigh (LenMid + (kNumPosStatesMax << kLenNumMidBits))
-#define kNumLenProbs (LenHigh + kLenNumHighSymbols)
-
-
-#define kNumStates 12
-#define kNumLitStates 7
-
-#define kStartPosModelIndex 4
-#define kEndPosModelIndex 14
-#define kNumFullDistances (1 << (kEndPosModelIndex >> 1))
-
-#define kNumPosSlotBits 6
-#define kNumLenToPosStates 4
-
-#define kNumAlignBits 4
-#define kAlignTableSize (1 << kNumAlignBits)
-
-#define kMatchMinLen 2
-
-#define IsMatch 0
-#define IsRep (IsMatch + (kNumStates << kNumPosBitsMax))
-#define IsRepG0 (IsRep + kNumStates)
-#define IsRepG1 (IsRepG0 + kNumStates)
-#define IsRepG2 (IsRepG1 + kNumStates)
-#define IsRep0Long (IsRepG2 + kNumStates)
-#define PosSlot (IsRep0Long + (kNumStates << kNumPosBitsMax))
-#define SpecPos (PosSlot + (kNumLenToPosStates << kNumPosSlotBits))
-#define Align (SpecPos + kNumFullDistances - kEndPosModelIndex)
-#define LenCoder (Align + kAlignTableSize)
-#define RepLenCoder (LenCoder + kNumLenProbs)
-#define Literal (RepLenCoder + kNumLenProbs)
-
-#if Literal != LZMA_BASE_SIZE
-StopCompilingDueBUG
-#endif
-
-int LzmaDecodeProperties(CLzmaProperties *propsRes, const unsigned char *propsData, int size)
-{
- unsigned char prop0;
- if (size < LZMA_PROPERTIES_SIZE)
- {
-#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE)
- printf("ERROR: %s, %d\n", __FILE__, __LINE__);
-#endif
- return LZMA_RESULT_DATA_ERROR;
- }
- prop0 = propsData[0];
- if (prop0 >= (9 * 5 * 5))
- {
-#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE)
- printf("ERROR: %s, %d\n", __FILE__, __LINE__);
-#endif
- return LZMA_RESULT_DATA_ERROR;
- }
- {
- for (propsRes->pb = 0; prop0 >= (9 * 5); propsRes->pb++, prop0 -= (9 * 5));
- for (propsRes->lp = 0; prop0 >= 9; propsRes->lp++, prop0 -= 9);
- propsRes->lc = prop0;
- /*
- unsigned char remainder = (unsigned char)(prop0 / 9);
- propsRes->lc = prop0 % 9;
- propsRes->pb = remainder / 5;
- propsRes->lp = remainder % 5;
- */
- }
-
- #ifdef _LZMA_OUT_READ
- {
- int i;
- propsRes->DictionarySize = 0;
- for (i = 0; i < 4; i++)
- propsRes->DictionarySize += (UInt32)(propsData[1 + i]) << (i * 8);
- if (propsRes->DictionarySize == 0)
- propsRes->DictionarySize = 1;
- }
- #endif
- return LZMA_RESULT_OK;
-}
-
-#define kLzmaStreamWasFinishedId (-1)
-
-int LzmaDecode(CLzmaDecoderState *vs,
- #ifdef _LZMA_IN_CB
- ILzmaInCallback *InCallback,
- #else
- const unsigned char *inStream, SizeT inSize, SizeT *inSizeProcessed,
- #endif
- unsigned char *outStream, SizeT outSize, SizeT *outSizeProcessed)
-{
- CProb *p = vs->Probs;
- SizeT nowPos = 0;
- Byte previousByte = 0;
- UInt32 posStateMask = (1 << (vs->Properties.pb)) - 1;
- UInt32 literalPosMask = (1 << (vs->Properties.lp)) - 1;
- int lc = vs->Properties.lc;
-
- #ifdef _LZMA_OUT_READ
-
- UInt32 Range = vs->Range;
- UInt32 Code = vs->Code;
- #ifdef _LZMA_IN_CB
- const Byte *Buffer = vs->Buffer;
- const Byte *BufferLim = vs->BufferLim;
- #else
- const Byte *Buffer = inStream;
- const Byte *BufferLim = inStream + inSize;
- #endif
- int state = vs->State;
- UInt32 rep0 = vs->Reps[0], rep1 = vs->Reps[1], rep2 = vs->Reps[2], rep3 = vs->Reps[3];
- int len = vs->RemainLen;
- UInt32 globalPos = vs->GlobalPos;
- UInt32 distanceLimit = vs->DistanceLimit;
-
- Byte *dictionary = vs->Dictionary;
- UInt32 dictionarySize = vs->Properties.DictionarySize;
- UInt32 dictionaryPos = vs->DictionaryPos;
-
- Byte tempDictionary[4];
-
- #ifndef _LZMA_IN_CB
- *inSizeProcessed = 0;
- #endif
- *outSizeProcessed = 0;
- if (len == kLzmaStreamWasFinishedId)
- return LZMA_RESULT_OK;
-
- if (dictionarySize == 0)
- {
- dictionary = tempDictionary;
- dictionarySize = 1;
- tempDictionary[0] = vs->TempDictionary[0];
- }
-
- if (len == kLzmaNeedInitId)
- {
- {
- UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
- UInt32 i;
- for (i = 0; i < numProbs; i++)
- p[i] = kBitModelTotal >> 1;
- rep0 = rep1 = rep2 = rep3 = 1;
- state = 0;
- globalPos = 0;
- distanceLimit = 0;
- dictionaryPos = 0;
- dictionary[dictionarySize - 1] = 0;
- #ifdef _LZMA_IN_CB
- RC_INIT;
- #else
- RC_INIT(inStream, inSize);
- #endif
- }
- len = 0;
- }
- while(len != 0 && nowPos < outSize)
- {
- UInt32 pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- outStream[nowPos++] = dictionary[dictionaryPos] = dictionary[pos];
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- len--;
- }
- if (dictionaryPos == 0)
- previousByte = dictionary[dictionarySize - 1];
- else
- previousByte = dictionary[dictionaryPos - 1];
-
- #else /* if !_LZMA_OUT_READ */
-
- int state = 0;
- UInt32 rep0 = 1, rep1 = 1, rep2 = 1, rep3 = 1;
- int len = 0;
- const Byte *Buffer;
- const Byte *BufferLim;
- UInt32 Range;
- UInt32 Code;
-
- #ifndef _LZMA_IN_CB
- *inSizeProcessed = 0;
- #endif
- *outSizeProcessed = 0;
-
- {
- UInt32 i;
- UInt32 numProbs = Literal + ((UInt32)LZMA_LIT_SIZE << (lc + vs->Properties.lp));
- for (i = 0; i < numProbs; i++)
- p[i] = kBitModelTotal >> 1;
- }
-
- #ifdef _LZMA_IN_CB
- RC_INIT;
- #else
- RC_INIT(inStream, inSize);
- #endif
-
- #endif /* _LZMA_OUT_READ */
-
- while(nowPos < outSize)
- {
- CProb *prob;
- UInt32 bound;
- int posState = (int)(
- (nowPos
- #ifdef _LZMA_OUT_READ
- + globalPos
- #endif
- )
- & posStateMask);
-
- prob = p + IsMatch + (state << kNumPosBitsMax) + posState;
- IfBit0(prob)
- {
- int symbol = 1;
- UpdateBit0(prob)
- prob = p + Literal + (LZMA_LIT_SIZE *
- (((
- (nowPos
- #ifdef _LZMA_OUT_READ
- + globalPos
- #endif
- )
- & literalPosMask) << lc) + (previousByte >> (8 - lc))));
-
- if (state >= kNumLitStates)
- {
- int matchByte;
- #ifdef _LZMA_OUT_READ
- UInt32 pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- matchByte = dictionary[pos];
- #else
- matchByte = outStream[nowPos - rep0];
- #endif
- do
- {
- int bit;
- CProb *probLit;
- matchByte <<= 1;
- bit = (matchByte & 0x100);
- probLit = prob + 0x100 + bit + symbol;
- RC_GET_BIT2(probLit, symbol, if (bit != 0) break, if (bit == 0) break)
- }
- while (symbol < 0x100);
- }
- while (symbol < 0x100)
- {
- CProb *probLit = prob + symbol;
- RC_GET_BIT(probLit, symbol)
- }
- previousByte = (Byte)symbol;
-
- outStream[nowPos++] = previousByte;
- #ifdef _LZMA_OUT_READ
- if (distanceLimit < dictionarySize)
- distanceLimit++;
-
- dictionary[dictionaryPos] = previousByte;
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- #endif
- if (state < 4) state = 0;
- else if (state < 10) state -= 3;
- else state -= 6;
- }
- else
- {
- UpdateBit1(prob);
- prob = p + IsRep + state;
- IfBit0(prob)
- {
- UpdateBit0(prob);
- rep3 = rep2;
- rep2 = rep1;
- rep1 = rep0;
- state = state < kNumLitStates ? 0 : 3;
- prob = p + LenCoder;
- }
- else
- {
- UpdateBit1(prob);
- prob = p + IsRepG0 + state;
- IfBit0(prob)
- {
- UpdateBit0(prob);
- prob = p + IsRep0Long + (state << kNumPosBitsMax) + posState;
- IfBit0(prob)
- {
- #ifdef _LZMA_OUT_READ
- UInt32 pos;
- #endif
- UpdateBit0(prob);
-
- #ifdef _LZMA_OUT_READ
- if (distanceLimit == 0)
- #else
- if (nowPos == 0)
- #endif
- {
-#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE)
- printf("ERROR: %s, %d\n", __FILE__, __LINE__);
-#endif
- return LZMA_RESULT_DATA_ERROR;
- }
-
- state = state < kNumLitStates ? 9 : 11;
- #ifdef _LZMA_OUT_READ
- pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- previousByte = dictionary[pos];
- dictionary[dictionaryPos] = previousByte;
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- #else
- previousByte = outStream[nowPos - rep0];
- #endif
- outStream[nowPos++] = previousByte;
- #ifdef _LZMA_OUT_READ
- if (distanceLimit < dictionarySize)
- distanceLimit++;
- #endif
-
- continue;
- }
- else
- {
- UpdateBit1(prob);
- }
- }
- else
- {
- UInt32 distance;
- UpdateBit1(prob);
- prob = p + IsRepG1 + state;
- IfBit0(prob)
- {
- UpdateBit0(prob);
- distance = rep1;
- }
- else
- {
- UpdateBit1(prob);
- prob = p + IsRepG2 + state;
- IfBit0(prob)
- {
- UpdateBit0(prob);
- distance = rep2;
- }
- else
- {
- UpdateBit1(prob);
- distance = rep3;
- rep3 = rep2;
- }
- rep2 = rep1;
- }
- rep1 = rep0;
- rep0 = distance;
- }
- state = state < kNumLitStates ? 8 : 11;
- prob = p + RepLenCoder;
- }
- {
- int numBits, offset;
- CProb *probLen = prob + LenChoice;
- IfBit0(probLen)
- {
- UpdateBit0(probLen);
- probLen = prob + LenLow + (posState << kLenNumLowBits);
- offset = 0;
- numBits = kLenNumLowBits;
- }
- else
- {
- UpdateBit1(probLen);
- probLen = prob + LenChoice2;
- IfBit0(probLen)
- {
- UpdateBit0(probLen);
- probLen = prob + LenMid + (posState << kLenNumMidBits);
- offset = kLenNumLowSymbols;
- numBits = kLenNumMidBits;
- }
- else
- {
- UpdateBit1(probLen);
- probLen = prob + LenHigh;
- offset = kLenNumLowSymbols + kLenNumMidSymbols;
- numBits = kLenNumHighBits;
- }
- }
- RangeDecoderBitTreeDecode(probLen, numBits, len);
- len += offset;
- }
-
- if (state < 4)
- {
- int posSlot;
- state += kNumLitStates;
- prob = p + PosSlot +
- ((len < kNumLenToPosStates ? len : kNumLenToPosStates - 1) <<
- kNumPosSlotBits);
- RangeDecoderBitTreeDecode(prob, kNumPosSlotBits, posSlot);
- if (posSlot >= kStartPosModelIndex)
- {
- int numDirectBits = ((posSlot >> 1) - 1);
- rep0 = (2 | ((UInt32)posSlot & 1));
- if (posSlot < kEndPosModelIndex)
- {
- rep0 <<= numDirectBits;
- prob = p + SpecPos + rep0 - posSlot - 1;
- }
- else
- {
- numDirectBits -= kNumAlignBits;
- do
- {
- RC_NORMALIZE
- Range >>= 1;
- rep0 <<= 1;
- if (Code >= Range)
- {
- Code -= Range;
- rep0 |= 1;
- }
- }
- while (--numDirectBits != 0);
- prob = p + Align;
- rep0 <<= kNumAlignBits;
- numDirectBits = kNumAlignBits;
- }
- {
- int i = 1;
- int mi = 1;
- do
- {
- CProb *prob3 = prob + mi;
- RC_GET_BIT2(prob3, mi, ; , rep0 |= i);
- i <<= 1;
- }
- while(--numDirectBits != 0);
- }
- }
- else
- rep0 = posSlot;
- if (++rep0 == (UInt32)(0))
- {
- /* it's for stream version */
- len = kLzmaStreamWasFinishedId;
- break;
- }
- }
-
- len += kMatchMinLen;
- #ifdef _LZMA_OUT_READ
- if (rep0 > distanceLimit)
- #else
- if (rep0 > nowPos)
- #endif
- {
-#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE)
- printf("ERROR: %s, %d\n", __FILE__, __LINE__);
-#endif
- return LZMA_RESULT_DATA_ERROR;
- }
-
- #ifdef _LZMA_OUT_READ
- if (dictionarySize - distanceLimit > (UInt32)len)
- distanceLimit += len;
- else
- distanceLimit = dictionarySize;
- #endif
-
- do
- {
- #ifdef _LZMA_OUT_READ
- UInt32 pos = dictionaryPos - rep0;
- if (pos >= dictionarySize)
- pos += dictionarySize;
- previousByte = dictionary[pos];
- dictionary[dictionaryPos] = previousByte;
- if (++dictionaryPos == dictionarySize)
- dictionaryPos = 0;
- #else
- previousByte = outStream[nowPos - rep0];
- #endif
- len--;
- outStream[nowPos++] = previousByte;
- }
- while(len != 0 && nowPos < outSize);
- }
- }
- RC_NORMALIZE;
-
- #ifdef _LZMA_OUT_READ
- vs->Range = Range;
- vs->Code = Code;
- vs->DictionaryPos = dictionaryPos;
- vs->GlobalPos = globalPos + (UInt32)nowPos;
- vs->DistanceLimit = distanceLimit;
- vs->Reps[0] = rep0;
- vs->Reps[1] = rep1;
- vs->Reps[2] = rep2;
- vs->Reps[3] = rep3;
- vs->State = state;
- vs->RemainLen = len;
- vs->TempDictionary[0] = tempDictionary[0];
- #endif
-
- #ifdef _LZMA_IN_CB
- vs->Buffer = Buffer;
- vs->BufferLim = BufferLim;
- #else
- *inSizeProcessed = (SizeT)(Buffer - inStream);
- #endif
- *outSizeProcessed = nowPos;
- return LZMA_RESULT_OK;
-}
-
-#endif /* CONFIG_LZMA */
+++ /dev/null
-/******************************************************************************
-**
-** FILE NAME : LzmaWrapper.c
-** PROJECT : bootloader
-** MODULES : U-boot
-**
-** DATE : 2 Nov 2006
-** AUTHOR : Lin Mars
-** DESCRIPTION : LZMA decoder support for U-boot 1.1.5
-** COPYRIGHT : Copyright (c) 2006
-** Infineon Technologies AG
-** Am Campeon 1-12, 85579 Neubiberg, Germany
-**
-** This program is free software; you can redistribute it and/or modify
-** it under the terms of the GNU General Public License as published by
-** the Free Software Foundation; either version 2 of the License, or
-** (at your option) any later version.
