--- /dev/null
+diff -Nrub linux-2.6.14/drivers/net/Kconfig linux-2.6.14-imq/drivers/net/Kconfig
+--- linux-2.6.14/drivers/net/Kconfig 2005-10-28 00:02:08.000000000 +0000
++++ linux-2.6.14-imq/drivers/net/Kconfig 2005-12-16 16:28:05.000000000 +0000
+@@ -82,6 +82,129 @@
+ To compile this driver as a module, choose M here: the module
+ will be called eql. If unsure, say N.
+
++config IMQ
++ tristate "IMQ (intermediate queueing device) support"
++ depends on NETDEVICES && NETFILTER
++ ---help---
++ The IMQ device(s) is used as placeholder for QoS queueing disciplines.
++ Every packet entering/leaving the IP stack can be directed through
++ the IMQ device where it's enqueued/dequeued to the attached qdisc.
++ This allows you to treat network devices as classes and distribute
++ bandwidth among them. Iptables is used to specify through which IMQ
++ device, if any, packets travel.
++
++ More information at: http://www.linuximq.net/
++
++ To compile this driver as a module, choose M here: the module
++ will be called imq. If unsure, say N.
++
++choice
++ prompt "IMQ behavior (PRE/POSTROUTING)"
++ depends on IMQ
++ default IMQ_BEHAVIOR_BA
++ help
++
++ This settings defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ IMQ can work in any of the following ways:
++
++ PREROUTING | POSTROUTING
++ -----------------|-------------------
++ #1 After NAT | After NAT
++ #2 After NAT | Before NAT
++ #3 Before NAT | After NAT
++ #4 Before NAT | Before NAT
++
++ The default behavior is to hook before NAT on PREROUTING
++ and after NAT on POSTROUTING (#3).
++
++ This settings are specially usefull when trying to use IMQ
++ to shape NATed clients.
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AA
++ bool "IMQ AA"
++ help
++ This settings defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ Choosing this option will make IMQ hook like this:
++
++ PREROUTING: After NAT
++ POSTROUTING: After NAT
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_AB
++ bool "IMQ AB"
++ help
++ This settings defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ Choosing this option will make IMQ hook like this:
++
++ PREROUTING: After NAT
++ POSTROUTING: Before NAT
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BA
++ bool "IMQ BA"
++ help
++ This settings defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ Choosing this option will make IMQ hook like this:
++
++ PREROUTING: Before NAT
++ POSTROUTING: After NAT
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++config IMQ_BEHAVIOR_BB
++ bool "IMQ BB"
++ help
++ This settings defines how IMQ behaves in respect to its
++ hooking in PREROUTING and POSTROUTING.
++
++ Choosing this option will make IMQ hook like this:
++
++ PREROUTING: Before NAT
++ POSTROUTING: Before NAT
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
++endchoice
++
++config IMQ_NUM_DEVS
++
++ int "Number of IMQ devices"
++ range 2 8
++ depends on IMQ
++ default "2"
++ help
++
++ This settings defines how many IMQ devices will be
++ created.
++
++ The default value is 2.
++
++ More information can be found at: www.linuximq.net
++
++ If not sure leave the default settings alone.
++
+ config TUN
+ tristate "Universal TUN/TAP device driver support"
+ select CRC32
+diff -Nrub linux-2.6.14/drivers/net/Makefile linux-2.6.14-imq/drivers/net/Makefile
+--- linux-2.6.14/drivers/net/Makefile 2005-10-28 00:02:08.000000000 +0000
++++ linux-2.6.14-imq/drivers/net/Makefile 2005-12-16 16:28:05.000000000 +0000
+@@ -119,6 +119,7 @@
+ endif
+
+ obj-$(CONFIG_DUMMY) += dummy.o
++obj-$(CONFIG_IMQ) += imq.o
+ obj-$(CONFIG_DE600) += de600.o
+ obj-$(CONFIG_DE620) += de620.o
+ obj-$(CONFIG_LANCE) += lance.o
+diff -Nrub linux-2.6.14/drivers/net/imq.c linux-2.6.14-imq/drivers/net/imq.c
+--- linux-2.6.14/drivers/net/imq.c 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.14-imq/drivers/net/imq.c 2005-12-16 16:49:02.000000000 +0000
+@@ -0,0 +1,403 @@
++/*
++ * Pseudo-driver for the intermediate queue device.
