From: kaloz Date: Wed, 21 Sep 2005 09:55:03 +0000 (+0000) Subject: move diag module outside of kernel directory X-Git-Url: https://git.rohieb.name/openwrt.git/commitdiff_plain/fe81993ab10a0e94d88d241cd47200011e917f59 move diag module outside of kernel directory git-svn-id: svn://svn.openwrt.org/openwrt/trunk@1968 3c298f89-4303-0410-b956-a3cf2f4a3e73 --- diff --git a/openwrt/target/linux/Config.in b/openwrt/target/linux/Config.in index 4eb2a6d47..f5cf16679 100644 --- a/openwrt/target/linux/Config.in +++ b/openwrt/target/linux/Config.in @@ -86,12 +86,6 @@ config BR2_PACKAGE_KMOD_CPMAC help Driver for the AR7 CPMAC network chip -config BR2_PACKAGE_KMOD_DIAG - tristate "Router LED/Button Driver" - default y - help - Driver for the LEDs on Wireless Routers (diag) - config BR2_PACKAGE_KMOD_BRCM_WL tristate "Broadcom Wireless Network Driver" depends BR2_LINUX_2_4_BRCM diff --git a/openwrt/target/linux/control/kmod-diag.control b/openwrt/target/linux/control/kmod-diag.control deleted file mode 100644 index 8e7603cf0..000000000 --- a/openwrt/target/linux/control/kmod-diag.control +++ /dev/null @@ -1,6 +0,0 @@ -Package: kmod-diag -Priority: essential -Section: sys -Maintainer: Felix Fietkau -Source: buildroot internal -Description: Driver for Router LEDs and Buttons diff --git a/openwrt/target/linux/linux-2.4/README b/openwrt/target/linux/linux-2.4/README index d5e2d6392..8dff7fccc 100644 --- a/openwrt/target/linux/linux-2.4/README +++ b/openwrt/target/linux/linux-2.4/README @@ -89,9 +89,6 @@ brcm/ 003-bcm47xx_cache_fixes.patch -004-diag_led.patch - OpenWrt diag (led and reset button) driver - ar7/ TI AR7 specific patches diff --git a/openwrt/target/linux/linux-2.4/broadcom.mk b/openwrt/target/linux/linux-2.4/broadcom.mk index 4fc142490..bde9e1491 100644 --- a/openwrt/target/linux/linux-2.4/broadcom.mk +++ b/openwrt/target/linux/linux-2.4/broadcom.mk @@ -6,9 +6,6 @@ ############################################################# # broadcom specific kmod packages -$(eval $(call KMOD_template,DIAG,diag,\ - $(MODULES_DIR)/kernel/drivers/net/diag/diag.o \ -)) $(eval $(call KMOD_template,BRCM_WL,brcm-wl,\ $(MODULES_DIR)/kernel/drivers/net/wl/wl.o \ ,CONFIG_WL)) diff --git a/openwrt/target/linux/linux-2.4/patches/brcm/004-diag_led.patch b/openwrt/target/linux/linux-2.4/patches/brcm/004-diag_led.patch deleted file mode 100644 index 7ec20df57..000000000 --- a/openwrt/target/linux/linux-2.4/patches/brcm/004-diag_led.patch +++ /dev/null @@ -1,278 +0,0 @@ -diff -urN linux-2.4.30.dev/drivers/net/Makefile linux-2.4.30.dev2/drivers/net/Makefile ---- linux-2.4.30.dev/drivers/net/Makefile 2005-08-22 01:41:45.930653216 +0200 -+++ linux-2.4.30.dev2/drivers/net/Makefile 2005-08-22 01:58:04.162939304 +0200 -@@ -41,6 +41,8 @@ - obj-$(CONFIG_ISDN) += slhc.o - endif - -+subdir-m += diag -+ - subdir-$(CONFIG_HND) += hnd - subdir-$(CONFIG_ET) += et - subdir-$(CONFIG_WL) += wl -diff -urN linux-2.4.30.dev/drivers/net/diag/Makefile linux-2.4.30.dev2/drivers/net/diag/Makefile ---- linux-2.4.30.dev/drivers/net/diag/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.30.dev2/drivers/net/diag/Makefile 