include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/kernel.mk
-PKG_NAME:=kmod-rt2x00
+PKG_NAME:=rt2x00
+#PKG_VERSION:=cvs-20070725
PKG_VERSION:=git-200706018
include $(INCLUDE_DIR)/package.mk
AUTOLOAD:=$(call AutoLoad,27,rt61pci)
endef
+define KernelPackage/rt61-pci/install
+ mkdir -p $(1)/lib/firmware
+ $(CP) -L $(PKG_BUILD_DIR)/rt2?61*.bin $(1)/lib/firmware
+endef
+
define KernelPackage/rt73-usb
$(call Package/rt2x00/Default)
DEPENDS:=+kmod-rt2x00-usb
AUTOLOAD:=$(call AutoLoad,27,rt73usb)
endef
+define KernelPackage/rt73-usb/install
+ mkdir -p $(1)/lib/firmware
+ $(CP) -L $(PKG_BUILD_DIR)/rt73.bin $(1)/lib/firmware
+endef
+
define Build/Prepare
$(call Build/Prepare/Default)
$(CP) -r src/* $(PKG_BUILD_DIR)/
endef
define Build/Compile
+# $(MAKE) -C "$(PKG_BUILD_DIR)" config_header
$(MAKE) -C "$(LINUX_DIR)" \
CROSS_COMPILE="$(TARGET_CROSS)" \
- ARCH="$(LINUX_KARCH)" \
+ ARCH="$(LINUX_KARCH)" V="$(V)" \
SUBDIRS="$(PKG_BUILD_DIR)" \
KERNELVERSION="$(KERNEL)" \
KERNEL_SOURCE="$(LINUX_DIR)" \
- EXTRA_CFLAGS="$(BUILDFLAGS) -include $(PKG_BUILD_DIR)/rt2x00_compat.h" \
+ CFLAGS_MODULE="-DMODULE -include $(PKG_BUILD_DIR)/rt2x00_compat.h" \
KDIR="$(LINUX_DIR)"
endef
-rt2x00lib-objs := rt2x00dev.o rt2x00mac.o
+rt2x00lib-objs := rt2x00dev.o rt2x00mac.o rt2x00firmware.o
EXTRA_CFLAGS += -DCONFIG_RT2X00_LIB_FIRMWARE
#undef CONFIG_RT2X00_ASM
+#ifndef CONFIG_RT2X00_LIB_FIRMWARE
+#define CONFIG_RT2X00_LIB_FIRMWARE
+#endif
+
#ifndef CONFIG_RT2400PCI
#define CONFIG_RT2400PCI
#endif
#define CONFIG_RT73USB
#endif
-#ifndef CONFIG_D80211
-#define CONFIG_D80211
-#endif
-
-#ifndef CONFIG_D80211_DEBUG
-#define CONFIG_D80211_DEBUG
-#endif
-
-#undef CONFIG_D80211_ASM
-
-#ifndef CONFIG_CRC_ITU_T
-#define CONFIG_CRC_ITU_T
-#endif
-
-#undef CONFIG_CRC_ITU_T_ASM
-
-#ifndef CONFIG_EEPROM_93CX6
-#define CONFIG_EEPROM_93CX6
-#endif
-
-#undef CONFIG_EEPROM_93CX6_ASM
-
-#undef CONFIG_RFKILL
-
-#undef CONFIG_RFKILL_ASM
-
define KernelPackage/rt61/install
mkdir -p $(1)/lib/firmware
- $(CP) -L $(PKG_BUILD_DIR)/Module/rt2*.bin $(1)/lib/firmware
+ $(CP) -L $(PKG_BUILD_DIR)/Module/rt2?61*.bin $(1)/lib/firmware
endef
LINUX_PATCHLEVEL:=$(shell echo "$(LINUX_VERSION)" | cut -d. -f2)
--- /dev/null
+From: Ivo van Doorn <ivdoorn@gmail.com>
+Date: Mon, 14 May 2007 21:06:01 +0000 (+0200)
+Subject: [PATCH] eeprom_93cx6: Add comment for 1us delay after pulse
+X-Git-Tag: v2.6.23-rc1~1201^2~73
+X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Ftorvalds%2Flinux-2.6.git;a=commitdiff_plain;h=4b914dc0493edff19ff698a18198a173a14ba9d2
+
+[PATCH] eeprom_93cx6: Add comment for 1us delay after pulse
+
+This will add a comment for the 1us delay which is taken
+after the pulse has been switched. The 1us delay is based
+on the specifications so that should be made clear.
+
+Signed-off-by: Ivo van Doorn <IvDoorn@gmail.com>
+Signed-off-by: John W. Linville <linville@tuxdriver.com>
+---
+
+diff --git a/drivers/misc/eeprom_93cx6.c b/drivers/misc/eeprom_93cx6.c
+index bfcb434..0d6d742 100644
+--- a/drivers/misc/eeprom_93cx6.c
++++ b/drivers/misc/eeprom_93cx6.c
+@@ -39,6 +39,12 @@ static inline void eeprom_93cx6_pulse_high(struct eeprom_93cx6 *eeprom)
+ {
+ eeprom->reg_data_clock = 1;
+ eeprom->register_write(eeprom);
++
++ /*
++ * Add a short delay for the pulse to work.
++ * According to the specifications the minimal time
++ * should be 450ns so a 1us delay is sufficient.
++ */
+ udelay(1);
+ }
+
+@@ -46,6 +52,12 @@ static inline void eeprom_93cx6_pulse_low(struct eeprom_93cx6 *eeprom)
+ {
+ eeprom->reg_data_clock = 0;
+ eeprom->register_write(eeprom);
++
++ /*
++ * Add a short delay for the pulse to work.