++ *
++ * This program is free software; you can redistribute it and/or
++ * modify it under the terms of the GNU General Public License
++ * as published by the Free Software Foundation; either version
++ * 2 of the License, or (at your option) any later version.
++ *
++ * Authors: Patrick McHardy, <kaber@trash.net>
++ *
++ * The first version was written by Martin Devera, <devik@cdi.cz>
++ *
++ * Credits: Jan Rafaj <imq2t@cedric.vabo.cz>
++ * - Update patch to 2.4.21
++ * Sebastian Strollo <sstrollo@nortelnetworks.com>
++ * - Fix "Dead-loop on netdevice imq"-issue
++ * Marcel Sebek <sebek64@post.cz>
++ * - Update to 2.6.2-rc1
++ *
++ * After some time of inactivity there is a group taking care
++ * of IMQ again: http://www.linuximq.net
++ *
++ *
++ * 2004/06/30 - New version of IMQ patch to kernels <=2.6.7 including
++ * the following changes:
++ *
++ * - Correction of ipv6 support "+"s issue (Hasso Tepper)
++ * - Correction of imq_init_devs() issue that resulted in
++ * kernel OOPS unloading IMQ as module (Norbert Buchmuller)
++ * - Addition of functionality to choose number of IMQ devices
++ * during kernel config (Andre Correa)
++ * - Addition of functionality to choose how IMQ hooks on
++ * PRE and POSTROUTING (after or before NAT) (Andre Correa)
++ * - Cosmetic corrections (Norbert Buchmuller) (Andre Correa)
++ *
++ *
++ * 2005/12/16 - IMQ versions between 2.6.7 and 2.6.13 were
++ * released with almost no problems. 2.6.14-x was released
++ * with some important changes: nfcache was removed; After
++ * some weeks of trouble we figured out that some IMQ fields
++ * in skb were missing in skbuff.c - skb_clone and copy_skb_header.
++ * These functions are correctly patched by this new patch version.
++ *
++ * Thanks for all who helped to figure out all the problems with
++ * 2.6.14.x: Patrick McHardy, Rune Kock, VeNoMouS, Max CtRiX,
++ * Kevin Shanahan, Richard Lucassen, Valery Dachev (hopefully
++ * I didn't forget anybody). I apologize again for my lack of time.
++ *
++ * More info at: http://www.linuximq.net/ (Andre Correa)
++ */
++
++#include <linux/config.h>
++#include <linux/module.h>
++#include <linux/kernel.h>
++#include <linux/moduleparam.h>
++#include <linux/skbuff.h>
++#include <linux/netdevice.h>
++#include <linux/rtnetlink.h>
++#include <linux/if_arp.h>
++#include <linux/netfilter.h>
++#include <linux/netfilter_ipv4.h>
++#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
++ #include <linux/netfilter_ipv6.h>
++#endif
++#include <linux/imq.h>
++#include <net/pkt_sched.h>
++
++static nf_hookfn imq_nf_hook;
++
++static struct nf_hook_ops imq_ingress_ipv4 = {
++ .hook = imq_nf_hook,
++ .owner = THIS_MODULE,
++ .pf = PF_INET,
++ .hooknum = NF_IP_PRE_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++ .priority = NF_IP_PRI_MANGLE + 1
++#else
++ .priority = NF_IP_PRI_NAT_DST + 1
++#endif
++};
++
++static struct nf_hook_ops imq_egress_ipv4 = {
++ .hook = imq_nf_hook,
++ .owner = THIS_MODULE,
++ .pf = PF_INET,
++ .hooknum = NF_IP_POST_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA)
