From: nbd Date: Wed, 29 Apr 2009 13:02:41 +0000 (+0000) Subject: Add a driver for Atheros AR8216 switches X-Git-Url: https://git.rohieb.name/openwrt.git/commitdiff_plain/681d7f126b95ad5640be5c20a71fcebb4528f84e Add a driver for Atheros AR8216 switches Thanks to Vertical Communications, Inc. for providing access to the documentation git-svn-id: svn://svn.openwrt.org/openwrt/trunk@15482 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- diff --git a/target/linux/generic-2.6/config-2.6.28 b/target/linux/generic-2.6/config-2.6.28 index 582730251..5e1024bfd 100644 --- a/target/linux/generic-2.6/config-2.6.28 +++ b/target/linux/generic-2.6/config-2.6.28 @@ -19,6 +19,7 @@ CONFIG_AIO=y # CONFIG_AMIGA_PARTITION is not set CONFIG_ANON_INODES=y # CONFIG_APPLICOM is not set +# CONFIG_AR8216_PHY is not set CONFIG_ARCH_FLATMEM_ENABLE=y # CONFIG_ARCNET is not set CONFIG_ARPD=y diff --git a/target/linux/generic-2.6/config-2.6.29 b/target/linux/generic-2.6/config-2.6.29 index 7b3eb6dc1..b80a79e71 100644 --- a/target/linux/generic-2.6/config-2.6.29 +++ b/target/linux/generic-2.6/config-2.6.29 @@ -20,6 +20,7 @@ CONFIG_AIO=y # CONFIG_AMIGA_PARTITION is not set CONFIG_ANON_INODES=y # CONFIG_APPLICOM is not set +# CONFIG_AR8216_PHY is not set CONFIG_ARCH_FLATMEM_ENABLE=y # CONFIG_ARCNET is not set CONFIG_ARPD=y diff --git a/target/linux/generic-2.6/config-2.6.30 b/target/linux/generic-2.6/config-2.6.30 index 46b1b7ad3..a8cd53e71 100644 --- a/target/linux/generic-2.6/config-2.6.30 +++ b/target/linux/generic-2.6/config-2.6.30 @@ -20,6 +20,7 @@ CONFIG_AIO=y # CONFIG_AMIGA_PARTITION is not set CONFIG_ANON_INODES=y # CONFIG_APPLICOM is not set +# CONFIG_AR8216_PHY is not set CONFIG_ARCH_FLATMEM_ENABLE=y # CONFIG_ARCNET is not set CONFIG_ARPD=y diff --git a/target/linux/generic-2.6/files/drivers/net/phy/ar8216.c b/target/linux/generic-2.6/files/drivers/net/phy/ar8216.c new file mode 100644 index 000000000..d83845c53 --- /dev/null +++ b/target/linux/generic-2.6/files/drivers/net/phy/ar8216.c @@ -0,0 +1,528 @@ +/* + * ar8216.c: AR8216 switch driver + * + * Copyright (C) 2009 Felix Fietkau + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include +#include "ar8216.h" + +#define AR8216_REG_PORT_RATE(_i) (AR8216_PORT_OFFSET(_i) + 0x000c) +#define AR8216_REG_PORT_PRIO(_i) (AR8216_PORT_OFFSET(_i) + 0x0010) + +struct ar8216_priv { + struct switch_dev dev; + struct phy_device *phy; + u32 (*read)(struct ar8216_priv *priv, int reg); + void (*write)(struct ar8216_priv *priv, int reg, u32 val); + /* all fields below are cleared on reset */ + bool vlan; + u8 vlan_id[AR8216_NUM_VLANS]; + u8 vlan_table[AR8216_NUM_VLANS]; + u8 vlan_tagged; + u16 pvid[AR8216_NUM_PORTS]; +}; +static struct switch_dev athdev; + +#define to_ar8216(_dev) container_of(_dev, struct ar8216_priv, dev) + +static inline void +split_addr(u32 regaddr, u16 *r1, u16 *r2, u16 *page) +{ + regaddr >>= 1; + *r1 = regaddr & 0x1e; + + regaddr >>= 5; + *r2 = regaddr & 0x7; + + regaddr >>= 3; + *page = regaddr & 