2005-08-22 00:12:23.655170000 +0200 -@@ -0,0 +1,13 @@ -+#$Id: 005-diag_led.patch,v 1.1.2.1 2005/08/22 01:56:06 nbd Exp $ -+ -+EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include -DBCMDRIVER -+ -+O_TARGET := diag.o -+ -+MAC_OBJS := diag_led.o -+ -+export-objs := -+obj-y := $(MAC_OBJS) -+obj-m := $(O_TARGET) -+ -+include $(TOPDIR)/Rules.make -diff -urN linux-2.4.30.dev/drivers/net/diag/diag_led.c linux-2.4.30.dev2/drivers/net/diag/diag_led.c ---- linux-2.4.30.dev/drivers/net/diag/diag_led.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.4.30.dev2/drivers/net/diag/diag_led.c 2005-08-22 03:37:58.112053448 +0200 -@@ -0,0 +1,245 @@ -+/* -+ * diag_led.c - replacement diag module -+ * -+ * Copyright (C) 2004 Mike Baker, -+ * Imre Kaloz -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2 -+ * of the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * $Id: 005-diag_led.patch,v 1.1.2.1 2005/08/22 01:56:06 nbd Exp $ -+ */ -+ -+/* -+ * ChangeLog: -+ * 2004/03/28 initial release -+ * 2004/08/26 asus & buffalo support added -+ * 2005/03/14 asus wl-500g deluxe and buffalo v2 support added -+ * 2005/04/13 added licensing informations -+ * 2005/04/18 base reset polarity off initial readings -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+extern char * nvram_get(const char *name); -+static void *sbh; -+ -+// v2.x - - - - - -+#define DIAG_GPIO (1<<1) -+#define DMZ_GPIO (1<<7) -+ -+static void set_gpio(uint32 mask, uint32 value) { -+ sb_gpiocontrol(sbh,mask,0); -+ sb_gpioouten(sbh,mask,mask); -+ sb_gpioout(sbh,mask,value); -+} -+ -+static void v2_set_diag(u8 state) { -+ set_gpio(DIAG_GPIO,state); -+} -+static void v2_set_dmz(u8 state) { -+ set_gpio(DMZ_GPIO,state); -+} -+ -+// v1.x - - - - - -+#define LED_DIAG 0x13 -+#define LED_DMZ 0x12 -+ -+static void v1_set_diag(u8 state) { -+ if (!state) { -+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG)=0xFF; -+ } else { -+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG); -+ } -+} -+static void v1_set_dmz(u8 state) { -+ if (!state) { -+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ)=0xFF; -+ } else { -+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ); -+ } -+} -+ -+// - - - - - -+static void ignore(u8 ignored) {}; -+ -+// - - - - - -+#define BIT_DMZ 0x01 -+#define BIT_DIAG 0x04 -+ -+void (*set_diag)(u8 state); -+void (*set_dmz)(u8 state); -+ -+static unsigned int diag = 0; -+ -+static void diag_change() -+{ -+ set_diag(0xFF); // off -+ set_dmz(0xFF); // off -+ -+ if(diag & BIT_DIAG) -+ set_diag(0x00); // on -+ if(diag & BIT_DMZ) -+ set_dmz(0x00); // on -+} -+ -+static int proc_diag(ctl_table *table, int write, struct file *filp, -+ void *buffer, size_t *lenp) -+{ -+ int r; -+ r = proc_dointvec(table, write, filp, buffer, lenp); -+ if (write && !r) { -+ diag_change(); -+ } -+ return r; -+} -+ -+// - - - - - -+static unsigned char reset_gpio = 0; -+static unsigned char reset_polarity = 0; -+static unsigned int reset = 0; -+ -+static int proc_reset(ctl_table *table, int write, struct file *filp, -+ void *buffer, size_t *lenp) -+{ -+ -+ if (reset_gpio) { -+ sb_gpiocontrol(sbh,reset_gpio,reset_gpio); -+ sb_gpioouten(sbh,reset_gpio,0); -+ reset=!