git.rohieb.name - openwrt.git/log

juhosg [Wed, 4 Jan 2012 17:30:55 +0000 (17:30 +0000)]

ar71xx: show correct model name on TL-WA701N/ND boards

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29657 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Wed, 4 Jan 2012 17:30:54 +0000 (17:30 +0000)]

ar71xx: add profile and build image for the TL-WA701N/ND boards

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29656 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Wed, 4 Jan 2012 17:30:53 +0000 (17:30 +0000)]

firmware-utils/mktplinkfw: add support for TL-WA701N/ND

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29655 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Wed, 4 Jan 2012 17:30:52 +0000 (17:30 +0000)]

ar71xx: fix network configuration for the TL-WA901N/ND boards

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29654 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Wed, 4 Jan 2012 17:30:50 +0000 (17:30 +0000)]

ar71xx: allow to use LAN LED on the TL-WA901N/ND boards

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29653 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Wed, 4 Jan 2012 17:30:49 +0000 (17:30 +0000)]

ar71xx: add default LED configuration for the TL-MR3020

Also use the system LED for diagnostic.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29652 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Wed, 4 Jan 2012 17:30:47 +0000 (17:30 +0000)]

ar71xx: add support for TP-Link TL-MR3020

This patch adds support for the TP-Link device TL-MR3020 which is very
similiar to the TL-WR703N.
The TL-MR3020 uses 5 LEDs, 1 push button and a switch with 3 positions.
Only four LEDs can be controlled via GPIO. The power LED is connected to
the power supply.
The WPS push button has been mapped to KEY_WPS_BUTTON. The two GPIO signals
of the sliding switch have been mapped to BTN_0 and BTN_1.

I have also setup a wiki page with details here:
http://wiki.openwrt.org/toh/tp-link/tl-mr3020

USB is working and has been tested with USB mass storage and USB UMTS
stick.

Wifi also seems to work.

Ethernet is working too.

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29651 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Wed, 4 Jan 2012 17:30:44 +0000 (17:30 +0000)]

firmware-utils/mktplinkfw: add support for TL-MR3020

Signed-off-by: Christian Cier-Zniewski <c.cier@gmx.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29650 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Wed, 4 Jan 2012 17:30:42 +0000 (17:30 +0000)]

package: remove the om2p-watchdog package

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29649 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Wed, 4 Jan 2012 17:30:41 +0000 (17:30 +0000)]

ar71xx: use the new om-watchdog package for OM2P

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29648 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Wed, 4 Jan 2012 17:30:39 +0000 (17:30 +0000)]

package: add om-watchdog package

om2p-watchdog package is OM2P specific. However a similar watchdog
mechanism exists on OM1P as well. This new package wants to substitute
om2p-watchdog with a new one which is suitable either for OM1P and OM2P.

Signed-off-by: Antonio Quartulli <ordex@autistici.org>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29647 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Wed, 4 Jan 2012 12:32:47 +0000 (12:32 +0000)]

[toolchain] disable UCLIBC_HAS_XLOCALE and UCLIB_HAS_GLIBC_DIGIT_GROUPING if BUILD_NLS is on (#10735)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29646 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Wed, 4 Jan 2012 02:52:54 +0000 (02:52 +0000)]

add CT target and TTL/HL match+target

This patch adds the CT target for conntrack (enables manipulation of
conntrack events and supercedes NOTRACK) as well as the TTL/HL target and
match.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29645 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Wed, 4 Jan 2012 00:29:29 +0000 (00:29 +0000)]

[netfilter] remove current RTSP support

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29643 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Tue, 3 Jan 2012 23:08:15 +0000 (23:08 +0000)]

[generic] backport upstream commit e1738bd9cecc5c867b0e2996470c1ff20f66ba79 to affected kernels (#9802)
commit 8efa88540635 (sch_sfq: avoid giving spurious NET_XMIT_CN signals)
forgot to call qdisc_tree_decrease_qlen() to signal upper levels that a
packet (from another flow) was dropped, leading to various problems.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29642 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sun, 1 Jan 2012 19:30:29 +0000 (19:30 +0000)]

ar71xx: add profile and build factory image for the Hornet-UB board

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29637 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sun, 1 Jan 2012 19:30:28 +0000 (19:30 +0000)]

ar71xx: build images for the ALFA Network N2/N5 boards

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29636 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sun, 1 Jan 2012 19:30:25 +0000 (19:30 +0000)]

ar71xx: add support for the ALFA Network N2/N5 boards

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29635 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Sun, 1 Jan 2012 16:17:10 +0000 (16:17 +0000)]

