hauke [Fri, 23 Dec 2011 17:21:52 +0000 (17:21 +0000)]
brcm47xx: fix usb on more recent bcma based devices.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29605
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 23 Dec 2011 14:27:16 +0000 (14:27 +0000)]
ramips: initial support for Sitecom WL-351 v1 002
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.
Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.
With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.
The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated
But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29604
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 23 Dec 2011 14:27:10 +0000 (14:27 +0000)]
ramips: add support for the Senao/EnGenius ESR-9753 board
Signed-off-by: Artur Wronowski <arteqw@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29603
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 23 Dec 2011 14:27:05 +0000 (14:27 +0000)]
ramips: define firmware partition for Omnima MiniEMBWiFi
Patch-by: Ivan Ignjatic <ivan@omnima.co.uk>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29602
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Thu, 22 Dec 2011 08:45:13 +0000 (08:45 +0000)]
kernel: enable magic sysrq by default, it does not add much to the kernel image size, but is useful for debugging many kinds of hangs/crashes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29600
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Thu, 22 Dec 2011 05:43:53 +0000 (05:43 +0000)]
ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29598
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Wed, 21 Dec 2011 19:32:40 +0000 (19:32 +0000)]
ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H
Thanks netprince for reporting and testing.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29595
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 21 Dec 2011 01:27:48 +0000 (01:27 +0000)]
[ar71xx] the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29593
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Tue, 20 Dec 2011 17:25:15 +0000 (17:25 +0000)]
[package] base-files: add -b (--create-backup) option to sysupgrade, which generates a backup .tar.gz according to the user settings. This will also be reused by LuCI.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29587
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Tue, 20 Dec 2011 01:10:15 +0000 (01:10 +0000)]
[package] firewall:
- introduce per-section "option enabled" which defaults to "1" - useful to disable rules or zones without having to delete them
- annotate default traffic rules with names
- bump version
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29577
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Mon, 19 Dec 2011 23:55:20 +0000 (23:55 +0000)]
brcm47xx: remove patch starting adding brcm4716 to ssb
brcm4716 is supported by bcma now we do not need this patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29576
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Mon, 19 Dec 2011 23:39:13 +0000 (23:39 +0000)]
brcm47xx: add new usb driver for bcma bus and replace ssb usb driver.
This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29575
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Mon, 19 Dec 2011 23:33:03 +0000 (23:33 +0000)]
kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29574
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Mon, 19 Dec 2011 23:26:15 +0000 (23:26 +0000)]
brcm47xx: remove support for kernel 2.6.39
There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29573
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Mon, 19 Dec 2011 23:23:34 +0000 (23:23 +0000)]
mac80211: deactivate mac80211 tracing
Activating tracing on kernel <= 2.6.32 causes build errors.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29572
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 19 Dec 2011 15:51:20 +0000 (15:51 +0000)]
ath9k: fix another tx locking issue
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29570
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 19 Dec 2011 10:27:28 +0000 (10:27 +0000)]
mac80211: fix powersave setting
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29569
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 19 Dec 2011 09:04:15 +0000 (09:04 +0000)]
ar71xx: add missing wireless led changes for wzr-hp-g300nh2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29568
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 18 Dec 2011 22:20:17 +0000 (22:20 +0000)]
ar71xx: add support for the wzr-hp-g300nh2
Signed-off-by: Mark Deneen <mdeneen@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29567
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 18 Dec 2011 22:19:21 +0000 (22:19 +0000)]
mac80211: apply txpower after bringing up the interface, should fix #10113
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29566
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 18 Dec 2011 22:18:46 +0000 (22:18 +0000)]
mac80211: use iw instead of iwconfig to disable powersave
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29565
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 18 Dec 2011 22:17:34 +0000 (22:17 +0000)]
ath9k: fix some issues in the btcoex disable patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29564
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 17 Dec 2011 18:49:55 +0000 (18:49 +0000)]
ar71xx: use 64kraw template on more TP-Link boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29561
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 17 Dec 2011 14:28:25 +0000 (14:28 +0000)]
ath9k: fix a locking issue in the tx path
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29560
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 17 Dec 2011 14:28:20 +0000 (14:28 +0000)]
hostapd: add missing check for wds stations
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29559
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 16 Dec 2011 23:41:44 +0000 (23:41 +0000)]
ath9k: fix a crash in led init
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29558
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:25:38 +0000 (22:25 +0000)]
ar71xx: connect GMAC0 to the internal switch on DB120
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29557
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:25:36 +0000 (22:25 +0000)]
ar71xx: add defines for the AR934X GMAC interface
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29556
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:25:35 +0000 (22:25 +0000)]
ar71xx: fix GMAC1 interface speed on the DB120 board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29555
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:25:32 +0000 (22:25 +0000)]
