From 30d336cfc5e67d66ed19a84223a9215f42c30135 Mon Sep 17 00:00:00 2001
From: kaloz <kaloz@3c298f89-4303-0410-b956-a3cf2f4a3e73>
Date: Fri, 30 May 2008 16:32:35 +0000
Subject: [PATCH] refresh ixp4xx patches to match upstream style
git-svn-id: svn://svn.openwrt.org/openwrt/trunk@11297 3c298f89-4303-0410-b956-a3cf2f4a3e73
---
.../010-rtc_isl1208_new_style.patch | 32 +++++-----
.../011-rtc_pcf8563_new_style.patch | 14 ++---
.../012-rtc_x1205_new_style.patch | 12 ++--
.../030-ixp4xx_fsg_board_support.patch | 58 +++++++------------
.../031-ixp4xx_fsg_led_driver.patch | 20 +++----
.../090-increase_entropy_pools.patch | 6 +-
.../100-gateway7001_mac_plat_info.patch | 8 +--
.../101-wg302_mac_plat_info.patch | 8 +--
.../110-pronghorn_metro_support.patch | 42 +++++---------
.../111-pronghorn_metro_mac_plat_info.patch | 8 +--
.../patches-2.6.25/120-compex_support.patch | 38 +++++-------
.../121-compex_mac_plat_info.patch | 8 +--
.../130-wrt300nv2_support.patch | 34 ++++-------
.../131-wrt300nv2_mac_plat_info.patch | 8 +--
.../140-sidewinder_support.patch | 28 ++++-----
.../150-lanready_ap1000_support.patch | 30 ++++------
.../151-lanready_ap1000_mac_plat_info.patch | 8 +--
.../patches-2.6.25/160-wg302v1_support.patch | 26 +++------
.../161-wg302v1_mac_plat_info.patch | 8 +--
.../162-wg302v1_mem_fixup.patch | 10 ++--
.../170-ixdpg425_mac_plat_info.patch | 8 +--
.../patches-2.6.25/180-tw5334_support.patch | 34 ++++-------
.../patches-2.6.25/190-cambria_support.patch | 34 ++++-------
.../patches-2.6.25/200-npe_driver.patch | 38 +++++-------
...01-npe_driver_print_license_location.patch | 8 +--
.../202-npe_driver_switch_support.patch | 34 +++++------
.../203-npe_driver_phy_reset_autoneg.patch | 10 ++--
.../204-npe_driver_ixp43x_support.patch | 32 ++++------
.../ixp4xx/patches-2.6.25/210-npe_hss.patch | 20 +++----
.../294-eeprom_new_notifier.patch | 26 ++++-----
.../patches-2.6.25/295-latch_led_driver.patch | 28 ++++-----
.../296-avila_mac_plat_info.patch | 10 ++--
.../patches-2.6.25/300-avila_fetch_mac.patch | 10 ++--
.../ixp4xx/patches-2.6.25/301-avila_led.patch | 22 +++----
.../302-avila_gpio_device.patch | 14 ++---
.../303-avila_gw23x7_phy_quirk.patch | 26 ++++-----
.../patches-2.6.25/310-gtwx5717_spi_bus.patch | 8 +--
.../311-gtwx5717_mac_plat_info.patch | 8 +--
.../ixp4xx/patches-2.6.25/400-dmabounce.patch | 16 ++---
.../patches-2.6.25/401-avila_pci_dev.patch | 6 +-
40 files changed, 300 insertions(+), 498 deletions(-)
diff --git a/target/linux/ixp4xx/patches-2.6.25/010-rtc_isl1208_new_style.patch b/target/linux/ixp4xx/patches-2.6.25/010-rtc_isl1208_new_style.patch
index b29a6a264..e5eac05e2 100644
--- a/target/linux/ixp4xx/patches-2.6.25/010-rtc_isl1208_new_style.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/010-rtc_isl1208_new_style.patch
@@ -2,10 +2,8 @@
drivers/rtc/rtc-isl1208.c | 357 +++++++++++++++++++++-------------------------
1 file changed, 170 insertions(+), 187 deletions(-)
-Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/rtc/rtc-isl1208.c
-+++ linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
+--- a/drivers/rtc/rtc-isl1208.c
++++ b/drivers/rtc/rtc-isl1208.c
@@ -15,16 +15,15 @@
#include <linux/bcd.h>
#include <linux/rtc.h>
@@ -93,7 +91,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
BUG_ON(reg > ISL1208_REG_USR2);
BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
-@@ -103,15 +84,14 @@ isl1208_i2c_read_regs(struct i2c_client
+@@ -103,15 +84,14 @@
/* block write */
static int
isl1208_i2c_set_regs(struct i2c_client *client, u8 reg, u8 const buf[],
@@ -111,7 +109,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
BUG_ON(reg > ISL1208_REG_USR2);
BUG_ON(reg + len > ISL1208_REG_USR2 + 1);
-@@ -125,7 +105,8 @@ isl1208_i2c_set_regs(struct i2c_client *
+@@ -125,7 +105,8 @@
}
/* simple check to see wether we have a isl1208 */
@@ -121,7 +119,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
{
u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
u8 zero_mask[ISL1208_RTC_SECTION_LEN] = {
-@@ -139,24 +120,29 @@ static int isl1208_i2c_validate_client(s
+@@ -139,24 +120,29 @@
return ret;
for (i = 0; i < ISL1208_RTC_SECTION_LEN; ++i) {
@@ -157,7 +155,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
/* The 6bit value in the ATR register controls the load
* capacitance C_load * in steps of 0.25pF
-@@ -169,51 +155,54 @@ static int isl1208_i2c_get_atr(struct i2
+@@ -169,51 +155,54 @@
*
*/
@@ -225,7 +223,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
{
struct i2c_client *const client = to_i2c_client(dev);
int sr, dtr, atr, usr;
-@@ -230,20 +219,19 @@ static int isl1208_rtc_proc(struct devic
+@@ -230,20 +219,19 @@
(sr & ISL1208_REG_SR_ALM) ? " ALM" : "",
(sr & ISL1208_REG_SR_WRTC) ? " WRTC" : "",
(sr & ISL1208_REG_SR_XTOSCB) ? " XTOSCB" : "",
@@ -249,7 +247,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
usr = isl1208_i2c_get_usr(client);
if (usr >= 0)
-@@ -252,9 +240,8 @@ static int isl1208_rtc_proc(struct devic
+@@ -252,9 +240,8 @@
return 0;
}
@@ -261,7 +259,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
{
int sr;
u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
-@@ -274,27 +261,30 @@ static int isl1208_i2c_read_time(struct
+@@ -274,27 +261,30 @@
tm->tm_sec = BCD2BIN(regs[ISL1208_REG_SC]);
tm->tm_min = BCD2BIN(regs[ISL1208_REG_MN]);
@@ -299,7 +297,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
{
struct rtc_time *const tm = &alarm->time;
u8 regs[ISL1208_ALARM_SECTION_LEN] = { 0, };
-@@ -307,7 +297,7 @@ static int isl1208_i2c_read_alarm(struct
+@@ -307,7 +297,7 @@
}
sr = isl1208_i2c_read_regs(client, ISL1208_REG_SCA, regs,
@@ -308,7 +306,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
if (sr < 0) {
dev_err(&client->dev, "%s: reading alarm section failed\n",
__func__);
-@@ -315,23 +305,25 @@ static int isl1208_i2c_read_alarm(struct
+@@ -315,23 +305,25 @@
}
/* MSB of each alarm register is an enable bit */
@@ -343,7 +341,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
{
int sr;
u8 regs[ISL1208_RTC_SECTION_LEN] = { 0, };
-@@ -353,7 +345,7 @@ static int isl1208_i2c_set_time(struct i
+@@ -353,7 +345,7 @@
}
/* set WRTC */
@@ -352,7 +350,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
sr | ISL1208_REG_SR_WRTC);
if (sr < 0) {
dev_err(&client->dev, "%s: writing SR failed\n", __func__);
-@@ -369,7 +361,7 @@ static int isl1208_i2c_set_time(struct i
+@@ -369,7 +361,7 @@
}
/* clear WRTC again */
@@ -361,7 +359,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
sr & ~ISL1208_REG_SR_WRTC);
if (sr < 0) {
dev_err(&client->dev, "%s: writing SR failed\n", __func__);
-@@ -380,70 +372,69 @@ static int isl1208_i2c_set_time(struct i
+@@ -380,70 +372,69 @@
}
@@ -460,7 +458,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-isl1208.c
{
int usr = -1;
-@@ -460,124 +451,116 @@ static ssize_t isl1208_sysfs_store_usr(s
+@@ -460,124 +451,116 @@
return isl1208_i2c_set_usr(to_i2c_client(dev), usr) ? -EIO : count;
}
diff --git a/target/linux/ixp4xx/patches-2.6.25/011-rtc_pcf8563_new_style.patch b/target/linux/ixp4xx/patches-2.6.25/011-rtc_pcf8563_new_style.patch
index f0ce41f98..400da84b0 100644
--- a/target/linux/ixp4xx/patches-2.6.25/011-rtc_pcf8563_new_style.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/011-rtc_pcf8563_new_style.patch
@@ -2,10 +2,8 @@
drivers/rtc/rtc-pcf8563.c | 109 +++++++++++++---------------------------------
1 file changed, 32 insertions(+), 77 deletions(-)
-Index: linux-2.6.25.4/drivers/rtc/rtc-pcf8563.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/rtc/rtc-pcf8563.c
-+++ linux-2.6.25.4/drivers/rtc/rtc-pcf8563.c
+--- a/drivers/rtc/rtc-pcf8563.c
++++ b/drivers/rtc/rtc-pcf8563.c
@@ -18,17 +18,7 @@
#include <linux/bcd.h>
#include <linux/rtc.h>
@@ -25,7 +23,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-pcf8563.c
#define PCF8563_REG_ST1 0x00 /* status */
#define PCF8563_REG_ST2 0x01
-@@ -53,8 +43,10 @@ I2C_CLIENT_INSMOD;
+@@ -53,8 +43,10 @@
#define PCF8563_SC_LV 0x80 /* low voltage */
#define PCF8563_MO_C 0x80 /* century */
@@ -37,7 +35,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-pcf8563.c
/*
* The meaning of MO_C bit varies by the chip type.