[package] iwinfo: factor txpower offset into info display output, recompile if driver selection changes

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29634 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Sun, 1 Jan 2012 15:11:11 +0000 (15:11 +0000)]

[toolchain] if CONFIG_BUILD_NLS is selected, compile uClibc with locale support

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29633 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sat, 31 Dec 2011 15:02:46 +0000 (15:02 +0000)]

ar71xx: define LAN/WAN LEDs for the TL-WR741N/ND boards

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29631 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sat, 31 Dec 2011 15:02:40 +0000 (15:02 +0000)]

ar71xx: enable SWCONFIG_LEDS

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29630 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sat, 31 Dec 2011 15:02:35 +0000 (15:02 +0000)]

package/base-files: add support for the switch LED trigger

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29629 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sat, 31 Dec 2011 15:02:32 +0000 (15:02 +0000)]

package/base-files: use case statement in led init script

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29628 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sat, 31 Dec 2011 15:02:30 +0000 (15:02 +0000)]

kernel: swconfig: introduce a generic switch LED trigger

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29627 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sat, 31 Dec 2011 15:02:26 +0000 (15:02 +0000)]

ar71xx: ag71xx: implement get_port_{link,stats} callbacks

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29626 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sat, 31 Dec 2011 15:02:24 +0000 (15:02 +0000)]

kernel: swconfig: add get_port_{link,stats} callbacks

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29625 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sat, 31 Dec 2011 13:54:11 +0000 (13:54 +0000)]

ar71xx: fix LEDs on the WRT400N

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29624 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Wed, 28 Dec 2011 08:43:43 +0000 (08:43 +0000)]

ramips: rt288x: add support for the Belkin F5D8235-4 v1 board

Patch-by: Cezary Jackiewicz <cezary.jackiewicz@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29617 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Wed, 28 Dec 2011 08:43:36 +0000 (08:43 +0000)]

ramips: rt288x: change base address and window size of flash bank 0

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29616 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Wed, 28 Dec 2011 08:43:32 +0000 (08:43 +0000)]

ramips: rt305x: add support for the ALFA Networks W502U (R36) board

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29615 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Tue, 27 Dec 2011 16:59:43 +0000 (16:59 +0000)]

ar71xx: enable sysupgrade support for airrouter

Works for me! ;-)

Patch-by: Russell Senior <russell@personaltelco.net>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29614 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Tue, 27 Dec 2011 16:57:01 +0000 (16:57 +0000)]

ar71xx: fix sysupgrade on PB42/PB44 boards

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29613 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Tue, 27 Dec 2011 16:56:30 +0000 (16:56 +0000)]

ramips: rt288x: add support for the Buffalo WLI-TX4-AG300N board

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29612 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Sun, 25 Dec 2011 13:59:17 +0000 (13:59 +0000)]

[package] add usbreset - a small simple utility to send port rests to selected usb devices (#10394)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29611 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Sun, 25 Dec 2011 13:33:18 +0000 (13:33 +0000)]

[generic] add missing config symbol

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29610 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Sun, 25 Dec 2011 13:32:53 +0000 (13:32 +0000)]

[netfilter] package CT target

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29609 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Fri, 23 Dec 2011 19:24:38 +0000 (19:24 +0000)]

mac80211: clean up init, remove some redundant checks, fix tx power init (#10113)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29606 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

hauke [Fri, 23 Dec 2011 17:21:52 +0000 (17:21 +0000)]

brcm47xx: fix usb on more recent bcma based devices.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29605 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Fri, 23 Dec 2011 14:27:16 +0000 (14:27 +0000)]

ramips: initial support for Sitecom WL-351 v1 002

This add support for the Sitecom WL-351 v1 002.
In principle the Engenius ESR9850 should also work with this, but I
don't have the hardware to test it.

Since an external gigabit switch (RTL8366RB) is used,
I had to modify the ramips_esw driver to add a 'bypass' mode, which
just configures it to not filter the vlan tags.
Also two initialization words (FCT2 and FPA2) are set to different
values by u-boot than what the driver is using and it only seems to
work correctly when they not overridden by the driver, so I
added them to the platform specific data as reg_initval_fct2 and
reg_initval_fpa2.