(sb_gpioin(sbh)&reset_gpio); -+ -+ if (reset_polarity) reset=!reset; -+ } else { -+ reset=0; -+ } -+ -+ return proc_dointvec(table, write, filp, buffer, lenp); -+} -+ -+// - - - - - -+static struct ctl_table_header *diag_sysctl_header; -+ -+static ctl_table sys_diag[] = { -+ { -+ ctl_name: 2000, -+ procname: "diag", -+ data: &diag, -+ maxlen: sizeof(diag), -+ mode: 0644, -+ proc_handler: proc_diag -+ }, -+ { -+ ctl_name: 2001, -+ procname: "reset", -+ data: &reset, -+ maxlen: sizeof(reset), -+ mode: 0444, -+ proc_handler: proc_reset -+ }, -+ { 0 } -+}; -+ -+static int __init diag_init() -+{ -+ char *buf; -+ u32 board_type; -+ sbh = sb_kattach(); -+ sb_gpiosetcore(sbh); -+ -+ board_type = sb_boardtype(sbh); -+ printk(KERN_INFO "diag boardtype: %08x\n",board_type); -+ -+ set_diag=ignore; -+ set_dmz=ignore; -+ -+ buf=nvram_get("boardrev"); -+ if (((board_type & 0xf00) == 0x400) && strcmp(buf,"0x10")) { -+ buf=nvram_get("boardtype")?:""; -+ if (!strcmp(buf,"bcm94710dev")) { -+ buf=nvram_get("boardnum")?:""; -+ if (!strcmp(buf,"42")) { -+ // wrt54g v1.x -+ set_diag=v1_set_diag; -+ set_dmz=v1_set_dmz; -+ reset_gpio=(1<<6); -+ } -+ if (!strcmp(buf,"asusX")) { -+ //asus wl-500g -+ reset_gpio=(1<<6); -+ } -+ } -+ if (!strcmp(buf,"bcm94710ap")) { -+ buf=nvram_get("boardnum")?:""; -+ if (!strcmp(buf,"42")) { -+ // buffalo -+ set_dmz=v2_set_dmz; -+ reset_gpio=(1<<4); -+ } -+ if (!strcmp(buf,"44")) { -+ //dell truemobile -+ set_dmz=v2_set_dmz; -+ reset_gpio=(1<<0); -+ } -+ } -+ } else { -+ buf=nvram_get("boardnum")?:""; -+ if (!strcmp(buf,"42")) { -+ //linksys -+ set_diag=v2_set_diag; -+ set_dmz=v2_set_dmz; -+ reset_gpio=(1<<6); -+ } -+ if (!strcmp(buf,"44")) { -+ //motorola -+ reset_gpio=(1<<5); -+ } -+ if (!strcmp(buf,"00")) { -+ //buffalo -+ reset_gpio=(1<<7); -+ } -+ if (!strcmp(buf,"45")) { -+ //wl-500g deluxe -+ reset_gpio=(1<<6); -+ } -+ } -+ -+ -+ sb_gpiocontrol(sbh,reset_gpio,reset_gpio); -+ sb_gpioouten(sbh,reset_gpio,0); -+ reset_polarity=!(sb_gpioin(sbh)&reset_gpio); -+ -+ diag_sysctl_header = register_sysctl_table(sys_diag, 0); -+ diag_change(); -+ -+ return 0; -+} -+ -+static void __exit diag_exit() -+{ -+ unregister_sysctl_table(diag_sysctl_header); -+} -+ -+EXPORT_NO_SYMBOLS; -+MODULE_AUTHOR("openwrt.org"); -+MODULE_LICENSE("GPL"); -+ -+module_init(diag_init); -+module_exit(diag_exit); diff --git a/openwrt/target/linux/linux-2.6/broadcom.mk b/openwrt/target/linux/linux-2.6/broadcom.mk index 758cf063d..f34fe6ac6 100644 --- a/openwrt/target/linux/linux-2.6/broadcom.mk +++ b/openwrt/target/linux/linux-2.6/broadcom.mk @@ -1,6 +1,3 @@ # $Id$ # # broadcom specific kmod packages -$(eval $(call KMOD_template,DIAG,diag,\ - $(MODULES_DIR)/kernel/drivers/net/diag/diag.ko \ -)) diff --git a/openwrt/target/linux/linux-2.6/patches/brcm/002-diag_led.patch b/openwrt/target/linux/linux-2.6/patches/brcm/002-diag_led.patch deleted file mode 100644 index a0f36e669..000000000 --- a/openwrt/target/linux/linux-2.6/patches/brcm/002-diag_led.patch +++ /dev/null @@ -1,288 +0,0 @@ -diff -Nur linux-2.6.12.5/drivers/net/Kconfig linux-2.6.12.5-diag/drivers/net/Kconfig ---- linux-2.6.12.5/drivers/net/Kconfig 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-diag/drivers/net/Kconfig 2005-09-10 23:08:53.209908656 +0200 -@@ -41,6 +41,11 @@ - Instead of 'dummy', the devices will then be called 'dummy0', - 'dummy1' etc. - -+config DIAG_LED -+ tristate "Led driver for Broadcom BCM97xx" -+ ---help--- -+ Say m if you like the led to signal status of operation. -+ - config BONDING - tristate "Bonding driver support" - depends on NETDEVICES -diff -Nur linux-2.6.12.5/drivers/net/Makefile linux-2.6.12.5-diag/drivers/net/Makefile ---- linux-2.6.12.5/drivers/net/Makefile 2005-08-15 02:20:18.000000000 +0200 -+++ linux-2.6.12.5-diag/drivers/net/Makefile 2005-09-08 17:49:02.249278160 +0200 -@@ -1,6 +1,7 @@ - # - # Makefile for the Linux network (ethercard) device drivers. - # -+obj-$(CONFIG_DIAG_LED) += diag/ - - ifeq ($(CONFIG_ISDN_PPP),y) - obj-$(CONFIG_ISDN) += slhc.o -diff -Nur linux-2.6.12.5/drivers/net/diag/Makefile linux-2.6.12.5-diag/drivers/net/diag/Makefile ---- linux-2.6.12.5/drivers/net/diag/Makefile 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-diag/drivers/net/diag/Makefile 2005-09-10 19:45:26.596290216 +0200 -@@ -0,0 +1,5 @@ -+#$Id$ -+ -+EXTRA_CFLAGS := -I$(TOPDIR)/arch/mips/bcm947xx/include -DBCMDRIVER -+ -+obj-$(CONFIG_DIAG_LED) += diag.o -diff -Nur linux-2.6.12.5/drivers/net/diag/diag.c linux-2.6.12.5-diag/drivers/net/diag/diag.c ---- linux-2.6.12.5/drivers/net/diag/diag.c 1970-01-01 01:00:00.000000000 +0100 -+++ linux-2.6.12.5-diag/drivers/net/diag/diag.c 2005-09-10 18:51:02.727849016 +0200 -@@ -0,0 +1,249 @@ -+/* -+ * diag_led.c - replacement diag module -+ * -+ * Copyright (C) 2004 Mike Baker, -+ * Imre Kaloz -+ * -+ * This program is free software; you can redistribute it and/or -+ * modify it under the terms of the GNU General Public License -+ * as published by the Free Software Foundation; either version 2 -+ * of the License, or (at your option) any later version. -+ * -+ * This program is distributed in the hope that it will be useful, -+ * but WITHOUT ANY WARRANTY; without even the implied warranty of -+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -+ * GNU General Public License for more details. -+ * -+ * You should have received a copy of the GNU General Public License -+ * along with this program; if not, write to the Free Software -+ * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -+ * -+ * $Id$ -+ */ -+ -+/* -+ * ChangeLog: -+ * 2004/03/28 initial release -+ * 2004/08/26 asus & buffalo support added -+ * 2005/03/14 asus wl-500g deluxe and buffalo v2 support added -+ * 2005/04/13 added licensing informations -+ * 2005/04/18 base reset polarity off initial readings -+ */ -+ -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+#include -+ -+extern char * nvram_get(const char *name); -+static void *sbh; -+ -+// v2.x - - - - - -+#define DIAG_GPIO (1<<1) -+#define DMZ_GPIO (1<<7) -+ -+/* -+static void set_gpio(uint32 mask, uint32 value) { -+ sb_gpiocontrol(sbh,mask,0); -+ sb_gpioouten(sbh,mask,mask); -+ sb_gpioout(sbh,mask,value); -+} -+ -+static void v2_set_diag(u8 state) { -+ set_gpio(DIAG_GPIO,state); -+} -+static void v2_set_dmz(u8 state) { -+ set_gpio(DMZ_GPIO,state); -+} -+*/ -+ -+/* -+// v1.x - - - - - -+#define LED_DIAG 0x13 -+#define LED_DMZ 0x12 -+ -+static void v1_set_diag(u8 state) { -+ if (!state) { -+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG)=0xFF; -+ } else { -+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG); -+ } -+} -+static void v1_set_dmz(u8 state) { -+ if (!state) { -+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ)=0xFF; -+ } else { -+ *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ); -+ } -+} -+*/ -+ -+// - - - - - -+static void ignore(u8 ignored) {}; -+ -+// - - - - - -+#define BIT_DMZ 0x01 -+#define BIT_DIAG 0x04 -+ -+void (*set_diag)(u8 state); -+void (*set_dmz)(u8 state); -+ -+static unsigned int diag = 0; -+ -+static void diag_change() -+{ -+ set_diag(0xFF); // off -+ set_dmz(0xFF); // off -+ -+ if(diag & BIT_DIAG) -+ set_diag(0x00); // on -+ if(diag & BIT_DMZ) -+ set_dmz(0x00); // on -+} -+ -+static int proc_diag(ctl_table *table, int write, struct file *filp, -+ void *buffer, size_t *lenp, loff_t *ppos) -+{ -+ int r; -+ r = proc_dointvec(table, write, filp, buffer, lenp, ppos); -+ if (write && !r) { -+ diag_change(); -+ } -+ return r; -+} -+ -+// - - - - - -+static unsigned char reset_gpio = 0; -+static unsigned char reset_polarity = 0; -+static unsigned int reset = 0; -+ -+static int proc_reset(ctl_table *table, int write, struct file *filp, -+ void *buffer, size_t *lenp, loff_t *ppos) -+{ -+ -+ if (reset_gpio) { -+ sb_gpiocontrol(sbh,reset_gpio,reset_gpio); -+ sb_gpioouten(sbh,reset_gpio,0); -+ reset=!(sb_gpioin(sbh)&reset_gpio); -+ -+ if (reset_polarity) reset=!reset; -+ } else { -+ reset=0; -+ } -+ -+ return proc_dointvec(table, write, filp, buffer, lenp, ppos); -+} -+ -+// - - - - - -+static struct ctl_table_header *diag_sysctl_header; -+ -+static ctl_table sys_diag[] = { -+ { -+ ctl_name: 2000, -+ procname: "diag", -+ data: &diag, -+ maxlen: sizeof(diag), -+ mode: 0644, -+ proc_handler: proc_diag -+ }, -+ { -+ ctl_name: 2001, -+ procname: "reset", -+ data: &reset, -+ maxlen: sizeof(reset), -+ mode: 0444, -+ proc_handler: proc_reset -+ }, -+ { 0 } -+}; -+ -+static int __init diag_init() -+{ -+ //char *buf; -+ u32 board_type; -+ sbh = sb_kattach(); -+ sb_gpiosetcore(sbh); -+ -+ board_type = sb_boardtype(sbh); -+ printk(KERN_INFO "diag boardtype: %08x\n",board_type); -+ -+ set_diag=ignore; -+ set_dmz=ignore; -+ -+ /* -+ buf=nvram_get("boardrev"); -+ if (((board_type & 0xf00) == 0x400) && strcmp(buf,"0x10")) { -+ buf=nvram_get("boardtype")?:""; -+ if (!strcmp(buf,"bcm94710dev")) { -+ buf=nvram_get("boardnum")?:""; -+ if (!strcmp(buf,"42")) { -+ // wrt54g v1.x -+ set_diag=v1_set_diag; -+ set_dmz=v1_set_dmz; -+ reset_gpio=(1<<6); -+ } -+ if (!strcmp(buf,"asusX")) { -+ //asus wl-500g -+ reset_gpio=(1<<6); -+ } -+ } -+ if (!strcmp(buf,"bcm94710ap")) { -+ buf=nvram_get("boardnum")?:""; -+ if (!strcmp(buf,"42")) { -+ // buffalo -+ set_dmz=v2_set_dmz; -+ reset_gpio=(1<<4); -+ } -+ if (!strcmp(buf,"44")) { -+ //dell truemobile -+ set_dmz=v2_set_dmz; -+ reset_gpio=(1<<0); -+ } -+ } -+ } else { -+ buf=nvram_get("boardnum")?:""; -+ if (!strcmp(buf,"42")) { -+ //linksys -+ set_diag=v2_set_diag; -+ set_dmz=v2_set_dmz; -+ reset_gpio=(1<<6); -+ } -+ if (!strcmp(buf,"44")) { -+ //motorola -+ reset_gpio=(1<<5); -+ } -+ if (!strcmp(buf,"00")) { -+ //buffalo -+ reset_gpio=(1<<7); -+ } -+ if (!strcmp(buf,"45")) { -+ //wl-500g deluxe -+ reset_gpio=(1<<6); -+ } -+ } -+ -+ */ -+ sb_gpiocontrol(sbh,reset_gpio,reset_gpio); -+ sb_gpioouten(sbh,reset_gpio,0); -+ reset_polarity=!(sb_gpioin(sbh)&reset_gpio); -+ -+ diag_sysctl_header = register_sysctl_table(sys_diag, 0); -+ diag_change(); -+ -+ return 0; -+} -+ -+static void __exit diag_exit() -+{ -+ unregister_sysctl_table(diag_sysctl_header); -+} -+ -+MODULE_AUTHOR("openwrt.org"); -+MODULE_LICENSE("GPL"); -+ -+module_init(diag_init); -+module_exit(diag_exit); diff --git a/openwrt/target/linux/package/Config.in b/openwrt/target/linux/package/Config.in index 69fc1466b..b08debb77 100644 --- a/openwrt/target/linux/package/Config.in +++ b/openwrt/target/linux/package/Config.in @@ -1,4 +1,5 @@ source "target/linux/package/wlcompat/Config.in" +source "target/linux/package/diag/Config.in" source "target/linux/package/madwifi/Config.in" source "target/linux/package/fuse/Config.in" source "target/linux/package/mini_fo/Config.in" diff --git a/openwrt/target/linux/package/Makefile b/openwrt/target/linux/package/Makefile index e55cc54d4..d1cf0f783 100644 --- a/openwrt/target/linux/package/Makefile +++ b/openwrt/target/linux/package/Makefile @@ -10,6 +10,7 @@ package-y += openwrt ifeq ($(BOARD)-$(KERNEL),brcm-2.4) package-$(BR2_PACKAGE_KMOD_WLCOMPAT) += wlcompat +package-$(BR2_PACKAGE_KMOD_DIAG) += diag wlcompat-compile: openwrt-compile endif diff --git a/openwrt/target/linux/package/diag/Config.in b/openwrt/target/linux/package/diag/Config.in new file mode 100644 index 000000000..b58a99e62 --- /dev/null +++ b/openwrt/target/linux/package/diag/Config.in @@ -0,0 +1,5 @@ +config BR2_PACKAGE_KMOD_DIAG + tristate "kmod-diag" + default y + help + Driver for router LEDs and Buttons diff --git a/openwrt/target/linux/package/diag/Makefile b/openwrt/target/linux/package/diag/Makefile new file mode 100644 index 000000000..826fd07a8 --- /dev/null +++ b/openwrt/target/linux/package/diag/Makefile @@ -0,0 +1,37 @@ +# Makefile for the diag module +# +# $Id$ + +include $(TOPDIR)/rules.mk + +PKG_NAME := kmod-diag +PKG_RELEASE := 1 +PKG_BUILD_DIR := $(BUILD_DIR)/$(PKG_NAME) + +include $(TOPDIR)/package/rules.mk + +$(eval $(call PKG_template,KMOD_DIAG,$(PKG_NAME),$(LINUX_VERSION)-$(BOARD)-$(PKG_RELEASE),$(ARCH),kernel ($(LINUX_VERSION)-$(BOARD)-$(KERNEL_RELEASE)))) + +ifeq ($(KERNEL_DIR),) +KERNEL_DIR:=$(LINUX_DIR) +endif + +DIAG_FLAGS:=$(TARGET_CFLAGS) -D__KERNEL__ -fno-strict-aliasing -fno-common -fomit-frame-pointer -G 0 \ + -mno-abicalls -fno-pic -finline-limit=100000 -mabi=32 -march=mips32 -Wa,-32 -Wa,-march=mips32 \ + -Wa,-mips32 -Wa,--trap -Wstrict-prototypes -Wno-trigraphs -DMODULE -mlong-calls -fno-common -I. -I linux-2.4 -nostdinc \ + -iwithprefix include -I$(KERNEL_DIR)/include -I$(KERNEL_DIR)/include/asm/gcc -c -I$(KERNEL_DIR)/arch/mips/bcm947xx/include -DBCMDRIVER + +$(PKG_BUILD_DIR)/.prepared: + mkdir -p $(PKG_BUILD_DIR) + touch $@ + +$(PKG_BUILD_DIR)/.built: $(PKG_BUILD_DIR)/diag.o + touch $@ + +$(PKG_BUILD_DIR)/diag.o: $(PKG_BUILD_DIR)/.prepared + $(TARGET_CC) $(DIAG_FLAGS) -o $@ diag_led.c + +$(IPKG_KMOD_DIAG): $(PKG_BUILD_DIR)/diag.o + mkdir -p $(IDIR_KMOD_DIAG)/lib/modules/$(LINUX_VERSION) + cp $(PKG_BUILD_DIR)/diag.o $(IDIR_KMOD_DIAG)/lib/modules/$(LINUX_VERSION)/ + $(IPKG_BUILD) $(IDIR_KMOD_DIAG) $(PACKAGE_DIR) diff --git a/openwrt/target/linux/package/diag/diag_led.c b/openwrt/target/linux/package/diag/diag_led.c new file mode 100644 index 000000000..cc2bc8a24 --- /dev/null +++ b/openwrt/target/linux/package/diag/diag_led.c @@ -0,0 +1,245 @@ +/* + * diag_led.c - replacement diag module + * + * Copyright (C) 2004 Mike Baker, + * Imre Kaloz + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License + * as published by the Free Software Foundation; either version 2 + * of the License, or (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program; if not, write to the Free Software + * Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. + * + * $Id$ + */ + +/* + * ChangeLog: + * 2004/03/28 initial release + * 2004/08/26 asus & buffalo support added + * 2005/03/14 asus wl-500g deluxe and buffalo v2 support added + * 2005/04/13 added licensing informations + * 2005/04/18 base reset polarity off initial readings + */ + +#include +#include +#include +#include +#include +#include +#include +#include + +extern char * nvram_get(const char *name); +static void *sbh; + +// v2.x - - - - - +#define DIAG_GPIO (1<<1) +#define DMZ_GPIO (1<<7) + +static void set_gpio(uint32 mask, uint32 value) { + sb_gpiocontrol(sbh,mask,0); + sb_gpioouten(sbh,mask,mask); + sb_gpioout(sbh,mask,value); +} + +static void v2_set_diag(u8 state) { + set_gpio(DIAG_GPIO,state); +} +static void v2_set_dmz(u8 state) { + set_gpio(DMZ_GPIO,state); +} + +// v1.x - - - - - +#define LED_DIAG 0x13 +#define LED_DMZ 0x12 + +static void v1_set_diag(u8 state) { + if (!state) { + *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG)=0xFF; + } else { + *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DIAG); + } +} +static void v1_set_dmz(u8 state) { + if (!state) { + *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ)=0xFF; + } else { + *(volatile u8*)(KSEG1ADDR(BCM4710_EUART)+LED_DMZ); + } +} + +// - - - - - +static void ignore(u8 ignored) {}; + +// - - - - - +#define BIT_DMZ 0x01 +#define BIT_DIAG 0x04 + +void (*set_diag)(u8 state); +void (*set_dmz)(u8 state); + +static unsigned int diag = 0; + +static void diag_change() +{ + set_diag(0xFF); // off + set_dmz(0xFF); // off + + if(diag & BIT_DIAG) + set_diag(0x00); // on + if(diag & BIT_DMZ) + set_dmz(0x00); // on +} + +static int proc_diag(ctl_table *table, int write, struct file *filp, + void *buffer, size_t *lenp) +{ + int r; + r = proc_dointvec(table, write, filp, buffer, lenp); + if (write && !r) { + diag_change(); + } + return r; +} + +// - - - - - +static unsigned char reset_gpio = 0; +static unsigned char reset_polarity = 0; +static unsigned int reset = 0; + +static int proc_reset(ctl_table *table, int write, struct file *filp, + void *buffer, size_t *lenp) +{ + + if (reset_gpio) { + sb_gpiocontrol(sbh,reset_gpio,reset_gpio); + sb_gpioouten(sbh,reset_gpio,0); + reset=!