ar71xx: ag71xx: fix switch port setup for AR934X
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29554
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:25:30 +0000 (22:25 +0000)]
ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29553
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:25:29 +0000 (22:25 +0000)]
ar71xx: ag71xx: setup switch interface mode on AR934X
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29552
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:25:28 +0000 (22:25 +0000)]
ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29551
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:25:22 +0000 (22:25 +0000)]
ar71xx: allow to attach the internal switch for AR934x
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29550
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:25:11 +0000 (22:25 +0000)]
ar71xx: introduce ar71xx_switch_data
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29549
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:03:48 +0000 (22:03 +0000)]
ar71xx: build images for TL-WR741N/ND v2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29548
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:03:46 +0000 (22:03 +0000)]
ar71x: use raw squashfs images for TP-Link boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29547
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:03:45 +0000 (22:03 +0000)]
ar71xx: create a template for using unpadded squashfs images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29546
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:03:44 +0000 (22:03 +0000)]
ar71xx: put squash image right after the kernel on TP-Link boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29545
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:03:42 +0000 (22:03 +0000)]
firmware-utils/mktplinkfw: add ability to put jffs2 eof marker into the image
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29544
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:03:40 +0000 (22:03 +0000)]
ar71xx: tplinkpart: allow to detect JFFS2 as well
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29543
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 13:25:23 +0000 (13:25 +0000)]
ar71xx: ag71xx: check PHY IDs before accessing the switch registers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29541
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 13:25:21 +0000 (13:25 +0000)]
ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724x
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29540
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 13:25:20 +0000 (13:25 +0000)]
ar71xx: ag71xx: nuke ar7240sw_init
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29539
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 13:25:18 +0000 (13:25 +0000)]
ar71xx: fix mac addresses on jjPlus devices
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29538
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Wed, 14 Dec 2011 21:03:52 +0000 (21:03 +0000)]
ath9k: fix a locking issue
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29537
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 14 Dec 2011 20:54:11 +0000 (20:54 +0000)]
ar71xx: build image for the Hornet-UB board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29536
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 14 Dec 2011 20:54:10 +0000 (20:54 +0000)]
ar71xx: add support for ALFA Network's Hornet-UB board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29535
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 14 Dec 2011 20:54:07 +0000 (20:54 +0000)]
ar71xx: add GPIO function bit defines for AR933X
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29534
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 14 Dec 2011 20:51:26 +0000 (20:51 +0000)]
ramips: add support for Omnima MiniEMBWiFi board
This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.
Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29533
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Wed, 14 Dec 2011 20:47:24 +0000 (20:47 +0000)]
ar71xx: fix gpio count for ar7241/ar7242
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29532
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Wed, 14 Dec 2011 20:21:42 +0000 (20:21 +0000)]
ar71xx: register extra leds behind the wireless mac on wzr-hp-g450h
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29531
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Wed, 14 Dec 2011 20:21:36 +0000 (20:21 +0000)]
ath9k: add support for registering extra leds connected to the wmac gpio lines
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29530
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 13 Dec 2011 20:41:24 +0000 (20:41 +0000)]
ar71xx: get rid of squashfs-4k images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29522
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 13 Dec 2011 20:41:22 +0000 (20:41 +0000)]
generic: disable 'small sector' erase in m25p80 driver
This fixes the issues with the jffs2 images on various boards. Using
JFFS2 on devices with 4KiB erase sectors is not safe:
http://lists.infradead.org/pipermail/linux-mtd/2011-June/036591.html
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29521
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 13 Dec 2011 15:34:08 +0000 (15:34 +0000)]
image: increase squashfs block size - visibly reduces image size in many cases
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29519
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Tue, 13 Dec 2011 15:29:45 +0000 (15:29 +0000)]
[package] kernel: rename kmod-switch-rtl8366_smi to kmod-switch-rtl8366-smi to avoid underscores in package names
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29518
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 13 Dec 2011 15:14:59 +0000 (15:14 +0000)]
kernel: move linux/ath9k_platform.h to generic files so that it can be reused from other targets
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29516
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 13 Dec 2011 15:00:43 +0000 (15:00 +0000)]
ar71xx: fix wireless led on wzr-hp-g450h
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29515
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 13 Dec 2011 14:59:43 +0000 (14:59 +0000)]
ar71xx: enable AR9341 support at setup.c
Patch-by: dyq <729650915@qq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29514
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 13 Dec 2011 14:59:40 +0000 (14:59 +0000)]
ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2
The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The
WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case.
