From: nico Date: Thu, 3 Nov 2005 02:38:38 +0000 (+0000) Subject: add 2.6 support for x86 X-Git-Url: https://git.rohieb.name/openwrt.git/commitdiff_plain/5c8a9ed64d4bccdc01eec87d3f8702484fa43a85 add 2.6 support for x86 git-svn-id: svn://svn.openwrt.org/openwrt/trunk@2320 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- diff --git a/openwrt/target/linux/Config.in b/openwrt/target/linux/Config.in index 443dca463..8f4ac1880 100644 --- a/openwrt/target/linux/Config.in +++ b/openwrt/target/linux/Config.in @@ -36,6 +36,14 @@ config BR2_LINUX_2_6_BRCM Build firmware images for Broadcom based routers (e.g. Netgear WGT634u) +config BR2_LINUX_2_6_X86 + bool "Support for x86 boards [2.6]" + default n + depends BR2_i386 + help + Build firmware images for x86 based boards + (e.g. Soekris net4521 and net4801, PC Engines WRAP...) + endchoice comment "Device specific modules" diff --git a/openwrt/target/linux/Makefile b/openwrt/target/linux/Makefile index 7949994f1..02ed636d1 100644 --- a/openwrt/target/linux/Makefile +++ b/openwrt/target/linux/Makefile @@ -87,3 +87,4 @@ $(eval $(call kernel_template,2.4,brcm,2_4_BRCM)) $(eval $(call kernel_template,2.4,ar7,2_4_AR7)) $(eval $(call kernel_template,2.4,x86,2_4_X86)) $(eval $(call kernel_template,2.6,brcm,2_6_BRCM)) +$(eval $(call kernel_template,2.6,x86,2_6_X86)) diff --git a/openwrt/target/linux/linux-2.6/Makefile b/openwrt/target/linux/linux-2.6/Makefile index 9bd1e7c90..06ac2c6d7 100644 --- a/openwrt/target/linux/linux-2.6/Makefile +++ b/openwrt/target/linux/linux-2.6/Makefile @@ -47,6 +47,10 @@ include $(LINUX_KCONFIG) INSTALL_TARGETS := $(KERNEL_IPKG) TARGETS := +ifeq ($(BOARD),x86) +include ./x86.mk +endif + # Networking diff --git a/openwrt/target/linux/linux-2.6/config/x86 b/openwrt/target/linux/linux-2.6/config/x86 new file mode 100644 index 000000000..8fa00466b --- /dev/null +++ b/openwrt/target/linux/linux-2.6/config/x86 @@ -0,0 +1,1827 @@ +# +# Automatically generated make config: don't edit +# Linux kernel version: 2.6.12.5 +# Sun Oct 23 22:54:55 2005 +# +CONFIG_X86=y +CONFIG_MMU=y +CONFIG_UID16=y +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_IOMAP=y + +# +# Code maturity level options +# +CONFIG_EXPERIMENTAL=y +CONFIG_CLEAN_COMPILE=y +CONFIG_BROKEN_ON_SMP=y +CONFIG_INIT_ENV_ARG_LIMIT=32 + +# +# General setup +# +CONFIG_LOCALVERSION="" +CONFIG_SWAP=y +CONFIG_SYSVIPC=y +# CONFIG_POSIX_MQUEUE is not set +# CONFIG_BSD_PROCESS_ACCT is not set +CONFIG_SYSCTL=y +# CONFIG_AUDIT is not set +CONFIG_HOTPLUG=y +CONFIG_KOBJECT_UEVENT=y +# CONFIG_IKCONFIG is not set +CONFIG_EMBEDDED=y +# CONFIG_KALLSYMS is not set +CONFIG_PRINTK=y +CONFIG_BUG=y +CONFIG_BASE_FULL=y +CONFIG_FUTEX=y +CONFIG_EPOLL=y +CONFIG_CC_OPTIMIZE_FOR_SIZE=y +CONFIG_SHMEM=y +CONFIG_CC_ALIGN_FUNCTIONS=0 +CONFIG_CC_ALIGN_LABELS=0 +CONFIG_CC_ALIGN_LOOPS=0 +CONFIG_CC_ALIGN_JUMPS=0 +# CONFIG_TINY_SHMEM is not set +CONFIG_BASE_SMALL=0 + +# +# Loadable module support +# +CONFIG_MODULES=y +CONFIG_MODULE_UNLOAD=y +# CONFIG_MODULE_FORCE_UNLOAD is not set +CONFIG_OBSOLETE_MODPARM=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_KMOD is not set + +# +# Processor type and features +# +CONFIG_X86_PC=y +# CONFIG_X86_ELAN is not set +# CONFIG_X86_VOYAGER is not set +# CONFIG_X86_NUMAQ is not set +# CONFIG_X86_SUMMIT is not set +# CONFIG_X86_BIGSMP is not set +# CONFIG_X86_VISWS is not set +# CONFIG_X86_GENERICARCH is not set +# CONFIG_X86_ES7000 is not set +# CONFIG_M386 is not set +# CONFIG_M486 is not set +# CONFIG_M586 is not set +# CONFIG_M586TSC is not set +# CONFIG_M586MMX is not set +# CONFIG_M686 is not set +# CONFIG_MPENTIUMII is not set +# CONFIG_MPENTIUMIII is not set +# CONFIG_MPENTIUMM is not set +# CONFIG_MPENTIUM4 is not set +# CONFIG_MK6 is not set +# CONFIG_MK7 is not set +# CONFIG_MK8 is not set +# CONFIG_MCRUSOE is not set +# CONFIG_MEFFICEON is not set +# CONFIG_MWINCHIPC6 is not set +# CONFIG_MWINCHIP2 is not set +# CONFIG_MWINCHIP3D is not set +CONFIG_MGEODEGX1=y +# CONFIG_MCYRIXIII is not set +# CONFIG_MVIAC3_2 is not set +# CONFIG_X86_GENERIC is not set +CONFIG_X86_CMPXCHG=y +CONFIG_X86_XADD=y +CONFIG_X86_L1_CACHE_SHIFT=5 +CONFIG_RWSEM_XCHGADD_ALGORITHM=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_X86_PPRO_FENCE=y +CONFIG_X86_WP_WORKS_OK=y +CONFIG_X86_INVLPG=y +CONFIG_X86_BSWAP=y +CONFIG_X86_POPAD_OK=y +CONFIG_X86_ALIGNMENT_16=y +# CONFIG_HPET_TIMER is not set +CONFIG_SCx200HR_TIMER=y +# CONFIG_SMP is not set +# CONFIG_PREEMPT is not set +# CONFIG_X86_UP_APIC is not set +CONFIG_X86_TSC=y +# CONFIG_X86_MCE is not set +# CONFIG_TOSHIBA is not set +# CONFIG_I8K is not set +# CONFIG_X86_REBOOTFIXUPS is not set +# CONFIG_MICROCODE is not set +# CONFIG_X86_MSR is not set +# CONFIG_X86_CPUID is not set + +# +# Firmware Drivers +# +# CONFIG_EDD is not set +CONFIG_NOHIGHMEM=y +# CONFIG_HIGHMEM4G is not set +# CONFIG_HIGHMEM64G is not set +# CONFIG_MATH_EMULATION is not set +# CONFIG_MTRR is not set +# CONFIG_REGPARM is not set +# CONFIG_SECCOMP is not set + +# +# Power management options (ACPI, APM) +# +# CONFIG_PM is not set + +# +# ACPI (Advanced Configuration and Power Interface) Support +# +# CONFIG_ACPI is not set + +# +# CPU Frequency scaling +# +CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_TABLE=y +# CONFIG_CPU_FREQ_DEBUG is not set +CONFIG_CPU_FREQ_STAT=y +CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set +CONFIG_CPU_FREQ_GOV_PERFORMANCE=y +# CONFIG_CPU_FREQ_GOV_POWERSAVE is not set +# CONFIG_CPU_FREQ_GOV_USERSPACE is not set +# CONFIG_CPU_FREQ_GOV_ONDEMAND is not set +# CONFIG_CPU_FREQ_GOV_CONSERVATIVE is not set + +# +# CPUFreq processor drivers +# +# CONFIG_X86_POWERNOW_K6 is not set +# CONFIG_X86_POWERNOW_K7 is not set +# CONFIG_X86_POWERNOW_K8 is not set +CONFIG_X86_GX_SUSPMOD=m +# CONFIG_X86_SPEEDSTEP_CENTRINO is not set +# CONFIG_X86_SPEEDSTEP_ICH is not set +# CONFIG_X86_SPEEDSTEP_SMI is not set +# CONFIG_X86_P4_CLOCKMOD is not set +# CONFIG_X86_CPUFREQ_NFORCE2 is not set +# CONFIG_X86_LONGRUN is not set +# CONFIG_X86_LONGHAUL is not set + +# +# shared options +# +# CONFIG_X86_SPEEDSTEP_LIB is not set + +# +# Bus options (PCI, PCMCIA, EISA, MCA, ISA) +# +CONFIG_PCI=y +# CONFIG_PCI_GOBIOS is not set +# CONFIG_PCI_GOMMCONFIG is not set +# CONFIG_PCI_GODIRECT is not set +CONFIG_PCI_GOANY=y +CONFIG_PCI_BIOS=y +CONFIG_PCI_DIRECT=y +# CONFIG_PCIEPORTBUS is not set +# CONFIG_PCI_LEGACY_PROC is not set +CONFIG_PCI_NAMES=y +CONFIG_ISA_DMA_API=y +CONFIG_ISA=y +# CONFIG_EISA is not set +# CONFIG_MCA is not set +CONFIG_SCx200=y + +# +# PCCARD (PCMCIA/CardBus) support +# +CONFIG_PCCARD=m +# CONFIG_PCMCIA_DEBUG is not set +CONFIG_PCMCIA=m +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=m +# CONFIG_PD6729 is not set +# CONFIG_I82092 is not set +# CONFIG_I82365 is not set +# CONFIG_TCIC is not set +CONFIG_PCMCIA_PROBE=y +CONFIG_PCCARD_NONSTATIC=m + +# +# PCI Hotplug Support +# +# CONFIG_HOTPLUG_PCI is not set + +# +# Executable file formats +# +CONFIG_BINFMT_ELF=y +# CONFIG_BINFMT_AOUT is not set +# CONFIG_BINFMT_MISC is not set + +# +# Device Drivers +# + +# +# Generic Driver Options +# +CONFIG_STANDALONE=y +CONFIG_PREVENT_FIRMWARE_BUILD=y +CONFIG_FW_LOADER=m + +# +# Memory Technology Devices (MTD) +# +CONFIG_MTD=y +# CONFIG_MTD_DEBUG is not set +# CONFIG_MTD_CONCAT is not set +CONFIG_MTD_PARTITIONS=y +# CONFIG_MTD_REDBOOT_PARTS is not set +# CONFIG_MTD_CMDLINE_PARTS is not set + +# +# User Modules And Translation Layers +# +CONFIG_MTD_CHAR=y +CONFIG_MTD_BLOCK=y +# CONFIG_FTL is not set +# CONFIG_NFTL is not set +# CONFIG_INFTL is not set + +# +# RAM/ROM/Flash chip drivers +# +# CONFIG_MTD_CFI is not set +# CONFIG_MTD_JEDECPROBE is not set +CONFIG_MTD_MAP_BANK_WIDTH_1=y +CONFIG_MTD_MAP_BANK_WIDTH_2=y +CONFIG_MTD_MAP_BANK_WIDTH_4=y +# CONFIG_MTD_MAP_BANK_WIDTH_8 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_16 is not set +# CONFIG_MTD_MAP_BANK_WIDTH_32 is not set +CONFIG_MTD_CFI_I1=y +CONFIG_MTD_CFI_I2=y +# CONFIG_MTD_CFI_I4 is not set +# CONFIG_MTD_CFI_I8 is not set +# CONFIG_MTD_RAM is not set +# CONFIG_MTD_ROM is not set +# CONFIG_MTD_ABSENT is not set + +# +# Mapping drivers for chip access +# +# CONFIG_MTD_COMPLEX_MAPPINGS is not set + +# +# Self-contained MTD device drivers +# +# CONFIG_MTD_PMC551 is not set +# CONFIG_MTD_SLRAM is not set +# CONFIG_MTD_PHRAM is not set +# CONFIG_MTD_MTDRAM is not set +CONFIG_MTD_BLKMTD=y +# CONFIG_MTD_BLOCK2MTD is not set + +# +# Disk-On-Chip Device Drivers +# +# CONFIG_MTD_DOC2000 is not set +# CONFIG_MTD_DOC2001 is not set +# CONFIG_MTD_DOC2001PLUS is not set + +# +# NAND Flash Device Drivers +# +# CONFIG_MTD_NAND is not set + +# +# Parallel port support +# +# CONFIG_PARPORT is not set + +# +# Plug and Play support +# +CONFIG_PNP=y +# CONFIG_PNP_DEBUG is not set + +# +# Protocols +# +CONFIG_ISAPNP=y +# CONFIG_PNPBIOS is not set + +# +# Block devices +# +# CONFIG_BLK_DEV_FD is not set +# CONFIG_BLK_DEV_XD is not set +# CONFIG_BLK_CPQ_DA is not set +# CONFIG_BLK_CPQ_CISS_DA is not set +# CONFIG_BLK_DEV_DAC960 is not set +# CONFIG_BLK_DEV_UMEM is not set +# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_BLK_DEV_LOOP=m +CONFIG_BLK_DEV_CRYPTOLOOP=m +CONFIG_BLK_DEV_NBD=m +# CONFIG_BLK_DEV_SX8 is not set +# CONFIG_BLK_DEV_UB is not set +# CONFIG_BLK_DEV_RAM is not set +CONFIG_BLK_DEV_RAM_COUNT=16 +CONFIG_INITRAMFS_SOURCE="" +# CONFIG_LBD is not set +# CONFIG_CDROM_PKTCDVD is not set + +# +# IO Schedulers +# +CONFIG_IOSCHED_NOOP=y +CONFIG_IOSCHED_AS=y +# CONFIG_IOSCHED_DEADLINE is not set +# CONFIG_IOSCHED_CFQ is not set +# CONFIG_ATA_OVER_ETH is not set + +# +# ATA/ATAPI/MFM/RLL support +# +CONFIG_IDE=y +CONFIG_BLK_DEV_IDE=y + +# +# Please see Documentation/ide.txt for help/info on IDE drives +# +# CONFIG_BLK_DEV_IDE_SATA is not set +# CONFIG_BLK_DEV_HD_IDE is not set +CONFIG_BLK_DEV_IDEDISK=y +# CONFIG_IDEDISK_MULTI_MODE is not set +# CONFIG_BLK_DEV_IDECS is not set +# CONFIG_BLK_DEV_IDECD is not set +# CONFIG_BLK_DEV_IDETAPE is not set +# CONFIG_BLK_DEV_IDEFLOPPY is not set +# CONFIG_BLK_DEV_IDESCSI is not set +# CONFIG_IDE_TASK_IOCTL is not set + +# +# IDE chipset support/bugfixes +# +# CONFIG_IDE_GENERIC is not set +# CONFIG_BLK_DEV_CMD640 is not set +# CONFIG_BLK_DEV_IDEPNP is not set +CONFIG_BLK_DEV_IDEPCI=y +CONFIG_IDEPCI_SHARE_IRQ=y +# CONFIG_BLK_DEV_OFFBOARD is not set +# CONFIG_BLK_DEV_GENERIC is not set +# CONFIG_BLK_DEV_OPTI621 is not set +# CONFIG_BLK_DEV_RZ1000 is not set +CONFIG_BLK_DEV_IDEDMA_PCI=y +# CONFIG_BLK_DEV_IDEDMA_FORCED is not set +CONFIG_IDEDMA_PCI_AUTO=y +# CONFIG_IDEDMA_ONLYDISK is not set +# CONFIG_BLK_DEV_AEC62XX is not set +# CONFIG_BLK_DEV_ALI15X3 is not set +# CONFIG_BLK_DEV_AMD74XX is not set +# CONFIG_BLK_DEV_ATIIXP is not set +# CONFIG_BLK_DEV_CMD64X is not set +# CONFIG_BLK_DEV_TRIFLEX is not set +# CONFIG_BLK_DEV_CY82C693 is not set +# CONFIG_BLK_DEV_CS5520 is not set +# CONFIG_BLK_DEV_CS5530 is not set +# CONFIG_BLK_DEV_HPT34X is not set +# CONFIG_BLK_DEV_HPT366 is not set +CONFIG_BLK_DEV_SC1200=y +# CONFIG_BLK_DEV_PIIX is not set +# CONFIG_BLK_DEV_NS87415 is not set +# CONFIG_BLK_DEV_PDC202XX_OLD is not set +# CONFIG_BLK_DEV_PDC202XX_NEW is not set +# CONFIG_BLK_DEV_SVWKS is not set +# CONFIG_BLK_DEV_SIIMAGE is not set +# CONFIG_BLK_DEV_SIS5513 is not set +# CONFIG_BLK_DEV_SLC90E66 is not set +# CONFIG_BLK_DEV_TRM290 is not set +# CONFIG_BLK_DEV_VIA82CXXX is not set +# CONFIG_IDE_ARM is not set +# CONFIG_IDE_CHIPSETS is not set +CONFIG_BLK_DEV_IDEDMA=y +# CONFIG_IDEDMA_IVB is not set +CONFIG_IDEDMA_AUTO=y +# CONFIG_BLK_DEV_HD is not set + +# +# SCSI device support +# +CONFIG_SCSI=m +CONFIG_SCSI_PROC_FS=y + +# +# SCSI support type (disk, tape, CD-ROM) +# +CONFIG_BLK_DEV_SD=m +# CONFIG_CHR_DEV_ST is not set +# CONFIG_CHR_DEV_OSST is not set +# CONFIG_BLK_DEV_SR is not set +# CONFIG_CHR_DEV_SG is not set + +# +# Some SCSI devices (e.g. CD jukebox) support multiple LUNs +# +# CONFIG_SCSI_MULTI_LUN is not set +# CONFIG_SCSI_CONSTANTS is not set +# CONFIG_SCSI_LOGGING is not set + +# +# SCSI Transport Attributes +# +# CONFIG_SCSI_SPI_ATTRS is not set +# CONFIG_SCSI_FC_ATTRS is not set +# CONFIG_SCSI_ISCSI_ATTRS is not set + +# +# SCSI low-level drivers +# +# CONFIG_BLK_DEV_3W_XXXX_RAID is not set +# CONFIG_SCSI_3W_9XXX is not set +# CONFIG_SCSI_7000FASST is not set +# CONFIG_SCSI_ACARD is not set +# CONFIG_SCSI_AHA152X is not set +# CONFIG_SCSI_AHA1542 is not set +# CONFIG_SCSI_AACRAID is not set +# CONFIG_SCSI_AIC7XXX is not set +# CONFIG_SCSI_AIC7XXX_OLD is not set +# CONFIG_SCSI_AIC79XX is not set +# CONFIG_SCSI_DPT_I2O is not set +# CONFIG_SCSI_IN2000 is not set +# CONFIG_MEGARAID_NEWGEN is not set +# CONFIG_MEGARAID_LEGACY is not set +# CONFIG_SCSI_SATA is not set +# CONFIG_SCSI_BUSLOGIC is not set +# CONFIG_SCSI_DMX3191D is not set +# CONFIG_SCSI_DTC3280 is not set +# CONFIG_SCSI_EATA is not set +# CONFIG_SCSI_FUTURE_DOMAIN is not set +# CONFIG_SCSI_GDTH is not set +# CONFIG_SCSI_GENERIC_NCR5380 is not set +# CONFIG_SCSI_GENERIC_NCR5380_MMIO is not set +# CONFIG_SCSI_IPS is not set +# CONFIG_SCSI_INITIO is not set +# CONFIG_SCSI_INIA100 is not set +# CONFIG_SCSI_NCR53C406A is not set +# CONFIG_SCSI_SYM53C8XX_2 is not set +# CONFIG_SCSI_IPR is not set +# CONFIG_SCSI_PAS16 is not set +# CONFIG_SCSI_PSI240I is not set +# CONFIG_SCSI_QLOGIC_FAS is not set +# CONFIG_SCSI_QLOGIC_FC is not set +# CONFIG_SCSI_QLOGIC_1280 is not set +# CONFIG_SCSI_QLA2XXX is not set +# CONFIG_SCSI_QLA21XX is not set +# CONFIG_SCSI_QLA22XX is not set +# CONFIG_SCSI_QLA2300 is not set +# CONFIG_SCSI_QLA2322 is not set +# CONFIG_SCSI_QLA6312 is not set +# CONFIG_SCSI_LPFC is not set +# CONFIG_SCSI_SYM53C416 is not set +# CONFIG_SCSI_DC395x is not set +# CONFIG_SCSI_DC390T is not set +# CONFIG_SCSI_T128 is not set +# CONFIG_SCSI_U14_34F is not set +# CONFIG_SCSI_ULTRASTOR is not set +# CONFIG_SCSI_NSP32 is not set +# CONFIG_SCSI_DEBUG is not set + +# +# PCMCIA SCSI adapter support +# +# CONFIG_PCMCIA_AHA152X is not set +# CONFIG_PCMCIA_FDOMAIN is not set +# CONFIG_PCMCIA_NINJA_SCSI is not set +# CONFIG_PCMCIA_QLOGIC is not set +# CONFIG_PCMCIA_SYM53C500 is not set + +# +# Old CD-ROM drivers (not SCSI, not IDE) +# +# CONFIG_CD_NO_IDESCSI is not set + +# +# Multi-device support (RAID and LVM) +# +# CONFIG_MD is not set + +# +# Fusion MPT device support +# +# CONFIG_FUSION is not set + +# +# IEEE 1394 (FireWire) support +# +# CONFIG_IEEE1394 is not set + +# +# I2O device support +# +# CONFIG_I2O is not set + +# +# Networking support +# +CONFIG_NET=y + +# +# Networking options +# +CONFIG_PACKET=y +CONFIG_PACKET_MMAP=y +CONFIG_UNIX=y +# CONFIG_NET_KEY is not set +CONFIG_RING=y +CONFIG_INET=y +CONFIG_IP_MULTICAST=y +CONFIG_IP_ADVANCED_ROUTER=y +CONFIG_IP_MULTIPLE_TABLES=y +CONFIG_IP_ROUTE_FWMARK=y +CONFIG_IP_ROUTE_MULTIPATH=y +# CONFIG_IP_ROUTE_MULTIPATH_CACHED is not set +# CONFIG_IP_ROUTE_VERBOSE is not set +# CONFIG_IP_PNP is not set +CONFIG_NET_IPIP=m +CONFIG_NET_IPGRE=m +# CONFIG_NET_IPGRE_BROADCAST is not set +# CONFIG_IP_MROUTE is not set +# CONFIG_ARPD is not set +# CONFIG_SYN_COOKIES is not set +# CONFIG_INET_AH is not set +# CONFIG_INET_ESP is not set +# CONFIG_INET_IPCOMP is not set +# CONFIG_INET_TUNNEL is not set +CONFIG_IPSEC_NAT_TRAVERSAL=y +# CONFIG_IP_TCPDIAG is not set +# CONFIG_IP_TCPDIAG_IPV6 is not set + +# +# IP: Virtual Server Configuration +# +# CONFIG_IP_VS is not set +CONFIG_IPV6=m +# CONFIG_IPV6_PRIVACY is not set +# CONFIG_INET6_AH is not set +# CONFIG_INET6_ESP is not set +# CONFIG_INET6_IPCOMP is not set +# CONFIG_INET6_TUNNEL is not set +# CONFIG_IPV6_TUNNEL is not set +CONFIG_NETFILTER=y +# CONFIG_NETFILTER_DEBUG is not set +# CONFIG_BRIDGE_NETFILTER is not set + +# +# IP: Netfilter Configuration +# +CONFIG_IP_NF_CONNTRACK=y +CONFIG_IP_NF_CT_ACCT=y +# CONFIG_IP_NF_CONNTRACK_MARK is not set +# CONFIG_IP_NF_CT_PROTO_SCTP is not set +CONFIG_IP_NF_FTP=y +CONFIG_IP_NF_IRC=m +CONFIG_IP_NF_TFTP=m +CONFIG_IP_NF_AMANDA=m +CONFIG_IP_NF_QUEUE=y +CONFIG_IP_NF_IPTABLES=y +CONFIG_IP_NF_MATCH_LIMIT=m +CONFIG_IP_NF_MATCH_IPRANGE=m +CONFIG_IP_NF_MATCH_MAC=m +CONFIG_IP_NF_MATCH_LAYER7=m +# CONFIG_IP_NF_MATCH_LAYER7_DEBUG is not set +CONFIG_IP_NF_MATCH_LAYER7_MAXDATALEN=2048 +# CONFIG_IP_NF_MATCH_PKTTYPE is not set +CONFIG_IP_NF_MATCH_MARK=m +CONFIG_IP_NF_MATCH_MULTIPORT=m +CONFIG_IP_NF_MATCH_TOS=m +CONFIG_IP_NF_MATCH_RECENT=m +CONFIG_IP_NF_MATCH_ECN=m +CONFIG_IP_NF_MATCH_DSCP=m +CONFIG_IP_NF_MATCH_AH_ESP=m +CONFIG_IP_NF_MATCH_LENGTH=m +CONFIG_IP_NF_MATCH_TTL=m +CONFIG_IP_NF_MATCH_TCPMSS=y +CONFIG_IP_NF_MATCH_HELPER=m +CONFIG_IP_NF_MATCH_STATE=y +CONFIG_IP_NF_MATCH_CONNTRACK=m +CONFIG_IP_NF_MATCH_OWNER=m +# CONFIG_IP_NF_MATCH_ADDRTYPE is not set +# CONFIG_IP_NF_MATCH_REALM is not set +# CONFIG_IP_NF_MATCH_SCTP is not set +# CONFIG_IP_NF_MATCH_COMMENT is not set +# CONFIG_IP_NF_MATCH_HASHLIMIT is not set +CONFIG_IP_NF_FILTER=y +CONFIG_IP_NF_TARGET_REJECT=y +CONFIG_IP_NF_TARGET_LOG=m +CONFIG_IP_NF_TARGET_ULOG=m +CONFIG_IP_NF_TARGET_TCPMSS=y +CONFIG_IP_NF_NAT=y +CONFIG_IP_NF_NAT_NEEDED=y +CONFIG_IP_NF_TARGET_MASQUERADE=y +CONFIG_IP_NF_TARGET_REDIRECT=y +CONFIG_IP_NF_TARGET_NETMAP=m +# CONFIG_IP_NF_TARGET_SAME is not set +# CONFIG_IP_NF_NAT_SNMP_BASIC is not set +CONFIG_IP_NF_NAT_IRC=m +CONFIG_IP_NF_NAT_FTP=y +CONFIG_IP_NF_NAT_TFTP=m +CONFIG_IP_NF_NAT_AMANDA=m +CONFIG_IP_NF_MANGLE=y +CONFIG_IP_NF_TARGET_TOS=m +CONFIG_IP_NF_TARGET_ECN=m +CONFIG_IP_NF_TARGET_DSCP=m +CONFIG_IP_NF_TARGET_MARK=y +# CONFIG_IP_NF_TARGET_CLASSIFY is not set +# CONFIG_IP_NF_RAW is not set +CONFIG_IP_NF_ARPTABLES=m +CONFIG_IP_NF_ARPFILTER=m +CONFIG_IP_NF_ARP_MANGLE=m +CONFIG_IP_NF_SET=m +CONFIG_IP_NF_SET_MAX=256 +CONFIG_IP_NF_SET_HASHSIZE=1024 +CONFIG_IP_NF_SET_IPMAP=m +CONFIG_IP_NF_SET_MACIPMAP=m +CONFIG_IP_NF_SET_PORTMAP=m +CONFIG_IP_NF_SET_IPHASH=m +CONFIG_IP_NF_SET_NETHASH=m +CONFIG_IP_NF_SET_IPTREE=m +CONFIG_IP_NF_MATCH_SET=m +CONFIG_IP_NF_TARGET_SET=m + +# +# IPv6: Netfilter Configuration (EXPERIMENTAL) +# +CONFIG_IP6_NF_QUEUE=m +CONFIG_IP6_NF_IPTABLES=m +CONFIG_IP6_NF_MATCH_LIMIT=m +CONFIG_IP6_NF_MATCH_MAC=m +# CONFIG_IP6_NF_MATCH_RT is not set +# CONFIG_IP6_NF_MATCH_OPTS is not set +# CONFIG_IP6_NF_MATCH_FRAG is not set +# CONFIG_IP6_NF_MATCH_HL is not set +CONFIG_IP6_NF_MATCH_MULTIPORT=m +CONFIG_IP6_NF_MATCH_OWNER=m +CONFIG_IP6_NF_MATCH_MARK=m +# CONFIG_IP6_NF_MATCH_IPV6HEADER is not set +# CONFIG_IP6_NF_MATCH_AHESP is not set +CONFIG_IP6_NF_MATCH_LENGTH=m +CONFIG_IP6_NF_MATCH_EUI64=m +CONFIG_IP6_NF_FILTER=m +CONFIG_IP6_NF_TARGET_LOG=m +CONFIG_IP6_NF_MANGLE=m +CONFIG_IP6_NF_TARGET_MARK=m +# CONFIG_IP6_NF_RAW is not set + +# +# Bridge: Netfilter Configuration +# +CONFIG_BRIDGE_NF_EBTABLES=m +CONFIG_BRIDGE_EBT_BROUTE=m +CONFIG_BRIDGE_EBT_T_FILTER=m +CONFIG_BRIDGE_EBT_T_NAT=m +CONFIG_BRIDGE_EBT_802_3=m +CONFIG_BRIDGE_EBT_AMONG=m +CONFIG_BRIDGE_EBT_ARP=m +CONFIG_BRIDGE_EBT_IP=m +CONFIG_BRIDGE_EBT_LIMIT=m +CONFIG_BRIDGE_EBT_MARK=m +CONFIG_BRIDGE_EBT_PKTTYPE=m +CONFIG_BRIDGE_EBT_STP=m +CONFIG_BRIDGE_EBT_VLAN=m +CONFIG_BRIDGE_EBT_ARPREPLY=m +CONFIG_BRIDGE_EBT_DNAT=m +CONFIG_BRIDGE_EBT_MARK_T=m +CONFIG_BRIDGE_EBT_REDIRECT=m +CONFIG_BRIDGE_EBT_SNAT=m +CONFIG_BRIDGE_EBT_LOG=m +CONFIG_BRIDGE_EBT_ULOG=m +CONFIG_XFRM=y +# CONFIG_XFRM_USER is not set + +# +# SCTP Configuration (EXPERIMENTAL) +# +# CONFIG_IP_SCTP is not set +# CONFIG_ATM is not set +CONFIG_BRIDGE=y +CONFIG_VLAN_8021Q=y +# CONFIG_DECNET is not set +# CONFIG_LLC2 is not set +# CONFIG_IPX is not set +# CONFIG_ATALK is not set +# CONFIG_X25 is not set +# CONFIG_LAPB is not set +# CONFIG_NET_DIVERT is not set +# CONFIG_ECONET is not set +# CONFIG_WAN_ROUTER is not set + +# +# QoS and/or fair queueing +# +CONFIG_NET_SCHED=y +CONFIG_NET_SCH_CLK_JIFFIES=y +# CONFIG_NET_SCH_CLK_GETTIMEOFDAY is not set +# CONFIG_NET_SCH_CLK_CPU is not set +CONFIG_NET_SCH_CBQ=m +CONFIG_NET_SCH_HTB=m +CONFIG_NET_SCH_HFSC=m +CONFIG_NET_SCH_PRIO=m +CONFIG_NET_SCH_RED=m +CONFIG_NET_SCH_SFQ=m +CONFIG_NET_SCH_TEQL=m +CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_GRED=m +CONFIG_NET_SCH_DSMARK=m +# CONFIG_NET_SCH_NETEM is not set +CONFIG_NET_SCH_INGRESS=m +CONFIG_NET_QOS=y +CONFIG_NET_ESTIMATOR=y +CONFIG_NET_CLS=y +CONFIG_NET_CLS_BASIC=m +CONFIG_NET_CLS_TCINDEX=m +CONFIG_NET_CLS_ROUTE4=m +CONFIG_NET_CLS_ROUTE=y +CONFIG_NET_CLS_FW=m +CONFIG_NET_CLS_U32=m +# CONFIG_CLS_U32_PERF is not set +# CONFIG_NET_CLS_IND is not set +# CONFIG_CLS_U32_MARK is not set +CONFIG_NET_CLS_RSVP=m +CONFIG_NET_CLS_RSVP6=m +# CONFIG_NET_EMATCH is not set +# CONFIG_NET_CLS_ACT is not set +CONFIG_NET_CLS_POLICE=y + +# +# Network testing +# +# CONFIG_NET_PKTGEN is not set +# CONFIG_NETPOLL is not set +# CONFIG_NET_POLL_CONTROLLER is not set +CONFIG_HAMRADIO=y + +# +# Packet Radio protocols +# +CONFIG_AX25=m +# CONFIG_AX25_DAMA_SLAVE is not set +# CONFIG_NETROM is not set +# CONFIG_ROSE is not set + +# +# AX.25 network device drivers +# +CONFIG_MKISS=m +# CONFIG_6PACK is not set +# CONFIG_BPQETHER is not set +# CONFIG_DMASCC is not set +# CONFIG_SCC is not set +# CONFIG_BAYCOM_SER_FDX is not set +# CONFIG_BAYCOM_SER_HDX is not set +# CONFIG_YAM is not set +# CONFIG_IRDA is not set +CONFIG_BT=m +CONFIG_BT_L2CAP=m +CONFIG_BT_SCO=m +CONFIG_BT_RFCOMM=m +CONFIG_BT_RFCOMM_TTY=y +CONFIG_BT_BNEP=m +CONFIG_BT_BNEP_MC_FILTER=y +CONFIG_BT_BNEP_PROTO_FILTER=y +CONFIG_BT_HIDP=m + +# +# Bluetooth device drivers +# +# CONFIG_BT_HCIUSB is not set +CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_BCSP=y +CONFIG_BT_HCIUART_BCSP_TXCRC=y +# CONFIG_BT_HCIBCM203X is not set +# CONFIG_BT_HCIBPA10X is not set +# CONFIG_BT_HCIBFUSB is not set +# CONFIG_BT_HCIDTL1 is not set +# CONFIG_BT_HCIBT3C is not set +# CONFIG_BT_HCIBLUECARD is not set +# CONFIG_BT_HCIBTUART is not set +# CONFIG_BT_HCIVHCI is not set +CONFIG_NETDEVICES=y +# CONFIG_DUMMY is not set +# CONFIG_BONDING is not set +# CONFIG_EQUALIZER is not set +CONFIG_TUN=m +# CONFIG_NET_SB1000 is not set + +# +# ARCnet devices +# +# CONFIG_ARCNET is not set + +# +# Ethernet (10 or 100Mbit) +# +CONFIG_NET_ETHERNET=y +CONFIG_MII=y +# CONFIG_HAPPYMEAL is not set +# CONFIG_SUNGEM is not set +CONFIG_NET_VENDOR_3COM=y +# CONFIG_EL1 is not set +# CONFIG_EL2 is not set +# CONFIG_ELPLUS is not set +# CONFIG_EL16 is not set +# CONFIG_EL3 is not set +# CONFIG_3C515 is not set +CONFIG_VORTEX=m +# CONFIG_TYPHOON is not set +# CONFIG_LANCE is not set +# CONFIG_NET_VENDOR_SMC is not set +# CONFIG_NET_VENDOR_RACAL is not set + +# +# Tulip family network device support +# +# CONFIG_NET_TULIP is not set +# CONFIG_AT1700 is