-**
-** HISTORY
-** $Date $Author $Comment
-** 2 Nov 2006 Lin Mars init version which derived from LzmaTest.c from
-** LZMA v4.43 SDK
-** 24 May 2007 Lin Mars Fix issue for multiple lzma_inflate involved
-*******************************************************************************/
-#define LZMA_NO_STDIO
-#ifndef LZMA_NO_STDIO
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#endif
-
-#include <config.h>
-#include <common.h>
-#include <linux/types.h>
-#include <linux/string.h>
-#include <linux/ctype.h>
-#include <malloc.h>
-
-#ifdef CONFIG_LZMA
-
-#include "LzmaDecode.h"
-#include "LzmaWrapper.h"
-
-#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE)
-static const char *kCantReadMessage = "Can not read from source buffer";
-static const char *kCantAllocateMessage = "Not enough buffer for decompression";
-#endif
-
-static size_t rpos=0, dpos=0;
-
-static int MyReadFileAndCheck(unsigned char *src, void *dest, size_t size)
-{
- if (size == 0)
- return 0;
- memcpy(dest, src + rpos, size);
- rpos += size;
- return 1;
-}
-
-int lzma_inflate(unsigned char *source, int s_len, unsigned char *dest, int *d_len)
-{
- /* We use two 32-bit integers to construct 64-bit integer for file size.
- You can remove outSizeHigh, if you don't need >= 4GB supporting,
- or you can use UInt64 outSize, if your compiler supports 64-bit integers*/
- UInt32 outSize = 0;
- UInt32 outSizeHigh = 0;
- SizeT outSizeFull;
- unsigned char *outStream;
-
- int waitEOS = 1;
- /* waitEOS = 1, if there is no uncompressed size in headers,
- so decoder will wait EOS (End of Stream Marker) in compressed stream */
-
- SizeT compressedSize;
- unsigned char *inStream;
-
- CLzmaDecoderState state; /* it's about 24-80 bytes structure, if int is 32-bit */
- unsigned char properties[LZMA_PROPERTIES_SIZE];
-
- int res;
-
- rpos=0; dpos=0;
-
- if (sizeof(UInt32) < 4)
- {
-#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE)
- printf("LZMA decoder needs correct UInt32\n");
-#endif
- return LZMA_RESULT_DATA_ERROR;
- }
-
- {
- long length=s_len;
- if ((long)(SizeT)length != length)
- {
-#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE)
- printf("Too big compressed stream\n");
-#endif
- return LZMA_RESULT_DATA_ERROR;
- }
- compressedSize = (SizeT)(length - (LZMA_PROPERTIES_SIZE + 8));
- }
-
- /* Read LZMA properties for compressed stream */
-
- if (!MyReadFileAndCheck(source, properties, sizeof(properties)))
- {
-#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE)
- printf("%s\n", kCantReadMessage);
-#endif
- return LZMA_RESULT_DATA_ERROR;
- }
-
- /* Read uncompressed size */
- {
- int i;
- for (i = 0; i < 8; i++)
- {
- unsigned char b;
- if (!MyReadFileAndCheck(source, &b, 1))
- {
-#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE)
- printf("%s\n", kCantReadMessage);
-#endif
- return LZMA_RESULT_DATA_ERROR;
- }
- if (b != 0xFF)
- waitEOS = 0;
- if (i < 4)
- outSize += (UInt32)(b) << (i * 8);
- else
- outSizeHigh += (UInt32)(b) << ((i - 4) * 8);
- }
-
- if (waitEOS)
- {
-#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE)
- printf("Stream with EOS marker is not supported");
-#endif
- return LZMA_RESULT_DATA_ERROR;
- }
- outSizeFull = (SizeT)outSize;
- if (sizeof(SizeT) >= 8)
- outSizeFull |= (((SizeT)outSizeHigh << 16) << 16);
- else if (outSizeHigh != 0 || (UInt32)(SizeT)outSize != outSize)
- {
-#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE)
- printf("Too big uncompressed stream");
-#endif
- return LZMA_RESULT_DATA_ERROR;
- }
- }
-
- /* Decode LZMA properties and allocate memory */
- if (LzmaDecodeProperties(&state.Properties, properties, LZMA_PROPERTIES_SIZE) != LZMA_RESULT_OK)
- {
-#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE)
- printf("Incorrect stream properties");
-#endif
- return LZMA_RESULT_DATA_ERROR;
- }
- state.Probs = (CProb *)malloc(LzmaGetNumProbs(&state.Properties) * sizeof(CProb));
-
- if (outSizeFull == 0)
- outStream = 0;
- else
- {
- if (outSizeFull > d_len)
- outStream = 0;
- else
- outStream = dest;
- }
-
- if (compressedSize == 0)
- inStream = 0;
- else
- {
- if ((compressedSize+rpos) > s_len )
- inStream = 0;
- else
- inStream = source + rpos;
- }
-
- if (state.Probs == 0
- || (outStream == 0 && outSizeFull != 0)
- || (inStream == 0 && compressedSize != 0)
- )
- {
- free(state.Probs);
-#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE)
- printf("%s\n", kCantAllocateMessage);
-#endif
- return LZMA_RESULT_DATA_ERROR;
- }
-
- /* Decompress */
- {
- SizeT inProcessed;
- SizeT outProcessed;
- res = LzmaDecode(&state,
- inStream, compressedSize, &inProcessed,
- outStream, outSizeFull, &outProcessed);
- if (res != 0)
- {
-#if defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF) || !defined(CFG_BOOTSTRAP_CODE)
- printf("\nDecoding error = %d\n", res);
-#endif
- res = 1;
- }
- else
- {
- *d_len = outProcessed;
- }
- }
-
- free(state.Probs);
- return res;
-}
-
-#endif /* CONFIG_LZMA */
+++ /dev/null
-
-#define IFX_ETH_INITIALIZE_EXTERN extern int danube_switch_initialize(bd_t *);
-#define IFX_ETH_INITIALIZE(bd_t) danube_switch_initialize(bd_t);
-
+++ /dev/null
---- a/Makefile
-+++ b/Makefile
-@@ -275,10 +275,10 @@ $(U_BOOT_NAND): $(NAND_SPL) $(obj)u-boot
- cat nand_spl/u-boot-spl-16k.bin $(obj)u-boot.bin > $(obj)u-boot-nand.bin
-
- version:
-- @echo -n "#define U_BOOT_VERSION \"U-Boot " > $(VERSION_FILE); \
-- echo -n "$(U_BOOT_VERSION)" >> $(VERSION_FILE); \
-- echo -n $(shell $(CONFIG_SHELL) $(TOPDIR)/tools/setlocalversion \
-- $(TOPDIR)) >> $(VERSION_FILE); \
-+ @printf "#define U_BOOT_VERSION \"U-Boot " > $(VERSION_FILE); \
-+ printf "$(U_BOOT_VERSION)" >> $(VERSION_FILE); \
-+ printf "$(shell $(CONFIG_SHELL) $(TOPDIR)/tools/setlocalversion \
-+ $(TOPDIR))" >> $(VERSION_FILE); \
- echo "\"" >> $(VERSION_FILE)
-
- gdbtools:
-@@ -1593,10 +1593,10 @@ MPC8540EVAL_66_slave_config: unconf
- @mkdir -p $(obj)include
- @echo "" >$(obj)include/config.h ; \
- if [ "$(findstring _33_,$@)" ] ; then \
-- echo -n "... 33 MHz PCI" ; \
-+ printf "... 33 MHz PCI" ; \
- else \
- echo "#define CONFIG_SYSCLK_66M" >>$(obj)include/config.h ; \
-- echo -n "... 66 MHz PCI" ; \
-+ printf "... 66 MHz PCI" ; \
- fi ; \
- if [ "$(findstring _slave_,$@)" ] ; then \
- echo "#define CONFIG_PCI_SLAVE" >>$(obj)include/config.h ; \
+++ /dev/null
---- a/Makefile
-+++ b/Makefile
-@@ -24,7 +24,7 @@
- VERSION = 1
- PATCHLEVEL = 1
- SUBLEVEL = 5
--EXTRAVERSION =
-+EXTRAVERSION = -IFX-LXDB
- U_BOOT_VERSION = $(VERSION).$(PATCHLEVEL).$(SUBLEVEL)$(EXTRAVERSION)
- VERSION_FILE = $(obj)include/version_autogenerated.h
-
-@@ -44,6 +44,25 @@ export HOSTARCH HOSTOS
- # Deal with colliding definitions from tcsh etc.
- VENDOR=
-
-+# Default algorithm form compressing u-boot.bin
-+ifndef COMPRESS
-+COMPRESS=none
-+COMPRESS_FILE=$(obj)u-boot.img
-+else
-+ifeq ($(COMPRESS),lzma)
-+COMPRESS_FILE=$(obj)u-boot.limg
-+endif
-+ifeq ($(COMPRESS),bz2)
-+COMPRESS_FILE=$(obj)u-boot.bzimg
-+endif
-+ifeq ($(COMPRESS),gzip)
-+COMPRESS_FILE=$(obj)u-boot.zimg
-+endif
-+ifeq ($(COMPRESS),none)
-+COMPRESS_FILE=$(obj)u-boot.img
-+endif
-+endif
-+
- #########################################################################
- #
- # U-boot build supports producing a object files to the separate external
-@@ -164,6 +183,11 @@ include $(TOPDIR)/config.mk
- # U-Boot objects....order is important (i.e. start must be first)
-
- OBJS = cpu/$(CPU)/start.o
-+OBJS_BOOTSTRAP = cpu/$(CPU)/start_bootstrap.o
-+
-+cpu/$(CPU)/start_bootstrap.S: cpu/$(CPU)/start.S
-+ ln -s start.S cpu/$(CPU)/start_bootstrap.S
-+
- ifeq ($(CPU),i386)
- OBJS += cpu/$(CPU)/start16.o
- OBJS += cpu/$(CPU)/reset.o
-@@ -183,6 +207,7 @@ OBJS += cpu/$(CPU)/cplbhdlr.o cpu/$(CPU)
- endif
-
- OBJS := $(addprefix $(obj),$(OBJS))
-+OBJS_BOOTSTRAP := $(addprefix $(obj),$(OBJS_BOOTSTRAP))
-
- LIBS = lib_generic/libgeneric.a
- LIBS += board/$(BOARDDIR)/lib$(BOARD).a
-@@ -206,15 +231,24 @@ LIBS += common/libcommon.a
- LIBS += $(BOARDLIBS)
-
- LIBS := $(addprefix $(obj),$(LIBS))
-+
-+LIBS_BOOTSTRAP = lib_bootstrap/libbootstrap.a
-+LIBS_BOOTSTRAP+= board/$(BOARDDIR)/lib$(BOARD).a
-+#LIBS_BOOTSTRAP+= board/ifx/libifx.a
-+LIBS_BOOTSTRAP+= cpu/$(CPU)/lib$(CPU).a
-+
-+LIBS_BOOTSTRAP := $(addprefix $(obj),$(LIBS_BOOTSTRAP))
-+
- .PHONY : $(LIBS)
-+.PHONY : $(obj)lib_bootstrap/libbootstrap.a
-
- # Add GCC lib
- PLATFORM_LIBS += -L $(shell dirname `$(CC) $(CFLAGS) -print-libgcc-file-name`) -lgcc
-
- # The "tools" are needed early, so put this first
- # Don't include stuff already done in $(LIBS)
-+ #examples
- SUBDIRS = tools \
-- examples \
- post \
- post/cpu
- .PHONY : $(SUBDIRS)
-@@ -226,14 +260,75 @@ endif
-
- __OBJS := $(subst $(obj),,$(OBJS))
- __LIBS := $(subst $(obj),,$(LIBS))
-+__LIBS_BOOTSTRAP := $(subst $(obj),,$(LIBS_BOOTSTRAP))
-+
-+#__HEAD_OBJS := $(subst $(obj),,$(HEAD_OBJS))
-+#__HEAD_LIBS := $(subst $(obj),,$(HEAD_LIBS))
-
- #########################################################################
- #########################################################################
-
- ALL = $(obj)u-boot.srec $(obj)u-boot.bin $(obj)System.map $(U_BOOT_NAND)
-+#IFX_ALL = $(obj)u-boot.ifx $(obj)head.srec $(obj)head.bin $(obj)head $(obj)head.map $(COMPRESS_FILE) $(obj)u-boot.srec
-+IFX_ALL = $(obj)u-boot.srec $(obj)u-boot.ifx $(obj)u-boot.lzimg $(obj)System.map $(obj)bootstrap.bin $(obj)System_bootstrap.map
-+IFX_BOOTSTRAP = $(obj)bootstrap.bin
-
- all: $(ALL)
-
-+ifx_all: $(IFX_ALL)
-+
-+ifx_bootstrap: $(IFX_BOOTSTRAP)
-+
-+$(obj)u-boot.ifx: $(obj)bootstrap.bin $(obj)u-boot.lzimg
-+ @cat $(obj)bootstrap.bin > $(obj)u-boot.ifx
-+ @cat $(obj)u-boot.lzimg >> $(obj)u-boot.ifx
-+
-+$(obj)u-boot.lzimg: $(obj)u-boot.bin $(obj)System.map
-+ @lzma e $(obj)u-boot.bin $(obj)u-boot.lzma
-+ $(obj)tools/mkimage -A mips -T firmware -C lzma \
-+ -a 0x$(shell grep "T _start" $(obj)System.map | awk '{ printf "%s", $$1 }') \
-+ -e 0x$(shell grep "T _start" $(obj)System.map | awk '{ printf "%s", $$1 }') \
-+ -n 'u-boot image' -d $(obj)u-boot.lzma $@
-+
-+$(obj)ld_uboot.img: $(obj)u-boot.ifx $(obj)u-boot.lzimg $(obj)bootstrap.bin
-+ @ cp -f $(obj)u-boot.ifx $(obj)u-boot.bin
-+ @ ./mkbootimg.incaip2 $(obj)ld_uboot.img < ld_uboot.conf
-+
-+$(obj)u-boot.zimg: $(obj)u-boot.bin $(obj)System.map
-+ gzip $(obj)u-boot.bin
-+ $(obj)tools/mkimage -A $(ARCH) -T firmware -C gzip \
-+ -a 0x$(shell grep "T _start" $(obj)System.map | awk '{ printf "%s", $$1 }') \
-+ -e 0x$(shell grep "T _start" $(obj)System.map | awk '{ printf "%s", $$1 }') \
-+ -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
-+ sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-+ -d u-boot.gz $@
