jow [Tue, 15 Nov 2011 10:17:59 +0000 (10:17 +0000)]
[package] uhttpd: prevent linking uhttpd binary against crypto libraries
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29152
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Mon, 14 Nov 2011 21:37:53 +0000 (21:37 +0000)]
[package] broadcom-wl: align RADIUS options with r26482, patch by Etienne Champetier <etienne.champetier@free.fr>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29136
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 14 Nov 2011 21:21:24 +0000 (21:21 +0000)]
ath9k: do not put the hardware to full-sleep while tx is pending
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29133
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 14 Nov 2011 21:21:03 +0000 (21:21 +0000)]
ath9k: rework radio stop/start cleanup, avoid duplicate rx/tx stop, avoid early phy stop
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29132
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Mon, 14 Nov 2011 19:02:01 +0000 (19:02 +0000)]
[package] base-files: prime root password with "x" to notify programs that there is a shadow record, fix /bin/login.sh password detection accordingly.
Solves broken key based dropbear login with empty password after r28935.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29130
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Mon, 14 Nov 2011 18:55:58 +0000 (18:55 +0000)]
lantiq: fix falcon build breakage
dev-wifi-rt2x00 fails to build on falcon due to missing pci
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29129
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 14 Nov 2011 17:43:15 +0000 (17:43 +0000)]
ar71xx: fix USB LED on the DB120 board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29126
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 14 Nov 2011 17:43:14 +0000 (17:43 +0000)]
ar71xx: add a function for selecting output signal on a given GPIO pin
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29125
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 14 Nov 2011 17:43:13 +0000 (17:43 +0000)]
ar71xx: fix GPIO function handling on AR934x
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29124
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 14 Nov 2011 17:43:11 +0000 (17:43 +0000)]
ar71xx: add AR71XX_ prefix to GPIO_REG_* defines
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29123
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 14 Nov 2011 17:43:10 +0000 (17:43 +0000)]
ar71xx: merge nand scan patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29122
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 14 Nov 2011 14:06:37 +0000 (14:06 +0000)]
mac80211: enable support for RaLink Rt53xx USB devices in rt2800usb
The driver works quite nice and stable for me using a RaLink Rt5370 USB device.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29116
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nbd [Mon, 14 Nov 2011 14:06:32 +0000 (14:06 +0000)]
netifd: update to latest version, fixes tcp connection loss issues on dhcp rekey
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29115
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Mon, 14 Nov 2011 13:18:09 +0000 (13:18 +0000)]
[package] uci: update to latest git rev
7289b2d69aaffa9299b47aaaa0da1e9969ace6c1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29111
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 14 Nov 2011 13:07:47 +0000 (13:07 +0000)]
ar71xx: fix a compiler warning
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29110
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 14 Nov 2011 13:07:45 +0000 (13:07 +0000)]
ar71xx: fix GPIO count for AR934x
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29109
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 14 Nov 2011 11:49:53 +0000 (11:49 +0000)]
ar71xx: flush DDR writeback buffers for WMAC and PCIe on AR934X
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29108
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 14 Nov 2011 11:49:51 +0000 (11:49 +0000)]
ar71xx: use a dummy irq chip for WMAC and PCIe irq hadling
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29107
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 14 Nov 2011 11:49:49 +0000 (11:49 +0000)]
ar71xx: add AR934X_RESET_REG_PCIE_WMAC_INT_STATUS defines
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29106
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 14 Nov 2011 11:49:47 +0000 (11:49 +0000)]
ar71xx: add an irq parameter for ar724x_pcibios_init
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29105
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 14 Nov 2011 07:38:09 +0000 (07:38 +0000)]
ar71xx: remove hardwired interface parameters from mach-* files
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29103
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 14 Nov 2011 07:38:07 +0000 (07:38 +0000)]
ar71xx: force hardwired interface parameters in ar71xx_add_device_eth
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29102
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Mon, 14 Nov 2011 07:38:05 +0000 (07:38 +0000)]
ar71xx: use if-else instead of conditional operators in ar71xx_add_device_eth
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29101