With this wired lan works as expected, however I'm still having some
trouble with the wireless lan:
It only works after I rmmod & re-insmod rt2800pci and then
reconfigure it in the webinterface, but not directly after
rebooting.

The symptom of this is wpad saying:
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: associated (aid 1)
Dec 20 15:45:09 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> WPA: pairwise key handshake completed (RSN)
Dec 20 15:45:22 OpenWrt daemon.info hostapd: wlan1: STA <notebookmac> IEEE 802.11: authenticated

But wpa_supplicant on the client saying:
Authentication with <wl351mac> timed out.

Signed-off-by: Tobias Diedrich <ranma+openwrt@tdiedrich.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29604 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Fri, 23 Dec 2011 14:27:10 +0000 (14:27 +0000)]

ramips: add support for the Senao/EnGenius ESR-9753 board

Signed-off-by: Artur Wronowski <arteqw@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29603 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Fri, 23 Dec 2011 14:27:05 +0000 (14:27 +0000)]

ramips: define firmware partition for Omnima MiniEMBWiFi

Patch-by: Ivan Ignjatic <ivan@omnima.co.uk>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29602 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Thu, 22 Dec 2011 08:45:13 +0000 (08:45 +0000)]

kernel: enable magic sysrq by default, it does not add much to the kernel image size, but is useful for debugging many kinds of hangs/crashes

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29600 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Thu, 22 Dec 2011 05:43:53 +0000 (05:43 +0000)]

ar71xx: set a reserved bit that resets to 1 when writing the address table control register on the ar7240 switch (should fix #10547)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29598 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jogo [Wed, 21 Dec 2011 19:32:40 +0000 (19:32 +0000)]

ar71xx: add default network config for buffalo WZR-HP-G300NH2 and WZR-HP-G450H

Thanks netprince for reporting and testing.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29595 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Wed, 21 Dec 2011 01:27:48 +0000 (01:27 +0000)]

[ar71xx] the mach file of the WZR-HP-G300NH2 accidentally claimed the mach id of the WZR-HP-AG300H, correct the id (#10649)

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29593 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Tue, 20 Dec 2011 17:25:15 +0000 (17:25 +0000)]

[package] base-files: add -b (--create-backup) option to sysupgrade, which generates a backup .tar.gz according to the user settings. This will also be reused by LuCI.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29587 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Tue, 20 Dec 2011 01:10:15 +0000 (01:10 +0000)]

[package] firewall:
- introduce per-section "option enabled" which defaults to "1" - useful to disable rules or zones without having to delete them
- annotate default traffic rules with names
- bump version

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29577 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

hauke [Mon, 19 Dec 2011 23:55:20 +0000 (23:55 +0000)]

brcm47xx: remove patch starting adding brcm4716 to ssb

brcm4716 is supported by bcma now we do not need this patch

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29576 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

hauke [Mon, 19 Dec 2011 23:39:13 +0000 (23:39 +0000)]

brcm47xx: add new usb driver for bcma bus and replace ssb usb driver.

This new usb driver uses an extra device so the ehci and the ohci driver are not depending on ech other any more.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29575 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

hauke [Mon, 19 Dec 2011 23:33:03 +0000 (23:33 +0000)]

kernel: update bcma and ssb to version master-2011-12-16 from wireless-testing

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29574 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

hauke [Mon, 19 Dec 2011 23:26:15 +0000 (23:26 +0000)]

brcm47xx: remove support for kernel 2.6.39

There are problems with the patches for kernel 2.6.39 and I do not want to support two different sets of patches.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29573 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

hauke [Mon, 19 Dec 2011 23:23:34 +0000 (23:23 +0000)]

mac80211: deactivate mac80211 tracing

Activating tracing on kernel <= 2.6.32 causes build errors.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29572 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Mon, 19 Dec 2011 15:51:20 +0000 (15:51 +0000)]

ath9k: fix another tx locking issue

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29570 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Mon, 19 Dec 2011 10:27:28 +0000 (10:27 +0000)]

mac80211: fix powersave setting

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29569 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Mon, 19 Dec 2011 09:04:15 +0000 (09:04 +0000)]

ar71xx: add missing wireless led changes for wzr-hp-g300nh2

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29568 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Sun, 18 Dec 2011 22:20:17 +0000 (22:20 +0000)]