-+
-+$(obj)u-boot.bzimg: $(obj)u-boot.bin $(obj)System.map
-+ bzip $(obj)u-boot.bin
-+ $(obj)tools/mkimage -A $(ARCH) -T firmware -C bzip2 \
-+ -a 0x$(shell grep "T _start" $(obj)System.map | awk '{ printf "%s", $$1 }') \
-+ -e 0x$(shell grep "T _start" $(obj)System.map | awk '{ printf "%s", $$1 }') \
-+ -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
-+ sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-+ -d u-boot.bz2 $@
-+
-+$(obj)u-boot.limg: $(obj)u-boot.bin $(obj)System.map
-+ @lzma e $(obj)u-boot.bin $(obj)u-boot.lzma
-+ $(obj)tools/mkimage -A $(ARCH) -T firmware -C lzma \
-+ -a 0x$(shell grep "T _start" $(obj)System.map | awk '{ printf "%s", $$1 }') \
-+ -e 0x$(shell grep "T _start" $(obj)System.map | awk '{ printf "%s", $$1 }') \
-+ -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
-+ sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-+ -d u-boot.lzma $@
-+
-+$(obj)u-boot.img: $(obj)u-boot.bin $(obj)System.map
-+ $(obj)tools/mkimage -A $(ARCH) -T firmware -C none \
-+ -a 0x$(shell grep "T _start" $(obj)System.map | awk '{ printf "%s", $$1 }') \
-+ -e 0x$(shell grep "T _start" $(obj)System.map | awk '{ printf "%s", $$1 }') \
-+ -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
-+ sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-+ -d u-boot.bin $@
-+
- $(obj)u-boot.hex: $(obj)u-boot
- $(OBJCOPY) ${OBJCFLAGS} -O ihex $< $@
-
-@@ -243,28 +338,33 @@ $(obj)u-boot.srec: $(obj)u-boot
- $(obj)u-boot.bin: $(obj)u-boot
- $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
-
--$(obj)u-boot.img: $(obj)u-boot.bin
-- ./tools/mkimage -A $(ARCH) -T firmware -C none \
-- -a $(TEXT_BASE) -e 0 \
-- -n $(shell sed -n -e 's/.*U_BOOT_VERSION//p' $(VERSION_FILE) | \
-- sed -e 's/"[ ]*$$/ for $(BOARD) board"/') \
-- -d $< $@
--
- $(obj)u-boot.dis: $(obj)u-boot
- $(OBJDUMP) -d $< > $@
-
--$(obj)u-boot: depend version $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT)
-+$(obj)u-boot: depend version $(SUBDIRS) $(OBJS) $(LIBS) $(LDSCRIPT)
- UNDEF_SYM=`$(OBJDUMP) -x $(LIBS) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
- cd $(LNDIR) && $(LD) $(LDFLAGS) $$UNDEF_SYM $(__OBJS) \
- --start-group $(__LIBS) --end-group $(PLATFORM_LIBS) \
- -Map u-boot.map -o u-boot
-
-+$(obj)bootstrap.bin: $(obj)bootstrap
-+ $(OBJCOPY) ${OBJCFLAGS} -O binary $< $@
-+
-+$(obj)bootstrap : depend version $(SUBDIRS) $(OBJS_BOOTSTRAP) $(LIBS_BOOTSTRAP) $(LDSCRIPT_BOOTSTRAP)
-+ UNDEF_SYM=`$(OBJDUMP) -x $(LIBS_BOOTSTRAP) |sed -n -e 's/.*\(__u_boot_cmd_.*\)/-u\1/p'|sort|uniq`;\
-+ $(LD) $(LDFLAGS_BOOTSTRAP) $$UNDEF_SYM $(OBJS_BOOTSTRAP) \
-+ --start-group $(__LIBS_BOOTSTRAP) --end-group $(PLATFORM_LIBS) \
-+ -Map bootstrap.map -o bootstrap
-+
- $(OBJS):
- $(MAKE) -C cpu/$(CPU) $(if $(REMOTE_BUILD),$@,$(notdir $@))
-
- $(LIBS):
- $(MAKE) -C $(dir $(subst $(obj),,$@))
-
-+$(obj)lib_bootstrap/libbootstrap.a:
-+ $(MAKE) -C $(dir $(subst $(obj),,$@))
-+
- $(SUBDIRS):
- $(MAKE) -C $@ all
-
-@@ -310,7 +410,12 @@ etags:
- $(obj)System.map: $(obj)u-boot
- @$(NM) $< | \
- grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
-- sort > $(obj)System.map
-+ sort > $@
-+
-+$(obj)System_bootstrap.map: $(obj)bootstrap
-+ @$(NM) $< | \
-+ grep -v '\(compiled\)\|\(\.o$$\)\|\( [aUw] \)\|\(\.\.ng$$\)\|\(LASH[RL]DI\)' | \
-+ sort > $@
-
- #########################################################################
- else
-@@ -2032,7 +2137,20 @@ sc520_spunk_rel_config : unconfig
- # MIPS
- #========================================================================
- #########################################################################
--## MIPS32 4Kc
-+## Infineon MIPS generic u-boot config
-+#########################################################################
-+danube_config: unconfig
-+ @$(MKCONFIG) $(@:_config=) mips mips danube ifx danube
-+
-+amazon_config: unconfig
-+ @$(MKCONFIG) $(@:_config=) mips mips amazon
-+
-+
-+incaip2_config: unconfig
-+ @$(MKCONFIG) $(@:_config=) mips mips incaip2
-+
-+#########################################################################
-+## MIPS32 4kc
- #########################################################################
-
- xtract_incaip = $(subst _100MHz,,$(subst _133MHz,,$(subst _150MHz,,$(subst _config,,$1))))
-@@ -2254,7 +2372,7 @@ clobber: clean
- | xargs -0 rm -f
- rm -f $(OBJS) $(obj)*.bak $(obj)ctags $(obj)etags $(obj)TAGS $(obj)include/version_autogenerated.h
- rm -fr $(obj)*.*~
-- rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL)
-+ rm -f $(obj)u-boot $(obj)u-boot.map $(obj)u-boot.hex $(ALL) $(IFX_ALL)
- rm -f $(obj)tools/crc32.c $(obj)tools/environment.c $(obj)tools/env/crc32.c
- rm -f $(obj)tools/inca-swap-bytes $(obj)cpu/mpc824x/bedbug_603e.c
- rm -f $(obj)include/asm/proc $(obj)include/asm/arch $(obj)include/asm
---- a/common/cmd_bootm.c
-+++ b/common/cmd_bootm.c
-@@ -31,6 +31,7 @@
- #include <malloc.h>
- #include <zlib.h>
- #include <bzlib.h>
-+#include <LzmaWrapper.h>
- #include <environment.h>
- #include <asm/byteorder.h>
-
-@@ -79,6 +80,8 @@ DECLARE_GLOBAL_DATA_PTR;
- # define CHUNKSZ (64 * 1024)
- #endif
-
-+#ifndef CFG_HEAD_CODE
-+
- int gunzip (void *, int, unsigned char *, unsigned long *);
-
- static void *zalloc(void *, unsigned, unsigned);
-@@ -341,6 +344,7 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag
- #endif /* CONFIG_HW_WATCHDOG || CONFIG_WATCHDOG */
- }
- break;
-+#ifndef CONFIG_REMOVE_GZIP
- case IH_COMP_GZIP:
- printf (" Uncompressing %s ... ", name);
- if (gunzip ((void *)ntohl(hdr->ih_load), unc_len,
-@@ -350,6 +354,7 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag
- do_reset (cmdtp, flag, argc, argv);
- }
- break;
-+#endif /* CONFIG_REMOVE_GZIP */
- #ifdef CONFIG_BZIP2
- case IH_COMP_BZIP2:
- printf (" Uncompressing %s ... ", name);
-@@ -369,6 +374,18 @@ int do_bootm (cmd_tbl_t *cmdtp, int flag
- }
- break;
- #endif /* CONFIG_BZIP2 */
-+#ifdef CONFIG_LZMA
-+ case IH_COMP_LZMA:
-+ printf (" Uncompressing %s ... ", name);
-+ i = lzma_inflate ((unsigned char *)data, len, (unsigned char*)ntohl(hdr->ih_load), &unc_len);
-+ if (i != LZMA_RESULT_OK) {
-+ printf ("LZMA ERROR %d - must RESET board to recover\n", i);
-+ SHOW_BOOT_PROGRESS (-6);
-+ udelay(100000);
-+ do_reset (cmdtp, flag, argc, argv);
-+ }
-+ break;
-+#endif /* CONFIG_LZMA */
- default:
- if (iflag)
- enable_interrupts();
-@@ -1176,6 +1193,8 @@ U_BOOT_CMD(
- );
- #endif /* CFG_CMD_IMLS */
-
-+#endif /* ! CFG_HEAD_CODE */
-+
- void
- print_image_hdr (image_header_t *hdr)
- {
-@@ -1270,12 +1289,15 @@ print_type (image_header_t *hdr)
- case IH_COMP_NONE: comp = "uncompressed"; break;
- case IH_COMP_GZIP: comp = "gzip compressed"; break;
- case IH_COMP_BZIP2: comp = "bzip2 compressed"; break;
-+ case IH_COMP_LZMA: comp = "lzma compressed"; break;
- default: comp = "unknown compression"; break;
- }
-
- printf ("%s %s %s (%s)", arch, os, type, comp);
- }
-
-+#ifndef CFG_HEAD_CODE
-+
- #define ZALLOC_ALIGNMENT 16
-
- static void *zalloc(void *x, unsigned items, unsigned size)
-@@ -1427,3 +1449,5 @@ do_bootm_lynxkdi (cmd_tbl_t *cmdtp, int
- }
-
- #endif /* CONFIG_LYNXKDI */
-+
-+#endif /* ! CFG_HEAD_CODE */
---- a/common/cmd_flash.c
-+++ b/common/cmd_flash.c
-@@ -196,9 +196,17 @@ addr_spec(char *arg1, char *arg2, ulong
- }
-
- static int
--flash_fill_sect_ranges (ulong addr_first, ulong addr_last,
-- int *s_first, int *s_last,
-- int *s_count )
-+flash_fill_sect_ranges(
-+ ulong *addr_first_sect_start,
-+ ulong addr_first,
-+ ulong *addr_last_sect_end,
-+ ulong addr_last,
-+ int *s_first,
-+ int *s_last,
-+ int *bPartialStart,
-+ int *bPartialEnd,
-+ int *s_count,
-+ unsigned int bPartialErase)
- {
- flash_info_t *info;
- ulong bank;
-@@ -211,9 +219,7 @@ flash_fill_sect_ranges (ulong addr_first
- s_last [bank] = -1; /* last sector to erase */
- }
-
-- for (bank=0,info=&flash_info[0];
-- (bank < CFG_MAX_FLASH_BANKS) && (addr_first <= addr_last);
-- ++bank, ++info) {
-+ for (bank=0, info=&flash_info[0]; (bank < CFG_MAX_FLASH_BANKS) && (addr_first <= addr_last); ++bank, ++info) {
- ulong b_end;
- int sect;
- short s_end;
-@@ -225,7 +231,6 @@ flash_fill_sect_ranges (ulong addr_first
- b_end = info->start[0] + info->size - 1; /* bank end addr */
- s_end = info->sector_count - 1; /* last sector */
-
--
- for (sect=0; sect < info->sector_count; ++sect) {
- ulong end; /* last address in current sect */
-
-@@ -238,11 +243,21 @@ flash_fill_sect_ranges (ulong addr_first
-
- if (addr_first == info->start[sect]) {
- s_first[bank] = sect;
-+ } else if (addr_first > info->start[sect] && addr_first <= end && bPartialErase) {
-+ *addr_first_sect_start = info->start[sect];
-+ s_first[bank] = sect;
-+ *bPartialStart = 1;
- }
-+
- if (addr_last == end) {
- s_last[bank] = sect;
-+ } else if (addr_last >= info->start[sect] && addr_last < end && bPartialErase) {
-+ *addr_last_sect_end = end;
-+ s_last[bank] = sect;
-+ *bPartialEnd = 1;
- }
- }
-+
- if (s_first[bank] >= 0) {
- if (s_last[bank] < 0) {
- if (addr_last > b_end) {
-@@ -316,6 +331,8 @@ int do_flerase (cmd_tbl_t *cmdtp, int fl
- struct part_info *part;
- u8 dev_type, dev_num, pnum;
- #endif
-+ unsigned int bPartialErase = 0;
-+
- int rcode = 0;
-
- if (argc < 2) {
-@@ -369,7 +386,7 @@ int do_flerase (cmd_tbl_t *cmdtp, int fl
- }
- #endif
-
-- if (argc != 3) {
-+ if (argc != 4) {
- printf ("Usage:\n%s\n", cmdtp->usage);
- return 1;
- }
-@@ -397,11 +414,117 @@ int do_flerase (cmd_tbl_t *cmdtp, int fl
- return 1;
- }
-
-- rcode = flash_sect_erase(addr_first, addr_last);
-+ printf ("Erase Flash from 0x%08lx to 0x%08lx\n", addr_first, addr_last);
-+ if(argc == 4) {
-+ bPartialErase = simple_strtoul(argv[3], NULL, 10);
-+ }
-+
-+ rcode = flash_sect_erase(addr_first, addr_last, bPartialErase);
- return rcode;
- }
-
--int flash_sect_erase (ulong addr_first, ulong addr_last)
-+int flerase_Partial(
-+ ulong addr_first_sect_start,
-+ ulong addr_first,
-+ ulong addr_last_sect_end,
-+ ulong addr_last,
-+ flash_info_t *info,
-+ int first_sect,
-+ int last_sect,
-+ int bFirstPartial,
-+ int bLastPartial) {
-+ unsigned int firstMemLen = 0;
-+ unsigned int lastMemLen = 0;
-+ unsigned int sectMemLen = 0;
-+ uchar *pSavedFirstMem = NULL;
-+ uchar *pSavedLastMem = NULL;
-+ uchar *pSavedSectMem = NULL;
-+ int bSectPartial = 0;
-+ int rt_code = 0;
-+
-+ debug("%s ... 0x%08x, 0x%08x, 0x%08x, 0x%08x, 0x%p, %d, %d, %d, %d\n", __FUNCTION__, addr_first_sect_start, addr_first, addr_last_sect_end, addr_last, info, first_sect, last_sect, bFirstPartial, bLastPartial);
-+
-+ if (bFirstPartial && bLastPartial && (first_sect == last_sect))
-+ {
-+ ulong b_end = info->start[0] + info->size - 1;