(sb_gpioin(sbh)&reset_gpio); + + if (reset_polarity) reset=!reset; + } else { + reset=0; + } + + return proc_dointvec(table, write, filp, buffer, lenp); +} + +// - - - - - +static struct ctl_table_header *diag_sysctl_header; + +static ctl_table sys_diag[] = { + { + ctl_name: 2000, + procname: "diag", + data: &diag, + maxlen: sizeof(diag), + mode: 0644, + proc_handler: proc_diag + }, + { + ctl_name: 2001, + procname: "reset", + data: &reset, + maxlen: sizeof(reset), + mode: 0444, + proc_handler: proc_reset + }, + { 0 } +}; + +static int __init diag_init() +{ + char *buf; + u32 board_type; + sbh = sb_kattach(); + sb_gpiosetcore(sbh); + + board_type = sb_boardtype(sbh); + printk(KERN_INFO "diag boardtype: %08x\n",board_type); + + set_diag=ignore; + set_dmz=ignore; + + buf=nvram_get("boardrev"); + if (((board_type & 0xf00) == 0x400) && strcmp(buf,"0x10")) { + buf=nvram_get("boardtype")?:""; + if (!strcmp(buf,"bcm94710dev")) { + buf=nvram_get("boardnum")?:""; + if (!strcmp(buf,"42")) { + // wrt54g v1.x + set_diag=v1_set_diag; + set_dmz=v1_set_dmz; + reset_gpio=(1<<6); + } + if (!strcmp(buf,"asusX")) { + //asus wl-500g + reset_gpio=(1<<6); + } + } + if (!strcmp(buf,"bcm94710ap")) { + buf=nvram_get("boardnum")?:""; + if (!strcmp(buf,"42")) { + // buffalo + set_dmz=v2_set_dmz; + reset_gpio=(1<<4); + } + if (!strcmp(buf,"44")) { + //dell truemobile + set_dmz=v2_set_dmz; + reset_gpio=(1<<0); + } + } + } else { + buf=nvram_get("boardnum")?:""; + if (!strcmp(buf,"42")) { + //linksys + set_diag=v2_set_diag; + set_dmz=v2_set_dmz; + reset_gpio=(1<<6); + } + if (!strcmp(buf,"44")) { + //motorola + reset_gpio=(1<<5); + } + if (!strcmp(buf,"00")) { + //buffalo + reset_gpio=(1<<7); + } + if (!strcmp(buf,"45")) { + //wl-500g deluxe + reset_gpio=(1<<6); + } + } + + + sb_gpiocontrol(sbh,reset_gpio,reset_gpio); + sb_gpioouten(sbh,reset_gpio,0); + reset_polarity=!(sb_gpioin(sbh)&reset_gpio); + + diag_sysctl_header = register_sysctl_table(sys_diag, 0); + diag_change(); + + return 0; +} + +static void __exit diag_exit() +{ + unregister_sysctl_table(diag_sysctl_header); +} + +EXPORT_NO_SYMBOLS; +MODULE_AUTHOR("openwrt.org"); +MODULE_LICENSE("GPL"); + +module_init(diag_init); +module_exit(diag_exit); diff --git a/openwrt/target/linux/package/diag/ipkg/kmod-diag.control b/openwrt/target/linux/package/diag/ipkg/kmod-diag.control new file mode 100644 index 000000000..7a4e9ae11 --- /dev/null +++ b/openwrt/target/linux/package/diag/ipkg/kmod-diag.control @@ -0,0 +1,6 @@ +Package: kmod-diag +Priority: essential +Section: sys +Maintainer: OpenWrt Developer Team +Source: buildroot internal +Description: Driver for Router LEDs and Buttons