[kernel] switch to 2.6.27.28
[openwrt.git] / target / linux / brcm63xx /
2009-07-27 florian[kernel] switch to 2.6.27.28
2009-07-25 florian[brcm63xx] fix malformed patch
2009-07-24 florian[brcm63xx] bcm6345 does not seem to handle r4k_wait...
2009-07-24 florian[kernel] use 2.6.27.7
2009-07-21 florian[brcm63xx] fix typos introduced in 16942
2009-07-21 florian[brcm63xx] make the ethernet driver compile with newer...
2009-07-20 florian[brcm63xx] request irq with the platform driver name...
2009-07-18 florian[brcm63xx] we are using the default-on trigger for...
2009-07-18 florian[brcm63xx] register GPIO-connected LEDs for known boards
2009-07-17 florian[brcm63xx] mask the USB_EHCI_ROOT_HUB_TT symbol since...
2009-07-17 florian[brcm63xx] fix comment only valid for bcm6345
2009-07-12 florian[brcm63xx] resync kernel configuration and enable kexec
2009-07-06 florian[brcm63xx] add bcm47xx lzma initramfs patch which is...
2009-07-06 florian[brcm63xx] add a profile with no Wi-Fi drivers enabled...
2009-07-03 florian[kernel] update to latest 2.6.27.26 stable kernel
2009-07-01 florian[brcm63xx] add the infrastructure to use a MPI/GPIO...
2009-07-01 florian[brcm63xx] fixes for the bcm6338 clocks, thanks Maxime
2009-06-30 florian[brcm63xx] a couple of more fixes to get 6345 booting...
2009-06-28 florian[brcm63xx] shared DMA zone is twice smaller on 6338
2009-06-28 florian[brcm63xx] turn on size optimization for bcm63xx
2009-06-28 florian[brcm63xx] off-by-one gpio numbers for bcm6338
2009-06-27 florian[brcm63xx] bcm6338 can support PCI since it has MPI
2009-06-27 florian[brcm63xx] more fixes for bcm6338, no need not to preve...
2009-06-27 florian[brcm63xx] fix the flash address comment and register...
2009-06-27 florian[brcm63xx] fix a stupid typo preventing the board from...
2009-06-27 florian[brcm63xx] prevent bcm6338 and bcm6345 from crashing...
2009-06-27 florian[brcm63xx] only register fallback sprom and enable...
2009-06-27 florian[brcm63xx] do not bloat the kernel with experimental...
2009-06-27 florian[brcm63xx] more missing register definitions for bcm6338
2009-06-26 florian[brcm63xx] more bcm6338 and bcm6345 related fixes
2009-06-26 florian[brcm63xx] define bcm6338 SDRAM base register and make...
2009-06-26 florian[brcm63xx] generate images for the bcm6338w
2009-06-26 florian[brcm63xx] add board definitions for the bcm6338w
2009-06-18 florian[brcm63xx] add imagetag support for BT Voyager 2500V...
2009-06-17 florian[brcm63xx] generate experimental images for bcm6338...
2009-06-17 florian[kernel] use 2.6.27.5
2009-06-15 kalozuse the same i/o schedulers for all targets
2009-06-10 florian[brcm63xx] use build system REVISION variable (#5317)
2009-06-10 florianThe attached patch adds building of firmware
2009-06-09 florian[brcm63xx] cleanup the watchdog driver a bit
2009-06-09 florian[brcm63xx] fix the watchdog driver and enable it by...
2009-06-09 florian[brcm63xx] rework imagetag firmware generator and MTD...
2009-06-08 florian[brcm63xx] remove this line which got accidentaly succe...
2009-06-04 florian[brcm63xx] fix ethernet driver removal
2009-06-04 florian[brcm63xx] fix pcmcia device removal
2009-06-04 florian[brcm63xx] add missing null entry in pcmcia driver
2009-06-04 florian[brcm63xx] request gpio pins and set direction correctl...