-+ ulong end = (first_sect == (info->sector_count - 1)) ? b_end : info->start[first_sect + 1] - 1;
-+ sectMemLen = end - info->start[first_sect] + 1;
-+ pSavedSectMem = (uchar *)calloc(sectMemLen, sizeof(char));
-+ if (pSavedSectMem == NULL)
-+ {
-+ debug("calloc %u FAILED\n", sectMemLen);
-+ rt_code = 1;
-+ goto ret;
-+ }
-+ memset(pSavedSectMem, 0xff, sectMemLen);
-+ bSectPartial = 1;
-+ memcpy(pSavedSectMem, (uchar *)addr_first_sect_start, addr_first - addr_first_sect_start);
-+ memcpy(pSavedSectMem + (addr_last - info->start[first_sect]) + 1, addr_last + 1, end - addr_last);
-+ }
-+ else
-+ {
-+ if (bFirstPartial){
-+ firstMemLen = addr_first - addr_first_sect_start + 1;
-+ pSavedFirstMem = (uchar *)calloc(firstMemLen,sizeof(char));
-+ memcpy(pSavedFirstMem,(uchar *)addr_first_sect_start,firstMemLen - 1);
-+ }
-+ if (bLastPartial){
-+ lastMemLen = addr_last_sect_end - addr_last + 1;
-+ pSavedLastMem = (uchar *)calloc(lastMemLen,sizeof(char));
-+ memcpy(pSavedLastMem,(uchar *)addr_last + 1,lastMemLen - 1);
-+ }
-+ }
-+
-+ if (bFirstPartial){
-+ if(flash_erase (info, first_sect, first_sect)) {
-+ printf("%s ... Couldn't erase sector %d\n", __FUNCTION__, first_sect);
-+ rt_code = 1;
-+ goto ret;
-+ }
-+ debug("%s ... erase sector %d done!\n", __FUNCTION__, first_sect);
-+ }
-+
-+ if (bLastPartial && first_sect != last_sect){
-+ if(flash_erase (info, last_sect, last_sect)) {
-+ printf("%s ... Couldn't erase sector %d\n", __FUNCTION__, last_sect);
-+ rt_code = 1;
-+ goto ret;
-+ }
-+ debug("%s ... erase sector %d done!\n", __FUNCTION__, last_sect);
-+ }
-+
-+ if (bFirstPartial && bLastPartial && (first_sect == last_sect))
-+ {
-+ flash_write(pSavedSectMem, (uchar *)addr_first_sect_start, sectMemLen);
-+ debug("flash_write from 0x%08x with len %u\n", addr_first_sect_start, sectMemLen);
-+ }
-+ else
-+ {
-+ if (bFirstPartial){
-+ if(flash_write(pSavedFirstMem,(uchar *)addr_first_sect_start,firstMemLen - 1)) {
-+ printf("%s ... Couldn't write at 0x%08lx length %d\n", __FUNCTION__, addr_first_sect_start,firstMemLen - 1);
-+ rt_code = 1;
-+ goto ret;
-+ }
-+ }
-+ if (bLastPartial){
-+ if(flash_write(pSavedLastMem,(uchar *)addr_last + 1,lastMemLen - 1)) {
-+ printf("%s ... Couldn't write at 0x%08lx length %d\n", __FUNCTION__, addr_last, lastMemLen - 1);
-+ rt_code = 1;
-+ }
-+ }
-+ }
-+ret:
-+ if (bFirstPartial)
-+ free(pSavedFirstMem);
-+ if (bLastPartial)
-+ free(pSavedLastMem);
-+ if (bSectPartial)
-+ free(pSavedSectMem);
-+ return rt_code;
-+}
-+
-+int flash_sect_erase (ulong addr_first, ulong addr_last, unsigned int bPartialErase)
- {
- flash_info_t *info;
- ulong bank;
-@@ -413,27 +536,66 @@ int flash_sect_erase (ulong addr_first,
- int erased = 0;
- int planned;
- int rcode = 0;
--
-- rcode = flash_fill_sect_ranges (addr_first, addr_last,
-- s_first, s_last, &planned );
-+ int bPartialStart = 0; // Start sector has to be erased partially
-+ int bPartialEnd = 0; // End sector has to be erased partially
-+ ulong addr_first_sect_start = 0;// Sector start address of location addr_start
-+ ulong addr_last_sect_end = 0; // Sector end address of location addr_last
-+
-+ rcode = flash_fill_sect_ranges (
-+ &addr_first_sect_start,
-+ addr_first,
-+ &addr_last_sect_end,
-+ addr_last,
-+ s_first,
-+ s_last,
-+ &bPartialStart,
-+ &bPartialEnd,
-+ &planned,
-+ bPartialErase );
-
- if (planned && (rcode == 0)) {
-- for (bank=0,info=&flash_info[0];
-- (bank < CFG_MAX_FLASH_BANKS) && (rcode == 0);
-- ++bank, ++info) {
-+ for (bank=0, info=&flash_info[0]; (bank < CFG_MAX_FLASH_BANKS) && (rcode == 0); ++bank, ++info) {
-+ ulong b_end = info->start[0] + info->size - 1; /* bank end addr */
- if (s_first[bank]>=0) {
-- erased += s_last[bank] - s_first[bank] + 1;
-- debug ("Erase Flash from 0x%08lx to 0x%08lx "
-- "in Bank # %ld ",
-- info->start[s_first[bank]],
-- (s_last[bank] == info->sector_count) ?
-- info->start[0] + info->size - 1:
-- info->start[s_last[bank]+1] - 1,
-- bank+1);
-- rcode = flash_erase (info, s_first[bank], s_last[bank]);
-+ if(bPartialErase) {
-+ rcode = flerase_Partial(
-+ addr_first_sect_start,
-+ addr_first,
-+ addr_last_sect_end,
-+ addr_last,
-+ info,
-+ s_first[bank],
-+ s_last[bank],
-+ bPartialStart,
-+ bPartialEnd);
-+ }
-+
-+ //Erase full sectores
-+ if (bPartialStart)
-+ s_first[bank] += 1;
-+ if (bPartialEnd)
-+ s_last[bank] -= 1;
-+ if (s_last[bank] >= s_first[bank]) {
-+ erased += s_last[bank] - s_first[bank] + 1;
-+ debug ("Erase Flash from 0x%08lx to 0x%08lx in Bank # %ld ",
-+ info->start[s_first[bank]],
-+ (s_last[bank] == info->sector_count) ?
-+ info->start[0] + info->size - 1:
-+ info->start[s_last[bank]+1] - 1,
-+ bank + 1);
-+ rcode = flash_erase (info, s_first[bank], s_last[bank]);
-+ }
- }
- }
-- printf ("Erased %d sectors\n", erased);
-+
-+ if (erased && !bPartialErase) {
-+ printf ("Erased %d sectors\n", erased);
-+ } else if (bPartialErase){
-+ printf ("Partial erased from 0x%08lx to 0x%08lx\n", addr_first, addr_last);
-+ } else {
-+ printf ("Error: start and/or end address not on sector boundary\n");
-+ rcode = 1;
-+ }
- } else if (rcode == 0) {
- puts ("Error: start and/or end address"
- " not on sector boundary\n");
-@@ -629,8 +791,22 @@ int flash_sect_protect (int p, ulong add
- int protected, i;
- int planned;
- int rcode;
--
-- rcode = flash_fill_sect_ranges( addr_first, addr_last, s_first, s_last, &planned );
-+ int bPartialStart = 0; // Start sector has to be erased partially
-+ int bPartialEnd = 0; // End sector has to be erased partially
-+ ulong addr_first_sect_start = 0;// Sector start address of location addr_start
-+ ulong addr_last_sect_end = 0; // Sector end address of location addr_last
-+
-+ rcode = flash_fill_sect_ranges (
-+ &addr_first_sect_start,
-+ addr_first,
-+ &addr_last_sect_end,
-+ addr_last,
-+ s_first,
-+ s_last,
-+ &bPartialStart,
-+ &bPartialEnd,
-+ &planned,
-+ 1 );
-
- protected = 0;
-
-@@ -690,7 +866,7 @@ U_BOOT_CMD(
- );
-
- U_BOOT_CMD(
-- erase, 3, 1, do_flerase,
-+ erase, 4, 1, do_flerase,
- "erase - erase FLASH memory\n",
- "start end\n"
- " - erase FLASH from addr 'start' to addr 'end'\n"
---- a/common/cmd_nvedit.c
-+++ b/common/cmd_nvedit.c
-@@ -540,8 +540,19 @@ int do_saveenv (cmd_tbl_t *cmdtp, int fl
- extern char * env_name_spec;
-
- printf ("Saving Environment to %s...\n", env_name_spec);
--
-+#if 1
-+ if(saveenv() == 0) {
-+#ifdef UBOOT_ENV_COPY
-+ saveenv_copy();
-+#else
-+ ;
-+#endif //UBOOT_ENV_COPY
-+ } else
-+ return 1;
-+ return 0;
-+#else
- return (saveenv() ? 1 : 0);
-+#endif
- }
-
-
---- a/common/console.c
-+++ b/common/console.c
-@@ -324,7 +324,7 @@ inline void dbg(const char *fmt, ...)
- #endif
-
- /** U-Boot INIT FUNCTIONS *************************************************/
--
-+#ifndef CFG_HEAD_CODE
- int console_assign (int file, char *devname)
- {
- int flag, i;
-@@ -357,7 +357,7 @@ int console_assign (int file, char *devn
-
- return -1;
- }
--
-+#endif //CFG_HEAD_CODE
- /* Called before relocation - use serial functions */
- int console_init_f (void)
- {
-@@ -392,6 +392,7 @@ device_t *search_device (int flags, char
- }
- #endif /* CFG_CONSOLE_IS_IN_ENV || CONFIG_SPLASH_SCREEN */
-
-+#ifndef CFG_HEAD_CODE
- #ifdef CFG_CONSOLE_IS_IN_ENV
- /* Called after the relocation - use desired console functions */
- int console_init_r (void)
-@@ -570,3 +571,4 @@ int console_init_r (void)
- }
-
- #endif /* CFG_CONSOLE_IS_IN_ENV */
-+#endif //CFG_HEAD_CODE
---- a/common/devices.c
-+++ b/common/devices.c
-@@ -39,6 +39,7 @@ DECLARE_GLOBAL_DATA_PTR;
- list_t devlist = 0;
- device_t *stdio_devices[] = { NULL, NULL, NULL };
- char *stdio_names[MAX_FILES] = { "stdin", "stdout", "stderr" };
-+#ifndef CFG_HEAD_CODE
-
- #if defined(CONFIG_SPLASH_SCREEN) && !defined(CFG_DEVICE_NULLDEV)
- #define CFG_DEVICE_NULLDEV 1
-@@ -214,3 +215,5 @@ int devices_done (void)
-
- return 0;
- }
-+#endif //CFG_HEAD_CODE
-+
---- a/common/env_common.c
-+++ b/common/env_common.c
-@@ -219,7 +219,9 @@ void env_relocate (void)
- * We must allocate a buffer for the environment
- */
- env_ptr = (env_t *)malloc (CFG_ENV_SIZE);
-- DEBUGF ("%s[%d] malloced ENV at %p\n", __FUNCTION__,__LINE__,env_ptr);
-+ if(!env_ptr)
-+ DEBUGF ("malloc env_ptr error!!\n");
-+ DEBUGF ("%s[%d] malloced ENV at %p\n", __FUNCTION__, __LINE__, env_ptr);
- #endif
-
- /*
-@@ -227,6 +229,10 @@ void env_relocate (void)
- */
- env_get_char = env_get_char_memory;
-
-+ //leejack
-+ DEBUGF ("%s[%d] gd->env_valid=%d\n", __FUNCTION__, __LINE__, gd->env_valid);
-+ DEBUGF ("%s[%d] CFG_ENV_SIZE=%d\n", __FUNCTION__, __LINE__, CFG_ENV_SIZE);
-+
- if (gd->env_valid == 0) {
- #if defined(CONFIG_GTH) || defined(CFG_ENV_IS_NOWHERE) /* Environment not changable */
- puts ("Using default environment\n\n");
-@@ -242,18 +248,17 @@ void env_relocate (void)
- }
-
- memset (env_ptr, 0, sizeof(env_t));
-- memcpy (env_ptr->data,
-- default_environment,
-- sizeof(default_environment));
-+ memcpy (env_ptr->data, default_environment, sizeof(default_environment));
-+
- #ifdef CFG_REDUNDAND_ENVIRONMENT
- env_ptr->flags = 0xFF;
- #endif
- env_crc_update ();
- gd->env_valid = 1;
-- }
-- else {
-+ } else {
- env_relocate_spec ();
- }
-+
- gd->env_addr = (ulong)&(env_ptr->data);
-
- #ifdef CONFIG_AMIGAONEG3SE
---- a/common/env_flash.c
-+++ b/common/env_flash.c
-@@ -66,7 +66,6 @@ static env_t *flash_addr = (env_t *)CFG_
- #endif
-
- #else /* ! ENV_IS_EMBEDDED */
--
- env_t *env_ptr = (env_t *)CFG_ENV_ADDR;
- #ifdef CMD_SAVEENV
- static env_t *flash_addr = (env_t *)CFG_ENV_ADDR;
-@@ -201,6 +200,7 @@ int saveenv(void)
- debug (" %08lX ... %08lX ...",
- (ulong)&(flash_addr_new->data),
- sizeof(env_ptr->data)+(ulong)&(flash_addr_new->data));
-+
- if ((rc = flash_write((char *)env_ptr->data,
- (ulong)&(flash_addr_new->data),
- sizeof(env_ptr->data))) ||
-@@ -256,7 +256,6 @@ Done:
- #endif /* CMD_SAVEENV */
-
- #else /* ! CFG_ENV_ADDR_REDUND */
--
- int env_init(void)
- {
- #ifdef CONFIG_OMAP2420H4
-@@ -280,6 +279,52 @@ bad_flash:
-
- #ifdef CMD_SAVEENV
-
-+#ifdef UBOOT_ENV_COPY
-+int saveenv_copy(void) {
-+ uchar *env_buffer = (char *)env_ptr;
-+ char *kernel_addr;
-+ char *rootfs_addr;
-+ char *rootfs_size;
-+ ulong start_addr,end_addr,rootfs_end_addr;
-+ ulong flash_start;
-+
-+ kernel_addr = getenv("f_kernel_addr");
-+ end_addr = simple_strtoul(kernel_addr,NULL,16) - 1;
-+ start_addr = end_addr - CFG_ENV_SIZE - sizeof(UBOOTCONFIG_COPY_HEADER) + 1;
-+
-+ rootfs_addr = getenv("f_rootfs_addr");
-+ rootfs_size = getenv("f_rootfs_size");
-+ rootfs_end_addr = simple_strtoul(rootfs_addr,NULL,16) + simple_strtoul(rootfs_size,NULL,16);
-+
-+ if(rootfs_end_addr >= start_addr)
