juhosg [Sat, 18 Feb 2012 14:45:52 +0000 (14:45 +0000)]
ar71xx: fix image signature for UBNT-XM boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30626
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 17 Feb 2012 22:15:33 +0000 (22:15 +0000)]
ath5k: do not re-run AGC calibration periodically - fixes stability issues on AR2315 (#10574)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30624
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 17 Feb 2012 22:15:26 +0000 (22:15 +0000)]
ath5k: do not stop the hardware queues during PAPD calibration, speeds up calibration
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30623
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Fri, 17 Feb 2012 17:21:03 +0000 (17:21 +0000)]
generic/2.6.37: fix 'set but unused' build errors on MIPS
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30615
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 17 Feb 2012 16:55:08 +0000 (16:55 +0000)]
gcc: use .eh_frame sections for exception handling stack unwind - saves about 400 bytes on every executable or shared library
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30614
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 17 Feb 2012 16:55:01 +0000 (16:55 +0000)]
gcc: enable --with-headers for the final toolchain build
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30613
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 17 Feb 2012 15:54:57 +0000 (15:54 +0000)]
crda: remove unnecessary build dependency on mac80211
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30612
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Fri, 17 Feb 2012 15:54:53 +0000 (15:54 +0000)]
hostapd: remove unnecessary dependency on mac80211
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30611
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Fri, 17 Feb 2012 09:04:23 +0000 (09:04 +0000)]
[package] broadcom-diag: add missing brackets breakign the detection logic (#10836)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30610
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Fri, 17 Feb 2012 00:36:25 +0000 (00:36 +0000)]
[package] iwinfo: implement proper hardware detection for ar23xx SoC devices like the NanoStation 2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30605
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 16 Feb 2012 20:06:22 +0000 (20:06 +0000)]
ramips: extract eeprom for the built-in wlan module on the RT-N56U
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30604
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 16 Feb 2012 20:06:21 +0000 (20:06 +0000)]
ramips: rt3883: change eeprom file name
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30603
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Thu, 16 Feb 2012 19:24:34 +0000 (19:24 +0000)]
[scripts] env: colorize git output
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30602
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 16 Feb 2012 17:58:33 +0000 (17:58 +0000)]
[package] iwinfo: fix detection of Bullet M5, the PCI ID was wrong
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30591
3c298f89-4303-0410-b956-
a3cf2f4a3e73
acinonyx [Thu, 16 Feb 2012 17:54:07 +0000 (17:54 +0000)]
[x86] Disable by default padding of images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30590
3c298f89-4303-0410-b956-
a3cf2f4a3e73
acinonyx [Thu, 16 Feb 2012 17:54:04 +0000 (17:54 +0000)]
[x86] Allow gzipping of squashfs images with padded jffs2 partition
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30589
3c298f89-4303-0410-b956-
a3cf2f4a3e73
acinonyx [Thu, 16 Feb 2012 17:54:01 +0000 (17:54 +0000)]
[x86] GZip only ext4 and padded images
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30588
3c298f89-4303-0410-b956-
a3cf2f4a3e73
acinonyx [Thu, 16 Feb 2012 17:53:57 +0000 (17:53 +0000)]
[x86] Make gzipping of images configurable via menuconfig
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30587
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 16 Feb 2012 17:14:34 +0000 (17:14 +0000)]
package/mac80211: fix a possible NULL pointer dereference in rt2x00
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30586
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 16 Feb 2012 09:03:27 +0000 (09:03 +0000)]
ar71xx: remove duplicated define from the D-Link profile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30577
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 16 Feb 2012 08:17:54 +0000 (08:17 +0000)]
ramips: select HW_HAS_PCI on per-board basis
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30576
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 16 Feb 2012 08:17:53 +0000 (08:17 +0000)]
ramips: rt3883: remove a stray character from rt3883.h
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30575
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 16 Feb 2012 08:17:52 +0000 (08:17 +0000)]
ramips: rt288x: don't register the PCI controller on each board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30574
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 16 Feb 2012 08:17:50 +0000 (08:17 +0000)]
ramips: raeth: separate ring allocation and setup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30573
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Thu, 16 Feb 2012 07:51:44 +0000 (07:51 +0000)]
generic: add SND_PPC symbol
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30572
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cshore [Thu, 16 Feb 2012 07:45:28 +0000 (07:45 +0000)]
[ar71xx] Add Ubiquiti UniFi Profile; It's an AP without USB so don't include USB drivers by default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30571
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cshore [Thu, 16 Feb 2012 07:38:33 +0000 (07:38 +0000)]
[ar71xx] d-link: Add DIR-601 Profile Definition; It needs different factory images than DIR-600
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30570
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cshore [Thu, 16 Feb 2012 07:29:26 +0000 (07:29 +0000)]
[ar71xx] Fix partitions for Cameo-based boards; kernel 3.2 is bigger
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30569
3c298f89-4303-0410-b956-
a3cf2f4a3e73
cshore [Thu, 16 Feb 2012 07:24:45 +0000 (07:24 +0000)]
[ar71xx] image: For Cameo-based board fix adding mtd layout to kernel commandline)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30568
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 15 Feb 2012 23:37:47 +0000 (23:37 +0000)]
linux 3.2: missing generic symbols
These symbols are dependent on CONFIG_PCI being enabled.