0x1ff; +} + +static u32 +ar8216_mii_read(struct ar8216_priv *priv, int reg) +{ + struct phy_device *phy = priv->phy; + u16 r1, r2, page; + u16 lo, hi; + + split_addr((u32) reg, &r1, &r2, &page); + phy->bus->write(phy->bus, 0x18, 0, page); + lo = phy->bus->read(phy->bus, 0x10 | r2, r1); + hi = phy->bus->read(phy->bus, 0x10 | r2, r1 + 1); + + return (hi << 16) | lo; +} + +static void +ar8216_mii_write(struct ar8216_priv *priv, int reg, u32 val) +{ + struct phy_device *phy = priv->phy; + u16 r1, r2, r3; + u16 lo, hi; + + split_addr((u32) reg, &r1, &r2, &r3); + phy->bus->write(phy->bus, 0x18, 0, r3); + + lo = val & 0xffff; + hi = (u16) (val >> 16); + phy->bus->write(phy->bus, 0x10 | r2, r1 + 1, hi); + phy->bus->write(phy->bus, 0x10 | r2, r1, lo); +} + +static u32 +ar8216_rmw(struct ar8216_priv *priv, int reg, u32 mask, u32 val) +{ + u32 v; + + v = priv->read(priv, reg); + v &= ~mask; + v |= val; + priv->write(priv, reg, v); + + return v; +} + +static int +ar8216_set_vlan(struct switch_dev *dev, const struct switch_attr *attr, + struct switch_val *val) +{ + struct ar8216_priv *priv = to_ar8216(dev); + priv->vlan = !!val->value.i; + return 0; +} + +static int +ar8216_get_vlan(struct switch_dev *dev, const struct switch_attr *attr, + struct switch_val *val) +{ + struct ar8216_priv *priv = to_ar8216(dev); + val->value.i = priv->vlan; + return 0; +} + + +static int +ar8216_set_pvid(struct switch_dev *dev, int port, int vlan) +{ + struct ar8216_priv *priv = to_ar8216(dev); + priv->pvid[port] = vlan; + return 0; +} + +static int +ar8216_get_pvid(struct switch_dev *dev, int port, int *vlan) +{ + struct ar8216_priv *priv = to_ar8216(dev); + *vlan = priv->pvid[port]; + return 0; +} + +static int +ar8216_set_vid(struct switch_dev *dev, const struct switch_attr *attr, + struct switch_val *val) +{ + struct ar8216_priv *priv = to_ar8216(dev); + priv->vlan_id[val->port_vlan] = val->value.i; + return 0; +} + +static int +ar8216_get_vid(struct switch_dev *dev, const struct switch_attr *attr, + struct switch_val *val) +{ + struct ar8216_priv *priv = to_ar8216(dev); + val->value.i = priv->vlan_id[val->port_vlan]; + return 0; +} + + +static struct switch_attr ar8216_globals[] = { + { + .type = SWITCH_TYPE_INT, + .name = "vlan", + .description = "Enable VLAN mode", + .set = ar8216_set_vlan, + .get = ar8216_get_vlan, + .max = 1 + }, +}; + +static struct switch_attr ar8216_port[] = { +}; + +static struct switch_attr ar8216_vlan[] = { + { + .type = SWITCH_TYPE_INT, + .name = "pvid", + .description = "VLAN ID", + .set = ar8216_set_vid, + .get = ar8216_get_vid, + .max = 4095, + }, +}; + + +static int +ar8216_get_ports(struct switch_dev *dev, struct switch_val *val) +{ + struct ar8216_priv *priv = to_ar8216(dev); + u8 ports = priv->vlan_table[val->port_vlan]; + int i; + + val->len = 0; + for (i = 0; i < AR8216_NUM_PORTS; i++) { + struct switch_port *p; + + if (!