fix rootfs split partition renaming (fix by Eric L. Chen)
[openwrt.git] / target / linux /
2007-07-20 nbdfix rootfs split partition renaming (fix by Eric L...
2007-07-20 florianFixup the hcd driver, add a start/stop/reset/sw_reset...
2007-07-20 florianFix wget2nand with the host's patch-cmdline and the...
2007-07-20 floriancompress the kernel that resides on the nand memory
2007-07-20 juhosg[adm5120] fix switch_driver to avoid segfaults
2007-07-20 juhosg[adm5120] update trxsplit
2007-07-19 florianFix indentation for add_mtd_partitions (#2072)
2007-07-19 florianRemove tgz hacks
2007-07-19 nbdreally fix tgz images
2007-07-19 juhosgrestore Kconfig options of rootfs_split for 2.6.21.5
2007-07-19 florianSuppress promc.c.orig, fix the nand detection with...
2007-07-19 florianrevert 8059, via-rhine is built in the kernel
2007-07-19 juhosgrootfs_split fixes
2007-07-19 florianInclude kmod-via-rhine by default for rb532
2007-07-19 florianConvert the NAND driver to platform_driver, allow tgz...
2007-07-19 florianAdd wget2nand, this should allow netboot installation...
2007-07-19 florianReally add the LED driver :)
2007-07-19 nbddisable ipt_quota on linux 2.4 - iptables user space...
2007-07-19 florianPut the init flag in the structure
2007-07-19 florianrb532 has pci support and should build tgz images by...
2007-07-19 florianAllow the redboot supplied command line to be append...
2007-07-19 juhosgclean of the rootfs_split patch
2007-07-18 florianReplace hardcoded values with their correct definitions
2007-07-18 florianConvert the nand driver to a platform_device, should...
2007-07-18 florianFix the tgz image build
2007-07-18 florianThe RB1xx profile should only provide tgz image and...
2007-07-18 florianAdd a USES_TGZ config.in variable, so that RB1xx profil...
2007-07-18 florianAdd an ar7 tnetd7200 fix by DerAgo, thanks !
2007-07-18 nbdadd missing config symbols
2007-07-18 florianResync x86_64 kernel config and make uml build ext2...
2007-07-18 florianUpgrade uml to 2.6.22.1
2007-07-18 florianLoad the appropriate MTD driver if we were booted from...
2007-07-18 nbddisable a few things that are not packaged yet
2007-07-18 nbddynamically enable/disable kernel config options for...
2007-07-17 juhosg[adm5120] restore support for Infineon's EASY 5120...
2007-07-17 florianPreliminary support to bcm6358
2007-07-17 kalozbump brcm63xx to 2.6.22.1, too
2007-07-17 florianAdd diagnostic stuff to rb500
2007-07-17 florianUpgrade rb500 to .22.1, add the LED driver from #986
2007-07-17 florianAdd ipt_random module
2007-07-17 florianAdm5120 NAPI polling support and fixes by Thomas Langer...
2007-07-17 florianFix warnings
2007-07-16 nbdbetter support for handling various jffs2 eraseblock...
2007-07-16 florianRemove the bogus pciutils dependency
2007-07-16 nbdfix ipp2p
2007-07-16 nbdadd kernel_oldconfig target
2007-07-16 rwhitbyixp4xx/fsg3: Enabled the Winbond W83782D sensor for...
2007-07-16 nbddisable __must_check by default
2007-07-16 rwhitbySet ixp4xx network config to static 192.168.1.1
2007-07-16 rwhitbyixp4xx/NSLU2: Added devio to the NSLU2 profile (require...
2007-07-16 rwhitbyixp4xx-2.6: Removed the network config override file...
2007-07-16 rwhitbyixp4xx-2.6: Remove the inadequate netconfig script...
2007-07-16 rwhitbyixp4xx-2.6/config: Removed the disabling of swap so...
2007-07-15 juhosg[adm5120] fix of the board specific initialization...
2007-07-15 juhosg[adm5120] refresh patches for 2.6.22.1 using quilt
2007-07-15 juhosg[adm5120] lzma-loader improvements
2007-07-13 rwhitbyixp4xx-2.6/config: Removed the PPP config override...
2007-07-13 juhosg[adm5120] flash driver shows the correct chip size...
2007-07-13 florianFix the section mismatch on the serial driver (#2076...
2007-07-13 kalozsync avr32 to 2.6.22.atmel.2
2007-07-12 nbdfix layer7 for 2.6.21
2007-07-12 kalozupgrade AVR32 to 2.6.22.1
2007-07-12 kalozpci_module_init() is deprecated for a long time - this...
2007-07-12 kalozupgrade atheros targets to 2.6.22.1
2007-07-11 juhosg[adm5120] fix detection of admboot based boards
2007-07-11 juhosg[adm5120] remove hardware accelerated byte swapping...
2007-07-11 rwhitbyixp4xx: Add RTC driver for FSG-3
2007-07-11 rwhitbyixp4xx/fsg3: Compile needed drivers into the kernel...
2007-07-11 rwhitbyixp4xx: Initial profile for the Freecom FSG-3
2007-07-11 rwhitbyixp4xx: Add initial support for the Freecom FSG-3
2007-07-11 rwhitbyixp4xx: Update from 2.6.21.5 to 2.6.21.6
2007-07-11 kalozmostly cosmetic sync with the mainline bubinga code
2007-07-11 juhosg[adm5120] refactor kernel code (part 1), mark it as...
2007-07-11 mbmbump to 2.6.22.1
2007-07-11 nbdadd ar7 2.6.22 patches by matteo (work in progress...
2007-07-10 nbdfix a typo in the imq module (patch from #2005)
2007-07-10 juhosg[adm5120] fix errors in image generation Makefiles...
2007-07-09 juhosgdisable image generation for boards which we still...
2007-07-09 florianau1000 now runs .22, mtx-1 watchdog is mainline and...
2007-07-09 nbdfix the cpu_wait patch for 2.6.22
2007-07-09 nbd2.6.22 is released :)
2007-07-09 nbdremove ARCH:=i686 from s100 profile - the build system...
2007-07-08 blogicsome updates for s100
2007-07-08 blogicadded i686 support and profile for t-vision s100
2007-07-04 nbdadd failsafe support for atheros-2.6 (#1501) - only...
2007-07-04 nbdrefactor atheros system code - also add support for...
2007-07-04 nbdmore fixes for the crazy cpu cache issues on brcm47xx...
2007-07-03 juhosg[adm5120] more generic handling of Macronix flash chips...
2007-07-02 nbdfix a glitch in the status output of the non-verbose...
2007-07-02 nbdnuke magicbox-2.6 2.6.21 patches - 2.6.22-rc is stable...
2007-07-02 nbdupdate imq patches (fixes #2009)
2007-07-02 nbdupgrade layer7 to the latest version and add fixes...
2007-07-01 nozMove SSB out of brcm47xx target into generic-2.6 target
2007-07-01 nbdadd gateway 7001 support patch from #1918
2007-07-01 nbdnuke broadcom 2.6.21 patches - 2.6.22-rc6 is more stabl...
2007-07-01 florianpatch-cmdline is now gone
2007-07-01 florianRemove patch-cmdline from the packages and move it...
2007-07-01 juhosg[adm5120] rewrite of memory detection code, should...
2007-06-30 nozBring mach-bcm947xx/gpio.h into line with new SSB code...
2007-06-30 nbdmove parts of the failsafe code to the generic base...
next
This page took 0.062773 seconds and 7 git commands to generate.