* From PCF8563 datasheet: this bit is toggled when the years
-@@ -72,16 +64,13 @@ struct pcf8563 {
+@@ -72,16 +64,13 @@
int c_polarity; /* 0: MO_C=1 means 19xx, otherwise MO_C=1 means 20xx */
};
@@ -55,7 +53,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-pcf8563.c
unsigned char buf[13] = { PCF8563_REG_ST1 };
struct i2c_msg msgs[] = {
-@@ -138,7 +127,7 @@ static int pcf8563_get_datetime(struct i
+@@ -138,7 +127,7 @@
static int pcf8563_set_datetime(struct i2c_client *client, struct rtc_time *tm)
{
@@ -64,7 +62,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-pcf8563.c
int i, err;
unsigned char buf[9];
-@@ -257,100 +246,66 @@ static const struct rtc_class_ops pcf856
+@@ -257,100 +246,66 @@
.set_time = pcf8563_rtc_set_time,
};
diff --git a/target/linux/ixp4xx/patches-2.6.25/012-rtc_x1205_new_style.patch b/target/linux/ixp4xx/patches-2.6.25/012-rtc_x1205_new_style.patch
index bccbccc69..0cc1c5120 100644
--- a/target/linux/ixp4xx/patches-2.6.25/012-rtc_x1205_new_style.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/012-rtc_x1205_new_style.patch
@@ -2,10 +2,8 @@
drivers/rtc/rtc-x1205.c | 128 ++++++++++++++++--------------------------------
1 file changed, 43 insertions(+), 85 deletions(-)
-Index: linux-2.6.25.4/drivers/rtc/rtc-x1205.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/rtc/rtc-x1205.c
-+++ linux-2.6.25.4/drivers/rtc/rtc-x1205.c
+--- a/drivers/rtc/rtc-x1205.c
++++ b/drivers/rtc/rtc-x1205.c
@@ -22,20 +22,7 @@
#include <linux/rtc.h>
#include <linux/delay.h>
@@ -28,7 +26,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-x1205.c
/* offsets into CCR area */
-@@ -91,19 +78,7 @@ I2C_CLIENT_INSMOD;
+@@ -91,19 +78,7 @@
#define X1205_HR_MIL 0x80 /* Set in ccr.hour for 24 hr mode */
@@ -49,7 +47,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-x1205.c
/*
* In the routines that deal directly with the x1205 hardware, we use
-@@ -497,58 +472,51 @@ static ssize_t x1205_sysfs_show_dtrim(st
+@@ -497,58 +472,51 @@
}
static DEVICE_ATTR(dtrim, S_IRUGO, x1205_sysfs_show_dtrim, NULL);
@@ -135,7 +133,7 @@ Index: linux-2.6.25.4/drivers/rtc/rtc-x1205.c
i2c_set_clientdata(client, rtc);
-@@ -565,45 +533,35 @@ static int x1205_probe(struct i2c_adapte
+@@ -565,45 +533,35 @@
else
dev_err(&client->dev, "couldn't read status\n");
diff --git a/target/linux/ixp4xx/patches-2.6.25/030-ixp4xx_fsg_board_support.patch b/target/linux/ixp4xx/patches-2.6.25/030-ixp4xx_fsg_board_support.patch
index ddbb8a431..8fb7280e0 100644
--- a/target/linux/ixp4xx/patches-2.6.25/030-ixp4xx_fsg_board_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/030-ixp4xx_fsg_board_support.patch
@@ -45,11 +45,9 @@ now calls machine_restart() directly.
create mode 100644 arch/arm/mach-ixp4xx/fsg-setup.c
create mode 100644 include/asm-arm/arch-ixp4xx/fsg.h
-Index: linux-2.6.25.4/arch/arm/configs/ixp4xx_defconfig
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/configs/ixp4xx_defconfig
-+++ linux-2.6.25.4/arch/arm/configs/ixp4xx_defconfig
-@@ -165,6 +165,7 @@ CONFIG_ARCH_PRPMC1100=y
+--- a/arch/arm/configs/ixp4xx_defconfig
++++ b/arch/arm/configs/ixp4xx_defconfig
+@@ -165,6 +165,7 @@
CONFIG_MACH_NAS100D=y
CONFIG_MACH_DSMG600=y
CONFIG_ARCH_IXDP4XX=y
@@ -57,7 +55,7 @@ Index: linux-2.6.25.4/arch/arm/configs/ixp4xx_defconfig
CONFIG_CPU_IXP46X=y
CONFIG_CPU_IXP43X=y
CONFIG_MACH_GTWX5715=y
-@@ -770,7 +771,7 @@ CONFIG_ATA=y
+@@ -770,7 +771,7 @@
# CONFIG_SATA_SIL24 is not set
# CONFIG_SATA_SIS is not set
# CONFIG_SATA_ULI is not set
@@ -66,7 +64,7 @@ Index: linux-2.6.25.4/arch/arm/configs/ixp4xx_defconfig
# CONFIG_SATA_VITESSE is not set
# CONFIG_SATA_INIC162X is not set
# CONFIG_PATA_ALI is not set
-@@ -1143,7 +1144,7 @@ CONFIG_HWMON=y
+@@ -1143,7 +1144,7 @@
# CONFIG_SENSORS_VIA686A is not set
# CONFIG_SENSORS_VT1211 is not set
# CONFIG_SENSORS_VT8231 is not set
@@ -75,7 +73,7 @@ Index: linux-2.6.25.4/arch/arm/configs/ixp4xx_defconfig
# CONFIG_SENSORS_W83791D is not set
# CONFIG_SENSORS_W83792D is not set
# CONFIG_SENSORS_W83793 is not set
-@@ -1334,8 +1335,8 @@ CONFIG_LEDS_CLASS=y
+@@ -1334,8 +1335,8 @@
#
# LED drivers
#
@@ -85,7 +83,7 @@ Index: linux-2.6.25.4/arch/arm/configs/ixp4xx_defconfig
#
# LED Triggers
-@@ -1367,7 +1368,7 @@ CONFIG_RTC_INTF_DEV=y
+@@ -1367,7 +1368,7 @@
# CONFIG_RTC_DRV_DS1672 is not set
# CONFIG_RTC_DRV_MAX6900 is not set
# CONFIG_RTC_DRV_RS5C372 is not set
@@ -94,11 +92,9 @@ Index: linux-2.6.25.4/arch/arm/configs/ixp4xx_defconfig
CONFIG_RTC_DRV_X1205=y
CONFIG_RTC_DRV_PCF8563=y
# CONFIG_RTC_DRV_PCF8583 is not set
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-@@ -125,6 +125,15 @@ config ARCH_IXDP4XX
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -125,6 +125,15 @@
depends on ARCH_IXDP425 || MACH_IXDP465 || MACH_KIXRP435
default y
@@ -114,11 +110,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
#
# Certain registers and IRQs are only enabled if supporting IXP465 CPUs
#
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-@@ -15,6 +15,7 @@ obj-pci-$(CONFIG_MACH_NAS100D) += nas10
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -15,6 +15,7 @@
obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
@@ -126,7 +120,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
obj-y += common.o
-@@ -28,6 +29,7 @@ obj-$(CONFIG_MACH_NAS100D) += nas100d-se
+@@ -28,6 +29,7 @@
obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o
obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
@@ -134,10 +128,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/fsg-pci.c
-===================================================================
--- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/fsg-pci.c
++++ b/arch/arm/mach-ixp4xx/fsg-pci.c
@@ -0,0 +1,71 @@
+/*
+ * arch/arch/mach-ixp4xx/fsg-pci.c
@@ -210,10 +202,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/fsg-pci.c
+}
+
+subsys_initcall(fsg_pci_init);
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/fsg-setup.c
-===================================================================
--- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/fsg-setup.c
++++ b/arch/arm/mach-ixp4xx/fsg-setup.c
@@ -0,0 +1,276 @@
+/*
+ * arch/arm/mach-ixp4xx/fsg-setup.c
@@ -491,10 +481,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/fsg-setup.c
+ .init_machine = fsg_init,
+MACHINE_END
+
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/fsg.h
-===================================================================
--- /dev/null
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/fsg.h
++++ b/include/asm-arm/arch-ixp4xx/fsg.h
@@ -0,0 +1,50 @@
+/*
+ * include/asm-arm/arch-ixp4xx/fsg.h
@@ -546,10 +534,8 @@ Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/fsg.h
+#define FSG_LED_USB_BIT 4
+#define FSG_LED_RING_BIT 5
+#define FSG_LED_SYNC_BIT 7
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/hardware.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/hardware.h
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/hardware.h
+--- a/include/asm-arm/arch-ixp4xx/hardware.h
++++ b/include/asm-arm/arch-ixp4xx/hardware.h
@@ -45,5 +45,6 @@
#include "nslu2.h"
#include "nas100d.h"
@@ -557,10 +543,8 @@ Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/hardware.h
+#include "fsg.h"
#endif /* _ASM_ARCH_HARDWARE_H */
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/irqs.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/irqs.h
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/irqs.h
+--- a/include/asm-arm/arch-ixp4xx/irqs.h
++++ b/include/asm-arm/arch-ixp4xx/irqs.h
@@ -128,4 +128,11 @@
#define IRQ_DSMG600_PCI_INTE IRQ_IXP4XX_GPIO7
#define IRQ_DSMG600_PCI_INTF IRQ_IXP4XX_GPIO6
diff --git a/target/linux/ixp4xx/patches-2.6.25/031-ixp4xx_fsg_led_driver.patch b/target/linux/ixp4xx/patches-2.6.25/031-ixp4xx_fsg_led_driver.patch
index 4ebee8d66..051fc7cd0 100644
--- a/target/linux/ixp4xx/patches-2.6.25/031-ixp4xx_fsg_led_driver.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/031-ixp4xx_fsg_led_driver.patch
@@ -18,11 +18,9 @@ KernelVersion: v2.6.25-rc6-117-g457fb60
3 files changed, 268 insertions(+), 0 deletions(-)
create mode 100644 drivers/leds/leds-fsg.c
-Index: linux-2.6.25.4/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/leds/Kconfig
-+++ linux-2.6.25.4/drivers/leds/Kconfig
-@@ -46,6 +46,12 @@ config LEDS_SPITZ
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -46,6 +46,12 @@
This option enables support for the LEDs on Sharp Zaurus
SL-Cxx00 series (C1000, C3000, C3100).