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 13 Nov 2011 19:19:22 +0000 (19:19 +0000)]
[brcm63xx] build images for Pirelli A226M (#10409)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29045
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 13 Nov 2011 19:19:18 +0000 (19:19 +0000)]
[brcm63xx] register uart0 on DWV-S0 boards (#10409)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29044
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 13 Nov 2011 19:19:14 +0000 (19:19 +0000)]
[kernel] refresh 3.0 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29043
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 13 Nov 2011 19:19:10 +0000 (19:19 +0000)]
[kernel] refresh 2.6.39 patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29042
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 13 Nov 2011 19:19:05 +0000 (19:19 +0000)]
[brcm63xx] rename 456-board_DWV-S0_ehci.patch to 456-board_DWV-S0_fixes.patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29041
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Sun, 13 Nov 2011 18:41:26 +0000 (18:41 +0000)]
[rdc] fix typo, load ip17xx switch module
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29039
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 13 Nov 2011 17:36:36 +0000 (17:36 +0000)]
ar71xx: enable has_gbit flag on AR724{0,1}
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29026
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 13 Nov 2011 12:48:03 +0000 (12:48 +0000)]
ar71xx: fixup onboard PCIe chip registration on the DB120 board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29022
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 13 Nov 2011 12:48:01 +0000 (12:48 +0000)]
ar71xx: drop DB120_WMAC_MAC_OFFSET, it is not needed
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29021
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 13 Nov 2011 12:10:52 +0000 (12:10 +0000)]
madwifi: rename patch from ifxmips -> lantiq
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29020
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sun, 13 Nov 2011 12:09:34 +0000 (12:09 +0000)]
uboot-lantiq: not all configs were using lzma for compression, add gigaset ramboot image
Signed-off-by: Andrej Vlašić <andrej.vlasic0@gmail.com>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29019
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Sun, 13 Nov 2011 11:45:09 +0000 (11:45 +0000)]
include/kernel.mk: don't check for modules.builtin on 2.6.32-
modules.builtin is only available in 2.6.33 and later, so fall back to
assuming it's built-in for older kernels.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29018
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 13 Nov 2011 11:27:04 +0000 (11:27 +0000)]
ar71xx: ag71xx: add support for getting switch port link status
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29017
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 13 Nov 2011 11:27:03 +0000 (11:27 +0000)]
ar71xx: remove mii_ctrl resources of the ethernet devices
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29016
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 13 Nov 2011 11:27:01 +0000 (11:27 +0000)]
ar71xx: ag71xx: remove unused mii_ctrl field from struct ag71xx
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29015
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 13 Nov 2011 11:27:00 +0000 (11:27 +0000)]
ar71xx: ag71xx: remove unused mii_cfg related functions and defines
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29014
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 13 Nov 2011 11:26:59 +0000 (11:26 +0000)]
ar71xx: set MII interface speed from the set_speed callbacks
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29013
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 13 Nov 2011 11:26:57 +0000 (11:26 +0000)]
ar71xx: rename set_pll callback to set_speed in ag71xx_platform_data
Also rename the corresponding callback functions.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29012
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 13 Nov 2011 11:26:56 +0000 (11:26 +0000)]
ar71xx: ag71xx: remove MII interface setup code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29011
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 13 Nov 2011 11:26:54 +0000 (11:26 +0000)]
ar71xx: configure MII interface type from ar71xx_setup_phy_if_mode
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29010
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 13 Nov 2011 11:26:52 +0000 (11:26 +0000)]
ar71xx: fix occasional kernel hangs during boot on AR934x
The patch taken from the linux-mips mailing list.
The Kernel hangs occasionally during boot after
"Calibrating delay loop..". This is caused by the
c0_compare_int_usable() routine in cevt-r4k.c
returning false which causes the system to disable
the timer and hang later. The false return happens
because the routine is using a series of four calls
to irq_disable_hazard() as a delay while it waits
for the timer changes to propagate to the cp0 cause
register. On newer MIPS cores, like the 74K, the
series of irq_disable_hazard() calls turn into ehb
instructions and can take as little as a few clock
ticks for all 4 instructions. This is not enough of
a delay, so the routine thinks the timer is not
working.