The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or
switch ports 2-4. The stock firmware uses a single LED (in the 5GHz
position) to indicate the status of both radios, and a single LED (in the
switch port 1 position) to indicate the status of all LAN ports. The
"missing" LEDs are present on the board, and easily shine through the
case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs.
I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume
that this is sufficient to build a fully-functional image.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29513
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 13 Dec 2011 13:51:05 +0000 (13:51 +0000)]
busybox: disable "mesg" by default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29510
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 13 Dec 2011 13:33:44 +0000 (13:33 +0000)]
ar71xx: add gpios and usb for wzr-hp-g450h
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29509
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Mon, 12 Dec 2011 17:26:13 +0000 (17:26 +0000)]
[package] hostapd: support optional argument for the -v switch of hostapd and wpa_supplicant to query build features, e.g. hostapd -veap to test whether 802.11i support is compiled in
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29507
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 12 Dec 2011 14:42:35 +0000 (14:42 +0000)]
mac80211: make mesh support optional
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29506
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 11 Dec 2011 15:52:47 +0000 (15:52 +0000)]
ar71xx: use RedBoot parser on PB44
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29501
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nico [Sat, 10 Dec 2011 22:02:50 +0000 (22:02 +0000)]
include/package-ipkg.mk: fix typo in r29449
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29497
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 10 Dec 2011 21:17:19 +0000 (21:17 +0000)]
mac80211: merge another upstream aggregation fix
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29496
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 10 Dec 2011 21:17:12 +0000 (21:17 +0000)]
ath9k: disable bluetooth coexistence support to reduce module size
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29495
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 10 Dec 2011 21:17:07 +0000 (21:17 +0000)]
ath9k: improve handling of blockackreq (should improve aggregation behavior under tough wifi conditions with lots of retransmission)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29494
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 10 Dec 2011 21:16:58 +0000 (21:16 +0000)]
mac80211: merge an upstream fix for an aggregation related race condition
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29493
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Fri, 9 Dec 2011 07:52:10 +0000 (07:52 +0000)]
[atheros] convert to gpiolib
Signed-off-by: karlp@tweak.net.au
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29486
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Thu, 8 Dec 2011 22:53:13 +0000 (22:53 +0000)]
mac80211: add support for firmware 666.2 for b43 devices
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29485
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 8 Dec 2011 16:49:45 +0000 (16:49 +0000)]
[package] librpc: do not build if external or native toolchains are used
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29484
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 7 Dec 2011 06:55:50 +0000 (06:55 +0000)]
ar71xx: fix WNDR3x00 factory image generation
Factory images for WNDR3700v2 and WNDR3800 should contain these model IDs
for the device: field in their DNI tags, not WNDR3700.
This regressed in r29434, which redid WNDR3x00 model detection. The sixth
parameter to Image/Build/Netgear is only used as the -B argument to
mkdniimg, which is used to set the device: field. In r29434, this was
erroneously changed to be WNDR3700 for all models. The tools to flash
factory images (U-Boot's TFTP server and the factory software's upgrade
utility) may refuse to honor images with incorrect device: fields in their
DNI tags.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29473
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 7 Dec 2011 06:55:39 +0000 (06:55 +0000)]
ar71xx: fix WNDR3x00 model detection
Detect the model name for /tmp/sysinfo/model based on 10 bytes at offset
56 in the art (caldata) mtd partition.
r29434 redid WNDR3x00 model detection, attempting to distinguish between
WNDR3700v2 and WNDR3800 by checking MemTotal in /proc/meminfo. However, it
contained a bug: it put the awk inside a $(...), with the result that all
WNDR3700v2 and WNDR3800 models would be reported as WNDR3800. This patch
checks the model name stored in the art partition, as is done by U-Boot
shipping on the WNDR3800. It has the likely advantage of working with
future models based on the WNDR3700 board. It also will not mis-detect
units on which people install more memory.