@@ -35,11 +33,9 @@ Index: linux-2.6.25.4/drivers/leds/Kconfig
config LEDS_TOSA
tristate "LED Support for the Sharp SL-6000 series"
depends on LEDS_CLASS && PXA_SHARPSL
-Index: linux-2.6.25.4/drivers/leds/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/leds/Makefile
-+++ linux-2.6.25.4/drivers/leds/Makefile
-@@ -22,6 +22,7 @@ obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -22,6 +22,7 @@
obj-$(CONFIG_LEDS_CM_X270) += leds-cm-x270.o
obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
@@ -47,10 +43,8 @@ Index: linux-2.6.25.4/drivers/leds/Makefile
# LED Triggers
obj-$(CONFIG_LEDS_TRIGGER_TIMER) += ledtrig-timer.o
-Index: linux-2.6.25.4/drivers/leds/leds-fsg.c
-===================================================================
--- /dev/null
-+++ linux-2.6.25.4/drivers/leds/leds-fsg.c
++++ b/drivers/leds/leds-fsg.c
@@ -0,0 +1,261 @@
+/*
+ * LED Driver for the Freecom FSG-3
diff --git a/target/linux/ixp4xx/patches-2.6.25/090-increase_entropy_pools.patch b/target/linux/ixp4xx/patches-2.6.25/090-increase_entropy_pools.patch
index 7c959554a..55e065edb 100644
--- a/target/linux/ixp4xx/patches-2.6.25/090-increase_entropy_pools.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/090-increase_entropy_pools.patch
@@ -1,7 +1,5 @@
-Index: linux-2.6.25.4/drivers/char/random.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/char/random.c
-+++ linux-2.6.25.4/drivers/char/random.c
+--- a/drivers/char/random.c
++++ b/drivers/char/random.c
@@ -248,9 +248,9 @@
/*
* Configuration information
diff --git a/target/linux/ixp4xx/patches-2.6.25/100-gateway7001_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.25/100-gateway7001_mac_plat_info.patch
index 5d92f104b..a2ebb1a83 100644
--- a/target/linux/ixp4xx/patches-2.6.25/100-gateway7001_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/100-gateway7001_mac_plat_info.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/gateway7001-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/gateway7001-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/gateway7001-setup.c
-@@ -76,9 +76,36 @@ static struct platform_device gateway700
+--- a/arch/arm/mach-ixp4xx/gateway7001-setup.c
++++ b/arch/arm/mach-ixp4xx/gateway7001-setup.c
+@@ -76,9 +76,36 @@
.resource = &gateway7001_uart_resource,
};
diff --git a/target/linux/ixp4xx/patches-2.6.25/101-wg302_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.25/101-wg302_mac_plat_info.patch
index 81b89c7bf..850947fc8 100644
--- a/target/linux/ixp4xx/patches-2.6.25/101-wg302_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/101-wg302_mac_plat_info.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/wg302v2-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/wg302v2-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/wg302v2-setup.c
-@@ -77,9 +77,27 @@ static struct platform_device wg302v2_ua
+--- a/arch/arm/mach-ixp4xx/wg302v2-setup.c
++++ b/arch/arm/mach-ixp4xx/wg302v2-setup.c
+@@ -77,9 +77,27 @@
.resource = &wg302v2_uart_resource,
};
diff --git a/target/linux/ixp4xx/patches-2.6.25/110-pronghorn_metro_support.patch b/target/linux/ixp4xx/patches-2.6.25/110-pronghorn_metro_support.patch
index 3f8094daa..6908a28ad 100644
--- a/target/linux/ixp4xx/patches-2.6.25/110-pronghorn_metro_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/110-pronghorn_metro_support.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-@@ -57,6 +57,14 @@ config MACH_WG302V2
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -57,6 +57,14 @@
WG302 v2 or WAG302 v2 Access Points. For more information
on this platform, see http://openwrt.org
@@ -17,11 +15,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
config ARCH_IXDP425
bool "IXDP425"
help
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-@@ -16,6 +16,7 @@ obj-pci-$(CONFIG_MACH_DSMG600) += dsmg6
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -16,6 +16,7 @@
obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
@@ -29,7 +25,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
obj-y += common.o
-@@ -30,6 +31,7 @@ obj-$(CONFIG_MACH_DSMG600) += dsmg6
+@@ -30,6 +31,7 @@
obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
obj-$(CONFIG_MACH_FSG) += fsg-setup.o
@@ -37,10 +33,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/pronghornmetro-pci.c
-===================================================================
--- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/pronghornmetro-pci.c
++++ b/arch/arm/mach-ixp4xx/pronghornmetro-pci.c
@@ -0,0 +1,74 @@
+/*
+ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
@@ -116,10 +110,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/pronghornmetro-pci.c
+}
+
+subsys_initcall(pronghornmetro_pci_init);
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-===================================================================
--- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
++++ b/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
@@ -0,0 +1,147 @@
+/*
+ * arch/arm/mach-ixp4xx/pronghornmetro-setup.c
@@ -268,11 +260,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
+ .init_machine = pronghornmetro_init,
+MACHINE_END
+#endif
-Index: linux-2.6.25.4/Documentation/arm/IXP4xx
-===================================================================
---- linux-2.6.25.4.orig/Documentation/arm/IXP4xx
-+++ linux-2.6.25.4/Documentation/arm/IXP4xx
-@@ -111,6 +111,9 @@ http://www.adiengineering.com/productsCo
+--- a/Documentation/arm/IXP4xx
++++ b/Documentation/arm/IXP4xx
+@@ -111,6 +111,9 @@
the platform has two mini-PCI slots used for 802.11[bga] cards.
Finally, there is an IDE port hanging off the expansion bus.
@@ -282,11 +272,9 @@ Index: linux-2.6.25.4/Documentation/arm/IXP4xx
Gateworks Avila Network Platform
http://www.gateworks.com/avila_sbc.htm
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/uncompress.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/uncompress.h
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/uncompress.h
-@@ -41,7 +41,8 @@ static __inline__ void __arch_decomp_set
+--- a/include/asm-arm/arch-ixp4xx/uncompress.h
++++ b/include/asm-arm/arch-ixp4xx/uncompress.h
+@@ -41,7 +41,8 @@
* Some boards are using UART2 as console
*/
if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
diff --git a/target/linux/ixp4xx/patches-2.6.25/111-pronghorn_metro_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.25/111-pronghorn_metro_mac_plat_info.patch
index 2cd5a8181..3450b5b02 100644
--- a/target/linux/ixp4xx/patches-2.6.25/111-pronghorn_metro_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/111-pronghorn_metro_mac_plat_info.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
-@@ -104,9 +104,36 @@ static struct platform_device pronghornm
+--- a/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
++++ b/arch/arm/mach-ixp4xx/pronghornmetro-setup.c
+@@ -104,9 +104,36 @@
.resource = pronghornmetro_pata_resources,
};
diff --git a/target/linux/ixp4xx/patches-2.6.25/120-compex_support.patch b/target/linux/ixp4xx/patches-2.6.25/120-compex_support.patch
index 6326db1ac..689d7a3c7 100644
--- a/target/linux/ixp4xx/patches-2.6.25/120-compex_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/120-compex_support.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-@@ -65,6 +65,14 @@ config MACH_PRONGHORNMETRO
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -65,6 +65,14 @@
Engineering Pronghorn Metro Platform. For more
information on this platform, see <file:Documentation/arm/IXP4xx>.
@@ -17,11 +15,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
config ARCH_IXDP425
bool "IXDP425"
help
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-@@ -17,6 +17,7 @@ obj-pci-$(CONFIG_MACH_GATEWAY7001) += ga
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -17,6 +17,7 @@
obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
@@ -29,7 +25,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
obj-y += common.o
-@@ -32,6 +33,7 @@ obj-$(CONFIG_MACH_GATEWAY7001) += gatewa
+@@ -32,6 +33,7 @@
obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
obj-$(CONFIG_MACH_FSG) += fsg-setup.o
obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
@@ -37,10 +33,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/compex-setup.c
-===================================================================
--- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/compex-setup.c
++++ b/arch/arm/mach-ixp4xx/compex-setup.c
@@ -0,0 +1,120 @@
+/*
+ * arch/arm/mach-ixp4xx/compex-setup.c
@@ -162,11 +156,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/compex-setup.c
+ .init_machine = compex_init,
+MACHINE_END
+#endif
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ixdp425-pci.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/ixdp425-pci.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/ixdp425-pci.c
-@@ -66,7 +66,7 @@ struct hw_pci ixdp425_pci __initdata = {
+--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
++++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
+@@ -66,7 +66,7 @@
int __init ixdp425_pci_init(void)
{
if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
@@ -175,11 +167,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ixdp425-pci.c
pci_common_init(&ixdp425_pci);
return 0;
}
-Index: linux-2.6.25.4/arch/arm/tools/mach-types
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/tools/mach-types
-+++ linux-2.6.25.4/arch/arm/tools/mach-types
-@@ -1276,7 +1276,7 @@ oiab MACH_OIAB OIAB 1269
+--- a/arch/arm/tools/mach-types
++++ b/arch/arm/tools/mach-types
+@@ -1276,7 +1276,7 @@
smdk6400 MACH_SMDK6400 SMDK6400 1270
nokia_n800 MACH_NOKIA_N800 NOKIA_N800 1271
greenphone MACH_GREENPHONE GREENPHONE 1272
diff --git a/target/linux/ixp4xx/patches-2.6.25/121-compex_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.25/121-compex_mac_plat_info.patch
index 7c0d76ca2..fb71edc14 100644
--- a/target/linux/ixp4xx/patches-2.6.25/121-compex_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/121-compex_mac_plat_info.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/compex-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/compex-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/compex-setup.c
-@@ -90,9 +90,36 @@ static struct platform_device compex_uar
+--- a/arch/arm/mach-ixp4xx/compex-setup.c
++++ b/arch/arm/mach-ixp4xx/compex-setup.c
+@@ -90,9 +90,36 @@
.resource = compex_uart_resources,
};
diff --git a/target/linux/ixp4xx/patches-2.6.25/130-wrt300nv2_support.patch b/target/linux/ixp4xx/patches-2.6.25/130-wrt300nv2_support.patch
index 5665f65e5..b797cb425 100644
--- a/target/linux/ixp4xx/patches-2.6.25/130-wrt300nv2_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/130-wrt300nv2_support.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-@@ -73,6 +73,14 @@ config MACH_COMPEX
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -73,6 +73,14 @@
WP18 or NP18A boards. For more information on this
platform, see http://openwrt.org
@@ -17,11 +15,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
config ARCH_IXDP425
bool "IXDP425"
help
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-@@ -18,6 +18,7 @@ obj-pci-$(CONFIG_MACH_WG302V2) += wg302
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -18,6 +18,7 @@
obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
@@ -29,7 +25,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
obj-y += common.o
-@@ -34,6 +35,7 @@ obj-$(CONFIG_MACH_WG302V2) += wg302v2-se
+@@ -34,6 +35,7 @@
obj-$(CONFIG_MACH_FSG) += fsg-setup.o
obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
@@ -37,10 +33,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
-===================================================================
--- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
++++ b/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
@@ -0,0 +1,65 @@
+/*
+ * arch/arch/mach-ixp4xx/wrt300nv2-pci.c
@@ -107,10 +101,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/wrt300nv2-pci.c
+}
+
+subsys_initcall(wrt300nv2_pci_init);
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-===================================================================
--- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
++++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
@@ -0,0 +1,108 @@
+/*
+ * arch/arm/mach-ixp4xx/wrt300nv2-setup.c
@@ -220,11 +212,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
+ .init_machine = wrt300nv2_init,
+MACHINE_END
+#endif
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/uncompress.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/uncompress.h
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/uncompress.h
-@@ -42,7 +42,7 @@ static __inline__ void __arch_decomp_set
+--- a/include/asm-arm/arch-ixp4xx/uncompress.h
++++ b/include/asm-arm/arch-ixp4xx/uncompress.h
+@@ -42,7 +42,7 @@
*/
if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
machine_is_gateway7001() || machine_is_wg302v2() ||
diff --git a/target/linux/ixp4xx/patches-2.6.25/131-wrt300nv2_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.25/131-wrt300nv2_mac_plat_info.patch
index b1d6dd201..f199fc9b9 100644
--- a/target/linux/ixp4xx/patches-2.6.25/131-wrt300nv2_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/131-wrt300nv2_mac_plat_info.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
-@@ -76,9 +76,36 @@ static struct platform_device wrt300nv2_
+--- a/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
++++ b/arch/arm/mach-ixp4xx/wrt300nv2-setup.c
+@@ -76,9 +76,36 @@
.resource = &wrt300nv2_uart_resource,
};
diff --git a/target/linux/ixp4xx/patches-2.6.25/140-sidewinder_support.patch b/target/linux/ixp4xx/patches-2.6.25/140-sidewinder_support.patch
index 48188a587..50f6e2752 100644
--- a/target/linux/ixp4xx/patches-2.6.25/140-sidewinder_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/140-sidewinder_support.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-@@ -65,6 +65,14 @@ config MACH_PRONGHORNMETRO
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -65,6 +65,14 @@
Engineering Pronghorn Metro Platform. For more
information on this platform, see <file:Documentation/arm/IXP4xx>.
