From: kaloz <kaloz@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Mon, 8 Feb 2010 21:55:13 +0000 (+0000)
Subject: [gemini]: upgrade to 2.6.32
X-Git-Url: https://git.rohieb.name/openwrt.git/commitdiff_plain/a707b20c7cc23205c111671b38b1eea3bc917922
[gemini]: upgrade to 2.6.32
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@19558 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
diff --git a/target/linux/gemini/Makefile b/target/linux/gemini/Makefile
index d0e7bb9cc..d23322735 100644
--- a/target/linux/gemini/Makefile
+++ b/target/linux/gemini/Makefile
@@ -1,5 +1,5 @@
#
-# Copyright (C) 2009 OpenWrt.org
+# Copyright (C) 2009-2010 OpenWrt.org
#
# This is free software, licensed under the GNU General Public License v2.
# See /LICENSE for more information.
@@ -12,7 +12,7 @@ BOARDNAME:=Cortina Systems CS351x
FEATURES:=squashfs
CFLAGS:=-Os -pipe -march=armv4 -mtune=arm9tdmi -funit-at-a-time
-LINUX_VERSION:=2.6.30.10
+LINUX_VERSION:=2.6.32.7
include $(INCLUDE_DIR)/target.mk
diff --git a/target/linux/gemini/patches/001-git_sync.patch b/target/linux/gemini/patches/001-git_sync.patch
index 2087769be..5d48cf0e6 100644
--- a/target/linux/gemini/patches/001-git_sync.patch
+++ b/target/linux/gemini/patches/001-git_sync.patch
@@ -8,7 +8,7 @@
/*
* Debugging stuff
-@@ -330,7 +331,7 @@ params: ldr r0, =params_phys
+@@ -337,7 +338,7 @@ params: ldr r0, =params_phys
* This routine must preserve:
* r4, r5, r6, r7, r8
*/
@@ -17,7 +17,7 @@
cache_on: mov r3, #8 @ cache_on function
b call_cache_fn
-@@ -499,7 +500,7 @@ __common_mmu_cache_on:
+@@ -519,7 +520,7 @@ __common_mmu_cache_on:
mcr p15, 0, r3, c2, c0, 0 @ load page table pointer
mcr p15, 0, r1, c3, c0, 0 @ load domain access control
b 1f
@@ -26,16 +26,16 @@
1: mcr p15, 0, r0, c1, c0, 0 @ load control register
mrc p15, 0, r0, c1, c0, 0 @ and read it back to
sub pc, lr, r0, lsr #32 @ properly flush pipeline
-@@ -518,7 +519,7 @@ __common_mmu_cache_on:
+@@ -539,7 +540,7 @@ __common_mmu_cache_on:
* r8 = atags pointer
- * r9-r14 = corrupted
+ * r9-r12,r14 = corrupted
*/
- .align 5
+ .align L1_CACHE_SHIFT
reloc_start: add r9, r5, r0
sub r9, r9, #128 @ do not copy the stack
debug_reloc_start
-@@ -722,7 +723,7 @@ proc_types:
+@@ -768,7 +769,7 @@ proc_types:
* On exit, r0, r1, r2, r3, r12 corrupted
* This routine must preserve: r4, r6, r7
*/
@@ -44,7 +44,7 @@
cache_off: mov r3, #12 @ cache_off function
b call_cache_fn
-@@ -791,7 +792,7 @@ __armv3_mmu_cache_off:
+@@ -845,7 +846,7 @@ __armv3_mmu_cache_off:
* This routine must preserve:
* r0, r4, r5, r6, r7
*/
@@ -53,20 +53,6 @@
cache_clean_flush:
mov r3, #16
b call_cache_fn
---- a/arch/arm/include/asm/cache.h
-+++ b/arch/arm/include/asm/cache.h
-@@ -4,7 +4,11 @@
- #ifndef __ASMARM_CACHE_H
- #define __ASMARM_CACHE_H
-
-+#ifdef CONFIG_CPU_FA526
-+#define L1_CACHE_SHIFT 4
-+#else
- #define L1_CACHE_SHIFT 5
-+#endif