++ .priority = NF_IP_PRI_LAST
++#else
++ .priority = NF_IP_PRI_NAT_SRC - 1
++#endif
++};
++
++#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
++static struct nf_hook_ops imq_ingress_ipv6 = {
++ .hook = imq_nf_hook,
++ .owner = THIS_MODULE,
++ .pf = PF_INET6,
++ .hooknum = NF_IP6_PRE_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++ .priority = NF_IP6_PRI_MANGLE + 1
++#else
++ .priority = NF_IP6_PRI_NAT_DST + 1
++#endif
++};
++
++static struct nf_hook_ops imq_egress_ipv6 = {
++ .hook = imq_nf_hook,
++ .owner = THIS_MODULE,
++ .pf = PF_INET6,
++ .hooknum = NF_IP6_POST_ROUTING,
++#if defined(CONFIG_IMQ_BEHAVIOR_AA) || defined(CONFIG_IMQ_BEHAVIOR_BA)
++ .priority = NF_IP6_PRI_LAST
++#else
++ .priority = NF_IP6_PRI_NAT_SRC - 1
++#endif
++};
++#endif
++
++#if defined(CONFIG_IMQ_NUM_DEVS)
++static unsigned int numdevs = CONFIG_IMQ_NUM_DEVS;
++#else
++static unsigned int numdevs = 2;
++#endif
++
++static struct net_device *imq_devs;
++
++static struct net_device_stats *imq_get_stats(struct net_device *dev)
++{
++ return (struct net_device_stats *)dev->priv;
++}
++
++/* called for packets kfree'd in qdiscs at places other than enqueue */
++static void imq_skb_destructor(struct sk_buff *skb)
++{
++ struct nf_info *info = skb->nf_info;
++
++ if (info) {
++ if (info->indev)
++ dev_put(info->indev);
++ if (info->outdev)
++ dev_put(info->outdev);
++ kfree(info);
++ }
++}
++
++static int imq_dev_xmit(struct sk_buff *skb, struct net_device *dev)
++{
++ struct net_device_stats *stats = (struct net_device_stats*) dev->priv;
++
++ stats->tx_bytes += skb->len;
++ stats->tx_packets++;
++
++ skb->imq_flags = 0;
++ skb->destructor = NULL;
++
++ dev->trans_start = jiffies;
++ nf_reinject(skb, skb->nf_info, NF_ACCEPT);
++ return 0;
++}
++
++static int imq_nf_queue(struct sk_buff *skb, struct nf_info *info, unsigned queue_num, void *data)
++{
++ struct net_device *dev;
++ struct net_device_stats *stats;
++ struct sk_buff *skb2 = NULL;
++ struct Qdisc *q;
++ unsigned int index = skb->imq_flags&IMQ_F_IFMASK;
++ int ret = -1;
++
++ if (index > numdevs)
++ return -1;
++
++ dev = imq_devs + index;
++ if (!(dev->flags & IFF_UP)) {
++ skb->imq_flags = 0;
++ nf_reinject(skb, info, NF_ACCEPT);
++ return 0;
++ }
++ dev->last_rx = jiffies;
++
++ if (skb->destructor) {
++ skb2 = skb;
++ skb = skb_clone(skb, GFP_ATOMIC);
++ if (!skb)
++ return -1;
++ }
++ skb->nf_info = info;
++
++ stats = (struct net_device_stats *)dev->priv;
++ stats->rx_bytes+= skb->len;
++ stats->rx_packets++;
++
++ spin_lock_bh(&dev->queue_lock);
++ q = dev->qdisc;
++ if (q->enqueue) {
++ q->enqueue(skb_get(skb), q);
++ if (skb_shared(skb)) {
++ skb->destructor = imq_skb_destructor;
++ kfree_skb(skb);
++ ret = 0;
++ }
++ }
++ if (spin_is_locked(&dev->xmit_lock))
++ netif_schedule(dev);
++ else
++
++ while (!netif_queue_stopped(dev) &&
++ qdisc_restart(dev)<0)
++ /* NOTHING */;
++
++ spin_unlock_bh(&dev->queue_lock);
++
++ if (skb2)
++ kfree_skb(ret ? skb : skb2);
++
++ return ret;
++}
++
++static struct nf_queue_handler nfqh = {
++ .name = "imq",
++ .outfn = imq_nf_queue,