@@ -17,7 +15,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
config MACH_COMPEX
bool "Compex WP18 / NP18A"
select PCI
-@@ -163,7 +171,7 @@ config MACH_FSG
+@@ -163,7 +171,7 @@
#
config CPU_IXP46X
bool
@@ -26,11 +24,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
default y
config CPU_IXP43X
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-@@ -19,6 +19,7 @@ obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -19,6 +19,7 @@
obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
@@ -38,7 +34,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
obj-y += common.o
-@@ -36,6 +37,7 @@ obj-$(CONFIG_MACH_FSG) += fsg-setup.o
+@@ -36,6 +37,7 @@
obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
@@ -46,10 +42,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/sidewinder-pci.c
-===================================================================
--- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/sidewinder-pci.c
++++ b/arch/arm/mach-ixp4xx/sidewinder-pci.c
@@ -0,0 +1,71 @@
+/*
+ * arch/arch/mach-ixp4xx/pronghornmetro-pci.c
@@ -122,10 +116,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/sidewinder-pci.c
+}
+
+subsys_initcall(sidewinder_pci_init);
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/sidewinder-setup.c
-===================================================================
--- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/sidewinder-setup.c
++++ b/arch/arm/mach-ixp4xx/sidewinder-setup.c
@@ -0,0 +1,115 @@
+/*
+ * arch/arm/mach-ixp4xx/sidewinder-setup.c
diff --git a/target/linux/ixp4xx/patches-2.6.25/150-lanready_ap1000_support.patch b/target/linux/ixp4xx/patches-2.6.25/150-lanready_ap1000_support.patch
index ccbfe28db..d6d7cf6f7 100644
--- a/target/linux/ixp4xx/patches-2.6.25/150-lanready_ap1000_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/150-lanready_ap1000_support.patch
@@ -1,7 +1,5 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ap1000-setup.c
-===================================================================
--- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/ap1000-setup.c
++++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
@@ -0,0 +1,151 @@
+/*
+ * arch/arm/mach-ixp4xx/ap1000-setup.c
@@ -154,11 +152,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ap1000-setup.c
+ .init_machine = ap1000_init,
+MACHINE_END
+#endif
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ixdp425-pci.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/ixdp425-pci.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/ixdp425-pci.c
-@@ -66,7 +66,8 @@ struct hw_pci ixdp425_pci __initdata = {
+--- a/arch/arm/mach-ixp4xx/ixdp425-pci.c
++++ b/arch/arm/mach-ixp4xx/ixdp425-pci.c
+@@ -66,7 +66,8 @@
int __init ixdp425_pci_init(void)
{
if (machine_is_ixdp425() || machine_is_ixcdp1100() ||
@@ -168,11 +164,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ixdp425-pci.c
pci_common_init(&ixdp425_pci);
return 0;
}
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-@@ -89,6 +89,14 @@ config MACH_WRT300NV2
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -89,6 +89,14 @@
WRT300N v2 router. For more information on this
platform, see http://openwrt.org
@@ -187,11 +181,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
config ARCH_IXDP425
bool "IXDP425"
help
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-@@ -20,6 +20,7 @@ obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) +=
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -20,6 +20,7 @@
obj-pci-$(CONFIG_MACH_COMPEX) += ixdp425-pci.o
obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
@@ -199,7 +191,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
obj-y += common.o
-@@ -38,6 +39,7 @@ obj-$(CONFIG_MACH_PRONGHORNMETRO) += pro
+@@ -38,6 +39,7 @@
obj-$(CONFIG_MACH_COMPEX) += compex-setup.o
obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
diff --git a/target/linux/ixp4xx/patches-2.6.25/151-lanready_ap1000_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.25/151-lanready_ap1000_mac_plat_info.patch
index e94046e84..f5c5391cc 100644
--- a/target/linux/ixp4xx/patches-2.6.25/151-lanready_ap1000_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/151-lanready_ap1000_mac_plat_info.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ap1000-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/ap1000-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/ap1000-setup.c
-@@ -90,9 +90,37 @@ static struct platform_device ap1000_uar
+--- a/arch/arm/mach-ixp4xx/ap1000-setup.c
++++ b/arch/arm/mach-ixp4xx/ap1000-setup.c
+@@ -90,9 +90,37 @@
.resource = ap1000_uart_resources
};
diff --git a/target/linux/ixp4xx/patches-2.6.25/160-wg302v1_support.patch b/target/linux/ixp4xx/patches-2.6.25/160-wg302v1_support.patch
index b0b43348d..a5a6e5ca9 100644
--- a/target/linux/ixp4xx/patches-2.6.25/160-wg302v1_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/160-wg302v1_support.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-@@ -49,6 +49,14 @@ config MACH_GATEWAY7001
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -49,6 +49,14 @@
7001 Access Point. For more information on this platform,
see http://openwrt.org
@@ -17,11 +15,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
config MACH_WG302V2
bool "Netgear WG302 v2 / WAG302 v2"
select PCI
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-@@ -14,6 +14,7 @@ obj-pci-$(CONFIG_MACH_NSLU2) += nslu2-p
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -14,6 +14,7 @@
obj-pci-$(CONFIG_MACH_NAS100D) += nas100d-pci.o
obj-pci-$(CONFIG_MACH_DSMG600) += dsmg600-pci.o
obj-pci-$(CONFIG_MACH_GATEWAY7001) += gateway7001-pci.o
@@ -29,7 +25,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
obj-pci-$(CONFIG_MACH_WG302V2) += wg302v2-pci.o
obj-pci-$(CONFIG_MACH_FSG) += fsg-pci.o
obj-pci-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-pci.o
-@@ -33,6 +34,7 @@ obj-$(CONFIG_MACH_NSLU2) += nslu2-setup.