This fix uses up to a max number of cycle counter
ticks for the delay and uses back_to_back_c0_hazard()
instead of irq_disable_hazard() to handle the hazard
condition between cp0 writes and cp0 reads.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29009
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sun, 13 Nov 2011 11:26:51 +0000 (11:26 +0000)]
ar71xx: refresh kernel patches
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29008
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Sun, 13 Nov 2011 10:48:05 +0000 (10:48 +0000)]
linux: update 3.1 to 3.1.1
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29007
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sat, 12 Nov 2011 23:40:21 +0000 (23:40 +0000)]
lantiq: add uci-defaults code for handling leds
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29004
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sat, 12 Nov 2011 23:40:16 +0000 (23:40 +0000)]
lantiq: add /lib/lantiq.sh and make hotplug handlers use it
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29003
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sat, 12 Nov 2011 23:40:12 +0000 (23:40 +0000)]
lantiq: rename leds
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29002
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sat, 12 Nov 2011 23:40:07 +0000 (23:40 +0000)]
lantiq: split compat headers out of bsp header patch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29001
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sat, 12 Nov 2011 23:40:01 +0000 (23:40 +0000)]
lantiq: adds hotplug handler for loading rt2x00 firmware
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@29000
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sat, 12 Nov 2011 23:39:56 +0000 (23:39 +0000)]
lantiq: adds hotplug handler for handling buttons and makes w303v work with it
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28999
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sat, 12 Nov 2011 23:39:51 +0000 (23:39 +0000)]
lantiq: cleanup default package selection
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28998
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Sat, 12 Nov 2011 18:41:15 +0000 (18:41 +0000)]
lantiq: w303v has its rt2860 eep on the nor flash. tell compat-wireless how to use it
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28994
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 12 Nov 2011 14:09:52 +0000 (14:09 +0000)]
kernel: ar8216: add support for the AR8236 switch
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28993
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 12 Nov 2011 14:09:50 +0000 (14:09 +0000)]
kernel: ar8216: move port vlan setup into a separate function
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28992
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nico [Sat, 12 Nov 2011 13:53:15 +0000 (13:53 +0000)]
package/base-files: enhance service functions
* allow matching process by name (useful for processes changing it)
* check if first argument is executable
* fix function name used in error messages
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28991
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 12 Nov 2011 12:50:20 +0000 (12:50 +0000)]
ar71xx: use the button for WPS control on the DB120
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28990
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 12 Nov 2011 12:50:19 +0000 (12:50 +0000)]
ar71xx: register the second ethernet interface on the DB120 board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28989
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 12 Nov 2011 12:50:18 +0000 (12:50 +0000)]
ar71xx: implement SoC specific phy interface setup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28988
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 12 Nov 2011 12:50:16 +0000 (12:50 +0000)]
ar71xx: move phy interface setup into a separate function
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28987
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 12 Nov 2011 12:09:59 +0000 (12:09 +0000)]
ar71xx: register both MDIO bus on the DB120 board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28986
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 12 Nov 2011 12:09:56 +0000 (12:09 +0000)]
ar71xx: add AR934X specific MDIO registration code
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28985
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 12 Nov 2011 12:09:54 +0000 (12:09 +0000)]
ar71xx: add a secondary mdio bus
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28984
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 12 Nov 2011 12:09:50 +0000 (12:09 +0000)]
ar71xx: rename ar71xx_mdio_* structures to ar71xx_mdio0_*
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28983
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 12 Nov 2011 12:09:48 +0000 (12:09 +0000)]
ar71xx: add an id argument to ar71xx_add_device_mdio
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28982
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 12 Nov 2011 12:09:42 +0000 (12:09 +0000)]
ar71xx: pass netdev and miidev pointer to ar71xx_add_device_dsa
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28981
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 12 Nov 2011 10:54:20 +0000 (10:54 +0000)]
ar71xx: add AR934x specific USB setup
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28980
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 12 Nov 2011 10:54:18 +0000 (10:54 +0000)]
ar71xx: register the first ethernet interface on the DB120 board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28979
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 12 Nov 2011 10:54:17 +0000 (10:54 +0000)]
ar71xx: allow to register ethernet interfaces for AR934X
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28978
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 12 Nov 2011 10:54:16 +0000 (10:54 +0000)]
ar71xx: ag71xx: use fixed link parameters if the mii bus is not registered
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28977
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 12 Nov 2011 10:54:15 +0000 (10:54 +0000)]
ar71xx: add AR934X specific bootstrap and reset register bits
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28976
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 12 Nov 2011 10:54:10 +0000 (10:54 +0000)]
ar71xx: add diag support for the DB120 board
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28975
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 12 Nov 2011 10:54:09 +0000 (10:54 +0000)]
ar71xx: fix GPIO direction setup for AR934x
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28974
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 12 Nov 2011 10:54:08 +0000 (10:54 +0000)]
ar71xx: fix AR934X clock frequency calculation
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28973
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 12 Nov 2011 10:54:06 +0000 (10:54 +0000)]
package: add om2p-watchdog script
Based on a patch by: Marek Lindner <lindner_marek@yahoo.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28972
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Sat, 12 Nov 2011 10:54:04 +0000 (10:54 +0000)]
ar71xx: generate ubootenv from uci-defaults instead of providing defconfig
I noticed most of /etc/defconfig was replaced by /etc/uci-defaults, which is
indeed much nicer. So I moved over ubootenv from having a defconfig-entry to
also be generated from uci-defaults.