ar71xx: add support for the wzr-hp-g300nh2

Signed-off-by: Mark Deneen <mdeneen@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29567 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Sun, 18 Dec 2011 22:19:21 +0000 (22:19 +0000)]

mac80211: apply txpower after bringing up the interface, should fix #10113

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29566 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Sun, 18 Dec 2011 22:18:46 +0000 (22:18 +0000)]

mac80211: use iw instead of iwconfig to disable powersave

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29565 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Sun, 18 Dec 2011 22:17:34 +0000 (22:17 +0000)]

ath9k: fix some issues in the btcoex disable patch

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29564 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Sat, 17 Dec 2011 18:49:55 +0000 (18:49 +0000)]

ar71xx: use 64kraw template on more TP-Link boards

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29561 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Sat, 17 Dec 2011 14:28:25 +0000 (14:28 +0000)]

ath9k: fix a locking issue in the tx path

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29560 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Sat, 17 Dec 2011 14:28:20 +0000 (14:28 +0000)]

hostapd: add missing check for wds stations

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29559 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Fri, 16 Dec 2011 23:41:44 +0000 (23:41 +0000)]

ath9k: fix a crash in led init

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29558 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Thu, 15 Dec 2011 22:25:38 +0000 (22:25 +0000)]

ar71xx: connect GMAC0 to the internal switch on DB120

Because the external switch has no driver yet, connect GMAC0
to the PHY4 of the internal switch for now. This allows to
use the DB120 board as a router with 4LAN+1WAN ports.

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29557 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Thu, 15 Dec 2011 22:25:36 +0000 (22:25 +0000)]

ar71xx: add defines for the AR934X GMAC interface

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29556 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Thu, 15 Dec 2011 22:25:35 +0000 (22:25 +0000)]

ar71xx: fix GMAC1 interface speed on the DB120 board

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29555 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Thu, 15 Dec 2011 22:25:32 +0000 (22:25 +0000)]

ar71xx: ag71xx: fix switch port setup for AR934X

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29554 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Thu, 15 Dec 2011 22:25:30 +0000 (22:25 +0000)]

ar71xx: ag71xx: allow to connect PHY4 to the CPU on AR934X

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29553 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Thu, 15 Dec 2011 22:25:29 +0000 (22:25 +0000)]

ar71xx: ag71xx: setup switch interface mode on AR934X

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29552 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Thu, 15 Dec 2011 22:25:28 +0000 (22:25 +0000)]

ar71xx: ag71xx: detect the built-in switch of the AR934X SoCs

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29551 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Thu, 15 Dec 2011 22:25:22 +0000 (22:25 +0000)]

ar71xx: allow to attach the internal switch for AR934x

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29550 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Thu, 15 Dec 2011 22:25:11 +0000 (22:25 +0000)]

ar71xx: introduce ar71xx_switch_data

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29549 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Thu, 15 Dec 2011 22:03:48 +0000 (22:03 +0000)]

ar71xx: build images for TL-WR741N/ND v2

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29548 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Thu, 15 Dec 2011 22:03:46 +0000 (22:03 +0000)]

ar71x: use raw squashfs images for TP-Link boards

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29547 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Thu, 15 Dec 2011 22:03:45 +0000 (22:03 +0000)]

ar71xx: create a template for using unpadded squashfs images

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29546 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Thu, 15 Dec 2011 22:03:44 +0000 (22:03 +0000)]

ar71xx: put squash image right after the kernel on TP-Link boards

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29545 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Thu, 15 Dec 2011 22:03:42 +0000 (22:03 +0000)]

firmware-utils/mktplinkfw: add ability to put jffs2 eof marker into the image

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29544 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Thu, 15 Dec 2011 22:03:40 +0000 (22:03 +0000)]

ar71xx: tplinkpart: allow to detect JFFS2 as well

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29543 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Thu, 15 Dec 2011 13:25:23 +0000 (13:25 +0000)]

ar71xx: ag71xx: check PHY IDs before accessing the switch registers

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29541 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Thu, 15 Dec 2011 13:25:21 +0000 (13:25 +0000)]

ar71xx: ag71xx: don't use port 4 of the switch, it is not connected on ar724x

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29540 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Thu, 15 Dec 2011 13:25:20 +0000 (13:25 +0000)]

ar71xx: ag71xx: nuke ar7240sw_init

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29539 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Thu, 15 Dec 2011 13:25:18 +0000 (13:25 +0000)]