not set +# CONFIG_DEPCA is not set +# CONFIG_HP100 is not set +# CONFIG_NET_ISA is not set +CONFIG_NET_PCI=y +# CONFIG_PCNET32 is not set +# CONFIG_AMD8111_ETH is not set +# CONFIG_ADAPTEC_STARFIRE is not set +# CONFIG_AC3200 is not set +# CONFIG_APRICOT is not set +# CONFIG_B44 is not set +# CONFIG_FORCEDETH is not set +# CONFIG_CS89x0 is not set +# CONFIG_DGRS is not set +# CONFIG_EEPRO100 is not set +CONFIG_E100=m +# CONFIG_FEALNX is not set +CONFIG_NATSEMI=m +# CONFIG_NE2K_PCI is not set +# CONFIG_8139CP is not set +CONFIG_8139TOO=m +CONFIG_8139TOO_PIO=y +# CONFIG_8139TOO_TUNE_TWISTER is not set +# CONFIG_8139TOO_8129 is not set +# CONFIG_8139_OLD_RX_RESET is not set +# CONFIG_SIS900 is not set +# CONFIG_EPIC100 is not set +# CONFIG_SUNDANCE is not set +# CONFIG_TLAN is not set +# CONFIG_VIA_RHINE is not set +# CONFIG_NET_POCKET is not set + +# +# Ethernet (1000 Mbit) +# +# CONFIG_ACENIC is not set +# CONFIG_DL2K is not set +# CONFIG_E1000 is not set +# CONFIG_NS83820 is not set +# CONFIG_HAMACHI is not set +# CONFIG_YELLOWFIN is not set +# CONFIG_R8169 is not set +# CONFIG_SK98LIN is not set +# CONFIG_VIA_VELOCITY is not set +# CONFIG_TIGON3 is not set +# CONFIG_BNX2 is not set + +# +# Ethernet (10000 Mbit) +# +# CONFIG_IXGB is not set +# CONFIG_S2IO is not set + +# +# Token Ring devices +# +# CONFIG_TR is not set + +# +# Wireless LAN (non-hamradio) +# +CONFIG_NET_RADIO=y + +# +# Obsolete Wireless cards support (pre-802.11) +# +# CONFIG_STRIP is not set +# CONFIG_ARLAN is not set +# CONFIG_WAVELAN is not set +# CONFIG_PCMCIA_WAVELAN is not set +# CONFIG_PCMCIA_NETWAVE is not set + +# +# Wireless 802.11 Frequency Hopping cards support +# +# CONFIG_PCMCIA_RAYCS is not set + +# +# Wireless 802.11b ISA/PCI cards support +# +CONFIG_AIRO=m +CONFIG_HERMES=m +CONFIG_PLX_HERMES=m +CONFIG_TMD_HERMES=m +CONFIG_PCI_HERMES=m +CONFIG_ATMEL=m +CONFIG_PCI_ATMEL=m + +# +# Wireless 802.11b Pcmcia/Cardbus cards support +# +# CONFIG_PCMCIA_HERMES is not set +CONFIG_AIRO_CS=m +CONFIG_PCMCIA_ATMEL=m +# CONFIG_PCMCIA_WL3501 is not set + +# +# Prism GT/Duette 802.11(a/b/g) PCI/Cardbus support +# +CONFIG_PRISM54=m +CONFIG_NET_WIRELESS=y + +# +# PCMCIA network device support +# +# CONFIG_NET_PCMCIA is not set + +# +# Wan interfaces +# +# CONFIG_WAN is not set +# CONFIG_FDDI is not set +# CONFIG_HIPPI is not set +CONFIG_PPP=m +# CONFIG_PPP_MULTILINK is not set +# CONFIG_PPP_FILTER is not set +CONFIG_PPP_ASYNC=m +# CONFIG_PPP_SYNC_TTY is not set +CONFIG_PPP_DEFLATE=m +CONFIG_PPP_BSDCOMP=m +CONFIG_PPP_MPPE_MPPC=m +CONFIG_PPPOE=m +# CONFIG_SLIP is not set +# CONFIG_NET_FC is not set +# CONFIG_SHAPER is not set +# CONFIG_NETCONSOLE is not set + +# +# ISDN subsystem +# +# CONFIG_ISDN is not set + +# +# Telephony Support +# +# CONFIG_PHONE is not set + +# +# Input device support +# +CONFIG_INPUT=m + +# +# Userland interfaces +# +CONFIG_INPUT_MOUSEDEV=m +CONFIG_INPUT_MOUSEDEV_PSAUX=y +CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 +CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 +# CONFIG_INPUT_JOYDEV is not set +# CONFIG_INPUT_TSDEV is not set +# CONFIG_INPUT_EVDEV is not set +# CONFIG_INPUT_EVBUG is not set + +# +# Input Device Drivers +# +CONFIG_INPUT_KEYBOARD=y +CONFIG_KEYBOARD_ATKBD=m +# CONFIG_KEYBOARD_SUNKBD is not set +# CONFIG_KEYBOARD_LKKBD is not set +# CONFIG_KEYBOARD_XTKBD is not set +# CONFIG_KEYBOARD_NEWTON is not set +# CONFIG_INPUT_MOUSE is not set +# CONFIG_INPUT_JOYSTICK is not set +# CONFIG_INPUT_TOUCHSCREEN is not set +# CONFIG_INPUT_MISC is not set + +# +# Hardware I/O ports +# +CONFIG_SERIO=y +# CONFIG_SERIO_I8042 is not set +CONFIG_SERIO_SERPORT=y +# CONFIG_SERIO_CT82C710 is not set +# CONFIG_SERIO_PCIPS2 is not set +CONFIG_SERIO_LIBPS2=m +# CONFIG_SERIO_RAW is not set +# CONFIG_GAMEPORT is not set + +# +# Character devices +# +# CONFIG_VT is not set +# CONFIG_SERIAL_NONSTANDARD is not set + +# +# Serial drivers +# +CONFIG_SERIAL_8250=y +CONFIG_SERIAL_8250_CONSOLE=y +# CONFIG_SERIAL_8250_CS is not set +CONFIG_SERIAL_8250_NR_UARTS=2 +# CONFIG_SERIAL_8250_EXTENDED is not set + +# +# Non-8250 serial port support +# +CONFIG_SERIAL_CORE=y +CONFIG_SERIAL_CORE_CONSOLE=y +# CONFIG_SERIAL_JSM is not set +CONFIG_UNIX98_PTYS=y +# CONFIG_LEGACY_PTYS is not set + +# +# IPMI +# +# CONFIG_IPMI_HANDLER is not set + +# +# Watchdog Cards +# +CONFIG_WATCHDOG=y +CONFIG_WATCHDOG_NOWAYOUT=y + +# +# Watchdog Device Drivers +# +CONFIG_SOFT_WATCHDOG=m +# CONFIG_ACQUIRE_WDT is not set +# CONFIG_ADVANTECH_WDT is not set +# CONFIG_ALIM1535_WDT is not set +# CONFIG_ALIM7101_WDT is not set +# CONFIG_SC520_WDT is not set +# CONFIG_EUROTECH_WDT is not set +# CONFIG_IB700_WDT is not set +# CONFIG_WAFER_WDT is not set +# CONFIG_I8XX_TCO is not set +CONFIG_SC1200_WDT=m +CONFIG_SCx200_WDT=m +# CONFIG_60XX_WDT is not set +# CONFIG_CPU5_WDT is not set +# CONFIG_W83627HF_WDT is not set +# CONFIG_W83877F_WDT is not set +# CONFIG_MACHZ_WDT is not set + +# +# ISA-based Watchdog Cards +# +# CONFIG_PCWATCHDOG is not set +# CONFIG_MIXCOMWD is not set +# CONFIG_WDT is not set + +# +# PCI-based Watchdog Cards +# +# CONFIG_PCIPCWATCHDOG is not set +# CONFIG_WDTPCI is not set + +# +# USB-based Watchdog Cards +# +# CONFIG_USBPCWATCHDOG is not set +# CONFIG_HW_RANDOM is not set +CONFIG_NVRAM=y +CONFIG_RTC=y +# CONFIG_DTLK is not set +# CONFIG_R3964 is not set +# CONFIG_APPLICOM is not set +# CONFIG_SONYPI is not set + +# +# Ftape, the floppy tape device driver +# +# CONFIG_FTAPE is not set +# CONFIG_AGP is not set +# CONFIG_DRM is not set + +# +# PCMCIA character devices +# +# CONFIG_SYNCLINK_CS is not set +# CONFIG_MWAVE is not set +CONFIG_SCx200_GPIO=m +# CONFIG_RAW_DRIVER is not set +# CONFIG_HANGCHECK_TIMER is not set + +# +# TPM devices +# +# CONFIG_TCG_TPM is not set + +# +# I2C support +# +CONFIG_I2C=m +CONFIG_I2C_CHARDEV=m + +# +# I2C Algorithms +# +CONFIG_I2C_ALGOBIT=m +# CONFIG_I2C_ALGOPCF is not set +# CONFIG_I2C_ALGOPCA is not set + +# +# I2C Hardware Bus support +# +# CONFIG_I2C_ALI1535 is not set +# CONFIG_I2C_ALI1563 is not set +# CONFIG_I2C_ALI15X3 is not set +# CONFIG_I2C_AMD756 is not set +# CONFIG_I2C_AMD8111 is not set +# CONFIG_I2C_ELEKTOR is not set +# CONFIG_I2C_I801 is not set +# CONFIG_I2C_I810 is not set +# CONFIG_I2C_PIIX4 is not set +CONFIG_I2C_ISA=m +# CONFIG_I2C_NFORCE2 is not set +# CONFIG_I2C_PARPORT_LIGHT is not set +# CONFIG_I2C_PROSAVAGE is not set +# CONFIG_I2C_SAVAGE4 is not set +CONFIG_SCx200_I2C=m +CONFIG_SCx200_I2C_SCL=12 +CONFIG_SCx200_I2C_SDA=13 +CONFIG_SCx200_ACB=m +# CONFIG_I2C_SIS5595 is not set +# CONFIG_I2C_SIS630 is not set +# CONFIG_I2C_SIS96X is not set +# CONFIG_I2C_STUB is not set +# CONFIG_I2C_VIA is not set +# CONFIG_I2C_VIAPRO is not set +# CONFIG_I2C_VOODOO3 is not set +# CONFIG_I2C_PCA_ISA is not set + +# +# Hardware Sensors Chip support +# +CONFIG_I2C_SENSOR=m +# CONFIG_SENSORS_ADM1021 is not set +# CONFIG_SENSORS_ADM1025 is not set +# CONFIG_SENSORS_ADM1026 is not set +# CONFIG_SENSORS_ADM1031 is not set +# CONFIG_SENSORS_ASB100 is not set +# CONFIG_SENSORS_DS1621 is not set +# CONFIG_SENSORS_FSCHER is not set +# CONFIG_SENSORS_FSCPOS is not set +# CONFIG_SENSORS_GL518SM is not set +# CONFIG_SENSORS_GL520SM is not set +# CONFIG_SENSORS_IT87 is not set +# CONFIG_SENSORS_LM63 is not set +# CONFIG_SENSORS_LM75 is not set +# CONFIG_SENSORS_LM77 is not set +# CONFIG_SENSORS_LM78 is not set +# CONFIG_SENSORS_LM80 is not set +# CONFIG_SENSORS_LM83 is not set +# CONFIG_SENSORS_LM85 is not set +# CONFIG_SENSORS_LM87 