- #define L1_CACHE_BYTES (1 << L1_CACHE_SHIFT)
-
- /*
--- a/arch/arm/include/asm/dma-mapping.h
+++ b/arch/arm/include/asm/dma-mapping.h
@@ -98,7 +98,7 @@ static inline int dma_set_mask(struct de
@@ -80,7 +66,7 @@
static inline int dma_is_consistent(struct device *dev, dma_addr_t handle)
--- a/arch/arm/Kconfig
+++ b/arch/arm/Kconfig
-@@ -825,7 +825,7 @@ config ISA_DMA_API
+@@ -923,7 +923,7 @@ config ISA_DMA_API
bool
config PCI
@@ -91,16 +77,16 @@
bus system, i.e. the way the CPU talks to the other stuff inside
--- a/arch/arm/kernel/entry-armv.S
+++ b/arch/arm/kernel/entry-armv.S
-@@ -21,6 +21,7 @@
- #include <mach/entry-macro.S>
+@@ -22,6 +22,7 @@
#include <asm/thread_notify.h>
#include <asm/unwind.h>
+ #include <asm/unistd.h>
+#include <asm/cache.h>
#include "entry-header.S"
-@@ -153,7 +154,7 @@ ENDPROC(__und_invalid)
- stmia r5, {r0 - r4}
+@@ -166,7 +167,7 @@ ENDPROC(__und_invalid)
+ asm_trace_hardirqs_off
.endm
- .align 5
@@ -108,7 +94,7 @@
__dabt_svc:
svc_entry
-@@ -202,7 +203,7 @@ __dabt_svc:
+@@ -214,7 +215,7 @@ __dabt_svc:
UNWIND(.fnend )
ENDPROC(__dabt_svc)
@@ -117,7 +103,7 @@
__irq_svc:
svc_entry
-@@ -247,7 +248,7 @@ svc_preempt:
+@@ -255,7 +256,7 @@ svc_preempt:
b 1b
#endif
@@ -126,7 +112,7 @@
__und_svc:
#ifdef CONFIG_KPROBES
@ If a kprobe is about to simulate a "stmdb sp..." instruction,
-@@ -286,7 +287,7 @@ __und_svc:
+@@ -301,7 +302,7 @@ __und_svc:
UNWIND(.fnend )
ENDPROC(__und_svc)
@@ -135,7 +121,7 @@
__pabt_svc:
svc_entry
-@@ -329,7 +330,7 @@ __pabt_svc:
+@@ -337,7 +338,7 @@ __pabt_svc:
UNWIND(.fnend )
ENDPROC(__pabt_svc)
@@ -144,7 +130,7 @@
.LCcralign:
.word cr_alignment
#ifdef MULTI_DABORT
-@@ -400,7 +401,7 @@ ENDPROC(__pabt_svc)
+@@ -412,7 +413,7 @@ ENDPROC(__pabt_svc)
#endif
.endm
@@ -153,7 +139,7 @@
__dabt_usr:
usr_entry
kuser_cmpxchg_check
-@@ -432,7 +433,7 @@ __dabt_usr:
+@@ -444,7 +445,7 @@ __dabt_usr:
UNWIND(.fnend )
ENDPROC(__dabt_usr)
@@ -162,7 +148,7 @@
__irq_usr:
usr_entry
kuser_cmpxchg_check
-@@ -465,7 +466,7 @@ ENDPROC(__irq_usr)
+@@ -476,7 +477,7 @@ ENDPROC(__irq_usr)
.ltorg
@@ -171,7 +157,7 @@
__und_usr:
usr_entry
-@@ -668,7 +669,7 @@ __und_usr_unknown:
+@@ -692,7 +693,7 @@ __und_usr_unknown:
b do_undefinstr
ENDPROC(__und_usr_unknown)
@@ -180,7 +166,7 @@
__pabt_usr:
usr_entry
-@@ -778,7 +779,7 @@ ENDPROC(__switch_to)
+@@ -803,7 +804,7 @@ ENDPROC(__switch_to)
#endif
.endm
@@ -189,7 +175,7 @@
.globl __kuser_helper_start
__kuser_helper_start:
-@@ -818,7 +819,7 @@ __kuser_memory_barrier: @ 0xffff0fa0
+@@ -843,7 +844,7 @@ __kuser_memory_barrier: @ 0xffff0fa0
smp_dmb
usr_ret lr
@@ -198,7 +184,7 @@
/*
* Reference prototype:
-@@ -950,7 +951,7 @@ kuser_cmpxchg_fixup:
+@@ -975,7 +976,7 @@ kuser_cmpxchg_fixup:
#endif
@@ -207,7 +193,7 @@
/*
* Reference prototype:
-@@ -1032,7 +1033,7 @@ __kuser_helper_end:
+@@ -1058,7 +1059,7 @@ __kuser_helper_end:
* of which is copied into r0 for the mode specific abort handler.