++};
++
++static unsigned int imq_nf_hook(unsigned int hook, struct sk_buff **pskb,
++ const struct net_device *indev,
++ const struct net_device *outdev,
++ int (*okfn)(struct sk_buff *))
++{
++ if ((*pskb)->imq_flags & IMQ_F_ENQUEUE)
++ return NF_QUEUE;
++
++ return NF_ACCEPT;
++}
++
++
++static int __init imq_init_hooks(void)
++{
++ int err;
++
++ err = nf_register_queue_handler(PF_INET, &nfqh);
++ if (err > 0)
++ goto err1;
++ if ((err = nf_register_hook(&imq_ingress_ipv4)))
++ goto err2;
++ if ((err = nf_register_hook(&imq_egress_ipv4)))
++ goto err3;
++#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
++ if ((err = nf_register_queue_handler(PF_INET6, &nfqh)))
++ goto err4;
++ if ((err = nf_register_hook(&imq_ingress_ipv6)))
++ goto err5;
++ if ((err = nf_register_hook(&imq_egress_ipv6)))
++ goto err6;
++#endif
++
++ return 0;
++
++#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
++err6:
++ nf_unregister_hook(&imq_ingress_ipv6);
++err5:
++ nf_unregister_queue_handler(PF_INET6);
++err4:
++ nf_unregister_hook(&imq_egress_ipv6);
++#endif
++err3:
++ nf_unregister_hook(&imq_ingress_ipv4);
++err2:
++ nf_unregister_queue_handler(PF_INET);
++err1:
++ return err;
++}
++
++static void __exit imq_unhook(void)
++{
++ nf_unregister_hook(&imq_ingress_ipv4);
++ nf_unregister_hook(&imq_egress_ipv4);
++ nf_unregister_queue_handler(PF_INET);
++#if defined(CONFIG_IPV6) || defined (CONFIG_IPV6_MODULE)
++ nf_unregister_hook(&imq_ingress_ipv6);
++ nf_unregister_hook(&imq_egress_ipv6);
++ nf_unregister_queue_handler(PF_INET6);
++#endif
++}
++
++static int __init imq_dev_init(struct net_device *dev)
++{
++ dev->hard_start_xmit = imq_dev_xmit;
++ dev->type = ARPHRD_VOID;
++ dev->mtu = 1500;
++ dev->tx_queue_len = 30;
++ dev->flags = IFF_NOARP;
++ dev->priv = kmalloc(sizeof(struct net_device_stats), GFP_KERNEL);
++ if (dev->priv == NULL)
++ return -ENOMEM;
++ memset(dev->priv, 0, sizeof(struct net_device_stats));
++ dev->get_stats = imq_get_stats;
++
++ return 0;
++}
++
++static void imq_dev_uninit(struct net_device *dev)
++{
++ kfree(dev->priv);
++}
++
++static int __init imq_init_devs(void)
++{
++ struct net_device *dev;
++ int i,j;
++ j = numdevs;
++
++ if (!numdevs || numdevs > IMQ_MAX_DEVS) {
++ printk(KERN_ERR "IMQ: numdevs has to be betweed 1 and %u\n",
++ IMQ_MAX_DEVS);
++ return -EINVAL;
++ }
++
++ imq_devs = kmalloc(sizeof(struct net_device) * numdevs, GFP_KERNEL);
++ if (!imq_devs)
++ return -ENOMEM;
++ memset(imq_devs, 0, sizeof(struct net_device) * numdevs);
++
++ /* we start counting at zero */
++ numdevs--;
++
++ for (i = 0, dev = imq_devs; i <= numdevs; i++, dev++) {
++ SET_MODULE_OWNER(dev);
++ strcpy(dev->name, "imq%d");
++ dev->init = imq_dev_init;
++ dev->uninit = imq_dev_uninit;
++
++ if (register_netdev(dev) < 0)
++ goto err_register;
++ }
++ printk(KERN_INFO "IMQ starting with %u devices...\n", j);
++ return 0;
++
++err_register:
++ for (; i; i--)
++ unregister_netdev(--dev);
++ kfree(imq_devs);
++ return -EIO;
++}
++
++static void imq_cleanup_devs(void)
++{
++ int i;
++ struct net_device *dev = imq_devs;