-+ {
-+ printf("Can not copy the environment at 0x%08lx as no space left.\nf_kernel_addr = 0x%08lx while rootfs_end_addr = 0x%08lx\n",start_addr,end_addr,rootfs_end_addr);
-+ return 1;
-+ }
-+
-+ debug ("Protect off %08lX ... %08lX\n", (ulong)rootfs_end_addr, end_addr);
-+ if (flash_sect_protect (0, rootfs_end_addr, end_addr))
-+ return 1;
-+
-+ //delete the old environment copy, if found
-+ flash_start = rootfs_end_addr;
-+ while(flash_start + sizeof(UBOOTCONFIG_COPY_HEADER) + ENV_SIZE < end_addr)
-+ {
-+ if(strncmp((char *)flash_start,UBOOTCONFIG_COPY_HEADER,sizeof(UBOOTCONFIG_COPY_HEADER)) == 0)
-+ {
-+ flash_sect_erase(flash_start,flash_start + sizeof(UBOOTCONFIG_COPY_HEADER),1);
-+ }
-+ flash_start += 1;
-+ }
-+ flash_sect_erase(start_addr,end_addr,1);
-+ flash_write(UBOOTCONFIG_COPY_HEADER,start_addr,sizeof(UBOOTCONFIG_COPY_HEADER));
-+ flash_write(env_buffer,start_addr + sizeof(UBOOTCONFIG_COPY_HEADER), CFG_ENV_SIZE);
-+ flash_sect_protect (1, rootfs_end_addr, end_addr);
-+ printf("saved copy of the env at 0x%08lx\n",start_addr);
-+ return 0;
-+}
-+#endif //UBOOT_ENV_COPY
-+
- int saveenv(void)
- {
- int len, rc;
-@@ -331,7 +376,7 @@ int saveenv(void)
- return 1;
-
- puts ("Erasing Flash...");
-- if (flash_sect_erase (flash_sect_addr, end_addr))
-+ if (flash_sect_erase (flash_sect_addr, end_addr, 1))
- return 1;
-
- puts ("Writing to Flash... ");
---- a/config.mk
-+++ b/config.mk
-@@ -127,10 +127,15 @@ OBJCOPY = $(CROSS_COMPILE)objcopy
- OBJDUMP = $(CROSS_COMPILE)objdump
- RANLIB = $(CROSS_COMPILE)RANLIB
-
-+ifneq (,$(findstring s,$(MAKEFLAGS)))
-+ARFLAGS = cr
-+else
- ARFLAGS = crv
-+endif
- RELFLAGS= $(PLATFORM_RELFLAGS)
- DBGFLAGS= -g # -DDEBUG
- OPTFLAGS= -Os #-fomit-frame-pointer
-+OWRT_FLAGS?=
- ifndef LDSCRIPT
- #LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds.debug
- ifeq ($(CONFIG_NAND_U_BOOT),y)
-@@ -139,12 +144,15 @@ else
- LDSCRIPT := $(TOPDIR)/board/$(BOARDDIR)/u-boot.lds
- endif
- endif
-+
-+LDSCRIPT_BOOTSTRAP := $(TOPDIR)/board/$(BOARDDIR)/u-boot-bootstrap.lds
-+
- OBJCFLAGS += --gap-fill=0xff
-
- gccincdir := $(shell $(CC) -print-file-name=include)
-
--CPPFLAGS := $(DBGFLAGS) $(OPTFLAGS) $(RELFLAGS) \
-- -D__KERNEL__ -DTEXT_BASE=$(TEXT_BASE) \
-+CPPFLAGS := $(DBGFLAGS) $(OPTFLAGS) $(RELFLAGS) $(OWRT_FLAGS) \
-+ -D__KERNEL__ -DUBOOT_RAM_TEXT_BASE=$(UBOOT_RAM_TEXT_BASE) \
-
- ifneq ($(OBJTREE),$(SRCTREE))
- CPPFLAGS += -I$(OBJTREE)/include2 -I$(OBJTREE)/include
-@@ -180,7 +188,8 @@ endif
-
- AFLAGS := $(AFLAGS_DEBUG) -D__ASSEMBLY__ $(CPPFLAGS)
-
--LDFLAGS += -Bstatic -T $(LDSCRIPT) -Ttext $(TEXT_BASE) $(PLATFORM_LDFLAGS)
-+LDFLAGS += -Bstatic -T $(LDSCRIPT) -Ttext $(UBOOT_RAM_TEXT_BASE) $(PLATFORM_LDFLAGS)
-+LDFLAGS_BOOTSTRAP += -Bstatic -T $(LDSCRIPT_BOOTSTRAP) -Ttext $(BOOTSTRAP_TEXT_BASE) $(PLATFORM_LDFLAGS)
-
- # Location of a usable BFD library, where we define "usable" as
- # "built for ${HOST}, supports ${TARGET}". Sensible values are
-@@ -214,12 +223,19 @@ endif
- export CONFIG_SHELL HPATH HOSTCC HOSTCFLAGS CROSS_COMPILE \
- AS LD CC CPP AR NM STRIP OBJCOPY OBJDUMP \
- MAKE
--export TEXT_BASE PLATFORM_CPPFLAGS PLATFORM_RELFLAGS CPPFLAGS CFLAGS AFLAGS
-+export UBOOT_RAM_TEXT_BASE BOOTSTRAP_TEXT_BASE PLATFORM_CPPFLAGS PLATFORM_RELFLAGS CPPFLAGS CFLAGS AFLAGS
-
- #########################################################################
-
- ifndef REMOTE_BUILD
-
-+%_bootstrap.s: %_bootstrap.S
-+ $(CPP) $(AFLAGS) -DCFG_BOOTSTRAP_CODE -o $@ $<
-+%_bootstrap.o: %_bootstrap.S
-+ $(CC) $(AFLAGS) -DCFG_BOOTSTRAP_CODE -c -o $@ $<
-+%_bootstrap.o: %_bootstrap.c
-+ $(CC) $(CFLAGS) -DCFG_BOOTSTRAP_CODE -c -o $@ $<
-+
- %.s: %.S
- $(CPP) $(AFLAGS) -o $@ $<
- %.o: %.S
-@@ -229,12 +245,20 @@ ifndef REMOTE_BUILD
-
- else
-
-+$(obj)%_bootstrap.s: %_bootstrap.S
-+ $(CPP) $(AFLAGS) -DCFG_BOOTSTRAP_CODE -o $@ $<
-+$(obj)%_bootstrap.o: %_bootstrap.S
-+ $(CC) $(AFLAGS) -DCFG_BOOTSTRAP_CODE -c -o $@ $<
-+$(obj)%_bootstrap.o: %_bootstrap.c
-+ $(CC) $(CFLAGS) -DCFG_BOOTSTRAP_CODE -c -o $@ $<
-+
- $(obj)%.s: %.S
- $(CPP) $(AFLAGS) -o $@ $<
- $(obj)%.o: %.S
- $(CC) $(AFLAGS) -c -o $@ $<
- $(obj)%.o: %.c
- $(CC) $(CFLAGS) -c -o $@ $<
-+
- endif
-
- #########################################################################
---- a/drivers/Makefile
-+++ b/drivers/Makefile
-@@ -50,7 +50,7 @@ COBJS = 3c589.o 5701rls.o ali512x.o \
- videomodes.o w83c553f.o \
- ks8695eth.o \
- pxa_pcmcia.o mpc8xx_pcmcia.o tqm8xx_pcmcia.o \
-- rpx_pcmcia.o
-+ rpx_pcmcia.o ifx_sw.o
-
- SRCS := $(COBJS:.o=.c)
- OBJS := $(addprefix $(obj),$(COBJS))
---- a/include/asm-mips/mipsregs.h
-+++ b/include/asm-mips/mipsregs.h
-@@ -48,6 +48,7 @@
- #define CP0_CAUSE $13
- #define CP0_EPC $14
- #define CP0_PRID $15
-+#define CP0_EBASE $15,1
- #define CP0_CONFIG $16
- #define CP0_LLADDR $17
- #define CP0_WATCHLO $18
-@@ -330,11 +331,32 @@ __BUILD_SET_CP0(config,CP0_CONFIG)
- # define KSU_USER 0x00000010
- # define KSU_SUPERVISOR 0x00000008
- # define KSU_KERNEL 0x00000000
-+#ifdef CONFIG_DANUBE /* MIPS 24KE */
-+/* bits 5 & 6 & 7: reserved */
-+/* bits 8~15: IM0~7 */
-+/* bits 16: reserved */
-+#define ST0_CEE 0x00020000
-+/* bits 18: always 0 */
-+#define ST0_NMI 0x00080000
-+#define ST0_SR 0x00100000
-+#define ST0_TS 0x00200000
-+#define ST0_BEV 0x00400000
-+/* bits 23: reserved */
-+#define ST0_MX 0x01000000
-+#define ST0_RE 0x02000000
-+#define ST0_FR 0x04000000
-+#define ST0_RP 0x08000000
-+#define ST0_CU0 0x10000000
-+#define ST0_CU1 0x20000000
-+#define ST0_CU2 0x40000000
-+#define ST0_CU3 0x80000000
-+#else
- #define ST0_UX 0x00000020
- #define ST0_SX 0x00000040
- #define ST0_KX 0x00000080
- #define ST0_DE 0x00010000
- #define ST0_CE 0x00020000
-+#endif
-
- /*
- * Bitfields in the R[23]000 cp0 status register.
-@@ -471,6 +493,14 @@ __BUILD_SET_CP0(config,CP0_CONFIG)
- #define CAUSEF_BD (1 << 31)
-
- /*
-+ * Bits in the coprocessor 0 EBase register
-+ */
-+#define EBASEB_CPUNUM 0
-+#define EBASEF_CPUNUM (0x3ff << EBASEB_CPUNUM)
-+#define EBASEB_EXPBASE 12
-+#define EBASEF_EXPBASE (0x3ffff << EBASEB_EXPBASE)
-+
-+/*
- * Bits in the coprozessor 0 config register.
- */
- #define CONF_CM_CACHABLE_NO_WA 0
-@@ -544,4 +574,10 @@ __BUILD_SET_CP0(config,CP0_CONFIG)
- #define CEB_KERNEL 2 /* Count events in kernel mode EXL = ERL = 0 */
- #define CEB_EXL 1 /* Count events with EXL = 1, ERL = 0 */
-
-+/*
-+ * Bits in ErrCtl register
-+ */
-+#define ECCB_WST 29
-+#define ECCF_WST (0x1 << ECCB_WST)
-+
- #endif /* _ASM_MIPSREGS_H */
---- a/include/cmd_confdefs.h
-+++ b/include/cmd_confdefs.h
-@@ -94,6 +94,7 @@
- #define CFG_CMD_EXT2 0x1000000000000000ULL /* EXT2 Support */
- #define CFG_CMD_SNTP 0x2000000000000000ULL /* SNTP support */
- #define CFG_CMD_DISPLAY 0x4000000000000000ULL /* Display support */
-+#define CFG_CMD_DHRYSTONE 0x8000000000000000ULL /* Dhrystone benchmark support */
-
- #define CFG_CMD_ALL 0xFFFFFFFFFFFFFFFFULL /* ALL commands */
-
-@@ -141,6 +142,7 @@
- CFG_CMD_SPI | \
- CFG_CMD_UNIVERSE | \
- CFG_CMD_USB | \
-+ CFG_CMD_DHRYSTONE | \
- CFG_CMD_VFD )
-
- /* Default configuration
---- /dev/null
-+++ b/include/config.h
-@@ -0,0 +1,2 @@
-+/* Automatically generated - do not edit */
-+#include <configs/danube.h>
---- /dev/null
-+++ b/include/config.mk
-@@ -0,0 +1,5 @@
-+ARCH = mips
-+CPU = mips
-+BOARD = danube
-+VENDOR = ifx
-+SOC = danube
---- a/include/flash.h
-+++ b/include/flash.h
-@@ -79,7 +79,7 @@ typedef struct {
- extern unsigned long flash_init (void);
- extern void flash_print_info (flash_info_t *);
- extern int flash_erase (flash_info_t *, int, int);
--extern int flash_sect_erase (ulong addr_first, ulong addr_last);
-+extern int flash_sect_erase (ulong addr_first, ulong addr_last, unsigned int bPartialErase);
- extern int flash_sect_protect (int flag, ulong addr_first, ulong addr_last);
-
- /* common/flash.c */
-@@ -131,7 +131,9 @@ extern void flash_read_factory_serial(fl
- #define MT2_MANUFACT 0x002C002C /* alternate MICRON manufacturer ID*/
- #define EXCEL_MANUFACT 0x004A004A /* Excel Semiconductor */
-
-- /* Micron Technologies (INTEL compat.) */
-+#define EON_ID_EN29LV320B 0x22f9
-+#define FLASH_29LV320B 0xE0
-+/* Micron Technologies (INTEL compat.) */
- #define MT_ID_28F400_T 0x44704470 /* 28F400B3 ID ( 4 M, top boot sector) */
- #define MT_ID_28F400_B 0x44714471 /* 28F400B3 ID ( 4 M, bottom boot sect) */
-
-@@ -299,6 +301,10 @@ extern void flash_read_factory_serial(fl
- #define TOSH_ID_FVT160 0xC2 /* TC58FVT160 ID (16 M, top ) */
- #define TOSH_ID_FVB160 0x43 /* TC58FVT160 ID (16 M, bottom ) */
-
-+#define MX_ID_29LV320AB 0x22A822A8 /* MXIC MX29LV320AB ID (32 M, bottom ) joelin */
-+#define MX_ID_29LV160BB 0x22492249 /* MXIC MX29LV160BB ID (16 M, bottom ) joelin */
-+#define MX_ID_29LV640BB 0x22cb22cb /* MXIC MX29LV640BB ID (64 M, bottom ) joelin */
-+
- /*-----------------------------------------------------------------------
- * Internal FLASH identification codes
- *
-@@ -422,6 +428,10 @@ extern void flash_read_factory_serial(fl
- #define FLASH_S29GL064M 0x00F0 /* Spansion S29GL064M-R6 */
- #define FLASH_S29GL128N 0x00F1 /* Spansion S29GL128N */
-
-+#define FLASH_29LV320AB 0x00B0 /* MXIC MX29LV320AB( 32M = 4M x 16 ) joelin 10/07/2004*/
-+#define FLASH_29LV160BB 0x00B1 /* MXIC MX29LV160BB( 16M = 2M x 16 ) joelin 11/22/2004*/
-+#define FLASH_29LV640BB 0x00B2 /* MXIC MX29LV640BB( 64M = 8M x 16 ) liupeng*/
-+
- #define FLASH_UNKNOWN 0xFFFF /* unknown flash type */
-
-
---- a/include/image.h
-+++ b/include/image.h
-@@ -132,6 +132,7 @@
- #define IH_COMP_NONE 0 /* No Compression Used */
- #define IH_COMP_GZIP 1 /* gzip Compression Used */
- #define IH_COMP_BZIP2 2 /* bzip2 Compression Used */
-+#define IH_COMP_LZMA 3 /* lzma Compression Used */
-
- #define IH_MAGIC 0x27051956 /* Image Magic Number */
- #define IH_NMLEN 32 /* Image Name Length */
---- /dev/null
-+++ b/include/syscall.h
-@@ -0,0 +1,42 @@
-+#ifndef __MON_SYS_CALL_H__
-+#define __MON_SYS_CALL_H__
-+
-+#ifndef __ASSEMBLY__
-+
-+#include <common.h>
-+
-+/* These are declarations of system calls available in C code */
-+int mon_getc(void);
-+int mon_tstc(void);
-+void mon_putc(const char);
-+void mon_puts(const char*);
-+void mon_printf(const char* fmt, ...);
-+void mon_install_hdlr(int, interrupt_handler_t*, void*);
-+void mon_free_hdlr(int);
-+void *mon_malloc(size_t);
-+void mon_free(void*);
-+void mon_udelay(unsigned long);
-+unsigned long mon_get_timer(unsigned long);
-+
-+#endif /* ifndef __ASSEMBLY__ */
-+
-+#define NR_SYSCALLS 11 /* number of syscalls */
-+
-+
-+/*
-+ * Make sure these functions are in the same order as they
-+ * appear in the "examples/syscall.S" file !!!