Signed-off-by: Daniel Golle <dgolle@allnet.de>
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28971
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Fri, 11 Nov 2011 22:23:26 +0000 (22:23 +0000)]
pjsip: bump to 1.10 and improve ltq_tapi backend
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28963
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Fri, 11 Nov 2011 21:59:11 +0000 (21:59 +0000)]
lantiq: improve falcon package selection
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28962
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Fri, 11 Nov 2011 21:59:01 +0000 (21:59 +0000)]
lantiq: fix breakage introduced in 3.1 bump
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28961
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Fri, 11 Nov 2011 13:25:31 +0000 (13:25 +0000)]
[package] base-files: now that the initial password is completely empty (and not primed with "!") adjust login.sh for it to make telnetd available again
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28943
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nico [Fri, 11 Nov 2011 13:23:29 +0000 (13:23 +0000)]
package/base-files-network: fix udhcpc issues introduced in r28866 (closes: #10383)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28942
3c298f89-4303-0410-b956-
a3cf2f4a3e73
blogic [Fri, 11 Nov 2011 09:06:49 +0000 (09:06 +0000)]
remove empty folder lqtapi
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28941
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 10 Nov 2011 23:07:42 +0000 (23:07 +0000)]
[package] mac80211: add antenna control api for b43
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28940
3c298f89-4303-0410-b956-
a3cf2f4a3e73
florian [Thu, 10 Nov 2011 15:31:37 +0000 (15:31 +0000)]
[package] acx-mac80211: update to
20111030
Fixes build failures with Linux 3.1+
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28939
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Thu, 10 Nov 2011 13:39:06 +0000 (13:39 +0000)]
[base-files]: nuke another 2.4 skeleton
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28937
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Thu, 10 Nov 2011 12:55:01 +0000 (12:55 +0000)]
enable and use shadow passwords by default
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28936
3c298f89-4303-0410-b956-
a3cf2f4a3e73
kaloz [Thu, 10 Nov 2011 12:47:50 +0000 (12:47 +0000)]
[base-files]: the empty root password should be empty ;)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28935
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Thu, 10 Nov 2011 12:16:41 +0000 (12:16 +0000)]
base-files, target: assign name to system timeserver section, makes it easier to set servers on the cli
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28933
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Wed, 9 Nov 2011 22:11:51 +0000 (22:11 +0000)]
package: kernel: fix typo
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28898
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Wed, 9 Nov 2011 21:16:52 +0000 (21:16 +0000)]
package: kernel: add handling for 3.2 renames (and some missed ones for 3.1)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28897
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Wed, 9 Nov 2011 21:16:48 +0000 (21:16 +0000)]
package: mac80211: mark as broken for 3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28896
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Wed, 9 Nov 2011 21:16:45 +0000 (21:16 +0000)]
package: acx: mark as broken for 3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28895
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Wed, 9 Nov 2011 21:16:42 +0000 (21:16 +0000)]
package: madwifi: mark as broken for 3.2
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28894
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jogo [Wed, 9 Nov 2011 21:16:36 +0000 (21:16 +0000)]
target: linux: mtd: fix MTDREFRESH to an arbitrary high number
To make the ioctl number "stable", use an arbitrary high number to prevent
conflicts with new mtd ioctls that would push MTDREFRESH's number.
Also make mtd use the in-kernel mtd headers.
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28893
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 9 Nov 2011 18:55:28 +0000 (18:55 +0000)]
[package] uhttpd: cope with DES crypted passwd entries by not relying on a leading dollar sign to indicate a cipher
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28886
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nico [Wed, 9 Nov 2011 17:32:23 +0000 (17:32 +0000)]
package/busybox: passwd: use MD5 hash by default (like it used to be)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28885
3c298f89-4303-0410-b956-
a3cf2f4a3e73
juhosg [Wed, 9 Nov 2011 11:47:44 +0000 (11:47 +0000)]
pacakge/iw: don't show a stray ']' if the chain signal attribute list is empty
Without the patch, the output of 'station dump' command looks weird in
some cases:
root@OpenWrt:/# iw dev wlan0 station dump
Station 00:21:27:cb:57:02 (on wlan0)
inactive time: 190 ms
rx bytes: 36652
rx packets: 149
tx bytes: 1998
tx packets: 16
tx retries: 0
tx failed: 0
signal: -31 ] dBm
signal avg: -30 [-32, -36] dBm
tx bitrate: 5.5 MBit/s
rx bitrate: 54.0 MBit/s
root@OpenWrt:/#
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28879
3c298f89-4303-0410-b956-
a3cf2f4a3e73
jow [Wed, 9 Nov 2011 11:10:37 +0000 (11:10 +0000)]
[package] firewall: add DHCPv6 default rule (#10381)
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28874
3c298f89-4303-0410-b956-
a3cf2f4a3e73
nico [Wed, 9 Nov 2011 00:23:58 +0000 (00:23 +0000)]
package/base-files: /lib/functions.sh: add {group,user}_{add,exists} functions
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@28871
3c298f89-4303-0410-b956-
a3cf2f4a3e73
This page took 0.063323 seconds and 4 git commands to generate.
projects / openwrt.git / log