ar71xx: fix mac addresses on jjPlus devices

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29538 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Wed, 14 Dec 2011 21:03:52 +0000 (21:03 +0000)]

ath9k: fix a locking issue

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29537 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Wed, 14 Dec 2011 20:54:11 +0000 (20:54 +0000)]

ar71xx: build image for the Hornet-UB board

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29536 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Wed, 14 Dec 2011 20:54:10 +0000 (20:54 +0000)]

ar71xx: add support for ALFA Network's Hornet-UB board

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29535 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Wed, 14 Dec 2011 20:54:07 +0000 (20:54 +0000)]

ar71xx: add GPIO function bit defines for AR933X

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29534 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Wed, 14 Dec 2011 20:51:26 +0000 (20:51 +0000)]

ramips: add support for Omnima MiniEMBWiFi board

This patch adds support for the Omnima MiniEMBWiFi
Ralink RT3050F based board.

Based on a patch by Ivan Ignjatic <ivan at omnima.co.uk>

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29533 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Wed, 14 Dec 2011 20:47:24 +0000 (20:47 +0000)]

ar71xx: fix gpio count for ar7241/ar7242

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29532 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Wed, 14 Dec 2011 20:21:42 +0000 (20:21 +0000)]

ar71xx: register extra leds behind the wireless mac on wzr-hp-g450h

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29531 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Wed, 14 Dec 2011 20:21:36 +0000 (20:21 +0000)]

ath9k: add support for registering extra leds connected to the wmac gpio lines

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29530 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Tue, 13 Dec 2011 20:41:24 +0000 (20:41 +0000)]

ar71xx: get rid of squashfs-4k images

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29522 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Tue, 13 Dec 2011 20:41:22 +0000 (20:41 +0000)]

generic: disable 'small sector' erase in m25p80 driver

This fixes the issues with the jffs2 images on various boards. Using
JFFS2 on devices with 4KiB erase sectors is not safe:
http://lists.infradead.org/pipermail/linux-mtd/2011-June/036591.html

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29521 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Tue, 13 Dec 2011 15:34:08 +0000 (15:34 +0000)]

image: increase squashfs block size - visibly reduces image size in many cases

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29519 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

jow [Tue, 13 Dec 2011 15:29:45 +0000 (15:29 +0000)]

[package] kernel: rename kmod-switch-rtl8366_smi to kmod-switch-rtl8366-smi to avoid underscores in package names

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29518 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Tue, 13 Dec 2011 15:14:59 +0000 (15:14 +0000)]

kernel: move linux/ath9k_platform.h to generic files so that it can be reused from other targets

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29516 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Tue, 13 Dec 2011 15:00:43 +0000 (15:00 +0000)]

ar71xx: fix wireless led on wzr-hp-g450h

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29515 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Tue, 13 Dec 2011 14:59:43 +0000 (14:59 +0000)]

ar71xx: enable AR9341 support at setup.c

Patch-by: dyq <729650915@qq.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29514 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

juhosg [Tue, 13 Dec 2011 14:59:40 +0000 (14:59 +0000)]

ar71xx: Build images for Netgear WNDRMAC and WNDRMACv2

The WNDRMAC is a WNDR3700v2 (64MB RAM, 16MB flash) in a white case. The
WNDRMACv2 is a WNDR3800 (128MB RAM, 16MB flash) in a WNDRMAC case.

The WNDRMAC case doesn't have "holes" or labels for the 2.4GHz LED or
switch ports 2-4. The stock firmware uses a single LED (in the 5GHz
position) to indicate the status of both radios, and a single LED (in the
switch port 1 position) to indicate the status of all LAN ports. The
"missing" LEDs are present on the board, and easily shine through the
case. Unlike the stock firmware, OpenWrt will use these "hidden" LEDs.

I've tested the WNDRMACv2 image. I don't have a v1 WNDRMAC, but assume
that this is sufficient to build a fully-functional image.

Signed-off-by: Mark Mentovai <mark@moxienet.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29513 3c298f89-4303-0410-b956-a3cf2f4a3e73

commit | commitdiff | tree

nbd [Tue, 13 Dec 2011 13:51:05 +0000 (13:51 +0000)]

busybox: disable "mesg" by default

git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29510 3c298f89-4303-0410-b956-a3cf2f4a3e73

Personal OpenWRT clone

RSS Atom

This page took 0.06752 seconds and 4 git commands to generate.