is not set +# CONFIG_SENSORS_LM90 is not set +# CONFIG_SENSORS_LM92 is not set +# CONFIG_SENSORS_MAX1619 is not set +CONFIG_SENSORS_PC87360=m +# CONFIG_SENSORS_SMSC47B397 is not set +# CONFIG_SENSORS_SIS5595 is not set +# CONFIG_SENSORS_SMSC47M1 is not set +# CONFIG_SENSORS_VIA686A is not set +# CONFIG_SENSORS_W83781D is not set +# CONFIG_SENSORS_W83L785TS is not set +# CONFIG_SENSORS_W83627HF is not set + +# +# Other I2C Chip support +# +# CONFIG_SENSORS_DS1337 is not set +# CONFIG_SENSORS_EEPROM is not set +# CONFIG_SENSORS_PCF8574 is not set +# CONFIG_SENSORS_PCF8591 is not set +# CONFIG_SENSORS_RTC8564 is not set +# CONFIG_I2C_DEBUG_CORE is not set +# CONFIG_I2C_DEBUG_ALGO is not set +# CONFIG_I2C_DEBUG_BUS is not set +# CONFIG_I2C_DEBUG_CHIP is not set + +# +# Dallas's 1-wire bus +# +# CONFIG_W1 is not set + +# +# Misc devices +# +# CONFIG_IBM_ASM is not set + +# +# Multimedia devices +# +CONFIG_VIDEO_DEV=m + +# +# Video For Linux +# + +# +# Video Adapters +# +# CONFIG_VIDEO_BT848 is not set +# CONFIG_VIDEO_PMS is not set +# CONFIG_VIDEO_CPIA is not set +# CONFIG_VIDEO_SAA5246A is not set +# CONFIG_VIDEO_SAA5249 is not set +# CONFIG_TUNER_3036 is not set +# CONFIG_VIDEO_STRADIS is not set +# CONFIG_VIDEO_ZORAN is not set +# CONFIG_VIDEO_SAA7134 is not set +# CONFIG_VIDEO_MXB is not set +# CONFIG_VIDEO_DPC is not set +# CONFIG_VIDEO_HEXIUM_ORION is not set +# CONFIG_VIDEO_HEXIUM_GEMINI is not set +# CONFIG_VIDEO_CX88 is not set +# CONFIG_VIDEO_OVCAMCHIP is not set + +# +# Radio Adapters +# +# CONFIG_RADIO_CADET is not set +# CONFIG_RADIO_RTRACK is not set +# CONFIG_RADIO_RTRACK2 is not set +# CONFIG_RADIO_AZTECH is not set +# CONFIG_RADIO_GEMTEK is not set +# CONFIG_RADIO_GEMTEK_PCI is not set +# CONFIG_RADIO_MAXIRADIO is not set +# CONFIG_RADIO_MAESTRO is not set +# CONFIG_RADIO_SF16FMI is not set +# CONFIG_RADIO_SF16FMR2 is not set +# CONFIG_RADIO_TERRATEC is not set +# CONFIG_RADIO_TRUST is not set +# CONFIG_RADIO_TYPHOON is not set +# CONFIG_RADIO_ZOLTRIX is not set + +# +# Digital Video Broadcasting Devices +# +# CONFIG_DVB is not set + +# +# Graphics support +# +# CONFIG_FB is not set + +# +# Sound +# +CONFIG_SOUND=m + +# +# Advanced Linux Sound Architecture +# +CONFIG_SND=m +CONFIG_SND_TIMER=m +CONFIG_SND_PCM=m +CONFIG_SND_RAWMIDI=m +# CONFIG_SND_SEQUENCER is not set +# CONFIG_SND_MIXER_OSS is not set +# CONFIG_SND_PCM_OSS is not set +# CONFIG_SND_RTCTIMER is not set +# CONFIG_SND_VERBOSE_PRINTK is not set +# CONFIG_SND_DEBUG is not set + +# +# Generic devices +# +# CONFIG_SND_DUMMY is not set +# CONFIG_SND_MTPAV is not set +# CONFIG_SND_SERIAL_U16550 is not set +# CONFIG_SND_MPU401 is not set + +# +# ISA devices +# +# CONFIG_SND_AD1816A is not set +# CONFIG_SND_AD1848 is not set +# CONFIG_SND_CS4231 is not set +# CONFIG_SND_CS4232 is not set +# CONFIG_SND_CS4236 is not set +# CONFIG_SND_ES968 is not set +# CONFIG_SND_ES1688 is not set +# CONFIG_SND_ES18XX is not set +# CONFIG_SND_GUSCLASSIC is not set +# CONFIG_SND_GUSEXTREME is not set +# CONFIG_SND_GUSMAX is not set +# CONFIG_SND_INTERWAVE is not set +# CONFIG_SND_INTERWAVE_STB is not set +# CONFIG_SND_OPTI92X_AD1848 is not set +# CONFIG_SND_OPTI92X_CS4231 is not set +# CONFIG_SND_OPTI93X is not set +# CONFIG_SND_SB8 is not set +# CONFIG_SND_SB16 is not set +# CONFIG_SND_SBAWE is not set +# CONFIG_SND_WAVEFRONT is not set +# CONFIG_SND_ALS100 is not set +# CONFIG_SND_AZT2320 is not set +# CONFIG_SND_CMI8330 is not set +# CONFIG_SND_DT019X is not set +# CONFIG_SND_OPL3SA2 is not set +# CONFIG_SND_SGALAXY is not set +# CONFIG_SND_SSCAPE is not set + +# +# PCI devices +# +# CONFIG_SND_ALI5451 is not set +# CONFIG_SND_ATIIXP is not set +# CONFIG_SND_ATIIXP_MODEM is not set +# CONFIG_SND_AU8810 is not set +# CONFIG_SND_AU8820 is not set +# CONFIG_SND_AU8830 is not set +# CONFIG_SND_AZT3328 is not set +# CONFIG_SND_BT87X is not set +# CONFIG_SND_CS46XX is not set +# CONFIG_SND_CS4281 is not set +# CONFIG_SND_EMU10K1 is not set +# CONFIG_SND_EMU10K1X is not set +# CONFIG_SND_CA0106 is not set +# CONFIG_SND_KORG1212 is not set +# CONFIG_SND_MIXART is not set +# CONFIG_SND_NM256 is not set +# CONFIG_SND_RME32 is not set +# CONFIG_SND_RME96 is not set +# CONFIG_SND_RME9652 is not set +# CONFIG_SND_HDSP is not set +# CONFIG_SND_TRIDENT is not set +# CONFIG_SND_YMFPCI is not set +# CONFIG_SND_ALS4000 is not set +# CONFIG_SND_CMIPCI is not set +# CONFIG_SND_ENS1370 is not set +# CONFIG_SND_ENS1371 is not set +# CONFIG_SND_ES1938 is not set +# CONFIG_SND_ES1968 is not set +# CONFIG_SND_MAESTRO3 is not set +# CONFIG_SND_FM801 is not set +# CONFIG_SND_ICE1712 is not set +# CONFIG_SND_ICE1724 is not set +# CONFIG_SND_INTEL8X0 is not set +# CONFIG_SND_INTEL8X0M is not set +# CONFIG_SND_SONICVIBES is not set +# CONFIG_SND_VIA82XX is not set +# CONFIG_SND_VIA82XX_MODEM is not set +# CONFIG_SND_VX222 is not set +# CONFIG_SND_HDA_INTEL is not set + +# +# USB devices +# +CONFIG_SND_USB_AUDIO=m +# CONFIG_SND_USB_USX2Y is not set + +# +# PCMCIA devices +# +# CONFIG_SND_VXPOCKET is not set +# CONFIG_SND_VXP440 is not set +# CONFIG_SND_PDAUDIOCF is not set + +# +# Open Sound System +# +# CONFIG_SOUND_PRIME is not set + +# +# USB support +# +CONFIG_USB_ARCH_HAS_HCD=y +CONFIG_USB_ARCH_HAS_OHCI=y +CONFIG_USB=m +CONFIG_USB_DEBUG=y + +# +# Miscellaneous USB options +# +CONFIG_USB_DEVICEFS=y +# CONFIG_USB_BANDWIDTH is not set +# CONFIG_USB_DYNAMIC_MINORS is not set +# CONFIG_USB_OTG is not set + +# +# USB Host Controller Drivers +# +CONFIG_USB_EHCI_HCD=m +# CONFIG_USB_EHCI_SPLIT_ISO is not set +# CONFIG_USB_EHCI_ROOT_HUB_TT is not set +CONFIG_USB_OHCI_HCD=m +# CONFIG_USB_OHCI_BIG_ENDIAN is not set +CONFIG_USB_OHCI_LITTLE_ENDIAN=y +# CONFIG_USB_UHCI_HCD is not set +# CONFIG_USB_SL811_HCD is not set + +# +# USB Device Class drivers +# +# CONFIG_USB_AUDIO is not set + +# +# USB Bluetooth TTY can only be used with disabled Bluetooth subsystem +# +# CONFIG_USB_MIDI is not set +CONFIG_USB_ACM=m +CONFIG_USB_PRINTER=m + +# +# NOTE: USB_STORAGE enables SCSI, and 'SCSI disk support' may also be needed; see USB_STORAGE Help for more information +# +CONFIG_USB_STORAGE=m +CONFIG_USB_STORAGE_DEBUG=y +# CONFIG_USB_STORAGE_DATAFAB is not set +# CONFIG_USB_STORAGE_FREECOM is not set +# CONFIG_USB_STORAGE_ISD200 is not set +# CONFIG_USB_STORAGE_DPCM is not set +# CONFIG_USB_STORAGE_USBAT is not set +# CONFIG_USB_STORAGE_SDDR09 is not set +# CONFIG_USB_STORAGE_SDDR55 is not set +# CONFIG_USB_STORAGE_JUMPSHOT is not set + +# +# USB Input Devices +# +# CONFIG_USB_HID is not set + +# +# USB HID Boot Protocol drivers +# +# CONFIG_USB_KBD is not set +# CONFIG_USB_MOUSE is not set +# CONFIG_USB_AIPTEK is not set +# CONFIG_USB_WACOM is not set +# CONFIG_USB_KBTAB is not set +# CONFIG_USB_POWERMATE is not set +# CONFIG_USB_MTOUCH is not set +# CONFIG_USB_EGALAX is not set +# CONFIG_USB_XPAD is not set +# CONFIG_USB_ATI_REMOTE is not set + +# +# USB Imaging devices +# +# CONFIG_USB_MDC800 is not set +# CONFIG_USB_MICROTEK is not set + +# +# USB Multimedia devices +# +# CONFIG_USB_DABUSB is not set +# CONFIG_USB_VICAM is not set +# CONFIG_USB_DSBR is not set +# CONFIG_USB_IBMCAM is not set +# CONFIG_USB_KONICAWC is not set +# CONFIG_USB_OV511 is not set +# CONFIG_USB_SE401 is not set +# CONFIG_USB_SN9C102 is not set +# CONFIG_USB_STV680 is not set +# CONFIG_USB_PWC is not set + +# +# USB Network Adapters +# +# CONFIG_USB_CATC is not set +# CONFIG_USB_KAWETH is not set +# CONFIG_USB_PEGASUS is not set +# CONFIG_USB_RTL8150 is not set +# CONFIG_USB_USBNET is not set +# CONFIG_USB_ZD1201 is not set +# CONFIG_USB_MON is not set + +# +# USB port drivers +# + +# +# USB Serial Converter support +# +CONFIG_USB_SERIAL=m +# CONFIG_USB_SERIAL_GENERIC is not set +# CONFIG_USB_SERIAL_AIRPRIME is not set +CONFIG_USB_SERIAL_BELKIN=m +# CONFIG_USB_SERIAL_WHITEHEAT is not set +# CONFIG_USB_SERIAL_DIGI_ACCELEPORT is not set +# CONFIG_USB_SERIAL_CP2101 is not set +# CONFIG_USB_SERIAL_CYPRESS_M8 is not set +# CONFIG_USB_SERIAL_EMPEG is not set +CONFIG_USB_SERIAL_FTDI_SIO=m +# CONFIG_USB_SERIAL_VISOR is not set +# CONFIG_USB_SERIAL_IPAQ is not set +# CONFIG_USB_SERIAL_IR is not set +# CONFIG_USB_SERIAL_EDGEPORT is not set +# CONFIG_USB_SERIAL_EDGEPORT_TI is not set +# CONFIG_USB_SERIAL_GARMIN is not set +# CONFIG_USB_SERIAL_IPW is not set +# CONFIG_USB_SERIAL_KEYSPAN_PDA is not set +# CONFIG_USB_SERIAL_KEYSPAN is not set +# CONFIG_USB_SERIAL_KLSI is not set +# CONFIG_USB_SERIAL_KOBIL_SCT is not set +CONFIG_USB_SERIAL_MCT_U232=m +CONFIG_USB_SERIAL_PL2303=m +# CONFIG_USB_SERIAL_HP4X is not set +# CONFIG_USB_SERIAL_SAFE is not set +# CONFIG_USB_SERIAL_TI is not set +# CONFIG_USB_SERIAL_CYBERJACK is not set +# CONFIG_USB_SERIAL_XIRCOM is not set +# CONFIG_USB_SERIAL_OPTION is not set +# CONFIG_USB_SERIAL_OMNINET is not set + +# +# USB Miscellaneous drivers +# +# CONFIG_USB_EMI62 is not set +# CONFIG_USB_EMI26 is not set +# CONFIG_USB_AUERSWALD is not set +# CONFIG_USB_RIO500 is not set +# CONFIG_USB_LEGOTOWER is not set +# CONFIG_USB_LCD is not set +# CONFIG_USB_LED is not set +# CONFIG_USB_CYTHERM is not set +# CONFIG_USB_PHIDGETKIT is not set +# CONFIG_USB_PHIDGETSERVO is not set +# CONFIG_USB_IDMOUSE is not set +# CONFIG_USB_SISUSBVGA is not set +# CONFIG_USB_TEST is not set + +# +# USB ATM/DSL drivers +# + +# +# USB Gadget Support +# +# CONFIG_USB_GADGET is not set + +# +# MMC/SD Card support +# +# CONFIG_MMC is not set + +# +# InfiniBand support +# +# CONFIG_INFINIBAND is not set + +# +# File systems +# +CONFIG_EXT2_FS=m +# CONFIG_EXT2_FS_XATTR is not set +CONFIG_EXT3_FS=m +# CONFIG_EXT3_FS_XATTR is not set +CONFIG_JBD=m +# CONFIG_JBD_DEBUG is not set +CONFIG_REISERFS_FS=m +# CONFIG_REISERFS_CHECK is not set +# CONFIG_REISERFS_PROC_INFO is not set +# CONFIG_REISERFS_FS_XATTR is not set +CONFIG_JFS_FS=m +# CONFIG_JFS_POSIX_ACL is not set +# CONFIG_JFS_SECURITY is not set +# CONFIG_JFS_DEBUG is not set +# CONFIG_JFS_STATISTICS is not set + +# +# XFS support +# +CONFIG_XFS_FS=m +# CONFIG_XFS_RT is not set +# CONFIG_XFS_QUOTA is not set +# CONFIG_XFS_SECURITY is not set +# CONFIG_XFS_POSIX_ACL is not set +# CONFIG_MINIX_FS is not set +# CONFIG_ROMFS_FS is not set +# CONFIG_QUOTA is not set +CONFIG_DNOTIFY=y +# CONFIG_AUTOFS_FS is not set +# CONFIG_AUTOFS4_FS is not set + +# +# CD-ROM/DVD Filesystems +# +# CONFIG_ISO9660_FS is not set +# CONFIG_UDF_FS is not set + +# +# DOS/FAT/NT Filesystems +# +CONFIG_FAT_FS=m +CONFIG_MSDOS_FS=m +CONFIG_VFAT_FS=m +CONFIG_FAT_DEFAULT_CODEPAGE=437 +CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +# CONFIG_NTFS_FS is not set + +# +# Pseudo filesystems +# +CONFIG_PROC_FS=y +# CONFIG_PROC_KCORE is not set +CONFIG_SYSFS=y +CONFIG_DEVFS_FS=y +CONFIG_DEVFS_MOUNT=y +# CONFIG_DEVFS_DEBUG is not set +# CONFIG_DEVPTS_FS_XATTR is not set +CONFIG_TMPFS=y +# CONFIG_TMPFS_XATTR is not set +# CONFIG_HUGETLBFS is not set +# CONFIG_HUGETLB_PAGE is not set +CONFIG_RAMFS=y + +# +# Miscellaneous filesystems +# +# CONFIG_ADFS_FS is not set +# CONFIG_AFFS_FS is not set +# CONFIG_HFS_FS is not set +# CONFIG_HFSPLUS_FS is not set +# CONFIG_BEFS_FS is not set +# CONFIG_BFS_FS is not set +# CONFIG_EFS_FS is not set +# CONFIG_JFFS_FS is not set +CONFIG_JFFS2_FS=y +CONFIG_JFFS2_FS_DEBUG=0 +# CONFIG_JFFS2_FS_NAND is not set +# CONFIG_JFFS2_FS_NOR_ECC is not set +CONFIG_JFFS2_COMPRESSION_OPTIONS=y +CONFIG_JFFS2_ZLIB=y +CONFIG_JFFS2_RTIME=y +# CONFIG_JFFS2_RUBIN is not set +# CONFIG_JFFS2_CMODE_NONE is not set +CONFIG_JFFS2_CMODE_PRIORITY=y +# CONFIG_JFFS2_CMODE_SIZE is not set +# CONFIG_CRAMFS is not set +CONFIG_SQUASHFS=y +# CONFIG_SQUASHFS_EMBEDDED is not set +CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 +# CONFIG_SQUASHFS_VMALLOC is not set +# CONFIG_VXFS_FS is not set +# CONFIG_HPFS_FS is not set +# CONFIG_QNX4FS_FS is not set +# CONFIG_SYSV_FS is not set +# CONFIG_UFS_FS is not set + +# +# Network File Systems +# +# CONFIG_NFS_FS is not set +# CONFIG_NFSD is not set +# CONFIG_SMB_FS is not set +# CONFIG_CIFS is not set +# CONFIG_NCP_FS is not set +# CONFIG_CODA_FS is not set +# CONFIG_AFS_FS is not set + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +# CONFIG_OSF_PARTITION is not set +# CONFIG_AMIGA_PARTITION is not set +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +# CONFIG_BSD_DISKLABEL is not set +# CONFIG_MINIX_SUBPARTITION is not set +# CONFIG_SOLARIS_X86_PARTITION is not set +# CONFIG_UNIXWARE_DISKLABEL is not set +# CONFIG_LDM_PARTITION is not set +# CONFIG_SGI_PARTITION is not set +# CONFIG_ULTRIX_PARTITION is not set +# CONFIG_SUN_PARTITION is not set +# CONFIG_EFI_PARTITION is not set + +# +# Native Language Support +# +CONFIG_NLS=m +CONFIG_NLS_DEFAULT="iso8859-1" +CONFIG_NLS_CODEPAGE_437=m +# CONFIG_NLS_CODEPAGE_737 is not set +# CONFIG_NLS_CODEPAGE_775 is not set +CONFIG_NLS_CODEPAGE_850=m +# CONFIG_NLS_CODEPAGE_852 is not set +# CONFIG_NLS_CODEPAGE_855 is not set +# CONFIG_NLS_CODEPAGE_857 is not set +# CONFIG_NLS_CODEPAGE_860 is not set +# CONFIG_NLS_CODEPAGE_861 is not set +# CONFIG_NLS_CODEPAGE_862 is not set +# CONFIG_NLS_CODEPAGE_863 is not set +# CONFIG_NLS_CODEPAGE_864 is not set +# CONFIG_NLS_CODEPAGE_865 is not set +# CONFIG_NLS_CODEPAGE_866 is not set +# CONFIG_NLS_CODEPAGE_869 is not set +# CONFIG_NLS_CODEPAGE_936 is not set +# CONFIG_NLS_CODEPAGE_950 is not set +# CONFIG_NLS_CODEPAGE_932 is not set +# CONFIG_NLS_CODEPAGE_949 is not set +# CONFIG_NLS_CODEPAGE_874 is not set +# CONFIG_NLS_ISO8859_8 is not set +# CONFIG_NLS_CODEPAGE_1250 is not set +# CONFIG_NLS_CODEPAGE_1251 is not set +# CONFIG_NLS_ASCII is not set +CONFIG_NLS_ISO8859_1=m +# CONFIG_NLS_ISO8859_2 is not set +# CONFIG_NLS_ISO8859_3 is not set +# CONFIG_NLS_ISO8859_4 is not set +# CONFIG_NLS_ISO8859_5 is not set +# CONFIG_NLS_ISO8859_6 is not set +# CONFIG_NLS_ISO8859_7 is not set +# CONFIG_NLS_ISO8859_9 is not set +# CONFIG_NLS_ISO8859_13 is not set +# CONFIG_NLS_ISO8859_14 is not set +CONFIG_NLS_ISO8859_15=m +# CONFIG_NLS_KOI8_R is not set +# CONFIG_NLS_KOI8_U is not set +CONFIG_NLS_UTF8=m + +# +# Profiling support +# +# CONFIG_PROFILING is not set + +# +# Kernel hacking +# +# CONFIG_PRINTK_TIME is not set +# CONFIG_DEBUG_KERNEL is not set +CONFIG_LOG_BUF_SHIFT=14 +# CONFIG_DEBUG_BUGVERBOSE is not set +CONFIG_EARLY_PRINTK=y + +# +# Security options +# +# CONFIG_KEYS is not set +# CONFIG_SECURITY is not set + +# +# Cryptographic options +# +CONFIG_CRYPTO=y +CONFIG_CRYPTO_HMAC=y +# CONFIG_CRYPTO_NULL is not set +# CONFIG_CRYPTO_MD4 is not set +CONFIG_CRYPTO_MD5=m +CONFIG_CRYPTO_SHA1=m +# CONFIG_CRYPTO_SHA256 is not set +# CONFIG_CRYPTO_SHA512 is not set +# CONFIG_CRYPTO_WP512 is not set +# CONFIG_CRYPTO_TGR192 is not set +CONFIG_CRYPTO_DES=m +# CONFIG_CRYPTO_BLOWFISH is not set +# CONFIG_CRYPTO_TWOFISH is not set +# CONFIG_CRYPTO_SERPENT is not set +CONFIG_CRYPTO_AES_586=m +# CONFIG_CRYPTO_CAST5 is not set +# CONFIG_CRYPTO_CAST6 is not set +# CONFIG_CRYPTO_TEA is not set +CONFIG_CRYPTO_ARC4=m +# CONFIG_CRYPTO_KHAZAD