++
++ for (i = 0; i <= numdevs; i++)
++ unregister_netdev(dev++);
++
++ kfree(imq_devs);
++}
++
++static int __init imq_init_module(void)
++{
++ int err;
++
++ if ((err = imq_init_devs())) {
++ printk(KERN_ERR "IMQ: Error trying imq_init_devs()\n");
++ return err;
++ }
++ if ((err = imq_init_hooks())) {
++ printk(KERN_ERR "IMQ: Error trying imq_init_hooks()\n");
++ imq_cleanup_devs();
++ return err;
++ }
++
++ printk(KERN_INFO "IMQ driver loaded successfully.\n");
++
++#if defined(CONFIG_IMQ_BEHAVIOR_BA) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++ printk(KERN_INFO "\tHooking IMQ before NAT on PREROUTING.\n");
++#else
++ printk(KERN_INFO "\tHooking IMQ after NAT on PREROUTING.\n");
++#endif
++#if defined(CONFIG_IMQ_BEHAVIOR_AB) || defined(CONFIG_IMQ_BEHAVIOR_BB)
++ printk(KERN_INFO "\tHooking IMQ before NAT on POSTROUTING.\n");
++#else
++ printk(KERN_INFO "\tHooking IMQ after NAT on POSTROUTING.\n");
++#endif
++
++ return 0;
++}
++
++static void __exit imq_cleanup_module(void)
++{
++ imq_unhook();
++ imq_cleanup_devs();
++ printk(KERN_INFO "IMQ driver unloaded successfully.\n");
++}
++
++
++module_init(imq_init_module);
++module_exit(imq_cleanup_module);
++
++module_param(numdevs, int, 0);
++MODULE_PARM_DESC(numdevs, "number of IMQ devices (how many imq* devices will be created)");
++MODULE_AUTHOR("http://www.linuximq.net");
++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information.");
++MODULE_LICENSE("GPL");
+diff -Nrub linux-2.6.14/include/linux/imq.h linux-2.6.14-imq/include/linux/imq.h
+--- linux-2.6.14/include/linux/imq.h 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.14-imq/include/linux/imq.h 2005-12-16 16:28:05.000000000 +0000
+@@ -0,0 +1,9 @@
++#ifndef _IMQ_H
++#define _IMQ_H
++
++#define IMQ_MAX_DEVS 16
++
++#define IMQ_F_IFMASK 0x7f
++#define IMQ_F_ENQUEUE 0x80
++
++#endif /* _IMQ_H */
+diff -Nrub linux-2.6.14/include/linux/netfilter_ipv4/ipt_IMQ.h linux-2.6.14-imq/include/linux/netfilter_ipv4/ipt_IMQ.h
+--- linux-2.6.14/include/linux/netfilter_ipv4/ipt_IMQ.h 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.14-imq/include/linux/netfilter_ipv4/ipt_IMQ.h 2005-12-16 16:28:05.000000000 +0000
+@@ -0,0 +1,8 @@
++#ifndef _IPT_IMQ_H
++#define _IPT_IMQ_H
++
++struct ipt_imq_info {
++ unsigned int todev; /* target imq device */
++};
++
++#endif /* _IPT_IMQ_H */
+diff -Nrub linux-2.6.14/include/linux/netfilter_ipv6/ip6t_IMQ.h linux-2.6.14-imq/include/linux/netfilter_ipv6/ip6t_IMQ.h
+--- linux-2.6.14/include/linux/netfilter_ipv6/ip6t_IMQ.h 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.14-imq/include/linux/netfilter_ipv6/ip6t_IMQ.h 2005-12-16 16:28:05.000000000 +0000
+@@ -0,0 +1,8 @@
++#ifndef _IP6T_IMQ_H
++#define _IP6T_IMQ_H
++
++struct ip6t_imq_info {
++ unsigned int todev; /* target imq device */
++};
++
++#endif /* _IP6T_IMQ_H */
+diff -Nrub linux-2.6.14/include/linux/skbuff.h linux-2.6.14-imq/include/linux/skbuff.h
+--- linux-2.6.14/include/linux/skbuff.h 2005-10-28 00:02:08.000000000 +0000
++++ linux-2.6.14-imq/include/linux/skbuff.h 2005-12-16 16:28:05.000000000 +0000