-+ */
-+#define SYSCALL_GETC 0
-+#define SYSCALL_TSTC 1
-+#define SYSCALL_PUTC 2
-+#define SYSCALL_PUTS 3
-+#define SYSCALL_PRINTF 4
-+#define SYSCALL_INSTALL_HDLR 5
-+#define SYSCALL_FREE_HDLR 6
-+#define SYSCALL_MALLOC 7
-+#define SYSCALL_FREE 8
-+#define SYSCALL_UDELAY 9
-+#define SYSCALL_GET_TIMER 10
-+
-+#endif
---- /dev/null
-+++ b/ld_uboot.conf
-@@ -0,0 +1,8 @@
-+TAG_DWNLD()
-+{
-+ 0xA0B00000 "u-boot.bin" /* Download u-boot image */
-+};
-+TAG_START()
-+{
-+ 0xA0B00000
-+}; /* Start u-boot image */
---- a/lib_generic/Makefile
-+++ b/lib_generic/Makefile
-@@ -28,7 +28,7 @@ LIB = $(obj)libgeneric.a
- COBJS = bzlib.o bzlib_crctable.o bzlib_decompress.o \
- bzlib_randtable.o bzlib_huffman.o \
- crc32.o ctype.o display_options.o ldiv.o \
-- string.o vsprintf.o zlib.o
-+ string.o vsprintf.o zlib.o LzmaDecode.o LzmaWrapper.o
-
- SRCS := $(COBJS:.o=.c)
- OBJS := $(addprefix $(obj),$(COBJS))
---- a/lib_mips/board.c
-+++ b/lib_mips/board.c
-@@ -29,9 +29,30 @@
- #include <net.h>
- #include <environment.h>
-
-+#ifdef CFG_BOOTSTRAP_CODE
-+//#include <asm/danube.h>
-+#undef CONFIG_MICROBZIP2
-+
-+#ifdef CONFIG_BZIP2
-+#include <bzlib.h>
-+#endif
-+
-+#ifdef CONFIG_MICROBZIP2
-+#include <micro_bzlib.h>
-+#endif
-+
-+#ifdef CONFIG_LZMA
-+#include <LzmaWrapper.h>
-+#endif
-+#endif //CFG_BOOTSTRAP_CODE
-+
- DECLARE_GLOBAL_DATA_PTR;
-
--#if ( ((CFG_ENV_ADDR+CFG_ENV_SIZE) < CFG_MONITOR_BASE) || \
-+#if ( ((CFG_ENV_ADDR+CFG_ENV_SIZE) < BOOTSTRAP_CFG_MONITOR_BASE) || \
-+ (CFG_ENV_ADDR >= (BOOTSTRAP_CFG_MONITOR_BASE + CFG_MONITOR_LEN)) ) || \
-+ defined(CFG_ENV_IS_IN_NVRAM) && defined(CFG_BOOTSTRAP_CODE)
-+#define TOTAL_MALLOC_LEN (CFG_MALLOC_LEN + CFG_ENV_SIZE)
-+#elif ( ((CFG_ENV_ADDR+CFG_ENV_SIZE) < CFG_MONITOR_BASE) || \
- (CFG_ENV_ADDR >= (CFG_MONITOR_BASE + CFG_MONITOR_LEN)) ) || \
- defined(CFG_ENV_IS_IN_NVRAM)
- #define TOTAL_MALLOC_LEN (CFG_MALLOC_LEN + CFG_ENV_SIZE)
-@@ -39,21 +60,24 @@ DECLARE_GLOBAL_DATA_PTR;
- #define TOTAL_MALLOC_LEN CFG_MALLOC_LEN
- #endif
-
--#undef DEBUG
--
- extern int timer_init(void);
--
- extern int incaip_set_cpuclk(void);
-
-+#ifdef CFG_BOOTSTRAP_CODE
-+extern ulong uboot_end_data_bootstrap;
-+extern ulong uboot_end_bootstrap;
-+#else //CFG_BOOTSTRAP_CODE
- extern ulong uboot_end_data;
- extern ulong uboot_end;
-+#endif //CFG_BOOTSTRAP_CODE
-
- ulong monitor_flash_len;
-
--const char version_string[] =
-- U_BOOT_VERSION" (" __DATE__ " - " __TIME__ ")";
-+const char version_string[] = U_BOOT_VERSION" (" __DATE__ " - " __TIME__ ")";
-
-+#ifdef DEBUG_ENABLE_BOOTSTRAP_PRINTF
- static char *failed = "*** failed ***\n";
-+#endif
-
- /*
- * Begin and End of memory area for malloc(), and current "brk"
-@@ -62,14 +86,15 @@ static ulong mem_malloc_start;
- static ulong mem_malloc_end;
- static ulong mem_malloc_brk;
-
--
- /*
- * The Malloc area is immediately below the monitor copy in DRAM
- */
--static void mem_malloc_init (void)
--{
-+#ifdef CFG_BOOTSTRAP_CODE
-+static void mem_malloc_init (ulong dest_addr) {
-+#else //CFG_BOOTSTRAP_CODE
-+static void mem_malloc_init (void) {
- ulong dest_addr = CFG_MONITOR_BASE + gd->reloc_off;
--
-+#endif //CFG_BOOTSTRAP_CODE
- mem_malloc_end = dest_addr;
- mem_malloc_start = dest_addr - TOTAL_MALLOC_LEN;
- mem_malloc_brk = mem_malloc_start;
-@@ -79,6 +104,25 @@ static void mem_malloc_init (void)
- mem_malloc_end - mem_malloc_start);
- }
-
-+#ifdef CFG_BOOTSTRAP_CODE
-+void *malloc(unsigned int size) {
-+ if(size < (mem_malloc_end - mem_malloc_start)) {
-+ mem_malloc_start += size;
-+ debug ("malloc : size required = 0x%08lx and pointer = 0x%08lx\n",size,mem_malloc_start - size);
-+ return (void *)(mem_malloc_start - size);
-+ }
-+ return NULL;
-+}
-+
-+void *realloc(void *src,unsigned int size) {
-+ return NULL;
-+}
-+
-+void free(void *src) {
-+ return;
-+}
-+#endif //CFG_BOOTSTRAP_CODE
-+
- void *sbrk (ptrdiff_t increment)
- {
- ulong old = mem_malloc_brk;
-@@ -99,42 +143,58 @@ static int init_func_ram (void)
- #else
- int board_type = 0; /* use dummy arg */
- #endif
-- puts ("DRAM: ");
-
-+#ifdef DEBUG_ENABLE_BOOTSTRAP_PRINTF
-+#ifdef CONFIG_USE_DDR_RAM
-+ puts ("DDR-DRAM: ");
-+#else
-+ puts ("DRAM: ");
-+#endif
-+#endif //DEBUG_ENABLE_BOOTSTRAP_PRINTF
- if ((gd->ram_size = initdram (board_type)) > 0) {
-+#ifdef DEBUG_ENABLE_BOOTSTRAP_PRINTF
- print_size (gd->ram_size, "\n");
-+#endif //DEBUG_ENABLE_BOOTSTRAP_PRINTF
- return (0);
- }
-+#ifdef DEBUG_ENABLE_BOOTSTRAP_PRINTF
- puts (failed);
-+#endif //DEBUG_ENABLE_BOOTSTRAP_PRINTF
- return (1);
- }
-
-+#if !defined(CFG_BOOTSTRAP_CODE) || defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF)
- static int display_banner(void)
- {
--
- printf ("\n\n%s\n\n", version_string);
- return (0);
- }
-+#endif
-
-+#ifndef CFG_BOOTSTRAP_CODE
- static void display_flash_config(ulong size)
- {
- puts ("Flash: ");
- print_size (size, "\n");
- }
-+#endif //CFG_BOOTSTRAP_CODE
-
--
-+#if !defined(CFG_BOOTSTRAP_CODE) || defined(DEBUG_ENABLE_BOOTSTRAP_PRINTF)
- static int init_baudrate (void)
- {
-+#ifndef CFG_BOOTSTRAP_CODE
- char tmp[64]; /* long enough for environment variables */
- int i = getenv_r ("baudrate", tmp, sizeof (tmp));
-
- gd->baudrate = (i > 0)
- ? (int) simple_strtoul (tmp, NULL, 10)
- : CONFIG_BAUDRATE;
--
-+#else //CFG_BOOTSTRAP_CODE
-+ gd->baudrate = CONFIG_BAUDRATE;
-+#endif //CFG_BOOTSTRAP_CODE
- return (0);
- }
--
-+#endif
-
- /*
- * Breath some life into the board...
-@@ -159,27 +219,49 @@ static int init_baudrate (void)
- typedef int (init_fnc_t) (void);
-
- init_fnc_t *init_sequence[] = {
-+#ifdef CFG_BOOTSTRAP_CODE
-+ //fuse_prg,
-+ //timer_init,
-+ //env_init, /* initialize environment */
-+#ifdef DEBUG_ENABLE_BOOTSTRAP_PRINTF
-+ init_baudrate, /* initialze baudrate settings */
-+ serial_init, /* serial communications setup */
-+ console_init_f,
-+ display_banner, /* say that we are here */
-+ checkboard,
-+#endif //DEBUG_ENABLE_BOOTSTRAP_PRINTF
-+ init_func_ram,
-+ NULL,
-+#else /********** CFG_BOOTSTRAP_CODE **********/
- timer_init,
-- env_init, /* initialize environment */
--#ifdef CONFIG_INCA_IP
-- incaip_set_cpuclk, /* set cpu clock according to environment variable */
--#endif
- init_baudrate, /* initialze baudrate settings */
- serial_init, /* serial communications setup */
- console_init_f,
- display_banner, /* say that we are here */
- checkboard,
- init_func_ram,
-+ env_init, /* initialize environment */
- NULL,
-+#endif //CFG_BOOTSTRAP_CODE
- };
-
-+#ifdef CFG_BOOTSTRAP_CODE
-+extern void bootstrap_relocate_code(ulong addr_sp, gd_t *id, ulong addr);
-
-+void bootstrap_board_init_f(ulong bootflag)
-+#else
- void board_init_f(ulong bootflag)
-+#endif
- {
- gd_t gd_data, *id;
- bd_t *bd;
- init_fnc_t **init_fnc_ptr;
-- ulong addr, addr_sp, len = (ulong)&uboot_end - CFG_MONITOR_BASE;
-+#ifdef CFG_BOOTSTRAP_CODE
-+ ulong addr, addr_sp, len = (ulong)&uboot_end_bootstrap - BOOTSTRAP_CFG_MONITOR_BASE;
-+ ulong lzmaImageaddr = 0;
-+#else //CFG_BOOTSTRAP_CODE
-+ ulong addr, addr_sp, len = CFG_MONITOR_LEN;
-+#endif //CFG_BOOTSTRAP_CODE
- ulong *s;
- #ifdef CONFIG_PURPLE
- void copy_code (ulong);
-@@ -219,13 +301,12 @@ void board_init_f(ulong bootflag)
- addr -= len;
- addr &= ~(16 * 1024 - 1);
-
-- debug ("Reserving %ldk for U-Boot at: %08lx\n", len >> 10, addr);
-+ debug ("Reserving %d Bytes for U-Boot at: %08lx\n", len, addr);
-
- /* Reserve memory for malloc() arena.
- */
- addr_sp = addr - TOTAL_MALLOC_LEN;
-- debug ("Reserving %dk for malloc() at: %08lx\n",
-- TOTAL_MALLOC_LEN >> 10, addr_sp);
-+ debug ("Reserving %d Bytes for malloc() at: %08lx\n", TOTAL_MALLOC_LEN, addr_sp);
-
- /*
- * (permanently) allocate a Board Info struct
-@@ -234,20 +315,17 @@ void board_init_f(ulong bootflag)
- addr_sp -= sizeof(bd_t);
- bd = (bd_t *)addr_sp;
- gd->bd = bd;
-- debug ("Reserving %d Bytes for Board Info at: %08lx\n",
-- sizeof(bd_t), addr_sp);
-+ debug ("Reserving %d Bytes for Board Info at: %08lx\n", sizeof(bd_t), addr_sp);
-
- addr_sp -= sizeof(gd_t);
- id = (gd_t *)addr_sp;
-- debug ("Reserving %d Bytes for Global Data at: %08lx\n",
-- sizeof (gd_t), addr_sp);
-+ debug ("Reserving %d Bytes for Global Data at: %08lx\n", sizeof (gd_t), addr_sp);
-
- /* Reserve memory for boot params.
