jow [Wed, 4 Jan 2012 12:32:47 +0000 (12:32 +0000)]
[toolchain] disable UCLIBC_HAS_XLOCALE and UCLIB_HAS_GLIBC_DIGIT_GROUPING if BUILD_NLS is on (#10735)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29646
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 4 Jan 2012 02:52:54 +0000 (02:52 +0000)]
add CT target and TTL/HL match+target
This patch adds the CT target for conntrack (enables manipulation of
conntrack events and supercedes NOTRACK) as well as the TTL/HL target and
match.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29645
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 4 Jan 2012 00:29:29 +0000 (00:29 +0000)]
[netfilter] remove current RTSP support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29643
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Tue, 3 Jan 2012 23:08:15 +0000 (23:08 +0000)]
[generic] backport upstream commit
e1738bd9cecc5c867b0e2996470c1ff20f66ba79 to affected kernels (#9802)
commit
8efa88540635 (sch_sfq: avoid giving spurious NET_XMIT_CN signals)
forgot to call qdisc_tree_decrease_qlen() to signal upper levels that a
packet (from another flow) was dropped, leading to various problems.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29642
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 1 Jan 2012 19:30:29 +0000 (19:30 +0000)]
ar71xx: add profile and build factory image for the Hornet-UB board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29637
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 1 Jan 2012 19:30:28 +0000 (19:30 +0000)]
ar71xx: build images for the ALFA Network N2/N5 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29636
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 1 Jan 2012 19:30:25 +0000 (19:30 +0000)]
ar71xx: add support for the ALFA Network N2/N5 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29635
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Sun, 1 Jan 2012 16:17:10 +0000 (16:17 +0000)]
[package] iwinfo: factor txpower offset into info display output, recompile if driver selection changes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29634
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Sun, 1 Jan 2012 15:11:11 +0000 (15:11 +0000)]
[toolchain] if CONFIG_BUILD_NLS is selected, compile uClibc with locale support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29633
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 31 Dec 2011 15:02:46 +0000 (15:02 +0000)]
ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29631
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 31 Dec 2011 15:02:40 +0000 (15:02 +0000)]
ar71xx: enable SWCONFIG_LEDS
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29630
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 31 Dec 2011 15:02:35 +0000 (15:02 +0000)]
package/base-files: add support for the switch LED trigger
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29629
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 31 Dec 2011 15:02:32 +0000 (15:02 +0000)]
package/base-files: use case statement in led init script
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29628
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 31 Dec 2011 15:02:30 +0000 (15:02 +0000)]
kernel: swconfig: introduce a generic switch LED trigger
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29627
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 31 Dec 2011 15:02:26 +0000 (15:02 +0000)]
ar71xx: ag71xx: implement get_port_{link,stats} callbacks
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29626
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 31 Dec 2011 15:02:24 +0000 (15:02 +0000)]
kernel: swconfig: add get_port_{link,stats} callbacks
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29625
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 31 Dec 2011 13:54:11 +0000 (13:54 +0000)]
ar71xx: fix LEDs on the WRT400N
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29624
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 28 Dec 2011 08:43:43 +0000 (08:43 +0000)]
ramips: rt288x: add support for the Belkin
F5D8235-4 v1 board
Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29617
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 28 Dec 2011 08:43:36 +0000 (08:43 +0000)]
ramips: rt288x: change base address and window size of flash bank 0
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29616
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 28 Dec 2011 08:43:32 +0000 (08:43 +0000)]
ramips: rt305x: add support for the ALFA Networks W502U (R36) board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29615
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 27 Dec 2011 16:59:43 +0000 (16:59 +0000)]
ar71xx: enable sysupgrade support for airrouter
Works for me! ;-)
Patch-by: Russell Senior <russell@personaltelco.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29614
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 27 Dec 2011 16:57:01 +0000 (16:57 +0000)]
ar71xx: fix sysupgrade on PB42/PB44 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29613
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 27 Dec 2011 16:56:30 +0000 (16:56 +0000)]
ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29612
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Sun, 25 Dec 2011 13:59:17 +0000 (13:59 +0000)]
[package] add usbreset - a small simple utility to send port rests to selected usb devices (#10394)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29611
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Sun, 25 Dec 2011 13:33:18 +0000 (13:33 +0000)]
[generic] add missing config symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29610
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Sun, 25 Dec 2011 13:32:53 +0000 (13:32 +0000)]
[netfilter] package CT target
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29609
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 23 Dec 2011 19:24:38 +0000 (19:24 +0000)]
mac80211: clean up init, remove some redundant checks, fix tx power init (#10113)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29606
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Fri, 23 Dec 2011 17:21:52 +0000 (17:21 +0000)]
brcm47xx: fix usb on more recent bcma based devices.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29605
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 23 Dec 2011 14:27:16 +0000 (14:27 +0000)]
ramips: initial support for Sitecom WL-351 v1 002
This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.
Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.
With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.
The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated
But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29604
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 23 Dec 2011 14:27:10 +0000 (14:27 +0000)]
ramips: add support for the Senao/EnGenius ESR-9753 board
Signed-off-by: Artur Wronowski <arteqw@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29603
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 23 Dec 2011 14:27:05 +0000 (14:27 +0000)]
ramips: define firmware partition for Omnima MiniEMBWiFi
Patch-by: Ivan Ignjatic <ivan@omnima.co.uk>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29602
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Thu, 22 Dec 2011 08:45:13 +0000 (08:45 +0000)]
kernel: enable magic sysrq by default, it does not add much to the kernel image size, but is useful for debugging many kinds of hangs/crashes
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29600
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Thu, 22 Dec 2011 05:43:53 +0000 (05:43 +0000)]
ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29598
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Wed, 21 Dec 2011 19:32:40 +0000 (19:32 +0000)]
ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H
Thanks netprince for reporting and testing.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29595
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 21 Dec 2011 01:27:48 +0000 (01:27 +0000)]
[ar71xx] the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29593
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Tue, 20 Dec 2011 17:25:15 +0000 (17:25 +0000)]
[package] base-files: add -b (--create-backup) option to sysupgrade, which generates a backup .tar.gz according to the user settings. This will also be reused by LuCI.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29587
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Tue, 20 Dec 2011 01:10:15 +0000 (01:10 +0000)]
[package] firewall:
- introduce per-section "option enabled" which defaults to "1" - useful to disable rules or zones without having to delete them
- annotate default traffic rules with names
- bump version
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29577
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Mon, 19 Dec 2011 23:55:20 +0000 (23:55 +0000)]
brcm47xx: remove patch starting adding brcm4716 to ssb
brcm4716 is supported by bcma now we do not need this patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29576
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Mon, 19 Dec 2011 23:39:13 +0000 (23:39 +0000)]
brcm47xx: add new usb driver for bcma bus and replace ssb usb driver.
This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29575
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Mon, 19 Dec 2011 23:33:03 +0000 (23:33 +0000)]
kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29574
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Mon, 19 Dec 2011 23:26:15 +0000 (23:26 +0000)]
brcm47xx: remove support for kernel 2.6.39
There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29573
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Mon, 19 Dec 2011 23:23:34 +0000 (23:23 +0000)]
mac80211: deactivate mac80211 tracing
Activating tracing on kernel <= 2.6.32 causes build errors.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29572
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 19 Dec 2011 15:51:20 +0000 (15:51 +0000)]
ath9k: fix another tx locking issue
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29570
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 19 Dec 2011 10:27:28 +0000 (10:27 +0000)]
mac80211: fix powersave setting
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29569
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 19 Dec 2011 09:04:15 +0000 (09:04 +0000)]
ar71xx: add missing wireless led changes for wzr-hp-g300nh2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29568
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 18 Dec 2011 22:20:17 +0000 (22:20 +0000)]
ar71xx: add support for the wzr-hp-g300nh2
Signed-off-by: Mark Deneen <mdeneen@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29567
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 18 Dec 2011 22:19:21 +0000 (22:19 +0000)]
mac80211: apply txpower after bringing up the interface, should fix #10113
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29566
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 18 Dec 2011 22:18:46 +0000 (22:18 +0000)]
mac80211: use iw instead of iwconfig to disable powersave
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29565
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 18 Dec 2011 22:17:34 +0000 (22:17 +0000)]
ath9k: fix some issues in the btcoex disable patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29564
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 17 Dec 2011 18:49:55 +0000 (18:49 +0000)]
ar71xx: use 64kraw template on more TP-Link boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29561