+@@ -271,6 +271,10 @@
+ #if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
+ __u8 ipvs_property:1;
+ #endif
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ unsigned char imq_flags;
++ struct nf_info *nf_info;
++#endif
+ #ifdef CONFIG_BRIDGE_NETFILTER
+ struct nf_bridge_info *nf_bridge;
+ #endif
+diff -Nrub linux-2.6.14/net/core/skbuff.c linux-2.6.14-imq/net/core/skbuff.c
+--- linux-2.6.14/net/core/skbuff.c 2005-10-28 00:02:08.000000000 +0000
++++ linux-2.6.14-imq/net/core/skbuff.c 2005-12-16 16:28:05.000000000 +0000
+@@ -413,6 +413,10 @@
+ #if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
+ C(ipvs_property);
+ #endif
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ C(imq_flags);
++ C(nf_info);
++#endif /*CONFIG_IMQ*/
+ #ifdef CONFIG_BRIDGE_NETFILTER
+ C(nf_bridge);
+ nf_bridge_get(skb->nf_bridge);
+@@ -473,6 +477,10 @@
+ #if defined(CONFIG_IP_VS) || defined(CONFIG_IP_VS_MODULE)
+ new->ipvs_property = old->ipvs_property;
+ #endif
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ new->imq_flags = old->imq_flags;
++ new->nf_info = old->nf_info;
++#endif /*CONFIG_IMQ*/
+ #ifdef CONFIG_BRIDGE_NETFILTER
+ new->nf_bridge = old->nf_bridge;
+ nf_bridge_get(old->nf_bridge);
+diff -Nrub linux-2.6.14/net/ipv4/netfilter/Kconfig linux-2.6.14-imq/net/ipv4/netfilter/Kconfig
+--- linux-2.6.14/net/ipv4/netfilter/Kconfig 2005-10-28 00:02:08.000000000 +0000
++++ linux-2.6.14-imq/net/ipv4/netfilter/Kconfig 2005-12-16 16:28:05.000000000 +0000
+@@ -489,6 +489,17 @@
+
+ To compile it as a module, choose M here. If unsure, say N.
+
++config IP_NF_TARGET_IMQ
++ tristate "IMQ target support"
++ depends on IP_NF_MANGLE
++ help
++ This option adds a `IMQ' target which is used to specify if and
++ to which IMQ device packets should get enqueued/dequeued.
++
++ For more information visit: http://www.linuximq.net/
++
++ To compile it as a module, choose M here. If unsure, say N.
++
+ config IP_NF_TARGET_LOG
+ tristate "LOG target support"
+ depends on IP_NF_IPTABLES
+diff -Nrub linux-2.6.14/net/ipv4/netfilter/Makefile linux-2.6.14-imq/net/ipv4/netfilter/Makefile
+--- linux-2.6.14/net/ipv4/netfilter/Makefile 2005-10-28 00:02:08.000000000 +0000
++++ linux-2.6.14-imq/net/ipv4/netfilter/Makefile 2005-12-16 16:28:05.000000000 +0000
+@@ -80,6 +80,7 @@
+ obj-$(CONFIG_IP_NF_TARGET_ECN) += ipt_ECN.o
+ obj-$(CONFIG_IP_NF_TARGET_DSCP) += ipt_DSCP.o
+ obj-$(CONFIG_IP_NF_TARGET_MARK) += ipt_MARK.o
++obj-$(CONFIG_IP_NF_TARGET_IMQ) += ipt_IMQ.o
+ obj-$(CONFIG_IP_NF_TARGET_MASQUERADE) += ipt_MASQUERADE.o
+ obj-$(CONFIG_IP_NF_TARGET_REDIRECT) += ipt_REDIRECT.o
+ obj-$(CONFIG_IP_NF_TARGET_NETMAP) += ipt_NETMAP.o
+diff -Nrub linux-2.6.14/net/ipv4/netfilter/ipt_IMQ.c linux-2.6.14-imq/net/ipv4/netfilter/ipt_IMQ.c
+--- linux-2.6.14/net/ipv4/netfilter/ipt_IMQ.c 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.14-imq/net/ipv4/netfilter/ipt_IMQ.c 2005-12-16 16:28:05.000000000 +0000
+@@ -0,0 +1,80 @@
++/*
++ * This target marks packets to be enqueued to an imq device
++ */