- */
- addr_sp -= CFG_BOOTPARAMS_LEN;
- bd->bi_boot_params = addr_sp;
-- debug ("Reserving %dk for boot params() at: %08lx\n",
-- CFG_BOOTPARAMS_LEN >> 10, addr_sp);
-+ debug ("Reserving %dk for boot params() at: %08lx\n", CFG_BOOTPARAMS_LEN >> 10, addr_sp);
-
- /*
- * Finally, we set up a new (bigger) stack.
-@@ -279,7 +357,16 @@ void board_init_f(ulong bootflag)
- copy_code(addr);
- #endif
-
-+#ifdef CFG_BOOTSTRAP_CODE
-+ lzmaImageaddr = (ulong)&uboot_end_data_bootstrap;
-+#ifdef DEBUG_ENABLE_BOOTSTRAP_PRINTF
-+ puts("\n BOOTSTRAP: relocate_code start");
-+#endif //DEBUG_ENABLE_BOOTSTRAP_PRINTF
-+ bootstrap_relocate_code (addr_sp, id, addr);
-+#else //CFG_BOOTSTRAP_CODE
-+ puts("\n relocate_code start");
- relocate_code (addr_sp, id, addr);
-+#endif //CFG_BOOTSTRAP_CODE
-
- /* NOTREACHED - relocate_code() does not return */
- }
-@@ -292,7 +379,110 @@ void board_init_f(ulong bootflag)
- *
- ************************************************************************
- */
-+#ifdef CFG_BOOTSTRAP_CODE
-+void bootstrap_board_init_r (gd_t *id, ulong dest_addr) {
-+ int i;
-+ ulong addr;
-+ ulong data, len, checksum;
-+ ulong *len_ptr;
-+ image_header_t header;
-+ image_header_t *hdr = &header;
-+ unsigned int destLen;
-+ int (*fn)(void);
-+
-+#ifdef DEBUG_ENABLE_BOOTSTRAP_PRINTF
-+ puts("\n BOOTSTRAP: relocate_code finish.\n");
-+#endif //DEBUG_ENABLE_BOOTSTRAP_PRINTF
-+
-+ /* initialize malloc() area */
-+ mem_malloc_init(dest_addr);
-+
-+ addr = (char *)(BOOTSTRAP_CFG_MONITOR_BASE + ((ulong)&uboot_end_data_bootstrap - dest_addr));
-+ memmove (&header, (char *)addr, sizeof(image_header_t));
-+
-+ if (ntohl(hdr->ih_magic) != IH_MAGIC) {
-+#ifdef DEBUG_ENABLE_BOOTSTRAP_PRINTF
-+ printf ("Bad Magic Number at address 0x%08lx\n",addr);
-+#endif //DEBUG_ENABLE_BOOTSTRAP_PRINTF
-+ return;
-+ }
-
-+ data = (ulong)&header;
-+ len = sizeof(image_header_t);
-+
-+ checksum = ntohl(hdr->ih_hcrc);
-+ hdr->ih_hcrc = 0;
-+ if (crc32 (0, (unsigned char *)data, len) != checksum) {
-+#ifdef DEBUG_ENABLE_BOOTSTRAP_PRINTF
-+ printf ("Bad Header Checksum\n");
-+#endif //DEBUG_ENABLE_BOOTSTRAP_PRINTF
-+ return;
-+ }
-+
-+ data = addr + sizeof(image_header_t);
-+ len = ntohl(hdr->ih_size);
-+ len_ptr = (ulong *)data;
-+
-+#ifdef DEBUG_ENABLE_BOOTSTRAP_PRINTF
-+ debug ("Disabling all the interrupts\n");
-+#endif //DEBUG_ENABLE_BOOTSTRAP_PRINTF
-+ disable_interrupts();
-+
-+#ifdef DEBUG_ENABLE_BOOTSTRAP_PRINTF
-+ debug (" Uncompressing UBoot Image ... \n" );
-+#endif //DEBUG_ENABLE_BOOTSTRAP_PRINTF
-+ /*
-+ * If we've got less than 4 MB of malloc() space,
-+ * use slower decompression algorithm which requires
-+ * at most 2300 KB of memory.
-+ */
-+ destLen = 0x0;
-+
-+#ifdef CONFIG_BZIP2
-+ i = BZ2_bzBuffToBuffDecompress ((char*)ntohl(hdr->ih_load),
-+ 0x400000, (char *)data, len,
-+ CFG_MALLOC_LEN < (4096 * 1024), 0);
-+ if (i != BZ_OK) {
-+#ifdef DEBUG_ENABLE_BOOTSTRAP_PRINTF
-+ printf ("BUNZIP2 ERROR %d - must RESET board to recover\n", i);
-+#endif //DEBUG_ENABLE_BOOTSTRAP_PRINTF
-+ return;
-+ }
-+#elif CONFIG_MICROBZIP2
-+ i = micro_bzBuffToBuffDecompress ((char*)ntohl(hdr->ih_load),
-+ &destLen, (char *)data, len,
-+ CFG_MALLOC_LEN < (4096 * 1024), 0);
-+ if (i != RETVAL_OK) {
-+#ifdef DEBUG_ENABLE_BOOTSTRAP_PRINTF
-+ printf ("MICRO_BUNZIP2 ERROR %d - must RESET board to recover\n", i);
-+#endif //DEBUG_ENABLE_BOOTSTRAP_PRINTF
-+ return;
-+ }
-+#elif CONFIG_LZMA
-+ i = lzma_inflate ((unsigned char *)data, len, (unsigned char*)ntohl(hdr->ih_load), &destLen);
-+ if (i != LZMA_RESULT_OK) {
-+#ifdef DEBUG_ENABLE_BOOTSTRAP_PRINTF
-+ printf ("LZMA ERROR %d - must RESET board to recover\n", i);
-+#endif //DEBUG_ENABLE_BOOTSTRAP_PRINTF
-+ return;
-+ }
-+#else
-+#ifdef DEBUG_ENABLE_BOOTSTRAP_PRINTF
-+ printf ("NONE Compressing u-boot body!!\n");
-+#endif //DEBUG_ENABLE_BOOTSTRAP_PRINTF
-+ memmove ((void *)ntohl(hdr->ih_load), (uchar *)data, len);
-+ destLen = len;
-+#endif
-+#ifdef DEBUG_ENABLE_BOOTSTRAP_PRINTF
-+ debug (" Uncompression completed successfully with destLen %d.\n ",destLen );
-+ debug ("Head: Jumping to u-boot in the ram at 0x%08lx\n", CFG_MONITOR_BASE);
-+#endif //DEBUG_ENABLE_BOOTSTRAP_PRINTF
-+
-+ fn = ntohl(hdr->ih_load);
-+ (*fn)();
-+ hang ();
-+}
-+#else //CFG_BOOTSTRAP_CODE
- void board_init_r (gd_t *id, ulong dest_addr)
- {
- cmd_tbl_t *cmdtp;
-@@ -305,6 +495,8 @@ void board_init_r (gd_t *id, ulong dest_
- bd_t *bd;
- int i;
-
-+ puts("\n relocate_code finish.\n");
-+
- gd = id;
- gd->flags |= GD_FLG_RELOC; /* tell others: relocation done */
-
-@@ -321,12 +513,10 @@ void board_init_r (gd_t *id, ulong dest_
- ulong addr;
-
- addr = (ulong) (cmdtp->cmd) + gd->reloc_off;
--#if 0
-- printf ("Command \"%s\": 0x%08lx => 0x%08lx\n",
-- cmdtp->name, (ulong) (cmdtp->cmd), addr);
--#endif
-- cmdtp->cmd =
-- (int (*)(struct cmd_tbl_s *, int, int, char *[]))addr;
-+
-+ debug ("Command \"%s\": 0x%08lx => 0x%08lx\n", cmdtp->name, (ulong) (cmdtp->cmd), addr);
-+
-+ cmdtp->cmd = (int (*)(struct cmd_tbl_s *, int, int, char *[]))addr;
-
- addr = (ulong)(cmdtp->name) + gd->reloc_off;
- cmdtp->name = (char *)addr;
-@@ -363,7 +553,13 @@ void board_init_r (gd_t *id, ulong dest_
- /* initialize malloc() area */
- mem_malloc_init();
- malloc_bin_reloc();
-+#if (CONFIG_COMMANDS & CFG_CMD_NAND)
-+ nand_init(); /* go init the NAND */
-+#endif
-
-+#ifdef CONFIG_SPI
-+ spi_init_f(); /* go init the SPI flash */
-+#endif
- /* relocate environment function pointers etc. */
- env_relocate();
-
-@@ -424,9 +620,12 @@ void board_init_r (gd_t *id, ulong dest_
-
- /* NOTREACHED - no way out of command loop except booting */
- }
-+#endif //CFG_BOOTSTRAP_CODE
-
- void hang (void)
- {
-+#ifdef DEBUG_ENABLE_BOOTSTRAP_PRINTF
- puts ("### ERROR ### Please RESET the board ###\n");
-+#endif //DEBUG_ENABLE_BOOTSTRAP_PRINTF
- for (;;);
- }
---- a/lib_mips/time.c
-+++ b/lib_mips/time.c
-@@ -80,6 +80,19 @@ void udelay (unsigned long usec)
- /*NOP*/;
- }
-
-+#ifndef CFG_BOOTSTRAP_CODE
-+void mdelay (unsigned long msec)
-+{
-+ int i,j;
-+ for(i=0;i<msec;i++)
-+ {
-+ udelay(1000);
-+
-+ }
-+
-+}
-+#endif
-+
- /*
- * This function is derived from PowerPC code (read timebase as long long).
- * On MIPS it just returns the timer value.
---- a/net/eth.c
-+++ b/net/eth.c
-@@ -25,6 +25,9 @@
- #include <command.h>
- #include <net.h>
- #include <miiphy.h>
-+#if defined(CONFIG_IFX_MIPS)
-+# include "ifx_eth.c"
-+#endif
-
- #if (CONFIG_COMMANDS & CFG_CMD_NET) && defined(CONFIG_NET_MULTI)
-
-@@ -54,6 +57,9 @@ extern int scc_initialize(bd_t*);
- extern int skge_initialize(bd_t*);
- extern int tsec_initialize(bd_t*, int, char *);
- extern int npe_initialize(bd_t *);
-+#if defined(CONFIG_IFX_MIPS)
-+ IFX_ETH_INITIALIZE_EXTERN
-+#endif
-
- static struct eth_device *eth_devices, *eth_current;
-
-@@ -235,7 +241,9 @@ int eth_initialize(bd_t *bis)
- #if defined(CONFIG_RTL8169)
- rtl8169_initialize(bis);
- #endif
--
-+#if defined(CONFIG_IFX_MIPS)
-+ IFX_ETH_INITIALIZE(bis)
-+#endif
- if (!eth_devices) {
- puts ("No ethernet found.\n");
- } else {
---- a/tools/mkimage.c
-+++ b/tools/mkimage.c
-@@ -28,6 +28,7 @@
- #ifndef __WIN32__
- #include <netinet/in.h> /* for host / network byte order conversions */
- #endif
-+#include <sys/types.h>
- #include <sys/mman.h>
- #include <sys/stat.h>
- #include <time.h>
-@@ -138,6 +139,7 @@ table_entry_t comp_name[] = {
- { IH_COMP_NONE, "none", "uncompressed", },
- { IH_COMP_BZIP2, "bzip2", "bzip2 compressed", },
- { IH_COMP_GZIP, "gzip", "gzip compressed", },
-+ { IH_COMP_LZMA, "lzma", "lzma compressed", },
- { -1, "", "", },
- };
-
-@@ -445,7 +447,7 @@ NXTARG: ;
- }
-
- /* We're a bit of paranoid */
--#if defined(_POSIX_SYNCHRONIZED_IO) && !defined(__sun__) && !defined(__FreeBSD__)
-+#if defined(_POSIX_SYNCHRONIZED_IO) && !defined(__sun__) && !defined(__FreeBSD__) && !defined(__APPLE__)
- (void) fdatasync (ifd);
- #else
- (void) fsync (ifd);
-@@ -495,7 +497,7 @@ NXTARG: ;
- (void) munmap((void *)ptr, sbuf.st_size);
-
- /* We're a bit of paranoid */
--#if defined(_POSIX_SYNCHRONIZED_IO) && !defined(__sun__) && !defined(__FreeBSD__)
-+#if defined(_POSIX_SYNCHRONIZED_IO) && !defined(__sun__) && !defined(__FreeBSD__) && !defined(__APPLE__)
- (void) fdatasync (ifd);
- #else
- (void) fsync (ifd);
---- a/cpu/mips/cache.S
-+++ b/cpu/mips/cache.S
-@@ -29,7 +29,9 @@
- #include <asm/mipsregs.h>
- #include <asm/addrspace.h>
- #include <asm/cacheops.h>
--
-+#if defined(CONFIG_IFX_MIPS)
-+# include "danube/ifx_cache.S"
-+#endif
-
- /* 16KB is the maximum size of instruction and data caches on
- * MIPS 4K.
-@@ -155,6 +157,9 @@ mips_cache_reset:
- */
-
- mtc0 zero, CP0_TAGLO
-+#if defined(CONFIG_IFX_MIPS) && defined(IFX_CACHE_EXTRA_INVALID_TAG)
-+ IFX_CACHE_EXTRA_INVALID_TAG
-+#endif
-
- /*
- * The caches are probably in an indeterminate state,
-@@ -171,6 +176,9 @@ mips_cache_reset:
- move a1, a2
- icacheopn(a0,a1,a2,a3,121,(Index_Store_Tag_I,Fill))
-
-+#if defined(CONFIG_IFX_MIPS) && defined(IFX_CACHE_EXTRA_OPERATION)
-+ IFX_CACHE_EXTRA_OPERATION
-+#else
- /* To support Orion/R4600, we initialise the data cache in 3 passes.