+@@ -33,6 +34,7 @@
obj-$(CONFIG_MACH_NAS100D) += nas100d-setup.o
obj-$(CONFIG_MACH_DSMG600) += dsmg600-setup.o
obj-$(CONFIG_MACH_GATEWAY7001) += gateway7001-setup.o
@@ -37,10 +33,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
obj-$(CONFIG_MACH_WG302V2) += wg302v2-setup.o
obj-$(CONFIG_MACH_FSG) += fsg-setup.o
obj-$(CONFIG_MACH_PRONGHORNMETRO) += pronghornmetro-setup.o
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/wg302v1-pci.c
-===================================================================
--- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/wg302v1-pci.c
++++ b/arch/arm/mach-ixp4xx/wg302v1-pci.c
@@ -0,0 +1,63 @@
+/*
+ * arch/arch/mach-ixp4xx/wg302v1-pci.c
@@ -105,10 +99,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/wg302v1-pci.c
+}
+
+subsys_initcall(wg302v1_pci_init);
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/wg302v1-setup.c
-===================================================================
--- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/wg302v1-setup.c
++++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
@@ -0,0 +1,109 @@
+/*
+ * arch/arm/mach-ixp4xx/wg302v1-setup.c
diff --git a/target/linux/ixp4xx/patches-2.6.25/161-wg302v1_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.25/161-wg302v1_mac_plat_info.patch
index 332dbcebd..76066fb9a 100644
--- a/target/linux/ixp4xx/patches-2.6.25/161-wg302v1_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/161-wg302v1_mac_plat_info.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/wg302v1-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/wg302v1-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/wg302v1-setup.c
-@@ -77,9 +77,27 @@ static struct platform_device wg302v1_ua
+--- a/arch/arm/mach-ixp4xx/wg302v1-setup.c
++++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
+@@ -77,9 +77,27 @@
.resource = &wg302v1_uart_resource,
};
diff --git a/target/linux/ixp4xx/patches-2.6.25/162-wg302v1_mem_fixup.patch b/target/linux/ixp4xx/patches-2.6.25/162-wg302v1_mem_fixup.patch
index b1ecf2ec9..f89698cca 100644
--- a/target/linux/ixp4xx/patches-2.6.25/162-wg302v1_mem_fixup.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/162-wg302v1_mem_fixup.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/wg302v1-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/wg302v1-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/wg302v1-setup.c
-@@ -100,6 +100,36 @@ static struct platform_device *wg302v1_d
+--- a/arch/arm/mach-ixp4xx/wg302v1-setup.c
++++ b/arch/arm/mach-ixp4xx/wg302v1-setup.c
+@@ -100,6 +100,36 @@
&wg302_eth[0],
};
@@ -39,7 +37,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/wg302v1-setup.c
static void __init wg302v1_init(void)
{
ixp4xx_sys_init();
-@@ -118,6 +148,7 @@ MACHINE_START(WG302V1, "Netgear WG302 v1
+@@ -118,6 +148,7 @@
/* Maintainer: Imre Kaloz <kaloz@openwrt.org> */
.phys_io = IXP4XX_PERIPHERAL_BASE_PHYS,
.io_pg_offst = ((IXP4XX_PERIPHERAL_BASE_VIRT) >> 18) & 0xfffc,
diff --git a/target/linux/ixp4xx/patches-2.6.25/170-ixdpg425_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.25/170-ixdpg425_mac_plat_info.patch
index e6a387576..1faaa63be 100644
--- a/target/linux/ixp4xx/patches-2.6.25/170-ixdpg425_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/170-ixdpg425_mac_plat_info.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/coyote-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/coyote-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/coyote-setup.c
-@@ -73,9 +73,37 @@ static struct platform_device coyote_uar
+--- a/arch/arm/mach-ixp4xx/coyote-setup.c
++++ b/arch/arm/mach-ixp4xx/coyote-setup.c
+@@ -73,9 +73,37 @@
.resource = &coyote_uart_resource,
};
diff --git a/target/linux/ixp4xx/patches-2.6.25/180-tw5334_support.patch b/target/linux/ixp4xx/patches-2.6.25/180-tw5334_support.patch
index e4a8bf5ee..c403a87fc 100644
--- a/target/linux/ixp4xx/patches-2.6.25/180-tw5334_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/180-tw5334_support.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-@@ -150,6 +150,14 @@ config ARCH_PRPMC1100
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -150,6 +150,14 @@
PrPCM1100 Processor Mezanine Module. For more information on
this platform, see <file:Documentation/arm/IXP4xx>.
@@ -17,11 +15,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
config MACH_NAS100D
bool
prompt "NAS100D"
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-@@ -22,6 +22,7 @@ obj-pci-$(CONFIG_MACH_COMPEX) += ixdp42
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -22,6 +22,7 @@
obj-pci-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-pci.o
obj-pci-$(CONFIG_MACH_SIDEWINDER) += sidewinder-pci.o
obj-pci-$(CONFIG_MACH_AP1000) += ixdp425-pci.o
@@ -29,7 +25,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
obj-y += common.o
-@@ -42,6 +43,7 @@ obj-$(CONFIG_MACH_COMPEX) += compex-setu
+@@ -42,6 +43,7 @@
obj-$(CONFIG_MACH_WRT300NV2) += wrt300nv2-setup.o
obj-$(CONFIG_MACH_SIDEWINDER) += sidewinder-setup.o
obj-$(CONFIG_MACH_AP1000) += ap1000-setup.o
@@ -37,10 +33,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
obj-$(CONFIG_PCI) += $(obj-pci-$(CONFIG_PCI)) common-pci.o
obj-$(CONFIG_IXP4XX_QMGR) += ixp4xx_qmgr.o
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/tw5334-setup.c
-===================================================================
--- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/tw5334-setup.c
++++ b/arch/arm/mach-ixp4xx/tw5334-setup.c
@@ -0,0 +1,162 @@
+/*
+ * arch/arm/mach-ixp4xx/tw5334-setup.c
@@ -204,10 +198,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/tw5334-setup.c
+ .init_machine = tw5334_init,
+MACHINE_END
+#endif
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/tw5334-pci.c
-===================================================================
--- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/tw5334-pci.c
++++ b/arch/arm/mach-ixp4xx/tw5334-pci.c
@@ -0,0 +1,69 @@
+/*
+ * arch/arch/mach-ixp4xx/tw5334-pci.c
@@ -278,11 +270,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/tw5334-pci.c
+}
+
+subsys_initcall(tw5334_pci_init);
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/uncompress.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/uncompress.h
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/uncompress.h
-@@ -42,7 +42,8 @@ static __inline__ void __arch_decomp_set
+--- a/include/asm-arm/arch-ixp4xx/uncompress.h
++++ b/include/asm-arm/arch-ixp4xx/uncompress.h
+@@ -42,7 +42,8 @@
*/
if (machine_is_adi_coyote() || machine_is_gtwx5715() ||
machine_is_gateway7001() || machine_is_wg302v2() ||
diff --git a/target/linux/ixp4xx/patches-2.6.25/190-cambria_support.patch b/target/linux/ixp4xx/patches-2.6.25/190-cambria_support.patch
index fd8eb3038..0f9b5f43c 100644
--- a/target/linux/ixp4xx/patches-2.6.25/190-cambria_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/190-cambria_support.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-@@ -25,6 +25,14 @@ config MACH_AVILA
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -25,6 +25,14 @@
Avila Network Platform. For more information on this platform,
see <file:Documentation/arm/IXP4xx>.
@@ -17,7 +15,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
config MACH_LOFT
bool "Loft"
depends on MACH_AVILA
-@@ -200,7 +208,7 @@ config CPU_IXP46X
+@@ -200,7 +208,7 @@
config CPU_IXP43X
bool
@@ -26,11 +24,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
default y
config MACH_GTWX5715
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Makefile
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
-@@ -7,6 +7,7 @@ obj-pci-n :=
+--- a/arch/arm/mach-ixp4xx/Makefile
++++ b/arch/arm/mach-ixp4xx/Makefile
+@@ -7,6 +7,7 @@
obj-pci-$(CONFIG_ARCH_IXDP4XX) += ixdp425-pci.o
obj-pci-$(CONFIG_MACH_AVILA) += avila-pci.o
@@ -38,7 +34,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
obj-pci-$(CONFIG_MACH_IXDPG425) += ixdpg425-pci.o
obj-pci-$(CONFIG_ARCH_ADI_COYOTE) += coyote-pci.o
obj-pci-$(CONFIG_MACH_GTWX5715) += gtwx5715-pci.o
-@@ -28,6 +29,7 @@ obj-y += common.o
+@@ -28,6 +29,7 @@
obj-$(CONFIG_ARCH_IXDP4XX) += ixdp425-setup.o
obj-$(CONFIG_MACH_AVILA) += avila-setup.o
@@ -46,10 +42,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Makefile
obj-$(CONFIG_MACH_IXDPG425) += coyote-setup.o
obj-$(CONFIG_ARCH_ADI_COYOTE) += coyote-setup.o
obj-$(CONFIG_MACH_GTWX5715) += gtwx5715-setup.o
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/cambria-pci.c
-===================================================================
--- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/cambria-pci.c
++++ b/arch/arm/mach-ixp4xx/cambria-pci.c
@@ -0,0 +1,74 @@
+/*
+ * arch/arch/mach-ixp4xx/cambria-pci.c
@@ -125,10 +119,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/cambria-pci.c
+}
+
+subsys_initcall(cambria_pci_init);
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/cambria-setup.c
-===================================================================
--- /dev/null
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/cambria-setup.c
++++ b/arch/arm/mach-ixp4xx/cambria-setup.c
@@ -0,0 +1,444 @@
+/*
+ * arch/arm/mach-ixp4xx/cambria-setup.c
@@ -574,10 +566,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/cambria-setup.c
+ .init_machine = cambria_init,
+MACHINE_END
+#endif
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/hardware.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/hardware.h
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/hardware.h
+--- a/include/asm-arm/arch-ixp4xx/hardware.h
++++ b/include/asm-arm/arch-ixp4xx/hardware.h
@@ -18,7 +18,7 @@
#define __ASM_ARCH_HARDWARE_H__
diff --git a/target/linux/ixp4xx/patches-2.6.25/200-npe_driver.patch b/target/linux/ixp4xx/patches-2.6.25/200-npe_driver.patch
index 9b34b8a2b..394c3a189 100644
--- a/target/linux/ixp4xx/patches-2.6.25/200-npe_driver.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/200-npe_driver.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/drivers/net/arm/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/net/arm/Kconfig
-+++ linux-2.6.25.4/drivers/net/arm/Kconfig
-@@ -47,3 +47,11 @@ config EP93XX_ETH
+--- a/drivers/net/arm/Kconfig
++++ b/drivers/net/arm/Kconfig
+@@ -47,3 +47,11 @@
help
This is a driver for the ethernet hardware included in EP93xx CPUs.
Say Y if you are building a kernel for EP93xx based devices.
@@ -14,19 +12,15 @@ Index: linux-2.6.25.4/drivers/net/arm/Kconfig
+ help
+ Say Y here if you want to use built-in Ethernet ports
+ on IXP4xx processor.