*/
.macro vector_stub, name, mode, correction=0
@@ -216,7 +202,7 @@
vector_\name:
.if \correction
-@@ -1157,7 +1158,7 @@ __stubs_start:
+@@ -1189,7 +1190,7 @@ __stubs_start:
.long __und_invalid @ e
.long __und_invalid @ f
@@ -225,7 +211,7 @@
/*=============================================================================
* Undefined FIQs
-@@ -1187,7 +1188,7 @@ vector_addrexcptn:
+@@ -1219,7 +1220,7 @@ vector_addrexcptn:
* We group all the following data together to optimise
* for CPUs with separate I & D caches.
*/
@@ -252,7 +238,7 @@
/*
* This is the fast syscall return path. We do as little as
* possible here, and this includes saving r0 back into the SVC
-@@ -178,7 +179,7 @@ ftrace_stub:
+@@ -183,7 +184,7 @@ ftrace_stub:
#define A710(code...)
#endif
@@ -261,7 +247,7 @@
ENTRY(vector_swi)
sub sp, sp, #S_FRAME_SIZE
stmia sp, {r0 - r12} @ Calling r0 - r12
-@@ -306,7 +307,7 @@ __sys_trace_return:
+@@ -316,7 +317,7 @@ __sys_trace_return:
bl syscall_trace
b ret_slow_syscall
@@ -280,7 +266,7 @@
#if (PHYS_OFFSET & 0x001fffff)
#error "PHYS_OFFSET must be at an even 2MiB boundary!"
-@@ -187,7 +188,7 @@ ENDPROC(__enable_mmu)
+@@ -192,7 +193,7 @@ ENDPROC(__enable_mmu)
*
* other registers depend on the function called upon completion
*/
@@ -291,15 +277,15 @@
mcr p15, 0, r0, c1, c0, 0 @ write control reg
--- a/arch/arm/kernel/vmlinux.lds.S
+++ b/arch/arm/kernel/vmlinux.lds.S
-@@ -6,6 +6,7 @@
- #include <asm-generic/vmlinux.lds.h>
+@@ -7,6 +7,7 @@
#include <asm/thread_info.h>
#include <asm/memory.h>
+ #include <asm/page.h>
+#include <asm/cache.h>
OUTPUT_ARCH(arm)
ENTRY(stext)
-@@ -58,7 +59,7 @@ SECTIONS
+@@ -59,7 +60,7 @@ SECTIONS
*(.security_initcall.init)
__security_initcall_end = .;
#ifdef CONFIG_BLK_DEV_INITRD
@@ -308,7 +294,7 @@
__initramfs_start = .;
usr/built-in.o(.init.ramfs)
__initramfs_end = .;
-@@ -153,13 +154,13 @@ SECTIONS
+@@ -176,13 +177,13 @@ SECTIONS
/*
* then the cacheline aligned data
*/
@@ -324,22 +310,6 @@
__start___ex_table = .;
#ifdef CONFIG_MMU
*(__ex_table)
---- a/arch/arm/lib/copy_page.S
-+++ b/arch/arm/lib/copy_page.S
-@@ -12,11 +12,12 @@
- #include <linux/linkage.h>
- #include <asm/assembler.h>
- #include <asm/asm-offsets.h>
-+#include <asm/cache.h>
-
- #define COPY_COUNT (PAGE_SZ/64 PLD( -1 ))
-
- .text
-- .align 5
-+ .align L1_CACHE_SHIFT
- /*
- * StrongARM optimised copy_page routine
- * now 1.78bytes/cycle, was 1.60 bytes/cycle (50MHz bus -> 89MB/s)
--- a/arch/arm/lib/memchr.S
+++ b/arch/arm/lib/memchr.S
@@ -11,9 +11,10 @@
@@ -4129,7 +4099,7 @@
+gemini_negmac-objs := gm_gmac.o
--- a/drivers/net/Kconfig
+++ b/drivers/net/Kconfig
-@@ -2087,6 +2087,13 @@ config ACENIC_OMIT_TIGON_I
+@@ -2126,6 +2126,13 @@ config ACENIC_OMIT_TIGON_I
The safe and default value for this is N.