(ports & (1 << i))) + continue; + + p = &val->value.ports[val->len++]; + p->id = i; + if (priv->vlan_tagged & (1 << i)) + p->flags = (1 << SWITCH_PORT_FLAG_TAGGED); + else + p->flags = 0; + } + return 0; +} + +static int +ar8216_set_ports(struct switch_dev *dev, struct switch_val *val) +{ + struct ar8216_priv *priv = to_ar8216(dev); + u8 *vt = &priv->vlan_table[val->port_vlan]; + int i, j; + + *vt = 0; + for (i = 0; i < val->len; i++) { + struct switch_port *p = &val->value.ports[i]; + + if (p->flags & (1 << SWITCH_PORT_FLAG_TAGGED)) + priv->vlan_tagged |= (1 << p->id); + else { + priv->vlan_tagged &= ~(1 << p->id); + priv->pvid[p->id] = val->port_vlan; + + /* make sure that an untagged port does not + * appear in other vlans */ + for (j = 0; j < AR8216_NUM_VLANS; j++) { + if (j == val->port_vlan) + continue; + priv->vlan_table[j] &= ~(1 << p->id); + } + } + + *vt |= 1 << p->id; + } + return 0; +} + +static int +ar8216_wait_bit(struct ar8216_priv *priv, int reg, u32 mask, u32 val) +{ + int timeout = 20; + + while ((priv->read(priv, reg) & mask) != val) { + if (timeout-- <= 0) { + printk(KERN_ERR "ar8216: timeout waiting for operation to complete\n"); + return 1; + } + } + return 0; +} + +static void +ar8216_vtu_op(struct ar8216_priv *priv, u32 op, u32 val) +{ + if (ar8216_wait_bit(priv, AR8216_REG_VTU, AR8216_VTU_ACTIVE, 0)) + return; + if ((op & AR8216_VTU_OP) == AR8216_VTU_OP_LOAD) { + val &= AR8216_VTUDATA_MEMBER; + val |= AR8216_VTUDATA_VALID; + priv->write(priv, AR8216_REG_VTU_DATA, val); + } + op |= AR8216_VTU_ACTIVE; + priv->write(priv, AR8216_REG_VTU, op); +} + +static int +ar8216_hw_apply(struct switch_dev *dev) +{ + struct ar8216_priv *priv = to_ar8216(dev); + u8 portmask[AR8216_NUM_PORTS]; + int i, j; + + /* flush all vlan translation unit entries */ + ar8216_vtu_op(priv, AR8216_VTU_OP_FLUSH, 0); + + memset(portmask, 0, sizeof(portmask)); + if (priv->vlan) { + /* calculate the port destination masks and load vlans + * into the vlan translation unit */ + for (j = 0; j < AR8216_NUM_VLANS; j++) { + u8 vp = priv->vlan_table[j]; + + if (!vp) + continue; + + for (i = 0; i < AR8216_NUM_PORTS; i++) { + u8 mask = (1 << i); + if (vp & mask) + portmask[i] |= vp & ~mask; + } + + if (!priv->vlan_table[j]) + continue; + + ar8216_vtu_op(priv, + AR8216_VTU_OP_LOAD | + (priv->vlan_id[j] << AR8216_VTU_VID_S), + priv->vlan_table[j]); + } + } else { + /* vlan disabled: + * isolate all ports, but connect them to the cpu port */ + for (i = 0; i < AR8216_NUM_PORTS; i++) { + if (i == AR8216_PORT_CPU) + continue; + + portmask[i] = 1 << AR8216_PORT_CPU; + portmask[AR8216_PORT_CPU] |= (1 << i); + } + } + + /* update the port destination mask registers and tag settings */ + for (i = 0; i < AR8216_NUM_PORTS; i++) { + int egress, ingress; + int pvid; + + if (priv->vlan) { + pvid = priv->vlan_id[priv->pvid[i]]; + } else { + pvid = i; + } + + if (priv->vlan && (priv->vlan_tagged & (1 << i))) { + egress = AR8216_OUT_ADD_VLAN; + ingress = AR8216_IN_PORT_FALLBACK; + } else { + egress = AR8216_OUT_STRIP_VLAN; + ingress = AR8216_IN_SECURE; + } + + ar8216_rmw(priv, AR8216_REG_PORT_CTRL(i), + AR8216_PORT_CTRL_LEARN | AR8216_PORT_CTRL_VLAN_MODE | + AR8216_PORT_CTRL_SINGLE_VLAN | AR8216_PORT_CTRL_STATE | + AR8216_PORT_CTRL_HEADER | AR8216_PORT_CTRL_LEARN_LOCK, + AR8216_PORT_CTRL_LEARN | + (egress << AR8216_PORT_CTRL_VLAN_MODE_S) | + (priv->vlan ? AR8216_PORT_CTRL_SINGLE_VLAN : 0) | + (AR8216_PORT_STATE_FORWARD << AR8216_PORT_CTRL_STATE_S)); + + ar8216_rmw(priv, AR8216_REG_PORT_VLAN(i), + AR8216_PORT_VLAN_DEST_PORTS | AR8216_PORT_VLAN_MODE | + AR8216_PORT_VLAN_DEFAULT_ID, + (portmask[i] << AR8216_PORT_VLAN_DEST_PORTS_S) | + (ingress << AR8216_PORT_VLAN_MODE_S) | + (pvid << AR8216_PORT_VLAN_DEFAULT_ID_S)); + } + + return 0; +} + +static int +ar8216_reset_switch(struct switch_dev *dev) +{ + struct ar8216_priv *priv = to_ar8216(dev); + int i; + + memset(&priv->vlan, 0, sizeof(struct ar8216_priv) - + offsetof(struct ar8216_priv, vlan)); + for (i = 0; i < AR8216_NUM_VLANS; i++) { + priv->vlan_id[i] = i; + } + for (i = 0; i < AR8216_NUM_PORTS; i++) { + /* Enable port learning and tx */ + priv->write(priv, AR8216_REG_PORT_CTRL(i), + AR8216_PORT_CTRL_LEARN | + (4 << AR8216_PORT_CTRL_STATE_S)); + + priv->write(priv, AR8216_REG_PORT_VLAN(i), 0); + + /* Configure all PHYs */ + if (i == AR8216_PORT_CPU) { + priv->write(priv, AR8216_REG_PORT_STATUS(i), + AR8216_PORT_STATUS_LINK_UP | + AR8216_PORT_STATUS_SPEED | + AR8216_PORT_STATUS_TXMAC | + AR8216_PORT_STATUS_RXMAC | + AR8216_PORT_STATUS_DUPLEX); + } else { + priv->write(priv, AR8216_REG_PORT_STATUS(i), + AR8216_PORT_STATUS_LINK_AUTO); + } + } + /* XXX: undocumented magic from atheros, required! */ + priv->write(priv, 0x38, 0xc000050e); + return ar8216_hw_apply(dev); +} + +static int +ar8216_config_init(struct phy_device *pdev) +{ + struct ar8216_priv *priv; + int ret; + + printk("%s: AR8216 PHY driver attached.\n", pdev->attached_dev->name); + pdev->supported = ADVERTISED_100baseT_Full; + pdev->advertising = ADVERTISED_100baseT_Full; + + priv = kzalloc(sizeof(struct ar8216_priv), GFP_KERNEL); + if (priv == NULL) + return -ENOMEM; + + priv->phy = pdev; + priv->read = ar8216_mii_read; + priv->write = ar8216_mii_write; + memcpy(&priv->dev, &athdev, sizeof(struct switch_dev)); + pdev->priv = priv; + if ((ret = register_switch(&priv->dev, pdev->attached_dev)) < 0) { + kfree(priv); + goto done; + } + + ret = ar8216_reset_switch(&priv->dev); +done: + return ret; +} + +static int +ar8216_read_status(struct phy_device *phydev) +{ + struct ar8216_priv *priv = phydev->priv; + + phydev->speed = SPEED_100; + phydev->duplex = DUPLEX_FULL; + phydev->state = PHY_UP; + + /* flush the address translation unit */ + if (ar8216_wait_bit(priv, AR8216_REG_ATU, AR8216_ATU_ACTIVE, 0)) + return -ETIMEDOUT; + + priv->write(priv, AR8216_REG_ATU, AR8216_ATU_OP_FLUSH); + + return 0; +} + +static int +ar8216_config_aneg(struct phy_device *phydev) +{ + return 0; +} + +static int +ar8216_probe(struct phy_device *pdev) +{ + struct ar8216_priv priv; + + u8 id, rev; + u32 val; + + priv.phy = pdev; + val = ar8216_mii_read(&priv, AR8216_REG_CTRL); + rev = val & 0xff; + id = (val >> 8) & 0xff; + if ((id != 1) || (rev != 1)) + return -ENODEV; + + return 0; +} + +static void +ar8216_remove(struct phy_device *pdev) +{ + struct ar8216_priv *priv = pdev->priv; + + if (!priv) + return; + + unregister_switch(&priv->dev); + kfree(priv); +} + +/* template */ +static struct switch_dev athdev = { + .name = "Atheros AR8216", + .cpu_port = AR8216_PORT_CPU, + .ports = AR8216_NUM_PORTS, + .vlans = AR8216_NUM_VLANS, + .attr_global = { + .attr = ar8216_globals, + .n_attr = ARRAY_SIZE(ar8216_globals), + }, + .attr_port = { + .attr = ar8216_port, + .n_attr = ARRAY_SIZE(ar8216_port), + }, + .attr_vlan = { + .attr = ar8216_vlan, + .n_attr = ARRAY_SIZE(ar8216_vlan), + }, + .get_port_pvid = ar8216_get_pvid, + .set_port_pvid = ar8216_set_pvid, + .get_vlan_ports = ar8216_get_ports, + .set_vlan_ports = ar8216_set_ports, + .apply_config = ar8216_hw_apply, + .reset_switch = ar8216_reset_switch, +}; + +static struct phy_driver ar8216_driver = { + .name = "Atheros AR8216", + .features = PHY_BASIC_FEATURES, + .probe = ar8216_probe, + .remove = ar8216_remove, + .config_init = &ar8216_config_init, + .config_aneg = &ar8216_config_aneg, + .read_status = &ar8216_read_status, + .driver = { .owner = THIS_MODULE }, +}; + +int __init +ar8216_init(void) +{ + return phy_driver_register(&ar8216_driver); +} + +void __exit +ar8216_exit(void) +{ + phy_driver_unregister(&ar8216_driver); +} + +module_init(ar8216_init); +module_exit(ar8216_exit); +MODULE_LICENSE("GPL"); + diff --git a/target/linux/generic-2.6/files/drivers/net/phy/ar8216.h b/target/linux/generic-2.6/files/drivers/net/phy/ar8216.h new file mode 100644 index 000000000..a729ac442 --- /dev/null +++ b/target/linux/generic-2.6/files/drivers/net/phy/ar8216.h @@ -0,0 +1,147 @@ +/* + * ar8216.h: AR8216 switch driver + * + * Copyright (C) 2009 Felix Fietkau + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef __AR8216_H +#define __AR8216_H + +#define BITS(_s, _n) (((1UL << (_n)) - 1) << _s) + +#define AR8216_PORT_CPU 0 +#define AR8216_NUM_PORTS 6 +#define AR8216_NUM_VLANS 16 + +#define AR8216_REG_CTRL 0x0000 +#define AR8216_CTRL_RESET BIT(31) + +#define AR8216_REG_VTU 0x0040 +#define AR8216_VTU_OP BITS(0, 3) +#define AR8216_VTU_OP_NOOP 0x0 +#define AR8216_VTU_OP_FLUSH 0x1 +#define AR8216_VTU_OP_LOAD 0x2 +#define AR8216_VTU_OP_PURGE 0x3 +#define AR8216_VTU_OP_REMOVE_PORT 0x4 +#define AR8216_VTU_ACTIVE BIT(3) +#define AR8216_VTU_FULL BIT(4) +#define AR8216_VTU_PORT BITS(8, 4) +#define AR8216_VTU_PORT_S 8 +#define AR8216_VTU_VID BITS(16, 12) +#define AR8216_VTU_VID_S 16 +#define AR8216_VTU_PRIO BITS(28, 3) +#define AR8216_VTU_PRIO_S 28 +#define AR8216_VTU_PRIO_EN BIT(31) + +#define AR8216_REG_VTU_DATA 0x0044 +#define AR8216_VTUDATA_MEMBER BITS(0, 10) +#define AR8216_VTUDATA_VALID BIT(11) + +#define AR8216_REG_ATU 0x0050 +#define AR8216_ATU_OP BITS(0, 3) +#define AR8216_ATU_OP_NOOP 0x0 +#define AR8216_ATU_OP_FLUSH 0x1 +#define AR8216_ATU_OP_LOAD 