++ * According to the specifications the minimal time
++ * should be 450ns so a 1us delay is sufficient.
++ */
+ udelay(1);
+ }
+
--- /dev/null
+From: John W. Linville <linville@tuxdriver.com>
+Date: Tue, 12 Jun 2007 01:37:46 +0000 (-0400)
+Subject: [PATCH] eeprom_93cx6: shorten pulse timing to match spec
+X-Git-Tag: v2.6.23-rc1~1201^2~71
+X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Ftorvalds%2Flinux-2.6.git;a=commitdiff_plain;h=7e9400f178d291b2208c4ed9aac0f425c1364000
+
+[PATCH] eeprom_93cx6: shorten pulse timing to match spec
+
+93cx6 datasheet available here:
+
+ http://ww1.microchip.com/downloads/en/DeviceDoc/21749F.pdf
+
+Figure 1-1 and Table 1-2 on pages 4-5 indicate that both Clock High
+Time and Clock Low Time have largest minimum times of 450ns.
+
+Signed-off-by: John W. Linville <linville@tuxdriver.com>
+---
+
+diff --git a/drivers/misc/eeprom_93cx6.c b/drivers/misc/eeprom_93cx6.c
+index 0d6d742..ac515b0 100644
+--- a/drivers/misc/eeprom_93cx6.c
++++ b/drivers/misc/eeprom_93cx6.c
+@@ -42,10 +42,10 @@ static inline void eeprom_93cx6_pulse_high(struct eeprom_93cx6 *eeprom)
+
+ /*
+ * Add a short delay for the pulse to work.
+- * According to the specifications the minimal time
+- * should be 450ns so a 1us delay is sufficient.
++ * According to the specifications the "maximum minimum"
++ * time should be 450ns.
+ */
+- udelay(1);
++ ndelay(450);
+ }
+
+ static inline void eeprom_93cx6_pulse_low(struct eeprom_93cx6 *eeprom)
--- /dev/null
+From: Francois Romieu <romieu@fr.zoreil.com>
+Date: Tue, 3 Jul 2007 22:31:44 +0000 (+0200)
+Subject: eeprom_93cx6: shorten pulse timing to match spec (bis)
+X-Git-Tag: v2.6.23-rc1~1151^2~11
+X-Git-Url: http://git.kernel.org/?p=linux%2Fkernel%2Fgit%2Ftorvalds%2Flinux-2.6.git;a=commitdiff_plain;h=8abd531e3f77188de2fc41e677d075cc66e61631
+
+eeprom_93cx6: shorten pulse timing to match spec (bis)
+
+Based on an original idea by John W. Linville.
+
+It is the missing part of 42d45ccd60636c28e35c2016f091783bc14ad99c
+
+Signed-off-by: Francois Romieu <romieu@fr.zoreil.com>
+Signed-off-by: Jeff Garzik <jeff@garzik.org>
+---
+
+diff --git a/drivers/misc/eeprom_93cx6.c b/drivers/misc/eeprom_93cx6.c
+index ac515b0..ea55654 100644
+--- a/drivers/misc/eeprom_93cx6.c
++++ b/drivers/misc/eeprom_93cx6.c
+@@ -55,10 +55,10 @@ static inline void eeprom_93cx6_pulse_low(struct eeprom_93cx6 *eeprom)
+
+ /*
+ * Add a short delay for the pulse to work.
+- * According to the specifications the minimal time
+- * should be 450ns so a 1us delay is sufficient.
++ * According to the specifications the "maximum minimum"
++ * time should be 450ns.
+ */
+- udelay(1);
++ ndelay(450);
+ }
+
+ static void eeprom_93cx6_startup(struct eeprom_93cx6 *eeprom)
ARCH:=i386
BOARD:=rdc
BOARDNAME:=RDC x86
-FEATURES:=squashfs jffs2 broken
+FEATURES:=squashfs jffs2
LINUX_VERSION:=2.6.22.1
ifneq ($(CONFIG_TARGET_ROOTFS_INITRAMFS),y)
define Kernel/SetInitramfs
+ echo "r6040 parent=wlan0" > $(BUILD_DIR)/root/etc/modules.d/99-r6040
rm -f $(BUILD_DIR)/root/sbin/init
ln -s /etc/preinit $(BUILD_DIR)/root/sbin/init
sed -i 's,exec /sbin/init,exec /bin/busybox init,g' $(BUILD_DIR)/root/etc/preinit
sed -i 's,/sbin/init,/bin/busybox init,g' $(BUILD_DIR)/root/init
+ sed -i 's,eth0,eth1,g' $(BUILD_DIR)/root/etc/config/network
endef
endif
# CONFIG_COMPAT_VDSO is not set
# CONFIG_CPU5_WDT is not set
# CONFIG_CPU_FREQ is not set
+CONFIG_CRC_ITU_T=y
CONFIG_CRYPTO_AES_586=m
CONFIG_CRYPTO_ARC4=y
CONFIG_CRYPTO_DEV_GEODE=m
# CONFIG_CRYPTO_DEV_PADLOCK is not set
+CONFIG_CRYPTO_ECB=y
CONFIG_CRYPTO_TWOFISH_586=m
# CONFIG_CS5535_GPIO is not set
# CONFIG_DCDBAS is not set
define Profile/ar525w
NAME:=AirLink101 AR525W
- PACKAGES:=kmod-rt61 kmod-r6040
+ PACKAGES:=kmod-rt61-pci kmod-r6040
endef
$(eval $(call Profile,ar525w))
define Profile/wl153
NAME:=Sitecom WL-153
- PACKAGES:=kmod-rt61 kmod-r6040
+ PACKAGES:=kmod-rt61-pci kmod-r6040
endef
$(eval $(call Profile,wl153))
projects / openwrt.git / commitdiff