@@ -4145,7 +4115,7 @@
depends on PCI
--- a/drivers/net/Makefile
+++ b/drivers/net/Makefile
-@@ -234,6 +234,7 @@ pasemi_mac_driver-objs := pasemi_mac.o p
+@@ -247,6 +247,7 @@ pasemi_mac_driver-objs := pasemi_mac.o p
obj-$(CONFIG_MLX4_CORE) += mlx4/
obj-$(CONFIG_ENC28J60) += enc28j60.o
obj-$(CONFIG_ETHOC) += ethoc.o
@@ -4617,7 +4587,7 @@
+};
--- a/drivers/usb/host/ehci.h
+++ b/drivers/usb/host/ehci.h
-@@ -543,7 +543,12 @@ static inline unsigned int
+@@ -552,7 +552,12 @@ static inline unsigned int
ehci_port_speed(struct ehci_hcd *ehci, unsigned int portsc)
{
if (ehci_is_TDI(ehci)) {
@@ -4625,14 +4595,14 @@
+ portsc = readl(ehci_to_hcd(ehci)->regs + 0x80);
+ switch ((portsc>>22)&3) {
+#else
- switch ((portsc>>26)&3) {
+ switch ((portsc >> (ehci->has_hostpc ? 25 : 26)) & 3) {
+#endif
case 0:
return 0;
case 1:
--- a/drivers/usb/host/ehci-hcd.c
+++ b/drivers/usb/host/ehci-hcd.c
-@@ -192,9 +192,11 @@ static int ehci_halt (struct ehci_hcd *e
+@@ -194,9 +194,11 @@ static int ehci_halt (struct ehci_hcd *e
if ((temp & STS_HALT) != 0)
return 0;
@@ -4644,7 +4614,7 @@
return handshake (ehci, &ehci->regs->status,
STS_HALT, STS_HALT, 16 * 125);
}
-@@ -250,8 +252,8 @@ static int ehci_reset (struct ehci_hcd *
+@@ -263,8 +265,8 @@ static int ehci_reset (struct ehci_hcd *
if (retval)
return retval;
@@ -4653,9 +4623,9 @@
+// if (ehci_is_TDI(ehci))
+// tdi_reset (ehci);
- return retval;
- }
-@@ -381,12 +383,13 @@ static void ehci_silence_controller(stru
+ if (ehci->debug)
+ dbgp_external_startup();
+@@ -397,12 +399,13 @@ static void ehci_silence_controller(stru
{
ehci_halt(ehci);
ehci_turn_off_all_ports(ehci);
@@ -4670,7 +4640,7 @@
}
/* ehci_shutdown kick in for silicon on any bus (not just pci, etc).
-@@ -631,7 +634,9 @@ static int ehci_run (struct usb_hcd *hcd
+@@ -653,7 +656,9 @@ static int ehci_run (struct usb_hcd *hcd
// Philips, Intel, and maybe others need CMD_RUN before the
// root hub will detect new devices (why?); NEC doesn't
ehci->command &= ~(CMD_LRESET|CMD_IAAD|CMD_PSE|CMD_ASE|CMD_RESET);
@@ -4680,7 +4650,7 @@
ehci_writel(ehci, ehci->command, &ehci->regs->command);
dbg_cmd (ehci, "init", ehci->command);
-@@ -651,9 +656,11 @@ static int ehci_run (struct usb_hcd *hcd
+@@ -673,9 +678,11 @@ static int ehci_run (struct usb_hcd *hcd
*/
down_write(&ehci_cf_port_reset_rwsem);
hcd->state = HC_STATE_RUNNING;
@@ -4690,9 +4660,9 @@
msleep(5);
+#endif
up_write(&ehci_cf_port_reset_rwsem);
+ ehci->last_periodic_enable = ktime_get_real();
- temp = HC_VERSION(ehci_readl(ehci, &ehci->caps->hc_capbase));
-@@ -744,9 +751,10 @@ static irqreturn_t ehci_irq (struct usb_
+@@ -767,9 +774,10 @@ static irqreturn_t ehci_irq (struct usb_