-Index: linux-2.6.25.4/drivers/net/arm/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/net/arm/Makefile
-+++ linux-2.6.25.4/drivers/net/arm/Makefile
-@@ -9,3 +9,4 @@ obj-$(CONFIG_ARM_ETHER3) += ether3.o
+--- a/drivers/net/arm/Makefile
++++ b/drivers/net/arm/Makefile
+@@ -9,3 +9,4 @@
obj-$(CONFIG_ARM_ETHER1) += ether1.o
obj-$(CONFIG_ARM_AT91_ETHER) += at91_ether.o
obj-$(CONFIG_EP93XX_ETH) += ep93xx_eth.o
+obj-$(CONFIG_IXP4XX_ETH) += ixp4xx_eth.o
-Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
-===================================================================
--- /dev/null
-+++ linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
++++ b/drivers/net/arm/ixp4xx_eth.c
@@ -0,0 +1,1265 @@
+/*
+ * Intel IXP4xx Ethernet driver for Linux
@@ -1293,11 +1287,9 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
+MODULE_ALIAS("platform:ixp4xx_eth");
+module_init(eth_init_module);
+module_exit(eth_cleanup_module);
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-@@ -448,7 +448,9 @@ int npe_send_message(struct npe *npe, co
+--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
++++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+@@ -448,7 +448,9 @@
return -ETIMEDOUT;
}
@@ -1307,7 +1299,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ixp4xx_npe.c
return 0;
}
-@@ -484,7 +486,9 @@ int npe_recv_message(struct npe *npe, vo
+@@ -484,7 +486,9 @@
return -ETIMEDOUT;
}
@@ -1317,11 +1309,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ixp4xx_npe.c
return 0;
}
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
-@@ -184,6 +184,8 @@ void qmgr_release_queue(unsigned int que
+--- a/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
++++ b/arch/arm/mach-ixp4xx/ixp4xx_qmgr.c
+@@ -184,6 +184,8 @@
case 3: mask[0] = 0xFF; break;
}
diff --git a/target/linux/ixp4xx/patches-2.6.25/201-npe_driver_print_license_location.patch b/target/linux/ixp4xx/patches-2.6.25/201-npe_driver_print_license_location.patch
index c269caf9d..a4c031aca 100644
--- a/target/linux/ixp4xx/patches-2.6.25/201-npe_driver_print_license_location.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/201-npe_driver_print_license_location.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-@@ -592,6 +592,8 @@ int npe_load_firmware(struct npe *npe, c
+--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
++++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+@@ -592,6 +592,8 @@
npe_reset(npe);
#endif
diff --git a/target/linux/ixp4xx/patches-2.6.25/202-npe_driver_switch_support.patch b/target/linux/ixp4xx/patches-2.6.25/202-npe_driver_switch_support.patch
index 510401768..f0be25315 100644
--- a/target/linux/ixp4xx/patches-2.6.25/202-npe_driver_switch_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/202-npe_driver_switch_support.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/net/arm/ixp4xx_eth.c
-+++ linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
-@@ -165,14 +165,15 @@ struct port {
+--- a/drivers/net/arm/ixp4xx_eth.c
++++ b/drivers/net/arm/ixp4xx_eth.c
+@@ -165,14 +165,15 @@
struct net_device *netdev;
struct napi_struct napi;
struct net_device_stats stat;
@@ -20,7 +18,7 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
};
/* NPE message structure */
-@@ -316,12 +317,13 @@ static void mdio_write(struct net_device
+@@ -316,12 +317,13 @@
spin_unlock_irqrestore(&mdio_lock, flags);
}
@@ -36,7 +34,7 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
while (cycles < MAX_MII_RESET_RETRIES) {
if (!(mdio_read(dev, phy_id, MII_BMCR) & BMCR_RESET)) {
-@@ -335,12 +337,12 @@ static void phy_reset(struct net_device
+@@ -335,12 +337,12 @@
cycles++;
}
@@ -52,7 +50,7 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
__raw_writel(DEFAULT_TX_CNTRL0 & ~TX_CNTRL0_HALFDUPLEX,
&port->regs->tx_control[0]);
else
-@@ -348,7 +350,7 @@ static void eth_set_duplex(struct port *
+@@ -348,7 +350,7 @@
&port->regs->tx_control[0]);
}
@@ -61,7 +59,7 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
static void phy_check_media(struct port *port, int init)
{
if (mii_check_media(&port->mii, 1, init))
-@@ -367,7 +369,63 @@ static void phy_check_media(struct port
+@@ -367,7 +369,63 @@
}
}
}
@@ -125,7 +123,7 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
static void mdio_thread(struct work_struct *work)
{
-@@ -792,9 +850,12 @@ static int eth_ioctl(struct net_device *
+@@ -792,9 +850,12 @@
if (!netif_running(dev))
return -EINVAL;
@@ -140,7 +138,7 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
return err;
}
-@@ -947,7 +1008,8 @@ static int eth_open(struct net_device *d
+@@ -947,7 +1008,8 @@
}
}
@@ -150,7 +148,7 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
memset(&msg, 0, sizeof(msg));
msg.cmd = NPE_VLAN_SETRXQOSENTRY;
-@@ -1107,10 +1169,8 @@ static int eth_close(struct net_device *
+@@ -1107,10 +1169,8 @@
printk(KERN_CRIT "%s: unable to disable loopback\n",
dev->name);
@@ -163,7 +161,7 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
if (!ports_open)
qmgr_disable_irq(TXDONE_QUEUE);
-@@ -1120,6 +1180,42 @@ static int eth_close(struct net_device *
+@@ -1120,6 +1180,42 @@
return 0;
}
@@ -206,7 +204,7 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
static int __devinit eth_init_one(struct platform_device *pdev)
{
struct port *port;
-@@ -1192,20 +1288,7 @@ static int __devinit eth_init_one(struct
+@@ -1192,20 +1288,7 @@
__raw_writel(DEFAULT_CORE_CNTRL, &port->regs->core_control);
udelay(50);
@@ -228,11 +226,9 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
INIT_DELAYED_WORK(&port->mdio_thread, mdio_thread);
return 0;
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/platform.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/platform.h
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/platform.h
-@@ -95,12 +95,15 @@ struct sys_timer;
+--- a/include/asm-arm/arch-ixp4xx/platform.h
++++ b/include/asm-arm/arch-ixp4xx/platform.h
+@@ -95,12 +95,15 @@
#define IXP4XX_ETH_NPEB 0x10
#define IXP4XX_ETH_NPEC 0x20
diff --git a/target/linux/ixp4xx/patches-2.6.25/203-npe_driver_phy_reset_autoneg.patch b/target/linux/ixp4xx/patches-2.6.25/203-npe_driver_phy_reset_autoneg.patch
index b53bf5f79..699763f51 100644
--- a/target/linux/ixp4xx/patches-2.6.25/203-npe_driver_phy_reset_autoneg.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/203-npe_driver_phy_reset_autoneg.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/net/arm/ixp4xx_eth.c
-+++ linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
-@@ -322,8 +322,12 @@ static void phy_reset(struct net_device
+--- a/drivers/net/arm/ixp4xx_eth.c
++++ b/drivers/net/arm/ixp4xx_eth.c
+@@ -322,8 +322,12 @@
struct port *port = netdev_priv(dev);
int phy_id = port->mii[idx].phy_id;
int cycles = 0;
@@ -16,7 +14,7 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
while (cycles < MAX_MII_RESET_RETRIES) {
if (!(mdio_read(dev, phy_id, MII_BMCR) & BMCR_RESET)) {
-@@ -331,13 +335,23 @@ static void phy_reset(struct net_device
+@@ -331,13 +335,23 @@
printk(KERN_DEBUG "%s: phy_reset() took %i cycles\n",
dev->name, cycles);
#endif
diff --git a/target/linux/ixp4xx/patches-2.6.25/204-npe_driver_ixp43x_support.patch b/target/linux/ixp4xx/patches-2.6.25/204-npe_driver_ixp43x_support.patch
index 264a99ef4..411e0cb42 100644
--- a/target/linux/ixp4xx/patches-2.6.25/204-npe_driver_ixp43x_support.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/204-npe_driver_ixp43x_support.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/ixp4xx_npe.c
-@@ -575,8 +575,8 @@ int npe_load_firmware(struct npe *npe, c
+--- a/arch/arm/mach-ixp4xx/ixp4xx_npe.c
++++ b/arch/arm/mach-ixp4xx/ixp4xx_npe.c
+@@ -575,8 +575,8 @@
for (i = 0; i < image->size; i++)
image->data[i] = swab32(image->data[i]);
@@ -13,7 +11,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ixp4xx_npe.c
"IXP42x\n");
goto err;
}
-@@ -598,7 +598,7 @@ int npe_load_firmware(struct npe *npe, c
+@@ -598,7 +598,7 @@
"revision 0x%X:%X\n", (image->id >> 16) & 0xFF,
(image->id >> 8) & 0xFF, image->id & 0xFF);
@@ -22,10 +20,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/ixp4xx_npe.c
if (!npe->id)
instr_size = NPE_A_42X_INSTR_SIZE;
else
-Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/net/arm/ixp4xx_eth.c
-+++ linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
+--- a/drivers/net/arm/ixp4xx_eth.c
++++ b/drivers/net/arm/ixp4xx_eth.c
@@ -32,6 +32,7 @@
#include <linux/kernel.h>
#include <linux/mii.h>
@@ -34,7 +30,7 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
#include <asm/arch/npe.h>
#include <asm/arch/qmgr.h>
-@@ -1338,12 +1339,16 @@ static struct platform_driver drv = {
+@@ -1338,12 +1339,16 @@
static int __init eth_init_module(void)
{
@@ -55,11 +51,9 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
__raw_writel(DEFAULT_CORE_CNTRL, &mdio_regs->core_control);
return platform_driver_register(&drv);
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/cpu.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/cpu.h
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/cpu.h
-@@ -34,6 +34,8 @@ static inline u32 ixp4xx_read_feature_bi
+--- a/include/asm-arm/arch-ixp4xx/cpu.h
++++ b/include/asm-arm/arch-ixp4xx/cpu.h
+@@ -34,6 +34,8 @@
val &= ~IXP4XX_FEATURE_RESERVED;
if (!cpu_is_ixp46x())
val &= ~IXP4XX_FEATURE_IXP46X_ONLY;
@@ -68,10 +62,8 @@ Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/cpu.h
return val;
}
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
+--- a/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
++++ b/include/asm-arm/arch-ixp4xx/ixp4xx-regs.h
@@ -628,11 +628,12 @@
#define IXP4XX_FEATURE_XSCALE_MAX_FREQ (3 << 22)
#define IXP4XX_FEATURE_RESERVED (0xFF << 24)
diff --git a/target/linux/ixp4xx/patches-2.6.25/210-npe_hss.patch b/target/linux/ixp4xx/patches-2.6.25/210-npe_hss.patch
index 50683fdd5..86949c30b 100644
--- a/target/linux/ixp4xx/patches-2.6.25/210-npe_hss.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/210-npe_hss.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/drivers/net/wan/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/net/wan/Kconfig
-+++ linux-2.6.25.4/drivers/net/wan/Kconfig
-@@ -338,6 +338,15 @@ config DSCC4_PCI_RST
+--- a/drivers/net/wan/Kconfig
++++ b/drivers/net/wan/Kconfig
+@@ -338,6 +338,15 @@
Say Y if your card supports this feature.