- */
-
-@@ -200,6 +208,7 @@ mips_cache_reset:
- move a3, t5 # dcacheLineSize
- move a1, a2
- icacheop(a0,a1,a2,a3,Index_Store_Tag_D)
-+#endif
-
- j ra
- .end mips_cache_reset
---- a/cpu/mips/config.mk
-+++ b/cpu/mips/config.mk
-@@ -20,20 +20,26 @@
- # Foundation, Inc., 59 Temple Place, Suite 330, Boston,
- # MA 02111-1307 USA
- #
--v=$(shell \
--$(CROSS_COMPILE)as --version|grep "GNU assembler"|awk '{print $$3}'|awk -F . '{print $$2}')
--MIPSFLAGS=$(shell \
--if [ "$v" -lt "14" ]; then \
-- echo "-mcpu=4kc"; \
--else \
-- echo "-march=4kc -mtune=4kc"; \
--fi)
-
-+ifndef PLATFORM_CPU
-+PLATFORM_CPU = mips32
-+endif
-+
-+MIPSFLAGS +=$(call cc-option,-march=$(PLATFORM_CPU) -mtune=$(PLATFORM_CPU),-mcpu=$(PLATFORM_CPU))
-+
-+ifeq ($(CROSS_COMPILE_UCLIBC),1)
-+ifneq (,$(findstring mipsel,$(CROSS_COMIPLE)))
-+ENDIANNESS = -el
-+else
-+ENDIANNESS = -eb
-+endif
-+else
- ifneq (,$(findstring 4KCle,$(CROSS_COMPILE)))
- ENDIANNESS = -EL
- else
- ENDIANNESS = -EB
- endif
-+endif
-
- MIPSFLAGS += $(ENDIANNESS) -mabicalls
-
---- a/cpu/mips/cpu.c
-+++ b/cpu/mips/cpu.c
-@@ -23,7 +23,12 @@
-
- #include <common.h>
- #include <command.h>
--#include <asm/inca-ip.h>
-+#if defined(CONFIG_INCA_IP)
-+# include <asm/inca-ip.h>
-+#elif defined(CONFIG_IFX_MIPS)
-+# include <asm/danube.h>
-+# include "danube/ifx_cpu.c"
-+#endif
- #include <asm/mipsregs.h>
-
- int do_reset(cmd_tbl_t *cmdtp, int flag, int argc, char *argv[])
-@@ -34,6 +39,8 @@ int do_reset(cmd_tbl_t *cmdtp, int flag,
- void (*f)(void) = (void *) 0xbfc00000;
-
- f();
-+#elif defined(CONFIG_IFX_MIPS)
-+ IFX_CPU_RESET;
- #endif
- fprintf(stderr, "*** reset failed ***\n");
- return 0;
---- a/cpu/mips/incaip_clock.c
-+++ b/cpu/mips/incaip_clock.c
-@@ -22,8 +22,9 @@
- */
-
- #include <common.h>
--#include <asm/inca-ip.h>
-
-+#ifdef CONFIG_INCA_IP
-+#include <asm/inca-ip.h>
-
- /*******************************************************************************
- *
-@@ -114,3 +115,5 @@ int incaip_set_cpuclk (void)
-
- return 0;
- }
-+
-+#endif /* CONFIG_INCA_IP */
---- a/cpu/mips/start.S
-+++ b/cpu/mips/start.S
-@@ -27,7 +27,9 @@
- #include <version.h>
- #include <asm/regdef.h>
- #include <asm/mipsregs.h>
--
-+#if defined(CONFIG_IFX_MIPS)
-+# include "danube/ifx_start.S"
-+#endif
-
- #define RVECENT(f,n) \
- b f; nop
-@@ -36,15 +38,24 @@
- li k0,bev
-
- .set noreorder
--
-+#ifdef CFG_BOOTSTRAP_CODE
-+ .globl _start_bootstrap
-+#else
- .globl _start
-+#endif
- .text
-+#ifdef CFG_BOOTSTRAP_CODE
-+_start_bootstrap:
-+#else
- _start:
-+#endif
- RVECENT(reset,0) /* U-boot entry point */
- RVECENT(reset,1) /* software reboot */
--#if defined(CONFIG_INCA_IP)
-+#if defined(CONFIG_INCA_IP) || defined(CONFIG_INCA_IP2)
- .word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */
- .word 0x00000000 /* phase of the flash */
-+#elif defined(CONFIG_IFX_MIPS) && defined(IFX_EBU_BOOTCFG_DWORD)
-+ IFX_EBU_BOOTCFG_DWORD
- #elif defined(CONFIG_PURPLE)
- .word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */
- .word INFINEON_EBU_BOOTCFG /* EBU init code, fetched during booting */
-@@ -181,6 +192,9 @@ _start:
- * 128 * 8 == 1024 == 0x400
- * so this is address R_VEC+0x400 == 0xbfc00400
- */
-+#if defined(CONFIG_IFX_MIPS) && defined(IFX_MORE_RESERVED_VECTORS)
-+ IFX_MORE_RESERVED_VECTORS
-+#else
- #ifdef CONFIG_PURPLE
- /* 0xbfc00400 */
- .word 0xdc870000
-@@ -205,8 +219,12 @@ _start:
- .word 0x00000000
- .word 0x00000000
- #endif /* CONFIG_PURPLE */
-+#endif /* CONFIG_IFX_MIPS */
- .align 4
- reset:
-+#if defined(CONFIG_IFX_MIPS) && defined(IFX_RESET_PRECHECK)
-+ IFX_RESET_PRECHECK
-+#endif
-
- /* Clear watch registers.
- */
-@@ -226,6 +244,10 @@ reset:
- /* CAUSE register */
- mtc0 zero, CP0_CAUSE
-
-+#if defined(CONFIG_IFX_MIPS) && defined(IFX_CPU_EXTRA_INIT)
-+ IFX_CPU_EXTRA_INIT
-+#endif
-+
- /* Init Timer */
- mtc0 zero, CP0_COUNT
- mtc0 zero, CP0_COMPARE
-@@ -252,12 +274,26 @@ reset:
- nop
- #endif
-
-+#if defined(CONFIG_IFX_MIPS) && defined(IFX_CPU1_SUPPORT) && defined(IFX_SKIP_LOWLEVEL_INIT)
-+ IFX_SKIP_LOWLEVEL_INIT
-+#endif
-+#ifdef CFG_BOOTSTRAP_CODE
- /* Initialize any external memory.
- */
- la t9, lowlevel_init
- jalr t9
- nop
-+#endif
-+lowlevel_init_done:
-+
-+ beq s0, zero, init_cache_0
-+ nop
-+
-+#if defined(CONFIG_IFX_MIPS) && defined(IFX_CPU1_SUPPORT) && defined(IFX_CPU1_INIT)
-+ IFX_CPU1_INIT
-+#endif
-
-+init_cache_0:
- /* Initialize caches...
- */
- la t9, mips_cache_reset
-@@ -266,7 +302,11 @@ reset:
-
- /* ... and enable them.
- */
-+#if defined(CONFIG_IFX_MIPS) && defined(IFX_CACHE_OPER_MODE)
-+ IFX_CACHE_OPER_MODE
-+#else
- li t0, CONF_CM_CACHABLE_NONCOHERENT
-+#endif
- mtc0 t0, CP0_CONFIG
-
-
-@@ -280,13 +320,38 @@ reset:
- li t0, CFG_SDRAM_BASE + CFG_INIT_SP_OFFSET
- la sp, 0(t0)
-
-+#if defined(CONFIG_IFX_MIPS) && defined(IFX_CPU1_SUPPORT) && defined(IFX_BOOT_CLEAR)
-+ IFX_BOOT_CLEAR
-+#endif
-+
-+#ifdef CFG_BOOTSTRAP_CODE
-+ la t9, bootstrap_board_init_f
-+#else
- la t9, board_init_f
-+#endif
- j t9
- nop
-
-+#ifdef CFG_BOOTSTRAP_CODE
-+/*
-+ * void jump_unconditional (addr)
-+ * This function simply jumps to the location pointed by a0.
-+ * a0 = target_location
-+ *
-+ */
-+ .globl jump_unconditional
-+ .ent jump_unconditional
-+jump_unconditional:
-+ move t9, a0
-+ j t9
-+ nop
-+ .end jump_unconditional
-+
-+#endif
-
- /*
- * void relocate_code (addr_sp, gd, addr_moni)
-+ * void bootstrap_relocate_code (addr_sp, gd, addr_moni)
- *
- * This "function" does not return, instead it continues in RAM
- * after relocating the monitor code.
-@@ -295,12 +360,22 @@ reset:
- * a1 = gd
- * a2 = destination address
- */
-+#ifdef CFG_BOOTSTRAP_CODE
-+ .globl bootstrap_relocate_code
-+ .ent bootstrap_relocate_code
-+bootstrap_relocate_code:
-+#else
- .globl relocate_code
- .ent relocate_code
- relocate_code:
-+#endif
- move sp, a0 /* Set new stack pointer */
-
-+#ifdef CFG_BOOTSTRAP_CODE
-+ li t0, BOOTSTRAP_CFG_MONITOR_BASE
-+#else
- li t0, CFG_MONITOR_BASE
-+#endif
- la t3, in_ram
- lw t2, -12(t3) /* t2 <-- uboot_end_data */
- move t1, a2
-@@ -311,7 +386,11 @@ relocate_code:
- * New GOT-PTR = (old GOT-PTR - CFG_MONITOR_BASE) + Destination Address
- */
- move t6, gp
-+#ifdef CFG_BOOTSTRAP_CODE
-+ sub gp, BOOTSTRAP_CFG_MONITOR_BASE
-+#else
- sub gp, CFG_MONITOR_BASE
-+#endif
- add gp, a2 /* gp now adjusted */
- sub t6, gp, t6 /* t6 <-- relocation offset */
-
-@@ -337,12 +416,21 @@ relocate_code:
-
- /* Jump to where we've relocated ourselves.
- */
-+#ifdef CFG_BOOTSTRAP_CODE
-+ addi t0, a2, in_ram - _start_bootstrap
-+#else
- addi t0, a2, in_ram - _start
-+#endif
- j t0
- nop
-
-+#ifdef CFG_BOOTSTRAP_CODE
-+ .word uboot_end_data_bootstrap
-+ .word uboot_end_bootstrap
-+#else
- .word uboot_end_data
- .word uboot_end
-+#endif
- .word num_got_entries
-
- in_ram:
-@@ -374,12 +462,19 @@ in_ram:
- sw zero, 0(t1) /* delay slot */
-
- move a0, a1
-+#ifdef CFG_BOOTSTRAP_CODE
-+ la t9, bootstrap_board_init_r
-+#else
- la t9, board_init_r
-+#endif
- j t9
- move a1, a2 /* delay slot */
-
-+#ifdef CFG_BOOTSTRAP_CODE
-+ .end bootstrap_relocate_code
-+#else
- .end relocate_code
--
-+#endif
-
- /* Exception handlers.
- */
-@@ -388,3 +483,20 @@ romReserved:
-
- romExcHandle:
- b romExcHandle
-+
-+romEjtagHandle:
-+#ifdef CFG_BOOTSTRAP_CODE
-+ deret
-+ nop
-+#endif /* CFG_BOOTSTRAP_CODE */
-+1:
-+ b 1b
-+
-+ /* Additional handlers.
-+ */
-+#if defined(CONFIG_IFX_MIPS)
-+#if defined(IFX_MIPS_HANDLER_1)
-+ifx_mips_handler_1:
-+ IFX_MIPS_HANDLER_1
-+#endif
-+#endif
---- a/tools/Makefile
-+++ b/tools/Makefile
-@@ -21,7 +21,7 @@
- # MA 02111-1307 USA
- #
-
--BIN_FILES = img2srec$(SFX) mkimage$(SFX) envcrc$(SFX) gen_eth_addr$(SFX) bmp_logo$(SFX)
-+BIN_FILES = mkimage$(SFX)
-
- OBJ_LINKS = environment.o crc32.o
- OBJ_FILES = img2srec.o mkimage.o envcrc.o gen_eth_addr.o bmp_logo.o
+++ /dev/null
---- a/cpu/mips/Makefile
-+++ b/cpu/mips/Makefile
-@@ -36,6 +36,9 @@ START := $(addprefix $(obj),$(START))
-
- all: $(obj).depend $(START) $(LIB)
-
-+start.o: start.S
-+ $(CC) $(AFLAGS) -fPIC -c -o $@ $<
-+
- $(LIB): $(OBJS)
- $(AR) $(ARFLAGS) $@ $(OBJS)
-
---- a/Makefile
-+++ b/Makefile
-@@ -185,8 +185,8 @@ include $(TOPDIR)/config.mk
- OBJS = cpu/$(CPU)/start.o
- OBJS_BOOTSTRAP = cpu/$(CPU)/start_bootstrap.o
-
--cpu/$(CPU)/start_bootstrap.S: cpu/$(CPU)/start.S
-- ln -s start.S cpu/$(CPU)/start_bootstrap.S
-+cpu/$(CPU)/start_bootstrap.o: cpu/$(CPU)/start.S
-+ $(CC) $(AFLAGS) -fPIC -DCFG_BOOTSTRAP_CODE -c -o $@ $<
-
- ifeq ($(CPU),i386)
- OBJS += cpu/$(CPU)/start16.o
+++ /dev/null
---- a/board/ifx/danube/flash.c
-+++ b/board/ifx/danube/flash.c
-@@ -470,7 +470,10 @@ ulong flash_get_size (FPWV *addr, flash_
- case (uchar)MX_MANUFACT: // 0x00c2
- info->flash_id = FLASH_MAN_MX ;//0x00030000
- break;
--
-+ case (uchar)EON_MANUFACT:
-+ printf("%s:%s[%d]\n", __FILE__, __func__, __LINE__);
-+ info->flash_id = FLASH_MAN_AMD ;
-+ break;
- default:
- info->flash_id = FLASH_UNKNOWN;
- info->sector_count = 0;
---- a/include/flash.h
-+++ b/include/flash.h
-@@ -130,6 +130,7 @@ extern void flash_read_factory_serial(fl
- #define TOSH_MANUFACT 0x00980098 /* TOSHIBA manuf. ID in D23..D16, D7..D0 */
- #define MT2_MANUFACT 0x002C002C /* alternate MICRON manufacturer ID*/
- #define EXCEL_MANUFACT 0x004A004A /* Excel Semiconductor */
-+#define EON_MANUFACT 0x0000007F
-
- #define EON_ID_EN29LV320B 0x22f9
- #define FLASH_29LV320B 0xE0
+++ /dev/null
---- a/drivers/ifx_sw.c
-+++ b/drivers/ifx_sw.c
-@@ -118,7 +118,7 @@ int danube_switch_initialize(bd_t * bis)
- {
- struct eth_device *dev;
- unsigned short chipid;
--
-+ int i;
- #if 0
- printf("Entered danube_switch_initialize()\n");
- #endif
-@@ -130,6 +130,19 @@ int danube_switch_initialize(bd_t * bis)
- }
- memset(dev, 0, sizeof(*dev));
-
-+#ifdef A800_SWITCH
-+ printf ("bring up a800 switch and leds\n");
-+ *EBU_CON_1 = 0x1e7ff;
-+ *EBU_ADDR_SEL_1 = 0x14000001;
-+
-+ *((volatile u16*)0xb4000000) = 0x0;
-+ for(i = 0; i < 1000; i++)
-+ udelay(1000);
-+ *((volatile u16*)0xb4000000) = (1 << 10);
-+ *EBU_CON_1 = 0x8001e7ff;
-+#define CLK_OUT2_25MHZ
-+#endif
-+
- danube_dma_init();
- danube_init_switch_chip(REV_MII_MODE);
-
projects / openwrt.git / commitdiff