I have tested this patch on WNDR3700 (v1), WNDR3700v2, and WNDR3800.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29472
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 6 Dec 2011 20:06:08 +0000 (20:06 +0000)]
ramips: fix mac addresses on the DIR-300/600 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29471
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Tue, 6 Dec 2011 19:50:30 +0000 (19:50 +0000)]
linux: update 3.1 to 3.1.4
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29470
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Tue, 6 Dec 2011 19:50:25 +0000 (19:50 +0000)]
linux: update 3.0 to 3.0.12
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29469
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 6 Dec 2011 16:26:44 +0000 (16:26 +0000)]
ar71xx: create firmware image for the TL-WR740N/ND v4 boards
Based on a patch by Cristian Deluxe <djcristiandeluxe@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29468
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 6 Dec 2011 16:26:43 +0000 (16:26 +0000)]
ar71xx: use hw_id, hw_rev and flash_layout with mktplinkfw
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29467
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 6 Dec 2011 16:26:41 +0000 (16:26 +0000)]
tools/mktplinkfw: allow to specify hw_id, hw_rev and flash_layout
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29466
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 6 Dec 2011 16:00:00 +0000 (16:00 +0000)]
ubus: update to the latest version
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29465
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 6 Dec 2011 15:59:53 +0000 (15:59 +0000)]
libubox: update to latest version, fix some endian issues
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29464
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 6 Dec 2011 13:53:21 +0000 (13:53 +0000)]
ar71xx: fix TL-MR3x20 profile names in image/Makefile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29463
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Tue, 6 Dec 2011 13:24:47 +0000 (13:24 +0000)]
[package] iwinfo: support nl80211 hardware identification against radioX pseudo interfaces, useful if radio is not up yet
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29462
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 6 Dec 2011 10:29:25 +0000 (10:29 +0000)]
ar71xx: cleanup TP-Link profiles
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29461
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 5 Dec 2011 22:12:16 +0000 (22:12 +0000)]
mac80211: merge some pending fixes, fixes skb leaks and some warnings
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29460
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 5 Dec 2011 21:11:01 +0000 (21:11 +0000)]
ar71xx: add TP-Link board detection
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29459
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 5 Dec 2011 21:10:58 +0000 (21:10 +0000)]
ar71xx: use correct mac on the lan interface on several TP-LINK devices
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29458
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 5 Dec 2011 21:10:55 +0000 (21:10 +0000)]
ar71xx: allow to pass negative offset values for ar71xx_init_mac
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29457
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 5 Dec 2011 18:21:15 +0000 (18:21 +0000)]
ar71xx: don't register PCI controller on AR934x if PCIE_RC bit is not set
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29456
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 5 Dec 2011 18:11:51 +0000 (18:11 +0000)]
ar71xx: verify hardware id of firmware images on TP-Link boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29455
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 5 Dec 2011 17:27:07 +0000 (17:27 +0000)]
ramips: set mac addresses for the NBG-419N
Based on a patch by Nerijus Baliunas <nerijus@users.sourceforge.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29454
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 5 Dec 2011 17:27:06 +0000 (17:27 +0000)]
ramips: set preinit interface mac on the hw550-3g board
Based on a patch by Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29453
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 5 Dec 2011 17:27:04 +0000 (17:27 +0000)]
ramips: use ramips_get_mac_* functions in the preinit script
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29452
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 5 Dec 2011 17:27:03 +0000 (17:27 +0000)]
ramips: move ramips_get_mac_* functions to lib/ramips.sh
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29451
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 5 Dec 2011 17:27:02 +0000 (17:27 +0000)]
ramips: add ramips_ prefix to get_mac_{binary,nvram} functions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29450
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 5 Dec 2011 17:27:00 +0000 (17:27 +0000)]
include/package-ipkg.mk: don't add vi backup files to packages
Also remove trailing whitespaces.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29449
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 5 Dec 2011 16:54:48 +0000 (16:54 +0000)]
ramips: fix network configuration setup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29448
3c298f89-4303-0410-b956-
a3cf2f4a3e73
This page took 0.065376 seconds and 4 git commands to generate.
projects / openwrt.git / log