From: florian <florian@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Sat, 13 Jun 2009 15:56:21 +0000 (+0000)
Subject: [package] recognize WAP54Gv2 and assigne LED and GPIOs (#5335)
X-Git-Url: https://git.rohieb.name/openwrt.git/commitdiff_plain/270465f3a0e4c09b2d4f9c5b1ac10a83e2841cf5?ds=inline;hp=49d34155494e7e1625855003bcbb240d2c1fe051

[package] recognize WAP54Gv2 and assigne LED and GPIOs (#5335)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@16434 3c298f89-4303-0410-b956-a3cf2f4a3e73
---

diff --git a/package/broadcom-diag/src/diag.c b/package/broadcom-diag/src/diag.c
index c8c0e34ab..4667591a1 100644
--- a/package/broadcom-diag/src/diag.c
+++ b/package/broadcom-diag/src/diag.c
@@ -54,6 +54,7 @@ module_param(gpiomask, int, 0644);
 enum {
 	/* Linksys */
 	WAP54GV1,
+	WAP54GV2,
 	WAP54GV3,
 	WRT54GV1,
 	WRT54G,
@@ -166,6 +167,16 @@ static struct platform_t __initdata platforms[] = {
 			{ .name = "wlan",	.gpio = 1 << 4 },
 		},
 	},
+	[WAP54GV2] = {
+		.name		= "Linksys WAP54G V2",
+		.buttons	= {
+			{ .name = "reset",	.gpio = 1 << 0 },
+		},
+		.leds		= {
+			{ .name = "wlan",	.gpio = 1 << 5, .polarity = REVERSE },
+			/* GPIO 6 is b44 (eth0, LAN) PHY power */
+		},
+	},
 	[WAP54GV3] = {
 		.name		= "Linksys WAP54G V3",
 		.buttons	= {
@@ -839,6 +850,8 @@ static struct platform_t __init *platform_detect(void)
 			/* default to WRT54G */
 			return &platforms[WRT54G];
 		}
+		if (!strcmp(boardnum, "1024") && !strcmp(boardtype, "0x0446"))
+			return &platforms[WAP54GV2];
 
 		if (!strcmp(boardnum, "44") || !strcmp(boardnum, "44\r")) {
 			if (!strcmp(boardtype,"0x0101") || !strcmp(boardtype, "0x0101\r"))