Signed-off-by: Philip Prindeville <philipp@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30565
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 15 Feb 2012 23:34:24 +0000 (23:34 +0000)]
[package] kernel: fix KCONFIG depends of kmod-md modules
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30564
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 15 Feb 2012 21:19:02 +0000 (21:19 +0000)]
ramips: rt288x: fix PCI resource conflict
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30563
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Wed, 15 Feb 2012 21:13:21 +0000 (21:13 +0000)]
[ramips] correct PCI IO/Mem resource swapping
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30562
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Wed, 15 Feb 2012 21:13:11 +0000 (21:13 +0000)]
[ramips] add Ralink V11ST-FE board support
This board is equipped with:
- 4MB of NOR Flash
- 32MB of SDRAM
- IC+ IP175C switch
- one Mini-PCI slot
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30561
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Wed, 15 Feb 2012 19:19:12 +0000 (19:19 +0000)]
build: add -Wno-error=unused-but-set-variable to cflags for gcc 4.6 and newer to avoid stupid -Werror related package breakage
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30556
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 15 Feb 2012 18:33:42 +0000 (18:33 +0000)]
ramips: raeth: add a helper function for skb allocation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30555
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 15 Feb 2012 18:33:41 +0000 (18:33 +0000)]
ramips: raeth: use netdev_alloc_skb
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30554
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 15 Feb 2012 18:33:40 +0000 (18:33 +0000)]
ramips: raeth: add '__packed __aligned(4)' annotation to dma descritor structures
This helps GCC to generare more efficient code.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30553
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 15 Feb 2012 18:33:38 +0000 (18:33 +0000)]
ramips: raeth: use 're' instead of 'priv' everywhere
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30552
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Wed, 15 Feb 2012 18:02:57 +0000 (18:02 +0000)]
ath9k: prevent writes to const data on AR9160
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30551
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 15 Feb 2012 13:47:52 +0000 (13:47 +0000)]
ramips: raeth: force link down in ramips_phy_stop
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30550
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 15 Feb 2012 13:47:50 +0000 (13:47 +0000)]
ramips: raeth: serialize ramips_link_adjust calls
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30549
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 15 Feb 2012 06:47:12 +0000 (06:47 +0000)]
ramips: raeth: add PHYLIB support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30547
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Tue, 14 Feb 2012 20:13:28 +0000 (20:13 +0000)]
[package] gdb: use an updated 6.8a tarball
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30543
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 20:11:28 +0000 (20:11 +0000)]
[kernel] add missing autoload shortcut to crypto modules for btrfs
Currently the btrfs module (and other fs modules) is loaded before other modules to provide early extroot compatibility. This will fail for btrfs however, because the dependencies crypto-core and crypto-hash are missing. This patch makes them available for early loading too.
Signed-off-by: Jan Willies <jan@willies.info>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30542
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 20:11:24 +0000 (20:11 +0000)]
linux-atm: update solos-pci driver to upstream
Fixes for the solos-pci driver.
- Corrects calculation of headroom for padding.
- Removes pointless debug messages.
- Expose Bis A and Bis M annex capabilities.
- Expose hardware revision.
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30541
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 20:11:22 +0000 (20:11 +0000)]
linux-atm: headroom/padding fixes
Submitted upstream to netdev by Chas Williams on linux-atm.
Signed-off-by: Philip Prindeville <philipp_subx@redfish-solutions.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30540
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 19:07:15 +0000 (19:07 +0000)]
mac80211: Allow preamble configuration
Add a new wireless config parameter short_preamble=0|1 to enable
usage of short preambles. Default is to only allow long preambles
as before.
Even if short_preamble is set to 1 hostapd will take care that
short preambles are disabled as soon as a STA associates that
cannot handle short preambles.
Signed-off-by: Helmut Schaa <helmut.schaa@googlemail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30539
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 19:07:13 +0000 (19:07 +0000)]
Add kernel module package for SLIP
This patch adds support for a kernel module package for SLIP. We needed it forusing tunslip6 from Contiki OS for 6LoWPAN communications.