@@ -18,11 +16,9 @@ Index: linux-2.6.25.4/drivers/net/wan/Kconfig
config DLCI
tristate "Frame Relay DLCI support"
---help---
-Index: linux-2.6.25.4/drivers/net/wan/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/net/wan/Makefile
-+++ linux-2.6.25.4/drivers/net/wan/Makefile
-@@ -42,6 +42,7 @@ obj-$(CONFIG_C101) += c101.o
+--- a/drivers/net/wan/Makefile
++++ b/drivers/net/wan/Makefile
+@@ -42,6 +42,7 @@
obj-$(CONFIG_WANXL) += wanxl.o
obj-$(CONFIG_PCI200SYN) += pci200syn.o
obj-$(CONFIG_PC300TOO) += pc300too.o
@@ -30,10 +26,8 @@ Index: linux-2.6.25.4/drivers/net/wan/Makefile
clean-files := wanxlfw.inc
$(obj)/wanxl.o: $(obj)/wanxlfw.inc
-Index: linux-2.6.25.4/drivers/net/wan/ixp4xx_hss.c
-===================================================================
--- /dev/null
-+++ linux-2.6.25.4/drivers/net/wan/ixp4xx_hss.c
++++ b/drivers/net/wan/ixp4xx_hss.c
@@ -0,0 +1,2886 @@
+/*
+ * Intel IXP4xx HSS (synchronous serial port) driver for Linux
diff --git a/target/linux/ixp4xx/patches-2.6.25/294-eeprom_new_notifier.patch b/target/linux/ixp4xx/patches-2.6.25/294-eeprom_new_notifier.patch
index 5849a7b1a..165ca6a80 100644
--- a/target/linux/ixp4xx/patches-2.6.25/294-eeprom_new_notifier.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/294-eeprom_new_notifier.patch
@@ -1,7 +1,5 @@
-Index: linux-2.6.25.4/drivers/i2c/chips/eeprom.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/i2c/chips/eeprom.c
-+++ linux-2.6.25.4/drivers/i2c/chips/eeprom.c
+--- a/drivers/i2c/chips/eeprom.c
++++ b/drivers/i2c/chips/eeprom.c
@@ -33,6 +33,8 @@
#include <linux/jiffies.h>
#include <linux/i2c.h>
@@ -11,7 +9,7 @@ Index: linux-2.6.25.4/drivers/i2c/chips/eeprom.c
/* Addresses to scan */
static const unsigned short normal_i2c[] = { 0x50, 0x51, 0x52, 0x53, 0x54,
-@@ -41,26 +43,7 @@ static const unsigned short normal_i2c[]
+@@ -41,26 +43,7 @@
/* Insmod parameters */
I2C_CLIENT_INSMOD_1(eeprom);
@@ -39,7 +37,7 @@ Index: linux-2.6.25.4/drivers/i2c/chips/eeprom.c
static int eeprom_attach_adapter(struct i2c_adapter *adapter);
static int eeprom_detect(struct i2c_adapter *adapter, int address, int kind);
-@@ -197,6 +180,7 @@ static int eeprom_detect(struct i2c_adap
+@@ -197,6 +180,7 @@
data->valid = 0;
mutex_init(&data->update_lock);
data->nature = UNKNOWN;
@@ -47,7 +45,7 @@ Index: linux-2.6.25.4/drivers/i2c/chips/eeprom.c
/* Tell the I2C layer a new client has arrived */
if ((err = i2c_attach_client(new_client)))
-@@ -224,6 +208,9 @@ static int eeprom_detect(struct i2c_adap
+@@ -224,6 +208,9 @@
if (err)
goto exit_detach;
@@ -57,7 +55,7 @@ Index: linux-2.6.25.4/drivers/i2c/chips/eeprom.c
return 0;
exit_detach:
-@@ -249,6 +236,41 @@ static int eeprom_detach_client(struct i
+@@ -249,6 +236,41 @@
return 0;
}
@@ -99,10 +97,8 @@ Index: linux-2.6.25.4/drivers/i2c/chips/eeprom.c
static int __init eeprom_init(void)
{
return i2c_add_driver(&eeprom_driver);
-Index: linux-2.6.25.4/include/linux/eeprom.h
-===================================================================
--- /dev/null
-+++ linux-2.6.25.4/include/linux/eeprom.h
++++ b/include/linux/eeprom.h
@@ -0,0 +1,71 @@
+#ifndef _LINUX_EEPROM_H
+#define _LINUX_EEPROM_H
@@ -175,11 +171,9 @@ Index: linux-2.6.25.4/include/linux/eeprom.h
+extern int unregister_eeprom_notifier(struct notifier_block *nb);
+
+#endif /* _LINUX_EEPROM_H */
-Index: linux-2.6.25.4/include/linux/notifier.h
-===================================================================
---- linux-2.6.25.4.orig/include/linux/notifier.h
-+++ linux-2.6.25.4/include/linux/notifier.h
-@@ -248,5 +248,8 @@ extern struct blocking_notifier_head reb
+--- a/include/linux/notifier.h
++++ b/include/linux/notifier.h
+@@ -248,5 +248,8 @@
#define VT_WRITE 0x0003 /* A char got output */
#define VT_UPDATE 0x0004 /* A bigger update occurred */
diff --git a/target/linux/ixp4xx/patches-2.6.25/295-latch_led_driver.patch b/target/linux/ixp4xx/patches-2.6.25/295-latch_led_driver.patch
index 7733abc59..0266aa253 100644
--- a/target/linux/ixp4xx/patches-2.6.25/295-latch_led_driver.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/295-latch_led_driver.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/drivers/leds/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/drivers/leds/Kconfig
-+++ linux-2.6.25.4/drivers/leds/Kconfig
-@@ -125,6 +125,12 @@ config LEDS_GPIO
+--- a/drivers/leds/Kconfig
++++ b/drivers/leds/Kconfig
+@@ -125,6 +125,12 @@
outputs. To be useful the particular board must have LEDs
and they must be connected to the GPIO lines.
@@ -15,10 +13,8 @@ Index: linux-2.6.25.4/drivers/leds/Kconfig
config LEDS_CM_X270
tristate "LED Support for the CM-X270 LEDs"
depends on LEDS_CLASS && MACH_ARMCORE
-Index: linux-2.6.25.4/drivers/leds/leds-latch.c
-===================================================================
--- /dev/null
-+++ linux-2.6.25.4/drivers/leds/leds-latch.c
++++ b/drivers/leds/leds-latch.c
@@ -0,0 +1,141 @@
+/*
+ * LEDs driver for Memory Latched Devices
@@ -161,11 +157,9 @@ Index: linux-2.6.25.4/drivers/leds/leds-latch.c
+MODULE_AUTHOR("Chris Lang <clang@gateworks.com>");
+MODULE_DESCRIPTION("Latch LED driver");
+MODULE_LICENSE("GPL");
-Index: linux-2.6.25.4/drivers/leds/Makefile
-===================================================================
---- linux-2.6.25.4.orig/drivers/leds/Makefile
-+++ linux-2.6.25.4/drivers/leds/Makefile
-@@ -19,6 +19,7 @@ obj-$(CONFIG_LEDS_H1940) += leds-h1940.