is not set +# CONFIG_CRYPTO_ANUBIS is not set +CONFIG_CRYPTO_DEFLATE=m +CONFIG_CRYPTO_MICHAEL_MIC=m +# CONFIG_CRYPTO_CRC32C is not set +# CONFIG_CRYPTO_TEST is not set + +# +# Hardware crypto devices +# +# CONFIG_CRYPTO_DEV_PADLOCK is not set + +# +# Library routines +# +CONFIG_CRC_CCITT=m +CONFIG_CRC32=y +# CONFIG_LIBCRC32C is not set +CONFIG_ZLIB_INFLATE=y +CONFIG_ZLIB_DEFLATE=y +CONFIG_GENERIC_HARDIRQS=y +CONFIG_GENERIC_IRQ_PROBE=y +CONFIG_X86_BIOS_REBOOT=y diff --git a/openwrt/target/linux/linux-2.6/patches/x86/scx200-hr-timer-2.6.12-rc6-6.diff b/openwrt/target/linux/linux-2.6/patches/x86/scx200-hr-timer-2.6.12-rc6-6.diff new file mode 100644 index 000000000..38fc16a74 --- /dev/null +++ b/openwrt/target/linux/linux-2.6/patches/x86/scx200-hr-timer-2.6.12-rc6-6.diff @@ -0,0 +1,320 @@ +SCx200 High Resolution Timer Patch for Linux 2.6 +http://www.gnusto.com/scx200-hr-timer.html + +diff -Naurp linux-2.6.12-rc6.orig/arch/i386/Kconfig linux-2.6.12-rc6/arch/i386/Kconfig +--- linux-2.6.12-rc6.orig/arch/i386/Kconfig 2005-06-07 14:56:02.000000000 +0100 ++++ linux-2.6.12-rc6/arch/i386/Kconfig 2005-06-07 16:43:19.000000000 +0100 +@@ -458,6 +458,17 @@ config HPET_EMULATE_RTC + bool "Provide RTC interrupt" + depends on HPET_TIMER && RTC=y + ++config SCx200HR_TIMER ++ bool "NatSemi SCx200 27MHz High-Resolution Timer Support" ++ help ++ Some of the AMD (formerly National Semiconductor) Geode ++ processors, notably the SC1100, suffer from a buggy time ++ stamp counter which causes them to lose time when the ++ processor is sleeping. Enable this option to use the ++ on-board 27Mz high-resolution timer to keep time instead. ++ depends on (SCx200) ++ default n ++ + config SMP + bool "Symmetric multi-processing support" + ---help--- +diff -Naurp linux-2.6.12-rc6.orig/arch/i386/kernel/scx200.c linux-2.6.12-rc6/arch/i386/kernel/scx200.c +--- linux-2.6.12-rc6.orig/arch/i386/kernel/scx200.c 2005-06-07 14:56:02.000000000 +0100 ++++ linux-2.6.12-rc6/arch/i386/kernel/scx200.c 2005-06-07 16:43:19.000000000 +0100 +@@ -27,6 +27,10 @@ long scx200_gpio_shadow[2]; + + unsigned scx200_cb_base = 0; + ++#ifdef CONFIG_SCx200HR_TIMER ++extern void __devinit scx200hr_timer_enable(void); ++#endif ++ + static struct pci_device_id scx200_tbl[] = { + { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SCx200_BRIDGE) }, + { PCI_DEVICE(PCI_VENDOR_ID_NS, PCI_DEVICE_ID_NS_SC1100_BRIDGE) }, +@@ -83,6 +87,9 @@ static int __devinit scx200_probe(struct + printk(KERN_INFO NAME ": Configuration Block base 0x%x\n", scx200_cb_base); + } + ++#ifdef CONFIG_SCx200HR_TIMER ++ scx200hr_timer_enable(); ++#endif + return 0; + } + +diff -Naurp linux-2.6.12-rc6.orig/arch/i386/kernel/timers/Makefile linux-2.6.12-rc6/arch/i386/kernel/timers/Makefile +--- linux-2.6.12-rc6.orig/arch/i386/kernel/timers/Makefile 2004-03-11 18:21:13.000000000 +0000 ++++ linux-2.6.12-rc6/arch/i386/kernel/timers/Makefile 2005-06-07 16:43:19.000000000 +0100 +@@ -5,5 +5,6 @@ + obj-y := timer.o timer_none.o timer_tsc.o timer_pit.o common.o + + obj-$(CONFIG_X86_CYCLONE_TIMER) += timer_cyclone.o ++obj-$(CONFIG_SCx200HR_TIMER) += timer_scx200hr.o + obj-$(CONFIG_HPET_TIMER) += timer_hpet.o + obj-$(CONFIG_X86_PM_TIMER) += timer_pm.o +diff -Naurp linux-2.6.12-rc6.orig/arch/i386/kernel/timers/timer.c linux-2.6.12-rc6/arch/i386/kernel/timers/timer.c +--- linux-2.6.12-rc6.orig/arch/i386/kernel/timers/timer.c 2004-12-26 14:07:37.000000000 +0000 ++++ linux-2.6.12-rc6/arch/i386/kernel/timers/timer.c 2005-06-07 16:43:19.000000000 +0100 +@@ -13,6 +13,9 @@ + #endif + /* list of timers, ordered by preference, NULL terminated */ + static struct init_timer_opts* __initdata timers[] = { ++#ifdef CONFIG_SCx200HR_TIMER ++ &timer_scx200hr_init, ++#endif + #ifdef CONFIG_X86_CYCLONE_TIMER + &timer_cyclone_init, + #endif +diff -Naurp linux-2.6.12-rc6.orig/arch/i386/kernel/timers/timer_scx200hr.c linux-2.6.12-rc6/arch/i386/kernel/timers/timer_scx200hr.c +--- linux-2.6.12-rc6.orig/arch/i386/kernel/timers/timer_scx200hr.c 1970-01-01 01:00:00.000000000 +0100 ++++ linux-2.6.12-rc6/arch/i386/kernel/timers/timer_scx200hr.c 2005-06-07 16:43:19.000000000 +0100 +@@ -0,0 +1,220 @@ ++/* ++ * Copyright (C) 2005 Ted Phelps ++ * ++ * This is a clock driver for the Geode SCx200's 27MHz high-resolution ++ * timer as the system clock replacing its buggy time stamp counter. ++ * ++ * Based on parts of timer_hpet.c, timer_tsc.c and timer_pit.c. ++ * ++ * This program is free software; you can redistribute it and/or ++ * modify it under the terms of the GNU General Public License as ++ * published by the Free Software Foundation; either version 2 of the ++ * License, or (at your option) any later version. ++ */ ++ ++#include ++#include ++#include ++#include ++#include ++ ++#define NAME "scx200hr" ++ ++/* Read the clock */ ++#define SCx200HR_CLOCK() inl(scx200_cb_base + SCx200_TIMER_OFFSET) ++ ++/* High-resolution timer configuration address */ ++#define SCx200_TMCNFG_OFFSET (SCx200_TIMER_OFFSET + 5) ++ ++/* Set this bit to disable the 27 MHz input clock */ ++#define HR_TM27MPD (1 << 2) ++ ++/* Set this bit to update the count-up timer once per cycle of the ++ * 27MHz timer, clear it to update the timer once every 27 cycles ++ * (effectively producing a 1MHz counter) */ ++#define HR_TMCLKSEL (1 << 1) ++ ++/* Set this bit to enable the high-resolution timer interrupt */ ++#define HR_TMEN (1 << 0) ++ ++/* The frequency of the timer. Change this to 27000000 and set ++ * HR_TMCLKSEL in scx200hr_enable to run at the faster clock rate. At ++ * this point in time there is no point in doing so since times are ++ * recorded in usec except for the monotonic clock, which is only used ++ * by the hangcheck-timer. */ ++#define HR_FREQ 1000000 ++ ++/* The number of cycles of the high-resolution timer we expect to see ++ * in a single tick. Note that the result is <<8 for greater precision*/ ++#define HR_CYCLES_PER_TICK \ ++ (SH_DIV(HR_FREQ / 1000000 * TICK_NSEC, 1000, 8)) ++ ++/* The number of cycles of the high-resolution timer we expect to see ++ * in one microsecond, <<8 */ ++#define HR_CYCLES_PER_US ((HR_FREQ / 1000000) << 8) ++ ++ ++/* The value of the timer at the last interrupt */ ++static u32 clock_at_last_interrupt; ++ ++/* The number of high-resolution clock cycles beyond what we would ++ have expected that the last tick occurred, <<8 for greater precision */ ++static long clock_delay; ++ ++/* The total number of timer nanoseconds between the time the timer ++ * went live and the most recent tick. */ ++static unsigned long long total_ns; ++ ++/* A lock to guard access to the monotonic clock-related variables ++ * (total_ns and clocal_at_last_interrupt). Note that these are also ++ * protected by the xtime lock. */ ++static seqlock_t hr_lock = SEQLOCK_UNLOCKED; ++ ++/* Nonzero if the timer has been selected */ ++static int enable_scx200hr; ++ ++static int __init scx200hr_init(char *override) ++{ ++ /* Watch for a command-line clock= override */ ++ if (override[0] && strncmp(override, NAME, sizeof(NAME) - 1) != 0) { ++ return -ENODEV; ++ } ++ ++ /* Note that we should try to enable this timer once the ++ * configuration block address is known */ ++ printk(KERN_WARNING NAME ": timer not yet accessible; will probe later.