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/netfilter_ipv4/ip_tables.h>
++#include <linux/netfilter_ipv4/ipt_IMQ.h>
++#include <linux/imq.h>
++
++static unsigned int imq_target(struct sk_buff **pskb,
++ const struct net_device *in,
++ const struct net_device *out,
++ unsigned int hooknum,
++ const void *targinfo,
++ void *userdata)
++{
++ struct ipt_imq_info *mr = (struct ipt_imq_info*)targinfo;
++
++ (*pskb)->imq_flags = mr->todev | IMQ_F_ENQUEUE;
++
++ return IPT_CONTINUE;
++}
++
++static int imq_checkentry(const char *tablename,
++ const struct ipt_entry *e,
++ void *targinfo,
++ unsigned int targinfosize,
++ unsigned int hook_mask)
++{
++ struct ipt_imq_info *mr;
++
++ if (targinfosize != IPT_ALIGN(sizeof(struct ipt_imq_info))) {
++ printk(KERN_WARNING "IMQ: invalid targinfosize\n");
++ return 0;
++ }
++ mr = (struct ipt_imq_info*)targinfo;
++
++ if (strcmp(tablename, "mangle") != 0) {
++ printk(KERN_WARNING
++ "IMQ: IMQ can only be called from \"mangle\" table, not \"%s\"\n",
++ tablename);
++ return 0;
++ }
++
++ if (mr->todev > IMQ_MAX_DEVS) {
++ printk(KERN_WARNING
++ "IMQ: invalid device specified, highest is %u\n",
++ IMQ_MAX_DEVS);
++ return 0;
++ }
++
++ return 1;
++}
++
++static struct ipt_target ipt_imq_reg = {
++ .name = "IMQ",
++ .target = imq_target,
++ .checkentry = imq_checkentry,
++ .me = THIS_MODULE
++};
++
++static int __init init(void)
++{
++ if (ipt_register_target(&ipt_imq_reg))
++ return -EINVAL;
++
++ return 0;
++}
++
++static void __exit fini(void)
++{
++ ipt_unregister_target(&ipt_imq_reg);
++}
++
++module_init(init);
++module_exit(fini);
++
++MODULE_AUTHOR("http://www.linuximq.net");
++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information.");
++MODULE_LICENSE("GPL");
+diff -Nrub linux-2.6.14/net/ipv6/netfilter/Kconfig linux-2.6.14-imq/net/ipv6/netfilter/Kconfig
+--- linux-2.6.14/net/ipv6/netfilter/Kconfig 2005-10-28 00:02:08.000000000 +0000
++++ linux-2.6.14-imq/net/ipv6/netfilter/Kconfig 2005-12-16 16:28:05.000000000 +0000
+@@ -190,6 +190,15 @@
+
+ To compile it as a module, choose M here. If unsure, say N.
+
++config IP6_NF_TARGET_IMQ
++ tristate "IMQ target support"
++ depends on IP6_NF_MANGLE
++ help
++ This option adds a `IMQ' target which is used to specify if and
++ to which imq device packets should get enqueued/dequeued.
++
++ To compile it as a module, choose M here. If unsure, say N.
++
+ config IP6_NF_TARGET_LOG
+ tristate "LOG target support"
+ depends on IP6_NF_FILTER
+diff -Nrub linux-2.6.14/net/ipv6/netfilter/Makefile linux-2.6.14-imq/net/ipv6/netfilter/Makefile
+--- linux-2.6.14/net/ipv6/netfilter/Makefile 2005-10-28 00:02:08.000000000 +0000
++++ linux-2.6.14-imq/net/ipv6/netfilter/Makefile 2005-12-16 16:28:05.000000000 +0000
+@@ -6,6 +6,7 @@
+ obj-$(CONFIG_IP6_NF_IPTABLES) += ip6_tables.o
+ obj-$(CONFIG_IP6_NF_MATCH_LIMIT) += ip6t_limit.o
+ obj-$(CONFIG_IP6_NF_MATCH_MARK) += ip6t_mark.o
++obj-$(CONFIG_IP6_NF_TARGET_IMQ) += ip6t_IMQ.o
+ obj-$(CONFIG_IP6_NF_MATCH_LENGTH) += ip6t_length.o
+ obj-$(CONFIG_IP6_NF_MATCH_MAC) += ip6t_mac.o
+ obj-$(CONFIG_IP6_NF_MATCH_RT) += ip6t_rt.o