+--- a/drivers/leds/Makefile
++++ b/drivers/leds/Makefile
+@@ -19,6 +19,7 @@
obj-$(CONFIG_LEDS_COBALT_QUBE) += leds-cobalt-qube.o
obj-$(CONFIG_LEDS_COBALT_RAQ) += leds-cobalt-raq.o
obj-$(CONFIG_LEDS_GPIO) += leds-gpio.o
@@ -173,11 +167,9 @@ Index: linux-2.6.25.4/drivers/leds/Makefile
obj-$(CONFIG_LEDS_CM_X270) += leds-cm-x270.o
obj-$(CONFIG_LEDS_CLEVO_MAIL) += leds-clevo-mail.o
obj-$(CONFIG_LEDS_HP6XX) += leds-hp6xx.o
-Index: linux-2.6.25.4/include/linux/leds.h
-===================================================================
---- linux-2.6.25.4.orig/include/linux/leds.h
-+++ linux-2.6.25.4/include/linux/leds.h
-@@ -136,5 +136,18 @@ struct gpio_led_platform_data {
+--- a/include/linux/leds.h
++++ b/include/linux/leds.h
+@@ -136,5 +136,18 @@
struct gpio_led *leds;
};
diff --git a/target/linux/ixp4xx/patches-2.6.25/296-avila_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.25/296-avila_mac_plat_info.patch
index 26267c827..c1c584c61 100644
--- a/target/linux/ixp4xx/patches-2.6.25/296-avila_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/296-avila_mac_plat_info.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/avila-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -132,6 +132,31 @@ static struct platform_device avila_pata
+--- a/arch/arm/mach-ixp4xx/avila-setup.c
++++ b/arch/arm/mach-ixp4xx/avila-setup.c
+@@ -132,6 +132,31 @@
.resource = avila_pata_resources,
};
@@ -34,7 +32,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
static struct platform_device *avila_devices[] __initdata = {
&avila_i2c_gpio,
&avila_flash,
-@@ -159,6 +184,8 @@ static void __init avila_init(void)
+@@ -159,6 +184,8 @@
platform_device_register(&avila_pata);
diff --git a/target/linux/ixp4xx/patches-2.6.25/300-avila_fetch_mac.patch b/target/linux/ixp4xx/patches-2.6.25/300-avila_fetch_mac.patch
index 1d154c669..db25efbea 100644
--- a/target/linux/ixp4xx/patches-2.6.25/300-avila_fetch_mac.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/300-avila_fetch_mac.patch
@@ -1,7 +1,5 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/avila-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
+--- a/arch/arm/mach-ixp4xx/avila-setup.c
++++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -14,10 +14,18 @@
#include <linux/kernel.h>
#include <linux/init.h>
@@ -35,7 +33,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
static struct flash_platform_data avila_flash_data = {
.map_name = "cfi_probe",
.width = 2,
-@@ -163,10 +178,160 @@ static struct platform_device *avila_dev
+@@ -163,10 +178,160 @@
&avila_uart
};
@@ -196,7 +194,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
avila_flash_resource.start = IXP4XX_EXP_BUS_BASE(0);
avila_flash_resource.end =
IXP4XX_EXP_BUS_BASE(0) + ixp4xx_exp_bus_size - 1;
-@@ -184,9 +349,28 @@ static void __init avila_init(void)
+@@ -184,9 +349,28 @@
platform_device_register(&avila_pata);
diff --git a/target/linux/ixp4xx/patches-2.6.25/301-avila_led.patch b/target/linux/ixp4xx/patches-2.6.25/301-avila_led.patch
index 09e0e2376..7a079f537 100644
--- a/target/linux/ixp4xx/patches-2.6.25/301-avila_led.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/301-avila_led.patch
@@ -1,7 +1,5 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/avila-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
+--- a/arch/arm/mach-ixp4xx/avila-setup.c
++++ b/arch/arm/mach-ixp4xx/avila-setup.c
@@ -26,6 +26,7 @@
# include <linux/eeprom.h>
#endif
@@ -10,7 +8,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
#include <linux/i2c-gpio.h>
#include <asm/types.h>
-@@ -172,6 +173,72 @@ static struct platform_device avila_npec
+@@ -172,6 +173,72 @@
.dev.platform_data = &avila_npec_data,
};
@@ -83,7 +81,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
static struct platform_device *avila_devices[] __initdata = {
&avila_i2c_gpio,
&avila_flash,
-@@ -182,6 +249,8 @@ static void __init avila_gw23xx_setup(vo
+@@ -182,6 +249,8 @@
{
platform_device_register(&avila_npeb_device);
platform_device_register(&avila_npec_device);
@@ -92,7 +90,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
}
#ifdef CONFIG_SENSORS_EEPROM
-@@ -189,6 +258,8 @@ static void __init avila_gw2342_setup(vo
+@@ -189,6 +258,8 @@
{
platform_device_register(&avila_npeb_device);
platform_device_register(&avila_npec_device);
@@ -101,7 +99,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
}
static void __init avila_gw2345_setup(void)
-@@ -199,22 +270,30 @@ static void __init avila_gw2345_setup(vo
+@@ -199,22 +270,30 @@
avila_npec_data.phy = 5; /* port 5 of the KS8995 switch */
platform_device_register(&avila_npec_device);
@@ -132,7 +130,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
}
static void __init avila_gw2355_setup(void)
-@@ -225,11 +304,29 @@ static void __init avila_gw2355_setup(vo
+@@ -225,11 +304,29 @@
avila_npec_data.phy = 16;
platform_device_register(&avila_npec_device);
@@ -162,10 +160,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
}
static struct avila_board_info avila_boards[] __initdata = {
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/avila.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/avila.h
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/avila.h
+--- a/include/asm-arm/arch-ixp4xx/avila.h
++++ b/include/asm-arm/arch-ixp4xx/avila.h
@@ -36,4 +36,6 @@
#define AVILA_PCI_INTC_PIN 9
#define AVILA_PCI_INTD_PIN 8
diff --git a/target/linux/ixp4xx/patches-2.6.25/302-avila_gpio_device.patch b/target/linux/ixp4xx/patches-2.6.25/302-avila_gpio_device.patch
index 741c45965..53b8b632a 100644
--- a/target/linux/ixp4xx/patches-2.6.25/302-avila_gpio_device.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/302-avila_gpio_device.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/avila-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -239,10 +239,28 @@ static struct platform_device avila_latc
+--- a/arch/arm/mach-ixp4xx/avila-setup.c
++++ b/arch/arm/mach-ixp4xx/avila-setup.c
+@@ -239,10 +239,28 @@
.dev.platform_data = &avila_latch_leds_data,
};
@@ -32,10 +30,8 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
};
static void __init avila_gw23xx_setup(void)
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/avila.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/avila.h
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/avila.h
+--- a/include/asm-arm/arch-ixp4xx/avila.h
++++ b/include/asm-arm/arch-ixp4xx/avila.h
@@ -39,3 +39,6 @@
/* User LEDs */
#define AVILA_GW23XX_LED_USER_GPIO 3
diff --git a/target/linux/ixp4xx/patches-2.6.25/303-avila_gw23x7_phy_quirk.patch b/target/linux/ixp4xx/patches-2.6.25/303-avila_gw23x7_phy_quirk.patch
index 792acc0f3..ece08fd17 100644
--- a/target/linux/ixp4xx/patches-2.6.25/303-avila_gw23x7_phy_quirk.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/303-avila_gw23x7_phy_quirk.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/avila-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
-@@ -294,6 +294,7 @@ static void __init avila_gw2345_setup(vo
+--- a/arch/arm/mach-ixp4xx/avila-setup.c
++++ b/arch/arm/mach-ixp4xx/avila-setup.c
+@@ -294,6 +294,7 @@
static void __init avila_gw2347_setup(void)
{
@@ -10,7 +8,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
platform_device_register(&avila_npeb_device);
avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
-@@ -338,6 +339,7 @@ static void __init avila_gw2355_setup(vo
+@@ -338,6 +339,7 @@
static void __init avila_gw2357_setup(void)
{
@@ -18,11 +16,9 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/avila-setup.c
platform_device_register(&avila_npeb_device);
avila_gpio_leds[0].gpio = AVILA_GW23X7_LED_USER_GPIO;
-Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
-===================================================================
---- linux-2.6.25.4.orig/drivers/net/arm/ixp4xx_eth.c
-+++ linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
-@@ -348,6 +348,14 @@ static void phy_reset(struct net_device
+--- a/drivers/net/arm/ixp4xx_eth.c
++++ b/drivers/net/arm/ixp4xx_eth.c
+@@ -348,6 +348,14 @@
return;
}
@@ -37,11 +33,9 @@ Index: linux-2.6.25.4/drivers/net/arm/ixp4xx_eth.c
/* restart auto negotiation */
bmcr = mdio_read(dev, phy_id, MII_BMCR);
bmcr |= (BMCR_ANENABLE | BMCR_ANRESTART);
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/platform.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/platform.h
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/platform.h
-@@ -104,6 +104,8 @@ struct eth_plat_info {
+--- a/include/asm-arm/arch-ixp4xx/platform.h
++++ b/include/asm-arm/arch-ixp4xx/platform.h
+@@ -104,6 +104,8 @@
u8 txreadyq;
u8 hwaddr[6];
u32 phy_mask;
diff --git a/target/linux/ixp4xx/patches-2.6.25/310-gtwx5717_spi_bus.patch b/target/linux/ixp4xx/patches-2.6.25/310-gtwx5717_spi_bus.patch
index 4d26fa6ce..688085291 100644
--- a/target/linux/ixp4xx/patches-2.6.25/310-gtwx5717_spi_bus.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/310-gtwx5717_spi_bus.patch
@@ -1,7 +1,5 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
++++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
@@ -29,6 +29,8 @@
#include <linux/serial_8250.h>
#include <linux/slab.h>
@@ -11,7 +9,7 @@ Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/gtwx5715-setup.c
#include <asm/types.h>
#include <asm/setup.h>
#include <asm/memory.h>
-@@ -121,9 +123,41 @@ static struct platform_device gtwx5715_f
+@@ -121,9 +123,41 @@
.resource = >wx5715_flash_resource,
};
diff --git a/target/linux/ixp4xx/patches-2.6.25/311-gtwx5717_mac_plat_info.patch b/target/linux/ixp4xx/patches-2.6.25/311-gtwx5717_mac_plat_info.patch
index 2ae0f9af4..90f750e7a 100644
--- a/target/linux/ixp4xx/patches-2.6.25/311-gtwx5717_mac_plat_info.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/311-gtwx5717_mac_plat_info.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/gtwx5715-setup.c
-@@ -154,10 +154,37 @@ static struct platform_device gtwx5715_s
+--- a/arch/arm/mach-ixp4xx/gtwx5715-setup.c
++++ b/arch/arm/mach-ixp4xx/gtwx5715-setup.c
+@@ -154,10 +154,37 @@
},
};
diff --git a/target/linux/ixp4xx/patches-2.6.25/400-dmabounce.patch b/target/linux/ixp4xx/patches-2.6.25/400-dmabounce.patch
index 9831cd515..7dae29149 100644
--- a/target/linux/ixp4xx/patches-2.6.25/400-dmabounce.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/400-dmabounce.patch
@@ -1,8 +1,6 @@
-Index: linux-2.6.25.4/arch/arm/common/dmabounce.c
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/common/dmabounce.c
-+++ linux-2.6.25.4/arch/arm/common/dmabounce.c
-@@ -117,6 +117,10 @@ alloc_safe_buffer(struct dmabounce_devic
+--- a/arch/arm/common/dmabounce.c
++++ b/arch/arm/common/dmabounce.c
+@@ -117,6 +117,10 @@
} else if (size <= device_info->large.size) {
pool = &device_info->large;
} else {
@@ -13,11 +11,9 @@ Index: linux-2.6.25.4/arch/arm/common/dmabounce.c
pool = NULL;
}
-Index: linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-===================================================================
---- linux-2.6.25.4.orig/arch/arm/mach-ixp4xx/Kconfig
-+++ linux-2.6.25.4/arch/arm/mach-ixp4xx/Kconfig
-@@ -236,6 +236,11 @@ config DMABOUNCE
+--- a/arch/arm/mach-ixp4xx/Kconfig
++++ b/arch/arm/mach-ixp4xx/Kconfig
+@@ -236,6 +236,11 @@
default y
depends on PCI
diff --git a/target/linux/ixp4xx/patches-2.6.25/401-avila_pci_dev.patch b/target/linux/ixp4xx/patches-2.6.25/401-avila_pci_dev.patch
index 74bc9ae42..2e2023002 100644
--- a/target/linux/ixp4xx/patches-2.6.25/401-avila_pci_dev.patch
+++ b/target/linux/ixp4xx/patches-2.6.25/401-avila_pci_dev.patch
@@ -1,7 +1,5 @@
-Index: linux-2.6.25.4/include/asm-arm/arch-ixp4xx/avila.h
-===================================================================
---- linux-2.6.25.4.orig/include/asm-arm/arch-ixp4xx/avila.h
-+++ linux-2.6.25.4/include/asm-arm/arch-ixp4xx/avila.h
+--- a/include/asm-arm/arch-ixp4xx/avila.h
++++ b/include/asm-arm/arch-ixp4xx/avila.h
@@ -25,7 +25,7 @@
/*
* AVILA PCI IRQs
--
2.20.1