2009-06-04 florian[brcm63xx] be SMP safe even with gpiolib
2009-06-04 florian[brcm63xx] cache gpio values in gpio_set
2009-06-04 florian[brcm63xx] use the correct number of GPIOs for bcm6358
2009-06-04 florian[brcm63xx] register gpiochip earlier, allowing gpio...
2009-06-03 florian[brcm63xx] merger mtu/802.1q related fixes:
2009-06-01 florian[brcm63xx] backport an upstream fix: We're not disablin...
2009-05-29 florian[brcm63xx] include wpa-supplicant iw in the default...
2009-05-26 florian[brcm63xx] also include the SPI driver in the gw6x00...
2009-05-26 florian[brcm63xx] include kmod-usb-storage and kmod-ipt-nathel...
2009-05-25 florian[brcm63xx] add the Tecom GW6x00 (6000 and 6200) board...
2009-05-20 florian[kernel] update to new stable 2.6.27.24
2009-05-19 florian[kernel] disable CONFIG_SSB_BLOCKIO by default until...
2009-05-18 kalozeven more config file cleanup
2009-05-18 florian[brcm63xx] add missing SSB_BLOCKIO to prevent build...
2009-05-17 florian[brcm63xx] add support for sysupgrade (#5117)
2009-05-15 kalozconfig cleanups
2009-05-15 kalozcardbus != pcmcia -- disable it in b43
2009-05-15 florian[brcm63xx] add missing configuration symbol
2009-05-14 kalozsome additional config file cleanup..
2009-05-14 kalozunify congestion control options
2009-05-14 kalozmake kernels use /etc/preinit by default
2009-05-07 florian[brcm63xx] also supports pcmcia
2009-05-04 kalozsome more kernel config cleanup.. last for today :)
2009-05-04 kalozmore cleanup
2009-05-04 kalozcleanup MTD option handling
2009-05-04 kalozmove MFD stuff to the generic kernel configs
2009-05-04 kalozrefresh patches
2009-05-03 kalozupgrade to newest stable kernel versions
2009-04-30 florian[brcm63xx] now that we register gpiodev, also include...
2009-04-30 florian[brmc63xx] register gpiodev
2009-04-19 florian[brcm63xx] fix redundant driver name printing in probe...
2009-04-19 florian[brcm63xx] make images that can be flashed using the...
2009-04-17 nbdget rid of $Id$ - it has never helped us and it has...
2009-04-12 florian[kernel] do not override CONFIG_CONFIGFS_FS in a few...
2009-04-08 florian[brcm63xx] some more fixes to the SPI controller driver
2009-04-07 florian[brcm63x] imagetag's -k argument is expected to be...
2009-03-24 florian[brcm63xx] override CONFIG_USB_EHCI_ROOT_HUB_TT since...
2009-03-24 hauke[kernel] refresh patches
2009-03-24 hauke[kernel] update to kernel version 2.6.27.21
2009-03-21 florian[brcm63xx] enable all blocks on 6338 and uart clock...
2009-03-20 florian[brcm63xx] add support for bcm6345 SoC, needs testing
2009-03-17 florian[brcm63xx] fix SPI register switch and prepare for...
2009-03-16 florian[brcm63xx] add the CFE offset command line option to...
2009-03-12 florian[brcm63xx] add support for AGPF-S0 (Pirelli Alice Gate...
2009-03-11 florian[brcm63xx] do not duplicate fifo_size, since RX and...
2009-03-10 florian[brcm63xx] make SPI work in full-duplex mode by default
2009-03-09 florian[brcm63xx] include kmod-switch in the default images
2009-03-08 florian[brcm63xx] package the bcm63xx-spi driver
2009-03-08 florian[brcm63xx] add bcm63xx_spi based on reading shared...
2009-03-08 florian[brcm63xx] fix SPI accessors
2009-03-08 florian[brcm63xx] fix typo for the bcm6338 spi IRQ, change...
2009-03-08 florian[brcm63xx] compile and register SPI controller device
2009-03-08 florian[brcm63xx] make bcm6358 consistend with the other board...
next
This page took 0.076013 seconds and 7 git commands to generate.