Signed-off-by: Markus Becker <mab@comnets.uni-bremen.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30538
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 19:07:11 +0000 (19:07 +0000)]
[lantiq] generate uboot environment data in target
With this patch it is possible to generate uboot environment config file
inside lantiq target. Currently it is only supporting GIGASX76X board.
uboot environment config is used by fw_printenv fw_setenv tools.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30537
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 19:07:09 +0000 (19:07 +0000)]
Update bridge-utils to the last upstream version 1.5.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30536
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 19:07:07 +0000 (19:07 +0000)]
[OpenWrt-Devel] update e2fsprogs
Update e2fsprogs to the last upstream version 1.42.
blkid works fine without 100_add_missing_libpthread_for_blkid.patch.
Signed-off-by: Luka Perkov <openwrt@lukaperkov.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30535
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 19:07:05 +0000 (19:07 +0000)]
[lantiq] fix compile error in previous commit
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30534
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 17:48:04 +0000 (17:48 +0000)]
[lantiq] Support booting the Speedport W502V using BRN-BOOT.
While the disadvantage is less available flash space, it's easy and
safe to flash without opening the device.
Going back to the original firmware is also possible.
This patch add two firmware utilities, mkbrncmdline and mkbrnboot.
mkbrncmdline patches the uncompressed kernel so the registeres a0 to
a3 are initialized and the memory size is passed in.
mkbrnboot takes the lzma compressed kernel and squashfs images and
creates a firmware image that can be flashed using the BRN-BOOT
recovery kernel, which is booted by holding both buttons when
powering up the device and will listen on http://192.168.2.1.
The firmware file from bin/lantiq/ to use is
openwrt-lantiq-danube-ARV4525PW-BRNDTW502-brnImage
The BRN-BOOT recovery kernel does size-check the image, so if it's
too big to fit into flash it will complain accordingly.
A second patch is needed to make the wired network interface work
since there is no u-boot to pre-initialise it.
Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30532
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 17:48:01 +0000 (17:48 +0000)]
[pjsip] drop obselete Config.in file
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30531
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 14 Feb 2012 17:32:45 +0000 (17:32 +0000)]
ramips: extract eeprom for the PCIe wlan module on the RT-N56U
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30529
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 14 Feb 2012 17:32:44 +0000 (17:32 +0000)]
ramips: rt3883: enable PCI on the RT-N56U board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30528
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 14 Feb 2012 17:32:42 +0000 (17:32 +0000)]
ramips: rt3883: add PCI support
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30527
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 14 Feb 2012 17:32:41 +0000 (17:32 +0000)]
ramips: rt3883: sync 2.6.39 config
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30526
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Tue, 14 Feb 2012 17:32:40 +0000 (17:32 +0000)]
ramips: use SoC specific irq.h
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30525
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 15:05:58 +0000 (15:05 +0000)]
[lantiq] fixes irq locking in ethernet driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30522
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 15:05:57 +0000 (15:05 +0000)]
[lantiq] fixes gpio_export patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30521
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 15:05:55 +0000 (15:05 +0000)]
[pjsip] bump to 1.12, merge improved lantiq aud_dev driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30520
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 15:05:52 +0000 (15:05 +0000)]
[lantiq] add a simple sip client
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30519
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Tue, 14 Feb 2012 15:05:49 +0000 (15:05 +0000)]
[ltq-dsl] add annex selection support to ltq_dsl package
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30518
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 13 Feb 2012 17:11:58 +0000 (17:11 +0000)]
ar71xx: add profile and build image for the TP-Link TL-WR842N/ND v1 boards
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30508
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 13 Feb 2012 17:11:57 +0000 (17:11 +0000)]
ar71xx: add model detection for TL-WR842N/ND
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30507
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hcg [Mon, 13 Feb 2012 16:07:53 +0000 (16:07 +0000)]
[package] hostapd: correctly pass 64 char hex PSK to wpa_supplicant
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30504
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Mon, 13 Feb 2012 16:05:30 +0000 (16:05 +0000)]
[malta] update to 3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30503
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Mon, 13 Feb 2012 16:05:27 +0000 (16:05 +0000)]
[ar7] fix titan gpio register size
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30502
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 13 Feb 2012 15:31:31 +0000 (15:31 +0000)]
block-mount: do not auto-mount anonymous mtdblock devices (fixes #10960, #10850)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30501
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 13 Feb 2012 15:31:28 +0000 (15:31 +0000)]
quilt: add a NO_RECONFIGURE override for compiling a package without re-running Build/Configure
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30500
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 13 Feb 2012 15:18:05 +0000 (15:18 +0000)]
ramips: rt3883: update package list in the default profile
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30499
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 13 Feb 2012 15:18:04 +0000 (15:18 +0000)]