0x2 +#define AR8216_ATU_OP_PURGE 0x3 +#define AR8216_ATU_OP_FLUSH_LOCKED 0x4 +#define AR8216_ATU_OP_FLUSH_UNICAST 0x5 +#define AR8216_ATU_OP_GET_NEXT 0x6 +#define AR8216_ATU_ACTIVE BIT(3) +#define AR8216_ATU_PORT_NUM BITS(8, 4) +#define AR8216_ATU_FULL_VIO BIT(12) +#define AR8216_ATU_ADDR4 BIT(16, 8) +#define AR8216_ATU_ADDR5 BIT(24, 8) + +#define AR8216_REG_ATU_DATA 0x0054 +#define AR8216_ATU_ADDR3 BIT(0, 8) +#define AR8216_ATU_ADDR2 BIT(8, 8) +#define AR8216_ATU_ADDR1 BIT(16, 8) +#define AR8216_ATU_ADDR0 BIT(24, 8) + +#define AR8216_PORT_OFFSET(_i) (0x0100 * (i + 1)) +#define AR8216_REG_PORT_STATUS(_i) (AR8216_PORT_OFFSET(_i) + 0x0000) +#define AR8216_PORT_STATUS_SPEED BIT(0) +#define AR8216_PORT_STATUS_SPEED_ERR BIT(1) +#define AR8216_PORT_STATUS_TXMAC BIT(2) +#define AR8216_PORT_STATUS_RXMAC BIT(3) +#define AR8216_PORT_STATUS_TXFLOW BIT(4) +#define AR8216_PORT_STATUS_RXFLOW BIT(5) +#define AR8216_PORT_STATUS_DUPLEX BIT(6) +#define AR8216_PORT_STATUS_LINK_UP BIT(8) +#define AR8216_PORT_STATUS_LINK_AUTO BIT(9) +#define AR8216_PORT_STATUS_LINK_PAUSE BIT(10) + +#define AR8216_REG_PORT_CTRL(_i) (AR8216_PORT_OFFSET(_i) + 0x0004) + +/* port forwarding state */ +#define AR8216_PORT_CTRL_STATE BITS(0, 3) +#define AR8216_PORT_CTRL_STATE_S 0 + +#define AR8216_PORT_CTRL_LEARN_LOCK BIT(7) + +/* egress 802.1q mode */ +#define AR8216_PORT_CTRL_VLAN_MODE BITS(8, 2) +#define AR8216_PORT_CTRL_VLAN_MODE_S 8 + +#define AR8216_PORT_CTRL_IGMP_SNOOP BIT(10) +#define AR8216_PORT_CTRL_HEADER BIT(11) +#define AR8216_PORT_CTRL_MAC_LOOP BIT(12) +#define AR8216_PORT_CTRL_SINGLE_VLAN BIT(13) +#define AR8216_PORT_CTRL_LEARN BIT(14) +#define AR8216_PORT_CTRL_MIRROR_TX BIT(16) +#define AR8216_PORT_CTRL_MIRROR_RX BIT(17) + +#define AR8216_REG_PORT_VLAN(_i) (AR8216_PORT_OFFSET(_i) + 0x0008) + +#define AR8216_PORT_VLAN_DEFAULT_ID BITS(0, 12) +#define AR8216_PORT_VLAN_DEFAULT_ID_S 0 + +#define AR8216_PORT_VLAN_DEST_PORTS BITS(16, 9) +#define AR8216_PORT_VLAN_DEST_PORTS_S 16 + +/* bit0 added to the priority field of egress frames */ +#define AR8216_PORT_VLAN_TX_PRIO BIT(27) + +/* port default priority */ +#define AR8216_PORT_VLAN_PRIORITY BITS(28, 2) +#define AR8216_PORT_VLAN_PRIORITY_S 28 + +/* ingress 802.1q mode */ +#define AR8216_PORT_VLAN_MODE BITS(30, 2) +#define AR8216_PORT_VLAN_MODE_S 30 + +/* ingress 802.1q mode */ +enum { + AR8216_IN_PORT_ONLY = 0, + AR8216_IN_PORT_FALLBACK = 1, + AR8216_IN_VLAN_ONLY = 2, + AR8216_IN_SECURE = 3 +}; + +/* egress 802.1q mode */ +enum { + AR8216_OUT_KEEP = 0, + AR8216_OUT_STRIP_VLAN = 1, + AR8216_OUT_ADD_VLAN = 2 +}; + +/* port forwarding state */ +enum { + AR8216_PORT_STATE_DISABLED = 0, + AR8216_PORT_STATE_BLOCK = 1, + AR8216_PORT_STATE_LISTEN = 2, + AR8216_PORT_STATE_LEARN = 3, + AR8216_PORT_STATE_FORWARD = 4 +}; + +#endif diff --git a/target/linux/generic-2.6/patches-2.6.28/680-phy_ar8216.patch b/target/linux/generic-2.6/patches-2.6.28/680-phy_ar8216.patch new file mode 100644 index 000000000..2e9bab10e --- /dev/null +++ b/target/linux/generic-2.6/patches-2.6.28/680-phy_ar8216.patch @@ -0,0 +1,23 @@ +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -84,6 +84,10 @@ config IP175C_PHY + tristate "Driver for IC+ IP175C/IP178C switches" + select SWCONFIG + ++config AR8216_PHY ++ tristate "Driver for Atheros AR8216 switches" ++ select SWCONFIG ++ + config FIXED_PHY + bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" + depends on PHYLIB=y +--- a/drivers/net/phy/Makefile ++++ b/drivers/net/phy/Makefile +@@ -16,6 +16,7 @@ obj-$(CONFIG_ICPLUS_PHY) += icplus.o + obj-$(CONFIG_ADM6996_PHY) += adm6996.o + obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o + obj-$(CONFIG_IP175C_PHY) += ip175c.o ++obj-$(CONFIG_AR8216_PHY) += ar8216.o + obj-$(CONFIG_REALTEK_PHY) += realtek.o + obj-$(CONFIG_FIXED_PHY) += fixed.o + obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o diff --git a/target/linux/generic-2.6/patches-2.6.29/680-phy_ar8216.patch b/target/linux/generic-2.6/patches-2.6.29/680-phy_ar8216.patch new file mode 100644 index 000000000..2e9bab10e --- /dev/null +++ b/target/linux/generic-2.6/patches-2.6.29/680-phy_ar8216.patch @@ -0,0 +1,23 @@ +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -84,6 +84,10 @@ config IP175C_PHY + tristate "Driver for IC+ IP175C/IP178C switches" + select SWCONFIG + ++config AR8216_PHY ++ tristate "Driver for Atheros AR8216 switches" ++ select SWCONFIG ++ + config FIXED_PHY + bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" + depends on PHYLIB=y +--- a/drivers/net/phy/Makefile ++++ b/drivers/net/phy/Makefile +@@ -16,6 +16,7 @@ obj-$(CONFIG_ICPLUS_PHY) += icplus.o + obj-$(CONFIG_ADM6996_PHY) += adm6996.o + obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o + obj-$(CONFIG_IP175C_PHY) += ip175c.o ++obj-$(CONFIG_AR8216_PHY) += ar8216.o + obj-$(CONFIG_REALTEK_PHY) += realtek.o + obj-$(CONFIG_FIXED_PHY) += fixed.o + obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o diff --git a/target/linux/generic-2.6/patches-2.6.30/680-phy_ar8216.patch b/target/linux/generic-2.6/patches-2.6.30/680-phy_ar8216.patch new file mode 100644 index 000000000..2e9bab10e --- /dev/null +++ b/target/linux/generic-2.6/patches-2.6.30/680-phy_ar8216.patch @@ -0,0 +1,23 @@ +--- a/drivers/net/phy/Kconfig ++++ b/drivers/net/phy/Kconfig +@@ -84,6 +84,10 @@ config IP175C_PHY + tristate "Driver for IC+ IP175C/IP178C switches" + select SWCONFIG + ++config AR8216_PHY ++ tristate "Driver for Atheros AR8216 switches" ++ select SWCONFIG ++ + config FIXED_PHY + bool "Driver for MDIO Bus/PHY emulation with fixed speed/link PHYs" + depends on PHYLIB=y +--- a/drivers/net/phy/Makefile ++++ b/drivers/net/phy/Makefile +@@ -16,6 +16,7 @@ obj-$(CONFIG_ICPLUS_PHY) += icplus.o + obj-$(CONFIG_ADM6996_PHY) += adm6996.o + obj-$(CONFIG_MVSWITCH_PHY) += mvswitch.o + obj-$(CONFIG_IP175C_PHY) += ip175c.o ++obj-$(CONFIG_AR8216_PHY) += ar8216.o + obj-$(CONFIG_REALTEK_PHY) += realtek.o + obj-$(CONFIG_FIXED_PHY) += fixed.o + obj-$(CONFIG_MDIO_BITBANG) += mdio-bitbang.o