\n"); ++ enable_scx200hr = 1; ++ return -EAGAIN; ++} ++ ++/* Called by the timer interrupt. The xtime_lock will be held. */ ++static void mark_offset_scx200hr(void) ++{ ++ u32 now, delta; ++ ++ /* Avoid races between the interrupt handler and monotonic_clock */ ++ write_seqlock(&hr_lock); ++ ++ /* Determine how many cycles have elapsed since the last interrupt */ ++ now = SCx200HR_CLOCK(); ++ delta = (now - clock_at_last_interrupt) << 8; ++ clock_at_last_interrupt = now; ++ ++ /* Update the total us count and remainder */ ++ total_ns += (delta * 1000) / HR_CYCLES_PER_US; ++ ++ /* The monotonic clock is safe now */ ++ write_sequnlock(&hr_lock); ++ ++ /* Adjust for interrupt handling delay */ ++ delta += clock_delay; ++ ++ /* The high-resolution timer is driven by a different crystal ++ * to the main CPU, so there's no guarantee that the 1KHz ++ * interrupt rate will coincide with the timer. This keeps ++ * the jiffies count in line with the high-resolution timer, ++ * which makes it possible for NTP to do its magic */ ++ if (delta < HR_CYCLES_PER_TICK) { ++#if 1 ++ /* Didn't go over 1000us: decrement jiffies to balance ++ * out increment in do_timer. This will cause some ++ * jitter if the frequency offset is large, as that ++ * adjustment will be applied about 1ms late. */ ++ jiffies_64--; ++ clock_delay = delta; ++#else /* !1 */ ++ clock_delay = 0; ++#endif /* 1 */ ++ } else if (delta < (HR_CYCLES_PER_TICK << 1) + (HR_CYCLES_PER_TICK >> 1)) { ++ clock_delay = delta - HR_CYCLES_PER_TICK; ++ } else { ++ jiffies_64 += delta / HR_CYCLES_PER_TICK - 2; ++ clock_delay = HR_CYCLES_PER_TICK + delta % HR_CYCLES_PER_TICK; ++ } ++} ++ ++/* Called by gettimeofday(). Returns the number of microseconds since ++ * the last interrupt. This is called with the xtime_lock held.*/ ++static unsigned long get_offset_scx200hr(void) ++{ ++ u32 delta; ++ ++ /* Get the time now and determine how many cycles have ++ * transpired since the interrupt, adjusting for timer ++ * interrupt jitter. */ ++ delta = ((SCx200HR_CLOCK() - clock_at_last_interrupt) << 8) + clock_delay; ++ ++ /* Convert from cycles<<8 to microseconds */ ++ return delta / HR_CYCLES_PER_US; ++} ++ ++/* Returns the number of nanoseconds since the init of the timer. */ ++static unsigned long long monotonic_clock_scx200hr(void) ++{ ++ u32 delta, seq; ++ unsigned long long ns; ++ ++ /* This function is *not* called with xtime_lock held, so we ++ * need to get the hr_lock to ensure we're not competing with ++ * mark_offset_scx200hr. */ ++ do { ++ seq = read_seqbegin(&hr_lock); ++ ns = total_ns; ++ delta = SCx200HR_CLOCK() - clock_at_last_interrupt; ++ } while (read_seqretry(&hr_lock, seq)); ++ ++ /* Convert cycles to microseconds and add. */ ++ return ns + delta * 1000 / HR_CYCLES_PER_US; ++} ++ ++/* scx200hr timer_opts struct */ ++struct timer_opts timer_scx200hr = { ++ .name = NAME, ++ .mark_offset = mark_offset_scx200hr, ++ .get_offset = get_offset_scx200hr, ++ .monotonic_clock = monotonic_clock_scx200hr, ++ .delay = NULL ++}; ++ ++/* And the init_timer struct */ ++struct init_timer_opts __devinitdata timer_scx200hr_init = { ++ .init = scx200hr_init, ++ .opts = &timer_scx200hr ++}; ++ ++ ++/* Switch from the original timer to the high-resolution timer */ ++void __devinit scx200hr_timer_enable(void) ++{ ++ /* Make sure the timer was requested and that the ++ * configuration block is present */ ++ if (!enable_scx200hr || !scx200_cb_present()) { ++ return; ++ } ++ ++ /* Reserve the timer region for ourselves */ ++ if (!request_region(scx200_cb_base + SCx200_TIMER_OFFSET, ++ SCx200_TIMER_SIZE, ++ "NatSemi SCx200 High-Resolution Timer")) { ++ printk(KERN_WARNING NAME ": unable to lock timer region\n"); ++ return; ++ } ++ ++ /* Configure the timer */ ++ outb(0, scx200_cb_base + SCx200_TMCNFG_OFFSET); ++ ++ /* Record the current value of the timer. */ ++ clock_at_last_interrupt = SCx200HR_CLOCK(); ++ ++ /* Get the current value of the monotonic clock */ ++ total_ns = cur_timer->monotonic_clock(); ++ ++ /* Switch from the original timer functions to ours, but keep ++ * the current delay function since loops_per_jiffy will have ++ * been computed using that */ ++ timer_scx200hr.delay = cur_timer->delay; ++ cur_timer = &timer_scx200hr; ++ ++ printk(KERN_INFO "switching to scx200 high-resolution timer (%lu cpt)\n", ++ HR_CYCLES_PER_TICK); ++} +diff -Naurp linux-2.6.12-rc6.orig/include/asm-i386/timer.h linux-2.6.12-rc6/include/asm-i386/timer.h +--- linux-2.6.12-rc6.orig/include/asm-i386/timer.h 2005-06-07 14:56:11.000000000 +0100 ++++ linux-2.6.12-rc6/include/asm-i386/timer.h 2005-06-07 16:43:19.000000000 +0100 +@@ -50,6 +50,9 @@ extern struct init_timer_opts timer_tsc_ + #ifdef CONFIG_X86_CYCLONE_TIMER + extern struct init_timer_opts timer_cyclone_init; + #endif ++#ifdef CONFIG_SCx200HR_TIMER ++extern struct init_timer_opts timer_scx200hr_init; ++#endif + + extern unsigned long calibrate_tsc(void); + extern void init_cpu_khz(void); +diff -Naurp linux-2.6.12-rc6.orig/include/linux/scx200.h linux-2.6.12-rc6/include/linux/scx200.h +--- linux-2.6.12-rc6.orig/include/linux/scx200.h 2005-06-07 14:56:11.000000000 +0100 ++++ linux-2.6.12-rc6/include/linux/scx200.h 2005-06-07 16:43:19.000000000 +0100 +@@ -32,7 +32,7 @@ extern unsigned scx200_cb_base; + + /* High Resolution Timer */ + #define SCx200_TIMER_OFFSET 0x08 +-#define SCx200_TIMER_SIZE 0x05 ++#define SCx200_TIMER_SIZE 0x06 + + /* Clock Generators */ + #define SCx200_CLOCKGEN_OFFSET 0x10 diff --git a/openwrt/target/linux/linux-2.6/x86.mk b/openwrt/target/linux/linux-2.6/x86.mk new file mode 100644 index 000000000..12ff4bd51 --- /dev/null +++ b/openwrt/target/linux/linux-2.6/x86.mk @@ -0,0 +1,10 @@ +# $Id$ + +# x86 specific kmod packages + +$(LINUX_BUILD_DIR)/bzImage: $(LINUX_DIR)/vmlinux + $(MAKE) -C $(LINUX_DIR) V=1 CROSS_COMPILE=$(TARGET_CROSS) ARCH=$(LINUX_KARCH) PATH=$(TARGET_PATH) bzImage $(MAKE_TRACE) + cp -f $(LINUX_DIR)/arch/i386/boot/bzImage $@ + touch $@ + +compile: $(LINUX_BUILD_DIR)/bzImage diff --git a/openwrt/target/linux/package/base-files/files/x86-2.6/etc/config/network b/openwrt/target/linux/package/base-files/files/x86-2.6/etc/config/network new file mode 100644 index 000000000..fd0f557c0 --- /dev/null +++ b/openwrt/target/linux/package/base-files/files/x86-2.6/etc/config/network @@ -0,0 +1,12 @@ +# Network configuration file + +## LAN configuration +lan_ifname="br0" +lan_ifnames="eth1 eth2" +lan_proto="static" +lan_ipaddr="192.168.1.1" +lan_netmask="255.255.255.0" + +## WAN configuration +wan_ifname="eth0" +wan_proto="dhcp" diff --git a/openwrt/target/linux/package/base-files/files/x86-2.6/etc/network.overrides b/openwrt/target/linux/package/base-files/files/x86-2.6/etc/network.overrides new file mode 100644 index 000000000..e857d5b5f --- /dev/null +++ b/openwrt/target/linux/package/base-files/files/x86-2.6/etc/network.overrides @@ -0,0 +1,26 @@ +# NVRAM overrides +# +# This file handles the NVRAM quirks of various hardware. +# THIS FILE IS NOT A REPLACEMENT FOR NVRAM + +# Load sysconf defaults +[ -f /etc/sysconf ] && . /etc/sysconf + +DEFAULT_lan_proto="static" +DEFAULT_lan_ifname="br0" +DEFAULT_lan_ifnames="eth0" +DEFAULT_lan_ipaddr=${BR2_SYSCONF_FAILSAFE_IP:-"192.168.1.1"} +DEFAULT_lan_netmask=${BR2_SYSCONF_FAILSAFE_NETMASK:-"255.255.255.0"} +DEFAULT_lan_hwaddr=${BR2_SYSCONF_FAILSAFE_MAC:-"00:0B:AD:0A:DD:00"} + +# failsafe if reset is held +[ "$FAILSAFE" = "true" ] && { + echo "### YOU ARE IN FAILSAFE MODE ####" + lan_ifname=${DEFAULT_lan_proto} + lan_ifnames=${FAILSAFE_ifnames:-${DEFAULT_lan_ifnames}} + lan_ipaddr=$DEFAULT_lan_ipaddr + lan_netmask=$DEFAULT_lan_netmask + lan_hwaddr=$DEFAULT_lan_hwaddr + wan_ifname="none" + wifi_ifname="none" +}