+diff -Nrub linux-2.6.14/net/ipv6/netfilter/ip6t_IMQ.c linux-2.6.14-imq/net/ipv6/netfilter/ip6t_IMQ.c
+--- linux-2.6.14/net/ipv6/netfilter/ip6t_IMQ.c 1970-01-01 00:00:00.000000000 +0000
++++ linux-2.6.14-imq/net/ipv6/netfilter/ip6t_IMQ.c 2005-12-16 16:28:05.000000000 +0000
+@@ -0,0 +1,80 @@
++/*
++ * This target marks packets to be enqueued to an imq device
++ */
++#include <linux/module.h>
++#include <linux/skbuff.h>
++#include <linux/netfilter_ipv6/ip6_tables.h>
++#include <linux/netfilter_ipv6/ip6t_IMQ.h>
++#include <linux/imq.h>
++
++static unsigned int imq_target(struct sk_buff **pskb,
++ unsigned int hooknum,
++ const struct net_device *in,
++ const struct net_device *out,
++ const void *targinfo,
++ void *userdata)
++{
++ struct ip6t_imq_info *mr = (struct ip6t_imq_info*)targinfo;
++
++ (*pskb)->imq_flags = mr->todev | IMQ_F_ENQUEUE;
++
++ return IP6T_CONTINUE;
++}
++
++static int imq_checkentry(const char *tablename,
++ const struct ip6t_entry *e,
++ void *targinfo,
++ unsigned int targinfosize,
++ unsigned int hook_mask)
++{
++ struct ip6t_imq_info *mr;
++
++ if (targinfosize != IP6T_ALIGN(sizeof(struct ip6t_imq_info))) {
++ printk(KERN_WARNING "IMQ: invalid targinfosize\n");
++ return 0;
++ }
++ mr = (struct ip6t_imq_info*)targinfo;
++
++ if (strcmp(tablename, "mangle") != 0) {
++ printk(KERN_WARNING
++ "IMQ: IMQ can only be called from \"mangle\" table, not \"%s\"\n",
++ tablename);
++ return 0;
++ }
++
++ if (mr->todev > IMQ_MAX_DEVS) {
++ printk(KERN_WARNING
++ "IMQ: invalid device specified, highest is %u\n",
++ IMQ_MAX_DEVS);
++ return 0;
++ }
++
++ return 1;
++}
++
++static struct ip6t_target ip6t_imq_reg = {
++ .name = "IMQ",
++ .target = imq_target,
++ .checkentry = imq_checkentry,
++ .me = THIS_MODULE
++};
++
++static int __init init(void)
++{
++ if (ip6t_register_target(&ip6t_imq_reg))
++ return -EINVAL;
++
++ return 0;
++}
++
++static void __exit fini(void)
++{
++ ip6t_unregister_target(&ip6t_imq_reg);
++}
++
++module_init(init);
++module_exit(fini);
++
++MODULE_AUTHOR("http://www.linuximq.net");
++MODULE_DESCRIPTION("Pseudo-driver for the intermediate queue device. See http://www.linuximq.net/ for more information.");
++MODULE_LICENSE("GPL");
+diff -Nrub linux-2.6.14/net/sched/sch_generic.c linux-2.6.14-imq/net/sched/sch_generic.c
+--- linux-2.6.14/net/sched/sch_generic.c 2005-10-28 00:02:08.000000000 +0000
++++ linux-2.6.14-imq/net/sched/sch_generic.c 2005-12-16 16:28:05.000000000 +0000
+@@ -29,6 +29,9 @@
+ #include <linux/netdevice.h>
+ #include <linux/skbuff.h>
+ #include <linux/rtnetlink.h>
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++#include <linux/imq.h>
++#endif
+ #include <linux/init.h>
+ #include <linux/rcupdate.h>
+ #include <linux/list.h>
+@@ -136,7 +139,13 @@
+
+ if (!netif_queue_stopped(dev)) {
+ int ret;
+- if (netdev_nit)
++
++ if (netdev_nit
++#if defined(CONFIG_IMQ) || defined(CONFIG_IMQ_MODULE)
++ && !(skb->imq_flags & IMQ_F_ENQUEUE)
++#endif
++ )
++
+ dev_queue_xmit_nit(skb, dev);
+
+ ret = dev->hard_start_xmit(skb, dev);
projects / openwrt.git / commitdiff