ramips: add preliminary support for the Asus RT-N56U board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30498
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 13 Feb 2012 15:18:03 +0000 (15:18 +0000)]
ramips: raeth: enable MDIO code for RT3883
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30497
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 13 Feb 2012 15:18:01 +0000 (15:18 +0000)]
package/modules: enable ECHI/OHCI for RT3883
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30496
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 13 Feb 2012 15:17:59 +0000 (15:17 +0000)]
ramips: add preliminary support for the RT3662/RT3883 SoCs
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30495
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Mon, 13 Feb 2012 12:36:36 +0000 (12:36 +0000)]
[package] kexec-tools: update to 2.0.3 (fixes #9846)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30493
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Mon, 13 Feb 2012 12:36:34 +0000 (12:36 +0000)]
[malta] add support for 3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30492
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Sun, 12 Feb 2012 22:41:20 +0000 (22:41 +0000)]
brcm47xx: deactivate CONFIG_NO_HZ as it seams not to be needed.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30488
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Sun, 12 Feb 2012 22:40:01 +0000 (22:40 +0000)]
brcm47xx: activate config bug to show warnings
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30487
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 12 Feb 2012 20:25:47 +0000 (20:25 +0000)]
gcc 4.6: port over the missing patch 850-use_shared_libgcc.patch to prevent libgcc crap from leaking into every single binary
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30486
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 12 Feb 2012 19:27:01 +0000 (19:27 +0000)]
swconfig: fix off-by-one error, causing segfaults on gcc 4.6+ (fixes #9765)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30485
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 12 Feb 2012 18:40:18 +0000 (18:40 +0000)]
package/grub: fix stage2 link with recent binutils
We want the `_start's symbols to be at the very beginning of the `stage2'
binary's `.text' section. However, nothing enforces this requirement. With
recent binutils (ie. post 2.19.1), this results in a corrupt binary, as ld(1)
puts another symbol (eg. `journal_init') at the beginning of the section.
Fix this by providing a stripped down version of the default linker script
where we enforces the position of `_start' in the `.text' section.
Patch by Arnaud Lacombe (#10444)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30484
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 12 Feb 2012 18:04:47 +0000 (18:04 +0000)]
ramips: use GENERIC_{4,8}M image template for WR5123GN
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30483
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 12 Feb 2012 18:04:46 +0000 (18:04 +0000)]
ramips: rt305x: pass MTD partition map to the ALL0256N via cmdline
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30482
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Sun, 12 Feb 2012 16:45:27 +0000 (16:45 +0000)]
brcm47xx: refresh patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30481
3c298f89-4303-0410-b956-
a3cf2f4a3e73
hauke [Sun, 12 Feb 2012 16:38:10 +0000 (16:38 +0000)]
brcm47xx: update usb driver for brcm47xx.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30480
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 12 Feb 2012 16:12:08 +0000 (16:12 +0000)]
tools/genext2fs: do not include the host getline.h, it breaks the tool in subtle ways, and the source already has a getline replacement
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30479
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 12 Feb 2012 16:12:01 +0000 (16:12 +0000)]
glibc: remove all previous (ancient) versions, add 2.14 (partially based on a patch and testing by WillieNL)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30478
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Sun, 12 Feb 2012 15:43:14 +0000 (15:43 +0000)]
broadcom-diag: fix WRT150N/WRT160N detection (patch from #10836)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30477
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 12 Feb 2012 12:52:14 +0000 (12:52 +0000)]
ramips: add initial support for 3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30476
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 12 Feb 2012 12:52:13 +0000 (12:52 +0000)]
ramips: include 'linux/module.h' in the ramips_spi driver
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30475
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 12 Feb 2012 12:52:12 +0000 (12:52 +0000)]
ramips: rt288x: remove per-board physmap_flash_data instances
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30474
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 12 Feb 2012 12:52:10 +0000 (12:52 +0000)]
ramips: rt305x: remove per-board physmap_flash_data instances
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30473
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Sun, 12 Feb 2012 11:22:08 +0000 (11:22 +0000)]
[cns3xxx]: enable another l2 cache errate on newer kernels
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30472
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Sun, 12 Feb 2012 09:56:47 +0000 (09:56 +0000)]
[toolchain/binutils]: enable 2.22 for unsupported archs if BROKEN is enabled
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30471
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Sun, 12 Feb 2012 09:48:39 +0000 (09:48 +0000)]
[toolchain/gcc]: upgrade vanilla gcc to 4.6.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30470
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Sun, 12 Feb 2012 09:17:54 +0000 (09:17 +0000)]
[toolchain/binutils]: use binutils 2.22 by default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30469
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Sun, 12 Feb 2012 09:15:29 +0000 (09:15 +0000)]
[toolchain/uClibc]: use uClibc 0.9.33 by default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@30468
3c298f89-4303-0410-b956-
a3cf2f4a3e73
This page took 0.077419 seconds and 4 git commands to generate.
projects / openwrt.git / log