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 17 Dec 2011 14:28:25 +0000 (14:28 +0000)]
ath9k: fix a locking issue in the tx path
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29560
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 17 Dec 2011 14:28:20 +0000 (14:28 +0000)]
hostapd: add missing check for wds stations
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29559
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 16 Dec 2011 23:41:44 +0000 (23:41 +0000)]
ath9k: fix a crash in led init
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29558
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:25:38 +0000 (22:25 +0000)]
ar71xx: connect GMAC0 to the internal switch on DB120
Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29557
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:25:36 +0000 (22:25 +0000)]
ar71xx: add defines for the AR934X GMAC interface
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29556
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:25:35 +0000 (22:25 +0000)]
ar71xx: fix GMAC1 interface speed on the DB120 board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29555
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:25:32 +0000 (22:25 +0000)]
ar71xx: ag71xx: fix switch port setup for AR934X
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29554
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:25:30 +0000 (22:25 +0000)]
ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29553
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:25:29 +0000 (22:25 +0000)]
ar71xx: ag71xx: setup switch interface mode on AR934X
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29552
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:25:28 +0000 (22:25 +0000)]
ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29551
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:25:22 +0000 (22:25 +0000)]
ar71xx: allow to attach the internal switch for AR934x
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29550
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:25:11 +0000 (22:25 +0000)]
ar71xx: introduce ar71xx_switch_data
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29549
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:03:48 +0000 (22:03 +0000)]
ar71xx: build images for TL-WR741N/ND v2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29548
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:03:46 +0000 (22:03 +0000)]
ar71x: use raw squashfs images for TP-Link boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29547
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:03:45 +0000 (22:03 +0000)]
ar71xx: create a template for using unpadded squashfs images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29546
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:03:44 +0000 (22:03 +0000)]
ar71xx: put squash image right after the kernel on TP-Link boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29545
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:03:42 +0000 (22:03 +0000)]
firmware-utils/mktplinkfw: add ability to put jffs2 eof marker into the image
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29544
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 22:03:40 +0000 (22:03 +0000)]
ar71xx: tplinkpart: allow to detect JFFS2 as well
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29543
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 13:25:23 +0000 (13:25 +0000)]
ar71xx: ag71xx: check PHY IDs before accessing the switch registers
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29541
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 13:25:21 +0000 (13:25 +0000)]
ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724x
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29540
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 13:25:20 +0000 (13:25 +0000)]
ar71xx: ag71xx: nuke ar7240sw_init
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29539
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 15 Dec 2011 13:25:18 +0000 (13:25 +0000)]
ar71xx: fix mac addresses on jjPlus devices
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29538
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Wed, 14 Dec 2011 21:03:52 +0000 (21:03 +0000)]
ath9k: fix a locking issue
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29537
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 14 Dec 2011 20:54:11 +0000 (20:54 +0000)]
ar71xx: build image for the Hornet-UB board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29536
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 14 Dec 2011 20:54:10 +0000 (20:54 +0000)]
ar71xx: add support for ALFA Network's Hornet-UB board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29535
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 14 Dec 2011 20:54:07 +0000 (20:54 +0000)]
ar71xx: add GPIO function bit defines for AR933X
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29534
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 14 Dec 2011 20:51:26 +0000 (20:51 +0000)]
ramips: add support for Omnima MiniEMBWiFi board
This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.
Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29533
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Wed, 14 Dec 2011 20:47:24 +0000 (20:47 +0000)]
ar71xx: fix gpio count for ar7241/ar7242
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29532
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Wed, 14 Dec 2011 20:21:42 +0000 (20:21 +0000)]
ar71xx: register extra leds behind the wireless mac on wzr-hp-g450h
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29531
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Wed, 14 Dec 2011 20:21:36 +0000 (20:21 +0000)]
ath9k: add support for registering extra leds connected to the wmac gpio lines
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29530
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 13 Dec 2011 20:41:24 +0000 (20:41 +0000)]
ar71xx: get rid of squashfs-4k images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29522
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 13 Dec 2011 20:41:22 +0000 (20:41 +0000)]
generic: disable 'small sector' erase in m25p80 driver
This fixes the issues with the jffs2 images on various boards. Using
JFFS2 on devices with 4KiB erase sectors is not safe:
http://lists.infradead.org/pipermail/linux-mtd/2011-June/036591.html
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29521
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 13 Dec 2011 15:34:08 +0000 (15:34 +0000)]
image: increase squashfs block size - visibly reduces image size in many cases
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29519
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Tue, 13 Dec 2011 15:29:45 +0000 (15:29 +0000)]
[package] kernel: rename kmod-switch-rtl8366_smi to kmod-switch-rtl8366-smi to avoid underscores in package names
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29518
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 13 Dec 2011 15:14:59 +0000 (15:14 +0000)]
kernel: move linux/ath9k_platform.h to generic files so that it can be reused from other targets
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29516
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 13 Dec 2011 15:00:43 +0000 (15:00 +0000)]
ar71xx: fix wireless led on wzr-hp-g450h
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29515
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 13 Dec 2011 14:59:43 +0000 (14:59 +0000)]
ar71xx: enable AR9341 support at setup.c
Patch-by: dyq <729650915@qq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29514
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 13 Dec 2011 14:59:40 +0000 (14:59 +0000)]
ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2
The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The
WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case.
The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or
switch ports 2-4. The stock firmware uses a single LED (in the 5GHz
position) to indicate the status of both radios, and a single LED (in the
switch port 1 position) to indicate the status of all LAN ports. The
"missing" LEDs are present on the board, and easily shine through the
case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs.
I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume
that this is sufficient to build a fully-functional image.
Signed-off-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29513
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 13 Dec 2011 13:51:05 +0000 (13:51 +0000)]
busybox: disable "mesg" by default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29510
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Tue, 13 Dec 2011 13:33:44 +0000 (13:33 +0000)]
ar71xx: add gpios and usb for wzr-hp-g450h
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29509
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Mon, 12 Dec 2011 17:26:13 +0000 (17:26 +0000)]
[package] hostapd: support optional argument for the -v switch of hostapd and wpa_supplicant to query build features, e.g. hostapd -veap to test whether 802.11i support is compiled in
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29507
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 12 Dec 2011 14:42:35 +0000 (14:42 +0000)]
mac80211: make mesh support optional
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29506
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 11 Dec 2011 15:52:47 +0000 (15:52 +0000)]
ar71xx: use RedBoot parser on PB44
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29501
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nico [Sat, 10 Dec 2011 22:02:50 +0000 (22:02 +0000)]
include/package-ipkg.mk: fix typo in r29449
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29497
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 10 Dec 2011 21:17:19 +0000 (21:17 +0000)]
mac80211: merge another upstream aggregation fix
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29496
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 10 Dec 2011 21:17:12 +0000 (21:17 +0000)]
ath9k: disable bluetooth coexistence support to reduce module size
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29495
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 10 Dec 2011 21:17:07 +0000 (21:17 +0000)]
ath9k: improve handling of blockackreq (should improve aggregation behavior under tough wifi conditions with lots of retransmission)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29494
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sat, 10 Dec 2011 21:16:58 +0000 (21:16 +0000)]
mac80211: merge an upstream fix for an aggregation related race condition
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29493
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Fri, 9 Dec 2011 07:52:10 +0000 (07:52 +0000)]
[atheros] convert to gpiolib
Signed-off-by: karlp@tweak.net.au
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29486
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Thu, 8 Dec 2011 22:53:13 +0000 (22:53 +0000)]
mac80211: add support for firmware 666.2 for b43 devices
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29485
3c298f89-4303-0410-b956-
a3cf2f4a3e73
This page took 0.065717 seconds and 4 git commands to generate.
projects / openwrt.git / log