pcd_status = status;
/* resume root hub? */
@@ -4704,7 +4674,7 @@
while (i--) {
int pstatus = ehci_readl(ehci,
&ehci->regs->port_status [i]);
-@@ -778,7 +786,9 @@ static irqreturn_t ehci_irq (struct usb_
+@@ -802,7 +810,9 @@ static irqreturn_t ehci_irq (struct usb_
ehci_halt(ehci);
dead:
ehci_reset(ehci);
@@ -4714,7 +4684,7 @@
/* generic layer kills/unlinks all urbs, then
* uses ehci_stop to clean up the rest
*/
-@@ -1045,6 +1055,11 @@ MODULE_LICENSE ("GPL");
+@@ -1101,6 +1111,11 @@ MODULE_LICENSE ("GPL");
#define PCI_DRIVER ehci_pci_driver
#endif
@@ -4728,7 +4698,7 @@
#define PLATFORM_DRIVER ehci_fsl_driver
--- a/drivers/usb/host/ehci-hub.c
+++ b/drivers/usb/host/ehci-hub.c
-@@ -749,6 +749,12 @@ static int ehci_hub_control (
+@@ -809,6 +809,12 @@ static int ehci_hub_control (
/* see what we found out */
temp = check_reset_complete (ehci, wIndex, status_reg,
ehci_readl(ehci, status_reg));
@@ -4743,10 +4713,10 @@
if (!(temp & (PORT_RESUME|PORT_RESET)))
--- a/drivers/usb/Kconfig
+++ b/drivers/usb/Kconfig
-@@ -57,6 +57,7 @@ config USB_ARCH_HAS_EHCI
- default y if PPC_83xx
- default y if SOC_AU1200
+@@ -60,6 +60,7 @@ config USB_ARCH_HAS_EHCI
default y if ARCH_IXP4XX
+ default y if ARCH_W90X900
+ default y if ARCH_AT91SAM9G45
+ default y if ARCH_GEMINI
default PCI
@@ -5124,7 +5094,7 @@
+MODULE_ALIAS("platform:gemini-wdt");
--- a/drivers/watchdog/Kconfig
+++ b/drivers/watchdog/Kconfig
-@@ -104,6 +104,16 @@ config 977_WATCHDOG
+@@ -111,6 +111,16 @@ config 977_WATCHDOG
Not sure? It's safe to say N.
@@ -5143,8 +5113,8 @@
depends on ARCH_IXP2000
--- a/drivers/watchdog/Makefile
+++ b/drivers/watchdog/Makefile
-@@ -30,6 +30,7 @@ obj-$(CONFIG_AT91SAM9X_WATCHDOG) += at91
- obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.o
+@@ -31,6 +31,7 @@ obj-$(CONFIG_OMAP_WATCHDOG) += omap_wdt.
+ obj-$(CONFIG_TWL4030_WATCHDOG) += twl4030_wdt.o
obj-$(CONFIG_21285_WATCHDOG) += wdt285.o
obj-$(CONFIG_977_WATCHDOG) += wdt977.o
+obj-$(CONFIG_GEMINI_WATCHDOG) += gemini_wdt.o
@@ -5165,3 +5135,23 @@
/* CONFIGFLAG: offset 0x40 */
u32 configured_flag;
#define FLAG_CF (1<<0) /* true: we'll support "high speed" */
+--- a/arch/arm/mm/Kconfig
++++ b/arch/arm/mm/Kconfig
+@@ -774,5 +774,6 @@ config CACHE_XSC3L2
+
+ config ARM_L1_CACHE_SHIFT
+ int
++ default 4 if CPU_FA526
+ default 6 if ARCH_OMAP3
+ default 5
+--- a/arch/arm/lib/copy_page.S
++++ b/arch/arm/lib/copy_page.S
+@@ -17,7 +17,7 @@
+ #define COPY_COUNT (PAGE_SZ / (2 * L1_CACHE_BYTES) PLD( -1 ))
+
+ .text
+- .align 5
++ .align L1_CACHE_SHIFT
+ /*
+ * StrongARM optimised copy_page routine
+ * now 1.78bytes/cycle, was 1.60 bytes/cycle (50MHz bus -> 89MB/s)